Update copyright year

[openssl.git] / doc / man1 / openssl-cmp.pod.in

=pod
{- OpenSSL::safe::output_do_not_edit_headers(); -}

=head1 NAME

openssl-cmp - client for the Certificate Management Protocol (CMP, RFC 4210)

=head1 SYNOPSIS

B<openssl> B<cmp>
[B<-help>]
[B<-config> I<filename>]
[B<-section> I<names>]

[B<-server> I<address[:port]>]
[B<-proxy> I<[http[s]://]address[:port][/path]>]
[B<-no_proxy> I<addresses>]
[B<-path> I<remote_path>]
[B<-msg_timeout> I<seconds>]
[B<-total_timeout> I<seconds>]

[B<-trusted> I<filenames>]
[B<-untrusted> I<sources>]
[B<-srvcert> I<filename>]
[B<-recipient> I<name>]
[B<-expect_sender> I<name>]
[B<-ignore_keyusage>]
[B<-unprotected_errors>]
[B<-extracertsout> I<filename>]
[B<-cacertsout> I<filename>]

[B<-ref> I<value>]
[B<-secret> I<arg>]
[B<-cert> I<filename>]
[B<-key> I<filename>]
[B<-keypass> I<arg>]
[B<-digest> I<name>]
[B<-mac> I<name>]
[B<-extracerts> I<sources>]
[B<-unprotected_requests>]

[B<-cmd> I<ir|cr|kur|p10cr|rr|genm>]
[B<-infotype> I<name>]
[B<-geninfo> I<OID:int:N>]

[B<-newkey> I<filename>]
[B<-newkeypass> I<arg>]
[B<-subject> I<name>]
[B<-issuer> I<name>]
[B<-days> I<number>]
[B<-reqexts> I<name>]
[B<-sans> I<spec>]
[B<-san_nodefault>]
[B<-policies> I<name>]
[B<-policy_oids> I<names>]
[B<-policy_oids_critical>]
[B<-popo> I<number>]
[B<-csr> I<filename>]
[B<-out_trusted> I<filenames>]
[B<-verify_hostname> I<cn>]
[B<-verify_ip> I<ip>]
[B<-verify_email> I<email>]
[B<-implicit_confirm>]
[B<-disable_confirm>]
[B<-certout> I<filename>]

[B<-oldcert> I<filename>]
[B<-revreason> I<number>]

[B<-certform> I<PEM|DER>]
[B<-keyform> I<PEM|DER|P12|ENGINE>]
[B<-certsform> I<PEM|DER|P12>]
[B<-otherpass> I<arg>]
[B<-engine> I<id>]
{- $OpenSSL::safe::opt_provider_synopsis -}

[B<-tls_used>]
[B<-tls_cert> I<filename>]
[B<-tls_key> I<filename>]
[B<-tls_keypass> I<arg>]
[B<-tls_extra> I<filenames>]
[B<-tls_trusted> I<filenames>]
[B<-tls_host> I<name>]

[B<-batch>]
[B<-repeat> I<number>]
[B<-reqin>] I<filenames>
[B<-reqin_new_tid>]
[B<-reqout>] I<filenames>
[B<-rspin>] I<filenames>
[B<-rspout>] I<filenames>
[B<-use_mock_srv>]

[B<-policy> I<arg>]
[B<-purpose> I<purpose>]
[B<-verify_name> I<name>]
[B<-verify_depth> I<num>]
[B<-auth_level> I<level>]
[B<-attime> I<timestamp>]
[B<-ignore_critical>]
[B<-issuer_checks>]
[B<-policy_check>]
[B<-explicit_policy>]
[B<-inhibit_any>]
[B<-inhibit_map>]
[B<-x509_strict>]
[B<-extended_crl>]
[B<-use_deltas>]
[B<-policy_print>]
[B<-check_ss_sig>]
[B<-crl_check>]
[B<-crl_check_all>]
[B<-trusted_first>]
[B<-suiteB_128_only>]
[B<-suiteB_128>]
[B<-suiteB_192>]
[B<-partial_chain>]
[B<-no_alt_chains>]
[B<-no_check_time>]
[B<-allow_proxy_certs>]

