test/recipes/25-test_req.t

   1 #! /usr/bin/env perl
   2 # Copyright 2015-2024 The OpenSSL Project Authors. All Rights Reserved.
   3 #
   4 # Licensed under the Apache License 2.0 (the "License").  You may not use
   5 # this file except in compliance with the License.  You can obtain a copy
   6 # in the file LICENSE in the source distribution or at
   7 # https://www.openssl.org/source/license.html
   8
   9
  10 use strict;
  11 use warnings;
  12
  13 use OpenSSL::Test::Utils;
  14 use OpenSSL::Test qw/:DEFAULT srctop_file/;
  15
  16 setup("test_req");
  17
  18 plan tests => 108;
  19
  20 require_ok(srctop_file('test', 'recipes', 'tconversion.pl'));
  21
  22 my @certs = qw(test certs);
  23
  24 # What type of key to generate?
  25 my @req_new;
  26 if (disabled("rsa")) {
  27     @req_new = ("-newkey", "dsa:".srctop_file("apps", "dsa512.pem"));
  28 } else {
  29     @req_new = ("-new");
  30     note("There should be a 2 sequences of .'s and some +'s.");
  31     note("There should not be more that at most 80 per line");
  32 }
  33
  34 # Prevent MSys2 filename munging for arguments that look like file paths but
  35 # aren't
  36 $ENV{MSYS2_ARG_CONV_EXCL} = "/CN=";
  37
  38 # Check for duplicate -addext parameters, and one "working" case.
  39 my @addext_args = ( "openssl", "req", "-new", "-out", "testreq.pem",
  40                     "-key",  srctop_file(@certs, "ee-key.pem"),
  41     "-config", srctop_file("test", "test.cnf"), @req_new );
  42 my $val = "subjectAltName=DNS:example.com";
  43 my $val1 = "subjectAltName=otherName:1.2.3.4;UTF8:test,email:info\@example.com";
  44 my $val2 = " " . $val;
  45 my $val3 = $val;
  46 $val3 =~ s/=/    =/;
  47 ok( run(app([@addext_args, "-addext", $val])));
  48 ok( run(app([@addext_args, "-addext", $val1])));
  49 $val1 =~ s/UTF8/XXXX/; # execute the error handling in do_othername
  50 ok(!run(app([@addext_args, "-addext", $val1])));
  51 ok(!run(app([@addext_args, "-addext", $val, "-addext", $val])));
  52 ok(!run(app([@addext_args, "-addext", $val, "-addext", $val2])));
  53 ok(!run(app([@addext_args, "-addext", $val, "-addext", $val3])));
  54 ok(!run(app([@addext_args, "-addext", $val2, "-addext", $val3])));
  55 ok(run(app([@addext_args, "-addext", "SXNetID=1:one, 2:two, 3:three"])));
  56 ok(run(app([@addext_args, "-addext", "subjectAltName=dirName:dirname_sec"])));
  57
  58 # If a CSR is provided with neither of -key or -CA/-CAkey, this should fail.
  59 ok(!run(app(["openssl", "req", "-x509",
  60                 "-in", srctop_file(@certs, "x509-check.csr"),
  61                 "-out", "testreq.pem"])));
  62
  63 subtest "generating alt certificate requests with RSA" => sub {
  64     plan tests => 3;
  65
  66     SKIP: {
  67         skip "RSA is not supported by this OpenSSL build", 2
  68             if disabled("rsa");
  69
  70         ok(run(app(["openssl", "req",
  71                     "-config", srctop_file("test", "test.cnf"),
  72                     "-section", "altreq",
  73                     "-new", "-out", "testreq-rsa.pem", "-utf8",
  74                     "-key", srctop_file("test", "testrsa.pem")])),
  75            "Generating request");
  76
  77         ok(run(app(["openssl", "req",
  78                     "-config", srctop_file("test", "test.cnf"),
  79                     "-verify", "-in", "testreq-rsa.pem", "-noout"])),
  80            "Verifying signature on request");
  81
  82         ok(run(app(["openssl", "req",
  83                     "-config", srctop_file("test", "test.cnf"),
  84                     "-section", "altreq",
  85                     "-verify", "-in", "testreq-rsa.pem", "-noout"])),
  86            "Verifying signature on request");
  87     }
  88 };
  89
  90
  91 subtest "generating certificate requests with RSA" => sub {
  92     plan tests => 8;
  93
  94     SKIP: {
  95         skip "RSA is not supported by this OpenSSL build", 2
  96             if disabled("rsa");
