--- /dev/null
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by David S. Miller <davem@devemloft.net> and Andy Polyakov
+# <appro@openssl.org>. The module is licensed under 2-clause BSD
+# license. November 2012. All rights reserved.
+# ====================================================================
+
+######################################################################
+# Montgomery squaring-n-multiplication module for SPARC T4.
+#
+# The module consists of three parts:
+#
+# 1) collection of "single-op" subroutines that perform single
+# operation, Montgomery squaring or multiplication, on 512-,
+# 1024-, 1536- and 2048-bit operands;
+# 2) collection of "multi-op" subroutines that perform 5 squaring and
+# 1 multiplication operations on operands of above lengths;
+# 3) fall-back and helper VIS3 subroutines.
+#
+# RSA sign is dominated by multi-op subroutine, while RSA verify and
+# DSA - by single-op. Special note about 4096-bit RSA verify result.
+# Operands are too long for dedicated hardware and it's handled by
+# VIS3 code, which is why you don't see any improvement. It's surely
+# possible to improve it [by deploying 'mpmul' instruction], maybe in
+# the future...
+#
+# Performance improvement.
+#
+# 64-bit process, VIS3:
+# sign verify sign/s verify/s
+# rsa 1024 bits 0.000633s 0.000033s 1578.9 30513.3
+# rsa 2048 bits 0.003297s 0.000116s 303.3 8585.8
+# rsa 4096 bits 0.026000s 0.000387s 38.5 2587.0
+# dsa 1024 bits 0.000301s 0.000332s 3323.7 3013.9
+# dsa 2048 bits 0.001056s 0.001233s 946.9 810.8
+#
+# 64-bit process, this module:
+# sign verify sign/s verify/s
+# rsa 1024 bits 0.000341s 0.000021s 2931.5 46873.8
+# rsa 2048 bits 0.001244s 0.000044s 803.9 22569.1
+# rsa 4096 bits 0.006203s 0.000387s 161.2 2586.3
+# dsa 1024 bits 0.000179s 0.000195s 5573.9 5115.6
+# dsa 2048 bits 0.000311s 0.000350s 3212.3 2856.6
+#
+######################################################################
+# 32-bit process, VIS3:
+# sign verify sign/s verify/s
+# rsa 1024 bits 0.000675s 0.000033s 1480.9 30159.0
+# rsa 2048 bits 0.003383s 0.000118s 295.6 8499.9
+# rsa 4096 bits 0.026178s 0.000394s 38.2 2541.3
+# dsa 1024 bits 0.000326s 0.000343s 3070.0 2918.8
+# dsa 2048 bits 0.001121s 0.001291s 891.9 774.4
+#
+# 32-bit process, this module:
+# sign verify sign/s verify/s
+# rsa 1024 bits 0.000386s 0.000022s 2589.6 45704.9
+# rsa 2048 bits 0.001335s 0.000046s 749.3 21766.8
+# rsa 4096 bits 0.006390s 0.000393s 156.5 2544.8
+# dsa 1024 bits 0.000208s 0.000204s 4817.6 4896.6
+# dsa 2048 bits 0.000345s 0.000364s 2898.8 2747.3
+#
+# 32-bit code is prone to performance degradation as interrupt rate
+# dispatched to CPU executing the code grows. This is because in
+# standard process of handling interrupt in 32-bit process context
+# upper halves of most integer registers used as input or output are
+# zeroed. This renders result invalid, and operation has to be re-run.
+# If CPU is "bothered" with timer interrupts only, the penalty is
+# hardly measurable. But in order to mitigate this problem for higher
+# interrupt rates contemporary Linux kernel recognizes biased stack
+# even in 32-bit process context and preserves full register contents.
+# See http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;h=517ffce4e1a03aea979fe3a18a3dd1761a24fafb
+# for details.
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+push(@INC,"${dir}","${dir}../../perlasm");
+require "sparcv9_modes.pl";
+
+$code.=<<___;
+#include "sparc_arch.h"
+
+#ifdef __arch64__
+.register %g2,#scratch
+.register %g3,#scratch
+#endif
+
+.section ".text",#alloc,#execinstr
+
+#ifdef __PIC__
+SPARC_PIC_THUNK(%g1)
+#endif
+___
+
+########################################################################
+# Register layout for mont[mul|sqr] instructions.
+# For details see "Oracle SPARC Architecture 2011" manual at
+# http://www.oracle.com/technetwork/server-storage/sun-sparc-enterprise/documentation/.
+#
+my @R=map("%f".2*$_,(0..11,30,31,12..29));
+my @N=(map("%l$_",(0..7)),map("%o$_",(0..5))); @N=(@N,@N,@N[0..3]);
+my @B=(map("%o$_",(0..5)),@N[0..13],@N[0..11]);
+my @A=(@N[0..13],@R[14..31]);
+\f
+########################################################################
+# int bn_mul_mont_t4_$NUM(u64 *rp,const u64 *ap,const u64 *bp,
+# const u64 *np,const BN_ULONG *n0);
+#
+sub generate_bn_mul_mont_t4() {
+my $NUM=shift;
+my ($rp,$ap,$bp,$np,$sentinel)=map("%g$_",(1..5));
+
+$code.=<<___;
+.globl bn_mul_mont_t4_$NUM
+.align 32
+bn_mul_mont_t4_$NUM:
+#ifdef __arch64__
+ mov 0,$sentinel
+ mov -128,%g4
+#elif defined(SPARCV9_64BIT_STACK)
+ SPARC_LOAD_ADDRESS_LEAF(OPENSSL_sparcv9cap_P,%g1,%g5)
+ ld [%g1+0],%g1 ! OPENSSL_sparcv9_P[0]
+ mov -2047,%g4
+ and %g1,SPARCV9_64BIT_STACK,%g1
+ movrz %g1,0,%g4
+ mov -1,$sentinel
+ add %g4,-128,%g4
+#else
+ mov -1,$sentinel
+ mov -128,%g4
+#endif
+ sllx $sentinel,32,$sentinel
+ save %sp,%g4,%sp
+#ifndef __arch64__
