B<openssl> B<s_client>
[B<-help>]
+[B<-ssl_config> I<section>]
[B<-connect> I<host:port>]
+[B<-host> I<hostname>]
+[B<-port> I<port>]
[B<-bind> I<host:port>]
[B<-proxy> I<host:port>]
[B<-proxy_user> I<userid>]
[B<-noservername>]
[B<-verify> I<depth>]
[B<-verify_return_error>]
+[B<-verify_quiet>]
+[B<-verifyCAfile> I<filename>]
+[B<-verifyCApath> I<dir>]
+[B<-verifyCAstore> I<uri>]
[B<-cert> I<filename>]
[B<-certform> B<DER>|B<PEM>]
-[B<-CRLform> B<DER>|B<PEM>]
-[B<-key> I<filename>]
-[B<-keyform> B<DER>|B<PEM>]
[B<-cert_chain> I<filename>]
[B<-build_chain>]
+[B<-CRL> I<filename>]
+[B<-CRLform> B<DER>|B<PEM>]
+[B<-crl_download>]
+[B<-key> I<filename>]
+[B<-keyform> B<DER>|B<PEM>|B<ENGINE>]
[B<-pass> I<arg>]
-[B<-chainCApath> I<directory>]
[B<-chainCAfile> I<filename>]
+[B<-chainCApath> I<directory>]
[B<-chainCAstore> I<uri>]
[B<-requestCAfile> I<filename>]
[B<-dane_tlsa_domain> I<domain>]
[B<-dane_tlsa_rrdata> I<rrdata>]
[B<-dane_ee_no_namechecks>]
-[B<-attime> I<timestamp>]
-[B<-check_ss_sig>]
-[B<-crl_check>]
-[B<-crl_check_all>]
-[B<-explicit_policy>]
-[B<-extended_crl>]
-[B<-ignore_critical>]
-[B<-inhibit_any>]
-[B<-inhibit_map>]
-[B<-no_check_time>]
-[B<-partial_chain>]
-[B<-policy> I<arg>]
-[B<-policy_check>]
-[B<-policy_print>]
-[B<-purpose> I<purpose>]
-[B<-suiteB_128>]
-[B<-suiteB_128_only>]
-[B<-suiteB_192>]
-[B<-trusted_first>]
-[B<-no_alt_chains>]
-[B<-use_deltas>]
-[B<-auth_level> I<num>]
-[B<-verify_depth> I<num>]
-[B<-verify_email> I<email>]
-[B<-verify_hostname> I<hostname>]
-[B<-verify_ip> I<ip>]
-[B<-verify_name> I<name>]
-[B<-build_chain>]
-[B<-x509_strict>]
[B<-reconnect>]
[B<-showcerts>]
+[B<-prexit>]
[B<-debug>]
+[B<-trace>]
+[B<-nocommands>]
+[B<-security_debug>]
+[B<-security_debug_verbose>]
[B<-msg>]
+[B<-timeout>]
+[B<-mtu> I<size>]
+[B<-keymatexport> I<label>]
+[B<-keymatexportlen> I<len>]
+[B<-msgfile> I<filename>]
[B<-nbio_test>]
[B<-state>]
[B<-nbio>]
[B<-psk> I<key>]
[B<-psk_session> I<file>]
[B<-quiet>]
-[B<-ssl3>]
-[B<-tls1>]
-[B<-tls1_1>]
-[B<-tls1_2>]
-[B<-tls1_3>]
-[B<-no_ssl3>]
-[B<-no_tls1>]
-[B<-no_tls1_1>]
-[B<-no_tls1_2>]
-[B<-no_tls1_3>]
-[B<-dtls>]
-[B<-dtls1>]
-[B<-dtls1_2>]
[B<-sctp>]
[B<-sctp_label_bug>]
[B<-fallback_scsv>]
[B<-async>]
+[B<-maxfraglen> I<len>]
[B<-max_send_frag>]
[B<-split_send_frag>]
[B<-max_pipelines>]
[B<-bugs>]
[B<-comp>]
[B<-no_comp>]
+[B<-brief>]
[B<-allow_no_dhe_kex>]
[B<-sigalgs> I<sigalglist>]
[B<-curves> I<curvelist>]
[B<-ciphersuites> I<val>]
[B<-serverpref>]
[B<-starttls> I<protocol>]
+[B<-name> I<hostname>]
[B<-xmpphost> I<hostname>]
[B<-name> I<hostname>]
[B<-tlsextdebug>]
[B<-no_ticket>]
[B<-sess_out> I<filename>]
+[B<-serverinfo> I<types>]
[B<-sess_in> I<filename>]
[B<-serverinfo> I<types>]
[B<-status>]
[B<-keylogfile> I<file>]
[B<-early_data> I<file>]
[B<-enable_pha>]
+[B<-use_srtp> I<value>]
+[B<-srpuser> I<value>]
+[B<-srppass> I<value>]
+[B<-srp_lateuser>]
+[B<-srp_moregroups>]
+[B<-srp_strength> I<number>]
