--- /dev/null
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# Poly1305 hash for MIPS64.
+#
+# May 2016
+#
+# Numbers are cycles per processed byte with poly1305_blocks alone.
+#
+# IALU/gcc
+# R1x000 5.64/+120% (big-endian)
+# Octeon II 3.80/+280% (little-endian)
+
+######################################################################
+# There is a number of MIPS ABI in use, O32 and N32/64 are most
+# widely used. Then there is a new contender: NUBI. It appears that if
+# one picks the latter, it's possible to arrange code in ABI neutral
+# manner. Therefore let's stick to NUBI register layout:
+#
+($zero,$at,$t0,$t1,$t2)=map("\$$_",(0..2,24,25));
+($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
+($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7,$s8,$s9,$s10,$s11)=map("\$$_",(12..23));
+($gp,$tp,$sp,$fp,$ra)=map("\$$_",(3,28..31));
+#
+# The return value is placed in $a0. Following coding rules facilitate
+# interoperability:
+#
+# - never ever touch $tp, "thread pointer", former $gp [o32 can be
+# excluded from the rule, because it's specified volatile];
+# - copy return value to $t0, former $v0 [or to $a0 if you're adapting
+# old code];
+# - on O32 populate $a4-$a7 with 'lw $aN,4*N($sp)' if necessary;
+#
+# For reference here is register layout for N32/64 MIPS ABIs:
+#
+# ($zero,$at,$v0,$v1)=map("\$$_",(0..3));
+# ($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
+# ($t0,$t1,$t2,$t3,$t8,$t9)=map("\$$_",(12..15,24,25));
+# ($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7)=map("\$$_",(16..23));
+# ($gp,$sp,$fp,$ra)=map("\$$_",(28..31));
+#
+# <appro@openssl.org>
+#
+######################################################################
+
+$flavour = shift || "o32"; # supported flavours are o32,n32,64,nubi32,nubi64
+
+die "MIPS64 only" unless ($flavour =~ /64|n32/i);
+
+$v0 = ($flavour =~ /nubi/i) ? $a0 : $t0;
+$SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? "0x0003f000" : "0x00030000";
+
+($ctx,$inp,$len,$padbit) = ($a0,$a1,$a2,$a3);
+($in0,$in1,$tmp0,$tmp1,$tmp2,$tmp3,$tmp4) = ($a4,$a5,$a6,$a7,$at,$t0,$t1);
+
+$code.=<<___;
+#ifdef MIPSEB
+# define MSB 0
+# define LSB 7
+#else
+# define MSB 7
+# define LSB 0
+#endif
+
+.text
+.set noat
+.set noreorder
+
+.align 5
+.globl poly1305_init
+.ent poly1305_init
+poly1305_init:
+ .frame $sp,0,$ra
+ .set reorder
+
+ sd $zero,0($ctx)
+ sd $zero,8($ctx)
+ sd $zero,16($ctx)
+
+ beqz $inp,.Lno_key
+
+ ldl $in0,0+MSB($inp)
+ ldl $in1,8+MSB($inp)
+ ldr $in0,0+LSB($inp)
+ ldr $in1,8+LSB($inp)
+#ifdef MIPSEB
+# if defined(_MIPS_ARCH_MIPS64R2)
+ dsbh $in0,$in0 # byte swap
+ dsbh $in1,$in1
+ dshd $in0,$in0
+ dshd $in1,$in1
+# else
+ ori $tmp0,$zero,0xFF
+ dsll $tmp2,$tmp0,32
+ or $tmp0,$tmp2 # 0x000000FF000000FF
+
+ and $tmp1,$in0,$tmp0 # byte swap
