test/recipes/25-test_req.t

   1 #! /usr/bin/env perl
   2 # Copyright 2015-2023 The OpenSSL Project Authors. All Rights Reserved.
   3 #
   4 # Licensed under the Apache License 2.0 (the "License").  You may not use
   5 # this file except in compliance with the License.  You can obtain a copy
   6 # in the file LICENSE in the source distribution or at
   7 # https://www.openssl.org/source/license.html
   8
   9
  10 use strict;
  11 use warnings;
  12
  13 use OpenSSL::Test::Utils;
  14 use OpenSSL::Test qw/:DEFAULT srctop_file/;
  15
  16 setup("test_req");
  17
  18 plan tests => 104;
  19
  20 require_ok(srctop_file('test', 'recipes', 'tconversion.pl'));
  21
  22 my @certs = qw(test certs);
  23
  24 # What type of key to generate?
  25 my @req_new;
  26 if (disabled("rsa")) {
  27     @req_new = ("-newkey", "dsa:".srctop_file("apps", "dsa512.pem"));
  28 } else {
  29     @req_new = ("-new");
  30     note("There should be a 2 sequences of .'s and some +'s.");
  31     note("There should not be more that at most 80 per line");
  32 }
  33
  34 # Prevent MSys2 filename munging for arguments that look like file paths but
  35 # aren't
  36 $ENV{MSYS2_ARG_CONV_EXCL} = "/CN=";
  37
  38 # Check for duplicate -addext parameters, and one "working" case.
  39 my @addext_args = ( "openssl", "req", "-new", "-out", "testreq.pem",
  40                     "-key",  srctop_file(@certs, "ee-key.pem"),
  41     "-config", srctop_file("test", "test.cnf"), @req_new );
  42 my $val = "subjectAltName=DNS:example.com";
  43 my $val2 = " " . $val;
  44 my $val3 = $val;
  45 $val3 =~ s/=/    =/;
  46 ok( run(app([@addext_args, "-addext", $val])));
  47 ok(!run(app([@addext_args, "-addext", $val, "-addext", $val])));
  48 ok(!run(app([@addext_args, "-addext", $val, "-addext", $val2])));
  49 ok(!run(app([@addext_args, "-addext", $val, "-addext", $val3])));
  50 ok(!run(app([@addext_args, "-addext", $val2, "-addext", $val3])));
  51
  52 # If a CSR is provided with neither of -key or -CA/-CAkey, this should fail.
  53 ok(!run(app(["openssl", "req", "-x509",
  54                 "-in", srctop_file(@certs, "x509-check.csr"),
  55                 "-out", "testreq.pem"])));
  56
  57 subtest "generating alt certificate requests with RSA" => sub {
  58     plan tests => 3;
  59
  60     SKIP: {
  61         skip "RSA is not supported by this OpenSSL build", 2
  62             if disabled("rsa");
  63
  64         ok(run(app(["openssl", "req",
  65                     "-config", srctop_file("test", "test.cnf"),
  66                     "-section", "altreq",
  67                     "-new", "-out", "testreq-rsa.pem", "-utf8",
  68                     "-key", srctop_file("test", "testrsa.pem")])),
  69            "Generating request");
  70
  71         ok(run(app(["openssl", "req",
  72                     "-config", srctop_file("test", "test.cnf"),
  73                     "-verify", "-in", "testreq-rsa.pem", "-noout"])),
  74            "Verifying signature on request");
  75
  76         ok(run(app(["openssl", "req",
  77                     "-config", srctop_file("test", "test.cnf"),
  78                     "-section", "altreq",
  79                     "-verify", "-in", "testreq-rsa.pem", "-noout"])),
  80            "Verifying signature on request");
  81     }
  82 };
  83
  84
  85 subtest "generating certificate requests with RSA" => sub {
  86     plan tests => 8;
  87
  88     SKIP: {
  89         skip "RSA is not supported by this OpenSSL build", 2
  90             if disabled("rsa");
  91
  92         ok(!run(app(["openssl", "req",
  93                      "-config", srctop_file("test", "test.cnf"),
  94                      "-new", "-out", "testreq-rsa.pem", "-utf8",
  95                      "-key", srctop_file("test", "testrsa.pem"),
  96                      "-keyform", "DER"])),
  97            "Checking that mismatching keyform fails");
