5 Changes between 0.9.4 and 0.9.5 [xx XXX 2000]
7 *) Bugfix: ssl3_send_server_key_exchange was not restartable
8 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
9 this the server could overwrite ephemeral keys that the client
13 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
14 using 50 iterations of the Rabin-Miller test.
16 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
17 iterations of the Rabin-Miller test as required by the appendix
18 to FIPS PUB 186[-1]) instead of DSA_is_prime.
19 As BN_is_prime_fasttest includes trial division, DSA parameter
20 generation becomes much faster.
22 This implies a change for the callback functions in DSA_is_prime
23 and DSA_generate_parameters: They are now called once for each
24 positive witness in the Rabin-Miller test, not just occasionally
25 in the inner loop; and the parameters to the callback function now
26 provide an iteration count for the outer loop rather than for the
27 current invocation of the inner loop.
30 *) New function BN_is_prime_fasttest that optionally does trial
31 division before starting the Rabin-Miller test and has
32 an additional BN_CTX * argument (whereas BN_is_prime always
33 has to allocate at least one BN_CTX).
36 *) Fix for bug in CRL encoding. The validity dates weren't being handled
40 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
43 *) New function BN_pseudo_rand().
46 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
47 bignum version of BN_from_montgomery() with the working code from
48 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
52 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
53 made it impossible to use the same SSL_SESSION data structure in
54 SSL2 clients in multiple threads.
57 *) The return value of RAND_load_file() no longer counts bytes obtained
58 by stat(). RAND_load_file(..., -1) is new and uses the complete file
59 to seed the PRNG (previously an explicit byte count was required).
60 [Ulf Möller, Bodo Möller]
62 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
63 used (char *) instead of (void *) and had casts all over the place.
66 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
69 *) Retain source code compatibility for BN_prime_checks macro:
70 BN_is_prime(..., BN_prime_checks, ...) now uses
71 BN_prime_checks_for_size to determine the appropriate number of
72 Rabin-Miller iterations.
75 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
76 DH_CHECK_P_NOT_SAFE_PRIME.
77 (Check if this is true? OpenPGP calls them "strong".)
80 *) Merge the functionality of "dh" and "gendh" programs into a new program
81 "dhparam". The old programs are retained for now but will handle DH keys
82 (instead of parameters) in future.
85 *) Make the ciphers, s_server and s_client programs check the return values
86 when a new cipher list is set.
89 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
90 ciphers. Before when the 56bit ciphers were enabled the sorting was
93 The syntax for the cipher sorting has been extended to support sorting by
94 cipher-strength (using the strength_bits hard coded in the tables).
95 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
97 Fix a bug in the cipher-command parser: when supplying a cipher command
98 string with an "undefined" symbol (neither command nor alphanumeric
99 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
102 Due to the strength-sorting extension, the code of the
103 ssl_create_cipher_list() function was completely rearranged. I hope that
104 the readability was also increased :-)
105 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
107 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
108 for the first serial number and places 2 in the serial number file. This
109 avoids problems when the root CA is created with serial number zero and
110 the first user certificate has the same issuer name and serial number
114 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
115 the new code. Add documentation for this stuff.
118 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
119 X509_*() to X509at_*() on the grounds that they don't handle X509
120 structures and behave in an analagous way to the X509v3 functions:
121 they shouldn't be called directly but wrapper functions should be used
124 So we also now have some wrapper functions that call the X509at functions
125 when passed certificate requests. (TO DO: similar things can be done with
126 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
127 things. Some of these need some d2i or i2d and print functionality
128 because they handle more complex structures.)
131 *) Add missing #ifndefs that caused missing symbols when building libssl
132 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
134 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
136 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
137 has a return value which indicates the quality of the random data
138 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
139 error queue. New function RAND_pseudo_bytes() generates output that is
140 guaranteed to be unique but not unpredictable.
143 *) Do more iterations of Rabin-Miller probable prime test (specifically,
144 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
145 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
146 in crypto/bn/bn_prime.c for the complete table). This guarantees a
147 false-positive rate of at most 2^-80 for random input.
150 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
153 *) New function X509_CTX_rget_chain(), this returns the chain
154 from an X509_CTX structure with a dup of the stack and all
155 the X509 reference counts upped: so the stack will exist
156 after X509_CTX_cleanup() has been called. Modify pkcs12.c
159 Also make SSL_SESSION_print() print out the verify return
163 *) Add manpage for the pkcs12 command. Also change the default
164 behaviour so MAC iteration counts are used unless the new
165 -nomaciter option is used. This improves file security and
166 only older versions of MSIE (4.0 for example) need it.
169 *) Honor the no-xxx Configure options when creating .DEF files.
172 *) Add PKCS#10 attributes to field table: challengePassword,
173 unstructuredName and unstructuredAddress. These are taken from
174 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
175 international characters are used.
177 More changes to X509_ATTRIBUTE code: allow the setting of types
178 based on strings. Remove the 'loc' parameter when adding
179 attributes because these will be a SET OF encoding which is sorted
183 *) Initial changes to the 'req' utility to allow request generation
184 automation. This will allow an application to just generate a template
185 file containing all the field values and have req construct the
188 Initial support for X509_ATTRIBUTE handling. Stacks of these are
189 used all over the place including certificate requests and PKCS#7
190 structures. They are currently handled manually where necessary with
191 some primitive wrappers for PKCS#7. The new functions behave in a
192 manner analogous to the X509 extension functions: they allow
193 attributes to be looked up by NID and added.
195 Later something similar to the X509V3 code would be desirable to
196 automatically handle the encoding, decoding and printing of the
197 more complex types. The string types like challengePassword can
198 be handled by the string table functions.
200 Also modified the multi byte string table handling. Now there is
201 a 'global mask' which masks out certain types. The table itself
202 can use the flag STABLE_NO_MASK to ignore the mask setting: this
203 is useful when for example there is only one permissible type
204 (as in countryName) and using the mask might result in no valid
208 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
209 SSL_get_peer_finished to allow applications to obtain the latest
210 Finished messages sent to the peer or expected from the peer,
211 respectively. (SSL_get_peer_finished is usually the Finished message
212 actually received from the peer, otherwise the protocol will be aborted.)
214 As the Finished message are message digests of the complete handshake
215 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
216 be used for external authentication procedures when the authentication
217 provided by SSL/TLS is not desired or is not enough.
220 *) Enhanced support for Alpha Linux is added. Now ./config checks if
221 the host supports BWX extension and if Compaq C is present on the
222 $PATH. Just exploiting of the BWX extension results in 20-30%
223 performance kick for some algorithms, e.g. DES and RC4 to mention
224 a couple. Compaq C in turn generates ~20% faster code for MD5 and
228 *) Add support for MS "fast SGC". This is arguably a violation of the
229 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
230 weak crypto and after checking the certificate is SGC a second one
231 with strong crypto. MS SGC stops the first handshake after receiving
232 the server certificate message and sends a second client hello. Since
233 a server will typically do all the time consuming operations before
234 expecting any further messages from the client (server key exchange
235 is the most expensive) there is little difference between the two.
237 To get OpenSSL to support MS SGC we have to permit a second client
238 hello message after we have sent server done. In addition we have to
239 reset the MAC if we do get this second client hello and include the
243 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
244 if a DER encoded private key is RSA or DSA traditional format. Changed
245 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
246 format DER encoded private key. Newer code should use PKCS#8 format which
247 has the key type encoded in the ASN1 structure. Added DER private key
248 support to pkcs8 application.
251 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
252 ciphersuites has been selected (as required by the SSL 3/TLS 1
253 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
254 is set, we interpret this as a request to violate the specification
255 (the worst that can happen is a handshake failure, and 'correct'
256 behaviour would result in a handshake failure anyway).
259 *) In SSL_CTX_add_session, take into account that there might be multiple
260 SSL_SESSION structures with the same session ID (e.g. when two threads
261 concurrently obtain them from an external cache).
262 The internal cache can handle only one SSL_SESSION with a given ID,
263 so if there's a conflict, we now throw out the old one to achieve
267 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
268 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
269 some routines that use cipher OIDs: some ciphers do not have OIDs
270 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
274 *) Simplify the trust setting structure and code. Now we just have
275 two sequences of OIDs for trusted and rejected settings. These will
276 typically have values the same as the extended key usage extension
277 and any application specific purposes.
279 The trust checking code now has a default behaviour: it will just
280 check for an object with the same NID as the passed id. Functions can
281 be provided to override either the default behaviour or the behaviour
282 for a given id. SSL client, server and email already have functions
283 in place for compatibility: they check the NID and also return "trusted"
284 if the certificate is self signed.
287 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
288 traditional format into an EVP_PKEY structure.
291 *) Add a password callback function PEM_cb() which either prompts for
292 a password if usr_data is NULL or otherwise assumes it is a null
293 terminated password. Allow passwords to be passed on command line
294 environment or config files in a few more utilities.
297 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
298 keys. Add some short names for PKCS#8 PBE algorithms and allow them
299 to be specified on the command line for the pkcs8 and pkcs12 utilities.
300 Update documentation.
303 *) Support for ASN1 "NULL" type. This could be handled before by using
304 ASN1_TYPE but there wasn't any function that would try to read a NULL
305 and produce an error if it couldn't. For compatibility we also have
306 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
307 don't allocate anything because they don't need to.
