5 This is a high-level summary of the most important changes.
6 For a full list of changes, see the git commit log; for example,
7 https://github.com/openssl/openssl/commits/ and pick the appropriate
10 Changes between 1.1.0h and 1.1.0i [xx XXX xxxx]
12 *) Fixed a text canonicalisation bug in CMS
14 Where a CMS detached signature is used with text content the text goes
15 through a canonicalisation process first prior to signing or verifying a
16 signature. This process strips trailing space at the end of lines, converts
17 line terminators to CRLF and removes additional trailing line terminators
18 at the end of a file. A bug in the canonicalisation process meant that
19 some characters, such as form-feed, were incorrectly treated as whitespace
20 and removed. This is contrary to the specification (RFC5485). This fix
21 could mean that detached text data signed with an earlier version of
22 OpenSSL 1.1.0 may fail to verify using the fixed version, or text data
23 signed with a fixed OpenSSL may fail to verify with an earlier version of
24 OpenSSL 1.1.0. A workaround is to only verify the canonicalised text data
25 and use the "-binary" flag (for the "cms" command line application) or set
26 the SMIME_BINARY/PKCS7_BINARY/CMS_BINARY flags (if using CMS_verify()).
29 Changes between 1.1.0g and 1.1.0h [27 Mar 2018]
31 *) Constructed ASN.1 types with a recursive definition could exceed the stack
33 Constructed ASN.1 types with a recursive definition (such as can be found
34 in PKCS7) could eventually exceed the stack given malicious input with
35 excessive recursion. This could result in a Denial Of Service attack. There
36 are no such structures used within SSL/TLS that come from untrusted sources
37 so this is considered safe.
39 This issue was reported to OpenSSL on 4th January 2018 by the OSS-fuzz
44 *) Incorrect CRYPTO_memcmp on HP-UX PA-RISC
46 Because of an implementation bug the PA-RISC CRYPTO_memcmp function is
47 effectively reduced to only comparing the least significant bit of each
48 byte. This allows an attacker to forge messages that would be considered as
49 authenticated in an amount of tries lower than that guaranteed by the
50 security claims of the scheme. The module can only be compiled by the
51 HP-UX assembler, so that only HP-UX PA-RISC targets are affected.
53 This issue was reported to OpenSSL on 2nd March 2018 by Peter Waltenberg
58 *) Add a build target 'build_all_generated', to build all generated files
59 and only that. This can be used to prepare everything that requires
60 things like perl for a system that lacks perl and then move everything
61 to that system and do the rest of the build there.
64 *) Backport SSL_OP_NO_RENGOTIATION
66 OpenSSL 1.0.2 and below had the ability to disable renegotiation using the
67 (undocumented) SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS flag. Due to the opacity
68 changes this is no longer possible in 1.1.0. Therefore the new
69 SSL_OP_NO_RENEGOTIATION option from 1.1.1-dev has been backported to
70 1.1.0 to provide equivalent functionality.
72 Note that if an application built against 1.1.0h headers (or above) is run
73 using an older version of 1.1.0 (prior to 1.1.0h) then the option will be
74 accepted but nothing will happen, i.e. renegotiation will not be prevented.
77 *) Removed the OS390-Unix config target. It relied on a script that doesn't
81 *) rsaz_1024_mul_avx2 overflow bug on x86_64
83 There is an overflow bug in the AVX2 Montgomery multiplication procedure
84 used in exponentiation with 1024-bit moduli. No EC algorithms are affected.
85 Analysis suggests that attacks against RSA and DSA as a result of this
86 defect would be very difficult to perform and are not believed likely.
87 Attacks against DH1024 are considered just feasible, because most of the
88 work necessary to deduce information about a private key may be performed
89 offline. The amount of resources required for such an attack would be
90 significant. However, for an attack on TLS to be meaningful, the server
91 would have to share the DH1024 private key among multiple clients, which is
92 no longer an option since CVE-2016-0701.
94 This only affects processors that support the AVX2 but not ADX extensions
95 like Intel Haswell (4th generation).
97 This issue was reported to OpenSSL by David Benjamin (Google). The issue
98 was originally found via the OSS-Fuzz project.
102 Changes between 1.1.0f and 1.1.0g [2 Nov 2017]
104 *) bn_sqrx8x_internal carry bug on x86_64
106 There is a carry propagating bug in the x86_64 Montgomery squaring
107 procedure. No EC algorithms are affected. Analysis suggests that attacks
108 against RSA and DSA as a result of this defect would be very difficult to
109 perform and are not believed likely. Attacks against DH are considered just
110 feasible (although very difficult) because most of the work necessary to
111 deduce information about a private key may be performed offline. The amount
112 of resources required for such an attack would be very significant and
113 likely only accessible to a limited number of attackers. An attacker would
114 additionally need online access to an unpatched system using the target
115 private key in a scenario with persistent DH parameters and a private
116 key that is shared between multiple clients.
118 This only affects processors that support the BMI1, BMI2 and ADX extensions
119 like Intel Broadwell (5th generation) and later or AMD Ryzen.
121 This issue was reported to OpenSSL by the OSS-Fuzz project.
125 *) Malformed X.509 IPAddressFamily could cause OOB read
127 If an X.509 certificate has a malformed IPAddressFamily extension,
128 OpenSSL could do a one-byte buffer overread. The most likely result
129 would be an erroneous display of the certificate in text format.
131 This issue was reported to OpenSSL by the OSS-Fuzz project.
135 *) Ignore the '-named_curve auto' value for compatibility of applications
137 [Tomas Mraz <tmraz@fedoraproject.org>]
139 *) Support for SSL_OP_NO_ENCRYPT_THEN_MAC in SSL_CONF_cmd.
142 Changes between 1.1.0e and 1.1.0f [25 May 2017]
144 *) Have 'config' recognise 64-bit mingw and choose 'mingw64' as the target
145 platform rather than 'mingw'.
148 *) Remove the VMS-specific reimplementation of gmtime from crypto/o_times.c.
149 VMS C's RTL has a fully up to date gmtime() and gmtime_r() since V7.1,
150 which is the minimum version we support.
153 Changes between 1.1.0d and 1.1.0e [16 Feb 2017]
155 *) Encrypt-Then-Mac renegotiation crash
157 During a renegotiation handshake if the Encrypt-Then-Mac extension is
158 negotiated where it was not in the original handshake (or vice-versa) then
159 this can cause OpenSSL to crash (dependant on ciphersuite). Both clients
160 and servers are affected.
162 This issue was reported to OpenSSL by Joe Orton (Red Hat).
166 Changes between 1.1.0c and 1.1.0d [26 Jan 2017]
168 *) Truncated packet could crash via OOB read
170 If one side of an SSL/TLS path is running on a 32-bit host and a specific
171 cipher is being used, then a truncated packet can cause that host to
172 perform an out-of-bounds read, usually resulting in a crash.
174 This issue was reported to OpenSSL by Robert Święcki of Google.
178 *) Bad (EC)DHE parameters cause a client crash
180 If a malicious server supplies bad parameters for a DHE or ECDHE key
181 exchange then this can result in the client attempting to dereference a
182 NULL pointer leading to a client crash. This could be exploited in a Denial
185 This issue was reported to OpenSSL by Guido Vranken.
189 *) BN_mod_exp may produce incorrect results on x86_64
191 There is a carry propagating bug in the x86_64 Montgomery squaring
192 procedure. No EC algorithms are affected. Analysis suggests that attacks
193 against RSA and DSA as a result of this defect would be very difficult to
194 perform and are not believed likely. Attacks against DH are considered just
195 feasible (although very difficult) because most of the work necessary to
196 deduce information about a private key may be performed offline. The amount
197 of resources required for such an attack would be very significant and
198 likely only accessible to a limited number of attackers. An attacker would
199 additionally need online access to an unpatched system using the target
200 private key in a scenario with persistent DH parameters and a private
201 key that is shared between multiple clients. For example this can occur by
202 default in OpenSSL DHE based SSL/TLS ciphersuites. Note: This issue is very
203 similar to CVE-2015-3193 but must be treated as a separate problem.
205 This issue was reported to OpenSSL by the OSS-Fuzz project.
209 Changes between 1.1.0b and 1.1.0c [10 Nov 2016]
211 *) ChaCha20/Poly1305 heap-buffer-overflow
213 TLS connections using *-CHACHA20-POLY1305 ciphersuites are susceptible to
214 a DoS attack by corrupting larger payloads. This can result in an OpenSSL
215 crash. This issue is not considered to be exploitable beyond a DoS.
217 This issue was reported to OpenSSL by Robert Święcki (Google Security Team)
221 *) CMS Null dereference
223 Applications parsing invalid CMS structures can crash with a NULL pointer
224 dereference. This is caused by a bug in the handling of the ASN.1 CHOICE
225 type in OpenSSL 1.1.0 which can result in a NULL value being passed to the
226 structure callback if an attempt is made to free certain invalid encodings.
227 Only CHOICE structures using a callback which do not handle NULL value are
230 This issue was reported to OpenSSL by Tyler Nighswander of ForAllSecure.
234 *) Montgomery multiplication may produce incorrect results
236 There is a carry propagating bug in the Broadwell-specific Montgomery
237 multiplication procedure that handles input lengths divisible by, but
238 longer than 256 bits. Analysis suggests that attacks against RSA, DSA
239 and DH private keys are impossible. This is because the subroutine in
240 question is not used in operations with the private key itself and an input
241 of the attacker's direct choice. Otherwise the bug can manifest itself as
242 transient authentication and key negotiation failures or reproducible
243 erroneous outcome of public-key operations with specially crafted input.
244 Among EC algorithms only Brainpool P-512 curves are affected and one
245 presumably can attack ECDH key negotiation. Impact was not analyzed in
246 detail, because pre-requisites for attack are considered unlikely. Namely
247 multiple clients have to choose the curve in question and the server has to
248 share the private key among them, neither of which is default behaviour.
249 Even then only clients that chose the curve will be affected.
251 This issue was publicly reported as transient failures and was not
252 initially recognized as a security issue. Thanks to Richard Morgan for
253 providing reproducible case.
257 *) OpenSSL now fails if it receives an unrecognised record type in TLS1.0
258 or TLS1.1. Previously this only happened in SSLv3 and TLS1.2. This is to
259 prevent issues where no progress is being made and the peer continually
260 sends unrecognised record types, using up resources processing them.
263 *) Removed automatic addition of RPATH in shared libraries and executables,
264 as this was a remainder from OpenSSL 1.0.x and isn't needed any more.
267 Changes between 1.1.0a and 1.1.0b [26 Sep 2016]
269 *) Fix Use After Free for large message sizes
271 The patch applied to address CVE-2016-6307 resulted in an issue where if a
272 message larger than approx 16k is received then the underlying buffer to
273 store the incoming message is reallocated and moved. Unfortunately a
274 dangling pointer to the old location is left which results in an attempt to
275 write to the previously freed location. This is likely to result in a
276 crash, however it could potentially lead to execution of arbitrary code.
278 This issue only affects OpenSSL 1.1.0a.
280 This issue was reported to OpenSSL by Robert Święcki.
284 Changes between 1.1.0 and 1.1.0a [22 Sep 2016]
286 *) OCSP Status Request extension unbounded memory growth
288 A malicious client can send an excessively large OCSP Status Request
289 extension. If that client continually requests renegotiation, sending a
290 large OCSP Status Request extension each time, then there will be unbounded
291 memory growth on the server. This will eventually lead to a Denial Of
292 Service attack through memory exhaustion. Servers with a default
293 configuration are vulnerable even if they do not support OCSP. Builds using
294 the "no-ocsp" build time option are not affected.
296 This issue was reported to OpenSSL by Shi Lei (Gear Team, Qihoo 360 Inc.)
300 *) SSL_peek() hang on empty record
302 OpenSSL 1.1.0 SSL/TLS will hang during a call to SSL_peek() if the peer
303 sends an empty record. This could be exploited by a malicious peer in a
304 Denial Of Service attack.
306 This issue was reported to OpenSSL by Alex Gaynor.
310 *) Excessive allocation of memory in tls_get_message_header() and
311 dtls1_preprocess_fragment()
313 A (D)TLS message includes 3 bytes for its length in the header for the
314 message. This would allow for messages up to 16Mb in length. Messages of
315 this length are excessive and OpenSSL includes a check to ensure that a
316 peer is sending reasonably sized messages in order to avoid too much memory
317 being consumed to service a connection. A flaw in the logic of version
318 1.1.0 means that memory for the message is allocated too early, prior to
319 the excessive message length check. Due to way memory is allocated in
320 OpenSSL this could mean an attacker could force up to 21Mb to be allocated
321 to service a connection. This could lead to a Denial of Service through
322 memory exhaustion. However, the excessive message length check still takes
323 place, and this would cause the connection to immediately fail. Assuming
324 that the application calls SSL_free() on the failed connection in a timely
325 manner then the 21Mb of allocated memory will then be immediately freed
326 again. Therefore the excessive memory allocation will be transitory in
327 nature. This then means that there is only a security impact if:
329 1) The application does not call SSL_free() in a timely manner in the event
330 that the connection fails
332 2) The application is working in a constrained environment where there is
333 very little free memory
335 3) The attacker initiates multiple connection attempts such that there are
336 multiple connections in a state where memory has been allocated for the
337 connection; SSL_free() has not yet been called; and there is insufficient
338 memory to service the multiple requests.
340 Except in the instance of (1) above any Denial Of Service is likely to be
341 transitory because as soon as the connection fails the memory is
342 subsequently freed again in the SSL_free() call. However there is an
343 increased risk during this period of application crashes due to the lack of
344 memory - which would then mean a more serious Denial of Service.
346 This issue was reported to OpenSSL by Shi Lei (Gear Team, Qihoo 360 Inc.)
347 (CVE-2016-6307 and CVE-2016-6308)
350 *) solaris-x86-cc, i.e. 32-bit configuration with vendor compiler,
351 had to be removed. Primary reason is that vendor assembler can't
352 assemble our modules with -KPIC flag. As result it, assembly
353 support, was not even available as option. But its lack means
354 lack of side-channel resistant code, which is incompatible with
355 security by todays standards. Fortunately gcc is readily available
356 prepackaged option, which we firmly point at...
359 Changes between 1.0.2h and 1.1.0 [25 Aug 2016]
361 *) Windows command-line tool supports UTF-8 opt-in option for arguments
362 and console input. Setting OPENSSL_WIN32_UTF8 environment variable
363 (to any value) allows Windows user to access PKCS#12 file generated
364 with Windows CryptoAPI and protected with non-ASCII password, as well
365 as files generated under UTF-8 locale on Linux also protected with
369 *) To mitigate the SWEET32 attack (CVE-2016-2183), 3DES cipher suites
370 have been disabled by default and removed from DEFAULT, just like RC4.
371 See the RC4 item below to re-enable both.
374 *) The method for finding the storage location for the Windows RAND seed file
375 has changed. First we check %RANDFILE%. If that is not set then we check
376 the directories %HOME%, %USERPROFILE% and %SYSTEMROOT% in that order. If
377 all else fails we fall back to C:\.
380 *) The EVP_EncryptUpdate() function has had its return type changed from void
381 to int. A return of 0 indicates and error while a return of 1 indicates
385 *) The flags RSA_FLAG_NO_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME and
386 DH_FLAG_NO_EXP_CONSTTIME which previously provided the ability to switch
387 off the constant time implementation for RSA, DSA and DH have been made
388 no-ops and deprecated.
391 *) Windows RAND implementation was simplified to only get entropy by
392 calling CryptGenRandom(). Various other RAND-related tickets
394 [Joseph Wylie Yandle, Rich Salz]
396 *) The stack and lhash API's were renamed to start with OPENSSL_SK_
397 and OPENSSL_LH_, respectively. The old names are available
398 with API compatibility. They new names are now completely documented.
401 *) Unify TYPE_up_ref(obj) methods signature.
402 SSL_CTX_up_ref(), SSL_up_ref(), X509_up_ref(), EVP_PKEY_up_ref(),
403 X509_CRL_up_ref(), X509_OBJECT_up_ref_count() methods are now returning an
404 int (instead of void) like all others TYPE_up_ref() methods.
405 So now these methods also check the return value of CRYPTO_atomic_add(),
406 and the validity of object reference counter.
407 [fdasilvayy@gmail.com]
409 *) With Windows Visual Studio builds, the .pdb files are installed
410 alongside the installed libraries and executables. For a static
411 library installation, ossl_static.pdb is the associate compiler
412 generated .pdb file to be used when linking programs.
415 *) Remove openssl.spec. Packaging files belong with the packagers.
418 *) Automatic Darwin/OSX configuration has had a refresh, it will now
419 recognise x86_64 architectures automatically. You can still decide
420 to build for a different bitness with the environment variable
421 KERNEL_BITS (can be 32 or 64), for example:
423 KERNEL_BITS=32 ./config
427 *) Change default algorithms in pkcs8 utility to use PKCS#5 v2.0,
428 256 bit AES and HMAC with SHA256.
431 *) Remove support for MIPS o32 ABI on IRIX (and IRIX only).
434 *) Triple-DES ciphers have been moved from HIGH to MEDIUM.
437 *) To enable users to have their own config files and build file templates,
438 Configure looks in the directory indicated by the environment variable
439 OPENSSL_LOCAL_CONFIG_DIR as well as the in-source Configurations/
440 directory. On VMS, OPENSSL_LOCAL_CONFIG_DIR is expected to be a logical
441 name and is used as is.
444 *) The following datatypes were made opaque: X509_OBJECT, X509_STORE_CTX,
445 X509_STORE, X509_LOOKUP, and X509_LOOKUP_METHOD. The unused type
446 X509_CERT_FILE_CTX was removed.
449 *) "shared" builds are now the default. To create only static libraries use
450 the "no-shared" Configure option.
453 *) Remove the no-aes, no-hmac, no-rsa, no-sha and no-md5 Configure options.
454 All of these option have not worked for some while and are fundamental
458 *) Make various cleanup routines no-ops and mark them as deprecated. Most
459 global cleanup functions are no longer required because they are handled
460 via auto-deinit (see OPENSSL_init_crypto and OPENSSL_init_ssl man pages).
461 Explicitly de-initing can cause problems (e.g. where a library that uses
462 OpenSSL de-inits, but an application is still using it). The affected
463 functions are CONF_modules_free(), ENGINE_cleanup(), OBJ_cleanup(),
464 EVP_cleanup(), BIO_sock_cleanup(), CRYPTO_cleanup_all_ex_data(),
465 RAND_cleanup(), SSL_COMP_free_compression_methods(), ERR_free_strings() and
469 *) --strict-warnings no longer enables runtime debugging options
470 such as REF_DEBUG. Instead, debug options are automatically
471 enabled with '--debug' builds.
472 [Andy Polyakov, Emilia Käsper]
474 *) Made DH and DH_METHOD opaque. The structures for managing DH objects
475 have been moved out of the public header files. New functions for managing
476 these have been added.
479 *) Made RSA and RSA_METHOD opaque. The structures for managing RSA
480 objects have been moved out of the public header files. New
481 functions for managing these have been added.
484 *) Made DSA and DSA_METHOD opaque. The structures for managing DSA objects
485 have been moved out of the public header files. New functions for managing
486 these have been added.
489 *) Made BIO and BIO_METHOD opaque. The structures for managing BIOs have been
490 moved out of the public header files. New functions for managing these
494 *) Removed no-rijndael as a config option. Rijndael is an old name for AES.
497 *) Removed the mk1mf build scripts.
500 *) Headers are now wrapped, if necessary, with OPENSSL_NO_xxx, so
501 it is always safe to #include a header now.
504 *) Removed the aged BC-32 config and all its supporting scripts
507 *) Removed support for Ultrix, Netware, and OS/2.
510 *) Add support for HKDF.
513 *) Add support for blake2b and blake2s
516 *) Added support for "pipelining". Ciphers that have the
517 EVP_CIPH_FLAG_PIPELINE flag set have a capability to process multiple
518 encryptions/decryptions simultaneously. There are currently no built-in
519 ciphers with this property but the expectation is that engines will be able
520 to offer it to significantly improve throughput. Support has been extended
521 into libssl so that multiple records for a single connection can be
522 processed in one go (for >=TLS 1.1).
525 *) Added the AFALG engine. This is an async capable engine which is able to
526 offload work to the Linux kernel. In this initial version it only supports
527 AES128-CBC. The kernel must be version 4.1.0 or greater.
530 *) OpenSSL now uses a new threading API. It is no longer necessary to
531 set locking callbacks to use OpenSSL in a multi-threaded environment. There
532 are two supported threading models: pthreads and windows threads. It is
533 also possible to configure OpenSSL at compile time for "no-threads". The
534 old threading API should no longer be used. The functions have been
535 replaced with "no-op" compatibility macros.
536 [Alessandro Ghedini, Matt Caswell]
538 *) Modify behavior of ALPN to invoke callback after SNI/servername
539 callback, such that updates to the SSL_CTX affect ALPN.
542 *) Add SSL_CIPHER queries for authentication and key-exchange.
545 *) Changes to the DEFAULT cipherlist:
546 - Prefer (EC)DHE handshakes over plain RSA.
547 - Prefer AEAD ciphers over legacy ciphers.
548 - Prefer ECDSA over RSA when both certificates are available.
549 - Prefer TLSv1.2 ciphers/PRF.
550 - Remove DSS, SEED, IDEA, CAMELLIA, and AES-CCM from the
554 *) Change the ECC default curve list to be this, in order: x25519,
555 secp256r1, secp521r1, secp384r1.
558 *) RC4 based libssl ciphersuites are now classed as "weak" ciphers and are
559 disabled by default. They can be re-enabled using the
560 enable-weak-ssl-ciphers option to Configure.
563 *) If the server has ALPN configured, but supports no protocols that the
564 client advertises, send a fatal "no_application_protocol" alert.
565 This behaviour is SHALL in RFC 7301, though it isn't universally
566 implemented by other servers.
569 *) Add X25519 support.
570 Add ASN.1 and EVP_PKEY methods for X25519. This includes support
571 for public and private key encoding using the format documented in
572 draft-ietf-curdle-pkix-02. The corresponding EVP_PKEY method supports
573 key generation and key derivation.
575 TLS support complies with draft-ietf-tls-rfc4492bis-08 and uses
579 *) Deprecate SRP_VBASE_get_by_user.
580 SRP_VBASE_get_by_user had inconsistent memory management behaviour.
581 In order to fix an unavoidable memory leak (CVE-2016-0798),
582 SRP_VBASE_get_by_user was changed to ignore the "fake user" SRP
583 seed, even if the seed is configured.
585 Users should use SRP_VBASE_get1_by_user instead. Note that in
586 SRP_VBASE_get1_by_user, caller must free the returned value. Note
587 also that even though configuring the SRP seed attempts to hide
588 invalid usernames by continuing the handshake with fake
589 credentials, this behaviour is not constant time and no strong
590 guarantees are made that the handshake is indistinguishable from
591 that of a valid user.
594 *) Configuration change; it's now possible to build dynamic engines
595 without having to build shared libraries and vice versa. This
596 only applies to the engines in engines/, those in crypto/engine/
597 will always be built into libcrypto (i.e. "static").
599 Building dynamic engines is enabled by default; to disable, use
600 the configuration option "disable-dynamic-engine".
602 The only requirements for building dynamic engines are the
603 presence of the DSO module and building with position independent
604 code, so they will also automatically be disabled if configuring
605 with "disable-dso" or "disable-pic".
607 The macros OPENSSL_NO_STATIC_ENGINE and OPENSSL_NO_DYNAMIC_ENGINE
608 are also taken away from openssl/opensslconf.h, as they are
612 *) Configuration change; if there is a known flag to compile
613 position independent code, it will always be applied on the
614 libcrypto and libssl object files, and never on the application
615 object files. This means other libraries that use routines from
616 libcrypto / libssl can be made into shared libraries regardless
617 of how OpenSSL was configured.
619 If this isn't desirable, the configuration options "disable-pic"
620 or "no-pic" can be used to disable the use of PIC. This will
621 also disable building shared libraries and dynamic engines.
624 *) Removed JPAKE code. It was experimental and has no wide use.
627 *) The INSTALL_PREFIX Makefile variable has been renamed to
628 DESTDIR. That makes for less confusion on what this variable
629 is for. Also, the configuration option --install_prefix is
633 *) Heartbeat for TLS has been removed and is disabled by default
634 for DTLS; configure with enable-heartbeats. Code that uses the
635 old #define's might need to be updated.
636 [Emilia Käsper, Rich Salz]
638 *) Rename REF_CHECK to REF_DEBUG.
641 *) New "unified" build system
643 The "unified" build system is aimed to be a common system for all
644 platforms we support. With it comes new support for VMS.
646 This system builds supports building in a different directory tree
647 than the source tree. It produces one Makefile (for unix family
648 or lookalikes), or one descrip.mms (for VMS).
650 The source of information to make the Makefile / descrip.mms is
651 small files called 'build.info', holding the necessary
652 information for each directory with source to compile, and a
653 template in Configurations, like unix-Makefile.tmpl or
656 With this change, the library names were also renamed on Windows
657 and on VMS. They now have names that are closer to the standard
658 on Unix, and include the major version number, and in certain
659 cases, the architecture they are built for. See "Notes on shared
660 libraries" in INSTALL.
662 We rely heavily on the perl module Text::Template.
665 *) Added support for auto-initialisation and de-initialisation of the library.
666 OpenSSL no longer requires explicit init or deinit routines to be called,
667 except in certain circumstances. See the OPENSSL_init_crypto() and
668 OPENSSL_init_ssl() man pages for further information.
671 *) The arguments to the DTLSv1_listen function have changed. Specifically the
672 "peer" argument is now expected to be a BIO_ADDR object.
674 *) Rewrite of BIO networking library. The BIO library lacked consistent
675 support of IPv6, and adding it required some more extensive
676 modifications. This introduces the BIO_ADDR and BIO_ADDRINFO types,
677 which hold all types of addresses and chains of address information.
678 It also introduces a new API, with functions like BIO_socket,
679 BIO_connect, BIO_listen, BIO_lookup and a rewrite of BIO_accept.
680 The source/sink BIOs BIO_s_connect, BIO_s_accept and BIO_s_datagram
681 have been adapted accordingly.
684 *) RSA_padding_check_PKCS1_type_1 now accepts inputs with and without
688 *) CRIME protection: disable compression by default, even if OpenSSL is
689 compiled with zlib enabled. Applications can still enable compression
690 by calling SSL_CTX_clear_options(ctx, SSL_OP_NO_COMPRESSION), or by
691 using the SSL_CONF library to configure compression.
694 *) The signature of the session callback configured with
695 SSL_CTX_sess_set_get_cb was changed. The read-only input buffer
696 was explicitly marked as 'const unsigned char*' instead of
700 *) Always DPURIFY. Remove the use of uninitialized memory in the
701 RNG, and other conditional uses of DPURIFY. This makes -DPURIFY a no-op.
704 *) Removed many obsolete configuration items, including
705 DES_PTR, DES_RISC1, DES_RISC2, DES_INT
706 MD2_CHAR, MD2_INT, MD2_LONG
708 IDEA_SHORT, IDEA_LONG
709 RC2_SHORT, RC2_LONG, RC4_LONG, RC4_CHUNK, RC4_INDEX
710 [Rich Salz, with advice from Andy Polyakov]
712 *) Many BN internals have been moved to an internal header file.
713 [Rich Salz with help from Andy Polyakov]
715 *) Configuration and writing out the results from it has changed.
716 Files such as Makefile include/openssl/opensslconf.h and are now
717 produced through general templates, such as Makefile.in and
718 crypto/opensslconf.h.in and some help from the perl module
721 Also, the center of configuration information is no longer
722 Makefile. Instead, Configure produces a perl module in
723 configdata.pm which holds most of the config data (in the hash
724 table %config), the target data that comes from the target
725 configuration in one of the Configurations/*.conf files (in
729 *) To clarify their intended purposes, the Configure options
730 --prefix and --openssldir change their semantics, and become more
731 straightforward and less interdependent.
733 --prefix shall be used exclusively to give the location INSTALLTOP
734 where programs, scripts, libraries, include files and manuals are
735 going to be installed. The default is now /usr/local.
737 --openssldir shall be used exclusively to give the default
738 location OPENSSLDIR where certificates, private keys, CRLs are
739 managed. This is also where the default openssl.cnf gets
741 If the directory given with this option is a relative path, the
742 values of both the --prefix value and the --openssldir value will
743 be combined to become OPENSSLDIR.
744 The default for --openssldir is INSTALLTOP/ssl.
746 Anyone who uses --openssldir to specify where OpenSSL is to be
747 installed MUST change to use --prefix instead.
750 *) The GOST engine was out of date and therefore it has been removed. An up
751 to date GOST engine is now being maintained in an external repository.
752 See: https://wiki.openssl.org/index.php/Binaries. Libssl still retains
753 support for GOST ciphersuites (these are only activated if a GOST engine
757 *) EGD is no longer supported by default; use enable-egd when
759 [Ben Kaduk and Rich Salz]
761 *) The distribution now has Makefile.in files, which are used to
762 create Makefile's when Configure is run. *Configure must be run
763 before trying to build now.*
766 *) The return value for SSL_CIPHER_description() for error conditions
770 *) Support for RFC6698/RFC7671 DANE TLSA peer authentication.
772 Obtaining and performing DNSSEC validation of TLSA records is
773 the application's responsibility. The application provides
774 the TLSA records of its choice to OpenSSL, and these are then
775 used to authenticate the peer.
777 The TLSA records need not even come from DNS. They can, for
778 example, be used to implement local end-entity certificate or
779 trust-anchor "pinning", where the "pin" data takes the form
780 of TLSA records, which can augment or replace verification
781 based on the usual WebPKI public certification authorities.
784 *) Revert default OPENSSL_NO_DEPRECATED setting. Instead OpenSSL
785 continues to support deprecated interfaces in default builds.
786 However, applications are strongly advised to compile their
787 source files with -DOPENSSL_API_COMPAT=0x10100000L, which hides
788 the declarations of all interfaces deprecated in 0.9.8, 1.0.0
789 or the 1.1.0 releases.
791 In environments in which all applications have been ported to
792 not use any deprecated interfaces OpenSSL's Configure script
793 should be used with the --api=1.1.0 option to entirely remove
794 support for the deprecated features from the library and
795 unconditionally disable them in the installed headers.
796 Essentially the same effect can be achieved with the "no-deprecated"
797 argument to Configure, except that this will always restrict
798 the build to just the latest API, rather than a fixed API
801 As applications are ported to future revisions of the API,
802 they should update their compile-time OPENSSL_API_COMPAT define
803 accordingly, but in most cases should be able to continue to
804 compile with later releases.
806 The OPENSSL_API_COMPAT versions for 1.0.0, and 0.9.8 are
807 0x10000000L and 0x00908000L, respectively. However those
808 versions did not support the OPENSSL_API_COMPAT feature, and
809 so applications are not typically tested for explicit support
810 of just the undeprecated features of either release.
813 *) Add support for setting the minimum and maximum supported protocol.
814 It can bet set via the SSL_set_min_proto_version() and
815 SSL_set_max_proto_version(), or via the SSL_CONF's MinProtocol and
816 MaxProtcol. It's recommended to use the new APIs to disable
817 protocols instead of disabling individual protocols using
818 SSL_set_options() or SSL_CONF's Protocol. This change also
819 removes support for disabling TLS 1.2 in the OpenSSL TLS
820 client at compile time by defining OPENSSL_NO_TLS1_2_CLIENT.
823 *) Support for ChaCha20 and Poly1305 added to libcrypto and libssl.
826 *) New EC_KEY_METHOD, this replaces the older ECDSA_METHOD and ECDH_METHOD
827 and integrates ECDSA and ECDH functionality into EC. Implementations can
828 now redirect key generation and no longer need to convert to or from
831 Note: the ecdsa.h and ecdh.h headers are now no longer needed and just
832 include the ec.h header file instead.
835 *) Remove support for all 40 and 56 bit ciphers. This includes all the export
836 ciphers who are no longer supported and drops support the ephemeral RSA key
837 exchange. The LOW ciphers currently doesn't have any ciphers in it.
840 *) Made EVP_MD_CTX, EVP_MD, EVP_CIPHER_CTX, EVP_CIPHER and HMAC_CTX
841 opaque. For HMAC_CTX, the following constructors and destructors
844 HMAC_CTX *HMAC_CTX_new(void);
845 void HMAC_CTX_free(HMAC_CTX *ctx);
847 For EVP_MD and EVP_CIPHER, complete APIs to create, fill and
848 destroy such methods has been added. See EVP_MD_meth_new(3) and
849 EVP_CIPHER_meth_new(3) for documentation.
852 1) EVP_MD_CTX_cleanup(), EVP_CIPHER_CTX_cleanup() and
853 HMAC_CTX_cleanup() were removed. HMAC_CTX_reset() and
854 EVP_MD_CTX_reset() should be called instead to reinitialise
855 an already created structure.
856 2) For consistency with the majority of our object creators and
857 destructors, EVP_MD_CTX_(create|destroy) were renamed to
858 EVP_MD_CTX_(new|free). The old names are retained as macros
859 for deprecated builds.
862 *) Added ASYNC support. Libcrypto now includes the async sub-library to enable
863 cryptographic operations to be performed asynchronously as long as an
864 asynchronous capable engine is used. See the ASYNC_start_job() man page for
865 further details. Libssl has also had this capability integrated with the
866 introduction of the new mode SSL_MODE_ASYNC and associated error
867 SSL_ERROR_WANT_ASYNC. See the SSL_CTX_set_mode() and SSL_get_error() man
868 pages. This work was developed in partnership with Intel Corp.
871 *) SSL_{CTX_}set_ecdh_auto() has been removed and ECDH is support is
872 always enabled now. If you want to disable the support you should
873 exclude it using the list of supported ciphers. This also means that the
874 "-no_ecdhe" option has been removed from s_server.
877 *) SSL_{CTX}_set_tmp_ecdh() which can set 1 EC curve now internally calls
878 SSL_{CTX_}set1_curves() which can set a list.
881 *) Remove support for SSL_{CTX_}set_tmp_ecdh_callback(). You should set the
882 curve you want to support using SSL_{CTX_}set1_curves().
885 *) State machine rewrite. The state machine code has been significantly
886 refactored in order to remove much duplication of code and solve issues
887 with the old code (see ssl/statem/README for further details). This change
888 does have some associated API changes. Notably the SSL_state() function
889 has been removed and replaced by SSL_get_state which now returns an
890 "OSSL_HANDSHAKE_STATE" instead of an int. SSL_set_state() has been removed
891 altogether. The previous handshake states defined in ssl.h and ssl3.h have
895 *) All instances of the string "ssleay" in the public API were replaced
896 with OpenSSL (case-matching; e.g., OPENSSL_VERSION for #define's)
897 Some error codes related to internal RSA_eay API's were renamed.
900 *) The demo files in crypto/threads were moved to demo/threads.
903 *) Removed obsolete engines: 4758cca, aep, atalla, cswift, nuron, gmp,
905 [Matt Caswell, Rich Salz]
907 *) New ASN.1 embed macro.
909 New ASN.1 macro ASN1_EMBED. This is the same as ASN1_SIMPLE except the
910 structure is not allocated: it is part of the parent. That is instead of
918 This reduces memory fragmentation and make it impossible to accidentally
919 set a mandatory field to NULL.
921 This currently only works for some fields specifically a SEQUENCE, CHOICE,
922 or ASN1_STRING type which is part of a parent SEQUENCE. Since it is
923 equivalent to ASN1_SIMPLE it cannot be tagged, OPTIONAL, SET OF or
927 *) Remove EVP_CHECK_DES_KEY, a compile-time option that never compiled.
930 *) Removed DES and RC4 ciphersuites from DEFAULT. Also removed RC2 although
931 in 1.0.2 EXPORT was already removed and the only RC2 ciphersuite is also
932 an EXPORT one. COMPLEMENTOFDEFAULT has been updated accordingly to add
933 DES and RC4 ciphersuites.
936 *) Rewrite EVP_DecodeUpdate (base64 decoding) to fix several bugs.
937 This changes the decoding behaviour for some invalid messages,
938 though the change is mostly in the more lenient direction, and
939 legacy behaviour is preserved as much as possible.
942 *) Fix no-stdio build.
943 [ David Woodhouse <David.Woodhouse@intel.com> and also
944 Ivan Nestlerode <ivan.nestlerode@sonos.com> ]
946 *) New testing framework
947 The testing framework has been largely rewritten and is now using
948 perl and the perl modules Test::Harness and an extended variant of
949 Test::More called OpenSSL::Test to do its work. All test scripts in
950 test/ have been rewritten into test recipes, and all direct calls to
951 executables in test/Makefile have become individual recipes using the
952 simplified testing OpenSSL::Test::Simple.
954 For documentation on our testing modules, do:
956 perldoc test/testlib/OpenSSL/Test/Simple.pm
957 perldoc test/testlib/OpenSSL/Test.pm
961 *) Revamped memory debug; only -DCRYPTO_MDEBUG and -DCRYPTO_MDEBUG_ABORT
962 are used; the latter aborts on memory leaks (usually checked on exit).
963 Some undocumented "set malloc, etc., hooks" functions were removed
964 and others were changed. All are now documented.
967 *) In DSA_generate_parameters_ex, if the provided seed is too short,
969 [Rich Salz and Ismo Puustinen <ismo.puustinen@intel.com>]
971 *) Rewrite PSK to support ECDHE_PSK, DHE_PSK and RSA_PSK. Add ciphersuites
972 from RFC4279, RFC4785, RFC5487, RFC5489.
974 Thanks to Christian J. Dietrich and Giuseppe D'Angelo for the
975 original RSA_PSK patch.
978 *) Dropped support for the SSL3_FLAGS_DELAY_CLIENT_FINISHED flag. This SSLeay
979 era flag was never set throughout the codebase (only read). Also removed
980 SSL3_FLAGS_POP_BUFFER which was only used if
981 SSL3_FLAGS_DELAY_CLIENT_FINISHED was also set.
984 *) Changed the default name options in the "ca", "crl", "req" and "x509"
985 to be "oneline" instead of "compat".
988 *) Remove SSL_OP_TLS_BLOCK_PADDING_BUG. This is SSLeay legacy, we're
989 not aware of clients that still exhibit this bug, and the workaround
990 hasn't been working properly for a while.
993 *) The return type of BIO_number_read() and BIO_number_written() as well as
994 the corresponding num_read and num_write members in the BIO structure has
995 changed from unsigned long to uint64_t. On platforms where an unsigned
996 long is 32 bits (e.g. Windows) these counters could overflow if >4Gb is
1000 *) Given the pervasive nature of TLS extensions it is inadvisable to run
1001 OpenSSL without support for them. It also means that maintaining
1002 the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
1003 not well tested). Therefore the OPENSSL_NO_TLSEXT option has been removed.
1006 *) Removed support for the two export grade static DH ciphersuites
1007 EXP-DH-RSA-DES-CBC-SHA and EXP-DH-DSS-DES-CBC-SHA. These two ciphersuites
1008 were newly added (along with a number of other static DH ciphersuites) to
1009 1.0.2. However the two export ones have *never* worked since they were
1010 introduced. It seems strange in any case to be adding new export
1011 ciphersuites, and given "logjam" it also does not seem correct to fix them.
1014 *) Version negotiation has been rewritten. In particular SSLv23_method(),
1015 SSLv23_client_method() and SSLv23_server_method() have been deprecated,
1016 and turned into macros which simply call the new preferred function names
1017 TLS_method(), TLS_client_method() and TLS_server_method(). All new code
1018 should use the new names instead. Also as part of this change the ssl23.h
1019 header file has been removed.
1022 *) Support for Kerberos ciphersuites in TLS (RFC2712) has been removed. This
1023 code and the associated standard is no longer considered fit-for-purpose.
1026 *) RT2547 was closed. When generating a private key, try to make the
1027 output file readable only by the owner. This behavior change might
1028 be noticeable when interacting with other software.
1030 *) Documented all exdata functions. Added CRYPTO_free_ex_index.
1034 *) Added HTTP GET support to the ocsp command.
1037 *) Changed default digest for the dgst and enc commands from MD5 to
1041 *) RAND_pseudo_bytes has been deprecated. Users should use RAND_bytes instead.
1044 *) Added support for TLS extended master secret from
1045 draft-ietf-tls-session-hash-03.txt. Thanks for Alfredo Pironti for an
1046 initial patch which was a great help during development.
1049 *) All libssl internal structures have been removed from the public header
1050 files, and the OPENSSL_NO_SSL_INTERN option has been removed (since it is
1051 now redundant). Users should not attempt to access internal structures
1052 directly. Instead they should use the provided API functions.
1055 *) config has been changed so that by default OPENSSL_NO_DEPRECATED is used.
1056 Access to deprecated functions can be re-enabled by running config with
1057 "enable-deprecated". In addition applications wishing to use deprecated
1058 functions must define OPENSSL_USE_DEPRECATED. Note that this new behaviour
1059 will, by default, disable some transitive includes that previously existed
1060 in the header files (e.g. ec.h will no longer, by default, include bn.h)
1063 *) Added support for OCB mode. OpenSSL has been granted a patent license
1064 compatible with the OpenSSL license for use of OCB. Details are available
1065 at https://www.openssl.org/source/OCB-patent-grant-OpenSSL.pdf. Support
1066 for OCB can be removed by calling config with no-ocb.
1069 *) SSLv2 support has been removed. It still supports receiving a SSLv2
1070 compatible client hello.
1073 *) Increased the minimal RSA keysize from 256 to 512 bits [Rich Salz],
1074 done while fixing the error code for the key-too-small case.
1075 [Annie Yousar <a.yousar@informatik.hu-berlin.de>]
1077 *) CA.sh has been removed; use CA.pl instead.
1080 *) Removed old DES API.
1083 *) Remove various unsupported platforms:
1089 Sinix/ReliantUNIX RM400
1094 16-bit platforms such as WIN16
1097 *) Clean up OPENSSL_NO_xxx #define's
1098 Use setbuf() and remove OPENSSL_NO_SETVBUF_IONBF
1099 Rename OPENSSL_SYSNAME_xxx to OPENSSL_SYS_xxx
1100 OPENSSL_NO_EC{DH,DSA} merged into OPENSSL_NO_EC
1101 OPENSSL_NO_RIPEMD160, OPENSSL_NO_RIPEMD merged into OPENSSL_NO_RMD160
1102 OPENSSL_NO_FP_API merged into OPENSSL_NO_STDIO
1103 Remove OPENSSL_NO_BIO OPENSSL_NO_BUFFER OPENSSL_NO_CHAIN_VERIFY
1104 OPENSSL_NO_EVP OPENSSL_NO_FIPS_ERR OPENSSL_NO_HASH_COMP
1105 OPENSSL_NO_LHASH OPENSSL_NO_OBJECT OPENSSL_NO_SPEED OPENSSL_NO_STACK
1106 OPENSSL_NO_X509 OPENSSL_NO_X509_VERIFY
1107 Remove MS_STATIC; it's a relic from platforms <32 bits.
1110 *) Cleaned up dead code
1111 Remove all but one '#ifdef undef' which is to be looked at.
1114 *) Clean up calling of xxx_free routines.
1115 Just like free(), fix most of the xxx_free routines to accept
1116 NULL. Remove the non-null checks from callers. Save much code.
1119 *) Add secure heap for storage of private keys (when possible).
1120 Add BIO_s_secmem(), CBIGNUM, etc.
1121 Contributed by Akamai Technologies under our Corporate CLA.
1124 *) Experimental support for a new, fast, unbiased prime candidate generator,
1125 bn_probable_prime_dh_coprime(). Not currently used by any prime generator.
1126 [Felix Laurie von Massenbach <felix@erbridge.co.uk>]
1128 *) New output format NSS in the sess_id command line tool. This allows
1129 exporting the session id and the master key in NSS keylog format.
1130 [Martin Kaiser <martin@kaiser.cx>]
1132 *) Harmonize version and its documentation. -f flag is used to display
1134 [mancha <mancha1@zoho.com>]
1136 *) Fix eckey_priv_encode so it immediately returns an error upon a failure
1137 in i2d_ECPrivateKey. Thanks to Ted Unangst for feedback on this issue.
1138 [mancha <mancha1@zoho.com>]
1140 *) Fix some double frees. These are not thought to be exploitable.
1141 [mancha <mancha1@zoho.com>]
1143 *) A missing bounds check in the handling of the TLS heartbeat extension
1144 can be used to reveal up to 64k of memory to a connected client or
1147 Thanks for Neel Mehta of Google Security for discovering this bug and to
1148 Adam Langley <agl@chromium.org> and Bodo Moeller <bmoeller@acm.org> for
1149 preparing the fix (CVE-2014-0160)
1150 [Adam Langley, Bodo Moeller]
1152 *) Fix for the attack described in the paper "Recovering OpenSSL
1153 ECDSA Nonces Using the FLUSH+RELOAD Cache Side-channel Attack"
1154 by Yuval Yarom and Naomi Benger. Details can be obtained from:
1155 http://eprint.iacr.org/2014/140
1157 Thanks to Yuval Yarom and Naomi Benger for discovering this
1158 flaw and to Yuval Yarom for supplying a fix (CVE-2014-0076)
1159 [Yuval Yarom and Naomi Benger]
1161 *) Use algorithm specific chains in SSL_CTX_use_certificate_chain_file():
1162 this fixes a limitation in previous versions of OpenSSL.
1165 *) Experimental encrypt-then-mac support.
1167 Experimental support for encrypt then mac from
1168 draft-gutmann-tls-encrypt-then-mac-02.txt
1170 To enable it set the appropriate extension number (0x42 for the test
1171 server) using e.g. -DTLSEXT_TYPE_encrypt_then_mac=0x42
1173 For non-compliant peers (i.e. just about everything) this should have no
1176 WARNING: EXPERIMENTAL, SUBJECT TO CHANGE.
1180 *) Add EVP support for key wrapping algorithms, to avoid problems with
1181 existing code the flag EVP_CIPHER_CTX_WRAP_ALLOW has to be set in
1182 the EVP_CIPHER_CTX or an error is returned. Add AES and DES3 wrap
1183 algorithms and include tests cases.
1186 *) Extend CMS code to support RSA-PSS signatures and RSA-OAEP for
1190 *) Extended RSA OAEP support via EVP_PKEY API. Options to specify digest,
1191 MGF1 digest and OAEP label.
1194 *) Make openssl verify return errors.
1195 [Chris Palmer <palmer@google.com> and Ben Laurie]
1197 *) New function ASN1_TIME_diff to calculate the difference between two
1198 ASN1_TIME structures or one structure and the current time.
1201 *) Update fips_test_suite to support multiple command line options. New
1202 test to induce all self test errors in sequence and check expected
1206 *) Add FIPS_{rsa,dsa,ecdsa}_{sign,verify} functions which digest and
1207 sign or verify all in one operation.
1210 *) Add fips_algvs: a multicall fips utility incorporating all the algorithm
1211 test programs and fips_test_suite. Includes functionality to parse
1212 the minimal script output of fipsalgest.pl directly.
1215 *) Add authorisation parameter to FIPS_module_mode_set().
1218 *) Add FIPS selftest for ECDH algorithm using P-224 and B-233 curves.
1221 *) Use separate DRBG fields for internal and external flags. New function
1222 FIPS_drbg_health_check() to perform on demand health checking. Add
1223 generation tests to fips_test_suite with reduced health check interval to
1224 demonstrate periodic health checking. Add "nodh" option to
1225 fips_test_suite to skip very slow DH test.
1228 *) New function FIPS_get_cipherbynid() to lookup FIPS supported ciphers
1232 *) More extensive health check for DRBG checking many more failure modes.
1233 New function FIPS_selftest_drbg_all() to handle every possible DRBG
1234 combination: call this in fips_test_suite.
1237 *) Add support for canonical generation of DSA parameter 'g'. See
1240 *) Add support for HMAC DRBG from SP800-90. Update DRBG algorithm test and
1241 POST to handle HMAC cases.
1244 *) Add functions FIPS_module_version() and FIPS_module_version_text()
1245 to return numerical and string versions of the FIPS module number.
1248 *) Rename FIPS_mode_set and FIPS_mode to FIPS_module_mode_set and
1249 FIPS_module_mode. FIPS_mode and FIPS_mode_set will be implemented
1250 outside the validated module in the FIPS capable OpenSSL.
1253 *) Minor change to DRBG entropy callback semantics. In some cases
1254 there is no multiple of the block length between min_len and
1255 max_len. Allow the callback to return more than max_len bytes
1256 of entropy but discard any extra: it is the callback's responsibility
1257 to ensure that the extra data discarded does not impact the
1258 requested amount of entropy.
1261 *) Add PRNG security strength checks to RSA, DSA and ECDSA using
1262 information in FIPS186-3, SP800-57 and SP800-131A.
1265 *) CCM support via EVP. Interface is very similar to GCM case except we
1266 must supply all data in one chunk (i.e. no update, final) and the
1267 message length must be supplied if AAD is used. Add algorithm test
1271 *) Initial version of POST overhaul. Add POST callback to allow the status
1272 of POST to be monitored and/or failures induced. Modify fips_test_suite
1273 to use callback. Always run all selftests even if one fails.
1276 *) XTS support including algorithm test driver in the fips_gcmtest program.
1277 Note: this does increase the maximum key length from 32 to 64 bytes but
1278 there should be no binary compatibility issues as existing applications
1279 will never use XTS mode.
1282 *) Extensive reorganisation of FIPS PRNG behaviour. Remove all dependencies
1283 to OpenSSL RAND code and replace with a tiny FIPS RAND API which also
1284 performs algorithm blocking for unapproved PRNG types. Also do not
1285 set PRNG type in FIPS_mode_set(): leave this to the application.
1286 Add default OpenSSL DRBG handling: sets up FIPS PRNG and seeds with
1287 the standard OpenSSL PRNG: set additional data to a date time vector.
1290 *) Rename old X9.31 PRNG functions of the form FIPS_rand* to FIPS_x931*.
1291 This shouldn't present any incompatibility problems because applications
1292 shouldn't be using these directly and any that are will need to rethink
1293 anyway as the X9.31 PRNG is now deprecated by FIPS 140-2
1296 *) Extensive self tests and health checking required by SP800-90 DRBG.
1297 Remove strength parameter from FIPS_drbg_instantiate and always
1298 instantiate at maximum supported strength.
1301 *) Add ECDH code to fips module and fips_ecdhvs for primitives only testing.
1304 *) New algorithm test program fips_dhvs to handle DH primitives only testing.
1307 *) New function DH_compute_key_padded() to compute a DH key and pad with
1308 leading zeroes if needed: this complies with SP800-56A et al.
1311 *) Initial implementation of SP800-90 DRBGs for Hash and CTR. Not used by
1312 anything, incomplete, subject to change and largely untested at present.
1315 *) Modify fipscanisteronly build option to only build the necessary object
1316 files by filtering FIPS_EX_OBJ through a perl script in crypto/Makefile.
1319 *) Add experimental option FIPSSYMS to give all symbols in
1320 fipscanister.o and FIPS or fips prefix. This will avoid
1321 conflicts with future versions of OpenSSL. Add perl script
1322 util/fipsas.pl to preprocess assembly language source files
1323 and rename any affected symbols.
1326 *) Add selftest checks and algorithm block of non-fips algorithms in
1327 FIPS mode. Remove DES2 from selftests.
1330 *) Add ECDSA code to fips module. Add tiny fips_ecdsa_check to just
1331 return internal method without any ENGINE dependencies. Add new
1332 tiny fips sign and verify functions.
1335 *) New build option no-ec2m to disable characteristic 2 code.
1338 *) New build option "fipscanisteronly". This only builds fipscanister.o
1339 and (currently) associated fips utilities. Uses the file Makefile.fips
1340 instead of Makefile.org as the prototype.
1343 *) Add some FIPS mode restrictions to GCM. Add internal IV generator.
1344 Update fips_gcmtest to use IV generator.
1347 *) Initial, experimental EVP support for AES-GCM. AAD can be input by
1348 setting output buffer to NULL. The *Final function must be
1349 called although it will not retrieve any additional data. The tag
1350 can be set or retrieved with a ctrl. The IV length is by default 12
1351 bytes (96 bits) but can be set to an alternative value. If the IV
1352 length exceeds the maximum IV length (currently 16 bytes) it cannot be
1356 *) New flag in ciphers: EVP_CIPH_FLAG_CUSTOM_CIPHER. This means the
1357 underlying do_cipher function handles all cipher semantics itself
1358 including padding and finalisation. This is useful if (for example)
1359 an ENGINE cipher handles block padding itself. The behaviour of
1360 do_cipher is subtly changed if this flag is set: the return value
1361 is the number of characters written to the output buffer (zero is
1362 no longer an error code) or a negative error code. Also if the
1363 input buffer is NULL and length 0 finalisation should be performed.
1366 *) If a candidate issuer certificate is already part of the constructed
1367 path ignore it: new debug notification X509_V_ERR_PATH_LOOP for this case.
1370 *) Improve forward-security support: add functions
1372 void SSL_CTX_set_not_resumable_session_callback(SSL_CTX *ctx, int (*cb)(SSL *ssl, int is_forward_secure))
1373 void SSL_set_not_resumable_session_callback(SSL *ssl, int (*cb)(SSL *ssl, int is_forward_secure))
1375 for use by SSL/TLS servers; the callback function will be called whenever a
1376 new session is created, and gets to decide whether the session may be
1377 cached to make it resumable (return 0) or not (return 1). (As by the
1378 SSL/TLS protocol specifications, the session_id sent by the server will be
1379 empty to indicate that the session is not resumable; also, the server will
1380 not generate RFC 4507 (RFC 5077) session tickets.)
