test/recipes/80-test_ssl_old.t

   1 #! /usr/bin/env perl
   2 # Copyright 2015-2022 The OpenSSL Project Authors. All Rights Reserved.
   3 #
   4 # Licensed under the Apache License 2.0 (the "License").  You may not use
   5 # this file except in compliance with the License.  You can obtain a copy
   6 # in the file LICENSE in the source distribution or at
   7 # https://www.openssl.org/source/license.html
   8
   9
  10 use strict;
  11 use warnings;
  12
  13 use POSIX;
  14 use File::Basename;
  15 use File::Copy;
  16 use OpenSSL::Test qw/:DEFAULT with bldtop_file bldtop_dir srctop_file srctop_dir cmdstr data_file/;
  17 use OpenSSL::Test::Utils;
  18
  19 BEGIN {
  20 setup("test_ssl_old");
  21 }
  22
  23 use lib srctop_dir('Configurations');
  24 use lib bldtop_dir('.');
  25
  26 my $no_fips = disabled('fips') || ($ENV{NO_FIPS} // 0);
  27 my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_psk,
  28     $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2, $no_tls1_3,
  29     $no_dtls, $no_dtls1, $no_dtls1_2, $no_ct) =
  30     anydisabled qw/rsa dsa dh ec psk
  31                    ssl3 tls1 tls1_1 tls1_2 tls1_3
  32                    dtls dtls1 dtls1_2 ct/;
  33 #If ec and dh are disabled then don't use TLSv1.3
  34 $no_tls1_3 = 1 if (!$no_tls1_3 && $no_ec && $no_dh);
  35 my $no_anytls = alldisabled(available_protocols("tls"));
  36 my $no_anydtls = alldisabled(available_protocols("dtls"));
  37
  38 plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build"
  39     if $no_anytls && $no_anydtls;
  40
  41 my $digest = "-sha1";
  42 my @reqcmd = ("openssl", "req");
  43 my @x509cmd = ("openssl", "x509", $digest);
  44 my @verifycmd = ("openssl", "verify");
  45 my @genpkeycmd = ("openssl", "genpkey");
  46 my $dummycnf = srctop_file("apps", "openssl.cnf");
  47
  48 my $cnf = srctop_file("test", "ca-and-certs.cnf");
  49 my $CAkey = srctop_file("test", "certs", "ca-key.pem"); # "keyCA.ss"
  50 my $CAcert="certCA.ss";
  51 my $CAserial="certCA.srl";
  52 my $CAreq="reqCA.ss";
  53 my $CAreq2="req2CA.ss"; # temp
  54 my $Ukey = srctop_file("test", "certs", "ee-key.pem"); # "keyU.ss";
  55 my $Ureq="reqU.ss";
  56 my $Ucert="certU.ss";
  57 my $Dkey="keyD.ss";
  58 my $Dreq="reqD.ss";
  59 my $Dcert="certD.ss";
  60 my $Ekey="keyE.ss";
  61 my $Ereq="reqE.ss";
  62 my $Ecert="certE.ss";
  63
  64 my $proxycnf=srctop_file("test", "proxy.cnf");
  65 my $P1key= srctop_file("test", "certs", "alt1-key.pem"); # "keyP1.ss";
  66 my $P1req="reqP1.ss";
  67 my $P1cert="certP1.ss";
  68 my $P1intermediate="tmp_intP1.ss";
  69 my $P2key= srctop_file("test", "certs", "alt2-key.pem"); # "keyP2.ss";
  70 my $P2req="reqP2.ss";
  71 my $P2cert="certP2.ss";
  72 my $P2intermediate="tmp_intP2.ss";
  73
  74 my $server_sess="server.ss";
  75 my $client_sess="client.ss";
  76
  77 # ssl_old_test.c is deprecated in favour of the new framework in ssl_test.c
  78 # If you're adding tests here, you probably want to convert them to the
  79 # new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead.