310 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
312 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
314 *) Rebuild of the memory allocation routines used by OpenSSL code and
315 possibly others as well. The purpose is to make an interface that
316 provide hooks so anyone can build a separate set of allocation and
317 deallocation routines to be used by OpenSSL, for example memory
318 pool implementations, or something else, which was previously hard
319 since Malloc(), Realloc() and Free() were defined as macros having
320 the values malloc, realloc and free, respectively (except for Win32
321 compilations). The same is provided for memory debugging code.
322 OpenSSL already comes with functionality to find memory leaks, but
323 this gives people a chance to debug other memory problems.
325 With these changes, a new set of functions and macros have appeared:
327 CRYPTO_set_mem_debug_functions() [F]
328 CRYPTO_get_mem_debug_functions() [F]
329 CRYPTO_dbg_set_options() [F]
330 CRYPTO_dbg_get_options() [F]
331 CRYPTO_malloc_debug_init() [M]
333 The memory debug functions are NULL by default, unless the library
334 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
335 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
336 gives the standard debugging functions that come with OpenSSL) or
337 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
338 provided by the library user) must be used. When the standard
339 debugging functions are used, CRYPTO_dbg_set_options can be used to
340 request additional information:
341 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
342 the CRYPTO_MDEBUG_xxx macro when compiling the library.
344 Also, things like CRYPTO_set_mem_functions will always give the
345 expected result (the new set of functions is used for allocation
346 and deallocation) at all times, regardless of platform and compiler
349 To finish it up, some functions that were never use in any other
350 way than through macros have a new API and new semantic:
356 All macros of value have retained their old syntax.
357 [Richard Levitte and Bodo Moeller]
359 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
360 ordering of SMIMECapabilities wasn't in "strength order" and there
361 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
365 *) Some ASN1 types with illegal zero length encoding (INTEGER,
366 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
367 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
369 *) Merge in my S/MIME library for OpenSSL. This provides a simple
370 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
371 functionality to handle multipart/signed properly) and a utility
372 called 'smime' to call all this stuff. This is based on code I
373 originally wrote for Celo who have kindly allowed it to be
377 *) Add variants des_set_key_checked and des_set_key_unchecked of
378 des_set_key (aka des_key_sched). Global variable des_check_key
379 decides which of these is called by des_set_key; this way
380 des_check_key behaves as it always did, but applications and
381 the library itself, which was buggy for des_check_key == 1,
382 have a cleaner way to pick the version they need.
385 *) New function PKCS12_newpass() which changes the password of a
389 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
390 dynamic mix. In both cases the ids can be used as an index into the
391 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
392 functions so they accept a list of the field values and the
393 application doesn't need to directly manipulate the X509_TRUST
397 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
401 *) Modify the way the V3 extension code looks up extensions. This now
402 works in a similar way to the object code: we have some "standard"
403 extensions in a static table which is searched with OBJ_bsearch()
404 and the application can add dynamic ones if needed. The file
405 crypto/x509v3/ext_dat.h now has the info: this file needs to be
406 updated whenever a new extension is added to the core code and kept
407 in ext_nid order. There is a simple program 'tabtest.c' which checks
408 this. New extensions are not added too often so this file can readily
409 be maintained manually.
411 There are two big advantages in doing things this way. The extensions
412 can be looked up immediately and no longer need to be "added" using
413 X509V3_add_standard_extensions(): this function now does nothing.
414 [Side note: I get *lots* of email saying the extension code doesn't
415 work because people forget to call this function]
416 Also no dynamic allocation is done unless new extensions are added:
417 so if we don't add custom extensions there is no need to call
418 X509V3_EXT_cleanup().
421 *) Modify enc utility's salting as follows: make salting the default. Add a
422 magic header, so unsalted files fail gracefully instead of just decrypting
423 to garbage. This is because not salting is a big security hole, so people
424 should be discouraged from doing it.
427 *) Fixes and enhancements to the 'x509' utility. It allowed a message
428 digest to be passed on the command line but it only used this
429 parameter when signing a certificate. Modified so all relevant
430 operations are affected by the digest parameter including the
431 -fingerprint and -x509toreq options. Also -x509toreq choked if a
432 DSA key was used because it didn't fix the digest.
435 *) Initial certificate chain verify code. Currently tests the untrusted
436 certificates for consistency with the verify purpose (which is set
437 when the X509_STORE_CTX structure is set up) and checks the pathlength.
439 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
440 this is because it will reject chains with invalid extensions whereas
441 every previous version of OpenSSL and SSLeay made no checks at all.
443 Trust code: checks the root CA for the relevant trust settings. Trust
444 settings have an initial value consistent with the verify purpose: e.g.
445 if the verify purpose is for SSL client use it expects the CA to be
446 trusted for SSL client use. However the default value can be changed to
447 permit custom trust settings: one example of this would be to only trust
448 certificates from a specific "secure" set of CAs.
450 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
451 which should be used for version portability: especially since the
452 verify structure is likely to change more often now.
454 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
455 to set them. If not set then assume SSL clients will verify SSL servers
458 Two new options to the verify program: -untrusted allows a set of
459 untrusted certificates to be passed in and -purpose which sets the
460 intended purpose of the certificate. If a purpose is set then the
461 new chain verify code is used to check extension consistency.
464 *) Support for the authority information access extension.
467 *) Modify RSA and DSA PEM read routines to transparently handle
468 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
469 public keys in a format compatible with certificate
470 SubjectPublicKeyInfo structures. Unfortunately there were already
471 functions called *_PublicKey_* which used various odd formats so
472 these are retained for compatibility: however the DSA variants were
473 never in a public release so they have been deleted. Changed dsa/rsa
474 utilities to handle the new format: note no releases ever handled public
475 keys so we should be OK.
477 The primary motivation for this change is to avoid the same fiasco
478 that dogs private keys: there are several incompatible private key
479 formats some of which are standard and some OpenSSL specific and
480 require various evil hacks to allow partial transparent handling and
481 even then it doesn't work with DER formats. Given the option anything
482 other than PKCS#8 should be dumped: but the other formats have to
483 stay in the name of compatibility.
485 With public keys and the benefit of hindsight one standard format
486 is used which works with EVP_PKEY, RSA or DSA structures: though
487 it clearly returns an error if you try to read the wrong kind of key.
489 Added a -pubkey option to the 'x509' utility to output the public key.
490 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*() and add
491 EVP_PKEY_rset_*() functions that do the same as the EVP_PKEY_assign_*()
492 except they up the reference count of the added key (they don't "swallow"
496 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
497 CRLs would fail if the file contained no certificates or no CRLs:
498 added a new function to read in both types and return the number
499 read: this means that if none are read it will be an error. The
500 DER versions of the certificate and CRL reader would always fail
501 because it isn't possible to mix certificates and CRLs in DER format
502 without choking one or the other routine. Changed this to just read
503 a certificate: this is the best we can do. Also modified the code
504 in apps/verify.c to take notice of return codes: it was previously
505 attempting to read in certificates from NULL pointers and ignoring
506 any errors: this is one reason why the cert and CRL reader seemed
507 to work. It doesn't check return codes from the default certificate
508 routines: these may well fail if the certificates aren't installed.
511 *) Code to support otherName option in GeneralName.
514 *) First update to verify code. Change the verify utility
515 so it warns if it is passed a self signed certificate:
516 for consistency with the normal behaviour. X509_verify
517 has been modified to it will now verify a self signed
518 certificate if *exactly* the same certificate appears
519 in the store: it was previously impossible to trust a
520 single self signed certificate. This means that:
521 openssl verify ss.pem
522 now gives a warning about a self signed certificate but
523 openssl verify -CAfile ss.pem ss.pem
527 *) For servers, store verify_result in SSL_SESSION data structure
528 (and add it to external session representation).
529 This is needed when client certificate verifications fails,
530 but an application-provided verification callback (set by
531 SSL_CTX_set_cert_verify_callback) allows accepting the session
532 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
533 but returns 1): When the session is reused, we have to set
534 ssl->verify_result to the appropriate error code to avoid
536 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
538 *) Fix a bug in the new PKCS#7 code: it didn't consider the
539 case in PKCS7_dataInit() where the signed PKCS7 structure
540 didn't contain any existing data because it was being created.
541 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
543 *) Add a salt to the key derivation routines in enc.c. This
544 forms the first 8 bytes of the encrypted file. Also add a
545 -S option to allow a salt to be input on the command line.
548 *) New function X509_cmp(). Oddly enough there wasn't a function
549 to compare two certificates. We do this by working out the SHA1
550 hash and comparing that. X509_cmp() will be needed by the trust
554 *) SSL_get1_session() is like SSL_get_session(), but increments
555 the reference count in the SSL_SESSION returned.
556 [Geoff Thorpe <geoff@eu.c2.net>]
558 *) Fix for 'req': it was adding a null to request attributes.
559 Also change the X509_LOOKUP and X509_INFO code to handle
560 certificate auxiliary information.
563 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
567 *) Add the possibility to add extra information to the memory leak
568 detecting output, to form tracebacks, showing from where each
569 allocation was originated: CRYPTO_push_info("constant string") adds
570 the string plus current file name and line number to a per-thread
571 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
572 is like calling CYRPTO_pop_info() until the stack is empty.