{- $OpenSSL::safe::opt_name_synopsis -}
+{- $OpenSSL::safe::opt_version_synopsis -}
{- $OpenSSL::safe::opt_x_synopsis -}
{- $OpenSSL::safe::opt_trust_synopsis -}
+{- $OpenSSL::safe::opt_s_synopsis -}
{- $OpenSSL::safe::opt_r_synopsis -}
+{- $OpenSSL::safe::opt_provider_synopsis -}
{- $OpenSSL::safe::opt_engine_synopsis -}
+[B<-ssl_client_engine> I<id>]
+{- $OpenSSL::safe::opt_v_synopsis -}
[I<host>:I<port>]
=for openssl ifdef engine ssl_client_engine ct noct ctlogfile
Print out a usage message.
+=item B<-ssl_config> I<section>
+
+Use the specified section of the configuration file to configure the B<SSL_CTX> object.
+
=item B<-connect> I<host>:I<port>
This specifies the host and optional port to connect to. It is possible to
If neither this nor the target positional argument are specified then an attempt
is made to connect to the local host on port 4433.
+=item B<-host> I<hostname>
+
+Host to connect to; use B<-connect> instead.
+
+=item B<-port> I<port>
+
+Connect to the specified port; use B<-connect> instead.
+
=item B<-bind> I<host:port>
This specifies the host address and or port to bind as the source for the
=item B<-cert> I<certname>
-The certificate to use, if one is requested by the server. The default is
-not to use a certificate.
+The client certificate to use, if one is requested by the server.
+The default is not to use a certificate.
-=item B<-certform> I<format>
+The chain for the client certificate may be specified using B<-cert_chain>.
-The certificate format to use: DER or PEM. PEM is the default.
+=item B<-certform> B<DER>|B<PEM>
-=item B<-CRLform> B<DER>|B<PEM>
+The client certificate file format to use; the default is B<PEM>.
+see L<openssl(1)/Format Options>.
-The CRL format; the default is B<PEM>.
-See L<openssl(1)/Format Options> for details.
+=item B<-cert_chain>
-=item B<-key> I<keyfile>
+A file containing untrusted certificates to use when attempting to build the
+certificate chain related to the certificate specified via the B<-cert> option.
+
+=item B<-build_chain>
-The private key to use. If not specified then the certificate file will
-be used.
+Specify whether the application should build the client certificate chain to be
+provided to the server.
-=item B<-keyform> I<format>
+=item B<-CRL> I<filename>
-The key format; the default is B<PEM>.
+CRL file to use to check the server's certificate.
+
+=item B<-CRLform> B<DER>|B<PEM>
+
+The CRL file format; the default is B<PEM>.
See L<openssl(1)/Format Options> for details.
-=item B<-cert_chain>
+=item B<-crl_download>
-A file containing trusted certificates to use when attempting to build the
-client/server certificate chain related to the certificate specified via the
-B<-cert> option.
+Download CRL from distribution points in the certificate.
-=item B<-build_chain>
+=item B<-key> I<keyfile>
-Specify whether the application should build the certificate chain to be
-provided to the server.