  80 plan tests =>
  81    ($no_fips ? 0 : 6)     # testssl with fips provider
  82     + 1                   # For testss
  83     + 5                   # For the testssl with default provider
  84     + 1                   # For security level 0 failure tests
  85     ;
  86
  87 subtest 'test_ss' => sub {
  88     if (testss()) {
  89         open OUT, ">", "intP1.ss";
  90         copy($CAcert, \*OUT); copy($Ucert, \*OUT);
  91         close OUT;
  92
  93         open OUT, ">", "intP2.ss";
  94         copy($CAcert, \*OUT); copy($Ucert, \*OUT); copy($P1cert, \*OUT);
  95         close OUT;
  96     }
  97 };
  98
  99 note('test_ssl_old -- key U');
 100 my $configfile = srctop_file("test","default-and-legacy.cnf");
 101 if (disabled("legacy")) {
 102     $configfile = srctop_file("test","default.cnf");
 103 }
 104
 105 testssl($Ukey, $Ucert, $CAcert, "default", $configfile);
 106 unless ($no_fips) {
 107     testssl($Ukey, $Ucert, $CAcert, "fips",
 108             srctop_file("test","fips-and-base.cnf"));
 109 }
 110
 111 # -----------
 112 # subtest functions
 113 sub testss {
 114     my @req_dsa = ("-newkey",
 115                    "dsa:".data_file("dsa2048.pem"));
 116     my $dsaparams = data_file("dsa2048.pem");
 117     my @req_new;
 118     if ($no_rsa) {
 119         @req_new = @req_dsa;
 120     } else {
 121         @req_new = ("-new");
 122     }
 123
 124     plan tests => 17;
 125
 126   SKIP: {
 127       skip 'failure', 16 unless
 128           ok(run(app([@reqcmd, "-config", $cnf,
 129                       "-out", $CAreq, "-key", $CAkey,
 130                       @req_new])),
 131              'make cert request');
 132
 133       skip 'failure', 15 unless
 134           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
 135                       "-req", "-out", $CAcert, "-signkey", $CAkey,
 136                       "-extfile", $cnf, "-extensions", "v3_ca"],
 137                      stdout => "err.ss")),
 138              'convert request into self-signed cert');
 139
 140       skip 'failure', 14 unless
 141           ok(run(app([@x509cmd, "-in", $CAcert,
 142                       "-x509toreq", "-signkey", $CAkey, "-out", $CAreq2],
 143                      stdout => "err.ss")),
 144              'convert cert into a cert request');
 145
 146       skip 'failure', 13 unless
 147           ok(run(app([@reqcmd, "-config", $dummycnf,
 148                       "-verify", "-in", $CAreq, "-noout"])),
 149              'verify request 1');
 150
 151
 152       skip 'failure', 12 unless
 153           ok(run(app([@reqcmd, "-config", $dummycnf,
 154                       "-verify", "-in", $CAreq2, "-noout"])),
 155              'verify request 2');
 156
 157       skip 'failure', 11 unless
 158           ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])),
 159              'verify signature');
 160
 161       skip 'failure', 10 unless
 162           ok(run(app([@reqcmd, "-config", $cnf, "-section", "userreq",
 163                       "-out", $Ureq, "-key", $Ukey, @req_new],
 164                      stdout => "err.ss")),
 165              'make a user cert request');
 166
 167       skip 'failure', 9 unless
 168           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
 169                       "-req", "-out", $Ucert,
 170                       "-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
 171                       "-extfile", $cnf, "-extensions", "v3_ee"],
 172                      stdout => "err.ss"))
 173              && run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
 174              'sign user cert request');
 175
 176       skip 'failure', 8 unless
 177           ok(run(app([@x509cmd,
 178                       "-subject", "-issuer", "-startdate", "-enddate",
 179                       "-noout", "-in", $Ucert])),
 180              'Certificate details');
 181
 182       skip 'failure', 7 unless
 183           subtest 'DSA certificate creation' => sub {
 184               plan skip_all => "skipping DSA certificate creation"
 185                   if $no_dsa;
 186
 187               plan tests => 5;
 188
 189             SKIP: {
 190                 $ENV{CN2} = "DSA Certificate";
 191                 skip 'failure', 4 unless
 192                     ok(run(app([@genpkeycmd, "-out", $Dkey,
 193                                 "-paramfile", $dsaparams],
