-#! /usr/bin/perl
+#! /usr/bin/env perl
+# Copyright 2015-2020 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the Apache License 2.0 (the "License"). You may not use
+# this file except in compliance with the License. You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
use strict;
use warnings;
use POSIX;
-use File::Spec;
+use File::Basename;
use File::Copy;
-use OpenSSL::Test qw/:DEFAULT with bldtop_file srctop_file cmdstr/;
+use OpenSSL::Test qw/:DEFAULT with bldtop_file bldtop_dir srctop_file srctop_dir cmdstr/;
use OpenSSL::Test::Utils;
+BEGIN {
setup("test_ssl");
+}
-$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
+use lib srctop_dir('Configurations');
+use lib bldtop_dir('.');
+use platform;
-my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_srp, $no_psk,
- $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2,
+my $no_fips = disabled('fips') || ($ENV{NO_FIPS} // 0);
+my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_psk,
+ $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2, $no_tls1_3,
$no_dtls, $no_dtls1, $no_dtls1_2, $no_ct) =
- anydisabled qw/rsa dsa dh ec srp psk
- ssl3 tls1 tls1_1 tls1_2
+ anydisabled qw/rsa dsa dh ec psk
+ ssl3 tls1 tls1_1 tls1_2 tls1_3
dtls dtls1 dtls1_2 ct/;
my $no_anytls = alldisabled(available_protocols("tls"));
my $no_anydtls = alldisabled(available_protocols("dtls"));
my @reqcmd = ("openssl", "req");
my @x509cmd = ("openssl", "x509", $digest);
my @verifycmd = ("openssl", "verify");
+my @genpkeycmd = ("openssl", "genpkey");
my $dummycnf = srctop_file("apps", "openssl.cnf");
+my $cnf = srctop_file("test", "ca-and-certs.cnf");
my $CAkey = "keyCA.ss";
my $CAcert="certCA.ss";
my $CAserial="certCA.srl";
my $CAreq="reqCA.ss";
-my $CAconf=srctop_file("test","CAss.cnf");
my $CAreq2="req2CA.ss"; # temp
-
-my $Uconf=srctop_file("test","Uss.cnf");
my $Ukey="keyU.ss";
my $Ureq="reqU.ss";
my $Ucert="certU.ss";
-
my $Dkey="keyD.ss";
my $Dreq="reqD.ss";
my $Dcert="certD.ss";
-
my $Ekey="keyE.ss";
my $Ereq="reqE.ss";
my $Ecert="certE.ss";
-my $P1conf=srctop_file("test","P1ss.cnf");
+my $proxycnf=srctop_file("test", "proxy.cnf");
my $P1key="keyP1.ss";
my $P1req="reqP1.ss";
my $P1cert="certP1.ss";
my $P1intermediate="tmp_intP1.ss";
-
-my $P2conf=srctop_file("test","P2ss.cnf");
my $P2key="keyP2.ss";
my $P2req="reqP2.ss";
my $P2cert="certP2.ss";