  98
  99         ok(run(app(["openssl", "req",
 100                     "-config", srctop_file("test", "test.cnf"),
 101                     "-new", "-out", "testreq-rsa.pem", "-utf8",
 102                     "-key", srctop_file("test", "testrsa.pem"),
 103                     "-keyform", "PEM"])),
 104            "Generating request");
 105
 106         ok(run(app(["openssl", "req",
 107                     "-config", srctop_file("test", "test.cnf"),
 108                     "-verify", "-in", "testreq-rsa.pem", "-noout"])),
 109            "Verifying signature on request");
 110
 111         ok(run(app(["openssl", "req",
 112                     "-config", srctop_file("test", "test.cnf"),
 113                     "-modulus", "-in", "testreq-rsa.pem", "-noout"])),
 114            "Printing a modulus of the request key");
 115
 116         ok(run(app(["openssl", "req",
 117                     "-config", srctop_file("test", "test.cnf"),
 118                     "-new", "-out", "testreq_withattrs_pem.pem", "-utf8",
 119                     "-key", srctop_file("test", "testrsa_withattrs.pem")])),
 120            "Generating request from a key with extra attributes - PEM");
 121
 122         ok(run(app(["openssl", "req",
 123                     "-config", srctop_file("test", "test.cnf"),
 124                     "-verify", "-in", "testreq_withattrs_pem.pem", "-noout"])),
 125            "Verifying signature on request from a key with extra attributes - PEM");
 126
 127         ok(run(app(["openssl", "req",
 128                     "-config", srctop_file("test", "test.cnf"),
 129                     "-new", "-out", "testreq_withattrs_der.pem", "-utf8",
 130                     "-key", srctop_file("test", "testrsa_withattrs.der"),
 131                     "-keyform", "DER"])),
 132            "Generating request from a key with extra attributes - PEM");
 133
 134         ok(run(app(["openssl", "req",
 135                     "-config", srctop_file("test", "test.cnf"),
 136                     "-verify", "-in", "testreq_withattrs_der.pem", "-noout"])),
 137            "Verifying signature on request from a key with extra attributes - PEM");
 138     }
 139 };
 140
 141 subtest "generating certificate requests with RSA-PSS" => sub {
 142     plan tests => 12;
 143
 144     SKIP: {
 145         skip "RSA is not supported by this OpenSSL build", 2
 146             if disabled("rsa");
 147
 148         ok(run(app(["openssl", "req",
 149                     "-config", srctop_file("test", "test.cnf"),
 150                     "-new", "-out", "testreq-rsapss.pem", "-utf8",
 151                     "-key", srctop_file("test", "testrsapss.pem")])),
 152            "Generating request");
 153         ok(run(app(["openssl", "req",
 154                     "-config", srctop_file("test", "test.cnf"),
 155                     "-verify", "-in", "testreq-rsapss.pem", "-noout"])),
 156            "Verifying signature on request");
 157
 158         ok(run(app(["openssl", "req",
 159                     "-config", srctop_file("test", "test.cnf"),
 160                     "-new", "-out", "testreq-rsapss2.pem", "-utf8",
 161                     "-sigopt", "rsa_padding_mode:pss",
 162                     "-sigopt", "rsa_pss_saltlen:-1",
 163                     "-key", srctop_file("test", "testrsapss.pem")])),
 164            "Generating request");
 165         ok(run(app(["openssl", "req",
 166                     "-config", srctop_file("test", "test.cnf"),
 167                     "-verify", "-in", "testreq-rsapss2.pem", "-noout"])),
 168            "Verifying signature on request");
 169
 170         ok(run(app(["openssl", "req",
 171                     "-config", srctop_file("test", "test.cnf"),
 172                     "-new", "-out", "testreq-rsapssmand.pem", "-utf8",
 173                     "-sigopt", "rsa_padding_mode:pss",
