}
}
+# If any %useradd entry has been set, we must check that the environment
+# variables haven't been set. We start by checking of any %useradd entry
+# is set.
if (grep { scalar @$_ > 0 } values %useradd) {
- my $detected_env = join(', ', grep { @{$useradd{$_}} || env($_) }
- sort keys %useradd);
- if ($detected_env) {
+ # Hash of env / make variables names. The possible values are:
+ # 1 - environment set
+ # 2 - %useradd entry set
+ # 3 - both set
+ my %detected_env =
+ map { my $v = 0;
+ $v += 1 if env($_);
+ $v += 2 if @{$useradd{$_}};
+ $_ => $v }
+ keys %useradd;
+
+ # If any of the corresponding environment variables is set, we error
+ if (grep { $_ & 1 } values %detected_env) {
+ my $names = join(', ', grep { $detected_env{$_} > 0 }
+ sort keys %detected_env);
die <<"_____";
***** Mixing env / make variables and additional compiler/linker flags as
***** configure command line option is not permitted.
-***** Affected env / make variables: $detected_env
+***** Affected env / make variables: $names
_____
}
}
$target{dso_scheme} =~ tr/[a-z]/[A-Z]/;
if ($target{dso_scheme} eq "DLFCN")
{
- unshift @{$config{defines}}, "DSO_DLFCN", "HAVE_DLFCN_H";
+ unshift @{$config{lib_defines}}, "DSO_DLFCN", "HAVE_DLFCN_H";
}
elsif ($target{dso_scheme} eq "DLFCN_NO_H")
{
- unshift @{$config{defines}}, "DSO_DLFCN";
+ unshift @{$config{lib_defines}}, "DSO_DLFCN";
}
else
{
- unshift @{$config{defines}}, "DSO_$target{dso_scheme}";
+ unshift @{$config{lib_defines}}, "DSO_$target{dso_scheme}";
}
}
}
if ($disabled{"dynamic-engine"}) {
- push @{$config{defines}}, "OPENSSL_NO_DYNAMIC_ENGINE";
+ push @{$config{openssl_other_defines}}, "OPENSSL_NO_DYNAMIC_ENGINE";
$config{dynamic_engines} = 0;
} else {
- push @{$config{defines}}, "OPENSSL_NO_STATIC_ENGINE";
+ push @{$config{openssl_other_defines}}, "OPENSSL_NO_STATIC_ENGINE";
$config{dynamic_engines} = 1;
}
}
else
{
- push @{$config{defines}}, "OPENSSL_PIC";
+ push @{$config{lib_defines}}, "OPENSSL_PIC";
}
if ($target{sys_id} ne "")
unless ($disabled{asm}) {
$target{cpuid_asm_src}=$table{DEFAULTS}->{cpuid_asm_src} if ($config{processor} eq "386");
- push @{$config{defines}}, "OPENSSL_CPUID_OBJ" if ($target{cpuid_asm_src} ne "mem_clr.c");
+ push @{$config{lib_defines}}, "OPENSSL_CPUID_OBJ" if ($target{cpuid_asm_src} ne "mem_clr.c");
$target{bn_asm_src} =~ s/\w+-gf2m.c// if (defined($disabled{ec2m}));
# bn-586 is the only one implementing bn_*_part_words
- push @{$config{defines}}, "OPENSSL_BN_ASM_PART_WORDS" if ($target{bn_asm_src} =~ /bn-586/);
- push @{$config{defines}}, "OPENSSL_IA32_SSE2" if (!$disabled{sse2} && $target{bn_asm_src} =~ /86/);
+ push @{$config{lib_defines}}, "OPENSSL_BN_ASM_PART_WORDS" if ($target{bn_asm_src} =~ /bn-586/);
+ push @{$config{lib_defines}}, "OPENSSL_IA32_SSE2" if (!$disabled{sse2} && $target{bn_asm_src} =~ /86/);
- push @{$config{defines}}, "OPENSSL_BN_ASM_MONT" if ($target{bn_asm_src} =~ /-mont/);
- push @{$config{defines}}, "OPENSSL_BN_ASM_MONT5" if ($target{bn_asm_src} =~ /-mont5/);
- push @{$config{defines}}, "OPENSSL_BN_ASM_GF2m" if ($target{bn_asm_src} =~ /-gf2m/);
+ push @{$config{lib_defines}}, "OPENSSL_BN_ASM_MONT" if ($target{bn_asm_src} =~ /-mont/);
+ push @{$config{lib_defines}}, "OPENSSL_BN_ASM_MONT5" if ($target{bn_asm_src} =~ /-mont5/);
+ push @{$config{lib_defines}}, "OPENSSL_BN_ASM_GF2m" if ($target{bn_asm_src} =~ /-gf2m/);