+ save %sp,-128,%sp ! warm it up
+ save %sp,-128,%sp
+ save %sp,-128,%sp
+ save %sp,-128,%sp
+ save %sp,-128,%sp
+ save %sp,-128,%sp
+ restore
+ restore
+ restore
+ restore
+ restore
+ restore
+#endif
+ and %sp,1,%g4
+ or $sentinel,%fp,%fp
+ or %g4,$sentinel,$sentinel
+
+ ! copy arguments to global registers
+ mov %i0,$rp
+ mov %i1,$ap
+ mov %i2,$bp
+ mov %i3,$np
+ ld [%i4+0],%f1 ! load *n0
+ ld [%i4+4],%f0
+ fsrc2 %f0,%f60
+___
+\f
+# load ap[$NUM] ########################################################
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for($i=0; $i<14 && $i<$NUM; $i++) {
+my $lo=$i<13?@A[$i+1]:"%o7";
+$code.=<<___;
+ ld [$ap+$i*8+0],$lo
+ ld [$ap+$i*8+4],@A[$i]
+ sllx @A[$i],32,@A[$i]
+ or $lo,@A[$i],@A[$i]
+___
+}
+for(; $i<$NUM; $i++) {
+my ($hi,$lo)=("%f".2*($i%4),"%f".(2*($i%4)+1));
+$code.=<<___;
+ ld [$ap+$i*8+0],$lo
+ ld [$ap+$i*8+4],$hi
+ fsrc2 $hi,@A[$i]
+___
+}
+# load np[$NUM] ########################################################
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for($i=0; $i<14 && $i<$NUM; $i++) {
+my $lo=$i<13?@N[$i+1]:"%o7";
+$code.=<<___;
+ ld [$np+$i*8+0],$lo
+ ld [$np+$i*8+4],@N[$i]
+ sllx @N[$i],32,@N[$i]
+ or $lo,@N[$i],@N[$i]
+___
+}
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for(; $i<28 && $i<$NUM; $i++) {
+my $lo=$i<27?@N[$i+1]:"%o7";
+$code.=<<___;
+ ld [$np+$i*8+0],$lo
+ ld [$np+$i*8+4],@N[$i]
+ sllx @N[$i],32,@N[$i]
+ or $lo,@N[$i],@N[$i]
+___
+}
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for(; $i<$NUM; $i++) {
+my $lo=($i<$NUM-1)?@N[$i+1]:"%o7";
+$code.=<<___;
+ ld [$np+$i*8+0],$lo
+ ld [$np+$i*8+4],@N[$i]
+ sllx @N[$i],32,@N[$i]
+ or $lo,@N[$i],@N[$i]
+___
+}
+$code.=<<___;
+ cmp $ap,$bp
+ be SIZE_T_CC,.Lmsquare_$NUM
+ nop
+___
+\f
+# load bp[$NUM] ########################################################
+for($i=0; $i<6 && $i<$NUM; $i++) {
+my $lo=$i<5?@B[$i+1]:"%o7";
+$code.=<<___;
+ ld [$bp+$i*8+0],$lo
+ ld [$bp+$i*8+4],@B[$i]
+ sllx @B[$i],32,@B[$i]
+ or $lo,@B[$i],@B[$i]
+___
+}
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for(; $i<20 && $i<$NUM; $i++) {
+my $lo=$i<19?@B[$i+1]:"%o7";
+$code.=<<___;
+ ld [$bp+$i*8+0],$lo
+ ld [$bp+$i*8+4],@B[$i]
+ sllx @B[$i],32,@B[$i]
+ or $lo,@B[$i],@B[$i]
+___
+}
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for(; $i<$NUM; $i++) {
+my $lo=($i<$NUM-1)?@B[$i+1]:"%o7";
+$code.=<<___;
+ ld [$bp+$i*8+0],$lo
+ ld [$bp+$i*8+4],@B[$i]
+ sllx @B[$i],32,@B[$i]
+ or $lo,@B[$i],@B[$i]
+___
+}
+# magic ################################################################
+$code.=<<___;
+ .word 0x81b02920+$NUM-1 ! montmul $NUM-1
+.Lmresume_$NUM:
+ fbu,pn %fcc3,.Lmabort_$NUM
+#ifndef __arch64__
+ and %fp,$sentinel,$sentinel
+ brz,pn $sentinel,.Lmabort_$NUM
+#endif
+ nop
+#ifdef __arch64__
+ restore
+ restore
+ restore
+ restore
+ restore
+#else
+ restore; and %fp,$sentinel,$sentinel
+ restore; and %fp,$sentinel,$sentinel
+ restore; and %fp,$sentinel,$sentinel
+ restore; and %fp,$sentinel,$sentinel
+ brz,pn $sentinel,.Lmabort1_$NUM
+ restore
+#endif
+___
+\f
+# save tp[$NUM] ########################################################
+for($i=0; $i<14 && $i<$NUM; $i++) {
+$code.=<<___;
+ movxtod @A[$i],@R[$i]
+___
+}
+$code.=<<___;
+#ifdef __arch64__
+ restore
+#else
+ and %fp,$sentinel,$sentinel
+ restore
+ and $sentinel,1,%o7
+ and %fp,$sentinel,$sentinel
+ srl %fp,0,%fp ! just in case?
+ or %o7,$sentinel,$sentinel
+ brz,a,pn $sentinel,.Lmdone_$NUM
+ mov 0,%i0 ! return failure
+#endif
+___
+for($i=0; $i<12 && $i<$NUM; $i++) {
+@R[$i] =~ /%f([0-9]+)/;
+my $lo = "%f".($1+1);
+$code.=<<___;
+ st $lo,[$rp+$i*8+0]
+ st @R[$i],[$rp+$i*8+4]
+___
+}
+for(; $i<$NUM; $i++) {
+my ($hi,$lo)=("%f".2*($i%4),"%f".(2*($i%4)+1));
+$code.=<<___;
+ fsrc2 @R[$i],$hi
+ st $lo,[$rp+$i*8+0]
+ st $hi,[$rp+$i*8+4]
+___
+}
+$code.=<<___;
+ mov 1,%i0 ! return success
+.Lmdone_$NUM:
+ ret
+ restore
+
+.Lmabort_$NUM:
+ restore
+ restore
+ restore
+ restore
+ restore
+.Lmabort1_$NUM:
+ restore
+
+ mov 0,%i0 ! return failure
+ ret
+ restore
+
+.align 32
+.Lmsquare_$NUM:
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+ .word 0x81b02940+$NUM-1 ! montsqr $NUM-1
+ ba .Lmresume_$NUM
+ nop
+.type bn_mul_mont_t4_$NUM, #function
+.size bn_mul_mont_t4_$NUM, .-bn_mul_mont_t4_$NUM
+___
+}
+
+for ($i=8;$i<=32;$i+=8) {
+ &generate_bn_mul_mont_t4($i);
+}
+\f
+########################################################################
+#
+sub load_fcc() {
+my ($ptbl,$pwr,$tmp)=@_;
+$code.=<<___;
+ sethi %hi(.Lmagic-1f),$tmp
+1: call .+8
+ add %o7, $tmp, %o7
+ inc %lo(.Lmagic-1b),%o7
+ and $pwr, 7<<2, $tmp ! offset within "magic table"
+ add $tmp, %o7, %o7
+ and $pwr, 3, $tmp
+ sll $tmp, 3, $tmp ! offset within first cache line
+ add $tmp, $ptbl, $ptbl ! of the pwrtbl
+
+ ! "magic table" is organized in such way that below comparisons
+ ! make %fcc3:%fcc2:%fcc1:%fcc0 form a byte of 1s with one 0,
+ ! e.g. 0b11011111, with 0 denoting relevant cache line.