 194                                stdout => "err.ss")),
 195                        "make a DSA key");
 196                 skip 'failure', 3 unless
 197                     ok(run(app([@reqcmd, "-new", "-config", $cnf,
 198                                 "-section", "userreq",
 199                                 "-out", $Dreq, "-key", $Dkey],
 200                                stdout => "err.ss")),
 201                        "make a DSA user cert request");
 202                 skip 'failure', 2 unless
 203                     ok(run(app([@x509cmd, "-CAcreateserial",
 204                                 "-in", $Dreq,
 205                                 "-days", "30",
 206                                 "-req",
 207                                 "-out", $Dcert,
 208                                 "-CA", $CAcert, "-CAkey", $CAkey,
 209                                 "-CAserial", $CAserial,
 210                                 "-extfile", $cnf,
 211                                 "-extensions", "v3_ee_dsa"],
 212                                stdout => "err.ss")),
 213                        "sign DSA user cert request");
 214                 skip 'failure', 1 unless
 215                     ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])),
 216                        "verify DSA user cert");
 217                 skip 'failure', 0 unless
 218                     ok(run(app([@x509cmd,
 219                                 "-subject", "-issuer",
 220                                 "-startdate", "-enddate", "-noout",
 221                                 "-in", $Dcert])),
 222                        "DSA Certificate details");
 223               }
 224       };
 225
 226       skip 'failure', 6 unless
 227           subtest 'ECDSA/ECDH certificate creation' => sub {
 228               plan skip_all => "skipping ECDSA/ECDH certificate creation"
 229                   if $no_ec;
 230
 231               plan tests => 5;
 232
 233             SKIP: {
 234                 $ENV{CN2} = "ECDSA Certificate";
 235                 skip 'failure', 4 unless
 236                     ok(run(app(["openssl", "genpkey", "-genparam",
 237                                 "-algorithm", "EC",
 238                                 "-pkeyopt", "ec_paramgen_curve:P-256",
 239                                 "-pkeyopt", "ec_param_enc:named_curve",
 240                                 "-out", "ecp.ss"])),
 241                        "make EC parameters");
 242                 skip 'failure', 3 unless
 243                     ok(run(app([@reqcmd, "-config", $cnf,
 244                                 "-section", "userreq",
 245                                 "-out", $Ereq, "-keyout", $Ekey,
 246                                 "-newkey", "ec:ecp.ss"],
 247                                stdout => "err.ss")),
 248                        "make a ECDSA/ECDH user cert request");
 249                 skip 'failure', 2 unless
 250                     ok(run(app([@x509cmd, "-CAcreateserial",
 251                                 "-in", $Ereq,
 252                                 "-days", "30",
 253                                 "-req",
 254                                 "-out", $Ecert,
 255                                 "-CA", $CAcert, "-CAkey", $CAkey,
 256                                 "-CAserial", $CAserial,
 257                                 "-extfile", $cnf,
 258                                 "-extensions", "v3_ee_ec"],
 259                                stdout => "err.ss")),
 260                        "sign ECDSA/ECDH user cert request");
 261                 skip 'failure', 1 unless
 262                     ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])),
 263                        "verify ECDSA/ECDH user cert");
 264                 skip 'failure', 0 unless
 265                     ok(run(app([@x509cmd,
 266                                 "-subject", "-issuer",
 267                                 "-startdate", "-enddate", "-noout",
 268                                 "-in", $Ecert])),
 269                        "ECDSA Certificate details");
 270               }
 271       };
 272
 273       skip 'failure', 5 unless
 274           ok(run(app([@reqcmd, "-config", $proxycnf,
 275                       "-out", $P1req, "-key", $P1key, @req_new],
 276                      stdout => "err.ss")),
