5 Changes between 1.0.2g and 1.1.0 [xx XXX xxxx]
7 *) OpenSSL now uses a new threading API. It is no longer necessary to
8 set locking callbacks to use OpenSSL in a multi-threaded environment. There
9 are two supported threading models: pthreads and windows threads. It is
10 also possible to configure OpenSSL at compile time for "no-threads". The
11 old threading API should no longer be used. The functions have been
12 replaced with "no-op" compatibility macros.
13 [Alessandro Ghedini, Matt Caswell]
15 *) Modify behavior of ALPN to invoke callback after SNI/servername
16 callback, such that updates to the SSL_CTX affect ALPN.
19 *) Add SSL_CIPHER queries for authentication and key-exchange.
21 *) Modify behavior of ALPN to invoke callback after SNI/servername
22 callback, such that updates to the SSL_CTX affect ALPN.
25 *) Changes to the DEFAULT cipherlist:
26 - Prefer (EC)DHE handshakes over plain RSA.
27 - Prefer AEAD ciphers over legacy ciphers.
28 - Prefer ECDSA over RSA when both certificates are available.
29 - Prefer TLSv1.2 ciphers/PRF.
30 - Remove DSS, SEED, IDEA, CAMELLIA, and AES-CCM from the
34 *) Change the ECC default curve list to be this, in order: x25519,
35 secp256r1, secp521r1, secp384r1.
38 *) RC4 based libssl ciphersuites are now classed as "weak" ciphers and are
39 disabled by default. They can be re-enabled using the
40 enable-weak-ssl-ciphers option to Configure.
43 *) If the server has ALPN configured, but supports no protocols that the
44 client advertises, send a fatal "no_application_protocol" alert.
45 This behaviour is SHALL in RFC 7301, though it isn't universally
46 implemented by other servers.
49 *) Add X25519 support.
50 Integrate support for X25519 into EC library. This includes support
51 for public and private key encoding using the format documented in
52 draft-josefsson-pkix-newcurves-01: specifically X25519 uses the
53 OID from that draft, encodes public keys using little endian
54 format in the ECPoint structure and private keys using
55 little endian form in the privateKey field of the ECPrivateKey
56 structure. TLS support complies with draft-ietf-tls-rfc4492bis-06
59 Note: the current version supports key generation, public and
60 private key encoding and ECDH key agreement using the EC API.
61 Low level point operations such as EC_POINT_add(), EC_POINT_mul()
65 *) Deprecate SRP_VBASE_get_by_user.
66 SRP_VBASE_get_by_user had inconsistent memory management behaviour.
67 In order to fix an unavoidable memory leak (CVE-2016-0798),
68 SRP_VBASE_get_by_user was changed to ignore the "fake user" SRP
69 seed, even if the seed is configured.
71 Users should use SRP_VBASE_get1_by_user instead. Note that in
72 SRP_VBASE_get1_by_user, caller must free the returned value. Note
73 also that even though configuring the SRP seed attempts to hide
74 invalid usernames by continuing the handshake with fake
75 credentials, this behaviour is not constant time and no strong
76 guarantees are made that the handshake is indistinguishable from
80 *) Configuration change; it's now possible to build dynamic engines
81 without having to build shared libraries and vice versa. This
82 only applies to the engines in engines/, those in crypto/engine/
83 will always be built into libcrypto (i.e. "static").
85 Building dynamic engines is enabled by default; to disable, use
86 the configuration option "disable-dynamic-engine".
88 The only requirements for building dynamic engines are the
89 presence of the DSO module and building with position independent
90 code, so they will also automatically be disabled if configuring
91 with "disable-dso" or "disable-pic".
93 The macros OPENSSL_NO_STATIC_ENGINE and OPENSSL_NO_DYNAMIC_ENGINE
94 are also taken away from openssl/opensslconf.h, as they are
98 *) Configuration change; if there is a known flag to compile
99 position independent code, it will always be applied on the
100 libcrypto and libssl object files, and never on the application
101 object files. This means other libraries that use routines from
102 libcrypto / libssl can be made into shared libraries regardless
103 of how OpenSSL was configured.
105 If this isn't desirable, the configuration options "disable-pic"
106 or "no-pic" can be used to disable the use of PIC. This will
107 also disable building shared libraries and dynamic engines.
110 *) Removed JPAKE code. It was experimental and has no wide use.
113 *) The INSTALL_PREFIX Makefile variable has been renamed to
114 DESTDIR. That makes for less confusion on what this variable
115 is for. Also, the configuration option --install_prefix is
119 *) Heartbeat for TLS has been removed and is disabled by default
120 for DTLS; configure with enable-heartbeats. Code that uses the
121 old #define's might need to be updated.
122 [Emilia Käsper, Rich Salz]
124 *) Rename REF_CHECK to REF_DEBUG.
127 *) New "unified" build system
129 The "unified" build system is aimed to be a common system for all
130 platforms we support. With it comes new support for VMS.
132 This system builds supports building in a different directory tree
133 than the source tree. It produces one Makefile (for unix family
134 or lookalikes), or one descrip.mms (for VMS).
136 The source of information to make the Makefile / descrip.mms is
137 small files called 'build.info', holding the necessary
138 information for each directory with source to compile, and a
139 template in Configurations, like unix-Makefile.tmpl or
142 We rely heavily on the perl module Text::Template.
145 *) Added support for auto-initialisation and de-initialisation of the library.
146 OpenSSL no longer requires explicit init or deinit routines to be called,
147 except in certain circumstances. See the OPENSSL_init_crypto() and
148 OPENSSL_init_ssl() man pages for further information.
151 *) The arguments to the DTLSv1_listen function have changed. Specifically the
152 "peer" argument is now expected to be a BIO_ADDR object.
154 *) Rewrite of BIO networking library. The BIO library lacked consistent
155 support of IPv6, and adding it required some more extensive
156 modifications. This introduces the BIO_ADDR and BIO_ADDRINFO types,
157 which hold all types of addresses and chains of address information.
158 It also introduces a new API, with functions like BIO_socket,
159 BIO_connect, BIO_listen, BIO_lookup and a rewrite of BIO_accept.
160 The source/sink BIOs BIO_s_connect, BIO_s_accept and BIO_s_datagram
161 have been adapted accordingly.
164 *) RSA_padding_check_PKCS1_type_1 now accepts inputs with and without
168 *) CRIME protection: disable compression by default, even if OpenSSL is
169 compiled with zlib enabled. Applications can still enable compression
170 by calling SSL_CTX_clear_options(ctx, SSL_OP_NO_COMPRESSION), or by
171 using the SSL_CONF library to configure compression.
174 *) The signature of the session callback configured with
175 SSL_CTX_sess_set_get_cb was changed. The read-only input buffer
176 was explicitly marked as 'const unsigned char*' instead of
180 *) Always DPURIFY. Remove the use of uninitialized memory in the
181 RNG, and other conditional uses of DPURIFY. This makes -DPURIFY a no-op.
184 *) Removed many obsolete configuration items, including
185 DES_PTR, DES_RISC1, DES_RISC2, DES_INT
186 MD2_CHAR, MD2_INT, MD2_LONG
188 IDEA_SHORT, IDEA_LONG
189 RC2_SHORT, RC2_LONG, RC4_LONG, RC4_CHUNK, RC4_INDEX
190 [Rich Salz, with advice from Andy Polyakov]
192 *) Many BN internals have been moved to an internal header file.
193 [Rich Salz with help from Andy Polyakov]
195 *) Configuration and writing out the results from it has changed.
196 Files such as Makefile include/openssl/opensslconf.h and are now
197 produced through general templates, such as Makefile.in and
198 crypto/opensslconf.h.in and some help from the perl module
201 Also, the center of configuration information is no longer
202 Makefile. Instead, Configure produces a perl module in
203 configdata.pm which holds most of the config data (in the hash
204 table %config), the target data that comes from the target
205 configuration in one of the Configurations/*.conf files (in
209 *) To clarify their intended purposes, the Configure options
210 --prefix and --openssldir change their semantics, and become more
211 straightforward and less interdependent.
213 --prefix shall be used exclusively to give the location INSTALLTOP
214 where programs, scripts, libraries, include files and manuals are
215 going to be installed. The default is now /usr/local.
217 --openssldir shall be used exclusively to give the default
218 location OPENSSLDIR where certificates, private keys, CRLs are
219 managed. This is also where the default openssl.cnf gets
221 If the directory given with this option is a relative path, the
222 values of both the --prefix value and the --openssldir value will
223 be combined to become OPENSSLDIR.
224 The default for --openssldir is INSTALLTOP/ssl.
226 Anyone who uses --openssldir to specify where OpenSSL is to be
227 installed MUST change to use --prefix instead.
230 *) The GOST engine was out of date and therefore it has been removed. An up
231 to date GOST engine is now being maintained in an external repository.
232 See: https://wiki.openssl.org/index.php/Binaries. Libssl still retains
233 support for GOST ciphersuites (these are only activated if a GOST engine
237 *) EGD is no longer supported by default; use enable-egd when
239 [Ben Kaduk and Rich Salz]
241 *) The distribution now has Makefile.in files, which are used to
242 create Makefile's when Configure is run. *Configure must be run
243 before trying to build now.*
246 *) The return value for SSL_CIPHER_description() for error conditions
250 *) Support for RFC6698/RFC7671 DANE TLSA peer authentication.
252 Obtaining and performing DNSSEC validation of TLSA records is
253 the application's responsibility. The application provides
254 the TLSA records of its choice to OpenSSL, and these are then
255 used to authenticate the peer.
257 The TLSA records need not even come from DNS. They can, for
258 example, be used to implement local end-entity certificate or
259 trust-anchor "pinning", where the "pin" data takes the form
260 of TLSA records, which can augment or replace verification
261 based on the usual WebPKI public certification authorities.
264 *) Revert default OPENSSL_NO_DEPRECATED setting. Instead OpenSSL
265 continues to support deprecated interfaces in default builds.
266 However, applications are strongly advised to compile their
267 source files with -DOPENSSL_API_COMPAT=0x10100000L, which hides
268 the declarations of all interfaces deprecated in 0.9.8, 1.0.0
269 or the 1.1.0 releases.
271 In environments in which all applications have been ported to
272 not use any deprecated interfaces OpenSSL's Configure script
273 should be used with the --api=1.1.0 option to entirely remove
274 support for the deprecated features from the library and
275 unconditionally disable them in the installed headers.
276 Essentially the same effect can be achieved with the "no-deprecated"
277 argument to Configure, except that this will always restrict
278 the build to just the latest API, rather than a fixed API
281 As applications are ported to future revisions of the API,
282 they should update their compile-time OPENSSL_API_COMPAT define
283 accordingly, but in most cases should be able to continue to
284 compile with later releases.
286 The OPENSSL_API_COMPAT versions for 1.0.0, and 0.9.8 are
287 0x10000000L and 0x00908000L, respectively. However those
288 versions did not support the OPENSSL_API_COMPAT feature, and
289 so applications are not typically tested for explicit support
290 of just the undeprecated features of either release.
293 *) Add support for setting the minimum and maximum supported protocol.
294 It can bet set via the SSL_set_min_proto_version() and
295 SSL_set_max_proto_version(), or via the SSL_CONF's MinProtocol and
296 MaxProtcol. It's recommended to use the new APIs to disable
297 protocols instead of disabling individual protocols using
298 SSL_set_options() or SSL_CONF's Protocol. This change also
299 removes support for disabling TLS 1.2 in the OpenSSL TLS
300 client at compile time by defining OPENSSL_NO_TLS1_2_CLIENT.
303 *) Support for ChaCha20 and Poly1305 added to libcrypto and libssl.
306 *) New EC_KEY_METHOD, this replaces the older ECDSA_METHOD and ECDH_METHOD
307 and integrates ECDSA and ECDH functionality into EC. Implementations can
308 now redirect key generation and no longer need to convert to or from
311 Note: the ecdsa.h and ecdh.h headers are now no longer needed and just
312 include the ec.h header file instead.
315 *) Remove support for all 40 and 56 bit ciphers. This includes all the export
316 ciphers who are no longer supported and drops support the ephemeral RSA key
317 exchange. The LOW ciphers currently doesn't have any ciphers in it.
320 *) Made EVP_MD_CTX, EVP_MD, EVP_CIPHER_CTX, EVP_CIPHER and HMAC_CTX
321 opaque. For HMAC_CTX, the following constructors and destructors
324 HMAC_CTX *HMAC_CTX_new(void);
325 void HMAC_CTX_free(HMAC_CTX *ctx);
327 For EVP_MD and EVP_CIPHER, complete APIs to create, fill and
328 destroy such methods has been added. See EVP_MD_meth_new(3) and
329 EVP_CIPHER_meth_new(3) for documentation.
332 1) EVP_MD_CTX_cleanup(), EVP_CIPHER_CTX_cleanup() and
333 HMAC_CTX_cleanup() were removed. HMAC_CTX_reset() and
334 EVP_MD_CTX_reset() should be called instead to reinitialise
335 an already created structure.
336 2) For consistency with the majority of our object creators and
337 destructors, EVP_MD_CTX_(create|destroy) were renamed to
338 EVP_MD_CTX_(new|free). The old names are retained as macros
339 for deprecated builds.
342 *) Added ASYNC support. Libcrypto now includes the async sub-library to enable
343 cryptographic operations to be performed asynchronously as long as an
344 asynchronous capable engine is used. See the ASYNC_start_job() man page for
345 further details. Libssl has also had this capability integrated with the
346 introduction of the new mode SSL_MODE_ASYNC and associated error
347 SSL_ERROR_WANT_ASYNC. See the SSL_CTX_set_mode() and SSL_get_error() man
348 pages. This work was developed in partnership with Intel Corp.
351 *) SSL_{CTX_}set_ecdh_auto() has been removed and ECDH is support is
352 always enabled now. If you want to disable the support you should
353 exclude it using the list of supported ciphers. This also means that the
354 "-no_ecdhe" option has been removed from s_server.
357 *) SSL_{CTX}_set_tmp_ecdh() which can set 1 EC curve now internally calls
358 SSL_{CTX_}set1_curves() which can set a list.
361 *) Remove support for SSL_{CTX_}set_tmp_ecdh_callback(). You should set the
362 curve you want to support using SSL_{CTX_}set1_curves().
365 *) State machine rewrite. The state machine code has been significantly
366 refactored in order to remove much duplication of code and solve issues
367 with the old code (see ssl/statem/README for further details). This change
368 does have some associated API changes. Notably the SSL_state() function
369 has been removed and replaced by SSL_get_state which now returns an
370 "OSSL_HANDSHAKE_STATE" instead of an int. SSL_set_state() has been removed
371 altogether. The previous handshake states defined in ssl.h and ssl3.h have
375 *) All instances of the string "ssleay" in the public API were replaced
376 with OpenSSL (case-matching; e.g., OPENSSL_VERSION for #define's)
377 Some error codes related to internal RSA_eay API's were renamed.
380 *) The demo files in crypto/threads were moved to demo/threads.
383 *) Removed obsolete engines: 4758cca, aep, atalla, cswift, nuron, gmp,
385 [Matt Caswell, Rich Salz]
387 *) New ASN.1 embed macro.
389 New ASN.1 macro ASN1_EMBED. This is the same as ASN1_SIMPLE except the
390 structure is not allocated: it is part of the parent. That is instead of
398 This reduces memory fragmentation and make it impossible to accidentally
399 set a mandatory field to NULL.
401 This currently only works for some fields specifically a SEQUENCE, CHOICE,
402 or ASN1_STRING type which is part of a parent SEQUENCE. Since it is
403 equivalent to ASN1_SIMPLE it cannot be tagged, OPTIONAL, SET OF or
407 *) Remove EVP_CHECK_DES_KEY, a compile-time option that never compiled.
410 *) Removed DES and RC4 ciphersuites from DEFAULT. Also removed RC2 although
411 in 1.0.2 EXPORT was already removed and the only RC2 ciphersuite is also
412 an EXPORT one. COMPLEMENTOFDEFAULT has been updated accordingly to add
413 DES and RC4 ciphersuites.
416 *) Rewrite EVP_DecodeUpdate (base64 decoding) to fix several bugs.
417 This changes the decoding behaviour for some invalid messages,
418 though the change is mostly in the more lenient direction, and
419 legacy behaviour is preserved as much as possible.
422 *) Fix no-stdio build.
423 [ David Woodhouse <David.Woodhouse@intel.com> and also
424 Ivan Nestlerode <ivan.nestlerode@sonos.com> ]
426 *) New testing framework
427 The testing framework has been largely rewritten and is now using
428 perl and the perl modules Test::Harness and an extended variant of
429 Test::More called OpenSSL::Test to do its work. All test scripts in
430 test/ have been rewritten into test recipes, and all direct calls to
431 executables in test/Makefile have become individual recipes using the
432 simplified testing OpenSSL::Test::Simple.
434 For documentation on our testing modules, do:
436 perldoc test/testlib/OpenSSL/Test/Simple.pm
437 perldoc test/testlib/OpenSSL/Test.pm
441 *) Revamped memory debug; only -DCRYPTO_MDEBUG and -DCRYPTO_MDEBUG_ABORT
442 are used; the latter aborts on memory leaks (usually checked on exit).
443 Some undocumented "set malloc, etc., hooks" functions were removed
444 and others were changed. All are now documented.
447 *) In DSA_generate_parameters_ex, if the provided seed is too short,
449 [Rich Salz and Ismo Puustinen <ismo.puustinen@intel.com>]
451 *) Rewrite PSK to support ECDHE_PSK, DHE_PSK and RSA_PSK. Add ciphersuites
452 from RFC4279, RFC4785, RFC5487, RFC5489.
454 Thanks to Christian J. Dietrich and Giuseppe D'Angelo for the
455 original RSA_PSK patch.
458 *) Dropped support for the SSL3_FLAGS_DELAY_CLIENT_FINISHED flag. This SSLeay
459 era flag was never set throughout the codebase (only read). Also removed
460 SSL3_FLAGS_POP_BUFFER which was only used if
461 SSL3_FLAGS_DELAY_CLIENT_FINISHED was also set.
464 *) Changed the default name options in the "ca", "crl", "req" and "x509"
465 to be "oneline" instead of "compat".
468 *) Remove SSL_OP_TLS_BLOCK_PADDING_BUG. This is SSLeay legacy, we're
469 not aware of clients that still exhibit this bug, and the workaround
470 hasn't been working properly for a while.
473 *) The return type of BIO_number_read() and BIO_number_written() as well as
474 the corresponding num_read and num_write members in the BIO structure has
475 changed from unsigned long to uint64_t. On platforms where an unsigned
476 long is 32 bits (e.g. Windows) these counters could overflow if >4Gb is
480 *) Given the pervasive nature of TLS extensions it is inadvisable to run
481 OpenSSL without support for them. It also means that maintaining
482 the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
483 not well tested). Therefore the OPENSSL_NO_TLSEXT option has been removed.
486 *) Removed support for the two export grade static DH ciphersuites
487 EXP-DH-RSA-DES-CBC-SHA and EXP-DH-DSS-DES-CBC-SHA. These two ciphersuites
488 were newly added (along with a number of other static DH ciphersuites) to
489 1.0.2. However the two export ones have *never* worked since they were
490 introduced. It seems strange in any case to be adding new export
491 ciphersuites, and given "logjam" it also does not seem correct to fix them.
494 *) Version negotiation has been rewritten. In particular SSLv23_method(),
495 SSLv23_client_method() and SSLv23_server_method() have been deprecated,
496 and turned into macros which simply call the new preferred function names
497 TLS_method(), TLS_client_method() and TLS_server_method(). All new code
498 should use the new names instead. Also as part of this change the ssl23.h
499 header file has been removed.
502 *) Support for Kerberos ciphersuites in TLS (RFC2712) has been removed. This
503 code and the associated standard is no longer considered fit-for-purpose.
506 *) RT2547 was closed. When generating a private key, try to make the
507 output file readable only by the owner. This behavior change might
508 be noticeable when interacting with other software.
510 *) Documented all exdata functions. Added CRYPTO_free_ex_index.
514 *) Added HTTP GET support to the ocsp command.
517 *) Changed default digest for the dgst and enc commands from MD5 to
521 *) RAND_pseudo_bytes has been deprecated. Users should use RAND_bytes instead.
524 *) Added support for TLS extended master secret from
525 draft-ietf-tls-session-hash-03.txt. Thanks for Alfredo Pironti for an
526 initial patch which was a great help during development.
529 *) All libssl internal structures have been removed from the public header
530 files, and the OPENSSL_NO_SSL_INTERN option has been removed (since it is
531 now redundant). Users should not attempt to access internal structures
532 directly. Instead they should use the provided API functions.
535 *) config has been changed so that by default OPENSSL_NO_DEPRECATED is used.
536 Access to deprecated functions can be re-enabled by running config with
537 "enable-deprecated". In addition applications wishing to use deprecated
538 functions must define OPENSSL_USE_DEPRECATED. Note that this new behaviour
539 will, by default, disable some transitive includes that previously existed
540 in the header files (e.g. ec.h will no longer, by default, include bn.h)
543 *) Added support for OCB mode. OpenSSL has been granted a patent license
544 compatible with the OpenSSL license for use of OCB. Details are available
545 at https://www.openssl.org/source/OCB-patent-grant-OpenSSL.pdf. Support
546 for OCB can be removed by calling config with no-ocb.
549 *) SSLv2 support has been removed. It still supports receiving a SSLv2
550 compatible client hello.
553 *) Increased the minimal RSA keysize from 256 to 512 bits [Rich Salz],
554 done while fixing the error code for the key-too-small case.
555 [Annie Yousar <a.yousar@informatik.hu-berlin.de>]
557 *) CA.sh has been removmed; use CA.pl instead.
560 *) Removed old DES API.
563 *) Remove various unsupported platforms:
569 Sinix/ReliantUNIX RM400
574 16-bit platforms such as WIN16
577 *) Clean up OPENSSL_NO_xxx #define's
578 Use setbuf() and remove OPENSSL_NO_SETVBUF_IONBF
579 Rename OPENSSL_SYSNAME_xxx to OPENSSL_SYS_xxx
580 OPENSSL_NO_EC{DH,DSA} merged into OPENSSL_NO_EC
581 OPENSSL_NO_RIPEMD160, OPENSSL_NO_RIPEMD merged into OPENSSL_NO_RMD160
582 OPENSSL_NO_FP_API merged into OPENSSL_NO_STDIO
583 Remove OPENSSL_NO_BIO OPENSSL_NO_BUFFER OPENSSL_NO_CHAIN_VERIFY
584 OPENSSL_NO_EVP OPENSSL_NO_FIPS_ERR OPENSSL_NO_HASH_COMP
585 OPENSSL_NO_LHASH OPENSSL_NO_OBJECT OPENSSL_NO_SPEED OPENSSL_NO_STACK
586 OPENSSL_NO_X509 OPENSSL_NO_X509_VERIFY
587 Remove MS_STATIC; it's a relic from platforms <32 bits.
590 *) Cleaned up dead code
591 Remove all but one '#ifdef undef' which is to be looked at.
594 *) Clean up calling of xxx_free routines.
595 Just like free(), fix most of the xxx_free routines to accept
596 NULL. Remove the non-null checks from callers. Save much code.
599 *) Add secure heap for storage of private keys (when possible).
600 Add BIO_s_secmem(), CBIGNUM, etc.
601 Contributed by Akamai Technologies under our Corporate CLA.
604 *) Experimental support for a new, fast, unbiased prime candidate generator,
605 bn_probable_prime_dh_coprime(). Not currently used by any prime generator.
606 [Felix Laurie von Massenbach <felix@erbridge.co.uk>]
608 *) New output format NSS in the sess_id command line tool. This allows
609 exporting the session id and the master key in NSS keylog format.
610 [Martin Kaiser <martin@kaiser.cx>]
612 *) Harmonize version and its documentation. -f flag is used to display
614 [mancha <mancha1@zoho.com>]
616 *) Fix eckey_priv_encode so it immediately returns an error upon a failure
617 in i2d_ECPrivateKey. Thanks to Ted Unangst for feedback on this issue.
618 [mancha <mancha1@zoho.com>]
620 *) Fix some double frees. These are not thought to be exploitable.
621 [mancha <mancha1@zoho.com>]
623 *) A missing bounds check in the handling of the TLS heartbeat extension
624 can be used to reveal up to 64k of memory to a connected client or
627 Thanks for Neel Mehta of Google Security for discovering this bug and to
628 Adam Langley <agl@chromium.org> and Bodo Moeller <bmoeller@acm.org> for
629 preparing the fix (CVE-2014-0160)
630 [Adam Langley, Bodo Moeller]
632 *) Fix for the attack described in the paper "Recovering OpenSSL
633 ECDSA Nonces Using the FLUSH+RELOAD Cache Side-channel Attack"
634 by Yuval Yarom and Naomi Benger. Details can be obtained from:
635 http://eprint.iacr.org/2014/140
637 Thanks to Yuval Yarom and Naomi Benger for discovering this
638 flaw and to Yuval Yarom for supplying a fix (CVE-2014-0076)
639 [Yuval Yarom and Naomi Benger]
641 *) Use algorithm specific chains in SSL_CTX_use_certificate_chain_file():
642 this fixes a limitation in previous versions of OpenSSL.
645 *) Experimental encrypt-then-mac support.
647 Experimental support for encrypt then mac from
648 draft-gutmann-tls-encrypt-then-mac-02.txt
650 To enable it set the appropriate extension number (0x42 for the test
651 server) using e.g. -DTLSEXT_TYPE_encrypt_then_mac=0x42
653 For non-compliant peers (i.e. just about everything) this should have no
656 WARNING: EXPERIMENTAL, SUBJECT TO CHANGE.
660 *) Add EVP support for key wrapping algorithms, to avoid problems with
661 existing code the flag EVP_CIPHER_CTX_WRAP_ALLOW has to be set in
662 the EVP_CIPHER_CTX or an error is returned. Add AES and DES3 wrap
663 algorithms and include tests cases.
666 *) Extend CMS code to support RSA-PSS signatures and RSA-OAEP for
670 *) Extended RSA OAEP support via EVP_PKEY API. Options to specify digest,
671 MGF1 digest and OAEP label.
674 *) Make openssl verify return errors.
675 [Chris Palmer <palmer@google.com> and Ben Laurie]
677 *) New function ASN1_TIME_diff to calculate the difference between two
678 ASN1_TIME structures or one structure and the current time.
681 *) Update fips_test_suite to support multiple command line options. New
682 test to induce all self test errors in sequence and check expected
686 *) Add FIPS_{rsa,dsa,ecdsa}_{sign,verify} functions which digest and
687 sign or verify all in one operation.
690 *) Add fips_algvs: a multicall fips utility incorporating all the algorithm
691 test programs and fips_test_suite. Includes functionality to parse
692 the minimal script output of fipsalgest.pl directly.
695 *) Add authorisation parameter to FIPS_module_mode_set().
698 *) Add FIPS selftest for ECDH algorithm using P-224 and B-233 curves.
701 *) Use separate DRBG fields for internal and external flags. New function
702 FIPS_drbg_health_check() to perform on demand health checking. Add
703 generation tests to fips_test_suite with reduced health check interval to
704 demonstrate periodic health checking. Add "nodh" option to
705 fips_test_suite to skip very slow DH test.
708 *) New function FIPS_get_cipherbynid() to lookup FIPS supported ciphers
712 *) More extensive health check for DRBG checking many more failure modes.
713 New function FIPS_selftest_drbg_all() to handle every possible DRBG
714 combination: call this in fips_test_suite.
717 *) Add support for Dual EC DRBG from SP800-90. Update DRBG algorithm test
718 and POST to handle Dual EC cases.
721 *) Add support for canonical generation of DSA parameter 'g'. See
724 *) Add support for HMAC DRBG from SP800-90. Update DRBG algorithm test and
725 POST to handle HMAC cases.
728 *) Add functions FIPS_module_version() and FIPS_module_version_text()
729 to return numerical and string versions of the FIPS module number.
732 *) Rename FIPS_mode_set and FIPS_mode to FIPS_module_mode_set and
733 FIPS_module_mode. FIPS_mode and FIPS_mode_set will be implemented
734 outside the validated module in the FIPS capable OpenSSL.
737 *) Minor change to DRBG entropy callback semantics. In some cases
738 there is no multiple of the block length between min_len and
739 max_len. Allow the callback to return more than max_len bytes
740 of entropy but discard any extra: it is the callback's responsibility
741 to ensure that the extra data discarded does not impact the
742 requested amount of entropy.
745 *) Add PRNG security strength checks to RSA, DSA and ECDSA using
746 information in FIPS186-3, SP800-57 and SP800-131A.
749 *) CCM support via EVP. Interface is very similar to GCM case except we
750 must supply all data in one chunk (i.e. no update, final) and the
751 message length must be supplied if AAD is used. Add algorithm test
755 *) Initial version of POST overhaul. Add POST callback to allow the status
756 of POST to be monitored and/or failures induced. Modify fips_test_suite
757 to use callback. Always run all selftests even if one fails.
760 *) XTS support including algorithm test driver in the fips_gcmtest program.
761 Note: this does increase the maximum key length from 32 to 64 bytes but
762 there should be no binary compatibility issues as existing applications
763 will never use XTS mode.
766 *) Extensive reorganisation of FIPS PRNG behaviour. Remove all dependencies
767 to OpenSSL RAND code and replace with a tiny FIPS RAND API which also
768 performs algorithm blocking for unapproved PRNG types. Also do not
769 set PRNG type in FIPS_mode_set(): leave this to the application.
770 Add default OpenSSL DRBG handling: sets up FIPS PRNG and seeds with
771 the standard OpenSSL PRNG: set additional data to a date time vector.
774 *) Rename old X9.31 PRNG functions of the form FIPS_rand* to FIPS_x931*.
775 This shouldn't present any incompatibility problems because applications
776 shouldn't be using these directly and any that are will need to rethink
777 anyway as the X9.31 PRNG is now deprecated by FIPS 140-2
780 *) Extensive self tests and health checking required by SP800-90 DRBG.
781 Remove strength parameter from FIPS_drbg_instantiate and always
782 instantiate at maximum supported strength.
785 *) Add ECDH code to fips module and fips_ecdhvs for primitives only testing.
788 *) New algorithm test program fips_dhvs to handle DH primitives only testing.
791 *) New function DH_compute_key_padded() to compute a DH key and pad with
792 leading zeroes if needed: this complies with SP800-56A et al.
795 *) Initial implementation of SP800-90 DRBGs for Hash and CTR. Not used by
796 anything, incomplete, subject to change and largely untested at present.
799 *) Modify fipscanisteronly build option to only build the necessary object
800 files by filtering FIPS_EX_OBJ through a perl script in crypto/Makefile.
803 *) Add experimental option FIPSSYMS to give all symbols in
804 fipscanister.o and FIPS or fips prefix. This will avoid
805 conflicts with future versions of OpenSSL. Add perl script
806 util/fipsas.pl to preprocess assembly language source files
807 and rename any affected symbols.
810 *) Add selftest checks and algorithm block of non-fips algorithms in
811 FIPS mode. Remove DES2 from selftests.
814 *) Add ECDSA code to fips module. Add tiny fips_ecdsa_check to just
815 return internal method without any ENGINE dependencies. Add new
816 tiny fips sign and verify functions.
819 *) New build option no-ec2m to disable characteristic 2 code.
822 *) New build option "fipscanisteronly". This only builds fipscanister.o
823 and (currently) associated fips utilities. Uses the file Makefile.fips
824 instead of Makefile.org as the prototype.
827 *) Add some FIPS mode restrictions to GCM. Add internal IV generator.
828 Update fips_gcmtest to use IV generator.
831 *) Initial, experimental EVP support for AES-GCM. AAD can be input by
832 setting output buffer to NULL. The *Final function must be
833 called although it will not retrieve any additional data. The tag
834 can be set or retrieved with a ctrl. The IV length is by default 12
835 bytes (96 bits) but can be set to an alternative value. If the IV
836 length exceeds the maximum IV length (currently 16 bytes) it cannot be
840 *) New flag in ciphers: EVP_CIPH_FLAG_CUSTOM_CIPHER. This means the
841 underlying do_cipher function handles all cipher semantics itself
842 including padding and finalisation. This is useful if (for example)
843 an ENGINE cipher handles block padding itself. The behaviour of
844 do_cipher is subtly changed if this flag is set: the return value
845 is the number of characters written to the output buffer (zero is
846 no longer an error code) or a negative error code. Also if the
847 input buffer is NULL and length 0 finalisation should be performed.
850 *) If a candidate issuer certificate is already part of the constructed
851 path ignore it: new debug notification X509_V_ERR_PATH_LOOP for this case.
854 *) Improve forward-security support: add functions
856 void SSL_CTX_set_not_resumable_session_callback(SSL_CTX *ctx, int (*cb)(SSL *ssl, int is_forward_secure))
857 void SSL_set_not_resumable_session_callback(SSL *ssl, int (*cb)(SSL *ssl, int is_forward_secure))
859 for use by SSL/TLS servers; the callback function will be called whenever a
860 new session is created, and gets to decide whether the session may be
861 cached to make it resumable (return 0) or not (return 1). (As by the
862 SSL/TLS protocol specifications, the session_id sent by the server will be
863 empty to indicate that the session is not resumable; also, the server will
864 not generate RFC 4507 (RFC 5077) session tickets.)
866 A simple reasonable callback implementation is to return is_forward_secure.
867 This parameter will be set to 1 or 0 depending on the ciphersuite selected
868 by the SSL/TLS server library, indicating whether it can provide forward
870 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
872 *) New -verify_name option in command line utilities to set verification
876 *) Initial CMAC implementation. WARNING: EXPERIMENTAL, API MAY CHANGE.
877 Add CMAC pkey methods.
880 *) Experimental renegotiation in s_server -www mode. If the client
881 browses /reneg connection is renegotiated. If /renegcert it is
882 renegotiated requesting a certificate.
885 *) Add an "external" session cache for debugging purposes to s_server. This
886 should help trace issues which normally are only apparent in deployed
887 multi-process servers.
890 *) Extensive audit of libcrypto with DEBUG_UNUSED. Fix many cases where
891 return value is ignored. NB. The functions RAND_add(), RAND_seed(),
892 BIO_set_cipher() and some obscure PEM functions were changed so they
893 can now return an error. The RAND changes required a change to the
894 RAND_METHOD structure.
897 *) New macro __owur for "OpenSSL Warn Unused Result". This makes use of
898 a gcc attribute to warn if the result of a function is ignored. This
899 is enable if DEBUG_UNUSED is set. Add to several functions in evp.h
900 whose return value is often ignored.
903 *) New -noct, -requestct, -requirect and -ctlogfile options for s_client.
904 These allow SCTs (signed certificate timestamps) to be requested and
905 validated when establishing a connection.
906 [Rob Percival <robpercival@google.com>]
908 Changes between 1.0.2f and 1.0.2g [1 Mar 2016]
910 * Disable weak ciphers in SSLv3 and up in default builds of OpenSSL.
911 Builds that are not configured with "enable-weak-ssl-ciphers" will not
912 provide any "EXPORT" or "LOW" strength ciphers.
915 * Disable SSLv2 default build, default negotiation and weak ciphers. SSLv2
916 is by default disabled at build-time. Builds that are not configured with
917 "enable-ssl2" will not support SSLv2. Even if "enable-ssl2" is used,
918 users who want to negotiate SSLv2 via the version-flexible SSLv23_method()
919 will need to explicitly call either of:
921 SSL_CTX_clear_options(ctx, SSL_OP_NO_SSLv2);
923 SSL_clear_options(ssl, SSL_OP_NO_SSLv2);
925 as appropriate. Even if either of those is used, or the application
926 explicitly uses the version-specific SSLv2_method() or its client and
927 server variants, SSLv2 ciphers vulnerable to exhaustive search key
928 recovery have been removed. Specifically, the SSLv2 40-bit EXPORT
929 ciphers, and SSLv2 56-bit DES are no longer available.
933 *) Fix a double-free in DSA code
935 A double free bug was discovered when OpenSSL parses malformed DSA private
936 keys and could lead to a DoS attack or memory corruption for applications
937 that receive DSA private keys from untrusted sources. This scenario is
940 This issue was reported to OpenSSL by Adam Langley(Google/BoringSSL) using
945 *) Disable SRP fake user seed to address a server memory leak.
947 Add a new method SRP_VBASE_get1_by_user that handles the seed properly.
949 SRP_VBASE_get_by_user had inconsistent memory management behaviour.
950 In order to fix an unavoidable memory leak, SRP_VBASE_get_by_user
951 was changed to ignore the "fake user" SRP seed, even if the seed
954 Users should use SRP_VBASE_get1_by_user instead. Note that in
955 SRP_VBASE_get1_by_user, caller must free the returned value. Note
956 also that even though configuring the SRP seed attempts to hide
957 invalid usernames by continuing the handshake with fake
958 credentials, this behaviour is not constant time and no strong
959 guarantees are made that the handshake is indistinguishable from
960 that of a valid user.
964 *) Fix BN_hex2bn/BN_dec2bn NULL pointer deref/heap corruption
966 In the BN_hex2bn function the number of hex digits is calculated using an
967 int value |i|. Later |bn_expand| is called with a value of |i * 4|. For
968 large values of |i| this can result in |bn_expand| not allocating any
969 memory because |i * 4| is negative. This can leave the internal BIGNUM data
970 field as NULL leading to a subsequent NULL ptr deref. For very large values
971 of |i|, the calculation |i * 4| could be a positive value smaller than |i|.
972 In this case memory is allocated to the internal BIGNUM data field, but it
973 is insufficiently sized leading to heap corruption. A similar issue exists
974 in BN_dec2bn. This could have security consequences if BN_hex2bn/BN_dec2bn
975 is ever called by user applications with very large untrusted hex/dec data.
976 This is anticipated to be a rare occurrence.
978 All OpenSSL internal usage of these functions use data that is not expected
979 to be untrusted, e.g. config file data or application command line
980 arguments. If user developed applications generate config file data based
981 on untrusted data then it is possible that this could also lead to security
982 consequences. This is also anticipated to be rare.
984 This issue was reported to OpenSSL by Guido Vranken.
988 *) Fix memory issues in BIO_*printf functions
990 The internal |fmtstr| function used in processing a "%s" format string in
991 the BIO_*printf functions could overflow while calculating the length of a
992 string and cause an OOB read when printing very long strings.
994 Additionally the internal |doapr_outch| function can attempt to write to an
995 OOB memory location (at an offset from the NULL pointer) in the event of a
996 memory allocation failure. In 1.0.2 and below this could be caused where
997 the size of a buffer to be allocated is greater than INT_MAX. E.g. this
998 could be in processing a very long "%s" format string. Memory leaks can
1001 The first issue may mask the second issue dependent on compiler behaviour.
1002 These problems could enable attacks where large amounts of untrusted data
1003 is passed to the BIO_*printf functions. If applications use these functions
1004 in this way then they could be vulnerable. OpenSSL itself uses these
1005 functions when printing out human-readable dumps of ASN.1 data. Therefore
1006 applications that print this data could be vulnerable if the data is from
1007 untrusted sources. OpenSSL command line applications could also be
1008 vulnerable where they print out ASN.1 data, or if untrusted data is passed
1009 as command line arguments.
1011 Libssl is not considered directly vulnerable. Additionally certificates etc
1012 received via remote connections via libssl are also unlikely to be able to
1013 trigger these issues because of message size limits enforced within libssl.
1015 This issue was reported to OpenSSL Guido Vranken.
1019 *) Side channel attack on modular exponentiation
1021 A side-channel attack was found which makes use of cache-bank conflicts on
1022 the Intel Sandy-Bridge microarchitecture which could lead to the recovery
1023 of RSA keys. The ability to exploit this issue is limited as it relies on
1024 an attacker who has control of code in a thread running on the same
1025 hyper-threaded core as the victim thread which is performing decryptions.
1027 This issue was reported to OpenSSL by Yuval Yarom, The University of
1028 Adelaide and NICTA, Daniel Genkin, Technion and Tel Aviv University, and
1029 Nadia Heninger, University of Pennsylvania with more information at
1030 http://cachebleed.info.
1034 *) Change the req app to generate a 2048-bit RSA/DSA key by default,
1035 if no keysize is specified with default_bits. This fixes an
1036 omission in an earlier change that changed all RSA/DSA key generation
1037 apps to use 2048 bits by default.
1040 Changes between 1.0.2e and 1.0.2f [28 Jan 2016]
1041 *) DH small subgroups
1043 Historically OpenSSL only ever generated DH parameters based on "safe"
1044 primes. More recently (in version 1.0.2) support was provided for
1045 generating X9.42 style parameter files such as those required for RFC 5114
1046 support. The primes used in such files may not be "safe". Where an
1047 application is using DH configured with parameters based on primes that are
1048 not "safe" then an attacker could use this fact to find a peer's private
1049 DH exponent. This attack requires that the attacker complete multiple
1050 handshakes in which the peer uses the same private DH exponent. For example
1051 this could be used to discover a TLS server's private DH exponent if it's
1052 reusing the private DH exponent or it's using a static DH ciphersuite.
1054 OpenSSL provides the option SSL_OP_SINGLE_DH_USE for ephemeral DH (DHE) in
1055 TLS. It is not on by default. If the option is not set then the server
1056 reuses the same private DH exponent for the life of the server process and
1057 would be vulnerable to this attack. It is believed that many popular
1058 applications do set this option and would therefore not be at risk.
1060 The fix for this issue adds an additional check where a "q" parameter is
1061 available (as is the case in X9.42 based parameters). This detects the
1062 only known attack, and is the only possible defense for static DH
1063 ciphersuites. This could have some performance impact.
1065 Additionally the SSL_OP_SINGLE_DH_USE option has been switched on by
1066 default and cannot be disabled. This could have some performance impact.
1068 This issue was reported to OpenSSL by Antonio Sanso (Adobe).
1072 *) SSLv2 doesn't block disabled ciphers
1074 A malicious client can negotiate SSLv2 ciphers that have been disabled on
1075 the server and complete SSLv2 handshakes even if all SSLv2 ciphers have
1076 been disabled, provided that the SSLv2 protocol was not also disabled via
1079 This issue was reported to OpenSSL on 26th December 2015 by Nimrod Aviram
1080 and Sebastian Schinzel.
1084 Changes between 1.0.2d and 1.0.2e [3 Dec 2015]
1086 *) BN_mod_exp may produce incorrect results on x86_64
1088 There is a carry propagating bug in the x86_64 Montgomery squaring
1089 procedure. No EC algorithms are affected. Analysis suggests that attacks
1090 against RSA and DSA as a result of this defect would be very difficult to
1091 perform and are not believed likely. Attacks against DH are considered just
1092 feasible (although very difficult) because most of the work necessary to
1093 deduce information about a private key may be performed offline. The amount
1094 of resources required for such an attack would be very significant and
1095 likely only accessible to a limited number of attackers. An attacker would
1096 additionally need online access to an unpatched system using the target
1097 private key in a scenario with persistent DH parameters and a private
1098 key that is shared between multiple clients. For example this can occur by
1099 default in OpenSSL DHE based SSL/TLS ciphersuites.
1101 This issue was reported to OpenSSL by Hanno Böck.
1105 *) Certificate verify crash with missing PSS parameter
1107 The signature verification routines will crash with a NULL pointer
1108 dereference if presented with an ASN.1 signature using the RSA PSS
1109 algorithm and absent mask generation function parameter. Since these
1110 routines are used to verify certificate signature algorithms this can be
1111 used to crash any certificate verification operation and exploited in a
1112 DoS attack. Any application which performs certificate verification is
1113 vulnerable including OpenSSL clients and servers which enable client
1116 This issue was reported to OpenSSL by Loïc Jonas Etienne (Qnective AG).
1120 *) X509_ATTRIBUTE memory leak
1122 When presented with a malformed X509_ATTRIBUTE structure OpenSSL will leak
1123 memory. This structure is used by the PKCS#7 and CMS routines so any
1124 application which reads PKCS#7 or CMS data from untrusted sources is
1125 affected. SSL/TLS is not affected.
1127 This issue was reported to OpenSSL by Adam Langley (Google/BoringSSL) using
1132 *) Rewrite EVP_DecodeUpdate (base64 decoding) to fix several bugs.
1133 This changes the decoding behaviour for some invalid messages,
1134 though the change is mostly in the more lenient direction, and
1135 legacy behaviour is preserved as much as possible.
1138 *) In DSA_generate_parameters_ex, if the provided seed is too short,
1140 [Rich Salz and Ismo Puustinen <ismo.puustinen@intel.com>]
1142 Changes between 1.0.2c and 1.0.2d [9 Jul 2015]
1144 *) Alternate chains certificate forgery
1146 During certificate verfification, OpenSSL will attempt to find an
1147 alternative certificate chain if the first attempt to build such a chain
1148 fails. An error in the implementation of this logic can mean that an
1149 attacker could cause certain checks on untrusted certificates to be
1150 bypassed, such as the CA flag, enabling them to use a valid leaf
1151 certificate to act as a CA and "issue" an invalid certificate.
1153 This issue was reported to OpenSSL by Adam Langley/David Benjamin
1157 Changes between 1.0.2b and 1.0.2c [12 Jun 2015]
1159 *) Fix HMAC ABI incompatibility. The previous version introduced an ABI
1160 incompatibility in the handling of HMAC. The previous ABI has now been
1164 Changes between 1.0.2a and 1.0.2b [11 Jun 2015]
1166 *) Malformed ECParameters causes infinite loop
1168 When processing an ECParameters structure OpenSSL enters an infinite loop
1169 if the curve specified is over a specially malformed binary polynomial
1172 This can be used to perform denial of service against any
1173 system which processes public keys, certificate requests or
1174 certificates. This includes TLS clients and TLS servers with
1175 client authentication enabled.
1177 This issue was reported to OpenSSL by Joseph Barr-Pixton.
1181 *) Exploitable out-of-bounds read in X509_cmp_time
1183 X509_cmp_time does not properly check the length of the ASN1_TIME
1184 string and can read a few bytes out of bounds. In addition,
1185 X509_cmp_time accepts an arbitrary number of fractional seconds in the
1188 An attacker can use this to craft malformed certificates and CRLs of
1189 various sizes and potentially cause a segmentation fault, resulting in
1190 a DoS on applications that verify certificates or CRLs. TLS clients
1191 that verify CRLs are affected. TLS clients and servers with client
1192 authentication enabled may be affected if they use custom verification
1195 This issue was reported to OpenSSL by Robert Swiecki (Google), and
1196 independently by Hanno Böck.
1200 *) PKCS7 crash with missing EnvelopedContent
1202 The PKCS#7 parsing code does not handle missing inner EncryptedContent
1203 correctly. An attacker can craft malformed ASN.1-encoded PKCS#7 blobs
1204 with missing content and trigger a NULL pointer dereference on parsing.
1206 Applications that decrypt PKCS#7 data or otherwise parse PKCS#7
1207 structures from untrusted sources are affected. OpenSSL clients and
1208 servers are not affected.
1210 This issue was reported to OpenSSL by Michal Zalewski (Google).
1214 *) CMS verify infinite loop with unknown hash function
1216 When verifying a signedData message the CMS code can enter an infinite loop
1217 if presented with an unknown hash function OID. This can be used to perform
1218 denial of service against any system which verifies signedData messages using
1220 This issue was reported to OpenSSL by Johannes Bauer.
1224 *) Race condition handling NewSessionTicket
1226 If a NewSessionTicket is received by a multi-threaded client when attempting to
1227 reuse a previous ticket then a race condition can occur potentially leading to
1228 a double free of the ticket data.
1232 *) Only support 256-bit or stronger elliptic curves with the
1233 'ecdh_auto' setting (server) or by default (client). Of supported
1234 curves, prefer P-256 (both).
1237 Changes between 1.0.2 and 1.0.2a [19 Mar 2015]
1239 *) ClientHello sigalgs DoS fix
1241 If a client connects to an OpenSSL 1.0.2 server and renegotiates with an
1242 invalid signature algorithms extension a NULL pointer dereference will
1243 occur. This can be exploited in a DoS attack against the server.
1245 This issue was was reported to OpenSSL by David Ramos of Stanford
1248 [Stephen Henson and Matt Caswell]
1250 *) Multiblock corrupted pointer fix
1252 OpenSSL 1.0.2 introduced the "multiblock" performance improvement. This
1253 feature only applies on 64 bit x86 architecture platforms that support AES
1254 NI instructions. A defect in the implementation of "multiblock" can cause
1255 OpenSSL's internal write buffer to become incorrectly set to NULL when
1256 using non-blocking IO. Typically, when the user application is using a
1257 socket BIO for writing, this will only result in a failed connection.
1258 However if some other BIO is used then it is likely that a segmentation
1259 fault will be triggered, thus enabling a potential DoS attack.
1261 This issue was reported to OpenSSL by Daniel Danner and Rainer Mueller.
1265 *) Segmentation fault in DTLSv1_listen fix
1267 The DTLSv1_listen function is intended to be stateless and processes the
1268 initial ClientHello from many peers. It is common for user code to loop
1269 over the call to DTLSv1_listen until a valid ClientHello is received with
1270 an associated cookie. A defect in the implementation of DTLSv1_listen means
1271 that state is preserved in the SSL object from one invocation to the next
1272 that can lead to a segmentation fault. Errors processing the initial
1273 ClientHello can trigger this scenario. An example of such an error could be
1274 that a DTLS1.0 only client is attempting to connect to a DTLS1.2 only
1277 This issue was reported to OpenSSL by Per Allansson.
1281 *) Segmentation fault in ASN1_TYPE_cmp fix
1283 The function ASN1_TYPE_cmp will crash with an invalid read if an attempt is
1284 made to compare ASN.1 boolean types. Since ASN1_TYPE_cmp is used to check
1285 certificate signature algorithm consistency this can be used to crash any
1286 certificate verification operation and exploited in a DoS attack. Any
1287 application which performs certificate verification is vulnerable including
1288 OpenSSL clients and servers which enable client authentication.
1292 *) Segmentation fault for invalid PSS parameters fix
1294 The signature verification routines will crash with a NULL pointer
1295 dereference if presented with an ASN.1 signature using the RSA PSS
1296 algorithm and invalid parameters. Since these routines are used to verify
1297 certificate signature algorithms this can be used to crash any
1298 certificate verification operation and exploited in a DoS attack. Any
1299 application which performs certificate verification is vulnerable including
1300 OpenSSL clients and servers which enable client authentication.
1302 This issue was was reported to OpenSSL by Brian Carpenter.
1306 *) ASN.1 structure reuse memory corruption fix
1308 Reusing a structure in ASN.1 parsing may allow an attacker to cause
1309 memory corruption via an invalid write. Such reuse is and has been
1310 strongly discouraged and is believed to be rare.