+ ld [%o7+0], %f0 ! load column
+ ld [%o7+32], %f1
+ ld [%o7+64], %f2
+ fcmps %fcc0, %f0, %f1
+ ld [%o7+96], %f3
+ fcmps %fcc1, %f1, %f2
+ fcmps %fcc2, %f2, %f3
+ fcmps %fcc3, %f3, %f0
+___
+}
+sub load_f16() {
+my $ptbl=shift;
+$code.=<<___;
+ ldd [$ptbl+0*32],%f0 ! load all cache lines
+ ldd [$ptbl+1*32],%f2
+ ldd [$ptbl+2*32],%f4
+ fmovdg %fcc0,%f0,%f16 ! pick one value
+ ldd [$ptbl+3*32],%f6
+ fmovdl %fcc0,%f2,%f16
+ ldd [$ptbl+4*32],%f8
+ fmovdg %fcc1,%f4,%f16
+ ldd [$ptbl+5*32],%f10
+ fmovdl %fcc1,%f6,%f16
+ ldd [$ptbl+6*32],%f12
+ fmovdg %fcc2,%f8,%f16
+ ldd [$ptbl+7*32],%f14
+ fmovdl %fcc2,%f10,%f16
+ fmovdg %fcc3,%f12,%f16
+ fmovdl %fcc3,%f14,%f16
+ add $ptbl,8*32,$ptbl
+___
+}
+\f
+########################################################################
+# int bn_pwr5_mont_t4_$NUM(u64 *tp,const u64 *np,const BN_ULONG *n0,
+# const u64 *pwrtbl,int pwr);
+#
+sub generate_bn_pwr5_mont_t4() {
+my $NUM=shift;
+my ($tp,$np,$pwrtbl,$pwr,$sentinel)=map("%g$_",(1..5));
+
+$code.=<<___;
+.globl bn_pwr5_mont_t4_$NUM
+.align 32
+bn_pwr5_mont_t4_$NUM:
+#ifdef __arch64__
+ mov 0,$sentinel
+ mov -128,%g4
+#elif defined(SPARCV9_64BIT_STACK)
+ SPARC_LOAD_ADDRESS_LEAF(OPENSSL_sparcv9cap_P,%g1,%g5)
+ ld [%g1+0],%g1 ! OPENSSL_sparcv9_P[0]
+ mov -2047,%g4
+ and %g1,SPARCV9_64BIT_STACK,%g1
+ movrz %g1,0,%g4
+ mov -1,$sentinel
+ add %g4,-128,%g4
+#else
+ mov -1,$sentinel
+ mov -128,%g4
+#endif
+ sllx $sentinel,32,$sentinel
+ save %sp,%g4,%sp
+#ifndef __arch64__
+ save %sp,-128,%sp ! warm it up
+ save %sp,-128,%sp
+ save %sp,-128,%sp
+ save %sp,-128,%sp
+ save %sp,-128,%sp
+ save %sp,-128,%sp
+ restore
+ restore
+ restore
+ restore
+ restore
+ restore
+#endif
+ and %sp,1,%g4
+ or $sentinel,%fp,%fp
+ or %g4,$sentinel,$sentinel
+
+ ! copy arguments to global registers
+ mov %i0,$tp
+ mov %i1,$np
+ ld [%i2+0],%f1 ! load *n0
+ ld [%i2+4],%f0
+ mov %i3,$pwrtbl
+ mov %i4,$pwr
+ fsrc2 %f0,%f60
+___
+\f
+# load tp[$NUM] ########################################################
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for($i=0; $i<14 && $i<$NUM; $i++) {
+$code.=<<___;
+ ldx [$tp+$i*8],@A[$i]
+___
+}
+for(; $i<$NUM; $i++) {
+$code.=<<___;
+ ldd [$tp+$i*8],@A[$i]
+___
+}
+# load np[$NUM] ########################################################
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for($i=0; $i<14 && $i<$NUM; $i++) {
+$code.=<<___;
+ ldx [$np+$i*8],@N[$i]
+___
+}
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for(; $i<28 && $i<$NUM; $i++) {
+$code.=<<___;
+ ldx [$np+$i*8],@N[$i]
+___
+}
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for(; $i<$NUM; $i++) {
+$code.=<<___;
+ ldx [$np+$i*8],@N[$i]
+___
+}
+# load pwrtbl[pwr] ########################################################
+ &load_fcc($pwrtbl,$pwr,@B[0]);
+for($i=0; $i<6 && $i<$NUM; $i++) {
+ &load_f16($pwrtbl);
+$code.=<<___;
+ movdtox %f16,@B[$i]
+___
+}
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for(; $i<20 && $i<$NUM; $i++) {
+ &load_f16($pwrtbl);
+$code.=<<___;
+ movdtox %f16,@B[$i]
+___
+}
+$code.=<<___;
+ save %sp,-128,%sp; or $sentinel,%fp,%fp
+___
+for(; $i<$NUM; $i++) {
+ &load_f16($pwrtbl);
+$code.=<<___;
+ movdtox %f16,@B[$i]
+___
+}
+\f
+# magic ################################################################
+for($i=0; $i<5; $i++) {
+$code.=<<___;
+ .word 0x81b02940+$NUM-1 ! montsqr $NUM-1
+ fbu,pn %fcc3,.Labort_$NUM
+#ifndef __arch64__
+ and %fp,$sentinel,$sentinel
+ brz,pn $sentinel,.Labort_$NUM
+#endif
+ nop
+___
+}
+$code.=<<___;
+ .word 0x81b02920+$NUM-1 ! montmul $NUM-1
+ fbu,pn %fcc3,.Labort_$NUM
+#ifndef __arch64__
+ and %fp,$sentinel,$sentinel
+ brz,pn $sentinel,.Labort_$NUM
+#endif
+ nop
+
+#ifdef __arch64__
+ restore
+ restore
+ restore
+ restore
+ restore
+#else
+ restore; and %fp,$sentinel,$sentinel
+ restore; and %fp,$sentinel,$sentinel
+ restore; and %fp,$sentinel,$sentinel
+ restore; and %fp,$sentinel,$sentinel
+ brz,pn $sentinel,.Labort1_$NUM
+ restore
+#endif
+___
+\f
+# save tp[$NUM] ########################################################
+for($i=0; $i<14 && $i<$NUM; $i++) {
+$code.=<<___;
+ movxtod @A[$i],@R[$i]
+___
+}
+$code.=<<___;
+#ifdef __arch64__
+ restore
+#else
+ and %fp,$sentinel,$sentinel
+ restore
+ and $sentinel,1,%o7
+ and %fp,$sentinel,$sentinel
+ srl %fp,0,%fp ! just in case?
