ssl/d1_pkt.c

   1 /* ssl/d1_pkt.c */
   2 /*
   3  * DTLS implementation written by Nagendra Modadugu
   4  * (nagendra@cs.stanford.edu) for the OpenSSL project 2005.
   5  */
   6 /* ====================================================================
   7  * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
   8  *
   9  * Redistribution and use in source and binary forms, with or without
  10  * modification, are permitted provided that the following conditions
  11  * are met:
  12  *
  13  * 1. Redistributions of source code must retain the above copyright
  14  *    notice, this list of conditions and the following disclaimer.
  15  *
  16  * 2. Redistributions in binary form must reproduce the above copyright
  17  *    notice, this list of conditions and the following disclaimer in
  18  *    the documentation and/or other materials provided with the
  19  *    distribution.
  20  *
  21  * 3. All advertising materials mentioning features or use of this
  22  *    software must display the following acknowledgment:
  23  *    "This product includes software developed by the OpenSSL Project
  24  *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
  25  *
  26  * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
  27  *    endorse or promote products derived from this software without
  28  *    prior written permission. For written permission, please contact
  29  *    openssl-core@openssl.org.
  30  *
  31  * 5. Products derived from this software may not be called "OpenSSL"
  32  *    nor may "OpenSSL" appear in their names without prior written
  33  *    permission of the OpenSSL Project.
  34  *
  35  * 6. Redistributions of any form whatsoever must retain the following
  36  *    acknowledgment:
  37  *    "This product includes software developed by the OpenSSL Project
  38  *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
  39  *
  40  * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
  41  * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  42  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  43  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
  44  * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  45  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  46  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  47  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  48  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  49  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  50  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
  51  * OF THE POSSIBILITY OF SUCH DAMAGE.
  52  * ====================================================================
  53  *
  54  * This product includes cryptographic software written by Eric Young
  55  * (eay@cryptsoft.com).  This product includes software written by Tim
  56  * Hudson (tjh@cryptsoft.com).
  57  *
  58  */
  59 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
  60  * All rights reserved.
  61  *
  62  * This package is an SSL implementation written
  63  * by Eric Young (eay@cryptsoft.com).
  64  * The implementation was written so as to conform with Netscapes SSL.
  65  *
  66  * This library is free for commercial and non-commercial use as long as
  67  * the following conditions are aheared to.  The following conditions
  68  * apply to all code found in this distribution, be it the RC4, RSA,
  69  * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
  70  * included with this distribution is covered by the same copyright terms
  71  * except that the holder is Tim Hudson (tjh@cryptsoft.com).
  72  *
  73  * Copyright remains Eric Young's, and as such any Copyright notices in
  74  * the code are not to be removed.
  75  * If this package is used in a product, Eric Young should be given attribution
  76  * as the author of the parts of the library used.
  77  * This can be in the form of a textual message at program startup or
  78  * in documentation (online or textual) provided with the package.
  79  *
  80  * Redistribution and use in source and binary forms, with or without
  81  * modification, are permitted provided that the following conditions
  82  * are met:
  83  * 1. Redistributions of source code must retain the copyright
  84  *    notice, this list of conditions and the following disclaimer.
  85  * 2. Redistributions in binary form must reproduce the above copyright
  86  *    notice, this list of conditions and the following disclaimer in the
  87  *    documentation and/or other materials provided with the distribution.
  88  * 3. All advertising materials mentioning features or use of this software
  89  *    must display the following acknowledgement:
  90  *    "This product includes cryptographic software written by
  91  *     Eric Young (eay@cryptsoft.com)"
  92  *    The word 'cryptographic' can be left out if the rouines from the library
  93  *    being used are not cryptographic related :-).
  94  * 4. If you include any Windows specific code (or a derivative thereof) from
  95  *    the apps directory (application code) you must include an acknowledgement:
  96  *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
  97  *
  98  * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
  99  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 100  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 101  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 102  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 103  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 104  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 105  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 106  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 107  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 108  * SUCH DAMAGE.
 109  *
 110  * The licence and distribution terms for any publically available version or
 111  * derivative of this code cannot be changed.  i.e. this code cannot simply be
 112  * copied and put under another distribution licence
 113  * [including the GNU Public Licence.]
 114  */
 115
 116 #include <stdio.h>
 117 #include <errno.h>
 118 #define USE_SOCKETS
 119 #include "ssl_locl.h"
 120 #include <openssl/evp.h>
 121 #include <openssl/buffer.h>
 122 #include <openssl/pqueue.h>
 123 #include <openssl/rand.h>
 124
 125 /* mod 128 saturating subtract of two 64-bit values in big-endian order */
 126 static int satsub64be(const unsigned char *v1,const unsigned char *v2)
 127 {       int ret,sat,brw,i;
 128
 129         if (sizeof(long) == 8) do
 130         {       const union { long one; char little; } is_endian = {1};
 131                 long l;
 132
 133                 if (is_endian.little)                   break;
 134                 /* not reached on little-endians */
 135                 /* following test is redundant, because input is
 136                  * always aligned, but I take no chances... */
 137                 if (((size_t)v1|(size_t)v2)&0x7)        break;
 138
 139                 l  = *((long *)v1);
 140                 l -= *((long *)v2);
 141                 if (l>128)              return 128;
 142                 else if (l<-128)        return -128;
 143                 else                    return (int)l;
 144         } while (0);
 145
 146         ret = (int)v1[7]-(int)v2[7];
 147         sat = 0;
 148         brw = ret>>8;   /* brw is either 0 or -1 */
 149         if (ret & 0x80)
 150         {       for (i=6;i>=0;i--)
 151                 {       brw += (int)v1[i]-(int)v2[i];
 152                         sat |= ~brw;
 153                         brw >>= 8;
 154                 }
 155         }
 156         else
 157         {       for (i=6;i>=0;i--)
 158                 {       brw += (int)v1[i]-(int)v2[i];
 159                         sat |= brw;
 160                         brw >>= 8;
 161                 }
 162         }
 163         brw <<= 8;      /* brw is either 0 or -256 */
 164
 165         if (sat&0xff)   return brw | 0x80;
 166         else            return brw + (ret&0xFF);
 167 }
 168
 169 static int have_handshake_fragment(SSL *s, int type, unsigned char *buf,
 170         int len, int peek);
 171 static int dtls1_record_replay_check(SSL *s, DTLS1_BITMAP *bitmap);
 172 static void dtls1_record_bitmap_update(SSL *s, DTLS1_BITMAP *bitmap);
 173 static DTLS1_BITMAP *dtls1_get_bitmap(SSL *s, SSL3_RECORD *rr,
 174     unsigned int *is_next_epoch);
 175 #if 0
 176 static int dtls1_record_needs_buffering(SSL *s, SSL3_RECORD *rr,
 177         unsigned short *priority, unsigned long *offset);
 178 #endif
 179 static int dtls1_buffer_record(SSL *s, record_pqueue *q,
 180         unsigned char *priority);
 181 static int dtls1_process_record(SSL *s);
 182
 183 /* copy buffered record into SSL structure */
 184 static int
 185 dtls1_copy_record(SSL *s, pitem *item)
 186     {
 187     DTLS1_RECORD_DATA *rdata;
 188
 189     rdata = (DTLS1_RECORD_DATA *)item->data;
 190
 191     if (s->s3->rbuf.buf != NULL)
 192         OPENSSL_free(s->s3->rbuf.buf);
 193
 194     s->packet = rdata->packet;
 195     s->packet_length = rdata->packet_length;
 196     memcpy(&(s->s3->rbuf), &(rdata->rbuf), sizeof(SSL3_BUFFER));
 197     memcpy(&(s->s3->rrec), &(rdata->rrec), sizeof(SSL3_RECORD));
 198
 199         /* Set proper sequence number for mac calculation */
 200         memcpy(&(s->s3->read_sequence[2]), &(rdata->packet[5]), 6);
 201
 202     return(1);
 203     }
 204
 205
 206 static int
 207 dtls1_buffer_record(SSL *s, record_pqueue *queue, unsigned char *priority)
 208         {
 209         DTLS1_RECORD_DATA *rdata;
 210         pitem *item;
 211
 212         /* Limit the size of the queue to prevent DOS attacks */
 213         if (pqueue_size(queue->q) >= 100)
 214                 return 0;