[B<-port> I<number>]
[B<-max_msgs> I<number>]
[B<-srv_ref> I<value>]
[B<-srv_secret> I<arg>]
[B<-srv_cert> I<filename>]
[B<-srv_key> I<filename>]
[B<-srv_keypass> I<arg>]
[B<-srv_trusted> I<filenames>]
[B<-srv_untrusted> I<filenames>]
[B<-rsp_cert> I<filename>]
[B<-rsp_extracerts> I<filenames>]
[B<-rsp_capubs> I<filenames>]
[B<-poll_count> I<number>]
[B<-check_after> I<number>]
[B<-grant_implicitconf>]
[B<-pkistatus> I<number>]
[B<-failure> I<number>]
[B<-failurebits> I<number>]
[B<-statusstring> I<arg>]
[B<-send_error>]
[B<-send_unprotected>]
[B<-send_unprot_err>]
[B<-accept_unprotected>]
[B<-accept_unprot_err>]
[B<-accept_raverified>]

=head1 DESCRIPTION

The B<cmp> command is a client implementation for the Certificate
Management Protocol (CMP) as defined in RFC4210.
It can be used to request certificates from a CA server,
update their certificates,
request certificates to be revoked, and perform other CMP requests.

=head1 OPTIONS

=over 4

=item B<-help>

Display a summary of all options

=item B<-config> I<filename>

Configuration file to use.
An empty string C<""> means none.
Default filename is from the environment variable C<OPENSSL_CONF>.

=item B<-section> I<names>

Section(s) to use within config file defining CMP options.
An empty string C<""> means no specific section.
Default is C<cmp>.
Multiple section names may be given, separated by commas and/or whitespace
(where in the latter case the whole argument must be enclosed in "...").
Contents of sections named later may override contents of sections named before.
In any case, as usual, the C<[default]> section and finally the unnamed
section (as far as present) can provide per-option fallback values.

=back


=head2 Generic message options

=over 4

=item B<-cmd> I<ir|cr|kur|p10cr|rr|genm>

CMP command to execute.
Currently implemented commands are:

=over 8

=item  ir E<nbsp>  - Initialization Request

=item  cr E<nbsp>  - Certificate Request

=item  p10cr - PKCS#10 Certification Request (for legacy support)

=item  kur E<nbsp>E<nbsp>- Key Update Request

=item  rr E<nbsp>  - Revocation Request

=item  genm  - General Message

=back

B<ir> requests initialization of an End Entity into a PKI hierarchy by means of
issuance of a first certificate.

B<cr> requests issuance of an additional certificate for an End Entity already
initialized to the PKI hierarchy.

B<p10cr> requests issuance of an additional certificate similarly to B<cr>
but uses PKCS#10 CSR format.

B<kur> requests (key) update for an existing, given certificate.

B<rr> requests revocation of an existing, given certificate.

B<genm> requests information using a General Message, where optionally
included B<InfoTypeAndValue>s may be used to state which info is of interest.
Upon receipt of the General Response, information about all received
ITAV B<infoType>s is printed to stdout.

=item B<-infotype> I<name>

Set InfoType name to use for requesting specific info in B<genm>,
e.g., C<signKeyPairTypes>.

=item B<-geninfo> I<OID:int:N>

generalInfo integer values to place in request PKIHeader with given OID,
e.g., C<1.2.3:int:987>.

=back


=head2 Certificate request options

=over 4

=item B<-newkey> I<filename>

The file containing the private or public key for the certificate requested
in Initialization Request (IR), Certification Request(CR), or
Key Update Request (KUR).
Default is the public key in the PKCS#10 CSR given with the B<-csr> option,
if any, or else the current client key, if given.

=item B<-newkeypass> I<arg>

Pass phrase source for the key given with the B<-newkey> option.
If not given here, the password will be prompted for if needed.

For more information about the format of B<arg> see the
B<PASS PHRASE ARGUMENTS> section in L<openssl(1)>.

=item B<-subject> I<name>

X509 Distinguished Name (DN) of subject to use in the requested certificate
template.
For KUR, it defaults to the subject DN of the reference certificate
(see B<-oldcert>).
This default is used for IR and CR only if no SANs are set.

The argument must be formatted as I</type0=value0/type1=value1/type2=...>,
characters may be escaped by C<\>E<nbsp>(backslash), no spaces are skipped.

In case B<-cert> is not set, for instance when using MSG_MAC_ALG,
the subject DN is also used as sender of the PKI message.

=item B<-issuer> I<name>

X509 issuer Distinguished Name (DN) of the CA server
to place in the requested certificate template in IR/CR/KUR.

The argument must be formatted as I</type0=value0/type1=value1/type2=...>,
characters may be escaped by C<\>E<nbsp>(backslash), no spaces are skipped.

If neither B<-srvcert> nor B<-recipient> is available,
the name given in this option is also set as the recipient of the CMP message.