  97
  98         ok(!run(app(["openssl", "req",
  99                      "-config", srctop_file("test", "test.cnf"),
 100                      "-new", "-out", "testreq-rsa.pem", "-utf8",
 101                      "-key", srctop_file("test", "testrsa.pem"),
 102                      "-keyform", "DER"])),
 103            "Checking that mismatching keyform fails");
 104
 105         ok(run(app(["openssl", "req",
 106                     "-config", srctop_file("test", "test.cnf"),
 107                     "-new", "-out", "testreq-rsa.pem", "-utf8",
 108                     "-key", srctop_file("test", "testrsa.pem"),
 109                     "-keyform", "PEM"])),
 110            "Generating request");
 111
 112         ok(run(app(["openssl", "req",
 113                     "-config", srctop_file("test", "test.cnf"),
 114                     "-verify", "-in", "testreq-rsa.pem", "-noout"])),
 115            "Verifying signature on request");
 116
 117         ok(run(app(["openssl", "req",
 118                     "-config", srctop_file("test", "test.cnf"),
 119                     "-modulus", "-in", "testreq-rsa.pem", "-noout"])),
 120            "Printing a modulus of the request key");
 121
 122         ok(run(app(["openssl", "req",
 123                     "-config", srctop_file("test", "test.cnf"),
 124                     "-new", "-out", "testreq_withattrs_pem.pem", "-utf8",
 125                     "-key", srctop_file("test", "testrsa_withattrs.pem")])),
 126            "Generating request from a key with extra attributes - PEM");
 127
 128         ok(run(app(["openssl", "req",
 129                     "-config", srctop_file("test", "test.cnf"),
 130                     "-verify", "-in", "testreq_withattrs_pem.pem", "-noout"])),
 131            "Verifying signature on request from a key with extra attributes - PEM");
 132
 133         ok(run(app(["openssl", "req",
 134                     "-config", srctop_file("test", "test.cnf"),
 135                     "-new", "-out", "testreq_withattrs_der.pem", "-utf8",
 136                     "-key", srctop_file("test", "testrsa_withattrs.der"),
 137                     "-keyform", "DER"])),
 138            "Generating request from a key with extra attributes - PEM");
 139
 140         ok(run(app(["openssl", "req",
 141                     "-config", srctop_file("test", "test.cnf"),
 142                     "-verify", "-in", "testreq_withattrs_der.pem", "-noout"])),
 143            "Verifying signature on request from a key with extra attributes - PEM");
 144     }
 145 };
 146
 147 subtest "generating certificate requests with RSA-PSS" => sub {
 148     plan tests => 12;
 149
 150     SKIP: {
 151         skip "RSA is not supported by this OpenSSL build", 2
 152             if disabled("rsa");
 153
 154         ok(run(app(["openssl", "req",
 155                     "-config", srctop_file("test", "test.cnf"),
 156                     "-new", "-out", "testreq-rsapss.pem", "-utf8",
 157                     "-key", srctop_file("test", "testrsapss.pem")])),
 158            "Generating request");
 159         ok(run(app(["openssl", "req",
 160                     "-config", srctop_file("test", "test.cnf"),
 161                     "-verify", "-in", "testreq-rsapss.pem", "-noout"])),
 162            "Verifying signature on request");
 163
 164         ok(run(app(["openssl", "req",
 165                     "-config", srctop_file("test", "test.cnf"),
 166                     "-new", "-out", "testreq-rsapss2.pem", "-utf8",
 167                     "-sigopt", "rsa_padding_mode:pss",
 168                     "-sigopt", "rsa_pss_saltlen:-1",
 169                     "-key", srctop_file("test", "testrsapss.pem")])),
 170            "Generating request");
 171         ok(run(app(["openssl", "req",
 172                     "-config", srctop_file("test", "test.cnf"),
 173                     "-verify", "-in", "testreq-rsapss2.pem", "-noout"])),
