2 # Copyright 2015-2021 The OpenSSL Project Authors. All Rights Reserved.
4 # Licensed under the Apache License 2.0 (the "License"). You may not use
5 # this file except in compliance with the License. You can obtain a copy
6 # in the file LICENSE in the source distribution or at
7 # https://www.openssl.org/source/license.html
9 # For manually running these tests, set specific environment variables like this:
10 # CTLOG_FILE=test/ct/log_list.cnf
11 # TEST_CERTS_DIR=test/certs
12 # For details on the environment variables needed, see test/README.ssltest.md
18 use File::Compare qw/compare_text/;
20 use OpenSSL::Test qw/:DEFAULT srctop_dir srctop_file bldtop_file bldtop_dir/;
21 use OpenSSL::Test::Utils qw/disabled alldisabled available_protocols/;
24 setup("test_ssl_new");
27 use lib srctop_dir('Configurations');
28 use lib bldtop_dir('.');
30 my $no_fips = disabled('fips') || ($ENV{NO_FIPS} // 0);
32 $ENV{TEST_CERTS_DIR} = srctop_dir("test", "certs");
35 if (defined $ENV{SSL_TESTS}) {
36 my @conf_list = split(' ', $ENV{SSL_TESTS});
37 foreach my $conf_file (@conf_list) {
38 push (@conf_srcs, glob(srctop_file("test", "ssl-tests", $conf_file)));
40 plan tests => scalar @conf_srcs;
42 @conf_srcs = glob(srctop_file("test", "ssl-tests", "*.cnf.in"));
43 # We hard-code the number of tests to double-check that the globbing above
44 # finds all files as expected.
47 map { s/;.*// } @conf_srcs if $^O eq "VMS";
48 my @conf_files = map { basename($_, ".in") } @conf_srcs;
49 map { s/\^// } @conf_files if $^O eq "VMS";
51 # Some test results depend on the configuration of enabled protocols. We only
52 # verify generated sources in the default configuration.
53 my $is_default_tls = (disabled("ssl3") && !disabled("tls1") &&
54 !disabled("tls1_1") && !disabled("tls1_2") &&
55 !disabled("tls1_3") && (!disabled("ec") || !disabled("dh")));
57 my $is_default_dtls = (!disabled("dtls1") && !disabled("dtls1_2"));
59 my @all_pre_tls1_3 = ("ssl3", "tls1", "tls1_1", "tls1_2");
60 my $no_tls = alldisabled(available_protocols("tls"));
61 my $no_tls_below1_3 = $no_tls || (disabled("tls1_2") && !disabled("tls1_3"));
62 if (!$no_tls && $no_tls_below1_3 && disabled("ec") && disabled("dh")) {
65 my $no_pre_tls1_3 = alldisabled(@all_pre_tls1_3);
66 my $no_dtls = alldisabled(available_protocols("dtls"));
67 my $no_quic = disabled("quic");
68 my $no_npn = disabled("nextprotoneg");
69 my $no_ct = disabled("ct");
70 my $no_ec = disabled("ec");
71 my $no_dh = disabled("dh");
72 my $no_dsa = disabled("dsa");
73 my $no_ec2m = disabled("ec2m");
74 my $no_ocsp = disabled("ocsp");
76 # Add your test here if the test conf.in generates test cases and/or
77 # expectations dynamically based on the OpenSSL compile-time config.
78 my %conf_dependent_tests = (
79 "02-protocol-version.cnf" => !$is_default_tls,
80 "04-client_auth.cnf" => !$is_default_tls || !$is_default_dtls
82 "05-sni.cnf" => disabled("tls1_1"),
83 "07-dtls-protocol-version.cnf" => !$is_default_dtls || !disabled("sctp"),
84 "10-resumption.cnf" => !$is_default_tls || $no_ec,
85 "11-dtls_resumption.cnf" => !$is_default_dtls || !disabled("sctp"),
86 "16-dtls-certstatus.cnf" => !$is_default_dtls || !disabled("sctp"),
87 "17-renegotiate.cnf" => disabled("tls1_2"),
88 "18-dtls-renegotiate.cnf" => disabled("dtls1_2") || !disabled("sctp"),
89 "19-mac-then-encrypt.cnf" => !$is_default_tls,
90 "20-cert-select.cnf" => !$is_default_tls || $no_dh || $no_dsa,
91 "22-compression.cnf" => !$is_default_tls,
92 "25-cipher.cnf" => disabled("poly1305") || disabled("chacha"),
93 "27-ticket-appdata.cnf" => !$is_default_tls,
94 "28-seclevel.cnf" => disabled("tls1_2") || $no_ec,
95 "30-extended-master-secret.cnf" => disabled("tls1_2"),
96 "32-compressed-certificate.cnf" => disabled("comp") || disabled("tls1_3"),
99 # Add your test here if it should be skipped for some compile-time
100 # configurations. Default is $no_tls but some tests have different skip
103 "06-sni-ticket.cnf" => $no_tls_below1_3,
104 "07-dtls-protocol-version.cnf" => $no_dtls,
105 "08-npn.cnf" => (disabled("tls1") && disabled("tls1_1")
106 && disabled("tls1_2")) || $no_npn,
107 "10-resumption.cnf" => disabled("tls1_1") || disabled("tls1_2"),
108 "11-dtls_resumption.cnf" => disabled("dtls1") || disabled("dtls1_2"),
109 "12-ct.cnf" => $no_tls || $no_ct || $no_ec,
110 # We could run some of these tests without TLS 1.2 if we had a per-test
111 # disable instruction but that's a bizarre configuration not worth
112 # special-casing for.