=item B<-days> I<number>

Number of days the new certificate is requested to be valid for, counting from
the current time of the host.
Also triggers the explicit request that the
validity period starts from the current time (as seen by the host).

=item B<-reqexts> I<name>

Name of section in OpenSSL config file defining certificate request extensions.

=item B<-sans> I<spec>

One or more IP addresses, DNS names, or URIs separated by commas or whitespace
(where in the latter case the whole argument must be enclosed in "...")
to add as Subject Alternative Name(s) (SAN) certificate request extension.
If the special element "critical" is given the SANs are flagged as critical.
Cannot be used if any Subject Alternative Name extension is set via B<-reqexts>.

=item B<-san_nodefault>

When Subject Alternative Names are not given via B<-sans>
nor defined via B<-reqexts>,
they are copied by default from the reference certificate (see B<-oldcert>).
This can be disabled by giving the B<-san_nodefault> option.

=item B<-policies> I<name>

Name of section in OpenSSL config file defining policies to be set
as certificate request extension.
This option cannot be used together with B<-policy_oids>.

=item B<-policy_oids> I<names>

One or more OID(s), separated by commas and/or whitespace
(where in the latter case the whole argument must be enclosed in "...")
to add as certificate policies request extension.
This option cannot be used together with B<-policies>.

=item B<-policy_oids_critical>

Flag the policies given with B<-policy_oids> as critical.

=item B<-popo> I<number>

Proof-of-Possession (POPO) method to use for IR/CR/KUR; values: C<-1>..<2> where
C<-1> = NONE, C<0> = RAVERIFIED, C<1> = SIGNATURE (default), C<2> = KEYENC.

Note that a signature-based POPO can only be produced if a private key
is provided via the B<-newkey> or B<-key> options.

=item B<-csr> I<filename>

CSR in PKCS#10 format to use in legacy P10CR messages.

=item B<-out_trusted> I<filenames>

Trusted certificate(s) to use for verifying the newly enrolled certificate.

Multiple filenames may be given, separated by commas and/or whitespace
(where in the latter case the whole argument must be enclosed in "...").
Each source may contain multiple certificates.

=item B<-verify_hostname> I<name>

When verification of the newly enrolled certificate is enabled (with the
B<-out_trusted> option), check if any DNS Subject Alternative Name (or if no
DNS SAN is included, the Common Name in the subject) equals the given B<name>.

=item B<-verify_ip> I<ip>

When verification of the newly enrolled certificate is enabled (with the
B<-out_trusted> option), check if there is
an IP address Subject Alternative Name matching the given IP address.

=item B<-verify_email> I<email>

When verification of the newly enrolled certificate is enabled (with the
B<-out_trusted> option), check if there is
an email address Subject Alternative Name matching the given email address.

=item B<-implicit_confirm>

Request implicit confirmation of newly enrolled certificates.

=item B<-disable_confirm>

Do not send certificate confirmation message for newly enrolled certificate
without requesting implicit confirmation
to cope with broken servers not supporting implicit confirmation correctly.
B<WARNING:> This leads to behavior violating RFC 4210.

=item B<-certout> I<filename>

The file where the newly enrolled certificate should be saved.

=back


=head2 Certificate revocation options

=over 4

=item B<-oldcert> I<filename>

The certificate to be updated (i.e., renewed or re-keyed) in Key Update Request
(KUR) messages or to be revoked in Revocation Request (RR) messages.
It must be given for RR, while for KUR it defaults to B<-cert>.

The reference certificate determined in this way, if any, is also used for
deriving default subject DN and Subject Alternative Names for IR, CR, and KUR.
Its issuer, if any, is used as default recipient in the CMP message header
if neither B<-srvcert>, B<-recipient>, nor B<-issuer> is available.

=item B<-revreason> I<number>

Set CRLReason to be included in revocation request (RR); values: C<0>..C<10>
or C<-1> for none (which is the default).

Reason numbers defined in RFC 5280 are:

   CRLReason ::= ENUMERATED {
        unspecified             (0),
        keyCompromise           (1),
        cACompromise            (2),
        affiliationChanged      (3),
        superseded              (4),
        cessationOfOperation    (5),
        certificateHold         (6),
        -- value 7 is not used
        removeFromCRL           (8),
        privilegeWithdrawn      (9),
        aACompromise           (10)
    }

=back


=head2 Message transfer options

=over 4

=item B<-server> I<[http[s]://]address[:port]>

The IP address or DNS hostname and optionally port (defaulting to 80 or 443)
of the CMP server to connect to using HTTP(S) transport.
The optional "http://" or "https://" prefix is ignored.