+ or %o7,$sentinel,$sentinel
+ brz,a,pn $sentinel,.Ldone_$NUM
+ mov 0,%i0 ! return failure
+#endif
+___
+for($i=0; $i<$NUM; $i++) {
+$code.=<<___;
+ std @R[$i],[$tp+$i*8]
+___
+}
+$code.=<<___;
+ mov 1,%i0 ! return success
+.Ldone_$NUM:
+ ret
+ restore
+
+.Labort_$NUM:
+ restore
+ restore
+ restore
+ restore
+ restore
+.Labort1_$NUM:
+ restore
+
+ mov 0,%i0 ! return failure
+ ret
+ restore
+.type bn_pwr5_mont_t4_$NUM, #function
+.size bn_pwr5_mont_t4_$NUM, .-bn_pwr5_mont_t4_$NUM
+___
+}
+
+for ($i=8;$i<=32;$i+=8) {
+ &generate_bn_pwr5_mont_t4($i);
+}
+\f
+{
+########################################################################
+# Fall-back subroutines
+#
+# copy of bn_mul_mont_vis3 adjusted for vectors of 64-bit values
+#
+($n0,$m0,$m1,$lo0,$hi0, $lo1,$hi1,$aj,$alo,$nj,$nlo,$tj)=
+ (map("%g$_",(1..5)),map("%o$_",(0..5,7)));
+
+# int bn_mul_mont(
+$rp="%o0"; # u64 *rp,
+$ap="%o1"; # const u64 *ap,
+$bp="%o2"; # const u64 *bp,
+$np="%o3"; # const u64 *np,
+$n0p="%o4"; # const BN_ULONG *n0,
+$num="%o5"; # int num); # caller ensures that num is >=3
+$code.=<<___;
+.globl bn_mul_mont_t4
+.align 32
+bn_mul_mont_t4:
+ add %sp, STACK_BIAS, %g4 ! real top of stack
+ sll $num, 3, $num ! size in bytes
+ add $num, 63, %g1
+ andn %g1, 63, %g1 ! buffer size rounded up to 64 bytes
+ sub %g4, %g1, %g1
+ andn %g1, 63, %g1 ! align at 64 byte
+ sub %g1, STACK_FRAME, %g1 ! new top of stack
+ sub %g1, %g4, %g1
+
+ save %sp, %g1, %sp
+___
+# +-------------------------------+<----- %sp
+# . .
+# +-------------------------------+<----- aligned at 64 bytes
+# | __int64 tmp[0] |
+# +-------------------------------+
+# . .
+# . .
+# +-------------------------------+<----- aligned at 64 bytes
+# . .
+($rp,$ap,$bp,$np,$n0p,$num)=map("%i$_",(0..5));
+($t0,$t1,$t2,$t3,$cnt,$tp,$bufsz)=map("%l$_",(0..7));
+($ovf,$i)=($t0,$t1);
+$code.=<<___;
+ ld [$n0p+0], $t0 ! pull n0[0..1] value
+ ld [$n0p+4], $t1
+ add %sp, STACK_BIAS+STACK_FRAME, $tp
+ ldx [$bp+0], $m0 ! m0=bp[0]
+ sllx $t1, 32, $n0
+ add $bp, 8, $bp
+ or $t0, $n0, $n0
+\f
+ ldx [$ap+0], $aj ! ap[0]
+
+ mulx $aj, $m0, $lo0 ! ap[0]*bp[0]
+ umulxhi $aj, $m0, $hi0
+
+ ldx [$ap+8], $aj ! ap[1]
+ add $ap, 16, $ap
+ ldx [$np+0], $nj ! np[0]
+
+ mulx $lo0, $n0, $m1 ! "tp[0]"*n0
+
+ mulx $aj, $m0, $alo ! ap[1]*bp[0]
+ umulxhi $aj, $m0, $aj ! ahi=aj
+
+ mulx $nj, $m1, $lo1 ! np[0]*m1
+ umulxhi $nj, $m1, $hi1
+
+ ldx [$np+8], $nj ! np[1]
+
+ addcc $lo0, $lo1, $lo1
+ add $np, 16, $np
+ addxc %g0, $hi1, $hi1
+
+ mulx $nj, $m1, $nlo ! np[1]*m1
+ umulxhi $nj, $m1, $nj ! nhi=nj
+\f
+ ba .L1st
+ sub $num, 24, $cnt ! cnt=num-3
+
+.align 16
+.L1st:
+ addcc $alo, $hi0, $lo0
+ addxc $aj, %g0, $hi0
+
+ ldx [$ap+0], $aj ! ap[j]
+ addcc $nlo, $hi1, $lo1
+ add $ap, 8, $ap
+ addxc $nj, %g0, $hi1 ! nhi=nj
+
+ ldx [$np+0], $nj ! np[j]
+ mulx $aj, $m0, $alo ! ap[j]*bp[0]
+ add $np, 8, $np
+ umulxhi $aj, $m0, $aj ! ahi=aj
+
+ mulx $nj, $m1, $nlo ! np[j]*m1
+ addcc $lo0, $lo1, $lo1 ! np[j]*m1+ap[j]*bp[0]
+ umulxhi $nj, $m1, $nj ! nhi=nj
+ addxc %g0, $hi1, $hi1
+ stxa $lo1, [$tp]0xe2 ! tp[j-1]
+ add $tp, 8, $tp ! tp++
+
+ brnz,pt $cnt, .L1st
+ sub $cnt, 8, $cnt ! j--
+!.L1st
+ addcc $alo, $hi0, $lo0
+ addxc $aj, %g0, $hi0 ! ahi=aj
+
+ addcc $nlo, $hi1, $lo1
+ addxc $nj, %g0, $hi1
+ addcc $lo0, $lo1, $lo1 ! np[j]*m1+ap[j]*bp[0]
+ addxc %g0, $hi1, $hi1
+ stxa $lo1, [$tp]0xe2 ! tp[j-1]
+ add $tp, 8, $tp
+
+ addcc $hi0, $hi1, $hi1
+ addxc %g0, %g0, $ovf ! upmost overflow bit
+ stxa $hi1, [$tp]0xe2
+ add $tp, 8, $tp
+\f
+ ba .Louter
+ sub $num, 16, $i ! i=num-2
+
+.align 16
+.Louter:
+ ldx [$bp+0], $m0 ! m0=bp[i]
+ add $bp, 8, $bp
+