# If you're adding tests here, you probably want to convert them to the
# new format in ssl_test.c and add recipes to 80-test_ssl_new.t instead.
plan tests =>
- 1 # For testss
- + 1 # For ssltest_old -test_cipherlist
- + 14 # For the first testssl
- + 16 # For the first testsslproxy
- + 16 # For the second testsslproxy
+ ($no_fips ? 0 : 1 + 5) # For fipsinstall + testssl with fips provider
+ + 1 # For testss
+ + 5 # For the testssl with default provider
;
+unless ($no_fips) {
+ ok(run(app(['openssl', 'fipsinstall',
+ '-out', bldtop_file('providers', 'fipsmodule.cnf'),
+ '-module', bldtop_file('providers', platform->dso('fips')),
+ '-provider_name', 'fips', '-mac_name', 'HMAC',
+ '-macopt', 'digest:SHA256', '-macopt', 'hexkey:00',
+ '-section_name', 'fips_sect'])),
+ "fipsinstall");
+}
+
subtest 'test_ss' => sub {
if (testss()) {
open OUT, ">", "intP1.ss";
}
};
-my $check = ok(run(test(["ssltest_old","-test_cipherlist"])), "running ssltest_old");
-
- SKIP: {
- skip "ssltest_old ended with error, skipping the rest", 3
- if !$check;
-
- note('test_ssl -- key U');
- testssl("keyU.ss", $Ucert, $CAcert);
-
- note('test_ssl -- key P1');
- testsslproxy("keyP1.ss", "certP1.ss", "intP1.ss", "AB");
-
- note('test_ssl -- key P2');
- testsslproxy("keyP2.ss", "certP2.ss", "intP2.ss", "BC");
- }
+note('test_ssl -- key U');
+testssl("keyU.ss", $Ucert, $CAcert, "default", srctop_file("test","default.cnf"));
+unless ($no_fips) {
+ testssl("keyU.ss", $Ucert, $CAcert, "fips", srctop_file("test","fips.cnf"));
+}
# -----------
# subtest functions
sub testss {
- open RND, ">>", ".rnd";
- print RND "string to make the random number generator think it has entropy";
- close RND;
-
my @req_dsa = ("-newkey",
"dsa:".srctop_file("apps", "dsa1024.pem"));
+ my $dsaparams = srctop_file("apps", "dsa1024.pem");
my @req_new;
if ($no_rsa) {
@req_new = @req_dsa;
SKIP: {
skip 'failure', 16 unless
- ok(run(app([@reqcmd, "-config", $CAconf,
+ ok(run(app([@reqcmd, "-config", $cnf,
"-out", $CAreq, "-keyout", $CAkey,
@req_new])),
'make cert request');
skip 'failure', 15 unless
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
"-req", "-out", $CAcert, "-signkey", $CAkey,
- "-extfile", $CAconf, "-extensions", "v3_ca"],
+ "-extfile", $cnf, "-extensions", "v3_ca"],
stdout => "err.ss")),
'convert request into self-signed cert');
'verify signature');
skip 'failure', 10 unless
- ok(run(app([@reqcmd, "-config", $Uconf,
+ ok(run(app([@reqcmd, "-config", $cnf, "-section", "userreq",
"-out", $Ureq, "-keyout", $Ukey, @req_new],
stdout => "err.ss")),
'make a user cert request');
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
"-req", "-out", $Ucert,
"-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
- "-extfile", $Uconf, "-extensions", "v3_ee"],
+ "-extfile", $cnf, "-extensions", "v3_ee"],
stdout => "err.ss"))
&& run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
'sign user cert request');
plan skip_all => "skipping DSA certificate creation"
if $no_dsa;
- plan tests => 4;
+ plan tests => 5;
SKIP: {
$ENV{CN2} = "DSA Certificate";
+ skip 'failure', 4 unless
+ ok(run(app([@genpkeycmd, "-out", $Dkey,
+ "-paramfile", $dsaparams],
+ stdout => "err.ss")),
+ "make a DSA key");
skip 'failure', 3 unless
- ok(run(app([@reqcmd, "-config", $Uconf,
- "-out", $Dreq, "-keyout", $Dkey,
- @req_dsa],
+ ok(run(app([@reqcmd, "-new", "-config", $cnf,
+ "-section", "userreq",
+ "-out", $Dreq, "-key", $Dkey],
stdout => "err.ss")),
"make a DSA user cert request");
skip 'failure', 2 unless
"-out", $Dcert,
"-CA", $CAcert, "-CAkey", $CAkey,
"-CAserial", $CAserial,
- "-extfile", $Uconf,
+ "-extfile", $cnf,
"-extensions", "v3_ee_dsa"],
stdout => "err.ss")),
"sign DSA user cert request");
SKIP: {
$ENV{CN2} = "ECDSA Certificate";
