#define RSMBLY_BITMASK_MARK(bitmask, start, end) { \
if ((end) - (start) <= 8) { \
- int ii; \
+ long ii; \
for (ii = (start); ii < (end); ii++) bitmask[((ii) >> 3)] |= (1 << ((ii) & 7)); \
} else { \
- int ii; \
+ long ii; \
bitmask[((start) >> 3)] |= bitmask_start_values[((start) & 7)]; \
- for (ii = (((start) >> 3) + 1); ii < ((end) >> 3); ii++) bitmask[ii] = 0xff; \
- bitmask[((end) >> 3)] |= bitmask_end_values[((end) & 7)]; \
+ for (ii = (((start) >> 3) + 1); ii < ((((end) - 1)) >> 3); ii++) bitmask[ii] = 0xff; \
+ bitmask[(((end) - 1) >> 3)] |= bitmask_end_values[((end) & 7)]; \
} }
#define RSMBLY_BITMASK_IS_COMPLETE(bitmask, msg_len, is_complete) { \
- int ii; \
+ long ii; \
+ OPENSSL_assert((msg_len) > 0); \
is_complete = 1; \
- if (bitmask[((msg_len) >> 3)] != bitmask_end_values[((msg_len) & 7)]) is_complete = 0; \
- if (is_complete) for (ii = 0; ii < ((msg_len) >> 3); ii++) \
- if (bitmask[ii] != 0xff) { is_complete = 0; break; } }
+ if (bitmask[(((msg_len) - 1) >> 3)] != bitmask_end_values[((msg_len) & 7)]) is_complete = 0; \
+ if (is_complete) for (ii = (((msg_len) - 1) >> 3) - 1; ii >= 0 ; ii--) \
+ if (bitmask[ii] != 0xff) { is_complete = 0; break; } }
#if 0
#define RSMBLY_BITMASK_PRINT(bitmask, msg_len) { \
- int ii; \
+ long ii; \
printf("bitmask: "); for (ii = 0; ii < (msg_len); ii++) \
printf("%d ", (bitmask[ii >> 3] & (1 << (ii & 7))) >> (ii & 7)); \
printf("\n"); }
#endif
static unsigned char bitmask_start_values[] = {0xff, 0xfe, 0xfc, 0xf8, 0xf0, 0xe0, 0xc0, 0x80};
-static unsigned char bitmask_end_values[] = {0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f};
+static unsigned char bitmask_end_values[] = {0xff, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f};
/* XDTLS: figure out the right values */
static unsigned int g_probable_mtu[] = {1500 - 28, 512 - 28, 256 - 28};
-static unsigned int dtls1_min_mtu(void);
static unsigned int dtls1_guess_mtu(unsigned int curr_mtu);
static void dtls1_fix_message_header(SSL *s, unsigned long frag_off,
unsigned long frag_len);
return ret;
mtu = s->d1->mtu - (DTLS1_HM_HEADER_LENGTH + DTLS1_RT_HEADER_LENGTH);
}
-
- OPENSSL_assert(mtu > 0); /* should have something reasonable now */
-
#endif
+ OPENSSL_assert(s->d1->mtu >= dtls1_min_mtu()); /* should have something reasonable now */
+
if ( s->init_off == 0 && type == SSL3_RT_HANDSHAKE)
OPENSSL_assert(s->init_num ==
(int)s->d1->w_msg_hdr.msg_len + DTLS1_HM_HEADER_LENGTH);
memset(msg_hdr, 0x00, sizeof(struct hm_header_st));
- s->d1->handshake_read_seq++;
- /* we just read a handshake message from the other side:
- * this means that we don't need to retransmit of the
- * buffered messages.
- * XDTLS: may be able clear out this
- * buffer a little sooner (i.e if an out-of-order
- * handshake message/record is received at the record
- * layer.