573 Also updated memory leak detection code to be multi-thread-safe.
576 *) Add options -text and -noout to pkcs7 utility and delete the
577 encryption options which never did anything. Update docs.
580 *) Add options to some of the utilities to allow the pass phrase
581 to be included on either the command line (not recommended on
582 OSes like Unix) or read from the environment. Update the
583 manpages and fix a few bugs.
586 *) Add a few manpages for some of the openssl commands.
589 *) Fix the -revoke option in ca. It was freeing up memory twice,
590 leaking and not finding already revoked certificates.
593 *) Extensive changes to support certificate auxiliary information.
594 This involves the use of X509_CERT_AUX structure and X509_AUX
595 functions. An X509_AUX function such as PEM_read_X509_AUX()
596 can still read in a certificate file in the usual way but it
597 will also read in any additional "auxiliary information". By
598 doing things this way a fair degree of compatibility can be
599 retained: existing certificates can have this information added
600 using the new 'x509' options.
602 Current auxiliary information includes an "alias" and some trust
603 settings. The trust settings will ultimately be used in enhanced
604 certificate chain verification routines: currently a certificate
605 can only be trusted if it is self signed and then it is trusted
609 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
610 The problem was that one of the replacement routines had not been working
611 since SSLeay releases. For now the offending routine has been replaced
612 with non-optimised assembler. Even so, this now gives around 95%
613 performance improvement for 1024 bit RSA signs.
616 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
617 handling. Most clients have the effective key size in bits equal to
618 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
619 A few however don't do this and instead use the size of the decrypted key
620 to determine the RC2 key length and the AlgorithmIdentifier to determine
621 the effective key length. In this case the effective key length can still
622 be 40 bits but the key length can be 168 bits for example. This is fixed
623 by manually forcing an RC2 key into the EVP_PKEY structure because the
624 EVP code can't currently handle unusual RC2 key sizes: it always assumes
625 the key length and effective key length are equal.
628 *) Add a bunch of functions that should simplify the creation of
629 X509_NAME structures. Now you should be able to do:
630 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
631 and have it automatically work out the correct field type and fill in
632 the structures. The more adventurous can try:
633 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
634 and it will (hopefully) work out the correct multibyte encoding.
637 *) Change the 'req' utility to use the new field handling and multibyte
638 copy routines. Before the DN field creation was handled in an ad hoc
639 way in req, ca, and x509 which was rather broken and didn't support
640 BMPStrings or UTF8Strings. Since some software doesn't implement
641 BMPStrings or UTF8Strings yet, they can be enabled using the config file
642 using the dirstring_type option. See the new comment in the default
643 openssl.cnf for more info.
646 *) Make crypto/rand/md_rand.c more robust:
647 - Assure unique random numbers after fork().
648 - Make sure that concurrent threads access the global counter and
649 md serializably so that we never lose entropy in them
650 or use exactly the same state in multiple threads.
651 Access to the large state is not always serializable because
652 the additional locking could be a performance killer, and
653 md should be large enough anyway.
656 *) New file apps/app_rand.c with commonly needed functionality
657 for handling the random seed file.
659 Use the random seed file in some applications that previously did not:
661 dsaparam -genkey (which also ignored its '-rand' option),
665 Except on systems with /dev/urandom, it is crucial to have a random
666 seed file at least for key creation, DSA signing, and for DH exchanges;
667 for RSA signatures we could do without one.
669 gendh and gendsa (unlike genrsa) used to read only the first byte
670 of each file listed in the '-rand' option. The function as previously
671 found in genrsa is now in app_rand.c and is used by all programs
672 that support '-rand'.
675 *) In RAND_write_file, use mode 0600 for creating files;
676 don't just chmod when it may be too late.
679 *) Report an error from X509_STORE_load_locations
680 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
683 *) New function ASN1_mbstring_copy() this copies a string in either
684 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
685 into an ASN1_STRING type. A mask of permissible types is passed
686 and it chooses the "minimal" type to use or an error if not type
690 *) Add function equivalents to the various macros in asn1.h. The old
691 macros are retained with an M_ prefix. Code inside the library can
692 use the M_ macros. External code (including the openssl utility)
693 should *NOT* in order to be "shared library friendly".
696 *) Add various functions that can check a certificate's extensions
697 to see if it usable for various purposes such as SSL client,
698 server or S/MIME and CAs of these types. This is currently
699 VERY EXPERIMENTAL but will ultimately be used for certificate chain
700 verification. Also added a -purpose flag to x509 utility to
701 print out all the purposes.
704 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
708 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
709 for, obtain and decode and extension and obtain its critical flag.
710 This allows all the necessary extension code to be handled in a
711 single function call.
714 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
715 platforms. See crypto/rc4/rc4_enc.c for further details.
718 *) New -noout option to asn1parse. This causes no output to be produced
719 its main use is when combined with -strparse and -out to extract data
720 from a file (which may not be in ASN.1 format).
723 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
724 when producing the local key id.
725 [Richard Levitte <levitte@stacken.kth.se>]
727 *) New option -dhparam in s_server. This allows a DH parameter file to be
728 stated explicitly. If it is not stated then it tries the first server
729 certificate file. The previous behaviour hard coded the filename
733 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
734 a public key to be input or output. For example:
735 openssl rsa -in key.pem -pubout -out pubkey.pem
736 Also added necessary DSA public key functions to handle this.
739 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
740 in the message. This was handled by allowing
741 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
742 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
744 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
745 to the end of the strings whereas this didn't. This would cause problems
746 if strings read with d2i_ASN1_bytes() were later modified.
747 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
749 *) Fix for base64 decode bug. When a base64 bio reads only one line of
750 data and it contains EOF it will end up returning an error. This is
751 caused by input 46 bytes long. The cause is due to the way base64
752 BIOs find the start of base64 encoded data. They do this by trying a
753 trial decode on each line until they find one that works. When they
754 do a flag is set and it starts again knowing it can pass all the
755 data directly through the decoder. Unfortunately it doesn't reset
756 the context it uses. This means that if EOF is reached an attempt
757 is made to pass two EOFs through the context and this causes the
758 resulting error. This can also cause other problems as well. As is
759 usual with these problems it takes *ages* to find and the fix is
760 trivial: move one line.
761 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
763 *) Ugly workaround to get s_client and s_server working under Windows. The
764 old code wouldn't work because it needed to select() on sockets and the
765 tty (for keypresses and to see if data could be written). Win32 only
766 supports select() on sockets so we select() with a 1s timeout on the
767 sockets and then see if any characters are waiting to be read, if none
768 are present then we retry, we also assume we can always write data to
769 the tty. This isn't nice because the code then blocks until we've
770 received a complete line of data and it is effectively polling the
771 keyboard at 1s intervals: however it's quite a bit better than not
772 working at all :-) A dedicated Windows application might handle this
773 with an event loop for example.
776 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
777 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
778 will be called when RSA_sign() and RSA_verify() are used. This is useful
779 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
780 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
781 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
782 This necessitated the support of an extra signature type NID_md5_sha1
783 for SSL signatures and modifications to the SSL library to use it instead
784 of calling RSA_public_decrypt() and RSA_private_encrypt().
787 *) Add new -verify -CAfile and -CApath options to the crl program, these
788 will lookup a CRL issuers certificate and verify the signature in a
789 similar way to the verify program. Tidy up the crl program so it
790 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
791 less strict. It will now permit CRL extensions even if it is not
792 a V2 CRL: this will allow it to tolerate some broken CRLs.
795 *) Initialize all non-automatic variables each time one of the openssl
796 sub-programs is started (this is necessary as they may be started
797 multiple times from the "OpenSSL>" prompt).
798 [Lennart Bang, Bodo Moeller]
800 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
801 removing all other RSA functionality (this is what NO_RSA does). This
802 is so (for example) those in the US can disable those operations covered
803 by the RSA patent while allowing storage and parsing of RSA keys and RSA
807 *) Non-copying interface to BIO pairs.
808 (still largely untested)
811 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
812 ASCII string. This was handled independently in various places before.
815 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
816 UTF8 strings a character at a time.
819 *) Use client_version from client hello to select the protocol
820 (s23_srvr.c) and for RSA client key exchange verification
821 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
824 *) Add various utility functions to handle SPKACs, these were previously
825 handled by poking round in the structure internals. Added new function
826 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
827 print, verify and generate SPKACs. Based on an original idea from
828 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
831 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
834 *) Allow the config file extension section to be overwritten on the
835 command line. Based on an original idea from Massimiliano Pala
836 <madwolf@comune.modena.it>. The new option is called -extensions
837 and can be applied to ca, req and x509. Also -reqexts to override
838 the request extensions in req and -crlexts to override the crl extensions
842 *) Add new feature to the SPKAC handling in ca. Now you can include
843 the same field multiple times by preceding it by "XXXX." for example:
846 this is the same syntax as used in the req config file.
849 *) Allow certificate extensions to be added to certificate requests. These
850 are specified in a 'req_extensions' option of the req section of the
851 config file. They can be printed out with the -text option to req but
852 are otherwise ignored at present.
855 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
856 data read consists of only the final block it would not decrypted because
857 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
858 A misplaced 'break' also meant the decrypted final block might not be
859 copied until the next read.