1312 Applications that parse structures containing CHOICE or ANY DEFINED BY
1313 components may be affected. Certificate parsing (d2i_X509 and related
1314 functions) are however not affected. OpenSSL clients and servers are
1319 *) PKCS7 NULL pointer dereferences fix
1321 The PKCS#7 parsing code does not handle missing outer ContentInfo
1322 correctly. An attacker can craft malformed ASN.1-encoded PKCS#7 blobs with
1323 missing content and trigger a NULL pointer dereference on parsing.
1325 Applications that verify PKCS#7 signatures, decrypt PKCS#7 data or
1326 otherwise parse PKCS#7 structures from untrusted sources are
1327 affected. OpenSSL clients and servers are not affected.
1329 This issue was reported to OpenSSL by Michal Zalewski (Google).
1333 *) DoS via reachable assert in SSLv2 servers fix
1335 A malicious client can trigger an OPENSSL_assert (i.e., an abort) in
1336 servers that both support SSLv2 and enable export cipher suites by sending
1337 a specially crafted SSLv2 CLIENT-MASTER-KEY message.
1339 This issue was discovered by Sean Burford (Google) and Emilia Käsper
1340 (OpenSSL development team).
1344 *) Empty CKE with client auth and DHE fix
1346 If client auth is used then a server can seg fault in the event of a DHE
1347 ciphersuite being selected and a zero length ClientKeyExchange message
1348 being sent by the client. This could be exploited in a DoS attack.
1352 *) Handshake with unseeded PRNG fix
1354 Under certain conditions an OpenSSL 1.0.2 client can complete a handshake
1355 with an unseeded PRNG. The conditions are:
1356 - The client is on a platform where the PRNG has not been seeded
1357 automatically, and the user has not seeded manually
1358 - A protocol specific client method version has been used (i.e. not
1359 SSL_client_methodv23)
1360 - A ciphersuite is used that does not require additional random data from
1361 the PRNG beyond the initial ClientHello client random (e.g. PSK-RC4-SHA).
1363 If the handshake succeeds then the client random that has been used will
1364 have been generated from a PRNG with insufficient entropy and therefore the
1365 output may be predictable.
1367 For example using the following command with an unseeded openssl will
1368 succeed on an unpatched platform:
1370 openssl s_client -psk 1a2b3c4d -tls1_2 -cipher PSK-RC4-SHA
1374 *) Use After Free following d2i_ECPrivatekey error fix
1376 A malformed EC private key file consumed via the d2i_ECPrivateKey function
1377 could cause a use after free condition. This, in turn, could cause a double
1378 free in several private key parsing functions (such as d2i_PrivateKey
1379 or EVP_PKCS82PKEY) and could lead to a DoS attack or memory corruption
1380 for applications that receive EC private keys from untrusted
1381 sources. This scenario is considered rare.
1383 This issue was discovered by the BoringSSL project and fixed in their
1388 *) X509_to_X509_REQ NULL pointer deref fix
1390 The function X509_to_X509_REQ will crash with a NULL pointer dereference if
1391 the certificate key is invalid. This function is rarely used in practice.
1393 This issue was discovered by Brian Carpenter.
1397 *) Removed the export ciphers from the DEFAULT ciphers
1400 Changes between 1.0.1l and 1.0.2 [22 Jan 2015]
1402 *) Facilitate "universal" ARM builds targeting range of ARM ISAs, e.g.
1403 ARMv5 through ARMv8, as opposite to "locking" it to single one.
1404 So far those who have to target multiple plaforms would compromise
1405 and argue that binary targeting say ARMv5 would still execute on
1406 ARMv8. "Universal" build resolves this compromise by providing
1407 near-optimal performance even on newer platforms.
1410 *) Accelerated NIST P-256 elliptic curve implementation for x86_64
1411 (other platforms pending).
1412 [Shay Gueron & Vlad Krasnov (Intel Corp), Andy Polyakov]
1414 *) Add support for the SignedCertificateTimestampList certificate and
1415 OCSP response extensions from RFC6962.
1418 *) Fix ec_GFp_simple_points_make_affine (thus, EC_POINTs_mul etc.)
1419 for corner cases. (Certain input points at infinity could lead to
1420 bogus results, with non-infinity inputs mapped to infinity too.)
1423 *) Initial support for PowerISA 2.0.7, first implemented in POWER8.
1424 This covers AES, SHA256/512 and GHASH. "Initial" means that most
1425 common cases are optimized and there still is room for further
1426 improvements. Vector Permutation AES for Altivec is also added.
1429 *) Add support for little-endian ppc64 Linux target.
1430 [Marcelo Cerri (IBM)]
1432 *) Initial support for AMRv8 ISA crypto extensions. This covers AES,
1433 SHA1, SHA256 and GHASH. "Initial" means that most common cases
1434 are optimized and there still is room for further improvements.
1435 Both 32- and 64-bit modes are supported.
1436 [Andy Polyakov, Ard Biesheuvel (Linaro)]
1438 *) Improved ARMv7 NEON support.
1441 *) Support for SPARC Architecture 2011 crypto extensions, first
1442 implemented in SPARC T4. This covers AES, DES, Camellia, SHA1,
1443 SHA256/512, MD5, GHASH and modular exponentiation.
1444 [Andy Polyakov, David Miller]
1446 *) Accelerated modular exponentiation for Intel processors, a.k.a.
1448 [Shay Gueron & Vlad Krasnov (Intel Corp)]
1450 *) Support for new and upcoming Intel processors, including AVX2,
1451 BMI and SHA ISA extensions. This includes additional "stitched"
1452 implementations, AESNI-SHA256 and GCM, and multi-buffer support
1455 This work was sponsored by Intel Corp.
1458 *) Support for DTLS 1.2. This adds two sets of DTLS methods: DTLS_*_method()
1459 supports both DTLS 1.2 and 1.0 and should use whatever version the peer
1460 supports and DTLSv1_2_*_method() which supports DTLS 1.2 only.
1463 *) Use algorithm specific chains in SSL_CTX_use_certificate_chain_file():
1464 this fixes a limiation in previous versions of OpenSSL.
1467 *) Extended RSA OAEP support via EVP_PKEY API. Options to specify digest,
1468 MGF1 digest and OAEP label.
1471 *) Add EVP support for key wrapping algorithms, to avoid problems with
1472 existing code the flag EVP_CIPHER_CTX_WRAP_ALLOW has to be set in
1473 the EVP_CIPHER_CTX or an error is returned. Add AES and DES3 wrap
1474 algorithms and include tests cases.
1477 *) Add functions to allocate and set the fields of an ECDSA_METHOD
1479 [Douglas E. Engert, Steve Henson]
1481 *) New functions OPENSSL_gmtime_diff and ASN1_TIME_diff to find the
1482 difference in days and seconds between two tm or ASN1_TIME structures.
1485 *) Add -rev test option to s_server to just reverse order of characters
1486 received by client and send back to server. Also prints an abbreviated
1487 summary of the connection parameters.
1490 *) New option -brief for s_client and s_server to print out a brief summary
1491 of connection parameters.
1494 *) Add callbacks for arbitrary TLS extensions.
1495 [Trevor Perrin <trevp@trevp.net> and Ben Laurie]
1497 *) New option -crl_download in several openssl utilities to download CRLs
1498 from CRLDP extension in certificates.
1501 *) New options -CRL and -CRLform for s_client and s_server for CRLs.
1504 *) New function X509_CRL_diff to generate a delta CRL from the difference
1505 of two full CRLs. Add support to "crl" utility.
1508 *) New functions to set lookup_crls function and to retrieve
1509 X509_STORE from X509_STORE_CTX.
1512 *) Print out deprecated issuer and subject unique ID fields in
1516 *) Extend OCSP I/O functions so they can be used for simple general purpose
1517 HTTP as well as OCSP. New wrapper function which can be used to download
1518 CRLs using the OCSP API.
1521 *) Delegate command line handling in s_client/s_server to SSL_CONF APIs.
1524 *) SSL_CONF* functions. These provide a common framework for application
1525 configuration using configuration files or command lines.
1528 *) SSL/TLS tracing code. This parses out SSL/TLS records using the
1529 message callback and prints the results. Needs compile time option
1530 "enable-ssl-trace". New options to s_client and s_server to enable
1534 *) New ctrl and macro to retrieve supported points extensions.
1535 Print out extension in s_server and s_client.
1538 *) New functions to retrieve certificate signature and signature
1542 *) Add functions to retrieve and manipulate the raw cipherlist sent by a
1546 *) New Suite B modes for TLS code. These use and enforce the requirements
1547 of RFC6460: restrict ciphersuites, only permit Suite B algorithms and
1548 only use Suite B curves. The Suite B modes can be set by using the
1549 strings "SUITEB128", "SUITEB192" or "SUITEB128ONLY" for the cipherstring.
1552 *) New chain verification flags for Suite B levels of security. Check
1553 algorithms are acceptable when flags are set in X509_verify_cert.
1556 *) Make tls1_check_chain return a set of flags indicating checks passed
1557 by a certificate chain. Add additional tests to handle client
1558 certificates: checks for matching certificate type and issuer name
1562 *) If an attempt is made to use a signature algorithm not in the peer
1563 preference list abort the handshake. If client has no suitable
1564 signature algorithms in response to a certificate request do not
1565 use the certificate.
1568 *) If server EC tmp key is not in client preference list abort handshake.
1571 *) Add support for certificate stores in CERT structure. This makes it
1572 possible to have different stores per SSL structure or one store in
1573 the parent SSL_CTX. Include distint stores for certificate chain
1574 verification and chain building. New ctrl SSL_CTRL_BUILD_CERT_CHAIN
1575 to build and store a certificate chain in CERT structure: returing
1576 an error if the chain cannot be built: this will allow applications
1577 to test if a chain is correctly configured.
1579 Note: if the CERT based stores are not set then the parent SSL_CTX
1580 store is used to retain compatibility with existing behaviour.
1584 *) New function ssl_set_client_disabled to set a ciphersuite disabled
1585 mask based on the current session, check mask when sending client
1586 hello and checking the requested ciphersuite.
1589 *) New ctrls to retrieve and set certificate types in a certificate
1590 request message. Print out received values in s_client. If certificate
1591 types is not set with custom values set sensible values based on
1592 supported signature algorithms.
1595 *) Support for distinct client and server supported signature algorithms.
1598 *) Add certificate callback. If set this is called whenever a certificate
1599 is required by client or server. An application can decide which
1600 certificate chain to present based on arbitrary criteria: for example
1601 supported signature algorithms. Add very simple example to s_server.
1602 This fixes many of the problems and restrictions of the existing client
1603 certificate callback: for example you can now clear an existing
1604 certificate and specify the whole chain.
1607 *) Add new "valid_flags" field to CERT_PKEY structure which determines what
1608 the certificate can be used for (if anything). Set valid_flags field
1609 in new tls1_check_chain function. Simplify ssl_set_cert_masks which used
1610 to have similar checks in it.
1612 Add new "cert_flags" field to CERT structure and include a "strict mode".
1613 This enforces some TLS certificate requirements (such as only permitting
1614 certificate signature algorithms contained in the supported algorithms
1615 extension) which some implementations ignore: this option should be used
1616 with caution as it could cause interoperability issues.
1619 *) Update and tidy signature algorithm extension processing. Work out
1620 shared signature algorithms based on preferences and peer algorithms
1621 and print them out in s_client and s_server. Abort handshake if no
1622 shared signature algorithms.
1625 *) Add new functions to allow customised supported signature algorithms
1626 for SSL and SSL_CTX structures. Add options to s_client and s_server
1630 *) New function SSL_certs_clear() to delete all references to certificates
1631 from an SSL structure. Before this once a certificate had been added
1632 it couldn't be removed.
1635 *) Integrate hostname, email address and IP address checking with certificate
1636 verification. New verify options supporting checking in opensl utility.
1639 *) Fixes and wildcard matching support to hostname and email checking
1640 functions. Add manual page.
1641 [Florian Weimer (Red Hat Product Security Team)]
1643 *) New functions to check a hostname email or IP address against a
1644 certificate. Add options x509 utility to print results of checks against
1648 *) Fix OCSP checking.
1649 [Rob Stradling <rob.stradling@comodo.com> and Ben Laurie]
1651 *) Initial experimental support for explicitly trusted non-root CAs.
1652 OpenSSL still tries to build a complete chain to a root but if an
1653 intermediate CA has a trust setting included that is used. The first
1654 setting is used: whether to trust (e.g., -addtrust option to the x509
1658 *) Add -trusted_first option which attempts to find certificates in the
1659 trusted store even if an untrusted chain is also supplied.
1662 *) MIPS assembly pack updates: support for MIPS32r2 and SmartMIPS ASE,
1663 platform support for Linux and Android.
1666 *) Support for linux-x32, ILP32 environment in x86_64 framework.
1669 *) Experimental multi-implementation support for FIPS capable OpenSSL.
1670 When in FIPS mode the approved implementations are used as normal,
1671 when not in FIPS mode the internal unapproved versions are used instead.
1672 This means that the FIPS capable OpenSSL isn't forced to use the
1673 (often lower performance) FIPS implementations outside FIPS mode.
1676 *) Transparently support X9.42 DH parameters when calling
1677 PEM_read_bio_DHparameters. This means existing applications can handle
1678 the new parameter format automatically.
1681 *) Initial experimental support for X9.42 DH parameter format: mainly
1682 to support use of 'q' parameter for RFC5114 parameters.
1685 *) Add DH parameters from RFC5114 including test data to dhtest.
1688 *) Support for automatic EC temporary key parameter selection. If enabled
1689 the most preferred EC parameters are automatically used instead of
1690 hardcoded fixed parameters. Now a server just has to call:
1691 SSL_CTX_set_ecdh_auto(ctx, 1) and the server will automatically
1692 support ECDH and use the most appropriate parameters.
1695 *) Enhance and tidy EC curve and point format TLS extension code. Use
1696 static structures instead of allocation if default values are used.
1697 New ctrls to set curves we wish to support and to retrieve shared curves.
1698 Print out shared curves in s_server. New options to s_server and s_client
1699 to set list of supported curves.
1702 *) New ctrls to retrieve supported signature algorithms and
1703 supported curve values as an array of NIDs. Extend openssl utility
1704 to print out received values.
1707 *) Add new APIs EC_curve_nist2nid and EC_curve_nid2nist which convert
1708 between NIDs and the more common NIST names such as "P-256". Enhance
1709 ecparam utility and ECC method to recognise the NIST names for curves.
1712 *) Enhance SSL/TLS certificate chain handling to support different
1713 chains for each certificate instead of one chain in the parent SSL_CTX.
1716 *) Support for fixed DH ciphersuite client authentication: where both
1717 server and client use DH certificates with common parameters.
1720 *) Support for fixed DH ciphersuites: those requiring DH server
1724 *) New function i2d_re_X509_tbs for re-encoding the TBS portion of
1726 Note: Related 1.0.2-beta specific macros X509_get_cert_info,
1727 X509_CINF_set_modified, X509_CINF_get_issuer, X509_CINF_get_extensions and
1728 X509_CINF_get_signature were reverted post internal team review.
1730 Changes between 1.0.1k and 1.0.1l [15 Jan 2015]
1732 *) Build fixes for the Windows and OpenVMS platforms
1733 [Matt Caswell and Richard Levitte]
1735 Changes between 1.0.1j and 1.0.1k [8 Jan 2015]
1737 *) Fix DTLS segmentation fault in dtls1_get_record. A carefully crafted DTLS
1738 message can cause a segmentation fault in OpenSSL due to a NULL pointer
1739 dereference. This could lead to a Denial Of Service attack. Thanks to
1740 Markus Stenberg of Cisco Systems, Inc. for reporting this issue.
1744 *) Fix DTLS memory leak in dtls1_buffer_record. A memory leak can occur in the
1745 dtls1_buffer_record function under certain conditions. In particular this
1746 could occur if an attacker sent repeated DTLS records with the same
1747 sequence number but for the next epoch. The memory leak could be exploited
1748 by an attacker in a Denial of Service attack through memory exhaustion.
1749 Thanks to Chris Mueller for reporting this issue.
1753 *) Fix issue where no-ssl3 configuration sets method to NULL. When openssl is
1754 built with the no-ssl3 option and a SSL v3 ClientHello is received the ssl
1755 method would be set to NULL which could later result in a NULL pointer
1756 dereference. Thanks to Frank Schmirler for reporting this issue.
1760 *) Abort handshake if server key exchange message is omitted for ephemeral
1763 Thanks to Karthikeyan Bhargavan of the PROSECCO team at INRIA for
1764 reporting this issue.
1768 *) Remove non-export ephemeral RSA code on client and server. This code
1769 violated the TLS standard by allowing the use of temporary RSA keys in
1770 non-export ciphersuites and could be used by a server to effectively
1771 downgrade the RSA key length used to a value smaller than the server
1772 certificate. Thanks for Karthikeyan Bhargavan of the PROSECCO team at
1773 INRIA or reporting this issue.
1777 *) Fixed issue where DH client certificates are accepted without verification.
1778 An OpenSSL server will accept a DH certificate for client authentication
1779 without the certificate verify message. This effectively allows a client to
1780 authenticate without the use of a private key. This only affects servers
1781 which trust a client certificate authority which issues certificates
1782 containing DH keys: these are extremely rare and hardly ever encountered.
1783 Thanks for Karthikeyan Bhargavan of the PROSECCO team at INRIA or reporting
1788 *) Ensure that the session ID context of an SSL is updated when its
1789 SSL_CTX is updated via SSL_set_SSL_CTX.
1791 The session ID context is typically set from the parent SSL_CTX,
1792 and can vary with the CTX.
1795 *) Fix various certificate fingerprint issues.
1797 By using non-DER or invalid encodings outside the signed portion of a
1798 certificate the fingerprint can be changed without breaking the signature.
1799 Although no details of the signed portion of the certificate can be changed
1800 this can cause problems with some applications: e.g. those using the
1801 certificate fingerprint for blacklists.
1803 1. Reject signatures with non zero unused bits.
1805 If the BIT STRING containing the signature has non zero unused bits reject
1806 the signature. All current signature algorithms require zero unused bits.
1808 2. Check certificate algorithm consistency.
1810 Check the AlgorithmIdentifier inside TBS matches the one in the
1811 certificate signature. NB: this will result in signature failure
1812 errors for some broken certificates.
1814 Thanks to Konrad Kraszewski from Google for reporting this issue.
1816 3. Check DSA/ECDSA signatures use DER.
1818 Reencode DSA/ECDSA signatures and compare with the original received
1819 signature. Return an error if there is a mismatch.
1821 This will reject various cases including garbage after signature
1822 (thanks to Antti Karjalainen and Tuomo Untinen from the Codenomicon CROSS
1823 program for discovering this case) and use of BER or invalid ASN.1 INTEGERs
1824 (negative or with leading zeroes).
1826 Further analysis was conducted and fixes were developed by Stephen Henson
1827 of the OpenSSL core team.
1832 *) Correct Bignum squaring. Bignum squaring (BN_sqr) may produce incorrect
1833 results on some platforms, including x86_64. This bug occurs at random
1834 with a very low probability, and is not known to be exploitable in any
1835 way, though its exact impact is difficult to determine. Thanks to Pieter
1836 Wuille (Blockstream) who reported this issue and also suggested an initial
1837 fix. Further analysis was conducted by the OpenSSL development team and
1838 Adam Langley of Google. The final fix was developed by Andy Polyakov of
1839 the OpenSSL core team.
1843 *) Do not resume sessions on the server if the negotiated protocol
1844 version does not match the session's version. Resuming with a different
1845 version, while not strictly forbidden by the RFC, is of questionable
1846 sanity and breaks all known clients.
1847 [David Benjamin, Emilia Käsper]
1849 *) Tighten handling of the ChangeCipherSpec (CCS) message: reject
1850 early CCS messages during renegotiation. (Note that because
1851 renegotiation is encrypted, this early CCS was not exploitable.)
1854 *) Tighten client-side session ticket handling during renegotiation:
1855 ensure that the client only accepts a session ticket if the server sends
1856 the extension anew in the ServerHello. Previously, a TLS client would
1857 reuse the old extension state and thus accept a session ticket if one was
1858 announced in the initial ServerHello.
1860 Similarly, ensure that the client requires a session ticket if one
1861 was advertised in the ServerHello. Previously, a TLS client would
1862 ignore a missing NewSessionTicket message.
1865 Changes between 1.0.1i and 1.0.1j [15 Oct 2014]
1867 *) SRTP Memory Leak.
1869 A flaw in the DTLS SRTP extension parsing code allows an attacker, who
1870 sends a carefully crafted handshake message, to cause OpenSSL to fail
1871 to free up to 64k of memory causing a memory leak. This could be
1872 exploited in a Denial Of Service attack. This issue affects OpenSSL
1873 1.0.1 server implementations for both SSL/TLS and DTLS regardless of
1874 whether SRTP is used or configured. Implementations of OpenSSL that
1875 have been compiled with OPENSSL_NO_SRTP defined are not affected.
1877 The fix was developed by the OpenSSL team.
1881 *) Session Ticket Memory Leak.
1883 When an OpenSSL SSL/TLS/DTLS server receives a session ticket the
1884 integrity of that ticket is first verified. In the event of a session
1885 ticket integrity check failing, OpenSSL will fail to free memory
1886 causing a memory leak. By sending a large number of invalid session
1887 tickets an attacker could exploit this issue in a Denial Of Service
1892 *) Build option no-ssl3 is incomplete.
1894 When OpenSSL is configured with "no-ssl3" as a build option, servers
1895 could accept and complete a SSL 3.0 handshake, and clients could be
1896 configured to send them.
1898 [Akamai and the OpenSSL team]
1900 *) Add support for TLS_FALLBACK_SCSV.
1901 Client applications doing fallback retries should call
1902 SSL_set_mode(s, SSL_MODE_SEND_FALLBACK_SCSV).
1904 [Adam Langley, Bodo Moeller]
1906 *) Add additional DigestInfo checks.
1908 Reencode DigestInto in DER and check against the original when
1909 verifying RSA signature: this will reject any improperly encoded
1910 DigestInfo structures.
1912 Note: this is a precautionary measure and no attacks are currently known.
1916 Changes between 1.0.1h and 1.0.1i [6 Aug 2014]
1918 *) Fix SRP buffer overrun vulnerability. Invalid parameters passed to the
1919 SRP code can be overrun an internal buffer. Add sanity check that
1920 g, A, B < N to SRP code.
1922 Thanks to Sean Devlin and Watson Ladd of Cryptography Services, NCC
1923 Group for discovering this issue.
1927 *) A flaw in the OpenSSL SSL/TLS server code causes the server to negotiate
1928 TLS 1.0 instead of higher protocol versions when the ClientHello message
1929 is badly fragmented. This allows a man-in-the-middle attacker to force a
1930 downgrade to TLS 1.0 even if both the server and the client support a
1931 higher protocol version, by modifying the client's TLS records.
1933 Thanks to David Benjamin and Adam Langley (Google) for discovering and
1934 researching this issue.
1938 *) OpenSSL DTLS clients enabling anonymous (EC)DH ciphersuites are subject
1939 to a denial of service attack. A malicious server can crash the client
1940 with a null pointer dereference (read) by specifying an anonymous (EC)DH
1941 ciphersuite and sending carefully crafted handshake messages.
1943 Thanks to Felix Gröbert (Google) for discovering and researching this
1948 *) By sending carefully crafted DTLS packets an attacker could cause openssl
1949 to leak memory. This can be exploited through a Denial of Service attack.
1950 Thanks to Adam Langley for discovering and researching this issue.
1954 *) An attacker can force openssl to consume large amounts of memory whilst
1955 processing DTLS handshake messages. This can be exploited through a
1956 Denial of Service attack.
1957 Thanks to Adam Langley for discovering and researching this issue.
1961 *) An attacker can force an error condition which causes openssl to crash
1962 whilst processing DTLS packets due to memory being freed twice. This
1963 can be exploited through a Denial of Service attack.
1964 Thanks to Adam Langley and Wan-Teh Chang for discovering and researching
1969 *) If a multithreaded client connects to a malicious server using a resumed
1970 session and the server sends an ec point format extension it could write
1971 up to 255 bytes to freed memory.
1973 Thanks to Gabor Tyukasz (LogMeIn Inc) for discovering and researching this
1978 *) A malicious server can crash an OpenSSL client with a null pointer
1979 dereference (read) by specifying an SRP ciphersuite even though it was not
1980 properly negotiated with the client. This can be exploited through a
1981 Denial of Service attack.
1983 Thanks to Joonas Kuorilehto and Riku Hietamäki (Codenomicon) for
1984 discovering and researching this issue.
1988 *) A flaw in OBJ_obj2txt may cause pretty printing functions such as
1989 X509_name_oneline, X509_name_print_ex et al. to leak some information
1990 from the stack. Applications may be affected if they echo pretty printing
1991 output to the attacker.
1993 Thanks to Ivan Fratric (Google) for discovering this issue.
1995 [Emilia Käsper, and Steve Henson]
1997 *) Fix ec_GFp_simple_points_make_affine (thus, EC_POINTs_mul etc.)
1998 for corner cases. (Certain input points at infinity could lead to
1999 bogus results, with non-infinity inputs mapped to infinity too.)
2002 Changes between 1.0.1g and 1.0.1h [5 Jun 2014]
2004 *) Fix for SSL/TLS MITM flaw. An attacker using a carefully crafted
2005 handshake can force the use of weak keying material in OpenSSL
2006 SSL/TLS clients and servers.
2008 Thanks to KIKUCHI Masashi (Lepidum Co. Ltd.) for discovering and
2009 researching this issue. (CVE-2014-0224)
2010 [KIKUCHI Masashi, Steve Henson]
2012 *) Fix DTLS recursion flaw. By sending an invalid DTLS handshake to an
2013 OpenSSL DTLS client the code can be made to recurse eventually crashing
2016 Thanks to Imre Rad (Search-Lab Ltd.) for discovering this issue.
2018 [Imre Rad, Steve Henson]
2020 *) Fix DTLS invalid fragment vulnerability. A buffer overrun attack can
2021 be triggered by sending invalid DTLS fragments to an OpenSSL DTLS
2022 client or server. This is potentially exploitable to run arbitrary
2023 code on a vulnerable client or server.
2025 Thanks to Jüri Aedla for reporting this issue. (CVE-2014-0195)
2026 [Jüri Aedla, Steve Henson]
2028 *) Fix bug in TLS code where clients enable anonymous ECDH ciphersuites
2029 are subject to a denial of service attack.
2031 Thanks to Felix Gröbert and Ivan Fratric at Google for discovering
2032 this issue. (CVE-2014-3470)
2033 [Felix Gröbert, Ivan Fratric, Steve Henson]
2035 *) Harmonize version and its documentation. -f flag is used to display
2037 [mancha <mancha1@zoho.com>]
2039 *) Fix eckey_priv_encode so it immediately returns an error upon a failure
2040 in i2d_ECPrivateKey.
2041 [mancha <mancha1@zoho.com>]
2043 *) Fix some double frees. These are not thought to be exploitable.
2044 [mancha <mancha1@zoho.com>]
2046 Changes between 1.0.1f and 1.0.1g [7 Apr 2014]
2048 *) A missing bounds check in the handling of the TLS heartbeat extension
2049 can be used to reveal up to 64k of memory to a connected client or
2052 Thanks for Neel Mehta of Google Security for discovering this bug and to
2053 Adam Langley <agl@chromium.org> and Bodo Moeller <bmoeller@acm.org> for
2054 preparing the fix (CVE-2014-0160)
2055 [Adam Langley, Bodo Moeller]
2057 *) Fix for the attack described in the paper "Recovering OpenSSL
2058 ECDSA Nonces Using the FLUSH+RELOAD Cache Side-channel Attack"
2059 by Yuval Yarom and Naomi Benger. Details can be obtained from:
2060 http://eprint.iacr.org/2014/140
2062 Thanks to Yuval Yarom and Naomi Benger for discovering this
2063 flaw and to Yuval Yarom for supplying a fix (CVE-2014-0076)
2064 [Yuval Yarom and Naomi Benger]
2066 *) TLS pad extension: draft-agl-tls-padding-03
2068 Workaround for the "TLS hang bug" (see FAQ and PR#2771): if the
2069 TLS client Hello record length value would otherwise be > 255 and
2070 less that 512 pad with a dummy extension containing zeroes so it
2071 is at least 512 bytes long.
2073 [Adam Langley, Steve Henson]
2075 Changes between 1.0.1e and 1.0.1f [6 Jan 2014]
2077 *) Fix for TLS record tampering bug. A carefully crafted invalid
2078 handshake could crash OpenSSL with a NULL pointer exception.
2079 Thanks to Anton Johansson for reporting this issues.
2082 *) Keep original DTLS digest and encryption contexts in retransmission
2083 structures so we can use the previous session parameters if they need
2084 to be resent. (CVE-2013-6450)
2087 *) Add option SSL_OP_SAFARI_ECDHE_ECDSA_BUG (part of SSL_OP_ALL) which
2088 avoids preferring ECDHE-ECDSA ciphers when the client appears to be
2089 Safari on OS X. Safari on OS X 10.8..10.8.3 advertises support for
2090 several ECDHE-ECDSA ciphers, but fails to negotiate them. The bug
2091 is fixed in OS X 10.8.4, but Apple have ruled out both hot fixing
2092 10.8..10.8.3 and forcing users to upgrade to 10.8.4 or newer.
2093 [Rob Stradling, Adam Langley]
2095 Changes between 1.0.1d and 1.0.1e [11 Feb 2013]
2097 *) Correct fix for CVE-2013-0169. The original didn't work on AES-NI
2098 supporting platforms or when small records were transferred.
2099 [Andy Polyakov, Steve Henson]
2101 Changes between 1.0.1c and 1.0.1d [5 Feb 2013]
2103 *) Make the decoding of SSLv3, TLS and DTLS CBC records constant time.
2105 This addresses the flaw in CBC record processing discovered by
2106 Nadhem Alfardan and Kenny Paterson. Details of this attack can be found
2107 at: http://www.isg.rhul.ac.uk/tls/
2109 Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
2110 Security Group at Royal Holloway, University of London
2111 (www.isg.rhul.ac.uk) for discovering this flaw and Adam Langley and
2112 Emilia Käsper for the initial patch.
2114 [Emilia Käsper, Adam Langley, Ben Laurie, Andy Polyakov, Steve Henson]
2116 *) Fix flaw in AESNI handling of TLS 1.2 and 1.1 records for CBC mode
2117 ciphersuites which can be exploited in a denial of service attack.
2118 Thanks go to and to Adam Langley <agl@chromium.org> for discovering
2119 and detecting this bug and to Wolfgang Ettlinger
2120 <wolfgang.ettlinger@gmail.com> for independently discovering this issue.
2124 *) Return an error when checking OCSP signatures when key is NULL.
2125 This fixes a DoS attack. (CVE-2013-0166)
2128 *) Make openssl verify return errors.
2129 [Chris Palmer <palmer@google.com> and Ben Laurie]
2131 *) Call OCSP Stapling callback after ciphersuite has been chosen, so
2132 the right response is stapled. Also change SSL_get_certificate()
2133 so it returns the certificate actually sent.
2134 See http://rt.openssl.org/Ticket/Display.html?id=2836.
2135 [Rob Stradling <rob.stradling@comodo.com>]
2137 *) Fix possible deadlock when decoding public keys.
2140 *) Don't use TLS 1.0 record version number in initial client hello
2144 Changes between 1.0.1b and 1.0.1c [10 May 2012]
2146 *) Sanity check record length before skipping explicit IV in TLS
2147 1.2, 1.1 and DTLS to fix DoS attack.
2149 Thanks to Codenomicon for discovering this issue using Fuzz-o-Matic
2150 fuzzing as a service testing platform.
2154 *) Initialise tkeylen properly when encrypting CMS messages.
2155 Thanks to Solar Designer of Openwall for reporting this issue.
2158 *) In FIPS mode don't try to use composite ciphers as they are not
2162 Changes between 1.0.1a and 1.0.1b [26 Apr 2012]
2164 *) OpenSSL 1.0.0 sets SSL_OP_ALL to 0x80000FFFL and OpenSSL 1.0.1 and
2165 1.0.1a set SSL_OP_NO_TLSv1_1 to 0x00000400L which would unfortunately
2166 mean any application compiled against OpenSSL 1.0.0 headers setting
2167 SSL_OP_ALL would also set SSL_OP_NO_TLSv1_1, unintentionally disablng
2168 TLS 1.1 also. Fix this by changing the value of SSL_OP_NO_TLSv1_1 to
2169 0x10000000L Any application which was previously compiled against
2170 OpenSSL 1.0.1 or 1.0.1a headers and which cares about SSL_OP_NO_TLSv1_1
2171 will need to be recompiled as a result. Letting be results in
2172 inability to disable specifically TLS 1.1 and in client context,
2173 in unlike event, limit maximum offered version to TLS 1.0 [see below].
2176 *) In order to ensure interoperabilty SSL_OP_NO_protocolX does not
2177 disable just protocol X, but all protocols above X *if* there are
2178 protocols *below* X still enabled. In more practical terms it means
2179 that if application wants to disable TLS1.0 in favor of TLS1.1 and
2180 above, it's not sufficient to pass SSL_OP_NO_TLSv1, one has to pass
2181 SSL_OP_NO_TLSv1|SSL_OP_NO_SSLv3|SSL_OP_NO_SSLv2. This applies to
2185 Changes between 1.0.1 and 1.0.1a [19 Apr 2012]
2187 *) Check for potentially exploitable overflows in asn1_d2i_read_bio
2188 BUF_mem_grow and BUF_mem_grow_clean. Refuse attempts to shrink buffer
2189 in CRYPTO_realloc_clean.
2191 Thanks to Tavis Ormandy, Google Security Team, for discovering this
2192 issue and to Adam Langley <agl@chromium.org> for fixing it.
2194 [Adam Langley (Google), Tavis Ormandy, Google Security Team]
2196 *) Don't allow TLS 1.2 SHA-256 ciphersuites in TLS 1.0, 1.1 connections.
2199 *) Workarounds for some broken servers that "hang" if a client hello
2200 record length exceeds 255 bytes.
2202 1. Do not use record version number > TLS 1.0 in initial client
2203 hello: some (but not all) hanging servers will now work.
2204 2. If we set OPENSSL_MAX_TLS1_2_CIPHER_LENGTH this will truncate
2205 the number of ciphers sent in the client hello. This should be
2206 set to an even number, such as 50, for example by passing:
2207 -DOPENSSL_MAX_TLS1_2_CIPHER_LENGTH=50 to config or Configure.
2208 Most broken servers should now work.
2209 3. If all else fails setting OPENSSL_NO_TLS1_2_CLIENT will disable
2210 TLS 1.2 client support entirely.
2213 *) Fix SEGV in Vector Permutation AES module observed in OpenSSH.
2216 Changes between 1.0.0h and 1.0.1 [14 Mar 2012]
2218 *) Add compatibility with old MDC2 signatures which use an ASN1 OCTET
2219 STRING form instead of a DigestInfo.
2222 *) The format used for MDC2 RSA signatures is inconsistent between EVP
2223 and the RSA_sign/RSA_verify functions. This was made more apparent when
2224 OpenSSL used RSA_sign/RSA_verify for some RSA signatures in particular
2225 those which went through EVP_PKEY_METHOD in 1.0.0 and later. Detect
2226 the correct format in RSA_verify so both forms transparently work.
2229 *) Some servers which support TLS 1.0 can choke if we initially indicate
2230 support for TLS 1.2 and later renegotiate using TLS 1.0 in the RSA
2231 encrypted premaster secret. As a workaround use the maximum permitted
2232 client version in client hello, this should keep such servers happy
2233 and still work with previous versions of OpenSSL.
2236 *) Add support for TLS/DTLS heartbeats.
2237 [Robin Seggelmann <seggelmann@fh-muenster.de>]
2239 *) Add support for SCTP.
2240 [Robin Seggelmann <seggelmann@fh-muenster.de>]
2242 *) Improved PRNG seeding for VOS.
2243 [Paul Green <Paul.Green@stratus.com>]
2245 *) Extensive assembler packs updates, most notably:
2247 - x86[_64]: AES-NI, PCLMULQDQ, RDRAND support;
2248 - x86[_64]: SSSE3 support (SHA1, vector-permutation AES);
2249 - x86_64: bit-sliced AES implementation;
2250 - ARM: NEON support, contemporary platforms optimizations;
2251 - s390x: z196 support;
2252 - *: GHASH and GF(2^m) multiplication implementations;
2256 *) Make TLS-SRP code conformant with RFC 5054 API cleanup
2257 (removal of unnecessary code)
2258 [Peter Sylvester <peter.sylvester@edelweb.fr>]
2260 *) Add TLS key material exporter from RFC 5705.
2263 *) Add DTLS-SRTP negotiation from RFC 5764.
2266 *) Add Next Protocol Negotiation,
2267 http://tools.ietf.org/html/draft-agl-tls-nextprotoneg-00. Can be
2268 disabled with a no-npn flag to config or Configure. Code donated
2270 [Adam Langley <agl@google.com> and Ben Laurie]
2272 *) Add optional 64-bit optimized implementations of elliptic curves NIST-P224,
2273 NIST-P256, NIST-P521, with constant-time single point multiplication on
2274 typical inputs. Compiler support for the nonstandard type __uint128_t is
2275 required to use this (present in gcc 4.4 and later, for 64-bit builds).
2276 Code made available under Apache License version 2.0.
2278 Specify "enable-ec_nistp_64_gcc_128" on the Configure (or config) command
2279 line to include this in your build of OpenSSL, and run "make depend" (or
2280 "make update"). This enables the following EC_METHODs:
2282 EC_GFp_nistp224_method()
2283 EC_GFp_nistp256_method()
2284 EC_GFp_nistp521_method()
2286 EC_GROUP_new_by_curve_name() will automatically use these (while
2287 EC_GROUP_new_curve_GFp() currently prefers the more flexible
2289 [Emilia Käsper, Adam Langley, Bodo Moeller (Google)]
2291 *) Use type ossl_ssize_t instad of ssize_t which isn't available on
2292 all platforms. Move ssize_t definition from e_os.h to the public
2293 header file e_os2.h as it now appears in public header file cms.h
2296 *) New -sigopt option to the ca, req and x509 utilities. Additional
2297 signature parameters can be passed using this option and in
2301 *) Add RSA PSS signing function. This will generate and set the
2302 appropriate AlgorithmIdentifiers for PSS based on those in the
2303 corresponding EVP_MD_CTX structure. No application support yet.
2306 *) Support for companion algorithm specific ASN1 signing routines.
2307 New function ASN1_item_sign_ctx() signs a pre-initialised
2308 EVP_MD_CTX structure and sets AlgorithmIdentifiers based on
2309 the appropriate parameters.
2312 *) Add new algorithm specific ASN1 verification initialisation function
2313 to EVP_PKEY_ASN1_METHOD: this is not in EVP_PKEY_METHOD since the ASN1
2314 handling will be the same no matter what EVP_PKEY_METHOD is used.
2315 Add a PSS handler to support verification of PSS signatures: checked
2316 against a number of sample certificates.
2319 *) Add signature printing for PSS. Add PSS OIDs.
2320 [Steve Henson, Martin Kaiser <lists@kaiser.cx>]
2322 *) Add algorithm specific signature printing. An individual ASN1 method
2323 can now print out signatures instead of the standard hex dump.
2325 More complex signatures (e.g. PSS) can print out more meaningful
2326 information. Include DSA version that prints out the signature
2330 *) Password based recipient info support for CMS library: implementing
2334 *) Split password based encryption into PBES2 and PBKDF2 functions. This
2335 neatly separates the code into cipher and PBE sections and is required
2336 for some algorithms that split PBES2 into separate pieces (such as
2337 password based CMS).
2340 *) Session-handling fixes:
2341 - Fix handling of connections that are resuming with a session ID,
2342 but also support Session Tickets.
2343 - Fix a bug that suppressed issuing of a new ticket if the client
2344 presented a ticket with an expired session.
2345 - Try to set the ticket lifetime hint to something reasonable.
2346 - Make tickets shorter by excluding irrelevant information.
2347 - On the client side, don't ignore renewed tickets.
2348 [Adam Langley, Bodo Moeller (Google)]
2350 *) Fix PSK session representation.
2353 *) Add RC4-MD5 and AESNI-SHA1 "stitched" implementations.
2355 This work was sponsored by Intel.
2358 *) Add GCM support to TLS library. Some custom code is needed to split
2359 the IV between the fixed (from PRF) and explicit (from TLS record)
2360 portions. This adds all GCM ciphersuites supported by RFC5288 and
2361 RFC5289. Generalise some AES* cipherstrings to include GCM and
2362 add a special AESGCM string for GCM only.
2365 *) Expand range of ctrls for AES GCM. Permit setting invocation
2366 field on decrypt and retrieval of invocation field only on encrypt.
2369 *) Add HMAC ECC ciphersuites from RFC5289. Include SHA384 PRF support.
2370 As required by RFC5289 these ciphersuites cannot be used if for
2371 versions of TLS earlier than 1.2.
2374 *) For FIPS capable OpenSSL interpret a NULL default public key method
2375 as unset and return the appropriate default but do *not* set the default.
2376 This means we can return the appropriate method in applications that
2377 switch between FIPS and non-FIPS modes.
2380 *) Redirect HMAC and CMAC operations to FIPS module in FIPS mode. If an
2381 ENGINE is used then we cannot handle that in the FIPS module so we
2382 keep original code iff non-FIPS operations are allowed.
2385 *) Add -attime option to openssl utilities.
2386 [Peter Eckersley <pde@eff.org>, Ben Laurie and Steve Henson]
2388 *) Redirect DSA and DH operations to FIPS module in FIPS mode.
2391 *) Redirect ECDSA and ECDH operations to FIPS module in FIPS mode. Also use
2392 FIPS EC methods unconditionally for now.
2395 *) New build option no-ec2m to disable characteristic 2 code.
2398 *) Backport libcrypto audit of return value checking from 1.1.0-dev; not
2399 all cases can be covered as some introduce binary incompatibilities.
2402 *) Redirect RSA operations to FIPS module including keygen,
2403 encrypt, decrypt, sign and verify. Block use of non FIPS RSA methods.
2406 *) Add similar low level API blocking to ciphers.
2409 *) Low level digest APIs are not approved in FIPS mode: any attempt
2410 to use these will cause a fatal error. Applications that *really* want
2411 to use them can use the private_* version instead.
2414 *) Redirect cipher operations to FIPS module for FIPS builds.
2417 *) Redirect digest operations to FIPS module for FIPS builds.
2420 *) Update build system to add "fips" flag which will link in fipscanister.o
2421 for static and shared library builds embedding a signature if needed.
2424 *) Output TLS supported curves in preference order instead of numerical
2425 order. This is currently hardcoded for the highest order curves first.
2426 This should be configurable so applications can judge speed vs strength.
2429 *) Add TLS v1.2 server support for client authentication.
2432 *) Add support for FIPS mode in ssl library: disable SSLv3, non-FIPS ciphers
2436 *) Functions FIPS_mode_set() and FIPS_mode() which call the underlying
2437 FIPS modules versions.
2440 *) Add TLS v1.2 client side support for client authentication. Keep cache
2441 of handshake records longer as we don't know the hash algorithm to use
2442 until after the certificate request message is received.
2445 *) Initial TLS v1.2 client support. Add a default signature algorithms
2446 extension including all the algorithms we support. Parse new signature
2447 format in client key exchange. Relax some ECC signing restrictions for
2448 TLS v1.2 as indicated in RFC5246.
2451 *) Add server support for TLS v1.2 signature algorithms extension. Switch
2452 to new signature format when needed using client digest preference.
2453 All server ciphersuites should now work correctly in TLS v1.2. No client
2454 support yet and no support for client certificates.
2457 *) Initial TLS v1.2 support. Add new SHA256 digest to ssl code, switch
2458 to SHA256 for PRF when using TLS v1.2 and later. Add new SHA256 based
2459 ciphersuites. At present only RSA key exchange ciphersuites work with
2460 TLS v1.2. Add new option for TLS v1.2 replacing the old and obsolete
2461 SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
2462 and version checking.
2465 *) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
2466 with this defined it will not be affected by any changes to ssl internal
2467 structures. Add several utility functions to allow openssl application
2468 to work with OPENSSL_NO_SSL_INTERN defined.
2472 [Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
2474 *) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
2477 *) Permit abbreviated handshakes when renegotiating using the function
2478 SSL_renegotiate_abbreviated().
2479 [Robin Seggelmann <seggelmann@fh-muenster.de>]
2481 *) Add call to ENGINE_register_all_complete() to
2482 ENGINE_load_builtin_engines(), so some implementations get used
2483 automatically instead of needing explicit application support.
2486 *) Add support for TLS key exporter as described in RFC5705.
2487 [Robin Seggelmann <seggelmann@fh-muenster.de>, Steve Henson]
2489 *) Initial TLSv1.1 support. Since TLSv1.1 is very similar to TLS v1.0 only
2490 a few changes are required:
2492 Add SSL_OP_NO_TLSv1_1 flag.
2493 Add TLSv1_1 methods.
2494 Update version checking logic to handle version 1.1.
2495 Add explicit IV handling (ported from DTLS code).
2496 Add command line options to s_client/s_server.
2499 Changes between 1.0.0g and 1.0.0h [12 Mar 2012]
2501 *) Fix MMA (Bleichenbacher's attack on PKCS #1 v1.5 RSA padding) weakness
2502 in CMS and PKCS7 code. When RSA decryption fails use a random key for
2503 content decryption and always return the same error. Note: this attack
2504 needs on average 2^20 messages so it only affects automated senders. The
2505 old behaviour can be reenabled in the CMS code by setting the
2506 CMS_DEBUG_DECRYPT flag: this is useful for debugging and testing where
2507 an MMA defence is not necessary.
2508 Thanks to Ivan Nestlerode <inestlerode@us.ibm.com> for discovering
2509 this issue. (CVE-2012-0884)
2512 *) Fix CVE-2011-4619: make sure we really are receiving a
2513 client hello before rejecting multiple SGC restarts. Thanks to
2514 Ivan Nestlerode <inestlerode@us.ibm.com> for discovering this bug.
2517 Changes between 1.0.0f and 1.0.0g [18 Jan 2012]
2519 *) Fix for DTLS DoS issue introduced by fix for CVE-2011-4109.
2520 Thanks to Antonio Martin, Enterprise Secure Access Research and
2521 Development, Cisco Systems, Inc. for discovering this bug and
2522 preparing a fix. (CVE-2012-0050)
2525 Changes between 1.0.0e and 1.0.0f [4 Jan 2012]
2527 *) Nadhem Alfardan and Kenny Paterson have discovered an extension
2528 of the Vaudenay padding oracle attack on CBC mode encryption
2529 which enables an efficient plaintext recovery attack against
2530 the OpenSSL implementation of DTLS. Their attack exploits timing
2531 differences arising during decryption processing. A research
2532 paper describing this attack can be found at:
2533 http://www.isg.rhul.ac.uk/~kp/dtls.pdf
2534 Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
2535 Security Group at Royal Holloway, University of London
2536 (www.isg.rhul.ac.uk) for discovering this flaw and to Robin Seggelmann
2537 <seggelmann@fh-muenster.de> and Michael Tuexen <tuexen@fh-muenster.de>
2538 for preparing the fix. (CVE-2011-4108)
2539 [Robin Seggelmann, Michael Tuexen]
2541 *) Clear bytes used for block padding of SSL 3.0 records.
2543 [Adam Langley (Google)]
2545 *) Only allow one SGC handshake restart for SSL/TLS. Thanks to George
2546 Kadianakis <desnacked@gmail.com> for discovering this issue and
2547 Adam Langley for preparing the fix. (CVE-2011-4619)
2548 [Adam Langley (Google)]
2550 *) Check parameters are not NULL in GOST ENGINE. (CVE-2012-0027)
2551 [Andrey Kulikov <amdeich@gmail.com>]
2553 *) Prevent malformed RFC3779 data triggering an assertion failure.
2554 Thanks to Andrew Chi, BBN Technologies, for discovering the flaw
2555 and Rob Austein <sra@hactrn.net> for fixing it. (CVE-2011-4577)
2556 [Rob Austein <sra@hactrn.net>]
2558 *) Improved PRNG seeding for VOS.
2559 [Paul Green <Paul.Green@stratus.com>]
2561 *) Fix ssl_ciph.c set-up race.
2562 [Adam Langley (Google)]
2564 *) Fix spurious failures in ecdsatest.c.
2565 [Emilia Käsper (Google)]
2567 *) Fix the BIO_f_buffer() implementation (which was mixing different
2568 interpretations of the '..._len' fields).
2569 [Adam Langley (Google)]
2571 *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
2572 BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
2573 threads won't reuse the same blinding coefficients.
2575 This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
2576 lock to call BN_BLINDING_invert_ex, and avoids one use of
2577 BN_BLINDING_update for each BN_BLINDING structure (previously,
2578 the last update always remained unused).
2579 [Emilia Käsper (Google)]
2581 *) In ssl3_clear, preserve s3->init_extra along with s3->rbuf.
2582 [Bob Buckholz (Google)]
2584 Changes between 1.0.0d and 1.0.0e [6 Sep 2011]
2586 *) Fix bug where CRLs with nextUpdate in the past are sometimes accepted
2587 by initialising X509_STORE_CTX properly. (CVE-2011-3207)
2588 [Kaspar Brand <ossl@velox.ch>]
2590 *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
2591 for multi-threaded use of ECDH. (CVE-2011-3210)
2592 [Adam Langley (Google)]
2594 *) Fix x509_name_ex_d2i memory leak on bad inputs.
2597 *) Remove hard coded ecdsaWithSHA1 signature tests in ssl code and check
2598 signature public key algorithm by using OID xref utilities instead.