 215
 216         rdata = OPENSSL_malloc(sizeof(DTLS1_RECORD_DATA));
 217         item = pitem_new(priority, rdata);
 218         if (rdata == NULL || item == NULL)
 219                 {
 220                 if (rdata != NULL) OPENSSL_free(rdata);
 221                 if (item != NULL) pitem_free(item);
 222
 223                 SSLerr(SSL_F_DTLS1_BUFFER_RECORD, ERR_R_INTERNAL_ERROR);
 224                 return(0);
 225                 }
 226
 227         rdata->packet = s->packet;
 228         rdata->packet_length = s->packet_length;
 229         memcpy(&(rdata->rbuf), &(s->s3->rbuf), sizeof(SSL3_BUFFER));
 230         memcpy(&(rdata->rrec), &(s->s3->rrec), sizeof(SSL3_RECORD));
 231
 232         item->data = rdata;
 233
 234 #ifndef OPENSSL_NO_SCTP
 235         /* Store bio_dgram_sctp_rcvinfo struct */
 236         if (BIO_dgram_is_sctp(SSL_get_rbio(s)) &&
 237             (s->state == SSL3_ST_SR_FINISHED_A || s->state == SSL3_ST_CR_FINISHED_A)) {
 238                 BIO_ctrl(SSL_get_rbio(s), BIO_CTRL_DGRAM_SCTP_GET_RCVINFO, sizeof(rdata->recordinfo), &rdata->recordinfo);
 239         }
 240 #endif
 241
 242         s->packet = NULL;
 243         s->packet_length = 0;
 244         memset(&(s->s3->rbuf), 0, sizeof(SSL3_BUFFER));
 245         memset(&(s->s3->rrec), 0, sizeof(SSL3_RECORD));
 246
 247         if (!ssl3_setup_buffers(s))
 248                 {
 249                 SSLerr(SSL_F_DTLS1_BUFFER_RECORD, ERR_R_INTERNAL_ERROR);
 250                 OPENSSL_free(rdata);
 251                 pitem_free(item);
 252                 return(0);
 253                 }
 254
 255         /* insert should not fail, since duplicates are dropped */
 256         if (pqueue_insert(queue->q, item) == NULL)
 257                 {
 258                 SSLerr(SSL_F_DTLS1_BUFFER_RECORD, ERR_R_INTERNAL_ERROR);
 259                 OPENSSL_free(rdata);
 260                 pitem_free(item);
 261                 return(0);
 262                 }
 263
 264         return(1);
 265         }
 266
 267
 268 static int
 269 dtls1_retrieve_buffered_record(SSL *s, record_pqueue *queue)
 270     {
 271     pitem *item;
 272
 273     item = pqueue_pop(queue->q);
 274     if (item)
 275         {
 276         dtls1_copy_record(s, item);
 277
 278         OPENSSL_free(item->data);
 279                 pitem_free(item);
 280
 281         return(1);
 282         }
 283
 284     return(0);
 285     }
 286
 287
 288 /* retrieve a buffered record that belongs to the new epoch, i.e., not processed
 289  * yet */
 290 #define dtls1_get_unprocessed_record(s) \
 291                    dtls1_retrieve_buffered_record((s), \
 292                    &((s)->d1->unprocessed_rcds))
 293
 294 /* retrieve a buffered record that belongs to the current epoch, ie, processed */
 295 #define dtls1_get_processed_record(s) \
 296                    dtls1_retrieve_buffered_record((s), \
 297                    &((s)->d1->processed_rcds))
 298
 299 static int
 300 dtls1_process_buffered_records(SSL *s)
 301     {
 302     pitem *item;
 303
 304     item = pqueue_peek(s->d1->unprocessed_rcds.q);
 305     if (item)
 306         {
 307         /* Check if epoch is current. */
 308         if (s->d1->unprocessed_rcds.epoch != s->d1->r_epoch)
 309             return(1);  /* Nothing to do. */
 310
 311         /* Process all the records. */
 312         while (pqueue_peek(s->d1->unprocessed_rcds.q))
 313             {
 314             dtls1_get_unprocessed_record(s);
 315             if ( ! dtls1_process_record(s))
 316                 return(0);
 317             dtls1_buffer_record(s, &(s->d1->processed_rcds),
 318                 s->s3->rrec.seq_num);
 319             }
 320         }
 321
 322     /* sync epoch numbers once all the unprocessed records
 323      * have been processed */
 324     s->d1->processed_rcds.epoch = s->d1->r_epoch;
 325     s->d1->unprocessed_rcds.epoch = s->d1->r_epoch + 1;
 326
 327     return(1);
 328     }
 329
 330
 331 #if 0
 332
 333 static int
 334 dtls1_get_buffered_record(SSL *s)
 335         {
 336         pitem *item;
 337         PQ_64BIT priority =
 338                 (((PQ_64BIT)s->d1->handshake_read_seq) << 32) |
 339                 ((PQ_64BIT)s->d1->r_msg_hdr.frag_off);
 340
 341         if ( ! SSL_in_init(s))  /* if we're not (re)negotiating,
 342                                                            nothing buffered */
 343                 return 0;
 344
 345
 346         item = pqueue_peek(s->d1->rcvd_records);
 347         if (item && item->priority == priority)
 348                 {
 349                 /* Check if we've received the record of interest.  It must be
 350                  * a handshake record, since data records as passed up without
 351                  * buffering */
 352                 DTLS1_RECORD_DATA *rdata;
 353                 item = pqueue_pop(s->d1->rcvd_records);
 354                 rdata = (DTLS1_RECORD_DATA *)item->data;
 355
 356                 if (s->s3->rbuf.buf != NULL)
 357                         OPENSSL_free(s->s3->rbuf.buf);
 358
 359                 s->packet = rdata->packet;
 360                 s->packet_length = rdata->packet_length;
 361                 memcpy(&(s->s3->rbuf), &(rdata->rbuf), sizeof(SSL3_BUFFER));
 362                 memcpy(&(s->s3->rrec), &(rdata->rrec), sizeof(SSL3_RECORD));
 363
 364                 OPENSSL_free(item->data);
 365                 pitem_free(item);
 366
 367                 /* s->d1->next_expected_seq_num++; */
 368                 return(1);
 369                 }
 370
 371         return 0;
 372         }
 373
 374 #endif
 375
 376 static int
 377 dtls1_process_record(SSL *s)
 378 {
 379         int i,al;
 380         int enc_err;
 381         SSL_SESSION *sess;
 382         SSL3_RECORD *rr;
 383         unsigned int mac_size;
 384         unsigned char md[EVP_MAX_MD_SIZE];
 385
 386         rr= &(s->s3->rrec);
 387         sess = s->session;
 388
 389         /* At this point, s->packet_length == SSL3_RT_HEADER_LNGTH + rr->length,
 390          * and we have that many bytes in s->packet
 391          */
 392         rr->input= &(s->packet[DTLS1_RT_HEADER_LENGTH]);
 393
 394         /* ok, we can now read from 's->packet' data into 'rr'
 395          * rr->input points at rr->length bytes, which
 396          * need to be copied into rr->data by either
 397          * the decryption or by the decompression
 398          * When the data is 'copied' into the rr->data buffer,
 399          * rr->input will be pointed at the new buffer */
 400
 401         /* We now have - encrypted [ MAC [ compressed [ plain ] ] ]
 402          * rr->length bytes of encrypted compressed stuff. */
 403
 404         /* check is not needed I believe */
 405         if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH)
 406                 {
 407                 al=SSL_AD_RECORD_OVERFLOW;
 408                 SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_ENCRYPTED_LENGTH_TOO_LONG);
 409                 goto f_err;
 410                 }
 411
 412         /* decrypt in place in 'rr->input' */
 413         rr->data=rr->input;
 414         rr->orig_len=rr->length;
 415
 416         enc_err = s->method->ssl3_enc->enc(s,0);
 417         /* enc_err is:
 418          *    0: (in non-constant time) if the record is publically invalid.
 419          *    1: if the padding is valid
 420          *    -1: if the padding is invalid */
 421         if (enc_err == 0)
 422                 {
 423                 /* For DTLS we simply ignore bad packets. */
 424                 rr->length = 0;
 425                 s->packet_length = 0;
 426                 goto err;
 427                 }
 428
 429 #ifdef TLS_DEBUG
 430 printf("dec %d\n",rr->length);
 431 { unsigned int z; for (z=0; z<rr->length; z++) printf("%02X%c",rr->data[z],((z+1)%16)?' ':'\n'); }
 432 printf("\n");
 433 #endif
 434
 435         /* r->length is now the compressed data plus mac */
 436         if ((sess != NULL) &&
 437             (s->enc_read_ctx != NULL) &&
 438             (EVP_MD_CTX_md(s->read_hash) != NULL))
 439                 {
 440                 /* s->read_hash != NULL => mac_size != -1 */
 441                 unsigned char *mac = NULL;
 442                 unsigned char mac_tmp[EVP_MAX_MD_SIZE];
 443                 mac_size=EVP_MD_CTX_size(s->read_hash);
 444                 OPENSSL_assert(mac_size <= EVP_MAX_MD_SIZE);
 445
 446                 /* orig_len is the length of the record before any padding was
 447                  * removed. This is public information, as is the MAC in use,
 448                  * therefore we can safely process the record in a different
 449                  * amount of time if it's too short to possibly contain a MAC.
 450                  */
 451                 if (rr->orig_len < mac_size ||
 452                     /* CBC records must have a padding length byte too. */
 453                     (EVP_CIPHER_CTX_mode(s->enc_read_ctx) == EVP_CIPH_CBC_MODE &&
 454                      rr->orig_len < mac_size+1))
 455                         {
 456                         al=SSL_AD_DECODE_ERROR;
 457                         SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_LENGTH_TOO_SHORT);
 458                         goto f_err;
 459                         }
 460
 461                 if (EVP_CIPHER_CTX_mode(s->enc_read_ctx) == EVP_CIPH_CBC_MODE)
 462                         {
 463                         /* We update the length so that the TLS header bytes
 464                          * can be constructed correctly but we need to extract
 465                          * the MAC in constant time from within the record,
 466                          * without leaking the contents of the padding bytes.