862 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
863 a few extra parameters to the DH structure: these will be useful if
864 for example we want the value of 'q' or implement X9.42 DH.
867 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
868 provides hooks that allow the default DSA functions or functions on a
869 "per key" basis to be replaced. This allows hardware acceleration and
870 hardware key storage to be handled without major modification to the
871 library. Also added low level modexp hooks and CRYPTO_EX structure and
872 associated functions.
875 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
876 as "read only": it can't be written to and the buffer it points to will
877 not be freed. Reading from a read only BIO is much more efficient than
878 a normal memory BIO. This was added because there are several times when
879 an area of memory needs to be read from a BIO. The previous method was
880 to create a memory BIO and write the data to it, this results in two
881 copies of the data and an O(n^2) reading algorithm. There is a new
882 function BIO_new_mem_buf() which creates a read only memory BIO from
883 an area of memory. Also modified the PKCS#7 routines to use read only
887 *) Bugfix: ssl23_get_client_hello did not work properly when called in
888 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
889 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
890 but a retry condition occured while trying to read the rest.
893 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
894 NID_pkcs7_encrypted by default: this was wrong since this should almost
895 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
896 the encrypted data type: this is a more sensible place to put it and it
897 allows the PKCS#12 code to be tidied up that duplicated this
901 *) Changed obj_dat.pl script so it takes its input and output files on
902 the command line. This should avoid shell escape redirection problems
906 *) Initial support for certificate extension requests, these are included
907 in things like Xenroll certificate requests. Included functions to allow
908 extensions to be obtained and added.
911 *) -crlf option to s_client and s_server for sending newlines as
912 CRLF (as required by many protocols).
915 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
917 *) Install libRSAglue.a when OpenSSL is built with RSAref.
918 [Ralf S. Engelschall]
920 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
921 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
923 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
927 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
928 DH parameters/keys (q is lost during that conversion, but the resulting
929 DH parameters contain its length).
931 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
932 much faster than DH_generate_parameters (which creates parameters
933 where p = 2*q + 1), and also the smaller q makes DH computations
934 much more efficient (160-bit exponentiation instead of 1024-bit
935 exponentiation); so this provides a convenient way to support DHE
936 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
937 utter importance to use
938 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
940 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
941 when such DH parameters are used, because otherwise small subgroup
942 attacks may become possible!
945 *) Avoid memory leak in i2d_DHparams.
948 *) Allow the -k option to be used more than once in the enc program:
949 this allows the same encrypted message to be read by multiple recipients.
952 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
953 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
954 it will always use the numerical form of the OID, even if it has a short
958 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
959 method only got called if p,q,dmp1,dmq1,iqmp components were present,
960 otherwise bn_mod_exp was called. In the case of hardware keys for example
961 no private key components need be present and it might store extra data
962 in the RSA structure, which cannot be accessed from bn_mod_exp.
963 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
964 private key operations.
967 *) Added support for SPARC Linux.
970 *) pem_password_cb function type incompatibly changed from
971 typedef int pem_password_cb(char *buf, int size, int rwflag);
973 ....(char *buf, int size, int rwflag, void *userdata);
974 so that applications can pass data to their callbacks:
975 The PEM[_ASN1]_{read,write}... functions and macros now take an
976 additional void * argument, which is just handed through whenever
977 the password callback is called.
978 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
980 New function SSL_CTX_set_default_passwd_cb_userdata.
982 Compatibility note: As many C implementations push function arguments
983 onto the stack in reverse order, the new library version is likely to
984 interoperate with programs that have been compiled with the old
985 pem_password_cb definition (PEM_whatever takes some data that
986 happens to be on the stack as its last argument, and the callback
987 just ignores this garbage); but there is no guarantee whatsoever that
990 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
991 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
992 problems not only on Windows, but also on some Unix platforms.
993 To avoid problematic command lines, these definitions are now in an
994 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
995 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
998 *) MIPS III/IV assembler module is reimplemented.
1001 *) More DES library cleanups: remove references to srand/rand and
1002 delete an unused file.
1005 *) Add support for the the free Netwide assembler (NASM) under Win32,
1006 since not many people have MASM (ml) and it can be hard to obtain.
1007 This is currently experimental but it seems to work OK and pass all
1008 the tests. Check out INSTALL.W32 for info.
1011 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
1012 without temporary keys kept an extra copy of the server key,
1013 and connections with temporary keys did not free everything in case
1017 *) New function RSA_check_key and new openssl rsa option -check
1018 for verifying the consistency of RSA keys.
1019 [Ulf Moeller, Bodo Moeller]
1021 *) Various changes to make Win32 compile work:
1022 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
1023 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
1024 comparison" warnings.
1025 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
1028 *) Add a debugging option to PKCS#5 v2 key generation function: when
1029 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
1030 derived keys are printed to stderr.
1033 *) Copy the flags in ASN1_STRING_dup().
1034 [Roman E. Pavlov <pre@mo.msk.ru>]
1036 *) The x509 application mishandled signing requests containing DSA
1037 keys when the signing key was also DSA and the parameters didn't match.
1039 It was supposed to omit the parameters when they matched the signing key:
1040 the verifying software was then supposed to automatically use the CA's
1041 parameters if they were absent from the end user certificate.
1043 Omitting parameters is no longer recommended. The test was also
1044 the wrong way round! This was probably due to unusual behaviour in
1045 EVP_cmp_parameters() which returns 1 if the parameters match.
1046 This meant that parameters were omitted when they *didn't* match and
1047 the certificate was useless. Certificates signed with 'ca' didn't have
1049 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
1051 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
1052 The interface is as follows:
1053 Applications can use
1054 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
1055 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
1056 "off" is now the default.
1057 The library internally uses
1058 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
1059 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
1060 to disable memory-checking temporarily.
1062 Some inconsistent states that previously were possible (and were
1063 even the default) are now avoided.
1065 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
1066 with each memory chunk allocated; this is occasionally more helpful
1067 than just having a counter.
1069 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
1071 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
1075 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
1076 which largely parallels "options", but is for changing API behaviour,
1077 whereas "options" are about protocol behaviour.
1078 Initial "mode" flags are:
1080 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
1081 a single record has been written.
1082 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
1083 retries use the same buffer location.
1084 (But all of the contents must be
1088 *) Bugfix: SSL_set_mode ignored its parameter, only SSL_CTX_set_mode
1091 *) Fix problems with no-hmac etc.
1092 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
1094 *) New functions RSA_get_default_method(), RSA_set_method() and
1095 RSA_get_method(). These allows replacement of RSA_METHODs without having
1096 to mess around with the internals of an RSA structure.
1099 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
1100 Also really enable memory leak checks in openssl.c and in some
1102 [Chad C. Mulligan, Bodo Moeller]
1104 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
1105 up the length of negative integers. This has now been simplified to just
1106 store the length when it is first determined and use it later, rather
1107 than trying to keep track of where data is copied and updating it to
1109 [Steve Henson, reported by Brien Wheeler
1110 <bwheeler@authentica-security.com>]
1112 *) Add a new function PKCS7_signatureVerify. This allows the verification
1113 of a PKCS#7 signature but with the signing certificate passed to the
1114 function itself. This contrasts with PKCS7_dataVerify which assumes the
1115 certificate is present in the PKCS#7 structure. This isn't always the
1116 case: certificates can be omitted from a PKCS#7 structure and be
1117 distributed by "out of band" means (such as a certificate database).
1120 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
1121 function prototypes in pem.h, also change util/mkdef.pl to add the
1122 necessary function names.
1125 *) mk1mf.pl (used by Windows builds) did not properly read the
1126 options set by Configure in the top level Makefile, and Configure
1127 was not even able to write more than one option correctly.
1128 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
1131 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
1132 file to be loaded from a BIO or FILE pointer. The BIO version will
1133 for example allow memory BIOs to contain config info.
1136 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
1137 Whoever hopes to achieve shared-library compatibility across versions
1138 must use this, not the compile-time macro.
1139 (Exercise 0.9.4: Which is the minimum library version required by
1141 Note: All this applies only to multi-threaded programs, others don't
1145 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
1146 through a BIO pair triggered the default case, i.e.
1147 SSLerr(...,SSL_R_UNKNOWN_STATE).
1150 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
1151 can use the SSL library even if none of the specific BIOs is
1155 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
1156 for the encoded length.
1157 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
1159 *) Add initial documentation of the X509V3 functions.
1162 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
1163 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
1164 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
1165 secure PKCS#8 private key format with a high iteration count.
1168 *) Fix determination of Perl interpreter: A perl or perl5
1169 _directory_ in $PATH was also accepted as the interpreter.
1170 [Ralf S. Engelschall]
1172 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
1173 wrong with it but it was very old and did things like calling
1174 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
1178 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
1179 to use the new extension code.
1182 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
1183 with macros. This should make it easier to change their form, add extra
1184 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
1188 *) Add to configuration table a new entry that can specify an alternative
1189 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
1190 according to Mark Crispin <MRC@Panda.COM>.
1194 *) DES CBC did not update the IV. Weird.
1197 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
1198 Changing the behaviour of the former might break existing programs --
1199 where IV updating is needed, des_ncbc_encrypt can be used.