 174            "Verifying signature on request");
 175
 176         ok(run(app(["openssl", "req",
 177                     "-config", srctop_file("test", "test.cnf"),
 178                     "-new", "-out", "testreq-rsapssmand.pem", "-utf8",
 179                     "-sigopt", "rsa_padding_mode:pss",
 180                     "-key", srctop_file("test", "testrsapssmandatory.pem")])),
 181            "Generating request");
 182         ok(run(app(["openssl", "req",
 183                     "-config", srctop_file("test", "test.cnf"),
 184                     "-verify", "-in", "testreq-rsapssmand.pem", "-noout"])),
 185            "Verifying signature on request");
 186
 187         ok(run(app(["openssl", "req",
 188                     "-config", srctop_file("test", "test.cnf"),
 189                     "-new", "-out", "testreq-rsapssmand2.pem", "-utf8",
 190                     "-sigopt", "rsa_pss_saltlen:100",
 191                     "-key", srctop_file("test", "testrsapssmandatory.pem")])),
 192            "Generating request");
 193         ok(run(app(["openssl", "req",
 194                     "-config", srctop_file("test", "test.cnf"),
 195                     "-verify", "-in", "testreq-rsapssmand2.pem", "-noout"])),
 196            "Verifying signature on request");
 197
 198         ok(!run(app(["openssl", "req",
 199                      "-config", srctop_file("test", "test.cnf"),
 200                      "-new", "-out", "testreq-rsapss3.pem", "-utf8",
 201                      "-sigopt", "rsa_padding_mode:pkcs1",
 202                      "-key", srctop_file("test", "testrsapss.pem")])),
 203            "Generating request with expected failure");
 204
 205         ok(!run(app(["openssl", "req",
 206                      "-config", srctop_file("test", "test.cnf"),
 207                      "-new", "-out", "testreq-rsapss3.pem", "-utf8",
 208                      "-sigopt", "rsa_pss_saltlen:-5",
 209                      "-key", srctop_file("test", "testrsapss.pem")])),
 210            "Generating request with expected failure");
 211
 212         ok(!run(app(["openssl", "req",
 213                      "-config", srctop_file("test", "test.cnf"),
 214                      "-new", "-out", "testreq-rsapssmand3.pem", "-utf8",
 215                      "-sigopt", "rsa_pss_saltlen:10",
 216                      "-key", srctop_file("test", "testrsapssmandatory.pem")])),
 217            "Generating request with expected failure");
 218
 219         ok(!run(app(["openssl", "req",
 220                      "-config", srctop_file("test", "test.cnf"),
 221                      "-new", "-out", "testreq-rsapssmand3.pem", "-utf8",
 222                      "-sha256",
 223                      "-key", srctop_file("test", "testrsapssmandatory.pem")])),
 224            "Generating request with expected failure");
 225     }
 226 };
 227
 228 subtest "generating certificate requests with DSA" => sub {
 229     plan tests => 2;
 230
 231     SKIP: {
 232         skip "DSA is not supported by this OpenSSL build", 2
 233             if disabled("dsa");
 234
 235         ok(run(app(["openssl", "req",
 236                     "-config", srctop_file("test", "test.cnf"),
 237                     "-new", "-out", "testreq-dsa.pem", "-utf8",
 238                     "-key", srctop_file("test", "testdsa.pem")])),
 239            "Generating request");
 240
 241         ok(run(app(["openssl", "req",
 242                     "-config", srctop_file("test", "test.cnf"),
 243                     "-verify", "-in", "testreq-dsa.pem", "-noout"])),
 244            "Verifying signature on request");
 245     }
 246 };
 247
 248 subtest "generating certificate requests with ECDSA" => sub {
 249     plan tests => 2;
 250
 251     SKIP: {
 252         skip "ECDSA is not supported by this OpenSSL build", 2
 253             if disabled("ec");
 254
 255         ok(run(app(["openssl", "req",