2599 Before this you could only use some ECC ciphersuites with SHA1 only.
2602 *) Add protection against ECDSA timing attacks as mentioned in the paper
2603 by Billy Bob Brumley and Nicola Tuveri, see:
2605 http://eprint.iacr.org/2011/232.pdf
2607 [Billy Bob Brumley and Nicola Tuveri]
2609 Changes between 1.0.0c and 1.0.0d [8 Feb 2011]
2611 *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
2612 [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
2614 *) Fix bug in string printing code: if *any* escaping is enabled we must
2615 escape the escape character (backslash) or the resulting string is
2619 Changes between 1.0.0b and 1.0.0c [2 Dec 2010]
2621 *) Disable code workaround for ancient and obsolete Netscape browsers
2622 and servers: an attacker can use it in a ciphersuite downgrade attack.
2623 Thanks to Martin Rex for discovering this bug. CVE-2010-4180
2626 *) Fixed J-PAKE implementation error, originally discovered by
2627 Sebastien Martini, further info and confirmation from Stefan
2628 Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
2631 Changes between 1.0.0a and 1.0.0b [16 Nov 2010]
2633 *) Fix extension code to avoid race conditions which can result in a buffer
2634 overrun vulnerability: resumed sessions must not be modified as they can
2635 be shared by multiple threads. CVE-2010-3864
2638 *) Fix WIN32 build system to correctly link an ENGINE directory into
2642 Changes between 1.0.0 and 1.0.0a [01 Jun 2010]
2644 *) Check return value of int_rsa_verify in pkey_rsa_verifyrecover
2646 [Steve Henson, Peter-Michael Hager <hager@dortmund.net>]
2648 Changes between 0.9.8n and 1.0.0 [29 Mar 2010]
2650 *) Add "missing" function EVP_CIPHER_CTX_copy(). This copies a cipher
2651 context. The operation can be customised via the ctrl mechanism in
2652 case ENGINEs want to include additional functionality.
2655 *) Tolerate yet another broken PKCS#8 key format: private key value negative.
2658 *) Add new -subject_hash_old and -issuer_hash_old options to x509 utility to
2659 output hashes compatible with older versions of OpenSSL.
2660 [Willy Weisz <weisz@vcpc.univie.ac.at>]
2662 *) Fix compression algorithm handling: if resuming a session use the
2663 compression algorithm of the resumed session instead of determining
2664 it from client hello again. Don't allow server to change algorithm.
2667 *) Add load_crls() function to apps tidying load_certs() too. Add option
2668 to verify utility to allow additional CRLs to be included.
2671 *) Update OCSP request code to permit adding custom headers to the request:
2672 some responders need this.
2675 *) The function EVP_PKEY_sign() returns <=0 on error: check return code
2677 [Julia Lawall <julia@diku.dk>]
2679 *) Update verify callback code in apps/s_cb.c and apps/verify.c, it
2680 needlessly dereferenced structures, used obsolete functions and
2681 didn't handle all updated verify codes correctly.
2684 *) Disable MD2 in the default configuration.
2687 *) In BIO_pop() and BIO_push() use the ctrl argument (which was NULL) to
2688 indicate the initial BIO being pushed or popped. This makes it possible
2689 to determine whether the BIO is the one explicitly called or as a result
2690 of the ctrl being passed down the chain. Fix BIO_pop() and SSL BIOs so
2691 it handles reference counts correctly and doesn't zero out the I/O bio
2692 when it is not being explicitly popped. WARNING: applications which
2693 included workarounds for the old buggy behaviour will need to be modified
2694 or they could free up already freed BIOs.
2697 *) Extend the uni2asc/asc2uni => OPENSSL_uni2asc/OPENSSL_asc2uni
2698 renaming to all platforms (within the 0.9.8 branch, this was
2699 done conditionally on Netware platforms to avoid a name clash).
2700 [Guenter <lists@gknw.net>]
2702 *) Add ECDHE and PSK support to DTLS.
2703 [Michael Tuexen <tuexen@fh-muenster.de>]
2705 *) Add CHECKED_STACK_OF macro to safestack.h, otherwise safestack can't
2709 *) Add "missing" function EVP_MD_flags() (without this the only way to
2710 retrieve a digest flags is by accessing the structure directly. Update
2711 EVP_MD_do_all*() and EVP_CIPHER_do_all*() to include the name a digest
2712 or cipher is registered as in the "from" argument. Print out all
2713 registered digests in the dgst usage message instead of manually
2714 attempting to work them out.
2717 *) If no SSLv2 ciphers are used don't use an SSLv2 compatible client hello:
2718 this allows the use of compression and extensions. Change default cipher
2719 string to remove SSLv2 ciphersuites. This effectively avoids ancient SSLv2
2720 by default unless an application cipher string requests it.
2723 *) Alter match criteria in PKCS12_parse(). It used to try to use local
2724 key ids to find matching certificates and keys but some PKCS#12 files
2725 don't follow the (somewhat unwritten) rules and this strategy fails.
2726 Now just gather all certificates together and the first private key
2727 then look for the first certificate that matches the key.
2730 *) Support use of registered digest and cipher names for dgst and cipher
2731 commands instead of having to add each one as a special case. So now
2738 openssl dgst -sha256 foo
2740 and this works for ENGINE based algorithms too.
2744 *) Update Gost ENGINE to support parameter files.
2745 [Victor B. Wagner <vitus@cryptocom.ru>]
2747 *) Support GeneralizedTime in ca utility.
2748 [Oliver Martin <oliver@volatilevoid.net>, Steve Henson]
2750 *) Enhance the hash format used for certificate directory links. The new
2751 form uses the canonical encoding (meaning equivalent names will work
2752 even if they aren't identical) and uses SHA1 instead of MD5. This form
2753 is incompatible with the older format and as a result c_rehash should
2754 be used to rebuild symbolic links.
2757 *) Make PKCS#8 the default write format for private keys, replacing the
2758 traditional format. This form is standardised, more secure and doesn't
2759 include an implicit MD5 dependency.
2762 *) Add a $gcc_devteam_warn option to Configure. The idea is that any code
2763 committed to OpenSSL should pass this lot as a minimum.
2766 *) Add session ticket override functionality for use by EAP-FAST.
2767 [Jouni Malinen <j@w1.fi>]
2769 *) Modify HMAC functions to return a value. Since these can be implemented
2770 in an ENGINE errors can occur.
2773 *) Type-checked OBJ_bsearch_ex.
2776 *) Type-checked OBJ_bsearch. Also some constification necessitated
2777 by type-checking. Still to come: TXT_DB, bsearch(?),
2778 OBJ_bsearch_ex, qsort, CRYPTO_EX_DATA, ASN1_VALUE, ASN1_STRING,
2782 *) New function OPENSSL_gmtime_adj() to add a specific number of days and
2783 seconds to a tm structure directly, instead of going through OS
2784 specific date routines. This avoids any issues with OS routines such
2785 as the year 2038 bug. New *_adj() functions for ASN1 time structures
2786 and X509_time_adj_ex() to cover the extended range. The existing
2787 X509_time_adj() is still usable and will no longer have any date issues.
2790 *) Delta CRL support. New use deltas option which will attempt to locate
2791 and search any appropriate delta CRLs available.
2793 This work was sponsored by Google.
2796 *) Support for CRLs partitioned by reason code. Reorganise CRL processing
2797 code and add additional score elements. Validate alternate CRL paths
2798 as part of the CRL checking and indicate a new error "CRL path validation
2799 error" in this case. Applications wanting additional details can use
2800 the verify callback and check the new "parent" field. If this is not
2801 NULL CRL path validation is taking place. Existing applications wont
2802 see this because it requires extended CRL support which is off by
2805 This work was sponsored by Google.
2808 *) Support for freshest CRL extension.
2810 This work was sponsored by Google.
2813 *) Initial indirect CRL support. Currently only supported in the CRLs
2814 passed directly and not via lookup. Process certificate issuer
2815 CRL entry extension and lookup CRL entries by bother issuer name
2816 and serial number. Check and process CRL issuer entry in IDP extension.
2818 This work was sponsored by Google.
2821 *) Add support for distinct certificate and CRL paths. The CRL issuer
2822 certificate is validated separately in this case. Only enabled if
2823 an extended CRL support flag is set: this flag will enable additional
2824 CRL functionality in future.
2826 This work was sponsored by Google.
2829 *) Add support for policy mappings extension.
2831 This work was sponsored by Google.
2834 *) Fixes to pathlength constraint, self issued certificate handling,
2835 policy processing to align with RFC3280 and PKITS tests.
2837 This work was sponsored by Google.
2840 *) Support for name constraints certificate extension. DN, email, DNS
2841 and URI types are currently supported.
2843 This work was sponsored by Google.
2846 *) To cater for systems that provide a pointer-based thread ID rather
2847 than numeric, deprecate the current numeric thread ID mechanism and
2848 replace it with a structure and associated callback type. This
2849 mechanism allows a numeric "hash" to be extracted from a thread ID in
2850 either case, and on platforms where pointers are larger than 'long',
2851 mixing is done to help ensure the numeric 'hash' is usable even if it
2852 can't be guaranteed unique. The default mechanism is to use "&errno"
2853 as a pointer-based thread ID to distinguish between threads.
2855 Applications that want to provide their own thread IDs should now use
2856 CRYPTO_THREADID_set_callback() to register a callback that will call
2857 either CRYPTO_THREADID_set_numeric() or CRYPTO_THREADID_set_pointer().
2859 Note that ERR_remove_state() is now deprecated, because it is tied
2860 to the assumption that thread IDs are numeric. ERR_remove_state(0)
2861 to free the current thread's error state should be replaced by
2862 ERR_remove_thread_state(NULL).
2864 (This new approach replaces the functions CRYPTO_set_idptr_callback(),
2865 CRYPTO_get_idptr_callback(), and CRYPTO_thread_idptr() that existed in
2866 OpenSSL 0.9.9-dev between June 2006 and August 2008. Also, if an
2867 application was previously providing a numeric thread callback that
2868 was inappropriate for distinguishing threads, then uniqueness might
2869 have been obtained with &errno that happened immediately in the
2870 intermediate development versions of OpenSSL; this is no longer the
2871 case, the numeric thread callback will now override the automatic use
2873 [Geoff Thorpe, with help from Bodo Moeller]
2875 *) Initial support for different CRL issuing certificates. This covers a
2876 simple case where the self issued certificates in the chain exist and
2877 the real CRL issuer is higher in the existing chain.
2879 This work was sponsored by Google.
2882 *) Removed effectively defunct crypto/store from the build.
2885 *) Revamp of STACK to provide stronger type-checking. Still to come:
2886 TXT_DB, bsearch(?), OBJ_bsearch, qsort, CRYPTO_EX_DATA, ASN1_VALUE,
2887 ASN1_STRING, CONF_VALUE.
2890 *) Add a new SSL_MODE_RELEASE_BUFFERS mode flag to release unused buffer
2891 RAM on SSL connections. This option can save about 34k per idle SSL.
2894 *) Revamp of LHASH to provide stronger type-checking. Still to come:
2895 STACK, TXT_DB, bsearch, qsort.
2898 *) Initial support for Cryptographic Message Syntax (aka CMS) based
2899 on RFC3850, RFC3851 and RFC3852. New cms directory and cms utility,
2900 support for data, signedData, compressedData, digestedData and
2901 encryptedData, envelopedData types included. Scripts to check against
2902 RFC4134 examples draft and interop and consistency checks of many
2903 content types and variants.
2906 *) Add options to enc utility to support use of zlib compression BIO.
2909 *) Extend mk1mf to support importing of options and assembly language
2910 files from Configure script, currently only included in VC-WIN32.
2911 The assembly language rules can now optionally generate the source
2912 files from the associated perl scripts.
2915 *) Implement remaining functionality needed to support GOST ciphersuites.
2916 Interop testing has been performed using CryptoPro implementations.
2917 [Victor B. Wagner <vitus@cryptocom.ru>]
2919 *) s390x assembler pack.
2922 *) ARMv4 assembler pack. ARMv4 refers to v4 and later ISA, not CPU
2926 *) Implement Opaque PRF Input TLS extension as specified in
2927 draft-rescorla-tls-opaque-prf-input-00.txt. Since this is not an
2928 official specification yet and no extension type assignment by
2929 IANA exists, this extension (for now) will have to be explicitly
2930 enabled when building OpenSSL by providing the extension number
2931 to use. For example, specify an option
2933 -DTLSEXT_TYPE_opaque_prf_input=0x9527
2935 to the "config" or "Configure" script to enable the extension,
2936 assuming extension number 0x9527 (which is a completely arbitrary
2937 and unofficial assignment based on the MD5 hash of the Internet
2938 Draft). Note that by doing so, you potentially lose
2939 interoperability with other TLS implementations since these might
2940 be using the same extension number for other purposes.
2942 SSL_set_tlsext_opaque_prf_input(ssl, src, len) is used to set the
2943 opaque PRF input value to use in the handshake. This will create
2944 an interal copy of the length-'len' string at 'src', and will
2945 return non-zero for success.
2947 To get more control and flexibility, provide a callback function
2950 SSL_CTX_set_tlsext_opaque_prf_input_callback(ctx, cb)
2951 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg(ctx, arg)
2955 int (*cb)(SSL *, void *peerinput, size_t len, void *arg);
2958 Callback function 'cb' will be called in handshakes, and is
2959 expected to use SSL_set_tlsext_opaque_prf_input() as appropriate.
2960 Argument 'arg' is for application purposes (the value as given to
2961 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg() will directly
2962 be provided to the callback function). The callback function
2963 has to return non-zero to report success: usually 1 to use opaque
2964 PRF input just if possible, or 2 to enforce use of the opaque PRF
2965 input. In the latter case, the library will abort the handshake
2966 if opaque PRF input is not successfully negotiated.
2968 Arguments 'peerinput' and 'len' given to the callback function
2969 will always be NULL and 0 in the case of a client. A server will
2970 see the client's opaque PRF input through these variables if
2971 available (NULL and 0 otherwise). Note that if the server
2972 provides an opaque PRF input, the length must be the same as the
2973 length of the client's opaque PRF input.
2975 Note that the callback function will only be called when creating
2976 a new session (session resumption can resume whatever was
2977 previously negotiated), and will not be called in SSL 2.0
2978 handshakes; thus, SSL_CTX_set_options(ctx, SSL_OP_NO_SSLv2) or
2979 SSL_set_options(ssl, SSL_OP_NO_SSLv2) is especially recommended
2980 for applications that need to enforce opaque PRF input.
2984 *) Update ssl code to support digests other than SHA1+MD5 for handshake
2987 [Victor B. Wagner <vitus@cryptocom.ru>]
2989 *) Add RFC4507 support to OpenSSL. This includes the corrections in
2990 RFC4507bis. The encrypted ticket format is an encrypted encoded
2991 SSL_SESSION structure, that way new session features are automatically
2994 If a client application caches session in an SSL_SESSION structure
2995 support is transparent because tickets are now stored in the encoded
2998 The SSL_CTX structure automatically generates keys for ticket
2999 protection in servers so again support should be possible
3000 with no application modification.
3002 If a client or server wishes to disable RFC4507 support then the option
3003 SSL_OP_NO_TICKET can be set.
3005 Add a TLS extension debugging callback to allow the contents of any client
3006 or server extensions to be examined.
3008 This work was sponsored by Google.
3011 *) Final changes to avoid use of pointer pointer casts in OpenSSL.
3012 OpenSSL should now compile cleanly on gcc 4.2
3013 [Peter Hartley <pdh@utter.chaos.org.uk>, Steve Henson]
3015 *) Update SSL library to use new EVP_PKEY MAC API. Include generic MAC
3016 support including streaming MAC support: this is required for GOST
3017 ciphersuite support.
3018 [Victor B. Wagner <vitus@cryptocom.ru>, Steve Henson]
3020 *) Add option -stream to use PKCS#7 streaming in smime utility. New
3021 function i2d_PKCS7_bio_stream() and PEM_write_PKCS7_bio_stream()
3022 to output in BER and PEM format.
3025 *) Experimental support for use of HMAC via EVP_PKEY interface. This
3026 allows HMAC to be handled via the EVP_DigestSign*() interface. The
3027 EVP_PKEY "key" in this case is the HMAC key, potentially allowing
3028 ENGINE support for HMAC keys which are unextractable. New -mac and
3029 -macopt options to dgst utility.
3032 *) New option -sigopt to dgst utility. Update dgst to use
3033 EVP_Digest{Sign,Verify}*. These two changes make it possible to use
3034 alternative signing parameters such as X9.31 or PSS in the dgst
3038 *) Change ssl_cipher_apply_rule(), the internal function that does
3039 the work each time a ciphersuite string requests enabling
3040 ("foo+bar"), moving ("+foo+bar"), disabling ("-foo+bar", or
3041 removing ("!foo+bar") a class of ciphersuites: Now it maintains
3042 the order of disabled ciphersuites such that those ciphersuites
3043 that most recently went from enabled to disabled not only stay
3044 in order with respect to each other, but also have higher priority
3045 than other disabled ciphersuites the next time ciphersuites are
3048 This means that you can now say, e.g., "PSK:-PSK:HIGH" to enable
3049 the same ciphersuites as with "HIGH" alone, but in a specific
3050 order where the PSK ciphersuites come first (since they are the
3051 most recently disabled ciphersuites when "HIGH" is parsed).
3053 Also, change ssl_create_cipher_list() (using this new
3054 funcionality) such that between otherwise identical
3055 cihpersuites, ephemeral ECDH is preferred over ephemeral DH in
3059 *) Change ssl_create_cipher_list() so that it automatically
3060 arranges the ciphersuites in reasonable order before starting
3061 to process the rule string. Thus, the definition for "DEFAULT"
3062 (SSL_DEFAULT_CIPHER_LIST) now is just "ALL:!aNULL:!eNULL", but
3063 remains equivalent to "AES:ALL:!aNULL:!eNULL:+aECDH:+kRSA:+RC4:@STRENGTH".
3064 This makes it much easier to arrive at a reasonable default order
3065 in applications for which anonymous ciphers are OK (meaning
3066 that you can't actually use DEFAULT).
3067 [Bodo Moeller; suggested by Victor Duchovni]
3069 *) Split the SSL/TLS algorithm mask (as used for ciphersuite string
3070 processing) into multiple integers instead of setting
3071 "SSL_MKEY_MASK" bits, "SSL_AUTH_MASK" bits, "SSL_ENC_MASK",
3072 "SSL_MAC_MASK", and "SSL_SSL_MASK" bits all in a single integer.
3073 (These masks as well as the individual bit definitions are hidden
3074 away into the non-exported interface ssl/ssl_locl.h, so this
3075 change to the definition of the SSL_CIPHER structure shouldn't
3076 affect applications.) This give us more bits for each of these
3077 categories, so there is no longer a need to coagulate AES128 and
3078 AES256 into a single algorithm bit, and to coagulate Camellia128
3079 and Camellia256 into a single algorithm bit, which has led to all
3082 Thus, among other things, the kludge introduced in 0.9.7m and
3083 0.9.8e for masking out AES256 independently of AES128 or masking
3084 out Camellia256 independently of AES256 is not needed here in 0.9.9.
3086 With the change, we also introduce new ciphersuite aliases that
3087 so far were missing: "AES128", "AES256", "CAMELLIA128", and
3091 *) Add support for dsa-with-SHA224 and dsa-with-SHA256.
3092 Use the leftmost N bytes of the signature input if the input is
3093 larger than the prime q (with N being the size in bytes of q).
3096 *) Very *very* experimental PKCS#7 streaming encoder support. Nothing uses
3097 it yet and it is largely untested.
3100 *) Add support for the ecdsa-with-SHA224/256/384/512 signature types.
3103 *) Initial incomplete changes to avoid need for function casts in OpenSSL
3104 some compilers (gcc 4.2 and later) reject their use. Safestack is
3105 reimplemented. Update ASN1 to avoid use of legacy functions.
3108 *) Win32/64 targets are linked with Winsock2.
3111 *) Add an X509_CRL_METHOD structure to allow CRL processing to be redirected
3112 to external functions. This can be used to increase CRL handling
3113 efficiency especially when CRLs are very large by (for example) storing
3114 the CRL revoked certificates in a database.
3117 *) Overhaul of by_dir code. Add support for dynamic loading of CRLs so
3118 new CRLs added to a directory can be used. New command line option
3119 -verify_return_error to s_client and s_server. This causes real errors
3120 to be returned by the verify callback instead of carrying on no matter
3121 what. This reflects the way a "real world" verify callback would behave.
3124 *) GOST engine, supporting several GOST algorithms and public key formats.
3125 Kindly donated by Cryptocom.
3128 *) Partial support for Issuing Distribution Point CRL extension. CRLs
3129 partitioned by DP are handled but no indirect CRL or reason partitioning
3130 (yet). Complete overhaul of CRL handling: now the most suitable CRL is
3131 selected via a scoring technique which handles IDP and AKID in CRLs.
3134 *) New X509_STORE_CTX callbacks lookup_crls() and lookup_certs() which
3135 will ultimately be used for all verify operations: this will remove the
3136 X509_STORE dependency on certificate verification and allow alternative
3137 lookup methods. X509_STORE based implementations of these two callbacks.
3140 *) Allow multiple CRLs to exist in an X509_STORE with matching issuer names.
3141 Modify get_crl() to find a valid (unexpired) CRL if possible.
3144 *) New function X509_CRL_match() to check if two CRLs are identical. Normally
3145 this would be called X509_CRL_cmp() but that name is already used by
3146 a function that just compares CRL issuer names. Cache several CRL
3147 extensions in X509_CRL structure and cache CRLDP in X509.
3150 *) Store a "canonical" representation of X509_NAME structure (ASN1 Name)
3151 this maps equivalent X509_NAME structures into a consistent structure.
3152 Name comparison can then be performed rapidly using memcmp().
3155 *) Non-blocking OCSP request processing. Add -timeout option to ocsp
3159 *) Allow digests to supply their own micalg string for S/MIME type using
3160 the ctrl EVP_MD_CTRL_MICALG.
3163 *) During PKCS7 signing pass the PKCS7 SignerInfo structure to the
3164 EVP_PKEY_METHOD before and after signing via the EVP_PKEY_CTRL_PKCS7_SIGN
3165 ctrl. It can then customise the structure before and/or after signing
3169 *) New function OBJ_add_sigid() to allow application defined signature OIDs
3170 to be added to OpenSSLs internal tables. New function OBJ_sigid_free()
3171 to free up any added signature OIDs.
3174 *) New functions EVP_CIPHER_do_all(), EVP_CIPHER_do_all_sorted(),
3175 EVP_MD_do_all() and EVP_MD_do_all_sorted() to enumerate internal
3176 digest and cipher tables. New options added to openssl utility:
3177 list-message-digest-algorithms and list-cipher-algorithms.
3180 *) Change the array representation of binary polynomials: the list
3181 of degrees of non-zero coefficients is now terminated with -1.
3182 Previously it was terminated with 0, which was also part of the
3183 value; thus, the array representation was not applicable to
3184 polynomials where t^0 has coefficient zero. This change makes
3185 the array representation useful in a more general context.
3188 *) Various modifications and fixes to SSL/TLS cipher string
3189 handling. For ECC, the code now distinguishes between fixed ECDH
3190 with RSA certificates on the one hand and with ECDSA certificates
3191 on the other hand, since these are separate ciphersuites. The
3192 unused code for Fortezza ciphersuites has been removed.
3194 For consistency with EDH, ephemeral ECDH is now called "EECDH"
3195 (not "ECDHE"). For consistency with the code for DH
3196 certificates, use of ECDH certificates is now considered ECDH
3197 authentication, not RSA or ECDSA authentication (the latter is
3198 merely the CA's signing algorithm and not actively used in the
3201 The temporary ciphersuite alias "ECCdraft" is no longer
3202 available, and ECC ciphersuites are no longer excluded from "ALL"
3203 and "DEFAULT". The following aliases now exist for RFC 4492
3204 ciphersuites, most of these by analogy with the DH case:
3206 kECDHr - ECDH cert, signed with RSA
3207 kECDHe - ECDH cert, signed with ECDSA
3208 kECDH - ECDH cert (signed with either RSA or ECDSA)
3209 kEECDH - ephemeral ECDH
3210 ECDH - ECDH cert or ephemeral ECDH
3216 AECDH - anonymous ECDH
3217 EECDH - non-anonymous ephemeral ECDH (equivalent to "kEECDH:-AECDH")
3221 *) Add additional S/MIME capabilities for AES and GOST ciphers if supported.
3222 Use correct micalg parameters depending on digest(s) in signed message.
3225 *) Add engine support for EVP_PKEY_ASN1_METHOD. Add functions to process
3226 an ENGINE asn1 method. Support ENGINE lookups in the ASN1 code.
3229 *) Initial engine support for EVP_PKEY_METHOD. New functions to permit
3230 an engine to register a method. Add ENGINE lookups for methods and
3231 functional reference processing.
3234 *) New functions EVP_Digest{Sign,Verify)*. These are enchance versions of
3235 EVP_{Sign,Verify}* which allow an application to customise the signature
3239 *) New -resign option to smime utility. This adds one or more signers
3240 to an existing PKCS#7 signedData structure. Also -md option to use an
3241 alternative message digest algorithm for signing.
3244 *) Tidy up PKCS#7 routines and add new functions to make it easier to
3245 create PKCS7 structures containing multiple signers. Update smime
3246 application to support multiple signers.
3249 *) New -macalg option to pkcs12 utility to allow setting of an alternative
3253 *) Initial support for PKCS#5 v2.0 PRFs other than default SHA1 HMAC.
3254 Reorganize PBE internals to lookup from a static table using NIDs,
3255 add support for HMAC PBE OID translation. Add a EVP_CIPHER ctrl:
3256 EVP_CTRL_PBE_PRF_NID this allows a cipher to specify an alternative
3257 PRF which will be automatically used with PBES2.
3260 *) Replace the algorithm specific calls to generate keys in "req" with the
3264 *) Update PKCS#7 enveloped data routines to use new API. This is now
3265 supported by any public key method supporting the encrypt operation. A
3266 ctrl is added to allow the public key algorithm to examine or modify
3267 the PKCS#7 RecipientInfo structure if it needs to: for RSA this is
3271 *) Add a ctrl to asn1 method to allow a public key algorithm to express
3272 a default digest type to use. In most cases this will be SHA1 but some
3273 algorithms (such as GOST) need to specify an alternative digest. The
3274 return value indicates how strong the preference is 1 means optional and
3275 2 is mandatory (that is it is the only supported type). Modify
3276 ASN1_item_sign() to accept a NULL digest argument to indicate it should
3277 use the default md. Update openssl utilities to use the default digest
3278 type for signing if it is not explicitly indicated.
3281 *) Use OID cross reference table in ASN1_sign() and ASN1_verify(). New
3282 EVP_MD flag EVP_MD_FLAG_PKEY_METHOD_SIGNATURE. This uses the relevant
3283 signing method from the key type. This effectively removes the link
3284 between digests and public key types.
3287 *) Add an OID cross reference table and utility functions. Its purpose is to
3288 translate between signature OIDs such as SHA1WithrsaEncryption and SHA1,
3289 rsaEncryption. This will allow some of the algorithm specific hackery
3290 needed to use the correct OID to be removed.
3293 *) Remove algorithm specific dependencies when setting PKCS7_SIGNER_INFO
3294 structures for PKCS7_sign(). They are now set up by the relevant public
3298 *) Add provisional EC pkey method with support for ECDSA and ECDH.
3301 *) Add support for key derivation (agreement) in the API, DH method and
3305 *) Add DSA pkey method and DH pkey methods, extend DH ASN1 method to support
3306 public and private key formats. As a side effect these add additional
3307 command line functionality not previously available: DSA signatures can be
3308 generated and verified using pkeyutl and DH key support and generation in
3313 [Oliver Tappe <zooey@hirschkaefer.de>]
3315 *) New make target "install_html_docs" installs HTML renditions of the
3317 [Oliver Tappe <zooey@hirschkaefer.de>]
3319 *) New utility "genpkey" this is analogous to "genrsa" etc except it can
3320 generate keys for any algorithm. Extend and update EVP_PKEY_METHOD to
3321 support key and parameter generation and add initial key generation
3322 functionality for RSA.
3325 *) Add functions for main EVP_PKEY_method operations. The undocumented
3326 functions EVP_PKEY_{encrypt,decrypt} have been renamed to
3327 EVP_PKEY_{encrypt,decrypt}_old.
3330 *) Initial definitions for EVP_PKEY_METHOD. This will be a high level public
3331 key API, doesn't do much yet.
3334 *) New function EVP_PKEY_asn1_get0_info() to retrieve information about
3335 public key algorithms. New option to openssl utility:
3336 "list-public-key-algorithms" to print out info.
3339 *) Implement the Supported Elliptic Curves Extension for
3340 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
3343 *) Don't free up OIDs in OBJ_cleanup() if they are in use by EVP_MD or
3344 EVP_CIPHER structures to avoid later problems in EVP_cleanup().
3347 *) New utilities pkey and pkeyparam. These are similar to algorithm specific
3348 utilities such as rsa, dsa, dsaparam etc except they process any key
3352 *) Transfer public key printing routines to EVP_PKEY_ASN1_METHOD. New
3353 functions EVP_PKEY_print_public(), EVP_PKEY_print_private(),
3354 EVP_PKEY_print_param() to print public key data from an EVP_PKEY
3358 *) Initial support for pluggable public key ASN1.
3359 De-spaghettify the public key ASN1 handling. Move public and private
3360 key ASN1 handling to a new EVP_PKEY_ASN1_METHOD structure. Relocate
3361 algorithm specific handling to a single module within the relevant
3362 algorithm directory. Add functions to allow (near) opaque processing
3363 of public and private key structures.
3366 *) Implement the Supported Point Formats Extension for
3367 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
3370 *) Add initial support for RFC 4279 PSK TLS ciphersuites. Add members
3371 for the psk identity [hint] and the psk callback functions to the
3372 SSL_SESSION, SSL and SSL_CTX structure.
3375 PSK-RC4-SHA, PSK-3DES-EDE-CBC-SHA, PSK-AES128-CBC-SHA,
3379 SSL_CTX_use_psk_identity_hint
3380 SSL_get_psk_identity_hint
3381 SSL_get_psk_identity
3382 SSL_use_psk_identity_hint
3384 [Mika Kousa and Pasi Eronen of Nokia Corporation]
3386 *) Add RFC 3161 compliant time stamp request creation, response generation
3387 and response verification functionality.
3388 [Zoltán Glózik <zglozik@opentsa.org>, The OpenTSA Project]
3390 *) Add initial support for TLS extensions, specifically for the server_name
3391 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
3392 have new members for a host name. The SSL data structure has an
3393 additional member SSL_CTX *initial_ctx so that new sessions can be
3394 stored in that context to allow for session resumption, even after the
3395 SSL has been switched to a new SSL_CTX in reaction to a client's
3396 server_name extension.
3398 New functions (subject to change):
3400 SSL_get_servername()
3401 SSL_get_servername_type()
3404 New CTRL codes and macros (subject to change):
3406 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
3407 - SSL_CTX_set_tlsext_servername_callback()
3408 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
3409 - SSL_CTX_set_tlsext_servername_arg()
3410 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
3412 openssl s_client has a new '-servername ...' option.
3414 openssl s_server has new options '-servername_host ...', '-cert2 ...',
3415 '-key2 ...', '-servername_fatal' (subject to change). This allows
3416 testing the HostName extension for a specific single host name ('-cert'
3417 and '-key' remain fallbacks for handshakes without HostName
3418 negotiation). If the unrecognized_name alert has to be sent, this by
3419 default is a warning; it becomes fatal with the '-servername_fatal'
3422 [Peter Sylvester, Remy Allais, Christophe Renou]
3424 *) Whirlpool hash implementation is added.
3427 *) BIGNUM code on 64-bit SPARCv9 targets is switched from bn(64,64) to
3428 bn(64,32). Because of instruction set limitations it doesn't have
3429 any negative impact on performance. This was done mostly in order
3430 to make it possible to share assembler modules, such as bn_mul_mont
3431 implementations, between 32- and 64-bit builds without hassle.
3434 *) Move code previously exiled into file crypto/ec/ec2_smpt.c
3435 to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
3439 *) New candidate for BIGNUM assembler implementation, bn_mul_mont,
3440 dedicated Montgomery multiplication procedure, is introduced.
3441 BN_MONT_CTX is modified to allow bn_mul_mont to reach for higher
3442 "64-bit" performance on certain 32-bit targets.
3445 *) New option SSL_OP_NO_COMP to disable use of compression selectively
3446 in SSL structures. New SSL ctrl to set maximum send fragment size.
3447 Save memory by seeting the I/O buffer sizes dynamically instead of
3448 using the maximum available value.
3451 *) New option -V for 'openssl ciphers'. This prints the ciphersuite code
3452 in addition to the text details.
3455 *) Very, very preliminary EXPERIMENTAL support for printing of general
3456 ASN1 structures. This currently produces rather ugly output and doesn't
3457 handle several customised structures at all.
3460 *) Integrated support for PVK file format and some related formats such
3461 as MS PUBLICKEYBLOB and PRIVATEKEYBLOB. Command line switches to support
3462 these in the 'rsa' and 'dsa' utilities.
3465 *) Support for PKCS#1 RSAPublicKey format on rsa utility command line.
3468 *) Remove the ancient ASN1_METHOD code. This was only ever used in one
3469 place for the (very old) "NETSCAPE" format certificates which are now
3470 handled using new ASN1 code equivalents.
3473 *) Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
3474 pointer and make the SSL_METHOD parameter in SSL_CTX_new,
3475 SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
3478 *) Modify CRL distribution points extension code to print out previously
3479 unsupported fields. Enhance extension setting code to allow setting of
3483 *) Add print and set support for Issuing Distribution Point CRL extension.
3486 *) Change 'Configure' script to enable Camellia by default.
3489 Changes between 0.9.8m and 0.9.8n [24 Mar 2010]
3491 *) When rejecting SSL/TLS records due to an incorrect version number, never
3492 update s->server with a new major version number. As of
3493 - OpenSSL 0.9.8m if 'short' is a 16-bit type,
3494 - OpenSSL 0.9.8f if 'short' is longer than 16 bits,
3495 the previous behavior could result in a read attempt at NULL when
3496 receiving specific incorrect SSL/TLS records once record payload
3497 protection is active. (CVE-2010-0740)
3498 [Bodo Moeller, Adam Langley <agl@chromium.org>]
3500 *) Fix for CVE-2010-0433 where some kerberos enabled versions of OpenSSL
3501 could be crashed if the relevant tables were not present (e.g. chrooted).
3502 [Tomas Hoger <thoger@redhat.com>]
3504 Changes between 0.9.8l and 0.9.8m [25 Feb 2010]
3506 *) Always check bn_wexpend() return values for failure. (CVE-2009-3245)
3507 [Martin Olsson, Neel Mehta]
3509 *) Fix X509_STORE locking: Every 'objs' access requires a lock (to
3510 accommodate for stack sorting, always a write lock!).
3513 *) On some versions of WIN32 Heap32Next is very slow. This can cause
3514 excessive delays in the RAND_poll(): over a minute. As a workaround
3515 include a time check in the inner Heap32Next loop too.
3518 *) The code that handled flushing of data in SSL/TLS originally used the
3519 BIO_CTRL_INFO ctrl to see if any data was pending first. This caused
3520 the problem outlined in PR#1949. The fix suggested there however can
3521 trigger problems with buggy BIO_CTRL_WPENDING (e.g. some versions
3522 of Apache). So instead simplify the code to flush unconditionally.
3523 This should be fine since flushing with no data to flush is a no op.
3526 *) Handle TLS versions 2.0 and later properly and correctly use the
3527 highest version of TLS/SSL supported. Although TLS >= 2.0 is some way
3528 off ancient servers have a habit of sticking around for a while...
3531 *) Modify compression code so it frees up structures without using the
3532 ex_data callbacks. This works around a problem where some applications
3533 call CRYPTO_cleanup_all_ex_data() before application exit (e.g. when
3534 restarting) then use compression (e.g. SSL with compression) later.
3535 This results in significant per-connection memory leaks and
3536 has caused some security issues including CVE-2008-1678 and
3540 *) Constify crypto/cast (i.e., <openssl/cast.h>): a CAST_KEY doesn't
3541 change when encrypting or decrypting.
3544 *) Add option SSL_OP_LEGACY_SERVER_CONNECT which will allow clients to
3545 connect and renegotiate with servers which do not support RI.
3546 Until RI is more widely deployed this option is enabled by default.
3549 *) Add "missing" ssl ctrls to clear options and mode.
3552 *) If client attempts to renegotiate and doesn't support RI respond with
3553 a no_renegotiation alert as required by RFC5746. Some renegotiating
3554 TLS clients will continue a connection gracefully when they receive
3555 the alert. Unfortunately OpenSSL mishandled this alert and would hang
3556 waiting for a server hello which it will never receive. Now we treat a
3557 received no_renegotiation alert as a fatal error. This is because
3558 applications requesting a renegotiation might well expect it to succeed
3559 and would have no code in place to handle the server denying it so the
3560 only safe thing to do is to terminate the connection.
3563 *) Add ctrl macro SSL_get_secure_renegotiation_support() which returns 1 if
3564 peer supports secure renegotiation and 0 otherwise. Print out peer
3565 renegotiation support in s_client/s_server.
3568 *) Replace the highly broken and deprecated SPKAC certification method with
3569 the updated NID creation version. This should correctly handle UTF8.
3572 *) Implement RFC5746. Re-enable renegotiation but require the extension
3573 as needed. Unfortunately, SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
3574 turns out to be a bad idea. It has been replaced by
3575 SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION which can be set with
3576 SSL_CTX_set_options(). This is really not recommended unless you
3577 know what you are doing.
3578 [Eric Rescorla <ekr@networkresonance.com>, Ben Laurie, Steve Henson]
3580 *) Fixes to stateless session resumption handling. Use initial_ctx when
3581 issuing and attempting to decrypt tickets in case it has changed during
3582 servername handling. Use a non-zero length session ID when attempting
3583 stateless session resumption: this makes it possible to determine if
3584 a resumption has occurred immediately after receiving server hello
3585 (several places in OpenSSL subtly assume this) instead of later in
3589 *) The functions ENGINE_ctrl(), OPENSSL_isservice(),
3590 CMS_get1_RecipientRequest() and RAND_bytes() can return <=0 on error
3591 fixes for a few places where the return code is not checked
3593 [Julia Lawall <julia@diku.dk>]
3595 *) Add --strict-warnings option to Configure script to include devteam
3596 warnings in other configurations.
3599 *) Add support for --libdir option and LIBDIR variable in makefiles. This
3600 makes it possible to install openssl libraries in locations which
3601 have names other than "lib", for example "/usr/lib64" which some
3603 [Steve Henson, based on patch from Jeremy Utley]
3605 *) Don't allow the use of leading 0x80 in OIDs. This is a violation of
3606 X690 8.9.12 and can produce some misleading textual output of OIDs.
3607 [Steve Henson, reported by Dan Kaminsky]
3609 *) Delete MD2 from algorithm tables. This follows the recommendation in
3610 several standards that it is not used in new applications due to
3611 several cryptographic weaknesses. For binary compatibility reasons
3612 the MD2 API is still compiled in by default.
3615 *) Add compression id to {d2i,i2d}_SSL_SESSION so it is correctly saved
3619 *) Rename uni2asc and asc2uni functions to OPENSSL_uni2asc and
3620 OPENSSL_asc2uni conditionally on Netware platforms to avoid a name
3622 [Guenter <lists@gknw.net>]
3624 *) Fix the server certificate chain building code to use X509_verify_cert(),
3625 it used to have an ad-hoc builder which was unable to cope with anything
3626 other than a simple chain.
3627 [David Woodhouse <dwmw2@infradead.org>, Steve Henson]
3629 *) Don't check self signed certificate signatures in X509_verify_cert()
3630 by default (a flag can override this): it just wastes time without
3631 adding any security. As a useful side effect self signed root CAs
3632 with non-FIPS digests are now usable in FIPS mode.
3635 *) In dtls1_process_out_of_seq_message() the check if the current message
3636 is already buffered was missing. For every new message was memory
3637 allocated, allowing an attacker to perform an denial of service attack
3638 with sending out of seq handshake messages until there is no memory
3639 left. Additionally every future messege was buffered, even if the
3640 sequence number made no sense and would be part of another handshake.
3641 So only messages with sequence numbers less than 10 in advance will be
3642 buffered. (CVE-2009-1378)
3643 [Robin Seggelmann, discovered by Daniel Mentz]
3645 *) Records are buffered if they arrive with a future epoch to be
3646 processed after finishing the corresponding handshake. There is
3647 currently no limitation to this buffer allowing an attacker to perform
3648 a DOS attack with sending records with future epochs until there is no
3649 memory left. This patch adds the pqueue_size() function to determine
3650 the size of a buffer and limits the record buffer to 100 entries.
3652 [Robin Seggelmann, discovered by Daniel Mentz]
3654 *) Keep a copy of frag->msg_header.frag_len so it can be used after the
3655 parent structure is freed. (CVE-2009-1379)
3658 *) Handle non-blocking I/O properly in SSL_shutdown() call.
3659 [Darryl Miles <darryl-mailinglists@netbauds.net>]
3662 [Ilya O. <vrghost@gmail.com>]
3664 Changes between 0.9.8k and 0.9.8l [5 Nov 2009]
3666 *) Disable renegotiation completely - this fixes a severe security
3667 problem (CVE-2009-3555) at the cost of breaking all
3668 renegotiation. Renegotiation can be re-enabled by setting
3669 SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION in s3->flags at
3670 run-time. This is really not recommended unless you know what
3674 Changes between 0.9.8j and 0.9.8k [25 Mar 2009]
3676 *) Don't set val to NULL when freeing up structures, it is freed up by
3677 underlying code. If sizeof(void *) > sizeof(long) this can result in
3678 zeroing past the valid field. (CVE-2009-0789)
3679 [Paolo Ganci <Paolo.Ganci@AdNovum.CH>]
3681 *) Fix bug where return value of CMS_SignerInfo_verify_content() was not
3682 checked correctly. This would allow some invalid signed attributes to
3683 appear to verify correctly. (CVE-2009-0591)
3684 [Ivan Nestlerode <inestlerode@us.ibm.com>]
3686 *) Reject UniversalString and BMPString types with invalid lengths. This
3687 prevents a crash in ASN1_STRING_print_ex() which assumes the strings have
3688 a legal length. (CVE-2009-0590)
3691 *) Set S/MIME signing as the default purpose rather than setting it
3692 unconditionally. This allows applications to override it at the store
3696 *) Permit restricted recursion of ASN1 strings. This is needed in practice
3697 to handle some structures.
3700 *) Improve efficiency of mem_gets: don't search whole buffer each time
3702 [Jeremy Shapiro <jnshapir@us.ibm.com>]
3704 *) New -hex option for openssl rand.
3707 *) Print out UTF8String and NumericString when parsing ASN1.
3710 *) Support NumericString type for name components.
3713 *) Allow CC in the environment to override the automatically chosen
3714 compiler. Note that nothing is done to ensure flags work with the
3718 Changes between 0.9.8i and 0.9.8j [07 Jan 2009]
3720 *) Properly check EVP_VerifyFinal() and similar return values
3722 [Ben Laurie, Bodo Moeller, Google Security Team]
3724 *) Enable TLS extensions by default.
3727 *) Allow the CHIL engine to be loaded, whether the application is
3728 multithreaded or not. (This does not release the developer from the
3729 obligation to set up the dynamic locking callbacks.)
3730 [Sander Temme <sander@temme.net>]
3732 *) Use correct exit code if there is an error in dgst command.
3733 [Steve Henson; problem pointed out by Roland Dirlewanger]
3735 *) Tweak Configure so that you need to say "experimental-jpake" to enable
3736 JPAKE, and need to use -DOPENSSL_EXPERIMENTAL_JPAKE in applications.
3739 *) Add experimental JPAKE support, including demo authentication in
3740 s_client and s_server.
3743 *) Set the comparison function in v3_addr_canonize().
3744 [Rob Austein <sra@hactrn.net>]
3746 *) Add support for XMPP STARTTLS in s_client.
3747 [Philip Paeps <philip@freebsd.org>]
3749 *) Change the server-side SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG behavior
3750 to ensure that even with this option, only ciphersuites in the
3751 server's preference list will be accepted. (Note that the option
3752 applies only when resuming a session, so the earlier behavior was
3753 just about the algorithm choice for symmetric cryptography.)
3756 Changes between 0.9.8h and 0.9.8i [15 Sep 2008]
3758 *) Fix NULL pointer dereference if a DTLS server received
3759 ChangeCipherSpec as first record (CVE-2009-1386).
3762 *) Fix a state transition in s3_srvr.c and d1_srvr.c
3763 (was using SSL3_ST_CW_CLNT_HELLO_B, should be ..._ST_SW_SRVR_...).
3766 *) The fix in 0.9.8c that supposedly got rid of unsafe
3767 double-checked locking was incomplete for RSA blinding,
3768 addressing just one layer of what turns out to have been
3769 doubly unsafe triple-checked locking.
3771 So now fix this for real by retiring the MONT_HELPER macro
3772 in crypto/rsa/rsa_eay.c.
3774 [Bodo Moeller; problem pointed out by Marius Schilder]
3776 *) Various precautionary measures:
3778 - Avoid size_t integer overflow in HASH_UPDATE (md32_common.h).
3780 - Avoid a buffer overflow in d2i_SSL_SESSION() (ssl_asn1.c).
3781 (NB: This would require knowledge of the secret session ticket key
3782 to exploit, in which case you'd be SOL either way.)
3784 - Change bn_nist.c so that it will properly handle input BIGNUMs
3785 outside the expected range.
3787 - Enforce the 'num' check in BN_div() (bn_div.c) for non-BN_DEBUG
3790 [Neel Mehta, Bodo Moeller]
3792 *) Allow engines to be "soft loaded" - i.e. optionally don't die if
3793 the load fails. Useful for distros.
3794 [Ben Laurie and the FreeBSD team]
3796 *) Add support for Local Machine Keyset attribute in PKCS#12 files.
3799 *) Fix BN_GF2m_mod_arr() top-bit cleanup code.
3802 *) Expand ENGINE to support engine supplied SSL client certificate functions.
3804 This work was sponsored by Logica.
3807 *) Add CryptoAPI ENGINE to support use of RSA and DSA keys held in Windows
3808 keystores. Support for SSL/TLS client authentication too.
3809 Not compiled unless enable-capieng specified to Configure.
3811 This work was sponsored by Logica.
3814 *) Fix bug in X509_ATTRIBUTE creation: dont set attribute using
3815 ASN1_TYPE_set1 if MBSTRING flag set. This bug would crash certain
3816 attribute creation routines such as certifcate requests and PKCS#12
3820 Changes between 0.9.8g and 0.9.8h [28 May 2008]
3822 *) Fix flaw if 'Server Key exchange message' is omitted from a TLS
3823 handshake which could lead to a cilent crash as found using the
3824 Codenomicon TLS test suite (CVE-2008-1672)
3825 [Steve Henson, Mark Cox]
3827 *) Fix double free in TLS server name extensions which could lead to
3828 a remote crash found by Codenomicon TLS test suite (CVE-2008-0891)
3831 *) Clear error queue in SSL_CTX_use_certificate_chain_file()
3833 Clear the error queue to ensure that error entries left from
3834 older function calls do not interfere with the correct operation.
3835 [Lutz Jaenicke, Erik de Castro Lopo]
3837 *) Remove root CA certificates of commercial CAs:
3839 The OpenSSL project does not recommend any specific CA and does not
3840 have any policy with respect to including or excluding any CA.
3841 Therefore it does not make any sense to ship an arbitrary selection
3842 of root CA certificates with the OpenSSL software.
3845 *) RSA OAEP patches to fix two separate invalid memory reads.
3846 The first one involves inputs when 'lzero' is greater than
3847 'SHA_DIGEST_LENGTH' (it would read about SHA_DIGEST_LENGTH bytes
3848 before the beginning of from). The second one involves inputs where
3849 the 'db' section contains nothing but zeroes (there is a one-byte
3850 invalid read after the end of 'db').
3851 [Ivan Nestlerode <inestlerode@us.ibm.com>]
3853 *) Partial backport from 0.9.9-dev:
3855 Introduce bn_mul_mont (dedicated Montgomery multiplication
3856 procedure) as a candidate for BIGNUM assembler implementation.
3857 While 0.9.9-dev uses assembler for various architectures, only
3858 x86_64 is available by default here in the 0.9.8 branch, and
3859 32-bit x86 is available through a compile-time setting.
3861 To try the 32-bit x86 assembler implementation, use Configure
3862 option "enable-montasm" (which exists only for this backport).
3864 As "enable-montasm" for 32-bit x86 disclaims code stability
3865 anyway, in this constellation we activate additional code
3866 backported from 0.9.9-dev for further performance improvements,
3867 namely BN_from_montgomery_word. (To enable this otherwise,
3868 e.g. x86_64, try "-DMONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD".)
3870 [Andy Polyakov (backport partially by Bodo Moeller)]
3872 *) Add TLS session ticket callback. This allows an application to set
3873 TLS ticket cipher and HMAC keys rather than relying on hardcoded fixed
3874 values. This is useful for key rollover for example where several key
3875 sets may exist with different names.
3878 *) Reverse ENGINE-internal logic for caching default ENGINE handles.
3879 This was broken until now in 0.9.8 releases, such that the only way
3880 a registered ENGINE could be used (assuming it initialises
3881 successfully on the host) was to explicitly set it as the default
3882 for the relevant algorithms. This is in contradiction with 0.9.7
3883 behaviour and the documentation. With this fix, when an ENGINE is
3884 registered into a given algorithm's table of implementations, the
3885 'uptodate' flag is reset so that auto-discovery will be used next
3886 time a new context for that algorithm attempts to select an
3888 [Ian Lister (tweaked by Geoff Thorpe)]
3890 *) Backport of CMS code to OpenSSL 0.9.8. This differs from the 0.9.9
3891 implemention in the following ways:
3893 Lack of EVP_PKEY_ASN1_METHOD means algorithm parameters have to be
3896 Lack of BER streaming support means one pass streaming processing is
3897 only supported if data is detached: setting the streaming flag is
3898 ignored for embedded content.