 174                     "-key", srctop_file("test", "testrsapssmandatory.pem")])),
 175            "Generating request");
 176         ok(run(app(["openssl", "req",
 177                     "-config", srctop_file("test", "test.cnf"),
 178                     "-verify", "-in", "testreq-rsapssmand.pem", "-noout"])),
 179            "Verifying signature on request");
 180
 181         ok(run(app(["openssl", "req",
 182                     "-config", srctop_file("test", "test.cnf"),
 183                     "-new", "-out", "testreq-rsapssmand2.pem", "-utf8",
 184                     "-sigopt", "rsa_pss_saltlen:100",
 185                     "-key", srctop_file("test", "testrsapssmandatory.pem")])),
 186            "Generating request");
 187         ok(run(app(["openssl", "req",
 188                     "-config", srctop_file("test", "test.cnf"),
 189                     "-verify", "-in", "testreq-rsapssmand2.pem", "-noout"])),
 190            "Verifying signature on request");
 191
 192         ok(!run(app(["openssl", "req",
 193                      "-config", srctop_file("test", "test.cnf"),
 194                      "-new", "-out", "testreq-rsapss3.pem", "-utf8",
 195                      "-sigopt", "rsa_padding_mode:pkcs1",
 196                      "-key", srctop_file("test", "testrsapss.pem")])),
 197            "Generating request with expected failure");
 198
 199         ok(!run(app(["openssl", "req",
 200                      "-config", srctop_file("test", "test.cnf"),
 201                      "-new", "-out", "testreq-rsapss3.pem", "-utf8",
 202                      "-sigopt", "rsa_pss_saltlen:-5",
 203                      "-key", srctop_file("test", "testrsapss.pem")])),
 204            "Generating request with expected failure");
 205
 206         ok(!run(app(["openssl", "req",
 207                      "-config", srctop_file("test", "test.cnf"),
 208                      "-new", "-out", "testreq-rsapssmand3.pem", "-utf8",
 209                      "-sigopt", "rsa_pss_saltlen:10",
 210                      "-key", srctop_file("test", "testrsapssmandatory.pem")])),
 211            "Generating request with expected failure");
 212
 213         ok(!run(app(["openssl", "req",
 214                      "-config", srctop_file("test", "test.cnf"),
 215                      "-new", "-out", "testreq-rsapssmand3.pem", "-utf8",
 216                      "-sha256",
 217                      "-key", srctop_file("test", "testrsapssmandatory.pem")])),
 218            "Generating request with expected failure");
 219     }
 220 };
 221
 222 subtest "generating certificate requests with DSA" => sub {
 223     plan tests => 2;
 224
 225     SKIP: {
 226         skip "DSA is not supported by this OpenSSL build", 2
 227             if disabled("dsa");
 228
 229         ok(run(app(["openssl", "req",
 230                     "-config", srctop_file("test", "test.cnf"),
 231                     "-new", "-out", "testreq-dsa.pem", "-utf8",
 232                     "-key", srctop_file("test", "testdsa.pem")])),
 233            "Generating request");
 234
 235         ok(run(app(["openssl", "req",
 236                     "-config", srctop_file("test", "test.cnf"),
 237                     "-verify", "-in", "testreq-dsa.pem", "-noout"])),
 238            "Verifying signature on request");
 239     }
 240 };
 241
 242 subtest "generating certificate requests with ECDSA" => sub {
 243     plan tests => 2;
 244
 245     SKIP: {
 246         skip "ECDSA is not supported by this OpenSSL build", 2
 247             if disabled("ec");
 248
 249         ok(run(app(["openssl", "req",
 250                     "-config", srctop_file("test", "test.cnf"),
 251                     "-new", "-out", "testreq-ec.pem", "-utf8",
 252                     "-key", srctop_file("test", "testec-p256.pem")])),
 253            "Generating request");
 254
 255         ok(run(app(["openssl", "req",
