#
# OpenSSL example configuration file.
-# This is mostly being used for generation of certificate requests.
+# See doc/man5/config.pod for more info.
#
+# This is mostly being used for generation of certificate requests,
+# but may be used for auto loading of providers
+
+# Note that you can include other files from the main configuration
+# file using the .include directive.
+#.include filename
# This definition stops the following lines choking if HOME isn't
# defined.
HOME = .
-RANDFILE = $ENV::HOME/.rnd
+
+ # Use this in order to automatically load providers.
+openssl_conf = openssl_init
+
+# Comment out the next line to ignore configuration errors
+config_diagnostics = 1
# Extra OBJECT IDENTIFIER info:
-#oid_file = $ENV::HOME/.oid
-oid_section = new_oids
+# oid_file = $ENV::HOME/.oid
+oid_section = new_oids
# To use this configuration file with the "-extfile" option of the
# "openssl x509" utility, name here the section containing the
# X.509v3 extensions to use:
-# extensions =
+# extensions =
# (Alternatively, use a configuration file that has only
# X.509v3 extensions in its main [= default] section.)
[ new_oids ]
-
# We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
# Add a simple OID like this:
# testoid1=1.2.3.4
tsa_policy2 = 1.2.3.4.5.6
tsa_policy3 = 1.2.3.4.5.7
+# For FIPS
+# Optionally include a file that is generated by the OpenSSL fipsinstall
+# application. This file contains configuration data required by the OpenSSL
+# fips provider. It contains a named section e.g. [fips_sect] which is
+# referenced from the [provider_sect] below.
+# Refer to the OpenSSL security policy for more information.
+# .include fipsmodule.cnf
+
+[openssl_init]
+providers = provider_sect
+
+# List of providers to load
+[provider_sect]
+default = default_sect
+# The fips section name should match the section name inside the
+# included fipsmodule.cnf.
+# fips = fips_sect
+
+# If no providers are activated explicitly, the default one is activated implicitly.
+# See man 7 OSSL_PROVIDER-default for more details.
+#
+# If you add a section explicitly activating any other provider(s), you most
+# probably need to explicitly activate the default provider, otherwise it
+# becomes unavailable in openssl. As a consequence applications depending on
+# OpenSSL may not work correctly which could lead to significant system
+# problems including inability to remotely access the system.
+[default_sect]
+# activate = 1
+
+
####################################################################
[ ca ]
default_ca = CA_default # The default ca section
# must be commented out to leave a V1 CRL
crl = $dir/crl.pem # The current CRL
private_key = $dir/private/cakey.pem# The private key
-RANDFILE = $dir/private/.rand # private random number file
x509_extensions = usr_cert # The extensions to add to the cert
# input_password = secret
# output_password = secret
-# This sets a mask for permitted string types. There are several options.
+# This sets a mask for permitted string types. There are several options.
# default: PrintableString, T61String, BMPString.
# pkix : PrintableString, BMPString (PKIX recommendation before 2004)
# utf8only: only UTF8Strings (PKIX recommendation after 2004).
basicConstraints=CA:FALSE
-# Here are some examples of the usage of nsCertType. If it is omitted
-# the certificate can be used for anything *except* object signing.
-
-# This is OK for an SSL server.
-# nsCertType = server
-
-# For an object signing certificate this would be used.
-# nsCertType = objsign
-
-# For normal client use this is typical
-# nsCertType = client, email
-
-# and for everything including object signing:
-# nsCertType = client, email, objsign
-
# This is typical in keyUsage for a client certificate.
# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
-# This will be displayed in Netscape's comment listbox.
-nsComment = "OpenSSL Generated Certificate"
-
# PKIX recommendations harmless if included in all certificates.
subjectKeyIdentifier=hash
authorityKeyIdentifier=keyid,issuer
# Copy subject details
# issuerAltName=issuer:copy
-#nsCaRevocationUrl = http://www.domain.dom/ca-crl.pem
-#nsBaseUrl
-#nsRevocationUrl
-#nsRenewalUrl
-#nsCaPolicyUrl
-#nsSslServerName
-
# This is required for TSA certificates.
# extendedKeyUsage = critical,timeStamping
authorityKeyIdentifier=keyid:always,issuer
-# This is what PKIX recommends but some broken software chokes on critical
-# extensions.