3900 CMS support is disabled by default and must be explicitly enabled
3901 with the enable-cms configuration option.
3904 *) Update the GMP engine glue to do direct copies between BIGNUM and
3905 mpz_t when openssl and GMP use the same limb size. Otherwise the
3906 existing "conversion via a text string export" trick is still used.
3907 [Paul Sheer <paulsheer@gmail.com>]
3909 *) Zlib compression BIO. This is a filter BIO which compressed and
3910 uncompresses any data passed through it.
3913 *) Add AES_wrap_key() and AES_unwrap_key() functions to implement
3914 RFC3394 compatible AES key wrapping.
3917 *) Add utility functions to handle ASN1 structures. ASN1_STRING_set0():
3918 sets string data without copying. X509_ALGOR_set0() and
3919 X509_ALGOR_get0(): set and retrieve X509_ALGOR (AlgorithmIdentifier)
3920 data. Attribute function X509at_get0_data_by_OBJ(): retrieves data
3921 from an X509_ATTRIBUTE structure optionally checking it occurs only
3922 once. ASN1_TYPE_set1(): set and ASN1_TYPE structure copying supplied
3926 *) Fix BN flag handling in RSA_eay_mod_exp() and BN_MONT_CTX_set()
3927 to get the expected BN_FLG_CONSTTIME behavior.
3928 [Bodo Moeller (Google)]
3932 - fixed wrong usage of ioctlsocket() when build for LIBC BSD sockets
3933 - fixed do_tests.pl to run the test suite with CLIB builds too (CLIB_OPT)
3934 - added some more tests to do_tests.pl
3935 - fixed RunningProcess usage so that it works with newer LIBC NDKs too
3936 - removed usage of BN_LLONG for CLIB builds to avoid runtime dependency
3937 - added new Configure targets netware-clib-bsdsock, netware-clib-gcc,
3938 netware-clib-bsdsock-gcc, netware-libc-bsdsock-gcc
3939 - various changes to netware.pl to enable gcc-cross builds on Win32
3941 - changed crypto/bio/b_sock.c to work with macro functions (CLIB BSD)
3942 - various changes to fix missing prototype warnings
3943 - fixed x86nasm.pl to create correct asm files for NASM COFF output
3944 - added AES, WHIRLPOOL and CPUID assembler code to build files
3945 - added missing AES assembler make rules to mk1mf.pl
3946 - fixed order of includes in apps/ocsp.c so that e_os.h settings apply
3947 [Guenter Knauf <eflash@gmx.net>]
3949 *) Implement certificate status request TLS extension defined in RFC3546.
3950 A client can set the appropriate parameters and receive the encoded
3951 OCSP response via a callback. A server can query the supplied parameters
3952 and set the encoded OCSP response in the callback. Add simplified examples
3953 to s_client and s_server.
3956 Changes between 0.9.8f and 0.9.8g [19 Oct 2007]
3958 *) Fix various bugs:
3959 + Binary incompatibility of ssl_ctx_st structure
3960 + DTLS interoperation with non-compliant servers
3961 + Don't call get_session_cb() without proposed session
3962 + Fix ia64 assembler code
3963 [Andy Polyakov, Steve Henson]
3965 Changes between 0.9.8e and 0.9.8f [11 Oct 2007]
3967 *) DTLS Handshake overhaul. There were longstanding issues with
3968 OpenSSL DTLS implementation, which were making it impossible for
3969 RFC 4347 compliant client to communicate with OpenSSL server.
3970 Unfortunately just fixing these incompatibilities would "cut off"
3971 pre-0.9.8f clients. To allow for hassle free upgrade post-0.9.8e
3972 server keeps tolerating non RFC compliant syntax. The opposite is
3973 not true, 0.9.8f client can not communicate with earlier server.
3974 This update even addresses CVE-2007-4995.
3977 *) Changes to avoid need for function casts in OpenSSL: some compilers
3978 (gcc 4.2 and later) reject their use.
3979 [Kurt Roeckx <kurt@roeckx.be>, Peter Hartley <pdh@utter.chaos.org.uk>,
3982 *) Add RFC4507 support to OpenSSL. This includes the corrections in
3983 RFC4507bis. The encrypted ticket format is an encrypted encoded
3984 SSL_SESSION structure, that way new session features are automatically
3987 If a client application caches session in an SSL_SESSION structure
3988 support is transparent because tickets are now stored in the encoded
3991 The SSL_CTX structure automatically generates keys for ticket
3992 protection in servers so again support should be possible
3993 with no application modification.
3995 If a client or server wishes to disable RFC4507 support then the option
3996 SSL_OP_NO_TICKET can be set.
3998 Add a TLS extension debugging callback to allow the contents of any client
3999 or server extensions to be examined.
4001 This work was sponsored by Google.
4004 *) Add initial support for TLS extensions, specifically for the server_name
4005 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
4006 have new members for a host name. The SSL data structure has an
4007 additional member SSL_CTX *initial_ctx so that new sessions can be
4008 stored in that context to allow for session resumption, even after the
4009 SSL has been switched to a new SSL_CTX in reaction to a client's
4010 server_name extension.
4012 New functions (subject to change):
4014 SSL_get_servername()
4015 SSL_get_servername_type()
4018 New CTRL codes and macros (subject to change):
4020 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
4021 - SSL_CTX_set_tlsext_servername_callback()
4022 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
4023 - SSL_CTX_set_tlsext_servername_arg()
4024 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
4026 openssl s_client has a new '-servername ...' option.
4028 openssl s_server has new options '-servername_host ...', '-cert2 ...',
4029 '-key2 ...', '-servername_fatal' (subject to change). This allows
4030 testing the HostName extension for a specific single host name ('-cert'
4031 and '-key' remain fallbacks for handshakes without HostName
4032 negotiation). If the unrecognized_name alert has to be sent, this by
4033 default is a warning; it becomes fatal with the '-servername_fatal'
4036 [Peter Sylvester, Remy Allais, Christophe Renou, Steve Henson]
4038 *) Add AES and SSE2 assembly language support to VC++ build.
4041 *) Mitigate attack on final subtraction in Montgomery reduction.
4044 *) Fix crypto/ec/ec_mult.c to work properly with scalars of value 0
4045 (which previously caused an internal error).
4048 *) Squeeze another 10% out of IGE mode when in != out.
4051 *) AES IGE mode speedup.
4052 [Dean Gaudet (Google)]
4054 *) Add the Korean symmetric 128-bit cipher SEED (see
4055 http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp) and
4056 add SEED ciphersuites from RFC 4162:
4058 TLS_RSA_WITH_SEED_CBC_SHA = "SEED-SHA"
4059 TLS_DHE_DSS_WITH_SEED_CBC_SHA = "DHE-DSS-SEED-SHA"
4060 TLS_DHE_RSA_WITH_SEED_CBC_SHA = "DHE-RSA-SEED-SHA"
4061 TLS_DH_anon_WITH_SEED_CBC_SHA = "ADH-SEED-SHA"
4063 To minimize changes between patchlevels in the OpenSSL 0.9.8
4064 series, SEED remains excluded from compilation unless OpenSSL
4065 is configured with 'enable-seed'.
4066 [KISA, Bodo Moeller]
4068 *) Mitigate branch prediction attacks, which can be practical if a
4069 single processor is shared, allowing a spy process to extract
4070 information. For detailed background information, see
4071 http://eprint.iacr.org/2007/039 (O. Aciicmez, S. Gueron,
4072 J.-P. Seifert, "New Branch Prediction Vulnerabilities in OpenSSL
4073 and Necessary Software Countermeasures"). The core of the change
4074 are new versions BN_div_no_branch() and
4075 BN_mod_inverse_no_branch() of BN_div() and BN_mod_inverse(),
4076 respectively, which are slower, but avoid the security-relevant
4077 conditional branches. These are automatically called by BN_div()
4078 and BN_mod_inverse() if the flag BN_FLG_CONSTTIME is set for one
4079 of the input BIGNUMs. Also, BN_is_bit_set() has been changed to
4080 remove a conditional branch.
4082 BN_FLG_CONSTTIME is the new name for the previous
4083 BN_FLG_EXP_CONSTTIME flag, since it now affects more than just
4084 modular exponentiation. (Since OpenSSL 0.9.7h, setting this flag
4085 in the exponent causes BN_mod_exp_mont() to use the alternative
4086 implementation in BN_mod_exp_mont_consttime().) The old name
4087 remains as a deprecated alias.
4089 Similary, RSA_FLAG_NO_EXP_CONSTTIME is replaced by a more general
4090 RSA_FLAG_NO_CONSTTIME flag since the RSA implementation now uses
4091 constant-time implementations for more than just exponentiation.
4092 Here too the old name is kept as a deprecated alias.
4094 BN_BLINDING_new() will now use BN_dup() for the modulus so that
4095 the BN_BLINDING structure gets an independent copy of the
4096 modulus. This means that the previous "BIGNUM *m" argument to
4097 BN_BLINDING_new() and to BN_BLINDING_create_param() now
4098 essentially becomes "const BIGNUM *m", although we can't actually
4099 change this in the header file before 0.9.9. It allows
4100 RSA_setup_blinding() to use BN_with_flags() on the modulus to
4101 enable BN_FLG_CONSTTIME.
4103 [Matthew D Wood (Intel Corp)]
4105 *) In the SSL/TLS server implementation, be strict about session ID
4106 context matching (which matters if an application uses a single
4107 external cache for different purposes). Previously,
4108 out-of-context reuse was forbidden only if SSL_VERIFY_PEER was
4109 set. This did ensure strict client verification, but meant that,
4110 with applications using a single external cache for quite
4111 different requirements, clients could circumvent ciphersuite
4112 restrictions for a given session ID context by starting a session
4113 in a different context.
4116 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
4117 a ciphersuite string such as "DEFAULT:RSA" cannot enable
4118 authentication-only ciphersuites.
4121 *) Update the SSL_get_shared_ciphers() fix CVE-2006-3738 which was
4122 not complete and could lead to a possible single byte overflow
4123 (CVE-2007-5135) [Ben Laurie]
4125 Changes between 0.9.8d and 0.9.8e [23 Feb 2007]
4127 *) Since AES128 and AES256 (and similarly Camellia128 and
4128 Camellia256) share a single mask bit in the logic of
4129 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
4130 kludge to work properly if AES128 is available and AES256 isn't
4131 (or if Camellia128 is available and Camellia256 isn't).
4134 *) Fix the BIT STRING encoding generated by crypto/ec/ec_asn1.c
4135 (within i2d_ECPrivateKey, i2d_ECPKParameters, i2d_ECParameters):
4136 When a point or a seed is encoded in a BIT STRING, we need to
4137 prevent the removal of trailing zero bits to get the proper DER
4138 encoding. (By default, crypto/asn1/a_bitstr.c assumes the case
4139 of a NamedBitList, for which trailing 0 bits need to be removed.)
4142 *) Have SSL/TLS server implementation tolerate "mismatched" record
4143 protocol version while receiving ClientHello even if the
4144 ClientHello is fragmented. (The server can't insist on the
4145 particular protocol version it has chosen before the ServerHello
4146 message has informed the client about his choice.)
4149 *) Add RFC 3779 support.
4150 [Rob Austein for ARIN, Ben Laurie]
4152 *) Load error codes if they are not already present instead of using a
4153 static variable. This allows them to be cleanly unloaded and reloaded.
4154 Improve header file function name parsing.
4157 *) extend SMTP and IMAP protocol emulation in s_client to use EHLO
4158 or CAPABILITY handshake as required by RFCs.
4161 Changes between 0.9.8c and 0.9.8d [28 Sep 2006]
4163 *) Introduce limits to prevent malicious keys being able to
4164 cause a denial of service. (CVE-2006-2940)
4165 [Steve Henson, Bodo Moeller]
4167 *) Fix ASN.1 parsing of certain invalid structures that can result
4168 in a denial of service. (CVE-2006-2937) [Steve Henson]
4170 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
4171 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
4173 *) Fix SSL client code which could crash if connecting to a
4174 malicious SSLv2 server. (CVE-2006-4343)
4175 [Tavis Ormandy and Will Drewry, Google Security Team]
4177 *) Since 0.9.8b, ciphersuite strings naming explicit ciphersuites
4178 match only those. Before that, "AES256-SHA" would be interpreted
4179 as a pattern and match "AES128-SHA" too (since AES128-SHA got
4180 the same strength classification in 0.9.7h) as we currently only
4181 have a single AES bit in the ciphersuite description bitmap.
4182 That change, however, also applied to ciphersuite strings such as
4183 "RC4-MD5" that intentionally matched multiple ciphersuites --
4184 namely, SSL 2.0 ciphersuites in addition to the more common ones
4185 from SSL 3.0/TLS 1.0.
4187 So we change the selection algorithm again: Naming an explicit
4188 ciphersuite selects this one ciphersuite, and any other similar
4189 ciphersuite (same bitmap) from *other* protocol versions.
4190 Thus, "RC4-MD5" again will properly select both the SSL 2.0
4191 ciphersuite and the SSL 3.0/TLS 1.0 ciphersuite.
4193 Since SSL 2.0 does not have any ciphersuites for which the
4194 128/256 bit distinction would be relevant, this works for now.
4195 The proper fix will be to use different bits for AES128 and
4196 AES256, which would have avoided the problems from the beginning;
4197 however, bits are scarce, so we can only do this in a new release
4198 (not just a patchlevel) when we can change the SSL_CIPHER
4199 definition to split the single 'unsigned long mask' bitmap into
4200 multiple values to extend the available space.
4204 Changes between 0.9.8b and 0.9.8c [05 Sep 2006]
4206 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
4207 (CVE-2006-4339) [Ben Laurie and Google Security Team]
4209 *) Add AES IGE and biIGE modes.
4212 *) Change the Unix randomness entropy gathering to use poll() when
4213 possible instead of select(), since the latter has some
4214 undesirable limitations.
4215 [Darryl Miles via Richard Levitte and Bodo Moeller]
4217 *) Disable "ECCdraft" ciphersuites more thoroughly. Now special
4218 treatment in ssl/ssl_ciph.s makes sure that these ciphersuites
4219 cannot be implicitly activated as part of, e.g., the "AES" alias.
4220 However, please upgrade to OpenSSL 0.9.9[-dev] for
4221 non-experimental use of the ECC ciphersuites to get TLS extension
4222 support, which is required for curve and point format negotiation
4223 to avoid potential handshake problems.
4226 *) Disable rogue ciphersuites:
4228 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
4229 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
4230 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
4232 The latter two were purportedly from
4233 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
4236 Also deactivate the remaining ciphersuites from
4237 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
4238 unofficial, and the ID has long expired.
4241 *) Fix RSA blinding Heisenbug (problems sometimes occurred on
4242 dual-core machines) and other potential thread-safety issues.
4245 *) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
4246 versions), which is now available for royalty-free use
4247 (see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
4248 Also, add Camellia TLS ciphersuites from RFC 4132.
4250 To minimize changes between patchlevels in the OpenSSL 0.9.8
4251 series, Camellia remains excluded from compilation unless OpenSSL
4252 is configured with 'enable-camellia'.
4255 *) Disable the padding bug check when compression is in use. The padding
4256 bug check assumes the first packet is of even length, this is not
4257 necessarily true if compresssion is enabled and can result in false
4258 positives causing handshake failure. The actual bug test is ancient
4259 code so it is hoped that implementations will either have fixed it by
4260 now or any which still have the bug do not support compression.
4263 Changes between 0.9.8a and 0.9.8b [04 May 2006]
4265 *) When applying a cipher rule check to see if string match is an explicit
4266 cipher suite and only match that one cipher suite if it is.
4269 *) Link in manifests for VC++ if needed.
4270 [Austin Ziegler <halostatue@gmail.com>]
4272 *) Update support for ECC-based TLS ciphersuites according to
4273 draft-ietf-tls-ecc-12.txt with proposed changes (but without
4274 TLS extensions, which are supported starting with the 0.9.9
4275 branch, not in the OpenSSL 0.9.8 branch).
4278 *) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
4279 opaque EVP_CIPHER_CTX handling.
4282 *) Fixes and enhancements to zlib compression code. We now only use
4283 "zlib1.dll" and use the default __cdecl calling convention on Win32
4284 to conform with the standards mentioned here:
4285 http://www.zlib.net/DLL_FAQ.txt
4286 Static zlib linking now works on Windows and the new --with-zlib-include
4287 --with-zlib-lib options to Configure can be used to supply the location
4288 of the headers and library. Gracefully handle case where zlib library
4292 *) Several fixes and enhancements to the OID generation code. The old code
4293 sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
4294 handle numbers larger than ULONG_MAX, truncated printing and had a
4295 non standard OBJ_obj2txt() behaviour.
4298 *) Add support for building of engines under engine/ as shared libraries
4299 under VC++ build system.
4302 *) Corrected the numerous bugs in the Win32 path splitter in DSO.
4303 Hopefully, we will not see any false combination of paths any more.
4306 Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
4308 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
4309 (part of SSL_OP_ALL). This option used to disable the
4310 countermeasure against man-in-the-middle protocol-version
4311 rollback in the SSL 2.0 server implementation, which is a bad
4312 idea. (CVE-2005-2969)
4314 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
4315 for Information Security, National Institute of Advanced Industrial
4316 Science and Technology [AIST], Japan)]
4318 *) Add two function to clear and return the verify parameter flags.
4321 *) Keep cipherlists sorted in the source instead of sorting them at
4322 runtime, thus removing the need for a lock.
4325 *) Avoid some small subgroup attacks in Diffie-Hellman.
4326 [Nick Mathewson and Ben Laurie]
4328 *) Add functions for well-known primes.
4331 *) Extended Windows CE support.
4332 [Satoshi Nakamura and Andy Polyakov]
4334 *) Initialize SSL_METHOD structures at compile time instead of during
4335 runtime, thus removing the need for a lock.
4338 *) Make PKCS7_decrypt() work even if no certificate is supplied by
4339 attempting to decrypt each encrypted key in turn. Add support to
4343 Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
4345 [NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
4348 *) Add libcrypto.pc and libssl.pc for those who feel they need them.
4351 *) Change CA.sh and CA.pl so they don't bundle the CSR and the private
4352 key into the same file any more.
4355 *) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
4358 *) Add -utf8 command line and config file option to 'ca'.
4359 [Stefan <stf@udoma.org]
4361 *) Removed the macro des_crypt(), as it seems to conflict with some
4362 libraries. Use DES_crypt().
4365 *) Correct naming of the 'chil' and '4758cca' ENGINEs. This
4366 involves renaming the source and generated shared-libs for
4367 both. The engines will accept the corrected or legacy ids
4368 ('ncipher' and '4758_cca' respectively) when binding. NB,
4369 this only applies when building 'shared'.
4370 [Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
4372 *) Add attribute functions to EVP_PKEY structure. Modify
4373 PKCS12_create() to recognize a CSP name attribute and
4374 use it. Make -CSP option work again in pkcs12 utility.
4377 *) Add new functionality to the bn blinding code:
4378 - automatic re-creation of the BN_BLINDING parameters after
4379 a fixed number of uses (currently 32)
4380 - add new function for parameter creation
4381 - introduce flags to control the update behaviour of the
4382 BN_BLINDING parameters
4383 - hide BN_BLINDING structure
4384 Add a second BN_BLINDING slot to the RSA structure to improve
4385 performance when a single RSA object is shared among several
4389 *) Add support for DTLS.
4390 [Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
4392 *) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
4393 to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
4396 *) Remove buggy and incomplete DH cert support from
4397 ssl/ssl_rsa.c and ssl/s3_both.c
4400 *) Use SHA-1 instead of MD5 as the default digest algorithm for
4401 the apps/openssl applications.
4404 *) Compile clean with "-Wall -Wmissing-prototypes
4405 -Wstrict-prototypes -Wmissing-declarations -Werror". Currently
4406 DEBUG_SAFESTACK must also be set.
4409 *) Change ./Configure so that certain algorithms can be disabled by default.
4410 The new counterpiece to "no-xxx" is "enable-xxx".
4412 The patented RC5 and MDC2 algorithms will now be disabled unless
4413 "enable-rc5" and "enable-mdc2", respectively, are specified.
4415 (IDEA remains enabled despite being patented. This is because IDEA
4416 is frequently required for interoperability, and there is no license
4417 fee for non-commercial use. As before, "no-idea" can be used to
4418 avoid this algorithm.)
4422 *) Add processing of proxy certificates (see RFC 3820). This work was
4423 sponsored by KTH (The Royal Institute of Technology in Stockholm) and
4424 EGEE (Enabling Grids for E-science in Europe).
4427 *) RC4 performance overhaul on modern architectures/implementations, such
4428 as Intel P4, IA-64 and AMD64.
4431 *) New utility extract-section.pl. This can be used specify an alternative
4432 section number in a pod file instead of having to treat each file as
4433 a separate case in Makefile. This can be done by adding two lines to the
4436 =for comment openssl_section:XXX
4438 The blank line is mandatory.
4442 *) New arguments -certform, -keyform and -pass for s_client and s_server
4443 to allow alternative format key and certificate files and passphrase
4447 *) New structure X509_VERIFY_PARAM which combines current verify parameters,
4448 update associated structures and add various utility functions.
4450 Add new policy related verify parameters, include policy checking in
4451 standard verify code. Enhance 'smime' application with extra parameters
4452 to support policy checking and print out.
4455 *) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
4456 Nehemiah processors. These extensions support AES encryption in hardware
4457 as well as RNG (though RNG support is currently disabled).
4458 [Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
4460 *) Deprecate BN_[get|set]_params() functions (they were ignored internally).
4463 *) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
4464 [Andy Polyakov and a number of other people]
4466 *) Improved PowerPC platform support. Most notably BIGNUM assembler
4467 implementation contributed by IBM.
4468 [Suresh Chari, Peter Waltenberg, Andy Polyakov]
4470 *) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
4471 exponent rather than 'unsigned long'. There is a corresponding change to
4472 the new 'rsa_keygen' element of the RSA_METHOD structure.
4473 [Jelte Jansen, Geoff Thorpe]
4475 *) Functionality for creating the initial serial number file is now
4476 moved from CA.pl to the 'ca' utility with a new option -create_serial.
4478 (Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
4479 number file to 1, which is bound to cause problems. To avoid
4480 the problems while respecting compatibility between different 0.9.7
4481 patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
4482 CA.pl for serial number initialization. With the new release 0.9.8,
4483 we can fix the problem directly in the 'ca' utility.)
4486 *) Reduced header interdepencies by declaring more opaque objects in
4487 ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
4488 give fewer recursive includes, which could break lazy source code - so
4489 this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
4490 developers should define this symbol when building and using openssl to
4491 ensure they track the recommended behaviour, interfaces, [etc], but
4492 backwards-compatible behaviour prevails when this isn't defined.
4495 *) New function X509_POLICY_NODE_print() which prints out policy nodes.
4498 *) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
4499 This will generate a random key of the appropriate length based on the
4500 cipher context. The EVP_CIPHER can provide its own random key generation
4501 routine to support keys of a specific form. This is used in the des and
4502 3des routines to generate a key of the correct parity. Update S/MIME
4503 code to use new functions and hence generate correct parity DES keys.
4504 Add EVP_CHECK_DES_KEY #define to return an error if the key is not
4505 valid (weak or incorrect parity).
4508 *) Add a local set of CRLs that can be used by X509_verify_cert() as well
4509 as looking them up. This is useful when the verified structure may contain
4510 CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
4511 present unless the new PKCS7_NO_CRL flag is asserted.
4514 *) Extend ASN1 oid configuration module. It now additionally accepts the
4517 shortName = some long name, 1.2.3.4
4520 *) Reimplemented the BN_CTX implementation. There is now no more static
4521 limitation on the number of variables it can handle nor the depth of the
4522 "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
4523 information can now expand as required, and rather than having a single
4524 static array of bignums, BN_CTX now uses a linked-list of such arrays
4525 allowing it to expand on demand whilst maintaining the usefulness of
4526 BN_CTX's "bundling".
4529 *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
4530 to allow all RSA operations to function using a single BN_CTX.
4533 *) Preliminary support for certificate policy evaluation and checking. This
4534 is initially intended to pass the tests outlined in "Conformance Testing
4535 of Relying Party Client Certificate Path Processing Logic" v1.07.
4538 *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
4539 remained unused and not that useful. A variety of other little bignum
4540 tweaks and fixes have also been made continuing on from the audit (see
4544 *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
4545 associated ASN1, EVP and SSL functions and old ASN1 macros.
4548 *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
4549 and this should never fail. So the return value from the use of
4550 BN_set_word() (which can fail due to needless expansion) is now deprecated;
4551 if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
4554 *) BN_CTX_get() should return zero-valued bignums, providing the same
4555 initialised value as BN_new().
4556 [Geoff Thorpe, suggested by Ulf Möller]
4558 *) Support for inhibitAnyPolicy certificate extension.
4561 *) An audit of the BIGNUM code is underway, for which debugging code is
4562 enabled when BN_DEBUG is defined. This makes stricter enforcements on what
4563 is considered valid when processing BIGNUMs, and causes execution to
4564 assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
4565 further steps are taken to deliberately pollute unused data in BIGNUM
4566 structures to try and expose faulty code further on. For now, openssl will
4567 (in its default mode of operation) continue to tolerate the inconsistent
4568 forms that it has tolerated in the past, but authors and packagers should
4569 consider trying openssl and their own applications when compiled with
4570 these debugging symbols defined. It will help highlight potential bugs in
4571 their own code, and will improve the test coverage for OpenSSL itself. At
4572 some point, these tighter rules will become openssl's default to improve
4573 maintainability, though the assert()s and other overheads will remain only
4574 in debugging configurations. See bn.h for more details.
4575 [Geoff Thorpe, Nils Larsch, Ulf Möller]
4577 *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
4578 that can only be obtained through BN_CTX_new() (which implicitly
4579 initialises it). The presence of this function only made it possible
4580 to overwrite an existing structure (and cause memory leaks).
4583 *) Because of the callback-based approach for implementing LHASH as a
4584 template type, lh_insert() adds opaque objects to hash-tables and
4585 lh_doall() or lh_doall_arg() are typically used with a destructor callback
4586 to clean up those corresponding objects before destroying the hash table
4587 (and losing the object pointers). So some over-zealous constifications in
4588 LHASH have been relaxed so that lh_insert() does not take (nor store) the
4589 objects as "const" and the lh_doall[_arg] callback wrappers are not
4590 prototyped to have "const" restrictions on the object pointers they are
4591 given (and so aren't required to cast them away any more).
4594 *) The tmdiff.h API was so ugly and minimal that our own timing utility
4595 (speed) prefers to use its own implementation. The two implementations
4596 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
4597 its object type properly exposed (MS_TM) instead of casting to/from "char
4598 *". This may still change yet if someone realises MS_TM and "ms_time_***"
4599 aren't necessarily the greatest nomenclatures - but this is what was used
4600 internally to the implementation so I've used that for now.
4603 *) Ensure that deprecated functions do not get compiled when
4604 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
4605 the self-tests were still using deprecated key-generation functions so
4606 these have been updated also.
4609 *) Reorganise PKCS#7 code to separate the digest location functionality
4610 into PKCS7_find_digest(), digest addition into PKCS7_bio_add_digest().
4611 New function PKCS7_set_digest() to set the digest type for PKCS#7
4612 digestedData type. Add additional code to correctly generate the
4613 digestedData type and add support for this type in PKCS7 initialization
4617 *) New function PKCS7_set0_type_other() this initializes a PKCS7
4618 structure of type "other".
4621 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
4622 sure the loop does correctly stop and breaking ("division by zero")
4623 modulus operations are not performed. The (pre-generated) prime
4624 table crypto/bn/bn_prime.h was already correct, but it could not be
4625 re-generated on some platforms because of the "division by zero"
4626 situation in the script.
4627 [Ralf S. Engelschall]
4629 *) Update support for ECC-based TLS ciphersuites according to
4630 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
4631 SHA-1 now is only used for "small" curves (where the
4632 representation of a field element takes up to 24 bytes); for
4633 larger curves, the field element resulting from ECDH is directly
4634 used as premaster secret.
4635 [Douglas Stebila (Sun Microsystems Laboratories)]
4637 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
4638 curve secp160r1 to the tests.
4639 [Douglas Stebila (Sun Microsystems Laboratories)]
4641 *) Add the possibility to load symbols globally with DSO.
4642 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
4644 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
4645 control of the error stack.
4648 *) Add support for STORE in ENGINE.
4651 *) Add the STORE type. The intention is to provide a common interface
4652 to certificate and key stores, be they simple file-based stores, or
4653 HSM-type store, or LDAP stores, or...
4654 NOTE: The code is currently UNTESTED and isn't really used anywhere.
4657 *) Add a generic structure called OPENSSL_ITEM. This can be used to
4658 pass a list of arguments to any function as well as provide a way
4659 for a function to pass data back to the caller.
4662 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
4663 works like BUF_strdup() but can be used to duplicate a portion of
4664 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
4668 *) Add the function sk_find_ex() which works like sk_find(), but will
4669 return an index to an element even if an exact match couldn't be
4670 found. The index is guaranteed to point at the element where the
4671 searched-for key would be inserted to preserve sorting order.
4674 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
4675 takes an extra flags argument for optional functionality. Currently,
4676 the following flags are defined:
4678 OBJ_BSEARCH_VALUE_ON_NOMATCH
4679 This one gets OBJ_bsearch_ex() to return a pointer to the first
4680 element where the comparing function returns a negative or zero
4683 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
4684 This one gets OBJ_bsearch_ex() to return a pointer to the first
4685 element where the comparing function returns zero. This is useful
4686 if there are more than one element where the comparing function
4690 *) Make it possible to create self-signed certificates with 'openssl ca'
4691 in such a way that the self-signed certificate becomes part of the
4692 CA database and uses the same mechanisms for serial number generation
4693 as all other certificate signing. The new flag '-selfsign' enables
4694 this functionality. Adapt CA.sh and CA.pl.in.
4697 *) Add functionality to check the public key of a certificate request
4698 against a given private. This is useful to check that a certificate
4699 request can be signed by that key (self-signing).
4702 *) Make it possible to have multiple active certificates with the same
4703 subject in the CA index file. This is done only if the keyword
4704 'unique_subject' is set to 'no' in the main CA section (default
4705 if 'CA_default') of the configuration file. The value is saved
4706 with the database itself in a separate index attribute file,
4707 named like the index file with '.attr' appended to the name.
4710 *) Generate muti valued AVAs using '+' notation in config files for
4714 *) Support for nameConstraints certificate extension.
4717 *) Support for policyConstraints certificate extension.
4720 *) Support for policyMappings certificate extension.
4723 *) Make sure the default DSA_METHOD implementation only uses its
4724 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
4725 and change its own handlers to be NULL so as to remove unnecessary
4726 indirection. This lets alternative implementations fallback to the
4727 default implementation more easily.
4730 *) Support for directoryName in GeneralName related extensions
4734 *) Make it possible to link applications using Makefile.shared.
4735 Make that possible even when linking against static libraries!
4738 *) Support for single pass processing for S/MIME signing. This now
4739 means that S/MIME signing can be done from a pipe, in addition
4740 cleartext signing (multipart/signed type) is effectively streaming
4741 and the signed data does not need to be all held in memory.
4743 This is done with a new flag PKCS7_STREAM. When this flag is set
4744 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
4745 is done after the data is output (and digests calculated) in
4746 SMIME_write_PKCS7().
4749 *) Add full support for -rpath/-R, both in shared libraries and
4750 applications, at least on the platforms where it's known how
4754 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
4755 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
4756 will now compute a table of multiples of the generator that
4757 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
4758 faster (notably in the case of a single point multiplication,
4759 scalar * generator).
4760 [Nils Larsch, Bodo Moeller]
4762 *) IPv6 support for certificate extensions. The various extensions
4763 which use the IP:a.b.c.d can now take IPv6 addresses using the
4764 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
4768 *) Added an ENGINE that implements RSA by performing private key
4769 exponentiations with the GMP library. The conversions to and from
4770 GMP's mpz_t format aren't optimised nor are any montgomery forms
4771 cached, and on x86 it appears OpenSSL's own performance has caught up.
4772 However there are likely to be other architectures where GMP could
4773 provide a boost. This ENGINE is not built in by default, but it can be
4774 specified at Configure time and should be accompanied by the necessary
4775 linker additions, eg;
4776 ./config -DOPENSSL_USE_GMP -lgmp
4779 *) "openssl engine" will not display ENGINE/DSO load failure errors when
4780 testing availability of engines with "-t" - the old behaviour is
4781 produced by increasing the feature's verbosity with "-tt".
4784 *) ECDSA routines: under certain error conditions uninitialized BN objects
4785 could be freed. Solution: make sure initialization is performed early
4786 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
4790 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
4791 and DH_METHOD (eg. by ENGINE implementations) to override the normal
4792 software implementations. For DSA and DH, parameter generation can
4793 also be overriden by providing the appropriate method callbacks.
4796 *) Change the "progress" mechanism used in key-generation and
4797 primality testing to functions that take a new BN_GENCB pointer in
4798 place of callback/argument pairs. The new API functions have "_ex"
4799 postfixes and the older functions are reimplemented as wrappers for
4800 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
4801 declarations of the old functions to help (graceful) attempts to
4802 migrate to the new functions. Also, the new key-generation API
4803 functions operate on a caller-supplied key-structure and return
4804 success/failure rather than returning a key or NULL - this is to
4805 help make "keygen" another member function of RSA_METHOD etc.
4807 Example for using the new callback interface:
4809 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
4813 BN_GENCB_set(&my_cb, my_callback, my_arg);
4815 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
4816 /* For the meaning of a, b in calls to my_callback(), see the
4817 * documentation of the function that calls the callback.
4818 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
4819 * my_callback should return 1 if it wants BN_is_prime_ex()
4820 * to continue, or 0 to stop.
4825 *) Change the ZLIB compression method to be stateful, and make it
4826 available to TLS with the number defined in
4827 draft-ietf-tls-compression-04.txt.
4830 *) Add the ASN.1 structures and functions for CertificatePair, which
4831 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
4833 CertificatePair ::= SEQUENCE {
4834 forward [0] Certificate OPTIONAL,
4835 reverse [1] Certificate OPTIONAL,
4836 -- at least one of the pair shall be present -- }
4838 Also implement the PEM functions to read and write certificate
4839 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
4841 This needed to be defined, mostly for the sake of the LDAP
4842 attribute crossCertificatePair, but may prove useful elsewhere as
4846 *) Make it possible to inhibit symlinking of shared libraries in
4847 Makefile.shared, for Cygwin's sake.
4850 *) Extend the BIGNUM API by creating a function
4851 void BN_set_negative(BIGNUM *a, int neg);
4852 and a macro that behave like
4853 int BN_is_negative(const BIGNUM *a);
4855 to avoid the need to access 'a->neg' directly in applications.
4858 *) Implement fast modular reduction for pseudo-Mersenne primes
4859 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
4860 EC_GROUP_new_curve_GFp() will now automatically use this
4862 [Nils Larsch <nla@trustcenter.de>]
4864 *) Add new lock type (CRYPTO_LOCK_BN).
4867 *) Change the ENGINE framework to automatically load engines
4868 dynamically from specific directories unless they could be
4869 found to already be built in or loaded. Move all the
4870 current engines except for the cryptodev one to a new
4872 The engines in engines/ are built as shared libraries if
4873 the "shared" options was given to ./Configure or ./config.
4874 Otherwise, they are inserted in libcrypto.a.
4875 /usr/local/ssl/engines is the default directory for dynamic
4876 engines, but that can be overriden at configure time through
4877 the usual use of --prefix and/or --openssldir, and at run
4878 time with the environment variable OPENSSL_ENGINES.
4879 [Geoff Thorpe and Richard Levitte]
4881 *) Add Makefile.shared, a helper makefile to build shared
4882 libraries. Adapt Makefile.org.
4885 *) Add version info to Win32 DLLs.
4886 [Peter 'Luna' Runestig" <peter@runestig.com>]
4888 *) Add new 'medium level' PKCS#12 API. Certificates and keys
4889 can be added using this API to created arbitrary PKCS#12
4890 files while avoiding the low level API.
4892 New options to PKCS12_create(), key or cert can be NULL and
4893 will then be omitted from the output file. The encryption
4894 algorithm NIDs can be set to -1 for no encryption, the mac
4895 iteration count can be set to 0 to omit the mac.
4897 Enhance pkcs12 utility by making the -nokeys and -nocerts
4898 options work when creating a PKCS#12 file. New option -nomac
4899 to omit the mac, NONE can be set for an encryption algorithm.
4900 New code is modified to use the enhanced PKCS12_create()
4901 instead of the low level API.
4904 *) Extend ASN1 encoder to support indefinite length constructed
4905 encoding. This can output sequences tags and octet strings in
4906 this form. Modify pk7_asn1.c to support indefinite length
4907 encoding. This is experimental and needs additional code to
4908 be useful, such as an ASN1 bio and some enhanced streaming
4911 Extend template encode functionality so that tagging is passed
4912 down to the template encoder.
4915 *) Let 'openssl req' fail if an argument to '-newkey' is not
4916 recognized instead of using RSA as a default.
4919 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
4920 As these are not official, they are not included in "ALL";
4921 the "ECCdraft" ciphersuite group alias can be used to select them.
4922 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
4924 *) Add ECDH engine support.
4925 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
4927 *) Add ECDH in new directory crypto/ecdh/.
4928 [Douglas Stebila (Sun Microsystems Laboratories)]
4930 *) Let BN_rand_range() abort with an error after 100 iterations
4931 without success (which indicates a broken PRNG).
4934 *) Change BN_mod_sqrt() so that it verifies that the input value
4935 is really the square of the return value. (Previously,
4936 BN_mod_sqrt would show GIGO behaviour.)
4939 *) Add named elliptic curves over binary fields from X9.62, SECG,
4940 and WAP/WTLS; add OIDs that were still missing.
4942 [Sheueling Chang Shantz and Douglas Stebila
4943 (Sun Microsystems Laboratories)]
4945 *) Extend the EC library for elliptic curves over binary fields
4946 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
4949 EC_GF2m_simple_method
4953 EC_GROUP_new_curve_GF2m
4954 EC_GROUP_set_curve_GF2m
4955 EC_GROUP_get_curve_GF2m
4956 EC_POINT_set_affine_coordinates_GF2m
4957 EC_POINT_get_affine_coordinates_GF2m
4958 EC_POINT_set_compressed_coordinates_GF2m
4960 Point compression for binary fields is disabled by default for
4961 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
4964 As binary polynomials are represented as BIGNUMs, various members
4965 of the EC_GROUP and EC_POINT data structures can be shared
4966 between the implementations for prime fields and binary fields;
4967 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
4968 are essentially identical to their ..._GFp counterparts.
4969 (For simplicity, the '..._GFp' prefix has been dropped from
4970 various internal method names.)
4972 An internal 'field_div' method (similar to 'field_mul' and
4973 'field_sqr') has been added; this is used only for binary fields.
4975 [Sheueling Chang Shantz and Douglas Stebila
4976 (Sun Microsystems Laboratories)]
4978 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
4979 through methods ('mul', 'precompute_mult').
4981 The generic implementations (now internally called 'ec_wNAF_mul'
4982 and 'ec_wNAF_precomputed_mult') remain the default if these
4983 methods are undefined.
4985 [Sheueling Chang Shantz and Douglas Stebila
4986 (Sun Microsystems Laboratories)]
4988 *) New function EC_GROUP_get_degree, which is defined through
4989 EC_METHOD. For curves over prime fields, this returns the bit
4990 length of the modulus.
4992 [Sheueling Chang Shantz and Douglas Stebila
4993 (Sun Microsystems Laboratories)]
4995 *) New functions EC_GROUP_dup, EC_POINT_dup.
4996 (These simply call ..._new and ..._copy).
4998 [Sheueling Chang Shantz and Douglas Stebila
4999 (Sun Microsystems Laboratories)]
5001 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
5002 Polynomials are represented as BIGNUMs (where the sign bit is not
5003 used) in the following functions [macros]:
5006 BN_GF2m_sub [= BN_GF2m_add]
5007 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
5008 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
5009 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
5011 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
5012 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
5013 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
5014 BN_GF2m_cmp [= BN_ucmp]
5016 (Note that only the 'mod' functions are actually for fields GF(2^m).
5017 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
5019 For some functions, an the irreducible polynomial defining a
5020 field can be given as an 'unsigned int[]' with strictly
5021 decreasing elements giving the indices of those bits that are set;
5022 i.e., p[] represents the polynomial
5023 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
5025 p[0] > p[1] > ... > p[k] = 0.
5026 This applies to the following functions:
5031 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
5032 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
5034 BN_GF2m_mod_sqrt_arr
5035 BN_GF2m_mod_solve_quad_arr
5039 Conversion can be performed by the following functions:
5044 bntest.c has additional tests for binary polynomial arithmetic.
5046 Two implementations for BN_GF2m_mod_div() are available.
5047 The default algorithm simply uses BN_GF2m_mod_inv() and
5048 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
5049 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
5050 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
5052 [Sheueling Chang Shantz and Douglas Stebila
5053 (Sun Microsystems Laboratories)]
5055 *) Add new error code 'ERR_R_DISABLED' that can be used when some
5056 functionality is disabled at compile-time.
5057 [Douglas Stebila <douglas.stebila@sun.com>]
5059 *) Change default behaviour of 'openssl asn1parse' so that more
5060 information is visible when viewing, e.g., a certificate:
5062 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
5063 mode the content of non-printable OCTET STRINGs is output in a
5064 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
5065 avoid the appearance of a printable string.
5066 [Nils Larsch <nla@trustcenter.de>]
5068 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
5070 EC_GROUP_set_asn1_flag()
5071 EC_GROUP_get_asn1_flag()
5072 EC_GROUP_set_point_conversion_form()
5073 EC_GROUP_get_point_conversion_form()
5074 These control ASN1 encoding details:
5075 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
5076 has been set to OPENSSL_EC_NAMED_CURVE.
5077 - Points are encoded in uncompressed form by default; options for
5078 asn1_for are as for point2oct, namely
5079 POINT_CONVERSION_COMPRESSED
5080 POINT_CONVERSION_UNCOMPRESSED
5081 POINT_CONVERSION_HYBRID
5083 Also add 'seed' and 'seed_len' members to EC_GROUP with access
5086 EC_GROUP_get0_seed()
5087 EC_GROUP_get_seed_len()
5088 This is used only for ASN1 purposes (so far).
5089 [Nils Larsch <nla@trustcenter.de>]
5091 *) Add 'field_type' member to EC_METHOD, which holds the NID
5092 of the appropriate field type OID. The new function
5093 EC_METHOD_get_field_type() returns this value.
5094 [Nils Larsch <nla@trustcenter.de>]
5099 EC_POINT_point2hex()
5100 EC_POINT_hex2point()
5101 providing useful interfaces to EC_POINT_point2oct() and
5102 EC_POINT_oct2point().
5103 [Nils Larsch <nla@trustcenter.de>]
5105 *) Change internals of the EC library so that the functions
5106 EC_GROUP_set_generator()
5107 EC_GROUP_get_generator()
5108 EC_GROUP_get_order()
5109 EC_GROUP_get_cofactor()
5110 are implemented directly in crypto/ec/ec_lib.c and not dispatched
5111 to methods, which would lead to unnecessary code duplication when
5112 adding different types of curves.
5113 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
5115 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
5116 arithmetic, and such that modified wNAFs are generated
5117 (which avoid length expansion in many cases).
5120 *) Add a function EC_GROUP_check_discriminant() (defined via
5121 EC_METHOD) that verifies that the curve discriminant is non-zero.
5123 Add a function EC_GROUP_check() that makes some sanity tests
5124 on a EC_GROUP, its generator and order. This includes
5125 EC_GROUP_check_discriminant().
5126 [Nils Larsch <nla@trustcenter.de>]
5128 *) Add ECDSA in new directory crypto/ecdsa/.
5130 Add applications 'openssl ecparam' and 'openssl ecdsa'
5131 (these are based on 'openssl dsaparam' and 'openssl dsa').
5133 ECDSA support is also included in various other files across the
5134 library. Most notably,
5135 - 'openssl req' now has a '-newkey ecdsa:file' option;
5136 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
5137 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
5138 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
5139 them suitable for ECDSA where domain parameters must be
5140 extracted before the specific public key;
5141 - ECDSA engine support has been added.
5142 [Nils Larsch <nla@trustcenter.de>]
5144 *) Include some named elliptic curves, and add OIDs from X9.62,
5145 SECG, and WAP/WTLS. Each curve can be obtained from the new
5147 EC_GROUP_new_by_curve_name(),
5148 and the list of available named curves can be obtained with
5149 EC_get_builtin_curves().
5150 Also add a 'curve_name' member to EC_GROUP objects, which can be
5152 EC_GROUP_set_curve_name()
5153 EC_GROUP_get_curve_name()
5154 [Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
5156 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
5157 was actually never needed) and in BN_mul(). The removal in BN_mul()
5158 required a small change in bn_mul_part_recursive() and the addition
5159 of the functions bn_cmp_part_words(), bn_sub_part_words() and
5160 bn_add_part_words(), which do the same thing as bn_cmp_words(),
5161 bn_sub_words() and bn_add_words() except they take arrays with
5165 Changes between 0.9.7l and 0.9.7m [23 Feb 2007]
5167 *) Cleanse PEM buffers before freeing them since they may contain
5169 [Benjamin Bennett <ben@psc.edu>]
5171 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
5172 a ciphersuite string such as "DEFAULT:RSA" cannot enable
5173 authentication-only ciphersuites.
5176 *) Since AES128 and AES256 share a single mask bit in the logic of
5177 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
5178 kludge to work properly if AES128 is available and AES256 isn't.
5181 *) Expand security boundary to match 1.1.1 module.
5184 *) Remove redundant features: hash file source, editing of test vectors
5185 modify fipsld to use external fips_premain.c signature.
5188 *) New perl script mkfipsscr.pl to create shell scripts or batch files to
5189 run algorithm test programs.
5192 *) Make algorithm test programs more tolerant of whitespace.
5195 *) Have SSL/TLS server implementation tolerate "mismatched" record
5196 protocol version while receiving ClientHello even if the
5197 ClientHello is fragmented. (The server can't insist on the
5198 particular protocol version it has chosen before the ServerHello
5199 message has informed the client about his choice.)
5202 *) Load error codes if they are not already present instead of using a
5203 static variable. This allows them to be cleanly unloaded and reloaded.
5206 Changes between 0.9.7k and 0.9.7l [28 Sep 2006]
5208 *) Introduce limits to prevent malicious keys being able to
5209 cause a denial of service. (CVE-2006-2940)
5210 [Steve Henson, Bodo Moeller]
5212 *) Fix ASN.1 parsing of certain invalid structures that can result
5213 in a denial of service. (CVE-2006-2937) [Steve Henson]
5215 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
5216 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
5218 *) Fix SSL client code which could crash if connecting to a
5219 malicious SSLv2 server. (CVE-2006-4343)
5220 [Tavis Ormandy and Will Drewry, Google Security Team]
5222 *) Change ciphersuite string processing so that an explicit
5223 ciphersuite selects this one ciphersuite (so that "AES256-SHA"
5224 will no longer include "AES128-SHA"), and any other similar
5225 ciphersuite (same bitmap) from *other* protocol versions (so that
5226 "RC4-MD5" will still include both the SSL 2.0 ciphersuite and the
5227 SSL 3.0/TLS 1.0 ciphersuite). This is a backport combining
5228 changes from 0.9.8b and 0.9.8d.
5231 Changes between 0.9.7j and 0.9.7k [05 Sep 2006]
5233 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
5234 (CVE-2006-4339) [Ben Laurie and Google Security Team]
5236 *) Change the Unix randomness entropy gathering to use poll() when
5237 possible instead of select(), since the latter has some
5238 undesirable limitations.
5239 [Darryl Miles via Richard Levitte and Bodo Moeller]
5241 *) Disable rogue ciphersuites:
5243 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
5244 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
5245 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
5247 The latter two were purportedly from
5248 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
5251 Also deactive the remaining ciphersuites from
5252 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
5253 unofficial, and the ID has long expired.
5256 *) Fix RSA blinding Heisenbug (problems sometimes occurred on
5257 dual-core machines) and other potential thread-safety issues.
5260 Changes between 0.9.7i and 0.9.7j [04 May 2006]
5262 *) Adapt fipsld and the build system to link against the validated FIPS
5263 module in FIPS mode.
5266 *) Fixes for VC++ 2005 build under Windows.
5269 *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
5270 from a Windows bash shell such as MSYS. It is autodetected from the
5271 "config" script when run from a VC++ environment. Modify standard VC++
5272 build to use fipscanister.o from the GNU make build.
5275 Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
5277 *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
5278 The value now differs depending on if you build for FIPS or not.
5279 BEWARE! A program linked with a shared FIPSed libcrypto can't be
5280 safely run with a non-FIPSed libcrypto, as it may crash because of
5281 the difference induced by this change.
5284 Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
5286 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
5287 (part of SSL_OP_ALL). This option used to disable the
5288 countermeasure against man-in-the-middle protocol-version
5289 rollback in the SSL 2.0 server implementation, which is a bad
5290 idea. (CVE-2005-2969)
5292 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
5293 for Information Security, National Institute of Advanced Industrial
5294 Science and Technology [AIST], Japan)]
5296 *) Minimal support for X9.31 signatures and PSS padding modes. This is
5297 mainly for FIPS compliance and not fully integrated at this stage.
5300 *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
5301 the exponentiation using a fixed-length exponent. (Otherwise,
5302 the information leaked through timing could expose the secret key
5303 after many signatures; cf. Bleichenbacher's attack on DSA with
5307 *) Make a new fixed-window mod_exp implementation the default for
5308 RSA, DSA, and DH private-key operations so that the sequence of
5309 squares and multiplies and the memory access pattern are
5310 independent of the particular secret key. This will mitigate
5311 cache-timing and potential related attacks.
5313 BN_mod_exp_mont_consttime() is the new exponentiation implementation,
5314 and this is automatically used by BN_mod_exp_mont() if the new flag
5315 BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
5316 will use this BN flag for private exponents unless the flag
5317 RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
5318 DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
5320 [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
5322 *) Change the client implementation for SSLv23_method() and
5323 SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
5324 Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
5325 (Previously, the SSL 2.0 backwards compatible Client Hello
5326 message format would be used even with SSL_OP_NO_SSLv2.)