=item B<-proxy> I<[http[s]://]address[:port][/path]>

The HTTP(S) proxy server to use for reaching the CMP server unless B<no_proxy>
applies, see below.
The optional "http://" or "https://" prefix and any trailing path are ignored.
Defaults to the environment variable C<http_proxy> if set, else C<HTTP_PROXY>
in case no TLS is used, otherwise C<https_proxy> if set, else C<HTTPS_PROXY>.

=item B<-no_proxy> I<addresses>
List of IP addresses and/or DNS names of servers
not to use an HTTP(S) proxy for, separated by commas and/or whitespace
(where in the latter case the whole argument must be enclosed in "...").
Default is from the environment variable C<no_proxy> if set, else C<NO_PROXY>.

=item B<-path> I<remote_path>

HTTP path at the CMP server (aka CMP alias) to use for POST requests.
Defaults to "/".

=item B<-msg_timeout> I<seconds>

Number of seconds (or 0 for infinite) a CMP request-response message round trip
is allowed to take before a timeout error is returned.
Default is 120.

=item B<-total_timeout> I<seconds>

Maximum number seconds an overall enrollment transaction may take,
including attempts polling for certificates on C<waiting> PKIStatus.
Default is 0 (infinite).

=back


=head2 Server authentication options

=over 4

=item B<-trusted> I<filenames>

When verifying signature-based protection of CMP response messages,
these are the CA certificate(s) to trust while checking certificate chains
during CMP server authentication.
This option gives more flexibility than the B<-srvcert> option because
it does not pin down the expected CMP server by allowing only one certificate.

Multiple filenames may be given, separated by commas and/or whitespace
(where in the latter case the whole argument must be enclosed in "...").
Each source may contain multiple certificates.

=item B<-untrusted> I<sources>

Non-trusted intermediate certificate(s) that may be useful
for constructing the TLS client certificate chain (if TLS is enabled) and
for building certificate chains while verifying the CMP server certificate
(when checking signature-based CMP message protection)
and while verifying the newly enrolled certificate.
These may get added to the extraCerts field sent in requests as far as needed.

Multiple filenames may be given, separated by commas and/or whitespace.
Each file may contain multiple certificates.

=item B<-srvcert> I<filename>

The specific CMP server certificate to use and directly trust (even if it is
expired) when verifying signature-based protection of CMP response messages.
May be set alternatively to the B<-trusted> option
if the certificate is available and only this one shall be accepted.

If set, the issuer of the certificate is also used as the recipient of the CMP
request and as the expected sender of the CMP response,
overriding any potential B<-recipient> option.

=item B<-recipient> I<name>

This option may be used to explicitly set the Distinguished Name (DN)
of the CMP message recipient, i.e., the CMP server (usually a CA or RA entity).

The argument must be formatted as I</type0=value0/type1=value1/type2=...>,
characters may be escaped by C<\>E<nbsp>(backslash), no spaces are skipped.

If a CMP server certificate is given with the B<-srvcert> option, its subject
name is taken as the recipient name and the B<-recipient> option is ignored.
If neither of the two are given, the recipient of the PKI message is
determined in the following order: from the B<-issuer> option if present,
the issuer of old cert given with the B<-oldcert> option if present,
the issuer of the client certificate (B<-cert> option) if present.

The recipient field in the header of CMP messagese is mandatory.
If none of the options that enable the derivation of the recipient name are
given, no suitable value for the recipient in the PKIHeader is available.
As a last resort it is set to NULL-DN.

When a response is received, its sender must match the recipient of the request.

=item B<-expect_sender> I<name>

Distinguished Name (DN) of the expected sender of CMP response messages when
MSG_SIG_ALG is used for protection.
This can be used to ensure that only a particular entity is accepted
as the CMP server, and attackers are not able to use arbitrary certificates
of a trusted PKI hierarchy to fraudulently pose as a CMP server.
Note that this option gives slightly more freedom than B<-srvcert>,
which pins down the server to a particular certificate,
while B<-expect_sender> I<name> will continue to match after updates of the
server cert.

The argument must be formatted as I</type0=value0/type1=value1/type2=...>,
characters may be escaped by C<\>E<nbsp>(backslash), no spaces are skipped.

If not given, the subject DN of B<-srvcert>, if provided, will be used.

=item B<-ignore_keyusage>

Ignore key usage restrictions in CMP signer certificates when verifying
signature-based protection of incoming CMP messages,
else C<digitalSignature> must be allowed for signer certificate.