1202 *) When bntest is run from "make test" it drives bc to check its
1203 calculations, as well as internally checking them. If an internal check
1204 fails, it needs to cause bc to give a non-zero result or make test carries
1205 on without noticing the failure. Fixed.
1208 *) DES library cleanups.
1211 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
1212 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
1213 ciphers. NOTE: although the key derivation function has been verified
1214 against some published test vectors it has not been extensively tested
1215 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
1219 *) Instead of "mkdir -p", which is not fully portable, use new
1220 Perl script "util/mkdir-p.pl".
1223 *) Rewrite the way password based encryption (PBE) is handled. It used to
1224 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
1225 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
1226 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
1227 the 'parameter' field of the AlgorithmIdentifier is passed to the
1228 underlying key generation function so it must do its own ASN1 parsing.
1229 This has also changed the EVP_PBE_CipherInit() function which now has a
1230 'parameter' argument instead of literal salt and iteration count values
1231 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
1234 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
1235 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
1236 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
1237 KEY" because this clashed with PKCS#8 unencrypted string. Since this
1238 value was just used as a "magic string" and not used directly its
1239 value doesn't matter.
1242 *) Introduce some semblance of const correctness to BN. Shame C doesn't
1246 *) "linux-sparc64" configuration (ultrapenguin).
1247 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
1248 "linux-sparc" configuration.
1249 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
1251 *) config now generates no-xxx options for missing ciphers.
1254 *) Support the EBCDIC character set (work in progress).
1255 File ebcdic.c not yet included because it has a different license.
1256 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
1258 *) Support BS2000/OSD-POSIX.
1259 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
1261 *) Make callbacks for key generation use void * instead of char *.
1264 *) Make S/MIME samples compile (not yet tested).
1267 *) Additional typesafe stacks.
1270 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
1274 Changes between 0.9.3 and 0.9.3a [29 May 1999]
1276 *) New configuration variant "sco5-gcc".
1278 *) Updated some demos.
1279 [Sean O Riordain, Wade Scholine]
1281 *) Add missing BIO_free at exit of pkcs12 application.
1284 *) Fix memory leak in conf.c.
1287 *) Updates for Win32 to assembler version of MD5.
1290 *) Set #! path to perl in apps/der_chop to where we found it
1291 instead of using a fixed path.
1294 *) SHA library changes for irix64-mips4-cc.
1297 *) Improvements for VMS support.
1301 Changes between 0.9.2b and 0.9.3 [24 May 1999]
1303 *) Bignum library bug fix. IRIX 6 passes "make test" now!
1304 This also avoids the problems with SC4.2 and unpatched SC5.
1305 [Andy Polyakov <appro@fy.chalmers.se>]
1307 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
1308 These are required because of the typesafe stack would otherwise break
1309 existing code. If old code used a structure member which used to be STACK
1310 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
1311 sk_num or sk_value it would produce an error because the num, data members
1312 are not present in STACK_OF. Now it just produces a warning. sk_set
1313 replaces the old method of assigning a value to sk_value
1314 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
1315 that does this will no longer work (and should use sk_set instead) but
1316 this could be regarded as a "questionable" behaviour anyway.
1319 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
1320 correctly handle encrypted S/MIME data.
1323 *) Change type of various DES function arguments from des_cblock
1324 (which means, in function argument declarations, pointer to char)
1325 to des_cblock * (meaning pointer to array with 8 char elements),
1326 which allows the compiler to do more typechecking; it was like
1327 that back in SSLeay, but with lots of ugly casts.
1329 Introduce new type const_des_cblock.
1332 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
1333 problems: find RecipientInfo structure that matches recipient certificate
1334 and initialise the ASN1 structures properly based on passed cipher.
1337 *) Belatedly make the BN tests actually check the results.
1340 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
1341 to and from BNs: it was completely broken. New compilation option
1342 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
1343 key elements as negative integers.
1346 *) Reorganize and speed up MD5.
1347 [Andy Polyakov <appro@fy.chalmers.se>]
1350 [Richard Levitte <richard@levitte.org>]
1352 *) New option -out to asn1parse to allow the parsed structure to be
1353 output to a file. This is most useful when combined with the -strparse
1354 option to examine the output of things like OCTET STRINGS.
1357 *) Make SSL library a little more fool-proof by not requiring any longer
1358 that SSL_set_{accept,connect}_state be called before
1359 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
1360 in many applications because usually everything *appeared* to work as
1361 intended anyway -- now it really works as intended).
1364 *) Move openssl.cnf out of lib/.
1367 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
1368 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
1369 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
1370 [Ralf S. Engelschall]
1372 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
1373 handle PKCS#7 enveloped data properly.
1374 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
1376 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
1377 copying pointers. The cert_st handling is changed by this in
1378 various ways (and thus what used to be known as ctx->default_cert
1379 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
1380 any longer when s->cert does not give us what we need).
1381 ssl_cert_instantiate becomes obsolete by this change.
1382 As soon as we've got the new code right (possibly it already is?),
1383 we have solved a couple of bugs of the earlier code where s->cert
1384 was used as if it could not have been shared with other SSL structures.
1386 Note that using the SSL API in certain dirty ways now will result
1387 in different behaviour than observed with earlier library versions:
1388 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
1389 does not influence s as it used to.
1391 In order to clean up things more thoroughly, inside SSL_SESSION
1392 we don't use CERT any longer, but a new structure SESS_CERT
1393 that holds per-session data (if available); currently, this is
1394 the peer's certificate chain and, for clients, the server's certificate
1395 and temporary key. CERT holds only those values that can have
1396 meaningful defaults in an SSL_CTX.
1399 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
1400 from the internal representation. Various PKCS#7 fixes: remove some
1401 evil casts and set the enc_dig_alg field properly based on the signing
1405 *) Allow PKCS#12 password to be set from the command line or the
1406 environment. Let 'ca' get its config file name from the environment
1407 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
1411 *) Allow certificate policies extension to use an IA5STRING for the
1412 organization field. This is contrary to the PKIX definition but
1413 VeriSign uses it and IE5 only recognises this form. Document 'x509'
1417 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
1418 without disallowing inline assembler and the like for non-pedantic builds.
1421 *) Support Borland C++ builder.
1422 [Janez Jere <jj@void.si>, modified by Ulf Möller]
1427 *) SHA-1 cleanups and performance enhancements.
1428 [Andy Polyakov <appro@fy.chalmers.se>]
1430 *) Sparc v8plus assembler for the bignum library.
1431 [Andy Polyakov <appro@fy.chalmers.se>]
1433 *) Accept any -xxx and +xxx compiler options in Configure.
1436 *) Update HPUX configuration.
1439 *) Add missing sk_<type>_unshift() function to safestack.h
1440 [Ralf S. Engelschall]
1442 *) New function SSL_CTX_use_certificate_chain_file that sets the
1443 "extra_cert"s in addition to the certificate. (This makes sense
1444 only for "PEM" format files, as chains as a whole are not
1448 *) Support verify_depth from the SSL API.
1449 x509_vfy.c had what can be considered an off-by-one-error:
1450 Its depth (which was not part of the external interface)
1451 was actually counting the number of certificates in a chain;
1452 now it really counts the depth.
1455 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
1456 instead of X509err, which often resulted in confusing error
1457 messages since the error codes are not globally unique
1458 (e.g. an alleged error in ssl3_accept when a certificate
1459 didn't match the private key).
1461 *) New function SSL_CTX_set_session_id_context that allows to set a default
1462 value (so that you don't need SSL_set_session_id_context for each
1463 connection using the SSL_CTX).
1466 *) OAEP decoding bug fix.
1469 *) Support INSTALL_PREFIX for package builders, as proposed by
1473 *) New Configure options "threads" and "no-threads". For systems
1474 where the proper compiler options are known (currently Solaris
1475 and Linux), "threads" is the default.
1478 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
1481 *) Install various scripts to $(OPENSSLDIR)/misc, not to
1482 $(INSTALLTOP)/bin -- they shouldn't clutter directories
1483 such as /usr/local/bin.
1486 *) "make linux-shared" to build shared libraries.
1487 [Niels Poppe <niels@netbox.org>]
1489 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
1492 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
1493 extension adding in x509 utility.
1496 *) Remove NOPROTO sections and error code comments.
1499 *) Partial rewrite of the DEF file generator to now parse the ANSI
1503 *) New Configure options --prefix=DIR and --openssldir=DIR.
1506 *) Complete rewrite of the error code script(s). It is all now handled
1507 by one script at the top level which handles error code gathering,
1508 header rewriting and C source file generation. It should be much better
1509 than the old method: it now uses a modified version of Ulf's parser to
1510 read the ANSI prototypes in all header files (thus the old K&R definitions
1511 aren't needed for error creation any more) and do a better job of
1512 translating function codes into names. The old 'ASN1 error code imbedded
1513 in a comment' is no longer necessary and it doesn't use .err files which
1514 have now been deleted. Also the error code call doesn't have to appear all
1515 on one line (which resulted in some large lines...).
1518 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
1521 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
1522 0 (which usually indicates a closed connection), but continue reading.
1525 *) Fix some race conditions.
1528 *) Add support for CRL distribution points extension. Add Certificate
1529 Policies and CRL distribution points documentation.
1532 *) Move the autogenerated header file parts to crypto/opensslconf.h.
