3 # OpenSSL config: determine the operating system and run ./Configure
5 # "config -h" for usage information.
7 # this is a merge of minarch and GuessOS from the Apache Group.
8 # Originally written by Tim Hudson <tjh@cryptsoft.com>.
10 # Original Apache Group comments on GuessOS
12 # Simple OS/Platform guesser. Similar to config.guess but
13 # much, much smaller. Since it was developed for use with
14 # Apache, it follows under Apache's regular licensing
15 # with one specific addition: Any changes or additions
16 # to this script should be Emailed to the Apache
17 # group (apache@apache.org) in general and to
18 # Jim Jagielski (jim@jaguNET.com) in specific.
20 # Be as similar to the output of config.guess/config.sub
28 # pick up any command line args to config
32 -d*) PREFIX="debug-";;
34 -h*) TEST="true"; cat <<EOF
35 Usage: config [options]
36 -d Add a debug- prefix to machine choice.
37 -t Test mode, do not run the Configure perl script.
40 Any other text will be passed to the Configure perl script.
41 See INSTALL for instructions.
45 *) options=$options" $i" ;;
49 # First get uname entries that we use below
51 [ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
52 [ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
53 [ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
54 [ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
57 # Now test for ISC and SCO, since it is has a braindamaged uname.
59 # We need to work around FreeBSD 1.1.5.1
61 XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'`
62 if [ "x$XREL" != "x" ]; then
63 if [ -f /etc/kconfig ]; then
66 echo "${MACHINE}-whatever-isc4"; exit 0
72 echo "whatever-whatever-sco3"; exit 0
75 echo "whatever-whatever-sco5"; exit 0
79 x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
80 x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
81 x2*) echo "whatever-whatever-unixware2"; exit 0 ;;
85 echo "whatever-whatever-unixware1"; exit 0
89 # We hardcode i586 in place of ${MACHINE} for the
90 # following reason. The catch is that even though Pentium
91 # is minimum requirement for platforms in question,
92 # ${MACHINE} gets always assigned to i386. Now, problem
93 # with i386 is that it makes ./config pass 386 to
94 # ./Configure, which in turn makes make generate
95 # inefficient SHA-1 (for this moment) code.
96 x[678]*) echo "i586-sco-unixware7"; exit 0 ;;
102 # Now we simply scan though... In most cases, the SYSTEM info is enough
104 case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
106 MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'`
107 echo "parisc-hp-MPE/iX"; exit 0
110 echo "m68k-apple-aux3"; exit 0
114 echo "${MACHINE}-ibm-aix"; exit 0
118 echo "${MACHINE}-ibm-aix"; exit 0
122 echo "${MACHINE}-ibm-aix3"; exit 0
126 if [ -e /boot/develop/headers/be/bone ]; then
127 echo "beos-x86-bone"; exit 0
129 echo "beos-x86-r5"; exit 0
134 echo "${MACHINE}-dg-dgux"; exit 0
138 echo "${MACHINE}-whatever-ecos"; exit 0
142 echo "${MACHINE}-hi-hiux"; exit 0
146 HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
148 1[0-9].*) # HPUX 10 and 11 targets are unified
149 echo "${MACHINE}-hp-hpux1x"; exit 0
152 echo "${MACHINE}-hp-hpux"; exit 0
158 echo "mips2-sgi-irix"; exit 0
162 echo "mips3-sgi-irix"; exit 0
166 echo "mips4-sgi-irix64"; exit 0
170 echo "${MACHINE}-whatever-linux2"; exit 0
174 echo "${MACHINE}-whatever-linux1"; exit 0
178 echo "hurd-x86"; exit 0;
182 echo "${MACHINE}-lynx-lynxos"; exit 0
185 BSD/OS:4.*) # BSD/OS always says 386
186 echo "i486-whatever-bsdi4"; exit 0
189 BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*)
190 case `/sbin/sysctl -n hw.model` in
192 echo "i586-whatever-bsdi"; exit 0
195 echo "i386-whatever-bsdi"; exit 0
201 echo "${MACHINE}-whatever-bsdi"; exit 0
205 VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
206 MACH=`sysctl -n hw.model`
209 *386* ) MACH="i386" ;;
210 *486* ) MACH="i486" ;;
211 Pentium\ II*) MACH="i686" ;;