skip 'failure', 4 unless
- ok(run(app(["openssl", "ecparam", "-name", "P-256",
+ ok(run(app(["openssl", "genpkey", "-genparam",
+ "-algorithm", "EC",
+ "-pkeyopt", "ec_paramgen_curve:P-256",
+ "-pkeyopt", "ec_param_enc:named_curve",
"-out", "ecp.ss"])),
"make EC parameters");
skip 'failure', 3 unless
- ok(run(app([@reqcmd, "-config", $Uconf,
+ ok(run(app([@reqcmd, "-config", $cnf,
+ "-section", "userreq",
"-out", $Ereq, "-keyout", $Ekey,
"-newkey", "ec:ecp.ss"],
stdout => "err.ss")),
"-out", $Ecert,
"-CA", $CAcert, "-CAkey", $CAkey,
"-CAserial", $CAserial,
- "-extfile", $Uconf,
+ "-extfile", $cnf,
"-extensions", "v3_ee_ec"],
stdout => "err.ss")),
"sign ECDSA/ECDH user cert request");
};
skip 'failure', 5 unless
- ok(run(app([@reqcmd, "-config", $P1conf,
+ ok(run(app([@reqcmd, "-config", $proxycnf,
"-out", $P1req, "-keyout", $P1key, @req_new],
stdout => "err.ss")),
'make a proxy cert request');
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P1req, "-days", "30",
"-req", "-out", $P1cert,
"-CA", $Ucert, "-CAkey", $Ukey,
- "-extfile", $P1conf, "-extensions", "v3_proxy"],
+ "-extfile", $proxycnf, "-extensions", "proxy"],
stdout => "err.ss")),
'sign proxy with user cert');
'Certificate details');
skip 'failure', 2 unless
- ok(run(app([@reqcmd, "-config", $P2conf,
+ ok(run(app([@reqcmd, "-config", $proxycnf, "-section", "proxy2_req",
"-out", $P2req, "-keyout", $P2key,
@req_new],
stdout => "err.ss")),
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $P2req, "-days", "30",
"-req", "-out", $P2cert,
"-CA", $P1cert, "-CAkey", $P1key,
- "-extfile", $P2conf, "-extensions", "v3_proxy"],
+ "-extfile", $proxycnf, "-extensions", "proxy_2"],
stdout => "err.ss")),
'sign second proxy cert request with the first proxy cert');
}
sub testssl {
- my $key = shift || bldtop_file("apps","server.pem");
- my $cert = shift || bldtop_file("apps","server.pem");
- my $CAtmp = shift;
+ my ($key, $cert, $CAtmp, $provider, $configfile) = @_;
my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));
- my @extra = @_;
my @ssltest = ("ssltest_old",
"-s_key", $key, "-s_cert", $cert,
- "-c_key", $key, "-c_cert", $cert);
+ "-c_key", $key, "-c_cert", $cert,
+ "-provider", $provider,
+ "-config", $configfile);
my $serverinfo = srctop_file("test","serverinfo.pem");
subtest 'standard SSL tests' => sub {
######################################################################
- plan tests => 29;
+ plan tests => 13;
SKIP: {
skip "SSLv3 is not supported by this OpenSSL build", 4
if disabled("ssl3");
- ok(run(test([@ssltest, "-ssl3", @extra])),
- 'test sslv3');
- ok(run(test([@ssltest, "-ssl3", "-server_auth", @CA, @extra])),
- 'test sslv3 with server authentication');
- ok(run(test([@ssltest, "-ssl3", "-client_auth", @CA, @extra])),
- 'test sslv3 with client authentication');
- ok(run(test([@ssltest, "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
- 'test sslv3 with both server and client authentication');
- }
-
- SKIP: {
- skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 4
- if $no_anytls;
+ skip "SSLv3 is not supported by the FIPS provider", 4
+ if $provider eq "fips";
- ok(run(test([@ssltest, @extra])),
- 'test sslv2/sslv3');
- ok(run(test([@ssltest, "-server_auth", @CA, @extra])),
- 'test sslv2/sslv3 with server authentication');
- ok(run(test([@ssltest, "-client_auth", @CA, @extra])),
- 'test sslv2/sslv3 with client authentication');
- ok(run(test([@ssltest, "-server_auth", "-client_auth", @CA, @extra])),
- 'test sslv2/sslv3 with both server and client authentication');
- }
-
- SKIP: {
- skip "SSLv3 is not supported by this OpenSSL build", 4
- if disabled("ssl3");
-
- ok(run(test([@ssltest, "-bio_pair", "-ssl3", @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-ssl3"])),