=item B<-unprotected_errors>

Accept missing or invalid protection of negative responses from the server.
This applies to the following message types and contents:

=over 4

=item * error messages

=item * negative certificate responses (IP/CP/KUP)

=item * negative revocation responses (RP)

=item * negative PKIConf messages

=back

B<WARNING:> This setting leads to unspecified behavior and it is meant
exclusively to allow interoperability with server implementations violating
RFC 4210, e.g.:

=over 4

=item * section 5.1.3.1 allows exceptions from protecting only for special
cases:
"There MAY be cases in which the PKIProtection BIT STRING is deliberately not
used to protect a message [...] because other protection, external to PKIX, will
be applied instead."

=item * section 5.3.21 is clear on ErrMsgContent: "The CA MUST always sign it
with a signature key."

=item * appendix D.4 shows PKIConf message having protection

=back

=item B<-extracertsout> I<filename>

The file where to save any extra certificates received in the extraCerts field
of response messages.

=item B<-cacertsout> I<filename>

The file where to save any CA certificates received in the caPubs field of
Initializiation Response (IP) messages.

=back


=head2 Client authentication options

=over 4

=item B<-ref> I<value>

Reference number/string/value to use as fallback senderKID; this is required
if no sender name can be determined from the B<-cert> or <-subject> options and
is typically used when authenticating with pre-shared key (password-based MAC).

=item B<-secret> I<arg>

Source of secret value to use for creating PBM-based protection of outgoing
messages and for verifying any PBM-based protection of incoming messages.
PBM stands for Password-Based Message Authentication Code.
This takes precedence over the B<-cert> option.

For more information about the format of B<arg> see the
B<PASS PHRASE ARGUMENTS> section in L<openssl(1)>.

=item B<-cert> I<filename>

The client's current certificate.
Requires the corresponding key to be given with B<-key>.
The subject of this certificate will be used as the "sender" field
of outgoing CMP messages, while B<-subjectName> may provide a fallback value.
When using signature-based message protection, this "protection certificate"
will be included first in the extraCerts field of outgoing messages.
In Initialization Request (IR) messages this can be used for authenticating
using an external entity certificate as defined in appendix E.7 of RFC 4210.
For Key Update Request (KUR) messages this is also used as
the certificate to be updated if the B<-oldcert> option is not given.
If the file includes further certs, they are appended to the untrusted certs.
These may get added to the extraCerts field sent in requests as far as needed.

=item B<-key> I<filename>

The corresponding private key file for the client's current certificate given in
the B<-cert> option.
This will be used for signature-based message protection unless
the B<-secret> option indicating PBM or B<-unprotected_requests> is given.

=item B<-keypass> I<arg>

Pass phrase source for the private key given with the B<-key> option.
Also used for B<-cert> and B<-oldcert> in case it is an encrypted PKCS#12 file.
If not given here, the password will be prompted for if needed.

For more information about the format of B<arg> see the
B<PASS PHRASE ARGUMENTS> section in L<openssl(1)>.

=item B<-digest> I<name>

Specifies name of supported digest to use in RFC 4210's MSG_SIG_ALG
and as the one-way function (OWF) in MSG_MAC_ALG.
If applicable, this is used for message protection and
Proof-of-Possession (POPO) signatures.
To see the list of supported digests, use B<openssl list -digest-commands>.
Defaults to C<sha256>.

=item B<-mac> I<name>

Specifies the name of the MAC algorithm in MSG_MAC_ALG.
To get the names of supported MAC algorithms use B<openssl list -mac-algorithms>
and possibly combine such a name with the name of a supported digest algorithm,
e.g., hmacWithSHA256.
Defaults to C<hmac-sha1> as per RFC 4210.

=item B<-extracerts> I<sources>

Certificates to append in the extraCerts field when sending messages.

Multiple filenames or URLs may be given, separated by commas and/or whitespace
(where in the latter case the whole argument must be enclosed in "...").
Each source may contain multiple certificates.

=item B<-unprotected_requests>

Send messages without CMP-level protection.

=back


=head2 Credentials format options

=over 4

=item B<-certform> I<PEM|DER>

File format to use when saving a certificate to a file.
Default value is PEM.

=item B<-keyform> I<PEM|DER|P12>

Format to assume when reading key files.
Default value is PEM.

=item B<-certsform> I<PEM|DER|P12>

Format to try first when reading multiple certificates from file(s).
Default value is PEM.

=item B<-otherpass> I<arg>

Pass phrase source for certificate given with the B<-trusted>, B<-untrusted>,
B<-out_trusted>, B<-extracerts>, B<-tls_extra>, or B<-tls_trusted> options.
If not given here, the password will be prompted for if needed.