1382 A simple reasonable callback implementation is to return is_forward_secure.
1383 This parameter will be set to 1 or 0 depending on the ciphersuite selected
1384 by the SSL/TLS server library, indicating whether it can provide forward
1386 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
1388 *) New -verify_name option in command line utilities to set verification
1392 *) Initial CMAC implementation. WARNING: EXPERIMENTAL, API MAY CHANGE.
1393 Add CMAC pkey methods.
1396 *) Experimental renegotiation in s_server -www mode. If the client
1397 browses /reneg connection is renegotiated. If /renegcert it is
1398 renegotiated requesting a certificate.
1401 *) Add an "external" session cache for debugging purposes to s_server. This
1402 should help trace issues which normally are only apparent in deployed
1403 multi-process servers.
1406 *) Extensive audit of libcrypto with DEBUG_UNUSED. Fix many cases where
1407 return value is ignored. NB. The functions RAND_add(), RAND_seed(),
1408 BIO_set_cipher() and some obscure PEM functions were changed so they
1409 can now return an error. The RAND changes required a change to the
1410 RAND_METHOD structure.
1413 *) New macro __owur for "OpenSSL Warn Unused Result". This makes use of
1414 a gcc attribute to warn if the result of a function is ignored. This
1415 is enable if DEBUG_UNUSED is set. Add to several functions in evp.h
1416 whose return value is often ignored.
1419 *) New -noct, -requestct, -requirect and -ctlogfile options for s_client.
1420 These allow SCTs (signed certificate timestamps) to be requested and
1421 validated when establishing a connection.
1422 [Rob Percival <robpercival@google.com>]
1424 Changes between 1.0.2g and 1.0.2h [3 May 2016]
1426 *) Prevent padding oracle in AES-NI CBC MAC check
1428 A MITM attacker can use a padding oracle attack to decrypt traffic
1429 when the connection uses an AES CBC cipher and the server support
1432 This issue was introduced as part of the fix for Lucky 13 padding
1433 attack (CVE-2013-0169). The padding check was rewritten to be in
1434 constant time by making sure that always the same bytes are read and
1435 compared against either the MAC or padding bytes. But it no longer
1436 checked that there was enough data to have both the MAC and padding
1439 This issue was reported by Juraj Somorovsky using TLS-Attacker.
1443 *) Fix EVP_EncodeUpdate overflow
1445 An overflow can occur in the EVP_EncodeUpdate() function which is used for
1446 Base64 encoding of binary data. If an attacker is able to supply very large
1447 amounts of input data then a length check can overflow resulting in a heap
1450 Internally to OpenSSL the EVP_EncodeUpdate() function is primarily used by
1451 the PEM_write_bio* family of functions. These are mainly used within the
1452 OpenSSL command line applications, so any application which processes data
1453 from an untrusted source and outputs it as a PEM file should be considered
1454 vulnerable to this issue. User applications that call these APIs directly
1455 with large amounts of untrusted data may also be vulnerable.
1457 This issue was reported by Guido Vranken.
1461 *) Fix EVP_EncryptUpdate overflow
1463 An overflow can occur in the EVP_EncryptUpdate() function. If an attacker
1464 is able to supply very large amounts of input data after a previous call to
1465 EVP_EncryptUpdate() with a partial block then a length check can overflow
1466 resulting in a heap corruption. Following an analysis of all OpenSSL
1467 internal usage of the EVP_EncryptUpdate() function all usage is one of two
1468 forms. The first form is where the EVP_EncryptUpdate() call is known to be
1469 the first called function after an EVP_EncryptInit(), and therefore that
1470 specific call must be safe. The second form is where the length passed to
1471 EVP_EncryptUpdate() can be seen from the code to be some small value and
1472 therefore there is no possibility of an overflow. Since all instances are
1473 one of these two forms, it is believed that there can be no overflows in
1474 internal code due to this problem. It should be noted that
1475 EVP_DecryptUpdate() can call EVP_EncryptUpdate() in certain code paths.
1476 Also EVP_CipherUpdate() is a synonym for EVP_EncryptUpdate(). All instances
1477 of these calls have also been analysed too and it is believed there are no
1478 instances in internal usage where an overflow could occur.
1480 This issue was reported by Guido Vranken.
1484 *) Prevent ASN.1 BIO excessive memory allocation
1486 When ASN.1 data is read from a BIO using functions such as d2i_CMS_bio()
1487 a short invalid encoding can cause allocation of large amounts of memory
1488 potentially consuming excessive resources or exhausting memory.
1490 Any application parsing untrusted data through d2i BIO functions is
1491 affected. The memory based functions such as d2i_X509() are *not* affected.
1492 Since the memory based functions are used by the TLS library, TLS
1493 applications are not affected.
1495 This issue was reported by Brian Carpenter.
1501 ASN1 Strings that are over 1024 bytes can cause an overread in applications
1502 using the X509_NAME_oneline() function on EBCDIC systems. This could result
1503 in arbitrary stack data being returned in the buffer.
1505 This issue was reported by Guido Vranken.
1509 *) Modify behavior of ALPN to invoke callback after SNI/servername
1510 callback, such that updates to the SSL_CTX affect ALPN.
1513 *) Remove LOW from the DEFAULT cipher list. This removes singles DES from the
1517 *) Only remove the SSLv2 methods with the no-ssl2-method option. When the
1518 methods are enabled and ssl2 is disabled the methods return NULL.
1521 Changes between 1.0.2f and 1.0.2g [1 Mar 2016]
1523 * Disable weak ciphers in SSLv3 and up in default builds of OpenSSL.
1524 Builds that are not configured with "enable-weak-ssl-ciphers" will not
1525 provide any "EXPORT" or "LOW" strength ciphers.
1528 * Disable SSLv2 default build, default negotiation and weak ciphers. SSLv2
1529 is by default disabled at build-time. Builds that are not configured with
1530 "enable-ssl2" will not support SSLv2. Even if "enable-ssl2" is used,
1531 users who want to negotiate SSLv2 via the version-flexible SSLv23_method()
1532 will need to explicitly call either of:
1534 SSL_CTX_clear_options(ctx, SSL_OP_NO_SSLv2);
1536 SSL_clear_options(ssl, SSL_OP_NO_SSLv2);
1538 as appropriate. Even if either of those is used, or the application
1539 explicitly uses the version-specific SSLv2_method() or its client and
1540 server variants, SSLv2 ciphers vulnerable to exhaustive search key
1541 recovery have been removed. Specifically, the SSLv2 40-bit EXPORT
1542 ciphers, and SSLv2 56-bit DES are no longer available.
1546 *) Fix a double-free in DSA code
1548 A double free bug was discovered when OpenSSL parses malformed DSA private
1549 keys and could lead to a DoS attack or memory corruption for applications
1550 that receive DSA private keys from untrusted sources. This scenario is
1553 This issue was reported to OpenSSL by Adam Langley(Google/BoringSSL) using
1558 *) Disable SRP fake user seed to address a server memory leak.
1560 Add a new method SRP_VBASE_get1_by_user that handles the seed properly.
1562 SRP_VBASE_get_by_user had inconsistent memory management behaviour.
1563 In order to fix an unavoidable memory leak, SRP_VBASE_get_by_user
1564 was changed to ignore the "fake user" SRP seed, even if the seed
1567 Users should use SRP_VBASE_get1_by_user instead. Note that in
1568 SRP_VBASE_get1_by_user, caller must free the returned value. Note
1569 also that even though configuring the SRP seed attempts to hide
1570 invalid usernames by continuing the handshake with fake
1571 credentials, this behaviour is not constant time and no strong
1572 guarantees are made that the handshake is indistinguishable from
1573 that of a valid user.
1577 *) Fix BN_hex2bn/BN_dec2bn NULL pointer deref/heap corruption
1579 In the BN_hex2bn function the number of hex digits is calculated using an
1580 int value |i|. Later |bn_expand| is called with a value of |i * 4|. For
1581 large values of |i| this can result in |bn_expand| not allocating any
1582 memory because |i * 4| is negative. This can leave the internal BIGNUM data
1583 field as NULL leading to a subsequent NULL ptr deref. For very large values
1584 of |i|, the calculation |i * 4| could be a positive value smaller than |i|.
1585 In this case memory is allocated to the internal BIGNUM data field, but it
1586 is insufficiently sized leading to heap corruption. A similar issue exists
1587 in BN_dec2bn. This could have security consequences if BN_hex2bn/BN_dec2bn
1588 is ever called by user applications with very large untrusted hex/dec data.
1589 This is anticipated to be a rare occurrence.
1591 All OpenSSL internal usage of these functions use data that is not expected
1592 to be untrusted, e.g. config file data or application command line
1593 arguments. If user developed applications generate config file data based
1594 on untrusted data then it is possible that this could also lead to security
1595 consequences. This is also anticipated to be rare.
1597 This issue was reported to OpenSSL by Guido Vranken.
1601 *) Fix memory issues in BIO_*printf functions
1603 The internal |fmtstr| function used in processing a "%s" format string in
1604 the BIO_*printf functions could overflow while calculating the length of a
1605 string and cause an OOB read when printing very long strings.
1607 Additionally the internal |doapr_outch| function can attempt to write to an
1608 OOB memory location (at an offset from the NULL pointer) in the event of a
1609 memory allocation failure. In 1.0.2 and below this could be caused where
1610 the size of a buffer to be allocated is greater than INT_MAX. E.g. this
1611 could be in processing a very long "%s" format string. Memory leaks can
1614 The first issue may mask the second issue dependent on compiler behaviour.
1615 These problems could enable attacks where large amounts of untrusted data
1616 is passed to the BIO_*printf functions. If applications use these functions
1617 in this way then they could be vulnerable. OpenSSL itself uses these
1618 functions when printing out human-readable dumps of ASN.1 data. Therefore
1619 applications that print this data could be vulnerable if the data is from
1620 untrusted sources. OpenSSL command line applications could also be
1621 vulnerable where they print out ASN.1 data, or if untrusted data is passed
1622 as command line arguments.
1624 Libssl is not considered directly vulnerable. Additionally certificates etc
1625 received via remote connections via libssl are also unlikely to be able to
1626 trigger these issues because of message size limits enforced within libssl.
1628 This issue was reported to OpenSSL Guido Vranken.
1632 *) Side channel attack on modular exponentiation
1634 A side-channel attack was found which makes use of cache-bank conflicts on
1635 the Intel Sandy-Bridge microarchitecture which could lead to the recovery
1636 of RSA keys. The ability to exploit this issue is limited as it relies on
1637 an attacker who has control of code in a thread running on the same
1638 hyper-threaded core as the victim thread which is performing decryptions.
1640 This issue was reported to OpenSSL by Yuval Yarom, The University of
1641 Adelaide and NICTA, Daniel Genkin, Technion and Tel Aviv University, and
1642 Nadia Heninger, University of Pennsylvania with more information at
1643 http://cachebleed.info.
1647 *) Change the req app to generate a 2048-bit RSA/DSA key by default,
1648 if no keysize is specified with default_bits. This fixes an
1649 omission in an earlier change that changed all RSA/DSA key generation
1650 apps to use 2048 bits by default.
1653 Changes between 1.0.2e and 1.0.2f [28 Jan 2016]
1654 *) DH small subgroups
1656 Historically OpenSSL only ever generated DH parameters based on "safe"
1657 primes. More recently (in version 1.0.2) support was provided for
1658 generating X9.42 style parameter files such as those required for RFC 5114
1659 support. The primes used in such files may not be "safe". Where an
1660 application is using DH configured with parameters based on primes that are
1661 not "safe" then an attacker could use this fact to find a peer's private
1662 DH exponent. This attack requires that the attacker complete multiple
1663 handshakes in which the peer uses the same private DH exponent. For example
1664 this could be used to discover a TLS server's private DH exponent if it's
1665 reusing the private DH exponent or it's using a static DH ciphersuite.
1667 OpenSSL provides the option SSL_OP_SINGLE_DH_USE for ephemeral DH (DHE) in
1668 TLS. It is not on by default. If the option is not set then the server
1669 reuses the same private DH exponent for the life of the server process and
1670 would be vulnerable to this attack. It is believed that many popular
1671 applications do set this option and would therefore not be at risk.
1673 The fix for this issue adds an additional check where a "q" parameter is
1674 available (as is the case in X9.42 based parameters). This detects the
1675 only known attack, and is the only possible defense for static DH
1676 ciphersuites. This could have some performance impact.
1678 Additionally the SSL_OP_SINGLE_DH_USE option has been switched on by
1679 default and cannot be disabled. This could have some performance impact.
1681 This issue was reported to OpenSSL by Antonio Sanso (Adobe).
1685 *) SSLv2 doesn't block disabled ciphers
1687 A malicious client can negotiate SSLv2 ciphers that have been disabled on
1688 the server and complete SSLv2 handshakes even if all SSLv2 ciphers have
1689 been disabled, provided that the SSLv2 protocol was not also disabled via
1692 This issue was reported to OpenSSL on 26th December 2015 by Nimrod Aviram
1693 and Sebastian Schinzel.
1697 Changes between 1.0.2d and 1.0.2e [3 Dec 2015]
1699 *) BN_mod_exp may produce incorrect results on x86_64
1701 There is a carry propagating bug in the x86_64 Montgomery squaring
1702 procedure. No EC algorithms are affected. Analysis suggests that attacks
1703 against RSA and DSA as a result of this defect would be very difficult to
1704 perform and are not believed likely. Attacks against DH are considered just
1705 feasible (although very difficult) because most of the work necessary to
1706 deduce information about a private key may be performed offline. The amount
1707 of resources required for such an attack would be very significant and
1708 likely only accessible to a limited number of attackers. An attacker would
1709 additionally need online access to an unpatched system using the target
1710 private key in a scenario with persistent DH parameters and a private
1711 key that is shared between multiple clients. For example this can occur by
1712 default in OpenSSL DHE based SSL/TLS ciphersuites.
1714 This issue was reported to OpenSSL by Hanno Böck.
1718 *) Certificate verify crash with missing PSS parameter
1720 The signature verification routines will crash with a NULL pointer
1721 dereference if presented with an ASN.1 signature using the RSA PSS
1722 algorithm and absent mask generation function parameter. Since these
1723 routines are used to verify certificate signature algorithms this can be
1724 used to crash any certificate verification operation and exploited in a
1725 DoS attack. Any application which performs certificate verification is
1726 vulnerable including OpenSSL clients and servers which enable client
1729 This issue was reported to OpenSSL by Loïc Jonas Etienne (Qnective AG).
1733 *) X509_ATTRIBUTE memory leak
1735 When presented with a malformed X509_ATTRIBUTE structure OpenSSL will leak
1736 memory. This structure is used by the PKCS#7 and CMS routines so any
1737 application which reads PKCS#7 or CMS data from untrusted sources is
1738 affected. SSL/TLS is not affected.
1740 This issue was reported to OpenSSL by Adam Langley (Google/BoringSSL) using
1745 *) Rewrite EVP_DecodeUpdate (base64 decoding) to fix several bugs.
1746 This changes the decoding behaviour for some invalid messages,
1747 though the change is mostly in the more lenient direction, and
1748 legacy behaviour is preserved as much as possible.
1751 *) In DSA_generate_parameters_ex, if the provided seed is too short,
1753 [Rich Salz and Ismo Puustinen <ismo.puustinen@intel.com>]
1755 Changes between 1.0.2c and 1.0.2d [9 Jul 2015]
1757 *) Alternate chains certificate forgery
1759 During certificate verification, OpenSSL will attempt to find an
1760 alternative certificate chain if the first attempt to build such a chain
1761 fails. An error in the implementation of this logic can mean that an
1762 attacker could cause certain checks on untrusted certificates to be
1763 bypassed, such as the CA flag, enabling them to use a valid leaf
1764 certificate to act as a CA and "issue" an invalid certificate.
1766 This issue was reported to OpenSSL by Adam Langley/David Benjamin
1770 Changes between 1.0.2b and 1.0.2c [12 Jun 2015]
1772 *) Fix HMAC ABI incompatibility. The previous version introduced an ABI
1773 incompatibility in the handling of HMAC. The previous ABI has now been
1777 Changes between 1.0.2a and 1.0.2b [11 Jun 2015]
1779 *) Malformed ECParameters causes infinite loop
1781 When processing an ECParameters structure OpenSSL enters an infinite loop
1782 if the curve specified is over a specially malformed binary polynomial
1785 This can be used to perform denial of service against any
1786 system which processes public keys, certificate requests or
1787 certificates. This includes TLS clients and TLS servers with
1788 client authentication enabled.
1790 This issue was reported to OpenSSL by Joseph Barr-Pixton.
1794 *) Exploitable out-of-bounds read in X509_cmp_time
1796 X509_cmp_time does not properly check the length of the ASN1_TIME
1797 string and can read a few bytes out of bounds. In addition,
1798 X509_cmp_time accepts an arbitrary number of fractional seconds in the
1801 An attacker can use this to craft malformed certificates and CRLs of
1802 various sizes and potentially cause a segmentation fault, resulting in
1803 a DoS on applications that verify certificates or CRLs. TLS clients
1804 that verify CRLs are affected. TLS clients and servers with client
1805 authentication enabled may be affected if they use custom verification
1808 This issue was reported to OpenSSL by Robert Swiecki (Google), and
1809 independently by Hanno Böck.
1813 *) PKCS7 crash with missing EnvelopedContent
1815 The PKCS#7 parsing code does not handle missing inner EncryptedContent
1816 correctly. An attacker can craft malformed ASN.1-encoded PKCS#7 blobs
1817 with missing content and trigger a NULL pointer dereference on parsing.
1819 Applications that decrypt PKCS#7 data or otherwise parse PKCS#7
1820 structures from untrusted sources are affected. OpenSSL clients and
1821 servers are not affected.
1823 This issue was reported to OpenSSL by Michal Zalewski (Google).
1827 *) CMS verify infinite loop with unknown hash function
1829 When verifying a signedData message the CMS code can enter an infinite loop
1830 if presented with an unknown hash function OID. This can be used to perform
1831 denial of service against any system which verifies signedData messages using
1833 This issue was reported to OpenSSL by Johannes Bauer.
1837 *) Race condition handling NewSessionTicket
1839 If a NewSessionTicket is received by a multi-threaded client when attempting to
1840 reuse a previous ticket then a race condition can occur potentially leading to
1841 a double free of the ticket data.
1845 *) Only support 256-bit or stronger elliptic curves with the
1846 'ecdh_auto' setting (server) or by default (client). Of supported
1847 curves, prefer P-256 (both).
1850 Changes between 1.0.2 and 1.0.2a [19 Mar 2015]
1852 *) ClientHello sigalgs DoS fix
1854 If a client connects to an OpenSSL 1.0.2 server and renegotiates with an
1855 invalid signature algorithms extension a NULL pointer dereference will
1856 occur. This can be exploited in a DoS attack against the server.
1858 This issue was was reported to OpenSSL by David Ramos of Stanford
1861 [Stephen Henson and Matt Caswell]
1863 *) Multiblock corrupted pointer fix
1865 OpenSSL 1.0.2 introduced the "multiblock" performance improvement. This
1866 feature only applies on 64 bit x86 architecture platforms that support AES
1867 NI instructions. A defect in the implementation of "multiblock" can cause
1868 OpenSSL's internal write buffer to become incorrectly set to NULL when
1869 using non-blocking IO. Typically, when the user application is using a
1870 socket BIO for writing, this will only result in a failed connection.
1871 However if some other BIO is used then it is likely that a segmentation
1872 fault will be triggered, thus enabling a potential DoS attack.
1874 This issue was reported to OpenSSL by Daniel Danner and Rainer Mueller.
1878 *) Segmentation fault in DTLSv1_listen fix
1880 The DTLSv1_listen function is intended to be stateless and processes the
1881 initial ClientHello from many peers. It is common for user code to loop
1882 over the call to DTLSv1_listen until a valid ClientHello is received with
1883 an associated cookie. A defect in the implementation of DTLSv1_listen means
1884 that state is preserved in the SSL object from one invocation to the next
1885 that can lead to a segmentation fault. Errors processing the initial
1886 ClientHello can trigger this scenario. An example of such an error could be
1887 that a DTLS1.0 only client is attempting to connect to a DTLS1.2 only
1890 This issue was reported to OpenSSL by Per Allansson.
1894 *) Segmentation fault in ASN1_TYPE_cmp fix
1896 The function ASN1_TYPE_cmp will crash with an invalid read if an attempt is
1897 made to compare ASN.1 boolean types. Since ASN1_TYPE_cmp is used to check
1898 certificate signature algorithm consistency this can be used to crash any
1899 certificate verification operation and exploited in a DoS attack. Any
1900 application which performs certificate verification is vulnerable including
1901 OpenSSL clients and servers which enable client authentication.
1905 *) Segmentation fault for invalid PSS parameters fix
1907 The signature verification routines will crash with a NULL pointer
1908 dereference if presented with an ASN.1 signature using the RSA PSS
1909 algorithm and invalid parameters. Since these routines are used to verify
1910 certificate signature algorithms this can be used to crash any
1911 certificate verification operation and exploited in a DoS attack. Any
1912 application which performs certificate verification is vulnerable including
1913 OpenSSL clients and servers which enable client authentication.
1915 This issue was was reported to OpenSSL by Brian Carpenter.
1919 *) ASN.1 structure reuse memory corruption fix
1921 Reusing a structure in ASN.1 parsing may allow an attacker to cause
1922 memory corruption via an invalid write. Such reuse is and has been
1923 strongly discouraged and is believed to be rare.
1925 Applications that parse structures containing CHOICE or ANY DEFINED BY
1926 components may be affected. Certificate parsing (d2i_X509 and related
1927 functions) are however not affected. OpenSSL clients and servers are
1932 *) PKCS7 NULL pointer dereferences fix
1934 The PKCS#7 parsing code does not handle missing outer ContentInfo
1935 correctly. An attacker can craft malformed ASN.1-encoded PKCS#7 blobs with
1936 missing content and trigger a NULL pointer dereference on parsing.
1938 Applications that verify PKCS#7 signatures, decrypt PKCS#7 data or
1939 otherwise parse PKCS#7 structures from untrusted sources are
1940 affected. OpenSSL clients and servers are not affected.
1942 This issue was reported to OpenSSL by Michal Zalewski (Google).
1946 *) DoS via reachable assert in SSLv2 servers fix
1948 A malicious client can trigger an OPENSSL_assert (i.e., an abort) in
1949 servers that both support SSLv2 and enable export cipher suites by sending
1950 a specially crafted SSLv2 CLIENT-MASTER-KEY message.
1952 This issue was discovered by Sean Burford (Google) and Emilia Käsper
1953 (OpenSSL development team).
1957 *) Empty CKE with client auth and DHE fix
1959 If client auth is used then a server can seg fault in the event of a DHE
1960 ciphersuite being selected and a zero length ClientKeyExchange message
1961 being sent by the client. This could be exploited in a DoS attack.
1965 *) Handshake with unseeded PRNG fix
1967 Under certain conditions an OpenSSL 1.0.2 client can complete a handshake
1968 with an unseeded PRNG. The conditions are:
1969 - The client is on a platform where the PRNG has not been seeded
1970 automatically, and the user has not seeded manually
1971 - A protocol specific client method version has been used (i.e. not
1972 SSL_client_methodv23)
1973 - A ciphersuite is used that does not require additional random data from
1974 the PRNG beyond the initial ClientHello client random (e.g. PSK-RC4-SHA).
1976 If the handshake succeeds then the client random that has been used will
1977 have been generated from a PRNG with insufficient entropy and therefore the
1978 output may be predictable.
1980 For example using the following command with an unseeded openssl will
1981 succeed on an unpatched platform:
1983 openssl s_client -psk 1a2b3c4d -tls1_2 -cipher PSK-RC4-SHA
1987 *) Use After Free following d2i_ECPrivatekey error fix
1989 A malformed EC private key file consumed via the d2i_ECPrivateKey function
1990 could cause a use after free condition. This, in turn, could cause a double
1991 free in several private key parsing functions (such as d2i_PrivateKey
1992 or EVP_PKCS82PKEY) and could lead to a DoS attack or memory corruption
1993 for applications that receive EC private keys from untrusted
1994 sources. This scenario is considered rare.
1996 This issue was discovered by the BoringSSL project and fixed in their
2001 *) X509_to_X509_REQ NULL pointer deref fix
2003 The function X509_to_X509_REQ will crash with a NULL pointer dereference if
2004 the certificate key is invalid. This function is rarely used in practice.
2006 This issue was discovered by Brian Carpenter.
2010 *) Removed the export ciphers from the DEFAULT ciphers
2013 Changes between 1.0.1l and 1.0.2 [22 Jan 2015]
2015 *) Facilitate "universal" ARM builds targeting range of ARM ISAs, e.g.
2016 ARMv5 through ARMv8, as opposite to "locking" it to single one.
2017 So far those who have to target multiple platforms would compromise
2018 and argue that binary targeting say ARMv5 would still execute on
2019 ARMv8. "Universal" build resolves this compromise by providing
2020 near-optimal performance even on newer platforms.
2023 *) Accelerated NIST P-256 elliptic curve implementation for x86_64
2024 (other platforms pending).
2025 [Shay Gueron & Vlad Krasnov (Intel Corp), Andy Polyakov]
2027 *) Add support for the SignedCertificateTimestampList certificate and
2028 OCSP response extensions from RFC6962.
2031 *) Fix ec_GFp_simple_points_make_affine (thus, EC_POINTs_mul etc.)
2032 for corner cases. (Certain input points at infinity could lead to
2033 bogus results, with non-infinity inputs mapped to infinity too.)
2036 *) Initial support for PowerISA 2.0.7, first implemented in POWER8.
2037 This covers AES, SHA256/512 and GHASH. "Initial" means that most
2038 common cases are optimized and there still is room for further
2039 improvements. Vector Permutation AES for Altivec is also added.
2042 *) Add support for little-endian ppc64 Linux target.
2043 [Marcelo Cerri (IBM)]
2045 *) Initial support for AMRv8 ISA crypto extensions. This covers AES,
2046 SHA1, SHA256 and GHASH. "Initial" means that most common cases
2047 are optimized and there still is room for further improvements.
2048 Both 32- and 64-bit modes are supported.
2049 [Andy Polyakov, Ard Biesheuvel (Linaro)]
2051 *) Improved ARMv7 NEON support.
2054 *) Support for SPARC Architecture 2011 crypto extensions, first
2055 implemented in SPARC T4. This covers AES, DES, Camellia, SHA1,
2056 SHA256/512, MD5, GHASH and modular exponentiation.
2057 [Andy Polyakov, David Miller]
2059 *) Accelerated modular exponentiation for Intel processors, a.k.a.
2061 [Shay Gueron & Vlad Krasnov (Intel Corp)]
2063 *) Support for new and upcoming Intel processors, including AVX2,
2064 BMI and SHA ISA extensions. This includes additional "stitched"
2065 implementations, AESNI-SHA256 and GCM, and multi-buffer support
2068 This work was sponsored by Intel Corp.
2071 *) Support for DTLS 1.2. This adds two sets of DTLS methods: DTLS_*_method()
2072 supports both DTLS 1.2 and 1.0 and should use whatever version the peer
2073 supports and DTLSv1_2_*_method() which supports DTLS 1.2 only.
2076 *) Use algorithm specific chains in SSL_CTX_use_certificate_chain_file():
2077 this fixes a limitation in previous versions of OpenSSL.
2080 *) Extended RSA OAEP support via EVP_PKEY API. Options to specify digest,
2081 MGF1 digest and OAEP label.
2084 *) Add EVP support for key wrapping algorithms, to avoid problems with
2085 existing code the flag EVP_CIPHER_CTX_WRAP_ALLOW has to be set in
2086 the EVP_CIPHER_CTX or an error is returned. Add AES and DES3 wrap
2087 algorithms and include tests cases.
2090 *) Add functions to allocate and set the fields of an ECDSA_METHOD
2092 [Douglas E. Engert, Steve Henson]
2094 *) New functions OPENSSL_gmtime_diff and ASN1_TIME_diff to find the
2095 difference in days and seconds between two tm or ASN1_TIME structures.
2098 *) Add -rev test option to s_server to just reverse order of characters
2099 received by client and send back to server. Also prints an abbreviated
2100 summary of the connection parameters.
2103 *) New option -brief for s_client and s_server to print out a brief summary
2104 of connection parameters.
2107 *) Add callbacks for arbitrary TLS extensions.
2108 [Trevor Perrin <trevp@trevp.net> and Ben Laurie]
2110 *) New option -crl_download in several openssl utilities to download CRLs
2111 from CRLDP extension in certificates.
2114 *) New options -CRL and -CRLform for s_client and s_server for CRLs.
2117 *) New function X509_CRL_diff to generate a delta CRL from the difference
2118 of two full CRLs. Add support to "crl" utility.
2121 *) New functions to set lookup_crls function and to retrieve
2122 X509_STORE from X509_STORE_CTX.
2125 *) Print out deprecated issuer and subject unique ID fields in
2129 *) Extend OCSP I/O functions so they can be used for simple general purpose
2130 HTTP as well as OCSP. New wrapper function which can be used to download
2131 CRLs using the OCSP API.
2134 *) Delegate command line handling in s_client/s_server to SSL_CONF APIs.
2137 *) SSL_CONF* functions. These provide a common framework for application
2138 configuration using configuration files or command lines.
2141 *) SSL/TLS tracing code. This parses out SSL/TLS records using the
2142 message callback and prints the results. Needs compile time option
2143 "enable-ssl-trace". New options to s_client and s_server to enable
2147 *) New ctrl and macro to retrieve supported points extensions.
2148 Print out extension in s_server and s_client.
2151 *) New functions to retrieve certificate signature and signature
2155 *) Add functions to retrieve and manipulate the raw cipherlist sent by a
2159 *) New Suite B modes for TLS code. These use and enforce the requirements
2160 of RFC6460: restrict ciphersuites, only permit Suite B algorithms and
2161 only use Suite B curves. The Suite B modes can be set by using the
2162 strings "SUITEB128", "SUITEB192" or "SUITEB128ONLY" for the cipherstring.
2165 *) New chain verification flags for Suite B levels of security. Check
2166 algorithms are acceptable when flags are set in X509_verify_cert.
2169 *) Make tls1_check_chain return a set of flags indicating checks passed
2170 by a certificate chain. Add additional tests to handle client
2171 certificates: checks for matching certificate type and issuer name
2175 *) If an attempt is made to use a signature algorithm not in the peer
2176 preference list abort the handshake. If client has no suitable
2177 signature algorithms in response to a certificate request do not
2178 use the certificate.
2181 *) If server EC tmp key is not in client preference list abort handshake.
2184 *) Add support for certificate stores in CERT structure. This makes it
2185 possible to have different stores per SSL structure or one store in
2186 the parent SSL_CTX. Include distinct stores for certificate chain
2187 verification and chain building. New ctrl SSL_CTRL_BUILD_CERT_CHAIN
2188 to build and store a certificate chain in CERT structure: returning
2189 an error if the chain cannot be built: this will allow applications
2190 to test if a chain is correctly configured.
2192 Note: if the CERT based stores are not set then the parent SSL_CTX
2193 store is used to retain compatibility with existing behaviour.
2197 *) New function ssl_set_client_disabled to set a ciphersuite disabled
2198 mask based on the current session, check mask when sending client
2199 hello and checking the requested ciphersuite.
2202 *) New ctrls to retrieve and set certificate types in a certificate
2203 request message. Print out received values in s_client. If certificate
2204 types is not set with custom values set sensible values based on
2205 supported signature algorithms.
2208 *) Support for distinct client and server supported signature algorithms.
2211 *) Add certificate callback. If set this is called whenever a certificate
2212 is required by client or server. An application can decide which
2213 certificate chain to present based on arbitrary criteria: for example
2214 supported signature algorithms. Add very simple example to s_server.
2215 This fixes many of the problems and restrictions of the existing client
2216 certificate callback: for example you can now clear an existing
2217 certificate and specify the whole chain.
2220 *) Add new "valid_flags" field to CERT_PKEY structure which determines what
2221 the certificate can be used for (if anything). Set valid_flags field
2222 in new tls1_check_chain function. Simplify ssl_set_cert_masks which used
2223 to have similar checks in it.
2225 Add new "cert_flags" field to CERT structure and include a "strict mode".
2226 This enforces some TLS certificate requirements (such as only permitting
2227 certificate signature algorithms contained in the supported algorithms
2228 extension) which some implementations ignore: this option should be used
2229 with caution as it could cause interoperability issues.
2232 *) Update and tidy signature algorithm extension processing. Work out
2233 shared signature algorithms based on preferences and peer algorithms
2234 and print them out in s_client and s_server. Abort handshake if no
2235 shared signature algorithms.
2238 *) Add new functions to allow customised supported signature algorithms
2239 for SSL and SSL_CTX structures. Add options to s_client and s_server
2243 *) New function SSL_certs_clear() to delete all references to certificates
2244 from an SSL structure. Before this once a certificate had been added
2245 it couldn't be removed.
2248 *) Integrate hostname, email address and IP address checking with certificate
2249 verification. New verify options supporting checking in openssl utility.
2252 *) Fixes and wildcard matching support to hostname and email checking
2253 functions. Add manual page.
2254 [Florian Weimer (Red Hat Product Security Team)]
2256 *) New functions to check a hostname email or IP address against a
2257 certificate. Add options x509 utility to print results of checks against
2261 *) Fix OCSP checking.
2262 [Rob Stradling <rob.stradling@comodo.com> and Ben Laurie]
2264 *) Initial experimental support for explicitly trusted non-root CAs.
2265 OpenSSL still tries to build a complete chain to a root but if an
2266 intermediate CA has a trust setting included that is used. The first
2267 setting is used: whether to trust (e.g., -addtrust option to the x509
2271 *) Add -trusted_first option which attempts to find certificates in the
2272 trusted store even if an untrusted chain is also supplied.
2275 *) MIPS assembly pack updates: support for MIPS32r2 and SmartMIPS ASE,
2276 platform support for Linux and Android.
2279 *) Support for linux-x32, ILP32 environment in x86_64 framework.
2282 *) Experimental multi-implementation support for FIPS capable OpenSSL.
2283 When in FIPS mode the approved implementations are used as normal,
2284 when not in FIPS mode the internal unapproved versions are used instead.
2285 This means that the FIPS capable OpenSSL isn't forced to use the
2286 (often lower performance) FIPS implementations outside FIPS mode.
2289 *) Transparently support X9.42 DH parameters when calling
2290 PEM_read_bio_DHparameters. This means existing applications can handle
2291 the new parameter format automatically.
2294 *) Initial experimental support for X9.42 DH parameter format: mainly
2295 to support use of 'q' parameter for RFC5114 parameters.
2298 *) Add DH parameters from RFC5114 including test data to dhtest.
2301 *) Support for automatic EC temporary key parameter selection. If enabled
2302 the most preferred EC parameters are automatically used instead of
2303 hardcoded fixed parameters. Now a server just has to call:
2304 SSL_CTX_set_ecdh_auto(ctx, 1) and the server will automatically
2305 support ECDH and use the most appropriate parameters.
2308 *) Enhance and tidy EC curve and point format TLS extension code. Use
2309 static structures instead of allocation if default values are used.
2310 New ctrls to set curves we wish to support and to retrieve shared curves.
2311 Print out shared curves in s_server. New options to s_server and s_client
2312 to set list of supported curves.
2315 *) New ctrls to retrieve supported signature algorithms and
2316 supported curve values as an array of NIDs. Extend openssl utility
2317 to print out received values.
2320 *) Add new APIs EC_curve_nist2nid and EC_curve_nid2nist which convert
2321 between NIDs and the more common NIST names such as "P-256". Enhance
2322 ecparam utility and ECC method to recognise the NIST names for curves.
2325 *) Enhance SSL/TLS certificate chain handling to support different
2326 chains for each certificate instead of one chain in the parent SSL_CTX.
2329 *) Support for fixed DH ciphersuite client authentication: where both
2330 server and client use DH certificates with common parameters.
2333 *) Support for fixed DH ciphersuites: those requiring DH server
2337 *) New function i2d_re_X509_tbs for re-encoding the TBS portion of
2339 Note: Related 1.0.2-beta specific macros X509_get_cert_info,
2340 X509_CINF_set_modified, X509_CINF_get_issuer, X509_CINF_get_extensions and
2341 X509_CINF_get_signature were reverted post internal team review.
2343 Changes between 1.0.1k and 1.0.1l [15 Jan 2015]
2345 *) Build fixes for the Windows and OpenVMS platforms
2346 [Matt Caswell and Richard Levitte]
2348 Changes between 1.0.1j and 1.0.1k [8 Jan 2015]
2350 *) Fix DTLS segmentation fault in dtls1_get_record. A carefully crafted DTLS
2351 message can cause a segmentation fault in OpenSSL due to a NULL pointer
2352 dereference. This could lead to a Denial Of Service attack. Thanks to
2353 Markus Stenberg of Cisco Systems, Inc. for reporting this issue.
2357 *) Fix DTLS memory leak in dtls1_buffer_record. A memory leak can occur in the
2358 dtls1_buffer_record function under certain conditions. In particular this
2359 could occur if an attacker sent repeated DTLS records with the same
2360 sequence number but for the next epoch. The memory leak could be exploited
2361 by an attacker in a Denial of Service attack through memory exhaustion.
2362 Thanks to Chris Mueller for reporting this issue.
2366 *) Fix issue where no-ssl3 configuration sets method to NULL. When openssl is
2367 built with the no-ssl3 option and a SSL v3 ClientHello is received the ssl
2368 method would be set to NULL which could later result in a NULL pointer
2369 dereference. Thanks to Frank Schmirler for reporting this issue.
2373 *) Abort handshake if server key exchange message is omitted for ephemeral
2376 Thanks to Karthikeyan Bhargavan of the PROSECCO team at INRIA for
2377 reporting this issue.
2381 *) Remove non-export ephemeral RSA code on client and server. This code
2382 violated the TLS standard by allowing the use of temporary RSA keys in
2383 non-export ciphersuites and could be used by a server to effectively
2384 downgrade the RSA key length used to a value smaller than the server
2385 certificate. Thanks for Karthikeyan Bhargavan of the PROSECCO team at
2386 INRIA or reporting this issue.
2390 *) Fixed issue where DH client certificates are accepted without verification.
2391 An OpenSSL server will accept a DH certificate for client authentication
2392 without the certificate verify message. This effectively allows a client to
2393 authenticate without the use of a private key. This only affects servers
2394 which trust a client certificate authority which issues certificates
2395 containing DH keys: these are extremely rare and hardly ever encountered.
2396 Thanks for Karthikeyan Bhargavan of the PROSECCO team at INRIA or reporting
2401 *) Ensure that the session ID context of an SSL is updated when its
2402 SSL_CTX is updated via SSL_set_SSL_CTX.
2404 The session ID context is typically set from the parent SSL_CTX,
2405 and can vary with the CTX.
2408 *) Fix various certificate fingerprint issues.
2410 By using non-DER or invalid encodings outside the signed portion of a
2411 certificate the fingerprint can be changed without breaking the signature.
2412 Although no details of the signed portion of the certificate can be changed
2413 this can cause problems with some applications: e.g. those using the
2414 certificate fingerprint for blacklists.
2416 1. Reject signatures with non zero unused bits.
2418 If the BIT STRING containing the signature has non zero unused bits reject
2419 the signature. All current signature algorithms require zero unused bits.
2421 2. Check certificate algorithm consistency.
2423 Check the AlgorithmIdentifier inside TBS matches the one in the
2424 certificate signature. NB: this will result in signature failure
2425 errors for some broken certificates.
2427 Thanks to Konrad Kraszewski from Google for reporting this issue.
2429 3. Check DSA/ECDSA signatures use DER.
2431 Re-encode DSA/ECDSA signatures and compare with the original received
2432 signature. Return an error if there is a mismatch.
2434 This will reject various cases including garbage after signature
2435 (thanks to Antti Karjalainen and Tuomo Untinen from the Codenomicon CROSS
2436 program for discovering this case) and use of BER or invalid ASN.1 INTEGERs
2437 (negative or with leading zeroes).
2439 Further analysis was conducted and fixes were developed by Stephen Henson
2440 of the OpenSSL core team.
2445 *) Correct Bignum squaring. Bignum squaring (BN_sqr) may produce incorrect
2446 results on some platforms, including x86_64. This bug occurs at random
2447 with a very low probability, and is not known to be exploitable in any
2448 way, though its exact impact is difficult to determine. Thanks to Pieter
2449 Wuille (Blockstream) who reported this issue and also suggested an initial
2450 fix. Further analysis was conducted by the OpenSSL development team and
2451 Adam Langley of Google. The final fix was developed by Andy Polyakov of
2452 the OpenSSL core team.
2456 *) Do not resume sessions on the server if the negotiated protocol
2457 version does not match the session's version. Resuming with a different
2458 version, while not strictly forbidden by the RFC, is of questionable
2459 sanity and breaks all known clients.
2460 [David Benjamin, Emilia Käsper]
2462 *) Tighten handling of the ChangeCipherSpec (CCS) message: reject
2463 early CCS messages during renegotiation. (Note that because
2464 renegotiation is encrypted, this early CCS was not exploitable.)
2467 *) Tighten client-side session ticket handling during renegotiation:
2468 ensure that the client only accepts a session ticket if the server sends
2469 the extension anew in the ServerHello. Previously, a TLS client would
2470 reuse the old extension state and thus accept a session ticket if one was
2471 announced in the initial ServerHello.
2473 Similarly, ensure that the client requires a session ticket if one
2474 was advertised in the ServerHello. Previously, a TLS client would
2475 ignore a missing NewSessionTicket message.
2478 Changes between 1.0.1i and 1.0.1j [15 Oct 2014]
2480 *) SRTP Memory Leak.
2482 A flaw in the DTLS SRTP extension parsing code allows an attacker, who
2483 sends a carefully crafted handshake message, to cause OpenSSL to fail
2484 to free up to 64k of memory causing a memory leak. This could be
2485 exploited in a Denial Of Service attack. This issue affects OpenSSL
2486 1.0.1 server implementations for both SSL/TLS and DTLS regardless of
2487 whether SRTP is used or configured. Implementations of OpenSSL that
2488 have been compiled with OPENSSL_NO_SRTP defined are not affected.
2490 The fix was developed by the OpenSSL team.
2494 *) Session Ticket Memory Leak.
2496 When an OpenSSL SSL/TLS/DTLS server receives a session ticket the
2497 integrity of that ticket is first verified. In the event of a session
2498 ticket integrity check failing, OpenSSL will fail to free memory
2499 causing a memory leak. By sending a large number of invalid session
2500 tickets an attacker could exploit this issue in a Denial Of Service
2505 *) Build option no-ssl3 is incomplete.
2507 When OpenSSL is configured with "no-ssl3" as a build option, servers
2508 could accept and complete a SSL 3.0 handshake, and clients could be
2509 configured to send them.
2511 [Akamai and the OpenSSL team]
2513 *) Add support for TLS_FALLBACK_SCSV.
2514 Client applications doing fallback retries should call
2515 SSL_set_mode(s, SSL_MODE_SEND_FALLBACK_SCSV).
2517 [Adam Langley, Bodo Moeller]
2519 *) Add additional DigestInfo checks.
2521 Re-encode DigestInto in DER and check against the original when
2522 verifying RSA signature: this will reject any improperly encoded
2523 DigestInfo structures.
2525 Note: this is a precautionary measure and no attacks are currently known.
2529 Changes between 1.0.1h and 1.0.1i [6 Aug 2014]
2531 *) Fix SRP buffer overrun vulnerability. Invalid parameters passed to the
2532 SRP code can be overrun an internal buffer. Add sanity check that
2533 g, A, B < N to SRP code.
2535 Thanks to Sean Devlin and Watson Ladd of Cryptography Services, NCC
2536 Group for discovering this issue.
2540 *) A flaw in the OpenSSL SSL/TLS server code causes the server to negotiate
2541 TLS 1.0 instead of higher protocol versions when the ClientHello message
2542 is badly fragmented. This allows a man-in-the-middle attacker to force a
2543 downgrade to TLS 1.0 even if both the server and the client support a
2544 higher protocol version, by modifying the client's TLS records.
2546 Thanks to David Benjamin and Adam Langley (Google) for discovering and
2547 researching this issue.
2551 *) OpenSSL DTLS clients enabling anonymous (EC)DH ciphersuites are subject
2552 to a denial of service attack. A malicious server can crash the client
2553 with a null pointer dereference (read) by specifying an anonymous (EC)DH
2554 ciphersuite and sending carefully crafted handshake messages.
2556 Thanks to Felix Gröbert (Google) for discovering and researching this
2561 *) By sending carefully crafted DTLS packets an attacker could cause openssl
2562 to leak memory. This can be exploited through a Denial of Service attack.
2563 Thanks to Adam Langley for discovering and researching this issue.
2567 *) An attacker can force openssl to consume large amounts of memory whilst
2568 processing DTLS handshake messages. This can be exploited through a
2569 Denial of Service attack.
2570 Thanks to Adam Langley for discovering and researching this issue.
2574 *) An attacker can force an error condition which causes openssl to crash
2575 whilst processing DTLS packets due to memory being freed twice. This
2576 can be exploited through a Denial of Service attack.
2577 Thanks to Adam Langley and Wan-Teh Chang for discovering and researching
2582 *) If a multithreaded client connects to a malicious server using a resumed
2583 session and the server sends an ec point format extension it could write
2584 up to 255 bytes to freed memory.
2586 Thanks to Gabor Tyukasz (LogMeIn Inc) for discovering and researching this
2591 *) A malicious server can crash an OpenSSL client with a null pointer
2592 dereference (read) by specifying an SRP ciphersuite even though it was not
2593 properly negotiated with the client. This can be exploited through a
2594 Denial of Service attack.
2596 Thanks to Joonas Kuorilehto and Riku Hietamäki (Codenomicon) for
2597 discovering and researching this issue.
2601 *) A flaw in OBJ_obj2txt may cause pretty printing functions such as
2602 X509_name_oneline, X509_name_print_ex et al. to leak some information
2603 from the stack. Applications may be affected if they echo pretty printing
2604 output to the attacker.
2606 Thanks to Ivan Fratric (Google) for discovering this issue.
2608 [Emilia Käsper, and Steve Henson]
2610 *) Fix ec_GFp_simple_points_make_affine (thus, EC_POINTs_mul etc.)
2611 for corner cases. (Certain input points at infinity could lead to
2612 bogus results, with non-infinity inputs mapped to infinity too.)
2615 Changes between 1.0.1g and 1.0.1h [5 Jun 2014]
2617 *) Fix for SSL/TLS MITM flaw. An attacker using a carefully crafted
2618 handshake can force the use of weak keying material in OpenSSL
2619 SSL/TLS clients and servers.
2621 Thanks to KIKUCHI Masashi (Lepidum Co. Ltd.) for discovering and
2622 researching this issue. (CVE-2014-0224)
2623 [KIKUCHI Masashi, Steve Henson]
2625 *) Fix DTLS recursion flaw. By sending an invalid DTLS handshake to an
2626 OpenSSL DTLS client the code can be made to recurse eventually crashing
2629 Thanks to Imre Rad (Search-Lab Ltd.) for discovering this issue.
2631 [Imre Rad, Steve Henson]
2633 *) Fix DTLS invalid fragment vulnerability. A buffer overrun attack can
2634 be triggered by sending invalid DTLS fragments to an OpenSSL DTLS
2635 client or server. This is potentially exploitable to run arbitrary
2636 code on a vulnerable client or server.
2638 Thanks to Jüri Aedla for reporting this issue. (CVE-2014-0195)
2639 [Jüri Aedla, Steve Henson]
2641 *) Fix bug in TLS code where clients enable anonymous ECDH ciphersuites
2642 are subject to a denial of service attack.
2644 Thanks to Felix Gröbert and Ivan Fratric at Google for discovering
2645 this issue. (CVE-2014-3470)
2646 [Felix Gröbert, Ivan Fratric, Steve Henson]
2648 *) Harmonize version and its documentation. -f flag is used to display
2650 [mancha <mancha1@zoho.com>]
2652 *) Fix eckey_priv_encode so it immediately returns an error upon a failure
2653 in i2d_ECPrivateKey.
2654 [mancha <mancha1@zoho.com>]
2656 *) Fix some double frees. These are not thought to be exploitable.
2657 [mancha <mancha1@zoho.com>]
2659 Changes between 1.0.1f and 1.0.1g [7 Apr 2014]
2661 *) A missing bounds check in the handling of the TLS heartbeat extension
2662 can be used to reveal up to 64k of memory to a connected client or
2665 Thanks for Neel Mehta of Google Security for discovering this bug and to
2666 Adam Langley <agl@chromium.org> and Bodo Moeller <bmoeller@acm.org> for
2667 preparing the fix (CVE-2014-0160)
2668 [Adam Langley, Bodo Moeller]
2670 *) Fix for the attack described in the paper "Recovering OpenSSL
2671 ECDSA Nonces Using the FLUSH+RELOAD Cache Side-channel Attack"
2672 by Yuval Yarom and Naomi Benger. Details can be obtained from:
2673 http://eprint.iacr.org/2014/140
2675 Thanks to Yuval Yarom and Naomi Benger for discovering this
2676 flaw and to Yuval Yarom for supplying a fix (CVE-2014-0076)
2677 [Yuval Yarom and Naomi Benger]
2679 *) TLS pad extension: draft-agl-tls-padding-03
2681 Workaround for the "TLS hang bug" (see FAQ and PR#2771): if the
2682 TLS client Hello record length value would otherwise be > 255 and
2683 less that 512 pad with a dummy extension containing zeroes so it
2684 is at least 512 bytes long.
2686 [Adam Langley, Steve Henson]
2688 Changes between 1.0.1e and 1.0.1f [6 Jan 2014]
2690 *) Fix for TLS record tampering bug. A carefully crafted invalid
2691 handshake could crash OpenSSL with a NULL pointer exception.
2692 Thanks to Anton Johansson for reporting this issues.
2695 *) Keep original DTLS digest and encryption contexts in retransmission
2696 structures so we can use the previous session parameters if they need
2697 to be resent. (CVE-2013-6450)
2700 *) Add option SSL_OP_SAFARI_ECDHE_ECDSA_BUG (part of SSL_OP_ALL) which
2701 avoids preferring ECDHE-ECDSA ciphers when the client appears to be
2702 Safari on OS X. Safari on OS X 10.8..10.8.3 advertises support for
2703 several ECDHE-ECDSA ciphers, but fails to negotiate them. The bug
2704 is fixed in OS X 10.8.4, but Apple have ruled out both hot fixing
2705 10.8..10.8.3 and forcing users to upgrade to 10.8.4 or newer.
2706 [Rob Stradling, Adam Langley]
2708 Changes between 1.0.1d and 1.0.1e [11 Feb 2013]
2710 *) Correct fix for CVE-2013-0169. The original didn't work on AES-NI
2711 supporting platforms or when small records were transferred.
2712 [Andy Polyakov, Steve Henson]
2714 Changes between 1.0.1c and 1.0.1d [5 Feb 2013]
2716 *) Make the decoding of SSLv3, TLS and DTLS CBC records constant time.
2718 This addresses the flaw in CBC record processing discovered by
2719 Nadhem Alfardan and Kenny Paterson. Details of this attack can be found
2720 at: http://www.isg.rhul.ac.uk/tls/
2722 Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
2723 Security Group at Royal Holloway, University of London
2724 (www.isg.rhul.ac.uk) for discovering this flaw and Adam Langley and
2725 Emilia Käsper for the initial patch.
2727 [Emilia Käsper, Adam Langley, Ben Laurie, Andy Polyakov, Steve Henson]
2729 *) Fix flaw in AESNI handling of TLS 1.2 and 1.1 records for CBC mode
2730 ciphersuites which can be exploited in a denial of service attack.
2731 Thanks go to and to Adam Langley <agl@chromium.org> for discovering
2732 and detecting this bug and to Wolfgang Ettlinger
2733 <wolfgang.ettlinger@gmail.com> for independently discovering this issue.
2737 *) Return an error when checking OCSP signatures when key is NULL.
2738 This fixes a DoS attack. (CVE-2013-0166)
2741 *) Make openssl verify return errors.
2742 [Chris Palmer <palmer@google.com> and Ben Laurie]
2744 *) Call OCSP Stapling callback after ciphersuite has been chosen, so
2745 the right response is stapled. Also change SSL_get_certificate()
2746 so it returns the certificate actually sent.
2747 See http://rt.openssl.org/Ticket/Display.html?id=2836.
2748 [Rob Stradling <rob.stradling@comodo.com>]
2750 *) Fix possible deadlock when decoding public keys.
2753 *) Don't use TLS 1.0 record version number in initial client hello
2757 Changes between 1.0.1b and 1.0.1c [10 May 2012]
2759 *) Sanity check record length before skipping explicit IV in TLS
2760 1.2, 1.1 and DTLS to fix DoS attack.
2762 Thanks to Codenomicon for discovering this issue using Fuzz-o-Matic
2763 fuzzing as a service testing platform.