if ($target{sha1_asm_src}) {
- push @{$config{defines}}, "SHA1_ASM" if ($target{sha1_asm_src} =~ /sx86/ || $target{sha1_asm_src} =~ /sha1/);
- push @{$config{defines}}, "SHA256_ASM" if ($target{sha1_asm_src} =~ /sha256/);
- push @{$config{defines}}, "SHA512_ASM" if ($target{sha1_asm_src} =~ /sha512/);
+ push @{$config{lib_defines}}, "SHA1_ASM" if ($target{sha1_asm_src} =~ /sx86/ || $target{sha1_asm_src} =~ /sha1/);
+ push @{$config{lib_defines}}, "SHA256_ASM" if ($target{sha1_asm_src} =~ /sha256/);
+ push @{$config{lib_defines}}, "SHA512_ASM" if ($target{sha1_asm_src} =~ /sha512/);
}
if ($target{rc4_asm_src} ne $table{DEFAULTS}->{rc4_asm_src}) {
- push @{$config{defines}}, "RC4_ASM";
+ push @{$config{lib_defines}}, "RC4_ASM";
}
if ($target{md5_asm_src}) {
- push @{$config{defines}}, "MD5_ASM";
+ push @{$config{lib_defines}}, "MD5_ASM";
}
$target{cast_asm_src}=$table{DEFAULTS}->{cast_asm_src} unless $disabled{pic}; # CAST assembler is not PIC
if ($target{rmd160_asm_src}) {
- push @{$config{defines}}, "RMD160_ASM";
+ push @{$config{lib_defines}}, "RMD160_ASM";
}
if ($target{aes_asm_src}) {
- push @{$config{defines}}, "AES_ASM" if ($target{aes_asm_src} =~ m/\baes-/);;
+ push @{$config{lib_defines}}, "AES_ASM" if ($target{aes_asm_src} =~ m/\baes-/);;
# aes-ctr.fake is not a real file, only indication that assembler
# module implements AES_ctr32_encrypt...
- push @{$config{defines}}, "AES_CTR_ASM" if ($target{aes_asm_src} =~ s/\s*aes-ctr\.fake//);
+ push @{$config{lib_defines}}, "AES_CTR_ASM" if ($target{aes_asm_src} =~ s/\s*aes-ctr\.fake//);
# aes-xts.fake indicates presence of AES_xts_[en|de]crypt...
- push @{$config{defines}}, "AES_XTS_ASM" if ($target{aes_asm_src} =~ s/\s*aes-xts\.fake//);
+ push @{$config{lib_defines}}, "AES_XTS_ASM" if ($target{aes_asm_src} =~ s/\s*aes-xts\.fake//);
$target{aes_asm_src} =~ s/\s*(vpaes|aesni)-x86\.s//g if ($disabled{sse2});
- push @{$config{defines}}, "VPAES_ASM" if ($target{aes_asm_src} =~ m/vpaes/);
- push @{$config{defines}}, "BSAES_ASM" if ($target{aes_asm_src} =~ m/bsaes/);
+ push @{$config{lib_defines}}, "VPAES_ASM" if ($target{aes_asm_src} =~ m/vpaes/);
+ push @{$config{lib_defines}}, "BSAES_ASM" if ($target{aes_asm_src} =~ m/bsaes/);
}
if ($target{wp_asm_src} =~ /mmx/) {
if ($config{processor} eq "386") {
$target{wp_asm_src}=$table{DEFAULTS}->{wp_asm_src};
} elsif (!$disabled{"whirlpool"}) {
- push @{$config{defines}}, "WHIRLPOOL_ASM";
+ push @{$config{lib_defines}}, "WHIRLPOOL_ASM";
}
}
if ($target{modes_asm_src} =~ /ghash-/) {
- push @{$config{defines}}, "GHASH_ASM";
+ push @{$config{lib_defines}}, "GHASH_ASM";
}
if ($target{ec_asm_src} =~ /ecp_nistz256/) {
- push @{$config{defines}}, "ECP_NISTZ256_ASM";
+ push @{$config{lib_defines}}, "ECP_NISTZ256_ASM";
}
if ($target{ec_asm_src} =~ /x25519/) {
- push @{$config{defines}}, "X25519_ASM";
+ push @{$config{lib_defines}}, "X25519_ASM";
}
if ($target{padlock_asm_src} ne $table{DEFAULTS}->{padlock_asm_src}) {
- push @{$config{defines}}, "PADLOCK_ASM";
+ push @{$config{lib_defines}}, "PADLOCK_ASM";
}
if ($target{poly1305_asm_src} ne "") {
- push @{$config{defines}}, "POLY1305_ASM";
+ push @{$config{lib_defines}}, "POLY1305_ASM";
}
}
my %sharednames = ();
my %generate = ();
+ # We want to detect configdata.pm in the source tree, so we
+ # don't use it if the build tree is different.
