OpenSSL CHANGES
_______________
- Changes between 1.0.1 and 1.1.0 [xx XXX xxxx]
+ Changes between 1.0.2 and 1.1.0 [xx XXX xxxx]
+
+ *) Experimental support for a new, fast, unbiased prime candidate generator,
+ bn_probable_prime_dh_coprime(). Not currently used by any prime generator.
+ [Felix Laurie von Massenbach <felix@erbridge.co.uk>]
+
+ *) New output format NSS in the sess_id command line tool. This allows
+ exporting the session id and the master key in NSS keylog format.
+ [Martin Kaiser <martin@kaiser.cx>]
+
+ *) Harmonize version and its documentation. -f flag is used to display
+ compilation flags.
+ [mancha <mancha1@zoho.com>]
+
+ *) Fix eckey_priv_encode so it immediately returns an error upon a failure
+ in i2d_ECPrivateKey.
+ [mancha <mancha1@zoho.com>]
+
+ *) Fix some double frees. These are not thought to be exploitable.
+ [mancha <mancha1@zoho.com>]
+
+ *) A missing bounds check in the handling of the TLS heartbeat extension
+ can be used to reveal up to 64k of memory to a connected client or
+ server.
+
+ Thanks for Neel Mehta of Google Security for discovering this bug and to
+ Adam Langley <agl@chromium.org> and Bodo Moeller <bmoeller@acm.org> for
+ preparing the fix (CVE-2014-0160)
+ [Adam Langley, Bodo Moeller]
+
+ *) Fix for the attack described in the paper "Recovering OpenSSL
+ ECDSA Nonces Using the FLUSH+RELOAD Cache Side-channel Attack"
+ by Yuval Yarom and Naomi Benger. Details can be obtained from:
+ http://eprint.iacr.org/2014/140
+
+ Thanks to Yuval Yarom and Naomi Benger for discovering this
+ flaw and to Yuval Yarom for supplying a fix (CVE-2014-0076)
+ [Yuval Yarom and Naomi Benger]
+
+ *) Use algorithm specific chains in SSL_CTX_use_certificate_chain_file():
+ this fixes a limitation in previous versions of OpenSSL.
+ [Steve Henson]
+
+ *) Experimental encrypt-then-mac support.
+
+ Experimental support for encrypt then mac from
+ draft-gutmann-tls-encrypt-then-mac-02.txt
+
+ To enable it set the appropriate extension number (0x42 for the test
+ server) using e.g. -DTLSEXT_TYPE_encrypt_then_mac=0x42
+
+ For non-compliant peers (i.e. just about everything) this should have no
+ effect.
+
+ WARNING: EXPERIMENTAL, SUBJECT TO CHANGE.
+
+ [Steve Henson]
+
+ *) Add EVP support for key wrapping algorithms, to avoid problems with
+ existing code the flag EVP_CIPHER_CTX_WRAP_ALLOW has to be set in
+ the EVP_CIPHER_CTX or an error is returned. Add AES and DES3 wrap
+ algorithms and include tests cases.
+ [Steve Henson]
+
+ *) Extend CMS code to support RSA-PSS signatures and RSA-OAEP for
+ enveloped data.
+ [Steve Henson]
+
+ *) Extended RSA OAEP support via EVP_PKEY API. Options to specify digest,
+ MGF1 digest and OAEP label.
+ [Steve Henson]
+
+ *) Make openssl verify return errors.
+ [Chris Palmer <palmer@google.com> and Ben Laurie]
+
+ *) New function ASN1_TIME_diff to calculate the difference between two
+ ASN1_TIME structures or one structure and the current time.
+ [Steve Henson]
+
+ *) Update fips_test_suite to support multiple command line options. New
+ test to induce all self test errors in sequence and check expected
+ failures.
+ [Steve Henson]
+
+ *) Add FIPS_{rsa,dsa,ecdsa}_{sign,verify} functions which digest and
+ sign or verify all in one operation.
+ [Steve Henson]
+
+ *) Add fips_algvs: a multicall fips utility incorporating all the algorithm
+ test programs and fips_test_suite. Includes functionality to parse
+ the minimal script output of fipsalgest.pl directly.
+ [Steve Henson]
+
+ *) Add authorisation parameter to FIPS_module_mode_set().
+ [Steve Henson]
+
+ *) Add FIPS selftest for ECDH algorithm using P-224 and B-233 curves.
+ [Steve Henson]
+
+ *) Use separate DRBG fields for internal and external flags. New function
+ FIPS_drbg_health_check() to perform on demand health checking. Add
+ generation tests to fips_test_suite with reduced health check interval to
+ demonstrate periodic health checking. Add "nodh" option to
+ fips_test_suite to skip very slow DH test.
+ [Steve Henson]
+
+ *) New function FIPS_get_cipherbynid() to lookup FIPS supported ciphers
+ based on NID.
+ [Steve Henson]
+
+ *) More extensive health check for DRBG checking many more failure modes.
+ New function FIPS_selftest_drbg_all() to handle every possible DRBG
+ combination: call this in fips_test_suite.
+ [Steve Henson]
+
+ *) Add support for Dual EC DRBG from SP800-90. Update DRBG algorithm test
+ and POST to handle Dual EC cases.
+ [Steve Henson]
+
+ *) Add support for canonical generation of DSA parameter 'g'. See
+ FIPS 186-3 A.2.3.
+
+ *) Add support for HMAC DRBG from SP800-90. Update DRBG algorithm test and
+ POST to handle HMAC cases.
+ [Steve Henson]
+
+ *) Add functions FIPS_module_version() and FIPS_module_version_text()
+ to return numerical and string versions of the FIPS module number.
+ [Steve Henson]
+
+ *) Rename FIPS_mode_set and FIPS_mode to FIPS_module_mode_set and
+ FIPS_module_mode. FIPS_mode and FIPS_mode_set will be implemented
+ outside the validated module in the FIPS capable OpenSSL.
+ [Steve Henson]
+
+ *) Minor change to DRBG entropy callback semantics. In some cases
+ there is no multiple of the block length between min_len and
+ max_len. Allow the callback to return more than max_len bytes
+ of entropy but discard any extra: it is the callback's responsibility
+ to ensure that the extra data discarded does not impact the
+ requested amount of entropy.
+ [Steve Henson]
+
+ *) Add PRNG security strength checks to RSA, DSA and ECDSA using
+ information in FIPS186-3, SP800-57 and SP800-131A.
+ [Steve Henson]
+
+ *) CCM support via EVP. Interface is very similar to GCM case except we
+ must supply all data in one chunk (i.e. no update, final) and the
+ message length must be supplied if AAD is used. Add algorithm test
+ support.
+ [Steve Henson]
+
+ *) Initial version of POST overhaul. Add POST callback to allow the status
+ of POST to be monitored and/or failures induced. Modify fips_test_suite
+ to use callback. Always run all selftests even if one fails.
+ [Steve Henson]
+
+ *) XTS support including algorithm test driver in the fips_gcmtest program.
+ Note: this does increase the maximum key length from 32 to 64 bytes but
+ there should be no binary compatibility issues as existing applications
+ will never use XTS mode.
+ [Steve Henson]
+
+ *) Extensive reorganisation of FIPS PRNG behaviour. Remove all dependencies
+ to OpenSSL RAND code and replace with a tiny FIPS RAND API which also
+ performs algorithm blocking for unapproved PRNG types. Also do not
+ set PRNG type in FIPS_mode_set(): leave this to the application.
+ Add default OpenSSL DRBG handling: sets up FIPS PRNG and seeds with
+ the standard OpenSSL PRNG: set additional data to a date time vector.
+ [Steve Henson]
+
+ *) Rename old X9.31 PRNG functions of the form FIPS_rand* to FIPS_x931*.
+ This shouldn't present any incompatibility problems because applications
+ shouldn't be using these directly and any that are will need to rethink
+ anyway as the X9.31 PRNG is now deprecated by FIPS 140-2
+ [Steve Henson]
+
+ *) Extensive self tests and health checking required by SP800-90 DRBG.
+ Remove strength parameter from FIPS_drbg_instantiate and always
+ instantiate at maximum supported strength.
+ [Steve Henson]
+
+ *) Add ECDH code to fips module and fips_ecdhvs for primitives only testing.
+ [Steve Henson]
+
+ *) New algorithm test program fips_dhvs to handle DH primitives only testing.
+ [Steve Henson]
+
+ *) New function DH_compute_key_padded() to compute a DH key and pad with
+ leading zeroes if needed: this complies with SP800-56A et al.
+ [Steve Henson]
*) Initial implementation of SP800-90 DRBGs for Hash and CTR. Not used by
anything, incomplete, subject to change and largely untested at present.
[Steve Henson]
- *) Modify fipscanisteronly build option to only build the necessary object
- files by filtering FIPS_EX_OBJ through a perl script in crypto/Makefile.
+ *) Modify fipscanisteronly build option to only build the necessary object
+ files by filtering FIPS_EX_OBJ through a perl script in crypto/Makefile.
+ [Steve Henson]
+
+ *) Add experimental option FIPSSYMS to give all symbols in
+ fipscanister.o and FIPS or fips prefix. This will avoid
+ conflicts with future versions of OpenSSL. Add perl script
+ util/fipsas.pl to preprocess assembly language source files
+ and rename any affected symbols.
+ [Steve Henson]
+
+ *) Add selftest checks and algorithm block of non-fips algorithms in
+ FIPS mode. Remove DES2 from selftests.
+ [Steve Henson]
+
+ *) Add ECDSA code to fips module. Add tiny fips_ecdsa_check to just
+ return internal method without any ENGINE dependencies. Add new
+ tiny fips sign and verify functions.
+ [Steve Henson]
+
+ *) New build option no-ec2m to disable characteristic 2 code.
+ [Steve Henson]
+
+ *) New build option "fipscanisteronly". This only builds fipscanister.o
+ and (currently) associated fips utilities. Uses the file Makefile.fips
+ instead of Makefile.org as the prototype.
+ [Steve Henson]
+
+ *) Add some FIPS mode restrictions to GCM. Add internal IV generator.
+ Update fips_gcmtest to use IV generator.
+ [Steve Henson]
+
+ *) Initial, experimental EVP support for AES-GCM. AAD can be input by
+ setting output buffer to NULL. The *Final function must be
+ called although it will not retrieve any additional data. The tag
+ can be set or retrieved with a ctrl. The IV length is by default 12
+ bytes (96 bits) but can be set to an alternative value. If the IV
+ length exceeds the maximum IV length (currently 16 bytes) it cannot be
+ set before the key.
