HP-UX:*)
HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
case "$HPUXVER" in
+ 11.*)
+ echo "${MACHINE}-hp-hpux11"; exit 0
+ ;;
10.*)
- echo "${MACHINE}-hp-hpux10."; exit 0
+ echo "${MACHINE}-hp-hpux10"; exit 0
;;
*)
echo "${MACHINE}-hp-hpux"; exit 0
esac
;;
- IRIX:*)
- echo "${MACHINE}-sgi-irix"; exit 0
+ IRIX:5.*)
+ echo "mips2-sgi-irix"; exit 0
+ ;;
+
+ IRIX:6.*)
+ echo "mips3-sgi-irix"; exit 0
;;
IRIX64:*)
- echo "${MACHINE}-sgi-irix64"; exit 0
+ echo "mips4-sgi-irix64"; exit 0
;;
Linux:[2-9].*)
echo "${MACHINE}-lynx-lynxos"; exit 0
;;
+ BSD/OS:4.*) # BSD/OS always says 386
+ echo "i486-whatever-bsdi4"; exit 0
+ ;;
+
BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*)
- echo "i486-whatever-bsdi"; exit 0
+ case `/sbin/sysctl -n hw.model` in
+ Pentium*)
+ echo "i586-whatever-bsdi"; exit 0
+ ;;
+ *)
+ echo "i386-whatever-bsdi"; exit 0
+ ;;
+ esac;
;;
BSD/386:*|BSD/OS:*)
echo "${MACHINE}-whatever-bsdi"; exit 0
;;
- FreeBSD:3*:*:*)
- echo "${MACHINE}-whatever-freebsd3"; exit 0
- ;;
-
FreeBSD:*:*:*386*)
case `sysctl -n hw.model` in
Pentium*)
echo "${MACHINE}-unknown-ultrix"; exit 0
;;
- SINIX*)
- echo "${MACHINE}-sni-sysv4"; exit 0
+ SINIX*|ReliantUNIX*)
+ echo "${MACHINE}-siemens-sysv4"; exit 0
+ ;;
+
+ POSIX-BC*)
+ echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
;;
machten:*)
# Now NeXT
ISNEXT=`hostinfo 2>/dev/null`
case "$ISNEXT" in
+ *'NeXT Mach 3.3'*)
+ echo "whatever-next-nextstep3.3"; exit 0
+ ;;
*NeXT*)
echo "whatever-next-nextstep"; exit 0
;;
# At this point we gone through all the one's
# we know of: Punt
-echo "${MACHINE}-whatever-${SYSTEM}|${RELEASE}|${VERSION}"
+echo "${MACHINE}-whatever-${SYSTEM}"
exit 0
) 2>/dev/null | (
PREFIX=""
SUFFIX=""
-VERBOSE="false"
TEST="false"
# pick up any command line args to config
do
case "$i" in
-d*) PREFIX="debug-";;
--v*) VERBOSE="true";;
-t*) TEST="true";;
-h*) TEST="true"; cat <<EOF
Usage: config [options]
-d Add a debug- prefix to machine choice.
- -v Verbose mode.
-t Test mode, do not run the Configure perl script.
-h This help.
# figure out if gcc is available and if so we use it otherwise
# we fallback to whatever cc does on the system
-GCCVER=`(gcc -v) 2>&1`
-if [ $? = "0" ]; then
+GCCVER=`(gcc --version) 2>/dev/null`
+if [ "$GCCVER" != "" ]; then
CC=gcc
+ # then strip off whatever prefix Cygnus prepends the number with...
+ GCCVER=`echo $GCCVER | sed 's/^[a-z]*\-//'`
+ # peak single digit before and after first dot, e.g. 2.95.1 gives 29
+ GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
else
CC=cc
fi
+if [ "$SYSTEM" = "SunOS" ]; then
+ # assume output is "blah-blah C x.x"
+ CCVER=`(cc -V 2>&1) 2>/dev/null | \
+ egrep -e '^cc: .* C [0-9]\.[0-9]' | \
+ sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
+ CCVER=${CCVER:-0}
+ if [ $CCVER -gt 40 ]; then
+ CC=cc # overrides gcc!!!
+ if [ $CCVER -eq 50 ]; then
+ echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
+ echo " patch #107357-01 or later applied."
+ sleep 5
+ fi
+ elif [ "$CC" = "cc" -a $CCVER -gt 0 ]; then
+ CC=sc3
+ fi
+fi
+
+GCCVER=${GCCVER:-0}
+CCVER=${CCVER:-0}
+
# read the output of the embedded GuessOS
read GUESSOS
-if [ "$VERBOSE" = "true" ]; then
- echo GUESSOS $GUESSOS
-fi
+echo Operating system: $GUESSOS
# now map the output into SSLeay terms ... really should hack into the
# script above so we end up with values in vars but that would take
case "$GUESSOS" in
alpha-*-linux2) OUT="alpha-gcc" ;;
ppc-*-linux2) OUT="linux-ppc" ;;
+ mips-*-linux?) OUT="linux-mips" ;;
+ mips2-sgi-irix)
+ CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+ CPU=${CPU:-0}
+ if [ $CPU -ge 4000 ]; then
+ options="$options -mips2"
+ fi
+ OUT="irix-$CC"
+ ;;
+ mips3-sgi-irix)
+ CPU=`(hinv -t cpu) 2>/dev/null | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
+ CPU=${CPU:-0}
+ if [ $CPU -ge 5000 ]; then
+ options="$options -mips4"
+ else
+ options="$options -mips3"
+ fi
+ OUT="irix-mips3-$CC"
+ ;;
+ mips4-sgi-irix64)
+ echo "WARNING! If you wish to build 64-bit library, then you have to"
+ echo " invoke './Configre irix64-mips4-$CC' *manually*."