+ and $tmp3,$in1,$tmp0
+ dsrl $tmp2,$in0,24
+ dsrl $tmp4,$in1,24
+ dsll $tmp1,24
+ dsll $tmp3,24
+ and $tmp2,$tmp0
+ and $tmp4,$tmp0
+ dsll $tmp0,8 # 0x0000FF000000FF00
+ or $tmp1,$tmp2
+ or $tmp3,$tmp4
+ and $tmp2,$in0,$tmp0
+ and $tmp4,$in1,$tmp0
+ dsrl $in0,8
+ dsrl $in1,8
+ dsll $tmp2,8
+ dsll $tmp4,8
+ and $in0,$tmp0
+ and $in1,$tmp0
+ or $tmp1,$tmp2
+ or $tmp3,$tmp4
+ or $in0,$tmp1
+ or $in1,$tmp3
+ dsrl $tmp1,$in0,32
+ dsrl $tmp3,$in1,32
+ dsll $in0,32
+ dsll $in1,32
+ or $in0,$tmp1
+ or $in1,$tmp3
+# endif
+#endif
+ li $tmp0,1
+ dsll $tmp0,32
+ daddiu $tmp0,-63
+ dsll $tmp0,28
+ daddiu $tmp0,-1 # 0ffffffc0fffffff
+
+ and $in0,$tmp0
+ daddiu $tmp0,-3 # 0ffffffc0ffffffc
+ and $in1,$tmp0
+
+ sd $in0,24($ctx)
+ dsrl $tmp0,$in1,2
+ sd $in1,32($ctx)
+ daddu $tmp0,$in1 # s1 = r1 + (r1 >> 2)
+ sd $tmp0,40($ctx)
+
+.Lno_key:
+ li $v0,0 # return 0
+ jr $ra
+.end poly1305_init
+___
+{
+my ($h0,$h1,$h2,$r0,$r1,$s1,$d0,$d1,$d2) =
+ ($s0,$s1,$s2,$s3,$s4,$s5,$in0,$in1,$t2);
+
+$code.=<<___;
+.align 5
+.globl poly1305_blocks
+.ent poly1305_blocks
+poly1305_blocks:
+ .set noreorder
+ dsrl $len,4 # number of complete blocks
+ beqz $len,.Lno_data
+ nop
+
+ .frame $sp,8*8,$ra
+ .mask $SAVED_REGS_MASK,-8
+ dsub $sp,8*8
+ sd $s5,0($sp)
+ sd $s4,8($sp)
+___
+$code.=<<___ if ($flavour =~ /nubi/i); # optimize non-nubi prologue
+ sd $s3,16($sp)
+ sd $s2,24($sp)
+ sd $s1,32($sp)
+ sd $s0,40($sp)
+___
+$code.=<<___;
+ .set reorder
+
+ ld $h0,0($ctx) # load hash value
+ ld $h1,8($ctx)
+ ld $h2,16($ctx)
+
+ ld $r0,24($ctx) # load key
+ ld $r1,32($ctx)
+ ld $s1,40($ctx)
+
+.Loop:
+ ldl $in0,0+MSB($inp) # load input
+ ldl $in1,8+MSB($inp)
+ ldr $in0,0+LSB($inp)
+ daddiu $len,-1
+ ldr $in1,8+LSB($inp)
+ daddiu $inp,16
+#ifdef MIPSEB
+# if defined(_MIPS_ARCH_MIPS64R2)
+ dsbh $in0,$in0 # byte swap
+ dsbh $in1,$in1
+ dshd $in0,$in0
+ dshd $in1,$in1
+# else
+ ori $tmp0,$zero,0xFF
+ dsll $tmp2,$tmp0,32
+ or $tmp0,$tmp2 # 0x000000FF000000FF
+
+ and $tmp1,$in0,$tmp0 # byte swap
+ and $tmp3,$in1,$tmp0
+ dsrl $tmp2,$in0,24
+ dsrl $tmp4,$in1,24
+ dsll $tmp1,24
+ dsll $tmp3,24
+ and $tmp2,$tmp0
+ and $tmp4,$tmp0
+ dsll $tmp0,8 # 0x0000FF000000FF00
+ or $tmp1,$tmp2
+ or $tmp3,$tmp4
+ and $tmp2,$in0,$tmp0
+ and $tmp4,$in1,$tmp0
+ dsrl $in0,8
+ dsrl $in1,8
+ dsll $tmp2,8
+ dsll $tmp4,8
+ and $in0,$tmp0
+ and $in1,$tmp0
+ or $tmp1,$tmp2
+ or $tmp3,$tmp4
+ or $in0,$tmp1
+ or $in1,$tmp3
+ dsrl $tmp1,$in0,32
+ dsrl $tmp3,$in1,32
+ dsll $in0,32
+ dsll $in1,32
+ or $in0,$tmp1
+ or $in1,$tmp3
+# endif
+#endif
+ daddu $h0,$in0 # accumulate input
+ daddu $h1,$in1
+ sltu $tmp0,$h0,$in0
+ sltu $tmp1,$h1,$in1
+ daddu $h1,$tmp0
+
+ dmultu $r0,$h0 # h0*r0
+ daddu $h2,$padbit
+ sltu $tmp0,$h1,$tmp0
+ mflo $d0
+ mfhi $d1
+
+ dmultu $s1,$h1 # h1*5*r1
+ daddu $tmp0,$tmp1
+ daddu $h2,$tmp0
+ mflo $tmp0