2767 *) Initialise tkeylen properly when encrypting CMS messages.
2768 Thanks to Solar Designer of Openwall for reporting this issue.
2771 *) In FIPS mode don't try to use composite ciphers as they are not
2775 Changes between 1.0.1a and 1.0.1b [26 Apr 2012]
2777 *) OpenSSL 1.0.0 sets SSL_OP_ALL to 0x80000FFFL and OpenSSL 1.0.1 and
2778 1.0.1a set SSL_OP_NO_TLSv1_1 to 0x00000400L which would unfortunately
2779 mean any application compiled against OpenSSL 1.0.0 headers setting
2780 SSL_OP_ALL would also set SSL_OP_NO_TLSv1_1, unintentionally disablng
2781 TLS 1.1 also. Fix this by changing the value of SSL_OP_NO_TLSv1_1 to
2782 0x10000000L Any application which was previously compiled against
2783 OpenSSL 1.0.1 or 1.0.1a headers and which cares about SSL_OP_NO_TLSv1_1
2784 will need to be recompiled as a result. Letting be results in
2785 inability to disable specifically TLS 1.1 and in client context,
2786 in unlike event, limit maximum offered version to TLS 1.0 [see below].
2789 *) In order to ensure interoperabilty SSL_OP_NO_protocolX does not
2790 disable just protocol X, but all protocols above X *if* there are
2791 protocols *below* X still enabled. In more practical terms it means
2792 that if application wants to disable TLS1.0 in favor of TLS1.1 and
2793 above, it's not sufficient to pass SSL_OP_NO_TLSv1, one has to pass
2794 SSL_OP_NO_TLSv1|SSL_OP_NO_SSLv3|SSL_OP_NO_SSLv2. This applies to
2798 Changes between 1.0.1 and 1.0.1a [19 Apr 2012]
2800 *) Check for potentially exploitable overflows in asn1_d2i_read_bio
2801 BUF_mem_grow and BUF_mem_grow_clean. Refuse attempts to shrink buffer
2802 in CRYPTO_realloc_clean.
2804 Thanks to Tavis Ormandy, Google Security Team, for discovering this
2805 issue and to Adam Langley <agl@chromium.org> for fixing it.
2807 [Adam Langley (Google), Tavis Ormandy, Google Security Team]
2809 *) Don't allow TLS 1.2 SHA-256 ciphersuites in TLS 1.0, 1.1 connections.
2812 *) Workarounds for some broken servers that "hang" if a client hello
2813 record length exceeds 255 bytes.
2815 1. Do not use record version number > TLS 1.0 in initial client
2816 hello: some (but not all) hanging servers will now work.
2817 2. If we set OPENSSL_MAX_TLS1_2_CIPHER_LENGTH this will truncate
2818 the number of ciphers sent in the client hello. This should be
2819 set to an even number, such as 50, for example by passing:
2820 -DOPENSSL_MAX_TLS1_2_CIPHER_LENGTH=50 to config or Configure.
2821 Most broken servers should now work.
2822 3. If all else fails setting OPENSSL_NO_TLS1_2_CLIENT will disable
2823 TLS 1.2 client support entirely.
2826 *) Fix SEGV in Vector Permutation AES module observed in OpenSSH.
2829 Changes between 1.0.0h and 1.0.1 [14 Mar 2012]
2831 *) Add compatibility with old MDC2 signatures which use an ASN1 OCTET
2832 STRING form instead of a DigestInfo.
2835 *) The format used for MDC2 RSA signatures is inconsistent between EVP
2836 and the RSA_sign/RSA_verify functions. This was made more apparent when
2837 OpenSSL used RSA_sign/RSA_verify for some RSA signatures in particular
2838 those which went through EVP_PKEY_METHOD in 1.0.0 and later. Detect
2839 the correct format in RSA_verify so both forms transparently work.
2842 *) Some servers which support TLS 1.0 can choke if we initially indicate
2843 support for TLS 1.2 and later renegotiate using TLS 1.0 in the RSA
2844 encrypted premaster secret. As a workaround use the maximum permitted
2845 client version in client hello, this should keep such servers happy
2846 and still work with previous versions of OpenSSL.
2849 *) Add support for TLS/DTLS heartbeats.
2850 [Robin Seggelmann <seggelmann@fh-muenster.de>]
2852 *) Add support for SCTP.
2853 [Robin Seggelmann <seggelmann@fh-muenster.de>]
2855 *) Improved PRNG seeding for VOS.
2856 [Paul Green <Paul.Green@stratus.com>]
2858 *) Extensive assembler packs updates, most notably:
2860 - x86[_64]: AES-NI, PCLMULQDQ, RDRAND support;
2861 - x86[_64]: SSSE3 support (SHA1, vector-permutation AES);
2862 - x86_64: bit-sliced AES implementation;
2863 - ARM: NEON support, contemporary platforms optimizations;
2864 - s390x: z196 support;
2865 - *: GHASH and GF(2^m) multiplication implementations;
2869 *) Make TLS-SRP code conformant with RFC 5054 API cleanup
2870 (removal of unnecessary code)
2871 [Peter Sylvester <peter.sylvester@edelweb.fr>]
2873 *) Add TLS key material exporter from RFC 5705.
2876 *) Add DTLS-SRTP negotiation from RFC 5764.
2879 *) Add Next Protocol Negotiation,
2880 http://tools.ietf.org/html/draft-agl-tls-nextprotoneg-00. Can be
2881 disabled with a no-npn flag to config or Configure. Code donated
2883 [Adam Langley <agl@google.com> and Ben Laurie]
2885 *) Add optional 64-bit optimized implementations of elliptic curves NIST-P224,
2886 NIST-P256, NIST-P521, with constant-time single point multiplication on
2887 typical inputs. Compiler support for the nonstandard type __uint128_t is
2888 required to use this (present in gcc 4.4 and later, for 64-bit builds).
2889 Code made available under Apache License version 2.0.
2891 Specify "enable-ec_nistp_64_gcc_128" on the Configure (or config) command
2892 line to include this in your build of OpenSSL, and run "make depend" (or
2893 "make update"). This enables the following EC_METHODs:
2895 EC_GFp_nistp224_method()
2896 EC_GFp_nistp256_method()
2897 EC_GFp_nistp521_method()
2899 EC_GROUP_new_by_curve_name() will automatically use these (while
2900 EC_GROUP_new_curve_GFp() currently prefers the more flexible
2902 [Emilia Käsper, Adam Langley, Bodo Moeller (Google)]
2904 *) Use type ossl_ssize_t instad of ssize_t which isn't available on
2905 all platforms. Move ssize_t definition from e_os.h to the public
2906 header file e_os2.h as it now appears in public header file cms.h
2909 *) New -sigopt option to the ca, req and x509 utilities. Additional
2910 signature parameters can be passed using this option and in
2914 *) Add RSA PSS signing function. This will generate and set the
2915 appropriate AlgorithmIdentifiers for PSS based on those in the
2916 corresponding EVP_MD_CTX structure. No application support yet.
2919 *) Support for companion algorithm specific ASN1 signing routines.
2920 New function ASN1_item_sign_ctx() signs a pre-initialised
2921 EVP_MD_CTX structure and sets AlgorithmIdentifiers based on
2922 the appropriate parameters.
2925 *) Add new algorithm specific ASN1 verification initialisation function
2926 to EVP_PKEY_ASN1_METHOD: this is not in EVP_PKEY_METHOD since the ASN1
2927 handling will be the same no matter what EVP_PKEY_METHOD is used.
2928 Add a PSS handler to support verification of PSS signatures: checked
2929 against a number of sample certificates.
2932 *) Add signature printing for PSS. Add PSS OIDs.
2933 [Steve Henson, Martin Kaiser <lists@kaiser.cx>]
2935 *) Add algorithm specific signature printing. An individual ASN1 method
2936 can now print out signatures instead of the standard hex dump.
2938 More complex signatures (e.g. PSS) can print out more meaningful
2939 information. Include DSA version that prints out the signature
2943 *) Password based recipient info support for CMS library: implementing
2947 *) Split password based encryption into PBES2 and PBKDF2 functions. This
2948 neatly separates the code into cipher and PBE sections and is required
2949 for some algorithms that split PBES2 into separate pieces (such as
2950 password based CMS).
2953 *) Session-handling fixes:
2954 - Fix handling of connections that are resuming with a session ID,
2955 but also support Session Tickets.
2956 - Fix a bug that suppressed issuing of a new ticket if the client
2957 presented a ticket with an expired session.
2958 - Try to set the ticket lifetime hint to something reasonable.
2959 - Make tickets shorter by excluding irrelevant information.
2960 - On the client side, don't ignore renewed tickets.
2961 [Adam Langley, Bodo Moeller (Google)]
2963 *) Fix PSK session representation.
2966 *) Add RC4-MD5 and AESNI-SHA1 "stitched" implementations.
2968 This work was sponsored by Intel.
2971 *) Add GCM support to TLS library. Some custom code is needed to split
2972 the IV between the fixed (from PRF) and explicit (from TLS record)
2973 portions. This adds all GCM ciphersuites supported by RFC5288 and
2974 RFC5289. Generalise some AES* cipherstrings to include GCM and
2975 add a special AESGCM string for GCM only.
2978 *) Expand range of ctrls for AES GCM. Permit setting invocation
2979 field on decrypt and retrieval of invocation field only on encrypt.
2982 *) Add HMAC ECC ciphersuites from RFC5289. Include SHA384 PRF support.
2983 As required by RFC5289 these ciphersuites cannot be used if for
2984 versions of TLS earlier than 1.2.
2987 *) For FIPS capable OpenSSL interpret a NULL default public key method
2988 as unset and return the appropriate default but do *not* set the default.
2989 This means we can return the appropriate method in applications that
2990 switch between FIPS and non-FIPS modes.
2993 *) Redirect HMAC and CMAC operations to FIPS module in FIPS mode. If an
2994 ENGINE is used then we cannot handle that in the FIPS module so we
2995 keep original code iff non-FIPS operations are allowed.
2998 *) Add -attime option to openssl utilities.
2999 [Peter Eckersley <pde@eff.org>, Ben Laurie and Steve Henson]
3001 *) Redirect DSA and DH operations to FIPS module in FIPS mode.
3004 *) Redirect ECDSA and ECDH operations to FIPS module in FIPS mode. Also use
3005 FIPS EC methods unconditionally for now.
3008 *) New build option no-ec2m to disable characteristic 2 code.
3011 *) Backport libcrypto audit of return value checking from 1.1.0-dev; not
3012 all cases can be covered as some introduce binary incompatibilities.
3015 *) Redirect RSA operations to FIPS module including keygen,
3016 encrypt, decrypt, sign and verify. Block use of non FIPS RSA methods.
3019 *) Add similar low level API blocking to ciphers.
3022 *) Low level digest APIs are not approved in FIPS mode: any attempt
3023 to use these will cause a fatal error. Applications that *really* want
3024 to use them can use the private_* version instead.
3027 *) Redirect cipher operations to FIPS module for FIPS builds.
3030 *) Redirect digest operations to FIPS module for FIPS builds.
3033 *) Update build system to add "fips" flag which will link in fipscanister.o
3034 for static and shared library builds embedding a signature if needed.
3037 *) Output TLS supported curves in preference order instead of numerical
3038 order. This is currently hardcoded for the highest order curves first.
3039 This should be configurable so applications can judge speed vs strength.
3042 *) Add TLS v1.2 server support for client authentication.
3045 *) Add support for FIPS mode in ssl library: disable SSLv3, non-FIPS ciphers
3049 *) Functions FIPS_mode_set() and FIPS_mode() which call the underlying
3050 FIPS modules versions.
3053 *) Add TLS v1.2 client side support for client authentication. Keep cache
3054 of handshake records longer as we don't know the hash algorithm to use
3055 until after the certificate request message is received.
3058 *) Initial TLS v1.2 client support. Add a default signature algorithms
3059 extension including all the algorithms we support. Parse new signature
3060 format in client key exchange. Relax some ECC signing restrictions for
3061 TLS v1.2 as indicated in RFC5246.
3064 *) Add server support for TLS v1.2 signature algorithms extension. Switch
3065 to new signature format when needed using client digest preference.
3066 All server ciphersuites should now work correctly in TLS v1.2. No client
3067 support yet and no support for client certificates.
3070 *) Initial TLS v1.2 support. Add new SHA256 digest to ssl code, switch
3071 to SHA256 for PRF when using TLS v1.2 and later. Add new SHA256 based
3072 ciphersuites. At present only RSA key exchange ciphersuites work with
3073 TLS v1.2. Add new option for TLS v1.2 replacing the old and obsolete
3074 SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
3075 and version checking.
3078 *) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
3079 with this defined it will not be affected by any changes to ssl internal
3080 structures. Add several utility functions to allow openssl application
3081 to work with OPENSSL_NO_SSL_INTERN defined.
3084 *) A long standing patch to add support for SRP from EdelWeb (Peter
3085 Sylvester and Christophe Renou) was integrated.
3086 [Christophe Renou <christophe.renou@edelweb.fr>, Peter Sylvester
3087 <peter.sylvester@edelweb.fr>, Tom Wu <tjw@cs.stanford.edu>, and
3090 *) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
3093 *) Permit abbreviated handshakes when renegotiating using the function
3094 SSL_renegotiate_abbreviated().
3095 [Robin Seggelmann <seggelmann@fh-muenster.de>]
3097 *) Add call to ENGINE_register_all_complete() to
3098 ENGINE_load_builtin_engines(), so some implementations get used
3099 automatically instead of needing explicit application support.
3102 *) Add support for TLS key exporter as described in RFC5705.
3103 [Robin Seggelmann <seggelmann@fh-muenster.de>, Steve Henson]
3105 *) Initial TLSv1.1 support. Since TLSv1.1 is very similar to TLS v1.0 only
3106 a few changes are required:
3108 Add SSL_OP_NO_TLSv1_1 flag.
3109 Add TLSv1_1 methods.
3110 Update version checking logic to handle version 1.1.
3111 Add explicit IV handling (ported from DTLS code).
3112 Add command line options to s_client/s_server.
3115 Changes between 1.0.0g and 1.0.0h [12 Mar 2012]
3117 *) Fix MMA (Bleichenbacher's attack on PKCS #1 v1.5 RSA padding) weakness
3118 in CMS and PKCS7 code. When RSA decryption fails use a random key for
3119 content decryption and always return the same error. Note: this attack
3120 needs on average 2^20 messages so it only affects automated senders. The
3121 old behaviour can be re-enabled in the CMS code by setting the
3122 CMS_DEBUG_DECRYPT flag: this is useful for debugging and testing where
3123 an MMA defence is not necessary.
3124 Thanks to Ivan Nestlerode <inestlerode@us.ibm.com> for discovering
3125 this issue. (CVE-2012-0884)
3128 *) Fix CVE-2011-4619: make sure we really are receiving a
3129 client hello before rejecting multiple SGC restarts. Thanks to
3130 Ivan Nestlerode <inestlerode@us.ibm.com> for discovering this bug.
3133 Changes between 1.0.0f and 1.0.0g [18 Jan 2012]
3135 *) Fix for DTLS DoS issue introduced by fix for CVE-2011-4109.
3136 Thanks to Antonio Martin, Enterprise Secure Access Research and
3137 Development, Cisco Systems, Inc. for discovering this bug and
3138 preparing a fix. (CVE-2012-0050)
3141 Changes between 1.0.0e and 1.0.0f [4 Jan 2012]
3143 *) Nadhem Alfardan and Kenny Paterson have discovered an extension
3144 of the Vaudenay padding oracle attack on CBC mode encryption
3145 which enables an efficient plaintext recovery attack against
3146 the OpenSSL implementation of DTLS. Their attack exploits timing
3147 differences arising during decryption processing. A research
3148 paper describing this attack can be found at:
3149 http://www.isg.rhul.ac.uk/~kp/dtls.pdf
3150 Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
3151 Security Group at Royal Holloway, University of London
3152 (www.isg.rhul.ac.uk) for discovering this flaw and to Robin Seggelmann
3153 <seggelmann@fh-muenster.de> and Michael Tuexen <tuexen@fh-muenster.de>
3154 for preparing the fix. (CVE-2011-4108)
3155 [Robin Seggelmann, Michael Tuexen]
3157 *) Clear bytes used for block padding of SSL 3.0 records.
3159 [Adam Langley (Google)]
3161 *) Only allow one SGC handshake restart for SSL/TLS. Thanks to George
3162 Kadianakis <desnacked@gmail.com> for discovering this issue and
3163 Adam Langley for preparing the fix. (CVE-2011-4619)
3164 [Adam Langley (Google)]
3166 *) Check parameters are not NULL in GOST ENGINE. (CVE-2012-0027)
3167 [Andrey Kulikov <amdeich@gmail.com>]
3169 *) Prevent malformed RFC3779 data triggering an assertion failure.
3170 Thanks to Andrew Chi, BBN Technologies, for discovering the flaw
3171 and Rob Austein <sra@hactrn.net> for fixing it. (CVE-2011-4577)
3172 [Rob Austein <sra@hactrn.net>]
3174 *) Improved PRNG seeding for VOS.
3175 [Paul Green <Paul.Green@stratus.com>]
3177 *) Fix ssl_ciph.c set-up race.
3178 [Adam Langley (Google)]
3180 *) Fix spurious failures in ecdsatest.c.
3181 [Emilia Käsper (Google)]
3183 *) Fix the BIO_f_buffer() implementation (which was mixing different
3184 interpretations of the '..._len' fields).
3185 [Adam Langley (Google)]
3187 *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
3188 BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
3189 threads won't reuse the same blinding coefficients.
3191 This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
3192 lock to call BN_BLINDING_invert_ex, and avoids one use of
3193 BN_BLINDING_update for each BN_BLINDING structure (previously,
3194 the last update always remained unused).
3195 [Emilia Käsper (Google)]
3197 *) In ssl3_clear, preserve s3->init_extra along with s3->rbuf.
3198 [Bob Buckholz (Google)]
3200 Changes between 1.0.0d and 1.0.0e [6 Sep 2011]
3202 *) Fix bug where CRLs with nextUpdate in the past are sometimes accepted
3203 by initialising X509_STORE_CTX properly. (CVE-2011-3207)
3204 [Kaspar Brand <ossl@velox.ch>]
3206 *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
3207 for multi-threaded use of ECDH. (CVE-2011-3210)
3208 [Adam Langley (Google)]
3210 *) Fix x509_name_ex_d2i memory leak on bad inputs.
3213 *) Remove hard coded ecdsaWithSHA1 signature tests in ssl code and check
3214 signature public key algorithm by using OID xref utilities instead.
3215 Before this you could only use some ECC ciphersuites with SHA1 only.
3218 *) Add protection against ECDSA timing attacks as mentioned in the paper
3219 by Billy Bob Brumley and Nicola Tuveri, see:
3221 http://eprint.iacr.org/2011/232.pdf
3223 [Billy Bob Brumley and Nicola Tuveri]
3225 Changes between 1.0.0c and 1.0.0d [8 Feb 2011]
3227 *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
3228 [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
3230 *) Fix bug in string printing code: if *any* escaping is enabled we must
3231 escape the escape character (backslash) or the resulting string is
3235 Changes between 1.0.0b and 1.0.0c [2 Dec 2010]
3237 *) Disable code workaround for ancient and obsolete Netscape browsers
3238 and servers: an attacker can use it in a ciphersuite downgrade attack.
3239 Thanks to Martin Rex for discovering this bug. CVE-2010-4180
3242 *) Fixed J-PAKE implementation error, originally discovered by
3243 Sebastien Martini, further info and confirmation from Stefan
3244 Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
3247 Changes between 1.0.0a and 1.0.0b [16 Nov 2010]
3249 *) Fix extension code to avoid race conditions which can result in a buffer
3250 overrun vulnerability: resumed sessions must not be modified as they can
3251 be shared by multiple threads. CVE-2010-3864
3254 *) Fix WIN32 build system to correctly link an ENGINE directory into
3258 Changes between 1.0.0 and 1.0.0a [01 Jun 2010]
3260 *) Check return value of int_rsa_verify in pkey_rsa_verifyrecover
3262 [Steve Henson, Peter-Michael Hager <hager@dortmund.net>]
3264 Changes between 0.9.8n and 1.0.0 [29 Mar 2010]
3266 *) Add "missing" function EVP_CIPHER_CTX_copy(). This copies a cipher
3267 context. The operation can be customised via the ctrl mechanism in
3268 case ENGINEs want to include additional functionality.
3271 *) Tolerate yet another broken PKCS#8 key format: private key value negative.
3274 *) Add new -subject_hash_old and -issuer_hash_old options to x509 utility to
3275 output hashes compatible with older versions of OpenSSL.
3276 [Willy Weisz <weisz@vcpc.univie.ac.at>]
3278 *) Fix compression algorithm handling: if resuming a session use the
3279 compression algorithm of the resumed session instead of determining
3280 it from client hello again. Don't allow server to change algorithm.
3283 *) Add load_crls() function to apps tidying load_certs() too. Add option
3284 to verify utility to allow additional CRLs to be included.
3287 *) Update OCSP request code to permit adding custom headers to the request:
3288 some responders need this.
3291 *) The function EVP_PKEY_sign() returns <=0 on error: check return code
3293 [Julia Lawall <julia@diku.dk>]
3295 *) Update verify callback code in apps/s_cb.c and apps/verify.c, it
3296 needlessly dereferenced structures, used obsolete functions and
3297 didn't handle all updated verify codes correctly.
3300 *) Disable MD2 in the default configuration.
3303 *) In BIO_pop() and BIO_push() use the ctrl argument (which was NULL) to
3304 indicate the initial BIO being pushed or popped. This makes it possible
3305 to determine whether the BIO is the one explicitly called or as a result
3306 of the ctrl being passed down the chain. Fix BIO_pop() and SSL BIOs so
3307 it handles reference counts correctly and doesn't zero out the I/O bio
3308 when it is not being explicitly popped. WARNING: applications which
3309 included workarounds for the old buggy behaviour will need to be modified
3310 or they could free up already freed BIOs.
3313 *) Extend the uni2asc/asc2uni => OPENSSL_uni2asc/OPENSSL_asc2uni
3314 renaming to all platforms (within the 0.9.8 branch, this was
3315 done conditionally on Netware platforms to avoid a name clash).
3316 [Guenter <lists@gknw.net>]
3318 *) Add ECDHE and PSK support to DTLS.
3319 [Michael Tuexen <tuexen@fh-muenster.de>]
3321 *) Add CHECKED_STACK_OF macro to safestack.h, otherwise safestack can't
3325 *) Add "missing" function EVP_MD_flags() (without this the only way to
3326 retrieve a digest flags is by accessing the structure directly. Update
3327 EVP_MD_do_all*() and EVP_CIPHER_do_all*() to include the name a digest
3328 or cipher is registered as in the "from" argument. Print out all
3329 registered digests in the dgst usage message instead of manually
3330 attempting to work them out.
3333 *) If no SSLv2 ciphers are used don't use an SSLv2 compatible client hello:
3334 this allows the use of compression and extensions. Change default cipher
3335 string to remove SSLv2 ciphersuites. This effectively avoids ancient SSLv2
3336 by default unless an application cipher string requests it.
3339 *) Alter match criteria in PKCS12_parse(). It used to try to use local
3340 key ids to find matching certificates and keys but some PKCS#12 files
3341 don't follow the (somewhat unwritten) rules and this strategy fails.
3342 Now just gather all certificates together and the first private key
3343 then look for the first certificate that matches the key.
3346 *) Support use of registered digest and cipher names for dgst and cipher
3347 commands instead of having to add each one as a special case. So now
3354 openssl dgst -sha256 foo
3356 and this works for ENGINE based algorithms too.
3360 *) Update Gost ENGINE to support parameter files.
3361 [Victor B. Wagner <vitus@cryptocom.ru>]
3363 *) Support GeneralizedTime in ca utility.
3364 [Oliver Martin <oliver@volatilevoid.net>, Steve Henson]
3366 *) Enhance the hash format used for certificate directory links. The new
3367 form uses the canonical encoding (meaning equivalent names will work
3368 even if they aren't identical) and uses SHA1 instead of MD5. This form
3369 is incompatible with the older format and as a result c_rehash should
3370 be used to rebuild symbolic links.
3373 *) Make PKCS#8 the default write format for private keys, replacing the
3374 traditional format. This form is standardised, more secure and doesn't
3375 include an implicit MD5 dependency.
3378 *) Add a $gcc_devteam_warn option to Configure. The idea is that any code
3379 committed to OpenSSL should pass this lot as a minimum.
3382 *) Add session ticket override functionality for use by EAP-FAST.
3383 [Jouni Malinen <j@w1.fi>]
3385 *) Modify HMAC functions to return a value. Since these can be implemented
3386 in an ENGINE errors can occur.
3389 *) Type-checked OBJ_bsearch_ex.
3392 *) Type-checked OBJ_bsearch. Also some constification necessitated
3393 by type-checking. Still to come: TXT_DB, bsearch(?),
3394 OBJ_bsearch_ex, qsort, CRYPTO_EX_DATA, ASN1_VALUE, ASN1_STRING,
3398 *) New function OPENSSL_gmtime_adj() to add a specific number of days and
3399 seconds to a tm structure directly, instead of going through OS
3400 specific date routines. This avoids any issues with OS routines such
3401 as the year 2038 bug. New *_adj() functions for ASN1 time structures
3402 and X509_time_adj_ex() to cover the extended range. The existing
3403 X509_time_adj() is still usable and will no longer have any date issues.
3406 *) Delta CRL support. New use deltas option which will attempt to locate
3407 and search any appropriate delta CRLs available.
3409 This work was sponsored by Google.
3412 *) Support for CRLs partitioned by reason code. Reorganise CRL processing
3413 code and add additional score elements. Validate alternate CRL paths
3414 as part of the CRL checking and indicate a new error "CRL path validation
3415 error" in this case. Applications wanting additional details can use
3416 the verify callback and check the new "parent" field. If this is not
3417 NULL CRL path validation is taking place. Existing applications won't
3418 see this because it requires extended CRL support which is off by
3421 This work was sponsored by Google.
3424 *) Support for freshest CRL extension.
3426 This work was sponsored by Google.
3429 *) Initial indirect CRL support. Currently only supported in the CRLs
3430 passed directly and not via lookup. Process certificate issuer
3431 CRL entry extension and lookup CRL entries by bother issuer name
3432 and serial number. Check and process CRL issuer entry in IDP extension.
3434 This work was sponsored by Google.
3437 *) Add support for distinct certificate and CRL paths. The CRL issuer
3438 certificate is validated separately in this case. Only enabled if
3439 an extended CRL support flag is set: this flag will enable additional
3440 CRL functionality in future.
3442 This work was sponsored by Google.
3445 *) Add support for policy mappings extension.
3447 This work was sponsored by Google.
3450 *) Fixes to pathlength constraint, self issued certificate handling,
3451 policy processing to align with RFC3280 and PKITS tests.
3453 This work was sponsored by Google.
3456 *) Support for name constraints certificate extension. DN, email, DNS
3457 and URI types are currently supported.
3459 This work was sponsored by Google.
3462 *) To cater for systems that provide a pointer-based thread ID rather
3463 than numeric, deprecate the current numeric thread ID mechanism and
3464 replace it with a structure and associated callback type. This
3465 mechanism allows a numeric "hash" to be extracted from a thread ID in
3466 either case, and on platforms where pointers are larger than 'long',
3467 mixing is done to help ensure the numeric 'hash' is usable even if it
3468 can't be guaranteed unique. The default mechanism is to use "&errno"
3469 as a pointer-based thread ID to distinguish between threads.
3471 Applications that want to provide their own thread IDs should now use
3472 CRYPTO_THREADID_set_callback() to register a callback that will call
3473 either CRYPTO_THREADID_set_numeric() or CRYPTO_THREADID_set_pointer().
3475 Note that ERR_remove_state() is now deprecated, because it is tied
3476 to the assumption that thread IDs are numeric. ERR_remove_state(0)
3477 to free the current thread's error state should be replaced by
3478 ERR_remove_thread_state(NULL).
3480 (This new approach replaces the functions CRYPTO_set_idptr_callback(),
3481 CRYPTO_get_idptr_callback(), and CRYPTO_thread_idptr() that existed in
3482 OpenSSL 0.9.9-dev between June 2006 and August 2008. Also, if an
3483 application was previously providing a numeric thread callback that
3484 was inappropriate for distinguishing threads, then uniqueness might
3485 have been obtained with &errno that happened immediately in the
3486 intermediate development versions of OpenSSL; this is no longer the
3487 case, the numeric thread callback will now override the automatic use
3489 [Geoff Thorpe, with help from Bodo Moeller]
3491 *) Initial support for different CRL issuing certificates. This covers a
3492 simple case where the self issued certificates in the chain exist and
3493 the real CRL issuer is higher in the existing chain.
3495 This work was sponsored by Google.
3498 *) Removed effectively defunct crypto/store from the build.
3501 *) Revamp of STACK to provide stronger type-checking. Still to come:
3502 TXT_DB, bsearch(?), OBJ_bsearch, qsort, CRYPTO_EX_DATA, ASN1_VALUE,
3503 ASN1_STRING, CONF_VALUE.
3506 *) Add a new SSL_MODE_RELEASE_BUFFERS mode flag to release unused buffer
3507 RAM on SSL connections. This option can save about 34k per idle SSL.
3510 *) Revamp of LHASH to provide stronger type-checking. Still to come:
3511 STACK, TXT_DB, bsearch, qsort.
3514 *) Initial support for Cryptographic Message Syntax (aka CMS) based
3515 on RFC3850, RFC3851 and RFC3852. New cms directory and cms utility,
3516 support for data, signedData, compressedData, digestedData and
3517 encryptedData, envelopedData types included. Scripts to check against
3518 RFC4134 examples draft and interop and consistency checks of many
3519 content types and variants.
3522 *) Add options to enc utility to support use of zlib compression BIO.
3525 *) Extend mk1mf to support importing of options and assembly language
3526 files from Configure script, currently only included in VC-WIN32.
3527 The assembly language rules can now optionally generate the source
3528 files from the associated perl scripts.
3531 *) Implement remaining functionality needed to support GOST ciphersuites.
3532 Interop testing has been performed using CryptoPro implementations.
3533 [Victor B. Wagner <vitus@cryptocom.ru>]
3535 *) s390x assembler pack.
3538 *) ARMv4 assembler pack. ARMv4 refers to v4 and later ISA, not CPU
3542 *) Implement Opaque PRF Input TLS extension as specified in
3543 draft-rescorla-tls-opaque-prf-input-00.txt. Since this is not an
3544 official specification yet and no extension type assignment by
3545 IANA exists, this extension (for now) will have to be explicitly
3546 enabled when building OpenSSL by providing the extension number
3547 to use. For example, specify an option
3549 -DTLSEXT_TYPE_opaque_prf_input=0x9527
3551 to the "config" or "Configure" script to enable the extension,
3552 assuming extension number 0x9527 (which is a completely arbitrary
3553 and unofficial assignment based on the MD5 hash of the Internet
3554 Draft). Note that by doing so, you potentially lose
3555 interoperability with other TLS implementations since these might
3556 be using the same extension number for other purposes.
3558 SSL_set_tlsext_opaque_prf_input(ssl, src, len) is used to set the
3559 opaque PRF input value to use in the handshake. This will create
3560 an interal copy of the length-'len' string at 'src', and will
3561 return non-zero for success.
3563 To get more control and flexibility, provide a callback function
3566 SSL_CTX_set_tlsext_opaque_prf_input_callback(ctx, cb)
3567 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg(ctx, arg)
3571 int (*cb)(SSL *, void *peerinput, size_t len, void *arg);
3574 Callback function 'cb' will be called in handshakes, and is
3575 expected to use SSL_set_tlsext_opaque_prf_input() as appropriate.
3576 Argument 'arg' is for application purposes (the value as given to
3577 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg() will directly
3578 be provided to the callback function). The callback function
3579 has to return non-zero to report success: usually 1 to use opaque
3580 PRF input just if possible, or 2 to enforce use of the opaque PRF
3581 input. In the latter case, the library will abort the handshake
3582 if opaque PRF input is not successfully negotiated.
3584 Arguments 'peerinput' and 'len' given to the callback function
3585 will always be NULL and 0 in the case of a client. A server will
3586 see the client's opaque PRF input through these variables if
3587 available (NULL and 0 otherwise). Note that if the server
3588 provides an opaque PRF input, the length must be the same as the
3589 length of the client's opaque PRF input.
3591 Note that the callback function will only be called when creating
3592 a new session (session resumption can resume whatever was
3593 previously negotiated), and will not be called in SSL 2.0
3594 handshakes; thus, SSL_CTX_set_options(ctx, SSL_OP_NO_SSLv2) or
3595 SSL_set_options(ssl, SSL_OP_NO_SSLv2) is especially recommended
3596 for applications that need to enforce opaque PRF input.
3600 *) Update ssl code to support digests other than SHA1+MD5 for handshake
3603 [Victor B. Wagner <vitus@cryptocom.ru>]
3605 *) Add RFC4507 support to OpenSSL. This includes the corrections in
3606 RFC4507bis. The encrypted ticket format is an encrypted encoded
3607 SSL_SESSION structure, that way new session features are automatically
3610 If a client application caches session in an SSL_SESSION structure
3611 support is transparent because tickets are now stored in the encoded
3614 The SSL_CTX structure automatically generates keys for ticket
3615 protection in servers so again support should be possible
3616 with no application modification.
3618 If a client or server wishes to disable RFC4507 support then the option
3619 SSL_OP_NO_TICKET can be set.
3621 Add a TLS extension debugging callback to allow the contents of any client
3622 or server extensions to be examined.
3624 This work was sponsored by Google.
3627 *) Final changes to avoid use of pointer pointer casts in OpenSSL.
3628 OpenSSL should now compile cleanly on gcc 4.2
3629 [Peter Hartley <pdh@utter.chaos.org.uk>, Steve Henson]
3631 *) Update SSL library to use new EVP_PKEY MAC API. Include generic MAC
3632 support including streaming MAC support: this is required for GOST
3633 ciphersuite support.
3634 [Victor B. Wagner <vitus@cryptocom.ru>, Steve Henson]
3636 *) Add option -stream to use PKCS#7 streaming in smime utility. New
3637 function i2d_PKCS7_bio_stream() and PEM_write_PKCS7_bio_stream()
3638 to output in BER and PEM format.
3641 *) Experimental support for use of HMAC via EVP_PKEY interface. This
3642 allows HMAC to be handled via the EVP_DigestSign*() interface. The
3643 EVP_PKEY "key" in this case is the HMAC key, potentially allowing
3644 ENGINE support for HMAC keys which are unextractable. New -mac and
3645 -macopt options to dgst utility.
3648 *) New option -sigopt to dgst utility. Update dgst to use
3649 EVP_Digest{Sign,Verify}*. These two changes make it possible to use
3650 alternative signing parameters such as X9.31 or PSS in the dgst
3654 *) Change ssl_cipher_apply_rule(), the internal function that does
3655 the work each time a ciphersuite string requests enabling
3656 ("foo+bar"), moving ("+foo+bar"), disabling ("-foo+bar", or
3657 removing ("!foo+bar") a class of ciphersuites: Now it maintains
3658 the order of disabled ciphersuites such that those ciphersuites
3659 that most recently went from enabled to disabled not only stay
3660 in order with respect to each other, but also have higher priority
3661 than other disabled ciphersuites the next time ciphersuites are
3664 This means that you can now say, e.g., "PSK:-PSK:HIGH" to enable
3665 the same ciphersuites as with "HIGH" alone, but in a specific
3666 order where the PSK ciphersuites come first (since they are the
3667 most recently disabled ciphersuites when "HIGH" is parsed).
3669 Also, change ssl_create_cipher_list() (using this new
3670 funcionality) such that between otherwise identical
3671 cihpersuites, ephemeral ECDH is preferred over ephemeral DH in
3675 *) Change ssl_create_cipher_list() so that it automatically
3676 arranges the ciphersuites in reasonable order before starting
3677 to process the rule string. Thus, the definition for "DEFAULT"
3678 (SSL_DEFAULT_CIPHER_LIST) now is just "ALL:!aNULL:!eNULL", but
3679 remains equivalent to "AES:ALL:!aNULL:!eNULL:+aECDH:+kRSA:+RC4:@STRENGTH".
3680 This makes it much easier to arrive at a reasonable default order
3681 in applications for which anonymous ciphers are OK (meaning
3682 that you can't actually use DEFAULT).
3683 [Bodo Moeller; suggested by Victor Duchovni]
3685 *) Split the SSL/TLS algorithm mask (as used for ciphersuite string
3686 processing) into multiple integers instead of setting
3687 "SSL_MKEY_MASK" bits, "SSL_AUTH_MASK" bits, "SSL_ENC_MASK",
3688 "SSL_MAC_MASK", and "SSL_SSL_MASK" bits all in a single integer.
3689 (These masks as well as the individual bit definitions are hidden
3690 away into the non-exported interface ssl/ssl_locl.h, so this
3691 change to the definition of the SSL_CIPHER structure shouldn't
3692 affect applications.) This give us more bits for each of these
3693 categories, so there is no longer a need to coagulate AES128 and
3694 AES256 into a single algorithm bit, and to coagulate Camellia128
3695 and Camellia256 into a single algorithm bit, which has led to all
3698 Thus, among other things, the kludge introduced in 0.9.7m and
3699 0.9.8e for masking out AES256 independently of AES128 or masking
3700 out Camellia256 independently of AES256 is not needed here in 0.9.9.
3702 With the change, we also introduce new ciphersuite aliases that
3703 so far were missing: "AES128", "AES256", "CAMELLIA128", and
3707 *) Add support for dsa-with-SHA224 and dsa-with-SHA256.
3708 Use the leftmost N bytes of the signature input if the input is
3709 larger than the prime q (with N being the size in bytes of q).
3712 *) Very *very* experimental PKCS#7 streaming encoder support. Nothing uses
3713 it yet and it is largely untested.
3716 *) Add support for the ecdsa-with-SHA224/256/384/512 signature types.
3719 *) Initial incomplete changes to avoid need for function casts in OpenSSL
3720 some compilers (gcc 4.2 and later) reject their use. Safestack is
3721 reimplemented. Update ASN1 to avoid use of legacy functions.
3724 *) Win32/64 targets are linked with Winsock2.
3727 *) Add an X509_CRL_METHOD structure to allow CRL processing to be redirected
3728 to external functions. This can be used to increase CRL handling
3729 efficiency especially when CRLs are very large by (for example) storing
3730 the CRL revoked certificates in a database.
3733 *) Overhaul of by_dir code. Add support for dynamic loading of CRLs so
3734 new CRLs added to a directory can be used. New command line option
3735 -verify_return_error to s_client and s_server. This causes real errors
3736 to be returned by the verify callback instead of carrying on no matter
3737 what. This reflects the way a "real world" verify callback would behave.
3740 *) GOST engine, supporting several GOST algorithms and public key formats.
3741 Kindly donated by Cryptocom.
3744 *) Partial support for Issuing Distribution Point CRL extension. CRLs
3745 partitioned by DP are handled but no indirect CRL or reason partitioning
3746 (yet). Complete overhaul of CRL handling: now the most suitable CRL is
3747 selected via a scoring technique which handles IDP and AKID in CRLs.
3750 *) New X509_STORE_CTX callbacks lookup_crls() and lookup_certs() which
3751 will ultimately be used for all verify operations: this will remove the
3752 X509_STORE dependency on certificate verification and allow alternative
3753 lookup methods. X509_STORE based implementations of these two callbacks.
3756 *) Allow multiple CRLs to exist in an X509_STORE with matching issuer names.
3757 Modify get_crl() to find a valid (unexpired) CRL if possible.
3760 *) New function X509_CRL_match() to check if two CRLs are identical. Normally
3761 this would be called X509_CRL_cmp() but that name is already used by
3762 a function that just compares CRL issuer names. Cache several CRL
3763 extensions in X509_CRL structure and cache CRLDP in X509.
3766 *) Store a "canonical" representation of X509_NAME structure (ASN1 Name)
3767 this maps equivalent X509_NAME structures into a consistent structure.
3768 Name comparison can then be performed rapidly using memcmp().
3771 *) Non-blocking OCSP request processing. Add -timeout option to ocsp
3775 *) Allow digests to supply their own micalg string for S/MIME type using
3776 the ctrl EVP_MD_CTRL_MICALG.
3779 *) During PKCS7 signing pass the PKCS7 SignerInfo structure to the
3780 EVP_PKEY_METHOD before and after signing via the EVP_PKEY_CTRL_PKCS7_SIGN
3781 ctrl. It can then customise the structure before and/or after signing
3785 *) New function OBJ_add_sigid() to allow application defined signature OIDs
3786 to be added to OpenSSLs internal tables. New function OBJ_sigid_free()
3787 to free up any added signature OIDs.
3790 *) New functions EVP_CIPHER_do_all(), EVP_CIPHER_do_all_sorted(),
3791 EVP_MD_do_all() and EVP_MD_do_all_sorted() to enumerate internal
3792 digest and cipher tables. New options added to openssl utility:
3793 list-message-digest-algorithms and list-cipher-algorithms.
3796 *) Change the array representation of binary polynomials: the list
3797 of degrees of non-zero coefficients is now terminated with -1.
3798 Previously it was terminated with 0, which was also part of the
3799 value; thus, the array representation was not applicable to
3800 polynomials where t^0 has coefficient zero. This change makes
3801 the array representation useful in a more general context.
3804 *) Various modifications and fixes to SSL/TLS cipher string
3805 handling. For ECC, the code now distinguishes between fixed ECDH
3806 with RSA certificates on the one hand and with ECDSA certificates
3807 on the other hand, since these are separate ciphersuites. The
3808 unused code for Fortezza ciphersuites has been removed.
3810 For consistency with EDH, ephemeral ECDH is now called "EECDH"
3811 (not "ECDHE"). For consistency with the code for DH
3812 certificates, use of ECDH certificates is now considered ECDH
3813 authentication, not RSA or ECDSA authentication (the latter is
3814 merely the CA's signing algorithm and not actively used in the
3817 The temporary ciphersuite alias "ECCdraft" is no longer
3818 available, and ECC ciphersuites are no longer excluded from "ALL"
3819 and "DEFAULT". The following aliases now exist for RFC 4492
3820 ciphersuites, most of these by analogy with the DH case:
3822 kECDHr - ECDH cert, signed with RSA
3823 kECDHe - ECDH cert, signed with ECDSA
3824 kECDH - ECDH cert (signed with either RSA or ECDSA)
3825 kEECDH - ephemeral ECDH
3826 ECDH - ECDH cert or ephemeral ECDH
3832 AECDH - anonymous ECDH
3833 EECDH - non-anonymous ephemeral ECDH (equivalent to "kEECDH:-AECDH")
3837 *) Add additional S/MIME capabilities for AES and GOST ciphers if supported.
3838 Use correct micalg parameters depending on digest(s) in signed message.
3841 *) Add engine support for EVP_PKEY_ASN1_METHOD. Add functions to process
3842 an ENGINE asn1 method. Support ENGINE lookups in the ASN1 code.
3845 *) Initial engine support for EVP_PKEY_METHOD. New functions to permit
3846 an engine to register a method. Add ENGINE lookups for methods and
3847 functional reference processing.
3850 *) New functions EVP_Digest{Sign,Verify)*. These are enchance versions of
3851 EVP_{Sign,Verify}* which allow an application to customise the signature
3855 *) New -resign option to smime utility. This adds one or more signers
3856 to an existing PKCS#7 signedData structure. Also -md option to use an
3857 alternative message digest algorithm for signing.
3860 *) Tidy up PKCS#7 routines and add new functions to make it easier to
3861 create PKCS7 structures containing multiple signers. Update smime
3862 application to support multiple signers.
3865 *) New -macalg option to pkcs12 utility to allow setting of an alternative
3869 *) Initial support for PKCS#5 v2.0 PRFs other than default SHA1 HMAC.
3870 Reorganize PBE internals to lookup from a static table using NIDs,
3871 add support for HMAC PBE OID translation. Add a EVP_CIPHER ctrl:
3872 EVP_CTRL_PBE_PRF_NID this allows a cipher to specify an alternative
3873 PRF which will be automatically used with PBES2.
3876 *) Replace the algorithm specific calls to generate keys in "req" with the
3880 *) Update PKCS#7 enveloped data routines to use new API. This is now
3881 supported by any public key method supporting the encrypt operation. A
3882 ctrl is added to allow the public key algorithm to examine or modify
3883 the PKCS#7 RecipientInfo structure if it needs to: for RSA this is
3887 *) Add a ctrl to asn1 method to allow a public key algorithm to express
3888 a default digest type to use. In most cases this will be SHA1 but some
3889 algorithms (such as GOST) need to specify an alternative digest. The
3890 return value indicates how strong the preference is 1 means optional and
3891 2 is mandatory (that is it is the only supported type). Modify
3892 ASN1_item_sign() to accept a NULL digest argument to indicate it should
3893 use the default md. Update openssl utilities to use the default digest
3894 type for signing if it is not explicitly indicated.
3897 *) Use OID cross reference table in ASN1_sign() and ASN1_verify(). New
3898 EVP_MD flag EVP_MD_FLAG_PKEY_METHOD_SIGNATURE. This uses the relevant
3899 signing method from the key type. This effectively removes the link
3900 between digests and public key types.
3903 *) Add an OID cross reference table and utility functions. Its purpose is to
3904 translate between signature OIDs such as SHA1WithrsaEncryption and SHA1,
3905 rsaEncryption. This will allow some of the algorithm specific hackery
3906 needed to use the correct OID to be removed.
3909 *) Remove algorithm specific dependencies when setting PKCS7_SIGNER_INFO
3910 structures for PKCS7_sign(). They are now set up by the relevant public
3914 *) Add provisional EC pkey method with support for ECDSA and ECDH.
3917 *) Add support for key derivation (agreement) in the API, DH method and
3921 *) Add DSA pkey method and DH pkey methods, extend DH ASN1 method to support
3922 public and private key formats. As a side effect these add additional
3923 command line functionality not previously available: DSA signatures can be
3924 generated and verified using pkeyutl and DH key support and generation in
3929 [Oliver Tappe <zooey@hirschkaefer.de>]
3931 *) New make target "install_html_docs" installs HTML renditions of the
3933 [Oliver Tappe <zooey@hirschkaefer.de>]
3935 *) New utility "genpkey" this is analogous to "genrsa" etc except it can
3936 generate keys for any algorithm. Extend and update EVP_PKEY_METHOD to
3937 support key and parameter generation and add initial key generation
3938 functionality for RSA.
3941 *) Add functions for main EVP_PKEY_method operations. The undocumented
3942 functions EVP_PKEY_{encrypt,decrypt} have been renamed to
3943 EVP_PKEY_{encrypt,decrypt}_old.
3946 *) Initial definitions for EVP_PKEY_METHOD. This will be a high level public
3947 key API, doesn't do much yet.
3950 *) New function EVP_PKEY_asn1_get0_info() to retrieve information about
3951 public key algorithms. New option to openssl utility:
3952 "list-public-key-algorithms" to print out info.
3955 *) Implement the Supported Elliptic Curves Extension for
3956 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
3959 *) Don't free up OIDs in OBJ_cleanup() if they are in use by EVP_MD or
3960 EVP_CIPHER structures to avoid later problems in EVP_cleanup().
3963 *) New utilities pkey and pkeyparam. These are similar to algorithm specific
3964 utilities such as rsa, dsa, dsaparam etc except they process any key
3968 *) Transfer public key printing routines to EVP_PKEY_ASN1_METHOD. New
3969 functions EVP_PKEY_print_public(), EVP_PKEY_print_private(),
3970 EVP_PKEY_print_param() to print public key data from an EVP_PKEY
3974 *) Initial support for pluggable public key ASN1.
3975 De-spaghettify the public key ASN1 handling. Move public and private
3976 key ASN1 handling to a new EVP_PKEY_ASN1_METHOD structure. Relocate
3977 algorithm specific handling to a single module within the relevant
3978 algorithm directory. Add functions to allow (near) opaque processing
3979 of public and private key structures.
3982 *) Implement the Supported Point Formats Extension for
3983 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
3986 *) Add initial support for RFC 4279 PSK TLS ciphersuites. Add members
3987 for the psk identity [hint] and the psk callback functions to the
3988 SSL_SESSION, SSL and SSL_CTX structure.
3991 PSK-RC4-SHA, PSK-3DES-EDE-CBC-SHA, PSK-AES128-CBC-SHA,
3995 SSL_CTX_use_psk_identity_hint
3996 SSL_get_psk_identity_hint
3997 SSL_get_psk_identity
3998 SSL_use_psk_identity_hint
4000 [Mika Kousa and Pasi Eronen of Nokia Corporation]
4002 *) Add RFC 3161 compliant time stamp request creation, response generation
4003 and response verification functionality.
4004 [Zoltán Glózik <zglozik@opentsa.org>, The OpenTSA Project]
4006 *) Add initial support for TLS extensions, specifically for the server_name
4007 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
4008 have new members for a host name. The SSL data structure has an
4009 additional member SSL_CTX *initial_ctx so that new sessions can be
4010 stored in that context to allow for session resumption, even after the
4011 SSL has been switched to a new SSL_CTX in reaction to a client's
4012 server_name extension.
4014 New functions (subject to change):
4016 SSL_get_servername()
4017 SSL_get_servername_type()
4020 New CTRL codes and macros (subject to change):
4022 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
4023 - SSL_CTX_set_tlsext_servername_callback()
4024 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
4025 - SSL_CTX_set_tlsext_servername_arg()
4026 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
4028 openssl s_client has a new '-servername ...' option.
4030 openssl s_server has new options '-servername_host ...', '-cert2 ...',
4031 '-key2 ...', '-servername_fatal' (subject to change). This allows
4032 testing the HostName extension for a specific single host name ('-cert'
4033 and '-key' remain fallbacks for handshakes without HostName
4034 negotiation). If the unrecognized_name alert has to be sent, this by
4035 default is a warning; it becomes fatal with the '-servername_fatal'
4038 [Peter Sylvester, Remy Allais, Christophe Renou]
4040 *) Whirlpool hash implementation is added.
4043 *) BIGNUM code on 64-bit SPARCv9 targets is switched from bn(64,64) to
4044 bn(64,32). Because of instruction set limitations it doesn't have
4045 any negative impact on performance. This was done mostly in order
4046 to make it possible to share assembler modules, such as bn_mul_mont
4047 implementations, between 32- and 64-bit builds without hassle.
4050 *) Move code previously exiled into file crypto/ec/ec2_smpt.c
4051 to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
4055 *) New candidate for BIGNUM assembler implementation, bn_mul_mont,
4056 dedicated Montgomery multiplication procedure, is introduced.
4057 BN_MONT_CTX is modified to allow bn_mul_mont to reach for higher
4058 "64-bit" performance on certain 32-bit targets.
4061 *) New option SSL_OP_NO_COMP to disable use of compression selectively
4062 in SSL structures. New SSL ctrl to set maximum send fragment size.
4063 Save memory by seeting the I/O buffer sizes dynamically instead of
4064 using the maximum available value.
4067 *) New option -V for 'openssl ciphers'. This prints the ciphersuite code
4068 in addition to the text details.
4071 *) Very, very preliminary EXPERIMENTAL support for printing of general
4072 ASN1 structures. This currently produces rather ugly output and doesn't
4073 handle several customised structures at all.
4076 *) Integrated support for PVK file format and some related formats such
4077 as MS PUBLICKEYBLOB and PRIVATEKEYBLOB. Command line switches to support
4078 these in the 'rsa' and 'dsa' utilities.
4081 *) Support for PKCS#1 RSAPublicKey format on rsa utility command line.
4084 *) Remove the ancient ASN1_METHOD code. This was only ever used in one
4085 place for the (very old) "NETSCAPE" format certificates which are now
4086 handled using new ASN1 code equivalents.
4089 *) Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
4090 pointer and make the SSL_METHOD parameter in SSL_CTX_new,
4091 SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
4094 *) Modify CRL distribution points extension code to print out previously
4095 unsupported fields. Enhance extension setting code to allow setting of
4099 *) Add print and set support for Issuing Distribution Point CRL extension.
4102 *) Change 'Configure' script to enable Camellia by default.
4105 Changes between 0.9.8m and 0.9.8n [24 Mar 2010]
4107 *) When rejecting SSL/TLS records due to an incorrect version number, never
4108 update s->server with a new major version number. As of
4109 - OpenSSL 0.9.8m if 'short' is a 16-bit type,
4110 - OpenSSL 0.9.8f if 'short' is longer than 16 bits,
4111 the previous behavior could result in a read attempt at NULL when
4112 receiving specific incorrect SSL/TLS records once record payload
4113 protection is active. (CVE-2010-0740)
4114 [Bodo Moeller, Adam Langley <agl@chromium.org>]
4116 *) Fix for CVE-2010-0433 where some kerberos enabled versions of OpenSSL
4117 could be crashed if the relevant tables were not present (e.g. chrooted).
4118 [Tomas Hoger <thoger@redhat.com>]
4120 Changes between 0.9.8l and 0.9.8m [25 Feb 2010]
4122 *) Always check bn_wexpend() return values for failure. (CVE-2009-3245)
4123 [Martin Olsson, Neel Mehta]
4125 *) Fix X509_STORE locking: Every 'objs' access requires a lock (to
4126 accommodate for stack sorting, always a write lock!).