'test sslv3 via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA])),
'test sslv3 with server authentication via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA])),
'test sslv3 with client authentication via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA])),
'test sslv3 with both server and client authentication via BIO pair');
}
skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1
if $no_anytls;
- ok(run(test([@ssltest, "-bio_pair", @extra])),
+ ok(run(test([@ssltest, "-bio_pair"])),
'test sslv2/sslv3 via BIO pair');
}
- SKIP: {
- skip "DTLSv1 is not supported by this OpenSSL build", 4
- if disabled("dtls1");
-
- ok(run(test([@ssltest, "-dtls1", @extra])),
- 'test dtlsv1');
- ok(run(test([@ssltest, "-dtls1", "-server_auth", @CA, @extra])),
- 'test dtlsv1 with server authentication');
- ok(run(test([@ssltest, "-dtls1", "-client_auth", @CA, @extra])),
- 'test dtlsv1 with client authentication');
- ok(run(test([@ssltest, "-dtls1", "-server_auth", "-client_auth", @CA, @extra])),
- 'test dtlsv1 with both server and client authentication');
- }
-
- SKIP: {
- skip "DTLSv1.2 is not supported by this OpenSSL build", 4
- if disabled("dtls1_2");
-
- ok(run(test([@ssltest, "-dtls12", @extra])),
- 'test dtlsv1.2');
- ok(run(test([@ssltest, "-dtls12", "-server_auth", @CA, @extra])),
- 'test dtlsv1.2 with server authentication');
- ok(run(test([@ssltest, "-dtls12", "-client_auth", @CA, @extra])),
- 'test dtlsv1.2 with client authentication');
- ok(run(test([@ssltest, "-dtls12", "-server_auth", "-client_auth", @CA, @extra])),
- 'test dtlsv1.2 with both server and client authentication');
- }
-
SKIP: {
skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 8
if $no_anytls;
SKIP: {
skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;
- ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe", @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe"])),
'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
}
- ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v", @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v"])),
'test sslv2/sslv3 with 1024bit DHE via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA])),
'test sslv2/sslv3 with server authentication');
- ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA])),
'test sslv2/sslv3 with client authentication via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA, @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA])),
'test sslv2/sslv3 with both client and server authentication via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA, @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA])),
'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
SKIP: {
skip "No IPv4 available on this machine", 1
unless !disabled("sock") && have_IPv4();
- ok(run(test([@ssltest, "-ipv4", @extra])),
+ ok(run(test([@ssltest, "-ipv4"])),
'test TLS via IPv4');
}
SKIP: {
skip "No IPv6 available on this machine", 1
unless !disabled("sock") && have_IPv6();
- ok(run(test([@ssltest, "-ipv6", @extra])),
+ ok(run(test([@ssltest, "-ipv6"])),
'test TLS via IPv6');
}
}
subtest "Testing ciphersuites" => sub {
my @exkeys = ();
- my $ciphers = "-EXP:-PSK:-SRP:-kDH:-kECDHe";
+ my $ciphers = "-PSK:-SRP";
- if ($no_dh) {
- note "skipping DHE tests\n";
- $ciphers .= ":-kDHE";
- }
- if ($no_dsa) {
- note "skipping DSA tests\n";
- $ciphers .= ":-aDSA";
- } else {
+ if (!$no_dsa) {
push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";
}
- if ($no_ec) {
- note "skipping EC tests\n";
- $ciphers .= ":!aECDSA:!kECDH";
- } else {
+ if (!$no_ec) {
push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";
}
my @protocols = ();
- # FIXME: I feel unsure about the following line, is that really just TLSv1.2, or is it all of the SSLv3/TLS protocols?