 256                     "-config", srctop_file("test", "test.cnf"),
 257                     "-new", "-out", "testreq-ec.pem", "-utf8",
 258                     "-key", srctop_file("test", "testec-p256.pem")])),
 259            "Generating request");
 260
 261         ok(run(app(["openssl", "req",
 262                     "-config", srctop_file("test", "test.cnf"),
 263                     "-verify", "-in", "testreq-ec.pem", "-noout"])),
 264            "Verifying signature on request");
 265     }
 266 };
 267
 268 subtest "generating certificate requests with Ed25519" => sub {
 269     plan tests => 2;
 270
 271     SKIP: {
 272         skip "Ed25519 is not supported by this OpenSSL build", 2
 273             if disabled("ecx");
 274
 275         ok(run(app(["openssl", "req",
 276                     "-config", srctop_file("test", "test.cnf"),
 277                     "-new", "-out", "testreq-ed25519.pem", "-utf8",
 278                     "-key", srctop_file("test", "tested25519.pem")])),
 279            "Generating request");
 280
 281         ok(run(app(["openssl", "req",
 282                     "-config", srctop_file("test", "test.cnf"),
 283                     "-verify", "-in", "testreq-ed25519.pem", "-noout"])),
 284            "Verifying signature on request");
 285     }
 286 };
 287
 288 subtest "generating certificate requests with Ed448" => sub {
 289     plan tests => 2;
 290
 291     SKIP: {
 292         skip "Ed448 is not supported by this OpenSSL build", 2
 293             if disabled("ecx");
 294
 295         ok(run(app(["openssl", "req",
 296                     "-config", srctop_file("test", "test.cnf"),
 297                     "-new", "-out", "testreq-ed448.pem", "-utf8",
 298                     "-key", srctop_file("test", "tested448.pem")])),
 299            "Generating request");
 300
 301         ok(run(app(["openssl", "req",
 302                     "-config", srctop_file("test", "test.cnf"),
 303                     "-verify", "-in", "testreq-ed448.pem", "-noout"])),
 304            "Verifying signature on request");
 305     }
 306 };
 307
 308 subtest "generating certificate requests" => sub {
 309     plan tests => 2;
 310
 311     ok(run(app(["openssl", "req", "-config", srctop_file("test", "test.cnf"),
 312                 "-key", srctop_file(@certs, "ee-key.pem"),
 313                 @req_new, "-out", "testreq.pem"])),
 314        "Generating request");
 315
 316     ok(run(app(["openssl", "req", "-config", srctop_file("test", "test.cnf"),
 317                 "-verify", "-in", "testreq.pem", "-noout"])),
 318        "Verifying signature on request");
 319 };
 320
 321 subtest "generating SM2 certificate requests" => sub {
 322     plan tests => 4;
 323
 324     SKIP: {
 325         skip "SM2 is not supported by this OpenSSL build", 4
 326         if disabled("sm2");
 327         ok(run(app(["openssl", "req",
 328                     "-config", srctop_file("test", "test.cnf"),
 329                     "-new", "-key", srctop_file(@certs, "sm2.key"),
 330                     "-sigopt", "distid:1234567812345678",
 331                     "-out", "testreq-sm2.pem", "-sm3"])),
 332            "Generating SM2 certificate request");
 333
 334         ok(run(app(["openssl", "req",
 335                     "-config", srctop_file("test", "test.cnf"),
 336                     "-verify", "-in", "testreq-sm2.pem", "-noout",
 337                     "-vfyopt", "distid:1234567812345678", "-sm3"])),
 338            "Verifying signature on SM2 certificate request");
 339
 340         ok(run(app(["openssl", "req",
 341                     "-config", srctop_file("test", "test.cnf"),
 342                     "-new", "-key", srctop_file(@certs, "sm2.key"),
 343                     "-sigopt", "hexdistid:DEADBEEF",
 344                     "-out", "testreq-sm2.pem", "-sm3"])),
 345            "Generating SM2 certificate request with hex id");
 346
 347         ok(run(app(["openssl", "req",