+ sub $ap, $num, $ap ! rewind
+ sub $np, $num, $np
+ sub $tp, $num, $tp
+
+ ldx [$ap+0], $aj ! ap[0]
+ ldx [$np+0], $nj ! np[0]
+
+ mulx $aj, $m0, $lo0 ! ap[0]*bp[i]
+ ldx [$tp], $tj ! tp[0]
+ umulxhi $aj, $m0, $hi0
+ ldx [$ap+8], $aj ! ap[1]
+ addcc $lo0, $tj, $lo0 ! ap[0]*bp[i]+tp[0]
+ mulx $aj, $m0, $alo ! ap[1]*bp[i]
+ addxc %g0, $hi0, $hi0
+ mulx $lo0, $n0, $m1 ! tp[0]*n0
+ umulxhi $aj, $m0, $aj ! ahi=aj
+ mulx $nj, $m1, $lo1 ! np[0]*m1
+ add $ap, 16, $ap
+ umulxhi $nj, $m1, $hi1
+ ldx [$np+8], $nj ! np[1]
+ add $np, 16, $np
+ addcc $lo1, $lo0, $lo1
+ mulx $nj, $m1, $nlo ! np[1]*m1
+ addxc %g0, $hi1, $hi1
+ umulxhi $nj, $m1, $nj ! nhi=nj
+\f
+ ba .Linner
+ sub $num, 24, $cnt ! cnt=num-3
+.align 16
+.Linner:
+ addcc $alo, $hi0, $lo0
+ ldx [$tp+8], $tj ! tp[j]
+ addxc $aj, %g0, $hi0 ! ahi=aj
+ ldx [$ap+0], $aj ! ap[j]
+ add $ap, 8, $ap
+ addcc $nlo, $hi1, $lo1
+ mulx $aj, $m0, $alo ! ap[j]*bp[i]
+ addxc $nj, %g0, $hi1 ! nhi=nj
+ ldx [$np+0], $nj ! np[j]
+ add $np, 8, $np
+ umulxhi $aj, $m0, $aj ! ahi=aj
+ addcc $lo0, $tj, $lo0 ! ap[j]*bp[i]+tp[j]
+ mulx $nj, $m1, $nlo ! np[j]*m1
+ addxc %g0, $hi0, $hi0
+ umulxhi $nj, $m1, $nj ! nhi=nj
+ addcc $lo1, $lo0, $lo1 ! np[j]*m1+ap[j]*bp[i]+tp[j]
+ addxc %g0, $hi1, $hi1
+ stx $lo1, [$tp] ! tp[j-1]
+ add $tp, 8, $tp
+ brnz,pt $cnt, .Linner
+ sub $cnt, 8, $cnt
+!.Linner
+ ldx [$tp+8], $tj ! tp[j]
+ addcc $alo, $hi0, $lo0
+ addxc $aj, %g0, $hi0 ! ahi=aj
+ addcc $lo0, $tj, $lo0 ! ap[j]*bp[i]+tp[j]
+ addxc %g0, $hi0, $hi0
+
+ addcc $nlo, $hi1, $lo1
+ addxc $nj, %g0, $hi1 ! nhi=nj
+ addcc $lo1, $lo0, $lo1 ! np[j]*m1+ap[j]*bp[i]+tp[j]
+ addxc %g0, $hi1, $hi1
+ stx $lo1, [$tp] ! tp[j-1]
+
+ subcc %g0, $ovf, %g0 ! move upmost overflow to CCR.xcc
+ addxccc $hi1, $hi0, $hi1
+ addxc %g0, %g0, $ovf
+ stx $hi1, [$tp+8]
+ add $tp, 16, $tp
+
+ brnz,pt $i, .Louter
+ sub $i, 8, $i
+\f
+ sub $ap, $num, $ap ! rewind
+ sub $np, $num, $np
+ sub $tp, $num, $tp
+ ba .Lsub
+ subcc $num, 8, $cnt ! cnt=num-1 and clear CCR.xcc
+
+.align 16
+.Lsub:
+ ldx [$tp], $tj
+ add $tp, 8, $tp
+ ldx [$np+0], $nj
+ add $np, 8, $np
+ subccc $tj, $nj, $t2 ! tp[j]-np[j]
+ srlx $tj, 32, $tj
+ srlx $nj, 32, $nj
+ subccc $tj, $nj, $t3
+ add $rp, 8, $rp
+ st $t2, [$rp-4] ! reverse order
+ st $t3, [$rp-8]
+ brnz,pt $cnt, .Lsub
+ sub $cnt, 8, $cnt
+
+ sub $np, $num, $np ! rewind
+ sub $tp, $num, $tp
+ sub $rp, $num, $rp
+
+ subc $ovf, %g0, $ovf ! handle upmost overflow bit
+ and $tp, $ovf, $ap
+ andn $rp, $ovf, $np
+ or $np, $ap, $ap ! ap=borrow?tp:rp
+ ba .Lcopy
+ sub $num, 8, $cnt
+
+.align 16
+.Lcopy: ! copy or in-place refresh
+ ldx [$ap+0], $t2
+ add $ap, 8, $ap
+ stx %g0, [$tp] ! zap
+ add $tp, 8, $tp
+ stx $t2, [$rp+0]
+ add $rp, 8, $rp
+ brnz $cnt, .Lcopy
+ sub $cnt, 8, $cnt
+
+ mov 1, %o0
+ ret
+ restore
+.type bn_mul_mont_t4, #function
+.size bn_mul_mont_t4, .-bn_mul_mont_t4
+___
+\f
+# int bn_mul_mont_gather5(
+$rp="%o0"; # u64 *rp,
+$ap="%o1"; # const u64 *ap,
+$bp="%o2"; # const u64 *pwrtbl,
+$np="%o3"; # const u64 *np,
+$n0p="%o4"; # const BN_ULONG *n0,
+$num="%o5"; # int num, # caller ensures that num is >=3
+ # int power);
+$code.=<<___;
+.globl bn_mul_mont_gather5_t4
+.align 32
+bn_mul_mont_gather5_t4:
+ add %sp, STACK_BIAS, %g4 ! real top of stack
+ sll $num, 3, $num ! size in bytes
+ add $num, 63, %g1
+ andn %g1, 63, %g1 ! buffer size rounded up to 64 bytes
+ sub %g4, %g1, %g1
+ andn %g1, 63, %g1 ! align at 64 byte
+ sub %g1, STACK_FRAME, %g1 ! new top of stack
+ sub %g1, %g4, %g1
+ LDPTR [%sp+STACK_7thARG], %g4 ! load power, 7th argument
+
+ save %sp, %g1, %sp
+___
+# +-------------------------------+<----- %sp
+# . .