+ [Steve Henson]
+
+ *) New flag in ciphers: EVP_CIPH_FLAG_CUSTOM_CIPHER. This means the
+ underlying do_cipher function handles all cipher semantics itself
+ including padding and finalisation. This is useful if (for example)
+ an ENGINE cipher handles block padding itself. The behaviour of
+ do_cipher is subtly changed if this flag is set: the return value
+ is the number of characters written to the output buffer (zero is
+ no longer an error code) or a negative error code. Also if the
+ input buffer is NULL and length 0 finalisation should be performed.
+ [Steve Henson]
+
+ *) If a candidate issuer certificate is already part of the constructed
+ path ignore it: new debug notification X509_V_ERR_PATH_LOOP for this case.
+ [Steve Henson]
+
+ *) Improve forward-security support: add functions
+
+ void SSL_CTX_set_not_resumable_session_callback(SSL_CTX *ctx, int (*cb)(SSL *ssl, int is_forward_secure))
+ void SSL_set_not_resumable_session_callback(SSL *ssl, int (*cb)(SSL *ssl, int is_forward_secure))
+
+ for use by SSL/TLS servers; the callback function will be called whenever a
+ new session is created, and gets to decide whether the session may be
+ cached to make it resumable (return 0) or not (return 1). (As by the
+ SSL/TLS protocol specifications, the session_id sent by the server will be
+ empty to indicate that the session is not resumable; also, the server will
+ not generate RFC 4507 (RFC 5077) session tickets.)
+
+ A simple reasonable callback implementation is to return is_forward_secure.
+ This parameter will be set to 1 or 0 depending on the ciphersuite selected
+ by the SSL/TLS server library, indicating whether it can provide forward
+ security.
+ [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
+
+ *) New -verify_name option in command line utilities to set verification
+ parameters by name.
+ [Steve Henson]
+
+ *) Initial CMAC implementation. WARNING: EXPERIMENTAL, API MAY CHANGE.
+ Add CMAC pkey methods.
+ [Steve Henson]
+
+ *) Experimental renegotiation in s_server -www mode. If the client
+ browses /reneg connection is renegotiated. If /renegcert it is
+ renegotiated requesting a certificate.
+ [Steve Henson]
+
+ *) Add an "external" session cache for debugging purposes to s_server. This
+ should help trace issues which normally are only apparent in deployed
+ multi-process servers.
+ [Steve Henson]
+
+ *) Extensive audit of libcrypto with DEBUG_UNUSED. Fix many cases where
+ return value is ignored. NB. The functions RAND_add(), RAND_seed(),
+ BIO_set_cipher() and some obscure PEM functions were changed so they
+ can now return an error. The RAND changes required a change to the
+ RAND_METHOD structure.
+ [Steve Henson]
+
+ *) New macro __owur for "OpenSSL Warn Unused Result". This makes use of
+ a gcc attribute to warn if the result of a function is ignored. This
+ is enable if DEBUG_UNUSED is set. Add to several functions in evp.h
+ whose return value is often ignored.
+ [Steve Henson]
+
+ Changes between 1.0.1j and 1.0.2 [xx XXX xxxx]
+
+ *) Tighten handling of the ChangeCipherSpec (CCS) message: reject
+ early CCS messages during renegotiation. (Note that because
+ renegotiation is encrypted, this early CCS was not exploitable.)
+ [Emilia Käsper]
+
+ *) Tighten client-side session ticket handling during renegotiation:
+ ensure that the client only accepts a session ticket if the server sends
+ the extension anew in the ServerHello. Previously, a TLS client would
+ reuse the old extension state and thus accept a session ticket if one was
+ announced in the initial ServerHello.
+
+ Similarly, ensure that the client requires a session ticket if one
+ was advertised in the ServerHello. Previously, a TLS client would
+ ignore a missing NewSessionTicket message.
+ [Emilia Käsper]
+
+ *) Accelerated NIST P-256 elliptic curve implementation for x86_64
+ (other platforms pending).
+ [Shay Gueron & Vlad Krasnov (Intel Corp), Andy Polyakov]
+
+ *) Add support for the SignedCertificateTimestampList certificate and
+ OCSP response extensions from RFC6962.
+ [Rob Stradling]
+
+ *) Fix ec_GFp_simple_points_make_affine (thus, EC_POINTs_mul etc.)
+ for corner cases. (Certain input points at infinity could lead to
+ bogus results, with non-infinity inputs mapped to infinity too.)
+ [Bodo Moeller]
+
+ *) Initial support for PowerISA 2.0.7, first implemented in POWER8.
+ This covers AES, SHA256/512 and GHASH. "Initial" means that most
+ common cases are optimized and there still is room for further
+ improvements. Vector Permutation AES for Altivec is also added.
+ [Andy Polyakov]
+
+ *) Add support for little-endian ppc64 Linux target.
+ [Marcelo Cerri (IBM)]
+
+ *) Initial support for AMRv8 ISA crypto extensions. This covers AES,
+ SHA1, SHA256 and GHASH. "Initial" means that most common cases
+ are optimized and there still is room for further improvements.
+ Both 32- and 64-bit modes are supported.
+ [Andy Polyakov, Ard Biesheuvel (Linaro)]
+
+ *) Improved ARMv7 NEON support.
+ [Andy Polyakov]
+
+ *) Support for SPARC Architecture 2011 crypto extensions, first
+ implemented in SPARC T4. This covers AES, DES, Camellia, SHA1,
+ SHA256/512, MD5, GHASH and modular exponentiation.
+ [Andy Polyakov, David Miller]
+
+ *) Accelerated modular exponentiation for Intel processors, a.k.a.
+ RSAZ.
+ [Shay Gueron & Vlad Krasnov (Intel Corp)]
+
+ *) Support for new and upcoming Intel processors, including AVX2,
+ BMI and SHA ISA extensions. This includes additional "stitched"
+ implementations, AESNI-SHA256 and GCM, and multi-buffer support
+ for TLS encrypt.
+
+ This work was sponsored by Intel Corp.
+ [Andy Polyakov]
+
+ *) Support for DTLS 1.2. This adds two sets of DTLS methods: DTLS_*_method()
+ supports both DTLS 1.2 and 1.0 and should use whatever version the peer
+ supports and DTLSv1_2_*_method() which supports DTLS 1.2 only.
+ [Steve Henson]
+
+ *) Use algorithm specific chains in SSL_CTX_use_certificate_chain_file():
+ this fixes a limiation in previous versions of OpenSSL.
+ [Steve Henson]
+
+ *) Extended RSA OAEP support via EVP_PKEY API. Options to specify digest,
+ MGF1 digest and OAEP label.
+ [Steve Henson]
+
+ *) Add EVP support for key wrapping algorithms, to avoid problems with
+ existing code the flag EVP_CIPHER_CTX_WRAP_ALLOW has to be set in
+ the EVP_CIPHER_CTX or an error is returned. Add AES and DES3 wrap
+ algorithms and include tests cases.
+ [Steve Henson]
+
+ *) Add functions to allocate and set the fields of an ECDSA_METHOD
+ structure.
+ [Douglas E. Engert, Steve Henson]
+
+ *) New functions OPENSSL_gmtime_diff and ASN1_TIME_diff to find the
+ difference in days and seconds between two tm or ASN1_TIME structures.
+ [Steve Henson]
+
+ *) Add -rev test option to s_server to just reverse order of characters
+ received by client and send back to server. Also prints an abbreviated
+ summary of the connection parameters.
+ [Steve Henson]
+
+ *) New option -brief for s_client and s_server to print out a brief summary
+ of connection parameters.
+ [Steve Henson]
+
+ *) Add callbacks for arbitrary TLS extensions.
+ [Trevor Perrin <trevp@trevp.net> and Ben Laurie]
+
+ *) New option -crl_download in several openssl utilities to download CRLs
+ from CRLDP extension in certificates.
+ [Steve Henson]
+
+ *) New options -CRL and -CRLform for s_client and s_server for CRLs.
+ [Steve Henson]
+
+ *) New function X509_CRL_diff to generate a delta CRL from the difference
+ of two full CRLs. Add support to "crl" utility.
+ [Steve Henson]
+
+ *) New functions to set lookup_crls function and to retrieve
+ X509_STORE from X509_STORE_CTX.
+ [Steve Henson]
+
+ *) Print out deprecated issuer and subject unique ID fields in
+ certificates.
+ [Steve Henson]
+
+ *) Extend OCSP I/O functions so they can be used for simple general purpose
+ HTTP as well as OCSP. New wrapper function which can be used to download
+ CRLs using the OCSP API.
+ [Steve Henson]
+
+ *) Delegate command line handling in s_client/s_server to SSL_CONF APIs.
+ [Steve Henson]
+
+ *) SSL_CONF* functions. These provide a common framework for application
+ configuration using configuration files or command lines.
+ [Steve Henson]
+
+ *) SSL/TLS tracing code. This parses out SSL/TLS records using the
+ message callback and prints the results. Needs compile time option
+ "enable-ssl-trace". New options to s_client and s_server to enable
+ tracing.
+ [Steve Henson]
+
+ *) New ctrl and macro to retrieve supported points extensions.
+ Print out extension in s_server and s_client.
+ [Steve Henson]
+
+ *) New functions to retrieve certificate signature and signature
+ OID NID.
+ [Steve Henson]
+
+ *) Add functions to retrieve and manipulate the raw cipherlist sent by a
+ client to OpenSSL.
+ [Steve Henson]
+
+ *) New Suite B modes for TLS code. These use and enforce the requirements
+ of RFC6460: restrict ciphersuites, only permit Suite B algorithms and
+ only use Suite B curves. The Suite B modes can be set by using the
+ strings "SUITEB128", "SUITEB192" or "SUITEB128ONLY" for the cipherstring.
+ [Steve Henson]
+
+ *) New chain verification flags for Suite B levels of security. Check
+ algorithms are acceptable when flags are set in X509_verify_cert.
+ [Steve Henson]
+
+ *) Make tls1_check_chain return a set of flags indicating checks passed
+ by a certificate chain. Add additional tests to handle client
+ certificates: checks for matching certificate type and issuer name
+ comparison.