+The client private key file to use.
+If not specified then the certificate file will be used to read also the key.
+
+=item B<-keyform> B<DER>|B<PEM>|B<ENGINE>
+
+The key format; the default is B<PEM>.
+See L<openssl(1)/Format Options> for details.
=item B<-pass> I<arg>
Return verification errors instead of continuing. This will typically
abort the handshake with a fatal error.
-=item B<-chainCApath> I<directory>
+=item B<-verify_quiet>
+
+Limit verify output to only errors.
-The directory to use for building the chain provided to the server. This
-directory must be in "hash format", see L<openssl-verify(1)> for more
-information.
+=item B<-verifyCAfile> I<filename>
+
+A file in PEM format containing trusted certificates to use
+for verifying the server's certificate.
+
+=item B<-verifyCApath> I<dir>
+
+A directory containing trusted certificates to use
+for verifying the server's certificate.
+This directory must be in "hash format",
+see L<openssl-verify(1)> for more information.
+
+=item B<-verifyCAstore> I<uri>
+
+The URI of a store containing trusted certificates to use
+for verifying the server's certificate.
=item B<-chainCAfile> I<file>
-A file containing trusted certificates to use when attempting to build the
-client certificate chain.
+A file in PEM format containing trusted certificates to use
+when attempting to build the client certificate chain.
+
+=item B<-chainCApath> I<directory>
+
+A directory containing trusted certificates to use
+for building the client certificate chain provided to the server.
+This directory must be in "hash format",
+see L<openssl-verify(1)> for more information.
=item B<-chainCAstore> I<uri>
-The URI to use when attempting to build the client certificate chain.
+The URI of a store containing trusted certificates to use
+when attempting to build the client certificate chain.
+The URI may indicate a single certificate, as well as a collection of them.
+With URIs in the C<file:> scheme, this acts as B<-chainCAfile> or
+B<-chainCApath>, depending on if the URI indicates a directory or a
+single file.
+See L<ossl_store-file(7)> for more information on the C<file:> scheme.
=item B<-requestCAfile> I<file>
Use one or more times to specify the RRDATA fields of the DANE TLSA
RRset associated with the target service. The I<rrdata> value is
-specied in "presentation form", that is four whitespace separated
+specified in "presentation form", that is four whitespace separated
fields that specify the usage, selector, matching type and associated
data, with the last of these encoded in hexadecimal. Optional
whitespace is ignored in the associated data field. For example:
connections to any server of its choice, and in any case SMTP and XMPP clients
do not execute scripts downloaded from remote servers.
-=item B<-attime>, B<-check_ss_sig>, B<-crl_check>, B<-crl_check_all>,
-B<-explicit_policy>, B<-extended_crl>, B<-ignore_critical>, B<-inhibit_any>,
-B<-inhibit_map>, B<-no_alt_chains>, B<-no_check_time>, B<-partial_chain>, B<-policy>,
-B<-policy_check>, B<-policy_print>, B<-purpose>, B<-suiteB_128>,
-B<-suiteB_128_only>, B<-suiteB_192>, B<-trusted_first>, B<-use_deltas>,
-B<-auth_level>, B<-verify_depth>, B<-verify_email>, B<-verify_hostname>,
-B<-verify_ip>, B<-verify_name>, B<-x509_strict>
-
-Set various certificate chain validation options. See the
-L<openssl-verify(1)> manual page for details.
-
=item B<-reconnect>
Reconnects to the same server 5 times using the same session ID, this can
Print extensive debugging information including a hex dump of all traffic.
+=item B<-nocommands>
+
+Do not use interactive command letters.
+
+=item B<-security_debug>
+
+Enable security debug messages.
+
+=item B<-security_debug_verbose>
+
+Output more security debug output.
+
=item B<-msg>
+Show protocol messages.
+
+=item B<-timeout>
+
+Enable send/receive timeout on DTLS connections.
+
+=item B<-mtu> I<size>
+
+Set MTU of the link layer to the specified size.