 277              'make a proxy cert request');
 278
 279
 280       skip 'failure', 4 unless
 281           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",
 282                       "-req", "-out", $P1cert,
 283                       "-CA", $Ucert, "-CAkey", $Ukey,
 284                       "-extfile", $proxycnf, "-extensions", "proxy"],
 285                      stdout => "err.ss")),
 286              'sign proxy with user cert');
 287
 288       copy($Ucert, $P1intermediate);
 289       run(app([@verifycmd, "-CAfile", $CAcert,
 290                "-untrusted", $P1intermediate, $P1cert]));
 291       ok(run(app([@x509cmd,
 292                   "-subject", "-issuer", "-startdate", "-enddate",
 293                   "-noout", "-in", $P1cert])),
 294          'Certificate details');
 295
 296       skip 'failure', 2 unless
 297           ok(run(app([@reqcmd, "-config", $proxycnf, "-section", "proxy2_req",
 298                       "-out", $P2req, "-key", $P2key,
 299                       @req_new],
 300                      stdout => "err.ss")),
 301              'make another proxy cert request');
 302
 303
 304       skip 'failure', 1 unless
 305           ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",
 306                       "-req", "-out", $P2cert,
 307                       "-CA", $P1cert, "-CAkey", $P1key,
 308                       "-extfile", $proxycnf, "-extensions", "proxy_2"],
 309                      stdout => "err.ss")),
 310              'sign second proxy cert request with the first proxy cert');
 311
 312
 313       open OUT, ">", $P2intermediate;
 314       copy($Ucert, \*OUT); copy($P1cert, \*OUT);
 315       close OUT;
 316       run(app([@verifycmd, "-CAfile", $CAcert,
 317                "-untrusted", $P2intermediate, $P2cert]));
 318       ok(run(app([@x509cmd,
 319                   "-subject", "-issuer", "-startdate", "-enddate",
 320                   "-noout", "-in", $P2cert])),
 321          'Certificate details');
 322     }
 323 }
 324
 325 sub testssl {
 326     my ($key, $cert, $CAtmp, $provider, $configfile) = @_;
 327     my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));
 328     my @providerflags = ("-provider", $provider);
 329
 330     if ($provider eq "default" && !disabled("legacy")) {
 331         push @providerflags, "-provider", "legacy";
 332     }
 333
 334     my @ssltest = ("ssl_old_test",
 335                    "-s_key", $key, "-s_cert", $cert,
 336                    "-c_key", $key, "-c_cert", $cert,
 337                    "-config", $configfile,
 338                    @providerflags);
 339
 340
 341     my $serverinfo = srctop_file("test","serverinfo.pem");
 342
 343     my $dsa_cert = 0;
 344     if (grep /DSA Public Key/, run(app(["openssl", "x509", "-in", $cert,
 345                                         "-text", "-noout"]), capture => 1)) {
 346         $dsa_cert = 1;
 347     }
 348
 349     subtest 'standard SSL tests' => sub {
 350         ######################################################################
 351         plan tests => 19;
 352
 353       SKIP: {
 354           skip "SSLv3 is not supported by this OpenSSL build", 4
 355               if disabled("ssl3");
 356
 357           skip "SSLv3 is not supported by the FIPS provider", 4
 358               if $provider eq "fips";
 359
 360           ok(run(test([@ssltest, "-bio_pair", "-ssl3"])),
 361              'test sslv3 via BIO pair');
 362           ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA])),
 363              'test sslv3 with server authentication via BIO pair');
 364           ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA])),
 365              'test sslv3 with client authentication via BIO pair');
 366           ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA])),
 367              'test sslv3 with both server and client authentication via BIO pair');
 368         }
 369
 370       SKIP: {
 371           skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1
 372               if $no_anytls;
 373
 374           ok(run(test([@ssltest, "-bio_pair"])),
 375              'test sslv2/sslv3 via BIO pair');
 376         }
 377
 378       SKIP: {
 379           skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 14
 380               if $no_anytls;
 381
 382         SKIP: {
 383             skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;