 256                     "-config", srctop_file("test", "test.cnf"),
 257                     "-verify", "-in", "testreq-ec.pem", "-noout"])),
 258            "Verifying signature on request");
 259     }
 260 };
 261
 262 subtest "generating certificate requests with Ed25519" => sub {
 263     plan tests => 2;
 264
 265     SKIP: {
 266         skip "Ed25519 is not supported by this OpenSSL build", 2
 267             if disabled("ecx");
 268
 269         ok(run(app(["openssl", "req",
 270                     "-config", srctop_file("test", "test.cnf"),
 271                     "-new", "-out", "testreq-ed25519.pem", "-utf8",
 272                     "-key", srctop_file("test", "tested25519.pem")])),
 273            "Generating request");
 274
 275         ok(run(app(["openssl", "req",
 276                     "-config", srctop_file("test", "test.cnf"),
 277                     "-verify", "-in", "testreq-ed25519.pem", "-noout"])),
 278            "Verifying signature on request");
 279     }
 280 };
 281
 282 subtest "generating certificate requests with Ed448" => sub {
 283     plan tests => 2;
 284
 285     SKIP: {
 286         skip "Ed448 is not supported by this OpenSSL build", 2
 287             if disabled("ecx");
 288
 289         ok(run(app(["openssl", "req",
 290                     "-config", srctop_file("test", "test.cnf"),
 291                     "-new", "-out", "testreq-ed448.pem", "-utf8",
 292                     "-key", srctop_file("test", "tested448.pem")])),
 293            "Generating request");
 294
 295         ok(run(app(["openssl", "req",
 296                     "-config", srctop_file("test", "test.cnf"),
 297                     "-verify", "-in", "testreq-ed448.pem", "-noout"])),
 298            "Verifying signature on request");
 299     }
 300 };
 301
 302 subtest "generating certificate requests" => sub {
 303     plan tests => 2;
 304
 305     ok(run(app(["openssl", "req", "-config", srctop_file("test", "test.cnf"),
 306                 "-key", srctop_file(@certs, "ee-key.pem"),
 307                 @req_new, "-out", "testreq.pem"])),
 308        "Generating request");
 309
 310     ok(run(app(["openssl", "req", "-config", srctop_file("test", "test.cnf"),
 311                 "-verify", "-in", "testreq.pem", "-noout"])),
 312        "Verifying signature on request");
 313 };
 314
 315 subtest "generating SM2 certificate requests" => sub {
 316     plan tests => 4;
 317
 318     SKIP: {
 319         skip "SM2 is not supported by this OpenSSL build", 4
 320         if disabled("sm2");
 321         ok(run(app(["openssl", "req",
 322                     "-config", srctop_file("test", "test.cnf"),
 323                     "-new", "-key", srctop_file(@certs, "sm2.key"),
 324                     "-sigopt", "distid:1234567812345678",
 325                     "-out", "testreq-sm2.pem", "-sm3"])),
 326            "Generating SM2 certificate request");
 327
 328         ok(run(app(["openssl", "req",
 329                     "-config", srctop_file("test", "test.cnf"),
 330                     "-verify", "-in", "testreq-sm2.pem", "-noout",
 331                     "-vfyopt", "distid:1234567812345678", "-sm3"])),
 332            "Verifying signature on SM2 certificate request");
 333
 334         ok(run(app(["openssl", "req",
 335                     "-config", srctop_file("test", "test.cnf"),
 336                     "-new", "-key", srctop_file(@certs, "sm2.key"),
 337                     "-sigopt", "hexdistid:DEADBEEF",
 338                     "-out", "testreq-sm2.pem", "-sm3"])),
 339            "Generating SM2 certificate request with hex id");
 340
 341         ok(run(app(["openssl", "req",
 342                     "-config", srctop_file("test", "test.cnf"),
 343                     "-verify", "-in", "testreq-sm2.pem", "-noout",
 344                     "-vfyopt", "hexdistid:DEADBEEF", "-sm3"])),
