#
-# SSLeay example configuration file.
-# This is mostly being used for generation of certificate requests.
+# OpenSSL example configuration file.
+# See doc/man5/config.pod for more info.
#
+# This is mostly being used for generation of certificate requests,
+# but may be used for auto loading of providers
+
+# Note that you can include other files from the main configuration
+# file using the .include directive.
+#.include filename
+
+# This definition stops the following lines choking if HOME isn't
+# defined.
+HOME = .
+
+ # Use this in order to automatically load providers.
+openssl_conf = openssl_init
+
+# Comment out the next line to ignore configuration errors
+config_diagnostics = 1
+
+# Extra OBJECT IDENTIFIER info:
+# oid_file = $ENV::HOME/.oid
+oid_section = new_oids
+
+# To use this configuration file with the "-extfile" option of the
+# "openssl x509" utility, name here the section containing the
+# X.509v3 extensions to use:
+# extensions =
+# (Alternatively, use a configuration file that has only
+# X.509v3 extensions in its main [= default] section.)
+
+[ new_oids ]
+# We can add new OIDs in here for use by 'ca', 'req' and 'ts'.
+# Add a simple OID like this:
+# testoid1=1.2.3.4
+# Or use config file substitution like this:
+# testoid2=${testoid1}.5.6
+
+# Policies used by the TSA examples.
+tsa_policy1 = 1.2.3.4.1
+tsa_policy2 = 1.2.3.4.5.6
+tsa_policy3 = 1.2.3.4.5.7
+
+# For FIPS
+# Optionally include a file that is generated by the OpenSSL fipsinstall
+# application. This file contains configuration data required by the OpenSSL
+# fips provider. It contains a named section e.g. [fips_sect] which is
+# referenced from the [provider_sect] below.
+# Refer to the OpenSSL security policy for more information.
+# .include fipsmodule.cnf
+
+[openssl_init]
+providers = provider_sect
+
+# List of providers to load
+[provider_sect]
+default = default_sect
+# The fips section name should match the section name inside the
+# included fipsmodule.cnf.
+# fips = fips_sect
+
+# If no providers are activated explicitly, the default one is activated implicitly.
+# See man 7 OSSL_PROVIDER-default for more details.
+#
+# If you add a section explicitly activating any other provider(s), you most
+# probably need to explicitly activate the default provider, otherwise it
+# becomes unavailable in openssl. As a consequence applications depending on
+# OpenSSL may not work correctly which could lead to significant system
+# problems including inability to remotely access the system.
+[default_sect]
+# activate = 1
-RANDFILE = $ENV::HOME/.rnd
####################################################################
[ ca ]
certs = $dir/certs # Where the issued certs are kept
crl_dir = $dir/crl # Where the issued crl are kept
database = $dir/index.txt # database index file.
+#unique_subject = no # Set to 'no' to allow creation of
+ # several certs with same subject.
new_certs_dir = $dir/newcerts # default place for new certs.
certificate = $dir/cacert.pem # The CA certificate
serial = $dir/serial # The current serial number
+crlnumber = $dir/crlnumber # the current crl number
+ # must be commented out to leave a V1 CRL
crl = $dir/crl.pem # The current CRL
private_key = $dir/private/cakey.pem# The private key
-RANDFILE = $dir/private/.rand # private random number file
-x509_extensions = x509v3_extensions # The extentions to add to the cert
+x509_extensions = usr_cert # The extensions to add to the cert
+
+# Comment out the following two lines for the "traditional"
+# (and highly broken) format.
+name_opt = ca_default # Subject Name options
+cert_opt = ca_default # Certificate field options
+
+# Extension copying option: use with caution.
+# copy_extensions = copy
+
+# Extensions to add to a CRL. Note: Netscape communicator chokes on V2 CRLs
+# so this is commented out by default to leave a V1 CRL.
+# crlnumber must also be commented out to leave a V1 CRL.
+# crl_extensions = crl_ext
+
default_days = 365 # how long to certify for
default_crl_days= 30 # how long before next CRL
-default_md = md5 # which md to use.