+ [Steve Henson]
+
+ *) If an attempt is made to use a signature algorithm not in the peer
+ preference list abort the handshake. If client has no suitable
+ signature algorithms in response to a certificate request do not
+ use the certificate.
+ [Steve Henson]
+
+ *) If server EC tmp key is not in client preference list abort handshake.
+ [Steve Henson]
+
+ *) Add support for certificate stores in CERT structure. This makes it
+ possible to have different stores per SSL structure or one store in
+ the parent SSL_CTX. Include distint stores for certificate chain
+ verification and chain building. New ctrl SSL_CTRL_BUILD_CERT_CHAIN
+ to build and store a certificate chain in CERT structure: returing
+ an error if the chain cannot be built: this will allow applications
+ to test if a chain is correctly configured.
+
+ Note: if the CERT based stores are not set then the parent SSL_CTX
+ store is used to retain compatibility with existing behaviour.
+
+ [Steve Henson]
+
+ *) New function ssl_set_client_disabled to set a ciphersuite disabled
+ mask based on the current session, check mask when sending client
+ hello and checking the requested ciphersuite.
+ [Steve Henson]
+
+ *) New ctrls to retrieve and set certificate types in a certificate
+ request message. Print out received values in s_client. If certificate
+ types is not set with custom values set sensible values based on
+ supported signature algorithms.
+ [Steve Henson]
+
+ *) Support for distinct client and server supported signature algorithms.
+ [Steve Henson]
+
+ *) Add certificate callback. If set this is called whenever a certificate
+ is required by client or server. An application can decide which
+ certificate chain to present based on arbitrary criteria: for example
+ supported signature algorithms. Add very simple example to s_server.
+ This fixes many of the problems and restrictions of the existing client
+ certificate callback: for example you can now clear an existing
+ certificate and specify the whole chain.
+ [Steve Henson]
+
+ *) Add new "valid_flags" field to CERT_PKEY structure which determines what
+ the certificate can be used for (if anything). Set valid_flags field
+ in new tls1_check_chain function. Simplify ssl_set_cert_masks which used
+ to have similar checks in it.
+
+ Add new "cert_flags" field to CERT structure and include a "strict mode".
+ This enforces some TLS certificate requirements (such as only permitting
+ certificate signature algorithms contained in the supported algorithms
+ extension) which some implementations ignore: this option should be used
+ with caution as it could cause interoperability issues.
+ [Steve Henson]
+
+ *) Update and tidy signature algorithm extension processing. Work out
+ shared signature algorithms based on preferences and peer algorithms
+ and print them out in s_client and s_server. Abort handshake if no
+ shared signature algorithms.
+ [Steve Henson]
+
+ *) Add new functions to allow customised supported signature algorithms
+ for SSL and SSL_CTX structures. Add options to s_client and s_server
+ to support them.
+ [Steve Henson]
+
+ *) New function SSL_certs_clear() to delete all references to certificates
+ from an SSL structure. Before this once a certificate had been added
+ it couldn't be removed.
+ [Steve Henson]
+
+ *) Integrate hostname, email address and IP address checking with certificate
+ verification. New verify options supporting checking in opensl utility.
+ [Steve Henson]
+
+ *) Fixes and wildcard matching support to hostname and email checking
+ functions. Add manual page.
+ [Florian Weimer (Red Hat Product Security Team)]
+
+ *) New functions to check a hostname email or IP address against a
+ certificate. Add options x509 utility to print results of checks against
+ a certificate.
+ [Steve Henson]
+
+ *) Fix OCSP checking.
+ [Rob Stradling <rob.stradling@comodo.com> and Ben Laurie]
+
+ *) Initial experimental support for explicitly trusted non-root CAs.
+ OpenSSL still tries to build a complete chain to a root but if an
+ intermediate CA has a trust setting included that is used. The first
+ setting is used: whether to trust (e.g., -addtrust option to the x509
+ utility) or reject.
+ [Steve Henson]
+
+ *) Add -trusted_first option which attempts to find certificates in the
+ trusted store even if an untrusted chain is also supplied.
+ [Steve Henson]
+
+ *) MIPS assembly pack updates: support for MIPS32r2 and SmartMIPS ASE,
+ platform support for Linux and Android.
+ [Andy Polyakov]
+
+ *) Support for linux-x32, ILP32 environment in x86_64 framework.
+ [Andy Polyakov]
+
+ *) Experimental multi-implementation support for FIPS capable OpenSSL.
+ When in FIPS mode the approved implementations are used as normal,
+ when not in FIPS mode the internal unapproved versions are used instead.
+ This means that the FIPS capable OpenSSL isn't forced to use the
+ (often lower performance) FIPS implementations outside FIPS mode.
+ [Steve Henson]
+
+ *) Transparently support X9.42 DH parameters when calling
+ PEM_read_bio_DHparameters. This means existing applications can handle
+ the new parameter format automatically.
+ [Steve Henson]
+
+ *) Initial experimental support for X9.42 DH parameter format: mainly
+ to support use of 'q' parameter for RFC5114 parameters.
+ [Steve Henson]
+
+ *) Add DH parameters from RFC5114 including test data to dhtest.
+ [Steve Henson]
+
+ *) Support for automatic EC temporary key parameter selection. If enabled
+ the most preferred EC parameters are automatically used instead of
+ hardcoded fixed parameters. Now a server just has to call:
+ SSL_CTX_set_ecdh_auto(ctx, 1) and the server will automatically
+ support ECDH and use the most appropriate parameters.
+ [Steve Henson]
+
+ *) Enhance and tidy EC curve and point format TLS extension code. Use
+ static structures instead of allocation if default values are used.
+ New ctrls to set curves we wish to support and to retrieve shared curves.
+ Print out shared curves in s_server. New options to s_server and s_client
+ to set list of supported curves.
+ [Steve Henson]
+
+ *) New ctrls to retrieve supported signature algorithms and
+ supported curve values as an array of NIDs. Extend openssl utility
+ to print out received values.
+ [Steve Henson]
+
+ *) Add new APIs EC_curve_nist2nid and EC_curve_nid2nist which convert
+ between NIDs and the more common NIST names such as "P-256". Enhance
+ ecparam utility and ECC method to recognise the NIST names for curves.
+ [Steve Henson]
+
+ *) Enhance SSL/TLS certificate chain handling to support different
+ chains for each certificate instead of one chain in the parent SSL_CTX.
+ [Steve Henson]
+
+ *) Support for fixed DH ciphersuite client authentication: where both
+ server and client use DH certificates with common parameters.
+ [Steve Henson]
+
+ *) Support for fixed DH ciphersuites: those requiring DH server
+ certificates.
+ [Steve Henson]
+
+ *) New function i2d_re_X509_tbs for re-encoding the TBS portion of
+ the certificate.
+ Note: Related 1.0.2-beta specific macros X509_get_cert_info,
+ X509_CINF_set_modified, X509_CINF_get_issuer, X509_CINF_get_extensions and
+ X509_CINF_get_signature were reverted post internal team review.
+
+ Changes between 1.0.1j and 1.0.1k [xx XXX xxxx]
+
+ *) Tighten handling of the ChangeCipherSpec (CCS) message: reject
+ early CCS messages during renegotiation. (Note that because
+ renegotiation is encrypted, this early CCS was not exploitable.)
+ [Emilia Käsper]
+
+ *) Tighten client-side session ticket handling during renegotiation:
+ ensure that the client only accepts a session ticket if the server sends
+ the extension anew in the ServerHello. Previously, a TLS client would
+ reuse the old extension state and thus accept a session ticket if one was
+ announced in the initial ServerHello.
+
+ Similarly, ensure that the client requires a session ticket if one
+ was advertised in the ServerHello. Previously, a TLS client would
+ ignore a missing NewSessionTicket message.
+ [Emilia Käsper]
+
+ Changes between 1.0.1i and 1.0.1j [15 Oct 2014]
+
+ *) SRTP Memory Leak.
+
+ A flaw in the DTLS SRTP extension parsing code allows an attacker, who
+ sends a carefully crafted handshake message, to cause OpenSSL to fail
+ to free up to 64k of memory causing a memory leak. This could be
+ exploited in a Denial Of Service attack. This issue affects OpenSSL
+ 1.0.1 server implementations for both SSL/TLS and DTLS regardless of
+ whether SRTP is used or configured. Implementations of OpenSSL that
+ have been compiled with OPENSSL_NO_SRTP defined are not affected.
+
+ The fix was developed by the OpenSSL team.
+ (CVE-2014-3513)
+ [OpenSSL team]
+
+ *) Session Ticket Memory Leak.
+
+ When an OpenSSL SSL/TLS/DTLS server receives a session ticket the
+ integrity of that ticket is first verified. In the event of a session
+ ticket integrity check failing, OpenSSL will fail to free memory
+ causing a memory leak. By sending a large number of invalid session
+ tickets an attacker could exploit this issue in a Denial Of Service
+ attack.
+ (CVE-2014-3567)
+ [Steve Henson]
+
+ *) Build option no-ssl3 is incomplete.
+
+ When OpenSSL is configured with "no-ssl3" as a build option, servers
+ could accept and complete a SSL 3.0 handshake, and clients could be
+ configured to send them.
+ (CVE-2014-3568)
+ [Akamai and the OpenSSL team]
+
+ *) Add support for TLS_FALLBACK_SCSV.
+ Client applications doing fallback retries should call
+ SSL_set_mode(s, SSL_MODE_SEND_FALLBACK_SCSV).
+ (CVE-2014-3566)
+ [Adam Langley, Bodo Moeller]
+
+ *) Add additional DigestInfo checks.
+
+ Reencode DigestInto in DER and check against the original when
+ verifying RSA signature: this will reject any improperly encoded
+ DigestInfo structures.
+
+ Note: this is a precautionary measure and no attacks are currently known.
+
+ [Steve Henson]
+
+ Changes between 1.0.1h and 1.0.1i [6 Aug 2014]
+
+ *) Fix SRP buffer overrun vulnerability. Invalid parameters passed to the
+ SRP code can be overrun an internal buffer. Add sanity check that
+ g, A, B < N to SRP code.
+
+ Thanks to Sean Devlin and Watson Ladd of Cryptography Services, NCC
+ Group for discovering this issue.
+ (CVE-2014-3512)
+ [Steve Henson]
+
+ *) A flaw in the OpenSSL SSL/TLS server code causes the server to negotiate
+ TLS 1.0 instead of higher protocol versions when the ClientHello message
+ is badly fragmented. This allows a man-in-the-middle attacker to force a
+ downgrade to TLS 1.0 even if both the server and the client support a
+ higher protocol version, by modifying the client's TLS records.