 348                     "-config", srctop_file("test", "test.cnf"),
 349                     "-verify", "-in", "testreq-sm2.pem", "-noout",
 350                     "-vfyopt", "hexdistid:DEADBEEF", "-sm3"])),
 351            "Verifying signature on SM2 certificate request");
 352     }
 353 };
 354
 355 my @openssl_args = ("req", "-config", srctop_file("apps", "openssl.cnf"));
 356
 357 run_conversion('req conversions',
 358                "testreq.pem");
 359 run_conversion('req conversions -- testreq2',
 360                srctop_file("test", "testreq2.pem"));
 361
 362 sub run_conversion {
 363     my $title = shift;
 364     my $reqfile = shift;
 365
 366     subtest $title => sub {
 367         run(app(["openssl", @openssl_args,
 368                  "-in", $reqfile, "-inform", "p",
 369                  "-noout", "-text"],
 370                 stderr => "req-check.err", stdout => undef));
 371         open DATA, "req-check.err";
 372         SKIP: {
 373             plan skip_all => "skipping req conversion test for $reqfile"
 374                 if grep /Unknown Public Key/, map { s/\R//; } <DATA>;
 375
 376             tconversion( -type => 'req', -in => $reqfile,
 377                          -args => [ @openssl_args ] );
 378         }
 379         close DATA;
 380         unlink "req-check.err";
 381
 382         done_testing();
 383     };
 384 }
 385
 386 # Test both generation and verification of certs w.r.t. RFC 5280 requirements
 387
 388 my $ca_cert; # will be set below
 389 sub generate_cert {
 390     my $cert = shift @_;
 391     my $ss = $cert =~ m/self-signed/;
 392     my $is_ca = $cert =~ m/CA/;
 393     my $cn = $is_ca ? "CA" : "EE";
 394     my $ca_key = srctop_file(@certs, "ca-key.pem");
 395     my $key = $is_ca ? $ca_key : srctop_file(@certs, "ee-key.pem");
 396     my @cmd = ("openssl", "req", "-config", "", "-x509",
 397                "-subj", "/CN=$cn", @_, "-out", $cert);
 398     push(@cmd, ("-key", $key)) if $ss;
 399     push(@cmd, ("-CA", $ca_cert, "-CAkey", $ca_key)) unless $ss;
 400     ok(run(app([@cmd])), "generate $cert");
 401 }
 402
 403 sub has_keyUsage {
 404     my $cert = shift @_;
 405     my $expect = shift @_;
 406     cert_contains($cert, "Key Usage", $expect);
 407 }
 408 sub strict_verify {
 409     my $cert = shift @_;
 410     my $expect = shift @_;
 411     my $trusted = shift @_;
 412     $trusted = $cert unless $trusted;
 413     ok(run(app(["openssl", "verify", "-x509_strict", "-trusted", $trusted,
 414                 "-partial_chain", $cert])) == $expect,
 415        "strict verify allow $cert");
 416 }
 417
 418 my @v3_ca = ("-addext", "basicConstraints = critical,CA:true",
 419              "-addext", "keyUsage = keyCertSign");
 420 my $SKID_AKID = "subjectKeyIdentifier,authorityKeyIdentifier";
 421
 422 # # SKID
 423
 424 my $cert = "self-signed_default_SKID_no_explicit_exts.pem";
 425 generate_cert($cert);
 426 has_version($cert, 3);
 427 has_SKID($cert, 1); # SKID added, though no explicit extensions given
 428 has_AKID($cert, 0);
 429
 430 my $cert = "self-signed_v3_CA_hash_SKID.pem";
 431 generate_cert($cert, @v3_ca, "-addext", "subjectKeyIdentifier = hash");
 432 has_SKID($cert, 1); # explicit hash SKID
 433
 434 $cert = "self-signed_v3_CA_no_SKID.pem";
 435 generate_cert($cert, @v3_ca, "-addext", "subjectKeyIdentifier = none");
 436 cert_ext_has_n_different_lines($cert, 0, $SKID_AKID); # no SKID and no AKID
 437 #TODO strict_verify($cert, 0);
 438
 439 $cert = "self-signed_v3_CA_given_SKID.pem";
 440 generate_cert($cert, @v3_ca, "-addext", "subjectKeyIdentifier = 45");
 441 cert_contains($cert, "Subject Key Identifier: 45 ", 1); # given SKID
 442 strict_verify($cert, 1);
 443
 444 # AKID of self-signed certs
 445
 446 $cert = "self-signed_v1_CA_no_KIDs.pem";
 447 generate_cert($cert, "-x509v1");
 448 has_version($cert, 1);
 449 cert_ext_has_n_different_lines($cert, 0, $SKID_AKID); # no SKID and no AKID