+ mfhi $tmp1
+
+ dmultu $r1,$h0 # h0*r1
+ daddu $d0,$tmp0
+ daddu $d1,$tmp1
+ mflo $tmp2
+ mfhi $d2
+ sltu $tmp0,$d0,$tmp0
+ daddu $d1,$tmp0
+
+ dmultu $r0,$h1 # h1*r0
+ daddu $d1,$tmp2
+ sltu $tmp2,$d1,$tmp2
+ mflo $tmp0
+ mfhi $tmp1
+ daddu $d2,$tmp2
+
+ dmultu $s1,$h2 # h2*5*r1
+ daddu $d1,$tmp0
+ daddu $d2,$tmp1
+ mflo $tmp2
+
+ dmultu $r0,$h2 # h2*r0
+ sltu $tmp0,$d1,$tmp0
+ daddu $d2,$tmp0
+ mflo $tmp3
+
+ daddu $d1,$tmp2
+ daddu $d2,$tmp3
+ sltu $tmp2,$d1,$tmp2
+ daddu $d2,$tmp2
+
+ li $tmp0,-4 # final reduction
+ and $tmp0,$d2
+ dsrl $tmp1,$d2,2
+ andi $h2,$d2,3
+ daddu $tmp0,$tmp1
+ daddu $h0,$d0,$tmp0
+ sltu $tmp0,$h0,$tmp0
+ daddu $h1,$d1,$tmp0
+ sltu $tmp0,$h1,$tmp0
+ daddu $h2,$h2,$tmp0
+
+ bnez $len,.Loop
+
+ sd $h0,0($ctx) # store hash value
+ sd $h1,8($ctx)
+ sd $h2,16($ctx)
+
+ .set noreorder
+ ld $s5,0($sp) # epilogue
+ ld $s4,8($sp)
+___
+$code.=<<___ if ($flavour =~ /nubi/i); # optimize non-nubi epilogue
+ ld $s3,16($sp)
+ ld $s2,24($sp)
+ ld $s1,32($sp)
+ ld $s0,40($sp)
+___
+$code.=<<___;
+ dadd $sp,8*8
+
+.Lno_data:
+ jr $ra
+ nop
+.end poly1305_blocks
+___
+}
+{
+my ($ctx,$mac,$nonce) = ($a0,$a1,$a2);
+
+$code.=<<___;
+.align 5
+.globl poly1305_emit
+.ent poly1305_emit
+poly1305_emit:
+ .frame $sp,0,$ra
+ .set reorder
+
+ ld $tmp0,0($ctx)
+ ld $tmp1,8($ctx)
+ ld $tmp2,16($ctx)
+
+ daddiu $in0,$tmp0,5 # compare to modulus
+ sltiu $tmp3,$in0,5
+ daddu $in1,$tmp1,$tmp3
+ sltu $tmp3,$in1,$tmp3
+ daddu $tmp2,$tmp2,$tmp3
+
+ dsrl $tmp2,2 # see if it carried/borrowed
+ dsubu $tmp2,$zero,$tmp2
+ nor $tmp3,$zero,$tmp2
+
+ and $in0,$tmp2
+ and $tmp0,$tmp3
+ and $in1,$tmp2
+ and $tmp1,$tmp3
+ or $in0,$tmp0
+ or $in1,$tmp1
+
+ lwu $tmp0,0($nonce) # load nonce
+ lwu $tmp1,4($nonce)
+ lwu $tmp2,8($nonce)
+ lwu $tmp3,12($nonce)
+ dsll $tmp1,32
+ dsll $tmp3,32
+ or $tmp0,$tmp1
+ or $tmp2,$tmp3
+
+ daddu $in0,$tmp0 # accumulate nonce
+ daddu $in1,$tmp2
+ sltu $tmp0,$in0,$tmp0
+ daddu $in1,$tmp0
+
+ dsrl $tmp0,$in0,8 # write mac value
+ dsrl $tmp1,$in0,16
+ dsrl $tmp2,$in0,24
+ sb $in0,0($mac)
+ dsrl $tmp3,$in0,32
+ sb $tmp0,1($mac)
+ dsrl $tmp0,$in0,40
+ sb $tmp1,2($mac)
+ dsrl $tmp1,$in0,48
+ sb $tmp2,3($mac)
+ dsrl $tmp2,$in0,56
+ sb $tmp3,4($mac)
+ dsrl $tmp3,$in1,8
+ sb $tmp0,5($mac)
+ dsrl $tmp0,$in1,16
+ sb $tmp1,6($mac)
+ dsrl $tmp1,$in1,24
+ sb $tmp2,7($mac)
+
+ sb $in1,8($mac)
+ dsrl $tmp2,$in1,32
+ sb $tmp3,9($mac)
+ dsrl $tmp3,$in1,40
+ sb $tmp0,10($mac)
+ dsrl $tmp0,$in1,48
+ sb $tmp1,11($mac)
+ dsrl $tmp1,$in1,56
+ sb $tmp2,12($mac)
+ sb $tmp3,13($mac)
+ sb $tmp0,14($mac)
+ sb $tmp1,15($mac)
+
+ jr $ra
+.end poly1305_emit
+.rdata
+.asciiz "Poly1305 for MIPS64, CRYPTOGAMS by <appro\@openssl.org>"
+.align 2
+___
+}
+
+$output=pop and open STDOUT,">$output";
+print $code;
+close STDOUT;
+
projects / openssl.git / commitdiff