 345            "Verifying signature on SM2 certificate request");
 346     }
 347 };
 348
 349 my @openssl_args = ("req", "-config", srctop_file("apps", "openssl.cnf"));
 350
 351 run_conversion('req conversions',
 352                "testreq.pem");
 353 run_conversion('req conversions -- testreq2',
 354                srctop_file("test", "testreq2.pem"));
 355
 356 sub run_conversion {
 357     my $title = shift;
 358     my $reqfile = shift;
 359
 360     subtest $title => sub {
 361         run(app(["openssl", @openssl_args,
 362                  "-in", $reqfile, "-inform", "p",
 363                  "-noout", "-text"],
 364                 stderr => "req-check.err", stdout => undef));
 365         open DATA, "req-check.err";
 366         SKIP: {
 367             plan skip_all => "skipping req conversion test for $reqfile"
 368                 if grep /Unknown Public Key/, map { s/\R//; } <DATA>;
 369
 370             tconversion( -type => 'req', -in => $reqfile,
 371                          -args => [ @openssl_args ] );
 372         }
 373         close DATA;
 374         unlink "req-check.err";
 375
 376         done_testing();
 377     };
 378 }
 379
 380 # Test both generation and verification of certs w.r.t. RFC 5280 requirements
 381
 382 my $ca_cert; # will be set below
 383 sub generate_cert {
 384     my $cert = shift @_;
 385     my $ss = $cert =~ m/self-signed/;
 386     my $is_ca = $cert =~ m/CA/;
 387     my $cn = $is_ca ? "CA" : "EE";
 388     my $ca_key = srctop_file(@certs, "ca-key.pem");
 389     my $key = $is_ca ? $ca_key : srctop_file(@certs, "ee-key.pem");
 390     my @cmd = ("openssl", "req", "-config", "", "-x509",
 391                "-subj", "/CN=$cn", @_, "-out", $cert);
 392     push(@cmd, ("-key", $key)) if $ss;
 393     push(@cmd, ("-CA", $ca_cert, "-CAkey", $ca_key)) unless $ss;
 394     ok(run(app([@cmd])), "generate $cert");
 395 }
 396
 397 sub has_keyUsage {
 398     my $cert = shift @_;
 399     my $expect = shift @_;
 400     cert_contains($cert, "Key Usage", $expect);
 401 }
 402 sub strict_verify {
 403     my $cert = shift @_;
 404     my $expect = shift @_;
 405     my $trusted = shift @_;
 406     $trusted = $cert unless $trusted;
 407     ok(run(app(["openssl", "verify", "-x509_strict", "-trusted", $trusted,
 408                 "-partial_chain", $cert])) == $expect,
 409        "strict verify allow $cert");
 410 }
 411
 412 my @v3_ca = ("-addext", "basicConstraints = critical,CA:true",
 413              "-addext", "keyUsage = keyCertSign");
 414 my $SKID_AKID = "subjectKeyIdentifier,authorityKeyIdentifier";
 415
 416 # # SKID
 417
 418 my $cert = "self-signed_default_SKID_no_explicit_exts.pem";
 419 generate_cert($cert);
 420 has_version($cert, 3);
 421 has_SKID($cert, 1); # SKID added, though no explicit extensions given
 422 has_AKID($cert, 0);
 423
 424 my $cert = "self-signed_v3_CA_hash_SKID.pem";
 425 generate_cert($cert, @v3_ca, "-addext", "subjectKeyIdentifier = hash");
 426 has_SKID($cert, 1); # explicit hash SKID
 427
 428 $cert = "self-signed_v3_CA_no_SKID.pem";
 429 generate_cert($cert, @v3_ca, "-addext", "subjectKeyIdentifier = none");
 430 cert_ext_has_n_different_lines($cert, 0, $SKID_AKID); # no SKID and no AKID
 431 #TODO strict_verify($cert, 0);
 432
 433 $cert = "self-signed_v3_CA_given_SKID.pem";
 434 generate_cert($cert, @v3_ca, "-addext", "subjectKeyIdentifier = 45");
 435 cert_contains($cert, "Subject Key Identifier: 45 ", 1); # given SKID
 436 strict_verify($cert, 1);
 437
 438 # AKID of self-signed certs
 439
 440 $cert = "self-signed_v1_CA_no_KIDs.pem";
 441 generate_cert($cert, "-x509v1");
 442 has_version($cert, 1);
 443 cert_ext_has_n_different_lines($cert, 0, $SKID_AKID); # no SKID and no AKID
 444 #TODO strict_verify($cert, 1); # self-signed v1 root cert should be accepted as CA
 445
 446 $ca_cert = "self-signed_v3_CA_default_SKID.pem"; # will also be used below