+ my $src_configdata = cleanfile($srcdir, "configdata.pm", $blddir);
+
push @{$config{build_infos}}, catfile(abs2rel($sourced, $blddir), $f);
my $template =
Text::Template->new(TYPE => 'FILE',
# If it isn't in the source tree, we assume it's generated
# in the build tree
- if (! -f $s || $generate{$_}) {
+ if ($s eq $src_configdata || ! -f $s || $generate{$_}) {
$s = cleanfile($buildd, $_, $blddir);
}
# We recognise C++, C and asm files
# If it isn't in the source tree, we assume it's generated
# in the build tree
- if (! -f $s || $generate{$_}) {
+ if ($s eq $src_configdata || ! -f $s || $generate{$_}) {
$s = cleanfile($buildd, $_, $blddir);
}
# If the destination doesn't exist in source, it can only be
# a generated file in the build tree.
- if ($ddest ne "" && ! -f $ddest) {
+ if ($ddest ne "" && ($ddest eq $src_configdata || ! -f $ddest)) {
$ddest = cleanfile($buildd, $_, $blddir);
if ($unified_info{rename}->{$ddest}) {
$ddest = $unified_info{rename}->{$ddest};
# in the build tree rather than the source tree, and assume
# and that there are lines to build it in a BEGINRAW..ENDRAW
# section or in the Makefile template.
- if (! -f $d
+ if ($d eq $src_configdata
+ || ! -f $d
|| (grep { $d eq $_ }
map { cleanfile($srcdir, $_, $blddir) }
grep { /\.h$/ } keys %{$unified_info{generate}})) {
# If the destination doesn't exist in source, it can only be
# a generated file in the build tree.
- if (! -f $ddest) {
+ if ($ddest eq $src_configdata || ! -f $ddest) {
$ddest = cleanfile($buildd, $_, $blddir);
if ($unified_info{rename}->{$ddest}) {
$ddest = $unified_info{rename}->{$ddest};
next if $dest eq "";
foreach my $d (keys %{$unified_info{depends}->{$dest}}) {
next unless $d =~ /\.(h|pm)$/;
- if ($d eq "configdata.pm"
- || defined($unified_info{generate}->{$d})) {
- my $i = cleandir($blddir, dirname($d));
- push @{$unified_info{includes}->{$dest}->{build}}, $i
- unless grep { $_ eq $i } @{$unified_info{includes}->{$dest}->{build}};
- } else {
- my $i = cleandir($srcdir, dirname($d));
- push @{$unified_info{includes}->{$dest}->{source}}, $i
- unless grep { $_ eq $i } @{$unified_info{includes}->{$dest}->{source}};
- }
+ my $i = dirname($d);
+ my $spot =
+ $d eq "configdata.pm" || defined($unified_info{generate}->{$d})
+ ? 'build' : 'source';
+ push @{$unified_info{includes}->{$dest}->{$spot}}, $i
+ unless grep { $_ eq $i } @{$unified_info{includes}->{$dest}->{$spot}};
}
}
you have tried with a current version of OpenSSL).
EOF
-print <<"EOF" if (-f catfile($srcdir, "configdata.pm") && $srcdir ne $blddir);
-
-WARNING: there are indications that another build was made in the source
-directory. This build may have picked up artifacts from that build, the
-safest course of action is to clean the source directory and redo this
-configuration.
-EOF
-
print <<"EOF";
**********************************************************************
projects / openssl.git / blobdiff