4129 *) On some versions of WIN32 Heap32Next is very slow. This can cause
4130 excessive delays in the RAND_poll(): over a minute. As a workaround
4131 include a time check in the inner Heap32Next loop too.
4134 *) The code that handled flushing of data in SSL/TLS originally used the
4135 BIO_CTRL_INFO ctrl to see if any data was pending first. This caused
4136 the problem outlined in PR#1949. The fix suggested there however can
4137 trigger problems with buggy BIO_CTRL_WPENDING (e.g. some versions
4138 of Apache). So instead simplify the code to flush unconditionally.
4139 This should be fine since flushing with no data to flush is a no op.
4142 *) Handle TLS versions 2.0 and later properly and correctly use the
4143 highest version of TLS/SSL supported. Although TLS >= 2.0 is some way
4144 off ancient servers have a habit of sticking around for a while...
4147 *) Modify compression code so it frees up structures without using the
4148 ex_data callbacks. This works around a problem where some applications
4149 call CRYPTO_cleanup_all_ex_data() before application exit (e.g. when
4150 restarting) then use compression (e.g. SSL with compression) later.
4151 This results in significant per-connection memory leaks and
4152 has caused some security issues including CVE-2008-1678 and
4156 *) Constify crypto/cast (i.e., <openssl/cast.h>): a CAST_KEY doesn't
4157 change when encrypting or decrypting.
4160 *) Add option SSL_OP_LEGACY_SERVER_CONNECT which will allow clients to
4161 connect and renegotiate with servers which do not support RI.
4162 Until RI is more widely deployed this option is enabled by default.
4165 *) Add "missing" ssl ctrls to clear options and mode.
4168 *) If client attempts to renegotiate and doesn't support RI respond with
4169 a no_renegotiation alert as required by RFC5746. Some renegotiating
4170 TLS clients will continue a connection gracefully when they receive
4171 the alert. Unfortunately OpenSSL mishandled this alert and would hang
4172 waiting for a server hello which it will never receive. Now we treat a
4173 received no_renegotiation alert as a fatal error. This is because
4174 applications requesting a renegotiation might well expect it to succeed
4175 and would have no code in place to handle the server denying it so the
4176 only safe thing to do is to terminate the connection.
4179 *) Add ctrl macro SSL_get_secure_renegotiation_support() which returns 1 if
4180 peer supports secure renegotiation and 0 otherwise. Print out peer
4181 renegotiation support in s_client/s_server.
4184 *) Replace the highly broken and deprecated SPKAC certification method with
4185 the updated NID creation version. This should correctly handle UTF8.
4188 *) Implement RFC5746. Re-enable renegotiation but require the extension
4189 as needed. Unfortunately, SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
4190 turns out to be a bad idea. It has been replaced by
4191 SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION which can be set with
4192 SSL_CTX_set_options(). This is really not recommended unless you
4193 know what you are doing.
4194 [Eric Rescorla <ekr@networkresonance.com>, Ben Laurie, Steve Henson]
4196 *) Fixes to stateless session resumption handling. Use initial_ctx when
4197 issuing and attempting to decrypt tickets in case it has changed during
4198 servername handling. Use a non-zero length session ID when attempting
4199 stateless session resumption: this makes it possible to determine if
4200 a resumption has occurred immediately after receiving server hello
4201 (several places in OpenSSL subtly assume this) instead of later in
4205 *) The functions ENGINE_ctrl(), OPENSSL_isservice(),
4206 CMS_get1_RecipientRequest() and RAND_bytes() can return <=0 on error
4207 fixes for a few places where the return code is not checked
4209 [Julia Lawall <julia@diku.dk>]
4211 *) Add --strict-warnings option to Configure script to include devteam
4212 warnings in other configurations.
4215 *) Add support for --libdir option and LIBDIR variable in makefiles. This
4216 makes it possible to install openssl libraries in locations which
4217 have names other than "lib", for example "/usr/lib64" which some
4219 [Steve Henson, based on patch from Jeremy Utley]
4221 *) Don't allow the use of leading 0x80 in OIDs. This is a violation of
4222 X690 8.9.12 and can produce some misleading textual output of OIDs.
4223 [Steve Henson, reported by Dan Kaminsky]
4225 *) Delete MD2 from algorithm tables. This follows the recommendation in
4226 several standards that it is not used in new applications due to
4227 several cryptographic weaknesses. For binary compatibility reasons
4228 the MD2 API is still compiled in by default.
4231 *) Add compression id to {d2i,i2d}_SSL_SESSION so it is correctly saved
4235 *) Rename uni2asc and asc2uni functions to OPENSSL_uni2asc and
4236 OPENSSL_asc2uni conditionally on Netware platforms to avoid a name
4238 [Guenter <lists@gknw.net>]
4240 *) Fix the server certificate chain building code to use X509_verify_cert(),
4241 it used to have an ad-hoc builder which was unable to cope with anything
4242 other than a simple chain.
4243 [David Woodhouse <dwmw2@infradead.org>, Steve Henson]
4245 *) Don't check self signed certificate signatures in X509_verify_cert()
4246 by default (a flag can override this): it just wastes time without
4247 adding any security. As a useful side effect self signed root CAs
4248 with non-FIPS digests are now usable in FIPS mode.
4251 *) In dtls1_process_out_of_seq_message() the check if the current message
4252 is already buffered was missing. For every new message was memory
4253 allocated, allowing an attacker to perform an denial of service attack
4254 with sending out of seq handshake messages until there is no memory
4255 left. Additionally every future messege was buffered, even if the
4256 sequence number made no sense and would be part of another handshake.
4257 So only messages with sequence numbers less than 10 in advance will be
4258 buffered. (CVE-2009-1378)
4259 [Robin Seggelmann, discovered by Daniel Mentz]
4261 *) Records are buffered if they arrive with a future epoch to be
4262 processed after finishing the corresponding handshake. There is
4263 currently no limitation to this buffer allowing an attacker to perform
4264 a DOS attack with sending records with future epochs until there is no
4265 memory left. This patch adds the pqueue_size() function to determine
4266 the size of a buffer and limits the record buffer to 100 entries.
4268 [Robin Seggelmann, discovered by Daniel Mentz]
4270 *) Keep a copy of frag->msg_header.frag_len so it can be used after the
4271 parent structure is freed. (CVE-2009-1379)
4274 *) Handle non-blocking I/O properly in SSL_shutdown() call.
4275 [Darryl Miles <darryl-mailinglists@netbauds.net>]
4278 [Ilya O. <vrghost@gmail.com>]
4280 Changes between 0.9.8k and 0.9.8l [5 Nov 2009]
4282 *) Disable renegotiation completely - this fixes a severe security
4283 problem (CVE-2009-3555) at the cost of breaking all
4284 renegotiation. Renegotiation can be re-enabled by setting
4285 SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION in s3->flags at
4286 run-time. This is really not recommended unless you know what
4290 Changes between 0.9.8j and 0.9.8k [25 Mar 2009]
4292 *) Don't set val to NULL when freeing up structures, it is freed up by
4293 underlying code. If sizeof(void *) > sizeof(long) this can result in
4294 zeroing past the valid field. (CVE-2009-0789)
4295 [Paolo Ganci <Paolo.Ganci@AdNovum.CH>]
4297 *) Fix bug where return value of CMS_SignerInfo_verify_content() was not
4298 checked correctly. This would allow some invalid signed attributes to
4299 appear to verify correctly. (CVE-2009-0591)
4300 [Ivan Nestlerode <inestlerode@us.ibm.com>]
4302 *) Reject UniversalString and BMPString types with invalid lengths. This
4303 prevents a crash in ASN1_STRING_print_ex() which assumes the strings have
4304 a legal length. (CVE-2009-0590)
4307 *) Set S/MIME signing as the default purpose rather than setting it
4308 unconditionally. This allows applications to override it at the store
4312 *) Permit restricted recursion of ASN1 strings. This is needed in practice
4313 to handle some structures.
4316 *) Improve efficiency of mem_gets: don't search whole buffer each time
4318 [Jeremy Shapiro <jnshapir@us.ibm.com>]
4320 *) New -hex option for openssl rand.
4323 *) Print out UTF8String and NumericString when parsing ASN1.
4326 *) Support NumericString type for name components.
4329 *) Allow CC in the environment to override the automatically chosen
4330 compiler. Note that nothing is done to ensure flags work with the
4334 Changes between 0.9.8i and 0.9.8j [07 Jan 2009]
4336 *) Properly check EVP_VerifyFinal() and similar return values
4338 [Ben Laurie, Bodo Moeller, Google Security Team]
4340 *) Enable TLS extensions by default.
4343 *) Allow the CHIL engine to be loaded, whether the application is
4344 multithreaded or not. (This does not release the developer from the
4345 obligation to set up the dynamic locking callbacks.)
4346 [Sander Temme <sander@temme.net>]
4348 *) Use correct exit code if there is an error in dgst command.
4349 [Steve Henson; problem pointed out by Roland Dirlewanger]
4351 *) Tweak Configure so that you need to say "experimental-jpake" to enable
4352 JPAKE, and need to use -DOPENSSL_EXPERIMENTAL_JPAKE in applications.
4355 *) Add experimental JPAKE support, including demo authentication in
4356 s_client and s_server.
4359 *) Set the comparison function in v3_addr_canonize().
4360 [Rob Austein <sra@hactrn.net>]
4362 *) Add support for XMPP STARTTLS in s_client.
4363 [Philip Paeps <philip@freebsd.org>]
4365 *) Change the server-side SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG behavior
4366 to ensure that even with this option, only ciphersuites in the
4367 server's preference list will be accepted. (Note that the option
4368 applies only when resuming a session, so the earlier behavior was
4369 just about the algorithm choice for symmetric cryptography.)
4372 Changes between 0.9.8h and 0.9.8i [15 Sep 2008]
4374 *) Fix NULL pointer dereference if a DTLS server received
4375 ChangeCipherSpec as first record (CVE-2009-1386).
4378 *) Fix a state transition in s3_srvr.c and d1_srvr.c
4379 (was using SSL3_ST_CW_CLNT_HELLO_B, should be ..._ST_SW_SRVR_...).
4382 *) The fix in 0.9.8c that supposedly got rid of unsafe
4383 double-checked locking was incomplete for RSA blinding,
4384 addressing just one layer of what turns out to have been
4385 doubly unsafe triple-checked locking.
4387 So now fix this for real by retiring the MONT_HELPER macro
4388 in crypto/rsa/rsa_eay.c.
4390 [Bodo Moeller; problem pointed out by Marius Schilder]
4392 *) Various precautionary measures:
4394 - Avoid size_t integer overflow in HASH_UPDATE (md32_common.h).
4396 - Avoid a buffer overflow in d2i_SSL_SESSION() (ssl_asn1.c).
4397 (NB: This would require knowledge of the secret session ticket key
4398 to exploit, in which case you'd be SOL either way.)
4400 - Change bn_nist.c so that it will properly handle input BIGNUMs
4401 outside the expected range.
4403 - Enforce the 'num' check in BN_div() (bn_div.c) for non-BN_DEBUG
4406 [Neel Mehta, Bodo Moeller]
4408 *) Allow engines to be "soft loaded" - i.e. optionally don't die if
4409 the load fails. Useful for distros.
4410 [Ben Laurie and the FreeBSD team]
4412 *) Add support for Local Machine Keyset attribute in PKCS#12 files.
4415 *) Fix BN_GF2m_mod_arr() top-bit cleanup code.
4418 *) Expand ENGINE to support engine supplied SSL client certificate functions.
4420 This work was sponsored by Logica.
4423 *) Add CryptoAPI ENGINE to support use of RSA and DSA keys held in Windows
4424 keystores. Support for SSL/TLS client authentication too.
4425 Not compiled unless enable-capieng specified to Configure.
4427 This work was sponsored by Logica.
4430 *) Fix bug in X509_ATTRIBUTE creation: don't set attribute using
4431 ASN1_TYPE_set1 if MBSTRING flag set. This bug would crash certain
4432 attribute creation routines such as certificate requests and PKCS#12
4436 Changes between 0.9.8g and 0.9.8h [28 May 2008]
4438 *) Fix flaw if 'Server Key exchange message' is omitted from a TLS
4439 handshake which could lead to a cilent crash as found using the
4440 Codenomicon TLS test suite (CVE-2008-1672)
4441 [Steve Henson, Mark Cox]
4443 *) Fix double free in TLS server name extensions which could lead to
4444 a remote crash found by Codenomicon TLS test suite (CVE-2008-0891)
4447 *) Clear error queue in SSL_CTX_use_certificate_chain_file()
4449 Clear the error queue to ensure that error entries left from
4450 older function calls do not interfere with the correct operation.
4451 [Lutz Jaenicke, Erik de Castro Lopo]
4453 *) Remove root CA certificates of commercial CAs:
4455 The OpenSSL project does not recommend any specific CA and does not
4456 have any policy with respect to including or excluding any CA.
4457 Therefore it does not make any sense to ship an arbitrary selection
4458 of root CA certificates with the OpenSSL software.
4461 *) RSA OAEP patches to fix two separate invalid memory reads.
4462 The first one involves inputs when 'lzero' is greater than
4463 'SHA_DIGEST_LENGTH' (it would read about SHA_DIGEST_LENGTH bytes
4464 before the beginning of from). The second one involves inputs where
4465 the 'db' section contains nothing but zeroes (there is a one-byte
4466 invalid read after the end of 'db').
4467 [Ivan Nestlerode <inestlerode@us.ibm.com>]
4469 *) Partial backport from 0.9.9-dev:
4471 Introduce bn_mul_mont (dedicated Montgomery multiplication
4472 procedure) as a candidate for BIGNUM assembler implementation.
4473 While 0.9.9-dev uses assembler for various architectures, only
4474 x86_64 is available by default here in the 0.9.8 branch, and
4475 32-bit x86 is available through a compile-time setting.
4477 To try the 32-bit x86 assembler implementation, use Configure
4478 option "enable-montasm" (which exists only for this backport).
4480 As "enable-montasm" for 32-bit x86 disclaims code stability
4481 anyway, in this constellation we activate additional code
4482 backported from 0.9.9-dev for further performance improvements,
4483 namely BN_from_montgomery_word. (To enable this otherwise,
4484 e.g. x86_64, try "-DMONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD".)
4486 [Andy Polyakov (backport partially by Bodo Moeller)]
4488 *) Add TLS session ticket callback. This allows an application to set
4489 TLS ticket cipher and HMAC keys rather than relying on hardcoded fixed
4490 values. This is useful for key rollover for example where several key
4491 sets may exist with different names.
4494 *) Reverse ENGINE-internal logic for caching default ENGINE handles.
4495 This was broken until now in 0.9.8 releases, such that the only way
4496 a registered ENGINE could be used (assuming it initialises
4497 successfully on the host) was to explicitly set it as the default
4498 for the relevant algorithms. This is in contradiction with 0.9.7
4499 behaviour and the documentation. With this fix, when an ENGINE is
4500 registered into a given algorithm's table of implementations, the
4501 'uptodate' flag is reset so that auto-discovery will be used next
4502 time a new context for that algorithm attempts to select an
4504 [Ian Lister (tweaked by Geoff Thorpe)]
4506 *) Backport of CMS code to OpenSSL 0.9.8. This differs from the 0.9.9
4507 implementation in the following ways:
4509 Lack of EVP_PKEY_ASN1_METHOD means algorithm parameters have to be
4512 Lack of BER streaming support means one pass streaming processing is
4513 only supported if data is detached: setting the streaming flag is
4514 ignored for embedded content.
4516 CMS support is disabled by default and must be explicitly enabled
4517 with the enable-cms configuration option.
4520 *) Update the GMP engine glue to do direct copies between BIGNUM and
4521 mpz_t when openssl and GMP use the same limb size. Otherwise the
4522 existing "conversion via a text string export" trick is still used.
4523 [Paul Sheer <paulsheer@gmail.com>]
4525 *) Zlib compression BIO. This is a filter BIO which compressed and
4526 uncompresses any data passed through it.
4529 *) Add AES_wrap_key() and AES_unwrap_key() functions to implement
4530 RFC3394 compatible AES key wrapping.
4533 *) Add utility functions to handle ASN1 structures. ASN1_STRING_set0():
4534 sets string data without copying. X509_ALGOR_set0() and
4535 X509_ALGOR_get0(): set and retrieve X509_ALGOR (AlgorithmIdentifier)
4536 data. Attribute function X509at_get0_data_by_OBJ(): retrieves data
4537 from an X509_ATTRIBUTE structure optionally checking it occurs only
4538 once. ASN1_TYPE_set1(): set and ASN1_TYPE structure copying supplied
4542 *) Fix BN flag handling in RSA_eay_mod_exp() and BN_MONT_CTX_set()
4543 to get the expected BN_FLG_CONSTTIME behavior.
4544 [Bodo Moeller (Google)]
4548 - fixed wrong usage of ioctlsocket() when build for LIBC BSD sockets
4549 - fixed do_tests.pl to run the test suite with CLIB builds too (CLIB_OPT)
4550 - added some more tests to do_tests.pl
4551 - fixed RunningProcess usage so that it works with newer LIBC NDKs too
4552 - removed usage of BN_LLONG for CLIB builds to avoid runtime dependency
4553 - added new Configure targets netware-clib-bsdsock, netware-clib-gcc,
4554 netware-clib-bsdsock-gcc, netware-libc-bsdsock-gcc
4555 - various changes to netware.pl to enable gcc-cross builds on Win32
4557 - changed crypto/bio/b_sock.c to work with macro functions (CLIB BSD)
4558 - various changes to fix missing prototype warnings
4559 - fixed x86nasm.pl to create correct asm files for NASM COFF output
4560 - added AES, WHIRLPOOL and CPUID assembler code to build files
4561 - added missing AES assembler make rules to mk1mf.pl
4562 - fixed order of includes in apps/ocsp.c so that e_os.h settings apply
4563 [Guenter Knauf <eflash@gmx.net>]
4565 *) Implement certificate status request TLS extension defined in RFC3546.
4566 A client can set the appropriate parameters and receive the encoded
4567 OCSP response via a callback. A server can query the supplied parameters
4568 and set the encoded OCSP response in the callback. Add simplified examples
4569 to s_client and s_server.
4572 Changes between 0.9.8f and 0.9.8g [19 Oct 2007]
4574 *) Fix various bugs:
4575 + Binary incompatibility of ssl_ctx_st structure
4576 + DTLS interoperation with non-compliant servers
4577 + Don't call get_session_cb() without proposed session
4578 + Fix ia64 assembler code
4579 [Andy Polyakov, Steve Henson]
4581 Changes between 0.9.8e and 0.9.8f [11 Oct 2007]
4583 *) DTLS Handshake overhaul. There were longstanding issues with
4584 OpenSSL DTLS implementation, which were making it impossible for
4585 RFC 4347 compliant client to communicate with OpenSSL server.
4586 Unfortunately just fixing these incompatibilities would "cut off"
4587 pre-0.9.8f clients. To allow for hassle free upgrade post-0.9.8e
4588 server keeps tolerating non RFC compliant syntax. The opposite is
4589 not true, 0.9.8f client can not communicate with earlier server.
4590 This update even addresses CVE-2007-4995.
4593 *) Changes to avoid need for function casts in OpenSSL: some compilers
4594 (gcc 4.2 and later) reject their use.
4595 [Kurt Roeckx <kurt@roeckx.be>, Peter Hartley <pdh@utter.chaos.org.uk>,
4598 *) Add RFC4507 support to OpenSSL. This includes the corrections in
4599 RFC4507bis. The encrypted ticket format is an encrypted encoded
4600 SSL_SESSION structure, that way new session features are automatically
4603 If a client application caches session in an SSL_SESSION structure
4604 support is transparent because tickets are now stored in the encoded
4607 The SSL_CTX structure automatically generates keys for ticket
4608 protection in servers so again support should be possible
4609 with no application modification.
4611 If a client or server wishes to disable RFC4507 support then the option
4612 SSL_OP_NO_TICKET can be set.
4614 Add a TLS extension debugging callback to allow the contents of any client
4615 or server extensions to be examined.
4617 This work was sponsored by Google.
4620 *) Add initial support for TLS extensions, specifically for the server_name
4621 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
4622 have new members for a host name. The SSL data structure has an
4623 additional member SSL_CTX *initial_ctx so that new sessions can be
4624 stored in that context to allow for session resumption, even after the
4625 SSL has been switched to a new SSL_CTX in reaction to a client's
4626 server_name extension.
4628 New functions (subject to change):
4630 SSL_get_servername()
4631 SSL_get_servername_type()
4634 New CTRL codes and macros (subject to change):
4636 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
4637 - SSL_CTX_set_tlsext_servername_callback()
4638 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
4639 - SSL_CTX_set_tlsext_servername_arg()
4640 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
4642 openssl s_client has a new '-servername ...' option.
4644 openssl s_server has new options '-servername_host ...', '-cert2 ...',
4645 '-key2 ...', '-servername_fatal' (subject to change). This allows
4646 testing the HostName extension for a specific single host name ('-cert'
4647 and '-key' remain fallbacks for handshakes without HostName
4648 negotiation). If the unrecognized_name alert has to be sent, this by
4649 default is a warning; it becomes fatal with the '-servername_fatal'
4652 [Peter Sylvester, Remy Allais, Christophe Renou, Steve Henson]
4654 *) Add AES and SSE2 assembly language support to VC++ build.
4657 *) Mitigate attack on final subtraction in Montgomery reduction.
4660 *) Fix crypto/ec/ec_mult.c to work properly with scalars of value 0
4661 (which previously caused an internal error).
4664 *) Squeeze another 10% out of IGE mode when in != out.
4667 *) AES IGE mode speedup.
4668 [Dean Gaudet (Google)]
4670 *) Add the Korean symmetric 128-bit cipher SEED (see
4671 http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp) and
4672 add SEED ciphersuites from RFC 4162:
4674 TLS_RSA_WITH_SEED_CBC_SHA = "SEED-SHA"
4675 TLS_DHE_DSS_WITH_SEED_CBC_SHA = "DHE-DSS-SEED-SHA"
4676 TLS_DHE_RSA_WITH_SEED_CBC_SHA = "DHE-RSA-SEED-SHA"
4677 TLS_DH_anon_WITH_SEED_CBC_SHA = "ADH-SEED-SHA"
4679 To minimize changes between patchlevels in the OpenSSL 0.9.8
4680 series, SEED remains excluded from compilation unless OpenSSL
4681 is configured with 'enable-seed'.
4682 [KISA, Bodo Moeller]
4684 *) Mitigate branch prediction attacks, which can be practical if a
4685 single processor is shared, allowing a spy process to extract
4686 information. For detailed background information, see
4687 http://eprint.iacr.org/2007/039 (O. Aciicmez, S. Gueron,
4688 J.-P. Seifert, "New Branch Prediction Vulnerabilities in OpenSSL
4689 and Necessary Software Countermeasures"). The core of the change
4690 are new versions BN_div_no_branch() and
4691 BN_mod_inverse_no_branch() of BN_div() and BN_mod_inverse(),
4692 respectively, which are slower, but avoid the security-relevant
4693 conditional branches. These are automatically called by BN_div()
4694 and BN_mod_inverse() if the flag BN_FLG_CONSTTIME is set for one
4695 of the input BIGNUMs. Also, BN_is_bit_set() has been changed to
4696 remove a conditional branch.
4698 BN_FLG_CONSTTIME is the new name for the previous
4699 BN_FLG_EXP_CONSTTIME flag, since it now affects more than just
4700 modular exponentiation. (Since OpenSSL 0.9.7h, setting this flag
4701 in the exponent causes BN_mod_exp_mont() to use the alternative
4702 implementation in BN_mod_exp_mont_consttime().) The old name
4703 remains as a deprecated alias.
4705 Similarly, RSA_FLAG_NO_EXP_CONSTTIME is replaced by a more general
4706 RSA_FLAG_NO_CONSTTIME flag since the RSA implementation now uses
4707 constant-time implementations for more than just exponentiation.
4708 Here too the old name is kept as a deprecated alias.
4710 BN_BLINDING_new() will now use BN_dup() for the modulus so that
4711 the BN_BLINDING structure gets an independent copy of the
4712 modulus. This means that the previous "BIGNUM *m" argument to
4713 BN_BLINDING_new() and to BN_BLINDING_create_param() now
4714 essentially becomes "const BIGNUM *m", although we can't actually
4715 change this in the header file before 0.9.9. It allows
4716 RSA_setup_blinding() to use BN_with_flags() on the modulus to
4717 enable BN_FLG_CONSTTIME.
4719 [Matthew D Wood (Intel Corp)]
4721 *) In the SSL/TLS server implementation, be strict about session ID
4722 context matching (which matters if an application uses a single
4723 external cache for different purposes). Previously,
4724 out-of-context reuse was forbidden only if SSL_VERIFY_PEER was
4725 set. This did ensure strict client verification, but meant that,
4726 with applications using a single external cache for quite
4727 different requirements, clients could circumvent ciphersuite
4728 restrictions for a given session ID context by starting a session
4729 in a different context.
4732 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
4733 a ciphersuite string such as "DEFAULT:RSA" cannot enable
4734 authentication-only ciphersuites.
4737 *) Update the SSL_get_shared_ciphers() fix CVE-2006-3738 which was
4738 not complete and could lead to a possible single byte overflow
4739 (CVE-2007-5135) [Ben Laurie]
4741 Changes between 0.9.8d and 0.9.8e [23 Feb 2007]
4743 *) Since AES128 and AES256 (and similarly Camellia128 and
4744 Camellia256) share a single mask bit in the logic of
4745 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
4746 kludge to work properly if AES128 is available and AES256 isn't
4747 (or if Camellia128 is available and Camellia256 isn't).
4750 *) Fix the BIT STRING encoding generated by crypto/ec/ec_asn1.c
4751 (within i2d_ECPrivateKey, i2d_ECPKParameters, i2d_ECParameters):
4752 When a point or a seed is encoded in a BIT STRING, we need to
4753 prevent the removal of trailing zero bits to get the proper DER
4754 encoding. (By default, crypto/asn1/a_bitstr.c assumes the case
4755 of a NamedBitList, for which trailing 0 bits need to be removed.)
4758 *) Have SSL/TLS server implementation tolerate "mismatched" record
4759 protocol version while receiving ClientHello even if the
4760 ClientHello is fragmented. (The server can't insist on the
4761 particular protocol version it has chosen before the ServerHello
4762 message has informed the client about his choice.)
4765 *) Add RFC 3779 support.
4766 [Rob Austein for ARIN, Ben Laurie]
4768 *) Load error codes if they are not already present instead of using a
4769 static variable. This allows them to be cleanly unloaded and reloaded.
4770 Improve header file function name parsing.
4773 *) extend SMTP and IMAP protocol emulation in s_client to use EHLO
4774 or CAPABILITY handshake as required by RFCs.
4777 Changes between 0.9.8c and 0.9.8d [28 Sep 2006]
4779 *) Introduce limits to prevent malicious keys being able to
4780 cause a denial of service. (CVE-2006-2940)
4781 [Steve Henson, Bodo Moeller]
4783 *) Fix ASN.1 parsing of certain invalid structures that can result
4784 in a denial of service. (CVE-2006-2937) [Steve Henson]
4786 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
4787 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
4789 *) Fix SSL client code which could crash if connecting to a
4790 malicious SSLv2 server. (CVE-2006-4343)
4791 [Tavis Ormandy and Will Drewry, Google Security Team]
4793 *) Since 0.9.8b, ciphersuite strings naming explicit ciphersuites
4794 match only those. Before that, "AES256-SHA" would be interpreted
4795 as a pattern and match "AES128-SHA" too (since AES128-SHA got
4796 the same strength classification in 0.9.7h) as we currently only
4797 have a single AES bit in the ciphersuite description bitmap.
4798 That change, however, also applied to ciphersuite strings such as
4799 "RC4-MD5" that intentionally matched multiple ciphersuites --
4800 namely, SSL 2.0 ciphersuites in addition to the more common ones
4801 from SSL 3.0/TLS 1.0.
4803 So we change the selection algorithm again: Naming an explicit
4804 ciphersuite selects this one ciphersuite, and any other similar
4805 ciphersuite (same bitmap) from *other* protocol versions.
4806 Thus, "RC4-MD5" again will properly select both the SSL 2.0
4807 ciphersuite and the SSL 3.0/TLS 1.0 ciphersuite.
4809 Since SSL 2.0 does not have any ciphersuites for which the
4810 128/256 bit distinction would be relevant, this works for now.
4811 The proper fix will be to use different bits for AES128 and
4812 AES256, which would have avoided the problems from the beginning;
4813 however, bits are scarce, so we can only do this in a new release
4814 (not just a patchlevel) when we can change the SSL_CIPHER
4815 definition to split the single 'unsigned long mask' bitmap into
4816 multiple values to extend the available space.
4820 Changes between 0.9.8b and 0.9.8c [05 Sep 2006]
4822 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
4823 (CVE-2006-4339) [Ben Laurie and Google Security Team]
4825 *) Add AES IGE and biIGE modes.
4828 *) Change the Unix randomness entropy gathering to use poll() when
4829 possible instead of select(), since the latter has some
4830 undesirable limitations.
4831 [Darryl Miles via Richard Levitte and Bodo Moeller]
4833 *) Disable "ECCdraft" ciphersuites more thoroughly. Now special
4834 treatment in ssl/ssl_ciph.s makes sure that these ciphersuites
4835 cannot be implicitly activated as part of, e.g., the "AES" alias.
4836 However, please upgrade to OpenSSL 0.9.9[-dev] for
4837 non-experimental use of the ECC ciphersuites to get TLS extension
4838 support, which is required for curve and point format negotiation
4839 to avoid potential handshake problems.
4842 *) Disable rogue ciphersuites:
4844 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
4845 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
4846 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
4848 The latter two were purportedly from
4849 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
4852 Also deactivate the remaining ciphersuites from
4853 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
4854 unofficial, and the ID has long expired.
4857 *) Fix RSA blinding Heisenbug (problems sometimes occurred on
4858 dual-core machines) and other potential thread-safety issues.
4861 *) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
4862 versions), which is now available for royalty-free use
4863 (see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
4864 Also, add Camellia TLS ciphersuites from RFC 4132.
4866 To minimize changes between patchlevels in the OpenSSL 0.9.8
4867 series, Camellia remains excluded from compilation unless OpenSSL
4868 is configured with 'enable-camellia'.
4871 *) Disable the padding bug check when compression is in use. The padding
4872 bug check assumes the first packet is of even length, this is not
4873 necessarily true if compresssion is enabled and can result in false
4874 positives causing handshake failure. The actual bug test is ancient
4875 code so it is hoped that implementations will either have fixed it by
4876 now or any which still have the bug do not support compression.
4879 Changes between 0.9.8a and 0.9.8b [04 May 2006]
4881 *) When applying a cipher rule check to see if string match is an explicit
4882 cipher suite and only match that one cipher suite if it is.
4885 *) Link in manifests for VC++ if needed.
4886 [Austin Ziegler <halostatue@gmail.com>]
4888 *) Update support for ECC-based TLS ciphersuites according to
4889 draft-ietf-tls-ecc-12.txt with proposed changes (but without
4890 TLS extensions, which are supported starting with the 0.9.9
4891 branch, not in the OpenSSL 0.9.8 branch).
4894 *) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
4895 opaque EVP_CIPHER_CTX handling.
4898 *) Fixes and enhancements to zlib compression code. We now only use
4899 "zlib1.dll" and use the default __cdecl calling convention on Win32
4900 to conform with the standards mentioned here:
4901 http://www.zlib.net/DLL_FAQ.txt
4902 Static zlib linking now works on Windows and the new --with-zlib-include
4903 --with-zlib-lib options to Configure can be used to supply the location
4904 of the headers and library. Gracefully handle case where zlib library
4908 *) Several fixes and enhancements to the OID generation code. The old code
4909 sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
4910 handle numbers larger than ULONG_MAX, truncated printing and had a
4911 non standard OBJ_obj2txt() behaviour.
4914 *) Add support for building of engines under engine/ as shared libraries
4915 under VC++ build system.
4918 *) Corrected the numerous bugs in the Win32 path splitter in DSO.
4919 Hopefully, we will not see any false combination of paths any more.
4922 Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
4924 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
4925 (part of SSL_OP_ALL). This option used to disable the
4926 countermeasure against man-in-the-middle protocol-version
4927 rollback in the SSL 2.0 server implementation, which is a bad
4928 idea. (CVE-2005-2969)
4930 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
4931 for Information Security, National Institute of Advanced Industrial
4932 Science and Technology [AIST], Japan)]
4934 *) Add two function to clear and return the verify parameter flags.
4937 *) Keep cipherlists sorted in the source instead of sorting them at
4938 runtime, thus removing the need for a lock.
4941 *) Avoid some small subgroup attacks in Diffie-Hellman.
4942 [Nick Mathewson and Ben Laurie]
4944 *) Add functions for well-known primes.
4947 *) Extended Windows CE support.
4948 [Satoshi Nakamura and Andy Polyakov]
4950 *) Initialize SSL_METHOD structures at compile time instead of during
4951 runtime, thus removing the need for a lock.
4954 *) Make PKCS7_decrypt() work even if no certificate is supplied by
4955 attempting to decrypt each encrypted key in turn. Add support to
4959 Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
4961 [NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
4964 *) Add libcrypto.pc and libssl.pc for those who feel they need them.
4967 *) Change CA.sh and CA.pl so they don't bundle the CSR and the private
4968 key into the same file any more.
4971 *) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
4974 *) Add -utf8 command line and config file option to 'ca'.
4975 [Stefan <stf@udoma.org]
4977 *) Removed the macro des_crypt(), as it seems to conflict with some
4978 libraries. Use DES_crypt().
4981 *) Correct naming of the 'chil' and '4758cca' ENGINEs. This
4982 involves renaming the source and generated shared-libs for
4983 both. The engines will accept the corrected or legacy ids
4984 ('ncipher' and '4758_cca' respectively) when binding. NB,
4985 this only applies when building 'shared'.
4986 [Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
4988 *) Add attribute functions to EVP_PKEY structure. Modify
4989 PKCS12_create() to recognize a CSP name attribute and
4990 use it. Make -CSP option work again in pkcs12 utility.
4993 *) Add new functionality to the bn blinding code:
4994 - automatic re-creation of the BN_BLINDING parameters after
4995 a fixed number of uses (currently 32)
4996 - add new function for parameter creation
4997 - introduce flags to control the update behaviour of the
4998 BN_BLINDING parameters
4999 - hide BN_BLINDING structure
5000 Add a second BN_BLINDING slot to the RSA structure to improve
5001 performance when a single RSA object is shared among several
5005 *) Add support for DTLS.
5006 [Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
5008 *) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
5009 to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
5012 *) Remove buggy and incomplete DH cert support from
5013 ssl/ssl_rsa.c and ssl/s3_both.c
5016 *) Use SHA-1 instead of MD5 as the default digest algorithm for
5017 the apps/openssl applications.
5020 *) Compile clean with "-Wall -Wmissing-prototypes
5021 -Wstrict-prototypes -Wmissing-declarations -Werror". Currently
5022 DEBUG_SAFESTACK must also be set.
5025 *) Change ./Configure so that certain algorithms can be disabled by default.
5026 The new counterpiece to "no-xxx" is "enable-xxx".
5028 The patented RC5 and MDC2 algorithms will now be disabled unless
5029 "enable-rc5" and "enable-mdc2", respectively, are specified.
5031 (IDEA remains enabled despite being patented. This is because IDEA
5032 is frequently required for interoperability, and there is no license
5033 fee for non-commercial use. As before, "no-idea" can be used to
5034 avoid this algorithm.)
5038 *) Add processing of proxy certificates (see RFC 3820). This work was
5039 sponsored by KTH (The Royal Institute of Technology in Stockholm) and
5040 EGEE (Enabling Grids for E-science in Europe).
5043 *) RC4 performance overhaul on modern architectures/implementations, such
5044 as Intel P4, IA-64 and AMD64.
5047 *) New utility extract-section.pl. This can be used specify an alternative
5048 section number in a pod file instead of having to treat each file as
5049 a separate case in Makefile. This can be done by adding two lines to the
5052 =for comment openssl_section:XXX
5054 The blank line is mandatory.
5058 *) New arguments -certform, -keyform and -pass for s_client and s_server
5059 to allow alternative format key and certificate files and passphrase
5063 *) New structure X509_VERIFY_PARAM which combines current verify parameters,
5064 update associated structures and add various utility functions.
5066 Add new policy related verify parameters, include policy checking in
5067 standard verify code. Enhance 'smime' application with extra parameters
5068 to support policy checking and print out.
5071 *) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
5072 Nehemiah processors. These extensions support AES encryption in hardware
5073 as well as RNG (though RNG support is currently disabled).
5074 [Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
5076 *) Deprecate BN_[get|set]_params() functions (they were ignored internally).
5079 *) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
5080 [Andy Polyakov and a number of other people]
5082 *) Improved PowerPC platform support. Most notably BIGNUM assembler
5083 implementation contributed by IBM.
5084 [Suresh Chari, Peter Waltenberg, Andy Polyakov]
5086 *) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
5087 exponent rather than 'unsigned long'. There is a corresponding change to
5088 the new 'rsa_keygen' element of the RSA_METHOD structure.
5089 [Jelte Jansen, Geoff Thorpe]
5091 *) Functionality for creating the initial serial number file is now
5092 moved from CA.pl to the 'ca' utility with a new option -create_serial.
5094 (Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
5095 number file to 1, which is bound to cause problems. To avoid
5096 the problems while respecting compatibility between different 0.9.7
5097 patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
5098 CA.pl for serial number initialization. With the new release 0.9.8,
5099 we can fix the problem directly in the 'ca' utility.)
5102 *) Reduced header interdepencies by declaring more opaque objects in
5103 ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
5104 give fewer recursive includes, which could break lazy source code - so
5105 this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
5106 developers should define this symbol when building and using openssl to
5107 ensure they track the recommended behaviour, interfaces, [etc], but
5108 backwards-compatible behaviour prevails when this isn't defined.
5111 *) New function X509_POLICY_NODE_print() which prints out policy nodes.
5114 *) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
5115 This will generate a random key of the appropriate length based on the
5116 cipher context. The EVP_CIPHER can provide its own random key generation
5117 routine to support keys of a specific form. This is used in the des and
5118 3des routines to generate a key of the correct parity. Update S/MIME
5119 code to use new functions and hence generate correct parity DES keys.
5120 Add EVP_CHECK_DES_KEY #define to return an error if the key is not
5121 valid (weak or incorrect parity).
5124 *) Add a local set of CRLs that can be used by X509_verify_cert() as well
5125 as looking them up. This is useful when the verified structure may contain
5126 CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
5127 present unless the new PKCS7_NO_CRL flag is asserted.
5130 *) Extend ASN1 oid configuration module. It now additionally accepts the
5133 shortName = some long name, 1.2.3.4
5136 *) Reimplemented the BN_CTX implementation. There is now no more static
5137 limitation on the number of variables it can handle nor the depth of the
5138 "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
5139 information can now expand as required, and rather than having a single
5140 static array of bignums, BN_CTX now uses a linked-list of such arrays
5141 allowing it to expand on demand whilst maintaining the usefulness of
5142 BN_CTX's "bundling".
5145 *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
5146 to allow all RSA operations to function using a single BN_CTX.
5149 *) Preliminary support for certificate policy evaluation and checking. This
5150 is initially intended to pass the tests outlined in "Conformance Testing
5151 of Relying Party Client Certificate Path Processing Logic" v1.07.
5154 *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
5155 remained unused and not that useful. A variety of other little bignum
5156 tweaks and fixes have also been made continuing on from the audit (see
5160 *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
5161 associated ASN1, EVP and SSL functions and old ASN1 macros.
5164 *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
5165 and this should never fail. So the return value from the use of
5166 BN_set_word() (which can fail due to needless expansion) is now deprecated;
5167 if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
5170 *) BN_CTX_get() should return zero-valued bignums, providing the same
5171 initialised value as BN_new().
5172 [Geoff Thorpe, suggested by Ulf Möller]
5174 *) Support for inhibitAnyPolicy certificate extension.
5177 *) An audit of the BIGNUM code is underway, for which debugging code is
5178 enabled when BN_DEBUG is defined. This makes stricter enforcements on what
5179 is considered valid when processing BIGNUMs, and causes execution to
5180 assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
5181 further steps are taken to deliberately pollute unused data in BIGNUM
5182 structures to try and expose faulty code further on. For now, openssl will
5183 (in its default mode of operation) continue to tolerate the inconsistent
5184 forms that it has tolerated in the past, but authors and packagers should
5185 consider trying openssl and their own applications when compiled with
5186 these debugging symbols defined. It will help highlight potential bugs in
5187 their own code, and will improve the test coverage for OpenSSL itself. At
5188 some point, these tighter rules will become openssl's default to improve
5189 maintainability, though the assert()s and other overheads will remain only
5190 in debugging configurations. See bn.h for more details.
5191 [Geoff Thorpe, Nils Larsch, Ulf Möller]
5193 *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
5194 that can only be obtained through BN_CTX_new() (which implicitly
5195 initialises it). The presence of this function only made it possible
5196 to overwrite an existing structure (and cause memory leaks).
5199 *) Because of the callback-based approach for implementing LHASH as a
5200 template type, lh_insert() adds opaque objects to hash-tables and
5201 lh_doall() or lh_doall_arg() are typically used with a destructor callback
5202 to clean up those corresponding objects before destroying the hash table
5203 (and losing the object pointers). So some over-zealous constifications in
5204 LHASH have been relaxed so that lh_insert() does not take (nor store) the
5205 objects as "const" and the lh_doall[_arg] callback wrappers are not
5206 prototyped to have "const" restrictions on the object pointers they are
5207 given (and so aren't required to cast them away any more).
5210 *) The tmdiff.h API was so ugly and minimal that our own timing utility
5211 (speed) prefers to use its own implementation. The two implementations
5212 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
5213 its object type properly exposed (MS_TM) instead of casting to/from "char
5214 *". This may still change yet if someone realises MS_TM and "ms_time_***"
5215 aren't necessarily the greatest nomenclatures - but this is what was used
5216 internally to the implementation so I've used that for now.
5219 *) Ensure that deprecated functions do not get compiled when
5220 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
5221 the self-tests were still using deprecated key-generation functions so
5222 these have been updated also.
5225 *) Reorganise PKCS#7 code to separate the digest location functionality
5226 into PKCS7_find_digest(), digest addition into PKCS7_bio_add_digest().
5227 New function PKCS7_set_digest() to set the digest type for PKCS#7
5228 digestedData type. Add additional code to correctly generate the
5229 digestedData type and add support for this type in PKCS7 initialization
5233 *) New function PKCS7_set0_type_other() this initializes a PKCS7
5234 structure of type "other".
5237 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
5238 sure the loop does correctly stop and breaking ("division by zero")
5239 modulus operations are not performed. The (pre-generated) prime
5240 table crypto/bn/bn_prime.h was already correct, but it could not be
5241 re-generated on some platforms because of the "division by zero"
5242 situation in the script.
5243 [Ralf S. Engelschall]
5245 *) Update support for ECC-based TLS ciphersuites according to
5246 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
5247 SHA-1 now is only used for "small" curves (where the
5248 representation of a field element takes up to 24 bytes); for
5249 larger curves, the field element resulting from ECDH is directly
5250 used as premaster secret.
5251 [Douglas Stebila (Sun Microsystems Laboratories)]
5253 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
5254 curve secp160r1 to the tests.
5255 [Douglas Stebila (Sun Microsystems Laboratories)]
5257 *) Add the possibility to load symbols globally with DSO.
5258 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
5260 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
5261 control of the error stack.
5264 *) Add support for STORE in ENGINE.
5267 *) Add the STORE type. The intention is to provide a common interface
5268 to certificate and key stores, be they simple file-based stores, or
5269 HSM-type store, or LDAP stores, or...
5270 NOTE: The code is currently UNTESTED and isn't really used anywhere.
5273 *) Add a generic structure called OPENSSL_ITEM. This can be used to
5274 pass a list of arguments to any function as well as provide a way
5275 for a function to pass data back to the caller.
5278 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
5279 works like BUF_strdup() but can be used to duplicate a portion of
5280 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
5284 *) Add the function sk_find_ex() which works like sk_find(), but will
5285 return an index to an element even if an exact match couldn't be
5286 found. The index is guaranteed to point at the element where the
5287 searched-for key would be inserted to preserve sorting order.
5290 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
5291 takes an extra flags argument for optional functionality. Currently,
5292 the following flags are defined:
5294 OBJ_BSEARCH_VALUE_ON_NOMATCH
5295 This one gets OBJ_bsearch_ex() to return a pointer to the first
5296 element where the comparing function returns a negative or zero
5299 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
5300 This one gets OBJ_bsearch_ex() to return a pointer to the first
5301 element where the comparing function returns zero. This is useful
5302 if there are more than one element where the comparing function
5306 *) Make it possible to create self-signed certificates with 'openssl ca'
5307 in such a way that the self-signed certificate becomes part of the
5308 CA database and uses the same mechanisms for serial number generation
5309 as all other certificate signing. The new flag '-selfsign' enables
5310 this functionality. Adapt CA.sh and CA.pl.in.
5313 *) Add functionality to check the public key of a certificate request
5314 against a given private. This is useful to check that a certificate
5315 request can be signed by that key (self-signing).
5318 *) Make it possible to have multiple active certificates with the same
5319 subject in the CA index file. This is done only if the keyword
5320 'unique_subject' is set to 'no' in the main CA section (default
5321 if 'CA_default') of the configuration file. The value is saved
5322 with the database itself in a separate index attribute file,
5323 named like the index file with '.attr' appended to the name.
5326 *) Generate muti valued AVAs using '+' notation in config files for
5330 *) Support for nameConstraints certificate extension.
5333 *) Support for policyConstraints certificate extension.
5336 *) Support for policyMappings certificate extension.
5339 *) Make sure the default DSA_METHOD implementation only uses its
5340 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
5341 and change its own handlers to be NULL so as to remove unnecessary
5342 indirection. This lets alternative implementations fallback to the
5343 default implementation more easily.
5346 *) Support for directoryName in GeneralName related extensions
5350 *) Make it possible to link applications using Makefile.shared.
5351 Make that possible even when linking against static libraries!
5354 *) Support for single pass processing for S/MIME signing. This now
5355 means that S/MIME signing can be done from a pipe, in addition
5356 cleartext signing (multipart/signed type) is effectively streaming
5357 and the signed data does not need to be all held in memory.
5359 This is done with a new flag PKCS7_STREAM. When this flag is set
5360 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
5361 is done after the data is output (and digests calculated) in
5362 SMIME_write_PKCS7().
5365 *) Add full support for -rpath/-R, both in shared libraries and
5366 applications, at least on the platforms where it's known how
5370 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
5371 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
5372 will now compute a table of multiples of the generator that
5373 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
5374 faster (notably in the case of a single point multiplication,
5375 scalar * generator).
5376 [Nils Larsch, Bodo Moeller]
5378 *) IPv6 support for certificate extensions. The various extensions
5379 which use the IP:a.b.c.d can now take IPv6 addresses using the
5380 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
5384 *) Added an ENGINE that implements RSA by performing private key
5385 exponentiations with the GMP library. The conversions to and from
5386 GMP's mpz_t format aren't optimised nor are any montgomery forms
5387 cached, and on x86 it appears OpenSSL's own performance has caught up.
5388 However there are likely to be other architectures where GMP could
5389 provide a boost. This ENGINE is not built in by default, but it can be
5390 specified at Configure time and should be accompanied by the necessary
5391 linker additions, eg;
5392 ./config -DOPENSSL_USE_GMP -lgmp
5395 *) "openssl engine" will not display ENGINE/DSO load failure errors when
5396 testing availability of engines with "-t" - the old behaviour is
5397 produced by increasing the feature's verbosity with "-tt".
5400 *) ECDSA routines: under certain error conditions uninitialized BN objects
5401 could be freed. Solution: make sure initialization is performed early
5402 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
5406 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
5407 and DH_METHOD (eg. by ENGINE implementations) to override the normal
5408 software implementations. For DSA and DH, parameter generation can
5409 also be overridden by providing the appropriate method callbacks.
5412 *) Change the "progress" mechanism used in key-generation and
5413 primality testing to functions that take a new BN_GENCB pointer in
5414 place of callback/argument pairs. The new API functions have "_ex"
5415 postfixes and the older functions are reimplemented as wrappers for
5416 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
5417 declarations of the old functions to help (graceful) attempts to
5418 migrate to the new functions. Also, the new key-generation API
5419 functions operate on a caller-supplied key-structure and return
5420 success/failure rather than returning a key or NULL - this is to
5421 help make "keygen" another member function of RSA_METHOD etc.
5423 Example for using the new callback interface:
5425 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
5429 BN_GENCB_set(&my_cb, my_callback, my_arg);
5431 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
5432 /* For the meaning of a, b in calls to my_callback(), see the
5433 * documentation of the function that calls the callback.
5434 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
5435 * my_callback should return 1 if it wants BN_is_prime_ex()
5436 * to continue, or 0 to stop.
5441 *) Change the ZLIB compression method to be stateful, and make it
5442 available to TLS with the number defined in
5443 draft-ietf-tls-compression-04.txt.
5446 *) Add the ASN.1 structures and functions for CertificatePair, which
5447 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
5449 CertificatePair ::= SEQUENCE {
5450 forward [0] Certificate OPTIONAL,
5451 reverse [1] Certificate OPTIONAL,
5452 -- at least one of the pair shall be present -- }
5454 Also implement the PEM functions to read and write certificate
5455 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
5457 This needed to be defined, mostly for the sake of the LDAP
5458 attribute crossCertificatePair, but may prove useful elsewhere as
5462 *) Make it possible to inhibit symlinking of shared libraries in
5463 Makefile.shared, for Cygwin's sake.
5466 *) Extend the BIGNUM API by creating a function
5467 void BN_set_negative(BIGNUM *a, int neg);
5468 and a macro that behave like
5469 int BN_is_negative(const BIGNUM *a);
5471 to avoid the need to access 'a->neg' directly in applications.
5474 *) Implement fast modular reduction for pseudo-Mersenne primes
5475 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
5476 EC_GROUP_new_curve_GFp() will now automatically use this
5478 [Nils Larsch <nla@trustcenter.de>]
5480 *) Add new lock type (CRYPTO_LOCK_BN).
5483 *) Change the ENGINE framework to automatically load engines
5484 dynamically from specific directories unless they could be
5485 found to already be built in or loaded. Move all the
5486 current engines except for the cryptodev one to a new
5488 The engines in engines/ are built as shared libraries if
5489 the "shared" options was given to ./Configure or ./config.
5490 Otherwise, they are inserted in libcrypto.a.
5491 /usr/local/ssl/engines is the default directory for dynamic
5492 engines, but that can be overridden at configure time through
5493 the usual use of --prefix and/or --openssldir, and at run
5494 time with the environment variable OPENSSL_ENGINES.
5495 [Geoff Thorpe and Richard Levitte]
5497 *) Add Makefile.shared, a helper makefile to build shared
5498 libraries. Adapt Makefile.org.
5501 *) Add version info to Win32 DLLs.
5502 [Peter 'Luna' Runestig" <peter@runestig.com>]
5504 *) Add new 'medium level' PKCS#12 API. Certificates and keys
5505 can be added using this API to created arbitrary PKCS#12
5506 files while avoiding the low level API.
5508 New options to PKCS12_create(), key or cert can be NULL and
5509 will then be omitted from the output file. The encryption
5510 algorithm NIDs can be set to -1 for no encryption, the mac
5511 iteration count can be set to 0 to omit the mac.
5513 Enhance pkcs12 utility by making the -nokeys and -nocerts
5514 options work when creating a PKCS#12 file. New option -nomac
5515 to omit the mac, NONE can be set for an encryption algorithm.
5516 New code is modified to use the enhanced PKCS12_create()
5517 instead of the low level API.
5520 *) Extend ASN1 encoder to support indefinite length constructed
5521 encoding. This can output sequences tags and octet strings in
5522 this form. Modify pk7_asn1.c to support indefinite length
5523 encoding. This is experimental and needs additional code to
5524 be useful, such as an ASN1 bio and some enhanced streaming
5527 Extend template encode functionality so that tagging is passed
5528 down to the template encoder.
5531 *) Let 'openssl req' fail if an argument to '-newkey' is not
5532 recognized instead of using RSA as a default.
5535 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
5536 As these are not official, they are not included in "ALL";
5537 the "ECCdraft" ciphersuite group alias can be used to select them.
5538 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
5540 *) Add ECDH engine support.
5541 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
5543 *) Add ECDH in new directory crypto/ecdh/.
5544 [Douglas Stebila (Sun Microsystems Laboratories)]
5546 *) Let BN_rand_range() abort with an error after 100 iterations
5547 without success (which indicates a broken PRNG).
5550 *) Change BN_mod_sqrt() so that it verifies that the input value
5551 is really the square of the return value. (Previously,
5552 BN_mod_sqrt would show GIGO behaviour.)
5555 *) Add named elliptic curves over binary fields from X9.62, SECG,
5556 and WAP/WTLS; add OIDs that were still missing.