212 Pentium* ) MACH="i586" ;;
213 * ) MACH="$MACHINE" ;;
216 i[0-9]86 ) ARCH="pc" ;;
218 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
222 echo "${MACHINE}-whatever-freebsd"; exit 0
226 if [ -z ${CROSS_COMPILE} ]; then
227 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
229 echo "${MACHINE}-whatever-netbsd"; exit 0
234 echo "${MACHINE}-whatever-netbsd"; exit 0
238 echo "${MACHINE}-whatever-openbsd"; exit 0
242 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
246 OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
249 echo "${MACHINE}-dec-tru64"; exit 0
252 echo "${MACHINE}-dec-osf"; exit 0
255 echo "${MACHINE}-dec-osf"; exit 0
263 echo "${MACHINE}-whatever-qnx4"
266 echo "${MACHINE}-whatever-qnx6"
269 echo "${MACHINE}-whatever-qnx"
276 echo "i860-intel-osf1"; exit 0
280 echo "ppc-apple-rhapsody"; exit 0
286 echo "ppc-apple-darwin${VERSION}"
289 echo "i686-apple-darwin${VERSION}"
296 echo "${MACHINE}-whatever-solaris2"; exit 0
300 echo "${MACHINE}-sun-sunos4"; exit 0
304 echo "${MACHINE}-whatever-sysv4"; exit 0
308 echo "i386-stratus-vos"; exit 0
312 echo "hppa1.1-stratus-vos"; exit 0
316 echo "${MACHINE}-whatever-sysv4"; exit 0
320 echo "${MACHINE}-whatever-sysv4"; exit 0
323 *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*)
324 echo "i486-ncr-sysv4"; exit 0
328 echo "${MACHINE}-unknown-ultrix"; exit 0
332 echo "${MACHINE}-siemens-sysv4"; exit 0
336 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
340 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0;
344 echo "${MACHINE}-ncr-sysv4"; exit 0
348 echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
352 echo "mips-sony-newsos4"; exit 0;
356 echo "${MACHINE}-whatever-mingw"; exit 0;
361 echo "${MACHINE}-whatever-cygwin_pre1.3"
364 echo "${MACHINE}-whatever-cygwin"
371 echo "t3e-cray-unicosmk"; exit 0;
375 echo "j90-cray-unicos"; exit 0;
379 echo "nsr-tandem-nsk"; exit 0;
383 echo "${MACHINE}-whatever-vxworks"; exit 0;
388 # Ugg. These are all we can determine by what we know about
389 # the output of uname. Be more creative:
392 # Do the Apollo stuff first. Here, we just simply assume
393 # that the existance of the /usr/apollo directory is proof
395 if [ -d /usr/apollo ]; then
396 echo "whatever-apollo-whatever"
401 ISNEXT=`hostinfo 2>/dev/null`
404 echo "whatever-next-nextstep3.3"; exit 0
407 echo "whatever-next-nextstep"; exit 0
411 # At this point we gone through all the one's
414 echo "${MACHINE}-whatever-${SYSTEM}"
418 # ---------------------------------------------------------------------------
419 # this is where the translation occurs into SSLeay terms
420 # ---------------------------------------------------------------------------
422 # Only set CC if not supplied already
423 if [ -z "$CROSS_COMPILE$CC" ]; then
424 GCCVER=`sh -c "gcc -dumpversion" 2>/dev/null`
425 if [ "$GCCVER" != "" ]; then
426 # then strip off whatever prefix egcs prepends the number with...
427 # Hopefully, this will work for any future prefixes as well.
428 GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
429 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
430 # does give us what we want though, so we use that. We just just the
431 # major and minor version numbers.
432 # peak single digit before and after first dot, e.g. 2.95.1 gives 29
433 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
440 if [ "$SYSTEM" = "HP-UX" ];then
441 # By default gcc is a ILP32 compiler (with long long == 64).
443 if [ $GCCVER -ge 30 ]; then
444 # PA64 support only came in with gcc 3.0.x.
445 # We check if the preprocessor symbol __LP64__ is defined...
446 if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then
447 : # __LP64__ has slipped through, it therefore is not defined
453 if [ "$SYSTEM" = "SunOS" ]; then
454 if [ $GCCVER -ge 30 ]; then
455 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears
456 # to be working, at the very least 'make test' passes...