5329 *) Add support for smime-type MIME parameter in S/MIME messages which some
5333 *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
5334 a threadsafe manner. Modify rsa code to use new function and add calls
5335 to dsa and dh code (which had race conditions before).
5338 *) Include the fixed error library code in the C error file definitions
5339 instead of fixing them up at runtime. This keeps the error code
5340 structures constant.
5343 Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
5345 [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
5348 *) Fixes for newer kerberos headers. NB: the casts are needed because
5349 the 'length' field is signed on one version and unsigned on another
5350 with no (?) obvious way to tell the difference, without these VC++
5351 complains. Also the "definition" of FAR (blank) is no longer included
5352 nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
5353 some needed definitions.
5356 *) Undo Cygwin change.
5359 *) Added support for proxy certificates according to RFC 3820.
5360 Because they may be a security thread to unaware applications,
5361 they must be explicitly allowed in run-time. See
5362 docs/HOWTO/proxy_certificates.txt for further information.
5365 Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
5367 *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
5368 server and client random values. Previously
5369 (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
5370 less random data when sizeof(time_t) > 4 (some 64 bit platforms).
5372 This change has negligible security impact because:
5374 1. Server and client random values still have 24 bytes of pseudo random
5377 2. Server and client random values are sent in the clear in the initial
5380 3. The master secret is derived using the premaster secret (48 bytes in
5381 size for static RSA ciphersuites) as well as client server and random
5384 The OpenSSL team would like to thank the UK NISCC for bringing this issue
5387 [Stephen Henson, reported by UK NISCC]
5389 *) Use Windows randomness collection on Cygwin.
5392 *) Fix hang in EGD/PRNGD query when communication socket is closed
5393 prematurely by EGD/PRNGD.
5394 [Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
5396 *) Prompt for pass phrases when appropriate for PKCS12 input format.
5399 *) Back-port of selected performance improvements from development
5400 branch, as well as improved support for PowerPC platforms.
5403 *) Add lots of checks for memory allocation failure, error codes to indicate
5404 failure and freeing up memory if a failure occurs.
5405 [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
5407 *) Add new -passin argument to dgst.
5410 *) Perform some character comparisons of different types in X509_NAME_cmp:
5411 this is needed for some certificates that reencode DNs into UTF8Strings
5412 (in violation of RFC3280) and can't or wont issue name rollover
5416 *) Make an explicit check during certificate validation to see that
5417 the CA setting in each certificate on the chain is correct. As a
5418 side effect always do the following basic checks on extensions,
5419 not just when there's an associated purpose to the check:
5421 - if there is an unhandled critical extension (unless the user
5422 has chosen to ignore this fault)
5423 - if the path length has been exceeded (if one is set at all)
5424 - that certain extensions fit the associated purpose (if one has
5428 Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
5430 *) Avoid a race condition when CRLs are checked in a multi threaded
5431 environment. This would happen due to the reordering of the revoked
5432 entries during signature checking and serial number lookup. Now the
5433 encoding is cached and the serial number sort performed under a lock.
5434 Add new STACK function sk_is_sorted().
5437 *) Add Delta CRL to the extension code.
5440 *) Various fixes to s3_pkt.c so alerts are sent properly.
5441 [David Holmes <d.holmes@f5.com>]
5443 *) Reduce the chances of duplicate issuer name and serial numbers (in
5444 violation of RFC3280) using the OpenSSL certificate creation utilities.
5445 This is done by creating a random 64 bit value for the initial serial
5446 number when a serial number file is created or when a self signed
5447 certificate is created using 'openssl req -x509'. The initial serial
5448 number file is created using 'openssl x509 -next_serial' in CA.pl
5449 rather than being initialized to 1.
5452 Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
5454 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
5455 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
5456 [Joe Orton, Steve Henson]
5458 *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
5460 [Joe Orton, Steve Henson]
5462 *) Make it possible to have multiple active certificates with the same
5463 subject in the CA index file. This is done only if the keyword
5464 'unique_subject' is set to 'no' in the main CA section (default
5465 if 'CA_default') of the configuration file. The value is saved
5466 with the database itself in a separate index attribute file,
5467 named like the index file with '.attr' appended to the name.
5470 *) X509 verify fixes. Disable broken certificate workarounds when
5471 X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
5472 keyUsage extension present. Don't accept CRLs with unhandled critical
5473 extensions: since verify currently doesn't process CRL extensions this
5474 rejects a CRL with *any* critical extensions. Add new verify error codes
5478 *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
5479 A clarification of RFC2560 will require the use of OCTET STRINGs and
5480 some implementations cannot handle the current raw format. Since OpenSSL
5481 copies and compares OCSP nonces as opaque blobs without any attempt at
5482 parsing them this should not create any compatibility issues.
5485 *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
5486 calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
5487 this HMAC (and other) operations are several times slower than OpenSSL
5491 *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
5492 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
5494 *) Use the correct content when signing type "other".
5497 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
5499 *) Fix various bugs revealed by running the NISCC test suite:
5501 Stop out of bounds reads in the ASN1 code when presented with
5502 invalid tags (CVE-2003-0543 and CVE-2003-0544).
5504 Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
5506 If verify callback ignores invalid public key errors don't try to check
5507 certificate signature with the NULL public key.
5511 *) New -ignore_err option in ocsp application to stop the server
5512 exiting on the first error in a request.
5515 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
5516 if the server requested one: as stated in TLS 1.0 and SSL 3.0
5520 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
5521 extra data after the compression methods not only for TLS 1.0
5522 but also for SSL 3.0 (as required by the specification).
5523 [Bodo Moeller; problem pointed out by Matthias Loepfe]
5525 *) Change X509_certificate_type() to mark the key as exported/exportable
5526 when it's 512 *bits* long, not 512 bytes.
5529 *) Change AES_cbc_encrypt() so it outputs exact multiple of
5530 blocks during encryption.
5533 *) Various fixes to base64 BIO and non blocking I/O. On write
5534 flushes were not handled properly if the BIO retried. On read
5535 data was not being buffered properly and had various logic bugs.
5536 This also affects blocking I/O when the data being decoded is a
5540 *) Various S/MIME bugfixes and compatibility changes:
5541 output correct application/pkcs7 MIME type if
5542 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
5543 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
5544 of files as .eml work). Correctly handle very long lines in MIME
5548 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
5550 *) Countermeasure against the Klima-Pokorny-Rosa extension of
5551 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
5552 a protocol version number mismatch like a decryption error
5553 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
5556 *) Turn on RSA blinding by default in the default implementation
5557 to avoid a timing attack. Applications that don't want it can call
5558 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
5559 They would be ill-advised to do so in most cases.
5560 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
5562 *) Change RSA blinding code so that it works when the PRNG is not
5563 seeded (in this case, the secret RSA exponent is abused as
5564 an unpredictable seed -- if it is not unpredictable, there
5565 is no point in blinding anyway). Make RSA blinding thread-safe
5566 by remembering the creator's thread ID in rsa->blinding and
5567 having all other threads use local one-time blinding factors
5568 (this requires more computation than sharing rsa->blinding, but
5569 avoids excessive locking; and if an RSA object is not shared
5570 between threads, blinding will still be very fast).
5573 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
5574 ENGINE as defaults for all supported algorithms irrespective of
5575 the 'flags' parameter. 'flags' is now honoured, so applications
5576 should make sure they are passing it correctly.
5579 *) Target "mingw" now allows native Windows code to be generated in
5580 the Cygwin environment as well as with the MinGW compiler.
5583 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
5585 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
5586 via timing by performing a MAC computation even if incorrect
5587 block cipher padding has been found. This is a countermeasure
5588 against active attacks where the attacker has to distinguish
5589 between bad padding and a MAC verification error. (CVE-2003-0078)
5591 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
5592 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
5593 Martin Vuagnoux (EPFL, Ilion)]
5595 *) Make the no-err option work as intended. The intention with no-err
5596 is not to have the whole error stack handling routines removed from
5597 libcrypto, it's only intended to remove all the function name and
5598 reason texts, thereby removing some of the footprint that may not
5599 be interesting if those errors aren't displayed anyway.
5601 NOTE: it's still possible for any application or module to have it's
5602 own set of error texts inserted. The routines are there, just not
5603 used by default when no-err is given.
5606 *) Add support for FreeBSD on IA64.
5607 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
5609 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
5610 Kerberos function mit_des_cbc_cksum(). Before this change,
5611 the value returned by DES_cbc_cksum() was like the one from
5612 mit_des_cbc_cksum(), except the bytes were swapped.
5613 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
5615 *) Allow an application to disable the automatic SSL chain building.
5616 Before this a rather primitive chain build was always performed in
5617 ssl3_output_cert_chain(): an application had no way to send the
5618 correct chain if the automatic operation produced an incorrect result.
5620 Now the chain builder is disabled if either:
5622 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
5624 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
5626 The reasoning behind this is that an application would not want the
5627 auto chain building to take place if extra chain certificates are
5628 present and it might also want a means of sending no additional
5629 certificates (for example the chain has two certificates and the
5633 *) Add the possibility to build without the ENGINE framework.
5634 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
5636 *) Under Win32 gmtime() can return NULL: check return value in
5637 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
5640 *) DSA routines: under certain error conditions uninitialized BN objects
5641 could be freed. Solution: make sure initialization is performed early
5642 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
5643 Nils Larsch <nla@trustcenter.de> via PR#459)
5646 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
5647 checked on reconnect on the client side, therefore session resumption
5648 could still fail with a "ssl session id is different" error. This
5649 behaviour is masked when SSL_OP_ALL is used due to
5650 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
5651 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
5652 followup to PR #377.
5655 *) IA-32 assembler support enhancements: unified ELF targets, support
5656 for SCO/Caldera platforms, fix for Cygwin shared build.
5659 *) Add support for FreeBSD on sparc64. As a consequence, support for
5660 FreeBSD on non-x86 processors is separate from x86 processors on
5661 the config script, much like the NetBSD support.
5662 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
5664 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
5666 [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
5669 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
5670 code (06) was taken as the first octet of the session ID and the last
5671 octet was ignored consequently. As a result SSLv2 client side session
5672 caching could not have worked due to the session ID mismatch between
5674 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
5678 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
5679 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
5683 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
5684 seems that in spite of existing for more than a year, many application
5685 author have done nothing to provide the necessary callbacks, which
5686 means that this particular engine will not work properly anywhere.
5687 This is a very unfortunate situation which forces us, in the name
5688 of usability, to give the hw_ncipher.c a static lock, which is part
5690 NOTE: This is for the 0.9.7 series ONLY. This hack will never
5691 appear in 0.9.8 or later. We EXPECT application authors to have
5692 dealt properly with this when 0.9.8 is released (unless we actually
5693 make such changes in the libcrypto locking code that changes will
5694 have to be made anyway).
5697 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
5698 octets have been read, EOF or an error occurs. Without this change
5699 some truncated ASN1 structures will not produce an error.
5702 *) Disable Heimdal support, since it hasn't been fully implemented.
5703 Still give the possibility to force the use of Heimdal, but with
5704 warnings and a request that patches get sent to openssl-dev.
5707 *) Add the VC-CE target, introduce the WINCE sysname, and add
5708 INSTALL.WCE and appropriate conditionals to make it build.
5709 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
5711 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
5712 cygssl-x.y.z.dll, where x, y and z are the major, minor and
5713 edit numbers of the version.
5714 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
5716 *) Introduce safe string copy and catenation functions
5717 (BUF_strlcpy() and BUF_strlcat()).
5718 [Ben Laurie (CHATS) and Richard Levitte]
5720 *) Avoid using fixed-size buffers for one-line DNs.
5721 [Ben Laurie (CHATS)]
5723 *) Add BUF_MEM_grow_clean() to avoid information leakage when
5724 resizing buffers containing secrets, and use where appropriate.
5725 [Ben Laurie (CHATS)]
5727 *) Avoid using fixed size buffers for configuration file location.
5728 [Ben Laurie (CHATS)]
5730 *) Avoid filename truncation for various CA files.
5731 [Ben Laurie (CHATS)]
5733 *) Use sizeof in preference to magic numbers.
5734 [Ben Laurie (CHATS)]
5736 *) Avoid filename truncation in cert requests.
5737 [Ben Laurie (CHATS)]
5739 *) Add assertions to check for (supposedly impossible) buffer
5741 [Ben Laurie (CHATS)]
5743 *) Don't cache truncated DNS entries in the local cache (this could
5744 potentially lead to a spoofing attack).
5745 [Ben Laurie (CHATS)]
5747 *) Fix various buffers to be large enough for hex/decimal
5748 representations in a platform independent manner.
5749 [Ben Laurie (CHATS)]
5751 *) Add CRYPTO_realloc_clean() to avoid information leakage when
5752 resizing buffers containing secrets, and use where appropriate.
5753 [Ben Laurie (CHATS)]
5755 *) Add BIO_indent() to avoid much slightly worrying code to do
5757 [Ben Laurie (CHATS)]
5759 *) Convert sprintf()/BIO_puts() to BIO_printf().
5760 [Ben Laurie (CHATS)]
5762 *) buffer_gets() could terminate with the buffer only half
5764 [Ben Laurie (CHATS)]
5766 *) Add assertions to prevent user-supplied crypto functions from
5767 overflowing internal buffers by having large block sizes, etc.
5768 [Ben Laurie (CHATS)]
5770 *) New OPENSSL_assert() macro (similar to assert(), but enabled
5772 [Ben Laurie (CHATS)]
5774 *) Eliminate unused copy of key in RC4.
5775 [Ben Laurie (CHATS)]
5777 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
5778 [Ben Laurie (CHATS)]
5780 *) Fix off-by-one error in EGD path.
5781 [Ben Laurie (CHATS)]
5783 *) If RANDFILE path is too long, ignore instead of truncating.
5784 [Ben Laurie (CHATS)]
5786 *) Eliminate unused and incorrectly sized X.509 structure
5788 [Ben Laurie (CHATS)]
5790 *) Eliminate unused and dangerous function knumber().
5791 [Ben Laurie (CHATS)]
5793 *) Eliminate unused and dangerous structure, KSSL_ERR.
5794 [Ben Laurie (CHATS)]
5796 *) Protect against overlong session ID context length in an encoded
5797 session object. Since these are local, this does not appear to be
5799 [Ben Laurie (CHATS)]
5801 *) Change from security patch (see 0.9.6e below) that did not affect
5802 the 0.9.6 release series:
5804 Remote buffer overflow in SSL3 protocol - an attacker could
5805 supply an oversized master key in Kerberos-enabled versions.
5807 [Ben Laurie (CHATS)]
5809 *) Change the SSL kerb5 codes to match RFC 2712.
5812 *) Make -nameopt work fully for req and add -reqopt switch.
5813 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
5815 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
5816 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
5818 *) Make sure tests can be performed even if the corresponding algorithms
5819 have been removed entirely. This was also the last step to make
5820 OpenSSL compilable with DJGPP under all reasonable conditions.
5821 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
5823 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
5824 to allow version independent disabling of normally unselected ciphers,
5825 which may be activated as a side-effect of selecting a single cipher.
5827 (E.g., cipher list string "RSA" enables ciphersuites that are left
5828 out of "ALL" because they do not provide symmetric encryption.
5829 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
5830 [Lutz Jaenicke, Bodo Moeller]
5832 *) Add appropriate support for separate platform-dependent build
5833 directories. The recommended way to make a platform-dependent
5834 build directory is the following (tested on Linux), maybe with
5837 # Place yourself outside of the OpenSSL source tree. In
5838 # this example, the environment variable OPENSSL_SOURCE
5839 # is assumed to contain the absolute OpenSSL source directory.
5840 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
5841 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
5842 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
5843 mkdir -p `dirname $F`
5844 ln -s $OPENSSL_SOURCE/$F $F
5847 To be absolutely sure not to disturb the source tree, a "make clean"
5848 is a good thing. If it isn't successful, don't worry about it,
5849 it probably means the source directory is very clean.
5852 *) Make sure any ENGINE control commands make local copies of string
5853 pointers passed to them whenever necessary. Otherwise it is possible
5854 the caller may have overwritten (or deallocated) the original string
5855 data when a later ENGINE operation tries to use the stored values.
5856 [Götz Babin-Ebell <babinebell@trustcenter.de>]
5858 *) Improve diagnostics in file reading and command-line digests.
5859 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
5861 *) Add AES modes CFB and OFB to the object database. Correct an
5862 error in AES-CFB decryption.
5865 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
5866 allows existing EVP_CIPHER_CTX structures to be reused after
5867 calling EVP_*Final(). This behaviour is used by encryption
5868 BIOs and some applications. This has the side effect that
5869 applications must explicitly clean up cipher contexts with
5870 EVP_CIPHER_CTX_cleanup() or they will leak memory.
5873 *) Check the values of dna and dnb in bn_mul_recursive before calling
5874 bn_mul_comba (a non zero value means the a or b arrays do not contain
5875 n2 elements) and fallback to bn_mul_normal if either is not zero.
5878 *) Fix escaping of non-ASCII characters when using the -subj option
5879 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
5882 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
5883 form for "surname", serialNumber has no short form.
5884 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
5885 therefore remove "mail" short name for "internet 7".
5886 The OID for unique identifiers in X509 certificates is
5887 x500UniqueIdentifier, not uniqueIdentifier.
5888 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
5891 *) Add an "init" command to the ENGINE config module and auto initialize
5892 ENGINEs. Without any "init" command the ENGINE will be initialized
5893 after all ctrl commands have been executed on it. If init=1 the
5894 ENGINE is initailized at that point (ctrls before that point are run
5895 on the uninitialized ENGINE and after on the initialized one). If
5896 init=0 then the ENGINE will not be iniatialized at all.
5899 *) Fix the 'app_verify_callback' interface so that the user-defined
5900 argument is actually passed to the callback: In the
5901 SSL_CTX_set_cert_verify_callback() prototype, the callback
5902 declaration has been changed from
5905 int (*cb)(X509_STORE_CTX *,void *);
5906 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
5907 i=s->ctx->app_verify_callback(&ctx)
5908 has been changed into
5909 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
5911 To update applications using SSL_CTX_set_cert_verify_callback(),
5912 a dummy argument can be added to their callback functions.
5913 [D. K. Smetters <smetters@parc.xerox.com>]
5915 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
5916 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
5918 *) Add and OPENSSL_LOAD_CONF define which will cause
5919 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
5920 This allows older applications to transparently support certain
5921 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
5922 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
5923 load the config file and OPENSSL_add_all_algorithms_conf() which will
5924 always load it have also been added.
5927 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
5928 Adjust NIDs and EVP layer.
5929 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
5931 *) Config modules support in openssl utility.
5933 Most commands now load modules from the config file,
5934 though in a few (such as version) this isn't done
5935 because it couldn't be used for anything.
5937 In the case of ca and req the config file used is
5938 the same as the utility itself: that is the -config
5939 command line option can be used to specify an
5943 *) Move default behaviour from OPENSSL_config(). If appname is NULL
5944 use "openssl_conf" if filename is NULL use default openssl config file.
5947 *) Add an argument to OPENSSL_config() to allow the use of an alternative
5948 config section name. Add a new flag to tolerate a missing config file
5949 and move code to CONF_modules_load_file().
5952 *) Support for crypto accelerator cards from Accelerated Encryption
5953 Processing, www.aep.ie. (Use engine 'aep')
5954 The support was copied from 0.9.6c [engine] and adapted/corrected
5955 to work with the new engine framework.
5956 [AEP Inc. and Richard Levitte]
5958 *) Support for SureWare crypto accelerator cards from Baltimore
5959 Technologies. (Use engine 'sureware')
5960 The support was copied from 0.9.6c [engine] and adapted
5961 to work with the new engine framework.
5964 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
5965 make the newer ENGINE framework commands for the CHIL engine work.
5966 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
5968 *) Make it possible to produce shared libraries on ReliantUNIX.
5969 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
5971 *) Add the configuration target debug-linux-ppro.
5972 Make 'openssl rsa' use the general key loading routines
5973 implemented in apps.c, and make those routines able to
5974 handle the key format FORMAT_NETSCAPE and the variant
5976 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
5978 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
5979 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
5981 *) Add -keyform to rsautl, and document -engine.
5982 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
5984 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
5985 BIO_R_NO_SUCH_FILE error code rather than the generic
5986 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
5989 *) Add new functions
5991 ERR_peek_last_error_line
5992 ERR_peek_last_error_line_data.
5993 These are similar to
5996 ERR_peek_error_line_data,
5997 but report on the latest error recorded rather than the first one
5998 still in the error queue.
5999 [Ben Laurie, Bodo Moeller]
6001 *) default_algorithms option in ENGINE config module. This allows things
6003 default_algorithms = ALL
6004 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
6007 *) Preliminary ENGINE config module.
6010 *) New experimental application configuration code.
6013 *) Change the AES code to follow the same name structure as all other
6014 symmetric ciphers, and behave the same way. Move everything to
6015 the directory crypto/aes, thereby obsoleting crypto/rijndael.
6016 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
6018 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
6019 [Ben Laurie and Theo de Raadt]
6021 *) Add option to output public keys in req command.
6022 [Massimiliano Pala madwolf@openca.org]
6024 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
6025 (up to about 10% better than before for P-192 and P-224).
6028 *) New functions/macros
6030 SSL_CTX_set_msg_callback(ctx, cb)
6031 SSL_CTX_set_msg_callback_arg(ctx, arg)
6032 SSL_set_msg_callback(ssl, cb)
6033 SSL_set_msg_callback_arg(ssl, arg)
6035 to request calling a callback function
6037 void cb(int write_p, int version, int content_type,
6038 const void *buf, size_t len, SSL *ssl, void *arg)
6040 whenever a protocol message has been completely received
6041 (write_p == 0) or sent (write_p == 1). Here 'version' is the
6042 protocol version according to which the SSL library interprets
6043 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
6044 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
6045 the content type as defined in the SSL 3.0/TLS 1.0 protocol
6046 specification (change_cipher_spec(20), alert(21), handshake(22)).
6047 'buf' and 'len' point to the actual message, 'ssl' to the
6048 SSL object, and 'arg' is the application-defined value set by
6049 SSL[_CTX]_set_msg_callback_arg().
6051 'openssl s_client' and 'openssl s_server' have new '-msg' options
6052 to enable a callback that displays all protocol messages.
6055 *) Change the shared library support so shared libraries are built as
6056 soon as the corresponding static library is finished, and thereby get
6057 openssl and the test programs linked against the shared library.
6058 This still only happens when the keyword "shard" has been given to
6059 the configuration scripts.
6061 NOTE: shared library support is still an experimental thing, and
6062 backward binary compatibility is still not guaranteed.
6063 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
6065 *) Add support for Subject Information Access extension.
6066 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
6068 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
6069 additional bytes when new memory had to be allocated, not just
6070 when reusing an existing buffer.
6073 *) New command line and configuration option 'utf8' for the req command.
6074 This allows field values to be specified as UTF8 strings.
6077 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
6078 runs for the former and machine-readable output for the latter.
6081 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
6082 of the e-mail address in the DN (i.e., it will go into a certificate
6083 extension only). The new configuration file option 'email_in_dn = no'
6084 has the same effect.
6085 [Massimiliano Pala madwolf@openca.org]
6087 *) Change all functions with names starting with des_ to be starting
6088 with DES_ instead. Add wrappers that are compatible with libdes,
6089 but are named _ossl_old_des_*. Finally, add macros that map the
6090 des_* symbols to the corresponding _ossl_old_des_* if libdes
6091 compatibility is desired. If OpenSSL 0.9.6c compatibility is
6092 desired, the des_* symbols will be mapped to DES_*, with one
6095 Since we provide two compatibility mappings, the user needs to
6096 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
6097 compatibility is desired. The default (i.e., when that macro
6098 isn't defined) is OpenSSL 0.9.6c compatibility.
6100 There are also macros that enable and disable the support of old
6101 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
6102 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
6103 are defined, the default will apply: to support the old des routines.
6105 In either case, one must include openssl/des.h to get the correct
6106 definitions. Do not try to just include openssl/des_old.h, that
6109 NOTE: This is a major break of an old API into a new one. Software
6110 authors are encouraged to switch to the DES_ style functions. Some
6111 time in the future, des_old.h and the libdes compatibility functions
6112 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
6113 default), and then completely removed.
6116 *) Test for certificates which contain unsupported critical extensions.
6117 If such a certificate is found during a verify operation it is
6118 rejected by default: this behaviour can be overridden by either
6119 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
6120 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
6121 X509_supported_extension() has also been added which returns 1 if a
6122 particular extension is supported.
6125 *) Modify the behaviour of EVP cipher functions in similar way to digests
6126 to retain compatibility with existing code.
6129 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
6130 compatibility with existing code. In particular the 'ctx' parameter does
6131 not have to be to be initialized before the call to EVP_DigestInit() and
6132 it is tidied up after a call to EVP_DigestFinal(). New function
6133 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
6134 EVP_MD_CTX_copy() changed to not require the destination to be
6135 initialized valid and new function EVP_MD_CTX_copy_ex() added which
6136 requires the destination to be valid.
6138 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
6139 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
6142 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
6143 so that complete 'Handshake' protocol structures are kept in memory
6144 instead of overwriting 'msg_type' and 'length' with 'body' data.
6147 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
6148 [Massimo Santin via Richard Levitte]
6150 *) Major restructuring to the underlying ENGINE code. This includes
6151 reduction of linker bloat, separation of pure "ENGINE" manipulation
6152 (initialisation, etc) from functionality dealing with implementations
6153 of specific crypto iterfaces. This change also introduces integrated
6154 support for symmetric ciphers and digest implementations - so ENGINEs
6155 can now accelerate these by providing EVP_CIPHER and EVP_MD
6156 implementations of their own. This is detailed in crypto/engine/README
6157 as it couldn't be adequately described here. However, there are a few
6158 API changes worth noting - some RSA, DSA, DH, and RAND functions that
6159 were changed in the original introduction of ENGINE code have now
6160 reverted back - the hooking from this code to ENGINE is now a good
6161 deal more passive and at run-time, operations deal directly with
6162 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
6163 dereferencing through an ENGINE pointer any more. Also, the ENGINE
6164 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
6165 they were not being used by the framework as there is no concept of a
6166 BIGNUM_METHOD and they could not be generalised to the new
6167 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
6168 ENGINE_cpy() has been removed as it cannot be consistently defined in
6172 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
6175 *) Change mkdef.pl to sort symbols that get the same entry number,
6176 and make sure the automatically generated functions ERR_load_*
6177 become part of libeay.num as well.
6180 *) New function SSL_renegotiate_pending(). This returns true once
6181 renegotiation has been requested (either SSL_renegotiate() call
6182 or HelloRequest/ClientHello received from the peer) and becomes
6183 false once a handshake has been completed.
6184 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
6185 sends a HelloRequest, but does not ensure that a handshake takes
6186 place. SSL_renegotiate_pending() is useful for checking if the
6187 client has followed the request.)
6190 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
6191 By default, clients may request session resumption even during
6192 renegotiation (if session ID contexts permit); with this option,
6193 session resumption is possible only in the first handshake.
6195 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
6196 more bits available for options that should not be part of
6197 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
6200 *) Add some demos for certificate and certificate request creation.
6203 *) Make maximum certificate chain size accepted from the peer application
6204 settable (SSL*_get/set_max_cert_list()), as proposed by
6205 "Douglas E. Engert" <deengert@anl.gov>.
6208 *) Add support for shared libraries for Unixware-7
6209 (Boyd Lynn Gerber <gerberb@zenez.com>).
6212 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
6213 be done prior to destruction. Use this to unload error strings from
6214 ENGINEs that load their own error strings. NB: This adds two new API
6215 functions to "get" and "set" this destroy handler in an ENGINE.
6218 *) Alter all existing ENGINE implementations (except "openssl" and
6219 "openbsd") to dynamically instantiate their own error strings. This
6220 makes them more flexible to be built both as statically-linked ENGINEs
6221 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
6222 Also, add stub code to each that makes building them as self-contained
6223 shared-libraries easier (see README.ENGINE).
6226 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
6227 implementations into applications that are completely implemented in
6228 self-contained shared-libraries. The "dynamic" ENGINE exposes control
6229 commands that can be used to configure what shared-library to load and
6230 to control aspects of the way it is handled. Also, made an update to
6231 the README.ENGINE file that brings its information up-to-date and
6232 provides some information and instructions on the "dynamic" ENGINE
6233 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
6236 *) Make it possible to unload ranges of ERR strings with a new
6237 "ERR_unload_strings" function.
6240 *) Add a copy() function to EVP_MD.
6243 *) Make EVP_MD routines take a context pointer instead of just the
6244 md_data void pointer.
6247 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
6248 that the digest can only process a single chunk of data
6249 (typically because it is provided by a piece of
6250 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
6251 is only going to provide a single chunk of data, and hence the
6252 framework needn't accumulate the data for oneshot drivers.
6255 *) As with "ERR", make it possible to replace the underlying "ex_data"
6256 functions. This change also alters the storage and management of global
6257 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
6258 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
6259 index counters. The API functions that use this state have been changed
6260 to take a "class_index" rather than pointers to the class's local STACK
6261 and counter, and there is now an API function to dynamically create new
6262 classes. This centralisation allows us to (a) plug a lot of the
6263 thread-safety problems that existed, and (b) makes it possible to clean
6264 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
6265 such data would previously have always leaked in application code and
6266 workarounds were in place to make the memory debugging turn a blind eye
6267 to it. Application code that doesn't use this new function will still
6268 leak as before, but their memory debugging output will announce it now
6269 rather than letting it slide.
6271 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
6272 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
6273 has a return value to indicate success or failure.
6276 *) Make it possible to replace the underlying "ERR" functions such that the
6277 global state (2 LHASH tables and 2 locks) is only used by the "default"
6278 implementation. This change also adds two functions to "get" and "set"
6279 the implementation prior to it being automatically set the first time
6280 any other ERR function takes place. Ie. an application can call "get",
6281 pass the return value to a module it has just loaded, and that module
6282 can call its own "set" function using that value. This means the
6283 module's "ERR" operations will use (and modify) the error state in the
6284 application and not in its own statically linked copy of OpenSSL code.
6287 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
6288 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
6289 the operation, and provides a more encapsulated way for external code
6290 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
6291 to use these functions rather than manually incrementing the counts.
6293 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
6296 *) Add EVP test program.
6299 *) Add symmetric cipher support to ENGINE. Expect the API to change!
6302 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
6303 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
6304 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
6305 These allow a CRL to be built without having to access X509_CRL fields
6306 directly. Modify 'ca' application to use new functions.
6309 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
6310 bug workarounds. Rollback attack detection is a security feature.
6311 The problem will only arise on OpenSSL servers when TLSv1 is not
6312 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
6313 Software authors not wanting to support TLSv1 will have special reasons
6314 for their choice and can explicitly enable this option.
6315 [Bodo Moeller, Lutz Jaenicke]
6317 *) Rationalise EVP so it can be extended: don't include a union of
6318 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
6319 (similar to those existing for EVP_CIPHER_CTX).
6324 EVP_MD_CTX_init(&md); /* new function call */
6325 EVP_DigestInit(&md, EVP_sha1());
6326 EVP_DigestUpdate(&md, in, len);
6327 EVP_DigestFinal(&md, out, NULL);
6328 EVP_MD_CTX_cleanup(&md); /* new function call */
6332 *) Make DES key schedule conform to the usual scheme, as well as
6333 correcting its structure. This means that calls to DES functions
6334 now have to pass a pointer to a des_key_schedule instead of a
6335 plain des_key_schedule (which was actually always a pointer
6338 des_key_schedule ks;
6340 des_set_key_checked(..., &ks);
6341 des_ncbc_encrypt(..., &ks, ...);
6343 (Note that a later change renames 'des_...' into 'DES_...'.)
6346 *) Initial reduction of linker bloat: the use of some functions, such as
6347 PEM causes large amounts of unused functions to be linked in due to
6348 poor organisation. For example pem_all.c contains every PEM function
6349 which has a knock on effect of linking in large amounts of (unused)
6350 ASN1 code. Grouping together similar functions and splitting unrelated
6351 functions prevents this.
6354 *) Cleanup of EVP macros.
6357 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
6358 correct _ecb suffix.
6361 *) Add initial OCSP responder support to ocsp application. The
6362 revocation information is handled using the text based index
6363 use by the ca application. The responder can either handle
6364 requests generated internally, supplied in files (for example
6365 via a CGI script) or using an internal minimal server.
6368 *) Add configuration choices to get zlib compression for TLS.
6371 *) Changes to Kerberos SSL for RFC 2712 compliance:
6372 1. Implemented real KerberosWrapper, instead of just using
6373 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
6374 2. Implemented optional authenticator field of KerberosWrapper.
6376 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
6377 and authenticator structs; see crypto/krb5/.
6379 Generalized Kerberos calls to support multiple Kerberos libraries.
6380 [Vern Staats <staatsvr@asc.hpc.mil>,
6381 Jeffrey Altman <jaltman@columbia.edu>
6382 via Richard Levitte]
6384 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
6385 already does with RSA. testdsa.h now has 'priv_key/pub_key'
6386 values for each of the key sizes rather than having just
6387 parameters (and 'speed' generating keys each time).
6390 *) Speed up EVP routines.
6393 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
6394 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
6395 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
6396 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
6398 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
6399 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
6400 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
6403 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
6405 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
6408 *) Added the OS2-EMX target.
6409 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
6411 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
6412 to support NCONF routines in extension code. New function CONF_set_nconf()
6413 to allow functions which take an NCONF to also handle the old LHASH
6414 structure: this means that the old CONF compatible routines can be
6415 retained (in particular wrt extensions) without having to duplicate the
6416 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
6419 *) Enhance the general user interface with mechanisms for inner control
6420 and with possibilities to have yes/no kind of prompts.
6423 *) Change all calls to low level digest routines in the library and
6424 applications to use EVP. Add missing calls to HMAC_cleanup() and
6425 don't assume HMAC_CTX can be copied using memcpy().
6426 [Verdon Walker <VWalker@novell.com>, Steve Henson]
6428 *) Add the possibility to control engines through control names but with
6429 arbitrary arguments instead of just a string.
6430 Change the key loaders to take a UI_METHOD instead of a callback
6431 function pointer. NOTE: this breaks binary compatibility with earlier
6432 versions of OpenSSL [engine].
6433 Adapt the nCipher code for these new conditions and add a card insertion
6437 *) Enhance the general user interface with mechanisms to better support
6438 dialog box interfaces, application-defined prompts, the possibility
6439 to use defaults (for example default passwords from somewhere else)
6440 and interrupts/cancellations.
6443 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
6444 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
6447 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
6448 tidy up some unnecessarily weird code in 'sk_new()').
6449 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
6451 *) Change the key loading routines for ENGINEs to use the same kind
6452 callback (pem_password_cb) as all other routines that need this
6456 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
6457 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
6458 than this minimum value is recommended.
6461 *) New random seeder for OpenVMS, using the system process statistics
6462 that are easily reachable.
6465 *) Windows apparently can't transparently handle global
6466 variables defined in DLLs. Initialisations such as:
6468 const ASN1_ITEM *it = &ASN1_INTEGER_it;
6470 wont compile. This is used by the any applications that need to
6471 declare their own ASN1 modules. This was fixed by adding the option
6472 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
6473 needed for static libraries under Win32.
6476 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
6477 setting of purpose and trust fields. New X509_STORE trust and
6478 purpose functions and tidy up setting in other SSL functions.
6481 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
6482 structure. These are inherited by X509_STORE_CTX when it is
6483 initialised. This allows various defaults to be set in the
6484 X509_STORE structure (such as flags for CRL checking and custom
6485 purpose or trust settings) for functions which only use X509_STORE_CTX
6486 internally such as S/MIME.
6488 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
6489 trust settings if they are not set in X509_STORE. This allows X509_STORE
6490 purposes and trust (in S/MIME for example) to override any set by default.
6492 Add command line options for CRL checking to smime, s_client and s_server
6496 *) Initial CRL based revocation checking. If the CRL checking flag(s)
6497 are set then the CRL is looked up in the X509_STORE structure and
6498 its validity and signature checked, then if the certificate is found
6499 in the CRL the verify fails with a revoked error.
6501 Various new CRL related callbacks added to X509_STORE_CTX structure.
6503 Command line options added to 'verify' application to support this.
6505 This needs some additional work, such as being able to handle multiple
6506 CRLs with different times, extension based lookup (rather than just
6507 by subject name) and ultimately more complete V2 CRL extension
6511 *) Add a general user interface API (crypto/ui/). This is designed
6512 to replace things like des_read_password and friends (backward
6513 compatibility functions using this new API are provided).
6514 The purpose is to remove prompting functions from the DES code
6515 section as well as provide for prompting through dialog boxes in
6516 a window system and the like.
6519 *) Add "ex_data" support to ENGINE so implementations can add state at a
6520 per-structure level rather than having to store it globally.
6523 *) Make it possible for ENGINE structures to be copied when retrieved by
6524 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
6525 This causes the "original" ENGINE structure to act like a template,
6526 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
6527 operational state can be localised to each ENGINE structure, despite the
6528 fact they all share the same "methods". New ENGINE structures returned in
6529 this case have no functional references and the return value is the single
6530 structural reference. This matches the single structural reference returned
6531 by ENGINE_by_id() normally, when it is incremented on the pre-existing
6535 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
6536 needs to match any other type at all we need to manually clear the
6540 *) Changes to the "openssl engine" utility to include;
6541 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
6542 about an ENGINE's available control commands.
6543 - executing control commands from command line arguments using the
6544 '-pre' and '-post' switches. '-post' is only used if '-t' is
6545 specified and the ENGINE is successfully initialised. The syntax for
6546 the individual commands are colon-separated, for example;
6547 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
6550 *) New dynamic control command support for ENGINEs. ENGINEs can now
6551 declare their own commands (numbers), names (strings), descriptions,
6552 and input types for run-time discovery by calling applications. A
6553 subset of these commands are implicitly classed as "executable"
6554 depending on their input type, and only these can be invoked through
6555 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
6556 can be based on user input, config files, etc). The distinction is
6557 that "executable" commands cannot return anything other than a boolean
6558 result and can only support numeric or string input, whereas some
6559 discoverable commands may only be for direct use through
6560 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
6561 pointers, or other custom uses. The "executable" commands are to
6562 support parameterisations of ENGINE behaviour that can be
6563 unambiguously defined by ENGINEs and used consistently across any
6564 OpenSSL-based application. Commands have been added to all the
6565 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
6566 control over shared-library paths without source code alterations.
6569 *) Changed all ENGINE implementations to dynamically allocate their
6570 ENGINEs rather than declaring them statically. Apart from this being
6571 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
6572 this also allows the implementations to compile without using the
6573 internal engine_int.h header.
6576 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
6577 'const' value. Any code that should be able to modify a RAND_METHOD
6578 should already have non-const pointers to it (ie. they should only
6579 modify their own ones).
6582 *) Made a variety of little tweaks to the ENGINE code.
6583 - "atalla" and "ubsec" string definitions were moved from header files
6584 to C code. "nuron" string definitions were placed in variables
6585 rather than hard-coded - allowing parameterisation of these values
6586 later on via ctrl() commands.
6587 - Removed unused "#if 0"'d code.
6588 - Fixed engine list iteration code so it uses ENGINE_free() to release
6589 structural references.
6590 - Constified the RAND_METHOD element of ENGINE structures.
6591 - Constified various get/set functions as appropriate and added
6592 missing functions (including a catch-all ENGINE_cpy that duplicates
6593 all ENGINE values onto a new ENGINE except reference counts/state).
6594 - Removed NULL parameter checks in get/set functions. Setting a method
6595 or function to NULL is a way of cancelling out a previously set
6596 value. Passing a NULL ENGINE parameter is just plain stupid anyway
6597 and doesn't justify the extra error symbols and code.
6598 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
6599 flags from engine_int.h to engine.h.
6600 - Changed prototypes for ENGINE handler functions (init(), finish(),
6601 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
6604 *) Implement binary inversion algorithm for BN_mod_inverse in addition
6605 to the algorithm using long division. The binary algorithm can be
6606 used only if the modulus is odd. On 32-bit systems, it is faster
6607 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
6608 roughly 5-15% for 256-bit moduli), so we use it only for moduli
6609 up to 450 bits. In 64-bit environments, the binary algorithm
6610 appears to be advantageous for much longer moduli; here we use it
6611 for moduli up to 2048 bits.
6614 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
6615 could not support the combine flag in choice fields.
6618 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
6619 extensions from a certificate request to the certificate.
6622 *) Allow multiple 'certopt' and 'nameopt' options to be separated
6623 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
6624 file: this allows the display of the certificate about to be
6625 signed to be customised, to allow certain fields to be included
6626 or excluded and extension details. The old system didn't display
6627 multicharacter strings properly, omitted fields not in the policy
6628 and couldn't display additional details such as extensions.
6631 *) Function EC_POINTs_mul for multiple scalar multiplication
6632 of an arbitrary number of elliptic curve points
6633 \sum scalars[i]*points[i],
6634 optionally including the generator defined for the EC_GROUP:
6635 scalar*generator + \sum scalars[i]*points[i].
6637 EC_POINT_mul is a simple wrapper function for the typical case
6638 that the point list has just one item (besides the optional
6642 *) First EC_METHODs for curves over GF(p):
6644 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
6645 operations and provides various method functions that can also
6646 operate with faster implementations of modular arithmetic.
6648 EC_GFp_mont_method() reuses most functions that are part of
6649 EC_GFp_simple_method, but uses Montgomery arithmetic.
6651 [Bodo Moeller; point addition and point doubling
6652 implementation directly derived from source code provided by
6653 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
6655 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
6656 crypto/ec/ec_lib.c):
6658 Curves are EC_GROUP objects (with an optional group generator)
6659 based on EC_METHODs that are built into the library.
6661 Points are EC_POINT objects based on EC_GROUP objects.
6663 Most of the framework would be able to handle curves over arbitrary
6664 finite fields, but as there are no obvious types for fields other
6665 than GF(p), some functions are limited to that for now.
6668 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
6669 that the file contains a complete HTTP response.
6672 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
6673 change the def and num file printf format specifier from "%-40sXXX"
6674 to "%-39s XXX". The latter will always guarantee a space after the
6675 field while the former will cause them to run together if the field
6676 is 40 of more characters long.
6679 *) Constify the cipher and digest 'method' functions and structures
6680 and modify related functions to take constant EVP_MD and EVP_CIPHER
6684 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
6685 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
6688 *) Modify EVP_Digest*() routines so they now return values. Although the
6689 internal software routines can never fail additional hardware versions
6693 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
6695 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
6696 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
6699 ERR_R_NESTED_ASN1_ERROR
6701 ERR_R_MISSING_ASN1_EOS
6702 were 4 .. 9, conflicting with
6703 ERR_LIB_RSA (= ERR_R_RSA_LIB)
6705 ERR_LIB_PEM (= ERR_R_PEM_LIB).
6706 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
6708 Add new error code 'ERR_R_INTERNAL_ERROR'.
6711 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
6715 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
6716 sets the subject name for a new request or supersedes the
6717 subject name in a given request. Formats that can be parsed are
6718 'CN=Some Name, OU=myOU, C=IT'
6720 'CN=Some Name/OU=myOU/C=IT'.
6722 Add options '-batch' and '-verbose' to 'openssl req'.
6723 [Massimiliano Pala <madwolf@hackmasters.net>]
6725 *) Introduce the possibility to access global variables through
6726 functions on platform were that's the best way to handle exporting
6727 global variables in shared libraries. To enable this functionality,
6728 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
6729 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
6730 is normally done by Configure or something similar).
6732 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
6733 in the source file (foo.c) like this:
6735 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
6736 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
6738 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
6739 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
6741 OPENSSL_DECLARE_GLOBAL(int,foo);
6742 #define foo OPENSSL_GLOBAL_REF(foo)
6743 OPENSSL_DECLARE_GLOBAL(double,bar);
6744 #define bar OPENSSL_GLOBAL_REF(bar)
6746 The #defines are very important, and therefore so is including the
6747 header file everywhere where the defined globals are used.
6749 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
6750 of ASN.1 items, but that structure is a bit different.
6752 The largest change is in util/mkdef.pl which has been enhanced with
6753 better and easier to understand logic to choose which symbols should
6754 go into the Windows .def files as well as a number of fixes and code
6755 cleanup (among others, algorithm keywords are now sorted
6756 lexicographically to avoid constant rewrites).
6759 *) In BN_div() keep a copy of the sign of 'num' before writing the
6760 result to 'rm' because if rm==num the value will be overwritten
6761 and produce the wrong result if 'num' is negative: this caused
6762 problems with BN_mod() and BN_nnmod().
6765 *) Function OCSP_request_verify(). This checks the signature on an
6766 OCSP request and verifies the signer certificate. The signer
6767 certificate is just checked for a generic purpose and OCSP request
6771 *) Add OCSP_check_validity() function to check the validity of OCSP
6772 responses. OCSP responses are prepared in real time and may only
6773 be a few seconds old. Simply checking that the current time lies
6774 between thisUpdate and nextUpdate max reject otherwise valid responses
6775 caused by either OCSP responder or client clock inaccuracy. Instead
6776 we allow thisUpdate and nextUpdate to fall within a certain period of
6777 the current time. The age of the response can also optionally be
6778 checked. Two new options -validity_period and -status_age added to
6782 *) If signature or public key algorithm is unrecognized print out its
6783 OID rather that just UNKNOWN.
6786 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
6787 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
6788 ID to be generated from the issuer certificate alone which can then be
6789 passed to OCSP_id_issuer_cmp().
6792 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
6793 ASN1 modules to export functions returning ASN1_ITEM pointers
6794 instead of the ASN1_ITEM structures themselves. This adds several
6795 new macros which allow the underlying ASN1 function/structure to
6796 be accessed transparently. As a result code should not use ASN1_ITEM
6797 references directly (such as &X509_it) but instead use the relevant
6798 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
6799 use of the new ASN1 code on platforms where exporting structures
6800 is problematical (for example in shared libraries) but exporting
6801 functions returning pointers to structures is not.
6804 *) Add support for overriding the generation of SSL/TLS session IDs.
6805 These callbacks can be registered either in an SSL_CTX or per SSL.
6806 The purpose of this is to allow applications to control, if they wish,
6807 the arbitrary values chosen for use as session IDs, particularly as it
6808 can be useful for session caching in multiple-server environments. A
6809 command-line switch for testing this (and any client code that wishes
6810 to use such a feature) has been added to "s_server".
6811 [Geoff Thorpe, Lutz Jaenicke]
6813 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
6814 of the form '#if defined(...) || defined(...) || ...' and
6815 '#if !defined(...) && !defined(...) && ...'. This also avoids
6816 the growing number of special cases it was previously handling.
6819 *) Make all configuration macros available for application by making
6820 sure they are available in opensslconf.h, by giving them names starting
6821 with "OPENSSL_" to avoid conflicts with other packages and by making
6822 sure e_os2.h will cover all platform-specific cases together with
6824 Additionally, it is now possible to define configuration/platform-
6825 specific names (called "system identities"). In the C code, these
6826 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
6827 macro with the name beginning with "OPENSSL_SYS_", which is determined
6828 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
6832 *) New option -set_serial to 'req' and 'x509' this allows the serial
6833 number to use to be specified on the command line. Previously self
6834 signed certificates were hard coded with serial number 0 and the
6835 CA options of 'x509' had to use a serial number in a file which was
6839 *) New options to 'ca' utility to support V2 CRL entry extensions.
6840 Currently CRL reason, invalidity date and hold instruction are
6841 supported. Add new CRL extensions to V3 code and some new objects.
6844 *) New function EVP_CIPHER_CTX_set_padding() this is used to
6845 disable standard block padding (aka PKCS#5 padding) in the EVP
6846 API, which was previously mandatory. This means that the data is
6847 not padded in any way and so the total length much be a multiple
6848 of the block size, otherwise an error occurs.
6851 *) Initial (incomplete) OCSP SSL support.
6854 *) New function OCSP_parse_url(). This splits up a URL into its host,
6855 port and path components: primarily to parse OCSP URLs. New -url
6856 option to ocsp utility.
6859 *) New nonce behavior. The return value of OCSP_check_nonce() now
6860 reflects the various checks performed. Applications can decide
6861 whether to tolerate certain situations such as an absent nonce
6862 in a response when one was present in a request: the ocsp application
6863 just prints out a warning. New function OCSP_add1_basic_nonce()
6864 this is to allow responders to include a nonce in a response even if
6865 the request is nonce-less.
6868 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
6869 skipped when using openssl x509 multiple times on a single input file,
6870 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
6873 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
6874 set string type: to handle setting ASN1_TIME structures. Fix ca
6875 utility to correctly initialize revocation date of CRLs.
6878 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
6879 the clients preferred ciphersuites and rather use its own preferences.
6880 Should help to work around M$ SGC (Server Gated Cryptography) bug in
6881 Internet Explorer by ensuring unchanged hash method during stepup.
6882 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
6885 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
6886 to aes and add a new 'exist' option to print out symbols that don't
6890 *) Additional options to ocsp utility to allow flags to be set and
6891 additional certificates supplied.
6894 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
6895 OCSP client a number of certificate to only verify the response
6899 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
6900 handle the new API. Currently only ECB, CBC modes supported. Add new
6903 Add TLS AES ciphersuites as described in RFC3268, "Advanced
6904 Encryption Standard (AES) Ciphersuites for Transport Layer
6905 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
6906 not enabled by default and were not part of the "ALL" ciphersuite
6907 alias because they were not yet official; they could be
6908 explicitly requested by specifying the "AESdraft" ciphersuite
6909 group alias. In the final release of OpenSSL 0.9.7, the group
6910 alias is called "AES" and is part of "ALL".)
6911 [Ben Laurie, Steve Henson, Bodo Moeller]
6913 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
6914 request to response.
6917 *) Functions for OCSP responders. OCSP_request_onereq_count(),
6918 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
6919 extract information from a certificate request. OCSP_response_create()
6920 creates a response and optionally adds a basic response structure.