5558 [Sheueling Chang Shantz and Douglas Stebila
5559 (Sun Microsystems Laboratories)]
5561 *) Extend the EC library for elliptic curves over binary fields
5562 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
5565 EC_GF2m_simple_method
5569 EC_GROUP_new_curve_GF2m
5570 EC_GROUP_set_curve_GF2m
5571 EC_GROUP_get_curve_GF2m
5572 EC_POINT_set_affine_coordinates_GF2m
5573 EC_POINT_get_affine_coordinates_GF2m
5574 EC_POINT_set_compressed_coordinates_GF2m
5576 Point compression for binary fields is disabled by default for
5577 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
5580 As binary polynomials are represented as BIGNUMs, various members
5581 of the EC_GROUP and EC_POINT data structures can be shared
5582 between the implementations for prime fields and binary fields;
5583 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
5584 are essentially identical to their ..._GFp counterparts.
5585 (For simplicity, the '..._GFp' prefix has been dropped from
5586 various internal method names.)
5588 An internal 'field_div' method (similar to 'field_mul' and
5589 'field_sqr') has been added; this is used only for binary fields.
5591 [Sheueling Chang Shantz and Douglas Stebila
5592 (Sun Microsystems Laboratories)]
5594 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
5595 through methods ('mul', 'precompute_mult').
5597 The generic implementations (now internally called 'ec_wNAF_mul'
5598 and 'ec_wNAF_precomputed_mult') remain the default if these
5599 methods are undefined.
5601 [Sheueling Chang Shantz and Douglas Stebila
5602 (Sun Microsystems Laboratories)]
5604 *) New function EC_GROUP_get_degree, which is defined through
5605 EC_METHOD. For curves over prime fields, this returns the bit
5606 length of the modulus.
5608 [Sheueling Chang Shantz and Douglas Stebila
5609 (Sun Microsystems Laboratories)]
5611 *) New functions EC_GROUP_dup, EC_POINT_dup.
5612 (These simply call ..._new and ..._copy).
5614 [Sheueling Chang Shantz and Douglas Stebila
5615 (Sun Microsystems Laboratories)]
5617 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
5618 Polynomials are represented as BIGNUMs (where the sign bit is not
5619 used) in the following functions [macros]:
5622 BN_GF2m_sub [= BN_GF2m_add]
5623 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
5624 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
5625 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
5627 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
5628 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
5629 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
5630 BN_GF2m_cmp [= BN_ucmp]
5632 (Note that only the 'mod' functions are actually for fields GF(2^m).
5633 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
5635 For some functions, an the irreducible polynomial defining a
5636 field can be given as an 'unsigned int[]' with strictly
5637 decreasing elements giving the indices of those bits that are set;
5638 i.e., p[] represents the polynomial
5639 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
5641 p[0] > p[1] > ... > p[k] = 0.
5642 This applies to the following functions:
5647 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
5648 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
5650 BN_GF2m_mod_sqrt_arr
5651 BN_GF2m_mod_solve_quad_arr
5655 Conversion can be performed by the following functions:
5660 bntest.c has additional tests for binary polynomial arithmetic.
5662 Two implementations for BN_GF2m_mod_div() are available.
5663 The default algorithm simply uses BN_GF2m_mod_inv() and
5664 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
5665 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
5666 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
5668 [Sheueling Chang Shantz and Douglas Stebila
5669 (Sun Microsystems Laboratories)]
5671 *) Add new error code 'ERR_R_DISABLED' that can be used when some
5672 functionality is disabled at compile-time.
5673 [Douglas Stebila <douglas.stebila@sun.com>]
5675 *) Change default behaviour of 'openssl asn1parse' so that more
5676 information is visible when viewing, e.g., a certificate:
5678 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
5679 mode the content of non-printable OCTET STRINGs is output in a
5680 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
5681 avoid the appearance of a printable string.
5682 [Nils Larsch <nla@trustcenter.de>]
5684 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
5686 EC_GROUP_set_asn1_flag()
5687 EC_GROUP_get_asn1_flag()
5688 EC_GROUP_set_point_conversion_form()
5689 EC_GROUP_get_point_conversion_form()
5690 These control ASN1 encoding details:
5691 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
5692 has been set to OPENSSL_EC_NAMED_CURVE.
5693 - Points are encoded in uncompressed form by default; options for
5694 asn1_for are as for point2oct, namely
5695 POINT_CONVERSION_COMPRESSED
5696 POINT_CONVERSION_UNCOMPRESSED
5697 POINT_CONVERSION_HYBRID
5699 Also add 'seed' and 'seed_len' members to EC_GROUP with access
5702 EC_GROUP_get0_seed()
5703 EC_GROUP_get_seed_len()
5704 This is used only for ASN1 purposes (so far).
5705 [Nils Larsch <nla@trustcenter.de>]
5707 *) Add 'field_type' member to EC_METHOD, which holds the NID
5708 of the appropriate field type OID. The new function
5709 EC_METHOD_get_field_type() returns this value.
5710 [Nils Larsch <nla@trustcenter.de>]
5715 EC_POINT_point2hex()
5716 EC_POINT_hex2point()
5717 providing useful interfaces to EC_POINT_point2oct() and
5718 EC_POINT_oct2point().
5719 [Nils Larsch <nla@trustcenter.de>]
5721 *) Change internals of the EC library so that the functions
5722 EC_GROUP_set_generator()
5723 EC_GROUP_get_generator()
5724 EC_GROUP_get_order()
5725 EC_GROUP_get_cofactor()
5726 are implemented directly in crypto/ec/ec_lib.c and not dispatched
5727 to methods, which would lead to unnecessary code duplication when
5728 adding different types of curves.
5729 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
5731 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
5732 arithmetic, and such that modified wNAFs are generated
5733 (which avoid length expansion in many cases).
5736 *) Add a function EC_GROUP_check_discriminant() (defined via
5737 EC_METHOD) that verifies that the curve discriminant is non-zero.
5739 Add a function EC_GROUP_check() that makes some sanity tests
5740 on a EC_GROUP, its generator and order. This includes
5741 EC_GROUP_check_discriminant().
5742 [Nils Larsch <nla@trustcenter.de>]
5744 *) Add ECDSA in new directory crypto/ecdsa/.
5746 Add applications 'openssl ecparam' and 'openssl ecdsa'
5747 (these are based on 'openssl dsaparam' and 'openssl dsa').
5749 ECDSA support is also included in various other files across the
5750 library. Most notably,
5751 - 'openssl req' now has a '-newkey ecdsa:file' option;
5752 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
5753 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
5754 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
5755 them suitable for ECDSA where domain parameters must be
5756 extracted before the specific public key;
5757 - ECDSA engine support has been added.
5758 [Nils Larsch <nla@trustcenter.de>]
5760 *) Include some named elliptic curves, and add OIDs from X9.62,
5761 SECG, and WAP/WTLS. Each curve can be obtained from the new
5763 EC_GROUP_new_by_curve_name(),
5764 and the list of available named curves can be obtained with
5765 EC_get_builtin_curves().
5766 Also add a 'curve_name' member to EC_GROUP objects, which can be
5768 EC_GROUP_set_curve_name()
5769 EC_GROUP_get_curve_name()
5770 [Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
5772 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
5773 was actually never needed) and in BN_mul(). The removal in BN_mul()
5774 required a small change in bn_mul_part_recursive() and the addition
5775 of the functions bn_cmp_part_words(), bn_sub_part_words() and
5776 bn_add_part_words(), which do the same thing as bn_cmp_words(),
5777 bn_sub_words() and bn_add_words() except they take arrays with
5781 Changes between 0.9.7l and 0.9.7m [23 Feb 2007]
5783 *) Cleanse PEM buffers before freeing them since they may contain
5785 [Benjamin Bennett <ben@psc.edu>]
5787 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
5788 a ciphersuite string such as "DEFAULT:RSA" cannot enable
5789 authentication-only ciphersuites.
5792 *) Since AES128 and AES256 share a single mask bit in the logic of
5793 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
5794 kludge to work properly if AES128 is available and AES256 isn't.
5797 *) Expand security boundary to match 1.1.1 module.
5800 *) Remove redundant features: hash file source, editing of test vectors
5801 modify fipsld to use external fips_premain.c signature.
5804 *) New perl script mkfipsscr.pl to create shell scripts or batch files to
5805 run algorithm test programs.
5808 *) Make algorithm test programs more tolerant of whitespace.
5811 *) Have SSL/TLS server implementation tolerate "mismatched" record
5812 protocol version while receiving ClientHello even if the
5813 ClientHello is fragmented. (The server can't insist on the
5814 particular protocol version it has chosen before the ServerHello
5815 message has informed the client about his choice.)
5818 *) Load error codes if they are not already present instead of using a
5819 static variable. This allows them to be cleanly unloaded and reloaded.
5822 Changes between 0.9.7k and 0.9.7l [28 Sep 2006]
5824 *) Introduce limits to prevent malicious keys being able to
5825 cause a denial of service. (CVE-2006-2940)
5826 [Steve Henson, Bodo Moeller]
5828 *) Fix ASN.1 parsing of certain invalid structures that can result
5829 in a denial of service. (CVE-2006-2937) [Steve Henson]
5831 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
5832 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
5834 *) Fix SSL client code which could crash if connecting to a
5835 malicious SSLv2 server. (CVE-2006-4343)
5836 [Tavis Ormandy and Will Drewry, Google Security Team]
5838 *) Change ciphersuite string processing so that an explicit
5839 ciphersuite selects this one ciphersuite (so that "AES256-SHA"
5840 will no longer include "AES128-SHA"), and any other similar
5841 ciphersuite (same bitmap) from *other* protocol versions (so that
5842 "RC4-MD5" will still include both the SSL 2.0 ciphersuite and the
5843 SSL 3.0/TLS 1.0 ciphersuite). This is a backport combining
5844 changes from 0.9.8b and 0.9.8d.
5847 Changes between 0.9.7j and 0.9.7k [05 Sep 2006]
5849 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
5850 (CVE-2006-4339) [Ben Laurie and Google Security Team]
5852 *) Change the Unix randomness entropy gathering to use poll() when
5853 possible instead of select(), since the latter has some
5854 undesirable limitations.
5855 [Darryl Miles via Richard Levitte and Bodo Moeller]
5857 *) Disable rogue ciphersuites:
5859 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
5860 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
5861 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
5863 The latter two were purportedly from
5864 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
5867 Also deactive the remaining ciphersuites from
5868 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
5869 unofficial, and the ID has long expired.
5872 *) Fix RSA blinding Heisenbug (problems sometimes occurred on
5873 dual-core machines) and other potential thread-safety issues.
5876 Changes between 0.9.7i and 0.9.7j [04 May 2006]
5878 *) Adapt fipsld and the build system to link against the validated FIPS
5879 module in FIPS mode.
5882 *) Fixes for VC++ 2005 build under Windows.
5885 *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
5886 from a Windows bash shell such as MSYS. It is autodetected from the
5887 "config" script when run from a VC++ environment. Modify standard VC++
5888 build to use fipscanister.o from the GNU make build.
5891 Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
5893 *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
5894 The value now differs depending on if you build for FIPS or not.
5895 BEWARE! A program linked with a shared FIPSed libcrypto can't be
5896 safely run with a non-FIPSed libcrypto, as it may crash because of
5897 the difference induced by this change.
5900 Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
5902 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
5903 (part of SSL_OP_ALL). This option used to disable the
5904 countermeasure against man-in-the-middle protocol-version
5905 rollback in the SSL 2.0 server implementation, which is a bad
5906 idea. (CVE-2005-2969)
5908 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
5909 for Information Security, National Institute of Advanced Industrial
5910 Science and Technology [AIST], Japan)]
5912 *) Minimal support for X9.31 signatures and PSS padding modes. This is
5913 mainly for FIPS compliance and not fully integrated at this stage.
5916 *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
5917 the exponentiation using a fixed-length exponent. (Otherwise,
5918 the information leaked through timing could expose the secret key
5919 after many signatures; cf. Bleichenbacher's attack on DSA with
5923 *) Make a new fixed-window mod_exp implementation the default for
5924 RSA, DSA, and DH private-key operations so that the sequence of
5925 squares and multiplies and the memory access pattern are
5926 independent of the particular secret key. This will mitigate
5927 cache-timing and potential related attacks.
5929 BN_mod_exp_mont_consttime() is the new exponentiation implementation,
5930 and this is automatically used by BN_mod_exp_mont() if the new flag
5931 BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
5932 will use this BN flag for private exponents unless the flag
5933 RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
5934 DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
5936 [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
5938 *) Change the client implementation for SSLv23_method() and
5939 SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
5940 Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
5941 (Previously, the SSL 2.0 backwards compatible Client Hello
5942 message format would be used even with SSL_OP_NO_SSLv2.)
5945 *) Add support for smime-type MIME parameter in S/MIME messages which some
5949 *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
5950 a threadsafe manner. Modify rsa code to use new function and add calls
5951 to dsa and dh code (which had race conditions before).
5954 *) Include the fixed error library code in the C error file definitions
5955 instead of fixing them up at runtime. This keeps the error code
5956 structures constant.
5959 Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
5961 [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
5964 *) Fixes for newer kerberos headers. NB: the casts are needed because
5965 the 'length' field is signed on one version and unsigned on another
5966 with no (?) obvious way to tell the difference, without these VC++
5967 complains. Also the "definition" of FAR (blank) is no longer included
5968 nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
5969 some needed definitions.
5972 *) Undo Cygwin change.
5975 *) Added support for proxy certificates according to RFC 3820.
5976 Because they may be a security thread to unaware applications,
5977 they must be explicitly allowed in run-time. See
5978 docs/HOWTO/proxy_certificates.txt for further information.
5981 Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
5983 *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
5984 server and client random values. Previously
5985 (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
5986 less random data when sizeof(time_t) > 4 (some 64 bit platforms).
5988 This change has negligible security impact because:
5990 1. Server and client random values still have 24 bytes of pseudo random
5993 2. Server and client random values are sent in the clear in the initial
5996 3. The master secret is derived using the premaster secret (48 bytes in
5997 size for static RSA ciphersuites) as well as client server and random
6000 The OpenSSL team would like to thank the UK NISCC for bringing this issue
6003 [Stephen Henson, reported by UK NISCC]
6005 *) Use Windows randomness collection on Cygwin.
6008 *) Fix hang in EGD/PRNGD query when communication socket is closed
6009 prematurely by EGD/PRNGD.
6010 [Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
6012 *) Prompt for pass phrases when appropriate for PKCS12 input format.
6015 *) Back-port of selected performance improvements from development
6016 branch, as well as improved support for PowerPC platforms.
6019 *) Add lots of checks for memory allocation failure, error codes to indicate
6020 failure and freeing up memory if a failure occurs.
6021 [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
6023 *) Add new -passin argument to dgst.
6026 *) Perform some character comparisons of different types in X509_NAME_cmp:
6027 this is needed for some certificates that re-encode DNs into UTF8Strings
6028 (in violation of RFC3280) and can't or won't issue name rollover
6032 *) Make an explicit check during certificate validation to see that
6033 the CA setting in each certificate on the chain is correct. As a
6034 side effect always do the following basic checks on extensions,
6035 not just when there's an associated purpose to the check:
6037 - if there is an unhandled critical extension (unless the user
6038 has chosen to ignore this fault)
6039 - if the path length has been exceeded (if one is set at all)
6040 - that certain extensions fit the associated purpose (if one has
6044 Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
6046 *) Avoid a race condition when CRLs are checked in a multi threaded
6047 environment. This would happen due to the reordering of the revoked
6048 entries during signature checking and serial number lookup. Now the
6049 encoding is cached and the serial number sort performed under a lock.
6050 Add new STACK function sk_is_sorted().
6053 *) Add Delta CRL to the extension code.
6056 *) Various fixes to s3_pkt.c so alerts are sent properly.
6057 [David Holmes <d.holmes@f5.com>]
6059 *) Reduce the chances of duplicate issuer name and serial numbers (in
6060 violation of RFC3280) using the OpenSSL certificate creation utilities.
6061 This is done by creating a random 64 bit value for the initial serial
6062 number when a serial number file is created or when a self signed
6063 certificate is created using 'openssl req -x509'. The initial serial
6064 number file is created using 'openssl x509 -next_serial' in CA.pl
6065 rather than being initialized to 1.
6068 Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
6070 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
6071 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
6072 [Joe Orton, Steve Henson]
6074 *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
6076 [Joe Orton, Steve Henson]
6078 *) Make it possible to have multiple active certificates with the same
6079 subject in the CA index file. This is done only if the keyword
6080 'unique_subject' is set to 'no' in the main CA section (default
6081 if 'CA_default') of the configuration file. The value is saved
6082 with the database itself in a separate index attribute file,
6083 named like the index file with '.attr' appended to the name.
6086 *) X509 verify fixes. Disable broken certificate workarounds when
6087 X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
6088 keyUsage extension present. Don't accept CRLs with unhandled critical
6089 extensions: since verify currently doesn't process CRL extensions this
6090 rejects a CRL with *any* critical extensions. Add new verify error codes
6094 *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
6095 A clarification of RFC2560 will require the use of OCTET STRINGs and
6096 some implementations cannot handle the current raw format. Since OpenSSL
6097 copies and compares OCSP nonces as opaque blobs without any attempt at
6098 parsing them this should not create any compatibility issues.
6101 *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
6102 calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
6103 this HMAC (and other) operations are several times slower than OpenSSL
6107 *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
6108 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
6110 *) Use the correct content when signing type "other".
6113 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
6115 *) Fix various bugs revealed by running the NISCC test suite:
6117 Stop out of bounds reads in the ASN1 code when presented with
6118 invalid tags (CVE-2003-0543 and CVE-2003-0544).
6120 Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
6122 If verify callback ignores invalid public key errors don't try to check
6123 certificate signature with the NULL public key.
6127 *) New -ignore_err option in ocsp application to stop the server
6128 exiting on the first error in a request.
6131 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
6132 if the server requested one: as stated in TLS 1.0 and SSL 3.0
6136 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
6137 extra data after the compression methods not only for TLS 1.0
6138 but also for SSL 3.0 (as required by the specification).
6139 [Bodo Moeller; problem pointed out by Matthias Loepfe]
6141 *) Change X509_certificate_type() to mark the key as exported/exportable
6142 when it's 512 *bits* long, not 512 bytes.
6145 *) Change AES_cbc_encrypt() so it outputs exact multiple of
6146 blocks during encryption.
6149 *) Various fixes to base64 BIO and non blocking I/O. On write
6150 flushes were not handled properly if the BIO retried. On read
6151 data was not being buffered properly and had various logic bugs.
6152 This also affects blocking I/O when the data being decoded is a
6156 *) Various S/MIME bugfixes and compatibility changes:
6157 output correct application/pkcs7 MIME type if
6158 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
6159 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
6160 of files as .eml work). Correctly handle very long lines in MIME
6164 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
6166 *) Countermeasure against the Klima-Pokorny-Rosa extension of
6167 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
6168 a protocol version number mismatch like a decryption error
6169 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
6172 *) Turn on RSA blinding by default in the default implementation
6173 to avoid a timing attack. Applications that don't want it can call
6174 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
6175 They would be ill-advised to do so in most cases.
6176 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
6178 *) Change RSA blinding code so that it works when the PRNG is not
6179 seeded (in this case, the secret RSA exponent is abused as
6180 an unpredictable seed -- if it is not unpredictable, there
6181 is no point in blinding anyway). Make RSA blinding thread-safe
6182 by remembering the creator's thread ID in rsa->blinding and
6183 having all other threads use local one-time blinding factors
6184 (this requires more computation than sharing rsa->blinding, but
6185 avoids excessive locking; and if an RSA object is not shared
6186 between threads, blinding will still be very fast).
6189 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
6190 ENGINE as defaults for all supported algorithms irrespective of
6191 the 'flags' parameter. 'flags' is now honoured, so applications
6192 should make sure they are passing it correctly.
6195 *) Target "mingw" now allows native Windows code to be generated in
6196 the Cygwin environment as well as with the MinGW compiler.
6199 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
6201 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
6202 via timing by performing a MAC computation even if incorrect
6203 block cipher padding has been found. This is a countermeasure
6204 against active attacks where the attacker has to distinguish
6205 between bad padding and a MAC verification error. (CVE-2003-0078)
6207 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
6208 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
6209 Martin Vuagnoux (EPFL, Ilion)]
6211 *) Make the no-err option work as intended. The intention with no-err
6212 is not to have the whole error stack handling routines removed from
6213 libcrypto, it's only intended to remove all the function name and
6214 reason texts, thereby removing some of the footprint that may not
6215 be interesting if those errors aren't displayed anyway.
6217 NOTE: it's still possible for any application or module to have it's
6218 own set of error texts inserted. The routines are there, just not
6219 used by default when no-err is given.
6222 *) Add support for FreeBSD on IA64.
6223 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
6225 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
6226 Kerberos function mit_des_cbc_cksum(). Before this change,
6227 the value returned by DES_cbc_cksum() was like the one from
6228 mit_des_cbc_cksum(), except the bytes were swapped.
6229 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
6231 *) Allow an application to disable the automatic SSL chain building.
6232 Before this a rather primitive chain build was always performed in
6233 ssl3_output_cert_chain(): an application had no way to send the
6234 correct chain if the automatic operation produced an incorrect result.
6236 Now the chain builder is disabled if either:
6238 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
6240 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
6242 The reasoning behind this is that an application would not want the
6243 auto chain building to take place if extra chain certificates are
6244 present and it might also want a means of sending no additional
6245 certificates (for example the chain has two certificates and the
6249 *) Add the possibility to build without the ENGINE framework.
6250 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
6252 *) Under Win32 gmtime() can return NULL: check return value in
6253 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
6256 *) DSA routines: under certain error conditions uninitialized BN objects
6257 could be freed. Solution: make sure initialization is performed early
6258 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
6259 Nils Larsch <nla@trustcenter.de> via PR#459)
6262 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
6263 checked on reconnect on the client side, therefore session resumption
6264 could still fail with a "ssl session id is different" error. This
6265 behaviour is masked when SSL_OP_ALL is used due to
6266 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
6267 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
6268 followup to PR #377.
6271 *) IA-32 assembler support enhancements: unified ELF targets, support
6272 for SCO/Caldera platforms, fix for Cygwin shared build.
6275 *) Add support for FreeBSD on sparc64. As a consequence, support for
6276 FreeBSD on non-x86 processors is separate from x86 processors on
6277 the config script, much like the NetBSD support.
6278 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
6280 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
6282 [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
6285 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
6286 code (06) was taken as the first octet of the session ID and the last
6287 octet was ignored consequently. As a result SSLv2 client side session
6288 caching could not have worked due to the session ID mismatch between
6290 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
6294 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
6295 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
6299 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
6300 seems that in spite of existing for more than a year, many application
6301 author have done nothing to provide the necessary callbacks, which
6302 means that this particular engine will not work properly anywhere.
6303 This is a very unfortunate situation which forces us, in the name
6304 of usability, to give the hw_ncipher.c a static lock, which is part
6306 NOTE: This is for the 0.9.7 series ONLY. This hack will never
6307 appear in 0.9.8 or later. We EXPECT application authors to have
6308 dealt properly with this when 0.9.8 is released (unless we actually
6309 make such changes in the libcrypto locking code that changes will
6310 have to be made anyway).
6313 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
6314 octets have been read, EOF or an error occurs. Without this change
6315 some truncated ASN1 structures will not produce an error.
6318 *) Disable Heimdal support, since it hasn't been fully implemented.
6319 Still give the possibility to force the use of Heimdal, but with
6320 warnings and a request that patches get sent to openssl-dev.
6323 *) Add the VC-CE target, introduce the WINCE sysname, and add
6324 INSTALL.WCE and appropriate conditionals to make it build.
6325 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
6327 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
6328 cygssl-x.y.z.dll, where x, y and z are the major, minor and
6329 edit numbers of the version.
6330 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
6332 *) Introduce safe string copy and catenation functions
6333 (BUF_strlcpy() and BUF_strlcat()).
6334 [Ben Laurie (CHATS) and Richard Levitte]
6336 *) Avoid using fixed-size buffers for one-line DNs.
6337 [Ben Laurie (CHATS)]
6339 *) Add BUF_MEM_grow_clean() to avoid information leakage when
6340 resizing buffers containing secrets, and use where appropriate.
6341 [Ben Laurie (CHATS)]
6343 *) Avoid using fixed size buffers for configuration file location.
6344 [Ben Laurie (CHATS)]
6346 *) Avoid filename truncation for various CA files.
6347 [Ben Laurie (CHATS)]
6349 *) Use sizeof in preference to magic numbers.
6350 [Ben Laurie (CHATS)]
6352 *) Avoid filename truncation in cert requests.
6353 [Ben Laurie (CHATS)]
6355 *) Add assertions to check for (supposedly impossible) buffer
6357 [Ben Laurie (CHATS)]
6359 *) Don't cache truncated DNS entries in the local cache (this could
6360 potentially lead to a spoofing attack).
6361 [Ben Laurie (CHATS)]
6363 *) Fix various buffers to be large enough for hex/decimal
6364 representations in a platform independent manner.
6365 [Ben Laurie (CHATS)]
6367 *) Add CRYPTO_realloc_clean() to avoid information leakage when
6368 resizing buffers containing secrets, and use where appropriate.
6369 [Ben Laurie (CHATS)]
6371 *) Add BIO_indent() to avoid much slightly worrying code to do
6373 [Ben Laurie (CHATS)]
6375 *) Convert sprintf()/BIO_puts() to BIO_printf().
6376 [Ben Laurie (CHATS)]
6378 *) buffer_gets() could terminate with the buffer only half
6380 [Ben Laurie (CHATS)]
6382 *) Add assertions to prevent user-supplied crypto functions from
6383 overflowing internal buffers by having large block sizes, etc.
6384 [Ben Laurie (CHATS)]
6386 *) New OPENSSL_assert() macro (similar to assert(), but enabled
6388 [Ben Laurie (CHATS)]
6390 *) Eliminate unused copy of key in RC4.
6391 [Ben Laurie (CHATS)]
6393 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
6394 [Ben Laurie (CHATS)]
6396 *) Fix off-by-one error in EGD path.
6397 [Ben Laurie (CHATS)]
6399 *) If RANDFILE path is too long, ignore instead of truncating.
6400 [Ben Laurie (CHATS)]
6402 *) Eliminate unused and incorrectly sized X.509 structure
6404 [Ben Laurie (CHATS)]
6406 *) Eliminate unused and dangerous function knumber().
6407 [Ben Laurie (CHATS)]
6409 *) Eliminate unused and dangerous structure, KSSL_ERR.
6410 [Ben Laurie (CHATS)]
6412 *) Protect against overlong session ID context length in an encoded
6413 session object. Since these are local, this does not appear to be
6415 [Ben Laurie (CHATS)]
6417 *) Change from security patch (see 0.9.6e below) that did not affect
6418 the 0.9.6 release series:
6420 Remote buffer overflow in SSL3 protocol - an attacker could
6421 supply an oversized master key in Kerberos-enabled versions.
6423 [Ben Laurie (CHATS)]
6425 *) Change the SSL kerb5 codes to match RFC 2712.
6428 *) Make -nameopt work fully for req and add -reqopt switch.
6429 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
6431 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
6432 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
6434 *) Make sure tests can be performed even if the corresponding algorithms
6435 have been removed entirely. This was also the last step to make
6436 OpenSSL compilable with DJGPP under all reasonable conditions.
6437 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
6439 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
6440 to allow version independent disabling of normally unselected ciphers,
6441 which may be activated as a side-effect of selecting a single cipher.
6443 (E.g., cipher list string "RSA" enables ciphersuites that are left
6444 out of "ALL" because they do not provide symmetric encryption.
6445 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
6446 [Lutz Jaenicke, Bodo Moeller]
6448 *) Add appropriate support for separate platform-dependent build
6449 directories. The recommended way to make a platform-dependent
6450 build directory is the following (tested on Linux), maybe with
6453 # Place yourself outside of the OpenSSL source tree. In
6454 # this example, the environment variable OPENSSL_SOURCE
6455 # is assumed to contain the absolute OpenSSL source directory.
6456 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
6457 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
6458 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
6459 mkdir -p `dirname $F`
6460 ln -s $OPENSSL_SOURCE/$F $F
6463 To be absolutely sure not to disturb the source tree, a "make clean"
6464 is a good thing. If it isn't successful, don't worry about it,
6465 it probably means the source directory is very clean.
6468 *) Make sure any ENGINE control commands make local copies of string
6469 pointers passed to them whenever necessary. Otherwise it is possible
6470 the caller may have overwritten (or deallocated) the original string
6471 data when a later ENGINE operation tries to use the stored values.
6472 [Götz Babin-Ebell <babinebell@trustcenter.de>]
6474 *) Improve diagnostics in file reading and command-line digests.
6475 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
6477 *) Add AES modes CFB and OFB to the object database. Correct an
6478 error in AES-CFB decryption.
6481 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
6482 allows existing EVP_CIPHER_CTX structures to be reused after
6483 calling EVP_*Final(). This behaviour is used by encryption
6484 BIOs and some applications. This has the side effect that
6485 applications must explicitly clean up cipher contexts with
6486 EVP_CIPHER_CTX_cleanup() or they will leak memory.
6489 *) Check the values of dna and dnb in bn_mul_recursive before calling
6490 bn_mul_comba (a non zero value means the a or b arrays do not contain
6491 n2 elements) and fallback to bn_mul_normal if either is not zero.
6494 *) Fix escaping of non-ASCII characters when using the -subj option
6495 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
6498 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
6499 form for "surname", serialNumber has no short form.
6500 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
6501 therefore remove "mail" short name for "internet 7".
6502 The OID for unique identifiers in X509 certificates is
6503 x500UniqueIdentifier, not uniqueIdentifier.
6504 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
6507 *) Add an "init" command to the ENGINE config module and auto initialize
6508 ENGINEs. Without any "init" command the ENGINE will be initialized
6509 after all ctrl commands have been executed on it. If init=1 the
6510 ENGINE is initailized at that point (ctrls before that point are run
6511 on the uninitialized ENGINE and after on the initialized one). If
6512 init=0 then the ENGINE will not be iniatialized at all.
6515 *) Fix the 'app_verify_callback' interface so that the user-defined
6516 argument is actually passed to the callback: In the
6517 SSL_CTX_set_cert_verify_callback() prototype, the callback
6518 declaration has been changed from
6521 int (*cb)(X509_STORE_CTX *,void *);
6522 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
6523 i=s->ctx->app_verify_callback(&ctx)
6524 has been changed into
6525 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
6527 To update applications using SSL_CTX_set_cert_verify_callback(),
6528 a dummy argument can be added to their callback functions.
6529 [D. K. Smetters <smetters@parc.xerox.com>]
6531 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
6532 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
6534 *) Add and OPENSSL_LOAD_CONF define which will cause
6535 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
6536 This allows older applications to transparently support certain
6537 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
6538 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
6539 load the config file and OPENSSL_add_all_algorithms_conf() which will
6540 always load it have also been added.
6543 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
6544 Adjust NIDs and EVP layer.
6545 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
6547 *) Config modules support in openssl utility.
6549 Most commands now load modules from the config file,
6550 though in a few (such as version) this isn't done
6551 because it couldn't be used for anything.
6553 In the case of ca and req the config file used is
6554 the same as the utility itself: that is the -config
6555 command line option can be used to specify an
6559 *) Move default behaviour from OPENSSL_config(). If appname is NULL
6560 use "openssl_conf" if filename is NULL use default openssl config file.
6563 *) Add an argument to OPENSSL_config() to allow the use of an alternative
6564 config section name. Add a new flag to tolerate a missing config file
6565 and move code to CONF_modules_load_file().
6568 *) Support for crypto accelerator cards from Accelerated Encryption
6569 Processing, www.aep.ie. (Use engine 'aep')
6570 The support was copied from 0.9.6c [engine] and adapted/corrected
6571 to work with the new engine framework.
6572 [AEP Inc. and Richard Levitte]
6574 *) Support for SureWare crypto accelerator cards from Baltimore
6575 Technologies. (Use engine 'sureware')
6576 The support was copied from 0.9.6c [engine] and adapted
6577 to work with the new engine framework.
6580 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
6581 make the newer ENGINE framework commands for the CHIL engine work.
6582 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
6584 *) Make it possible to produce shared libraries on ReliantUNIX.
6585 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
6587 *) Add the configuration target debug-linux-ppro.
6588 Make 'openssl rsa' use the general key loading routines
6589 implemented in apps.c, and make those routines able to
6590 handle the key format FORMAT_NETSCAPE and the variant
6592 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
6594 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
6595 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
6597 *) Add -keyform to rsautl, and document -engine.
6598 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
6600 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
6601 BIO_R_NO_SUCH_FILE error code rather than the generic
6602 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
6605 *) Add new functions
6607 ERR_peek_last_error_line
6608 ERR_peek_last_error_line_data.
6609 These are similar to
6612 ERR_peek_error_line_data,
6613 but report on the latest error recorded rather than the first one
6614 still in the error queue.
6615 [Ben Laurie, Bodo Moeller]
6617 *) default_algorithms option in ENGINE config module. This allows things
6619 default_algorithms = ALL
6620 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
6623 *) Preliminary ENGINE config module.
6626 *) New experimental application configuration code.
6629 *) Change the AES code to follow the same name structure as all other
6630 symmetric ciphers, and behave the same way. Move everything to
6631 the directory crypto/aes, thereby obsoleting crypto/rijndael.
6632 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
6634 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
6635 [Ben Laurie and Theo de Raadt]
6637 *) Add option to output public keys in req command.
6638 [Massimiliano Pala madwolf@openca.org]
6640 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
6641 (up to about 10% better than before for P-192 and P-224).
6644 *) New functions/macros
6646 SSL_CTX_set_msg_callback(ctx, cb)
6647 SSL_CTX_set_msg_callback_arg(ctx, arg)
6648 SSL_set_msg_callback(ssl, cb)
6649 SSL_set_msg_callback_arg(ssl, arg)
6651 to request calling a callback function
6653 void cb(int write_p, int version, int content_type,
6654 const void *buf, size_t len, SSL *ssl, void *arg)
6656 whenever a protocol message has been completely received
6657 (write_p == 0) or sent (write_p == 1). Here 'version' is the
6658 protocol version according to which the SSL library interprets
6659 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
6660 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
6661 the content type as defined in the SSL 3.0/TLS 1.0 protocol
6662 specification (change_cipher_spec(20), alert(21), handshake(22)).
6663 'buf' and 'len' point to the actual message, 'ssl' to the
6664 SSL object, and 'arg' is the application-defined value set by
6665 SSL[_CTX]_set_msg_callback_arg().
6667 'openssl s_client' and 'openssl s_server' have new '-msg' options
6668 to enable a callback that displays all protocol messages.
6671 *) Change the shared library support so shared libraries are built as
6672 soon as the corresponding static library is finished, and thereby get
6673 openssl and the test programs linked against the shared library.
6674 This still only happens when the keyword "shard" has been given to
6675 the configuration scripts.
6677 NOTE: shared library support is still an experimental thing, and
6678 backward binary compatibility is still not guaranteed.
6679 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
6681 *) Add support for Subject Information Access extension.
6682 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
6684 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
6685 additional bytes when new memory had to be allocated, not just
6686 when reusing an existing buffer.
6689 *) New command line and configuration option 'utf8' for the req command.
6690 This allows field values to be specified as UTF8 strings.
6693 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
6694 runs for the former and machine-readable output for the latter.
6697 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
6698 of the e-mail address in the DN (i.e., it will go into a certificate
6699 extension only). The new configuration file option 'email_in_dn = no'
6700 has the same effect.
6701 [Massimiliano Pala madwolf@openca.org]
6703 *) Change all functions with names starting with des_ to be starting
6704 with DES_ instead. Add wrappers that are compatible with libdes,
6705 but are named _ossl_old_des_*. Finally, add macros that map the
6706 des_* symbols to the corresponding _ossl_old_des_* if libdes
6707 compatibility is desired. If OpenSSL 0.9.6c compatibility is
6708 desired, the des_* symbols will be mapped to DES_*, with one
6711 Since we provide two compatibility mappings, the user needs to
6712 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
6713 compatibility is desired. The default (i.e., when that macro
6714 isn't defined) is OpenSSL 0.9.6c compatibility.
6716 There are also macros that enable and disable the support of old
6717 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
6718 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
6719 are defined, the default will apply: to support the old des routines.
6721 In either case, one must include openssl/des.h to get the correct
6722 definitions. Do not try to just include openssl/des_old.h, that
6725 NOTE: This is a major break of an old API into a new one. Software
6726 authors are encouraged to switch to the DES_ style functions. Some
6727 time in the future, des_old.h and the libdes compatibility functions
6728 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
6729 default), and then completely removed.
6732 *) Test for certificates which contain unsupported critical extensions.
6733 If such a certificate is found during a verify operation it is
6734 rejected by default: this behaviour can be overridden by either
6735 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
6736 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
6737 X509_supported_extension() has also been added which returns 1 if a
6738 particular extension is supported.
6741 *) Modify the behaviour of EVP cipher functions in similar way to digests
6742 to retain compatibility with existing code.
6745 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
6746 compatibility with existing code. In particular the 'ctx' parameter does
6747 not have to be to be initialized before the call to EVP_DigestInit() and
6748 it is tidied up after a call to EVP_DigestFinal(). New function
6749 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
6750 EVP_MD_CTX_copy() changed to not require the destination to be
6751 initialized valid and new function EVP_MD_CTX_copy_ex() added which
6752 requires the destination to be valid.
6754 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
6755 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
6758 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
6759 so that complete 'Handshake' protocol structures are kept in memory
6760 instead of overwriting 'msg_type' and 'length' with 'body' data.
6763 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
6764 [Massimo Santin via Richard Levitte]
6766 *) Major restructuring to the underlying ENGINE code. This includes
6767 reduction of linker bloat, separation of pure "ENGINE" manipulation
6768 (initialisation, etc) from functionality dealing with implementations
6769 of specific crypto iterfaces. This change also introduces integrated
6770 support for symmetric ciphers and digest implementations - so ENGINEs
6771 can now accelerate these by providing EVP_CIPHER and EVP_MD
6772 implementations of their own. This is detailed in crypto/engine/README
6773 as it couldn't be adequately described here. However, there are a few
6774 API changes worth noting - some RSA, DSA, DH, and RAND functions that
6775 were changed in the original introduction of ENGINE code have now
6776 reverted back - the hooking from this code to ENGINE is now a good
6777 deal more passive and at run-time, operations deal directly with
6778 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
6779 dereferencing through an ENGINE pointer any more. Also, the ENGINE
6780 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
6781 they were not being used by the framework as there is no concept of a
6782 BIGNUM_METHOD and they could not be generalised to the new
6783 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
6784 ENGINE_cpy() has been removed as it cannot be consistently defined in
6788 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
6791 *) Change mkdef.pl to sort symbols that get the same entry number,
6792 and make sure the automatically generated functions ERR_load_*
6793 become part of libeay.num as well.
6796 *) New function SSL_renegotiate_pending(). This returns true once
6797 renegotiation has been requested (either SSL_renegotiate() call
6798 or HelloRequest/ClientHello received from the peer) and becomes
6799 false once a handshake has been completed.
6800 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
6801 sends a HelloRequest, but does not ensure that a handshake takes
6802 place. SSL_renegotiate_pending() is useful for checking if the
6803 client has followed the request.)
6806 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
6807 By default, clients may request session resumption even during
6808 renegotiation (if session ID contexts permit); with this option,
6809 session resumption is possible only in the first handshake.
6811 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
6812 more bits available for options that should not be part of
6813 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
6816 *) Add some demos for certificate and certificate request creation.
6819 *) Make maximum certificate chain size accepted from the peer application
6820 settable (SSL*_get/set_max_cert_list()), as proposed by
6821 "Douglas E. Engert" <deengert@anl.gov>.
6824 *) Add support for shared libraries for Unixware-7
6825 (Boyd Lynn Gerber <gerberb@zenez.com>).
6828 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
6829 be done prior to destruction. Use this to unload error strings from
6830 ENGINEs that load their own error strings. NB: This adds two new API
6831 functions to "get" and "set" this destroy handler in an ENGINE.
6834 *) Alter all existing ENGINE implementations (except "openssl" and
6835 "openbsd") to dynamically instantiate their own error strings. This
6836 makes them more flexible to be built both as statically-linked ENGINEs
6837 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
6838 Also, add stub code to each that makes building them as self-contained
6839 shared-libraries easier (see README.ENGINE).
6842 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
6843 implementations into applications that are completely implemented in
6844 self-contained shared-libraries. The "dynamic" ENGINE exposes control
6845 commands that can be used to configure what shared-library to load and
6846 to control aspects of the way it is handled. Also, made an update to
6847 the README.ENGINE file that brings its information up-to-date and
6848 provides some information and instructions on the "dynamic" ENGINE
6849 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
6852 *) Make it possible to unload ranges of ERR strings with a new
6853 "ERR_unload_strings" function.
6856 *) Add a copy() function to EVP_MD.
6859 *) Make EVP_MD routines take a context pointer instead of just the
6860 md_data void pointer.
6863 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
6864 that the digest can only process a single chunk of data
6865 (typically because it is provided by a piece of
6866 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
6867 is only going to provide a single chunk of data, and hence the
6868 framework needn't accumulate the data for oneshot drivers.
6871 *) As with "ERR", make it possible to replace the underlying "ex_data"
6872 functions. This change also alters the storage and management of global
6873 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
6874 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
6875 index counters. The API functions that use this state have been changed
6876 to take a "class_index" rather than pointers to the class's local STACK
6877 and counter, and there is now an API function to dynamically create new
6878 classes. This centralisation allows us to (a) plug a lot of the
6879 thread-safety problems that existed, and (b) makes it possible to clean
6880 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
6881 such data would previously have always leaked in application code and
6882 workarounds were in place to make the memory debugging turn a blind eye
6883 to it. Application code that doesn't use this new function will still
6884 leak as before, but their memory debugging output will announce it now
6885 rather than letting it slide.
6887 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
6888 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
6889 has a return value to indicate success or failure.
6892 *) Make it possible to replace the underlying "ERR" functions such that the
6893 global state (2 LHASH tables and 2 locks) is only used by the "default"
6894 implementation. This change also adds two functions to "get" and "set"
6895 the implementation prior to it being automatically set the first time
6896 any other ERR function takes place. Ie. an application can call "get",
6897 pass the return value to a module it has just loaded, and that module
6898 can call its own "set" function using that value. This means the
6899 module's "ERR" operations will use (and modify) the error state in the
6900 application and not in its own statically linked copy of OpenSSL code.
6903 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
6904 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
6905 the operation, and provides a more encapsulated way for external code
6906 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
6907 to use these functions rather than manually incrementing the counts.
6909 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
6912 *) Add EVP test program.
6915 *) Add symmetric cipher support to ENGINE. Expect the API to change!
6918 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
6919 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
6920 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
6921 These allow a CRL to be built without having to access X509_CRL fields
6922 directly. Modify 'ca' application to use new functions.
6925 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
6926 bug workarounds. Rollback attack detection is a security feature.
6927 The problem will only arise on OpenSSL servers when TLSv1 is not
6928 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
6929 Software authors not wanting to support TLSv1 will have special reasons
6930 for their choice and can explicitly enable this option.
6931 [Bodo Moeller, Lutz Jaenicke]
6933 *) Rationalise EVP so it can be extended: don't include a union of
6934 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
6935 (similar to those existing for EVP_CIPHER_CTX).
6940 EVP_MD_CTX_init(&md); /* new function call */
6941 EVP_DigestInit(&md, EVP_sha1());
6942 EVP_DigestUpdate(&md, in, len);
6943 EVP_DigestFinal(&md, out, NULL);
6944 EVP_MD_CTX_cleanup(&md); /* new function call */
6948 *) Make DES key schedule conform to the usual scheme, as well as
6949 correcting its structure. This means that calls to DES functions
6950 now have to pass a pointer to a des_key_schedule instead of a
6951 plain des_key_schedule (which was actually always a pointer
6954 des_key_schedule ks;
6956 des_set_key_checked(..., &ks);
6957 des_ncbc_encrypt(..., &ks, ...);
6959 (Note that a later change renames 'des_...' into 'DES_...'.)
6962 *) Initial reduction of linker bloat: the use of some functions, such as
6963 PEM causes large amounts of unused functions to be linked in due to
6964 poor organisation. For example pem_all.c contains every PEM function
6965 which has a knock on effect of linking in large amounts of (unused)
6966 ASN1 code. Grouping together similar functions and splitting unrelated
6967 functions prevents this.
6970 *) Cleanup of EVP macros.
6973 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
6974 correct _ecb suffix.
6977 *) Add initial OCSP responder support to ocsp application. The
6978 revocation information is handled using the text based index
6979 use by the ca application. The responder can either handle
6980 requests generated internally, supplied in files (for example
6981 via a CGI script) or using an internal minimal server.
6984 *) Add configuration choices to get zlib compression for TLS.
6987 *) Changes to Kerberos SSL for RFC 2712 compliance:
6988 1. Implemented real KerberosWrapper, instead of just using
6989 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
6990 2. Implemented optional authenticator field of KerberosWrapper.
6992 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
6993 and authenticator structs; see crypto/krb5/.
6995 Generalized Kerberos calls to support multiple Kerberos libraries.
6996 [Vern Staats <staatsvr@asc.hpc.mil>,
6997 Jeffrey Altman <jaltman@columbia.edu>
6998 via Richard Levitte]
7000 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
7001 already does with RSA. testdsa.h now has 'priv_key/pub_key'
7002 values for each of the key sizes rather than having just
7003 parameters (and 'speed' generating keys each time).
7006 *) Speed up EVP routines.
7009 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
7010 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
7011 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
7012 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
7014 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
7015 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
7016 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
7019 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
7021 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
7024 *) Added the OS2-EMX target.
7025 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
7027 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
7028 to support NCONF routines in extension code. New function CONF_set_nconf()
7029 to allow functions which take an NCONF to also handle the old LHASH
7030 structure: this means that the old CONF compatible routines can be
7031 retained (in particular wrt extensions) without having to duplicate the
7032 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
7035 *) Enhance the general user interface with mechanisms for inner control
7036 and with possibilities to have yes/no kind of prompts.
7039 *) Change all calls to low level digest routines in the library and
7040 applications to use EVP. Add missing calls to HMAC_cleanup() and
7041 don't assume HMAC_CTX can be copied using memcpy().
7042 [Verdon Walker <VWalker@novell.com>, Steve Henson]
7044 *) Add the possibility to control engines through control names but with
7045 arbitrary arguments instead of just a string.
7046 Change the key loaders to take a UI_METHOD instead of a callback
7047 function pointer. NOTE: this breaks binary compatibility with earlier
7048 versions of OpenSSL [engine].
7049 Adapt the nCipher code for these new conditions and add a card insertion
7053 *) Enhance the general user interface with mechanisms to better support
7054 dialog box interfaces, application-defined prompts, the possibility
7055 to use defaults (for example default passwords from somewhere else)
7056 and interrupts/cancellations.
7059 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
7060 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
7063 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
7064 tidy up some unnecessarily weird code in 'sk_new()').
7065 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
7067 *) Change the key loading routines for ENGINEs to use the same kind
7068 callback (pem_password_cb) as all other routines that need this
7072 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
7073 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
7074 than this minimum value is recommended.
7077 *) New random seeder for OpenVMS, using the system process statistics
7078 that are easily reachable.
7081 *) Windows apparently can't transparently handle global
7082 variables defined in DLLs. Initialisations such as:
7084 const ASN1_ITEM *it = &ASN1_INTEGER_it;
7086 won't compile. This is used by the any applications that need to
7087 declare their own ASN1 modules. This was fixed by adding the option
7088 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
7089 needed for static libraries under Win32.
7092 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
7093 setting of purpose and trust fields. New X509_STORE trust and
7094 purpose functions and tidy up setting in other SSL functions.
7097 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
7098 structure. These are inherited by X509_STORE_CTX when it is
7099 initialised. This allows various defaults to be set in the
7100 X509_STORE structure (such as flags for CRL checking and custom
7101 purpose or trust settings) for functions which only use X509_STORE_CTX
7102 internally such as S/MIME.
7104 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
7105 trust settings if they are not set in X509_STORE. This allows X509_STORE
7106 purposes and trust (in S/MIME for example) to override any set by default.
7108 Add command line options for CRL checking to smime, s_client and s_server
7112 *) Initial CRL based revocation checking. If the CRL checking flag(s)
7113 are set then the CRL is looked up in the X509_STORE structure and
7114 its validity and signature checked, then if the certificate is found
7115 in the CRL the verify fails with a revoked error.
7117 Various new CRL related callbacks added to X509_STORE_CTX structure.
7119 Command line options added to 'verify' application to support this.
7121 This needs some additional work, such as being able to handle multiple
7122 CRLs with different times, extension based lookup (rather than just
7123 by subject name) and ultimately more complete V2 CRL extension
7127 *) Add a general user interface API (crypto/ui/). This is designed
7128 to replace things like des_read_password and friends (backward
7129 compatibility functions using this new API are provided).
7130 The purpose is to remove prompting functions from the DES code
7131 section as well as provide for prompting through dialog boxes in
7132 a window system and the like.
7135 *) Add "ex_data" support to ENGINE so implementations can add state at a
7136 per-structure level rather than having to store it globally.
7139 *) Make it possible for ENGINE structures to be copied when retrieved by
7140 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
7141 This causes the "original" ENGINE structure to act like a template,
7142 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
7143 operational state can be localised to each ENGINE structure, despite the
7144 fact they all share the same "methods". New ENGINE structures returned in
7145 this case have no functional references and the return value is the single
7146 structural reference. This matches the single structural reference returned
7147 by ENGINE_by_id() normally, when it is incremented on the pre-existing
7151 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
7152 needs to match any other type at all we need to manually clear the
7156 *) Changes to the "openssl engine" utility to include;
7157 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
7158 about an ENGINE's available control commands.
7159 - executing control commands from command line arguments using the
7160 '-pre' and '-post' switches. '-post' is only used if '-t' is
7161 specified and the ENGINE is successfully initialised. The syntax for
7162 the individual commands are colon-separated, for example;
7163 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
7166 *) New dynamic control command support for ENGINEs. ENGINEs can now
7167 declare their own commands (numbers), names (strings), descriptions,
7168 and input types for run-time discovery by calling applications. A
7169 subset of these commands are implicitly classed as "executable"
7170 depending on their input type, and only these can be invoked through
7171 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
7172 can be based on user input, config files, etc). The distinction is
7173 that "executable" commands cannot return anything other than a boolean
7174 result and can only support numeric or string input, whereas some
7175 discoverable commands may only be for direct use through
7176 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
7177 pointers, or other custom uses. The "executable" commands are to
7178 support parameterisations of ENGINE behaviour that can be
7179 unambiguously defined by ENGINEs and used consistently across any
7180 OpenSSL-based application. Commands have been added to all the
7181 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
7182 control over shared-library paths without source code alterations.
7185 *) Changed all ENGINE implementations to dynamically allocate their
7186 ENGINEs rather than declaring them statically. Apart from this being
7187 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
7188 this also allows the implementations to compile without using the
7189 internal engine_int.h header.
7192 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
7193 'const' value. Any code that should be able to modify a RAND_METHOD
7194 should already have non-const pointers to it (ie. they should only
7195 modify their own ones).
7198 *) Made a variety of little tweaks to the ENGINE code.
7199 - "atalla" and "ubsec" string definitions were moved from header files
7200 to C code. "nuron" string definitions were placed in variables
7201 rather than hard-coded - allowing parameterisation of these values
7202 later on via ctrl() commands.
7203 - Removed unused "#if 0"'d code.
7204 - Fixed engine list iteration code so it uses ENGINE_free() to release
7205 structural references.
7206 - Constified the RAND_METHOD element of ENGINE structures.
7207 - Constified various get/set functions as appropriate and added
7208 missing functions (including a catch-all ENGINE_cpy that duplicates
7209 all ENGINE values onto a new ENGINE except reference counts/state).
7210 - Removed NULL parameter checks in get/set functions. Setting a method
7211 or function to NULL is a way of cancelling out a previously set
7212 value. Passing a NULL ENGINE parameter is just plain stupid anyway
7213 and doesn't justify the extra error symbols and code.
7214 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
7215 flags from engine_int.h to engine.h.
7216 - Changed prototypes for ENGINE handler functions (init(), finish(),
7217 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
7220 *) Implement binary inversion algorithm for BN_mod_inverse in addition
7221 to the algorithm using long division. The binary algorithm can be
7222 used only if the modulus is odd. On 32-bit systems, it is faster
7223 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
7224 roughly 5-15% for 256-bit moduli), so we use it only for moduli
7225 up to 450 bits. In 64-bit environments, the binary algorithm
7226 appears to be advantageous for much longer moduli; here we use it
7227 for moduli up to 2048 bits.
7230 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
7231 could not support the combine flag in choice fields.
7234 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
7235 extensions from a certificate request to the certificate.
7238 *) Allow multiple 'certopt' and 'nameopt' options to be separated
7239 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
7240 file: this allows the display of the certificate about to be
7241 signed to be customised, to allow certain fields to be included
7242 or excluded and extension details. The old system didn't display
7243 multicharacter strings properly, omitted fields not in the policy
7244 and couldn't display additional details such as extensions.