For more information about the format of B<arg> see the
B<PASS PHRASE ARGUMENTS> section in L<openssl(1)>.

=item B<-engine> I<id>

Specifying a crypto engine B<id> will lead to obtaining a functional
reference to the specified engine, initializing it if needed.
The engine will be used for all algorithms supported for keys
prefixed by C<engine:>.
Engines may be defined in the OpenSSL config file as usual in an engine section.

Options specifying keys, like B<-key>, B<-newkey>, B<-tls_key> can prefix
C<engine:> to engine-specific identifiers for security tokens objects held by
the engine.
 The following example utilizes the RFC 7512 PKCS #11 URI scheme
as supported, e.g., by libp11:
C<-key engine:pkcs11:object=my-private-key;type=private;pin-value=1234>

{- $OpenSSL::safe::opt_provider_item -}

=back


=head2 TLS options

=over 4

=item B<-tls_used>

Enable using TLS (even when other TLS_related options are not set)
when connecting to CMP server.

=item B<-tls_cert> I<filename>

Client's TLS certificate.
If the file includes further certificates,
they are used for constructing the client cert chain provided to the TLS server.

=item B<-tls_key> I<filename>

Private key for the client's TLS certificate.

=item B<-tls_keypass> I<arg>

Pass phrase source for client's private TLS key B<tls_key>.
Also used for B<-tls_cert> in case it is an encrypted PKCS#12 file.
If not given here, the password will be prompted for if needed.

For more information about the format of B<arg> see the
B<PASS PHRASE ARGUMENTS> section in L<openssl(1)>.

=item B<-tls_extra> I<filenames>

Extra certificates to provide to TLS server during TLS handshake

=item B<-tls_trusted> I<filenames>

Trusted certificate(s) to use for verifying the TLS server certificate.
This implies hostname validation.

Multiple filenames may be given, separated by commas and/or whitespace
(where in the latter case the whole argument must be enclosed in "...").
Each source may contain multiple certificates.

=item B<-tls_host> I<name>

Address to be checked during hostname validation. 
This may be a DNS name or an IP address.
If not given it defaults to the B<-server> address.

=back


=head2 Client-side debugging options

=over 4

=item B<-batch>

Do not interactively prompt for input, for instance when a password is needed.
This can be useful for batch processing and testing.

=item B<-repeat> I<number>

Invoke the command the given number of times with the same parameters.
Default is one invocation.

=item B<-reqin> I<filenames>

Take sequence of CMP requests from file(s).
Multiple filenames may be given, separated by commas and/or whitespace
(where in the latter case the whole argument must be enclosed in "...").
As many files are read as needed for a complete transaction.

=item B<-reqin_new_tid>

Use a fresh transactionID for CMP request messages read using B<-reqin>,
which requires re-protecting them as far as they were protected before.
This may be needed in case the sequence of requests is reused
and the CMP server complains that the transaction ID has already been used.

=item B<-reqout> I<filenames>

Save sequence of CMP requests to file(s).
Multiple filenames may be given, separated by commas and/or whitespace.
As many files are written as needed to store the complete transaction.

=item B<-rspin> I<filenames>

Process sequence of CMP responses provided in file(s), skipping server.
Multiple filenames may be given, separated by commas and/or whitespace.
As many files are read as needed for the complete transaction.

=item B<-rspout> I<filenames>

Save sequence of CMP responses to file(s).
Multiple filenames may be given, separated by commas and/or whitespace.
As many files are written as needed to store the complete transaction.

=item B<-use_mock_srv>

Use the internal mock server for testing the client.
This works at API level, bypassing HTTP transport.

=back


=head2 Certificate verification options, for both CMP and TLS

=over 4

=item B<-policy>, B<-purpose>, B<-verify_name>, B<-verify_depth>,
B<-attime>,
B<-ignore_critical>, B<-issuer_checks>,
B<-policy_check>,
B<-explicit_policy>, B<-inhibit_any>, B<-inhibit_map>,
B<-x509_strict>, B<-extended_crl>, B<-use_deltas>,
B<-policy_print>, B<-check_ss_sig>, B<-crl_check>, B<-crl_check_all>,
B<-trusted_first>,
B<-suiteB_128_only>, B<-suiteB_128>, B<-suiteB_192>,
B<-partial_chain>, B<-no_alt_chains>, B<-no_check_time>,
B<-auth_level>,
B<-allow_proxy_certs>

Set various options of certificate chain verification.
See L<openssl(1)/Verification Options> for details.