- push(@protocols, "TLSv1.2") unless $no_tls1_2;
- push(@protocols, "SSLv3") unless $no_ssl3;
- my $protocolciphersuitcount = 0;
- my %ciphersuites =
- map { my @c =
- map { split(/:/, $_) }
- run(app(["openssl", "ciphers", "${_}:$ciphers"]),
- capture => 1);
- map { s/\R//; } @c; # chomp @c;
- $protocolciphersuitcount += scalar @c;
- $_ => [ @c ] } @protocols;
+ # We only use the flags that ssltest_old understands
+ push @protocols, "-tls1_3" unless $no_tls1_3;
+ push @protocols, "-tls1_2" unless $no_tls1_2;
+ push @protocols, "-tls1" unless $no_tls1 || $provider eq "fips";
+ push @protocols, "-ssl3" unless $no_ssl3 || $provider eq "fips";
+ my $protocolciphersuitecount = 0;
+ my %ciphersuites = ();
+ my %ciphersstatus = ();
+ foreach my $protocol (@protocols) {
+ my $ciphersstatus = undef;
+ my @ciphers = run(app(["openssl", "ciphers", "-s", $protocol,
+ "ALL:$ciphers"]),
+ capture => 1, statusvar => \$ciphersstatus);
+ @ciphers = grep {!/CAMELLIA|ARIA|CHACHA/} @ciphers;
+ $ciphersstatus{$protocol} = $ciphersstatus;
+ if ($ciphersstatus) {
+ $ciphersuites{$protocol} = [ map { s|\R||; split(/:/, $_) }
+ @ciphers ];
+ $protocolciphersuitecount += scalar @{$ciphersuites{$protocol}};
+ }
+ }
plan skip_all => "None of the ciphersuites to test are available in this OpenSSL build"
- if $protocolciphersuitcount + scalar(@protocols) == 0;
-
- # The count of protocols is because in addition to the ciphersuits
- # we got above, we're running a weak DH test for each protocol
- plan tests => $protocolciphersuitcount + scalar(@protocols);
+ if $protocolciphersuitecount + scalar(keys %ciphersuites) == 0;
+
+ # The count of protocols is because in addition to the ciphersuites
+ # we got above, we're running a weak DH test for each protocol (except
+ # TLSv1.3)
+ my $testcount = scalar(@protocols) + $protocolciphersuitecount
+ + scalar(keys %ciphersuites);
+ $testcount-- unless $no_tls1_3;
+ plan tests => $testcount;
+
+ foreach my $protocol (@protocols) {
+ ok($ciphersstatus{$protocol}, "Getting ciphers for $protocol");
+ }
- foreach my $protocol (@protocols) {
- note "Testing ciphersuites for $protocol";
- foreach my $cipher (@{$ciphersuites{$protocol}}) {
- ok(run(test([@ssltest, @exkeys, "-cipher", $cipher,
- $protocol eq "SSLv3" ? ("-ssl3") : ()])),
- "Testing $cipher");
- }
+ foreach my $protocol (sort keys %ciphersuites) {
+ note "Testing ciphersuites for $protocol";
+ # ssltest_old doesn't know -tls1_3, but that's fine, since that's
+ # the default choice if TLSv1.3 enabled
+ my $flag = $protocol eq "-tls1_3" ? "" : $protocol;
+ my $ciphersuites = "";
+ foreach my $cipher (@{$ciphersuites{$protocol}}) {
+ if ($protocol eq "-ssl3" && $cipher =~ /ECDH/ ) {
+ note "*****SKIPPING $protocol $cipher";
+ ok(1);
+ } else {
+ if ($protocol eq "-tls1_3") {
+ $ciphersuites = $cipher;
+ $cipher = "";
+ }
+ ok(run(test([@ssltest, @exkeys, "-cipher", $cipher,
+ "-ciphersuites", $ciphersuites, $flag || ()])),
+ "Testing $cipher");
+ }
+ }
+ next if $protocol eq "-tls1_3";
is(run(test([@ssltest,
"-s_cipher", "EDH",
"-c_cipher", 'EDH:@SECLEVEL=1',
"-dhe512",
- $protocol eq "SSLv3" ? ("-ssl3") : ()])), 0,
+ $protocol])), 0,
"testing connection with weak DH, expecting failure");
- }
+ }
};
subtest 'RSA/(EC)DHE/PSK tests' => sub {
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 5
- if $no_tls1;
+ if $no_tls1 || $provider eq "fips";
SKIP: {
skip "skipping anonymous DH tests", 1
if ($no_dh);
- ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
+ ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time"])),
'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
}
skip "skipping RSA tests", 2
if $no_rsa;
- ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time", @extra])),
+ ok(run(test(["ssltest_old", "-provider", "default", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time"])),
'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
skip "skipping RSA+DHE tests", 1
if $no_dh;
- ok(run(test(["ssltest_old", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
+ ok(run(test(["ssltest_old", "-provider", "default", "-v", "-bio_pair", "-tls1", "-s_cert", srctop_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time"])),
'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
}
skip "skipping PSK tests", 2
if ($no_psk);
- ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
+ ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
'test tls1 with PSK');