457 if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then
463 # check for WorkShop C, expected output is "cc: blah-blah C x.x"
464 CCVER=`(cc -V 2>&1) 2>/dev/null | \
465 egrep -e '^cc: .* C [0-9]\.[0-9]' | \
466 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
468 if [ $MACHINE != i86pc -a $CCVER -gt 40 ]; then
469 CC=cc # overrides gcc!!!
470 if [ $CCVER -eq 50 ]; then
471 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
472 echo " patch #107357-01 or later applied."
478 if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
479 # check for Compaq C, expected output is "blah-blah C Vx.x"
480 CCCVER=`(ccc -V 2>&1) 2>/dev/null | \
481 egrep -e '.* C V[0-9]\.[0-9]' | \
482 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
484 if [ $CCCVER -gt 60 ]; then
485 CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably
486 # only on hash routines and des, otherwise gcc (2.95)
487 # keeps along rather tight...
491 if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc
492 (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
497 # read the output of the embedded GuessOS
500 echo Operating system: $GUESSOS
502 # now map the output into SSLeay terms ... really should hack into the
503 # script above so we end up with values in vars but that would take
504 # more time that I want to waste at the moment
513 CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
515 if [ $CPU -ge 4000 ]; then
516 options="$options -mips2"
521 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
523 #if [ $CPU -ge 5000 ]; then
524 # options="$options -mips4"
526 # options="$options -mips3"
531 echo "WARNING! If you wish to build 64-bit library, then you have to"
532 echo " invoke './Configure irix64-mips4-$CC' *manually*."
533 if [ "$TEST" = "false" -a -t 1 ]; then
534 echo " You have about 5 seconds to press Ctrl-C to abort."
535 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
537 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
539 #if [ $CPU -ge 5000 ]; then
540 # options="$options -mips4"
542 # options="$options -mips3"
546 ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
548 ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null`
549 if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
550 echo "WARNING! If you wish to build 64-bit library, then you have to"
551 echo " invoke './Configure darwin64-ppc-cc' *manually*."
552 if [ "$TEST" = "false" -a -t 1 ]; then
553 echo " You have about 5 seconds to press Ctrl-C to abort."
554 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
557 if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
558 OUT="darwin64-ppc-cc"
563 ISA64=`(sysctl -n hw.optional.x86_64) 2>/dev/null`
564 if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then
565 echo "WARNING! If you wish to build 64-bit library, then you have to"
566 echo " invoke './Configure darwin64-x86_64-cc' *manually*."
567 if [ "$TEST" = "false" -a -t 1 ]; then
568 echo " You have about 5 seconds to press Ctrl-C to abort."
569 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
572 if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then
573 OUT="darwin64-x86_64-cc"
578 options="$options -arch%20armv6 -arch%20armv7"
579 OUT="iphoneos-cross" ;;
581 options="$options -arch%20${MACHINE}"
582 OUT="iphoneos-cross" ;;
584 ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
585 case ${ISA:-generic} in
586 *[678]) OUT="linux-alpha+bwx-$CC" ;;
587 *) OUT="linux-alpha-$CC" ;;
589 if [ "$CC" = "gcc" ]; then
590 case ${ISA:-generic} in
591 EV5|EV45) options="$options -mcpu=ev5";;
592 EV56|PCA56) options="$options -mcpu=ev56";;
593 *) options="$options -mcpu=ev6";;
598 echo "WARNING! If you wish to build 64-bit library, then you have to"
599 echo " invoke './Configure linux-ppc64' *manually*."
600 if [ "$TEST" = "false" -a -t 1 ]; then
601 echo " You have about 5 seconds to press Ctrl-C to abort."
602 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
606 ppc-*-linux2) OUT="linux-ppc" ;;
607 ppc60x-*-vxworks*) OUT="vxworks-ppc60x" ;;
608 ppcgen-*-vxworks*) OUT="vxworks-ppcgen" ;;
609 pentium-*-vxworks*) OUT="vxworks-pentium" ;;
610 simlinux-*-vxworks*) OUT="vxworks-simlinux" ;;
611 mips-*-vxworks*) OUT="vxworks-mips";;
612 ia64-*-linux?) OUT="linux-ia64" ;;
614 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
615 echo " and wish to build 64-bit library, then you have to"
616 echo " invoke './Configure linux64-sparcv9' *manually*."