6921 OCSP_basic_add1_status() adds a complete single response to a basic
6922 response and returns the OCSP_SINGLERESP structure just added (to allow
6923 extensions to be included for example). OCSP_basic_add1_cert() adds a
6924 certificate to a basic response and OCSP_basic_sign() signs a basic
6925 response with various flags. New helper functions ASN1_TIME_check()
6926 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
6927 (converts ASN1_TIME to GeneralizedTime).
6930 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
6931 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
6932 structure from a certificate. X509_pubkey_digest() digests the public_key
6933 contents: this is used in various key identifiers.
6936 *) Make sk_sort() tolerate a NULL argument.
6937 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
6939 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
6940 passed by the function are trusted implicitly. If any of them signed the
6941 response then it is assumed to be valid and is not verified.
6944 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
6945 to data. This was previously part of the PKCS7 ASN1 code. This
6946 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
6947 [Steve Henson, reported by Kenneth R. Robinette
6948 <support@securenetterm.com>]
6950 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
6951 routines: without these tracing memory leaks is very painful.
6952 Fix leaks in PKCS12 and PKCS7 routines.
6955 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
6956 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
6957 effectively meant GeneralizedTime would never be used. Now it
6958 is initialised to -1 but X509_time_adj() now has to check the value
6959 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
6960 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
6961 [Steve Henson, reported by Kenneth R. Robinette
6962 <support@securenetterm.com>]
6964 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
6965 result in a zero length in the ASN1_INTEGER structure which was
6966 not consistent with the structure when d2i_ASN1_INTEGER() was used
6967 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
6968 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
6969 where it did not print out a minus for negative ASN1_INTEGER.
6972 *) Add summary printout to ocsp utility. The various functions which
6973 convert status values to strings have been renamed to:
6974 OCSP_response_status_str(), OCSP_cert_status_str() and
6975 OCSP_crl_reason_str() and are no longer static. New options
6976 to verify nonce values and to disable verification. OCSP response
6977 printout format cleaned up.
6980 *) Add additional OCSP certificate checks. These are those specified
6981 in RFC2560. This consists of two separate checks: the CA of the
6982 certificate being checked must either be the OCSP signer certificate
6983 or the issuer of the OCSP signer certificate. In the latter case the
6984 OCSP signer certificate must contain the OCSP signing extended key
6985 usage. This check is performed by attempting to match the OCSP
6986 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
6987 in the OCSP_CERTID structures of the response.
6990 *) Initial OCSP certificate verification added to OCSP_basic_verify()
6991 and related routines. This uses the standard OpenSSL certificate
6992 verify routines to perform initial checks (just CA validity) and
6993 to obtain the certificate chain. Then additional checks will be
6994 performed on the chain. Currently the root CA is checked to see
6995 if it is explicitly trusted for OCSP signing. This is used to set
6996 a root CA as a global signing root: that is any certificate that
6997 chains to that CA is an acceptable OCSP signing certificate.
7000 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
7001 extensions from a separate configuration file.
7002 As when reading extensions from the main configuration file,
7003 the '-extensions ...' option may be used for specifying the
7005 [Massimiliano Pala <madwolf@comune.modena.it>]
7007 *) New OCSP utility. Allows OCSP requests to be generated or
7008 read. The request can be sent to a responder and the output
7009 parsed, outputed or printed in text form. Not complete yet:
7010 still needs to check the OCSP response validity.
7013 *) New subcommands for 'openssl ca':
7014 'openssl ca -status <serial>' prints the status of the cert with
7015 the given serial number (according to the index file).
7016 'openssl ca -updatedb' updates the expiry status of certificates
7018 [Massimiliano Pala <madwolf@comune.modena.it>]
7020 *) New '-newreq-nodes' command option to CA.pl. This is like
7021 '-newreq', but calls 'openssl req' with the '-nodes' option
7022 so that the resulting key is not encrypted.
7023 [Damien Miller <djm@mindrot.org>]
7025 *) New configuration for the GNU Hurd.
7026 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
7028 *) Initial code to implement OCSP basic response verify. This
7029 is currently incomplete. Currently just finds the signer's
7030 certificate and verifies the signature on the response.
7033 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
7034 value of OPENSSLDIR. This is available via the new '-d' option
7035 to 'openssl version', and is also included in 'openssl version -a'.
7038 *) Allowing defining memory allocation callbacks that will be given
7039 file name and line number information in additional arguments
7040 (a const char* and an int). The basic functionality remains, as
7041 well as the original possibility to just replace malloc(),
7042 realloc() and free() by functions that do not know about these
7043 additional arguments. To register and find out the current
7044 settings for extended allocation functions, the following
7045 functions are provided:
7047 CRYPTO_set_mem_ex_functions
7048 CRYPTO_set_locked_mem_ex_functions
7049 CRYPTO_get_mem_ex_functions
7050 CRYPTO_get_locked_mem_ex_functions
7052 These work the same way as CRYPTO_set_mem_functions and friends.
7053 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
7054 extended allocation function is enabled.
7055 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
7056 a conventional allocation function is enabled.
7057 [Richard Levitte, Bodo Moeller]
7059 *) Finish off removing the remaining LHASH function pointer casts.
7060 There should no longer be any prototype-casting required when using
7061 the LHASH abstraction, and any casts that remain are "bugs". See
7062 the callback types and macros at the head of lhash.h for details
7063 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
7066 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
7067 If /dev/[u]random devices are not available or do not return enough
7068 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
7070 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
7071 /etc/entropy will be queried once each in this sequence, quering stops
7072 when enough entropy was collected without querying more sockets.
7075 *) Change the Unix RAND_poll() variant to be able to poll several
7076 random devices, as specified by DEVRANDOM, until a sufficient amount
7077 of data has been collected. We spend at most 10 ms on each file
7078 (select timeout) and read in non-blocking mode. DEVRANDOM now
7079 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
7080 (previously it was just the string "/dev/urandom"), so on typical
7081 platforms the 10 ms delay will never occur.
7082 Also separate out the Unix variant to its own file, rand_unix.c.
7083 For VMS, there's a currently-empty rand_vms.c.
7086 *) Move OCSP client related routines to ocsp_cl.c. These
7087 provide utility functions which an application needing
7088 to issue a request to an OCSP responder and analyse the
7089 response will typically need: as opposed to those which an
7090 OCSP responder itself would need which will be added later.
7092 OCSP_request_sign() signs an OCSP request with an API similar
7093 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
7094 response. OCSP_response_get1_basic() extracts basic response
7095 from response. OCSP_resp_find_status(): finds and extracts status
7096 information from an OCSP_CERTID structure (which will be created
7097 when the request structure is built). These are built from lower
7098 level functions which work on OCSP_SINGLERESP structures but
7099 wont normally be used unless the application wishes to examine
7100 extensions in the OCSP response for example.
7102 Replace nonce routines with a pair of functions.
7103 OCSP_request_add1_nonce() adds a nonce value and optionally
7104 generates a random value. OCSP_check_nonce() checks the
7105 validity of the nonce in an OCSP response.
7108 *) Change function OCSP_request_add() to OCSP_request_add0_id().
7109 This doesn't copy the supplied OCSP_CERTID and avoids the
7110 need to free up the newly created id. Change return type
7111 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
7112 This can then be used to add extensions to the request.
7113 Deleted OCSP_request_new(), since most of its functionality
7114 is now in OCSP_REQUEST_new() (and the case insensitive name
7115 clash) apart from the ability to set the request name which
7116 will be added elsewhere.
7119 *) Update OCSP API. Remove obsolete extensions argument from
7120 various functions. Extensions are now handled using the new
7121 OCSP extension code. New simple OCSP HTTP function which
7122 can be used to send requests and parse the response.
7125 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
7126 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
7127 uses the special reorder version of SET OF to sort the attributes
7128 and reorder them to match the encoded order. This resolves a long
7129 standing problem: a verify on a PKCS7 structure just after signing
7130 it used to fail because the attribute order did not match the
7131 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
7132 it uses the received order. This is necessary to tolerate some broken
7133 software that does not order SET OF. This is handled by encoding
7134 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
7135 to produce the required SET OF.
7138 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
7139 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
7140 files to get correct declarations of the ASN.1 item variables.
7143 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
7144 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
7145 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
7146 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
7147 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
7148 ASN1_ITEM and no wrapper functions.
7151 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
7152 replace the old function pointer based I/O routines. Change most of
7153 the *_d2i_bio() and *_d2i_fp() functions to use these.
7156 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
7157 lines, recognice more "algorithms" that can be deselected, and make
7158 it complain about algorithm deselection that isn't recognised.
7161 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
7162 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
7163 to use new functions. Add NO_ASN1_OLD which can be set to remove
7164 some old style ASN1 functions: this can be used to determine if old
7165 code will still work when these eventually go away.
7168 *) New extension functions for OCSP structures, these follow the
7169 same conventions as certificates and CRLs.
7172 *) New function X509V3_add1_i2d(). This automatically encodes and
7173 adds an extension. Its behaviour can be customised with various
7174 flags to append, replace or delete. Various wrappers added for
7175 certifcates and CRLs.
7178 *) Fix to avoid calling the underlying ASN1 print routine when
7179 an extension cannot be parsed. Correct a typo in the
7180 OCSP_SERVICELOC extension. Tidy up print OCSP format.
7183 *) Make mkdef.pl parse some of the ASN1 macros and add appropriate
7184 entries for variables.
7187 *) Add functionality to apps/openssl.c for detecting locking
7188 problems: As the program is single-threaded, all we have
7189 to do is register a locking callback using an array for
7190 storing which locks are currently held by the program.
7193 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
7194 SSL_get_ex_data_X509_STORE_idx(), which is used in
7195 ssl_verify_cert_chain() and thus can be called at any time
7196 during TLS/SSL handshakes so that thread-safety is essential.
7197 Unfortunately, the ex_data design is not at all suited
7198 for multi-threaded use, so it probably should be abolished.
7201 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
7202 [Broadcom, tweaked and integrated by Geoff Thorpe]
7204 *) Move common extension printing code to new function
7205 X509V3_print_extensions(). Reorganise OCSP print routines and
7206 implement some needed OCSP ASN1 functions. Add OCSP extensions.
7209 *) New function X509_signature_print() to remove duplication in some
7213 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
7214 set (this was treated exactly the same as SET OF previously). This
7215 is used to reorder the STACK representing the structure to match the
7216 encoding. This will be used to get round a problem where a PKCS7
7217 structure which was signed could not be verified because the STACK
7218 order did not reflect the encoded order.
7221 *) Reimplement the OCSP ASN1 module using the new code.
7224 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
7225 for its ASN1 operations. The old style function pointers still exist
7226 for now but they will eventually go away.
7229 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
7230 completely replaces the old ASN1 functionality with a table driven
7231 encoder and decoder which interprets an ASN1_ITEM structure describing
7232 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
7233 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
7234 has also been converted to the new form.
7237 *) Change BN_mod_exp_recp so that negative moduli are tolerated
7238 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
7239 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
7240 for negative moduli.
7243 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
7244 of not touching the result's sign bit.
7247 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
7251 *) Changed the LHASH code to use prototypes for callbacks, and created
7252 macros to declare and implement thin (optionally static) functions
7253 that provide type-safety and avoid function pointer casting for the
7254 type-specific callbacks.
7257 *) Added Kerberos Cipher Suites to be used with TLS, as written in
7259 [Veers Staats <staatsvr@asc.hpc.mil>,
7260 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
7262 *) Reformat the FAQ so the different questions and answers can be divided
7263 in sections depending on the subject.
7266 *) Have the zlib compression code load ZLIB.DLL dynamically under
7270 *) New function BN_mod_sqrt for computing square roots modulo a prime
7271 (using the probabilistic Tonelli-Shanks algorithm unless
7272 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
7273 be handled deterministically).
7274 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
7276 *) Make BN_mod_inverse faster by explicitly handling small quotients
7277 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
7278 512 bits], about 30% for larger ones [1024 or 2048 bits].)
7281 *) New function BN_kronecker.
7284 *) Fix BN_gcd so that it works on negative inputs; the result is
7285 positive unless both parameters are zero.
7286 Previously something reasonably close to an infinite loop was
7287 possible because numbers could be growing instead of shrinking
7288 in the implementation of Euclid's algorithm.
7291 *) Fix BN_is_word() and BN_is_one() macros to take into account the
7292 sign of the number in question.
7294 Fix BN_is_word(a,w) to work correctly for w == 0.
7296 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
7297 because its test if the absolute value of 'a' equals 'w'.
7298 Note that BN_abs_is_word does *not* handle w == 0 reliably;
7299 it exists mostly for use in the implementations of BN_is_zero(),
7300 BN_is_one(), and BN_is_word().
7303 *) New function BN_swap.
7306 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
7307 the exponentiation functions are more likely to produce reasonable
7308 results on negative inputs.
7311 *) Change BN_mod_mul so that the result is always non-negative.
7312 Previously, it could be negative if one of the factors was negative;
7313 I don't think anyone really wanted that behaviour.
7316 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
7317 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
7318 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
7319 and add new functions:
7328 BN_mod_lshift1_quick
7332 These functions always generate non-negative results.
7334 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
7335 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
7337 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
7338 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
7339 be reduced modulo m.
7340 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
7343 The following entry accidentally appeared in the CHANGES file
7344 distributed with OpenSSL 0.9.7. The modifications described in
7345 it do *not* apply to OpenSSL 0.9.7.
7347 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
7348 was actually never needed) and in BN_mul(). The removal in BN_mul()
7349 required a small change in bn_mul_part_recursive() and the addition
7350 of the functions bn_cmp_part_words(), bn_sub_part_words() and
7351 bn_add_part_words(), which do the same thing as bn_cmp_words(),
7352 bn_sub_words() and bn_add_words() except they take arrays with
7357 *) In 'openssl passwd', verify passwords read from the terminal
7358 unless the '-salt' option is used (which usually means that
7359 verification would just waste user's time since the resulting
7360 hash is going to be compared with some given password hash)
7361 or the new '-noverify' option is used.
7363 This is an incompatible change, but it does not affect
7364 non-interactive use of 'openssl passwd' (passwords on the command
7365 line, '-stdin' option, '-in ...' option) and thus should not
7369 *) Remove all references to RSAref, since there's no more need for it.
7372 *) Make DSO load along a path given through an environment variable
7373 (SHLIB_PATH) with shl_load().
7376 *) Constify the ENGINE code as a result of BIGNUM constification.
7377 Also constify the RSA code and most things related to it. In a
7378 few places, most notable in the depth of the ASN.1 code, ugly
7379 casts back to non-const were required (to be solved at a later
7383 *) Make it so the openssl application has all engines loaded by default.
7386 *) Constify the BIGNUM routines a little more.
7389 *) Add the following functions:
7391 ENGINE_load_cswift()
7393 ENGINE_load_atalla()
7395 ENGINE_load_builtin_engines()
7397 That way, an application can itself choose if external engines that
7398 are built-in in OpenSSL shall ever be used or not. The benefit is
7399 that applications won't have to be linked with libdl or other dso
7400 libraries unless it's really needed.
7402 Changed 'openssl engine' to load all engines on demand.
7403 Changed the engine header files to avoid the duplication of some
7404 declarations (they differed!).
7407 *) 'openssl engine' can now list capabilities.
7410 *) Better error reporting in 'openssl engine'.
7413 *) Never call load_dh_param(NULL) in s_server.
7416 *) Add engine application. It can currently list engines by name and
7417 identity, and test if they are actually available.
7420 *) Improve RPM specification file by forcing symbolic linking and making
7421 sure the installed documentation is also owned by root.root.
7422 [Damien Miller <djm@mindrot.org>]
7424 *) Give the OpenSSL applications more possibilities to make use of
7425 keys (public as well as private) handled by engines.
7428 *) Add OCSP code that comes from CertCo.
7431 *) Add VMS support for the Rijndael code.
7434 *) Added untested support for Nuron crypto accelerator.
7437 *) Add support for external cryptographic devices. This code was
7438 previously distributed separately as the "engine" branch.
7439 [Geoff Thorpe, Richard Levitte]
7441 *) Rework the filename-translation in the DSO code. It is now possible to
7442 have far greater control over how a "name" is turned into a filename
7443 depending on the operating environment and any oddities about the
7444 different shared library filenames on each system.
7447 *) Support threads on FreeBSD-elf in Configure.
7450 *) Fix for SHA1 assembly problem with MASM: it produces
7451 warnings about corrupt line number information when assembling
7452 with debugging information. This is caused by the overlapping
7454 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
7457 NCONF_get_number() has no error checking at all. As a replacement,
7458 NCONF_get_number_e() is defined (_e for "error checking") and is
7459 promoted strongly. The old NCONF_get_number is kept around for
7460 binary backward compatibility.
7461 Make it possible for methods to load from something other than a BIO,
7462 by providing a function pointer that is given a name instead of a BIO.
7463 For example, this could be used to load configuration data from an
7467 *) Fix for non blocking accept BIOs. Added new I/O special reason
7468 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
7469 with non blocking I/O was not possible because no retry code was
7470 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
7474 *) Added the beginnings of Rijndael support.
7477 *) Fix for bug in DirectoryString mask setting. Add support for
7478 X509_NAME_print_ex() in 'req' and X509_print_ex() function
7479 to allow certificate printing to more controllable, additional
7480 'certopt' option to 'x509' to allow new printing options to be
7484 *) Clean old EAY MD5 hack from e_os.h.
7487 Changes between 0.9.6l and 0.9.6m [17 Mar 2004]
7489 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
7490 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
7491 [Joe Orton, Steve Henson]
7493 Changes between 0.9.6k and 0.9.6l [04 Nov 2003]
7495 *) Fix additional bug revealed by the NISCC test suite:
7497 Stop bug triggering large recursion when presented with
7498 certain ASN.1 tags (CVE-2003-0851)
7501 Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
7503 *) Fix various bugs revealed by running the NISCC test suite:
7505 Stop out of bounds reads in the ASN1 code when presented with
7506 invalid tags (CVE-2003-0543 and CVE-2003-0544).
7508 If verify callback ignores invalid public key errors don't try to check
7509 certificate signature with the NULL public key.
7513 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
7514 if the server requested one: as stated in TLS 1.0 and SSL 3.0
7518 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
7519 extra data after the compression methods not only for TLS 1.0
7520 but also for SSL 3.0 (as required by the specification).
7521 [Bodo Moeller; problem pointed out by Matthias Loepfe]
7523 *) Change X509_certificate_type() to mark the key as exported/exportable
7524 when it's 512 *bits* long, not 512 bytes.
7527 Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
7529 *) Countermeasure against the Klima-Pokorny-Rosa extension of
7530 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
7531 a protocol version number mismatch like a decryption error
7532 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
7535 *) Turn on RSA blinding by default in the default implementation
7536 to avoid a timing attack. Applications that don't want it can call
7537 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
7538 They would be ill-advised to do so in most cases.
7539 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
7541 *) Change RSA blinding code so that it works when the PRNG is not
7542 seeded (in this case, the secret RSA exponent is abused as
7543 an unpredictable seed -- if it is not unpredictable, there
7544 is no point in blinding anyway). Make RSA blinding thread-safe
7545 by remembering the creator's thread ID in rsa->blinding and
7546 having all other threads use local one-time blinding factors
7547 (this requires more computation than sharing rsa->blinding, but
7548 avoids excessive locking; and if an RSA object is not shared
7549 between threads, blinding will still be very fast).
7552 Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
7554 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
7555 via timing by performing a MAC computation even if incorrrect
7556 block cipher padding has been found. This is a countermeasure
7557 against active attacks where the attacker has to distinguish
7558 between bad padding and a MAC verification error. (CVE-2003-0078)
7560 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
7561 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
7562 Martin Vuagnoux (EPFL, Ilion)]
7564 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
7566 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
7567 memory from it's contents. This is done with a counter that will
7568 place alternating values in each byte. This can be used to solve
7569 two issues: 1) the removal of calls to memset() by highly optimizing
7570 compilers, and 2) cleansing with other values than 0, since those can
7571 be read through on certain media, for example a swap space on disk.
7574 *) Bugfix: client side session caching did not work with external caching,
7575 because the session->cipher setting was not restored when reloading
7576 from the external cache. This problem was masked, when
7577 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
7578 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
7581 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
7582 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
7583 [Zeev Lieber <zeev-l@yahoo.com>]
7585 *) Undo an undocumented change introduced in 0.9.6e which caused
7586 repeated calls to OpenSSL_add_all_ciphers() and
7587 OpenSSL_add_all_digests() to be ignored, even after calling
7591 *) Change the default configuration reader to deal with last line not
7592 being properly terminated.
7595 *) Change X509_NAME_cmp() so it applies the special rules on handling
7596 DN values that are of type PrintableString, as well as RDNs of type
7597 emailAddress where the value has the type ia5String.
7598 [stefank@valicert.com via Richard Levitte]
7600 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
7601 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
7602 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
7603 the bitwise-OR of the two for use by the majority of applications
7604 wanting this behaviour, and update the docs. The documented
7605 behaviour and actual behaviour were inconsistent and had been
7606 changing anyway, so this is more a bug-fix than a behavioural
7608 [Geoff Thorpe, diagnosed by Nadav Har'El]
7610 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
7611 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
7614 *) Fix initialization code race conditions in
7615 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
7616 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
7617 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
7618 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
7619 ssl2_get_cipher_by_char(),
7620 ssl3_get_cipher_by_char().
7621 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
7623 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
7624 the cached sessions are flushed, as the remove_cb() might use ex_data
7625 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
7626 (see [openssl.org #212]).
7627 [Geoff Thorpe, Lutz Jaenicke]
7629 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
7630 length, instead of the encoding length to d2i_ASN1_OBJECT.
7633 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
7635 *) [In 0.9.6g-engine release:]
7636 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
7637 [Lynn Gazis <lgazis@rainbow.com>]
7639 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
7641 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
7642 and get fix the header length calculation.
7643 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
7644 Alon Kantor <alonk@checkpoint.com> (and others),
7647 *) Use proper error handling instead of 'assertions' in buffer
7648 overflow checks added in 0.9.6e. This prevents DoS (the
7649 assertions could call abort()).
7650 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
7652 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
7654 *) Add various sanity checks to asn1_get_length() to reject
7655 the ASN1 length bytes if they exceed sizeof(long), will appear
7656 negative or the content length exceeds the length of the
7658 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
7660 *) Fix cipher selection routines: ciphers without encryption had no flags
7661 for the cipher strength set and where therefore not handled correctly
7662 by the selection routines (PR #130).
7665 *) Fix EVP_dsa_sha macro.
7669 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
7670 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
7671 that was added in OpenSSL 0.9.6d.
7673 As the countermeasure turned out to be incompatible with some
7674 broken SSL implementations, the new option is part of SSL_OP_ALL.
7675 SSL_OP_ALL is usually employed when compatibility with weird SSL
7676 implementations is desired (e.g. '-bugs' option to 's_client' and
7677 's_server'), so the new option is automatically set in many
7681 *) Changes in security patch:
7683 Changes marked "(CHATS)" were sponsored by the Defense Advanced
7684 Research Projects Agency (DARPA) and Air Force Research Laboratory,
7685 Air Force Materiel Command, USAF, under agreement number
7688 *) Add various sanity checks to asn1_get_length() to reject
7689 the ASN1 length bytes if they exceed sizeof(long), will appear
7690 negative or the content length exceeds the length of the
7691 supplied buffer. (CVE-2002-0659)
7692 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
7694 *) Assertions for various potential buffer overflows, not known to
7696 [Ben Laurie (CHATS)]
7698 *) Various temporary buffers to hold ASCII versions of integers were
7699 too small for 64 bit platforms. (CVE-2002-0655)
7700 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
7702 *) Remote buffer overflow in SSL3 protocol - an attacker could
7703 supply an oversized session ID to a client. (CVE-2002-0656)
7704 [Ben Laurie (CHATS)]
7706 *) Remote buffer overflow in SSL2 protocol - an attacker could
7707 supply an oversized client master key. (CVE-2002-0656)
7708 [Ben Laurie (CHATS)]
7710 Changes between 0.9.6c and 0.9.6d [9 May 2002]
7712 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
7713 encoded as NULL) with id-dsa-with-sha1.
7714 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
7716 *) Check various X509_...() return values in apps/req.c.
7717 [Nils Larsch <nla@trustcenter.de>]
7719 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
7720 an end-of-file condition would erronously be flagged, when the CRLF
7721 was just at the end of a processed block. The bug was discovered when
7722 processing data through a buffering memory BIO handing the data to a
7723 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
7724 <ptsekov@syntrex.com> and Nedelcho Stanev.
7727 *) Implement a countermeasure against a vulnerability recently found
7728 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
7729 before application data chunks to avoid the use of known IVs
7730 with data potentially chosen by the attacker.
7733 *) Fix length checks in ssl3_get_client_hello().
7736 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
7737 to prevent ssl3_read_internal() from incorrectly assuming that
7738 ssl3_read_bytes() found application data while handshake
7739 processing was enabled when in fact s->s3->in_read_app_data was
7740 merely automatically cleared during the initial handshake.
7741 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
7743 *) Fix object definitions for Private and Enterprise: they were not
7744 recognized in their shortname (=lowercase) representation. Extend
7745 obj_dat.pl to issue an error when using undefined keywords instead
7746 of silently ignoring the problem (Svenning Sorensen
7747 <sss@sss.dnsalias.net>).
7750 *) Fix DH_generate_parameters() so that it works for 'non-standard'
7751 generators, i.e. generators other than 2 and 5. (Previously, the
7752 code did not properly initialise the 'add' and 'rem' values to
7753 BN_generate_prime().)
7755 In the new general case, we do not insist that 'generator' is
7756 actually a primitive root: This requirement is rather pointless;
7757 a generator of the order-q subgroup is just as good, if not
7761 *) Map new X509 verification errors to alerts. Discovered and submitted by
7762 Tom Wu <tom@arcot.com>.
7765 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
7766 returning non-zero before the data has been completely received
7767 when using non-blocking I/O.
7768 [Bodo Moeller; problem pointed out by John Hughes]
7770 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
7771 [Ben Laurie, Lutz Jaenicke]
7773 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
7774 Yoram Zahavi <YoramZ@gilian.com>).
7777 *) Add information about CygWin 1.3 and on, and preserve proper
7778 configuration for the versions before that.
7779 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
7781 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
7782 check whether we deal with a copy of a session and do not delete from
7783 the cache in this case. Problem reported by "Izhar Shoshani Levi"
7784 <izhar@checkpoint.com>.
7787 *) Do not store session data into the internal session cache, if it
7788 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
7789 flag is set). Proposed by Aslam <aslam@funk.com>.
7792 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
7796 *) [In 0.9.6d-engine release:]
7797 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
7798 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
7800 *) Add the configuration target linux-s390x.
7801 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
7803 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
7804 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
7805 variable as an indication that a ClientHello message has been
7806 received. As the flag value will be lost between multiple
7807 invocations of ssl3_accept when using non-blocking I/O, the
7808 function may not be aware that a handshake has actually taken
7809 place, thus preventing a new session from being added to the
7812 To avoid this problem, we now set s->new_session to 2 instead of
7813 using a local variable.
7814 [Lutz Jaenicke, Bodo Moeller]
7816 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
7817 if the SSL_R_LENGTH_MISMATCH error is detected.
7818 [Geoff Thorpe, Bodo Moeller]
7820 *) New 'shared_ldflag' column in Configure platform table.
7823 *) Fix EVP_CIPHER_mode macro.
7824 ["Dan S. Camper" <dan@bti.net>]
7826 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
7827 type, we must throw them away by setting rr->length to 0.
7828 [D P Chang <dpc@qualys.com>]
7830 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
7832 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
7833 <Dominikus.Scherkl@biodata.com>. (The previous implementation
7834 worked incorrectly for those cases where range = 10..._2 and
7835 3*range is two bits longer than range.)
7838 *) Only add signing time to PKCS7 structures if it is not already
7842 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
7843 OBJ_ld_ce should be OBJ_id_ce.
7844 Also some ip-pda OIDs in crypto/objects/objects.txt were
7845 incorrect (cf. RFC 3039).
7846 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
7848 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
7849 returns early because it has nothing to do.
7850 [Andy Schneider <andy.schneider@bjss.co.uk>]
7852 *) [In 0.9.6c-engine release:]
7853 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
7854 [Andy Schneider <andy.schneider@bjss.co.uk>]
7856 *) [In 0.9.6c-engine release:]
7857 Add support for Cryptographic Appliance's keyserver technology.
7858 (Use engine 'keyclient')
7859 [Cryptographic Appliances and Geoff Thorpe]
7861 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
7862 is called via tools/c89.sh because arguments have to be
7863 rearranged (all '-L' options must appear before the first object
7865 [Richard Shapiro <rshapiro@abinitio.com>]
7867 *) [In 0.9.6c-engine release:]
7868 Add support for Broadcom crypto accelerator cards, backported
7870 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
7872 *) [In 0.9.6c-engine release:]
7873 Add support for SureWare crypto accelerator cards from
7874 Baltimore Technologies. (Use engine 'sureware')
7875 [Baltimore Technologies and Mark Cox]
7877 *) [In 0.9.6c-engine release:]
7878 Add support for crypto accelerator cards from Accelerated
7879 Encryption Processing, www.aep.ie. (Use engine 'aep')
7880 [AEP Inc. and Mark Cox]
7882 *) Add a configuration entry for gcc on UnixWare.
7883 [Gary Benson <gbenson@redhat.com>]
7885 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
7886 messages are stored in a single piece (fixed-length part and
7887 variable-length part combined) and fix various bugs found on the way.
7890 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
7891 instead. BIO_gethostbyname() does not know what timeouts are
7892 appropriate, so entries would stay in cache even when they have
7894 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
7896 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
7897 faced with a pathologically small ClientHello fragment that does
7898 not contain client_version: Instead of aborting with an error,
7899 simply choose the highest available protocol version (i.e.,
7900 TLS 1.0 unless it is disabled). In practice, ClientHello
7901 messages are never sent like this, but this change gives us
7902 strictly correct behaviour at least for TLS.
7905 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
7906 never resets s->method to s->ctx->method when called from within
7907 one of the SSL handshake functions.
7908 [Bodo Moeller; problem pointed out by Niko Baric]
7910 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
7911 (sent using the client's version number) if client_version is
7912 smaller than the protocol version in use. Also change
7913 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
7914 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
7915 the client will at least see that alert.
7918 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
7922 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
7923 client receives HelloRequest while in a handshake.
7924 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
7926 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
7927 should end in 'break', not 'goto end' which circumvents various
7928 cleanups done in state SSL_ST_OK. But session related stuff
7929 must be disabled for SSL_ST_OK in the case that we just sent a
7932 Also avoid some overhead by not calling ssl_init_wbio_buffer()
7933 before just sending a HelloRequest.
7934 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
7936 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
7937 reveal whether illegal block cipher padding was found or a MAC
7938 verification error occurred. (Neither SSLerr() codes nor alerts
7939 are directly visible to potential attackers, but the information
7940 may leak via logfiles.)
7942 Similar changes are not required for the SSL 2.0 implementation
7943 because the number of padding bytes is sent in clear for SSL 2.0,
7944 and the extra bytes are just ignored. However ssl/s2_pkt.c
7945 failed to verify that the purported number of padding bytes is in
7949 *) Add OpenUNIX-8 support including shared libraries
7950 (Boyd Lynn Gerber <gerberb@zenez.com>).
7953 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
7954 'wristwatch attack' using huge encoding parameters (cf.
7955 James H. Manger's CRYPTO 2001 paper). Note that the
7956 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
7957 encoding parameters and hence was not vulnerable.
7960 *) BN_sqr() bug fix.
7961 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
7963 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
7964 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
7965 followed by modular reduction.
7966 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
7968 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
7969 equivalent based on BN_pseudo_rand() instead of BN_rand().
7972 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
7973 This function was broken, as the check for a new client hello message
7974 to handle SGC did not allow these large messages.
7975 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
7978 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
7981 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
7982 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
7985 *) Rework the configuration and shared library support for Tru64 Unix.
7986 The configuration part makes use of modern compiler features and
7987 still retains old compiler behavior for those that run older versions
7988 of the OS. The shared library support part includes a variant that
7989 uses the RPATH feature, and is available through the special
7990 configuration target "alpha-cc-rpath", which will never be selected
7992 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
7994 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
7995 with the same message size as in ssl3_get_certificate_request().
7996 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
7997 messages might inadvertently be reject as too long.
7998 [Petr Lampa <lampa@fee.vutbr.cz>]
8000 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
8003 *) Modified SSL library such that the verify_callback that has been set
8004 specificly for an SSL object with SSL_set_verify() is actually being
8005 used. Before the change, a verify_callback set with this function was
8006 ignored and the verify_callback() set in the SSL_CTX at the time of
8007 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
8008 to allow the necessary settings.
8011 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
8012 explicitly to NULL, as at least on Solaris 8 this seems not always to be
8013 done automatically (in contradiction to the requirements of the C
8014 standard). This made problems when used from OpenSSH.
8017 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
8018 dh->length and always used
8020 BN_rand_range(priv_key, dh->p).
8022 BN_rand_range() is not necessary for Diffie-Hellman, and this
8023 specific range makes Diffie-Hellman unnecessarily inefficient if
8024 dh->length (recommended exponent length) is much smaller than the
8025 length of dh->p. We could use BN_rand_range() if the order of
8026 the subgroup was stored in the DH structure, but we only have
8031 BN_rand(priv_key, l, ...)
8033 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
8039 RSA_eay_public_encrypt
8040 RSA_eay_private_decrypt
8041 RSA_eay_private_encrypt (signing)
8042 RSA_eay_public_decrypt (signature verification)
8044 (default implementations for RSA_public_encrypt,
8045 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
8046 always reject numbers >= n.
8049 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
8050 to synchronize access to 'locking_thread'. This is necessary on
8051 systems where access to 'locking_thread' (an 'unsigned long'
8052 variable) is not atomic.
8055 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
8056 *before* setting the 'crypto_lock_rand' flag. The previous code had
8057 a race condition if 0 is a valid thread ID.
8058 [Travis Vitek <vitek@roguewave.com>]
8060 *) Add support for shared libraries under Irix.
8061 [Albert Chin-A-Young <china@thewrittenword.com>]
8063 *) Add configuration option to build on Linux on both big-endian and
8065 [Ralf Baechle <ralf@uni-koblenz.de>]
8067 *) Add the possibility to create shared libraries on HP-UX.
8070 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
8072 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
8073 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
8074 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
8075 PRNG state recovery was possible based on the output of
8076 one PRNG request appropriately sized to gain knowledge on
8077 'md' followed by enough consecutive 1-byte PRNG requests
8078 to traverse all of 'state'.
8080 1. When updating 'md_local' (the current thread's copy of 'md')
8081 during PRNG output generation, hash all of the previous
8082 'md_local' value, not just the half used for PRNG output.
8084 2. Make the number of bytes from 'state' included into the hash
8085 independent from the number of PRNG bytes requested.
8087 The first measure alone would be sufficient to avoid
8088 Markku-Juhani's attack. (Actually it had never occurred
8089 to me that the half of 'md_local' used for chaining was the
8090 half from which PRNG output bytes were taken -- I had always
8091 assumed that the secret half would be used.) The second
8092 measure makes sure that additional data from 'state' is never
8093 mixed into 'md_local' in small portions; this heuristically
8094 further strengthens the PRNG.
8097 *) Fix crypto/bn/asm/mips3.s.
8100 *) When only the key is given to "enc", the IV is undefined. Print out
8101 an error message in this case.
8104 *) Handle special case when X509_NAME is empty in X509 printing routines.
8107 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
8108 positive and less than q.
8111 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
8112 used: it isn't thread safe and the add_lock_callback should handle
8114 [Paul Rose <Paul.Rose@bridge.com>]
8116 *) Verify that incoming data obeys the block size in
8117 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
8121 [Ulf Möller, Bodo Möller]
8123 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
8124 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
8125 when fixing the server behaviour for backwards-compatible 'client
8126 hello' messages. (Note that the attack is impractical against
8127 SSL 3.0 and TLS 1.0 anyway because length and version checking
8128 means that the probability of guessing a valid ciphertext is
8129 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
8132 Before 0.9.5, the countermeasure (hide the error by generating a
8133 random 'decryption result') did not work properly because
8134 ERR_clear_error() was missing, meaning that SSL_get_error() would
8135 detect the supposedly ignored error.
8137 Both problems are now fixed.
8140 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
8141 (previously it was 1024).
8144 *) Fix for compatibility mode trust settings: ignore trust settings
8145 unless some valid trust or reject settings are present.
8148 *) Fix for blowfish EVP: its a variable length cipher.
8151 *) Fix various bugs related to DSA S/MIME verification. Handle missing
8152 parameters in DSA public key structures and return an error in the
8153 DSA routines if parameters are absent.
8156 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
8157 in the current directory if neither $RANDFILE nor $HOME was set.
8158 RAND_file_name() in 0.9.6a returned NULL in this case. This has
8159 caused some confusion to Windows users who haven't defined $HOME.
8160 Thus RAND_file_name() is changed again: e_os.h can define a
8161 DEFAULT_HOME, which will be used if $HOME is not set.
8162 For Windows, we use "C:"; on other platforms, we still require
8163 environment variables.
8165 *) Move 'if (!initialized) RAND_poll()' into regions protected by
8166 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
8167 having multiple threads call RAND_poll() concurrently.
8170 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
8171 combination of a flag and a thread ID variable.
8172 Otherwise while one thread is in ssleay_rand_bytes (which sets the
8173 flag), *other* threads can enter ssleay_add_bytes without obeying
8174 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
8175 that they do not hold after the first thread unsets add_do_not_lock).
8178 *) Change bctest again: '-x' expressions are not available in all
8182 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
8184 *) Fix a couple of memory leaks in PKCS7_dataDecode()
8185 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
8187 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
8188 the default extension for executables, if any. Also, make the perl
8189 scripts that use symlink() to test if it really exists and use "cp"
8190 if it doesn't. All this made OpenSSL compilable and installable in
8194 *) Fix for asn1_GetSequence() for indefinite length constructed data.
8195 If SEQUENCE is length is indefinite just set c->slen to the total
8196 amount of data available.
8197 [Steve Henson, reported by shige@FreeBSD.org]
8198 [This change does not apply to 0.9.7.]
8200 *) Change bctest to avoid here-documents inside command substitution
8201 (workaround for FreeBSD /bin/sh bug).
8202 For compatibility with Ultrix, avoid shell functions (introduced
8203 in the bctest version that searches along $PATH).
8206 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
8207 with des_encrypt() defined on some operating systems, like Solaris
8211 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
8212 On the Importance of Eliminating Errors in Cryptographic
8213 Computations, J. Cryptology 14 (2001) 2, 101-119,
8214 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
8217 *) MIPS assembler BIGNUM division bug fix.
8220 *) Disabled incorrect Alpha assembler code.
8223 *) Fix PKCS#7 decode routines so they correctly update the length
8224 after reading an EOC for the EXPLICIT tag.
8226 [This change does not apply to 0.9.7.]
8228 *) Fix bug in PKCS#12 key generation routines. This was triggered
8229 if a 3DES key was generated with a 0 initial byte. Include
8230 PKCS12_BROKEN_KEYGEN compilation option to retain the old
8231 (but broken) behaviour.
8234 *) Enhance bctest to search for a working bc along $PATH and print
8236 [Tim Rice <tim@multitalents.net> via Richard Levitte]
8238 *) Fix memory leaks in err.c: free err_data string if necessary;
8239 don't write to the wrong index in ERR_set_error_data.
8242 *) Implement ssl23_peek (analogous to ssl23_read), which previously
8246 *) Replace rdtsc with _emit statements for VC++ version 5.
8247 [Jeremy Cooper <jeremy@baymoo.org>]
8249 *) Make it possible to reuse SSLv2 sessions.
8252 *) In copy_email() check for >= 0 as a return value for
8253 X509_NAME_get_index_by_NID() since 0 is a valid index.
8254 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
8256 *) Avoid coredump with unsupported or invalid public keys by checking if
8257 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
8258 PKCS7_verify() fails with non detached data.
8261 *) Don't use getenv in library functions when run as setuid/setgid.
8262 New function OPENSSL_issetugid().
8265 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
8266 due to incorrect handling of multi-threading:
8268 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
8270 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
8272 3. Count how many times MemCheck_off() has been called so that
8273 nested use can be treated correctly. This also avoids
8274 inband-signalling in the previous code (which relied on the
8275 assumption that thread ID 0 is impossible).
8278 *) Add "-rand" option also to s_client and s_server.
8281 *) Fix CPU detection on Irix 6.x.
8282 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
8283 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
8285 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
8288 [This change does not apply to 0.9.7.]
8290 *) Use the cached encoding of an X509_NAME structure rather than
8291 copying it. This is apparently the reason for the libsafe "errors"
8292 but the code is actually correct.
8295 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
8296 Bleichenbacher's DSA attack.
8297 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
8298 to be set and top=0 forces the highest bit to be set; top=-1 is new
8299 and leaves the highest bit random.
8300 [Ulf Moeller, Bodo Moeller]
8302 *) In the NCONF_...-based implementations for CONF_... queries
8303 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
8304 a temporary CONF structure with the data component set to NULL
8305 (which gives segmentation faults in lh_retrieve).
8306 Instead, use NULL for the CONF pointer in CONF_get_string and
8307 CONF_get_number (which may use environment variables) and directly
8308 return NULL from CONF_get_section.
8311 *) Fix potential buffer overrun for EBCDIC.
8314 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
8315 keyUsage if basicConstraints absent for a CA.
8318 *) Make SMIME_write_PKCS7() write mail header values with a format that
8319 is more generally accepted (no spaces before the semicolon), since
8320 some programs can't parse those values properly otherwise. Also make
8321 sure BIO's that break lines after each write do not create invalid
8325 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
8326 macros previously used would not encode an empty SEQUENCE OF
8327 and break the signature.
8329 [This change does not apply to 0.9.7.]
8331 *) Zero the premaster secret after deriving the master secret in
8335 *) Add some EVP_add_digest_alias registrations (as found in
8336 OpenSSL_add_all_digests()) to SSL_library_init()
8337 aka OpenSSL_add_ssl_algorithms(). This provides improved
8338 compatibility with peers using X.509 certificates
8339 with unconventional AlgorithmIdentifier OIDs.
8342 *) Fix for Irix with NO_ASM.
8343 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
8345 *) ./config script fixes.
8346 [Ulf Moeller, Richard Levitte]
8348 *) Fix 'openssl passwd -1'.
8351 *) Change PKCS12_key_gen_asc() so it can cope with non null
8352 terminated strings whose length is passed in the passlen
8353 parameter, for example from PEM callbacks. This was done
8354 by adding an extra length parameter to asc2uni().
8355 [Steve Henson, reported by <oddissey@samsung.co.kr>]
8357 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
8358 call failed, free the DSA structure.
8361 *) Fix to uni2asc() to cope with zero length Unicode strings.
8362 These are present in some PKCS#12 files.
8365 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
8366 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
8367 when writing a 32767 byte record.
8368 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
8370 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
8371 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
8373 (RSA objects have a reference count access to which is protected
8374 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
8375 so they are meant to be shared between threads.)
8376 [Bodo Moeller, Geoff Thorpe; original patch submitted by
8377 "Reddie, Steven" <Steven.Reddie@ca.com>]
8379 *) Fix a deadlock in CRYPTO_mem_leaks().
8382 *) Use better test patterns in bntest.
8385 *) rand_win.c fix for Borland C.
8388 *) BN_rshift bugfix for n == 0.
8391 *) Add a 'bctest' script that checks for some known 'bc' bugs
8392 so that 'make test' does not abort just because 'bc' is broken.
8395 *) Store verify_result within SSL_SESSION also for client side to
8396 avoid potential security hole. (Re-used sessions on the client side
8397 always resulted in verify_result==X509_V_OK, not using the original
8398 result of the server certificate verification.)
8401 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
8402 SSL3_RT_APPLICATION_DATA, return 0.
8403 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
8407 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
8408 releases, have been re-implemented by renaming the previous
8409 implementations of ssl2_read and ssl3_read to ssl2_read_internal
8410 and ssl3_read_internal, respectively, and adding 'peek' parameters
8411 to them. The new ssl[23]_{read,peek} functions are calls to
8412 ssl[23]_read_internal with the 'peek' flag set appropriately.
8413 A 'peek' parameter has also been added to ssl3_read_bytes, which
8414 does the actual work for ssl3_read_internal.
8417 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
8418 the method-specific "init()" handler. Also clean up ex_data after
8419 calling the method-specific "finish()" handler. Previously, this was
8420 happening the other way round.
8423 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
8424 The previous value, 12, was not always sufficient for BN_mod_exp().
8427 *) Make sure that shared libraries get the internal name engine with
8428 the full version number and not just 0. This should mark the
8429 shared libraries as not backward compatible. Of course, this should
8430 be changed again when we can guarantee backward binary compatibility.
8433 *) Fix typo in get_cert_by_subject() in by_dir.c
8434 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
8436 *) Rework the system to generate shared libraries:
8438 - Make note of the expected extension for the shared libraries and
8439 if there is a need for symbolic links from for example libcrypto.so.0
8440 to libcrypto.so.0.9.7. There is extended info in Configure for
8443 - Make as few rebuilds of the shared libraries as possible.
8445 - Still avoid linking the OpenSSL programs with the shared libraries.
8447 - When installing, install the shared libraries separately from the
8451 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
8453 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
8454 and not in SSL_clear because the latter is also used by the
8455 accept/connect functions; previously, the settings made by
8456 SSL_set_read_ahead would be lost during the handshake.
8457 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
8459 *) Correct util/mkdef.pl to be selective about disabled algorithms.
8460 Previously, it would create entries for disabled algorithms no
8464 *) Added several new manual pages for SSL_* function.
8467 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
8469 *) In ssl23_get_client_hello, generate an error message when faced
8470 with an initial SSL 3.0/TLS record that is too small to contain the
8471 first two bytes of the ClientHello message, i.e. client_version.
8472 (Note that this is a pathologic case that probably has never happened
8473 in real life.) The previous approach was to use the version number
8474 from the record header as a substitute; but our protocol choice
8475 should not depend on that one because it is not authenticated
8476 by the Finished messages.
8479 *) More robust randomness gathering functions for Windows.
8480 [Jeffrey Altman <jaltman@columbia.edu>]
8482 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
8483 not set then we don't setup the error code for issuer check errors
8484 to avoid possibly overwriting other errors which the callback does
8485 handle. If an application does set the flag then we assume it knows
8486 what it is doing and can handle the new informational codes
8490 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
8491 a general "ANY" type, as such it should be able to decode anything
8492 including tagged types. However it didn't check the class so it would
8493 wrongly interpret tagged types in the same way as their universal
8494 counterpart and unknown types were just rejected. Changed so that the
8495 tagged and unknown types are handled in the same way as a SEQUENCE:
8496 that is the encoding is stored intact. There is also a new type
8497 "V_ASN1_OTHER" which is used when the class is not universal, in this
8498 case we have no idea what the actual type is so we just lump them all
8502 *) On VMS, stdout may very well lead to a file that is written to
8503 in a record-oriented fashion. That means that every write() will
8504 write a separate record, which will be read separately by the
8505 programs trying to read from it. This can be very confusing.
8507 The solution is to put a BIO filter in the way that will buffer
8508 text until a linefeed is reached, and then write everything a
8509 line at a time, so every record written will be an actual line,
8510 not chunks of lines and not (usually doesn't happen, but I've
8511 seen it once) several lines in one record. BIO_f_linebuffer() is
8514 Currently, it's a VMS-only method, because that's where it has
8515 been tested well enough.
8518 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
8519 it can return incorrect results.
8520 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
8521 but it was in 0.9.6-beta[12].)
8524 *) Disable the check for content being present when verifying detached
8525 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
8526 include zero length content when signing messages.
8529 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
8530 BIO_ctrl (for BIO pairs).
8533 *) Add DSO method for VMS.
8536 *) Bug fix: Montgomery multiplication could produce results with the
8540 *) Add RPM specification openssl.spec and modify it to build three
8541 packages. The default package contains applications, application
8542 documentation and run-time libraries. The devel package contains
8543 include files, static libraries and function documentation. The
8544 doc package contains the contents of the doc directory. The original
8545 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
8548 *) Add a large number of documentation files for many SSL routines.
8549 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
8551 *) Add a configuration entry for Sony News 4.
8552 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
8554 *) Don't set the two most significant bits to one when generating a
8555 random number < q in the DSA library.
8558 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
8559 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
8560 the underlying transport is blocking) if a handshake took place.
8561 (The default behaviour is needed by applications such as s_client
8562 and s_server that use select() to determine when to use SSL_read;
8563 but for applications that know in advance when to expect data, it
8564 just makes things more complicated.)
8567 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
8571 *) Add a few more EBCDIC conditionals that make `req' and `x509'
8572 work better on such systems.
8573 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
8575 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
8576 Update PKCS12_parse() so it copies the friendlyName and the
8577 keyid to the certificates aux info.
8580 *) Fix bug in PKCS7_verify() which caused an infinite loop
8581 if there was more than one signature.
8582 [Sven Uszpelkat <su@celocom.de>]
8584 *) Major change in util/mkdef.pl to include extra information
8585 about each symbol, as well as presenting variables as well
8586 as functions. This change means that there's n more need
8587 to rebuild the .num files when some algorithms are excluded.
8590 *) Allow the verify time to be set by an application,
8591 rather than always using the current time.
8594 *) Phase 2 verify code reorganisation. The certificate
8595 verify code now looks up an issuer certificate by a
8596 number of criteria: subject name, authority key id
8597 and key usage. It also verifies self signed certificates
8598 by the same criteria. The main comparison function is
8599 X509_check_issued() which performs these checks.
8601 Lot of changes were necessary in order to support this
8602 without completely rewriting the lookup code.
8604 Authority and subject key identifier are now cached.
8606 The LHASH 'certs' is X509_STORE has now been replaced
8607 by a STACK_OF(X509_OBJECT). This is mainly because an
8608 LHASH can't store or retrieve multiple objects with
8609 the same hash value.
8611 As a result various functions (which were all internal
8612 use only) have changed to handle the new X509_STORE
8613 structure. This will break anything that messed round
8614 with X509_STORE internally.
8616 The functions X509_STORE_add_cert() now checks for an
8617 exact match, rather than just subject name.