+
+ Thanks to David Benjamin and Adam Langley (Google) for discovering and
+ researching this issue.
+ (CVE-2014-3511)
+ [David Benjamin]
+
+ *) OpenSSL DTLS clients enabling anonymous (EC)DH ciphersuites are subject
+ to a denial of service attack. A malicious server can crash the client
+ with a null pointer dereference (read) by specifying an anonymous (EC)DH
+ ciphersuite and sending carefully crafted handshake messages.
+
+ Thanks to Felix Gröbert (Google) for discovering and researching this
+ issue.
+ (CVE-2014-3510)
+ [Emilia Käsper]
+
+ *) By sending carefully crafted DTLS packets an attacker could cause openssl
+ to leak memory. This can be exploited through a Denial of Service attack.
+ Thanks to Adam Langley for discovering and researching this issue.
+ (CVE-2014-3507)
+ [Adam Langley]
+
+ *) An attacker can force openssl to consume large amounts of memory whilst
+ processing DTLS handshake messages. This can be exploited through a
+ Denial of Service attack.
+ Thanks to Adam Langley for discovering and researching this issue.
+ (CVE-2014-3506)
+ [Adam Langley]
+
+ *) An attacker can force an error condition which causes openssl to crash
+ whilst processing DTLS packets due to memory being freed twice. This
+ can be exploited through a Denial of Service attack.
+ Thanks to Adam Langley and Wan-Teh Chang for discovering and researching
+ this issue.
+ (CVE-2014-3505)
+ [Adam Langley]
+
+ *) If a multithreaded client connects to a malicious server using a resumed
+ session and the server sends an ec point format extension it could write
+ up to 255 bytes to freed memory.
+
+ Thanks to Gabor Tyukasz (LogMeIn Inc) for discovering and researching this
+ issue.
+ (CVE-2014-3509)
+ [Gabor Tyukasz]
+
+ *) A malicious server can crash an OpenSSL client with a null pointer
+ dereference (read) by specifying an SRP ciphersuite even though it was not
+ properly negotiated with the client. This can be exploited through a
+ Denial of Service attack.
+
+ Thanks to Joonas Kuorilehto and Riku Hietamäki (Codenomicon) for
+ discovering and researching this issue.
+ (CVE-2014-5139)
+ [Steve Henson]
+
+ *) A flaw in OBJ_obj2txt may cause pretty printing functions such as
+ X509_name_oneline, X509_name_print_ex et al. to leak some information
+ from the stack. Applications may be affected if they echo pretty printing
+ output to the attacker.
+
+ Thanks to Ivan Fratric (Google) for discovering this issue.
+ (CVE-2014-3508)
+ [Emilia Käsper, and Steve Henson]
+
+ *) Fix ec_GFp_simple_points_make_affine (thus, EC_POINTs_mul etc.)
+ for corner cases. (Certain input points at infinity could lead to
+ bogus results, with non-infinity inputs mapped to infinity too.)
+ [Bodo Moeller]
+
+ Changes between 1.0.1g and 1.0.1h [5 Jun 2014]
+
+ *) Fix for SSL/TLS MITM flaw. An attacker using a carefully crafted
+ handshake can force the use of weak keying material in OpenSSL
+ SSL/TLS clients and servers.
+
+ Thanks to KIKUCHI Masashi (Lepidum Co. Ltd.) for discovering and
+ researching this issue. (CVE-2014-0224)
+ [KIKUCHI Masashi, Steve Henson]
+
+ *) Fix DTLS recursion flaw. By sending an invalid DTLS handshake to an
+ OpenSSL DTLS client the code can be made to recurse eventually crashing
+ in a DoS attack.
+
+ Thanks to Imre Rad (Search-Lab Ltd.) for discovering this issue.
+ (CVE-2014-0221)
+ [Imre Rad, Steve Henson]
+
+ *) Fix DTLS invalid fragment vulnerability. A buffer overrun attack can
+ be triggered by sending invalid DTLS fragments to an OpenSSL DTLS
+ client or server. This is potentially exploitable to run arbitrary
+ code on a vulnerable client or server.
+
+ Thanks to Jüri Aedla for reporting this issue. (CVE-2014-0195)
+ [Jüri Aedla, Steve Henson]
+
+ *) Fix bug in TLS code where clients enable anonymous ECDH ciphersuites
+ are subject to a denial of service attack.
+
+ Thanks to Felix Gröbert and Ivan Fratric at Google for discovering
+ this issue. (CVE-2014-3470)
+ [Felix Gröbert, Ivan Fratric, Steve Henson]
+
+ *) Harmonize version and its documentation. -f flag is used to display
+ compilation flags.
+ [mancha <mancha1@zoho.com>]
+
+ *) Fix eckey_priv_encode so it immediately returns an error upon a failure
+ in i2d_ECPrivateKey.
+ [mancha <mancha1@zoho.com>]
+
+ *) Fix some double frees. These are not thought to be exploitable.
+ [mancha <mancha1@zoho.com>]
+
+ Changes between 1.0.1f and 1.0.1g [7 Apr 2014]
+
+ *) A missing bounds check in the handling of the TLS heartbeat extension
+ can be used to reveal up to 64k of memory to a connected client or
+ server.
+
+ Thanks for Neel Mehta of Google Security for discovering this bug and to
+ Adam Langley <agl@chromium.org> and Bodo Moeller <bmoeller@acm.org> for
+ preparing the fix (CVE-2014-0160)
+ [Adam Langley, Bodo Moeller]
+
+ *) Fix for the attack described in the paper "Recovering OpenSSL
+ ECDSA Nonces Using the FLUSH+RELOAD Cache Side-channel Attack"
+ by Yuval Yarom and Naomi Benger. Details can be obtained from:
+ http://eprint.iacr.org/2014/140
+
+ Thanks to Yuval Yarom and Naomi Benger for discovering this
+ flaw and to Yuval Yarom for supplying a fix (CVE-2014-0076)
+ [Yuval Yarom and Naomi Benger]
+
+ *) TLS pad extension: draft-agl-tls-padding-03
+
+ Workaround for the "TLS hang bug" (see FAQ and PR#2771): if the
+ TLS client Hello record length value would otherwise be > 255 and
+ less that 512 pad with a dummy extension containing zeroes so it
+ is at least 512 bytes long.
+
+ [Adam Langley, Steve Henson]
+
+ Changes between 1.0.1e and 1.0.1f [6 Jan 2014]
+
+ *) Fix for TLS record tampering bug. A carefully crafted invalid
+ handshake could crash OpenSSL with a NULL pointer exception.
+ Thanks to Anton Johansson for reporting this issues.
+ (CVE-2013-4353)
+
+ *) Keep original DTLS digest and encryption contexts in retransmission
+ structures so we can use the previous session parameters if they need
+ to be resent. (CVE-2013-6450)
+ [Steve Henson]
+
+ *) Add option SSL_OP_SAFARI_ECDHE_ECDSA_BUG (part of SSL_OP_ALL) which
+ avoids preferring ECDHE-ECDSA ciphers when the client appears to be
+ Safari on OS X. Safari on OS X 10.8..10.8.3 advertises support for
+ several ECDHE-ECDSA ciphers, but fails to negotiate them. The bug
+ is fixed in OS X 10.8.4, but Apple have ruled out both hot fixing
+ 10.8..10.8.3 and forcing users to upgrade to 10.8.4 or newer.
+ [Rob Stradling, Adam Langley]
+
+ Changes between 1.0.1d and 1.0.1e [11 Feb 2013]
+
+ *) Correct fix for CVE-2013-0169. The original didn't work on AES-NI
+ supporting platforms or when small records were transferred.
+ [Andy Polyakov, Steve Henson]
+
+ Changes between 1.0.1c and 1.0.1d [5 Feb 2013]
+
+ *) Make the decoding of SSLv3, TLS and DTLS CBC records constant time.
+
+ This addresses the flaw in CBC record processing discovered by
+ Nadhem Alfardan and Kenny Paterson. Details of this attack can be found
+ at: http://www.isg.rhul.ac.uk/tls/
+
+ Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
+ Security Group at Royal Holloway, University of London
+ (www.isg.rhul.ac.uk) for discovering this flaw and Adam Langley and
+ Emilia Käsper for the initial patch.
+ (CVE-2013-0169)
+ [Emilia Käsper, Adam Langley, Ben Laurie, Andy Polyakov, Steve Henson]
+
+ *) Fix flaw in AESNI handling of TLS 1.2 and 1.1 records for CBC mode
+ ciphersuites which can be exploited in a denial of service attack.
+ Thanks go to and to Adam Langley <agl@chromium.org> for discovering
+ and detecting this bug and to Wolfgang Ettlinger
+ <wolfgang.ettlinger@gmail.com> for independently discovering this issue.
+ (CVE-2012-2686)
+ [Adam Langley]
+
+ *) Return an error when checking OCSP signatures when key is NULL.
+ This fixes a DoS attack. (CVE-2013-0166)
[Steve Henson]
- *) Add experimental option FIPSSYMS to give all symbols in
- fipscanister.o and FIPS or fips prefix. This will avoid
- conflicts with future versions of OpenSSL. Add perl script
- util/fipsas.pl to preprocess assembly language source files
- and rename any affected symbols.
+ *) Make openssl verify return errors.
+ [Chris Palmer <palmer@google.com> and Ben Laurie]
+
+ *) Call OCSP Stapling callback after ciphersuite has been chosen, so
+ the right response is stapled. Also change SSL_get_certificate()
+ so it returns the certificate actually sent.
+ See http://rt.openssl.org/Ticket/Display.html?id=2836.
+ [Rob Stradling <rob.stradling@comodo.com>]
+
+ *) Fix possible deadlock when decoding public keys.
[Steve Henson]
- *) Add selftest checks and algorithm block of non-fips algorithms in
- FIPS mode. Remove DES2 from selftests.
+ *) Don't use TLS 1.0 record version number in initial client hello
+ if renegotiating.
[Steve Henson]
- *) Add ECDSA code to fips module. Add tiny fips_ecdsa_check to just
- return internal method without any ENGINE dependencies. Add new
- tiny fips sign and verify functions.
+ Changes between 1.0.1b and 1.0.1c [10 May 2012]
+
+ *) Sanity check record length before skipping explicit IV in TLS
+ 1.2, 1.1 and DTLS to fix DoS attack.