 384
 385             ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe"])),
 386                'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
 387           }
 388
 389         SKIP: {
 390             skip "skipping dhe1024dsa test", 1
 391                 if ($no_dh);
 392
 393             ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v"])),
 394                'test sslv2/sslv3 with 1024bit DHE via BIO pair');
 395           }
 396
 397           ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA])),
 398              'test sslv2/sslv3 with server authentication');
 399           ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA])),
 400              'test sslv2/sslv3 with client authentication via BIO pair');
 401           ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA])),
 402              'test sslv2/sslv3 with both client and server authentication via BIO pair');
 403           ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA])),
 404              'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
 405
 406         SKIP: {
 407             skip "No IPv4 available on this machine", 4
 408                 unless !disabled("sock") && have_IPv4();
 409             ok(run(test([@ssltest, "-ipv4"])),
 410                'test TLS via IPv4');
 411             ok(run(test([@ssltest, "-ipv4", "-client_ktls"])),
 412                'test TLS via IPv4 + ktls(client)');
 413             ok(run(test([@ssltest, "-ipv4", "-server_ktls"])),
 414                'test TLS via IPv4 + ktls(server)');
 415             ok(run(test([@ssltest, "-ipv4", "-client_ktls", "-server_ktls"])),
 416                'test TLS via IPv4 + ktls');
 417           }
 418
 419         SKIP: {
 420             skip "No IPv6 available on this machine", 4
 421                 unless !disabled("sock") && have_IPv6();
 422             ok(run(test([@ssltest, "-ipv6"])),
 423                'test TLS via IPv6');
 424             ok(run(test([@ssltest, "-ipv6", "-client_ktls"])),
 425                'test TLS via IPv6 + ktls(client)');
 426             ok(run(test([@ssltest, "-ipv6", "-server_ktls"])),
 427                'test TLS via IPv6 + ktls(client)');
 428             ok(run(test([@ssltest, "-ipv6", "-client_ktls", "-server_ktls"])),
 429                'test TLS via IPv6 + ktls');
 430           }
 431         }
 432     };
 433
 434     subtest "Testing ciphersuites" => sub {
 435
 436         my @exkeys = ();
 437         my $ciphers = '-PSK:-SRP:@SECLEVEL=0';
 438
 439         if (!$no_dsa) {
 440             push @exkeys, "-s_cert", "certD.ss", "-s_key", $Dkey;
 441         }
 442
 443         if (!$no_ec) {
 444             push @exkeys, "-s_cert", "certE.ss", "-s_key", $Ekey;
 445         }
 446
 447         my @protocols = ();
 448         # We only use the flags that ssl_old_test understands
 449         push @protocols, "-tls1_3" unless $no_tls1_3;
 450         push @protocols, "-tls1_2" unless $no_tls1_2;
 451         push @protocols, "-tls1" unless $no_tls1 || $provider eq "fips";
 452         push @protocols, "-ssl3" unless $no_ssl3 || $provider eq "fips";
 453         my $protocolciphersuitecount = 0;
 454         my %ciphersuites = ();
 455         my %ciphersstatus = ();
 456         #There's no "-config" option to the ciphers command so we set the
 457         #environment variable instead
 458         my $opensslconf = $ENV{OPENSSL_CONF};
 459         $ENV{OPENSSL_CONF} = $configfile;
 460         foreach my $protocol (@protocols) {
 461             my $ciphersstatus = undef;
 462             my @ciphers = run(app(["openssl", "ciphers", "-s", $protocol,
 463                                    @providerflags,
 464                                    "ALL:$ciphers"]),
 465                                    capture => 1, statusvar => \$ciphersstatus);
 466             $ciphersstatus{$protocol} = $ciphersstatus;
 467             if ($ciphersstatus) {
 468                 $ciphersuites{$protocol} = [ map { s|\R||; split(/:/, $_) }
 469                                     @ciphers ];
 470                 $protocolciphersuitecount += scalar @{$ciphersuites{$protocol}};
 471             }
 472         }
 473         $ENV{OPENSSL_CONF} = $opensslconf;
 474
 475         plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build"
 476             if $protocolciphersuitecount + scalar(keys %ciphersuites) == 0;