617 if [ "$TEST" = "false" -a -t 1 ]; then
618 echo " You have about 5 seconds to press Ctrl-C to abort."
619 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
621 OUT="linux-sparcv9" ;;
623 KARCH=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo`
624 case ${KARCH:-sun4} in
625 sun4u*) OUT="linux-sparcv9" ;;
626 sun4m) OUT="linux-sparcv8" ;;
627 sun4d) OUT="linux-sparcv8" ;;
628 *) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
631 # 64-bit builds under parisc64 linux are not supported and
632 # compiler is expected to generate 32-bit objects...
633 CPUARCH=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo`
634 CPUSCHEDULE=`awk '/^cpu.[ ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo`
636 # ??TODO ?? Model transformations
637 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
638 # assuming no further arch. identification will ever be used by GCC.
639 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
640 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
641 # for these chips in the future.
642 # PA7300LC -> 7100LC (1.1)
643 # PA8200 -> 8000 (2.0)
644 # PA8500 -> 8000 (2.0)
645 # PA8600 -> 8000 (2.0)
647 CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'`
648 # Finish Model transformations
650 options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH"
651 OUT="linux-generic32" ;;
652 armv[45]*-*-ecos) OUT="ecos-armv4" ;;
653 armv[1-3]*-*-linux2) OUT="linux-generic32" ;;
654 armv[7-9]*-*-linux2) OUT="linux-armv4"; options="$options -march=armv7-a" ;;
655 arm*-*-linux2) OUT="linux-armv4" ;;
656 sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
657 sh*-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
658 m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
659 s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
661 # To be uncommented when glibc bug is fixed, see Configure...
662 #if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then
663 # echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you"
664 # echo " have to invoke './Configure linux32-s390x' *manually*."
665 # if [ "$TEST" = "false" -a -t -1 ]; then
666 # echo " You have about 5 seconds to press Ctrl-C to abort."
667 # (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
672 x86_64-*-linux?) OUT="linux-x86_64" ;;
673 *86-*-linux2) OUT="linux-elf"
674 if [ "$GCCVER" -gt 28 ]; then
675 if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
676 options="$options -march=pentium"
678 if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then
679 options="$options -march=pentiumpro"
681 if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then
682 options="$options -march=k6"
685 *-*-linux1) OUT="linux-aout" ;;
686 *-*-linux2) OUT="linux-generic32" ;;
687 sun4[uv]*-*-solaris2)
688 OUT="solaris-sparcv9-$CC"
689 ISA64=`(isalist) 2>/dev/null | grep sparcv9`
690 if [ "$ISA64" != "" -a "$KERNEL_BITS" = "" ]; then
691 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
692 echo "WARNING! If you wish to build 64-bit library, then you have to"
693 echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
694 if [ "$TEST" = "false" -a -t 1 ]; then
695 echo " You have about 5 seconds to press Ctrl-C to abort."
696 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
698 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
699 # $GCC_ARCH denotes default ABI chosen by compiler driver
700 # (first one found on the $PATH). I assume that user
701 # expects certain consistency with the rest of his builds
702 # and therefore switch over to 64-bit. <appro>
703 OUT="solaris64-sparcv9-gcc"
704 echo "WARNING! If you wish to build 32-bit library, then you have to"
705 echo " invoke './Configure solaris-sparcv9-gcc' *manually*."
706 if [ "$TEST" = "false" -a -t 1 ]; then
707 echo " You have about 5 seconds to press Ctrl-C to abort."
708 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
710 elif [ "$GCC_ARCH" = "-m32" ]; then
711 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
712 echo " and wish to build 64-bit library, then you have to"
713 echo " invoke './Configure solaris64-sparcv9-gcc' *manually*."
714 if [ "$TEST" = "false" -a -t 1 ]; then
715 echo " You have about 5 seconds to press Ctrl-C to abort."