113 # TODO(TLS 1.3): We should review this once we have TLS 1.3.
114 "13-fragmentation.cnf" => disabled("tls1_2"),
115 "14-curves.cnf" => disabled("tls1_2") || disabled("tls1_3")
116 || $no_ec || $no_ec2m,
117 "15-certstatus.cnf" => $no_tls || $no_ocsp,
118 "16-dtls-certstatus.cnf" => $no_dtls || $no_ocsp,
119 "17-renegotiate.cnf" => $no_tls_below1_3,
120 "18-dtls-renegotiate.cnf" => $no_dtls,
121 "19-mac-then-encrypt.cnf" => $no_pre_tls1_3,
122 "20-cert-select.cnf" => disabled("tls1_2") || $no_ec,
123 "21-key-update.cnf" => disabled("tls1_3") || ($no_ec && $no_dh),
124 "22-compression.cnf" => disabled("zlib") || $no_tls,
125 "23-srp.cnf" => (disabled("tls1") && disabled ("tls1_1")
126 && disabled("tls1_2")) || disabled("srp"),
127 "24-padding.cnf" => disabled("tls1_3") || ($no_ec && $no_dh),
128 "25-cipher.cnf" => disabled("ec") || disabled("tls1_2"),
129 "26-tls13_client_auth.cnf" => disabled("tls1_3") || ($no_ec && $no_dh),
130 "29-dtls-sctp-label-bug.cnf" => disabled("sctp") || disabled("sock"),
131 # TODO(QUIC): Temporarily disabled during finalization of front-end API.
132 "31-quic.cnf" => 1 || $no_quic || $no_ec,
133 "32-compressed-certificate.cnf" => disabled("comp") || disabled("tls1_3"),
136 foreach my $conf (@conf_files) {
137 subtest "Test configuration $conf" => sub {
138 plan tests => 6 + ($no_fips ? 0 : 3);
140 $conf_dependent_tests{$conf} || $^O eq "VMS" ? 0 : 1,
141 defined($skip{$conf}) ? $skip{$conf} : $no_tls,
145 defined($skip{$conf}) ? $skip{$conf} : $no_tls,
149 defined($skip{$conf}) ? $skip{$conf} : $no_tls,
150 "fips") unless $no_fips;
155 my ($conf, $check_source, $skip, $provider) = @_;
157 my $conf_file = srctop_file("test", "ssl-tests", $conf);
158 my $input_file = $conf_file . ".in";
159 my $output_file = $conf . "." . $provider;
163 # "Test" 1. Generate the source.
164 skip 'failure', 2 unless
165 ok(run(perltest(["generate_ssl_tests.pl", $input_file, $provider],
166 interpreter_args => [ "-I", srctop_dir("util", "perl")],
167 stdout => $output_file)),
168 "Getting output from generate_ssl_tests.pl.");
171 # Test 2. Compare against existing output in test/ssl-tests/
172 skip "Skipping generated source test for $conf", 1
175 $run_test = is(cmp_text($output_file, $conf_file), 0,
176 "Comparing generated $output_file with $conf_file.");
179 # Test 3. Run the test.
180 skip "No tests available; skipping tests", 1 if $skip;
181 skip "Stale sources; skipping tests", 1 if !$run_test;
183 my $msg = "running CTLOG_FILE=test/ct/log_list.cnf". # $ENV{CTLOG_FILE}.
184 " TEST_CERTS_DIR=test/certs". # $ENV{TEST_CERTS_DIR}.
185 " test/ssl_test test/ssl-tests/$conf $provider";
186 if ($provider eq "fips") {
187 ok(run(test(["ssl_test", $output_file, $provider,
188 srctop_file("test", "fips-and-base.cnf")])), $msg);
190 ok(run(test(["ssl_test", $output_file, $provider])), $msg);
196 return compare_text(@_, sub {
199 return $_[0] ne $_[1];