 477
 478         # The count of protocols is because in addition to the ciphersuites
 479         # we got above, we're running a weak DH test for each protocol (except
 480         # TLSv1.3)
 481         my $testcount = scalar(@protocols) + $protocolciphersuitecount
 482                         + scalar(keys %ciphersuites);
 483         $testcount-- unless $no_tls1_3;
 484         plan tests => $testcount;
 485
 486         foreach my $protocol (@protocols) {
 487             ok($ciphersstatus{$protocol}, "Getting ciphers for $protocol");
 488         }
 489
 490         foreach my $protocol (sort keys %ciphersuites) {
 491             note "Testing ciphersuites for $protocol";
 492             # ssl_old_test doesn't know -tls1_3, but that's fine, since that's
 493             # the default choice if TLSv1.3 enabled
 494             my $flag = $protocol eq "-tls1_3" ? "" : $protocol;
 495             my $ciphersuites = "";
 496             foreach my $cipher (@{$ciphersuites{$protocol}}) {
 497                 if ($protocol eq "-ssl3" && $cipher =~ /ECDH/ ) {
 498                     note "*****SKIPPING $protocol $cipher";
 499                     ok(1);
 500                 } else {
 501                     if ($protocol eq "-tls1_3") {
 502                         $ciphersuites = $cipher;
 503                         $cipher = "";
 504                     } else {
 505                         $cipher = $cipher.':@SECLEVEL=0';
 506                     }
 507                     ok(run(test([@ssltest, @exkeys, "-cipher",
 508                                  $cipher,
 509                                  "-ciphersuites", $ciphersuites,
 510                                  $flag || ()])),
 511                        "Testing $cipher");
 512                 }
 513             }
 514             next if $protocol eq "-tls1_3";
 515
 516           SKIP: {
 517               skip "skipping dhe512 test", 1
 518                   if ($no_dh);
 519
 520               is(run(test([@ssltest,
 521                            "-s_cipher", "EDH",
 522                            "-c_cipher", 'EDH:@SECLEVEL=1',
 523                            "-dhe512",
 524                            $protocol])), 0,
 525                  "testing connection with weak DH, expecting failure");
 526             }
 527         }
 528     };
 529
 530     subtest 'SSL security level failure tests' => sub {
 531         ######################################################################
 532         plan tests => 3;
 533
 534       SKIP: {
 535           skip "SSLv3 is not supported by this OpenSSL build", 1
 536               if disabled("ssl3");
 537
 538           skip "SSLv3 is not supported by the FIPS provider", 1
 539               if $provider eq "fips";
 540
 541           is(run(test([@ssltest, "-bio_pair", "-ssl3", "-cipher", '@SECLEVEL=1'])),
 542              0, "test sslv3 fails at security level 1, expecting failure");
 543         }
 544
 545       SKIP: {
 546           skip "TLSv1.0 is not supported by this OpenSSL build", 1
 547               if $no_tls1;
 548
 549           skip "TLSv1.0 is not supported by the FIPS provider", 1
 550               if $provider eq "fips";
 551
 552           is(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", '@SECLEVEL=1'])),
 553              0, 'test tls1 fails at security level 1, expecting failure');
 554         }
 555
 556       SKIP: {
 557           skip "TLSv1.1 is not supported by this OpenSSL build", 1
 558               if $no_tls1_1;
 559
 560           skip "TLSv1.1 is not supported by the FIPS provider", 1
 561               if $provider eq "fips";
 562
 563           is(run(test([@ssltest, "-bio_pair", "-tls1_1", "-cipher", '@SECLEVEL=1'])),
 564              0, 'test tls1.1 fails at security level 1, expecting failure');
 565         }
 566     };
 567
 568     subtest 'RSA/(EC)DHE/PSK tests' => sub {
 569         ######################################################################
 570
 571         plan tests => 10;
 572
 573       SKIP: {
 574             skip "TLSv1.0 is not supported by this OpenSSL build", 6
 575                 if $no_tls1 || $provider eq "fips";
 576
 577         SKIP: {
 578             skip "skipping anonymous DH tests", 1
 579                 if ($no_dh);
 580
 581             ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time"])),