7247 *) Function EC_POINTs_mul for multiple scalar multiplication
7248 of an arbitrary number of elliptic curve points
7249 \sum scalars[i]*points[i],
7250 optionally including the generator defined for the EC_GROUP:
7251 scalar*generator + \sum scalars[i]*points[i].
7253 EC_POINT_mul is a simple wrapper function for the typical case
7254 that the point list has just one item (besides the optional
7258 *) First EC_METHODs for curves over GF(p):
7260 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
7261 operations and provides various method functions that can also
7262 operate with faster implementations of modular arithmetic.
7264 EC_GFp_mont_method() reuses most functions that are part of
7265 EC_GFp_simple_method, but uses Montgomery arithmetic.
7267 [Bodo Moeller; point addition and point doubling
7268 implementation directly derived from source code provided by
7269 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
7271 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
7272 crypto/ec/ec_lib.c):
7274 Curves are EC_GROUP objects (with an optional group generator)
7275 based on EC_METHODs that are built into the library.
7277 Points are EC_POINT objects based on EC_GROUP objects.
7279 Most of the framework would be able to handle curves over arbitrary
7280 finite fields, but as there are no obvious types for fields other
7281 than GF(p), some functions are limited to that for now.
7284 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
7285 that the file contains a complete HTTP response.
7288 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
7289 change the def and num file printf format specifier from "%-40sXXX"
7290 to "%-39s XXX". The latter will always guarantee a space after the
7291 field while the former will cause them to run together if the field
7292 is 40 of more characters long.
7295 *) Constify the cipher and digest 'method' functions and structures
7296 and modify related functions to take constant EVP_MD and EVP_CIPHER
7300 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
7301 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
7304 *) Modify EVP_Digest*() routines so they now return values. Although the
7305 internal software routines can never fail additional hardware versions
7309 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
7311 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
7312 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
7315 ERR_R_NESTED_ASN1_ERROR
7317 ERR_R_MISSING_ASN1_EOS
7318 were 4 .. 9, conflicting with
7319 ERR_LIB_RSA (= ERR_R_RSA_LIB)
7321 ERR_LIB_PEM (= ERR_R_PEM_LIB).
7322 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
7324 Add new error code 'ERR_R_INTERNAL_ERROR'.
7327 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
7331 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
7332 sets the subject name for a new request or supersedes the
7333 subject name in a given request. Formats that can be parsed are
7334 'CN=Some Name, OU=myOU, C=IT'
7336 'CN=Some Name/OU=myOU/C=IT'.
7338 Add options '-batch' and '-verbose' to 'openssl req'.
7339 [Massimiliano Pala <madwolf@hackmasters.net>]
7341 *) Introduce the possibility to access global variables through
7342 functions on platform were that's the best way to handle exporting
7343 global variables in shared libraries. To enable this functionality,
7344 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
7345 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
7346 is normally done by Configure or something similar).
7348 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
7349 in the source file (foo.c) like this:
7351 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
7352 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
7354 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
7355 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
7357 OPENSSL_DECLARE_GLOBAL(int,foo);
7358 #define foo OPENSSL_GLOBAL_REF(foo)
7359 OPENSSL_DECLARE_GLOBAL(double,bar);
7360 #define bar OPENSSL_GLOBAL_REF(bar)
7362 The #defines are very important, and therefore so is including the
7363 header file everywhere where the defined globals are used.
7365 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
7366 of ASN.1 items, but that structure is a bit different.
7368 The largest change is in util/mkdef.pl which has been enhanced with
7369 better and easier to understand logic to choose which symbols should
7370 go into the Windows .def files as well as a number of fixes and code
7371 cleanup (among others, algorithm keywords are now sorted
7372 lexicographically to avoid constant rewrites).
7375 *) In BN_div() keep a copy of the sign of 'num' before writing the
7376 result to 'rm' because if rm==num the value will be overwritten
7377 and produce the wrong result if 'num' is negative: this caused
7378 problems with BN_mod() and BN_nnmod().
7381 *) Function OCSP_request_verify(). This checks the signature on an
7382 OCSP request and verifies the signer certificate. The signer
7383 certificate is just checked for a generic purpose and OCSP request
7387 *) Add OCSP_check_validity() function to check the validity of OCSP
7388 responses. OCSP responses are prepared in real time and may only
7389 be a few seconds old. Simply checking that the current time lies
7390 between thisUpdate and nextUpdate max reject otherwise valid responses
7391 caused by either OCSP responder or client clock inaccuracy. Instead
7392 we allow thisUpdate and nextUpdate to fall within a certain period of
7393 the current time. The age of the response can also optionally be
7394 checked. Two new options -validity_period and -status_age added to
7398 *) If signature or public key algorithm is unrecognized print out its
7399 OID rather that just UNKNOWN.
7402 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
7403 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
7404 ID to be generated from the issuer certificate alone which can then be
7405 passed to OCSP_id_issuer_cmp().
7408 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
7409 ASN1 modules to export functions returning ASN1_ITEM pointers
7410 instead of the ASN1_ITEM structures themselves. This adds several
7411 new macros which allow the underlying ASN1 function/structure to
7412 be accessed transparently. As a result code should not use ASN1_ITEM
7413 references directly (such as &X509_it) but instead use the relevant
7414 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
7415 use of the new ASN1 code on platforms where exporting structures
7416 is problematical (for example in shared libraries) but exporting
7417 functions returning pointers to structures is not.
7420 *) Add support for overriding the generation of SSL/TLS session IDs.
7421 These callbacks can be registered either in an SSL_CTX or per SSL.
7422 The purpose of this is to allow applications to control, if they wish,
7423 the arbitrary values chosen for use as session IDs, particularly as it
7424 can be useful for session caching in multiple-server environments. A
7425 command-line switch for testing this (and any client code that wishes
7426 to use such a feature) has been added to "s_server".
7427 [Geoff Thorpe, Lutz Jaenicke]
7429 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
7430 of the form '#if defined(...) || defined(...) || ...' and
7431 '#if !defined(...) && !defined(...) && ...'. This also avoids
7432 the growing number of special cases it was previously handling.
7435 *) Make all configuration macros available for application by making
7436 sure they are available in opensslconf.h, by giving them names starting
7437 with "OPENSSL_" to avoid conflicts with other packages and by making
7438 sure e_os2.h will cover all platform-specific cases together with
7440 Additionally, it is now possible to define configuration/platform-
7441 specific names (called "system identities"). In the C code, these
7442 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
7443 macro with the name beginning with "OPENSSL_SYS_", which is determined
7444 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
7448 *) New option -set_serial to 'req' and 'x509' this allows the serial
7449 number to use to be specified on the command line. Previously self
7450 signed certificates were hard coded with serial number 0 and the
7451 CA options of 'x509' had to use a serial number in a file which was
7455 *) New options to 'ca' utility to support V2 CRL entry extensions.
7456 Currently CRL reason, invalidity date and hold instruction are
7457 supported. Add new CRL extensions to V3 code and some new objects.
7460 *) New function EVP_CIPHER_CTX_set_padding() this is used to
7461 disable standard block padding (aka PKCS#5 padding) in the EVP
7462 API, which was previously mandatory. This means that the data is
7463 not padded in any way and so the total length much be a multiple
7464 of the block size, otherwise an error occurs.
7467 *) Initial (incomplete) OCSP SSL support.
7470 *) New function OCSP_parse_url(). This splits up a URL into its host,
7471 port and path components: primarily to parse OCSP URLs. New -url
7472 option to ocsp utility.
7475 *) New nonce behavior. The return value of OCSP_check_nonce() now
7476 reflects the various checks performed. Applications can decide
7477 whether to tolerate certain situations such as an absent nonce
7478 in a response when one was present in a request: the ocsp application
7479 just prints out a warning. New function OCSP_add1_basic_nonce()
7480 this is to allow responders to include a nonce in a response even if
7481 the request is nonce-less.
7484 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
7485 skipped when using openssl x509 multiple times on a single input file,
7486 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
7489 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
7490 set string type: to handle setting ASN1_TIME structures. Fix ca
7491 utility to correctly initialize revocation date of CRLs.
7494 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
7495 the clients preferred ciphersuites and rather use its own preferences.
7496 Should help to work around M$ SGC (Server Gated Cryptography) bug in
7497 Internet Explorer by ensuring unchanged hash method during stepup.
7498 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
7501 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
7502 to aes and add a new 'exist' option to print out symbols that don't
7506 *) Additional options to ocsp utility to allow flags to be set and
7507 additional certificates supplied.
7510 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
7511 OCSP client a number of certificate to only verify the response
7515 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
7516 handle the new API. Currently only ECB, CBC modes supported. Add new
7519 Add TLS AES ciphersuites as described in RFC3268, "Advanced
7520 Encryption Standard (AES) Ciphersuites for Transport Layer
7521 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
7522 not enabled by default and were not part of the "ALL" ciphersuite
7523 alias because they were not yet official; they could be
7524 explicitly requested by specifying the "AESdraft" ciphersuite
7525 group alias. In the final release of OpenSSL 0.9.7, the group
7526 alias is called "AES" and is part of "ALL".)
7527 [Ben Laurie, Steve Henson, Bodo Moeller]
7529 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
7530 request to response.
7533 *) Functions for OCSP responders. OCSP_request_onereq_count(),
7534 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
7535 extract information from a certificate request. OCSP_response_create()
7536 creates a response and optionally adds a basic response structure.
7537 OCSP_basic_add1_status() adds a complete single response to a basic
7538 response and returns the OCSP_SINGLERESP structure just added (to allow
7539 extensions to be included for example). OCSP_basic_add1_cert() adds a
7540 certificate to a basic response and OCSP_basic_sign() signs a basic
7541 response with various flags. New helper functions ASN1_TIME_check()
7542 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
7543 (converts ASN1_TIME to GeneralizedTime).
7546 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
7547 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
7548 structure from a certificate. X509_pubkey_digest() digests the public_key
7549 contents: this is used in various key identifiers.
7552 *) Make sk_sort() tolerate a NULL argument.
7553 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
7555 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
7556 passed by the function are trusted implicitly. If any of them signed the
7557 response then it is assumed to be valid and is not verified.
7560 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
7561 to data. This was previously part of the PKCS7 ASN1 code. This
7562 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
7563 [Steve Henson, reported by Kenneth R. Robinette
7564 <support@securenetterm.com>]
7566 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
7567 routines: without these tracing memory leaks is very painful.
7568 Fix leaks in PKCS12 and PKCS7 routines.
7571 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
7572 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
7573 effectively meant GeneralizedTime would never be used. Now it
7574 is initialised to -1 but X509_time_adj() now has to check the value
7575 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
7576 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
7577 [Steve Henson, reported by Kenneth R. Robinette
7578 <support@securenetterm.com>]
7580 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
7581 result in a zero length in the ASN1_INTEGER structure which was
7582 not consistent with the structure when d2i_ASN1_INTEGER() was used
7583 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
7584 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
7585 where it did not print out a minus for negative ASN1_INTEGER.
7588 *) Add summary printout to ocsp utility. The various functions which
7589 convert status values to strings have been renamed to:
7590 OCSP_response_status_str(), OCSP_cert_status_str() and
7591 OCSP_crl_reason_str() and are no longer static. New options
7592 to verify nonce values and to disable verification. OCSP response
7593 printout format cleaned up.
7596 *) Add additional OCSP certificate checks. These are those specified
7597 in RFC2560. This consists of two separate checks: the CA of the
7598 certificate being checked must either be the OCSP signer certificate
7599 or the issuer of the OCSP signer certificate. In the latter case the
7600 OCSP signer certificate must contain the OCSP signing extended key
7601 usage. This check is performed by attempting to match the OCSP
7602 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
7603 in the OCSP_CERTID structures of the response.
7606 *) Initial OCSP certificate verification added to OCSP_basic_verify()
7607 and related routines. This uses the standard OpenSSL certificate
7608 verify routines to perform initial checks (just CA validity) and
7609 to obtain the certificate chain. Then additional checks will be
7610 performed on the chain. Currently the root CA is checked to see
7611 if it is explicitly trusted for OCSP signing. This is used to set
7612 a root CA as a global signing root: that is any certificate that
7613 chains to that CA is an acceptable OCSP signing certificate.
7616 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
7617 extensions from a separate configuration file.
7618 As when reading extensions from the main configuration file,
7619 the '-extensions ...' option may be used for specifying the
7621 [Massimiliano Pala <madwolf@comune.modena.it>]
7623 *) New OCSP utility. Allows OCSP requests to be generated or
7624 read. The request can be sent to a responder and the output
7625 parsed, outputed or printed in text form. Not complete yet:
7626 still needs to check the OCSP response validity.
7629 *) New subcommands for 'openssl ca':
7630 'openssl ca -status <serial>' prints the status of the cert with
7631 the given serial number (according to the index file).
7632 'openssl ca -updatedb' updates the expiry status of certificates
7634 [Massimiliano Pala <madwolf@comune.modena.it>]
7636 *) New '-newreq-nodes' command option to CA.pl. This is like
7637 '-newreq', but calls 'openssl req' with the '-nodes' option
7638 so that the resulting key is not encrypted.
7639 [Damien Miller <djm@mindrot.org>]
7641 *) New configuration for the GNU Hurd.
7642 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
7644 *) Initial code to implement OCSP basic response verify. This
7645 is currently incomplete. Currently just finds the signer's
7646 certificate and verifies the signature on the response.
7649 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
7650 value of OPENSSLDIR. This is available via the new '-d' option
7651 to 'openssl version', and is also included in 'openssl version -a'.
7654 *) Allowing defining memory allocation callbacks that will be given
7655 file name and line number information in additional arguments
7656 (a const char* and an int). The basic functionality remains, as
7657 well as the original possibility to just replace malloc(),
7658 realloc() and free() by functions that do not know about these
7659 additional arguments. To register and find out the current
7660 settings for extended allocation functions, the following
7661 functions are provided:
7663 CRYPTO_set_mem_ex_functions
7664 CRYPTO_set_locked_mem_ex_functions
7665 CRYPTO_get_mem_ex_functions
7666 CRYPTO_get_locked_mem_ex_functions
7668 These work the same way as CRYPTO_set_mem_functions and friends.
7669 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
7670 extended allocation function is enabled.
7671 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
7672 a conventional allocation function is enabled.
7673 [Richard Levitte, Bodo Moeller]
7675 *) Finish off removing the remaining LHASH function pointer casts.
7676 There should no longer be any prototype-casting required when using
7677 the LHASH abstraction, and any casts that remain are "bugs". See
7678 the callback types and macros at the head of lhash.h for details
7679 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
7682 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
7683 If /dev/[u]random devices are not available or do not return enough
7684 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
7686 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
7687 /etc/entropy will be queried once each in this sequence, querying stops
7688 when enough entropy was collected without querying more sockets.
7691 *) Change the Unix RAND_poll() variant to be able to poll several
7692 random devices, as specified by DEVRANDOM, until a sufficient amount
7693 of data has been collected. We spend at most 10 ms on each file
7694 (select timeout) and read in non-blocking mode. DEVRANDOM now
7695 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
7696 (previously it was just the string "/dev/urandom"), so on typical
7697 platforms the 10 ms delay will never occur.
7698 Also separate out the Unix variant to its own file, rand_unix.c.
7699 For VMS, there's a currently-empty rand_vms.c.
7702 *) Move OCSP client related routines to ocsp_cl.c. These
7703 provide utility functions which an application needing
7704 to issue a request to an OCSP responder and analyse the
7705 response will typically need: as opposed to those which an
7706 OCSP responder itself would need which will be added later.
7708 OCSP_request_sign() signs an OCSP request with an API similar
7709 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
7710 response. OCSP_response_get1_basic() extracts basic response
7711 from response. OCSP_resp_find_status(): finds and extracts status
7712 information from an OCSP_CERTID structure (which will be created
7713 when the request structure is built). These are built from lower
7714 level functions which work on OCSP_SINGLERESP structures but
7715 won't normally be used unless the application wishes to examine
7716 extensions in the OCSP response for example.
7718 Replace nonce routines with a pair of functions.
7719 OCSP_request_add1_nonce() adds a nonce value and optionally
7720 generates a random value. OCSP_check_nonce() checks the
7721 validity of the nonce in an OCSP response.
7724 *) Change function OCSP_request_add() to OCSP_request_add0_id().
7725 This doesn't copy the supplied OCSP_CERTID and avoids the
7726 need to free up the newly created id. Change return type
7727 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
7728 This can then be used to add extensions to the request.
7729 Deleted OCSP_request_new(), since most of its functionality
7730 is now in OCSP_REQUEST_new() (and the case insensitive name
7731 clash) apart from the ability to set the request name which
7732 will be added elsewhere.
7735 *) Update OCSP API. Remove obsolete extensions argument from
7736 various functions. Extensions are now handled using the new
7737 OCSP extension code. New simple OCSP HTTP function which
7738 can be used to send requests and parse the response.
7741 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
7742 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
7743 uses the special reorder version of SET OF to sort the attributes
7744 and reorder them to match the encoded order. This resolves a long
7745 standing problem: a verify on a PKCS7 structure just after signing
7746 it used to fail because the attribute order did not match the
7747 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
7748 it uses the received order. This is necessary to tolerate some broken
7749 software that does not order SET OF. This is handled by encoding
7750 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
7751 to produce the required SET OF.
7754 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
7755 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
7756 files to get correct declarations of the ASN.1 item variables.
7759 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
7760 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
7761 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
7762 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
7763 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
7764 ASN1_ITEM and no wrapper functions.
7767 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
7768 replace the old function pointer based I/O routines. Change most of
7769 the *_d2i_bio() and *_d2i_fp() functions to use these.
7772 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
7773 lines, recognice more "algorithms" that can be deselected, and make
7774 it complain about algorithm deselection that isn't recognised.
7777 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
7778 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
7779 to use new functions. Add NO_ASN1_OLD which can be set to remove
7780 some old style ASN1 functions: this can be used to determine if old
7781 code will still work when these eventually go away.
7784 *) New extension functions for OCSP structures, these follow the
7785 same conventions as certificates and CRLs.
7788 *) New function X509V3_add1_i2d(). This automatically encodes and
7789 adds an extension. Its behaviour can be customised with various
7790 flags to append, replace or delete. Various wrappers added for
7791 certificates and CRLs.
7794 *) Fix to avoid calling the underlying ASN1 print routine when
7795 an extension cannot be parsed. Correct a typo in the
7796 OCSP_SERVICELOC extension. Tidy up print OCSP format.
7799 *) Make mkdef.pl parse some of the ASN1 macros and add appropriate
7800 entries for variables.
7803 *) Add functionality to apps/openssl.c for detecting locking
7804 problems: As the program is single-threaded, all we have
7805 to do is register a locking callback using an array for
7806 storing which locks are currently held by the program.
7809 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
7810 SSL_get_ex_data_X509_STORE_idx(), which is used in
7811 ssl_verify_cert_chain() and thus can be called at any time
7812 during TLS/SSL handshakes so that thread-safety is essential.
7813 Unfortunately, the ex_data design is not at all suited
7814 for multi-threaded use, so it probably should be abolished.
7817 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
7818 [Broadcom, tweaked and integrated by Geoff Thorpe]
7820 *) Move common extension printing code to new function
7821 X509V3_print_extensions(). Reorganise OCSP print routines and
7822 implement some needed OCSP ASN1 functions. Add OCSP extensions.
7825 *) New function X509_signature_print() to remove duplication in some
7829 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
7830 set (this was treated exactly the same as SET OF previously). This
7831 is used to reorder the STACK representing the structure to match the
7832 encoding. This will be used to get round a problem where a PKCS7
7833 structure which was signed could not be verified because the STACK
7834 order did not reflect the encoded order.
7837 *) Reimplement the OCSP ASN1 module using the new code.
7840 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
7841 for its ASN1 operations. The old style function pointers still exist
7842 for now but they will eventually go away.
7845 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
7846 completely replaces the old ASN1 functionality with a table driven
7847 encoder and decoder which interprets an ASN1_ITEM structure describing
7848 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
7849 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
7850 has also been converted to the new form.
7853 *) Change BN_mod_exp_recp so that negative moduli are tolerated
7854 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
7855 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
7856 for negative moduli.
7859 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
7860 of not touching the result's sign bit.
7863 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
7867 *) Changed the LHASH code to use prototypes for callbacks, and created
7868 macros to declare and implement thin (optionally static) functions
7869 that provide type-safety and avoid function pointer casting for the
7870 type-specific callbacks.
7873 *) Added Kerberos Cipher Suites to be used with TLS, as written in
7875 [Veers Staats <staatsvr@asc.hpc.mil>,
7876 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
7878 *) Reformat the FAQ so the different questions and answers can be divided
7879 in sections depending on the subject.
7882 *) Have the zlib compression code load ZLIB.DLL dynamically under
7886 *) New function BN_mod_sqrt for computing square roots modulo a prime
7887 (using the probabilistic Tonelli-Shanks algorithm unless
7888 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
7889 be handled deterministically).
7890 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
7892 *) Make BN_mod_inverse faster by explicitly handling small quotients
7893 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
7894 512 bits], about 30% for larger ones [1024 or 2048 bits].)
7897 *) New function BN_kronecker.
7900 *) Fix BN_gcd so that it works on negative inputs; the result is
7901 positive unless both parameters are zero.
7902 Previously something reasonably close to an infinite loop was
7903 possible because numbers could be growing instead of shrinking
7904 in the implementation of Euclid's algorithm.
7907 *) Fix BN_is_word() and BN_is_one() macros to take into account the
7908 sign of the number in question.
7910 Fix BN_is_word(a,w) to work correctly for w == 0.
7912 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
7913 because its test if the absolute value of 'a' equals 'w'.
7914 Note that BN_abs_is_word does *not* handle w == 0 reliably;
7915 it exists mostly for use in the implementations of BN_is_zero(),
7916 BN_is_one(), and BN_is_word().
7919 *) New function BN_swap.
7922 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
7923 the exponentiation functions are more likely to produce reasonable
7924 results on negative inputs.
7927 *) Change BN_mod_mul so that the result is always non-negative.
7928 Previously, it could be negative if one of the factors was negative;
7929 I don't think anyone really wanted that behaviour.
7932 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
7933 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
7934 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
7935 and add new functions:
7944 BN_mod_lshift1_quick
7948 These functions always generate non-negative results.
7950 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
7951 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
7953 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
7954 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
7955 be reduced modulo m.
7956 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
7959 The following entry accidentally appeared in the CHANGES file
7960 distributed with OpenSSL 0.9.7. The modifications described in
7961 it do *not* apply to OpenSSL 0.9.7.
7963 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
7964 was actually never needed) and in BN_mul(). The removal in BN_mul()
7965 required a small change in bn_mul_part_recursive() and the addition
7966 of the functions bn_cmp_part_words(), bn_sub_part_words() and
7967 bn_add_part_words(), which do the same thing as bn_cmp_words(),
7968 bn_sub_words() and bn_add_words() except they take arrays with
7973 *) In 'openssl passwd', verify passwords read from the terminal
7974 unless the '-salt' option is used (which usually means that
7975 verification would just waste user's time since the resulting
7976 hash is going to be compared with some given password hash)
7977 or the new '-noverify' option is used.
7979 This is an incompatible change, but it does not affect
7980 non-interactive use of 'openssl passwd' (passwords on the command
7981 line, '-stdin' option, '-in ...' option) and thus should not
7985 *) Remove all references to RSAref, since there's no more need for it.
7988 *) Make DSO load along a path given through an environment variable
7989 (SHLIB_PATH) with shl_load().
7992 *) Constify the ENGINE code as a result of BIGNUM constification.
7993 Also constify the RSA code and most things related to it. In a
7994 few places, most notable in the depth of the ASN.1 code, ugly
7995 casts back to non-const were required (to be solved at a later
7999 *) Make it so the openssl application has all engines loaded by default.
8002 *) Constify the BIGNUM routines a little more.
8005 *) Add the following functions:
8007 ENGINE_load_cswift()
8009 ENGINE_load_atalla()
8011 ENGINE_load_builtin_engines()
8013 That way, an application can itself choose if external engines that
8014 are built-in in OpenSSL shall ever be used or not. The benefit is
8015 that applications won't have to be linked with libdl or other dso
8016 libraries unless it's really needed.
8018 Changed 'openssl engine' to load all engines on demand.
8019 Changed the engine header files to avoid the duplication of some
8020 declarations (they differed!).
8023 *) 'openssl engine' can now list capabilities.
8026 *) Better error reporting in 'openssl engine'.
8029 *) Never call load_dh_param(NULL) in s_server.
8032 *) Add engine application. It can currently list engines by name and
8033 identity, and test if they are actually available.
8036 *) Improve RPM specification file by forcing symbolic linking and making
8037 sure the installed documentation is also owned by root.root.
8038 [Damien Miller <djm@mindrot.org>]
8040 *) Give the OpenSSL applications more possibilities to make use of
8041 keys (public as well as private) handled by engines.
8044 *) Add OCSP code that comes from CertCo.
8047 *) Add VMS support for the Rijndael code.
8050 *) Added untested support for Nuron crypto accelerator.
8053 *) Add support for external cryptographic devices. This code was
8054 previously distributed separately as the "engine" branch.
8055 [Geoff Thorpe, Richard Levitte]
8057 *) Rework the filename-translation in the DSO code. It is now possible to
8058 have far greater control over how a "name" is turned into a filename
8059 depending on the operating environment and any oddities about the
8060 different shared library filenames on each system.
8063 *) Support threads on FreeBSD-elf in Configure.
8066 *) Fix for SHA1 assembly problem with MASM: it produces
8067 warnings about corrupt line number information when assembling
8068 with debugging information. This is caused by the overlapping
8070 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
8073 NCONF_get_number() has no error checking at all. As a replacement,
8074 NCONF_get_number_e() is defined (_e for "error checking") and is
8075 promoted strongly. The old NCONF_get_number is kept around for
8076 binary backward compatibility.
8077 Make it possible for methods to load from something other than a BIO,
8078 by providing a function pointer that is given a name instead of a BIO.
8079 For example, this could be used to load configuration data from an
8083 *) Fix for non blocking accept BIOs. Added new I/O special reason
8084 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
8085 with non blocking I/O was not possible because no retry code was
8086 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
8090 *) Added the beginnings of Rijndael support.
8093 *) Fix for bug in DirectoryString mask setting. Add support for
8094 X509_NAME_print_ex() in 'req' and X509_print_ex() function
8095 to allow certificate printing to more controllable, additional
8096 'certopt' option to 'x509' to allow new printing options to be
8100 *) Clean old EAY MD5 hack from e_os.h.
8103 Changes between 0.9.6l and 0.9.6m [17 Mar 2004]
8105 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
8106 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
8107 [Joe Orton, Steve Henson]
8109 Changes between 0.9.6k and 0.9.6l [04 Nov 2003]
8111 *) Fix additional bug revealed by the NISCC test suite:
8113 Stop bug triggering large recursion when presented with
8114 certain ASN.1 tags (CVE-2003-0851)
8117 Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
8119 *) Fix various bugs revealed by running the NISCC test suite:
8121 Stop out of bounds reads in the ASN1 code when presented with
8122 invalid tags (CVE-2003-0543 and CVE-2003-0544).
8124 If verify callback ignores invalid public key errors don't try to check
8125 certificate signature with the NULL public key.
8129 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
8130 if the server requested one: as stated in TLS 1.0 and SSL 3.0
8134 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
8135 extra data after the compression methods not only for TLS 1.0
8136 but also for SSL 3.0 (as required by the specification).
8137 [Bodo Moeller; problem pointed out by Matthias Loepfe]
8139 *) Change X509_certificate_type() to mark the key as exported/exportable
8140 when it's 512 *bits* long, not 512 bytes.
8143 Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
8145 *) Countermeasure against the Klima-Pokorny-Rosa extension of
8146 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
8147 a protocol version number mismatch like a decryption error
8148 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
8151 *) Turn on RSA blinding by default in the default implementation
8152 to avoid a timing attack. Applications that don't want it can call
8153 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
8154 They would be ill-advised to do so in most cases.
8155 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
8157 *) Change RSA blinding code so that it works when the PRNG is not
8158 seeded (in this case, the secret RSA exponent is abused as
8159 an unpredictable seed -- if it is not unpredictable, there
8160 is no point in blinding anyway). Make RSA blinding thread-safe
8161 by remembering the creator's thread ID in rsa->blinding and
8162 having all other threads use local one-time blinding factors
8163 (this requires more computation than sharing rsa->blinding, but
8164 avoids excessive locking; and if an RSA object is not shared
8165 between threads, blinding will still be very fast).
8168 Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
8170 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
8171 via timing by performing a MAC computation even if incorrrect
8172 block cipher padding has been found. This is a countermeasure
8173 against active attacks where the attacker has to distinguish
8174 between bad padding and a MAC verification error. (CVE-2003-0078)
8176 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
8177 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
8178 Martin Vuagnoux (EPFL, Ilion)]
8180 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
8182 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
8183 memory from it's contents. This is done with a counter that will
8184 place alternating values in each byte. This can be used to solve
8185 two issues: 1) the removal of calls to memset() by highly optimizing
8186 compilers, and 2) cleansing with other values than 0, since those can
8187 be read through on certain media, for example a swap space on disk.
8190 *) Bugfix: client side session caching did not work with external caching,
8191 because the session->cipher setting was not restored when reloading
8192 from the external cache. This problem was masked, when
8193 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
8194 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
8197 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
8198 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
8199 [Zeev Lieber <zeev-l@yahoo.com>]
8201 *) Undo an undocumented change introduced in 0.9.6e which caused
8202 repeated calls to OpenSSL_add_all_ciphers() and
8203 OpenSSL_add_all_digests() to be ignored, even after calling
8207 *) Change the default configuration reader to deal with last line not
8208 being properly terminated.
8211 *) Change X509_NAME_cmp() so it applies the special rules on handling
8212 DN values that are of type PrintableString, as well as RDNs of type
8213 emailAddress where the value has the type ia5String.
8214 [stefank@valicert.com via Richard Levitte]
8216 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
8217 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
8218 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
8219 the bitwise-OR of the two for use by the majority of applications
8220 wanting this behaviour, and update the docs. The documented
8221 behaviour and actual behaviour were inconsistent and had been
8222 changing anyway, so this is more a bug-fix than a behavioural
8224 [Geoff Thorpe, diagnosed by Nadav Har'El]
8226 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
8227 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
8230 *) Fix initialization code race conditions in
8231 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
8232 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
8233 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
8234 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
8235 ssl2_get_cipher_by_char(),
8236 ssl3_get_cipher_by_char().
8237 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
8239 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
8240 the cached sessions are flushed, as the remove_cb() might use ex_data
8241 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
8242 (see [openssl.org #212]).
8243 [Geoff Thorpe, Lutz Jaenicke]
8245 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
8246 length, instead of the encoding length to d2i_ASN1_OBJECT.
8249 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
8251 *) [In 0.9.6g-engine release:]
8252 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
8253 [Lynn Gazis <lgazis@rainbow.com>]
8255 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
8257 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
8258 and get fix the header length calculation.
8259 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
8260 Alon Kantor <alonk@checkpoint.com> (and others),
8263 *) Use proper error handling instead of 'assertions' in buffer
8264 overflow checks added in 0.9.6e. This prevents DoS (the
8265 assertions could call abort()).
8266 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
8268 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
8270 *) Add various sanity checks to asn1_get_length() to reject
8271 the ASN1 length bytes if they exceed sizeof(long), will appear
8272 negative or the content length exceeds the length of the
8274 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
8276 *) Fix cipher selection routines: ciphers without encryption had no flags
8277 for the cipher strength set and where therefore not handled correctly
8278 by the selection routines (PR #130).
8281 *) Fix EVP_dsa_sha macro.
8285 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
8286 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
8287 that was added in OpenSSL 0.9.6d.
8289 As the countermeasure turned out to be incompatible with some
8290 broken SSL implementations, the new option is part of SSL_OP_ALL.
8291 SSL_OP_ALL is usually employed when compatibility with weird SSL
8292 implementations is desired (e.g. '-bugs' option to 's_client' and
8293 's_server'), so the new option is automatically set in many
8297 *) Changes in security patch:
8299 Changes marked "(CHATS)" were sponsored by the Defense Advanced
8300 Research Projects Agency (DARPA) and Air Force Research Laboratory,
8301 Air Force Materiel Command, USAF, under agreement number
8304 *) Add various sanity checks to asn1_get_length() to reject
8305 the ASN1 length bytes if they exceed sizeof(long), will appear
8306 negative or the content length exceeds the length of the
8307 supplied buffer. (CVE-2002-0659)
8308 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
8310 *) Assertions for various potential buffer overflows, not known to
8312 [Ben Laurie (CHATS)]
8314 *) Various temporary buffers to hold ASCII versions of integers were
8315 too small for 64 bit platforms. (CVE-2002-0655)
8316 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
8318 *) Remote buffer overflow in SSL3 protocol - an attacker could
8319 supply an oversized session ID to a client. (CVE-2002-0656)
8320 [Ben Laurie (CHATS)]
8322 *) Remote buffer overflow in SSL2 protocol - an attacker could
8323 supply an oversized client master key. (CVE-2002-0656)
8324 [Ben Laurie (CHATS)]
8326 Changes between 0.9.6c and 0.9.6d [9 May 2002]
8328 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
8329 encoded as NULL) with id-dsa-with-sha1.
8330 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
8332 *) Check various X509_...() return values in apps/req.c.
8333 [Nils Larsch <nla@trustcenter.de>]
8335 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
8336 an end-of-file condition would erroneously be flagged, when the CRLF
8337 was just at the end of a processed block. The bug was discovered when
8338 processing data through a buffering memory BIO handing the data to a
8339 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
8340 <ptsekov@syntrex.com> and Nedelcho Stanev.
8343 *) Implement a countermeasure against a vulnerability recently found
8344 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
8345 before application data chunks to avoid the use of known IVs
8346 with data potentially chosen by the attacker.
8349 *) Fix length checks in ssl3_get_client_hello().
8352 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
8353 to prevent ssl3_read_internal() from incorrectly assuming that
8354 ssl3_read_bytes() found application data while handshake
8355 processing was enabled when in fact s->s3->in_read_app_data was
8356 merely automatically cleared during the initial handshake.
8357 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
8359 *) Fix object definitions for Private and Enterprise: they were not
8360 recognized in their shortname (=lowercase) representation. Extend
8361 obj_dat.pl to issue an error when using undefined keywords instead
8362 of silently ignoring the problem (Svenning Sorensen
8363 <sss@sss.dnsalias.net>).
8366 *) Fix DH_generate_parameters() so that it works for 'non-standard'
8367 generators, i.e. generators other than 2 and 5. (Previously, the
8368 code did not properly initialise the 'add' and 'rem' values to
8369 BN_generate_prime().)
8371 In the new general case, we do not insist that 'generator' is
8372 actually a primitive root: This requirement is rather pointless;
8373 a generator of the order-q subgroup is just as good, if not
8377 *) Map new X509 verification errors to alerts. Discovered and submitted by
8378 Tom Wu <tom@arcot.com>.
8381 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
8382 returning non-zero before the data has been completely received
8383 when using non-blocking I/O.
8384 [Bodo Moeller; problem pointed out by John Hughes]
8386 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
8387 [Ben Laurie, Lutz Jaenicke]
8389 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
8390 Yoram Zahavi <YoramZ@gilian.com>).
8393 *) Add information about CygWin 1.3 and on, and preserve proper
8394 configuration for the versions before that.
8395 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
8397 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
8398 check whether we deal with a copy of a session and do not delete from
8399 the cache in this case. Problem reported by "Izhar Shoshani Levi"
8400 <izhar@checkpoint.com>.
8403 *) Do not store session data into the internal session cache, if it
8404 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
8405 flag is set). Proposed by Aslam <aslam@funk.com>.
8408 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
8412 *) [In 0.9.6d-engine release:]
8413 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
8414 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
8416 *) Add the configuration target linux-s390x.
8417 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
8419 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
8420 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
8421 variable as an indication that a ClientHello message has been
8422 received. As the flag value will be lost between multiple
8423 invocations of ssl3_accept when using non-blocking I/O, the
8424 function may not be aware that a handshake has actually taken
8425 place, thus preventing a new session from being added to the
8428 To avoid this problem, we now set s->new_session to 2 instead of
8429 using a local variable.
8430 [Lutz Jaenicke, Bodo Moeller]
8432 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
8433 if the SSL_R_LENGTH_MISMATCH error is detected.
8434 [Geoff Thorpe, Bodo Moeller]
8436 *) New 'shared_ldflag' column in Configure platform table.
8439 *) Fix EVP_CIPHER_mode macro.
8440 ["Dan S. Camper" <dan@bti.net>]
8442 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
8443 type, we must throw them away by setting rr->length to 0.
8444 [D P Chang <dpc@qualys.com>]
8446 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
8448 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
8449 <Dominikus.Scherkl@biodata.com>. (The previous implementation
8450 worked incorrectly for those cases where range = 10..._2 and
8451 3*range is two bits longer than range.)
8454 *) Only add signing time to PKCS7 structures if it is not already
8458 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
8459 OBJ_ld_ce should be OBJ_id_ce.
8460 Also some ip-pda OIDs in crypto/objects/objects.txt were
8461 incorrect (cf. RFC 3039).
8462 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
8464 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
8465 returns early because it has nothing to do.
8466 [Andy Schneider <andy.schneider@bjss.co.uk>]
8468 *) [In 0.9.6c-engine release:]
8469 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
8470 [Andy Schneider <andy.schneider@bjss.co.uk>]
8472 *) [In 0.9.6c-engine release:]
8473 Add support for Cryptographic Appliance's keyserver technology.
8474 (Use engine 'keyclient')
8475 [Cryptographic Appliances and Geoff Thorpe]
8477 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
8478 is called via tools/c89.sh because arguments have to be
8479 rearranged (all '-L' options must appear before the first object
8481 [Richard Shapiro <rshapiro@abinitio.com>]
8483 *) [In 0.9.6c-engine release:]
8484 Add support for Broadcom crypto accelerator cards, backported
8486 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
8488 *) [In 0.9.6c-engine release:]
8489 Add support for SureWare crypto accelerator cards from
8490 Baltimore Technologies. (Use engine 'sureware')
8491 [Baltimore Technologies and Mark Cox]
8493 *) [In 0.9.6c-engine release:]
8494 Add support for crypto accelerator cards from Accelerated
8495 Encryption Processing, www.aep.ie. (Use engine 'aep')
8496 [AEP Inc. and Mark Cox]
8498 *) Add a configuration entry for gcc on UnixWare.
8499 [Gary Benson <gbenson@redhat.com>]
8501 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
8502 messages are stored in a single piece (fixed-length part and
8503 variable-length part combined) and fix various bugs found on the way.
8506 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
8507 instead. BIO_gethostbyname() does not know what timeouts are
8508 appropriate, so entries would stay in cache even when they have
8510 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
8512 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
8513 faced with a pathologically small ClientHello fragment that does
8514 not contain client_version: Instead of aborting with an error,
8515 simply choose the highest available protocol version (i.e.,
8516 TLS 1.0 unless it is disabled). In practice, ClientHello
8517 messages are never sent like this, but this change gives us
8518 strictly correct behaviour at least for TLS.
8521 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
8522 never resets s->method to s->ctx->method when called from within
8523 one of the SSL handshake functions.
8524 [Bodo Moeller; problem pointed out by Niko Baric]
8526 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
8527 (sent using the client's version number) if client_version is
8528 smaller than the protocol version in use. Also change
8529 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
8530 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
8531 the client will at least see that alert.
8534 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
8538 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
8539 client receives HelloRequest while in a handshake.
8540 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
8542 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
8543 should end in 'break', not 'goto end' which circumvents various
8544 cleanups done in state SSL_ST_OK. But session related stuff
8545 must be disabled for SSL_ST_OK in the case that we just sent a
8548 Also avoid some overhead by not calling ssl_init_wbio_buffer()
8549 before just sending a HelloRequest.
8550 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
8552 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
8553 reveal whether illegal block cipher padding was found or a MAC
8554 verification error occurred. (Neither SSLerr() codes nor alerts
8555 are directly visible to potential attackers, but the information
8556 may leak via logfiles.)
8558 Similar changes are not required for the SSL 2.0 implementation
8559 because the number of padding bytes is sent in clear for SSL 2.0,
8560 and the extra bytes are just ignored. However ssl/s2_pkt.c
8561 failed to verify that the purported number of padding bytes is in
8565 *) Add OpenUNIX-8 support including shared libraries
8566 (Boyd Lynn Gerber <gerberb@zenez.com>).
8569 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
8570 'wristwatch attack' using huge encoding parameters (cf.
8571 James H. Manger's CRYPTO 2001 paper). Note that the
8572 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
8573 encoding parameters and hence was not vulnerable.
8576 *) BN_sqr() bug fix.
8577 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
8579 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
8580 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
8581 followed by modular reduction.
8582 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
8584 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
8585 equivalent based on BN_pseudo_rand() instead of BN_rand().
8588 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
8589 This function was broken, as the check for a new client hello message
8590 to handle SGC did not allow these large messages.
8591 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
8594 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
8597 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
8598 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
8601 *) Rework the configuration and shared library support for Tru64 Unix.
8602 The configuration part makes use of modern compiler features and
8603 still retains old compiler behavior for those that run older versions
8604 of the OS. The shared library support part includes a variant that
8605 uses the RPATH feature, and is available through the special
8606 configuration target "alpha-cc-rpath", which will never be selected
8608 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
8610 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
8611 with the same message size as in ssl3_get_certificate_request().
8612 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
8613 messages might inadvertently be reject as too long.
8614 [Petr Lampa <lampa@fee.vutbr.cz>]
8616 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
8619 *) Modified SSL library such that the verify_callback that has been set
8620 specificly for an SSL object with SSL_set_verify() is actually being
8621 used. Before the change, a verify_callback set with this function was
8622 ignored and the verify_callback() set in the SSL_CTX at the time of
8623 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
8624 to allow the necessary settings.
8627 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
8628 explicitly to NULL, as at least on Solaris 8 this seems not always to be
8629 done automatically (in contradiction to the requirements of the C
8630 standard). This made problems when used from OpenSSH.
8633 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
8634 dh->length and always used
8636 BN_rand_range(priv_key, dh->p).
8638 BN_rand_range() is not necessary for Diffie-Hellman, and this
8639 specific range makes Diffie-Hellman unnecessarily inefficient if
8640 dh->length (recommended exponent length) is much smaller than the
8641 length of dh->p. We could use BN_rand_range() if the order of
8642 the subgroup was stored in the DH structure, but we only have
8647 BN_rand(priv_key, l, ...)
8649 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
8655 RSA_eay_public_encrypt
8656 RSA_eay_private_decrypt
8657 RSA_eay_private_encrypt (signing)
8658 RSA_eay_public_decrypt (signature verification)
8660 (default implementations for RSA_public_encrypt,
8661 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
8662 always reject numbers >= n.
8665 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
8666 to synchronize access to 'locking_thread'. This is necessary on
8667 systems where access to 'locking_thread' (an 'unsigned long'
8668 variable) is not atomic.
8671 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
8672 *before* setting the 'crypto_lock_rand' flag. The previous code had
8673 a race condition if 0 is a valid thread ID.
8674 [Travis Vitek <vitek@roguewave.com>]
8676 *) Add support for shared libraries under Irix.
8677 [Albert Chin-A-Young <china@thewrittenword.com>]
8679 *) Add configuration option to build on Linux on both big-endian and
8681 [Ralf Baechle <ralf@uni-koblenz.de>]
8683 *) Add the possibility to create shared libraries on HP-UX.
8686 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
8688 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
8689 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
8690 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
8691 PRNG state recovery was possible based on the output of
8692 one PRNG request appropriately sized to gain knowledge on
8693 'md' followed by enough consecutive 1-byte PRNG requests
8694 to traverse all of 'state'.
8696 1. When updating 'md_local' (the current thread's copy of 'md')
8697 during PRNG output generation, hash all of the previous
8698 'md_local' value, not just the half used for PRNG output.
8700 2. Make the number of bytes from 'state' included into the hash
8701 independent from the number of PRNG bytes requested.
8703 The first measure alone would be sufficient to avoid
8704 Markku-Juhani's attack. (Actually it had never occurred
8705 to me that the half of 'md_local' used for chaining was the
8706 half from which PRNG output bytes were taken -- I had always
8707 assumed that the secret half would be used.) The second
8708 measure makes sure that additional data from 'state' is never
8709 mixed into 'md_local' in small portions; this heuristically
8710 further strengthens the PRNG.
8713 *) Fix crypto/bn/asm/mips3.s.
8716 *) When only the key is given to "enc", the IV is undefined. Print out
8717 an error message in this case.
8720 *) Handle special case when X509_NAME is empty in X509 printing routines.
8723 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
8724 positive and less than q.
8727 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
8728 used: it isn't thread safe and the add_lock_callback should handle
8730 [Paul Rose <Paul.Rose@bridge.com>]
8732 *) Verify that incoming data obeys the block size in
8733 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
8737 [Ulf Möller, Bodo Möller]
8739 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
8740 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
8741 when fixing the server behaviour for backwards-compatible 'client
8742 hello' messages. (Note that the attack is impractical against
8743 SSL 3.0 and TLS 1.0 anyway because length and version checking
8744 means that the probability of guessing a valid ciphertext is
8745 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
8748 Before 0.9.5, the countermeasure (hide the error by generating a
8749 random 'decryption result') did not work properly because
8750 ERR_clear_error() was missing, meaning that SSL_get_error() would
8751 detect the supposedly ignored error.
8753 Both problems are now fixed.
8756 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
8757 (previously it was 1024).
8760 *) Fix for compatibility mode trust settings: ignore trust settings
8761 unless some valid trust or reject settings are present.
8764 *) Fix for blowfish EVP: its a variable length cipher.
8767 *) Fix various bugs related to DSA S/MIME verification. Handle missing
8768 parameters in DSA public key structures and return an error in the
8769 DSA routines if parameters are absent.
8772 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
8773 in the current directory if neither $RANDFILE nor $HOME was set.
8774 RAND_file_name() in 0.9.6a returned NULL in this case. This has
8775 caused some confusion to Windows users who haven't defined $HOME.
8776 Thus RAND_file_name() is changed again: e_os.h can define a
8777 DEFAULT_HOME, which will be used if $HOME is not set.
8778 For Windows, we use "C:"; on other platforms, we still require
8779 environment variables.
8781 *) Move 'if (!initialized) RAND_poll()' into regions protected by
8782 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
8783 having multiple threads call RAND_poll() concurrently.
8786 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
8787 combination of a flag and a thread ID variable.
8788 Otherwise while one thread is in ssleay_rand_bytes (which sets the
8789 flag), *other* threads can enter ssleay_add_bytes without obeying
8790 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
8791 that they do not hold after the first thread unsets add_do_not_lock).
8794 *) Change bctest again: '-x' expressions are not available in all
8798 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
8800 *) Fix a couple of memory leaks in PKCS7_dataDecode()
8801 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
8803 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
8804 the default extension for executables, if any. Also, make the perl
8805 scripts that use symlink() to test if it really exists and use "cp"
8806 if it doesn't. All this made OpenSSL compilable and installable in
8810 *) Fix for asn1_GetSequence() for indefinite length constructed data.
8811 If SEQUENCE is length is indefinite just set c->slen to the total
8812 amount of data available.
8813 [Steve Henson, reported by shige@FreeBSD.org]
8814 [This change does not apply to 0.9.7.]
8816 *) Change bctest to avoid here-documents inside command substitution
8817 (workaround for FreeBSD /bin/sh bug).
8818 For compatibility with Ultrix, avoid shell functions (introduced
8819 in the bctest version that searches along $PATH).
8822 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
8823 with des_encrypt() defined on some operating systems, like Solaris
8827 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
8828 On the Importance of Eliminating Errors in Cryptographic
8829 Computations, J. Cryptology 14 (2001) 2, 101-119,
8830 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
8833 *) MIPS assembler BIGNUM division bug fix.
8836 *) Disabled incorrect Alpha assembler code.
8839 *) Fix PKCS#7 decode routines so they correctly update the length
8840 after reading an EOC for the EXPLICIT tag.
8842 [This change does not apply to 0.9.7.]
8844 *) Fix bug in PKCS#12 key generation routines. This was triggered
8845 if a 3DES key was generated with a 0 initial byte. Include
8846 PKCS12_BROKEN_KEYGEN compilation option to retain the old
8847 (but broken) behaviour.
8850 *) Enhance bctest to search for a working bc along $PATH and print
8852 [Tim Rice <tim@multitalents.net> via Richard Levitte]
8854 *) Fix memory leaks in err.c: free err_data string if necessary;
8855 don't write to the wrong index in ERR_set_error_data.
8858 *) Implement ssl23_peek (analogous to ssl23_read), which previously
8862 *) Replace rdtsc with _emit statements for VC++ version 5.
8863 [Jeremy Cooper <jeremy@baymoo.org>]
8865 *) Make it possible to reuse SSLv2 sessions.
8868 *) In copy_email() check for >= 0 as a return value for
8869 X509_NAME_get_index_by_NID() since 0 is a valid index.
8870 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
8872 *) Avoid coredump with unsupported or invalid public keys by checking if
8873 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
8874 PKCS7_verify() fails with non detached data.
8877 *) Don't use getenv in library functions when run as setuid/setgid.
8878 New function OPENSSL_issetugid().
8881 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
8882 due to incorrect handling of multi-threading:
8884 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
8886 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
8888 3. Count how many times MemCheck_off() has been called so that
8889 nested use can be treated correctly. This also avoids
8890 inband-signalling in the previous code (which relied on the
8891 assumption that thread ID 0 is impossible).
8894 *) Add "-rand" option also to s_client and s_server.
8897 *) Fix CPU detection on Irix 6.x.
8898 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
8899 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
8901 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
8904 [This change does not apply to 0.9.7.]
8906 *) Use the cached encoding of an X509_NAME structure rather than
8907 copying it. This is apparently the reason for the libsafe "errors"
8908 but the code is actually correct.
8911 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
8912 Bleichenbacher's DSA attack.
8913 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
8914 to be set and top=0 forces the highest bit to be set; top=-1 is new
8915 and leaves the highest bit random.
8916 [Ulf Moeller, Bodo Moeller]
8918 *) In the NCONF_...-based implementations for CONF_... queries
8919 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
8920 a temporary CONF structure with the data component set to NULL
8921 (which gives segmentation faults in lh_retrieve).
8922 Instead, use NULL for the CONF pointer in CONF_get_string and
8923 CONF_get_number (which may use environment variables) and directly
8924 return NULL from CONF_get_section.
8927 *) Fix potential buffer overrun for EBCDIC.
8930 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
8931 keyUsage if basicConstraints absent for a CA.
8934 *) Make SMIME_write_PKCS7() write mail header values with a format that
8935 is more generally accepted (no spaces before the semicolon), since
8936 some programs can't parse those values properly otherwise. Also make
8937 sure BIO's that break lines after each write do not create invalid
8941 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
8942 macros previously used would not encode an empty SEQUENCE OF
8943 and break the signature.
8945 [This change does not apply to 0.9.7.]
8947 *) Zero the premaster secret after deriving the master secret in
8951 *) Add some EVP_add_digest_alias registrations (as found in
8952 OpenSSL_add_all_digests()) to SSL_library_init()
8953 aka OpenSSL_add_ssl_algorithms(). This provides improved
8954 compatibility with peers using X.509 certificates
8955 with unconventional AlgorithmIdentifier OIDs.
8958 *) Fix for Irix with NO_ASM.
8959 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
8961 *) ./config script fixes.
8962 [Ulf Moeller, Richard Levitte]
8964 *) Fix 'openssl passwd -1'.
8967 *) Change PKCS12_key_gen_asc() so it can cope with non null
8968 terminated strings whose length is passed in the passlen
8969 parameter, for example from PEM callbacks. This was done
8970 by adding an extra length parameter to asc2uni().
8971 [Steve Henson, reported by <oddissey@samsung.co.kr>]
8973 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
8974 call failed, free the DSA structure.
8977 *) Fix to uni2asc() to cope with zero length Unicode strings.
8978 These are present in some PKCS#12 files.
8981 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
8982 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
8983 when writing a 32767 byte record.
8984 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
8986 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
8987 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
8989 (RSA objects have a reference count access to which is protected
8990 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
8991 so they are meant to be shared between threads.)
8992 [Bodo Moeller, Geoff Thorpe; original patch submitted by
8993 "Reddie, Steven" <Steven.Reddie@ca.com>]
8995 *) Fix a deadlock in CRYPTO_mem_leaks().
8998 *) Use better test patterns in bntest.
9001 *) rand_win.c fix for Borland C.
9004 *) BN_rshift bugfix for n == 0.
9007 *) Add a 'bctest' script that checks for some known 'bc' bugs
9008 so that 'make test' does not abort just because 'bc' is broken.
9011 *) Store verify_result within SSL_SESSION also for client side to
9012 avoid potential security hole. (Re-used sessions on the client side
9013 always resulted in verify_result==X509_V_OK, not using the original
9014 result of the server certificate verification.)
9017 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
9018 SSL3_RT_APPLICATION_DATA, return 0.
9019 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
9023 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
9024 releases, have been re-implemented by renaming the previous
9025 implementations of ssl2_read and ssl3_read to ssl2_read_internal
9026 and ssl3_read_internal, respectively, and adding 'peek' parameters
9027 to them. The new ssl[23]_{read,peek} functions are calls to
9028 ssl[23]_read_internal with the 'peek' flag set appropriately.