+# +-------------------------------+<----- aligned at 64 bytes
+# | __int64 tmp[0] |
+# +-------------------------------+
+# . .
+# . .
+# +-------------------------------+<----- aligned at 64 bytes
+# . .
+($rp,$ap,$bp,$np,$n0p,$num)=map("%i$_",(0..5));
+($t0,$t1,$t2,$t3,$cnt,$tp,$bufsz)=map("%l$_",(0..7));
+($ovf,$i)=($t0,$t1);
+ &load_fcc($bp,"%g4","%g1");
+ &load_f16($bp);
+$code.=<<___;
+ movdtox %f16, $m0 ! m0=bp[0]
+
+ ld [$n0p+0], $t0 ! pull n0[0..1] value
+ ld [$n0p+4], $t1
+ add %sp, STACK_BIAS+STACK_FRAME, $tp
+ sllx $t1, 32, $n0
+ or $t0, $n0, $n0
+\f
+ ldx [$ap+0], $aj ! ap[0]
+
+ mulx $aj, $m0, $lo0 ! ap[0]*bp[0]
+ umulxhi $aj, $m0, $hi0
+
+ ldx [$ap+8], $aj ! ap[1]
+ add $ap, 16, $ap
+ ldx [$np+0], $nj ! np[0]
+
+ mulx $lo0, $n0, $m1 ! "tp[0]"*n0
+
+ mulx $aj, $m0, $alo ! ap[1]*bp[0]
+ umulxhi $aj, $m0, $aj ! ahi=aj
+
+ mulx $nj, $m1, $lo1 ! np[0]*m1
+ umulxhi $nj, $m1, $hi1
+
+ ldx [$np+8], $nj ! np[1]
+
+ addcc $lo0, $lo1, $lo1
+ add $np, 16, $np
+ addxc %g0, $hi1, $hi1
+
+ mulx $nj, $m1, $nlo ! np[1]*m1
+ umulxhi $nj, $m1, $nj ! nhi=nj
+\f
+ ba .L1st_g5
+ sub $num, 24, $cnt ! cnt=num-3
+
+.align 16
+.L1st_g5:
+ addcc $alo, $hi0, $lo0
+ addxc $aj, %g0, $hi0
+
+ ldx [$ap+0], $aj ! ap[j]
+ addcc $nlo, $hi1, $lo1
+ add $ap, 8, $ap
+ addxc $nj, %g0, $hi1 ! nhi=nj
+
+ ldx [$np+0], $nj ! np[j]
+ mulx $aj, $m0, $alo ! ap[j]*bp[0]
+ add $np, 8, $np
+ umulxhi $aj, $m0, $aj ! ahi=aj
+
+ mulx $nj, $m1, $nlo ! np[j]*m1
+ addcc $lo0, $lo1, $lo1 ! np[j]*m1+ap[j]*bp[0]
+ umulxhi $nj, $m1, $nj ! nhi=nj
+ addxc %g0, $hi1, $hi1
+ stxa $lo1, [$tp]0xe2 ! tp[j-1]
+ add $tp, 8, $tp ! tp++
+
+ brnz,pt $cnt, .L1st_g5
+ sub $cnt, 8, $cnt ! j--
+!.L1st_g5
+ addcc $alo, $hi0, $lo0
+ addxc $aj, %g0, $hi0 ! ahi=aj
+
+ addcc $nlo, $hi1, $lo1
+ addxc $nj, %g0, $hi1
+ addcc $lo0, $lo1, $lo1 ! np[j]*m1+ap[j]*bp[0]
+ addxc %g0, $hi1, $hi1
+ stxa $lo1, [$tp]0xe2 ! tp[j-1]
+ add $tp, 8, $tp
+
+ addcc $hi0, $hi1, $hi1
+ addxc %g0, %g0, $ovf ! upmost overflow bit
+ stxa $hi1, [$tp]0xe2
+ add $tp, 8, $tp
+\f
+ ba .Louter_g5
+ sub $num, 16, $i ! i=num-2
+
+.align 16
+.Louter_g5:
+___
+ &load_f16($bp);
+$code.=<<___;
+ movdtox %f16, $m0 ! m0=bp[i]
+
+ sub $ap, $num, $ap ! rewind
+ sub $np, $num, $np
+ sub $tp, $num, $tp
+
+ ldx [$ap+0], $aj ! ap[0]
+ ldx [$np+0], $nj ! np[0]
+
+ mulx $aj, $m0, $lo0 ! ap[0]*bp[i]
+ ldx [$tp], $tj ! tp[0]
+ umulxhi $aj, $m0, $hi0
+ ldx [$ap+8], $aj ! ap[1]
+ addcc $lo0, $tj, $lo0 ! ap[0]*bp[i]+tp[0]
+ mulx $aj, $m0, $alo ! ap[1]*bp[i]
+ addxc %g0, $hi0, $hi0
+ mulx $lo0, $n0, $m1 ! tp[0]*n0
+ umulxhi $aj, $m0, $aj ! ahi=aj
+ mulx $nj, $m1, $lo1 ! np[0]*m1
+ add $ap, 16, $ap
+ umulxhi $nj, $m1, $hi1
+ ldx [$np+8], $nj ! np[1]
+ add $np, 16, $np
+ addcc $lo1, $lo0, $lo1
+ mulx $nj, $m1, $nlo ! np[1]*m1
+ addxc %g0, $hi1, $hi1
+ umulxhi $nj, $m1, $nj ! nhi=nj
+\f
+ ba .Linner_g5
+ sub $num, 24, $cnt ! cnt=num-3
+.align 16
+.Linner_g5:
+ addcc $alo, $hi0, $lo0
+ ldx [$tp+8], $tj ! tp[j]
+ addxc $aj, %g0, $hi0 ! ahi=aj
+ ldx [$ap+0], $aj ! ap[j]
+ add $ap, 8, $ap
+ addcc $nlo, $hi1, $lo1
+ mulx $aj, $m0, $alo ! ap[j]*bp[i]
+ addxc $nj, %g0, $hi1 ! nhi=nj
+ ldx [$np+0], $nj ! np[j]
+ add $np, 8, $np
+ umulxhi $aj, $m0, $aj ! ahi=aj
+ addcc $lo0, $tj, $lo0 ! ap[j]*bp[i]+tp[j]
+ mulx $nj, $m1, $nlo ! np[j]*m1
+ addxc %g0, $hi0, $hi0
+ umulxhi $nj, $m1, $nj ! nhi=nj
+ addcc $lo1, $lo0, $lo1 ! np[j]*m1+ap[j]*bp[i]+tp[j]
+ addxc %g0, $hi1, $hi1
+ stx $lo1, [$tp] ! tp[j-1]
+ add $tp, 8, $tp
+ brnz,pt $cnt, .Linner_g5
+ sub $cnt, 8, $cnt
+!.Linner_g5
+ ldx [$tp+8], $tj ! tp[j]
+ addcc $alo, $hi0, $lo0
+ addxc $aj, %g0, $hi0 ! ahi=aj
+ addcc $lo0, $tj, $lo0 ! ap[j]*bp[i]+tp[j]
+ addxc %g0, $hi0, $hi0
+
+ addcc $nlo, $hi1, $lo1
+ addxc $nj, %g0, $hi1 ! nhi=nj
+ addcc $lo1, $lo0, $lo1 ! np[j]*m1+ap[j]*bp[i]+tp[j]