+
+ Thanks to Codenomicon for discovering this issue using Fuzz-o-Matic
+ fuzzing as a service testing platform.
+ (CVE-2012-2333)
[Steve Henson]
- *) New build option no-ec2m to disable characteristic 2 code.
+ *) Initialise tkeylen properly when encrypting CMS messages.
+ Thanks to Solar Designer of Openwall for reporting this issue.
[Steve Henson]
- *) New build option "fipscanisteronly". This only builds fipscanister.o
- and (currently) associated fips utilities. Uses the file Makefile.fips
- instead of Makefile.org as the prototype.
+ *) In FIPS mode don't try to use composite ciphers as they are not
+ approved.
[Steve Henson]
- *) Add some FIPS mode restrictions to GCM. Add internal IV generator.
- Update fips_gcmtest to use IV generator.
+ Changes between 1.0.1a and 1.0.1b [26 Apr 2012]
+
+ *) OpenSSL 1.0.0 sets SSL_OP_ALL to 0x80000FFFL and OpenSSL 1.0.1 and
+ 1.0.1a set SSL_OP_NO_TLSv1_1 to 0x00000400L which would unfortunately
+ mean any application compiled against OpenSSL 1.0.0 headers setting
+ SSL_OP_ALL would also set SSL_OP_NO_TLSv1_1, unintentionally disablng
+ TLS 1.1 also. Fix this by changing the value of SSL_OP_NO_TLSv1_1 to
+ 0x10000000L Any application which was previously compiled against
+ OpenSSL 1.0.1 or 1.0.1a headers and which cares about SSL_OP_NO_TLSv1_1
+ will need to be recompiled as a result. Letting be results in
+ inability to disable specifically TLS 1.1 and in client context,
+ in unlike event, limit maximum offered version to TLS 1.0 [see below].
[Steve Henson]
- *) Initial, experimental EVP support for AES-GCM. AAD can be input by
- setting output buffer to NULL. The *Final function must be
- called although it will not retrieve any additional data. The tag
- can be set or retrieved with a ctrl. The IV length is by default 12
- bytes (96 bits) but can be set to an alternative value. If the IV
- length exceeds the maximum IV length (currently 16 bytes) it cannot be
- set before the key.
+ *) In order to ensure interoperabilty SSL_OP_NO_protocolX does not
+ disable just protocol X, but all protocols above X *if* there are
+ protocols *below* X still enabled. In more practical terms it means
+ that if application wants to disable TLS1.0 in favor of TLS1.1 and
+ above, it's not sufficient to pass SSL_OP_NO_TLSv1, one has to pass
+ SSL_OP_NO_TLSv1|SSL_OP_NO_SSLv3|SSL_OP_NO_SSLv2. This applies to
+ client side.
+ [Andy Polyakov]
+
+ Changes between 1.0.1 and 1.0.1a [19 Apr 2012]
+
+ *) Check for potentially exploitable overflows in asn1_d2i_read_bio
+ BUF_mem_grow and BUF_mem_grow_clean. Refuse attempts to shrink buffer
+ in CRYPTO_realloc_clean.
+
+ Thanks to Tavis Ormandy, Google Security Team, for discovering this
+ issue and to Adam Langley <agl@chromium.org> for fixing it.
+ (CVE-2012-2110)
+ [Adam Langley (Google), Tavis Ormandy, Google Security Team]
+
+ *) Don't allow TLS 1.2 SHA-256 ciphersuites in TLS 1.0, 1.1 connections.
+ [Adam Langley]
+
+ *) Workarounds for some broken servers that "hang" if a client hello
+ record length exceeds 255 bytes.
+
+ 1. Do not use record version number > TLS 1.0 in initial client
+ hello: some (but not all) hanging servers will now work.
+ 2. If we set OPENSSL_MAX_TLS1_2_CIPHER_LENGTH this will truncate
+ the number of ciphers sent in the client hello. This should be
+ set to an even number, such as 50, for example by passing:
+ -DOPENSSL_MAX_TLS1_2_CIPHER_LENGTH=50 to config or Configure.
+ Most broken servers should now work.
+ 3. If all else fails setting OPENSSL_NO_TLS1_2_CLIENT will disable
+ TLS 1.2 client support entirely.
[Steve Henson]
- *) New flag in ciphers: EVP_CIPH_FLAG_CUSTOM_CIPHER. This means the
- underlying do_cipher function handles all cipher semantics itself
- including padding and finalisation. This is useful if (for example)
- an ENGINE cipher handles block padding itself. The behaviour of
- do_cipher is subtly changed if this flag is set: the return value
- is the number of characters written to the output buffer (zero is
- no longer an error code) or a negative error code. Also if the
- input buffer is NULL and length 0 finalisation should be performed.
+ *) Fix SEGV in Vector Permutation AES module observed in OpenSSH.
+ [Andy Polyakov]
+
+ Changes between 1.0.0h and 1.0.1 [14 Mar 2012]
+
+ *) Add compatibility with old MDC2 signatures which use an ASN1 OCTET
+ STRING form instead of a DigestInfo.
[Steve Henson]
- *) If a candidate issuer certificate is already part of the constructed
- path ignore it: new debug notification X509_V_ERR_PATH_LOOP for this case.
+ *) The format used for MDC2 RSA signatures is inconsistent between EVP
+ and the RSA_sign/RSA_verify functions. This was made more apparent when
+ OpenSSL used RSA_sign/RSA_verify for some RSA signatures in particular
+ those which went through EVP_PKEY_METHOD in 1.0.0 and later. Detect
+ the correct format in RSA_verify so both forms transparently work.
[Steve Henson]
- *) Improve forward-security support: add functions
+ *) Some servers which support TLS 1.0 can choke if we initially indicate
+ support for TLS 1.2 and later renegotiate using TLS 1.0 in the RSA
+ encrypted premaster secret. As a workaround use the maximum permitted
+ client version in client hello, this should keep such servers happy
+ and still work with previous versions of OpenSSL.
+ [Steve Henson]
- void SSL_CTX_set_not_resumable_session_callback(SSL_CTX *ctx, int (*cb)(SSL *ssl, int is_forward_secure))
- void SSL_set_not_resumable_session_callback(SSL *ssl, int (*cb)(SSL *ssl, int is_forward_secure))
+ *) Add support for TLS/DTLS heartbeats.
+ [Robin Seggelmann <seggelmann@fh-muenster.de>]
- for use by SSL/TLS servers; the callback function will be called whenever a
- new session is created, and gets to decide whether the session may be
- cached to make it resumable (return 0) or not (return 1). (As by the
- SSL/TLS protocol specifications, the session_id sent by the server will be
- empty to indicate that the session is not resumable; also, the server will
- not generate RFC 4507 (RFC 5077) session tickets.)
+ *) Add support for SCTP.
+ [Robin Seggelmann <seggelmann@fh-muenster.de>]
- A simple reasonable callback implementation is to return is_forward_secure.
- This parameter will be set to 1 or 0 depending on the ciphersuite selected
- by the SSL/TLS server library, indicating whether it can provide forward
- security.
- [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
+ *) Improved PRNG seeding for VOS.
+ [Paul Green <Paul.Green@stratus.com>]
+
+ *) Extensive assembler packs updates, most notably:
+
+ - x86[_64]: AES-NI, PCLMULQDQ, RDRAND support;
+ - x86[_64]: SSSE3 support (SHA1, vector-permutation AES);
+ - x86_64: bit-sliced AES implementation;
+ - ARM: NEON support, contemporary platforms optimizations;
+ - s390x: z196 support;
+ - *: GHASH and GF(2^m) multiplication implementations;
+
+ [Andy Polyakov]
+
+ *) Make TLS-SRP code conformant with RFC 5054 API cleanup
+ (removal of unnecessary code)
+ [Peter Sylvester <peter.sylvester@edelweb.fr>]
+
+ *) Add TLS key material exporter from RFC 5705.
+ [Eric Rescorla]
+
+ *) Add DTLS-SRTP negotiation from RFC 5764.
+ [Eric Rescorla]
*) Add Next Protocol Negotiation,
http://tools.ietf.org/html/draft-agl-tls-nextprotoneg-00. Can be
by Google.
[Adam Langley <agl@google.com> and Ben Laurie]
+ *) Add optional 64-bit optimized implementations of elliptic curves NIST-P224,
+ NIST-P256, NIST-P521, with constant-time single point multiplication on
+ typical inputs. Compiler support for the nonstandard type __uint128_t is
+ required to use this (present in gcc 4.4 and later, for 64-bit builds).
+ Code made available under Apache License version 2.0.
+
+ Specify "enable-ec_nistp_64_gcc_128" on the Configure (or config) command
+ line to include this in your build of OpenSSL, and run "make depend" (or
+ "make update"). This enables the following EC_METHODs:
+
+ EC_GFp_nistp224_method()
+ EC_GFp_nistp256_method()
+ EC_GFp_nistp521_method()
+
+ EC_GROUP_new_by_curve_name() will automatically use these (while
+ EC_GROUP_new_curve_GFp() currently prefers the more flexible
+ implementations).
+ [Emilia Käsper, Adam Langley, Bodo Moeller (Google)]
+
*) Use type ossl_ssize_t instad of ssize_t which isn't available on
all platforms. Move ssize_t definition from e_os.h to the public
header file e_os2.h as it now appears in public header file cms.h
[Steve Henson]
- *) New function OPENSSL_gmtime_diff to find the difference in days
- and seconds between two tm structures. This will be used to provide
- additional functionality for ASN1_TIME.
- [Steve Henson]
-
*) New -sigopt option to the ca, req and x509 utilities. Additional
signature parameters can be passed using this option and in
particular PSS.
parameters r, s.
[Steve Henson]
- *) Add -trusted_first option which attempts to find certificates in the
- trusted store even if an untrusted chain is also supplied.
+ *) Password based recipient info support for CMS library: implementing
+ RFC3211.
[Steve Henson]
- *) Initial experimental support for explicitly trusted non-root CAs.
- OpenSSL still tries to build a complete chain to a root but if an
- intermediate CA has a trust setting included that is used. The first
- setting is used: whether to trust or reject.
+ *) Split password based encryption into PBES2 and PBKDF2 functions. This
+ neatly separates the code into cipher and PBE sections and is required
+ for some algorithms that split PBES2 into separate pieces (such as
+ password based CMS).