716 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
720 if [ "$ISA64" != "" -a "$KERNEL_BITS" = "64" ]; then
721 OUT="solaris64-sparcv9-$CC"
724 sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
725 sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
726 sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
728 ISA64=`(isalist) 2>/dev/null | grep amd64`
729 if [ "$ISA64" != "" -a ${KERNEL_BITS:-64} -eq 64 ]; then
730 OUT="solaris64-x86_64-$CC"
732 OUT="solaris-x86-$CC"
733 if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then
734 options="$options no-sse2"
738 *-*-sunos4) OUT="sunos-$CC" ;;
740 *86*-*-bsdi4) OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;;
741 alpha*-*-*bsd*) OUT="BSD-generic64"; options="$options -DL_ENDIAN" ;;
742 powerpc64-*-*bsd*) OUT="BSD-generic64"; options="$options -DB_ENDIAN" ;;
743 sparc64-*-*bsd*) OUT="BSD-sparc64" ;;
744 ia64-*-*bsd*) OUT="BSD-ia64" ;;
745 amd64-*-*bsd*) OUT="BSD-x86_64" ;;
746 *86*-*-*bsd*) if [ -z ${CROSS_COMPILE} ]; then
747 # mimic ld behaviour when it's looking for libc...
748 if [ -L /usr/lib/libc.so ]; then # [Free|Net]BSD
749 libc=/usr/lib/libc.so
751 # ld searches for highest libc.so.* and so do we
752 libc=`(ls /usr/lib/libc.so.* | tail -1) 2>/dev/null`
755 case "`(file -L $libc) 2>/dev/null`" in
756 *ELF*) OUT="BSD-x86-elf" ;;
757 *) OUT="BSD-x86"; options="$options no-sse2" ;;
762 ppc85xx-*-*bsd*) OUT="BSD-ppc85xx" ;; # MPC85XX has no hardware FP accelerator
763 *-*-*bsd*) OUT="BSD-generic32" ;;
765 *-*-osf) OUT="osf1-alpha-cc" ;;
766 *-*-tru64) OUT="tru64-alpha-cc" ;;
768 if [ "$CC" = "gcc" ]; then
769 OUT="unixware-7-gcc" ; options="$options no-sse2"
771 OUT="unixware-7" ; options="$options no-sse2 -D__i386__"
774 *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0"; options="$options no-sse2 no-sha512" ;;
775 *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1"; options="$options no-sse2 no-sha512" ;;
777 options="$options no-threads no-shared no-asm no-dso"
780 BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
781 RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
782 *-siemens-sysv4) OUT="SINIX" ;;
784 if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
785 OUT="hpux64-parisc2-gcc"
787 [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
788 KERNEL_BITS=${KERNEL_BITS:-32}
789 CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
790 CPU_VERSION=${CPU_VERSION:-0}
791 # See <sys/unistd.h> for further info on CPU_VERSION.
792 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
793 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
798 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
799 OUT=${OUT:-"hpux-parisc2-${CC}"}
800 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
801 echo "WARNING! If you wish to build 64-bit library then you have to"
802 echo " invoke './Configure hpux64-parisc2-cc' *manually*."
803 if [ "$TEST" = "false" -a -t 1 ]; then
804 echo " You have about 5 seconds to press Ctrl-C to abort."
805 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
808 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
809 OUT="hpux-parisc-${CC}"
810 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
811 OUT="hpux-parisc-${CC}"
812 else # Motorola(?) CPU
815 options="$options -D_REENTRANT" ;;
816 *-hpux) OUT="hpux-parisc-$CC" ;;
818 [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
819 KERNEL_BITS=${KERNEL_BITS:-32}
820 OBJECT_MODE=${OBJECT_MODE:-32}
821 if [ "$CC" = "gcc" ]; then
823 if [ $OBJECT_MODE -eq 64 ]; then
824 echo 'Your $OBJECT_MODE was found to be set to 64'
827 elif [ $OBJECT_MODE -eq 64 ]; then
828 echo 'Your $OBJECT_MODE was found to be set to 64'
832 if [ $KERNEL_BITS -eq 64 ]; then
833 echo "WARNING! If you wish to build 64-bit kit, then you have to"
834 echo " invoke './Configure aix64-cc' *manually*."
835 if [ "$TEST" = "false" -a -t 1 ]; then
836 echo " You have ~5 seconds to press Ctrl-C to abort."