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123"])),
'test tls1 with PSK via BIO pair');
}
}
};
- subtest 'Next Protocol Negotiation Tests' => sub {
- ######################################################################
-
- plan tests => 7;
-
- SKIP: {
- skip "TLSv1.0 is not supported by this OpenSSL build", 7
- if $no_tls1;
- skip "Next Protocol Negotiation is not supported by this OpenSSL build", 7
- if disabled("nextprotoneg");
-
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server_reject"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server_reject"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2", "-reuse"])));
- }
- };
-
subtest 'Custom Extension tests' => sub {
######################################################################
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 1
- if $no_tls1;
+ if $no_tls1 || $provider eq "fips";
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
'test tls1 with custom extensions');
SKIP: {
skip "TLSv1.0 is not supported by this OpenSSL build", 5
- if $no_tls1;
+ if $no_tls1 || $provider eq "fips";
note('echo test tls1 with serverinfo');
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
}
};
-
- subtest 'SNI tests' => sub {
-
- plan tests => 7;
-
- SKIP: {
- skip "TLSv1.x is not supported by this OpenSSL build", 7
- if $no_tls1 && $no_tls1_1 && $no_tls1_2;
-
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-sn_server1", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "foo", "-sn_expect1"])));
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "bar", "-sn_expect1"])));
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foo", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect1"])));
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "bar", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect2"])));
- # Negative test - make sure it doesn't crash, and doesn't switch contexts
- ok(run(test([@ssltest, "-bio_pair", "-sn_client", "foobar", "-sn_server1", "foo", "-sn_server2", "bar", "-sn_expect1"])));
- }
- };
-
- subtest 'ALPN tests' => sub {
- ######################################################################
-
- plan tests => 13;
-
- SKIP: {
- skip "TLSv1.0 is not supported by this OpenSSL build", 13
- if $no_tls1;
-
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_server", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "foo", "-alpn_expected", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo,bar", "-alpn_expected", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
-
- is(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "bar"])), 0,
- "Testing ALPN with protocol mismatch, expecting failure");
- is(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "baz", "-alpn_server", "bar,foo"])), 0,
- "Testing ALPN with protocol mismatch, expecting failure");
-
- # ALPN + SNI
- ok(run(test([@ssltest, "-bio_pair",
- "-alpn_client", "foo,bar", "-sn_client", "alice",
- "-alpn_server1", "foo,123", "-sn_server1", "alice",
- "-alpn_server2", "bar,456", "-sn_server2", "bob",
- "-alpn_expected", "foo"])));
- ok(run(test([@ssltest, "-bio_pair",
- "-alpn_client", "foo,bar", "-sn_client", "bob",
- "-alpn_server1", "foo,123", "-sn_server1", "alice",
- "-alpn_server2", "bar,456", "-sn_server2", "bob",
- "-alpn_expected", "bar"])));
- ok(run(test([@ssltest, "-bio_pair",
- "-alpn_client", "foo,bar", "-sn_client", "bob",
- "-alpn_server2", "bar,456", "-sn_server2", "bob",
- "-alpn_expected", "bar"])));
- }
- };
-
- subtest 'SRP tests' => sub {
-
- plan tests => 4;
-
- SKIP: {
- skip "skipping SRP tests", 4
- if $no_srp;
-
- ok(run(test([@ssltest, "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
- 'test tls1 with SRP');
-
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
- 'test tls1 with SRP via BIO pair');
-
- ok(run(test([@ssltest, "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
- 'test tls1 with SRP auth');
-
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
- 'test tls1 with SRP auth via BIO pair');
- }
- };
-
- subtest 'Multi-buffer tests' => sub {
- ######################################################################
-
- plan tests => 2;
-
- SKIP: {
- skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 2
- if $no_anytls;
-
- skip "skipping multi-buffer tests", 2
- if @extra || (POSIX::uname())[4] ne "x86_64";
-
- ok(run(test([@ssltest, "-cipher", "AES128-SHA", "-bytes", "8m"])));
-
- # We happen to know that AES128-SHA256 is TLSv1.2 only... for now.
