#! /usr/bin/env perl
-# Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
+# Copyright 2015-2020 The OpenSSL Project Authors. All Rights Reserved.
#
-# Licensed under the OpenSSL license (the "License"). You may not use
+# Licensed under the Apache License 2.0 (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
use POSIX;
use File::Basename;
use File::Copy;
-use OpenSSL::Test qw/:DEFAULT with bldtop_file srctop_file cmdstr/;
+use OpenSSL::Test qw/:DEFAULT with bldtop_file bldtop_dir srctop_file srctop_dir cmdstr/;
use OpenSSL::Test::Utils;
+BEGIN {
setup("test_ssl");
+}
-$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
+use lib srctop_dir('Configurations');
+use lib bldtop_dir('.');
+use platform;
+my $no_fips = disabled('fips') || ($ENV{NO_FIPS} // 0);
my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_psk,
$no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2, $no_tls1_3,
$no_dtls, $no_dtls1, $no_dtls1_2, $no_ct) =
my @reqcmd = ("openssl", "req");
my @x509cmd = ("openssl", "x509", $digest);
my @verifycmd = ("openssl", "verify");
-my @gendsacmd = ("openssl", "gendsa");
+my @genpkeycmd = ("openssl", "genpkey");
my $dummycnf = srctop_file("apps", "openssl.cnf");
+my $cnf = srctop_file("test", "ca-and-certs.cnf");
my $CAkey = "keyCA.ss";
my $CAcert="certCA.ss";
my $CAserial="certCA.srl";
my $CAreq="reqCA.ss";
-my $CAconf=srctop_file("test","CAss.cnf");
my $CAreq2="req2CA.ss"; # temp
-
-my $Uconf=srctop_file("test","Uss.cnf");
my $Ukey="keyU.ss";
my $Ureq="reqU.ss";
my $Ucert="certU.ss";
-
my $Dkey="keyD.ss";
my $Dreq="reqD.ss";
my $Dcert="certD.ss";
-
my $Ekey="keyE.ss";
my $Ereq="reqE.ss";
my $Ecert="certE.ss";
-my $P1conf=srctop_file("test","P1ss.cnf");
+my $proxycnf=srctop_file("test", "proxy.cnf");
my $P1key="keyP1.ss";
my $P1req="reqP1.ss";
my $P1cert="certP1.ss";
my $P1intermediate="tmp_intP1.ss";
-
-my $P2conf=srctop_file("test","P2ss.cnf");
my $P2key="keyP2.ss";
my $P2req="reqP2.ss";
my $P2cert="certP2.ss";
# If you're adding tests here, you probably want to convert them to the
# new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead.
plan tests =>
- 1 # For testss
- +5 # For the first testssl
+ ($no_fips ? 0 : 1 + 5) # For fipsinstall + testssl with fips provider
+ + 1 # For testss
+ + 5 # For the testssl with default provider
;
+unless ($no_fips) {
+ ok(run(app(['openssl', 'fipsinstall',
+ '-out', bldtop_file('providers', 'fipsmodule.cnf'),
+ '-module', bldtop_file('providers', platform->dso('fips')),
+ '-provider_name', 'fips', '-mac_name', 'HMAC',
+ '-macopt', 'digest:SHA256', '-macopt', 'hexkey:00',
+ '-section_name', 'fips_sect'])),
+ "fipsinstall");
+}
+
subtest 'test_ss' => sub {
if (testss()) {
open OUT, ">", "intP1.ss";
};
note('test_ssl -- key U');
-testssl("keyU.ss", $Ucert, $CAcert);
+testssl("keyU.ss", $Ucert, $CAcert, "default", srctop_file("test","default.cnf"));
+unless ($no_fips) {
+ testssl("keyU.ss", $Ucert, $CAcert, "fips", srctop_file("test","fips.cnf"));
+}
# -----------
# subtest functions
sub testss {
- open RND, ">>", ".rnd";
- print RND "string to make the random number generator think it has randomness";
- close RND;
-
my @req_dsa = ("-newkey",
"dsa:".srctop_file("apps", "dsa1024.pem"));
my $dsaparams = srctop_file("apps", "dsa1024.pem");
SKIP: {
skip 'failure', 16 unless
- ok(run(app([@reqcmd, "-config", $CAconf,
+ ok(run(app([@reqcmd, "-config", $cnf,
"-out", $CAreq, "-keyout", $CAkey,
@req_new])),
'make cert request');
skip 'failure', 15 unless
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
"-req", "-out", $CAcert, "-signkey", $CAkey,
- "-extfile", $CAconf, "-extensions", "v3_ca"],
+ "-extfile", $cnf, "-extensions", "v3_ca"],
stdout => "err.ss")),
'convert request into self-signed cert');
'verify signature');
skip 'failure', 10 unless
- ok(run(app([@reqcmd, "-config", $Uconf,
+ ok(run(app([@reqcmd, "-config", $cnf, "-section", "userreq",
"-out", $Ureq, "-keyout", $Ukey, @req_new],
stdout => "err.ss")),
'make a user cert request');
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