8619 The X509_STORE API doesn't directly support the retrieval
8620 of multiple certificates matching a given criteria, however
8621 this can be worked round by performing a lookup first
8622 (which will fill the cache with candidate certificates)
8623 and then examining the cache for matches. This is probably
8624 the best we can do without throwing out X509_LOOKUP
8625 entirely (maybe later...).
8627 The X509_VERIFY_CTX structure has been enhanced considerably.
8629 All certificate lookup operations now go via a get_issuer()
8630 callback. Although this currently uses an X509_STORE it
8631 can be replaced by custom lookups. This is a simple way
8632 to bypass the X509_STORE hackery necessary to make this
8633 work and makes it possible to use more efficient techniques
8634 in future. A very simple version which uses a simple
8635 STACK for its trusted certificate store is also provided
8636 using X509_STORE_CTX_trusted_stack().
8638 The verify_cb() and verify() callbacks now have equivalents
8639 in the X509_STORE_CTX structure.
8641 X509_STORE_CTX also has a 'flags' field which can be used
8642 to customise the verify behaviour.
8645 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
8646 excludes S/MIME capabilities.
8649 *) When a certificate request is read in keep a copy of the
8650 original encoding of the signed data and use it when outputing
8651 again. Signatures then use the original encoding rather than
8652 a decoded, encoded version which may cause problems if the
8653 request is improperly encoded.
8656 *) For consistency with other BIO_puts implementations, call
8657 buffer_write(b, ...) directly in buffer_puts instead of calling
8660 In BIO_puts, increment b->num_write as in BIO_write.
8661 [Peter.Sylvester@EdelWeb.fr]
8663 *) Fix BN_mul_word for the case where the word is 0. (We have to use
8664 BN_zero, we may not return a BIGNUM with an array consisting of
8668 *) Avoid calling abort() from within the library when problems are
8669 detected, except if preprocessor symbols have been defined
8670 (such as REF_CHECK, BN_DEBUG etc.).
8673 *) New openssl application 'rsautl'. This utility can be
8674 used for low level RSA operations. DER public key
8675 BIO/fp routines also added.
8678 *) New Configure entry and patches for compiling on QNX 4.
8679 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
8681 *) A demo state-machine implementation was sponsored by
8682 Nuron (http://www.nuron.com/) and is now available in
8683 demos/state_machine.
8686 *) New options added to the 'dgst' utility for signature
8687 generation and verification.
8690 *) Unrecognized PKCS#7 content types are now handled via a
8691 catch all ASN1_TYPE structure. This allows unsupported
8692 types to be stored as a "blob" and an application can
8693 encode and decode it manually.
8696 *) Fix various signed/unsigned issues to make a_strex.c
8698 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
8700 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
8701 length if passed a buffer. ASN1_INTEGER_to_BN failed
8702 if passed a NULL BN and its argument was negative.
8703 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
8705 *) Modification to PKCS#7 encoding routines to output definite
8706 length encoding. Since currently the whole structures are in
8707 memory there's not real point in using indefinite length
8708 constructed encoding. However if OpenSSL is compiled with
8709 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
8712 *) Added BIO_vprintf() and BIO_vsnprintf().
8715 *) Added more prefixes to parse for in the the strings written
8716 through a logging bio, to cover all the levels that are available
8717 through syslog. The prefixes are now:
8719 PANIC, EMERG, EMR => LOG_EMERG
8720 ALERT, ALR => LOG_ALERT
8721 CRIT, CRI => LOG_CRIT
8722 ERROR, ERR => LOG_ERR
8723 WARNING, WARN, WAR => LOG_WARNING
8724 NOTICE, NOTE, NOT => LOG_NOTICE
8725 INFO, INF => LOG_INFO
8726 DEBUG, DBG => LOG_DEBUG
8728 and as before, if none of those prefixes are present at the
8729 beginning of the string, LOG_ERR is chosen.
8731 On Win32, the LOG_* levels are mapped according to this:
8733 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
8734 LOG_WARNING => EVENTLOG_WARNING_TYPE
8735 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
8739 *) Made it possible to reconfigure with just the configuration
8740 argument "reconf" or "reconfigure". The command line arguments
8741 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
8742 and are retrieved from there when reconfiguring.
8746 [Assar Westerlund <assar@sics.se>, Richard Levitte]
8748 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
8751 *) The obj_dat.pl script was messing up the sorting of object
8752 names. The reason was that it compared the quoted version
8753 of strings as a result "OCSP" > "OCSP Signing" because
8754 " > SPACE. Changed script to store unquoted versions of
8755 names and add quotes on output. It was also omitting some
8756 names from the lookup table if they were given a default
8757 value (that is if SN is missing it is given the same
8758 value as LN and vice versa), these are now added on the
8759 grounds that if an object has a name we should be able to
8760 look it up. Finally added warning output when duplicate
8761 short or long names are found.
8764 *) Changes needed for Tandem NSK.
8765 [Scott Uroff <scott@xypro.com>]
8767 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
8768 RSA_padding_check_SSLv23(), special padding was never detected
8769 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
8770 version rollback attacks was not effective.
8772 In s23_clnt.c, don't use special rollback-attack detection padding
8773 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
8774 client; similarly, in s23_srvr.c, don't do the rollback check if
8775 SSL 2.0 is the only protocol enabled in the server.
8778 *) Make it possible to get hexdumps of unprintable data with 'openssl
8779 asn1parse'. By implication, the functions ASN1_parse_dump() and
8780 BIO_dump_indent() are added.
8783 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
8784 these print out strings and name structures based on various
8785 flags including RFC2253 support and proper handling of
8786 multibyte characters. Added options to the 'x509' utility
8787 to allow the various flags to be set.
8790 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
8791 Also change the functions X509_cmp_current_time() and
8792 X509_gmtime_adj() work with an ASN1_TIME structure,
8793 this will enable certificates using GeneralizedTime in validity
8794 dates to be checked.
8797 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
8798 negative public key encodings) on by default,
8799 NO_NEG_PUBKEY_BUG can be set to disable it.
8802 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
8803 content octets. An i2c_ASN1_OBJECT is unnecessary because
8804 the encoding can be trivially obtained from the structure.
8807 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
8808 not read locks (CRYPTO_r_[un]lock).
8811 *) A first attempt at creating official support for shared
8812 libraries through configuration. I've kept it so the
8813 default is static libraries only, and the OpenSSL programs
8814 are always statically linked for now, but there are
8815 preparations for dynamic linking in place.
8816 This has been tested on Linux and Tru64.
8819 *) Randomness polling function for Win9x, as described in:
8820 Peter Gutmann, Software Generation of Practically Strong
8824 *) Fix so PRNG is seeded in req if using an already existing
8828 *) New options to smime application. -inform and -outform
8829 allow alternative formats for the S/MIME message including
8830 PEM and DER. The -content option allows the content to be
8831 specified separately. This should allow things like Netscape
8832 form signing output easier to verify.
8835 *) Fix the ASN1 encoding of tags using the 'long form'.
8838 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
8839 STRING types. These convert content octets to and from the
8840 underlying type. The actual tag and length octets are
8841 already assumed to have been read in and checked. These
8842 are needed because all other string types have virtually
8843 identical handling apart from the tag. By having versions
8844 of the ASN1 functions that just operate on content octets
8845 IMPLICIT tagging can be handled properly. It also allows
8846 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
8847 and ASN1_INTEGER are identical apart from the tag.
8850 *) Change the handling of OID objects as follows:
8852 - New object identifiers are inserted in objects.txt, following
8853 the syntax given in objects.README.
8854 - objects.pl is used to process obj_mac.num and create a new
8856 - obj_dat.pl is used to create a new obj_dat.h, using the data in
8859 This is currently kind of a hack, and the perl code in objects.pl
8860 isn't very elegant, but it works as I intended. The simplest way
8861 to check that it worked correctly is to look in obj_dat.h and
8862 check the array nid_objs and make sure the objects haven't moved
8863 around (this is important!). Additions are OK, as well as
8864 consistent name changes.
8867 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
8870 *) Addition of the command line parameter '-rand file' to 'openssl req'.
8871 The given file adds to whatever has already been seeded into the
8872 random pool through the RANDFILE configuration file option or
8873 environment variable, or the default random state file.
8876 *) mkstack.pl now sorts each macro group into lexical order.
8877 Previously the output order depended on the order the files
8878 appeared in the directory, resulting in needless rewriting
8882 *) Patches to make OpenSSL compile under Win32 again. Mostly
8883 work arounds for the VC++ problem that it treats func() as
8884 func(void). Also stripped out the parts of mkdef.pl that
8885 added extra typesafe functions: these no longer exist.
8888 *) Reorganisation of the stack code. The macros are now all
8889 collected in safestack.h . Each macro is defined in terms of
8890 a "stack macro" of the form SKM_<name>(type, a, b). The
8891 DEBUG_SAFESTACK is now handled in terms of function casts,
8892 this has the advantage of retaining type safety without the
8893 use of additional functions. If DEBUG_SAFESTACK is not defined
8894 then the non typesafe macros are used instead. Also modified the
8895 mkstack.pl script to handle the new form. Needs testing to see
8896 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
8897 the default if no major problems. Similar behaviour for ASN1_SET_OF
8898 and PKCS12_STACK_OF.
8901 *) When some versions of IIS use the 'NET' form of private key the
8902 key derivation algorithm is different. Normally MD5(password) is
8903 used as a 128 bit RC4 key. In the modified case
8904 MD5(MD5(password) + "SGCKEYSALT") is used instead. Added some
8905 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
8906 as the old Netscape_RSA functions except they have an additional
8907 'sgckey' parameter which uses the modified algorithm. Also added
8908 an -sgckey command line option to the rsa utility. Thanks to
8909 Adrian Peck <bertie@ncipher.com> for posting details of the modified
8910 algorithm to openssl-dev.
8913 *) The evp_local.h macros were using 'c.##kname' which resulted in
8914 invalid expansion on some systems (SCO 5.0.5 for example).
8915 Corrected to 'c.kname'.
8916 [Phillip Porch <root@theporch.com>]
8918 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
8919 a STACK of email addresses from a certificate or request, these look
8920 in the subject name and the subject alternative name extensions and
8921 omit any duplicate addresses.
8924 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
8925 This makes DSA verification about 2 % faster.
8928 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
8929 (meaning that now 2^5 values will be precomputed, which is only 4 KB
8930 plus overhead for 1024 bit moduli).
8931 This makes exponentiations about 0.5 % faster for 1024 bit
8932 exponents (as measured by "openssl speed rsa2048").
8935 *) Rename memory handling macros to avoid conflicts with other
8937 Malloc => OPENSSL_malloc
8938 Malloc_locked => OPENSSL_malloc_locked
8939 Realloc => OPENSSL_realloc
8940 Free => OPENSSL_free
8943 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
8944 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
8947 *) CygWin32 support.
8948 [John Jarvie <jjarvie@newsguy.com>]
8950 *) The type-safe stack code has been rejigged. It is now only compiled
8951 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
8952 by default all type-specific stack functions are "#define"d back to
8953 standard stack functions. This results in more streamlined output
8954 but retains the type-safety checking possibilities of the original
8958 *) The STACK code has been cleaned up, and certain type declarations
8959 that didn't make a lot of sense have been brought in line. This has
8960 also involved a cleanup of sorts in safestack.h to more correctly
8961 map type-safe stack functions onto their plain stack counterparts.
8962 This work has also resulted in a variety of "const"ifications of
8963 lots of the code, especially "_cmp" operations which should normally
8964 be prototyped with "const" parameters anyway.
8967 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
8968 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
8969 (The PRNG state consists of two parts, the large pool 'state' and 'md',
8970 where all of 'md' is used each time the PRNG is used, but 'state'
8971 is used only indexed by a cyclic counter. As entropy may not be
8972 well distributed from the beginning, 'md' is important as a
8973 chaining variable. However, the output function chains only half
8974 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
8975 all of 'md', and seeding with STATE_SIZE dummy bytes will result
8976 in all of 'state' being rewritten, with the new values depending
8977 on virtually all of 'md'. This overcomes the 80 bit limitation.)
8980 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
8981 the handshake is continued after ssl_verify_cert_chain();
8982 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
8983 can lead to 'unexplainable' connection aborts later.
8984 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
8986 *) Major EVP API cipher revision.
8987 Add hooks for extra EVP features. This allows various cipher
8988 parameters to be set in the EVP interface. Support added for variable
8989 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
8990 setting of RC2 and RC5 parameters.
8992 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
8995 Remove lots of duplicated code from the EVP library. For example *every*
8996 cipher init() function handles the 'iv' in the same way according to the
8997 cipher mode. They also all do nothing if the 'key' parameter is NULL and
8998 for CFB and OFB modes they zero ctx->num.
9000 New functionality allows removal of S/MIME code RC2 hack.
9002 Most of the routines have the same form and so can be declared in terms
9005 By shifting this to the top level EVP_CipherInit() it can be removed from
9006 all individual ciphers. If the cipher wants to handle IVs or keys
9007 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
9010 Change lots of functions like EVP_EncryptUpdate() to now return a
9011 value: although software versions of the algorithms cannot fail
9012 any installed hardware versions can.
9015 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
9016 this option is set, tolerate broken clients that send the negotiated
9017 protocol version number instead of the requested protocol version
9021 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
9022 i.e. non-zero for export ciphersuites, zero otherwise.
9023 Previous versions had this flag inverted, inconsistent with
9024 rsa_tmp_cb (..._TMP_RSA_CB).
9025 [Bodo Moeller; problem reported by Amit Chopra]
9027 *) Add missing DSA library text string. Work around for some IIS
9028 key files with invalid SEQUENCE encoding.
9031 *) Add a document (doc/standards.txt) that list all kinds of standards
9032 and so on that are implemented in OpenSSL.
9035 *) Enhance c_rehash script. Old version would mishandle certificates
9036 with the same subject name hash and wouldn't handle CRLs at all.
9037 Added -fingerprint option to crl utility, to support new c_rehash
9041 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
9044 *) Fix for SSL server purpose checking. Server checking was
9045 rejecting certificates which had extended key usage present
9046 but no ssl client purpose.
9047 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
9049 *) Make PKCS#12 code work with no password. The PKCS#12 spec
9050 is a little unclear about how a blank password is handled.
9051 Since the password in encoded as a BMPString with terminating
9052 double NULL a zero length password would end up as just the
9053 double NULL. However no password at all is different and is
9054 handled differently in the PKCS#12 key generation code. NS
9055 treats a blank password as zero length. MSIE treats it as no
9056 password on export: but it will try both on import. We now do
9057 the same: PKCS12_parse() tries zero length and no password if
9058 the password is set to "" or NULL (NULL is now a valid password:
9059 it wasn't before) as does the pkcs12 application.
9062 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
9063 perror when PEM_read_bio_X509_REQ fails, the error message must
9064 be obtained from the error queue.
9067 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
9068 it in ERR_remove_state if appropriate, and change ERR_get_state
9069 accordingly to avoid race conditions (this is necessary because
9070 thread_hash is no longer constant once set).
9073 *) Bugfix for linux-elf makefile.one.
9076 *) RSA_get_default_method() will now cause a default
9077 RSA_METHOD to be chosen if one doesn't exist already.
9078 Previously this was only set during a call to RSA_new()
9079 or RSA_new_method(NULL) meaning it was possible for
9080 RSA_get_default_method() to return NULL.
9083 *) Added native name translation to the existing DSO code
9084 that will convert (if the flag to do so is set) filenames
9085 that are sufficiently small and have no path information
9086 into a canonical native form. Eg. "blah" converted to
9087 "libblah.so" or "blah.dll" etc.
9090 *) New function ERR_error_string_n(e, buf, len) which is like
9091 ERR_error_string(e, buf), but writes at most 'len' bytes
9092 including the 0 terminator. For ERR_error_string_n, 'buf'
9094 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
9096 *) CONF library reworked to become more general. A new CONF
9097 configuration file reader "class" is implemented as well as a
9098 new functions (NCONF_*, for "New CONF") to handle it. The now
9099 old CONF_* functions are still there, but are reimplemented to
9100 work in terms of the new functions. Also, a set of functions
9101 to handle the internal storage of the configuration data is
9102 provided to make it easier to write new configuration file
9103 reader "classes" (I can definitely see something reading a
9104 configuration file in XML format, for example), called _CONF_*,
9105 or "the configuration storage API"...
9107 The new configuration file reading functions are:
9109 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
9110 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
9112 NCONF_default, NCONF_WIN32
9114 NCONF_dump_fp, NCONF_dump_bio
9116 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
9117 NCONF_new creates a new CONF object. This works in the same way
9118 as other interfaces in OpenSSL, like the BIO interface.
9119 NCONF_dump_* dump the internal storage of the configuration file,
9120 which is useful for debugging. All other functions take the same
9121 arguments as the old CONF_* functions wth the exception of the
9122 first that must be a `CONF *' instead of a `LHASH *'.
9124 To make it easer to use the new classes with the old CONF_* functions,
9125 the function CONF_set_default_method is provided.
9128 *) Add '-tls1' option to 'openssl ciphers', which was already
9129 mentioned in the documentation but had not been implemented.
9130 (This option is not yet really useful because even the additional
9131 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
9134 *) Initial DSO code added into libcrypto for letting OpenSSL (and
9135 OpenSSL-based applications) load shared libraries and bind to
9136 them in a portable way.
9137 [Geoff Thorpe, with contributions from Richard Levitte]
9139 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
9141 *) Make sure _lrotl and _lrotr are only used with MSVC.
9143 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
9144 (the default implementation of RAND_status).
9146 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
9147 to '-clrext' (= clear extensions), as intended and documented.
9148 [Bodo Moeller; inconsistency pointed out by Michael Attili
9151 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
9152 was larger than the MD block size.
9153 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
9155 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
9156 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
9157 using the passed key: if the passed key was a private key the result
9158 of X509_print(), for example, would be to print out all the private key
9162 *) des_quad_cksum() byte order bug fix.
9163 [Ulf Möller, using the problem description in krb4-0.9.7, where
9164 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
9166 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
9168 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
9170 *) For easily testing in shell scripts whether some command
9171 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
9172 returns with exit code 0 iff no command of the given name is available.
9173 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
9174 the output goes to stdout and nothing is printed to stderr.
9175 Additional arguments are always ignored.
9177 Since for each cipher there is a command of the same name,
9178 the 'no-cipher' compilation switches can be tested this way.
9180 ('openssl no-XXX' is not able to detect pseudo-commands such
9181 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
9184 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
9187 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
9188 is set; it will be thrown away anyway because each handshake creates
9190 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
9191 to parameters -- in previous versions (since OpenSSL 0.9.3) the
9192 'default key' from SSL_CTX_set_tmp_dh would always be lost, meaning
9193 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
9196 *) New s_client option -ign_eof: EOF at stdin is ignored, and
9197 'Q' and 'R' lose their special meanings (quit/renegotiate).
9198 This is part of what -quiet does; unlike -quiet, -ign_eof
9199 does not suppress any output.
9202 *) Add compatibility options to the purpose and trust code. The
9203 purpose X509_PURPOSE_ANY is "any purpose" which automatically
9204 accepts a certificate or CA, this was the previous behaviour,
9205 with all the associated security issues.
9207 X509_TRUST_COMPAT is the old trust behaviour: only and
9208 automatically trust self signed roots in certificate store. A
9209 new trust setting X509_TRUST_DEFAULT is used to specify that
9210 a purpose has no associated trust setting and it should instead
9211 use the value in the default purpose.
9214 *) Fix the PKCS#8 DSA private key code so it decodes keys again
9215 and fix a memory leak.
9218 *) In util/mkerr.pl (which implements 'make errors'), preserve
9219 reason strings from the previous version of the .c file, as
9220 the default to have only downcase letters (and digits) in
9221 automatically generated reasons codes is not always appropriate.
9224 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
9225 using strerror. Previously, ERR_reason_error_string() returned
9226 library names as reason strings for SYSerr; but SYSerr is a special
9227 case where small numbers are errno values, not library numbers.
9230 *) Add '-dsaparam' option to 'openssl dhparam' application. This
9231 converts DSA parameters into DH parameters. (When creating parameters,
9232 DSA_generate_parameters is used.)
9235 *) Include 'length' (recommended exponent length) in C code generated
9236 by 'openssl dhparam -C'.
9239 *) The second argument to set_label in perlasm was already being used
9240 so couldn't be used as a "file scope" flag. Moved to third argument
9244 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
9245 instead of RAND_bytes for encryption IVs and salts.
9248 *) Include RAND_status() into RAND_METHOD instead of implementing
9249 it only for md_rand.c Otherwise replacing the PRNG by calling
9250 RAND_set_rand_method would be impossible.
9253 *) Don't let DSA_generate_key() enter an infinite loop if the random
9254 number generation fails.
9257 *) New 'rand' application for creating pseudo-random output.
9260 *) Added configuration support for Linux/IA64
9261 [Rolf Haberrecker <rolf@suse.de>]
9263 *) Assembler module support for Mingw32.
9266 *) Shared library support for HPUX (in shlib/).
9267 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
9269 *) Shared library support for Solaris gcc.
9270 [Lutz Behnke <behnke@trustcenter.de>]
9272 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
9274 *) PKCS7_encrypt() was adding text MIME headers twice because they
9275 were added manually and by SMIME_crlf_copy().
9278 *) In bntest.c don't call BN_rand with zero bits argument.
9279 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
9281 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
9282 case was implemented. This caused BN_div_recp() to fail occasionally.
9285 *) Add an optional second argument to the set_label() in the perl
9286 assembly language builder. If this argument exists and is set
9287 to 1 it signals that the assembler should use a symbol whose
9288 scope is the entire file, not just the current function. This
9289 is needed with MASM which uses the format label:: for this scope.
9290 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
9292 *) Change the ASN1 types so they are typedefs by default. Before
9293 almost all types were #define'd to ASN1_STRING which was causing
9294 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
9298 *) Change names of new functions to the new get1/get0 naming
9299 convention: After 'get1', the caller owns a reference count
9300 and has to call ..._free; 'get0' returns a pointer to some
9301 data structure without incrementing reference counters.
9302 (Some of the existing 'get' functions increment a reference
9303 counter, some don't.)
9304 Similarly, 'set1' and 'add1' functions increase reference
9305 counters or duplicate objects.
9308 *) Allow for the possibility of temp RSA key generation failure:
9309 the code used to assume it always worked and crashed on failure.
9312 *) Fix potential buffer overrun problem in BIO_printf().
9313 [Ulf Möller, using public domain code by Patrick Powell; problem
9314 pointed out by David Sacerdote <das33@cornell.edu>]
9316 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
9317 RAND_egd() and RAND_status(). In the command line application,
9318 the EGD socket can be specified like a seed file using RANDFILE
9322 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
9323 Some CAs (e.g. Verisign) distribute certificates in this form.
9326 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
9327 list to exclude them. This means that no special compilation option
9328 is needed to use anonymous DH: it just needs to be included in the
9332 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
9333 EVP_MD_type. The old functionality is available in a new macro called
9334 EVP_MD_md(). Change code that uses it and update docs.
9337 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
9338 where the 'void *' argument is replaced by a function pointer argument.
9339 Previously 'void *' was abused to point to functions, which works on
9340 many platforms, but is not correct. As these functions are usually
9341 called by macros defined in OpenSSL header files, most source code
9342 should work without changes.
9345 *) <openssl/opensslconf.h> (which is created by Configure) now contains
9346 sections with information on -D... compiler switches used for
9347 compiling the library so that applications can see them. To enable
9348 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
9349 must be defined. E.g.,
9350 #define OPENSSL_ALGORITHM_DEFINES
9351 #include <openssl/opensslconf.h>
9352 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
9353 [Richard Levitte, Ulf and Bodo Möller]
9355 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
9359 *) Change the 'other' type in certificate aux info to a STACK_OF
9360 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
9361 the required ASN1 format: arbitrary types determined by an OID.
9364 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
9365 argument to 'req'. This is not because the function is newer or
9366 better than others it just uses the work 'NEW' in the certificate
9367 request header lines. Some software needs this.
9370 *) Reorganise password command line arguments: now passwords can be
9371 obtained from various sources. Delete the PEM_cb function and make
9372 it the default behaviour: i.e. if the callback is NULL and the
9373 usrdata argument is not NULL interpret it as a null terminated pass
9374 phrase. If usrdata and the callback are NULL then the pass phrase
9375 is prompted for as usual.
9378 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
9379 the support is automatically enabled. The resulting binaries will
9380 autodetect the card and use it if present.
9381 [Ben Laurie and Compaq Inc.]
9383 *) Work around for Netscape hang bug. This sends certificate request
9384 and server done in one record. Since this is perfectly legal in the
9385 SSL/TLS protocol it isn't a "bug" option and is on by default. See
9386 the bugs/SSLv3 entry for more info.
9389 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
9392 *) Add -rand argument to smime and pkcs12 applications and read/write
9396 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
9399 *) Add command line password options to the remaining applications.
9402 *) Bug fix for BN_div_recp() for numerators with an even number of
9406 *) More tests in bntest.c, and changed test_bn output.
9409 *) ./config recognizes MacOS X now.
9412 *) Bug fix for BN_div() when the first words of num and divsor are
9413 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
9416 *) Add support for various broken PKCS#8 formats, and command line
9417 options to produce them.
9420 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
9421 get temporary BIGNUMs from a BN_CTX.
9424 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
9428 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
9429 include a #define from the old name to the new. The original intent
9430 was that statically linked binaries could for example just call
9431 SSLeay_add_all_ciphers() to just add ciphers to the table and not
9432 link with digests. This never worked because SSLeay_add_all_digests()
9433 and SSLeay_add_all_ciphers() were in the same source file so calling
9434 one would link with the other. They are now in separate source files.
9437 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
9440 *) Use a less unusual form of the Miller-Rabin primality test (it used
9441 a binary algorithm for exponentiation integrated into the Miller-Rabin
9442 loop, our standard modexp algorithms are faster).
9445 *) Support for the EBCDIC character set completed.
9446 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
9448 *) Source code cleanups: use const where appropriate, eliminate casts,
9449 use void * instead of char * in lhash.
9452 *) Bugfix: ssl3_send_server_key_exchange was not restartable
9453 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
9454 this the server could overwrite ephemeral keys that the client
9458 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
9459 using 50 iterations of the Rabin-Miller test.
9461 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
9462 iterations of the Rabin-Miller test as required by the appendix
9463 to FIPS PUB 186[-1]) instead of DSA_is_prime.
9464 As BN_is_prime_fasttest includes trial division, DSA parameter
9465 generation becomes much faster.
9467 This implies a change for the callback functions in DSA_is_prime
9468 and DSA_generate_parameters: The callback function is called once
9469 for each positive witness in the Rabin-Miller test, not just
9470 occasionally in the inner loop; and the parameters to the
9471 callback function now provide an iteration count for the outer
9472 loop rather than for the current invocation of the inner loop.
9473 DSA_generate_parameters additionally can call the callback
9474 function with an 'iteration count' of -1, meaning that a
9475 candidate has passed the trial division test (when q is generated
9476 from an application-provided seed, trial division is skipped).
9479 *) New function BN_is_prime_fasttest that optionally does trial
9480 division before starting the Rabin-Miller test and has
9481 an additional BN_CTX * argument (whereas BN_is_prime always
9482 has to allocate at least one BN_CTX).
9483 'callback(1, -1, cb_arg)' is called when a number has passed the
9484 trial division stage.
9487 *) Fix for bug in CRL encoding. The validity dates weren't being handled
9491 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
9494 *) New function BN_pseudo_rand().
9497 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
9498 bignum version of BN_from_montgomery() with the working code from
9499 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
9503 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
9504 made it impossible to use the same SSL_SESSION data structure in
9505 SSL2 clients in multiple threads.
9508 *) The return value of RAND_load_file() no longer counts bytes obtained
9509 by stat(). RAND_load_file(..., -1) is new and uses the complete file
9510 to seed the PRNG (previously an explicit byte count was required).
9511 [Ulf Möller, Bodo Möller]
9513 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
9514 used (char *) instead of (void *) and had casts all over the place.
9517 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
9520 *) Retain source code compatibility for BN_prime_checks macro:
9521 BN_is_prime(..., BN_prime_checks, ...) now uses
9522 BN_prime_checks_for_size to determine the appropriate number of
9523 Rabin-Miller iterations.
9526 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
9527 DH_CHECK_P_NOT_SAFE_PRIME.
9528 (Check if this is true? OpenPGP calls them "strong".)
9531 *) Merge the functionality of "dh" and "gendh" programs into a new program
9532 "dhparam". The old programs are retained for now but will handle DH keys
9533 (instead of parameters) in future.
9536 *) Make the ciphers, s_server and s_client programs check the return values
9537 when a new cipher list is set.
9540 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
9541 ciphers. Before when the 56bit ciphers were enabled the sorting was
9544 The syntax for the cipher sorting has been extended to support sorting by
9545 cipher-strength (using the strength_bits hard coded in the tables).
9546 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
9548 Fix a bug in the cipher-command parser: when supplying a cipher command
9549 string with an "undefined" symbol (neither command nor alphanumeric
9550 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
9551 an error is flagged.
9553 Due to the strength-sorting extension, the code of the
9554 ssl_create_cipher_list() function was completely rearranged. I hope that
9555 the readability was also increased :-)
9556 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
9558 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
9559 for the first serial number and places 2 in the serial number file. This
9560 avoids problems when the root CA is created with serial number zero and
9561 the first user certificate has the same issuer name and serial number
9565 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
9566 the new code. Add documentation for this stuff.
9569 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
9570 X509_*() to X509at_*() on the grounds that they don't handle X509
9571 structures and behave in an analogous way to the X509v3 functions:
9572 they shouldn't be called directly but wrapper functions should be used
9575 So we also now have some wrapper functions that call the X509at functions
9576 when passed certificate requests. (TO DO: similar things can be done with
9577 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
9578 things. Some of these need some d2i or i2d and print functionality
9579 because they handle more complex structures.)
9582 *) Add missing #ifndefs that caused missing symbols when building libssl
9583 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
9584 NO_RSA in ssl/s2*.c.
9585 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
9587 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
9588 has a return value which indicates the quality of the random data
9589 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
9590 error queue. New function RAND_pseudo_bytes() generates output that is
9591 guaranteed to be unique but not unpredictable. RAND_add is like
9592 RAND_seed, but takes an extra argument for an entropy estimate
9593 (RAND_seed always assumes full entropy).
9596 *) Do more iterations of Rabin-Miller probable prime test (specifically,
9597 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
9598 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
9599 in crypto/bn/bn_prime.c for the complete table). This guarantees a
9600 false-positive rate of at most 2^-80 for random input.
9603 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
9606 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
9607 in the 0.9.5 release), this returns the chain
9608 from an X509_CTX structure with a dup of the stack and all
9609 the X509 reference counts upped: so the stack will exist
9610 after X509_CTX_cleanup() has been called. Modify pkcs12.c
9613 Also make SSL_SESSION_print() print out the verify return
9617 *) Add manpage for the pkcs12 command. Also change the default
9618 behaviour so MAC iteration counts are used unless the new
9619 -nomaciter option is used. This improves file security and
9620 only older versions of MSIE (4.0 for example) need it.
9623 *) Honor the no-xxx Configure options when creating .DEF files.
9626 *) Add PKCS#10 attributes to field table: challengePassword,
9627 unstructuredName and unstructuredAddress. These are taken from
9628 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
9629 international characters are used.
9631 More changes to X509_ATTRIBUTE code: allow the setting of types
9632 based on strings. Remove the 'loc' parameter when adding
9633 attributes because these will be a SET OF encoding which is sorted
9637 *) Initial changes to the 'req' utility to allow request generation
9638 automation. This will allow an application to just generate a template
9639 file containing all the field values and have req construct the
9642 Initial support for X509_ATTRIBUTE handling. Stacks of these are
9643 used all over the place including certificate requests and PKCS#7
9644 structures. They are currently handled manually where necessary with
9645 some primitive wrappers for PKCS#7. The new functions behave in a
9646 manner analogous to the X509 extension functions: they allow
9647 attributes to be looked up by NID and added.
9649 Later something similar to the X509V3 code would be desirable to
9650 automatically handle the encoding, decoding and printing of the
9651 more complex types. The string types like challengePassword can
9652 be handled by the string table functions.
9654 Also modified the multi byte string table handling. Now there is
9655 a 'global mask' which masks out certain types. The table itself
9656 can use the flag STABLE_NO_MASK to ignore the mask setting: this
9657 is useful when for example there is only one permissible type
9658 (as in countryName) and using the mask might result in no valid
9662 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
9663 SSL_get_peer_finished to allow applications to obtain the latest
9664 Finished messages sent to the peer or expected from the peer,
9665 respectively. (SSL_get_peer_finished is usually the Finished message
9666 actually received from the peer, otherwise the protocol will be aborted.)
9668 As the Finished message are message digests of the complete handshake
9669 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
9670 be used for external authentication procedures when the authentication
9671 provided by SSL/TLS is not desired or is not enough.
9674 *) Enhanced support for Alpha Linux is added. Now ./config checks if
9675 the host supports BWX extension and if Compaq C is present on the
9676 $PATH. Just exploiting of the BWX extension results in 20-30%
9677 performance kick for some algorithms, e.g. DES and RC4 to mention
9678 a couple. Compaq C in turn generates ~20% faster code for MD5 and
9682 *) Add support for MS "fast SGC". This is arguably a violation of the
9683 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
9684 weak crypto and after checking the certificate is SGC a second one
9685 with strong crypto. MS SGC stops the first handshake after receiving
9686 the server certificate message and sends a second client hello. Since
9687 a server will typically do all the time consuming operations before
9688 expecting any further messages from the client (server key exchange
9689 is the most expensive) there is little difference between the two.
9691 To get OpenSSL to support MS SGC we have to permit a second client
9692 hello message after we have sent server done. In addition we have to
9693 reset the MAC if we do get this second client hello.
9696 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
9697 if a DER encoded private key is RSA or DSA traditional format. Changed
9698 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
9699 format DER encoded private key. Newer code should use PKCS#8 format which
9700 has the key type encoded in the ASN1 structure. Added DER private key
9701 support to pkcs8 application.
9704 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
9705 ciphersuites has been selected (as required by the SSL 3/TLS 1
9706 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
9707 is set, we interpret this as a request to violate the specification
9708 (the worst that can happen is a handshake failure, and 'correct'
9709 behaviour would result in a handshake failure anyway).
9712 *) In SSL_CTX_add_session, take into account that there might be multiple
9713 SSL_SESSION structures with the same session ID (e.g. when two threads
9714 concurrently obtain them from an external cache).
9715 The internal cache can handle only one SSL_SESSION with a given ID,
9716 so if there's a conflict, we now throw out the old one to achieve
9720 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
9721 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
9722 some routines that use cipher OIDs: some ciphers do not have OIDs
9723 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
9727 *) Simplify the trust setting structure and code. Now we just have
9728 two sequences of OIDs for trusted and rejected settings. These will
9729 typically have values the same as the extended key usage extension
9730 and any application specific purposes.
9732 The trust checking code now has a default behaviour: it will just
9733 check for an object with the same NID as the passed id. Functions can
9734 be provided to override either the default behaviour or the behaviour
9735 for a given id. SSL client, server and email already have functions
9736 in place for compatibility: they check the NID and also return "trusted"
9737 if the certificate is self signed.
9740 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
9741 traditional format into an EVP_PKEY structure.
9744 *) Add a password callback function PEM_cb() which either prompts for
9745 a password if usr_data is NULL or otherwise assumes it is a null
9746 terminated password. Allow passwords to be passed on command line
9747 environment or config files in a few more utilities.
9750 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
9751 keys. Add some short names for PKCS#8 PBE algorithms and allow them
9752 to be specified on the command line for the pkcs8 and pkcs12 utilities.
9753 Update documentation.
9756 *) Support for ASN1 "NULL" type. This could be handled before by using
9757 ASN1_TYPE but there wasn't any function that would try to read a NULL
9758 and produce an error if it couldn't. For compatibility we also have
9759 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
9760 don't allocate anything because they don't need to.
9763 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
9765 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
9767 *) Rebuild of the memory allocation routines used by OpenSSL code and
9768 possibly others as well. The purpose is to make an interface that
9769 provide hooks so anyone can build a separate set of allocation and
9770 deallocation routines to be used by OpenSSL, for example memory
9771 pool implementations, or something else, which was previously hard
9772 since Malloc(), Realloc() and Free() were defined as macros having
9773 the values malloc, realloc and free, respectively (except for Win32
9774 compilations). The same is provided for memory debugging code.
9775 OpenSSL already comes with functionality to find memory leaks, but
9776 this gives people a chance to debug other memory problems.
9778 With these changes, a new set of functions and macros have appeared:
9780 CRYPTO_set_mem_debug_functions() [F]
9781 CRYPTO_get_mem_debug_functions() [F]
9782 CRYPTO_dbg_set_options() [F]
9783 CRYPTO_dbg_get_options() [F]
9784 CRYPTO_malloc_debug_init() [M]
9786 The memory debug functions are NULL by default, unless the library
9787 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
9788 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
9789 gives the standard debugging functions that come with OpenSSL) or
9790 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
9791 provided by the library user) must be used. When the standard
9792 debugging functions are used, CRYPTO_dbg_set_options can be used to
9793 request additional information:
9794 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
9795 the CRYPTO_MDEBUG_xxx macro when compiling the library.
9797 Also, things like CRYPTO_set_mem_functions will always give the
9798 expected result (the new set of functions is used for allocation
9799 and deallocation) at all times, regardless of platform and compiler
9802 To finish it up, some functions that were never use in any other
9803 way than through macros have a new API and new semantic:
9806 CRYPTO_dbg_realloc()
9809 All macros of value have retained their old syntax.
9810 [Richard Levitte and Bodo Moeller]
9812 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
9813 ordering of SMIMECapabilities wasn't in "strength order" and there
9814 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
9818 *) Some ASN1 types with illegal zero length encoding (INTEGER,
9819 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
9820 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
9822 *) Merge in my S/MIME library for OpenSSL. This provides a simple
9823 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
9824 functionality to handle multipart/signed properly) and a utility
9825 called 'smime' to call all this stuff. This is based on code I
9826 originally wrote for Celo who have kindly allowed it to be
9827 included in OpenSSL.
9830 *) Add variants des_set_key_checked and des_set_key_unchecked of
9831 des_set_key (aka des_key_sched). Global variable des_check_key
9832 decides which of these is called by des_set_key; this way
9833 des_check_key behaves as it always did, but applications and
9834 the library itself, which was buggy for des_check_key == 1,
9835 have a cleaner way to pick the version they need.
9838 *) New function PKCS12_newpass() which changes the password of a
9842 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
9843 dynamic mix. In both cases the ids can be used as an index into the
9844 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
9845 functions so they accept a list of the field values and the
9846 application doesn't need to directly manipulate the X509_TRUST
9850 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
9854 *) Modify the way the V3 extension code looks up extensions. This now
9855 works in a similar way to the object code: we have some "standard"
9856 extensions in a static table which is searched with OBJ_bsearch()
9857 and the application can add dynamic ones if needed. The file
9858 crypto/x509v3/ext_dat.h now has the info: this file needs to be
9859 updated whenever a new extension is added to the core code and kept
9860 in ext_nid order. There is a simple program 'tabtest.c' which checks
9861 this. New extensions are not added too often so this file can readily
9862 be maintained manually.
9864 There are two big advantages in doing things this way. The extensions
9865 can be looked up immediately and no longer need to be "added" using
9866 X509V3_add_standard_extensions(): this function now does nothing.
9867 [Side note: I get *lots* of email saying the extension code doesn't
9868 work because people forget to call this function]
9869 Also no dynamic allocation is done unless new extensions are added:
9870 so if we don't add custom extensions there is no need to call
9871 X509V3_EXT_cleanup().
9874 *) Modify enc utility's salting as follows: make salting the default. Add a
9875 magic header, so unsalted files fail gracefully instead of just decrypting
9876 to garbage. This is because not salting is a big security hole, so people
9877 should be discouraged from doing it.
9880 *) Fixes and enhancements to the 'x509' utility. It allowed a message
9881 digest to be passed on the command line but it only used this
9882 parameter when signing a certificate. Modified so all relevant
9883 operations are affected by the digest parameter including the
9884 -fingerprint and -x509toreq options. Also -x509toreq choked if a
9885 DSA key was used because it didn't fix the digest.
9888 *) Initial certificate chain verify code. Currently tests the untrusted
9889 certificates for consistency with the verify purpose (which is set
9890 when the X509_STORE_CTX structure is set up) and checks the pathlength.
9892 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
9893 this is because it will reject chains with invalid extensions whereas
9894 every previous version of OpenSSL and SSLeay made no checks at all.
9896 Trust code: checks the root CA for the relevant trust settings. Trust
9897 settings have an initial value consistent with the verify purpose: e.g.
9898 if the verify purpose is for SSL client use it expects the CA to be
9899 trusted for SSL client use. However the default value can be changed to
9900 permit custom trust settings: one example of this would be to only trust
9901 certificates from a specific "secure" set of CAs.
9903 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
9904 which should be used for version portability: especially since the
9905 verify structure is likely to change more often now.
9907 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
9908 to set them. If not set then assume SSL clients will verify SSL servers
9911 Two new options to the verify program: -untrusted allows a set of
9912 untrusted certificates to be passed in and -purpose which sets the
9913 intended purpose of the certificate. If a purpose is set then the
9914 new chain verify code is used to check extension consistency.
9917 *) Support for the authority information access extension.
9920 *) Modify RSA and DSA PEM read routines to transparently handle
9921 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
9922 public keys in a format compatible with certificate
9923 SubjectPublicKeyInfo structures. Unfortunately there were already
9924 functions called *_PublicKey_* which used various odd formats so
9925 these are retained for compatibility: however the DSA variants were
9926 never in a public release so they have been deleted. Changed dsa/rsa
9927 utilities to handle the new format: note no releases ever handled public
9928 keys so we should be OK.
9930 The primary motivation for this change is to avoid the same fiasco
9931 that dogs private keys: there are several incompatible private key
9932 formats some of which are standard and some OpenSSL specific and
9933 require various evil hacks to allow partial transparent handling and
9934 even then it doesn't work with DER formats. Given the option anything
9935 other than PKCS#8 should be dumped: but the other formats have to
9936 stay in the name of compatibility.
9938 With public keys and the benefit of hindsight one standard format
9939 is used which works with EVP_PKEY, RSA or DSA structures: though
9940 it clearly returns an error if you try to read the wrong kind of key.
9942 Added a -pubkey option to the 'x509' utility to output the public key.
9943 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
9944 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
9945 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
9946 that do the same as the EVP_PKEY_assign_*() except they up the
9947 reference count of the added key (they don't "swallow" the
9951 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
9952 CRLs would fail if the file contained no certificates or no CRLs:
9953 added a new function to read in both types and return the number
9954 read: this means that if none are read it will be an error. The
9955 DER versions of the certificate and CRL reader would always fail
9956 because it isn't possible to mix certificates and CRLs in DER format
9957 without choking one or the other routine. Changed this to just read
9958 a certificate: this is the best we can do. Also modified the code
9959 in apps/verify.c to take notice of return codes: it was previously
9960 attempting to read in certificates from NULL pointers and ignoring
9961 any errors: this is one reason why the cert and CRL reader seemed
9962 to work. It doesn't check return codes from the default certificate
9963 routines: these may well fail if the certificates aren't installed.
9966 *) Code to support otherName option in GeneralName.
9969 *) First update to verify code. Change the verify utility
9970 so it warns if it is passed a self signed certificate:
9971 for consistency with the normal behaviour. X509_verify
9972 has been modified to it will now verify a self signed
9973 certificate if *exactly* the same certificate appears
9974 in the store: it was previously impossible to trust a
9975 single self signed certificate. This means that:
9976 openssl verify ss.pem
9977 now gives a warning about a self signed certificate but
9978 openssl verify -CAfile ss.pem ss.pem
9982 *) For servers, store verify_result in SSL_SESSION data structure
9983 (and add it to external session representation).
9984 This is needed when client certificate verifications fails,
9985 but an application-provided verification callback (set by
9986 SSL_CTX_set_cert_verify_callback) allows accepting the session
9987 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
9988 but returns 1): When the session is reused, we have to set
9989 ssl->verify_result to the appropriate error code to avoid
9991 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
9993 *) Fix a bug in the new PKCS#7 code: it didn't consider the
9994 case in PKCS7_dataInit() where the signed PKCS7 structure
9995 didn't contain any existing data because it was being created.
9996 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
9998 *) Add a salt to the key derivation routines in enc.c. This
9999 forms the first 8 bytes of the encrypted file. Also add a
10000 -S option to allow a salt to be input on the command line.
10003 *) New function X509_cmp(). Oddly enough there wasn't a function
10004 to compare two certificates. We do this by working out the SHA1
10005 hash and comparing that. X509_cmp() will be needed by the trust
10009 *) SSL_get1_session() is like SSL_get_session(), but increments
10010 the reference count in the SSL_SESSION returned.
10011 [Geoff Thorpe <geoff@eu.c2.net>]
10013 *) Fix for 'req': it was adding a null to request attributes.
10014 Also change the X509_LOOKUP and X509_INFO code to handle
10015 certificate auxiliary information.
10018 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
10022 *) Add the possibility to add extra information to the memory leak
10023 detecting output, to form tracebacks, showing from where each
10024 allocation was originated: CRYPTO_push_info("constant string") adds
10025 the string plus current file name and line number to a per-thread
10026 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
10027 is like calling CYRPTO_pop_info() until the stack is empty.
10028 Also updated memory leak detection code to be multi-thread-safe.
10031 *) Add options -text and -noout to pkcs7 utility and delete the
10032 encryption options which never did anything. Update docs.
10035 *) Add options to some of the utilities to allow the pass phrase
10036 to be included on either the command line (not recommended on
10037 OSes like Unix) or read from the environment. Update the
10038 manpages and fix a few bugs.
10041 *) Add a few manpages for some of the openssl commands.
10044 *) Fix the -revoke option in ca. It was freeing up memory twice,
10045 leaking and not finding already revoked certificates.
10048 *) Extensive changes to support certificate auxiliary information.
10049 This involves the use of X509_CERT_AUX structure and X509_AUX
10050 functions. An X509_AUX function such as PEM_read_X509_AUX()
10051 can still read in a certificate file in the usual way but it
10052 will also read in any additional "auxiliary information". By
10053 doing things this way a fair degree of compatibility can be
10054 retained: existing certificates can have this information added
10055 using the new 'x509' options.
10057 Current auxiliary information includes an "alias" and some trust
10058 settings. The trust settings will ultimately be used in enhanced
10059 certificate chain verification routines: currently a certificate
10060 can only be trusted if it is self signed and then it is trusted
10064 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
10065 The problem was that one of the replacement routines had not been working
10066 since SSLeay releases. For now the offending routine has been replaced
10067 with non-optimised assembler. Even so, this now gives around 95%
10068 performance improvement for 1024 bit RSA signs.
10071 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
10072 handling. Most clients have the effective key size in bits equal to
10073 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
10074 A few however don't do this and instead use the size of the decrypted key
10075 to determine the RC2 key length and the AlgorithmIdentifier to determine
10076 the effective key length. In this case the effective key length can still
10077 be 40 bits but the key length can be 168 bits for example. This is fixed
10078 by manually forcing an RC2 key into the EVP_PKEY structure because the
10079 EVP code can't currently handle unusual RC2 key sizes: it always assumes
10080 the key length and effective key length are equal.
10083 *) Add a bunch of functions that should simplify the creation of
10084 X509_NAME structures. Now you should be able to do:
10085 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
10086 and have it automatically work out the correct field type and fill in
10087 the structures. The more adventurous can try:
10088 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
10089 and it will (hopefully) work out the correct multibyte encoding.
10092 *) Change the 'req' utility to use the new field handling and multibyte
10093 copy routines. Before the DN field creation was handled in an ad hoc
10094 way in req, ca, and x509 which was rather broken and didn't support
10095 BMPStrings or UTF8Strings. Since some software doesn't implement
10096 BMPStrings or UTF8Strings yet, they can be enabled using the config file
10097 using the dirstring_type option. See the new comment in the default
10098 openssl.cnf for more info.
10101 *) Make crypto/rand/md_rand.c more robust:
10102 - Assure unique random numbers after fork().
10103 - Make sure that concurrent threads access the global counter and
10104 md serializably so that we never lose entropy in them
10105 or use exactly the same state in multiple threads.
10106 Access to the large state is not always serializable because
10107 the additional locking could be a performance killer, and
10108 md should be large enough anyway.
10111 *) New file apps/app_rand.c with commonly needed functionality
10112 for handling the random seed file.
10114 Use the random seed file in some applications that previously did not:
10116 dsaparam -genkey (which also ignored its '-rand' option),
10119 x509 (when signing).
10120 Except on systems with /dev/urandom, it is crucial to have a random
10121 seed file at least for key creation, DSA signing, and for DH exchanges;
10122 for RSA signatures we could do without one.
10124 gendh and gendsa (unlike genrsa) used to read only the first byte
10125 of each file listed in the '-rand' option. The function as previously
10126 found in genrsa is now in app_rand.c and is used by all programs
10127 that support '-rand'.
10130 *) In RAND_write_file, use mode 0600 for creating files;
10131 don't just chmod when it may be too late.
10134 *) Report an error from X509_STORE_load_locations
10135 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
10138 *) New function ASN1_mbstring_copy() this copies a string in either
10139 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
10140 into an ASN1_STRING type. A mask of permissible types is passed
10141 and it chooses the "minimal" type to use or an error if not type
10145 *) Add function equivalents to the various macros in asn1.h. The old
10146 macros are retained with an M_ prefix. Code inside the library can
10147 use the M_ macros. External code (including the openssl utility)
10148 should *NOT* in order to be "shared library friendly".
10151 *) Add various functions that can check a certificate's extensions
10152 to see if it usable for various purposes such as SSL client,
10153 server or S/MIME and CAs of these types. This is currently
10154 VERY EXPERIMENTAL but will ultimately be used for certificate chain
10155 verification. Also added a -purpose flag to x509 utility to
10156 print out all the purposes.
10159 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
10163 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
10164 for, obtain and decode and extension and obtain its critical flag.
10165 This allows all the necessary extension code to be handled in a
10166 single function call.