 582                'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
 583           }
 584
 585         SKIP: {
 586             skip "skipping RSA tests", 2
 587                 if $no_rsa;
 588
 589             ok(run(test(["ssl_old_test", "-provider", "default", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time"])),
 590                'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
 591
 592             skip "skipping RSA+DHE tests", 1
 593                 if $no_dh;
 594
 595             ok(run(test(["ssl_old_test", "-provider", "default", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time"])),
 596                'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
 597           }
 598
 599         SKIP: {
 600             skip "skipping PSK tests", 2
 601                 if ($no_psk);
 602
 603             ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
 604                'test tls1 with PSK');
 605
 606             ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
 607                'test tls1 with PSK via BIO pair');
 608           }
 609
 610         SKIP: {
 611             skip "skipping auto DH PSK tests", 1
 612                 if ($no_dh || $no_psk);
 613
 614             ok(run(test(['ssl_old_test', '-psk', '0102030405', '-cipher', '@SECLEVEL=2:DHE-PSK-AES128-CCM'])),
 615                'test auto DH meets security strength');
 616           }
 617         }
 618
 619       SKIP: {
 620             skip "TLSv1.2 is not supported by this OpenSSL build", 4
 621                 if $no_tls1_2;
 622
 623         SKIP: {
 624             skip "skipping auto DHE PSK test at SECLEVEL 3", 1
 625                 if ($no_dh || $no_psk);
 626
 627             ok(run(test(['ssl_old_test', '-tls1_2', '-dhe4096', '-psk', '0102030405', '-cipher', '@SECLEVEL=3:DHE-PSK-AES256-CBC-SHA384'])),
 628                'test auto DHE PSK meets security strength');
 629           }
 630
 631         SKIP: {
 632             skip "skipping auto ECDHE PSK test at SECLEVEL 3", 1
 633                 if ($no_ec || $no_psk);
 634
 635             ok(run(test(['ssl_old_test', '-tls1_2', '-no_dhe', '-psk', '0102030405', '-cipher', '@SECLEVEL=3:ECDHE-PSK-AES256-CBC-SHA384'])),
 636                'test auto ECDHE PSK meets security strength');
 637           }
 638
 639         SKIP: {
 640             skip "skipping no RSA PSK at SECLEVEL 3 test", 1
 641                 if ($no_rsa || $no_psk);
 642
 643             ok(!run(test(['ssl_old_test', '-tls1_2', '-no_dhe', '-psk', '0102030405', '-cipher', '@SECLEVEL=3:RSA-PSK-AES256-CBC-SHA384'])),
 644                'test auto RSA PSK does not meet security level 3 requirements (PFS)');
 645           }
 646
 647         SKIP: {
 648             skip "skipping no PSK at SECLEVEL 3 test", 1
 649                 if ($no_psk);
 650
 651             ok(!run(test(['ssl_old_test', '-tls1_2', '-no_dhe', '-psk', '0102030405', '-cipher', '@SECLEVEL=3:PSK-AES256-CBC-SHA384'])),
 652                'test auto PSK does not meet security level 3 requirements (PFS)');
 653           }
 654         }
 655
 656     };
 657
 658     subtest 'Custom Extension tests' => sub {
 659         ######################################################################
 660
 661         plan tests => 1;
 662
 663       SKIP: {
 664           skip "TLSv1.0 is not supported by this OpenSSL build", 1
 665               if $no_tls1 || $provider eq "fips";
 666
 667           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
 668              'test tls1 with custom extensions');
 669         }
 670     };
 671
 672     subtest 'Serverinfo tests' => sub {
 673         ######################################################################
 674
 675         plan tests => 5;
 676
 677       SKIP: {
 678           skip "TLSv1.0 is not supported by this OpenSSL build", 5
 679               if $no_tls1 || $provider eq "fips";
 680
 681           note('echo test tls1 with serverinfo');
 682           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
 683           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));
 684           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));
 685           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
 686           ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
 687         }
 688     };
 689 }