 467                          * */
 468                         mac = mac_tmp;
 469                         ssl3_cbc_copy_mac(mac_tmp, rr, mac_size);
 470                         rr->length -= mac_size;
 471                         }
 472                 else
 473                         {
 474                         /* In this case there's no padding, so |rec->orig_len|
 475                          * equals |rec->length| and we checked that there's
 476                          * enough bytes for |mac_size| above. */
 477                         rr->length -= mac_size;
 478                         mac = &rr->data[rr->length];
 479                         }
 480
 481                 i=s->method->ssl3_enc->mac(s,md,0 /* not send */);
 482                 if (i < 0 || mac == NULL || CRYPTO_memcmp(md, mac, (size_t)mac_size) != 0)
 483                         enc_err = -1;
 484                 if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH+mac_size)
 485                         enc_err = -1;
 486                 }
 487
 488         if (enc_err < 0)
 489                 {
 490                 /* decryption failed, silently discard message */
 491                 rr->length = 0;
 492                 s->packet_length = 0;
 493                 goto err;
 494                 }
 495
 496         /* r->length is now just compressed */
 497         if (s->expand != NULL)
 498                 {
 499                 if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH)
 500                         {
 501                         al=SSL_AD_RECORD_OVERFLOW;
 502                         SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_COMPRESSED_LENGTH_TOO_LONG);
 503                         goto f_err;
 504                         }
 505                 if (!ssl3_do_uncompress(s))
 506                         {
 507                         al=SSL_AD_DECOMPRESSION_FAILURE;
 508                         SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_BAD_DECOMPRESSION);
 509                         goto f_err;
 510                         }
 511                 }
 512
 513         if (rr->length > SSL3_RT_MAX_PLAIN_LENGTH)
 514                 {
 515                 al=SSL_AD_RECORD_OVERFLOW;
 516                 SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_DATA_LENGTH_TOO_LONG);
 517                 goto f_err;
 518                 }
 519
 520         rr->off=0;
 521         /* So at this point the following is true
 522          * ssl->s3->rrec.type   is the type of record
 523          * ssl->s3->rrec.length == number of bytes in record
 524          * ssl->s3->rrec.off    == offset to first valid byte
 525          * ssl->s3->rrec.data   == where to take bytes from, increment
 526          *                         after use :-).
 527          */
 528
 529         /* we have pulled in a full packet so zero things */
 530         s->packet_length=0;
 531         dtls1_record_bitmap_update(s, &(s->d1->bitmap));/* Mark receipt of record. */
 532         return(1);
 533
 534 f_err:
 535         ssl3_send_alert(s,SSL3_AL_FATAL,al);
 536 err:
 537         return(0);
 538 }
 539
 540
 541 /* Call this to get a new input record.
 542  * It will return <= 0 if more data is needed, normally due to an error
 543  * or non-blocking IO.
 544  * When it finishes, one packet has been decoded and can be found in
 545  * ssl->s3->rrec.type    - is the type of record
 546  * ssl->s3->rrec.data,   - data
 547  * ssl->s3->rrec.length, - number of bytes
 548  */
 549 /* used only by dtls1_read_bytes */
 550 int dtls1_get_record(SSL *s)
 551         {
 552         int ssl_major,ssl_minor;
 553         int i,n;
 554         SSL3_RECORD *rr;
 555         unsigned char *p = NULL;
 556         unsigned short version;
 557         DTLS1_BITMAP *bitmap;
 558         unsigned int is_next_epoch;
 559
 560         rr= &(s->s3->rrec);
 561
 562         /* The epoch may have changed.  If so, process all the
 563          * pending records.  This is a non-blocking operation. */
 564         dtls1_process_buffered_records(s);
 565
 566         /* if we're renegotiating, then there may be buffered records */
 567         if (dtls1_get_processed_record(s))
 568                 return 1;
 569
 570         /* get something from the wire */
 571 again:
 572         /* check if we have the header */
 573         if (    (s->rstate != SSL_ST_READ_BODY) ||
 574                 (s->packet_length < DTLS1_RT_HEADER_LENGTH))
 575                 {
 576                 n=ssl3_read_n(s, DTLS1_RT_HEADER_LENGTH, s->s3->rbuf.len, 0);
 577                 /* read timeout is handled by dtls1_read_bytes */
 578                 if (n <= 0) return(n); /* error or non-blocking */
 579
 580                 /* this packet contained a partial record, dump it */
 581                 if (s->packet_length != DTLS1_RT_HEADER_LENGTH)
 582                         {
 583                         s->packet_length = 0;
 584                         goto again;
 585                         }
 586
 587                 s->rstate=SSL_ST_READ_BODY;
 588
 589                 p=s->packet;
 590
 591                 if (s->msg_callback)
 592                         s->msg_callback(0, 0, SSL3_RT_HEADER, p, DTLS1_RT_HEADER_LENGTH, s, s->msg_callback_arg);
 593
 594                 /* Pull apart the header into the DTLS1_RECORD */
 595                 rr->type= *(p++);
 596                 ssl_major= *(p++);
 597                 ssl_minor= *(p++);
 598                 version=(ssl_major<<8)|ssl_minor;
 599
 600                 /* sequence number is 64 bits, with top 2 bytes = epoch */
 601                 n2s(p,rr->epoch);
 602
 603                 memcpy(&(s->s3->read_sequence[2]), p, 6);
 604                 p+=6;
 605
 606                 n2s(p,rr->length);
 607
 608                 /* Lets check version */
 609                 if (!s->first_packet)
 610                         {
 611                         if (version != s->version)
 612                                 {
 613                                 /* unexpected version, silently discard */
 614                                 rr->length = 0;
 615                                 s->packet_length = 0;
 616                                 goto again;
 617                                 }
 618                         }
 619
 620                 if ((version & 0xff00) != (s->version & 0xff00))
 621                         {
 622                         /* wrong version, silently discard record */
 623                         rr->length = 0;
 624                         s->packet_length = 0;
 625                         goto again;
 626                         }
 627
 628                 if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH)
 629                         {
 630                         /* record too long, silently discard it */
 631                         rr->length = 0;
 632                         s->packet_length = 0;
 633                         goto again;
 634                         }
 635
 636                 /* now s->rstate == SSL_ST_READ_BODY */
 637                 }
 638
 639         /* s->rstate == SSL_ST_READ_BODY, get and decode the data */
 640
 641         if (rr->length > s->packet_length-DTLS1_RT_HEADER_LENGTH)
 642                 {
 643                 /* now s->packet_length == DTLS1_RT_HEADER_LENGTH */
 644                 i=rr->length;
 645                 n=ssl3_read_n(s,i,i,1);
 646                 if (n <= 0) return(n); /* error or non-blocking io */
 647
 648                 /* this packet contained a partial record, dump it */
 649                 if ( n != i)
 650                         {
 651                         rr->length = 0;
 652                         s->packet_length = 0;
 653                         goto again;
 654                         }
 655
 656                 /* now n == rr->length,
 657                  * and s->packet_length == DTLS1_RT_HEADER_LENGTH + rr->length */
 658                 }
 659         s->rstate=SSL_ST_READ_HEADER; /* set state for later operations */
 660
 661         /* match epochs.  NULL means the packet is dropped on the floor */
 662         bitmap = dtls1_get_bitmap(s, rr, &is_next_epoch);
 663         if ( bitmap == NULL)
 664                 {
 665                 rr->length = 0;
 666                 s->packet_length = 0;  /* dump this record */
 667                 goto again;   /* get another record */
 668                 }
 669
 670 #ifndef OPENSSL_NO_SCTP
 671         /* Only do replay check if no SCTP bio */
 672         if (!BIO_dgram_is_sctp(SSL_get_rbio(s)))
 673                 {
 674 #endif
 675                 /* Check whether this is a repeat, or aged record.
 676                  * Don't check if we're listening and this message is
 677                  * a ClientHello. They can look as if they're replayed,
 678                  * since they arrive from different connections and
 679                  * would be dropped unnecessarily.
 680                  */
 681                 if (!(s->d1->listen && rr->type == SSL3_RT_HANDSHAKE &&
 682                     *p == SSL3_MT_CLIENT_HELLO) &&
 683                     !dtls1_record_replay_check(s, bitmap))
 684                         {
 685                         rr->length = 0;
 686                         s->packet_length=0; /* dump this record */
 687                         goto again;     /* get another record */
 688                         }
 689 #ifndef OPENSSL_NO_SCTP
 690                 }
 691 #endif
 692
 693         /* just read a 0 length packet */
 694         if (rr->length == 0) goto again;
 695
 696         /* If this record is from the next epoch (either HM or ALERT),
 697          * and a handshake is currently in progress, buffer it since it
 698          * cannot be processed at this time. However, do not buffer
 699          * anything while listening.
 700          */
 701         if (is_next_epoch)
 702                 {
 703                 if ((SSL_in_init(s) || s->in_handshake) && !s->d1->listen)
 704                         {
 705                         dtls1_buffer_record(s, &(s->d1->unprocessed_rcds), rr->seq_num);
 706                         }
 707                 rr->length = 0;
 708                 s->packet_length = 0;
 709                 goto again;
 710                 }
 711
 712         if (!dtls1_process_record(s))
 713                 {
 714                 rr->length = 0;
 715                 s->packet_length = 0;  /* dump this record */
 716                 goto again;   /* get another record */
 717                 }
 718
 719         return(1);
 720
 721         }
 722
 723 /* Return up to 'len' payload bytes received in 'type' records.
 724  * 'type' is one of the following:
 725  *
 726  *   -  SSL3_RT_HANDSHAKE (when ssl3_get_message calls us)
 727  *   -  SSL3_RT_APPLICATION_DATA (when ssl3_read calls us)
 728  *   -  0 (during a shutdown, no data has to be returned)
 729  *
 730  * If we don't have stored data to work from, read a SSL/TLS record first
 731  * (possibly multiple records if we still don't have anything to return).
 732  *
 733  * This function must handle any surprises the peer may have for us, such as
 734  * Alert records (e.g. close_notify), ChangeCipherSpec records (not really
 735  * a surprise, but handled as if it were), or renegotiation requests.