9029 A 'peek' parameter has also been added to ssl3_read_bytes, which
9030 does the actual work for ssl3_read_internal.
9033 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
9034 the method-specific "init()" handler. Also clean up ex_data after
9035 calling the method-specific "finish()" handler. Previously, this was
9036 happening the other way round.
9039 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
9040 The previous value, 12, was not always sufficient for BN_mod_exp().
9043 *) Make sure that shared libraries get the internal name engine with
9044 the full version number and not just 0. This should mark the
9045 shared libraries as not backward compatible. Of course, this should
9046 be changed again when we can guarantee backward binary compatibility.
9049 *) Fix typo in get_cert_by_subject() in by_dir.c
9050 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
9052 *) Rework the system to generate shared libraries:
9054 - Make note of the expected extension for the shared libraries and
9055 if there is a need for symbolic links from for example libcrypto.so.0
9056 to libcrypto.so.0.9.7. There is extended info in Configure for
9059 - Make as few rebuilds of the shared libraries as possible.
9061 - Still avoid linking the OpenSSL programs with the shared libraries.
9063 - When installing, install the shared libraries separately from the
9067 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
9069 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
9070 and not in SSL_clear because the latter is also used by the
9071 accept/connect functions; previously, the settings made by
9072 SSL_set_read_ahead would be lost during the handshake.
9073 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
9075 *) Correct util/mkdef.pl to be selective about disabled algorithms.
9076 Previously, it would create entries for disabled algorithms no
9080 *) Added several new manual pages for SSL_* function.
9083 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
9085 *) In ssl23_get_client_hello, generate an error message when faced
9086 with an initial SSL 3.0/TLS record that is too small to contain the
9087 first two bytes of the ClientHello message, i.e. client_version.
9088 (Note that this is a pathologic case that probably has never happened
9089 in real life.) The previous approach was to use the version number
9090 from the record header as a substitute; but our protocol choice
9091 should not depend on that one because it is not authenticated
9092 by the Finished messages.
9095 *) More robust randomness gathering functions for Windows.
9096 [Jeffrey Altman <jaltman@columbia.edu>]
9098 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
9099 not set then we don't setup the error code for issuer check errors
9100 to avoid possibly overwriting other errors which the callback does
9101 handle. If an application does set the flag then we assume it knows
9102 what it is doing and can handle the new informational codes
9106 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
9107 a general "ANY" type, as such it should be able to decode anything
9108 including tagged types. However it didn't check the class so it would
9109 wrongly interpret tagged types in the same way as their universal
9110 counterpart and unknown types were just rejected. Changed so that the
9111 tagged and unknown types are handled in the same way as a SEQUENCE:
9112 that is the encoding is stored intact. There is also a new type
9113 "V_ASN1_OTHER" which is used when the class is not universal, in this
9114 case we have no idea what the actual type is so we just lump them all
9118 *) On VMS, stdout may very well lead to a file that is written to
9119 in a record-oriented fashion. That means that every write() will
9120 write a separate record, which will be read separately by the
9121 programs trying to read from it. This can be very confusing.
9123 The solution is to put a BIO filter in the way that will buffer
9124 text until a linefeed is reached, and then write everything a
9125 line at a time, so every record written will be an actual line,
9126 not chunks of lines and not (usually doesn't happen, but I've
9127 seen it once) several lines in one record. BIO_f_linebuffer() is
9130 Currently, it's a VMS-only method, because that's where it has
9131 been tested well enough.
9134 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
9135 it can return incorrect results.
9136 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
9137 but it was in 0.9.6-beta[12].)
9140 *) Disable the check for content being present when verifying detached
9141 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
9142 include zero length content when signing messages.
9145 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
9146 BIO_ctrl (for BIO pairs).
9149 *) Add DSO method for VMS.
9152 *) Bug fix: Montgomery multiplication could produce results with the
9156 *) Add RPM specification openssl.spec and modify it to build three
9157 packages. The default package contains applications, application
9158 documentation and run-time libraries. The devel package contains
9159 include files, static libraries and function documentation. The
9160 doc package contains the contents of the doc directory. The original
9161 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
9164 *) Add a large number of documentation files for many SSL routines.
9165 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
9167 *) Add a configuration entry for Sony News 4.
9168 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
9170 *) Don't set the two most significant bits to one when generating a
9171 random number < q in the DSA library.
9174 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
9175 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
9176 the underlying transport is blocking) if a handshake took place.
9177 (The default behaviour is needed by applications such as s_client
9178 and s_server that use select() to determine when to use SSL_read;
9179 but for applications that know in advance when to expect data, it
9180 just makes things more complicated.)
9183 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
9187 *) Add a few more EBCDIC conditionals that make `req' and `x509'
9188 work better on such systems.
9189 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
9191 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
9192 Update PKCS12_parse() so it copies the friendlyName and the
9193 keyid to the certificates aux info.
9196 *) Fix bug in PKCS7_verify() which caused an infinite loop
9197 if there was more than one signature.
9198 [Sven Uszpelkat <su@celocom.de>]
9200 *) Major change in util/mkdef.pl to include extra information
9201 about each symbol, as well as presenting variables as well
9202 as functions. This change means that there's n more need
9203 to rebuild the .num files when some algorithms are excluded.
9206 *) Allow the verify time to be set by an application,
9207 rather than always using the current time.
9210 *) Phase 2 verify code reorganisation. The certificate
9211 verify code now looks up an issuer certificate by a
9212 number of criteria: subject name, authority key id
9213 and key usage. It also verifies self signed certificates
9214 by the same criteria. The main comparison function is
9215 X509_check_issued() which performs these checks.
9217 Lot of changes were necessary in order to support this
9218 without completely rewriting the lookup code.
9220 Authority and subject key identifier are now cached.
9222 The LHASH 'certs' is X509_STORE has now been replaced
9223 by a STACK_OF(X509_OBJECT). This is mainly because an
9224 LHASH can't store or retrieve multiple objects with
9225 the same hash value.
9227 As a result various functions (which were all internal
9228 use only) have changed to handle the new X509_STORE
9229 structure. This will break anything that messed round
9230 with X509_STORE internally.
9232 The functions X509_STORE_add_cert() now checks for an
9233 exact match, rather than just subject name.
9235 The X509_STORE API doesn't directly support the retrieval
9236 of multiple certificates matching a given criteria, however
9237 this can be worked round by performing a lookup first
9238 (which will fill the cache with candidate certificates)
9239 and then examining the cache for matches. This is probably
9240 the best we can do without throwing out X509_LOOKUP
9241 entirely (maybe later...).
9243 The X509_VERIFY_CTX structure has been enhanced considerably.
9245 All certificate lookup operations now go via a get_issuer()
9246 callback. Although this currently uses an X509_STORE it
9247 can be replaced by custom lookups. This is a simple way
9248 to bypass the X509_STORE hackery necessary to make this
9249 work and makes it possible to use more efficient techniques
9250 in future. A very simple version which uses a simple
9251 STACK for its trusted certificate store is also provided
9252 using X509_STORE_CTX_trusted_stack().
9254 The verify_cb() and verify() callbacks now have equivalents
9255 in the X509_STORE_CTX structure.
9257 X509_STORE_CTX also has a 'flags' field which can be used
9258 to customise the verify behaviour.
9261 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
9262 excludes S/MIME capabilities.
9265 *) When a certificate request is read in keep a copy of the
9266 original encoding of the signed data and use it when outputting
9267 again. Signatures then use the original encoding rather than
9268 a decoded, encoded version which may cause problems if the
9269 request is improperly encoded.
9272 *) For consistency with other BIO_puts implementations, call
9273 buffer_write(b, ...) directly in buffer_puts instead of calling
9276 In BIO_puts, increment b->num_write as in BIO_write.
9277 [Peter.Sylvester@EdelWeb.fr]
9279 *) Fix BN_mul_word for the case where the word is 0. (We have to use
9280 BN_zero, we may not return a BIGNUM with an array consisting of
9284 *) Avoid calling abort() from within the library when problems are
9285 detected, except if preprocessor symbols have been defined
9286 (such as REF_CHECK, BN_DEBUG etc.).
9289 *) New openssl application 'rsautl'. This utility can be
9290 used for low level RSA operations. DER public key
9291 BIO/fp routines also added.
9294 *) New Configure entry and patches for compiling on QNX 4.
9295 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
9297 *) A demo state-machine implementation was sponsored by
9298 Nuron (http://www.nuron.com/) and is now available in
9299 demos/state_machine.
9302 *) New options added to the 'dgst' utility for signature
9303 generation and verification.
9306 *) Unrecognized PKCS#7 content types are now handled via a
9307 catch all ASN1_TYPE structure. This allows unsupported
9308 types to be stored as a "blob" and an application can
9309 encode and decode it manually.
9312 *) Fix various signed/unsigned issues to make a_strex.c
9314 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
9316 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
9317 length if passed a buffer. ASN1_INTEGER_to_BN failed
9318 if passed a NULL BN and its argument was negative.
9319 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
9321 *) Modification to PKCS#7 encoding routines to output definite
9322 length encoding. Since currently the whole structures are in
9323 memory there's not real point in using indefinite length
9324 constructed encoding. However if OpenSSL is compiled with
9325 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
9328 *) Added BIO_vprintf() and BIO_vsnprintf().
9331 *) Added more prefixes to parse for in the the strings written
9332 through a logging bio, to cover all the levels that are available
9333 through syslog. The prefixes are now:
9335 PANIC, EMERG, EMR => LOG_EMERG
9336 ALERT, ALR => LOG_ALERT
9337 CRIT, CRI => LOG_CRIT
9338 ERROR, ERR => LOG_ERR
9339 WARNING, WARN, WAR => LOG_WARNING
9340 NOTICE, NOTE, NOT => LOG_NOTICE
9341 INFO, INF => LOG_INFO
9342 DEBUG, DBG => LOG_DEBUG
9344 and as before, if none of those prefixes are present at the
9345 beginning of the string, LOG_ERR is chosen.
9347 On Win32, the LOG_* levels are mapped according to this:
9349 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
9350 LOG_WARNING => EVENTLOG_WARNING_TYPE
9351 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
9355 *) Made it possible to reconfigure with just the configuration
9356 argument "reconf" or "reconfigure". The command line arguments
9357 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
9358 and are retrieved from there when reconfiguring.
9362 [Assar Westerlund <assar@sics.se>, Richard Levitte]
9364 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
9367 *) The obj_dat.pl script was messing up the sorting of object
9368 names. The reason was that it compared the quoted version
9369 of strings as a result "OCSP" > "OCSP Signing" because
9370 " > SPACE. Changed script to store unquoted versions of
9371 names and add quotes on output. It was also omitting some
9372 names from the lookup table if they were given a default
9373 value (that is if SN is missing it is given the same
9374 value as LN and vice versa), these are now added on the
9375 grounds that if an object has a name we should be able to
9376 look it up. Finally added warning output when duplicate
9377 short or long names are found.
9380 *) Changes needed for Tandem NSK.
9381 [Scott Uroff <scott@xypro.com>]
9383 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
9384 RSA_padding_check_SSLv23(), special padding was never detected
9385 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
9386 version rollback attacks was not effective.
9388 In s23_clnt.c, don't use special rollback-attack detection padding
9389 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
9390 client; similarly, in s23_srvr.c, don't do the rollback check if
9391 SSL 2.0 is the only protocol enabled in the server.
9394 *) Make it possible to get hexdumps of unprintable data with 'openssl
9395 asn1parse'. By implication, the functions ASN1_parse_dump() and
9396 BIO_dump_indent() are added.
9399 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
9400 these print out strings and name structures based on various
9401 flags including RFC2253 support and proper handling of
9402 multibyte characters. Added options to the 'x509' utility
9403 to allow the various flags to be set.
9406 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
9407 Also change the functions X509_cmp_current_time() and
9408 X509_gmtime_adj() work with an ASN1_TIME structure,
9409 this will enable certificates using GeneralizedTime in validity
9410 dates to be checked.
9413 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
9414 negative public key encodings) on by default,
9415 NO_NEG_PUBKEY_BUG can be set to disable it.
9418 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
9419 content octets. An i2c_ASN1_OBJECT is unnecessary because
9420 the encoding can be trivially obtained from the structure.
9423 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
9424 not read locks (CRYPTO_r_[un]lock).
9427 *) A first attempt at creating official support for shared
9428 libraries through configuration. I've kept it so the
9429 default is static libraries only, and the OpenSSL programs
9430 are always statically linked for now, but there are
9431 preparations for dynamic linking in place.
9432 This has been tested on Linux and Tru64.
9435 *) Randomness polling function for Win9x, as described in:
9436 Peter Gutmann, Software Generation of Practically Strong
9440 *) Fix so PRNG is seeded in req if using an already existing
9444 *) New options to smime application. -inform and -outform
9445 allow alternative formats for the S/MIME message including
9446 PEM and DER. The -content option allows the content to be
9447 specified separately. This should allow things like Netscape
9448 form signing output easier to verify.
9451 *) Fix the ASN1 encoding of tags using the 'long form'.
9454 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
9455 STRING types. These convert content octets to and from the
9456 underlying type. The actual tag and length octets are
9457 already assumed to have been read in and checked. These
9458 are needed because all other string types have virtually
9459 identical handling apart from the tag. By having versions
9460 of the ASN1 functions that just operate on content octets
9461 IMPLICIT tagging can be handled properly. It also allows
9462 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
9463 and ASN1_INTEGER are identical apart from the tag.
9466 *) Change the handling of OID objects as follows:
9468 - New object identifiers are inserted in objects.txt, following
9469 the syntax given in objects.README.
9470 - objects.pl is used to process obj_mac.num and create a new
9472 - obj_dat.pl is used to create a new obj_dat.h, using the data in
9475 This is currently kind of a hack, and the perl code in objects.pl
9476 isn't very elegant, but it works as I intended. The simplest way
9477 to check that it worked correctly is to look in obj_dat.h and
9478 check the array nid_objs and make sure the objects haven't moved
9479 around (this is important!). Additions are OK, as well as
9480 consistent name changes.
9483 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
9486 *) Addition of the command line parameter '-rand file' to 'openssl req'.
9487 The given file adds to whatever has already been seeded into the
9488 random pool through the RANDFILE configuration file option or
9489 environment variable, or the default random state file.
9492 *) mkstack.pl now sorts each macro group into lexical order.
9493 Previously the output order depended on the order the files
9494 appeared in the directory, resulting in needless rewriting
9498 *) Patches to make OpenSSL compile under Win32 again. Mostly
9499 work arounds for the VC++ problem that it treats func() as
9500 func(void). Also stripped out the parts of mkdef.pl that
9501 added extra typesafe functions: these no longer exist.
9504 *) Reorganisation of the stack code. The macros are now all
9505 collected in safestack.h . Each macro is defined in terms of
9506 a "stack macro" of the form SKM_<name>(type, a, b). The
9507 DEBUG_SAFESTACK is now handled in terms of function casts,
9508 this has the advantage of retaining type safety without the
9509 use of additional functions. If DEBUG_SAFESTACK is not defined
9510 then the non typesafe macros are used instead. Also modified the
9511 mkstack.pl script to handle the new form. Needs testing to see
9512 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
9513 the default if no major problems. Similar behaviour for ASN1_SET_OF
9514 and PKCS12_STACK_OF.
9517 *) When some versions of IIS use the 'NET' form of private key the
9518 key derivation algorithm is different. Normally MD5(password) is
9519 used as a 128 bit RC4 key. In the modified case
9520 MD5(MD5(password) + "SGCKEYSALT") is used instead. Added some
9521 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
9522 as the old Netscape_RSA functions except they have an additional
9523 'sgckey' parameter which uses the modified algorithm. Also added
9524 an -sgckey command line option to the rsa utility. Thanks to
9525 Adrian Peck <bertie@ncipher.com> for posting details of the modified
9526 algorithm to openssl-dev.
9529 *) The evp_local.h macros were using 'c.##kname' which resulted in
9530 invalid expansion on some systems (SCO 5.0.5 for example).
9531 Corrected to 'c.kname'.
9532 [Phillip Porch <root@theporch.com>]
9534 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
9535 a STACK of email addresses from a certificate or request, these look
9536 in the subject name and the subject alternative name extensions and
9537 omit any duplicate addresses.
9540 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
9541 This makes DSA verification about 2 % faster.
9544 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
9545 (meaning that now 2^5 values will be precomputed, which is only 4 KB
9546 plus overhead for 1024 bit moduli).
9547 This makes exponentiations about 0.5 % faster for 1024 bit
9548 exponents (as measured by "openssl speed rsa2048").
9551 *) Rename memory handling macros to avoid conflicts with other
9553 Malloc => OPENSSL_malloc
9554 Malloc_locked => OPENSSL_malloc_locked
9555 Realloc => OPENSSL_realloc
9556 Free => OPENSSL_free
9559 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
9560 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
9563 *) CygWin32 support.
9564 [John Jarvie <jjarvie@newsguy.com>]
9566 *) The type-safe stack code has been rejigged. It is now only compiled
9567 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
9568 by default all type-specific stack functions are "#define"d back to
9569 standard stack functions. This results in more streamlined output
9570 but retains the type-safety checking possibilities of the original
9574 *) The STACK code has been cleaned up, and certain type declarations
9575 that didn't make a lot of sense have been brought in line. This has
9576 also involved a cleanup of sorts in safestack.h to more correctly
9577 map type-safe stack functions onto their plain stack counterparts.
9578 This work has also resulted in a variety of "const"ifications of
9579 lots of the code, especially "_cmp" operations which should normally
9580 be prototyped with "const" parameters anyway.
9583 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
9584 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
9585 (The PRNG state consists of two parts, the large pool 'state' and 'md',
9586 where all of 'md' is used each time the PRNG is used, but 'state'
9587 is used only indexed by a cyclic counter. As entropy may not be
9588 well distributed from the beginning, 'md' is important as a
9589 chaining variable. However, the output function chains only half
9590 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
9591 all of 'md', and seeding with STATE_SIZE dummy bytes will result
9592 in all of 'state' being rewritten, with the new values depending
9593 on virtually all of 'md'. This overcomes the 80 bit limitation.)
9596 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
9597 the handshake is continued after ssl_verify_cert_chain();
9598 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
9599 can lead to 'unexplainable' connection aborts later.
9600 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
9602 *) Major EVP API cipher revision.
9603 Add hooks for extra EVP features. This allows various cipher
9604 parameters to be set in the EVP interface. Support added for variable
9605 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
9606 setting of RC2 and RC5 parameters.
9608 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
9611 Remove lots of duplicated code from the EVP library. For example *every*
9612 cipher init() function handles the 'iv' in the same way according to the
9613 cipher mode. They also all do nothing if the 'key' parameter is NULL and
9614 for CFB and OFB modes they zero ctx->num.
9616 New functionality allows removal of S/MIME code RC2 hack.
9618 Most of the routines have the same form and so can be declared in terms
9621 By shifting this to the top level EVP_CipherInit() it can be removed from
9622 all individual ciphers. If the cipher wants to handle IVs or keys
9623 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
9626 Change lots of functions like EVP_EncryptUpdate() to now return a
9627 value: although software versions of the algorithms cannot fail
9628 any installed hardware versions can.
9631 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
9632 this option is set, tolerate broken clients that send the negotiated
9633 protocol version number instead of the requested protocol version
9637 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
9638 i.e. non-zero for export ciphersuites, zero otherwise.
9639 Previous versions had this flag inverted, inconsistent with
9640 rsa_tmp_cb (..._TMP_RSA_CB).
9641 [Bodo Moeller; problem reported by Amit Chopra]
9643 *) Add missing DSA library text string. Work around for some IIS
9644 key files with invalid SEQUENCE encoding.
9647 *) Add a document (doc/standards.txt) that list all kinds of standards
9648 and so on that are implemented in OpenSSL.
9651 *) Enhance c_rehash script. Old version would mishandle certificates
9652 with the same subject name hash and wouldn't handle CRLs at all.
9653 Added -fingerprint option to crl utility, to support new c_rehash
9657 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
9660 *) Fix for SSL server purpose checking. Server checking was
9661 rejecting certificates which had extended key usage present
9662 but no ssl client purpose.
9663 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
9665 *) Make PKCS#12 code work with no password. The PKCS#12 spec
9666 is a little unclear about how a blank password is handled.
9667 Since the password in encoded as a BMPString with terminating
9668 double NULL a zero length password would end up as just the
9669 double NULL. However no password at all is different and is
9670 handled differently in the PKCS#12 key generation code. NS
9671 treats a blank password as zero length. MSIE treats it as no
9672 password on export: but it will try both on import. We now do
9673 the same: PKCS12_parse() tries zero length and no password if
9674 the password is set to "" or NULL (NULL is now a valid password:
9675 it wasn't before) as does the pkcs12 application.
9678 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
9679 perror when PEM_read_bio_X509_REQ fails, the error message must
9680 be obtained from the error queue.
9683 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
9684 it in ERR_remove_state if appropriate, and change ERR_get_state
9685 accordingly to avoid race conditions (this is necessary because
9686 thread_hash is no longer constant once set).
9689 *) Bugfix for linux-elf makefile.one.
9692 *) RSA_get_default_method() will now cause a default
9693 RSA_METHOD to be chosen if one doesn't exist already.
9694 Previously this was only set during a call to RSA_new()
9695 or RSA_new_method(NULL) meaning it was possible for
9696 RSA_get_default_method() to return NULL.
9699 *) Added native name translation to the existing DSO code
9700 that will convert (if the flag to do so is set) filenames
9701 that are sufficiently small and have no path information
9702 into a canonical native form. Eg. "blah" converted to
9703 "libblah.so" or "blah.dll" etc.
9706 *) New function ERR_error_string_n(e, buf, len) which is like
9707 ERR_error_string(e, buf), but writes at most 'len' bytes
9708 including the 0 terminator. For ERR_error_string_n, 'buf'
9710 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
9712 *) CONF library reworked to become more general. A new CONF
9713 configuration file reader "class" is implemented as well as a
9714 new functions (NCONF_*, for "New CONF") to handle it. The now
9715 old CONF_* functions are still there, but are reimplemented to
9716 work in terms of the new functions. Also, a set of functions
9717 to handle the internal storage of the configuration data is
9718 provided to make it easier to write new configuration file
9719 reader "classes" (I can definitely see something reading a
9720 configuration file in XML format, for example), called _CONF_*,
9721 or "the configuration storage API"...
9723 The new configuration file reading functions are:
9725 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
9726 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
9728 NCONF_default, NCONF_WIN32
9730 NCONF_dump_fp, NCONF_dump_bio
9732 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
9733 NCONF_new creates a new CONF object. This works in the same way
9734 as other interfaces in OpenSSL, like the BIO interface.
9735 NCONF_dump_* dump the internal storage of the configuration file,
9736 which is useful for debugging. All other functions take the same
9737 arguments as the old CONF_* functions wth the exception of the
9738 first that must be a `CONF *' instead of a `LHASH *'.
9740 To make it easer to use the new classes with the old CONF_* functions,
9741 the function CONF_set_default_method is provided.
9744 *) Add '-tls1' option to 'openssl ciphers', which was already
9745 mentioned in the documentation but had not been implemented.
9746 (This option is not yet really useful because even the additional
9747 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
9750 *) Initial DSO code added into libcrypto for letting OpenSSL (and
9751 OpenSSL-based applications) load shared libraries and bind to
9752 them in a portable way.
9753 [Geoff Thorpe, with contributions from Richard Levitte]
9755 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
9757 *) Make sure _lrotl and _lrotr are only used with MSVC.
9759 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
9760 (the default implementation of RAND_status).
9762 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
9763 to '-clrext' (= clear extensions), as intended and documented.
9764 [Bodo Moeller; inconsistency pointed out by Michael Attili
9767 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
9768 was larger than the MD block size.
9769 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
9771 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
9772 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
9773 using the passed key: if the passed key was a private key the result
9774 of X509_print(), for example, would be to print out all the private key
9778 *) des_quad_cksum() byte order bug fix.
9779 [Ulf Möller, using the problem description in krb4-0.9.7, where
9780 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
9782 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
9784 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
9786 *) For easily testing in shell scripts whether some command
9787 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
9788 returns with exit code 0 iff no command of the given name is available.
9789 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
9790 the output goes to stdout and nothing is printed to stderr.
9791 Additional arguments are always ignored.
9793 Since for each cipher there is a command of the same name,
9794 the 'no-cipher' compilation switches can be tested this way.
9796 ('openssl no-XXX' is not able to detect pseudo-commands such
9797 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
9800 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
9803 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
9804 is set; it will be thrown away anyway because each handshake creates
9806 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
9807 to parameters -- in previous versions (since OpenSSL 0.9.3) the
9808 'default key' from SSL_CTX_set_tmp_dh would always be lost, meaning
9809 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
9812 *) New s_client option -ign_eof: EOF at stdin is ignored, and
9813 'Q' and 'R' lose their special meanings (quit/renegotiate).
9814 This is part of what -quiet does; unlike -quiet, -ign_eof
9815 does not suppress any output.
9818 *) Add compatibility options to the purpose and trust code. The
9819 purpose X509_PURPOSE_ANY is "any purpose" which automatically
9820 accepts a certificate or CA, this was the previous behaviour,
9821 with all the associated security issues.
9823 X509_TRUST_COMPAT is the old trust behaviour: only and
9824 automatically trust self signed roots in certificate store. A
9825 new trust setting X509_TRUST_DEFAULT is used to specify that
9826 a purpose has no associated trust setting and it should instead
9827 use the value in the default purpose.
9830 *) Fix the PKCS#8 DSA private key code so it decodes keys again
9831 and fix a memory leak.
9834 *) In util/mkerr.pl (which implements 'make errors'), preserve
9835 reason strings from the previous version of the .c file, as
9836 the default to have only downcase letters (and digits) in
9837 automatically generated reasons codes is not always appropriate.
9840 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
9841 using strerror. Previously, ERR_reason_error_string() returned
9842 library names as reason strings for SYSerr; but SYSerr is a special
9843 case where small numbers are errno values, not library numbers.
9846 *) Add '-dsaparam' option to 'openssl dhparam' application. This
9847 converts DSA parameters into DH parameters. (When creating parameters,
9848 DSA_generate_parameters is used.)
9851 *) Include 'length' (recommended exponent length) in C code generated
9852 by 'openssl dhparam -C'.
9855 *) The second argument to set_label in perlasm was already being used
9856 so couldn't be used as a "file scope" flag. Moved to third argument
9860 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
9861 instead of RAND_bytes for encryption IVs and salts.
9864 *) Include RAND_status() into RAND_METHOD instead of implementing
9865 it only for md_rand.c Otherwise replacing the PRNG by calling
9866 RAND_set_rand_method would be impossible.
9869 *) Don't let DSA_generate_key() enter an infinite loop if the random
9870 number generation fails.
9873 *) New 'rand' application for creating pseudo-random output.
9876 *) Added configuration support for Linux/IA64
9877 [Rolf Haberrecker <rolf@suse.de>]
9879 *) Assembler module support for Mingw32.
9882 *) Shared library support for HPUX (in shlib/).
9883 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
9885 *) Shared library support for Solaris gcc.
9886 [Lutz Behnke <behnke@trustcenter.de>]
9888 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
9890 *) PKCS7_encrypt() was adding text MIME headers twice because they
9891 were added manually and by SMIME_crlf_copy().
9894 *) In bntest.c don't call BN_rand with zero bits argument.
9895 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
9897 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
9898 case was implemented. This caused BN_div_recp() to fail occasionally.
9901 *) Add an optional second argument to the set_label() in the perl
9902 assembly language builder. If this argument exists and is set
9903 to 1 it signals that the assembler should use a symbol whose
9904 scope is the entire file, not just the current function. This
9905 is needed with MASM which uses the format label:: for this scope.
9906 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
9908 *) Change the ASN1 types so they are typedefs by default. Before
9909 almost all types were #define'd to ASN1_STRING which was causing
9910 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
9914 *) Change names of new functions to the new get1/get0 naming
9915 convention: After 'get1', the caller owns a reference count
9916 and has to call ..._free; 'get0' returns a pointer to some
9917 data structure without incrementing reference counters.
9918 (Some of the existing 'get' functions increment a reference
9919 counter, some don't.)
9920 Similarly, 'set1' and 'add1' functions increase reference
9921 counters or duplicate objects.
9924 *) Allow for the possibility of temp RSA key generation failure:
9925 the code used to assume it always worked and crashed on failure.
9928 *) Fix potential buffer overrun problem in BIO_printf().
9929 [Ulf Möller, using public domain code by Patrick Powell; problem
9930 pointed out by David Sacerdote <das33@cornell.edu>]
9932 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
9933 RAND_egd() and RAND_status(). In the command line application,
9934 the EGD socket can be specified like a seed file using RANDFILE
9938 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
9939 Some CAs (e.g. Verisign) distribute certificates in this form.
9942 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
9943 list to exclude them. This means that no special compilation option
9944 is needed to use anonymous DH: it just needs to be included in the
9948 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
9949 EVP_MD_type. The old functionality is available in a new macro called
9950 EVP_MD_md(). Change code that uses it and update docs.
9953 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
9954 where the 'void *' argument is replaced by a function pointer argument.
9955 Previously 'void *' was abused to point to functions, which works on
9956 many platforms, but is not correct. As these functions are usually
9957 called by macros defined in OpenSSL header files, most source code
9958 should work without changes.
9961 *) <openssl/opensslconf.h> (which is created by Configure) now contains
9962 sections with information on -D... compiler switches used for
9963 compiling the library so that applications can see them. To enable
9964 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
9965 must be defined. E.g.,
9966 #define OPENSSL_ALGORITHM_DEFINES
9967 #include <openssl/opensslconf.h>
9968 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
9969 [Richard Levitte, Ulf and Bodo Möller]
9971 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
9975 *) Change the 'other' type in certificate aux info to a STACK_OF
9976 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
9977 the required ASN1 format: arbitrary types determined by an OID.
9980 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
9981 argument to 'req'. This is not because the function is newer or
9982 better than others it just uses the work 'NEW' in the certificate
9983 request header lines. Some software needs this.
9986 *) Reorganise password command line arguments: now passwords can be
9987 obtained from various sources. Delete the PEM_cb function and make
9988 it the default behaviour: i.e. if the callback is NULL and the
9989 usrdata argument is not NULL interpret it as a null terminated pass
9990 phrase. If usrdata and the callback are NULL then the pass phrase
9991 is prompted for as usual.
9994 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
9995 the support is automatically enabled. The resulting binaries will
9996 autodetect the card and use it if present.
9997 [Ben Laurie and Compaq Inc.]
9999 *) Work around for Netscape hang bug. This sends certificate request
10000 and server done in one record. Since this is perfectly legal in the
10001 SSL/TLS protocol it isn't a "bug" option and is on by default. See
10002 the bugs/SSLv3 entry for more info.
10005 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
10008 *) Add -rand argument to smime and pkcs12 applications and read/write
10012 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
10015 *) Add command line password options to the remaining applications.
10018 *) Bug fix for BN_div_recp() for numerators with an even number of
10022 *) More tests in bntest.c, and changed test_bn output.
10025 *) ./config recognizes MacOS X now.
10028 *) Bug fix for BN_div() when the first words of num and divsor are
10029 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
10032 *) Add support for various broken PKCS#8 formats, and command line
10033 options to produce them.
10036 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
10037 get temporary BIGNUMs from a BN_CTX.
10040 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
10044 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
10045 include a #define from the old name to the new. The original intent
10046 was that statically linked binaries could for example just call
10047 SSLeay_add_all_ciphers() to just add ciphers to the table and not
10048 link with digests. This never worked because SSLeay_add_all_digests()
10049 and SSLeay_add_all_ciphers() were in the same source file so calling
10050 one would link with the other. They are now in separate source files.
10053 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
10056 *) Use a less unusual form of the Miller-Rabin primality test (it used
10057 a binary algorithm for exponentiation integrated into the Miller-Rabin
10058 loop, our standard modexp algorithms are faster).
10061 *) Support for the EBCDIC character set completed.
10062 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
10064 *) Source code cleanups: use const where appropriate, eliminate casts,
10065 use void * instead of char * in lhash.
10068 *) Bugfix: ssl3_send_server_key_exchange was not restartable
10069 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
10070 this the server could overwrite ephemeral keys that the client
10074 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
10075 using 50 iterations of the Rabin-Miller test.
10077 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
10078 iterations of the Rabin-Miller test as required by the appendix
10079 to FIPS PUB 186[-1]) instead of DSA_is_prime.
10080 As BN_is_prime_fasttest includes trial division, DSA parameter
10081 generation becomes much faster.
10083 This implies a change for the callback functions in DSA_is_prime
10084 and DSA_generate_parameters: The callback function is called once
10085 for each positive witness in the Rabin-Miller test, not just
10086 occasionally in the inner loop; and the parameters to the
10087 callback function now provide an iteration count for the outer
10088 loop rather than for the current invocation of the inner loop.
10089 DSA_generate_parameters additionally can call the callback
10090 function with an 'iteration count' of -1, meaning that a
10091 candidate has passed the trial division test (when q is generated
10092 from an application-provided seed, trial division is skipped).
10095 *) New function BN_is_prime_fasttest that optionally does trial
10096 division before starting the Rabin-Miller test and has
10097 an additional BN_CTX * argument (whereas BN_is_prime always
10098 has to allocate at least one BN_CTX).
10099 'callback(1, -1, cb_arg)' is called when a number has passed the
10100 trial division stage.
10103 *) Fix for bug in CRL encoding. The validity dates weren't being handled
10107 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
10110 *) New function BN_pseudo_rand().
10113 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
10114 bignum version of BN_from_montgomery() with the working code from
10115 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
10119 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
10120 made it impossible to use the same SSL_SESSION data structure in
10121 SSL2 clients in multiple threads.
10124 *) The return value of RAND_load_file() no longer counts bytes obtained
10125 by stat(). RAND_load_file(..., -1) is new and uses the complete file
10126 to seed the PRNG (previously an explicit byte count was required).
10127 [Ulf Möller, Bodo Möller]
10129 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
10130 used (char *) instead of (void *) and had casts all over the place.
10133 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
10136 *) Retain source code compatibility for BN_prime_checks macro:
10137 BN_is_prime(..., BN_prime_checks, ...) now uses
10138 BN_prime_checks_for_size to determine the appropriate number of
10139 Rabin-Miller iterations.
10142 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
10143 DH_CHECK_P_NOT_SAFE_PRIME.
10144 (Check if this is true? OpenPGP calls them "strong".)
10147 *) Merge the functionality of "dh" and "gendh" programs into a new program
10148 "dhparam". The old programs are retained for now but will handle DH keys
10149 (instead of parameters) in future.
10152 *) Make the ciphers, s_server and s_client programs check the return values
10153 when a new cipher list is set.
10156 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
10157 ciphers. Before when the 56bit ciphers were enabled the sorting was
10160 The syntax for the cipher sorting has been extended to support sorting by
10161 cipher-strength (using the strength_bits hard coded in the tables).
10162 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
10164 Fix a bug in the cipher-command parser: when supplying a cipher command
10165 string with an "undefined" symbol (neither command nor alphanumeric
10166 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
10167 an error is flagged.
10169 Due to the strength-sorting extension, the code of the
10170 ssl_create_cipher_list() function was completely rearranged. I hope that
10171 the readability was also increased :-)
10172 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
10174 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
10175 for the first serial number and places 2 in the serial number file. This
10176 avoids problems when the root CA is created with serial number zero and
10177 the first user certificate has the same issuer name and serial number
10181 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
10182 the new code. Add documentation for this stuff.
10185 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
10186 X509_*() to X509at_*() on the grounds that they don't handle X509
10187 structures and behave in an analogous way to the X509v3 functions:
10188 they shouldn't be called directly but wrapper functions should be used
10191 So we also now have some wrapper functions that call the X509at functions
10192 when passed certificate requests. (TO DO: similar things can be done with
10193 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
10194 things. Some of these need some d2i or i2d and print functionality
10195 because they handle more complex structures.)
10198 *) Add missing #ifndefs that caused missing symbols when building libssl
10199 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
10200 NO_RSA in ssl/s2*.c.
10201 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
10203 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
10204 has a return value which indicates the quality of the random data
10205 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
10206 error queue. New function RAND_pseudo_bytes() generates output that is
10207 guaranteed to be unique but not unpredictable. RAND_add is like
10208 RAND_seed, but takes an extra argument for an entropy estimate
10209 (RAND_seed always assumes full entropy).
10212 *) Do more iterations of Rabin-Miller probable prime test (specifically,
10213 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
10214 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
10215 in crypto/bn/bn_prime.c for the complete table). This guarantees a
10216 false-positive rate of at most 2^-80 for random input.
10219 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
10222 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
10223 in the 0.9.5 release), this returns the chain
10224 from an X509_CTX structure with a dup of the stack and all
10225 the X509 reference counts upped: so the stack will exist
10226 after X509_CTX_cleanup() has been called. Modify pkcs12.c
10229 Also make SSL_SESSION_print() print out the verify return
10233 *) Add manpage for the pkcs12 command. Also change the default
10234 behaviour so MAC iteration counts are used unless the new
10235 -nomaciter option is used. This improves file security and
10236 only older versions of MSIE (4.0 for example) need it.
10239 *) Honor the no-xxx Configure options when creating .DEF files.
10242 *) Add PKCS#10 attributes to field table: challengePassword,
10243 unstructuredName and unstructuredAddress. These are taken from
10244 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
10245 international characters are used.
10247 More changes to X509_ATTRIBUTE code: allow the setting of types
10248 based on strings. Remove the 'loc' parameter when adding
10249 attributes because these will be a SET OF encoding which is sorted
10253 *) Initial changes to the 'req' utility to allow request generation
10254 automation. This will allow an application to just generate a template
10255 file containing all the field values and have req construct the
10258 Initial support for X509_ATTRIBUTE handling. Stacks of these are
10259 used all over the place including certificate requests and PKCS#7
10260 structures. They are currently handled manually where necessary with
10261 some primitive wrappers for PKCS#7. The new functions behave in a
10262 manner analogous to the X509 extension functions: they allow
10263 attributes to be looked up by NID and added.
10265 Later something similar to the X509V3 code would be desirable to
10266 automatically handle the encoding, decoding and printing of the
10267 more complex types. The string types like challengePassword can
10268 be handled by the string table functions.
10270 Also modified the multi byte string table handling. Now there is
10271 a 'global mask' which masks out certain types. The table itself
10272 can use the flag STABLE_NO_MASK to ignore the mask setting: this
10273 is useful when for example there is only one permissible type
10274 (as in countryName) and using the mask might result in no valid
10278 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
10279 SSL_get_peer_finished to allow applications to obtain the latest
10280 Finished messages sent to the peer or expected from the peer,
10281 respectively. (SSL_get_peer_finished is usually the Finished message
10282 actually received from the peer, otherwise the protocol will be aborted.)
10284 As the Finished message are message digests of the complete handshake
10285 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
10286 be used for external authentication procedures when the authentication
10287 provided by SSL/TLS is not desired or is not enough.
10290 *) Enhanced support for Alpha Linux is added. Now ./config checks if
10291 the host supports BWX extension and if Compaq C is present on the
10292 $PATH. Just exploiting of the BWX extension results in 20-30%
10293 performance kick for some algorithms, e.g. DES and RC4 to mention
10294 a couple. Compaq C in turn generates ~20% faster code for MD5 and
10298 *) Add support for MS "fast SGC". This is arguably a violation of the
10299 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
10300 weak crypto and after checking the certificate is SGC a second one
10301 with strong crypto. MS SGC stops the first handshake after receiving
10302 the server certificate message and sends a second client hello. Since
10303 a server will typically do all the time consuming operations before
10304 expecting any further messages from the client (server key exchange
10305 is the most expensive) there is little difference between the two.
10307 To get OpenSSL to support MS SGC we have to permit a second client
10308 hello message after we have sent server done. In addition we have to
10309 reset the MAC if we do get this second client hello.
10312 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
10313 if a DER encoded private key is RSA or DSA traditional format. Changed
10314 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
10315 format DER encoded private key. Newer code should use PKCS#8 format which
10316 has the key type encoded in the ASN1 structure. Added DER private key
10317 support to pkcs8 application.
10320 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
10321 ciphersuites has been selected (as required by the SSL 3/TLS 1
10322 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
10323 is set, we interpret this as a request to violate the specification
10324 (the worst that can happen is a handshake failure, and 'correct'
10325 behaviour would result in a handshake failure anyway).
10328 *) In SSL_CTX_add_session, take into account that there might be multiple
10329 SSL_SESSION structures with the same session ID (e.g. when two threads
10330 concurrently obtain them from an external cache).
10331 The internal cache can handle only one SSL_SESSION with a given ID,
10332 so if there's a conflict, we now throw out the old one to achieve
10336 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
10337 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
10338 some routines that use cipher OIDs: some ciphers do not have OIDs
10339 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
10343 *) Simplify the trust setting structure and code. Now we just have
10344 two sequences of OIDs for trusted and rejected settings. These will
10345 typically have values the same as the extended key usage extension
10346 and any application specific purposes.
10348 The trust checking code now has a default behaviour: it will just
10349 check for an object with the same NID as the passed id. Functions can
10350 be provided to override either the default behaviour or the behaviour
10351 for a given id. SSL client, server and email already have functions
10352 in place for compatibility: they check the NID and also return "trusted"
10353 if the certificate is self signed.
10356 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
10357 traditional format into an EVP_PKEY structure.
10360 *) Add a password callback function PEM_cb() which either prompts for
10361 a password if usr_data is NULL or otherwise assumes it is a null
10362 terminated password. Allow passwords to be passed on command line
10363 environment or config files in a few more utilities.
10366 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
10367 keys. Add some short names for PKCS#8 PBE algorithms and allow them
10368 to be specified on the command line for the pkcs8 and pkcs12 utilities.
10369 Update documentation.
10372 *) Support for ASN1 "NULL" type. This could be handled before by using
10373 ASN1_TYPE but there wasn't any function that would try to read a NULL
10374 and produce an error if it couldn't. For compatibility we also have
10375 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
10376 don't allocate anything because they don't need to.
10379 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
10381 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
10383 *) Rebuild of the memory allocation routines used by OpenSSL code and
10384 possibly others as well. The purpose is to make an interface that
10385 provide hooks so anyone can build a separate set of allocation and
10386 deallocation routines to be used by OpenSSL, for example memory
10387 pool implementations, or something else, which was previously hard
10388 since Malloc(), Realloc() and Free() were defined as macros having
10389 the values malloc, realloc and free, respectively (except for Win32
10390 compilations). The same is provided for memory debugging code.
10391 OpenSSL already comes with functionality to find memory leaks, but
10392 this gives people a chance to debug other memory problems.
10394 With these changes, a new set of functions and macros have appeared:
10396 CRYPTO_set_mem_debug_functions() [F]
10397 CRYPTO_get_mem_debug_functions() [F]
10398 CRYPTO_dbg_set_options() [F]
10399 CRYPTO_dbg_get_options() [F]
10400 CRYPTO_malloc_debug_init() [M]
10402 The memory debug functions are NULL by default, unless the library
10403 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
10404 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
10405 gives the standard debugging functions that come with OpenSSL) or
10406 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
10407 provided by the library user) must be used. When the standard
10408 debugging functions are used, CRYPTO_dbg_set_options can be used to
10409 request additional information:
10410 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
10411 the CRYPTO_MDEBUG_xxx macro when compiling the library.
10413 Also, things like CRYPTO_set_mem_functions will always give the
10414 expected result (the new set of functions is used for allocation
10415 and deallocation) at all times, regardless of platform and compiler
10418 To finish it up, some functions that were never use in any other
10419 way than through macros have a new API and new semantic:
10421 CRYPTO_dbg_malloc()
10422 CRYPTO_dbg_realloc()
10425 All macros of value have retained their old syntax.
10426 [Richard Levitte and Bodo Moeller]
10428 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
10429 ordering of SMIMECapabilities wasn't in "strength order" and there
10430 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
10434 *) Some ASN1 types with illegal zero length encoding (INTEGER,
10435 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
10436 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
10438 *) Merge in my S/MIME library for OpenSSL. This provides a simple
10439 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
10440 functionality to handle multipart/signed properly) and a utility
10441 called 'smime' to call all this stuff. This is based on code I
10442 originally wrote for Celo who have kindly allowed it to be
10443 included in OpenSSL.
10446 *) Add variants des_set_key_checked and des_set_key_unchecked of
10447 des_set_key (aka des_key_sched). Global variable des_check_key
10448 decides which of these is called by des_set_key; this way
10449 des_check_key behaves as it always did, but applications and
10450 the library itself, which was buggy for des_check_key == 1,
10451 have a cleaner way to pick the version they need.
10454 *) New function PKCS12_newpass() which changes the password of a
10458 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
10459 dynamic mix. In both cases the ids can be used as an index into the
10460 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
10461 functions so they accept a list of the field values and the
10462 application doesn't need to directly manipulate the X509_TRUST
10466 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
10470 *) Modify the way the V3 extension code looks up extensions. This now
10471 works in a similar way to the object code: we have some "standard"
10472 extensions in a static table which is searched with OBJ_bsearch()
10473 and the application can add dynamic ones if needed. The file
10474 crypto/x509v3/ext_dat.h now has the info: this file needs to be
10475 updated whenever a new extension is added to the core code and kept
10476 in ext_nid order. There is a simple program 'tabtest.c' which checks
10477 this. New extensions are not added too often so this file can readily
10478 be maintained manually.
10480 There are two big advantages in doing things this way. The extensions
10481 can be looked up immediately and no longer need to be "added" using
10482 X509V3_add_standard_extensions(): this function now does nothing.
10483 [Side note: I get *lots* of email saying the extension code doesn't
10484 work because people forget to call this function]
10485 Also no dynamic allocation is done unless new extensions are added:
10486 so if we don't add custom extensions there is no need to call
10487 X509V3_EXT_cleanup().
10490 *) Modify enc utility's salting as follows: make salting the default. Add a
10491 magic header, so unsalted files fail gracefully instead of just decrypting
10492 to garbage. This is because not salting is a big security hole, so people
10493 should be discouraged from doing it.
10496 *) Fixes and enhancements to the 'x509' utility. It allowed a message
10497 digest to be passed on the command line but it only used this
10498 parameter when signing a certificate. Modified so all relevant
10499 operations are affected by the digest parameter including the
10500 -fingerprint and -x509toreq options. Also -x509toreq choked if a
10501 DSA key was used because it didn't fix the digest.
10504 *) Initial certificate chain verify code. Currently tests the untrusted
10505 certificates for consistency with the verify purpose (which is set
10506 when the X509_STORE_CTX structure is set up) and checks the pathlength.
10508 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
10509 this is because it will reject chains with invalid extensions whereas
10510 every previous version of OpenSSL and SSLeay made no checks at all.
10512 Trust code: checks the root CA for the relevant trust settings. Trust
10513 settings have an initial value consistent with the verify purpose: e.g.
10514 if the verify purpose is for SSL client use it expects the CA to be
10515 trusted for SSL client use. However the default value can be changed to
10516 permit custom trust settings: one example of this would be to only trust
10517 certificates from a specific "secure" set of CAs.
10519 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
10520 which should be used for version portability: especially since the
10521 verify structure is likely to change more often now.
10523 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
10524 to set them. If not set then assume SSL clients will verify SSL servers
10527 Two new options to the verify program: -untrusted allows a set of
10528 untrusted certificates to be passed in and -purpose which sets the
10529 intended purpose of the certificate. If a purpose is set then the
10530 new chain verify code is used to check extension consistency.
10533 *) Support for the authority information access extension.
10536 *) Modify RSA and DSA PEM read routines to transparently handle
10537 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
10538 public keys in a format compatible with certificate
10539 SubjectPublicKeyInfo structures. Unfortunately there were already
10540 functions called *_PublicKey_* which used various odd formats so
10541 these are retained for compatibility: however the DSA variants were
10542 never in a public release so they have been deleted. Changed dsa/rsa
10543 utilities to handle the new format: note no releases ever handled public
10544 keys so we should be OK.
10546 The primary motivation for this change is to avoid the same fiasco
10547 that dogs private keys: there are several incompatible private key
10548 formats some of which are standard and some OpenSSL specific and
10549 require various evil hacks to allow partial transparent handling and
10550 even then it doesn't work with DER formats. Given the option anything
10551 other than PKCS#8 should be dumped: but the other formats have to
10552 stay in the name of compatibility.
10554 With public keys and the benefit of hindsight one standard format
10555 is used which works with EVP_PKEY, RSA or DSA structures: though
10556 it clearly returns an error if you try to read the wrong kind of key.
10558 Added a -pubkey option to the 'x509' utility to output the public key.
10559 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
10560 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
10561 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
10562 that do the same as the EVP_PKEY_assign_*() except they up the
10563 reference count of the added key (they don't "swallow" the
10567 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
10568 CRLs would fail if the file contained no certificates or no CRLs:
10569 added a new function to read in both types and return the number
10570 read: this means that if none are read it will be an error. The
10571 DER versions of the certificate and CRL reader would always fail
10572 because it isn't possible to mix certificates and CRLs in DER format
10573 without choking one or the other routine. Changed this to just read
10574 a certificate: this is the best we can do. Also modified the code
10575 in apps/verify.c to take notice of return codes: it was previously
10576 attempting to read in certificates from NULL pointers and ignoring
10577 any errors: this is one reason why the cert and CRL reader seemed
10578 to work. It doesn't check return codes from the default certificate
10579 routines: these may well fail if the certificates aren't installed.
10582 *) Code to support otherName option in GeneralName.
10585 *) First update to verify code. Change the verify utility
10586 so it warns if it is passed a self signed certificate:
10587 for consistency with the normal behaviour. X509_verify
10588 has been modified to it will now verify a self signed
10589 certificate if *exactly* the same certificate appears
10590 in the store: it was previously impossible to trust a
10591 single self signed certificate. This means that:
10592 openssl verify ss.pem
10593 now gives a warning about a self signed certificate but
10594 openssl verify -CAfile ss.pem ss.pem
10598 *) For servers, store verify_result in SSL_SESSION data structure
10599 (and add it to external session representation).
10600 This is needed when client certificate verifications fails,
10601 but an application-provided verification callback (set by
10602 SSL_CTX_set_cert_verify_callback) allows accepting the session
10603 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
10604 but returns 1): When the session is reused, we have to set
10605 ssl->verify_result to the appropriate error code to avoid
10607 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
10609 *) Fix a bug in the new PKCS#7 code: it didn't consider the
10610 case in PKCS7_dataInit() where the signed PKCS7 structure
10611 didn't contain any existing data because it was being created.
10612 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
10614 *) Add a salt to the key derivation routines in enc.c. This
10615 forms the first 8 bytes of the encrypted file. Also add a
10616 -S option to allow a salt to be input on the command line.
10619 *) New function X509_cmp(). Oddly enough there wasn't a function
10620 to compare two certificates. We do this by working out the SHA1
10621 hash and comparing that. X509_cmp() will be needed by the trust
10625 *) SSL_get1_session() is like SSL_get_session(), but increments
10626 the reference count in the SSL_SESSION returned.
10627 [Geoff Thorpe <geoff@eu.c2.net>]
10629 *) Fix for 'req': it was adding a null to request attributes.
10630 Also change the X509_LOOKUP and X509_INFO code to handle
10631 certificate auxiliary information.
10634 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
10638 *) Add the possibility to add extra information to the memory leak
10639 detecting output, to form tracebacks, showing from where each
10640 allocation was originated: CRYPTO_push_info("constant string") adds
10641 the string plus current file name and line number to a per-thread
10642 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
10643 is like calling CYRPTO_pop_info() until the stack is empty.
10644 Also updated memory leak detection code to be multi-thread-safe.
10647 *) Add options -text and -noout to pkcs7 utility and delete the
10648 encryption options which never did anything. Update docs.
10651 *) Add options to some of the utilities to allow the pass phrase
10652 to be included on either the command line (not recommended on
10653 OSes like Unix) or read from the environment. Update the
10654 manpages and fix a few bugs.
10657 *) Add a few manpages for some of the openssl commands.
10660 *) Fix the -revoke option in ca. It was freeing up memory twice,
10661 leaking and not finding already revoked certificates.
10664 *) Extensive changes to support certificate auxiliary information.
10665 This involves the use of X509_CERT_AUX structure and X509_AUX
10666 functions. An X509_AUX function such as PEM_read_X509_AUX()
10667 can still read in a certificate file in the usual way but it
10668 will also read in any additional "auxiliary information". By
10669 doing things this way a fair degree of compatibility can be
10670 retained: existing certificates can have this information added
10671 using the new 'x509' options.
10673 Current auxiliary information includes an "alias" and some trust
10674 settings. The trust settings will ultimately be used in enhanced
10675 certificate chain verification routines: currently a certificate
10676 can only be trusted if it is self signed and then it is trusted
10680 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
10681 The problem was that one of the replacement routines had not been working
10682 since SSLeay releases. For now the offending routine has been replaced
10683 with non-optimised assembler. Even so, this now gives around 95%
10684 performance improvement for 1024 bit RSA signs.