- skip "TLSv1.2 is not supported by this OpenSSL configuration", 1
- if $no_tls1_2;
-
- ok(run(test([@ssltest, "-cipher", "AES128-SHA256", "-bytes", "8m"])));
- }
- };
-
- subtest 'DTLS Version min/max tests' => sub {
- my @protos;
- push(@protos, "dtls1") unless ($no_dtls1 || $no_dtls);
- push(@protos, "dtls1.2") unless ($no_dtls1_2 || $no_dtls);
- my @minprotos = (undef, @protos);
- my @maxprotos = (@protos, undef);
- my @shdprotos = (@protos, $protos[$#protos]);
- my $n = ((@protos+2) * (@protos+3))/2 - 2;
- my $ntests = $n * $n;
- plan tests => $ntests;
- SKIP: {
- skip "DTLS disabled", 1 if $ntests == 1;
-
- my $should;
- for (my $smin = 0; $smin < @minprotos; ++$smin) {
- for (my $smax = $smin ? $smin - 1 : 0; $smax < @maxprotos; ++$smax) {
- for (my $cmin = 0; $cmin < @minprotos; ++$cmin) {
- for (my $cmax = $cmin ? $cmin - 1 : 0; $cmax < @maxprotos; ++$cmax) {
- if ($cmax < $smin-1) {
- $should = "fail-server";
- } elsif ($smax < $cmin-1) {
- $should = "fail-client";
- } elsif ($cmax > $smax) {
- $should = $shdprotos[$smax];
- } else {
- $should = $shdprotos[$cmax];
- }
-
- my @args = (@ssltest, "-dtls");
- push(@args, "-should_negotiate", $should);
- push(@args, "-server_min_proto", $minprotos[$smin])
- if (defined($minprotos[$smin]));
- push(@args, "-server_max_proto", $maxprotos[$smax])
- if (defined($maxprotos[$smax]));
- push(@args, "-client_min_proto", $minprotos[$cmin])
- if (defined($minprotos[$cmin]));
- push(@args, "-client_max_proto", $maxprotos[$cmax])
- if (defined($maxprotos[$cmax]));
- my $ok = run(test[@args]);
- if (! $ok) {
- print STDERR "\nsmin=$smin, smax=$smax, cmin=$cmin, cmax=$cmax\n";
- print STDERR "\nFailed: @args\n";
- }
- ok($ok);
- }}}}}
- };
-
- subtest 'TLS session reuse' => sub {
- plan tests => 12;
-
- SKIP: {
- skip "TLS1.1 or TLS1.2 disabled", 12 if $no_tls1_1 || $no_tls1_2;
- ok(run(test([@ssltest, "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
- ok(run(test([@ssltest, "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.2"])));
- ok(run(test([@ssltest, "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.1"])));
-
- ok(run(test([@ssltest, "-server_max_proto", "tls1.1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
- ok(run(test([@ssltest, "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.1"])));
- ok(run(test([@ssltest, "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.2"])));
-
- ok(run(test([@ssltest, "-no_ticket", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
- ok(run(test([@ssltest, "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.2"])));
- ok(run(test([@ssltest, "-no_ticket", "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.1"])));
-
- ok(run(test([@ssltest, "-no_ticket", "-server_max_proto", "tls1.1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
- ok(run(test([@ssltest, "-no_ticket", "-server_max_proto", "tls1.1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "tls1.1"])));
- ok(run(test([@ssltest, "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "tls1.2"])));
- }
- };
-
- subtest 'DTLS session reuse' => sub {
- plan tests => 12;
- SKIP: {
- skip "DTLS disabled", 12 if $no_dtls;
-
- ok(run(test([@ssltest, "-dtls", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
- ok(run(test([@ssltest, "-dtls", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1.2"])));
- ok(run(test([@ssltest, "-dtls", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1"])));
-
- ok(run(test([@ssltest, "-dtls", "-server_max_proto", "dtls1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
- ok(run(test([@ssltest, "-dtls", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1"])));
- ok(run(test([@ssltest, "-dtls", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1.2"])));
-
- ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
- ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1.2"])));
- ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1"])));
-
- ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_max_proto", "dtls1", "-server_sess_out", $server_sess, "-client_sess_out", $client_sess])));
- ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_max_proto", "dtls1", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "1", "-should_negotiate", "dtls1"])));
- ok(run(test([@ssltest, "-dtls", "-no_ticket", "-server_sess_in", $server_sess, "-client_sess_in", $client_sess, "-should_reuse", "0", "-should_negotiate", "dtls1.2"])));
- }
- };
-
- subtest 'Certificate Transparency tests' => sub {
- ######################################################################
-
- plan tests => 3;
-
- SKIP: {
- skip "Certificate Transparency is not supported by this OpenSSL build", 3
- if $no_ct;
- skip "TLSv1.0 is not supported by this OpenSSL build", 3
- if $no_tls1;
-
- $ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
- my @ca = qw(-CAfile certCA.ss);
- ok(run(test([@ssltest, @ca, "-bio_pair", "-tls1", "-noct"])));
- # No SCTs provided, so this should fail.