 736  * Also if record payloads contain fragments too small to process, we store
 737  * them until there is enough for the respective protocol (the record protocol
 738  * may use arbitrary fragmentation and even interleaving):
 739  *     Change cipher spec protocol
 740  *             just 1 byte needed, no need for keeping anything stored
 741  *     Alert protocol
 742  *             2 bytes needed (AlertLevel, AlertDescription)
 743  *     Handshake protocol
 744  *             4 bytes needed (HandshakeType, uint24 length) -- we just have
 745  *             to detect unexpected Client Hello and Hello Request messages
 746  *             here, anything else is handled by higher layers
 747  *     Application data protocol
 748  *             none of our business
 749  */
 750 int dtls1_read_bytes(SSL *s, int type, unsigned char *buf, int len, int peek)
 751         {
 752         int al,i,j,ret;
 753         unsigned int n;
 754         SSL3_RECORD *rr;
 755         void (*cb)(const SSL *ssl,int type2,int val)=NULL;
 756
 757         if (s->s3->rbuf.buf == NULL) /* Not initialized yet */
 758                 if (!ssl3_setup_buffers(s))
 759                         return(-1);
 760
 761     /* XXX: check what the second '&& type' is about */
 762         if ((type && (type != SSL3_RT_APPLICATION_DATA) &&
 763                 (type != SSL3_RT_HANDSHAKE) && type) ||
 764             (peek && (type != SSL3_RT_APPLICATION_DATA)))
 765                 {
 766                 SSLerr(SSL_F_DTLS1_READ_BYTES, ERR_R_INTERNAL_ERROR);
 767                 return -1;
 768                 }
 769
 770         /* check whether there's a handshake message (client hello?) waiting */
 771         if ( (ret = have_handshake_fragment(s, type, buf, len, peek)))
 772                 return ret;
 773
 774         /* Now s->d1->handshake_fragment_len == 0 if type == SSL3_RT_HANDSHAKE. */
 775
 776 #ifndef OPENSSL_NO_SCTP
 777         /* Continue handshake if it had to be interrupted to read
 778          * app data with SCTP.
 779          */
 780         if ((!s->in_handshake && SSL_in_init(s)) ||
 781             (BIO_dgram_is_sctp(SSL_get_rbio(s)) &&
 782              (s->state == DTLS1_SCTP_ST_SR_READ_SOCK || s->state == DTLS1_SCTP_ST_CR_READ_SOCK) &&
 783              s->s3->in_read_app_data != 2))
 784 #else
 785         if (!s->in_handshake && SSL_in_init(s))
 786 #endif
 787                 {
 788                 /* type == SSL3_RT_APPLICATION_DATA */
 789                 i=s->handshake_func(s);
 790                 if (i < 0) return(i);
 791                 if (i == 0)
 792                         {
 793                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
 794                         return(-1);
 795                         }
 796                 }
 797
 798 start:
 799         s->rwstate=SSL_NOTHING;
 800
 801         /* s->s3->rrec.type         - is the type of record
 802          * s->s3->rrec.data,    - data
 803          * s->s3->rrec.off,     - offset into 'data' for next read
 804          * s->s3->rrec.length,  - number of bytes. */
 805         rr = &(s->s3->rrec);
 806
 807         /* We are not handshaking and have no data yet,
 808          * so process data buffered during the last handshake
 809          * in advance, if any.
 810          */
 811         if (s->state == SSL_ST_OK && rr->length == 0)
 812                 {
 813                 pitem *item;
 814                 item = pqueue_pop(s->d1->buffered_app_data.q);
 815                 if (item)
 816                         {
 817 #ifndef OPENSSL_NO_SCTP
 818                         /* Restore bio_dgram_sctp_rcvinfo struct */
 819                         if (BIO_dgram_is_sctp(SSL_get_rbio(s)))
 820                                 {
 821                                 DTLS1_RECORD_DATA *rdata = (DTLS1_RECORD_DATA *) item->data;
 822                                 BIO_ctrl(SSL_get_rbio(s), BIO_CTRL_DGRAM_SCTP_SET_RCVINFO, sizeof(rdata->recordinfo), &rdata->recordinfo);
 823                                 }
 824 #endif
 825
 826                         dtls1_copy_record(s, item);
 827
 828                         OPENSSL_free(item->data);
 829                         pitem_free(item);
 830                         }
 831                 }
 832
 833         /* Check for timeout */
 834         if (dtls1_handle_timeout(s) > 0)
 835                 goto start;
 836
 837         /* get new packet if necessary */
 838         if ((rr->length == 0) || (s->rstate == SSL_ST_READ_BODY))
 839                 {
 840                 ret=dtls1_get_record(s);
 841                 if (ret <= 0)
 842                         {
 843                         ret = dtls1_read_failed(s, ret);
 844                         /* anything other than a timeout is an error */
 845                         if (ret <= 0)
 846                                 return(ret);
 847                         else
 848                                 goto start;
 849                         }
 850                 }
 851
 852         if (s->d1->listen && rr->type != SSL3_RT_HANDSHAKE)
 853                 {
 854                 rr->length = 0;
 855                 goto start;
 856                 }
 857
 858         /* we now have a packet which can be read and processed */
 859
 860         if (s->s3->change_cipher_spec /* set when we receive ChangeCipherSpec,
 861                                        * reset by ssl3_get_finished */
 862                 && (rr->type != SSL3_RT_HANDSHAKE))
 863                 {
 864                 /* We now have application data between CCS and Finished.
 865                  * Most likely the packets were reordered on their way, so
 866                  * buffer the application data for later processing rather
 867                  * than dropping the connection.
 868                  */
 869                 dtls1_buffer_record(s, &(s->d1->buffered_app_data), rr->seq_num);
 870                 rr->length = 0;
 871                 goto start;
 872                 }
 873
 874         /* If the other end has shut down, throw anything we read away
 875          * (even in 'peek' mode) */
 876         if (s->shutdown & SSL_RECEIVED_SHUTDOWN)
 877                 {
 878                 rr->length=0;
 879                 s->rwstate=SSL_NOTHING;
 880                 return(0);
 881                 }
 882
 883
 884         if (type == rr->type) /* SSL3_RT_APPLICATION_DATA or SSL3_RT_HANDSHAKE */
 885                 {
 886                 /* make sure that we are not getting application data when we
 887                  * are doing a handshake for the first time */
 888                 if (SSL_in_init(s) && (type == SSL3_RT_APPLICATION_DATA) &&
 889                         (s->enc_read_ctx == NULL))
 890                         {
 891                         al=SSL_AD_UNEXPECTED_MESSAGE;
 892                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_APP_DATA_IN_HANDSHAKE);
 893                         goto f_err;
 894                         }
 895
 896                 if (len <= 0) return(len);
 897
 898                 if ((unsigned int)len > rr->length)
 899                         n = rr->length;
 900                 else
 901                         n = (unsigned int)len;
 902
 903                 memcpy(buf,&(rr->data[rr->off]),n);
 904                 if (!peek)
 905                         {
 906                         rr->length-=n;
 907                         rr->off+=n;
 908                         if (rr->length == 0)
 909                                 {
 910                                 s->rstate=SSL_ST_READ_HEADER;
 911                                 rr->off=0;
 912                                 }
 913                         }
 914
 915 #ifndef OPENSSL_NO_SCTP
 916                         /* We were about to renegotiate but had to read
 917                          * belated application data first, so retry.
 918                          */
 919                         if (BIO_dgram_is_sctp(SSL_get_rbio(s)) &&
 920                             rr->type == SSL3_RT_APPLICATION_DATA &&
 921                             (s->state == DTLS1_SCTP_ST_SR_READ_SOCK || s->state == DTLS1_SCTP_ST_CR_READ_SOCK))
 922                                 {
 923                                 s->rwstate=SSL_READING;
 924                                 BIO_clear_retry_flags(SSL_get_rbio(s));
 925                                 BIO_set_retry_read(SSL_get_rbio(s));
 926                                 }
 927
 928                         /* We might had to delay a close_notify alert because
 929                          * of reordered app data. If there was an alert and there
 930                          * is no message to read anymore, finally set shutdown.
 931                          */
 932                         if (BIO_dgram_is_sctp(SSL_get_rbio(s)) &&
 933                             s->d1->shutdown_received && !BIO_dgram_sctp_msg_waiting(SSL_get_rbio(s)))
 934                                 {
 935                                 s->shutdown |= SSL_RECEIVED_SHUTDOWN;
 936                                 return(0);
 937                                 }
 938 #endif
 939                 return(n);
 940                 }
 941
 942
 943         /* If we get here, then type != rr->type; if we have a handshake
 944          * message, then it was unexpected (Hello Request or Client Hello). */
 945
 946         /* In case of record types for which we have 'fragment' storage,
 947          * fill that so that we can process the data at a fixed place.