"-req", "-out", $Ucert,
"-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
- "-extfile", $Uconf, "-extensions", "v3_ee"],
+ "-extfile", $cnf, "-extensions", "v3_ee"],
stdout => "err.ss"))
&& run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
'sign user cert request');
SKIP: {
$ENV{CN2} = "DSA Certificate";
skip 'failure', 4 unless
- ok(run(app([@gendsacmd, "-out", $Dkey,
- $dsaparams],
+ ok(run(app([@genpkeycmd, "-out", $Dkey,
+ "-paramfile", $dsaparams],
stdout => "err.ss")),
"make a DSA key");
skip 'failure', 3 unless
- ok(run(app([@reqcmd, "-new", "-config", $Uconf,
+ ok(run(app([@reqcmd, "-new", "-config", $cnf,
+ "-section", "userreq",
"-out", $Dreq, "-key", $Dkey],
stdout => "err.ss")),
"make a DSA user cert request");
"-out", $Dcert,
"-CA", $CAcert, "-CAkey", $CAkey,
"-CAserial", $CAserial,
- "-extfile", $Uconf,
+ "-extfile", $cnf,
"-extensions", "v3_ee_dsa"],
stdout => "err.ss")),
"sign DSA user cert request");
SKIP: {
$ENV{CN2} = "ECDSA Certificate";
skip 'failure', 4 unless
- ok(run(app(["openssl", "ecparam", "-name", "P-256",
+ ok(run(app(["openssl", "genpkey", "-genparam",
+ "-algorithm", "EC",
+ "-pkeyopt", "ec_paramgen_curve:P-256",
+ "-pkeyopt", "ec_param_enc:named_curve",
"-out", "ecp.ss"])),
"make EC parameters");
skip 'failure', 3 unless
- ok(run(app([@reqcmd, "-config", $Uconf,
+ ok(run(app([@reqcmd, "-config", $cnf,
+ "-section", "userreq",
"-out", $Ereq, "-keyout", $Ekey,
"-newkey", "ec:ecp.ss"],
stdout => "err.ss")),
"-out", $Ecert,
"-CA", $CAcert, "-CAkey", $CAkey,
"-CAserial", $CAserial,
- "-extfile", $Uconf,
+ "-extfile", $cnf,
"-extensions", "v3_ee_ec"],
stdout => "err.ss")),
"sign ECDSA/ECDH user cert request");
};
skip 'failure', 5 unless
- ok(run(app([@reqcmd, "-config", $P1conf,
+ ok(run(app([@reqcmd, "-config", $proxycnf,
"-out", $P1req, "-keyout", $P1key, @req_new],
stdout => "err.ss")),
'make a proxy cert request');
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",
"-req", "-out", $P1cert,
"-CA", $Ucert, "-CAkey", $Ukey,
- "-extfile", $P1conf, "-extensions", "v3_proxy"],
+ "-extfile", $proxycnf, "-extensions", "proxy"],
stdout => "err.ss")),
'sign proxy with user cert');
'Certificate details');
skip 'failure', 2 unless
- ok(run(app([@reqcmd, "-config", $P2conf,
+ ok(run(app([@reqcmd, "-config", $proxycnf, "-section", "proxy2_req",
"-out", $P2req, "-keyout", $P2key,
@req_new],
stdout => "err.ss")),
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",
"-req", "-out", $P2cert,
"-CA", $P1cert, "-CAkey", $P1key,
- "-extfile", $P2conf, "-extensions", "v3_proxy"],
+ "-extfile", $proxycnf, "-extensions", "proxy_2"],
stdout => "err.ss")),
'sign second proxy cert request with the first proxy cert');
}
sub testssl {
- my ($key, $cert, $CAtmp) = @_;
+ my ($key, $cert, $CAtmp, $provider, $configfile) = @_;
my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));
my @ssltest = ("ssltest_old",
"-s_key", $key, "-s_cert", $cert,
- "-c_key", $key, "-c_cert", $cert);
+ "-c_key", $key, "-c_cert", $cert,
+ "-provider", $provider,
+ "-config", $configfile);
my $serverinfo = srctop_file("test","serverinfo.pem");
skip "SSLv3 is not supported by this OpenSSL build", 4
if disabled("ssl3");
+ skip "SSLv3 is not supported by the FIPS provider", 4
+ if $provider eq "fips";
+
ok(run(test([@ssltest, "-bio_pair", "-ssl3"])),
'test sslv3 via BIO pair');
ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA])),
subtest "Testing ciphersuites" => sub {
my @exkeys = ();
- my $ciphers = "-EXP:-PSK:-SRP:-kDH:-kECDHe";
+ my $ciphers = "-PSK:-SRP";
- if ($no_dh) {
- note "skipping DHE tests\n";
- $ciphers .= ":-kDHE";
- }
- if ($no_dsa) {
- note "skipping DSA tests\n";
- $ciphers .= ":-aDSA";
- } else {
+ if (!$no_dsa) {
push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";
}
- if ($no_ec) {
- note "skipping EC tests\n";
- $ciphers .= ":!aECDSA:!kECDH";
- } else {
+ if (!$no_ec) {
push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";
}
# We only use the flags that ssltest_old understands
push @protocols, "-tls1_3" unless $no_tls1_3;