1535 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
1536 8 of keying material. Merlin has also confirmed interop with this fix
1537 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
1538 [Merlin Hughes <merlin@baltimore.ie>]
1540 *) Fix lots of warnings.
1541 [Richard Levitte <levitte@stacken.kth.se>]
1543 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
1544 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
1545 [Richard Levitte <levitte@stacken.kth.se>]
1547 *) Fix problems with sizeof(long) == 8.
1548 [Andy Polyakov <appro@fy.chalmers.se>]
1550 *) Change functions to ANSI C.
1553 *) Fix typos in error codes.
1554 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
1556 *) Remove defunct assembler files from Configure.
1559 *) SPARC v8 assembler BIGNUM implementation.
1560 [Andy Polyakov <appro@fy.chalmers.se>]
1562 *) Support for Certificate Policies extension: both print and set.
1563 Various additions to support the r2i method this uses.
1566 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
1567 return a const string when you are expecting an allocated buffer.
1570 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
1571 types DirectoryString and DisplayText.
1574 *) Add code to allow r2i extensions to access the configuration database,
1575 add an LHASH database driver and add several ctx helper functions.
1578 *) Fix an evil bug in bn_expand2() which caused various BN functions to
1579 fail when they extended the size of a BIGNUM.
1582 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
1583 support typesafe stack.
1586 *) Fix typo in SSL_[gs]et_options().
1587 [Nils Frostberg <nils@medcom.se>]
1589 *) Delete various functions and files that belonged to the (now obsolete)
1590 old X509V3 handling code.
1593 *) New Configure option "rsaref".
1596 *) Don't auto-generate pem.h.
1599 *) Introduce type-safe ASN.1 SETs.
1602 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
1603 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
1605 *) Introduce type-safe STACKs. This will almost certainly break lots of code
1606 that links with OpenSSL (well at least cause lots of warnings), but fear
1607 not: the conversion is trivial, and it eliminates loads of evil casts. A
1608 few STACKed things have been converted already. Feel free to convert more.
1609 In the fullness of time, I'll do away with the STACK type altogether.
1612 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
1613 specified in <certfile> by updating the entry in the index.txt file.
1614 This way one no longer has to edit the index.txt file manually for
1615 revoking a certificate. The -revoke option does the gory details now.
1616 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
1618 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
1619 `-text' option at all and this way the `-noout -text' combination was
1620 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
1621 [Ralf S. Engelschall]
1623 *) Make sure a corresponding plain text error message exists for the
1624 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
1625 verify callback function determined that a certificate was revoked.
1626 [Ralf S. Engelschall]
1628 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
1629 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
1630 all available cipers including rc5, which was forgotten until now.
1631 In order to let the testing shell script know which algorithms
1632 are available, a new (up to now undocumented) command
1633 "openssl list-cipher-commands" is used.
1636 *) Bugfix: s_client occasionally would sleep in select() when
1637 it should have checked SSL_pending() first.
1640 *) New functions DSA_do_sign and DSA_do_verify to provide access to
1641 the raw DSA values prior to ASN.1 encoding.
1644 *) Tweaks to Configure
1645 [Niels Poppe <niels@netbox.org>]
1647 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
1651 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
1654 *) New config option to avoid instructions that are illegal on the 80386.
1655 The default code is faster, but requires at least a 486.
1658 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
1659 SSL2_SERVER_VERSION (not used at all) macros, which are now the
1660 same as SSL2_VERSION anyway.
1663 *) New "-showcerts" option for s_client.
1666 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
1667 application. Various cleanups and fixes.
1670 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
1671 modify error routines to work internally. Add error codes and PBE init
1672 to library startup routines.
1675 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
1676 packing functions to asn1 and evp. Changed function names and error
1677 codes along the way.
1680 *) PKCS12 integration: and so it begins... First of several patches to
1681 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
1682 objects to objects.h
1685 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
1686 and display support for Thawte strong extranet extension.
1689 *) Add LinuxPPC support.
1690 [Jeff Dubrule <igor@pobox.org>]
1692 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
1693 bn_div_words in alpha.s.
1694 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
1696 *) Make sure the RSA OAEP test is skipped under -DRSAref because
1697 OAEP isn't supported when OpenSSL is built with RSAref.
1698 [Ulf Moeller <ulf@fitug.de>]
1700 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
1701 so they no longer are missing under -DNOPROTO.
1702 [Soren S. Jorvang <soren@t.dk>]
1705 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
1707 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
1708 doesn't work when the session is reused. Coming soon!
1711 *) Fix a security hole, that allows sessions to be reused in the wrong
1712 context thus bypassing client cert protection! All software that uses
1713 client certs and session caches in multiple contexts NEEDS PATCHING to
1714 allow session reuse! A fuller solution is in the works.
1715 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
1717 *) Some more source tree cleanups (removed obsolete files
1718 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
1719 permission on "config" script to be executable) and a fix for the INSTALL
1721 [Ulf Moeller <ulf@fitug.de>]
1723 *) Remove some legacy and erroneous uses of malloc, free instead of
1725 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
1727 *) Make rsa_oaep_test return non-zero on error.
1728 [Ulf Moeller <ulf@fitug.de>]
1730 *) Add support for native Solaris shared libraries. Configure
1731 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
1732 if someone would make that last step automatic.
1733 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
1735 *) ctx_size was not built with the right compiler during "make links". Fixed.
1738 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
1739 except NULL ciphers". This means the default cipher list will no longer
1740 enable NULL ciphers. They need to be specifically enabled e.g. with
1741 the string "DEFAULT:eNULL".
1744 *) Fix to RSA private encryption routines: if p < q then it would
1745 occasionally produce an invalid result. This will only happen with
1746 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
1749 *) Be less restrictive and allow also `perl util/perlpath.pl
1750 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
1751 because this way one can also use an interpreter named `perl5' (which is
1752 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
1753 installed as `perl').
1754 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
1756 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
1757 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
1759 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
1760 advapi32.lib to Win32 build and change the pem test comparision
1761 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
1762 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
1763 and crypto/des/ede_cbcm_enc.c.
1766 *) DES quad checksum was broken on big-endian architectures. Fixed.
1769 *) Comment out two functions in bio.h that aren't implemented. Fix up the
1770 Win32 test batch file so it (might) work again. The Win32 test batch file
1771 is horrible: I feel ill....
1774 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
1775 in e_os.h. Audit of header files to check ANSI and non ANSI
1776 sections: 10 functions were absent from non ANSI section and not exported
1777 from Windows DLLs. Fixed up libeay.num for new functions.
1780 *) Make `openssl version' output lines consistent.
1781 [Ralf S. Engelschall]
1783 *) Fix Win32 symbol export lists for BIO functions: Added
1784 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
1785 to ms/libeay{16,32}.def.
1786 [Ralf S. Engelschall]
1788 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
1789 fine under Unix and passes some trivial tests I've now added. But the
1790 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
1791 added to make sure no one expects that this stuff really works in the
1792 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
1793 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
1795 [Ralf S. Engelschall]
1797 *) Fix the generation of two part addresses in perl.
1798 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
1800 *) Add config entry for Linux on MIPS.
1801 [John Tobey <jtobey@channel1.com>]
1803 *) Make links whenever Configure is run, unless we are on Windoze.
1806 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
1807 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
1811 *) Add a useful kludge to allow package maintainers to specify compiler and
1812 other platforms details on the command line without having to patch the
1813 Configure script everytime: One now can use ``perl Configure
1814 <id>:<details>'', i.e. platform ids are allowed to have details appended
1815 to them (seperated by colons). This is treated as there would be a static
1816 pre-configured entry in Configure's %table under key <id> with value
1817 <details> and ``perl Configure <id>'' is called. So, when you want to
1818 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
1819 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
1820 now, which overrides the FreeBSD-elf entry on-the-fly.
1821 [Ralf S. Engelschall]
1823 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
1826 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
1827 on the `perl Configure ...' command line. This way one can compile
1828 OpenSSL libraries with Position Independent Code (PIC) which is needed
1829 for linking it into DSOs.
1830 [Ralf S. Engelschall]
1832 *) Remarkably, export ciphers were totally broken and no-one had noticed!
1836 *) Cleaned up the LICENSE document: The official contact for any license
1837 questions now is the OpenSSL core team under openssl-core@openssl.org.
1838 And add a paragraph about the dual-license situation to make sure people
1839 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
1840 to the OpenSSL toolkit.
1841 [Ralf S. Engelschall]
1843 *) General source tree makefile cleanups: Made `making xxx in yyy...'
1844 display consistent in the source tree and replaced `/bin/rm' by `rm'.
1845 Additonally cleaned up the `make links' target: Remove unnecessary
1846 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
1847 to speed processing and no longer clutter the display with confusing
1848 stuff. Instead only the actually done links are displayed.
1849 [Ralf S. Engelschall]
1851 *) Permit null encryption ciphersuites, used for authentication only. It used
1852 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
1853 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
1857 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
1858 signed attributes when verifying signatures (this would break them),
1859 the detached data encoding was wrong and public keys obtained using
1860 X509_get_pubkey() weren't freed.
1863 *) Add text documentation for the BUFFER functions. Also added a work around
1864 to a Win95 console bug. This was triggered by the password read stuff: the
1865 last character typed gets carried over to the next fread(). If you were
1866 generating a new cert request using 'req' for example then the last
1867 character of the passphrase would be CR which would then enter the first
1871 *) Added the new `Includes OpenSSL Cryptography Software' button as
1872 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
1873 button and can be used by applications based on OpenSSL to show the
1874 relationship to the OpenSSL project.