+ addxc %g0, $hi1, $hi1
+ stx $lo1, [$tp] ! tp[j-1]
+
+ subcc %g0, $ovf, %g0 ! move upmost overflow to CCR.xcc
+ addxccc $hi1, $hi0, $hi1
+ addxc %g0, %g0, $ovf
+ stx $hi1, [$tp+8]
+ add $tp, 16, $tp
+
+ brnz,pt $i, .Louter_g5
+ sub $i, 8, $i
+\f
+ sub $ap, $num, $ap ! rewind
+ sub $np, $num, $np
+ sub $tp, $num, $tp
+ ba .Lsub_g5
+ subcc $num, 8, $cnt ! cnt=num-1 and clear CCR.xcc
+
+.align 16
+.Lsub_g5:
+ ldx [$tp], $tj
+ add $tp, 8, $tp
+ ldx [$np+0], $nj
+ add $np, 8, $np
+ subccc $tj, $nj, $t2 ! tp[j]-np[j]
+ srlx $tj, 32, $tj
+ srlx $nj, 32, $nj
+ subccc $tj, $nj, $t3
+ add $rp, 8, $rp
+ st $t2, [$rp-4] ! reverse order
+ st $t3, [$rp-8]
+ brnz,pt $cnt, .Lsub_g5
+ sub $cnt, 8, $cnt
+
+ sub $np, $num, $np ! rewind
+ sub $tp, $num, $tp
+ sub $rp, $num, $rp
+
+ subc $ovf, %g0, $ovf ! handle upmost overflow bit
+ and $tp, $ovf, $ap
+ andn $rp, $ovf, $np
+ or $np, $ap, $ap ! ap=borrow?tp:rp
+ ba .Lcopy_g5
+ sub $num, 8, $cnt
+
+.align 16
+.Lcopy_g5: ! copy or in-place refresh
+ ldx [$ap+0], $t2
+ add $ap, 8, $ap
+ stx %g0, [$tp] ! zap
+ add $tp, 8, $tp
+ stx $t2, [$rp+0]
+ add $rp, 8, $rp
+ brnz $cnt, .Lcopy_g5
+ sub $cnt, 8, $cnt
+
+ mov 1, %o0
+ ret
+ restore
+.type bn_mul_mont_gather5_t4, #function
+.size bn_mul_mont_gather5_t4, .-bn_mul_mont_gather5_t4
+___
+}
+\f
+$code.=<<___;
+.globl bn_flip_t4
+.align 32
+bn_flip_t4:
+.Loop_flip:
+ ld [%o1+0], %o4
+ sub %o2, 1, %o2
+ ld [%o1+4], %o5
+ add %o1, 8, %o1
+ st %o5, [%o0+0]
+ st %o4, [%o0+4]
+ brnz %o2, .Loop_flip
+ add %o0, 8, %o0
+ retl
+ nop
+.type bn_flip_t4, #function
+.size bn_flip_t4, .-bn_flip_t4
+
+.globl bn_scatter5_t4
+.align 32
+bn_scatter5_t4:
+ sll %o3, 3, %o3
+ sub %o1, 1, %o1
+ add %o3, %o2, %o2 ! &pwrtbl[pwr]
+ nop
+.Loop_scatter5:
+ ldx [%o0], %g1 ! inp[i]
+ add %o0, 8, %o0
+ stx %g1, [%o2]
+ add %o2, 32*8, %o2
+ brnz %o1, .Loop_scatter5
+ sub %o1, 1, %o1
+ retl
+ nop
+.type bn_scatter5_t4, #function
+.size bn_scatter5_t4, .-bn_scatter5_t4
+
+.globl bn_gather5_t4
+.align 32
+bn_gather5_t4:
+ mov %o7, %o5
+___
+ &load_fcc("%o2","%o3","%o4");
+$code.=<<___;
+ mov %o5, %o7
+ sub %o1, 1, %o1
+.Loop_gather5:
+___
+ &load_f16("%o2");
+$code.=<<___;
+ std %f16, [%o0]
+ add %o0, 8, %o0
+ brnz %o1, .Loop_gather5
+ sub %o1, 1, %o1
+
+ retl
+ nop
+.type bn_gather5_t4, #function
+.size bn_gather5_t4, .-bn_gather5_t4
+___
+\f
+$code.=<<___;
+#define ONE 0x3f800000
+#define NUL 0x00000000
+#define NaN 0xffffffff
+
+.align 64
+.Lmagic:
+ .long ONE,NUL,NaN,NaN,NaN,NaN,NUL,ONE
+ .long NUL,ONE,ONE,NUL,NaN,NaN,NaN,NaN
+ .long NaN,NaN,NUL,ONE,ONE,NUL,NaN,NaN
+ .long NaN,NaN,NaN,NaN,NUL,ONE,ONE,NUL
+.asciz "Montgomery Multiplication for SPARC T4, David S. Miller, Andy Polyakov"
+.align 4
+___
+
+&emit_assembler();
+
+close STDOUT;
# endif
#endif
+#if defined(OPENSSL_BN_ASM_MONT) && defined(__sparc__)
+# include "sparc_arch.h"
+extern unsigned int OPENSSL_sparcv9cap_P[];
+#endif
+
/* maximum precomputation table size for *variable* sliding windows */
#define TABLE_SIZE 32
int powerbufLen = 0;
unsigned char *powerbuf=NULL;
BIGNUM tmp, am;
+#if defined(OPENSSL_BN_ASM_MONT) && defined(__sparc__)
+ unsigned int t4=0;
+#endif
bn_check_top(a);
bn_check_top(p);
/* Get the window size to use with size of p. */
window = BN_window_bits_for_ctime_exponent_size(bits);
+#if defined(OPENSSL_BN_ASM_MONT) && defined(__sparc__)
+ if (window>=5 && (top&15)==0 && top<=64 &&
+ (OPENSSL_sparcv9cap_P[1]&(CFR_MONTMUL|CFR_MONTSQR))==
+ (CFR_MONTMUL|CFR_MONTSQR) &&
+ (t4=OPENSSL_sparcv9cap_P[0]))
+ window=5;
+ else
+#endif
#if defined(OPENSSL_BN_ASM_MONT5)
if (window==6 && bits<=1024) window=5; /* ~5% improvement of 2048-bit RSA sign */
#endif
+ (void)0;
/* Allocate a buffer large enough to hold all of the pre-computed
* powers of am, am itself and tmp.