 450 #TODO strict_verify($cert, 1); # self-signed v1 root cert should be accepted as CA
 451
 452 $ca_cert = "self-signed_v3_CA_default_SKID.pem"; # will also be used below
 453 generate_cert($ca_cert, @v3_ca);
 454 has_SKID($ca_cert, 1); # default SKID
 455 has_AKID($ca_cert, 0); # no default AKID
 456 strict_verify($ca_cert, 1);
 457
 458 $cert = "self-signed_v3_CA_no_AKID.pem";
 459 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = none");
 460 has_AKID($cert, 0); # forced no AKID
 461
 462 $cert = "self-signed_v3_CA_explicit_AKID.pem";
 463 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = keyid");
 464 has_AKID($cert, 0); # for self-signed cert, AKID suppressed and not forced
 465
 466 $cert = "self-signed_v3_CA_forced_AKID.pem";
 467 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = keyid:always");
 468 cert_ext_has_n_different_lines($cert, 3, $SKID_AKID); # forced AKID, AKID == SKID
 469 strict_verify($cert, 1);
 470
 471 $cert = "self-signed_v3_CA_issuer_AKID.pem";
 472 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = issuer");
 473 has_AKID($cert, 0); # suppressed AKID since not forced
 474
 475 $cert = "self-signed_v3_CA_forced_issuer_AKID.pem";
 476 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = issuer:always");
 477 cert_contains($cert, "Authority Key Identifier: DirName:/CN=CA serial:", 1); # forced issuer AKID
 478
 479 $cert = "self-signed_v3_CA_nonforced_keyid_issuer_AKID.pem";
 480 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = keyid, issuer");
 481 has_AKID($cert, 0); # AKID not present because not forced and cert self-signed
 482
 483 $cert = "self-signed_v3_CA_keyid_forced_issuer_AKID.pem";
 484 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = keyid, issuer:always");
 485 cert_contains($cert, "Authority Key Identifier: DirName:/CN=CA serial:", 1); # issuer AKID forced, with keyid not forced
 486
 487 $cert = "self-signed_v3_CA_forced_keyid_issuer_AKID.pem";
 488 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = keyid:always, issuer");
 489 has_AKID($cert, 1); # AKID with keyid forced
 490 cert_contains($cert, "Authority Key Identifier: DirName:/CN=CA serial:", 0); # no issuer AKID
 491
 492 $cert = "self-signed_v3_CA_forced_keyid_forced_issuer_AKID.pem";
 493 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = keyid:always, issuer:always");
 494 cert_contains($cert, "Authority Key Identifier: keyid(:[0-9A-Fa-f]{2})+ DirName:/CN=CA serial:", 1); # AKID with keyid and issuer forced
 495
 496 $cert = "self-signed_v3_EE_wrong_keyUsage.pem";
 497 generate_cert($cert, "-addext", "keyUsage = keyCertSign");
 498 #TODO strict_verify($cert, 1); # should be accepted because RFC 5280 does not apply
 499
 500 # AKID of self-issued but not self-signed certs
 501
 502 $cert = "self-issued_x509_v3_CA_default_KIDs.pem";
 503 ok(run(app([("openssl", "x509", "-copy_extensions", "copy",
 504              "-req", "-in", srctop_file(@certs, "ext-check.csr"),
 505              "-key", srctop_file(@certs, "ca-key.pem"),
 506              "-force_pubkey", srctop_file("test", "testrsapub.pem"),
 507              "-out", $cert)])), "generate using x509: $cert");
 508 cert_contains($cert, "Issuer: CN=test .*? Subject: CN=test", 1);
 509 cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID
 510 strict_verify($cert, 1);
 511
 512 $cert = "self-issued_v3_CA_default_KIDs.pem";
 513 generate_cert($cert, "-addext", "keyUsage = dataEncipherment",
 514     "-in", srctop_file(@certs, "x509-check.csr"));
 515 cert_contains($cert, "Issuer: CN=CA .*? Subject: CN=CA", 1);
 516 cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID
 517 strict_verify($cert, 1);
 518
 519 $cert = "self-issued_v3_CA_no_AKID.pem";
 520 generate_cert($cert, "-addext", "authorityKeyIdentifier = none",
 521     "-in", srctop_file(@certs, "x509-check.csr"));
 522 has_version($cert, 3);
 523 has_SKID($cert, 1); # SKID added, though no explicit extensions given
 524 has_AKID($cert, 0);