-#basicConstraints = critical,CA:true
-# So we do this instead.
-basicConstraints = CA:true
+basicConstraints = critical,CA:true
# Key usage: this is typical for a CA certificate. However since it will
# prevent it being used as an test self-signed certificate it is best
# left out by default.
# keyUsage = cRLSign, keyCertSign
-# Some might want this also
-# nsCertType = sslCA, emailCA
-
# Include email address in subject alt name: another PKIX recommendation
# subjectAltName=email:copy
# Copy issuer details
basicConstraints=CA:FALSE
-# Here are some examples of the usage of nsCertType. If it is omitted
-# the certificate can be used for anything *except* object signing.
-
-# This is OK for an SSL server.
-# nsCertType = server
-
-# For an object signing certificate this would be used.
-# nsCertType = objsign
-
-# For normal client use this is typical
-# nsCertType = client, email
-
-# and for everything including object signing:
-# nsCertType = client, email, objsign
-
# This is typical in keyUsage for a client certificate.
# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
-# This will be displayed in Netscape's comment listbox.
-nsComment = "OpenSSL Generated Certificate"
-
# PKIX recommendations harmless if included in all certificates.
subjectKeyIdentifier=hash
authorityKeyIdentifier=keyid,issuer
# Copy subject details
# issuerAltName=issuer:copy
-#nsCaRevocationUrl = http://www.domain.dom/ca-crl.pem
-#nsBaseUrl
-#nsRevocationUrl
-#nsRenewalUrl
-#nsCaPolicyUrl
-#nsSslServerName
-
# This really needs to be in place for it to be a proxy certificate.
proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo
certs = $dir/cacert.pem # Certificate chain to include in reply
# (optional)
signer_key = $dir/private/tsakey.pem # The TSA private key (optional)
-
+signer_digest = sha256 # Signing digest to use. (Optional)
default_policy = tsa_policy1 # Policy if request did not specify it
# (optional)
other_policies = tsa_policy2, tsa_policy3 # acceptable policies (optional)
-digests = md5, sha1 # Acceptable message digests (mandatory)
+digests = sha1, sha256, sha384, sha512 # Acceptable message digests (mandatory)
accuracy = secs:1, millisecs:500, microsecs:100 # (optional)
clock_precision_digits = 0 # number of digits after dot. (optional)
ordering = yes # Is ordering defined for timestamps?
# (optional, default: no)
ess_cert_id_chain = no # Must the ESS cert id chain be included?
# (optional, default: no)
+ess_cert_id_alg = sha1 # algorithm to compute certificate
+ # identifier (optional, default: sha1)
+
+[insta] # CMP using Insta Demo CA
+# Message transfer
+server = pki.certificate.fi:8700
+# proxy = # set this as far as needed, e.g., http://192.168.1.1:8080
+# tls_use = 0
+path = pkix/
+
+# Server authentication
+recipient = "/C=FI/O=Insta Demo/CN=Insta Demo CA" # or set srvcert or issuer
+ignore_keyusage = 1 # potentially needed quirk
+unprotected_errors = 1 # potentially needed quirk
+extracertsout = insta.extracerts.pem
+
+# Client authentication
+ref = 3078 # user identification
+secret = pass:insta # can be used for both client and server side
+
+# Generic message options
+cmd = ir # default operation, can be overridden on cmd line with, e.g., kur
+
+# Certificate enrollment
+subject = "/CN=openssl-cmp-test"
+newkey = insta.priv.pem
+out_trusted = insta.ca.crt
+certout = insta.cert.pem
+
+[pbm] # Password-based protection for Insta CA
+# Server and client authentication
+ref = $insta::ref # 3078
+secret = $insta::secret # pass:insta
+
+[signature] # Signature-based protection for Insta CA
+# Server authentication
+trusted = insta.ca.crt # does not include keyUsage digitalSignature
+
+# Client authentication
+secret = # disable PBM
+key = $insta::newkey # insta.priv.pem
+cert = $insta::certout # insta.cert.pem
+
+[ir]
+cmd = ir
+
+[cr]
+cmd = cr
+
+[kur]
+# Certificate update
+cmd = kur
+oldcert = $insta::certout # insta.cert.pem
+
+[rr]
+# Certificate revocation
+cmd = rr
+oldcert = $insta::certout # insta.cert.pem
projects / openssl.git / blobdiff