10169 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
10170 platforms. See crypto/rc4/rc4_enc.c for further details.
10173 *) New -noout option to asn1parse. This causes no output to be produced
10174 its main use is when combined with -strparse and -out to extract data
10175 from a file (which may not be in ASN.1 format).
10178 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
10179 when producing the local key id.
10180 [Richard Levitte <levitte@stacken.kth.se>]
10182 *) New option -dhparam in s_server. This allows a DH parameter file to be
10183 stated explicitly. If it is not stated then it tries the first server
10184 certificate file. The previous behaviour hard coded the filename
10188 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
10189 a public key to be input or output. For example:
10190 openssl rsa -in key.pem -pubout -out pubkey.pem
10191 Also added necessary DSA public key functions to handle this.
10194 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
10195 in the message. This was handled by allowing
10196 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
10197 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
10199 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
10200 to the end of the strings whereas this didn't. This would cause problems
10201 if strings read with d2i_ASN1_bytes() were later modified.
10202 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
10204 *) Fix for base64 decode bug. When a base64 bio reads only one line of
10205 data and it contains EOF it will end up returning an error. This is
10206 caused by input 46 bytes long. The cause is due to the way base64
10207 BIOs find the start of base64 encoded data. They do this by trying a
10208 trial decode on each line until they find one that works. When they
10209 do a flag is set and it starts again knowing it can pass all the
10210 data directly through the decoder. Unfortunately it doesn't reset
10211 the context it uses. This means that if EOF is reached an attempt
10212 is made to pass two EOFs through the context and this causes the
10213 resulting error. This can also cause other problems as well. As is
10214 usual with these problems it takes *ages* to find and the fix is
10215 trivial: move one line.
10216 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
10218 *) Ugly workaround to get s_client and s_server working under Windows. The
10219 old code wouldn't work because it needed to select() on sockets and the
10220 tty (for keypresses and to see if data could be written). Win32 only
10221 supports select() on sockets so we select() with a 1s timeout on the
10222 sockets and then see if any characters are waiting to be read, if none
10223 are present then we retry, we also assume we can always write data to
10224 the tty. This isn't nice because the code then blocks until we've
10225 received a complete line of data and it is effectively polling the
10226 keyboard at 1s intervals: however it's quite a bit better than not
10227 working at all :-) A dedicated Windows application might handle this
10228 with an event loop for example.
10231 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
10232 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
10233 will be called when RSA_sign() and RSA_verify() are used. This is useful
10234 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
10235 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
10236 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
10237 This necessitated the support of an extra signature type NID_md5_sha1
10238 for SSL signatures and modifications to the SSL library to use it instead
10239 of calling RSA_public_decrypt() and RSA_private_encrypt().
10242 *) Add new -verify -CAfile and -CApath options to the crl program, these
10243 will lookup a CRL issuers certificate and verify the signature in a
10244 similar way to the verify program. Tidy up the crl program so it
10245 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
10246 less strict. It will now permit CRL extensions even if it is not
10247 a V2 CRL: this will allow it to tolerate some broken CRLs.
10250 *) Initialize all non-automatic variables each time one of the openssl
10251 sub-programs is started (this is necessary as they may be started
10252 multiple times from the "OpenSSL>" prompt).
10253 [Lennart Bang, Bodo Moeller]
10255 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
10256 removing all other RSA functionality (this is what NO_RSA does). This
10257 is so (for example) those in the US can disable those operations covered
10258 by the RSA patent while allowing storage and parsing of RSA keys and RSA
10262 *) Non-copying interface to BIO pairs.
10263 (still largely untested)
10266 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
10267 ASCII string. This was handled independently in various places before.
10270 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
10271 UTF8 strings a character at a time.
10274 *) Use client_version from client hello to select the protocol
10275 (s23_srvr.c) and for RSA client key exchange verification
10276 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
10279 *) Add various utility functions to handle SPKACs, these were previously
10280 handled by poking round in the structure internals. Added new function
10281 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
10282 print, verify and generate SPKACs. Based on an original idea from
10283 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
10286 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
10289 *) Allow the config file extension section to be overwritten on the
10290 command line. Based on an original idea from Massimiliano Pala
10291 <madwolf@comune.modena.it>. The new option is called -extensions
10292 and can be applied to ca, req and x509. Also -reqexts to override
10293 the request extensions in req and -crlexts to override the crl extensions
10297 *) Add new feature to the SPKAC handling in ca. Now you can include
10298 the same field multiple times by preceding it by "XXXX." for example:
10301 this is the same syntax as used in the req config file.
10304 *) Allow certificate extensions to be added to certificate requests. These
10305 are specified in a 'req_extensions' option of the req section of the
10306 config file. They can be printed out with the -text option to req but
10307 are otherwise ignored at present.
10310 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
10311 data read consists of only the final block it would not decrypted because
10312 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
10313 A misplaced 'break' also meant the decrypted final block might not be
10314 copied until the next read.
10317 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
10318 a few extra parameters to the DH structure: these will be useful if
10319 for example we want the value of 'q' or implement X9.42 DH.
10322 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
10323 provides hooks that allow the default DSA functions or functions on a
10324 "per key" basis to be replaced. This allows hardware acceleration and
10325 hardware key storage to be handled without major modification to the
10326 library. Also added low level modexp hooks and CRYPTO_EX structure and
10327 associated functions.
10330 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
10331 as "read only": it can't be written to and the buffer it points to will
10332 not be freed. Reading from a read only BIO is much more efficient than
10333 a normal memory BIO. This was added because there are several times when
10334 an area of memory needs to be read from a BIO. The previous method was
10335 to create a memory BIO and write the data to it, this results in two
10336 copies of the data and an O(n^2) reading algorithm. There is a new
10337 function BIO_new_mem_buf() which creates a read only memory BIO from
10338 an area of memory. Also modified the PKCS#7 routines to use read only
10342 *) Bugfix: ssl23_get_client_hello did not work properly when called in
10343 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
10344 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
10345 but a retry condition occurred while trying to read the rest.
10348 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
10349 NID_pkcs7_encrypted by default: this was wrong since this should almost
10350 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
10351 the encrypted data type: this is a more sensible place to put it and it
10352 allows the PKCS#12 code to be tidied up that duplicated this
10356 *) Changed obj_dat.pl script so it takes its input and output files on
10357 the command line. This should avoid shell escape redirection problems
10361 *) Initial support for certificate extension requests, these are included
10362 in things like Xenroll certificate requests. Included functions to allow
10363 extensions to be obtained and added.
10366 *) -crlf option to s_client and s_server for sending newlines as
10367 CRLF (as required by many protocols).
10370 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
10372 *) Install libRSAglue.a when OpenSSL is built with RSAref.
10373 [Ralf S. Engelschall]
10375 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
10376 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
10378 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
10382 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
10383 DH parameters/keys (q is lost during that conversion, but the resulting
10384 DH parameters contain its length).
10386 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
10387 much faster than DH_generate_parameters (which creates parameters
10388 where p = 2*q + 1), and also the smaller q makes DH computations
10389 much more efficient (160-bit exponentiation instead of 1024-bit
10390 exponentiation); so this provides a convenient way to support DHE
10391 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
10392 utter importance to use
10393 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
10395 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
10396 when such DH parameters are used, because otherwise small subgroup
10397 attacks may become possible!
10400 *) Avoid memory leak in i2d_DHparams.
10403 *) Allow the -k option to be used more than once in the enc program:
10404 this allows the same encrypted message to be read by multiple recipients.
10407 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
10408 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
10409 it will always use the numerical form of the OID, even if it has a short
10413 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
10414 method only got called if p,q,dmp1,dmq1,iqmp components were present,
10415 otherwise bn_mod_exp was called. In the case of hardware keys for example
10416 no private key components need be present and it might store extra data
10417 in the RSA structure, which cannot be accessed from bn_mod_exp.
10418 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
10419 private key operations.
10422 *) Added support for SPARC Linux.
10425 *) pem_password_cb function type incompatibly changed from
10426 typedef int pem_password_cb(char *buf, int size, int rwflag);
10428 ....(char *buf, int size, int rwflag, void *userdata);
10429 so that applications can pass data to their callbacks:
10430 The PEM[_ASN1]_{read,write}... functions and macros now take an
10431 additional void * argument, which is just handed through whenever
10432 the password callback is called.
10433 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
10435 New function SSL_CTX_set_default_passwd_cb_userdata.
10437 Compatibility note: As many C implementations push function arguments
10438 onto the stack in reverse order, the new library version is likely to
10439 interoperate with programs that have been compiled with the old
10440 pem_password_cb definition (PEM_whatever takes some data that
10441 happens to be on the stack as its last argument, and the callback
10442 just ignores this garbage); but there is no guarantee whatsoever that
10445 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
10446 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
10447 problems not only on Windows, but also on some Unix platforms.
10448 To avoid problematic command lines, these definitions are now in an
10449 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
10450 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
10453 *) MIPS III/IV assembler module is reimplemented.
10456 *) More DES library cleanups: remove references to srand/rand and
10457 delete an unused file.
10460 *) Add support for the the free Netwide assembler (NASM) under Win32,
10461 since not many people have MASM (ml) and it can be hard to obtain.
10462 This is currently experimental but it seems to work OK and pass all
10463 the tests. Check out INSTALL.W32 for info.
10466 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
10467 without temporary keys kept an extra copy of the server key,
10468 and connections with temporary keys did not free everything in case
10472 *) New function RSA_check_key and new openssl rsa option -check
10473 for verifying the consistency of RSA keys.
10474 [Ulf Moeller, Bodo Moeller]
10476 *) Various changes to make Win32 compile work:
10477 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
10478 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
10479 comparison" warnings.
10480 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
10483 *) Add a debugging option to PKCS#5 v2 key generation function: when
10484 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
10485 derived keys are printed to stderr.
10488 *) Copy the flags in ASN1_STRING_dup().
10489 [Roman E. Pavlov <pre@mo.msk.ru>]
10491 *) The x509 application mishandled signing requests containing DSA
10492 keys when the signing key was also DSA and the parameters didn't match.
10494 It was supposed to omit the parameters when they matched the signing key:
10495 the verifying software was then supposed to automatically use the CA's
10496 parameters if they were absent from the end user certificate.
10498 Omitting parameters is no longer recommended. The test was also
10499 the wrong way round! This was probably due to unusual behaviour in
10500 EVP_cmp_parameters() which returns 1 if the parameters match.
10501 This meant that parameters were omitted when they *didn't* match and
10502 the certificate was useless. Certificates signed with 'ca' didn't have
10504 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
10506 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
10507 The interface is as follows:
10508 Applications can use
10509 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
10510 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
10511 "off" is now the default.
10512 The library internally uses
10513 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
10514 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
10515 to disable memory-checking temporarily.
10517 Some inconsistent states that previously were possible (and were
10518 even the default) are now avoided.
10520 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
10521 with each memory chunk allocated; this is occasionally more helpful
10522 than just having a counter.
10524 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
10526 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
10530 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
10531 which largely parallels "options", but is for changing API behaviour,
10532 whereas "options" are about protocol behaviour.
10533 Initial "mode" flags are:
10535 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
10536 a single record has been written.
10537 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
10538 retries use the same buffer location.
10539 (But all of the contents must be
10543 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
10546 *) Fix problems with no-hmac etc.
10547 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
10549 *) New functions RSA_get_default_method(), RSA_set_method() and
10550 RSA_get_method(). These allows replacement of RSA_METHODs without having
10551 to mess around with the internals of an RSA structure.
10554 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
10555 Also really enable memory leak checks in openssl.c and in some
10557 [Chad C. Mulligan, Bodo Moeller]
10559 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
10560 up the length of negative integers. This has now been simplified to just
10561 store the length when it is first determined and use it later, rather
10562 than trying to keep track of where data is copied and updating it to
10564 [Steve Henson, reported by Brien Wheeler
10565 <bwheeler@authentica-security.com>]
10567 *) Add a new function PKCS7_signatureVerify. This allows the verification
10568 of a PKCS#7 signature but with the signing certificate passed to the
10569 function itself. This contrasts with PKCS7_dataVerify which assumes the
10570 certificate is present in the PKCS#7 structure. This isn't always the
10571 case: certificates can be omitted from a PKCS#7 structure and be
10572 distributed by "out of band" means (such as a certificate database).
10575 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
10576 function prototypes in pem.h, also change util/mkdef.pl to add the
10577 necessary function names.
10580 *) mk1mf.pl (used by Windows builds) did not properly read the
10581 options set by Configure in the top level Makefile, and Configure
10582 was not even able to write more than one option correctly.
10583 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
10586 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
10587 file to be loaded from a BIO or FILE pointer. The BIO version will
10588 for example allow memory BIOs to contain config info.
10591 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
10592 Whoever hopes to achieve shared-library compatibility across versions
10593 must use this, not the compile-time macro.
10594 (Exercise 0.9.4: Which is the minimum library version required by
10596 Note: All this applies only to multi-threaded programs, others don't
10600 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
10601 through a BIO pair triggered the default case, i.e.
10602 SSLerr(...,SSL_R_UNKNOWN_STATE).
10605 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
10606 can use the SSL library even if none of the specific BIOs is
10610 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
10611 for the encoded length.
10612 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
10614 *) Add initial documentation of the X509V3 functions.
10617 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
10618 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
10619 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
10620 secure PKCS#8 private key format with a high iteration count.
10623 *) Fix determination of Perl interpreter: A perl or perl5
10624 _directory_ in $PATH was also accepted as the interpreter.
10625 [Ralf S. Engelschall]
10627 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
10628 wrong with it but it was very old and did things like calling
10629 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
10630 unusual formatting.
10633 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
10634 to use the new extension code.
10637 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
10638 with macros. This should make it easier to change their form, add extra
10639 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
10643 *) Add to configuration table a new entry that can specify an alternative
10644 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
10645 according to Mark Crispin <MRC@Panda.COM>.
10649 *) DES CBC did not update the IV. Weird.
10652 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
10653 Changing the behaviour of the former might break existing programs --
10654 where IV updating is needed, des_ncbc_encrypt can be used.
10657 *) When bntest is run from "make test" it drives bc to check its
10658 calculations, as well as internally checking them. If an internal check
10659 fails, it needs to cause bc to give a non-zero result or make test carries
10660 on without noticing the failure. Fixed.
10663 *) DES library cleanups.
10666 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
10667 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
10668 ciphers. NOTE: although the key derivation function has been verified
10669 against some published test vectors it has not been extensively tested
10670 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
10674 *) Instead of "mkdir -p", which is not fully portable, use new
10675 Perl script "util/mkdir-p.pl".
10678 *) Rewrite the way password based encryption (PBE) is handled. It used to
10679 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
10680 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
10681 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
10682 the 'parameter' field of the AlgorithmIdentifier is passed to the
10683 underlying key generation function so it must do its own ASN1 parsing.
10684 This has also changed the EVP_PBE_CipherInit() function which now has a
10685 'parameter' argument instead of literal salt and iteration count values
10686 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
10689 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
10690 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
10691 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
10692 KEY" because this clashed with PKCS#8 unencrypted string. Since this
10693 value was just used as a "magic string" and not used directly its
10694 value doesn't matter.
10697 *) Introduce some semblance of const correctness to BN. Shame C doesn't
10701 *) "linux-sparc64" configuration (ultrapenguin).
10702 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
10703 "linux-sparc" configuration.
10704 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
10706 *) config now generates no-xxx options for missing ciphers.
10709 *) Support the EBCDIC character set (work in progress).
10710 File ebcdic.c not yet included because it has a different license.
10711 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
10713 *) Support BS2000/OSD-POSIX.
10714 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
10716 *) Make callbacks for key generation use void * instead of char *.
10719 *) Make S/MIME samples compile (not yet tested).
10722 *) Additional typesafe stacks.
10725 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
10729 Changes between 0.9.3 and 0.9.3a [29 May 1999]
10731 *) New configuration variant "sco5-gcc".
10733 *) Updated some demos.
10734 [Sean O Riordain, Wade Scholine]
10736 *) Add missing BIO_free at exit of pkcs12 application.
10739 *) Fix memory leak in conf.c.
10742 *) Updates for Win32 to assembler version of MD5.
10745 *) Set #! path to perl in apps/der_chop to where we found it
10746 instead of using a fixed path.
10749 *) SHA library changes for irix64-mips4-cc.
10752 *) Improvements for VMS support.
10756 Changes between 0.9.2b and 0.9.3 [24 May 1999]
10758 *) Bignum library bug fix. IRIX 6 passes "make test" now!
10759 This also avoids the problems with SC4.2 and unpatched SC5.
10760 [Andy Polyakov <appro@fy.chalmers.se>]
10762 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
10763 These are required because of the typesafe stack would otherwise break
10764 existing code. If old code used a structure member which used to be STACK
10765 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
10766 sk_num or sk_value it would produce an error because the num, data members
10767 are not present in STACK_OF. Now it just produces a warning. sk_set
10768 replaces the old method of assigning a value to sk_value
10769 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
10770 that does this will no longer work (and should use sk_set instead) but
10771 this could be regarded as a "questionable" behaviour anyway.
10774 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
10775 correctly handle encrypted S/MIME data.
10778 *) Change type of various DES function arguments from des_cblock
10779 (which means, in function argument declarations, pointer to char)
10780 to des_cblock * (meaning pointer to array with 8 char elements),
10781 which allows the compiler to do more typechecking; it was like
10782 that back in SSLeay, but with lots of ugly casts.
10784 Introduce new type const_des_cblock.
10787 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
10788 problems: find RecipientInfo structure that matches recipient certificate
10789 and initialise the ASN1 structures properly based on passed cipher.
10792 *) Belatedly make the BN tests actually check the results.
10795 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
10796 to and from BNs: it was completely broken. New compilation option
10797 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
10798 key elements as negative integers.
10801 *) Reorganize and speed up MD5.
10802 [Andy Polyakov <appro@fy.chalmers.se>]
10805 [Richard Levitte <richard@levitte.org>]
10807 *) New option -out to asn1parse to allow the parsed structure to be
10808 output to a file. This is most useful when combined with the -strparse
10809 option to examine the output of things like OCTET STRINGS.
10812 *) Make SSL library a little more fool-proof by not requiring any longer
10813 that SSL_set_{accept,connect}_state be called before
10814 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
10815 in many applications because usually everything *appeared* to work as
10816 intended anyway -- now it really works as intended).
10819 *) Move openssl.cnf out of lib/.
10822 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
10823 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
10824 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
10825 [Ralf S. Engelschall]
10827 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
10828 handle PKCS#7 enveloped data properly.
10829 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
10831 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
10832 copying pointers. The cert_st handling is changed by this in
10833 various ways (and thus what used to be known as ctx->default_cert
10834 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
10835 any longer when s->cert does not give us what we need).
10836 ssl_cert_instantiate becomes obsolete by this change.
10837 As soon as we've got the new code right (possibly it already is?),
10838 we have solved a couple of bugs of the earlier code where s->cert
10839 was used as if it could not have been shared with other SSL structures.
10841 Note that using the SSL API in certain dirty ways now will result
10842 in different behaviour than observed with earlier library versions:
10843 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
10844 does not influence s as it used to.
10846 In order to clean up things more thoroughly, inside SSL_SESSION
10847 we don't use CERT any longer, but a new structure SESS_CERT
10848 that holds per-session data (if available); currently, this is
10849 the peer's certificate chain and, for clients, the server's certificate
10850 and temporary key. CERT holds only those values that can have
10851 meaningful defaults in an SSL_CTX.
10854 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
10855 from the internal representation. Various PKCS#7 fixes: remove some
10856 evil casts and set the enc_dig_alg field properly based on the signing
10860 *) Allow PKCS#12 password to be set from the command line or the
10861 environment. Let 'ca' get its config file name from the environment
10862 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
10866 *) Allow certificate policies extension to use an IA5STRING for the
10867 organization field. This is contrary to the PKIX definition but
10868 VeriSign uses it and IE5 only recognises this form. Document 'x509'
10872 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
10873 without disallowing inline assembler and the like for non-pedantic builds.
10876 *) Support Borland C++ builder.
10877 [Janez Jere <jj@void.si>, modified by Ulf Möller]
10879 *) Support Mingw32.
10882 *) SHA-1 cleanups and performance enhancements.
10883 [Andy Polyakov <appro@fy.chalmers.se>]
10885 *) Sparc v8plus assembler for the bignum library.
10886 [Andy Polyakov <appro@fy.chalmers.se>]
10888 *) Accept any -xxx and +xxx compiler options in Configure.
10891 *) Update HPUX configuration.
10894 *) Add missing sk_<type>_unshift() function to safestack.h
10895 [Ralf S. Engelschall]
10897 *) New function SSL_CTX_use_certificate_chain_file that sets the
10898 "extra_cert"s in addition to the certificate. (This makes sense
10899 only for "PEM" format files, as chains as a whole are not
10903 *) Support verify_depth from the SSL API.
10904 x509_vfy.c had what can be considered an off-by-one-error:
10905 Its depth (which was not part of the external interface)
10906 was actually counting the number of certificates in a chain;
10907 now it really counts the depth.
10910 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
10911 instead of X509err, which often resulted in confusing error
10912 messages since the error codes are not globally unique
10913 (e.g. an alleged error in ssl3_accept when a certificate
10914 didn't match the private key).
10916 *) New function SSL_CTX_set_session_id_context that allows to set a default
10917 value (so that you don't need SSL_set_session_id_context for each
10918 connection using the SSL_CTX).
10921 *) OAEP decoding bug fix.
10924 *) Support INSTALL_PREFIX for package builders, as proposed by
10928 *) New Configure options "threads" and "no-threads". For systems
10929 where the proper compiler options are known (currently Solaris
10930 and Linux), "threads" is the default.
10933 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
10936 *) Install various scripts to $(OPENSSLDIR)/misc, not to
10937 $(INSTALLTOP)/bin -- they shouldn't clutter directories
10938 such as /usr/local/bin.
10941 *) "make linux-shared" to build shared libraries.
10942 [Niels Poppe <niels@netbox.org>]
10944 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
10947 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
10948 extension adding in x509 utility.
10951 *) Remove NOPROTO sections and error code comments.
10954 *) Partial rewrite of the DEF file generator to now parse the ANSI
10958 *) New Configure options --prefix=DIR and --openssldir=DIR.
10961 *) Complete rewrite of the error code script(s). It is all now handled
10962 by one script at the top level which handles error code gathering,
10963 header rewriting and C source file generation. It should be much better
10964 than the old method: it now uses a modified version of Ulf's parser to
10965 read the ANSI prototypes in all header files (thus the old K&R definitions
10966 aren't needed for error creation any more) and do a better job of
10967 translating function codes into names. The old 'ASN1 error code imbedded
10968 in a comment' is no longer necessary and it doesn't use .err files which
10969 have now been deleted. Also the error code call doesn't have to appear all
10970 on one line (which resulted in some large lines...).
10973 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
10976 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
10977 0 (which usually indicates a closed connection), but continue reading.
10980 *) Fix some race conditions.
10983 *) Add support for CRL distribution points extension. Add Certificate
10984 Policies and CRL distribution points documentation.
10987 *) Move the autogenerated header file parts to crypto/opensslconf.h.
10990 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
10991 8 of keying material. Merlin has also confirmed interop with this fix
10992 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
10993 [Merlin Hughes <merlin@baltimore.ie>]
10995 *) Fix lots of warnings.
10996 [Richard Levitte <levitte@stacken.kth.se>]
10998 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
10999 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
11000 [Richard Levitte <levitte@stacken.kth.se>]
11002 *) Fix problems with sizeof(long) == 8.
11003 [Andy Polyakov <appro@fy.chalmers.se>]
11005 *) Change functions to ANSI C.
11008 *) Fix typos in error codes.
11009 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
11011 *) Remove defunct assembler files from Configure.
11014 *) SPARC v8 assembler BIGNUM implementation.
11015 [Andy Polyakov <appro@fy.chalmers.se>]
11017 *) Support for Certificate Policies extension: both print and set.
11018 Various additions to support the r2i method this uses.
11021 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
11022 return a const string when you are expecting an allocated buffer.
11025 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
11026 types DirectoryString and DisplayText.
11029 *) Add code to allow r2i extensions to access the configuration database,
11030 add an LHASH database driver and add several ctx helper functions.
11033 *) Fix an evil bug in bn_expand2() which caused various BN functions to
11034 fail when they extended the size of a BIGNUM.
11037 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
11038 support typesafe stack.
11041 *) Fix typo in SSL_[gs]et_options().
11042 [Nils Frostberg <nils@medcom.se>]
11044 *) Delete various functions and files that belonged to the (now obsolete)
11045 old X509V3 handling code.
11048 *) New Configure option "rsaref".
11051 *) Don't auto-generate pem.h.
11054 *) Introduce type-safe ASN.1 SETs.
11057 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
11058 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
11060 *) Introduce type-safe STACKs. This will almost certainly break lots of code
11061 that links with OpenSSL (well at least cause lots of warnings), but fear
11062 not: the conversion is trivial, and it eliminates loads of evil casts. A
11063 few STACKed things have been converted already. Feel free to convert more.
11064 In the fullness of time, I'll do away with the STACK type altogether.
11067 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
11068 specified in <certfile> by updating the entry in the index.txt file.
11069 This way one no longer has to edit the index.txt file manually for
11070 revoking a certificate. The -revoke option does the gory details now.
11071 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
11073 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
11074 `-text' option at all and this way the `-noout -text' combination was
11075 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
11076 [Ralf S. Engelschall]
11078 *) Make sure a corresponding plain text error message exists for the
11079 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
11080 verify callback function determined that a certificate was revoked.
11081 [Ralf S. Engelschall]
11083 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
11084 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
11085 all available cipers including rc5, which was forgotten until now.
11086 In order to let the testing shell script know which algorithms
11087 are available, a new (up to now undocumented) command
11088 "openssl list-cipher-commands" is used.
11091 *) Bugfix: s_client occasionally would sleep in select() when
11092 it should have checked SSL_pending() first.
11095 *) New functions DSA_do_sign and DSA_do_verify to provide access to
11096 the raw DSA values prior to ASN.1 encoding.
11099 *) Tweaks to Configure
11100 [Niels Poppe <niels@netbox.org>]
11102 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
11106 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
11109 *) New config option to avoid instructions that are illegal on the 80386.
11110 The default code is faster, but requires at least a 486.
11113 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
11114 SSL2_SERVER_VERSION (not used at all) macros, which are now the
11115 same as SSL2_VERSION anyway.
11118 *) New "-showcerts" option for s_client.
11121 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
11122 application. Various cleanups and fixes.
11125 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
11126 modify error routines to work internally. Add error codes and PBE init
11127 to library startup routines.
11130 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
11131 packing functions to asn1 and evp. Changed function names and error
11132 codes along the way.
11135 *) PKCS12 integration: and so it begins... First of several patches to
11136 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
11137 objects to objects.h
11140 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
11141 and display support for Thawte strong extranet extension.
11144 *) Add LinuxPPC support.
11145 [Jeff Dubrule <igor@pobox.org>]
11147 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
11148 bn_div_words in alpha.s.
11149 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
11151 *) Make sure the RSA OAEP test is skipped under -DRSAref because
11152 OAEP isn't supported when OpenSSL is built with RSAref.
11153 [Ulf Moeller <ulf@fitug.de>]
11155 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
11156 so they no longer are missing under -DNOPROTO.
11157 [Soren S. Jorvang <soren@t.dk>]
11160 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
11162 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
11163 doesn't work when the session is reused. Coming soon!
11166 *) Fix a security hole, that allows sessions to be reused in the wrong
11167 context thus bypassing client cert protection! All software that uses
11168 client certs and session caches in multiple contexts NEEDS PATCHING to
11169 allow session reuse! A fuller solution is in the works.
11170 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
11172 *) Some more source tree cleanups (removed obsolete files
11173 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
11174 permission on "config" script to be executable) and a fix for the INSTALL
11176 [Ulf Moeller <ulf@fitug.de>]
11178 *) Remove some legacy and erroneous uses of malloc, free instead of
11180 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
11182 *) Make rsa_oaep_test return non-zero on error.
11183 [Ulf Moeller <ulf@fitug.de>]
11185 *) Add support for native Solaris shared libraries. Configure
11186 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
11187 if someone would make that last step automatic.
11188 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
11190 *) ctx_size was not built with the right compiler during "make links". Fixed.
11193 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
11194 except NULL ciphers". This means the default cipher list will no longer
11195 enable NULL ciphers. They need to be specifically enabled e.g. with
11196 the string "DEFAULT:eNULL".
11199 *) Fix to RSA private encryption routines: if p < q then it would
11200 occasionally produce an invalid result. This will only happen with
11201 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
11204 *) Be less restrictive and allow also `perl util/perlpath.pl
11205 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
11206 because this way one can also use an interpreter named `perl5' (which is
11207 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
11208 installed as `perl').
11209 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
11211 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
11212 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
11214 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
11215 advapi32.lib to Win32 build and change the pem test comparison
11216 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
11217 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
11218 and crypto/des/ede_cbcm_enc.c.
11221 *) DES quad checksum was broken on big-endian architectures. Fixed.
11224 *) Comment out two functions in bio.h that aren't implemented. Fix up the
11225 Win32 test batch file so it (might) work again. The Win32 test batch file
11226 is horrible: I feel ill....
11229 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
11230 in e_os.h. Audit of header files to check ANSI and non ANSI
11231 sections: 10 functions were absent from non ANSI section and not exported
11232 from Windows DLLs. Fixed up libeay.num for new functions.
11235 *) Make `openssl version' output lines consistent.
11236 [Ralf S. Engelschall]
11238 *) Fix Win32 symbol export lists for BIO functions: Added
11239 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
11240 to ms/libeay{16,32}.def.
11241 [Ralf S. Engelschall]
11243 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
11244 fine under Unix and passes some trivial tests I've now added. But the
11245 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
11246 added to make sure no one expects that this stuff really works in the
11247 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
11248 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
11250 [Ralf S. Engelschall]
11252 *) Fix the generation of two part addresses in perl.
11253 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
11255 *) Add config entry for Linux on MIPS.
11256 [John Tobey <jtobey@channel1.com>]
11258 *) Make links whenever Configure is run, unless we are on Windoze.
11261 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
11262 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
11266 *) Add a useful kludge to allow package maintainers to specify compiler and
11267 other platforms details on the command line without having to patch the
11268 Configure script everytime: One now can use ``perl Configure
11269 <id>:<details>'', i.e. platform ids are allowed to have details appended
11270 to them (separated by colons). This is treated as there would be a static
11271 pre-configured entry in Configure's %table under key <id> with value
11272 <details> and ``perl Configure <id>'' is called. So, when you want to
11273 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
11274 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
11275 now, which overrides the FreeBSD-elf entry on-the-fly.
11276 [Ralf S. Engelschall]
11278 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
11281 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
11282 on the `perl Configure ...' command line. This way one can compile
11283 OpenSSL libraries with Position Independent Code (PIC) which is needed
11284 for linking it into DSOs.
11285 [Ralf S. Engelschall]
11287 *) Remarkably, export ciphers were totally broken and no-one had noticed!
11291 *) Cleaned up the LICENSE document: The official contact for any license
11292 questions now is the OpenSSL core team under openssl-core@openssl.org.
11293 And add a paragraph about the dual-license situation to make sure people
11294 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
11295 to the OpenSSL toolkit.
11296 [Ralf S. Engelschall]
11298 *) General source tree makefile cleanups: Made `making xxx in yyy...'
11299 display consistent in the source tree and replaced `/bin/rm' by `rm'.
11300 Additionally cleaned up the `make links' target: Remove unnecessary
11301 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
11302 to speed processing and no longer clutter the display with confusing
11303 stuff. Instead only the actually done links are displayed.
11304 [Ralf S. Engelschall]
11306 *) Permit null encryption ciphersuites, used for authentication only. It used
11307 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
11308 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
11312 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
11313 signed attributes when verifying signatures (this would break them),
11314 the detached data encoding was wrong and public keys obtained using
11315 X509_get_pubkey() weren't freed.
11318 *) Add text documentation for the BUFFER functions. Also added a work around
11319 to a Win95 console bug. This was triggered by the password read stuff: the
11320 last character typed gets carried over to the next fread(). If you were
11321 generating a new cert request using 'req' for example then the last
11322 character of the passphrase would be CR which would then enter the first
11326 *) Added the new `Includes OpenSSL Cryptography Software' button as
11327 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
11328 button and can be used by applications based on OpenSSL to show the
11329 relationship to the OpenSSL project.
11330 [Ralf S. Engelschall]
11332 *) Remove confusing variables in function signatures in files
11333 ssl/ssl_lib.c and ssl/ssl.h.
11334 [Lennart Bong <lob@kulthea.stacken.kth.se>]
11336 *) Don't install bss_file.c under PREFIX/include/
11337 [Lennart Bong <lob@kulthea.stacken.kth.se>]
11339 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
11340 functions that return function pointers and has support for NT specific
11341 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
11342 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
11343 unsigned to signed types: this was killing the Win32 compile.
11346 *) Add new certificate file to stack functions,
11347 SSL_add_dir_cert_subjects_to_stack() and
11348 SSL_add_file_cert_subjects_to_stack(). These largely supplant
11349 SSL_load_client_CA_file(), and can be used to add multiple certs easily
11350 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
11351 This means that Apache-SSL and similar packages don't have to mess around
11352 to add as many CAs as they want to the preferred list.
11355 *) Experiment with doxygen documentation. Currently only partially applied to
11357 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
11358 openssl.doxy as the configuration file.
11361 *) Get rid of remaining C++-style comments which strict C compilers hate.
11362 [Ralf S. Engelschall, pointed out by Carlos Amengual]
11364 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
11365 compiled in by default: it has problems with large keys.
11368 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
11369 DH private keys and/or callback functions which directly correspond to
11370 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
11371 is needed for applications which have to configure certificates on a
11372 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
11374 For the RSA certificate situation is makes no difference, but
11375 for the DSA certificate situation this fixes the "no shared cipher"
11376 problem where the OpenSSL cipher selection procedure failed because the
11377 temporary keys were not overtaken from the context and the API provided
11378 no way to reconfigure them.
11379 The new functions now let applications reconfigure the stuff and they
11380 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
11381 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
11382 non-public-API function ssl_cert_instantiate() is used as a helper
11383 function and also to reduce code redundancy inside ssl_rsa.c.
11384 [Ralf S. Engelschall]
11386 *) Move s_server -dcert and -dkey options out of the undocumented feature
11387 area because they are useful for the DSA situation and should be
11388 recognized by the users.
11389 [Ralf S. Engelschall]
11391 *) Fix the cipher decision scheme for export ciphers: the export bits are
11392 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
11393 SSL_EXP_MASK. So, the original variable has to be used instead of the
11394 already masked variable.
11395 [Richard Levitte <levitte@stacken.kth.se>]
11397 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
11398 [Richard Levitte <levitte@stacken.kth.se>]
11400 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
11401 from `int' to `unsigned int' because it's a length and initialized by
11402 EVP_DigestFinal() which expects an `unsigned int *'.
11403 [Richard Levitte <levitte@stacken.kth.se>]
11405 *) Don't hard-code path to Perl interpreter on shebang line of Configure
11406 script. Instead use the usual Shell->Perl transition trick.
11407 [Ralf S. Engelschall]
11409 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
11410 (in addition to RSA certificates) to match the behaviour of `openssl dsa
11411 -noout -modulus' as it's already the case for `openssl rsa -noout
11412 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
11413 currently the public key is printed (a decision which was already done by
11414 `openssl dsa -modulus' in the past) which serves a similar purpose.
11415 Additionally the NO_RSA no longer completely removes the whole -modulus
11416 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
11418 [Ralf S. Engelschall]
11420 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
11421 BIO. See the source (crypto/evp/bio_ok.c) for more info.
11422 [Arne Ansper <arne@ats.cyber.ee>]
11424 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
11425 to be added. Now both 'req' and 'ca' can use new objects defined in the
11429 *) Add cool BIO that does syslog (or event log on NT).
11430 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
11432 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
11433 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
11434 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
11435 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
11438 *) Add preliminary config info for new extension code.
11441 *) Make RSA_NO_PADDING really use no padding.
11442 [Ulf Moeller <ulf@fitug.de>]
11444 *) Generate errors when private/public key check is done.
11447 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
11448 for some CRL extensions and new objects added.
11451 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
11452 key usage extension and fuller support for authority key id.
11455 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
11456 padding method for RSA, which is recommended for new applications in PKCS
11457 #1 v2.0 (RFC 2437, October 1998).
11458 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
11459 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
11460 against Bleichbacher's attack on RSA.
11461 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
11464 *) Updates to the new SSL compression code
11465 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
11467 *) Fix so that the version number in the master secret, when passed
11468 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
11469 (because the server will not accept higher), that the version number
11470 is 0x03,0x01, not 0x03,0x00
11471 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
11473 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
11474 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
11475 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
11478 *) Support for RAW extensions where an arbitrary extension can be
11479 created by including its DER encoding. See apps/openssl.cnf for
11483 *) Make sure latest Perl versions don't interpret some generated C array
11484 code as Perl array code in the crypto/err/err_genc.pl script.
11485 [Lars Weber <3weber@informatik.uni-hamburg.de>]
11487 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
11488 not many people have the assembler. Various Win32 compilation fixes and
11489 update to the INSTALL.W32 file with (hopefully) more accurate Win32
11490 build instructions.
11493 *) Modify configure script 'Configure' to automatically create crypto/date.h
11494 file under Win32 and also build pem.h from pem.org. New script
11495 util/mkfiles.pl to create the MINFO file on environments that can't do a
11496 'make files': perl util/mkfiles.pl >MINFO should work.
11499 *) Major rework of DES function declarations, in the pursuit of correctness
11500 and purity. As a result, many evil casts evaporated, and some weirdness,
11501 too. You may find this causes warnings in your code. Zapping your evil
11502 casts will probably fix them. Mostly.
11505 *) Fix for a typo in asn1.h. Bug fix to object creation script
11506 obj_dat.pl. It considered a zero in an object definition to mean
11507 "end of object": none of the objects in objects.h have any zeros
11508 so it wasn't spotted.
11509 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
11511 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
11512 Masking (CBCM). In the absence of test vectors, the best I have been able
11513 to do is check that the decrypt undoes the encrypt, so far. Send me test
11514 vectors if you have them.
11517 *) Correct calculation of key length for export ciphers (too much space was
11518 allocated for null ciphers). This has not been tested!
11521 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
11522 message is now correct (it understands "crypto" and "ssl" on its
11523 command line). There is also now an "update" option. This will update
11524 the util/ssleay.num and util/libeay.num files with any new functions.
11526 perl util/mkdef.pl crypto ssl update
11527 it will update them.
11530 *) Overhauled the Perl interface (perl/*):
11531 - ported BN stuff to OpenSSL's different BN library
11532 - made the perl/ source tree CVS-aware
11533 - renamed the package from SSLeay to OpenSSL (the files still contain
11534 their history because I've copied them in the repository)
11535 - removed obsolete files (the test scripts will be replaced
11536 by better Test::Harness variants in the future)
11537 [Ralf S. Engelschall]
11539 *) First cut for a very conservative source tree cleanup:
11540 1. merge various obsolete readme texts into doc/ssleay.txt
11541 where we collect the old documents and readme texts.
11542 2. remove the first part of files where I'm already sure that we no
11543 longer need them because of three reasons: either they are just temporary
11544 files which were left by Eric or they are preserved original files where
11545 I've verified that the diff is also available in the CVS via "cvs diff
11546 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
11547 the crypto/md/ stuff).
11548 [Ralf S. Engelschall]
11550 *) More extension code. Incomplete support for subject and issuer alt
11551 name, issuer and authority key id. Change the i2v function parameters
11552 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
11553 what that's for :-) Fix to ASN1 macro which messed up
11554 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
11557 *) Preliminary support for ENUMERATED type. This is largely copied from the
11561 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
11562 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
11564 *) Make sure `make rehash' target really finds the `openssl' program.
11565 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
11567 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
11568 like to hear about it if this slows down other processors.
11571 *) Add CygWin32 platform information to Configure script.
11572 [Alan Batie <batie@aahz.jf.intel.com>]
11574 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
11575 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
11577 *) New program nseq to manipulate netscape certificate sequences
11580 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
11584 *) Fixes to BN code. Previously the default was to define BN_RECURSION
11585 but the BN code had some problems that would cause failures when
11586 doing certificate verification and some other functions.
11587 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
11589 *) Add ASN1 and PEM code to support netscape certificate sequences.
11592 *) Add ASN1 and PEM code to support netscape certificate sequences.
11595 *) Add several PKIX and private extended key usage OIDs.
11598 *) Modify the 'ca' program to handle the new extension code. Modify
11599 openssl.cnf for new extension format, add comments.
11602 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
11603 and add a sample to openssl.cnf so req -x509 now adds appropriate
11607 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
11608 error code, add initial support to X509_print() and x509 application.
11611 *) Takes a deep breath and start adding X509 V3 extension support code. Add
11612 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
11613 stuff is currently isolated and isn't even compiled yet.
11616 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
11617 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
11618 Removed the versions check from X509 routines when loading extensions:
11619 this allows certain broken certificates that don't set the version
11620 properly to be processed.
11623 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
11624 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
11625 can still be regenerated with "make depend".
11628 *) Spelling mistake in C version of CAST-128.
11629 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
11631 *) Changes to the error generation code. The perl script err-code.pl
11632 now reads in the old error codes and retains the old numbers, only
11633 adding new ones if necessary. It also only changes the .err files if new
11634 codes are added. The makefiles have been modified to only insert errors
11635 when needed (to avoid needlessly modifying header files). This is done
11636 by only inserting errors if the .err file is newer than the auto generated
11637 C file. To rebuild all the error codes from scratch (the old behaviour)
11638 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
11639 or delete all the .err files.
11642 *) CAST-128 was incorrectly implemented for short keys. The C version has
11643 been fixed, but is untested. The assembler versions are also fixed, but
11644 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
11645 to regenerate it if needed.
11646 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
11647 Hagino <itojun@kame.net>]
11649 *) File was opened incorrectly in randfile.c.
11650 [Ulf Möller <ulf@fitug.de>]
11652 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
11653 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
11654 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
11655 al: it's just almost always a UTCTime. Note this patch adds new error
11656 codes so do a "make errors" if there are problems.
11659 *) Correct Linux 1 recognition in config.
11660 [Ulf Möller <ulf@fitug.de>]
11662 *) Remove pointless MD5 hash when using DSA keys in ca.
11663 [Anonymous <nobody@replay.com>]
11665 *) Generate an error if given an empty string as a cert directory. Also
11666 generate an error if handed NULL (previously returned 0 to indicate an
11667 error, but didn't set one).
11668 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
11670 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
11673 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
11674 parameters. This was causing a warning which killed off the Win32 compile.
11677 *) Remove C++ style comments from crypto/bn/bn_local.h.
11678 [Neil Costigan <neil.costigan@celocom.com>]
11680 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
11681 based on a text string, looking up short and long names and finally
11682 "dot" format. The "dot" format stuff didn't work. Added new function
11683 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
11684 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
11685 OID is not part of the table.
11688 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
11689 X509_LOOKUP_by_alias().
11692 *) Sort openssl functions by name.
11695 *) Get the gendsa program working (hopefully) and add it to app list. Remove
11696 encryption from sample DSA keys (in case anyone is interested the password
11700 *) Make _all_ *_free functions accept a NULL pointer.
11701 [Frans Heymans <fheymans@isaserver.be>]
11703 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
11705 [Anonymous <nobody@replay.com>]
11707 *) s_server should send the CAfile as acceptable CAs, not its own cert.
11708 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
11710 *) Don't blow it for numeric -newkey arguments to apps/req.
11711 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
11713 *) Temp key "for export" tests were wrong in s3_srvr.c.
11714 [Anonymous <nobody@replay.com>]
11716 *) Add prototype for temp key callback functions
11717 SSL_CTX_set_tmp_{rsa,dh}_callback().
11720 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
11721 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
11724 *) X509_name_add_entry() freed the wrong thing after an error.
11725 [Arne Ansper <arne@ats.cyber.ee>]
11727 *) rsa_eay.c would attempt to free a NULL context.
11728 [Arne Ansper <arne@ats.cyber.ee>]
11730 *) BIO_s_socket() had a broken should_retry() on Windoze.
11731 [Arne Ansper <arne@ats.cyber.ee>]
11733 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
11734 [Arne Ansper <arne@ats.cyber.ee>]
11736 *) Make sure the already existing X509_STORE->depth variable is initialized
11737 in X509_STORE_new(), but document the fact that this variable is still
11738 unused in the certificate verification process.
11739 [Ralf S. Engelschall]
11741 *) Fix the various library and apps files to free up pkeys obtained from
11742 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
11745 *) Fix reference counting in X509_PUBKEY_get(). This makes
11746 demos/maurice/example2.c work, amongst others, probably.
11747 [Steve Henson and Ben Laurie]
11749 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
11750 `openssl' and second, the shortcut symlinks for the `openssl <command>'
11751 are no longer created. This way we have a single and consistent command
11752 line interface `openssl <command>', similar to `cvs <command>'.
11753 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
11755 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
11756 BIT STRING wrapper always have zero unused bits.
11759 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
11762 *) Make the top-level INSTALL documentation easier to understand.
11765 *) Makefiles updated to exit if an error occurs in a sub-directory
11766 make (including if user presses ^C) [Paul Sutton]
11768 *) Make Montgomery context stuff explicit in RSA data structure.
11771 *) Fix build order of pem and err to allow for generated pem.h.
11774 *) Fix renumbering bug in X509_NAME_delete_entry().
11777 *) Enhanced the err-ins.pl script so it makes the error library number
11778 global and can add a library name. This is needed for external ASN1 and
11779 other error libraries.
11782 *) Fixed sk_insert which never worked properly.
11785 *) Fix ASN1 macros so they can handle indefinite length constructed
11786 EXPLICIT tags. Some non standard certificates use these: they can now
11790 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
11791 into a single doc/ssleay.txt bundle. This way the information is still
11792 preserved but no longer messes up this directory. Now it's new room for
11793 the new set of documentation files.
11794 [Ralf S. Engelschall]
11796 *) SETs were incorrectly DER encoded. This was a major pain, because they
11797 shared code with SEQUENCEs, which aren't coded the same. This means that
11798 almost everything to do with SETs or SEQUENCEs has either changed name or
11799 number of arguments.
11800 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
11802 *) Fix test data to work with the above.
11805 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
11806 was already fixed by Eric for 0.9.1 it seems.
11807 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
11809 *) Autodetect FreeBSD3.
11812 *) Fix various bugs in Configure. This affects the following platforms:
11816 unixware-2.0-pentium
11820 *) Eliminate generated files from CVS. Reorder tests to regenerate files
11821 before they are needed.
11824 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
11828 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
11830 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
11831 changed SSLeay to OpenSSL in version strings.
11832 [Ralf S. Engelschall]
11834 *) Some fixups to the top-level documents.
11837 *) Fixed the nasty bug where rsaref.h was not found under compile-time
11838 because the symlink to include/ was missing.
11839 [Ralf S. Engelschall]
11841 *) Incorporated the popular no-RSA/DSA-only patches
11842 which allow to compile a RSA-free SSLeay.
11843 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
11845 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
11846 when "ssleay" is still not found.
11847 [Ralf S. Engelschall]
11849 *) Added more platforms to Configure: Cray T3E, HPUX 11,
11850 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
11852 *) Updated the README file.
11853 [Ralf S. Engelschall]
11855 *) Added various .cvsignore files in the CVS repository subdirs
11856 to make a "cvs update" really silent.
11857 [Ralf S. Engelschall]
11859 *) Recompiled the error-definition header files and added
11860 missing symbols to the Win32 linker tables.
11861 [Ralf S. Engelschall]
11863 *) Cleaned up the top-level documents;
11864 o new files: CHANGES and LICENSE
11865 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
11866 o merged COPYRIGHT into LICENSE
11867 o removed obsolete TODO file
11868 o renamed MICROSOFT to INSTALL.W32
11869 [Ralf S. Engelschall]
11871 *) Removed dummy files from the 0.9.1b source tree:
11872 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
11873 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
11874 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
11875 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
11876 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
11877 [Ralf S. Engelschall]
11879 *) Added various platform portability fixes.
11882 *) The Genesis of the OpenSSL rpject:
11883 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
11884 Young and Tim J. Hudson created while they were working for C2Net until
11886 [The OpenSSL Project]
11889 Changes between 0.9.0b and 0.9.1b [not released]
11891 *) Updated a few CA certificates under certs/
11894 *) Changed some BIGNUM api stuff.
11897 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
11898 DGUX x86, Linux Alpha, etc.
11901 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
11902 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
11906 *) Add -strparse option to asn1pars program which parses nested
11908 [Dr Stephen Henson <shenson@bigfoot.com>]
11910 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
11913 *) DSA fix for "ca" program.
11916 *) Added "-genkey" option to "dsaparam" program.
11919 *) Added RIPE MD160 (rmd160) message digest.
11922 *) Added -a (all) option to "ssleay version" command.
11925 *) Added PLATFORM define which is the id given to Configure.
11928 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
11931 *) Extended the ASN.1 parser routines.
11934 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
11937 *) Added a BN_CTX to the BN library.
11940 *) Fixed the weak key values in DES library
11943 *) Changed API in EVP library for cipher aliases.
11946 *) Added support for RC2/64bit cipher.
11949 *) Converted the lhash library to the crypto/mem.c functions.
11952 *) Added more recognized ASN.1 object ids.
11955 *) Added more RSA padding checks for SSL/TLS.
11958 *) Added BIO proxy/filter functionality.
11961 *) Added extra_certs to SSL_CTX which can be used
11962 send extra CA certificates to the client in the CA cert chain sending
11963 process. It can be configured with SSL_CTX_add_extra_chain_cert().
11966 *) Now Fortezza is denied in the authentication phase because
11967 this is key exchange mechanism is not supported by SSLeay at all.
11970 *) Additional PKCS1 checks.
11973 *) Support the string "TLSv1" for all TLS v1 ciphers.
11976 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
11977 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
11980 *) Fixed a few memory leaks.
11983 *) Fixed various code and comment typos.
11986 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
11987 bytes sent in the client random.
11988 [Edward Bishop <ebishop@spyglass.com>]