push @protocols, "-tls1_2" unless $no_tls1_2;
- push @protocols, "-tls1" unless $no_tls1;
- push @protocols, "-ssl3" unless $no_ssl3;
+ push @protocols, "-tls1" unless $no_tls1 || $provider eq "fips";
+ push @protocols, "-ssl3" unless $no_ssl3 || $provider eq "fips";
my $protocolciphersuitecount = 0;
my %ciphersuites = ();
my %ciphersstatus = ();
my @ciphers = run(app(["openssl", "ciphers", "-s", $protocol,
"ALL:$ciphers"]),
capture => 1, statusvar => \$ciphersstatus);
+ @ciphers = grep {!/CAMELLIA|ARIA|CHACHA/} @ciphers;
$ciphersstatus{$protocol} = $ciphersstatus;
if ($ciphersstatus) {
$ciphersuites{$protocol} = [ map { s|\R||; split(/:/, $_) }
plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build"
if $protocolciphersuitecount + scalar(keys %ciphersuites) == 0;
- # The count of protocols is because in addition to the ciphersuits
- # we got above, we're running a weak DH test for each protocol
- plan tests => scalar(@protocols) + $protocolciphersuitecount
- + scalar(keys %ciphersuites);
+ # The count of protocols is because in addition to the ciphersuites
+ # we got above, we're running a weak DH test for each protocol (except
+ # TLSv1.3)
+ my $testcount = scalar(@protocols) + $protocolciphersuitecount
+ + scalar(keys %ciphersuites);
+ $testcount-- unless $no_tls1_3;
+ plan tests => $testcount;
foreach my $protocol (@protocols) {
ok($ciphersstatus{$protocol}, "Getting ciphers for $protocol");
# ssltest_old doesn't know -tls1_3, but that's fine, since that's
# the default choice if TLSv1.3 enabled
my $flag = $protocol eq "-tls1_3" ? "" : $protocol;
+ my $ciphersuites = "";
foreach my $cipher (@{$ciphersuites{$protocol}}) {
if ($protocol eq "-ssl3" && $cipher =~ /ECDH/ ) {
note "*****SKIPPING $protocol $cipher";
ok(1);
} else {
- ok(run(test([@ssltest, @exkeys, "-cipher", $cipher, $flag])),
- "Testing $cipher");
+ if ($protocol eq "-tls1_3") {
+ $ciphersuites = $cipher;
+ $cipher = "";
+ }
+ ok(run(test([@ssltest, @exkeys, "-cipher", $cipher,
+ "-ciphersuites", $ciphersuites, $flag || ()])),
+ "Testing $cipher");
}
}
+ next if $protocol eq "-tls1_3";
is(run(test([@ssltest,
"-s_cipher", "EDH",
"-c_cipher", 'EDH:@SECLEVEL=1',
"-dhe512",
- $protocol eq "SSLv3" ? ("-ssl3") : ()])), 0,
+ $protocol])), 0,
"testing connection with weak DH, expecting failure");
}
};
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 5
- if $no_tls1;
+ if $no_tls1 || $provider eq "fips";
SKIP: {
skip "skipping anonymous DH tests", 1
skip "skipping RSA tests", 2
if $no_rsa;
- ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time"])),
+ ok(run(test(["ssltest_old", "-provider", "default", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time"])),
'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
skip "skipping RSA+DHE tests", 1
if $no_dh;
- ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time"])),
+ ok(run(test(["ssltest_old", "-provider", "default", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time"])),
'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
}
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 1
- if $no_tls1;
+ if $no_tls1 || $provider eq "fips";
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
'test tls1 with custom extensions');
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 5
- if $no_tls1;
+ if $no_tls1 || $provider eq "fips";
note('echo test tls1 with serverinfo');
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
}
};
}
-
-unlink $CAkey;
-unlink $CAcert;
-unlink $CAserial;
-unlink $CAreq;
-unlink $CAreq2;
-
-unlink $Ukey;
-unlink $Ureq;
-unlink $Ucert;
-unlink basename($Ucert, '.ss').'.srl';
-
-unlink $Dkey;
-unlink $Dreq;
-unlink $Dcert;
-
-unlink $Ekey;
-unlink $Ereq;
-unlink $Ecert;
-
-unlink $P1key;
-unlink $P1req;
-unlink $P1cert;
-unlink basename($P1cert, '.ss').'.srl';
-unlink $P1intermediate;
-unlink "intP1.ss";
-
-unlink $P2key;
-unlink $P2req;
-unlink $P2cert;
-unlink $P2intermediate;
-unlink "intP2.ss";
-
-unlink "ecp.ss";
-unlink "err.ss";
-
-unlink $server_sess;
-unlink $client_sess;
projects / openssl.git / blobdiff