+default_md = default # use public key default MD
preserve = no # keep passed DN ordering
# A few difference way of specifying how similar the request should look
####################################################################
[ req ]
-default_bits = 1024
+default_bits = 2048
default_keyfile = privkey.pem
distinguished_name = req_distinguished_name
attributes = req_attributes
+x509_extensions = v3_ca # The extensions to add to the self signed cert
+
+# Passwords for private keys if not present they will be prompted for
+# input_password = secret
+# output_password = secret
+
+# This sets a mask for permitted string types. There are several options.
+# default: PrintableString, T61String, BMPString.
+# pkix : PrintableString, BMPString (PKIX recommendation before 2004)
+# utf8only: only UTF8Strings (PKIX recommendation after 2004).
+# nombstr : PrintableString, T61String (no BMPStrings or UTF8Strings).
+# MASK:XXXX a literal mask value.
+# WARNING: ancient versions of Netscape crash on BMPStrings or UTF8Strings.
+string_mask = utf8only
+
+# req_extensions = v3_req # The extensions to add to a certificate request
[ req_distinguished_name ]
countryName = Country Name (2 letter code)
# we can do this but it is not needed normally :-)
#1.organizationName = Second Organization Name (eg, company)
-#1.organizationName_default = CryptSoft Pty Ltd
+#1.organizationName_default = World Wide Web Pty Ltd
organizationalUnitName = Organizational Unit Name (eg, section)
#organizationalUnitName_default =
-commonName = Common Name (eg, YOUR name)
+commonName = Common Name (e.g. server FQDN or YOUR name)
commonName_max = 64
emailAddress = Email Address
-emailAddress_max = 40
+emailAddress_max = 64
+
+# SET-ex3 = SET extension number 3
[ req_attributes ]
challengePassword = A challenge password
unstructuredName = An optional company name
-[ x509v3_extensions ]
+[ usr_cert ]
+
+# These extensions are added when 'ca' signs a request.
+
+# This goes against PKIX guidelines but some CAs do it and some software
+# requires this to avoid interpreting an end user certificate as a CA.
+
+basicConstraints=CA:FALSE
+
+# This is typical in keyUsage for a client certificate.
+# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
+
+# PKIX recommendations harmless if included in all certificates.
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid,issuer
+
+# This stuff is for subjectAltName and issuerAltname.
+# Import the email address.
+# subjectAltName=email:copy
+# An alternative to produce certificates that aren't
+# deprecated according to PKIX.
+# subjectAltName=email:move
+
+# Copy subject details
+# issuerAltName=issuer:copy
+
+# This is required for TSA certificates.
+# extendedKeyUsage = critical,timeStamping
+
+[ v3_req ]
+
+# Extensions to add to a certificate request
+
+basicConstraints = CA:FALSE
+keyUsage = nonRepudiation, digitalSignature, keyEncipherment
+
+[ v3_ca ]
+
+
+# Extensions for a typical CA
+
+
+# PKIX recommendation.
+
+subjectKeyIdentifier=hash
+
+authorityKeyIdentifier=keyid:always,issuer
+
+basicConstraints = critical,CA:true
+
+# Key usage: this is typical for a CA certificate. However since it will
+# prevent it being used as an test self-signed certificate it is best
+# left out by default.
+# keyUsage = cRLSign, keyCertSign
+
+# Include email address in subject alt name: another PKIX recommendation
+# subjectAltName=email:copy
+# Copy issuer details
+# issuerAltName=issuer:copy
+
+# DER hex encoding of an extension: beware experts only!
+# obj=DER:02:03
+# Where 'obj' is a standard or added object
+# You can even override a supported extension:
+# basicConstraints= critical, DER:30:03:01:01:FF
+
+[ crl_ext ]
+
+# CRL extensions.
+# Only issuerAltName and authorityKeyIdentifier make any sense in a CRL.
+
+# issuerAltName=issuer:copy
+authorityKeyIdentifier=keyid:always
+
+[ proxy_cert_ext ]
+# These extensions should be added when creating a proxy certificate
+
+# This goes against PKIX guidelines but some CAs do it and some software
+# requires this to avoid interpreting an end user certificate as a CA.
+
+basicConstraints=CA:FALSE
+
+# This is typical in keyUsage for a client certificate.
+# keyUsage = nonRepudiation, digitalSignature, keyEncipherment
+
+# PKIX recommendations harmless if included in all certificates.