 948          */
 949                 {
 950                 unsigned int k, dest_maxlen = 0;
 951                 unsigned char *dest = NULL;
 952                 unsigned int *dest_len = NULL;
 953
 954                 if (rr->type == SSL3_RT_HANDSHAKE)
 955                         {
 956                         dest_maxlen = sizeof s->d1->handshake_fragment;
 957                         dest = s->d1->handshake_fragment;
 958                         dest_len = &s->d1->handshake_fragment_len;
 959                         }
 960                 else if (rr->type == SSL3_RT_ALERT)
 961                         {
 962                         dest_maxlen = sizeof(s->d1->alert_fragment);
 963                         dest = s->d1->alert_fragment;
 964                         dest_len = &s->d1->alert_fragment_len;
 965                         }
 966 #ifndef OPENSSL_NO_HEARTBEATS
 967                 else if (rr->type == TLS1_RT_HEARTBEAT)
 968                         {
 969                         dtls1_process_heartbeat(s);
 970
 971                         /* Exit and notify application to read again */
 972                         rr->length = 0;
 973                         s->rwstate=SSL_READING;
 974                         BIO_clear_retry_flags(SSL_get_rbio(s));
 975                         BIO_set_retry_read(SSL_get_rbio(s));
 976                         return(-1);
 977                         }
 978 #endif
 979                 /* else it's a CCS message, or application data or wrong */
 980                 else if (rr->type != SSL3_RT_CHANGE_CIPHER_SPEC)
 981                         {
 982                         /* Application data while renegotiating
 983                          * is allowed. Try again reading.
 984                          */
 985                         if (rr->type == SSL3_RT_APPLICATION_DATA)
 986                                 {
 987                                 BIO *bio;
 988                                 s->s3->in_read_app_data=2;
 989                                 bio=SSL_get_rbio(s);
 990                                 s->rwstate=SSL_READING;
 991                                 BIO_clear_retry_flags(bio);
 992                                 BIO_set_retry_read(bio);
 993                                 return(-1);
 994                                 }
 995
 996                         /* Not certain if this is the right error handling */
 997                         al=SSL_AD_UNEXPECTED_MESSAGE;
 998                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_UNEXPECTED_RECORD);
 999                         goto f_err;
1000                         }
1001
1002                 if (dest_maxlen > 0)
1003                         {
1004             /* XDTLS:  In a pathalogical case, the Client Hello
1005              *  may be fragmented--don't always expect dest_maxlen bytes */
1006                         if ( rr->length < dest_maxlen)
1007                                 {
1008 #ifdef DTLS1_AD_MISSING_HANDSHAKE_MESSAGE
1009                                 /*
1010                                  * for normal alerts rr->length is 2, while
1011                                  * dest_maxlen is 7 if we were to handle this
1012                                  * non-existing alert...
1013                                  */
1014                                 FIX ME
1015 #endif
1016                                 s->rstate=SSL_ST_READ_HEADER;
1017                                 rr->length = 0;
1018                                 goto start;
1019                                 }
1020
1021                         /* now move 'n' bytes: */
1022                         for ( k = 0; k < dest_maxlen; k++)
1023                                 {
1024                                 dest[k] = rr->data[rr->off++];
1025                                 rr->length--;
1026                                 }
1027                         *dest_len = dest_maxlen;
1028                         }
1029                 }
1030
1031         /* s->d1->handshake_fragment_len == 12  iff  rr->type == SSL3_RT_HANDSHAKE;
1032          * s->d1->alert_fragment_len == 7      iff  rr->type == SSL3_RT_ALERT.
1033          * (Possibly rr is 'empty' now, i.e. rr->length may be 0.) */
1034
1035         /* If we are a client, check for an incoming 'Hello Request': */
1036         if ((!s->server) &&
1037                 (s->d1->handshake_fragment_len >= DTLS1_HM_HEADER_LENGTH) &&
1038                 (s->d1->handshake_fragment[0] == SSL3_MT_HELLO_REQUEST) &&
1039                 (s->session != NULL) && (s->session->cipher != NULL))
1040                 {
1041                 s->d1->handshake_fragment_len = 0;
1042
1043                 if ((s->d1->handshake_fragment[1] != 0) ||
1044                         (s->d1->handshake_fragment[2] != 0) ||
1045                         (s->d1->handshake_fragment[3] != 0))
1046                         {
1047                         al=SSL_AD_DECODE_ERROR;
1048                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_BAD_HELLO_REQUEST);
1049                         goto err;
1050                         }
1051
1052                 /* no need to check sequence number on HELLO REQUEST messages */
1053
1054                 if (s->msg_callback)
1055                         s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE,
1056                                 s->d1->handshake_fragment, 4, s, s->msg_callback_arg);
1057
1058                 if (SSL_is_init_finished(s) &&
1059                         !(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS) &&
1060                         !s->s3->renegotiate)
1061                         {
1062                         s->d1->handshake_read_seq++;
1063                         s->new_session = 1;
1064                         ssl3_renegotiate(s);
1065                         if (ssl3_renegotiate_check(s))
1066                                 {
1067                                 i=s->handshake_func(s);
1068                                 if (i < 0) return(i);
1069                                 if (i == 0)
1070                                         {
1071                                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
1072                                         return(-1);
1073                                         }
1074
1075                                 if (!(s->mode & SSL_MODE_AUTO_RETRY))
1076                                         {
1077                                         if (s->s3->rbuf.left == 0) /* no read-ahead left? */
1078                                                 {
1079                                                 BIO *bio;
1080                                                 /* In the case where we try to read application data,
1081                                                  * but we trigger an SSL handshake, we return -1 with
1082                                                  * the retry option set.  Otherwise renegotiation may
1083                                                  * cause nasty problems in the blocking world */
1084                                                 s->rwstate=SSL_READING;
1085                                                 bio=SSL_get_rbio(s);
1086                                                 BIO_clear_retry_flags(bio);
1087                                                 BIO_set_retry_read(bio);
1088                                                 return(-1);
1089                                                 }
1090                                         }
1091                                 }
1092                         }
1093                 /* we either finished a handshake or ignored the request,
1094                  * now try again to obtain the (application) data we were asked for */
1095                 goto start;
1096                 }
1097
1098         if (s->d1->alert_fragment_len >= DTLS1_AL_HEADER_LENGTH)
1099                 {
1100                 int alert_level = s->d1->alert_fragment[0];
1101                 int alert_descr = s->d1->alert_fragment[1];
1102
1103                 s->d1->alert_fragment_len = 0;
1104
1105                 if (s->msg_callback)
1106                         s->msg_callback(0, s->version, SSL3_RT_ALERT,
1107                                 s->d1->alert_fragment, 2, s, s->msg_callback_arg);
1108
1109                 if (s->info_callback != NULL)
1110                         cb=s->info_callback;
1111                 else if (s->ctx->info_callback != NULL)
1112                         cb=s->ctx->info_callback;
1113
1114                 if (cb != NULL)
1115                         {
1116                         j = (alert_level << 8) | alert_descr;
1117                         cb(s, SSL_CB_READ_ALERT, j);
1118                         }
1119
1120                 if (alert_level == 1) /* warning */
1121                         {
1122                         s->s3->warn_alert = alert_descr;
1123                         if (alert_descr == SSL_AD_CLOSE_NOTIFY)
1124                                 {
1125 #ifndef OPENSSL_NO_SCTP
1126                                 /* With SCTP and streams the socket may deliver app data
1127                                  * after a close_notify alert. We have to check this
1128                                  * first so that nothing gets discarded.
1129                                  */
1130                                 if (BIO_dgram_is_sctp(SSL_get_rbio(s)) &&
1131                                         BIO_dgram_sctp_msg_waiting(SSL_get_rbio(s)))
1132                                         {
1133                                         s->d1->shutdown_received = 1;
1134                                         s->rwstate=SSL_READING;
1135                                         BIO_clear_retry_flags(SSL_get_rbio(s));
1136                                         BIO_set_retry_read(SSL_get_rbio(s));
1137                                         return -1;
1138                                         }
1139 #endif
1140                                 s->shutdown |= SSL_RECEIVED_SHUTDOWN;
1141                                 return(0);
1142                                 }
1143 #if 0
1144             /* XXX: this is a possible improvement in the future */
1145                         /* now check if it's a missing record */
1146                         if (alert_descr == DTLS1_AD_MISSING_HANDSHAKE_MESSAGE)
1147                                 {
1148                                 unsigned short seq;
1149                                 unsigned int frag_off;
1150                                 unsigned char *p = &(s->d1->alert_fragment[2]);
1151
1152                                 n2s(p, seq);
1153                                 n2l3(p, frag_off);
1154
1155                                 dtls1_retransmit_message(s,
1156                                                                                  dtls1_get_queue_priority(frag->msg_header.seq, 0),
1157                                                                                  frag_off, &found);
1158                                 if ( ! found  && SSL_in_init(s))
1159                                         {
1160                                         /* fprintf( stderr,"in init = %d\n", SSL_in_init(s)); */
1161                                         /* requested a message not yet sent,
1162                                            send an alert ourselves */
1163                                         ssl3_send_alert(s,SSL3_AL_WARNING,
1164                                                 DTLS1_AD_MISSING_HANDSHAKE_MESSAGE);
1165                                         }
1166                                 }
1167 #endif
1168                         }
1169                 else if (alert_level == 2) /* fatal */
1170                         {
1171                         char tmp[16];
1172
1173                         s->rwstate=SSL_NOTHING;
1174                         s->s3->fatal_alert = alert_descr;
1175                         SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_AD_REASON_OFFSET + alert_descr);
1176                         BIO_snprintf(tmp,sizeof tmp,"%d",alert_descr);
1177                         ERR_add_error_data(2,"SSL alert number ",tmp);
1178                         s->shutdown|=SSL_RECEIVED_SHUTDOWN;
1179                         SSL_CTX_remove_session(s->ctx,s->session);
1180                         return(0);
1181                         }
1182                 else
1183                         {
1184                         al=SSL_AD_ILLEGAL_PARAMETER;
1185                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_UNKNOWN_ALERT_TYPE);
1186                         goto f_err;
1187                         }
1188
1189                 goto start;
1190                 }
1191
1192         if (s->shutdown & SSL_SENT_SHUTDOWN) /* but we have not received a shutdown */
1193                 {
1194                 s->rwstate=SSL_NOTHING;
1195                 rr->length=0;
1196                 return(0);
1197                 }
1198
1199         if (rr->type == SSL3_RT_CHANGE_CIPHER_SPEC)
1200                 {
1201                 struct ccs_header_st ccs_hdr;
1202                 unsigned int ccs_hdr_len = DTLS1_CCS_HEADER_LENGTH;
1203
1204                 dtls1_get_ccs_header(rr->data, &ccs_hdr);
1205
1206                 if (s->version == DTLS1_BAD_VER)
1207                         ccs_hdr_len = 3;
1208
1209                 /* 'Change Cipher Spec' is just a single byte, so we know
1210                  * exactly what the record payload has to look like */
1211                 /* XDTLS: check that epoch is consistent */
1212                 if (    (rr->length != ccs_hdr_len) ||
1213                         (rr->off != 0) || (rr->data[0] != SSL3_MT_CCS))
1214                         {
1215                         i=SSL_AD_ILLEGAL_PARAMETER;
1216                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_BAD_CHANGE_CIPHER_SPEC);
1217                         goto err;
1218                         }
1219
1220                 rr->length=0;
1221
1222                 if (s->msg_callback)
1223                         s->msg_callback(0, s->version, SSL3_RT_CHANGE_CIPHER_SPEC,
1224                                 rr->data, 1, s, s->msg_callback_arg);
1225
1226                 /* We can't process a CCS now, because previous handshake
1227                  * messages are still missing, so just drop it.
