-# SSL tests
+SSL tests
+=========
SSL testcases are configured in the `ssl-tests` directory.
-Each `ssl_*.conf.in` file contains a number of test configurations. These files
+Each `ssl_*.cnf.in` file contains a number of test configurations. These files
are used to generate testcases in the OpenSSL CONF format.
The precise test output can be dependent on the library configuration. The test
However, for verification, we also include checked-in configuration outputs
corresponding to the default configuration. These testcases live in
-`test/ssl-tests/*.conf` files.
+`test/ssl-tests/*.cnf` files.
-For more details, see `ssl-tests/01-simple.conf.in` for an example.
+For more details, see `ssl-tests/01-simple.cnf.in` for an example.
-## Configuring the test
+Configuring the test
+--------------------
First, give your test a name. The names do not have to be unique.
An example test input looks like this:
-```
{
name => "test-default",
server => { "CipherString" => "DEFAULT" },
client => { "CipherString" => "DEFAULT" },
test => { "ExpectedResult" => "Success" },
}
-```
The test section supports the following options
- Yes - a session ticket is expected
- No - a session ticket is not expected
+* SessionIdExpected - whether or not a session id is expected
+ - Ignore - do not check for a session id (default)
+ - Yes - a session id is expected
+ - No - a session id is not expected
+
* ResumptionExpected - whether or not resumption is expected (Resume mode only)
- Yes - resumed handshake
- No - full handshake (default)
* ExpectedServerSignType, ExpectedClientSignType - the expected
signature type used by server or client when signing messages
-## Configuring the client and server
+* ExpectedClientCANames - for client auth list of CA names the server must
+ send. If this is "empty" the list is expected to be empty otherwise it
+ is a file of certificates whose subject names form the list.
+
+* ExpectedServerCANames - list of CA names the client must send, TLS 1.3 only.
+ If this is "empty" the list is expected to be empty otherwise it is a file
+ of certificates whose subject names form the list.
+
+Configuring the client and server
+---------------------------------
The client and server configurations can be any valid `SSL_CTX`
configurations. For details, see the manpages for `SSL_CONF_cmd`.
Give your configurations as a dictionary of CONF commands, e.g.
-```
-server => {
- "CipherString" => "DEFAULT",
- "MinProtocol" => "TLSv1",
-}
-```
+ server => {
+ "CipherString" => "DEFAULT",
+ "MinProtocol" => "TLSv1",
+ }
The following sections may optionally be defined:
Additional handshake settings can be configured in the `extra` section of each
client and server:
-```
-client => {
- "CipherString" => "DEFAULT",
- extra => {
- "ServerName" => "server2",
+ client => {
+ "CipherString" => "DEFAULT",
+ extra => {
+ "ServerName" => "server2",
+ }
}
-}
-```
#### Supported client-side options
protocols can be specified as a comma-separated list, and a callback with the
recommended behaviour will be installed automatically.
+* SRPUser, SRPPassword - SRP settings. For client, this is the SRP user to
+ connect as; for server, this is a known SRP user.
+
### Default server and client configurations
The default server certificate and CA files are added to the configurations
You can override these options by redefining them:
-```
-client => {
- "VerifyCAFile" => "/path/to/custom/file"
-}
-```
+ client => {
+ "VerifyCAFile" => "/path/to/custom/file"
+ }
or by deleting them
-```
-client => {
- "VerifyCAFile" => undef
-}
-```
+ client => {
+ "VerifyCAFile" => undef
+ }
-## Adding a test to the test harness
+Adding a test to the test harness
+---------------------------------
1. Add a new test configuration to `test/ssl-tests`, following the examples of
- existing `*.conf.in` files (for example, `01-simple.conf.in`).
+ existing `*.cnf.in` files (for example, `01-simple.cnf.in`).
-2. Generate the generated `*.conf` test input file. You can do so by running
+2. Generate the generated `*.cnf` test input file. You can do so by running
`generate_ssl_tests.pl`:
-```
-$ ./config
-$ cd test
-$ TOP=.. perl -I testlib/ generate_ssl_tests.pl ssl-tests/my.conf.in \
- > ssl-tests/my.conf
-```
+ $ ./config
+ $ cd test
+ $ TOP=.. perl -I ../util/perl/ generate_ssl_tests.pl \
+ ssl-tests/my.cnf.in default > ssl-tests/my.cnf
-where `my.conf.in` is your test input file.
+where `my.cnf.in` is your test input file and `default` is the provider to use.
+For all the pre-generated test files you should use the default provider.
-For example, to generate the test cases in `ssl-tests/01-simple.conf.in`, do
+For example, to generate the test cases in `ssl-tests/01-simple.cnf.in`, do
-```
-$ TOP=.. perl -I testlib/ generate_ssl_tests.pl ssl-tests/01-simple.conf.in > ssl-tests/01-simple.conf
-```
+ $ TOP=.. perl -I ../util/perl/ generate_ssl_tests.pl \
+ ssl-tests/01-simple.cnf.in default > ssl-tests/01-simple.cnf
Alternatively (hackish but simple), you can comment out
-```
-unlink glob $tmp_file;
-```
+ unlink glob $tmp_file;
in `test/recipes/80-test_ssl_new.t` and run
-```
-$ make TESTS=test_ssl_new test
-```
+ $ make TESTS=test_ssl_new test
This will save the generated output in a `*.tmp` file in the build directory.
the test suite has any skip conditions, update those too (see
`test/recipes/80-test_ssl_new.t` for details).
-## Running the tests with the test harness
+Running the tests with the test harness
+---------------------------------------
-```
-HARNESS_VERBOSE=yes make TESTS=test_ssl_new test
-```
+ HARNESS_VERBOSE=yes make TESTS=test_ssl_new test
-## Running a test manually
+Running a test manually
+-----------------------
These steps are only needed during development. End users should run `make test`
or follow the instructions above to run the SSL test suite.
environment variable to point to the location of the certs. E.g., from the root
OpenSSL directory, do
-```
-$ CTLOG_FILE=test/ct/log_list.conf TEST_CERTS_DIR=test/certs test/ssl_test \
- test/ssl-tests/01-simple.conf
-```
+ $ CTLOG_FILE=test/ct/log_list.cnf TEST_CERTS_DIR=test/certs test/ssl_test \
+ test/ssl-tests/01-simple.cnf
or for shared builds
-```
-$ CTLOG_FILE=test/ct/log_list.conf TEST_CERTS_DIR=test/certs \
- util/shlib_wrap.sh test/ssl_test test/ssl-tests/01-simple.conf
-```
+ $ CTLOG_FILE=test/ct/log_list.cnf TEST_CERTS_DIR=test/certs \
+ util/wrap.pl test/ssl_test test/ssl-tests/01-simple.cnf
Note that the test expectations sometimes depend on the Configure settings. For
example, the negotiated protocol depends on the set of available (enabled)
just run `make test` do not need any extra steps.
However, when running a test manually, keep in mind that the repository version
-of the generated `test/ssl-tests/*.conf` correspond to expected outputs in with
+of the generated `test/ssl-tests/*.cnf` correspond to expected outputs in with
the default Configure options. To run `ssl_test` manually from the command line
in a build with a different configuration, you may need to generate the right
-`*.conf` file from the `*.conf.in` input first.
+`*.cnf` file from the `*.cnf.in` input first.