10687 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
10688 handling. Most clients have the effective key size in bits equal to
10689 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
10690 A few however don't do this and instead use the size of the decrypted key
10691 to determine the RC2 key length and the AlgorithmIdentifier to determine
10692 the effective key length. In this case the effective key length can still
10693 be 40 bits but the key length can be 168 bits for example. This is fixed
10694 by manually forcing an RC2 key into the EVP_PKEY structure because the
10695 EVP code can't currently handle unusual RC2 key sizes: it always assumes
10696 the key length and effective key length are equal.
10699 *) Add a bunch of functions that should simplify the creation of
10700 X509_NAME structures. Now you should be able to do:
10701 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
10702 and have it automatically work out the correct field type and fill in
10703 the structures. The more adventurous can try:
10704 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
10705 and it will (hopefully) work out the correct multibyte encoding.
10708 *) Change the 'req' utility to use the new field handling and multibyte
10709 copy routines. Before the DN field creation was handled in an ad hoc
10710 way in req, ca, and x509 which was rather broken and didn't support
10711 BMPStrings or UTF8Strings. Since some software doesn't implement
10712 BMPStrings or UTF8Strings yet, they can be enabled using the config file
10713 using the dirstring_type option. See the new comment in the default
10714 openssl.cnf for more info.
10717 *) Make crypto/rand/md_rand.c more robust:
10718 - Assure unique random numbers after fork().
10719 - Make sure that concurrent threads access the global counter and
10720 md serializably so that we never lose entropy in them
10721 or use exactly the same state in multiple threads.
10722 Access to the large state is not always serializable because
10723 the additional locking could be a performance killer, and
10724 md should be large enough anyway.
10727 *) New file apps/app_rand.c with commonly needed functionality
10728 for handling the random seed file.
10730 Use the random seed file in some applications that previously did not:
10732 dsaparam -genkey (which also ignored its '-rand' option),
10735 x509 (when signing).
10736 Except on systems with /dev/urandom, it is crucial to have a random
10737 seed file at least for key creation, DSA signing, and for DH exchanges;
10738 for RSA signatures we could do without one.
10740 gendh and gendsa (unlike genrsa) used to read only the first byte
10741 of each file listed in the '-rand' option. The function as previously
10742 found in genrsa is now in app_rand.c and is used by all programs
10743 that support '-rand'.
10746 *) In RAND_write_file, use mode 0600 for creating files;
10747 don't just chmod when it may be too late.
10750 *) Report an error from X509_STORE_load_locations
10751 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
10754 *) New function ASN1_mbstring_copy() this copies a string in either
10755 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
10756 into an ASN1_STRING type. A mask of permissible types is passed
10757 and it chooses the "minimal" type to use or an error if not type
10761 *) Add function equivalents to the various macros in asn1.h. The old
10762 macros are retained with an M_ prefix. Code inside the library can
10763 use the M_ macros. External code (including the openssl utility)
10764 should *NOT* in order to be "shared library friendly".
10767 *) Add various functions that can check a certificate's extensions
10768 to see if it usable for various purposes such as SSL client,
10769 server or S/MIME and CAs of these types. This is currently
10770 VERY EXPERIMENTAL but will ultimately be used for certificate chain
10771 verification. Also added a -purpose flag to x509 utility to
10772 print out all the purposes.
10775 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
10779 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
10780 for, obtain and decode and extension and obtain its critical flag.
10781 This allows all the necessary extension code to be handled in a
10782 single function call.
10785 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
10786 platforms. See crypto/rc4/rc4_enc.c for further details.
10789 *) New -noout option to asn1parse. This causes no output to be produced
10790 its main use is when combined with -strparse and -out to extract data
10791 from a file (which may not be in ASN.1 format).
10794 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
10795 when producing the local key id.
10796 [Richard Levitte <levitte@stacken.kth.se>]
10798 *) New option -dhparam in s_server. This allows a DH parameter file to be
10799 stated explicitly. If it is not stated then it tries the first server
10800 certificate file. The previous behaviour hard coded the filename
10804 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
10805 a public key to be input or output. For example:
10806 openssl rsa -in key.pem -pubout -out pubkey.pem
10807 Also added necessary DSA public key functions to handle this.
10810 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
10811 in the message. This was handled by allowing
10812 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
10813 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
10815 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
10816 to the end of the strings whereas this didn't. This would cause problems
10817 if strings read with d2i_ASN1_bytes() were later modified.
10818 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
10820 *) Fix for base64 decode bug. When a base64 bio reads only one line of
10821 data and it contains EOF it will end up returning an error. This is
10822 caused by input 46 bytes long. The cause is due to the way base64
10823 BIOs find the start of base64 encoded data. They do this by trying a
10824 trial decode on each line until they find one that works. When they
10825 do a flag is set and it starts again knowing it can pass all the
10826 data directly through the decoder. Unfortunately it doesn't reset
10827 the context it uses. This means that if EOF is reached an attempt
10828 is made to pass two EOFs through the context and this causes the
10829 resulting error. This can also cause other problems as well. As is
10830 usual with these problems it takes *ages* to find and the fix is
10831 trivial: move one line.
10832 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
10834 *) Ugly workaround to get s_client and s_server working under Windows. The
10835 old code wouldn't work because it needed to select() on sockets and the
10836 tty (for keypresses and to see if data could be written). Win32 only
10837 supports select() on sockets so we select() with a 1s timeout on the
10838 sockets and then see if any characters are waiting to be read, if none
10839 are present then we retry, we also assume we can always write data to
10840 the tty. This isn't nice because the code then blocks until we've
10841 received a complete line of data and it is effectively polling the
10842 keyboard at 1s intervals: however it's quite a bit better than not
10843 working at all :-) A dedicated Windows application might handle this
10844 with an event loop for example.
10847 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
10848 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
10849 will be called when RSA_sign() and RSA_verify() are used. This is useful
10850 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
10851 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
10852 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
10853 This necessitated the support of an extra signature type NID_md5_sha1
10854 for SSL signatures and modifications to the SSL library to use it instead
10855 of calling RSA_public_decrypt() and RSA_private_encrypt().
10858 *) Add new -verify -CAfile and -CApath options to the crl program, these
10859 will lookup a CRL issuers certificate and verify the signature in a
10860 similar way to the verify program. Tidy up the crl program so it
10861 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
10862 less strict. It will now permit CRL extensions even if it is not
10863 a V2 CRL: this will allow it to tolerate some broken CRLs.
10866 *) Initialize all non-automatic variables each time one of the openssl
10867 sub-programs is started (this is necessary as they may be started
10868 multiple times from the "OpenSSL>" prompt).
10869 [Lennart Bang, Bodo Moeller]
10871 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
10872 removing all other RSA functionality (this is what NO_RSA does). This
10873 is so (for example) those in the US can disable those operations covered
10874 by the RSA patent while allowing storage and parsing of RSA keys and RSA
10878 *) Non-copying interface to BIO pairs.
10879 (still largely untested)
10882 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
10883 ASCII string. This was handled independently in various places before.
10886 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
10887 UTF8 strings a character at a time.
10890 *) Use client_version from client hello to select the protocol
10891 (s23_srvr.c) and for RSA client key exchange verification
10892 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
10895 *) Add various utility functions to handle SPKACs, these were previously
10896 handled by poking round in the structure internals. Added new function
10897 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
10898 print, verify and generate SPKACs. Based on an original idea from
10899 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
10902 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
10905 *) Allow the config file extension section to be overwritten on the
10906 command line. Based on an original idea from Massimiliano Pala
10907 <madwolf@comune.modena.it>. The new option is called -extensions
10908 and can be applied to ca, req and x509. Also -reqexts to override
10909 the request extensions in req and -crlexts to override the crl extensions
10913 *) Add new feature to the SPKAC handling in ca. Now you can include
10914 the same field multiple times by preceding it by "XXXX." for example:
10917 this is the same syntax as used in the req config file.
10920 *) Allow certificate extensions to be added to certificate requests. These
10921 are specified in a 'req_extensions' option of the req section of the
10922 config file. They can be printed out with the -text option to req but
10923 are otherwise ignored at present.
10926 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
10927 data read consists of only the final block it would not decrypted because
10928 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
10929 A misplaced 'break' also meant the decrypted final block might not be
10930 copied until the next read.
10933 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
10934 a few extra parameters to the DH structure: these will be useful if
10935 for example we want the value of 'q' or implement X9.42 DH.
10938 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
10939 provides hooks that allow the default DSA functions or functions on a
10940 "per key" basis to be replaced. This allows hardware acceleration and
10941 hardware key storage to be handled without major modification to the
10942 library. Also added low level modexp hooks and CRYPTO_EX structure and
10943 associated functions.
10946 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
10947 as "read only": it can't be written to and the buffer it points to will
10948 not be freed. Reading from a read only BIO is much more efficient than
10949 a normal memory BIO. This was added because there are several times when
10950 an area of memory needs to be read from a BIO. The previous method was
10951 to create a memory BIO and write the data to it, this results in two
10952 copies of the data and an O(n^2) reading algorithm. There is a new
10953 function BIO_new_mem_buf() which creates a read only memory BIO from
10954 an area of memory. Also modified the PKCS#7 routines to use read only
10958 *) Bugfix: ssl23_get_client_hello did not work properly when called in
10959 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
10960 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
10961 but a retry condition occurred while trying to read the rest.
10964 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
10965 NID_pkcs7_encrypted by default: this was wrong since this should almost
10966 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
10967 the encrypted data type: this is a more sensible place to put it and it
10968 allows the PKCS#12 code to be tidied up that duplicated this
10972 *) Changed obj_dat.pl script so it takes its input and output files on
10973 the command line. This should avoid shell escape redirection problems
10977 *) Initial support for certificate extension requests, these are included
10978 in things like Xenroll certificate requests. Included functions to allow
10979 extensions to be obtained and added.
10982 *) -crlf option to s_client and s_server for sending newlines as
10983 CRLF (as required by many protocols).
10986 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
10988 *) Install libRSAglue.a when OpenSSL is built with RSAref.
10989 [Ralf S. Engelschall]
10991 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
10992 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
10994 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
10998 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
10999 DH parameters/keys (q is lost during that conversion, but the resulting
11000 DH parameters contain its length).
11002 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
11003 much faster than DH_generate_parameters (which creates parameters
11004 where p = 2*q + 1), and also the smaller q makes DH computations
11005 much more efficient (160-bit exponentiation instead of 1024-bit
11006 exponentiation); so this provides a convenient way to support DHE
11007 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
11008 utter importance to use
11009 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
11011 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
11012 when such DH parameters are used, because otherwise small subgroup
11013 attacks may become possible!
11016 *) Avoid memory leak in i2d_DHparams.
11019 *) Allow the -k option to be used more than once in the enc program:
11020 this allows the same encrypted message to be read by multiple recipients.
11023 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
11024 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
11025 it will always use the numerical form of the OID, even if it has a short
11029 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
11030 method only got called if p,q,dmp1,dmq1,iqmp components were present,
11031 otherwise bn_mod_exp was called. In the case of hardware keys for example
11032 no private key components need be present and it might store extra data
11033 in the RSA structure, which cannot be accessed from bn_mod_exp.
11034 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
11035 private key operations.
11038 *) Added support for SPARC Linux.
11041 *) pem_password_cb function type incompatibly changed from
11042 typedef int pem_password_cb(char *buf, int size, int rwflag);
11044 ....(char *buf, int size, int rwflag, void *userdata);
11045 so that applications can pass data to their callbacks:
11046 The PEM[_ASN1]_{read,write}... functions and macros now take an
11047 additional void * argument, which is just handed through whenever
11048 the password callback is called.
11049 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
11051 New function SSL_CTX_set_default_passwd_cb_userdata.
11053 Compatibility note: As many C implementations push function arguments
11054 onto the stack in reverse order, the new library version is likely to
11055 interoperate with programs that have been compiled with the old
11056 pem_password_cb definition (PEM_whatever takes some data that
11057 happens to be on the stack as its last argument, and the callback
11058 just ignores this garbage); but there is no guarantee whatsoever that
11061 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
11062 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
11063 problems not only on Windows, but also on some Unix platforms.
11064 To avoid problematic command lines, these definitions are now in an
11065 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
11066 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
11069 *) MIPS III/IV assembler module is reimplemented.
11072 *) More DES library cleanups: remove references to srand/rand and
11073 delete an unused file.
11076 *) Add support for the the free Netwide assembler (NASM) under Win32,
11077 since not many people have MASM (ml) and it can be hard to obtain.
11078 This is currently experimental but it seems to work OK and pass all
11079 the tests. Check out INSTALL.W32 for info.
11082 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
11083 without temporary keys kept an extra copy of the server key,
11084 and connections with temporary keys did not free everything in case
11088 *) New function RSA_check_key and new openssl rsa option -check
11089 for verifying the consistency of RSA keys.
11090 [Ulf Moeller, Bodo Moeller]
11092 *) Various changes to make Win32 compile work:
11093 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
11094 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
11095 comparison" warnings.
11096 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
11099 *) Add a debugging option to PKCS#5 v2 key generation function: when
11100 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
11101 derived keys are printed to stderr.
11104 *) Copy the flags in ASN1_STRING_dup().
11105 [Roman E. Pavlov <pre@mo.msk.ru>]
11107 *) The x509 application mishandled signing requests containing DSA
11108 keys when the signing key was also DSA and the parameters didn't match.
11110 It was supposed to omit the parameters when they matched the signing key:
11111 the verifying software was then supposed to automatically use the CA's
11112 parameters if they were absent from the end user certificate.
11114 Omitting parameters is no longer recommended. The test was also
11115 the wrong way round! This was probably due to unusual behaviour in
11116 EVP_cmp_parameters() which returns 1 if the parameters match.
11117 This meant that parameters were omitted when they *didn't* match and
11118 the certificate was useless. Certificates signed with 'ca' didn't have
11120 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
11122 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
11123 The interface is as follows:
11124 Applications can use
11125 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
11126 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
11127 "off" is now the default.
11128 The library internally uses
11129 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
11130 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
11131 to disable memory-checking temporarily.
11133 Some inconsistent states that previously were possible (and were
11134 even the default) are now avoided.
11136 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
11137 with each memory chunk allocated; this is occasionally more helpful
11138 than just having a counter.
11140 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
11142 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
11146 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
11147 which largely parallels "options", but is for changing API behaviour,
11148 whereas "options" are about protocol behaviour.
11149 Initial "mode" flags are:
11151 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
11152 a single record has been written.
11153 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
11154 retries use the same buffer location.
11155 (But all of the contents must be
11159 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
11162 *) Fix problems with no-hmac etc.
11163 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
11165 *) New functions RSA_get_default_method(), RSA_set_method() and
11166 RSA_get_method(). These allows replacement of RSA_METHODs without having
11167 to mess around with the internals of an RSA structure.
11170 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
11171 Also really enable memory leak checks in openssl.c and in some
11173 [Chad C. Mulligan, Bodo Moeller]
11175 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
11176 up the length of negative integers. This has now been simplified to just
11177 store the length when it is first determined and use it later, rather
11178 than trying to keep track of where data is copied and updating it to
11180 [Steve Henson, reported by Brien Wheeler
11181 <bwheeler@authentica-security.com>]
11183 *) Add a new function PKCS7_signatureVerify. This allows the verification
11184 of a PKCS#7 signature but with the signing certificate passed to the
11185 function itself. This contrasts with PKCS7_dataVerify which assumes the
11186 certificate is present in the PKCS#7 structure. This isn't always the
11187 case: certificates can be omitted from a PKCS#7 structure and be
11188 distributed by "out of band" means (such as a certificate database).
11191 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
11192 function prototypes in pem.h, also change util/mkdef.pl to add the
11193 necessary function names.
11196 *) mk1mf.pl (used by Windows builds) did not properly read the
11197 options set by Configure in the top level Makefile, and Configure
11198 was not even able to write more than one option correctly.
11199 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
11202 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
11203 file to be loaded from a BIO or FILE pointer. The BIO version will
11204 for example allow memory BIOs to contain config info.
11207 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
11208 Whoever hopes to achieve shared-library compatibility across versions
11209 must use this, not the compile-time macro.
11210 (Exercise 0.9.4: Which is the minimum library version required by
11212 Note: All this applies only to multi-threaded programs, others don't
11216 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
11217 through a BIO pair triggered the default case, i.e.
11218 SSLerr(...,SSL_R_UNKNOWN_STATE).
11221 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
11222 can use the SSL library even if none of the specific BIOs is
11226 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
11227 for the encoded length.
11228 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
11230 *) Add initial documentation of the X509V3 functions.
11233 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
11234 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
11235 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
11236 secure PKCS#8 private key format with a high iteration count.
11239 *) Fix determination of Perl interpreter: A perl or perl5
11240 _directory_ in $PATH was also accepted as the interpreter.
11241 [Ralf S. Engelschall]
11243 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
11244 wrong with it but it was very old and did things like calling
11245 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
11246 unusual formatting.
11249 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
11250 to use the new extension code.
11253 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
11254 with macros. This should make it easier to change their form, add extra
11255 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
11259 *) Add to configuration table a new entry that can specify an alternative
11260 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
11261 according to Mark Crispin <MRC@Panda.COM>.
11265 *) DES CBC did not update the IV. Weird.
11268 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
11269 Changing the behaviour of the former might break existing programs --
11270 where IV updating is needed, des_ncbc_encrypt can be used.
11273 *) When bntest is run from "make test" it drives bc to check its
11274 calculations, as well as internally checking them. If an internal check
11275 fails, it needs to cause bc to give a non-zero result or make test carries
11276 on without noticing the failure. Fixed.
11279 *) DES library cleanups.
11282 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
11283 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
11284 ciphers. NOTE: although the key derivation function has been verified
11285 against some published test vectors it has not been extensively tested
11286 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
11290 *) Instead of "mkdir -p", which is not fully portable, use new
11291 Perl script "util/mkdir-p.pl".
11294 *) Rewrite the way password based encryption (PBE) is handled. It used to
11295 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
11296 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
11297 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
11298 the 'parameter' field of the AlgorithmIdentifier is passed to the
11299 underlying key generation function so it must do its own ASN1 parsing.
11300 This has also changed the EVP_PBE_CipherInit() function which now has a
11301 'parameter' argument instead of literal salt and iteration count values
11302 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
11305 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
11306 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
11307 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
11308 KEY" because this clashed with PKCS#8 unencrypted string. Since this
11309 value was just used as a "magic string" and not used directly its
11310 value doesn't matter.
11313 *) Introduce some semblance of const correctness to BN. Shame C doesn't
11317 *) "linux-sparc64" configuration (ultrapenguin).
11318 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
11319 "linux-sparc" configuration.
11320 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
11322 *) config now generates no-xxx options for missing ciphers.
11325 *) Support the EBCDIC character set (work in progress).
11326 File ebcdic.c not yet included because it has a different license.
11327 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
11329 *) Support BS2000/OSD-POSIX.
11330 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
11332 *) Make callbacks for key generation use void * instead of char *.
11335 *) Make S/MIME samples compile (not yet tested).
11338 *) Additional typesafe stacks.
11341 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
11345 Changes between 0.9.3 and 0.9.3a [29 May 1999]
11347 *) New configuration variant "sco5-gcc".
11349 *) Updated some demos.
11350 [Sean O Riordain, Wade Scholine]
11352 *) Add missing BIO_free at exit of pkcs12 application.
11355 *) Fix memory leak in conf.c.
11358 *) Updates for Win32 to assembler version of MD5.
11361 *) Set #! path to perl in apps/der_chop to where we found it
11362 instead of using a fixed path.
11365 *) SHA library changes for irix64-mips4-cc.
11368 *) Improvements for VMS support.
11372 Changes between 0.9.2b and 0.9.3 [24 May 1999]
11374 *) Bignum library bug fix. IRIX 6 passes "make test" now!
11375 This also avoids the problems with SC4.2 and unpatched SC5.
11376 [Andy Polyakov <appro@fy.chalmers.se>]
11378 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
11379 These are required because of the typesafe stack would otherwise break
11380 existing code. If old code used a structure member which used to be STACK
11381 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
11382 sk_num or sk_value it would produce an error because the num, data members
11383 are not present in STACK_OF. Now it just produces a warning. sk_set
11384 replaces the old method of assigning a value to sk_value
11385 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
11386 that does this will no longer work (and should use sk_set instead) but
11387 this could be regarded as a "questionable" behaviour anyway.
11390 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
11391 correctly handle encrypted S/MIME data.
11394 *) Change type of various DES function arguments from des_cblock
11395 (which means, in function argument declarations, pointer to char)
11396 to des_cblock * (meaning pointer to array with 8 char elements),
11397 which allows the compiler to do more typechecking; it was like
11398 that back in SSLeay, but with lots of ugly casts.
11400 Introduce new type const_des_cblock.
11403 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
11404 problems: find RecipientInfo structure that matches recipient certificate
11405 and initialise the ASN1 structures properly based on passed cipher.
11408 *) Belatedly make the BN tests actually check the results.
11411 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
11412 to and from BNs: it was completely broken. New compilation option
11413 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
11414 key elements as negative integers.
11417 *) Reorganize and speed up MD5.
11418 [Andy Polyakov <appro@fy.chalmers.se>]
11421 [Richard Levitte <richard@levitte.org>]
11423 *) New option -out to asn1parse to allow the parsed structure to be
11424 output to a file. This is most useful when combined with the -strparse
11425 option to examine the output of things like OCTET STRINGS.
11428 *) Make SSL library a little more fool-proof by not requiring any longer
11429 that SSL_set_{accept,connect}_state be called before
11430 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
11431 in many applications because usually everything *appeared* to work as
11432 intended anyway -- now it really works as intended).
11435 *) Move openssl.cnf out of lib/.
11438 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
11439 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
11440 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
11441 [Ralf S. Engelschall]
11443 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
11444 handle PKCS#7 enveloped data properly.
11445 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
11447 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
11448 copying pointers. The cert_st handling is changed by this in
11449 various ways (and thus what used to be known as ctx->default_cert
11450 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
11451 any longer when s->cert does not give us what we need).
11452 ssl_cert_instantiate becomes obsolete by this change.
11453 As soon as we've got the new code right (possibly it already is?),
11454 we have solved a couple of bugs of the earlier code where s->cert
11455 was used as if it could not have been shared with other SSL structures.
11457 Note that using the SSL API in certain dirty ways now will result
11458 in different behaviour than observed with earlier library versions:
11459 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
11460 does not influence s as it used to.
11462 In order to clean up things more thoroughly, inside SSL_SESSION
11463 we don't use CERT any longer, but a new structure SESS_CERT
11464 that holds per-session data (if available); currently, this is
11465 the peer's certificate chain and, for clients, the server's certificate
11466 and temporary key. CERT holds only those values that can have
11467 meaningful defaults in an SSL_CTX.
11470 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
11471 from the internal representation. Various PKCS#7 fixes: remove some
11472 evil casts and set the enc_dig_alg field properly based on the signing
11476 *) Allow PKCS#12 password to be set from the command line or the
11477 environment. Let 'ca' get its config file name from the environment
11478 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
11482 *) Allow certificate policies extension to use an IA5STRING for the
11483 organization field. This is contrary to the PKIX definition but
11484 VeriSign uses it and IE5 only recognises this form. Document 'x509'
11488 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
11489 without disallowing inline assembler and the like for non-pedantic builds.
11492 *) Support Borland C++ builder.
11493 [Janez Jere <jj@void.si>, modified by Ulf Möller]
11495 *) Support Mingw32.
11498 *) SHA-1 cleanups and performance enhancements.
11499 [Andy Polyakov <appro@fy.chalmers.se>]
11501 *) Sparc v8plus assembler for the bignum library.
11502 [Andy Polyakov <appro@fy.chalmers.se>]
11504 *) Accept any -xxx and +xxx compiler options in Configure.
11507 *) Update HPUX configuration.
11510 *) Add missing sk_<type>_unshift() function to safestack.h
11511 [Ralf S. Engelschall]
11513 *) New function SSL_CTX_use_certificate_chain_file that sets the
11514 "extra_cert"s in addition to the certificate. (This makes sense
11515 only for "PEM" format files, as chains as a whole are not
11519 *) Support verify_depth from the SSL API.
11520 x509_vfy.c had what can be considered an off-by-one-error:
11521 Its depth (which was not part of the external interface)
11522 was actually counting the number of certificates in a chain;
11523 now it really counts the depth.
11526 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
11527 instead of X509err, which often resulted in confusing error
11528 messages since the error codes are not globally unique
11529 (e.g. an alleged error in ssl3_accept when a certificate
11530 didn't match the private key).
11532 *) New function SSL_CTX_set_session_id_context that allows to set a default
11533 value (so that you don't need SSL_set_session_id_context for each
11534 connection using the SSL_CTX).
11537 *) OAEP decoding bug fix.
11540 *) Support INSTALL_PREFIX for package builders, as proposed by
11544 *) New Configure options "threads" and "no-threads". For systems
11545 where the proper compiler options are known (currently Solaris
11546 and Linux), "threads" is the default.
11549 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
11552 *) Install various scripts to $(OPENSSLDIR)/misc, not to
11553 $(INSTALLTOP)/bin -- they shouldn't clutter directories
11554 such as /usr/local/bin.
11557 *) "make linux-shared" to build shared libraries.
11558 [Niels Poppe <niels@netbox.org>]
11560 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
11563 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
11564 extension adding in x509 utility.
11567 *) Remove NOPROTO sections and error code comments.
11570 *) Partial rewrite of the DEF file generator to now parse the ANSI
11574 *) New Configure options --prefix=DIR and --openssldir=DIR.
11577 *) Complete rewrite of the error code script(s). It is all now handled
11578 by one script at the top level which handles error code gathering,
11579 header rewriting and C source file generation. It should be much better
11580 than the old method: it now uses a modified version of Ulf's parser to
11581 read the ANSI prototypes in all header files (thus the old K&R definitions
11582 aren't needed for error creation any more) and do a better job of
11583 translating function codes into names. The old 'ASN1 error code imbedded
11584 in a comment' is no longer necessary and it doesn't use .err files which
11585 have now been deleted. Also the error code call doesn't have to appear all
11586 on one line (which resulted in some large lines...).
11589 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
11592 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
11593 0 (which usually indicates a closed connection), but continue reading.
11596 *) Fix some race conditions.
11599 *) Add support for CRL distribution points extension. Add Certificate
11600 Policies and CRL distribution points documentation.
11603 *) Move the autogenerated header file parts to crypto/opensslconf.h.
11606 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
11607 8 of keying material. Merlin has also confirmed interop with this fix
11608 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
11609 [Merlin Hughes <merlin@baltimore.ie>]
11611 *) Fix lots of warnings.
11612 [Richard Levitte <levitte@stacken.kth.se>]
11614 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
11615 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
11616 [Richard Levitte <levitte@stacken.kth.se>]
11618 *) Fix problems with sizeof(long) == 8.
11619 [Andy Polyakov <appro@fy.chalmers.se>]
11621 *) Change functions to ANSI C.
11624 *) Fix typos in error codes.
11625 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
11627 *) Remove defunct assembler files from Configure.
11630 *) SPARC v8 assembler BIGNUM implementation.
11631 [Andy Polyakov <appro@fy.chalmers.se>]
11633 *) Support for Certificate Policies extension: both print and set.
11634 Various additions to support the r2i method this uses.
11637 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
11638 return a const string when you are expecting an allocated buffer.
11641 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
11642 types DirectoryString and DisplayText.
11645 *) Add code to allow r2i extensions to access the configuration database,
11646 add an LHASH database driver and add several ctx helper functions.
11649 *) Fix an evil bug in bn_expand2() which caused various BN functions to
11650 fail when they extended the size of a BIGNUM.
11653 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
11654 support typesafe stack.
11657 *) Fix typo in SSL_[gs]et_options().
11658 [Nils Frostberg <nils@medcom.se>]
11660 *) Delete various functions and files that belonged to the (now obsolete)
11661 old X509V3 handling code.
11664 *) New Configure option "rsaref".
11667 *) Don't auto-generate pem.h.
11670 *) Introduce type-safe ASN.1 SETs.
11673 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
11674 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
11676 *) Introduce type-safe STACKs. This will almost certainly break lots of code
11677 that links with OpenSSL (well at least cause lots of warnings), but fear
11678 not: the conversion is trivial, and it eliminates loads of evil casts. A
11679 few STACKed things have been converted already. Feel free to convert more.
11680 In the fullness of time, I'll do away with the STACK type altogether.
11683 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
11684 specified in <certfile> by updating the entry in the index.txt file.
11685 This way one no longer has to edit the index.txt file manually for
11686 revoking a certificate. The -revoke option does the gory details now.
11687 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
11689 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
11690 `-text' option at all and this way the `-noout -text' combination was
11691 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
11692 [Ralf S. Engelschall]
11694 *) Make sure a corresponding plain text error message exists for the
11695 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
11696 verify callback function determined that a certificate was revoked.
11697 [Ralf S. Engelschall]
11699 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
11700 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
11701 all available cipers including rc5, which was forgotten until now.
11702 In order to let the testing shell script know which algorithms
11703 are available, a new (up to now undocumented) command
11704 "openssl list-cipher-commands" is used.
11707 *) Bugfix: s_client occasionally would sleep in select() when
11708 it should have checked SSL_pending() first.
11711 *) New functions DSA_do_sign and DSA_do_verify to provide access to
11712 the raw DSA values prior to ASN.1 encoding.
11715 *) Tweaks to Configure
11716 [Niels Poppe <niels@netbox.org>]
11718 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
11722 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
11725 *) New config option to avoid instructions that are illegal on the 80386.
11726 The default code is faster, but requires at least a 486.
11729 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
11730 SSL2_SERVER_VERSION (not used at all) macros, which are now the
11731 same as SSL2_VERSION anyway.
11734 *) New "-showcerts" option for s_client.
11737 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
11738 application. Various cleanups and fixes.
11741 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
11742 modify error routines to work internally. Add error codes and PBE init
11743 to library startup routines.
11746 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
11747 packing functions to asn1 and evp. Changed function names and error
11748 codes along the way.
11751 *) PKCS12 integration: and so it begins... First of several patches to
11752 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
11753 objects to objects.h
11756 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
11757 and display support for Thawte strong extranet extension.
11760 *) Add LinuxPPC support.
11761 [Jeff Dubrule <igor@pobox.org>]
11763 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
11764 bn_div_words in alpha.s.
11765 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
11767 *) Make sure the RSA OAEP test is skipped under -DRSAref because
11768 OAEP isn't supported when OpenSSL is built with RSAref.
11769 [Ulf Moeller <ulf@fitug.de>]
11771 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
11772 so they no longer are missing under -DNOPROTO.
11773 [Soren S. Jorvang <soren@t.dk>]
11776 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
11778 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
11779 doesn't work when the session is reused. Coming soon!
11782 *) Fix a security hole, that allows sessions to be reused in the wrong
11783 context thus bypassing client cert protection! All software that uses
11784 client certs and session caches in multiple contexts NEEDS PATCHING to
11785 allow session reuse! A fuller solution is in the works.
11786 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
11788 *) Some more source tree cleanups (removed obsolete files
11789 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
11790 permission on "config" script to be executable) and a fix for the INSTALL
11792 [Ulf Moeller <ulf@fitug.de>]
11794 *) Remove some legacy and erroneous uses of malloc, free instead of
11796 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
11798 *) Make rsa_oaep_test return non-zero on error.
11799 [Ulf Moeller <ulf@fitug.de>]
11801 *) Add support for native Solaris shared libraries. Configure
11802 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
11803 if someone would make that last step automatic.
11804 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
11806 *) ctx_size was not built with the right compiler during "make links". Fixed.
11809 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
11810 except NULL ciphers". This means the default cipher list will no longer
11811 enable NULL ciphers. They need to be specifically enabled e.g. with
11812 the string "DEFAULT:eNULL".
11815 *) Fix to RSA private encryption routines: if p < q then it would
11816 occasionally produce an invalid result. This will only happen with
11817 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
11820 *) Be less restrictive and allow also `perl util/perlpath.pl
11821 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
11822 because this way one can also use an interpreter named `perl5' (which is
11823 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
11824 installed as `perl').
11825 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
11827 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
11828 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
11830 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
11831 advapi32.lib to Win32 build and change the pem test comparison
11832 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
11833 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
11834 and crypto/des/ede_cbcm_enc.c.
11837 *) DES quad checksum was broken on big-endian architectures. Fixed.
11840 *) Comment out two functions in bio.h that aren't implemented. Fix up the
11841 Win32 test batch file so it (might) work again. The Win32 test batch file
11842 is horrible: I feel ill....
11845 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
11846 in e_os.h. Audit of header files to check ANSI and non ANSI
11847 sections: 10 functions were absent from non ANSI section and not exported
11848 from Windows DLLs. Fixed up libeay.num for new functions.
11851 *) Make `openssl version' output lines consistent.
11852 [Ralf S. Engelschall]
11854 *) Fix Win32 symbol export lists for BIO functions: Added
11855 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
11856 to ms/libeay{16,32}.def.
11857 [Ralf S. Engelschall]
11859 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
11860 fine under Unix and passes some trivial tests I've now added. But the
11861 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
11862 added to make sure no one expects that this stuff really works in the
11863 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
11864 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
11866 [Ralf S. Engelschall]
11868 *) Fix the generation of two part addresses in perl.
11869 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
11871 *) Add config entry for Linux on MIPS.
11872 [John Tobey <jtobey@channel1.com>]
11874 *) Make links whenever Configure is run, unless we are on Windoze.
11877 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
11878 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
11882 *) Add a useful kludge to allow package maintainers to specify compiler and
11883 other platforms details on the command line without having to patch the
11884 Configure script everytime: One now can use ``perl Configure
11885 <id>:<details>'', i.e. platform ids are allowed to have details appended
11886 to them (separated by colons). This is treated as there would be a static
11887 pre-configured entry in Configure's %table under key <id> with value
11888 <details> and ``perl Configure <id>'' is called. So, when you want to
11889 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
11890 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
11891 now, which overrides the FreeBSD-elf entry on-the-fly.
11892 [Ralf S. Engelschall]
11894 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
11897 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
11898 on the `perl Configure ...' command line. This way one can compile
11899 OpenSSL libraries with Position Independent Code (PIC) which is needed
11900 for linking it into DSOs.
11901 [Ralf S. Engelschall]
11903 *) Remarkably, export ciphers were totally broken and no-one had noticed!
11907 *) Cleaned up the LICENSE document: The official contact for any license
11908 questions now is the OpenSSL core team under openssl-core@openssl.org.
11909 And add a paragraph about the dual-license situation to make sure people
11910 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
11911 to the OpenSSL toolkit.
11912 [Ralf S. Engelschall]
11914 *) General source tree makefile cleanups: Made `making xxx in yyy...'
11915 display consistent in the source tree and replaced `/bin/rm' by `rm'.
11916 Additionally cleaned up the `make links' target: Remove unnecessary
11917 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
11918 to speed processing and no longer clutter the display with confusing
11919 stuff. Instead only the actually done links are displayed.
11920 [Ralf S. Engelschall]
11922 *) Permit null encryption ciphersuites, used for authentication only. It used
11923 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
11924 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
11928 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
11929 signed attributes when verifying signatures (this would break them),
11930 the detached data encoding was wrong and public keys obtained using
11931 X509_get_pubkey() weren't freed.
11934 *) Add text documentation for the BUFFER functions. Also added a work around
11935 to a Win95 console bug. This was triggered by the password read stuff: the
11936 last character typed gets carried over to the next fread(). If you were
11937 generating a new cert request using 'req' for example then the last
11938 character of the passphrase would be CR which would then enter the first
11942 *) Added the new `Includes OpenSSL Cryptography Software' button as
11943 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
11944 button and can be used by applications based on OpenSSL to show the
11945 relationship to the OpenSSL project.
11946 [Ralf S. Engelschall]
11948 *) Remove confusing variables in function signatures in files
11949 ssl/ssl_lib.c and ssl/ssl.h.
11950 [Lennart Bong <lob@kulthea.stacken.kth.se>]
11952 *) Don't install bss_file.c under PREFIX/include/
11953 [Lennart Bong <lob@kulthea.stacken.kth.se>]
11955 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
11956 functions that return function pointers and has support for NT specific
11957 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
11958 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
11959 unsigned to signed types: this was killing the Win32 compile.
11962 *) Add new certificate file to stack functions,
11963 SSL_add_dir_cert_subjects_to_stack() and
11964 SSL_add_file_cert_subjects_to_stack(). These largely supplant
11965 SSL_load_client_CA_file(), and can be used to add multiple certs easily
11966 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
11967 This means that Apache-SSL and similar packages don't have to mess around
11968 to add as many CAs as they want to the preferred list.
11971 *) Experiment with doxygen documentation. Currently only partially applied to
11973 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
11974 openssl.doxy as the configuration file.
11977 *) Get rid of remaining C++-style comments which strict C compilers hate.
11978 [Ralf S. Engelschall, pointed out by Carlos Amengual]
11980 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
11981 compiled in by default: it has problems with large keys.
11984 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
11985 DH private keys and/or callback functions which directly correspond to
11986 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
11987 is needed for applications which have to configure certificates on a
11988 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
11990 For the RSA certificate situation is makes no difference, but
11991 for the DSA certificate situation this fixes the "no shared cipher"
11992 problem where the OpenSSL cipher selection procedure failed because the
11993 temporary keys were not overtaken from the context and the API provided
11994 no way to reconfigure them.
11995 The new functions now let applications reconfigure the stuff and they
11996 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
11997 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
11998 non-public-API function ssl_cert_instantiate() is used as a helper
11999 function and also to reduce code redundancy inside ssl_rsa.c.
12000 [Ralf S. Engelschall]
12002 *) Move s_server -dcert and -dkey options out of the undocumented feature
12003 area because they are useful for the DSA situation and should be
12004 recognized by the users.
12005 [Ralf S. Engelschall]
12007 *) Fix the cipher decision scheme for export ciphers: the export bits are
12008 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
12009 SSL_EXP_MASK. So, the original variable has to be used instead of the
12010 already masked variable.
12011 [Richard Levitte <levitte@stacken.kth.se>]
12013 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
12014 [Richard Levitte <levitte@stacken.kth.se>]
12016 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
12017 from `int' to `unsigned int' because it's a length and initialized by
12018 EVP_DigestFinal() which expects an `unsigned int *'.
12019 [Richard Levitte <levitte@stacken.kth.se>]
12021 *) Don't hard-code path to Perl interpreter on shebang line of Configure
12022 script. Instead use the usual Shell->Perl transition trick.
12023 [Ralf S. Engelschall]
12025 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
12026 (in addition to RSA certificates) to match the behaviour of `openssl dsa
12027 -noout -modulus' as it's already the case for `openssl rsa -noout
12028 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
12029 currently the public key is printed (a decision which was already done by
12030 `openssl dsa -modulus' in the past) which serves a similar purpose.
12031 Additionally the NO_RSA no longer completely removes the whole -modulus
12032 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
12034 [Ralf S. Engelschall]
12036 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
12037 BIO. See the source (crypto/evp/bio_ok.c) for more info.
12038 [Arne Ansper <arne@ats.cyber.ee>]
12040 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
12041 to be added. Now both 'req' and 'ca' can use new objects defined in the
12045 *) Add cool BIO that does syslog (or event log on NT).
12046 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
12048 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
12049 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
12050 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
12051 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
12054 *) Add preliminary config info for new extension code.
12057 *) Make RSA_NO_PADDING really use no padding.
12058 [Ulf Moeller <ulf@fitug.de>]
12060 *) Generate errors when private/public key check is done.
12063 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
12064 for some CRL extensions and new objects added.
12067 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
12068 key usage extension and fuller support for authority key id.
12071 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
12072 padding method for RSA, which is recommended for new applications in PKCS
12073 #1 v2.0 (RFC 2437, October 1998).
12074 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
12075 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
12076 against Bleichbacher's attack on RSA.
12077 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
12080 *) Updates to the new SSL compression code
12081 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
12083 *) Fix so that the version number in the master secret, when passed
12084 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
12085 (because the server will not accept higher), that the version number
12086 is 0x03,0x01, not 0x03,0x00
12087 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
12089 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
12090 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
12091 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
12094 *) Support for RAW extensions where an arbitrary extension can be
12095 created by including its DER encoding. See apps/openssl.cnf for
12099 *) Make sure latest Perl versions don't interpret some generated C array
12100 code as Perl array code in the crypto/err/err_genc.pl script.
12101 [Lars Weber <3weber@informatik.uni-hamburg.de>]
12103 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
12104 not many people have the assembler. Various Win32 compilation fixes and
12105 update to the INSTALL.W32 file with (hopefully) more accurate Win32
12106 build instructions.
12109 *) Modify configure script 'Configure' to automatically create crypto/date.h
12110 file under Win32 and also build pem.h from pem.org. New script
12111 util/mkfiles.pl to create the MINFO file on environments that can't do a
12112 'make files': perl util/mkfiles.pl >MINFO should work.
12115 *) Major rework of DES function declarations, in the pursuit of correctness
12116 and purity. As a result, many evil casts evaporated, and some weirdness,
12117 too. You may find this causes warnings in your code. Zapping your evil
12118 casts will probably fix them. Mostly.
12121 *) Fix for a typo in asn1.h. Bug fix to object creation script
12122 obj_dat.pl. It considered a zero in an object definition to mean
12123 "end of object": none of the objects in objects.h have any zeros
12124 so it wasn't spotted.
12125 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
12127 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
12128 Masking (CBCM). In the absence of test vectors, the best I have been able
12129 to do is check that the decrypt undoes the encrypt, so far. Send me test
12130 vectors if you have them.
12133 *) Correct calculation of key length for export ciphers (too much space was
12134 allocated for null ciphers). This has not been tested!
12137 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
12138 message is now correct (it understands "crypto" and "ssl" on its
12139 command line). There is also now an "update" option. This will update
12140 the util/ssleay.num and util/libeay.num files with any new functions.
12142 perl util/mkdef.pl crypto ssl update
12143 it will update them.
12146 *) Overhauled the Perl interface (perl/*):
12147 - ported BN stuff to OpenSSL's different BN library
12148 - made the perl/ source tree CVS-aware
12149 - renamed the package from SSLeay to OpenSSL (the files still contain
12150 their history because I've copied them in the repository)
12151 - removed obsolete files (the test scripts will be replaced
12152 by better Test::Harness variants in the future)
12153 [Ralf S. Engelschall]
12155 *) First cut for a very conservative source tree cleanup:
12156 1. merge various obsolete readme texts into doc/ssleay.txt
12157 where we collect the old documents and readme texts.
12158 2. remove the first part of files where I'm already sure that we no
12159 longer need them because of three reasons: either they are just temporary
12160 files which were left by Eric or they are preserved original files where
12161 I've verified that the diff is also available in the CVS via "cvs diff
12162 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
12163 the crypto/md/ stuff).
12164 [Ralf S. Engelschall]
12166 *) More extension code. Incomplete support for subject and issuer alt
12167 name, issuer and authority key id. Change the i2v function parameters
12168 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
12169 what that's for :-) Fix to ASN1 macro which messed up
12170 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
12173 *) Preliminary support for ENUMERATED type. This is largely copied from the
12177 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
12178 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
12180 *) Make sure `make rehash' target really finds the `openssl' program.
12181 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
12183 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
12184 like to hear about it if this slows down other processors.
12187 *) Add CygWin32 platform information to Configure script.
12188 [Alan Batie <batie@aahz.jf.intel.com>]
12190 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
12191 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
12193 *) New program nseq to manipulate netscape certificate sequences
12196 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
12200 *) Fixes to BN code. Previously the default was to define BN_RECURSION
12201 but the BN code had some problems that would cause failures when
12202 doing certificate verification and some other functions.
12203 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
12205 *) Add ASN1 and PEM code to support netscape certificate sequences.
12208 *) Add ASN1 and PEM code to support netscape certificate sequences.
12211 *) Add several PKIX and private extended key usage OIDs.
12214 *) Modify the 'ca' program to handle the new extension code. Modify
12215 openssl.cnf for new extension format, add comments.
12218 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
12219 and add a sample to openssl.cnf so req -x509 now adds appropriate
12223 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
12224 error code, add initial support to X509_print() and x509 application.
12227 *) Takes a deep breath and start adding X509 V3 extension support code. Add
12228 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
12229 stuff is currently isolated and isn't even compiled yet.
12232 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
12233 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
12234 Removed the versions check from X509 routines when loading extensions:
12235 this allows certain broken certificates that don't set the version
12236 properly to be processed.
12239 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
12240 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
12241 can still be regenerated with "make depend".
12244 *) Spelling mistake in C version of CAST-128.
12245 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
12247 *) Changes to the error generation code. The perl script err-code.pl
12248 now reads in the old error codes and retains the old numbers, only
12249 adding new ones if necessary. It also only changes the .err files if new
12250 codes are added. The makefiles have been modified to only insert errors
12251 when needed (to avoid needlessly modifying header files). This is done
12252 by only inserting errors if the .err file is newer than the auto generated
12253 C file. To rebuild all the error codes from scratch (the old behaviour)
12254 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
12255 or delete all the .err files.
12258 *) CAST-128 was incorrectly implemented for short keys. The C version has
12259 been fixed, but is untested. The assembler versions are also fixed, but
12260 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
12261 to regenerate it if needed.
12262 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
12263 Hagino <itojun@kame.net>]
12265 *) File was opened incorrectly in randfile.c.
12266 [Ulf Möller <ulf@fitug.de>]
12268 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
12269 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
12270 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
12271 al: it's just almost always a UTCTime. Note this patch adds new error
12272 codes so do a "make errors" if there are problems.
12275 *) Correct Linux 1 recognition in config.
12276 [Ulf Möller <ulf@fitug.de>]
12278 *) Remove pointless MD5 hash when using DSA keys in ca.
12279 [Anonymous <nobody@replay.com>]
12281 *) Generate an error if given an empty string as a cert directory. Also
12282 generate an error if handed NULL (previously returned 0 to indicate an
12283 error, but didn't set one).
12284 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
12286 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
12289 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
12290 parameters. This was causing a warning which killed off the Win32 compile.
12293 *) Remove C++ style comments from crypto/bn/bn_local.h.
12294 [Neil Costigan <neil.costigan@celocom.com>]
12296 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
12297 based on a text string, looking up short and long names and finally
12298 "dot" format. The "dot" format stuff didn't work. Added new function
12299 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
12300 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
12301 OID is not part of the table.
12304 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
12305 X509_LOOKUP_by_alias().
12308 *) Sort openssl functions by name.
12311 *) Get the gendsa program working (hopefully) and add it to app list. Remove
12312 encryption from sample DSA keys (in case anyone is interested the password
12316 *) Make _all_ *_free functions accept a NULL pointer.
12317 [Frans Heymans <fheymans@isaserver.be>]
12319 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
12321 [Anonymous <nobody@replay.com>]
12323 *) s_server should send the CAfile as acceptable CAs, not its own cert.
12324 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
12326 *) Don't blow it for numeric -newkey arguments to apps/req.
12327 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
12329 *) Temp key "for export" tests were wrong in s3_srvr.c.
12330 [Anonymous <nobody@replay.com>]
12332 *) Add prototype for temp key callback functions
12333 SSL_CTX_set_tmp_{rsa,dh}_callback().
12336 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
12337 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
12340 *) X509_name_add_entry() freed the wrong thing after an error.
12341 [Arne Ansper <arne@ats.cyber.ee>]
12343 *) rsa_eay.c would attempt to free a NULL context.
12344 [Arne Ansper <arne@ats.cyber.ee>]
12346 *) BIO_s_socket() had a broken should_retry() on Windoze.
12347 [Arne Ansper <arne@ats.cyber.ee>]
12349 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
12350 [Arne Ansper <arne@ats.cyber.ee>]
12352 *) Make sure the already existing X509_STORE->depth variable is initialized
12353 in X509_STORE_new(), but document the fact that this variable is still
12354 unused in the certificate verification process.
12355 [Ralf S. Engelschall]
12357 *) Fix the various library and apps files to free up pkeys obtained from
12358 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
12361 *) Fix reference counting in X509_PUBKEY_get(). This makes
12362 demos/maurice/example2.c work, amongst others, probably.
12363 [Steve Henson and Ben Laurie]
12365 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
12366 `openssl' and second, the shortcut symlinks for the `openssl <command>'
12367 are no longer created. This way we have a single and consistent command
12368 line interface `openssl <command>', similar to `cvs <command>'.
12369 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
12371 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
12372 BIT STRING wrapper always have zero unused bits.
12375 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
12378 *) Make the top-level INSTALL documentation easier to understand.
12381 *) Makefiles updated to exit if an error occurs in a sub-directory
12382 make (including if user presses ^C) [Paul Sutton]
12384 *) Make Montgomery context stuff explicit in RSA data structure.
12387 *) Fix build order of pem and err to allow for generated pem.h.
12390 *) Fix renumbering bug in X509_NAME_delete_entry().
12393 *) Enhanced the err-ins.pl script so it makes the error library number
12394 global and can add a library name. This is needed for external ASN1 and
12395 other error libraries.
12398 *) Fixed sk_insert which never worked properly.
12401 *) Fix ASN1 macros so they can handle indefinite length constructed
12402 EXPLICIT tags. Some non standard certificates use these: they can now
12406 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
12407 into a single doc/ssleay.txt bundle. This way the information is still
12408 preserved but no longer messes up this directory. Now it's new room for
12409 the new set of documentation files.
12410 [Ralf S. Engelschall]
12412 *) SETs were incorrectly DER encoded. This was a major pain, because they
12413 shared code with SEQUENCEs, which aren't coded the same. This means that
12414 almost everything to do with SETs or SEQUENCEs has either changed name or
12415 number of arguments.
12416 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
12418 *) Fix test data to work with the above.
12421 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
12422 was already fixed by Eric for 0.9.1 it seems.
12423 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
12425 *) Autodetect FreeBSD3.
12428 *) Fix various bugs in Configure. This affects the following platforms:
12432 unixware-2.0-pentium
12436 *) Eliminate generated files from CVS. Reorder tests to regenerate files
12437 before they are needed.
12440 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
12444 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
12446 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
12447 changed SSLeay to OpenSSL in version strings.
12448 [Ralf S. Engelschall]
12450 *) Some fixups to the top-level documents.
12453 *) Fixed the nasty bug where rsaref.h was not found under compile-time
12454 because the symlink to include/ was missing.
12455 [Ralf S. Engelschall]
12457 *) Incorporated the popular no-RSA/DSA-only patches
12458 which allow to compile a RSA-free SSLeay.
12459 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
12461 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
12462 when "ssleay" is still not found.
12463 [Ralf S. Engelschall]
12465 *) Added more platforms to Configure: Cray T3E, HPUX 11,
12466 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
12468 *) Updated the README file.
12469 [Ralf S. Engelschall]
12471 *) Added various .cvsignore files in the CVS repository subdirs
12472 to make a "cvs update" really silent.
12473 [Ralf S. Engelschall]
12475 *) Recompiled the error-definition header files and added
12476 missing symbols to the Win32 linker tables.
12477 [Ralf S. Engelschall]
12479 *) Cleaned up the top-level documents;
12480 o new files: CHANGES and LICENSE
12481 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
12482 o merged COPYRIGHT into LICENSE
12483 o removed obsolete TODO file
12484 o renamed MICROSOFT to INSTALL.W32
12485 [Ralf S. Engelschall]
12487 *) Removed dummy files from the 0.9.1b source tree:
12488 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
12489 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
12490 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
12491 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
12492 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
12493 [Ralf S. Engelschall]
12495 *) Added various platform portability fixes.
12498 *) The Genesis of the OpenSSL rpject:
12499 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
12500 Young and Tim J. Hudson created while they were working for C2Net until
12502 [The OpenSSL Project]
12505 Changes between 0.9.0b and 0.9.1b [not released]
12507 *) Updated a few CA certificates under certs/
12510 *) Changed some BIGNUM api stuff.
12513 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
12514 DGUX x86, Linux Alpha, etc.
12517 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
12518 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
12522 *) Add -strparse option to asn1pars program which parses nested
12524 [Dr Stephen Henson <shenson@bigfoot.com>]
12526 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
12529 *) DSA fix for "ca" program.
12532 *) Added "-genkey" option to "dsaparam" program.
12535 *) Added RIPE MD160 (rmd160) message digest.
12538 *) Added -a (all) option to "ssleay version" command.
12541 *) Added PLATFORM define which is the id given to Configure.
12544 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
12547 *) Extended the ASN.1 parser routines.
12550 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
12553 *) Added a BN_CTX to the BN library.
12556 *) Fixed the weak key values in DES library
12559 *) Changed API in EVP library for cipher aliases.
12562 *) Added support for RC2/64bit cipher.
12565 *) Converted the lhash library to the crypto/mem.c functions.
12568 *) Added more recognized ASN.1 object ids.
12571 *) Added more RSA padding checks for SSL/TLS.
12574 *) Added BIO proxy/filter functionality.
12577 *) Added extra_certs to SSL_CTX which can be used
12578 send extra CA certificates to the client in the CA cert chain sending
12579 process. It can be configured with SSL_CTX_add_extra_chain_cert().
12582 *) Now Fortezza is denied in the authentication phase because
12583 this is key exchange mechanism is not supported by SSLeay at all.
12586 *) Additional PKCS1 checks.
12589 *) Support the string "TLSv1" for all TLS v1 ciphers.
12592 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
12593 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
12596 *) Fixed a few memory leaks.
12599 *) Fixed various code and comment typos.
12602 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
12603 bytes sent in the client random.
12604 [Edward Bishop <ebishop@spyglass.com>]