+
+=item B<-keymatexport> I<label>
+
+Export keying material using the specified label.
+
+=item B<-keymatexportlen> I<len>
+
+Export the specified number of bytes of keying material; default is 20.
+
Show all protocol messages with hex dump.
=item B<-trace>
Show verbose trace output of protocol messages. OpenSSL needs to be compiled
with B<enable-ssl-trace> for this option to work.
-=item B<-msgfile>
+=item B<-msgfile> I<filename>
File to send output of B<-msg> or B<-trace> to, default standard output.
Use the pem encoded SSL_SESSION data stored in I<file> as the basis of a PSK.
Note that this will only work if TLSv1.3 is negotiated.
-=item B<-ssl3>, B<-tls1>, B<-tls1_1>, B<-tls1_2>, B<-tls1_3>, B<-no_ssl3>, B<-no_tls1>, B<-no_tls1_1>, B<-no_tls1_2>, B<-no_tls1_3>
-
-These options require or disable the use of the specified SSL or TLS protocols.
-By default, this command will negotiate the highest mutually supported protocol
-version.
-When a specific TLS version is required, only that version will be offered to
-and accepted from the server.
-Note that not all protocols and flags may be available, depending on how
-OpenSSL was built.
-
-=item B<-dtls>, B<-dtls1>, B<-dtls1_2>
-
-These options make this command use DTLS protocols instead of TLS.
-With B<-dtls>, it will negotiate any supported DTLS protocol version,
-whilst B<-dtls1> and B<-dtls1_2> will only support DTLS1.0 and DTLS1.2
-respectively.
-
=item B<-sctp>
Use SCTP for the transport protocol instead of UDP in DTLS. Must be used in
is also used via the B<-engine> option. For test purposes the dummy async engine
(dasync) can be used (if available).
+=item B<-maxfraglen> I<len>
+
+Enable Maximum Fragment Length Negotiation; allowed values are
+C<512>, C<1024>, C<2048>, and C<4096>.
+
=item B<-max_send_frag> I<int>
The maximum size of data fragment to send.
For TLSv1.3 only, send the Post-Handshake Authentication extension. This will
happen whether or not a certificate has been provided via B<-cert>.
-=item I<host>:I<port>
+=item B<-use_srtp> I<value>
-Rather than providing B<-connect>, the target hostname and optional port may
-be provided as a single positional argument after all options. If neither this
-nor B<-connect> are provided, falls back to attempting to connect to
-I<localhost> on port I<4433>.
+Offer SRTP key management, where B<value> is a colon-separated profile list.
+
+=item B<-srpuser> I<value>
+
+Set the SRP username to the specified value.
+
+=item B<-srppass> I<value>
+
+Set the SRP password to the specified value.
+
+=item B<-srp_lateuser>
+
+SRP username for the second ClientHello message.
+
+=item B<-srp_moregroups>
+
+Tolerate other than the known B<g> and B<N> values.
+
+=item B<-srp_strength> I<number>
+
+Set the minimal acceptable length, in bits, for B<N>.
+
+{- $OpenSSL::safe::opt_version_item -}
{- $OpenSSL::safe::opt_name_item -}
{- $OpenSSL::safe::opt_trust_item -}
+{- $OpenSSL::safe::opt_s_item -}
+
{- $OpenSSL::safe::opt_r_item -}
+{- $OpenSSL::safe::opt_provider_item -}
+
{- $OpenSSL::safe::opt_engine_item -}
+=item B<-ssl_client_engine> I<id>
+
+Specify engine to be used for client certificate operations.
+
+{- $OpenSSL::safe::opt_v_item -}
+
+Verification errors are displayed, for debugging, but the command will
+proceed unless the B<-verify_return_error> option is used.
+
+=item I<host>:I<port>
+
+Rather than providing B<-connect>, the target hostname and optional port may
+be provided as a single positional argument after all options. If neither this
+nor B<-connect> are provided, falls back to attempting to connect to
+I<localhost> on port I<4433>.
+
=back
=head1 CONNECTED COMMANDS
projects / openssl.git / blobdiff