}
else if (!BN_to_montgomery(&am,a,mont,ctx)) goto err;
+#if defined(OPENSSL_BN_ASM_MONT) && defined(__sparc__)
+ if (t4)
+ {
+ typedef int (*bn_pwr5_mont_f)(BN_ULONG *tp,const BN_ULONG *np,
+ const BN_ULONG *n0,const void *table,int power);
+ int bn_pwr5_mont_t4_8(BN_ULONG *tp,const BN_ULONG *np,
+ const BN_ULONG *n0,const void *table,int power);
+ int bn_pwr5_mont_t4_16(BN_ULONG *tp,const BN_ULONG *np,
+ const BN_ULONG *n0,const void *table,int power);
+ int bn_pwr5_mont_t4_24(BN_ULONG *tp,const BN_ULONG *np,
+ const BN_ULONG *n0,const void *table,int power);
+ int bn_pwr5_mont_t4_32(BN_ULONG *tp,const BN_ULONG *np,
+ const BN_ULONG *n0,const void *table,int power);
+ static const bn_pwr5_mont_f funcs[4] = {
+ bn_pwr5_mont_t4_8, bn_pwr5_mont_t4_16,
+ bn_pwr5_mont_t4_24, bn_pwr5_mont_t4_32 };
+ bn_pwr5_mont_f worker = funcs[top/16-1];
+
+ void bn_mul_mont_t4(BN_ULONG *rp,const BN_ULONG *ap,
+ const void *bp,const BN_ULONG *np,
+ const BN_ULONG *n0,int num);
+ void bn_mul_mont_gather5_t4(BN_ULONG *rp,const BN_ULONG *ap,
+ const void *table,const BN_ULONG *np,
+ const BN_ULONG *n0,int num,int power);
+ void bn_scatter5_t4(const BN_ULONG *inp,size_t num,
+ void *table,size_t power);
+ void bn_gather5_t4(BN_ULONG *out,size_t num,
+ void *table,size_t power);
+ void bn_flip_t4(BN_ULONG *dst,BN_ULONG *src,size_t num);
+
+ BN_ULONG *np=alloca(top*sizeof(BN_ULONG)), *n0=mont->n0;
+
+ /* BN_to_montgomery can contaminate words above .top
+ * [in BN_DEBUG[_DEBUG] build]... */
+ for (i=am.top; i<top; i++) am.d[i]=0;
+ for (i=tmp.top; i<top; i++) tmp.d[i]=0;
+
+ /* switch to 64-bit domain */
+ top /= 2;
+ bn_flip_t4(np,mont->N.d,top);
+ bn_flip_t4(tmp.d,tmp.d,top);
+ bn_flip_t4(am.d,am.d,top);
+
+ bn_scatter5_t4(tmp.d,top,powerbuf,0);
+ bn_scatter5_t4(am.d,top,powerbuf,1);
+ bn_mul_mont_t4(tmp.d,am.d,am.d,np,n0,top);
+ bn_scatter5_t4(tmp.d,top,powerbuf,2);
+
+ for (i=3; i<32; i++)
+ {
+ /* Calculate a^i = a^(i-1) * a */
+ bn_mul_mont_gather5_t4(tmp.d,am.d,powerbuf,np,n0,top,i-1);
+ bn_scatter5_t4(tmp.d,top,powerbuf,i);
+ }
+
+ bits--;
+ for (wvalue=0, i=bits%5; i>=0; i--,bits--)
+ wvalue = (wvalue<<1)+BN_is_bit_set(p,bits);
+ bn_gather5_t4(tmp.d,top,powerbuf,wvalue);
+
+ /* Scan the exponent one window at a time starting from the most
+ * significant bits.
+ */
+ while (bits >= 0)
+ {
+ for (wvalue=0, i=0; i<5; i++,bits--)
+ wvalue = (wvalue<<1)+BN_is_bit_set(p,bits);
+
+ if ((*worker)(tmp.d,np,n0,powerbuf,wvalue)) continue;
+ /* retry once and fall back */
+ if ((*worker)(tmp.d,np,n0,powerbuf,wvalue)) continue;
+ bn_mul_mont_t4(tmp.d,tmp.d,tmp.d,np,n0,top);
+ bn_mul_mont_t4(tmp.d,tmp.d,tmp.d,np,n0,top);
+ bn_mul_mont_t4(tmp.d,tmp.d,tmp.d,np,n0,top);
+ bn_mul_mont_t4(tmp.d,tmp.d,tmp.d,np,n0,top);
+ bn_mul_mont_t4(tmp.d,tmp.d,tmp.d,np,n0,top);
+ bn_mul_mont_gather5_t4(tmp.d,tmp.d,powerbuf,np,n0,top,wvalue);
+ }
+
+ bn_flip_t4(tmp.d,tmp.d,top);
+ top *= 2;
+ /* back to 32-bit domain */
+ tmp.top=top;
+ bn_correct_top(&tmp);
+ OPENSSL_cleanse(np,top*sizeof(BN_ULONG));
+ }
+ else
+#endif
#if defined(OPENSSL_BN_ASM_MONT5)
/* This optimization uses ideas from http://eprint.iacr.org/2011/239,
* specifically optimization of cache-timing attack countermeasures
projects / openssl.git / commitdiff