- * XDTLS: exception is that the server needs to
- * know that change cipher spec and finished messages
- * have been received by the client before clearing this
- * buffer. this can simply be done by waiting for the
- * first data segment, but is there a better way? */
- dtls1_clear_record_buffer(s);
+ /* Don't change sequence numbers while listening */
+ if (!s->d1->listen)
+ s->d1->handshake_read_seq++;
s->init_msg = s->init_buf->data + DTLS1_HM_HEADER_LENGTH;
return s->init_num;
if (i<=0 || (unsigned long)i!=frag_len)
goto err;
- RSMBLY_BITMASK_MARK(frag->reassembly, msg_hdr->frag_off,
- msg_hdr->frag_off + frag_len);
+ RSMBLY_BITMASK_MARK(frag->reassembly, (long)msg_hdr->frag_off,
+ (long)(msg_hdr->frag_off + frag_len));
- RSMBLY_BITMASK_IS_COMPLETE(frag->reassembly, msg_hdr->msg_len,
- is_complete)
+ RSMBLY_BITMASK_IS_COMPLETE(frag->reassembly, (long)msg_hdr->msg_len,
+ is_complete);
if (is_complete)
{
*ok = 0;
return i;
}
- OPENSSL_assert(i == DTLS1_HM_HEADER_LENGTH);
+ /* Handshake fails if message header is incomplete */
+ if (i != DTLS1_HM_HEADER_LENGTH)
+ {
+ al=SSL_AD_UNEXPECTED_MESSAGE;
+ SSLerr(SSL_F_DTLS1_GET_MESSAGE_FRAGMENT,SSL_R_UNEXPECTED_MESSAGE);
+ goto f_err;
+ }
/* parse the message fragment header */
dtls1_get_message_header(wire, &msg_hdr);
/*
* if this is a future (or stale) message it gets buffered
- * (or dropped)--no further processing at this time
+ * (or dropped)--no further processing at this time
+ * While listening, we accept seq 1 (ClientHello with cookie)
+ * although we're still expecting seq 0 (ClientHello)
*/
- if ( msg_hdr.seq != s->d1->handshake_read_seq)
+ if (msg_hdr.seq != s->d1->handshake_read_seq && !(s->d1->listen && msg_hdr.seq == 1))
return dtls1_process_out_of_seq_message(s, &msg_hdr, ok);
len = msg_hdr.msg_len;
/* XDTLS: an incorrectly formatted fragment should cause the
* handshake to fail */
- OPENSSL_assert(i == (int)frag_len);
+ if (i != (int)frag_len)
+ {
+ al=SSL3_AD_ILLEGAL_PARAMETER;
+ SSLerr(SSL_F_DTLS1_GET_MESSAGE_FRAGMENT,SSL3_AD_ILLEGAL_PARAMETER);
+ goto f_err;
+ }
*ok = 1;
dtls1_set_message_header(SSL *s, unsigned char *p, unsigned char mt,
unsigned long len, unsigned long frag_off, unsigned long frag_len)
{
- if ( frag_off == 0)
+ /* Don't change sequence numbers while listening */
+ if (frag_off == 0 && !s->d1->listen)
{
s->d1->handshake_write_seq = s->d1->next_handshake_write_seq;
s->d1->next_handshake_write_seq++;
return p;
}
-static unsigned int
+unsigned int
dtls1_min_mtu(void)
{
return (g_probable_mtu[(sizeof(g_probable_mtu) /
ccs_hdr->type = *(data++);
}
+
+int dtls1_shutdown(SSL *s)
+ {
+ int ret;
+#ifndef OPENSSL_NO_SCTP
+ if (BIO_dgram_is_sctp(SSL_get_wbio(s)) &&
+ !(s->shutdown & SSL_SENT_SHUTDOWN))
+ {
+ ret = BIO_dgram_sctp_wait_for_dry(SSL_get_wbio(s));
+ if (ret < 0) return -1;
+
+ if (ret == 0)
+ BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_SAVE_SHUTDOWN, 1, NULL);
+ }
+#endif
+ ret = ssl3_shutdown(s);
+#ifndef OPENSSL_NO_SCTP
+ BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_SAVE_SHUTDOWN, 0, NULL);
+#endif
+ return ret;
+ }