1228                  */
1229                 if (!s->d1->change_cipher_spec_ok)
1230                         {
1231                         goto start;
1232                         }
1233
1234                 s->d1->change_cipher_spec_ok = 0;
1235
1236                 s->s3->change_cipher_spec=1;
1237                 if (!ssl3_do_change_cipher_spec(s))
1238                         goto err;
1239
1240                 /* do this whenever CCS is processed */
1241                 dtls1_reset_seq_numbers(s, SSL3_CC_READ);
1242
1243                 if (s->version == DTLS1_BAD_VER)
1244                         s->d1->handshake_read_seq++;
1245
1246 #ifndef OPENSSL_NO_SCTP
1247                 /* Remember that a CCS has been received,
1248                  * so that an old key of SCTP-Auth can be
1249                  * deleted when a CCS is sent. Will be ignored
1250                  * if no SCTP is used
1251                  */
1252                 BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_AUTH_CCS_RCVD, 1, NULL);
1253 #endif
1254
1255                 goto start;
1256                 }
1257
1258         /* Unexpected handshake message (Client Hello, or protocol violation) */
1259         if ((s->d1->handshake_fragment_len >= DTLS1_HM_HEADER_LENGTH) &&
1260                 !s->in_handshake)
1261                 {
1262                 struct hm_header_st msg_hdr;
1263
1264                 /* this may just be a stale retransmit */
1265                 dtls1_get_message_header(rr->data, &msg_hdr);
1266                 if( rr->epoch != s->d1->r_epoch)
1267                         {
1268                         rr->length = 0;
1269                         goto start;
1270                         }
1271
1272                 /* If we are server, we may have a repeated FINISHED of the
1273                  * client here, then retransmit our CCS and FINISHED.
1274                  */
1275                 if (msg_hdr.type == SSL3_MT_FINISHED)
1276                         {
1277                         if (dtls1_check_timeout_num(s) < 0)
1278                                 return -1;
1279
1280                         dtls1_retransmit_buffered_messages(s);
1281                         rr->length = 0;
1282                         goto start;
1283                         }
1284
1285                 if (((s->state&SSL_ST_MASK) == SSL_ST_OK) &&
1286                         !(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS))
1287                         {
1288 #if 0 /* worked only because C operator preferences are not as expected (and
1289        * because this is not really needed for clients except for detecting
1290        * protocol violations): */
1291                         s->state=SSL_ST_BEFORE|(s->server)
1292                                 ?SSL_ST_ACCEPT
1293                                 :SSL_ST_CONNECT;
1294 #else
1295                         s->state = s->server ? SSL_ST_ACCEPT : SSL_ST_CONNECT;
1296 #endif
1297                         s->renegotiate=1;
1298                         s->new_session=1;
1299                         }
1300                 i=s->handshake_func(s);
1301                 if (i < 0) return(i);
1302                 if (i == 0)
1303                         {
1304                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
1305                         return(-1);
1306                         }
1307
1308                 if (!(s->mode & SSL_MODE_AUTO_RETRY))
1309                         {
1310                         if (s->s3->rbuf.left == 0) /* no read-ahead left? */
1311                                 {
1312                                 BIO *bio;
1313                                 /* In the case where we try to read application data,
1314                                  * but we trigger an SSL handshake, we return -1 with
1315                                  * the retry option set.  Otherwise renegotiation may
1316                                  * cause nasty problems in the blocking world */
1317                                 s->rwstate=SSL_READING;
1318                                 bio=SSL_get_rbio(s);
1319                                 BIO_clear_retry_flags(bio);
1320                                 BIO_set_retry_read(bio);
1321                                 return(-1);
1322                                 }
1323                         }
1324                 goto start;
1325                 }
1326
1327         switch (rr->type)
1328                 {
1329         default:
1330 #ifndef OPENSSL_NO_TLS
1331                 /* TLS just ignores unknown message types */
1332                 if (s->version == TLS1_VERSION)
1333                         {
1334                         rr->length = 0;
1335                         goto start;
1336                         }
1337 #endif
1338                 al=SSL_AD_UNEXPECTED_MESSAGE;
1339                 SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_UNEXPECTED_RECORD);
1340                 goto f_err;
1341         case SSL3_RT_CHANGE_CIPHER_SPEC:
1342         case SSL3_RT_ALERT:
1343         case SSL3_RT_HANDSHAKE:
1344                 /* we already handled all of these, with the possible exception
1345                  * of SSL3_RT_HANDSHAKE when s->in_handshake is set, but that
1346                  * should not happen when type != rr->type */
1347                 al=SSL_AD_UNEXPECTED_MESSAGE;
1348                 SSLerr(SSL_F_DTLS1_READ_BYTES,ERR_R_INTERNAL_ERROR);
1349                 goto f_err;
1350         case SSL3_RT_APPLICATION_DATA:
1351                 /* At this point, we were expecting handshake data,
1352                  * but have application data.  If the library was
1353                  * running inside ssl3_read() (i.e. in_read_app_data
1354                  * is set) and it makes sense to read application data
1355                  * at this point (session renegotiation not yet started),
1356                  * we will indulge it.
1357                  */
1358                 if (s->s3->in_read_app_data &&
1359                         (s->s3->total_renegotiations != 0) &&
1360                         ((
1361                                 (s->state & SSL_ST_CONNECT) &&
1362                                 (s->state >= SSL3_ST_CW_CLNT_HELLO_A) &&
1363                                 (s->state <= SSL3_ST_CR_SRVR_HELLO_A)
1364                                 ) || (
1365                                         (s->state & SSL_ST_ACCEPT) &&
1366                                         (s->state <= SSL3_ST_SW_HELLO_REQ_A) &&
1367                                         (s->state >= SSL3_ST_SR_CLNT_HELLO_A)
1368                                         )
1369                                 ))
1370                         {
1371                         s->s3->in_read_app_data=2;
1372                         return(-1);
1373                         }
1374                 else
1375                         {
1376                         al=SSL_AD_UNEXPECTED_MESSAGE;
1377                         SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_UNEXPECTED_RECORD);
1378                         goto f_err;
1379                         }
1380                 }
1381         /* not reached */
1382
1383 f_err:
1384         ssl3_send_alert(s,SSL3_AL_FATAL,al);
1385 err:
1386         return(-1);
1387         }
1388
1389 int
1390 dtls1_write_app_data_bytes(SSL *s, int type, const void *buf_, int len)
1391         {
1392         int i;
1393
1394 #ifndef OPENSSL_NO_SCTP
1395                 /* Check if we have to continue an interrupted handshake
1396                  * for reading belated app data with SCTP.
1397                  */
1398                 if ((SSL_in_init(s) && !s->in_handshake) ||
1399                     (BIO_dgram_is_sctp(SSL_get_wbio(s)) &&
1400                      (s->state == DTLS1_SCTP_ST_SR_READ_SOCK || s->state == DTLS1_SCTP_ST_CR_READ_SOCK)))
1401 #else
1402                 if (SSL_in_init(s) && !s->in_handshake)
1403 #endif
1404                 {
1405                 i=s->handshake_func(s);
1406                 if (i < 0) return(i);
1407                 if (i == 0)
1408                         {
1409                         SSLerr(SSL_F_DTLS1_WRITE_APP_DATA_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE);
1410                         return -1;
1411                         }
1412                 }
1413
1414         if (len > SSL3_RT_MAX_PLAIN_LENGTH)
1415                 {
1416                         SSLerr(SSL_F_DTLS1_WRITE_APP_DATA_BYTES,SSL_R_DTLS_MESSAGE_TOO_BIG);
1417                         return -1;
1418                 }
1419
1420         i = dtls1_write_bytes(s, type, buf_, len);
1421         return i;
1422         }
1423
1424
1425         /* this only happens when a client hello is received and a handshake
1426          * is started. */
1427 static int
1428 have_handshake_fragment(SSL *s, int type, unsigned char *buf,
1429         int len, int peek)
1430         {
1431
1432         if ((type == SSL3_RT_HANDSHAKE) && (s->d1->handshake_fragment_len > 0))
1433                 /* (partially) satisfy request from storage */
1434                 {
1435                 unsigned char *src = s->d1->handshake_fragment;
1436                 unsigned char *dst = buf;
1437                 unsigned int k,n;
1438
1439                 /* peek == 0 */
1440                 n = 0;
1441                 while ((len > 0) && (s->d1->handshake_fragment_len > 0))
1442                         {
1443                         *dst++ = *src++;
1444                         len--; s->d1->handshake_fragment_len--;
1445                         n++;
1446                         }
1447                 /* move any remaining fragment bytes: */
1448                 for (k = 0; k < s->d1->handshake_fragment_len; k++)
1449                         s->d1->handshake_fragment[k] = *src++;
1450                 return n;
1451                 }
1452
1453         return 0;
1454         }
1455
1456
1457
1458
1459 /* Call this to write data in records of type 'type'
1460  * It will return <= 0 if not all data has been sent or non-blocking IO.