[Steve Henson]
- *) New -verify_name option in command line utilities to set verification
- parameters by name.
+ *) Session-handling fixes:
+ - Fix handling of connections that are resuming with a session ID,
+ but also support Session Tickets.
+ - Fix a bug that suppressed issuing of a new ticket if the client
+ presented a ticket with an expired session.
+ - Try to set the ticket lifetime hint to something reasonable.
+ - Make tickets shorter by excluding irrelevant information.
+ - On the client side, don't ignore renewed tickets.
+ [Adam Langley, Bodo Moeller (Google)]
+
+ *) Fix PSK session representation.
+ [Bodo Moeller]
+
+ *) Add RC4-MD5 and AESNI-SHA1 "stitched" implementations.
+
+ This work was sponsored by Intel.
+ [Andy Polyakov]
+
+ *) Add GCM support to TLS library. Some custom code is needed to split
+ the IV between the fixed (from PRF) and explicit (from TLS record)
+ portions. This adds all GCM ciphersuites supported by RFC5288 and
+ RFC5289. Generalise some AES* cipherstrings to include GCM and
+ add a special AESGCM string for GCM only.
[Steve Henson]
- *) Initial CMAC implementation. WARNING: EXPERIMENTAL, API MAY CHANGE.
- Add CMAC pkey methods.
+ *) Expand range of ctrls for AES GCM. Permit setting invocation
+ field on decrypt and retrieval of invocation field only on encrypt.
[Steve Henson]
- *) Experiemental regnegotiation in s_server -www mode. If the client
- browses /reneg connection is renegotiated. If /renegcert it is
- renegotiated requesting a certificate.
+ *) Add HMAC ECC ciphersuites from RFC5289. Include SHA384 PRF support.
+ As required by RFC5289 these ciphersuites cannot be used if for
+ versions of TLS earlier than 1.2.
[Steve Henson]
- *) Add an "external" session cache for debugging purposes to s_server. This
- should help trace issues which normally are only apparent in deployed
- multi-process servers.
+ *) For FIPS capable OpenSSL interpret a NULL default public key method
+ as unset and return the appropriate default but do *not* set the default.
+ This means we can return the appropriate method in applications that
+ switch between FIPS and non-FIPS modes.
[Steve Henson]
- *) Experiemental password based recipient info support for CMS library:
- implementing RFC3211.
+ *) Redirect HMAC and CMAC operations to FIPS module in FIPS mode. If an
+ ENGINE is used then we cannot handle that in the FIPS module so we
+ keep original code iff non-FIPS operations are allowed.
[Steve Henson]
- *) Split password based encryption into PBES2 and PBKDF2 functions. This
- neatly separates the code into cipher and PBE sections and is required
- for some algorithms that split PBES2 into separate pieces (such as
- password based CMS).
+ *) Add -attime option to openssl utilities.
+ [Peter Eckersley <pde@eff.org>, Ben Laurie and Steve Henson]
+
+ *) Redirect DSA and DH operations to FIPS module in FIPS mode.
[Steve Henson]
- *) Extensive audit of libcrypto with DEBUG_UNUSED. Fix many cases where
- return value is ignored. NB. The functions RAND_add(), RAND_seed(),
- BIO_set_cipher() and some obscure PEM functions were changed so they
- can now return an error. The RAND changes required a change to the
- RAND_METHOD structure.
+ *) Redirect ECDSA and ECDH operations to FIPS module in FIPS mode. Also use
+ FIPS EC methods unconditionally for now.
[Steve Henson]
- *) New macro __owur for "OpenSSL Warn Unused Result". This makes use of
- a gcc attribute to warn if the result of a function is ignored. This
- is enable if DEBUG_UNUSED is set. Add to several functions in evp.h
- whose return value is often ignored.
+ *) New build option no-ec2m to disable characteristic 2 code.
[Steve Henson]
-
- Changes between 1.0.0d and 1.0.1 [xx XXX xxxx]
- *) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
+ *) Backport libcrypto audit of return value checking from 1.1.0-dev; not
+ all cases can be covered as some introduce binary incompatibilities.
[Steve Henson]
- *) Add EC_GFp_nistp224_method(), a 64-bit optimized implementation for
- elliptic curve NIST-P224 with constant-time single point multiplication on
- typical inputs. EC_GROUP_new_by_curve_name() will automatically use this
- (while EC_GROUP_new_curve_GFp() currently won't and prefers the more
- flexible implementations).
+ *) Redirect RSA operations to FIPS module including keygen,
+ encrypt, decrypt, sign and verify. Block use of non FIPS RSA methods.
+ [Steve Henson]
- The implementation requires support for the nonstandard type __uint128_t,
- and so is disabled by default. To include this in your build of OpenSSL,
- use -DEC_NISTP224_64_GCC_128 on the Configure (or config) command line,
- and run "make depend" (or "make update").
- [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
+ *) Add similar low level API blocking to ciphers.
+ [Steve Henson]
+
+ *) Low level digest APIs are not approved in FIPS mode: any attempt
+ to use these will cause a fatal error. Applications that *really* want
+ to use them can use the private_* version instead.
+ [Steve Henson]
+
+ *) Redirect cipher operations to FIPS module for FIPS builds.
+ [Steve Henson]
+
+ *) Redirect digest operations to FIPS module for FIPS builds.
+ [Steve Henson]
+
+ *) Update build system to add "fips" flag which will link in fipscanister.o
+ for static and shared library builds embedding a signature if needed.
+ [Steve Henson]
+
+ *) Output TLS supported curves in preference order instead of numerical
+ order. This is currently hardcoded for the highest order curves first.
+ This should be configurable so applications can judge speed vs strength.
+ [Steve Henson]
+
+ *) Add TLS v1.2 server support for client authentication.
+ [Steve Henson]
+
+ *) Add support for FIPS mode in ssl library: disable SSLv3, non-FIPS ciphers
+ and enable MD5.
+ [Steve Henson]
+
+ *) Functions FIPS_mode_set() and FIPS_mode() which call the underlying
+ FIPS modules versions.
+ [Steve Henson]
+
+ *) Add TLS v1.2 client side support for client authentication. Keep cache
+ of handshake records longer as we don't know the hash algorithm to use
+ until after the certificate request message is received.
+ [Steve Henson]
+
+ *) Initial TLS v1.2 client support. Add a default signature algorithms
+ extension including all the algorithms we support. Parse new signature
+ format in client key exchange. Relax some ECC signing restrictions for
+ TLS v1.2 as indicated in RFC5246.
+ [Steve Henson]
+
+ *) Add server support for TLS v1.2 signature algorithms extension. Switch
+ to new signature format when needed using client digest preference.
+ All server ciphersuites should now work correctly in TLS v1.2. No client
+ support yet and no support for client certificates.
+ [Steve Henson]
+
+ *) Initial TLS v1.2 support. Add new SHA256 digest to ssl code, switch
+ to SHA256 for PRF when using TLS v1.2 and later. Add new SHA256 based
+ ciphersuites. At present only RSA key exchange ciphersuites work with
+ TLS v1.2. Add new option for TLS v1.2 replacing the old and obsolete
+ SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
+ and version checking.
+ [Steve Henson]
+
+ *) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
+ with this defined it will not be affected by any changes to ssl internal
+ structures. Add several utility functions to allow openssl application
+ to work with OPENSSL_NO_SSL_INTERN defined.
+ [Steve Henson]
+
+ *) Add SRP support.
+ [Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
+
+ *) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
+ [Steve Henson]
*) Permit abbreviated handshakes when renegotiating using the function
SSL_renegotiate_abbreviated().
Add command line options to s_client/s_server.
[Steve Henson]
+ Changes between 1.0.0j and 1.0.0k [5 Feb 2013]
+
+ *) Make the decoding of SSLv3, TLS and DTLS CBC records constant time.
+
+ This addresses the flaw in CBC record processing discovered by
+ Nadhem Alfardan and Kenny Paterson. Details of this attack can be found
+ at: http://www.isg.rhul.ac.uk/tls/
+
+ Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
+ Security Group at Royal Holloway, University of London
+ (www.isg.rhul.ac.uk) for discovering this flaw and Adam Langley and
+ Emilia Käsper for the initial patch.
+ (CVE-2013-0169)
+ [Emilia Käsper, Adam Langley, Ben Laurie, Andy Polyakov, Steve Henson]
+
+ *) Return an error when checking OCSP signatures when key is NULL.
+ This fixes a DoS attack. (CVE-2013-0166)
+ [Steve Henson]
+
+ *) Call OCSP Stapling callback after ciphersuite has been chosen, so
+ the right response is stapled. Also change SSL_get_certificate()
+ so it returns the certificate actually sent.
+ See http://rt.openssl.org/Ticket/Display.html?id=2836.
+ (This is a backport)
+ [Rob Stradling <rob.stradling@comodo.com>]
+
+ *) Fix possible deadlock when decoding public keys.
+ [Steve Henson]
+
+ Changes between 1.0.0i and 1.0.0j [10 May 2012]
+
+ [NB: OpenSSL 1.0.0i and later 1.0.0 patch levels were released after
+ OpenSSL 1.0.1.]
+
+ *) Sanity check record length before skipping explicit IV in DTLS
+ to fix DoS attack.
+
+ Thanks to Codenomicon for discovering this issue using Fuzz-o-Matic
+ fuzzing as a service testing platform.
+ (CVE-2012-2333)
+ [Steve Henson]
+
+ *) Initialise tkeylen properly when encrypting CMS messages.
+ Thanks to Solar Designer of Openwall for reporting this issue.
+ [Steve Henson]
+
+ Changes between 1.0.0h and 1.0.0i [19 Apr 2012]
+
+ *) Check for potentially exploitable overflows in asn1_d2i_read_bio
+ BUF_mem_grow and BUF_mem_grow_clean. Refuse attempts to shrink buffer
+ in CRYPTO_realloc_clean.
+
+ Thanks to Tavis Ormandy, Google Security Team, for discovering this
+ issue and to Adam Langley <agl@chromium.org> for fixing it.
+ (CVE-2012-2110)
+ [Adam Langley (Google), Tavis Ormandy, Google Security Team]
+
+ Changes between 1.0.0g and 1.0.0h [12 Mar 2012]
+
+ *) Fix MMA (Bleichenbacher's attack on PKCS #1 v1.5 RSA padding) weakness
+ in CMS and PKCS7 code. When RSA decryption fails use a random key for
+ content decryption and always return the same error. Note: this attack
+ needs on average 2^20 messages so it only affects automated senders. The
+ old behaviour can be reenabled in the CMS code by setting the
+ CMS_DEBUG_DECRYPT flag: this is useful for debugging and testing where
+ an MMA defence is not necessary.