1875 [Ralf S. Engelschall]
1877 *) Remove confusing variables in function signatures in files
1878 ssl/ssl_lib.c and ssl/ssl.h.
1879 [Lennart Bong <lob@kulthea.stacken.kth.se>]
1881 *) Don't install bss_file.c under PREFIX/include/
1882 [Lennart Bong <lob@kulthea.stacken.kth.se>]
1884 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
1885 functions that return function pointers and has support for NT specific
1886 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
1887 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
1888 unsigned to signed types: this was killing the Win32 compile.
1891 *) Add new certificate file to stack functions,
1892 SSL_add_dir_cert_subjects_to_stack() and
1893 SSL_add_file_cert_subjects_to_stack(). These largely supplant
1894 SSL_load_client_CA_file(), and can be used to add multiple certs easily
1895 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
1896 This means that Apache-SSL and similar packages don't have to mess around
1897 to add as many CAs as they want to the preferred list.
1900 *) Experiment with doxygen documentation. Currently only partially applied to
1902 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
1903 openssl.doxy as the configuration file.
1906 *) Get rid of remaining C++-style comments which strict C compilers hate.
1907 [Ralf S. Engelschall, pointed out by Carlos Amengual]
1909 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
1910 compiled in by default: it has problems with large keys.
1913 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
1914 DH private keys and/or callback functions which directly correspond to
1915 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
1916 is needed for applications which have to configure certificates on a
1917 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
1919 For the RSA certificate situation is makes no difference, but
1920 for the DSA certificate situation this fixes the "no shared cipher"
1921 problem where the OpenSSL cipher selection procedure failed because the
1922 temporary keys were not overtaken from the context and the API provided
1923 no way to reconfigure them.
1924 The new functions now let applications reconfigure the stuff and they
1925 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
1926 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
1927 non-public-API function ssl_cert_instantiate() is used as a helper
1928 function and also to reduce code redundancy inside ssl_rsa.c.
1929 [Ralf S. Engelschall]
1931 *) Move s_server -dcert and -dkey options out of the undocumented feature
1932 area because they are useful for the DSA situation and should be
1933 recognized by the users.
1934 [Ralf S. Engelschall]
1936 *) Fix the cipher decision scheme for export ciphers: the export bits are
1937 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
1938 SSL_EXP_MASK. So, the original variable has to be used instead of the
1939 already masked variable.
1940 [Richard Levitte <levitte@stacken.kth.se>]
1942 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
1943 [Richard Levitte <levitte@stacken.kth.se>]
1945 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
1946 from `int' to `unsigned int' because it's a length and initialized by
1947 EVP_DigestFinal() which expects an `unsigned int *'.
1948 [Richard Levitte <levitte@stacken.kth.se>]
1950 *) Don't hard-code path to Perl interpreter on shebang line of Configure
1951 script. Instead use the usual Shell->Perl transition trick.
1952 [Ralf S. Engelschall]
1954 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
1955 (in addition to RSA certificates) to match the behaviour of `openssl dsa
1956 -noout -modulus' as it's already the case for `openssl rsa -noout
1957 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
1958 currently the public key is printed (a decision which was already done by
1959 `openssl dsa -modulus' in the past) which serves a similar purpose.
1960 Additionally the NO_RSA no longer completely removes the whole -modulus
1961 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
1963 [Ralf S. Engelschall]
1965 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
1966 BIO. See the source (crypto/evp/bio_ok.c) for more info.
1967 [Arne Ansper <arne@ats.cyber.ee>]
1969 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
1970 to be added. Now both 'req' and 'ca' can use new objects defined in the
1974 *) Add cool BIO that does syslog (or event log on NT).
1975 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
1977 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
1978 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
1979 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
1980 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
1983 *) Add preliminary config info for new extension code.
1986 *) Make RSA_NO_PADDING really use no padding.
1987 [Ulf Moeller <ulf@fitug.de>]
1989 *) Generate errors when private/public key check is done.
1992 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
1993 for some CRL extensions and new objects added.
1996 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
1997 key usage extension and fuller support for authority key id.
2000 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
2001 padding method for RSA, which is recommended for new applications in PKCS
2002 #1 v2.0 (RFC 2437, October 1998).
2003 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
2004 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
2005 against Bleichbacher's attack on RSA.
2006 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
2009 *) Updates to the new SSL compression code
2010 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
2012 *) Fix so that the version number in the master secret, when passed
2013 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
2014 (because the server will not accept higher), that the version number
2015 is 0x03,0x01, not 0x03,0x00
2016 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
2018 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
2019 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
2020 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
2023 *) Support for RAW extensions where an arbitrary extension can be
2024 created by including its DER encoding. See apps/openssl.cnf for
2028 *) Make sure latest Perl versions don't interpret some generated C array
2029 code as Perl array code in the crypto/err/err_genc.pl script.
2030 [Lars Weber <3weber@informatik.uni-hamburg.de>]
2032 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
2033 not many people have the assembler. Various Win32 compilation fixes and
2034 update to the INSTALL.W32 file with (hopefully) more accurate Win32
2038 *) Modify configure script 'Configure' to automatically create crypto/date.h
2039 file under Win32 and also build pem.h from pem.org. New script
2040 util/mkfiles.pl to create the MINFO file on environments that can't do a
2041 'make files': perl util/mkfiles.pl >MINFO should work.
2044 *) Major rework of DES function declarations, in the pursuit of correctness
2045 and purity. As a result, many evil casts evaporated, and some weirdness,
2046 too. You may find this causes warnings in your code. Zapping your evil
2047 casts will probably fix them. Mostly.
2050 *) Fix for a typo in asn1.h. Bug fix to object creation script
2051 obj_dat.pl. It considered a zero in an object definition to mean
2052 "end of object": none of the objects in objects.h have any zeros
2053 so it wasn't spotted.
2054 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
2056 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
2057 Masking (CBCM). In the absence of test vectors, the best I have been able
2058 to do is check that the decrypt undoes the encrypt, so far. Send me test
2059 vectors if you have them.
2062 *) Correct calculation of key length for export ciphers (too much space was
2063 allocated for null ciphers). This has not been tested!
2066 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
2067 message is now correct (it understands "crypto" and "ssl" on its
2068 command line). There is also now an "update" option. This will update
2069 the util/ssleay.num and util/libeay.num files with any new functions.
2071 perl util/mkdef.pl crypto ssl update
2072 it will update them.
2075 *) Overhauled the Perl interface (perl/*):
2076 - ported BN stuff to OpenSSL's different BN library
2077 - made the perl/ source tree CVS-aware
2078 - renamed the package from SSLeay to OpenSSL (the files still contain
2079 their history because I've copied them in the repository)
2080 - removed obsolete files (the test scripts will be replaced
2081 by better Test::Harness variants in the future)
2082 [Ralf S. Engelschall]
2084 *) First cut for a very conservative source tree cleanup:
2085 1. merge various obsolete readme texts into doc/ssleay.txt
2086 where we collect the old documents and readme texts.
2087 2. remove the first part of files where I'm already sure that we no
2088 longer need them because of three reasons: either they are just temporary
2089 files which were left by Eric or they are preserved original files where
2090 I've verified that the diff is also available in the CVS via "cvs diff
2091 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
2092 the crypto/md/ stuff).
2093 [Ralf S. Engelschall]
2095 *) More extension code. Incomplete support for subject and issuer alt
2096 name, issuer and authority key id. Change the i2v function parameters
2097 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
2098 what that's for :-) Fix to ASN1 macro which messed up
2099 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
2102 *) Preliminary support for ENUMERATED type. This is largely copied from the
2106 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
2107 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
2109 *) Make sure `make rehash' target really finds the `openssl' program.
2110 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
2112 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
2113 like to hear about it if this slows down other processors.
2116 *) Add CygWin32 platform information to Configure script.
2117 [Alan Batie <batie@aahz.jf.intel.com>]
2119 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
2120 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
2122 *) New program nseq to manipulate netscape certificate sequences
2125 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
2129 *) Fixes to BN code. Previously the default was to define BN_RECURSION
2130 but the BN code had some problems that would cause failures when
2131 doing certificate verification and some other functions.
2132 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
2134 *) Add ASN1 and PEM code to support netscape certificate sequences.
2137 *) Add ASN1 and PEM code to support netscape certificate sequences.
2140 *) Add several PKIX and private extended key usage OIDs.
2143 *) Modify the 'ca' program to handle the new extension code. Modify
2144 openssl.cnf for new extension format, add comments.
2147 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
2148 and add a sample to openssl.cnf so req -x509 now adds appropriate
2152 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
2153 error code, add initial support to X509_print() and x509 application.
2156 *) Takes a deep breath and start addding X509 V3 extension support code. Add
2157 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
2158 stuff is currently isolated and isn't even compiled yet.
2161 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
2162 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
2163 Removed the versions check from X509 routines when loading extensions:
2164 this allows certain broken certificates that don't set the version
2165 properly to be processed.
2168 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
2169 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
2170 can still be regenerated with "make depend".