+ echo " Type Ctrl-C if you don't want to continue."
+ read waste < /dev/tty
+ options="$options -mips4"
+ OUT="irix-mips3-$CC"
+ ;;
+ sparc64-*-linux2)
+ #Before we can uncomment following lines we have to wait at least
+ #till 64-bit glibc for SPARC is operational:-(
+ #echo "WARNING! If you wish to build 64-bit library, then you have to"
+ #echo " invoke './Configure linux64-sparcv9' *manually*."
+ #echo " Type Ctrl-C if you don't want to continue."
+ #read waste < /dev/tty
+ OUT="linux-sparcv9" ;;
+ sparc-*-linux2)
+ KARCH=`awk '/type/{print$3}' /proc/cpuinfo`
+ case ${KARCH:-sun4} in
+ sun4u*) OUT="linux-sparcv9" ;;
+ sun4m) OUT="linux-sparcv8" ;;
+ sun4d) OUT="linux-sparcv8" ;;
+ *) OUT="linux-sparcv7" ;;
+ esac ;;
*-*-linux2) OUT="linux-elf" ;;
*-*-linux1) OUT="linux-aout" ;;
- sun4*-sun-solaris2) OUT="solaris-sparc-$CC" ;;
+ sun4u*-sun-solaris2)
+ ISA64=`(isalist) 2>/dev/null | grep sparcv9`
+ if [ "$ISA64" != "" -a "$CC" = "cc" -a $CCVER -ge 50 ]; then
+ echo "WARNING! If you wish to build 64-bit library, then you have to"
+ echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
+ echo " Type Ctrl-C if you don't want to continue."
+ read waste < /dev/tty
+ fi
+ OUT="solaris-sparcv9-$CC" ;;
+ sun4m-sun-solaris2) OUT="solaris-sparcv8-$CC" ;;
+ sun4d-sun-solaris2) OUT="solaris-sparcv8-$CC" ;;
+ sun4*-sun-solaris2) OUT="solaris-sparcv7-$CC" ;;
*86*-sun-solaris2) OUT="solaris-x86-$CC" ;;
*-*-sunos4) OUT="sunos-$CC" ;;
- *-freebsd3) OUT="FreeBSD-elf" ;;
+ alpha*-*-freebsd) OUT="FreeBSD-alpha" ;;
*-freebsd) OUT="FreeBSD" ;;
*86*-*-netbsd) OUT="NetBSD-x86" ;;
sun3*-*-netbsd) OUT="NetBSD-m68" ;;
alpha*-*-openbsd) OUT="OpenBSD-alpha" ;;
pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
*-*-openbsd) OUT="OpenBSD" ;;
+ *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
*-*-osf) OUT="alpha-cc" ;;
*-*-unixware*) OUT="unixware-2.0" ;;
- *-sni-sysv4) OUT="SINIX" ;;
- *-hpux*) OUT="hpux-$CC" ;;
+ BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
+ RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
+ *-siemens-sysv4) OUT="SINIX" ;;
# these are all covered by the catchall below
+ # *-hpux*) OUT="hpux-$CC" ;;
# *-aix) OUT="aix-$CC" ;;
# *-dgux) OUT="dgux" ;;
*) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
esac
+# gcc < 2.8 does not support -mcpu=ultrasparc
+if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
+then
+ echo "WARNING! Do consider upgrading to gcc-2.8 or later."
+ sleep 5
+ OUT=solaris-sparcv9-gcc27
+fi
+if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
+then
+ echo "WARNING! Falling down to 'linux-sparcv8'."
+ echo " Upgrade to gcc-2.8 or later."
+ sleep 5
+ OUT=linux-sparcv8
+fi
+
case "$GUESSOS" in
i386-*) options="$options 386" ;;
esac
+for i in bf cast des dh dsa hmac md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha
+do
+ if [ ! -d crypto/$i ]
+ then
+ options="$options no-$i"
+ fi
+done
+
if [ -z "$OUT" ]; then
OUT="$CC"
fi
OUT="$PREFIX$OUT"
-# at this point we have the answer ... which we could check again
-# and then fallback to a vanilla SSLeay build but then this script
-# wouldn't get updated
-echo Configuring for $OUT
+$PERL ./Configure 2>&1 | grep "$OUT" > /dev/null
+if [ $? = "0" ]; then
+ echo Configuring for $OUT
-if [ "$TEST" = "true" ]; then
- echo $PERL ./Configure $OUT $options
+ if [ "$TEST" = "true" ]; then
+ echo $PERL ./Configure $OUT $options
+ else
+ $PERL ./Configure $OUT $options
+ fi
else
- $PERL ./Configure $OUT $options
+ echo "This system ($OUT) is not supported. See file INSTALL for details."
fi
-
)
-