 447 generate_cert($ca_cert, @v3_ca);
 448 has_SKID($ca_cert, 1); # default SKID
 449 has_AKID($ca_cert, 0); # no default AKID
 450 strict_verify($ca_cert, 1);
 451
 452 $cert = "self-signed_v3_CA_no_AKID.pem";
 453 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = none");
 454 has_AKID($cert, 0); # forced no AKID
 455
 456 $cert = "self-signed_v3_CA_explicit_AKID.pem";
 457 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = keyid");
 458 has_AKID($cert, 0); # for self-signed cert, AKID suppressed and not forced
 459
 460 $cert = "self-signed_v3_CA_forced_AKID.pem";
 461 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = keyid:always");
 462 cert_ext_has_n_different_lines($cert, 3, $SKID_AKID); # forced AKID, AKID == SKID
 463 strict_verify($cert, 1);
 464
 465 $cert = "self-signed_v3_CA_issuer_AKID.pem";
 466 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = issuer");
 467 has_AKID($cert, 0); # suppressed AKID since not forced
 468
 469 $cert = "self-signed_v3_CA_forced_issuer_AKID.pem";
 470 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = issuer:always");
 471 cert_contains($cert, "Authority Key Identifier: DirName:/CN=CA serial:", 1); # forced issuer AKID
 472
 473 $cert = "self-signed_v3_CA_nonforced_keyid_issuer_AKID.pem";
 474 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = keyid, issuer");
 475 has_AKID($cert, 0); # AKID not present because not forced and cert self-signed
 476
 477 $cert = "self-signed_v3_CA_keyid_forced_issuer_AKID.pem";
 478 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = keyid, issuer:always");
 479 cert_contains($cert, "Authority Key Identifier: DirName:/CN=CA serial:", 1); # issuer AKID forced, with keyid not forced
 480
 481 $cert = "self-signed_v3_CA_forced_keyid_issuer_AKID.pem";
 482 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = keyid:always, issuer");
 483 has_AKID($cert, 1); # AKID with keyid forced
 484 cert_contains($cert, "Authority Key Identifier: DirName:/CN=CA serial:", 0); # no issuer AKID
 485
 486 $cert = "self-signed_v3_CA_forced_keyid_forced_issuer_AKID.pem";
 487 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = keyid:always, issuer:always");
 488 cert_contains($cert, "Authority Key Identifier: keyid(:[0-9A-Fa-f]{2})+ DirName:/CN=CA serial:", 1); # AKID with keyid and issuer forced
 489
 490 $cert = "self-signed_v3_EE_wrong_keyUsage.pem";
 491 generate_cert($cert, "-addext", "keyUsage = keyCertSign");
 492 #TODO strict_verify($cert, 1); # should be accepted because RFC 5280 does not apply
 493
 494 # AKID of self-issued but not self-signed certs
 495
 496 $cert = "self-issued_x509_v3_CA_default_KIDs.pem";
 497 ok(run(app([("openssl", "x509", "-copy_extensions", "copy",
 498              "-req", "-in", srctop_file(@certs, "ext-check.csr"),
 499              "-key", srctop_file(@certs, "ca-key.pem"),
 500              "-force_pubkey", srctop_file("test", "testrsapub.pem"),
 501              "-out", $cert)])), "generate using x509: $cert");
 502 cert_contains($cert, "Issuer: CN=test .*? Subject: CN=test", 1);
 503 cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID
 504 strict_verify($cert, 1);
 505
 506 $cert = "self-issued_v3_CA_default_KIDs.pem";
 507 generate_cert($cert, "-addext", "keyUsage = dataEncipherment",
 508     "-in", srctop_file(@certs, "x509-check.csr"));
 509 cert_contains($cert, "Issuer: CN=CA .*? Subject: CN=CA", 1);
 510 cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID
 511 strict_verify($cert, 1);
 512
 513 $cert = "self-issued_v3_CA_no_AKID.pem";
 514 generate_cert($cert, "-addext", "authorityKeyIdentifier = none",
 515     "-in", srctop_file(@certs, "x509-check.csr"));
 516 has_version($cert, 3);
 517 has_SKID($cert, 1); # SKID added, though no explicit extensions given
 518 has_AKID($cert, 0);
 519 strict_verify($cert, 1);
 520
 521 $cert = "self-issued_v3_CA_explicit_AKID.pem";