=back


=head2 Mock server options, for testing purposes only

=over 4

=item B<-port> I<number>

Act as CMP HTTP server mock-up listening on the given port.

=item B<-max_msgs> I<number>

Maximum number of CMP (request) messages the CMP HTTP server mock-up
should handle, which must be non-negative.
The default value is 0, which means that no limit is imposed.
In any case the server terminates on internal errors, but not when it
detects a CMP-level error that it can successfully answer with an error message.

=item B<-srv_ref> I<value>

Reference value to use as senderKID of server in case no B<-srv_cert> is given.

=item B<-srv_secret> I<arg>

Password source for server authentication with a pre-shared key (secret).

=item B<-srv_cert> I<filename>

Certificate of the server.

=item B<-srv_key> I<filename>

Private key used by the server for signing messages.

=item B<-srv_keypass> I<arg>

Server private key (and cert) file pass phrase source.

=item B<-srv_trusted> I<filenames>

Trusted certificates for client authentication.

=item B<-srv_untrusted> I<filenames>

Intermediate CA certs that may be useful when verifying client certificates.

=item B<-rsp_cert> I<filename>

Certificate to be returned as mock enrollment result.

=item B<-rsp_extracerts> I<filenames>

Extra certificates to be included in mock certification responses.

=item B<-rsp_capubs> I<filenames>

CA certificates to be included in mock Initialization Response (IP) message.

=item B<-poll_count> I<number>

Number of times the client must poll before receiving a certificate.

=item B<-check_after> I<number>

The checkAfter value (number of seconds to wait) to include in poll response.


=item B<-grant_implicitconf>

Grant implicit confirmation of newly enrolled certificate.

=item B<-pkistatus> I<number>

PKIStatus to be included in server response.
Valid range is 0 (accepted) .. 6 (keyUpdateWarning).

=item B<-failure> I<number>

A single failure info bit number to be included in server response.
Valid range is 0 (badAlg) .. 26 (duplicateCertReq).

=item B<-failurebits> I<number>
Number representing failure bits to be included in server response.
Valid range is 0 .. 2^27 - 1.

=item B<-statusstring> I<arg>

Text to be included as status string in server response.

=item B<-send_error>

Force server to reply with error message.

=item B<-send_unprotected>

Send response messages without CMP-level protection.

=item B<-send_unprot_err>

In case of negative responses, server shall send unprotected error messages,
certificate responses (IP/CP/KUP), and revocation responses (RP).
WARNING: This setting leads to behavior violating RFC 4210.

=item B<-accept_unprotected>

Accept missing or invalid protection of requests.

=item B<-accept_unprot_err>

Accept unprotected error messages from client.

=item B<-accept_raverified>

Accept RAVERIFED as proof-of-possession (POPO).

=back


=head1 NOTES

When setting up CMP configurations and experimenting with enrollment options
typically various errors occur until the configuration is correct and complete.
When the CMP server reports an error the client will by default
check the protection of the CMP response message.
Yet some CMP services tend not to protect negative responses.
In this case the client will reject them, and thus their contents are not shown
although they usually contain hints that would be helpful for diagnostics.
For assisting in such cases the CMP client offers a workaround via the
B<-unprotected_errors> option, which allows accepting such negative messages.


=head1 EXAMPLES

=head2 Simple examples using the default OpenSSL configuration file

This CMP client implementation comes with demonstrative CMP sections
in the example configuration file F<openssl/apps/openssl.cnf>,
which can be used to interact conveniently with the Insta Demo CA.

In order to enroll an initial certificate from that CA it is sufficient
to issue the following shell commands.

  cd /path/to/openssl
  export OPENSSL_CONF=openssl.cnf
  wget 'http://pki.certificate.fi:8080/install-ca-cert.html/ca-certificate.crt\
        ?ca-id=632&download-certificate=1' -O insta.ca.crt
  openssl genrsa -out insta.priv.pem
  openssl cmp -section insta

This should produce the file F<insta.cert.pem> containing a new certificate
for the private key held in F<insta.priv.pem>.
It can be viewed using, e.g.,

  openssl x509 -noout -text -in insta.cert.pem

In case the network setup requires using an HTTP proxy it may be given as usual
via the environment variable B<http_proxy> or via the B<proxy> option or
the CMP command-line argument B<-proxy>, for example

  -proxy http://192.168.1.1:8080

In the Insta Demo CA scenario both clients and the server may use the pre-shared
secret "insta" and the reference value "3078" to authenticate to each other.