+subjectKeyIdentifier=hash
+authorityKeyIdentifier=keyid,issuer
+
+# This stuff is for subjectAltName and issuerAltname.
+# Import the email address.
+# subjectAltName=email:copy
+# An alternative to produce certificates that aren't
+# deprecated according to PKIX.
+# subjectAltName=email:move
+
+# Copy subject details
+# issuerAltName=issuer:copy
+
+# This really needs to be in place for it to be a proxy certificate.
+proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:3,policy:foo
+
+####################################################################
+[ tsa ]
+
+default_tsa = tsa_config1 # the default TSA section
+
+[ tsa_config1 ]
+
+# These are used by the TSA reply generation only.
+dir = ./demoCA # TSA root directory
+serial = $dir/tsaserial # The current serial number (mandatory)
+crypto_device = builtin # OpenSSL engine to use for signing
+signer_cert = $dir/tsacert.pem # The TSA signing certificate
+ # (optional)
+certs = $dir/cacert.pem # Certificate chain to include in reply
+ # (optional)
+signer_key = $dir/private/tsakey.pem # The TSA private key (optional)
+signer_digest = sha256 # Signing digest to use. (Optional)
+default_policy = tsa_policy1 # Policy if request did not specify it
+ # (optional)
+other_policies = tsa_policy2, tsa_policy3 # acceptable policies (optional)
+digests = sha1, sha256, sha384, sha512 # Acceptable message digests (mandatory)
+accuracy = secs:1, millisecs:500, microsecs:100 # (optional)
+clock_precision_digits = 0 # number of digits after dot. (optional)
+ordering = yes # Is ordering defined for timestamps?
+ # (optional, default: no)
+tsa_name = yes # Must the TSA name be included in the reply?
+ # (optional, default: no)
+ess_cert_id_chain = no # Must the ESS cert id chain be included?
+ # (optional, default: no)
+ess_cert_id_alg = sha1 # algorithm to compute certificate
+ # identifier (optional, default: sha1)
+
+[insta] # CMP using Insta Demo CA
+# Message transfer
+server = pki.certificate.fi:8700
+# proxy = # set this as far as needed, e.g., http://192.168.1.1:8080
+# tls_use = 0
+path = pkix/
+
+# Server authentication
+recipient = "/C=FI/O=Insta Demo/CN=Insta Demo CA" # or set srvcert or issuer
+ignore_keyusage = 1 # potentially needed quirk
+unprotected_errors = 1 # potentially needed quirk
+extracertsout = insta.extracerts.pem
+
+# Client authentication
+ref = 3078 # user identification
+secret = pass:insta # can be used for both client and server side
+
+# Generic message options
+cmd = ir # default operation, can be overridden on cmd line with, e.g., kur
+
+# Certificate enrollment
+subject = "/CN=openssl-cmp-test"
+newkey = insta.priv.pem
+out_trusted = insta.ca.crt
+certout = insta.cert.pem
+
+[pbm] # Password-based protection for Insta CA
+# Server and client authentication
+ref = $insta::ref # 3078
+secret = $insta::secret # pass:insta
+
+[signature] # Signature-based protection for Insta CA
+# Server authentication
+trusted = insta.ca.crt # does not include keyUsage digitalSignature
+
+# Client authentication
+secret = # disable PBM
+key = $insta::newkey # insta.priv.pem
+cert = $insta::certout # insta.cert.pem
-nsCaRevocationUrl = http://www.cryptsoft.com/ca-crl.pem
-nsComment = "This is a comment"
+[ir]
+cmd = ir
-# under ASN.1, the 0 bit would be encoded as 80
-nsCertType = 0x40
+[cr]
+cmd = cr
-#nsBaseUrl
-#nsRevocationUrl
-#nsRenewalUrl
-#nsCaPolicyUrl
-#nsSslServerName
-#nsCertSequence
-#nsCertExt
-#nsDataType
+[kur]
+# Certificate update
+cmd = kur
+oldcert = $insta::certout # insta.cert.pem
+[rr]
+# Certificate revocation
+cmd = rr
+oldcert = $insta::certout # insta.cert.pem
projects / openssl.git / blobdiff