+ Thanks to Ivan Nestlerode <inestlerode@us.ibm.com> for discovering
+ this issue. (CVE-2012-0884)
+ [Steve Henson]
+
+ *) Fix CVE-2011-4619: make sure we really are receiving a
+ client hello before rejecting multiple SGC restarts. Thanks to
+ Ivan Nestlerode <inestlerode@us.ibm.com> for discovering this bug.
+ [Steve Henson]
+
+ Changes between 1.0.0f and 1.0.0g [18 Jan 2012]
+
+ *) Fix for DTLS DoS issue introduced by fix for CVE-2011-4109.
+ Thanks to Antonio Martin, Enterprise Secure Access Research and
+ Development, Cisco Systems, Inc. for discovering this bug and
+ preparing a fix. (CVE-2012-0050)
+ [Antonio Martin]
+
+ Changes between 1.0.0e and 1.0.0f [4 Jan 2012]
+
+ *) Nadhem Alfardan and Kenny Paterson have discovered an extension
+ of the Vaudenay padding oracle attack on CBC mode encryption
+ which enables an efficient plaintext recovery attack against
+ the OpenSSL implementation of DTLS. Their attack exploits timing
+ differences arising during decryption processing. A research
+ paper describing this attack can be found at:
+ http://www.isg.rhul.ac.uk/~kp/dtls.pdf
+ Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
+ Security Group at Royal Holloway, University of London
+ (www.isg.rhul.ac.uk) for discovering this flaw and to Robin Seggelmann
+ <seggelmann@fh-muenster.de> and Michael Tuexen <tuexen@fh-muenster.de>
+ for preparing the fix. (CVE-2011-4108)
+ [Robin Seggelmann, Michael Tuexen]
+
+ *) Clear bytes used for block padding of SSL 3.0 records.
+ (CVE-2011-4576)
+ [Adam Langley (Google)]
+
+ *) Only allow one SGC handshake restart for SSL/TLS. Thanks to George
+ Kadianakis <desnacked@gmail.com> for discovering this issue and
+ Adam Langley for preparing the fix. (CVE-2011-4619)
+ [Adam Langley (Google)]
+
+ *) Check parameters are not NULL in GOST ENGINE. (CVE-2012-0027)
+ [Andrey Kulikov <amdeich@gmail.com>]
+
+ *) Prevent malformed RFC3779 data triggering an assertion failure.
+ Thanks to Andrew Chi, BBN Technologies, for discovering the flaw
+ and Rob Austein <sra@hactrn.net> for fixing it. (CVE-2011-4577)
+ [Rob Austein <sra@hactrn.net>]
+
+ *) Improved PRNG seeding for VOS.
+ [Paul Green <Paul.Green@stratus.com>]
+
+ *) Fix ssl_ciph.c set-up race.
+ [Adam Langley (Google)]
+
+ *) Fix spurious failures in ecdsatest.c.
+ [Emilia Käsper (Google)]
+
+ *) Fix the BIO_f_buffer() implementation (which was mixing different
+ interpretations of the '..._len' fields).
+ [Adam Langley (Google)]
+
+ *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
+ BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
+ threads won't reuse the same blinding coefficients.
+
+ This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
+ lock to call BN_BLINDING_invert_ex, and avoids one use of
+ BN_BLINDING_update for each BN_BLINDING structure (previously,
+ the last update always remained unused).
+ [Emilia Käsper (Google)]
+
+ *) In ssl3_clear, preserve s3->init_extra along with s3->rbuf.
+ [Bob Buckholz (Google)]
+
+ Changes between 1.0.0d and 1.0.0e [6 Sep 2011]
+
+ *) Fix bug where CRLs with nextUpdate in the past are sometimes accepted
+ by initialising X509_STORE_CTX properly. (CVE-2011-3207)
+ [Kaspar Brand <ossl@velox.ch>]
+
+ *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
+ for multi-threaded use of ECDH. (CVE-2011-3210)
+ [Adam Langley (Google)]
+
+ *) Fix x509_name_ex_d2i memory leak on bad inputs.
+ [Bodo Moeller]
+
+ *) Remove hard coded ecdsaWithSHA1 signature tests in ssl code and check
+ signature public key algorithm by using OID xref utilities instead.
+ Before this you could only use some ECC ciphersuites with SHA1 only.
+ [Steve Henson]
+
+ *) Add protection against ECDSA timing attacks as mentioned in the paper
+ by Billy Bob Brumley and Nicola Tuveri, see:
+
+ http://eprint.iacr.org/2011/232.pdf
+
+ [Billy Bob Brumley and Nicola Tuveri]
+
Changes between 1.0.0c and 1.0.0d [8 Feb 2011]
*) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
*) Add a ctrl to asn1 method to allow a public key algorithm to express
a default digest type to use. In most cases this will be SHA1 but some
algorithms (such as GOST) need to specify an alternative digest. The
- return value indicates how strong the prefernce is 1 means optional and
+ return value indicates how strong the preference is 1 means optional and
2 is mandatory (that is it is the only supported type). Modify
ASN1_item_sign() to accept a NULL digest argument to indicate it should
use the default md. Update openssl utilities to use the default digest
manual pages.
[Oliver Tappe <zooey@hirschkaefer.de>]
- *) New utility "genpkey" this is analagous to "genrsa" etc except it can
+ *) New utility "genpkey" this is analogous to "genrsa" etc except it can
generate keys for any algorithm. Extend and update EVP_PKEY_METHOD to
support key and parameter generation and add initial key generation
functionality for RSA.
'-key2 ...', '-servername_fatal' (subject to change). This allows
testing the HostName extension for a specific single host name ('-cert'
and '-key' remain fallbacks for handshakes without HostName
- negotiation). If the unrecogninzed_name alert has to be sent, this by
+ negotiation). If the unrecognized_name alert has to be sent, this by
default is a warning; it becomes fatal with the '-servername_fatal'
option.
*) Change 'Configure' script to enable Camellia by default.
[NTT]
-
+
+ Changes between 0.9.8x and 0.9.8y [5 Feb 2013]
+
+ *) Make the decoding of SSLv3, TLS and DTLS CBC records constant time.
+
+ This addresses the flaw in CBC record processing discovered by
+ Nadhem Alfardan and Kenny Paterson. Details of this attack can be found
+ at: http://www.isg.rhul.ac.uk/tls/
+
+ Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
+ Security Group at Royal Holloway, University of London
+ (www.isg.rhul.ac.uk) for discovering this flaw and Adam Langley and
+ Emilia Käsper for the initial patch.
+ (CVE-2013-0169)
+ [Emilia Käsper, Adam Langley, Ben Laurie, Andy Polyakov, Steve Henson]
+
+ *) Return an error when checking OCSP signatures when key is NULL.
+ This fixes a DoS attack. (CVE-2013-0166)
+ [Steve Henson]
+
+ *) Call OCSP Stapling callback after ciphersuite has been chosen, so
+ the right response is stapled. Also change SSL_get_certificate()
+ so it returns the certificate actually sent.
+ See http://rt.openssl.org/Ticket/Display.html?id=2836.
+ (This is a backport)
+ [Rob Stradling <rob.stradling@comodo.com>]
+
+ *) Fix possible deadlock when decoding public keys.
+ [Steve Henson]
+
+ Changes between 0.9.8w and 0.9.8x [10 May 2012]
+
+ *) Sanity check record length before skipping explicit IV in DTLS
+ to fix DoS attack.
+
+ Thanks to Codenomicon for discovering this issue using Fuzz-o-Matic
+ fuzzing as a service testing platform.
+ (CVE-2012-2333)
+ [Steve Henson]
+
+ *) Initialise tkeylen properly when encrypting CMS messages.
+ Thanks to Solar Designer of Openwall for reporting this issue.
+ [Steve Henson]
+
+ Changes between 0.9.8v and 0.9.8w [23 Apr 2012]
+
+ *) The fix for CVE-2012-2110 did not take into account that the
+ 'len' argument to BUF_MEM_grow and BUF_MEM_grow_clean is an
+ int in OpenSSL 0.9.8, making it still vulnerable. Fix by
+ rejecting negative len parameter. (CVE-2012-2131)
+ [Tomas Hoger <thoger@redhat.com>]
+
+ Changes between 0.9.8u and 0.9.8v [19 Apr 2012]
+
+ *) Check for potentially exploitable overflows in asn1_d2i_read_bio
+ BUF_mem_grow and BUF_mem_grow_clean. Refuse attempts to shrink buffer
+ in CRYPTO_realloc_clean.
+
+ Thanks to Tavis Ormandy, Google Security Team, for discovering this
+ issue and to Adam Langley <agl@chromium.org> for fixing it.
+ (CVE-2012-2110)
+ [Adam Langley (Google), Tavis Ormandy, Google Security Team]
+
+ Changes between 0.9.8t and 0.9.8u [12 Mar 2012]
+
+ *) Fix MMA (Bleichenbacher's attack on PKCS #1 v1.5 RSA padding) weakness
+ in CMS and PKCS7 code. When RSA decryption fails use a random key for
+ content decryption and always return the same error. Note: this attack
+ needs on average 2^20 messages so it only affects automated senders. The
+ old behaviour can be reenabled in the CMS code by setting the
+ CMS_DEBUG_DECRYPT flag: this is useful for debugging and testing where
+ an MMA defence is not necessary.
+ Thanks to Ivan Nestlerode <inestlerode@us.ibm.com> for discovering
+ this issue. (CVE-2012-0884)
+ [Steve Henson]
+
+ *) Fix CVE-2011-4619: make sure we really are receiving a
+ client hello before rejecting multiple SGC restarts. Thanks to
+ Ivan Nestlerode <inestlerode@us.ibm.com> for discovering this bug.
+ [Steve Henson]
+
+ Changes between 0.9.8s and 0.9.8t [18 Jan 2012]
+
+ *) Fix for DTLS DoS issue introduced by fix for CVE-2011-4109.