837 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
841 if (lsattr -E -O -l `lsdev -c processor|awk '{print$1;exit}'` | grep -i powerpc) >/dev/null 2>&1; then
842 : # this applies even to Power3 and later, as they return PowerPC_POWER[345]
844 options="$options no-asm"
847 # these are all covered by the catchall below
848 # *-dgux) OUT="dgux" ;;
849 mips-sony-newsos4) OUT="newsos4-gcc" ;;
850 *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
851 *-*-cygwin) OUT="Cygwin" ;;
852 t3e-cray-unicosmk) OUT="cray-t3e" ;;
853 j90-cray-unicos) OUT="cray-j90" ;;
854 nsr-tandem-nsk) OUT="tandem-c89" ;;
855 beos-*) OUT="$GUESSOS" ;;
856 x86pc-*-qnx6) OUT="QNX6-i386" ;;
857 *-*-qnx6) OUT="QNX6" ;;
858 x86-*-android|i?86-*-android) OUT="android-x86" ;;
859 armv[7-9]*-*-android) OUT="android-armv7" ;;
860 *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
863 # NB: This atalla support has been superceded by the ENGINE support
864 # That contains its own header and definitions anyway. Support can
865 # be enabled or disabled on any supported platform without external
866 # headers, eg. by adding the "hw-atalla" switch to ./config or
869 # See whether we can compile Atalla support
870 #if [ -f /usr/include/atasi.h ]
872 # options="$options -DATALLA"
875 if [ -n "$CONFIG_OPTIONS" ]; then
876 options="$options $CONFIG_OPTIONS"
879 if expr "$options" : '.*no\-asm' > /dev/null; then :; else
880 sh -c "$CROSS_COMPILE${CC:-gcc} -Wa,--help -c -o /tmp/null.$$.o -x assembler /dev/null && rm /tmp/null.$$.o" 2>&1 | \
881 grep \\--noexecstack >/dev/null && \
882 options="$options -Wa,--noexecstack"
885 # gcc < 2.8 does not support -march=ultrasparc
886 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
888 echo "WARNING! Falling down to 'solaris-sparcv8-gcc'."
889 echo " Upgrade to gcc-2.8 or later."
891 OUT=solaris-sparcv8-gcc
893 if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
895 echo "WARNING! Falling down to 'linux-sparcv8'."
896 echo " Upgrade to gcc-2.8 or later."
902 i386-*) options="$options 386" ;;
905 for i in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha
907 if [ ! -d crypto/$i ]
909 options="$options no-$i"
913 # Discover Kerberos 5 (since it's still a prototype, we don't
914 # do any guesses yet, that's why this section is commented away.
915 #if [ -d /usr/kerberos ]; then
916 # krb5_dir=/usr/kerberos
917 # if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
918 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
919 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
920 # -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
921 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
922 # options="$options --with-krb5-flavor=MIT"
924 #elif [ -d /usr/heimdal ]; then
925 # krb5_dir=/usr/heimdal
926 # if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
927 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
928 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
929 # -a \( -f $krb5_dir/include/krb5.h \) ]; then
930 # options="$options --with-krb5-flavor=Heimdal"
934 if [ -z "$OUT" ]; then
938 if [ ".$PERL" = . ] ; then
939 for i in . `echo $PATH | sed 's/:/ /g'`; do
940 if [ -f "$i/perl5$EXE" ] ; then
947 if [ ".$PERL" = . ] ; then
948 for i in . `echo $PATH | sed 's/:/ /g'`; do
949 if [ -f "$i/perl$EXE" ] ; then
950 if "$i/perl$EXE" -e 'exit($]<5.0)'; then
958 if [ ".$PERL" = . ] ; then
959 echo "You need Perl 5."
963 # run Configure to check to see if we need to specify the
964 # compiler for the platform ... in which case we add it on
965 # the end ... otherwise we leave it off
967 $PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null
968 if [ $? = "0" ]; then
974 $PERL ./Configure LIST | grep "$OUT" > /dev/null
975 if [ $? = "0" ]; then
976 echo Configuring for $OUT
978 if [ "$TEST" = "true" ]; then
979 echo $PERL ./Configure $OUT $options
981 $PERL ./Configure $OUT $options
984 echo "This system ($OUT) is not supported. See file INSTALL for details."