 522 generate_cert($cert, "-addext", "authorityKeyIdentifier = keyid",
 523     "-in", srctop_file(@certs, "x509-check.csr"));
 524 cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID
 525 strict_verify($cert, 1);
 526
 527 $cert = "self-issued_v3_CA_forced_AKID.pem";
 528 generate_cert($cert, "-addext", "authorityKeyIdentifier = keyid:always",
 529     "-in", srctop_file(@certs, "x509-check.csr"));
 530 cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID
 531
 532 $cert = "self-issued_v3_CA_issuer_AKID.pem";
 533 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = issuer",
 534     "-in", srctop_file(@certs, "x509-check.csr"));
 535 cert_contains($cert, "Authority Key Identifier: DirName:/CN=CA serial:", 1); # just issuer AKID
 536
 537 $cert = "self-issued_v3_CA_forced_issuer_AKID.pem";
 538 generate_cert($cert, @v3_ca, "-addext", "authorityKeyIdentifier = issuer:always",
 539     "-in", srctop_file(@certs, "x509-check.csr"));
 540 cert_contains($cert, "Authority Key Identifier: DirName:/CN=CA serial:", 1); # just issuer AKID
 541
 542 $cert = "self-issued_v3_CA_keyid_issuer_AKID.pem";
 543 generate_cert($cert, "-addext", "authorityKeyIdentifier = keyid, issuer",
 544     "-in", srctop_file(@certs, "x509-check.csr"));
 545 cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID, not forced
 546
 547 $cert = "self-issued_v3_CA_keyid_forced_issuer_AKID.pem";
 548 generate_cert($cert, "-addext", "authorityKeyIdentifier = keyid, issuer:always",
 549     "-in", srctop_file(@certs, "x509-check.csr"));
 550 cert_ext_has_n_different_lines($cert, 6, $SKID_AKID); # SKID != AKID, with forced issuer
 551
 552 $cert = "self-issued_v3_CA_forced_keyid_and_issuer_AKID.pem";
 553 generate_cert($cert, "-addext", "authorityKeyIdentifier = keyid:always, issuer:always",
 554     "-in", srctop_file(@certs, "x509-check.csr"));
 555 cert_ext_has_n_different_lines($cert, 6, $SKID_AKID); # SKID != AKID, both forced
 556
 557 # AKID of not self-issued certs
 558
 559 $cert = "regular_v3_EE_default_KIDs_no_other_exts.pem";
 560 generate_cert($cert, "-key", srctop_file(@certs, "ee-key.pem"));
 561 has_version($cert, 3);
 562 cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID
 563
 564 $cert = "regular_v3_EE_default_KIDs.pem";
 565 generate_cert($cert, "-addext", "keyUsage = dataEncipherment",
 566     "-key", srctop_file(@certs, "ee-key.pem"));
 567 cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID
 568 strict_verify($cert, 1, $ca_cert);
 569
 570 $cert = "regular_v3_EE_copied_exts_default_KIDs.pem";
 571 generate_cert($cert, "-copy_extensions", "copy",
 572               "-in", srctop_file(@certs, "ext-check.csr"));
 573 cert_ext_has_n_different_lines($cert, 4, $SKID_AKID); # SKID != AKID
 574 strict_verify($cert, 1);
 575
 576 $cert = "v3_EE_no_AKID.pem";
 577 generate_cert($cert, "-addext", "authorityKeyIdentifier = none",
 578     "-key", srctop_file(@certs, "ee-key.pem"));
 579 has_SKID($cert, 1);
 580 has_AKID($cert, 0);
 581 strict_verify($cert, 0, $ca_cert);
 582
 583
 584 # Key Usage
 585
 586 $cert = "self-signed_CA_no_keyUsage.pem";
 587 generate_cert($cert, "-in", srctop_file(@certs, "ext-check.csr"));
 588 has_keyUsage($cert, 0);
 589 $cert = "self-signed_CA_with_keyUsages.pem";
 590 generate_cert($cert, "-in", srctop_file(@certs, "ext-check.csr"),
 591     "-copy_extensions", "copy");
 592 has_keyUsage($cert, 1);
 593
 594 # Generate cert using req with '-modulus'
 595 ok(run(app(["openssl", "req", "-x509", "-new", "-days", "365",
 596             "-key", srctop_file("test", "testrsa.pem"),
 597             "-config", srctop_file('test', 'test.cnf'),
 598             "-out", "testreq-cert.pem",
 599             "-modulus"])), "cert req creation - with -modulus");
 600
 601 # Verify cert
 602 ok(run(app(["openssl", "x509", "-in", "testreq-cert.pem",
 603             "-noout", "-text"])), "cert verification");