+ Thanks to Antonio Martin, Enterprise Secure Access Research and
+ Development, Cisco Systems, Inc. for discovering this bug and
+ preparing a fix. (CVE-2012-0050)
+ [Antonio Martin]
+
+ Changes between 0.9.8r and 0.9.8s [4 Jan 2012]
+
+ *) Nadhem Alfardan and Kenny Paterson have discovered an extension
+ of the Vaudenay padding oracle attack on CBC mode encryption
+ which enables an efficient plaintext recovery attack against
+ the OpenSSL implementation of DTLS. Their attack exploits timing
+ differences arising during decryption processing. A research
+ paper describing this attack can be found at:
+ http://www.isg.rhul.ac.uk/~kp/dtls.pdf
+ Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
+ Security Group at Royal Holloway, University of London
+ (www.isg.rhul.ac.uk) for discovering this flaw and to Robin Seggelmann
+ <seggelmann@fh-muenster.de> and Michael Tuexen <tuexen@fh-muenster.de>
+ for preparing the fix. (CVE-2011-4108)
+ [Robin Seggelmann, Michael Tuexen]
+
+ *) Stop policy check failure freeing same buffer twice. (CVE-2011-4109)
+ [Ben Laurie, Kasper <ekasper@google.com>]
+
+ *) Clear bytes used for block padding of SSL 3.0 records.
+ (CVE-2011-4576)
+ [Adam Langley (Google)]
+
+ *) Only allow one SGC handshake restart for SSL/TLS. Thanks to George
+ Kadianakis <desnacked@gmail.com> for discovering this issue and
+ Adam Langley for preparing the fix. (CVE-2011-4619)
+ [Adam Langley (Google)]
+
+ *) Prevent malformed RFC3779 data triggering an assertion failure.
+ Thanks to Andrew Chi, BBN Technologies, for discovering the flaw
+ and Rob Austein <sra@hactrn.net> for fixing it. (CVE-2011-4577)
+ [Rob Austein <sra@hactrn.net>]
+
+ *) Fix ssl_ciph.c set-up race.
+ [Adam Langley (Google)]
+
+ *) Fix spurious failures in ecdsatest.c.
+ [Emilia Käsper (Google)]
+
+ *) Fix the BIO_f_buffer() implementation (which was mixing different
+ interpretations of the '..._len' fields).
+ [Adam Langley (Google)]
+
+ *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
+ BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
+ threads won't reuse the same blinding coefficients.
+
+ This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
+ lock to call BN_BLINDING_invert_ex, and avoids one use of
+ BN_BLINDING_update for each BN_BLINDING structure (previously,
+ the last update always remained unused).
+ [Emilia Käsper (Google)]
+
+ *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
+ for multi-threaded use of ECDH.
+ [Adam Langley (Google)]
+
+ *) Fix x509_name_ex_d2i memory leak on bad inputs.
+ [Bodo Moeller]
+
+ *) Add protection against ECDSA timing attacks as mentioned in the paper
+ by Billy Bob Brumley and Nicola Tuveri, see:
+
+ http://eprint.iacr.org/2011/232.pdf
+
+ [Billy Bob Brumley and Nicola Tuveri]
+
Changes between 0.9.8q and 0.9.8r [8 Feb 2011]
*) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
processed after finishing the corresponding handshake. There is
currently no limitation to this buffer allowing an attacker to perform
a DOS attack with sending records with future epochs until there is no
- memory left. This patch adds the pqueue_size() function to detemine
+ memory left. This patch adds the pqueue_size() function to determine
the size of a buffer and limits the record buffer to 100 entries.
(CVE-2009-1377)
[Robin Seggelmann, discovered by Daniel Mentz]
ChangeCipherSpec as first record (CVE-2009-1386).
[PR #1679]
- *) Fix a state transitition in s3_srvr.c and d1_srvr.c
+ *) Fix a state transition in s3_srvr.c and d1_srvr.c
(was using SSL3_ST_CW_CLNT_HELLO_B, should be ..._ST_SW_SRVR_...).
[Nagendra Modadugu]
'-key2 ...', '-servername_fatal' (subject to change). This allows
testing the HostName extension for a specific single host name ('-cert'
and '-key' remain fallbacks for handshakes without HostName
- negotiation). If the unrecogninzed_name alert has to be sent, this by
+ negotiation). If the unrecognized_name alert has to be sent, this by
default is a warning; it becomes fatal with the '-servername_fatal'
option.
to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
[Walter Goulet]
- *) Remove buggy and incompletet DH cert support from
+ *) Remove buggy and incomplete DH cert support from
ssl/ssl_rsa.c and ssl/s3_both.c
[Nils Larsch]
[Geoff Thorpe]
*) Reorganise PKCS#7 code to separate the digest location functionality
- into PKCS7_find_digest(), digest addtion into PKCS7_bio_add_digest().
+ into PKCS7_find_digest(), digest addition into PKCS7_bio_add_digest().
New function PKCS7_set_digest() to set the digest type for PKCS#7
digestedData type. Add additional code to correctly generate the
digestedData type and add support for this type in PKCS7 initialization
[Geoff Thorpe and Richard Levitte]
*) Add Makefile.shared, a helper makefile to build shared
- libraries. Addapt Makefile.org.
+ libraries. Adapt Makefile.org.
[Richard Levitte]
*) Add version info to Win32 DLLs.
Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
*) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
- via timing by performing a MAC computation even if incorrrect
+ via timing by performing a MAC computation even if incorrect
block cipher padding has been found. This is a countermeasure
against active attacks where the attacker has to distinguish
between bad padding and a MAC verification error. (CVE-2003-0078)
default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
[Steve Henson]
- *) Prelminary ENGINE config module.
+ *) Preliminary ENGINE config module.
[Steve Henson]
*) New experimental application configuration code.
*) New function SSL_renegotiate_pending(). This returns true once
renegotiation has been requested (either SSL_renegotiate() call
- or HelloRequest/ClientHello receveived from the peer) and becomes
+ or HelloRequest/ClientHello received from the peer) and becomes
false once a handshake has been completed.
(For servers, SSL_renegotiate() followed by SSL_do_handshake()
sends a HelloRequest, but does not ensure that a handshake takes
OCSP_SERVICELOC extension. Tidy up print OCSP format.
[Steve Henson]
- *) Make mkdef.pl parse some of the ASN1 macros and add apropriate
+ *) Make mkdef.pl parse some of the ASN1 macros and add appropriate
entries for variables.
[Steve Henson]
[Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
#if 0
- The following entry accidentily appeared in the CHANGES file
+ The following entry accidentally appeared in the CHANGES file
distributed with OpenSSL 0.9.7. The modifications described in
it do *not* apply to OpenSSL 0.9.7.
[Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
*) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
- should end in 'break', not 'goto end' which circuments various
+ should end in 'break', not 'goto end' which circumvents various
cleanups done in state SSL_ST_OK. But session related stuff
must be disabled for SSL_ST_OK in the case that we just sent a
HelloRequest.
[Sven Uszpelkat <su@celocom.de>]
*) Major change in util/mkdef.pl to include extra information
- about each symbol, as well as presentig variables as well
+ about each symbol, as well as presenting variables as well
as functions. This change means that there's n more need
to rebuild the .num files when some algorithms are excluded.
[Richard Levitte]
*) When some versions of IIS use the 'NET' form of private key the
key derivation algorithm is different. Normally MD5(password) is
used as a 128 bit RC4 key. In the modified case
- MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
+ MD5(MD5(password) + "SGCKEYSALT") is used instead. Added some
new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
as the old Netscape_RSA functions except they have an additional
'sgckey' parameter which uses the modified algorithm. Also added
its own key.
ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
to parameters -- in previous versions (since OpenSSL 0.9.3) the
- 'default key' from SSL_CTX_set_tmp_dh would always be lost, meanining
+ 'default key' from SSL_CTX_set_tmp_dh would always be lost, meaning
you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
[Bodo Moeller]
include a #define from the old name to the new. The original intent
was that statically linked binaries could for example just call
SSLeay_add_all_ciphers() to just add ciphers to the table and not
- link with digests. This never worked becayse SSLeay_add_all_digests()
+ link with digests. This never worked because SSLeay_add_all_digests()
and SSLeay_add_all_ciphers() were in the same source file so calling
one would link with the other. They are now in separate source files.
[Steve Henson]
*) Changes to X509_ATTRIBUTE utilities. These have been renamed from
X509_*() to X509at_*() on the grounds that they don't handle X509
- structures and behave in an analagous way to the X509v3 functions:
+ structures and behave in an analogous way to the X509v3 functions:
they shouldn't be called directly but wrapper functions should be used
instead.
[Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
*) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
- advapi32.lib to Win32 build and change the pem test comparision
+ advapi32.lib to Win32 build and change the pem test comparison
to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
and crypto/des/ede_cbcm_enc.c.
other platforms details on the command line without having to patch the
Configure script everytime: One now can use ``perl Configure
<id>:<details>'', i.e. platform ids are allowed to have details appended
- to them (seperated by colons). This is treated as there would be a static
+ to them (separated by colons). This is treated as there would be a static
pre-configured entry in Configure's %table under key <id> with value
<details> and ``perl Configure <id>'' is called. So, when you want to
perform a quick test-compile under FreeBSD 3.1 with pgcc and without
*) General source tree makefile cleanups: Made `making xxx in yyy...'
display consistent in the source tree and replaced `/bin/rm' by `rm'.
- Additonally cleaned up the `make links' target: Remove unnecessary
+ Additionally cleaned up the `make links' target: Remove unnecessary
semicolons, subsequent redundant removes, inline point.sh into mklink.sh
to speed processing and no longer clutter the display with confusing
stuff. Instead only the actually done links are displayed.
error code, add initial support to X509_print() and x509 application.
[Steve Henson]
- *) Takes a deep breath and start addding X509 V3 extension support code. Add
+ *) Takes a deep breath and start adding X509 V3 extension support code. Add
files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
stuff is currently isolated and isn't even compiled yet.
[Steve Henson]
*) Fixed sk_insert which never worked properly.
[Steve Henson]
- *) Fix ASN1 macros so they can handle indefinite length construted
+ *) Fix ASN1 macros so they can handle indefinite length constructed
EXPLICIT tags. Some non standard certificates use these: they can now
be read in.
[Steve Henson]
*) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
into a single doc/ssleay.txt bundle. This way the information is still
preserved but no longer messes up this directory. Now it's new room for
- the new set of documenation files.
+ the new set of documentation files.
[Ralf S. Engelschall]
*) SETs were incorrectly DER encoded. This was a major pain, because they
projects / openssl.git / blobdiff