 525 strict_verify($cert, 1);
 526
 527 $cert = "self-issued_v3_CA_explicit_AKID.pem";
 528 generate_cert($cert, "-addext", "authorityKeyIdentifier = keyid",
 529     "-in", srctop_file(@certs, "x509-check.csr"));
 530 cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID
 531 strict_verify($cert, 1);
 532
 533 $cert = "self-issued_v3_CA_forced_AKID.pem";
 534 generate_cert($cert, "-addext", "authorityKeyIdentifier = keyid:always",
 535     "-in", srctop_file(@certs, "x509-check.csr"));
 536 cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID
 537
 538 $cert = "self-issued_v3_CA_issuer_AKID.pem";
 539 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = issuer",
 540     "-in", srctop_file(@certs, "x509-check.csr"));
 541 cert_contains($cert, "Authority Key Identifier: DirName:/CN=CA serial:", 1); # just issuer AKID
 542
 543 $cert = "self-issued_v3_CA_forced_issuer_AKID.pem";
 544 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = issuer:always",
 545     "-in", srctop_file(@certs, "x509-check.csr"));
 546 cert_contains($cert, "Authority Key Identifier: DirName:/CN=CA serial:", 1); # just issuer AKID
 547
 548 $cert = "self-issued_v3_CA_keyid_issuer_AKID.pem";
 549 generate_cert($cert, "-addext", "authorityKeyIdentifier = keyid, issuer",
 550     "-in", srctop_file(@certs, "x509-check.csr"));
 551 cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID, not forced
 552
 553 $cert = "self-issued_v3_CA_keyid_forced_issuer_AKID.pem";
 554 generate_cert($cert, "-addext", "authorityKeyIdentifier = keyid, issuer:always",
 555     "-in", srctop_file(@certs, "x509-check.csr"));
 556 cert_ext_has_n_different_lines($cert, 6, $SKID_AKID); # SKID != AKID, with forced issuer
 557
 558 $cert = "self-issued_v3_CA_forced_keyid_and_issuer_AKID.pem";
 559 generate_cert($cert, "-addext", "authorityKeyIdentifier = keyid:always, issuer:always",
 560     "-in", srctop_file(@certs, "x509-check.csr"));
 561 cert_ext_has_n_different_lines($cert, 6, $SKID_AKID); # SKID != AKID, both forced
 562
 563 # AKID of not self-issued certs
 564
 565 $cert = "regular_v3_EE_default_KIDs_no_other_exts.pem";
 566 generate_cert($cert, "-key", srctop_file(@certs, "ee-key.pem"));
 567 has_version($cert, 3);
 568 cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID
 569
 570 $cert = "regular_v3_EE_default_KIDs.pem";
 571 generate_cert($cert, "-addext", "keyUsage = dataEncipherment",
 572     "-key", srctop_file(@certs, "ee-key.pem"));
 573 cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID
 574 strict_verify($cert, 1, $ca_cert);
 575
 576 $cert = "regular_v3_EE_copied_exts_default_KIDs.pem";
 577 generate_cert($cert, "-copy_extensions", "copy",
 578               "-in", srctop_file(@certs, "ext-check.csr"));
 579 cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID
 580 strict_verify($cert, 1);
 581
 582 $cert = "v3_EE_no_AKID.pem";
 583 generate_cert($cert, "-addext", "authorityKeyIdentifier = none",
 584     "-key", srctop_file(@certs, "ee-key.pem"));
 585 has_SKID($cert, 1);
 586 has_AKID($cert, 0);
 587 strict_verify($cert, 0, $ca_cert);
 588
 589
 590 # Key Usage
 591
 592 $cert = "self-signed_CA_no_keyUsage.pem";
 593 generate_cert($cert, "-in", srctop_file(@certs, "ext-check.csr"));
 594 has_keyUsage($cert, 0);
 595 $cert = "self-signed_CA_with_keyUsages.pem";
 596 generate_cert($cert, "-in", srctop_file(@certs, "ext-check.csr"),
 597     "-copy_extensions", "copy");
 598 has_keyUsage($cert, 1);
 599
 600 # Generate cert using req with '-modulus'
 601 ok(run(app(["openssl", "req", "-x509", "-new", "-days", "365",
 602             "-key", srctop_file("test", "testrsa.pem"),
 603             "-config", srctop_file('test', 'test.cnf'),
 604             "-out", "testreq-cert.pem",
 605             "-modulus"])), "cert req creation - with -modulus");
 606
 607 # Verify cert
 608 ok(run(app(["openssl", "x509", "-in", "testreq-cert.pem",
 609             "-noout", "-text"])), "cert verification");