Alternatively, CMP messages may be protected in signature-based manner,
where the trust anchor in this case is F<insta.ca.crt>
and the client may use any certificate already obtained from that CA,
as specified in the B<[signature]> section of the example configuration.
This can be used in combination with the B<[insta]> section simply by

  openssl cmp -section insta,signature

By default the CMP IR message type is used, yet CR works equally here.
This may be specified directly at the command line:

  openssl cmp -section insta -cmd cr

or by referencing in addition the B<[cr]> section of the example configuration:

  openssl cmp -section insta,cr

In order to update the enrolled certificate one may call

  openssl cmp -section insta,kur

using with PBM-based protection or

  openssl cmp -section insta,kur,signature

using signature-based protection.

In a similar way any previously enrolled certificate may be revoked by

  openssl cmp -section insta,rr -trusted insta.ca.crt

or

  openssl cmp -section insta,rr,signature

Many more options can be used in the configuration file
and/or on the command line.


=head2 Certificate enrollment

The following examples at first do not make use of a configuration file.
They assume that a CMP server can be contacted on the local TCP port 80
and accepts requests under the alias "/pkix/".

For enrolling its very first certificate the client generates a first client key
and sends an initial request message to the local CMP server
using a pre-shared secret key for mutual authentication.
In this example the client does not have the CA certificate yet,
so we specify the name of the CA with the B<-recipient> option
and save any CA certificates that we may receive in the C<capubs.pem> file.

In below command line usage examples the C<\> at line ends is just used
for formatting; each of the command invocations should be on a single line.

  openssl genrsa -out cl_key.pem
  openssl cmp -cmd ir -server 127.0.0.1:80 -path pkix/ \
    -ref 1234 -secret pass:1234-5678-1234-5678 \
    -recipient "/CN=CMPserver" \
    -newkey cl_key.pem -subject "/CN=MyName" \
    -cacertsout capubs.pem -certout cl_cert.pem


=head2 Certificate update

Then, when the client certificate and its related key pair needs to be updated,
the client can send a key update request taking the certs in C<capubs.pem>
as trusted for authenticating the server and using the previous cert and key
for its own authentication.
Then it can start using the new cert and key.

  openssl genrsa -out cl_key_new.pem
  openssl cmp -cmd kur -server 127.0.0.1:80 -path pkix/ \
    -trusted capubs.pem \
    -cert cl_cert.pem -key cl_key.pem \
    -newkey cl_key_new.pem -certout cl_cert.pem
  cp cl_key_new.pem cl_key.pem

This command sequence can be repated as often as needed.


=head2 Requesting information from CMP server

Requesting "all relevant information" with an empty General Message.
This prints information about all received ITAV B<infoType>s to stdout.

  openssl cmp -cmd genm -server 127.0.0.1 -path pkix/ \
    -ref 1234 -secret pass:1234-5678-1234-5678 \
    -recipient "/CN=CMPserver"


=head2 Using a custom configuration file

For CMP client invocations, in particular for certificate enrollment,
usually many parameters need to be set, which is tedious and error-prone to do
on the command line.
Therefore the client offers the possibility to read
options from sections of the OpenSSL config file, usually called B<openssl.cnf>.
The values found there can still be extended and even overridden by any
subsequently loaded sections and on the command line.

After including in the configuration file the following sections:

  [cmp]
  server = 127.0.0.1
  path = pkix/
  trusted = capubs.pem
  cert = cl_cert.pem
  key = cl_key.pem
  newkey = cl_key.pem
  certout = cl_cert.pem

  [cmp-init]
  recipient = "/CN=CMPserver"
  trusted =
  cert =
  key =
  ref = 1234
  secret = pass:1234-5678-1234-567
  subject = "/CN=MyName"
  cacertsout = capubs.pem

the above enrollment invocations reduce to

  openssl cmp -section cmp,cmp-init
  openssl cmp -cmd kur -newkey cl_key_new.pem

and the above genm call reduces to

  openssl cmp -section cmp,cmp-init -cmd genm

=head1 SEE ALSO

L<openssl-genrsa(1)>, L<openssl-ecparam(1)>, L<openssl-list(1)>,
L<openssl-req(1)>, L<openssl-x509(1)>, L<x509v3_config(5)>

=head1 COPYRIGHT

Copyright 2007-2020 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the OpenSSL license (the "License").  You may not use
this file except in compliance with the License.  You can obtain a copy
in the file LICENSE in the source distribution or at
L<https://www.openssl.org/source/license.html>.

=cut