- ok(run(test([@ssltest, @ca, "-bio_pair", "-tls1", "-ct",
- "-should_negotiate", "fail-client"])));
- # No SCTs provided, unverified chains still succeed.
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-ct"])));
- }
- };
-}
-
-sub testsslproxy {
- my $key = shift || srctop_file("apps","server.pem");
- my $cert = shift || srctop_file("apps","server.pem");
- my $CAtmp = shift;
- my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", bldtop_dir("certs"));
- my @extra = @_;
-
- my @ssltest = ("ssltest_old",
- "-s_key", $key, "-s_cert", $cert,
- "-c_key", $key, "-c_cert", $cert);
-
- # plan tests => 16;
-
- note('Testing a lot of proxy conditions.');
-
- # We happen to know that certP1.ss has policy letters "AB" and
- # certP2.ss has policy letters "BC". However, because certP2.ss
- # has certP1.ss as issuer, when it's used, both their policy
- # letters get combined into just "B".
- # The policy letter(s) then get filtered with the given auth letter
- # in the table below, and the result gets tested with the given
- # condition. For details, read ssltest_old.c
- #
- # certfilename => [ [ auth, cond, expected result ] ... ]
- my %expected = ( "certP1.ss" => [ [ [ 'A', 'A' ], 1 ],
- [ [ 'A', 'B' ], 0 ],
- [ [ 'A', 'C' ], 0 ],
- [ [ 'A', 'A|B&!C' ], 1 ],
- [ [ 'B', 'A' ], 0 ],
- [ [ 'B', 'B' ], 1 ],
- [ [ 'B', 'C' ], 0 ],
- [ [ 'B', 'A|B&!C' ], 1 ],
- [ [ 'C', 'A' ], 0 ],
- [ [ 'C', 'B' ], 0 ],
- [ [ 'C', 'C' ], 0 ],
- [ [ 'C', 'A|B&!C' ], 0 ],
- [ [ 'BC', 'A' ], 0 ],
- [ [ 'BC', 'B' ], 1 ],
- [ [ 'BC', 'C' ], 0 ],
- [ [ 'BC', 'A|B&!C' ], 1 ] ],
- "certP2.ss" => [ [ [ 'A', 'A' ], 0 ],
- [ [ 'A', 'B' ], 0 ],
- [ [ 'A', 'C' ], 0 ],
- [ [ 'A', 'A|B&!C' ], 0 ],
- [ [ 'B', 'A' ], 0 ],
- [ [ 'B', 'B' ], 1 ],
- [ [ 'B', 'C' ], 0 ],
- [ [ 'B', 'A|B&!C' ], 1 ],
- [ [ 'C', 'A' ], 0 ],
- [ [ 'C', 'B' ], 0 ],
- [ [ 'C', 'C' ], 0 ],
- [ [ 'C', 'A|B&!C' ], 0 ],
- [ [ 'BC', 'A' ], 0 ],
- [ [ 'BC', 'B' ], 1 ],
- [ [ 'BC', 'C' ], 0 ],
- [ [ 'BC', 'A|B&!C' ], 1 ] ] );
-
- SKIP: {
- skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", scalar(@{$expected{$cert}})
- if $no_anytls;
-
- foreach (@{$expected{$cert}}) {
- my $auth = $_->[0]->[0];
- my $cond = $_->[0]->[1];
- my $res = $_->[1];
- is(run(test([@ssltest, "-server_auth", @CA,
- "-proxy", "-proxy_auth", $auth,
- "-proxy_cond", $cond])), $res,
- "test tlsv1, server auth, proxy auth $auth and cond $cond (expect "
- .($res ? "success" : "failure").")");
- }
- }
}