1461  */
1462 int dtls1_write_bytes(SSL *s, int type, const void *buf, int len)
1463         {
1464         int i;
1465
1466         OPENSSL_assert(len <= SSL3_RT_MAX_PLAIN_LENGTH);
1467         s->rwstate=SSL_NOTHING;
1468         i=do_dtls1_write(s, type, buf, len, 0);
1469         return i;
1470         }
1471
1472 int do_dtls1_write(SSL *s, int type, const unsigned char *buf, unsigned int len, int create_empty_fragment)
1473         {
1474         unsigned char *p,*pseq;
1475         int i,mac_size,clear=0;
1476         int prefix_len = 0;
1477         int eivlen;
1478         SSL3_RECORD *wr;
1479         SSL3_BUFFER *wb;
1480         SSL_SESSION *sess;
1481
1482         /* first check if there is a SSL3_BUFFER still being written
1483          * out.  This will happen with non blocking IO */
1484         if (s->s3->wbuf.left != 0)
1485                 {
1486                 OPENSSL_assert(0); /* XDTLS:  want to see if we ever get here */
1487                 return(ssl3_write_pending(s,type,buf,len));
1488                 }
1489
1490         /* If we have an alert to send, lets send it */
1491         if (s->s3->alert_dispatch)
1492                 {
1493                 i=s->method->ssl_dispatch_alert(s);
1494                 if (i <= 0)
1495                         return(i);
1496                 /* if it went, fall through and send more stuff */
1497                 }
1498
1499         if (len == 0 && !create_empty_fragment)
1500                 return 0;
1501
1502         wr= &(s->s3->wrec);
1503         wb= &(s->s3->wbuf);
1504         sess=s->session;
1505
1506         if (    (sess == NULL) ||
1507                 (s->enc_write_ctx == NULL) ||
1508                 (EVP_MD_CTX_md(s->write_hash) == NULL))
1509                 clear=1;
1510
1511         if (clear)
1512                 mac_size=0;
1513         else
1514                 {
1515                 mac_size=EVP_MD_CTX_size(s->write_hash);
1516                 if (mac_size < 0)
1517                         goto err;
1518                 }
1519
1520         /* DTLS implements explicit IV, so no need for empty fragments */
1521 #if 0
1522         /* 'create_empty_fragment' is true only when this function calls itself */
1523         if (!clear && !create_empty_fragment && !s->s3->empty_fragment_done
1524             && SSL_version(s) != DTLS1_VERSION && SSL_version(s) != DTLS1_BAD_VER)
1525                 {
1526                 /* countermeasure against known-IV weakness in CBC ciphersuites
1527                  * (see http://www.openssl.org/~bodo/tls-cbc.txt)
1528                  */
1529
1530                 if (s->s3->need_empty_fragments && type == SSL3_RT_APPLICATION_DATA)
1531                         {
1532                         /* recursive function call with 'create_empty_fragment' set;
1533                          * this prepares and buffers the data for an empty fragment
1534                          * (these 'prefix_len' bytes are sent out later
1535                          * together with the actual payload) */
1536                         prefix_len = s->method->do_ssl_write(s, type, buf, 0, 1);
1537                         if (prefix_len <= 0)
1538                                 goto err;
1539
1540                         if (s->s3->wbuf.len < (size_t)prefix_len + SSL3_RT_MAX_PACKET_SIZE)
1541                                 {
1542                                 /* insufficient space */
1543                                 SSLerr(SSL_F_DO_DTLS1_WRITE, ERR_R_INTERNAL_ERROR);
1544                                 goto err;
1545                                 }
1546                         }
1547
1548                 s->s3->empty_fragment_done = 1;
1549                 }
1550 #endif
1551         p = wb->buf + prefix_len;
1552
1553         /* write the header */
1554
1555         *(p++)=type&0xff;
1556         wr->type=type;
1557         /* Special case: for hello verify request, client version 1.0 and
1558          * we haven't decided which version to use yet send back using
1559          * version 1.0 header: otherwise some clients will ignore it.
1560          */
1561         if (s->method->version == DTLS_ANY_VERSION)
1562                 {
1563                 *(p++)=DTLS1_VERSION>>8;
1564                 *(p++)=DTLS1_VERSION&0xff;
1565                 }
1566         else
1567                 {
1568                 *(p++)=s->version>>8;
1569                 *(p++)=s->version&0xff;
1570                 }
1571
1572         /* field where we are to write out packet epoch, seq num and len */
1573         pseq=p;
1574         p+=10;
1575
1576         /* Explicit IV length, block ciphers appropriate version flag */
1577         if (s->enc_write_ctx)
1578                 {
1579                 int mode = EVP_CIPHER_CTX_mode(s->enc_write_ctx);
1580                 if (mode == EVP_CIPH_CBC_MODE)
1581                         {
1582                         eivlen = EVP_CIPHER_CTX_iv_length(s->enc_write_ctx);
1583                         if (eivlen <= 1)
1584                                 eivlen = 0;
1585                         }
1586                 /* Need explicit part of IV for GCM mode */
1587                 else if (mode == EVP_CIPH_GCM_MODE)
1588                         eivlen = EVP_GCM_TLS_EXPLICIT_IV_LEN;
1589                 else
1590                         eivlen = 0;
1591                 }
1592         else
1593                 eivlen = 0;
1594
1595         /* lets setup the record stuff. */
1596         wr->data=p + eivlen;  /* make room for IV in case of CBC */
1597         wr->length=(int)len;
1598         wr->input=(unsigned char *)buf;
1599
1600         /* we now 'read' from wr->input, wr->length bytes into
1601          * wr->data */
1602
1603         /* first we compress */
1604         if (s->compress != NULL)
1605                 {
1606                 if (!ssl3_do_compress(s))
1607                         {
1608                         SSLerr(SSL_F_DO_DTLS1_WRITE,SSL_R_COMPRESSION_FAILURE);
1609                         goto err;
1610                         }
1611                 }
1612         else
1613                 {
1614                 memcpy(wr->data,wr->input,wr->length);
1615                 wr->input=wr->data;
1616                 }
1617
1618         /* we should still have the output to wr->data and the input
1619          * from wr->input.  Length should be wr->length.