2173 *) Spelling mistake in C version of CAST-128.
2174 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
2176 *) Changes to the error generation code. The perl script err-code.pl
2177 now reads in the old error codes and retains the old numbers, only
2178 adding new ones if necessary. It also only changes the .err files if new
2179 codes are added. The makefiles have been modified to only insert errors
2180 when needed (to avoid needlessly modifying header files). This is done
2181 by only inserting errors if the .err file is newer than the auto generated
2182 C file. To rebuild all the error codes from scratch (the old behaviour)
2183 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
2184 or delete all the .err files.
2187 *) CAST-128 was incorrectly implemented for short keys. The C version has
2188 been fixed, but is untested. The assembler versions are also fixed, but
2189 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
2190 to regenerate it if needed.
2191 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
2192 Hagino <itojun@kame.net>]
2194 *) File was opened incorrectly in randfile.c.
2195 [Ulf Möller <ulf@fitug.de>]
2197 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
2198 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
2199 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
2200 al: it's just almost always a UTCTime. Note this patch adds new error
2201 codes so do a "make errors" if there are problems.
2204 *) Correct Linux 1 recognition in config.
2205 [Ulf Möller <ulf@fitug.de>]
2207 *) Remove pointless MD5 hash when using DSA keys in ca.
2208 [Anonymous <nobody@replay.com>]
2210 *) Generate an error if given an empty string as a cert directory. Also
2211 generate an error if handed NULL (previously returned 0 to indicate an
2212 error, but didn't set one).
2213 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
2215 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
2218 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
2219 parameters. This was causing a warning which killed off the Win32 compile.
2222 *) Remove C++ style comments from crypto/bn/bn_local.h.
2223 [Neil Costigan <neil.costigan@celocom.com>]
2225 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
2226 based on a text string, looking up short and long names and finally
2227 "dot" format. The "dot" format stuff didn't work. Added new function
2228 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
2229 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
2230 OID is not part of the table.
2233 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
2234 X509_LOOKUP_by_alias().
2237 *) Sort openssl functions by name.
2240 *) Get the gendsa program working (hopefully) and add it to app list. Remove
2241 encryption from sample DSA keys (in case anyone is interested the password
2245 *) Make _all_ *_free functions accept a NULL pointer.
2246 [Frans Heymans <fheymans@isaserver.be>]
2248 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
2250 [Anonymous <nobody@replay.com>]
2252 *) s_server should send the CAfile as acceptable CAs, not its own cert.
2253 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
2255 *) Don't blow it for numeric -newkey arguments to apps/req.
2256 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
2258 *) Temp key "for export" tests were wrong in s3_srvr.c.
2259 [Anonymous <nobody@replay.com>]
2261 *) Add prototype for temp key callback functions
2262 SSL_CTX_set_tmp_{rsa,dh}_callback().
2265 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
2266 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
2269 *) X509_name_add_entry() freed the wrong thing after an error.
2270 [Arne Ansper <arne@ats.cyber.ee>]
2272 *) rsa_eay.c would attempt to free a NULL context.
2273 [Arne Ansper <arne@ats.cyber.ee>]
2275 *) BIO_s_socket() had a broken should_retry() on Windoze.
2276 [Arne Ansper <arne@ats.cyber.ee>]
2278 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
2279 [Arne Ansper <arne@ats.cyber.ee>]
2281 *) Make sure the already existing X509_STORE->depth variable is initialized
2282 in X509_STORE_new(), but document the fact that this variable is still
2283 unused in the certificate verification process.
2284 [Ralf S. Engelschall]
2286 *) Fix the various library and apps files to free up pkeys obtained from
2287 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
2290 *) Fix reference counting in X509_PUBKEY_get(). This makes
2291 demos/maurice/example2.c work, amongst others, probably.
2292 [Steve Henson and Ben Laurie]
2294 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
2295 `openssl' and second, the shortcut symlinks for the `openssl <command>'
2296 are no longer created. This way we have a single and consistent command
2297 line interface `openssl <command>', similar to `cvs <command>'.
2298 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
2300 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
2301 BIT STRING wrapper always have zero unused bits.
2304 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
2307 *) Make the top-level INSTALL documentation easier to understand.
2310 *) Makefiles updated to exit if an error occurs in a sub-directory
2311 make (including if user presses ^C) [Paul Sutton]
2313 *) Make Montgomery context stuff explicit in RSA data structure.
2316 *) Fix build order of pem and err to allow for generated pem.h.
2319 *) Fix renumbering bug in X509_NAME_delete_entry().
2322 *) Enhanced the err-ins.pl script so it makes the error library number
2323 global and can add a library name. This is needed for external ASN1 and
2324 other error libraries.
2327 *) Fixed sk_insert which never worked properly.
2330 *) Fix ASN1 macros so they can handle indefinite length construted
2331 EXPLICIT tags. Some non standard certificates use these: they can now
2335 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
2336 into a single doc/ssleay.txt bundle. This way the information is still
2337 preserved but no longer messes up this directory. Now it's new room for
2338 the new set of documenation files.
2339 [Ralf S. Engelschall]
2341 *) SETs were incorrectly DER encoded. This was a major pain, because they
2342 shared code with SEQUENCEs, which aren't coded the same. This means that
2343 almost everything to do with SETs or SEQUENCEs has either changed name or
2344 number of arguments.
2345 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
2347 *) Fix test data to work with the above.
2350 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
2351 was already fixed by Eric for 0.9.1 it seems.
2352 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
2354 *) Autodetect FreeBSD3.
2357 *) Fix various bugs in Configure. This affects the following platforms:
2361 unixware-2.0-pentium
2365 *) Eliminate generated files from CVS. Reorder tests to regenerate files
2366 before they are needed.
2369 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
2373 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
2375 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
2376 changed SSLeay to OpenSSL in version strings.
2377 [Ralf S. Engelschall]
2379 *) Some fixups to the top-level documents.
2382 *) Fixed the nasty bug where rsaref.h was not found under compile-time
2383 because the symlink to include/ was missing.
2384 [Ralf S. Engelschall]
2386 *) Incorporated the popular no-RSA/DSA-only patches
2387 which allow to compile a RSA-free SSLeay.
2388 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
2390 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
2391 when "ssleay" is still not found.
2392 [Ralf S. Engelschall]
2394 *) Added more platforms to Configure: Cray T3E, HPUX 11,
2395 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
2397 *) Updated the README file.
2398 [Ralf S. Engelschall]
2400 *) Added various .cvsignore files in the CVS repository subdirs
2401 to make a "cvs update" really silent.
2402 [Ralf S. Engelschall]
2404 *) Recompiled the error-definition header files and added
2405 missing symbols to the Win32 linker tables.
2406 [Ralf S. Engelschall]
2408 *) Cleaned up the top-level documents;
2409 o new files: CHANGES and LICENSE
2410 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
2411 o merged COPYRIGHT into LICENSE
2412 o removed obsolete TODO file
2413 o renamed MICROSOFT to INSTALL.W32
2414 [Ralf S. Engelschall]
2416 *) Removed dummy files from the 0.9.1b source tree:
2417 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
2418 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
2419 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
2420 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
2421 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
2422 [Ralf S. Engelschall]
2424 *) Added various platform portability fixes.
2427 *) The Genesis of the OpenSSL rpject:
2428 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
2429 Young and Tim J. Hudson created while they were working for C2Net until
2431 [The OpenSSL Project]
2434 Changes between 0.9.0b and 0.9.1b [not released]
2436 *) Updated a few CA certificates under certs/
2439 *) Changed some BIGNUM api stuff.
2442 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
2443 DGUX x86, Linux Alpha, etc.
2446 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
2447 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
2451 *) Add -strparse option to asn1pars program which parses nested
2453 [Dr Stephen Henson <shenson@bigfoot.com>]
2455 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
2458 *) DSA fix for "ca" program.
2461 *) Added "-genkey" option to "dsaparam" program.
2464 *) Added RIPE MD160 (rmd160) message digest.
2467 *) Added -a (all) option to "ssleay version" command.
2470 *) Added PLATFORM define which is the id given to Configure.
2473 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
2476 *) Extended the ASN.1 parser routines.
2479 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
2482 *) Added a BN_CTX to the BN library.
2485 *) Fixed the weak key values in DES library
2488 *) Changed API in EVP library for cipher aliases.
2491 *) Added support for RC2/64bit cipher.
2494 *) Converted the lhash library to the crypto/mem.c functions.
2497 *) Added more recognized ASN.1 object ids.
2500 *) Added more RSA padding checks for SSL/TLS.
2503 *) Added BIO proxy/filter functionality.
2506 *) Added extra_certs to SSL_CTX which can be used
2507 send extra CA certificates to the client in the CA cert chain sending
2508 process. It can be configured with SSL_CTX_add_extra_chain_cert().
2511 *) Now Fortezza is denied in the authentication phase because
2512 this is key exchange mechanism is not supported by SSLeay at all.
2515 *) Additional PKCS1 checks.
2518 *) Support the string "TLSv1" for all TLS v1 ciphers.
2521 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
2522 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
2525 *) Fixed a few memory leaks.
2528 *) Fixed various code and comment typos.
2531 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
2532 bytes sent in the client random.
2533 [Edward Bishop <ebishop@spyglass.com>]
projects / openssl.git / blob