1620          * wr->data still points in the wb->buf */
1621
1622         if (mac_size != 0)
1623                 {
1624                 if(s->method->ssl3_enc->mac(s,&(p[wr->length + eivlen]),1) < 0)
1625                         goto err;
1626                 wr->length+=mac_size;
1627                 }
1628
1629         /* this is true regardless of mac size */
1630         wr->input=p;
1631         wr->data=p;
1632
1633         if (eivlen)
1634                 wr->length += eivlen;
1635
1636         s->method->ssl3_enc->enc(s,1);
1637
1638         /* record length after mac and block padding */
1639 /*      if (type == SSL3_RT_APPLICATION_DATA ||
1640         (type == SSL3_RT_ALERT && ! SSL_in_init(s))) */
1641
1642         /* there's only one epoch between handshake and app data */
1643
1644         s2n(s->d1->w_epoch, pseq);
1645
1646         /* XDTLS: ?? */
1647 /*      else
1648         s2n(s->d1->handshake_epoch, pseq); */
1649
1650         memcpy(pseq, &(s->s3->write_sequence[2]), 6);
1651         pseq+=6;
1652         s2n(wr->length,pseq);
1653
1654         if (s->msg_callback)
1655                 s->msg_callback(1, 0, SSL3_RT_HEADER, pseq - DTLS1_RT_HEADER_LENGTH, DTLS1_RT_HEADER_LENGTH, s, s->msg_callback_arg);
1656
1657         /* we should now have
1658          * wr->data pointing to the encrypted data, which is
1659          * wr->length long */
1660         wr->type=type; /* not needed but helps for debugging */
1661         wr->length+=DTLS1_RT_HEADER_LENGTH;
1662
1663 #if 0  /* this is now done at the message layer */
1664         /* buffer the record, making it easy to handle retransmits */
1665         if ( type == SSL3_RT_HANDSHAKE || type == SSL3_RT_CHANGE_CIPHER_SPEC)
1666                 dtls1_buffer_record(s, wr->data, wr->length,
1667                         *((PQ_64BIT *)&(s->s3->write_sequence[0])));
1668 #endif
1669
1670         ssl3_record_sequence_update(&(s->s3->write_sequence[0]));
1671
1672         if (create_empty_fragment)
1673                 {
1674                 /* we are in a recursive call;
1675                  * just return the length, don't write out anything here
1676                  */
1677                 return wr->length;
1678                 }
1679
1680         /* now let's set up wb */
1681         wb->left = prefix_len + wr->length;
1682         wb->offset = 0;
1683
1684         /* memorize arguments so that ssl3_write_pending can detect bad write retries later */
1685         s->s3->wpend_tot=len;
1686         s->s3->wpend_buf=buf;
1687         s->s3->wpend_type=type;
1688         s->s3->wpend_ret=len;
1689
1690         /* we now just need to write the buffer */
1691         return ssl3_write_pending(s,type,buf,len);
1692 err:
1693         return -1;
1694         }
1695
1696
1697
1698 static int dtls1_record_replay_check(SSL *s, DTLS1_BITMAP *bitmap)
1699         {
1700         int cmp;
1701         unsigned int shift;
1702         const unsigned char *seq = s->s3->read_sequence;
1703
1704         cmp = satsub64be(seq,bitmap->max_seq_num);
1705         if (cmp > 0)
1706                 {
1707                 memcpy (s->s3->rrec.seq_num,seq,8);
1708                 return 1; /* this record in new */
1709                 }
1710         shift = -cmp;
1711         if (shift >= sizeof(bitmap->map)*8)
1712                 return 0; /* stale, outside the window */
1713         else if (bitmap->map & (1UL<<shift))
1714                 return 0; /* record previously received */
1715
1716         memcpy (s->s3->rrec.seq_num,seq,8);
1717         return 1;
1718         }
1719
1720
1721 static void dtls1_record_bitmap_update(SSL *s, DTLS1_BITMAP *bitmap)
1722         {
1723         int cmp;
1724         unsigned int shift;
1725         const unsigned char *seq = s->s3->read_sequence;
1726
1727         cmp = satsub64be(seq,bitmap->max_seq_num);
1728         if (cmp > 0)
1729                 {
1730                 shift = cmp;
1731                 if (shift < sizeof(bitmap->map)*8)
1732                         bitmap->map <<= shift, bitmap->map |= 1UL;
1733                 else
1734                         bitmap->map = 1UL;
1735                 memcpy(bitmap->max_seq_num,seq,8);
1736                 }
1737         else    {
1738                 shift = -cmp;
1739                 if (shift < sizeof(bitmap->map)*8)
1740                         bitmap->map |= 1UL<<shift;
1741                 }
1742         }
1743
1744
1745 int dtls1_dispatch_alert(SSL *s)
1746         {
1747         int i,j;
1748         void (*cb)(const SSL *ssl,int type,int val)=NULL;
1749         unsigned char buf[DTLS1_AL_HEADER_LENGTH];
1750         unsigned char *ptr = &buf[0];
1751
1752         s->s3->alert_dispatch=0;
1753
1754         memset(buf, 0x00, sizeof(buf));
1755         *ptr++ = s->s3->send_alert[0];
1756         *ptr++ = s->s3->send_alert[1];
1757
1758 #ifdef DTLS1_AD_MISSING_HANDSHAKE_MESSAGE
1759         if (s->s3->send_alert[1] == DTLS1_AD_MISSING_HANDSHAKE_MESSAGE)
1760                 {
1761                 s2n(s->d1->handshake_read_seq, ptr);
1762 #if 0
1763                 if ( s->d1->r_msg_hdr.frag_off == 0)  /* waiting for a new msg */
1764
1765                 else
1766                         s2n(s->d1->r_msg_hdr.seq, ptr); /* partial msg read */
1767 #endif
1768
1769 #if 0
1770                 fprintf(stderr, "s->d1->handshake_read_seq = %d, s->d1->r_msg_hdr.seq = %d\n",s->d1->handshake_read_seq,s->d1->r_msg_hdr.seq);
1771 #endif
1772                 l2n3(s->d1->r_msg_hdr.frag_off, ptr);
1773                 }
1774 #endif
1775
1776         i = do_dtls1_write(s, SSL3_RT_ALERT, &buf[0], sizeof(buf), 0);
1777         if (i <= 0)
1778                 {
1779                 s->s3->alert_dispatch=1;
1780                 /* fprintf( stderr, "not done with alert\n" ); */
1781                 }
1782         else
1783                 {
1784                 if (s->s3->send_alert[0] == SSL3_AL_FATAL
1785 #ifdef DTLS1_AD_MISSING_HANDSHAKE_MESSAGE
1786                     || s->s3->send_alert[1] == DTLS1_AD_MISSING_HANDSHAKE_MESSAGE
1787 #endif
1788                     )
1789                         (void)BIO_flush(s->wbio);
1790
1791                 if (s->msg_callback)
1792                         s->msg_callback(1, s->version, SSL3_RT_ALERT, s->s3->send_alert,
1793                                 2, s, s->msg_callback_arg);
1794
1795                 if (s->info_callback != NULL)
1796                         cb=s->info_callback;
1797                 else if (s->ctx->info_callback != NULL)
1798                         cb=s->ctx->info_callback;
1799
1800                 if (cb != NULL)
1801                         {
1802                         j=(s->s3->send_alert[0]<<8)|s->s3->send_alert[1];
1803                         cb(s,SSL_CB_WRITE_ALERT,j);
1804                         }
1805                 }
1806         return(i);
1807         }
1808
1809
1810 static DTLS1_BITMAP *
1811 dtls1_get_bitmap(SSL *s, SSL3_RECORD *rr, unsigned int *is_next_epoch)
1812     {
1813
1814     *is_next_epoch = 0;
1815
1816     /* In current epoch, accept HM, CCS, DATA, & ALERT */
1817     if (rr->epoch == s->d1->r_epoch)
1818         return &s->d1->bitmap;
1819
1820     /* Only HM and ALERT messages can be from the next epoch */
1821     else if (rr->epoch == (unsigned long)(s->d1->r_epoch + 1) &&
1822         (rr->type == SSL3_RT_HANDSHAKE ||
1823             rr->type == SSL3_RT_ALERT))
1824         {
1825         *is_next_epoch = 1;
1826         return &s->d1->next_bitmap;
1827         }
1828
1829     return NULL;
1830     }
1831
1832 #if 0
1833 static int
1834 dtls1_record_needs_buffering(SSL *s, SSL3_RECORD *rr, unsigned short *priority,
1835         unsigned long *offset)
1836         {
1837
1838         /* alerts are passed up immediately */
1839         if ( rr->type == SSL3_RT_APPLICATION_DATA ||
1840                 rr->type == SSL3_RT_ALERT)
1841                 return 0;
1842
1843         /* Only need to buffer if a handshake is underway.
1844          * (this implies that Hello Request and Client Hello are passed up
1845          * immediately) */
1846         if ( SSL_in_init(s))
1847                 {
1848                 unsigned char *data = rr->data;
1849                 /* need to extract the HM/CCS sequence number here */
1850                 if ( rr->type == SSL3_RT_HANDSHAKE ||
1851                         rr->type == SSL3_RT_CHANGE_CIPHER_SPEC)
1852                         {
1853                         unsigned short seq_num;
1854                         struct hm_header_st msg_hdr;
1855                         struct ccs_header_st ccs_hdr;
1856
1857                         if ( rr->type == SSL3_RT_HANDSHAKE)
1858                                 {
1859                                 dtls1_get_message_header(data, &msg_hdr);
1860                                 seq_num = msg_hdr.seq;
1861                                 *offset = msg_hdr.frag_off;
1862                                 }
1863                         else
1864                                 {
1865                                 dtls1_get_ccs_header(data, &ccs_hdr);
1866                                 seq_num = ccs_hdr.seq;
1867                                 *offset = 0;
1868                                 }
1869
1870                         /* this is either a record we're waiting for, or a
1871                          * retransmit of something we happened to previously
1872                          * receive (higher layers will drop the repeat silently */
1873                         if ( seq_num < s->d1->handshake_read_seq)
1874                                 return 0;
1875                         if (rr->type == SSL3_RT_HANDSHAKE &&
1876                                 seq_num == s->d1->handshake_read_seq &&
1877                                 msg_hdr.frag_off < s->d1->r_msg_hdr.frag_off)
1878                                 return 0;
1879                         else if ( seq_num == s->d1->handshake_read_seq &&
1880                                 (rr->type == SSL3_RT_CHANGE_CIPHER_SPEC ||
1881                                         msg_hdr.frag_off == s->d1->r_msg_hdr.frag_off))
1882                                 return 0;
1883                         else
1884                                 {
1885                                 *priority = seq_num;
1886                                 return 1;
1887                                 }
1888                         }
1889                 else /* unknown record type */
1890                         return 0;
1891                 }
1892
1893         return 0;
1894         }
1895 #endif
1896
1897 void
1898 dtls1_reset_seq_numbers(SSL *s, int rw)
1899         {
1900         unsigned char *seq;
1901         unsigned int seq_bytes = sizeof(s->s3->read_sequence);
1902
1903         if ( rw & SSL3_CC_READ)
1904                 {
1905                 seq = s->s3->read_sequence;
1906                 s->d1->r_epoch++;
1907                 memcpy(&(s->d1->bitmap), &(s->d1->next_bitmap), sizeof(DTLS1_BITMAP));
1908                 memset(&(s->d1->next_bitmap), 0x00, sizeof(DTLS1_BITMAP));
1909                 }
1910         else
1911                 {
1912                 seq = s->s3->write_sequence;
1913                 memcpy(s->d1->last_write_sequence, seq, sizeof(s->s3->write_sequence));
1914                 s->d1->w_epoch++;
1915                 }
1916
1917         memset(seq, 0x00, seq_bytes);
1918         }