sudo apt-get -yq --no-install-suggests --no-install-recommends --force-yes install unifdef
- uses: actions/checkout@v2
- name: config
- run: ./config --strict-warnings enable-fips && perl configdata.pm --dump
+ run: ./config --banner=Configured --strict-warnings enable-fips && perl configdata.pm --dump
- name: make build_generated
run: make -s build_generated
- name: make update
- run: make -s update
+ run: make update
- name: git diff
run: git diff --exit-code
steps:
- uses: actions/checkout@v2
- name: config
- run: ./config --strict-warnings enable-fips && perl configdata.pm --dump
+ run: ./config --banner=Configured --strict-warnings enable-fips && perl configdata.pm --dump
- name: make build_generated
run: make -s build_generated
- name: make doc-nits
run: make doc-nits
+ - name: make md-nits
+ run: |
+ sudo gem install mdl
+ make md-nits
# This checks that we use ANSI C language syntax and semantics.
# We are not as strict with libraries, but rather adapt to what's
steps:
- uses: actions/checkout@v2
- name: config
- run: CPPFLAGS=-ansi ./config no-asm no-makedepend enable-buildtest-c++ enable-fips --strict-warnings -D_DEFAULT_SOURCE && perl configdata.pm --dump
+ run: CPPFLAGS=-ansi ./config --banner=Configured no-asm no-makedepend enable-buildtest-c++ enable-fips --strict-warnings -D_DEFAULT_SOURCE && perl configdata.pm --dump
- name: make
run: make -s -j4
steps:
- uses: actions/checkout@v2
- name: config
- run: ./config enable-fips --strict-warnings && perl configdata.pm --dump
+ run: ./config --banner=Configured enable-fips --strict-warnings && perl configdata.pm --dump
- name: make
run: make -s -j4
- name: make test
steps:
- uses: actions/checkout@v2
- name: config
- run: CC=clang ./config no-fips --strict-warnings && perl configdata.pm --dump
+ run: CC=clang ./config --banner=Configured no-fips --strict-warnings && perl configdata.pm --dump
- name: make
run: make -s -j4
- name: make test
steps:
- uses: actions/checkout@v2
- name: config
- run: ./config --strict-warnings no-bulk no-pic no-asm -DOPENSSL_NO_SECURE_MEMORY -DOPENSSL_SMALL_FOOTPRINT && perl configdata.pm --dump
+ run: ./config --banner=Configured --strict-warnings no-bulk no-pic no-asm -DOPENSSL_NO_SECURE_MEMORY -DOPENSSL_SMALL_FOOTPRINT && perl configdata.pm --dump
- name: make
- run: make -s -j4
+ run: make -j4 # verbose, so no -s here
- name: make test
run: make test HARNESS_JOBS=${HARNESS_JOBS:-4}
steps:
- uses: actions/checkout@v2
- name: config
- run: ./config --strict-warnings no-deprecated enable-fips && perl configdata.pm --dump
+ run: ./config --banner=Configured --strict-warnings no-deprecated enable-fips && perl configdata.pm --dump
- name: make
run: make -s -j4
- name: make test
steps:
- uses: actions/checkout@v2
- name: config
- run: ./config --strict-warnings no-shared no-fips && perl configdata.pm --dump
+ run: ./config --banner=Configured --strict-warnings no-shared no-fips && perl configdata.pm --dump
- name: make
run: make -s -j4
- name: make test
steps:
- uses: actions/checkout@v2
- name: config
- run: ./config --debug enable-asan enable-ubsan no-cached-fetch no-fips no-dtls no-tls1 no-tls1-method no-tls1_1 no-tls1_1-method no-async && perl configdata.pm --dump
+ run: ./config --banner=Configured --debug enable-asan enable-ubsan no-cached-fetch no-fips no-dtls no-tls1 no-tls1-method no-tls1_1 no-tls1_1-method no-async && perl configdata.pm --dump
- name: make
run: make -s -j4
- name: make test
- run: make test HARNESS_JOBS=${HARNESS_JOBS:-4} OPENSSL_TEST_RAND_ORDER=0 TESTS="-test_fuzz* -test_ssl_* -test_evp -test_cmp_http -test_verify -test_cms -test_store -test_enc -[01][0-9]"
+ run: make test HARNESS_JOBS=${HARNESS_JOBS:-4} OPENSSL_TEST_RAND_ORDER=0 TESTS="-test_fuzz* -test_ssl_* -test_sslapi -test_evp -test_cmp_http -test_verify -test_cms -test_store -test_enc -[01][0-9]"
+
+ address_ub_sanitizer:
+ runs-on: ubuntu-latest
+ steps:
+ - uses: actions/checkout@v2
+ - name: config
+ run: ./config --banner=Configured --debug enable-asan enable-ubsan enable-rc5 enable-md2 enable-ec_nistp_64_gcc_128 enable-fips && perl configdata.pm --dump
+ - name: make
+ run: make -s -j4
+ - name: make test
+ run: make test HARNESS_JOBS=${HARNESS_JOBS:-4} OPENSSL_TEST_RAND_ORDER=0
- sanitizers:
+ memory_sanitizer:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v2
- name: config
- run: ./config --debug enable-asan enable-ubsan enable-rc5 enable-md2 enable-ec_nistp_64_gcc_128 enable-fips && perl configdata.pm --dump
+ # --debug -O1 is to produce a debug build that runs in a reasonable amount of time
+ run: CC=clang ./config --banner=Configured --debug -O1 -fsanitize=memory -DOSSL_SANITIZE_MEMORY -fno-optimize-sibling-calls enable-rc5 enable-md2 enable-ec_nistp_64_gcc_128 enable-fips && perl configdata.pm --dump
- name: make
run: make -s -j4
- name: make test
steps:
- uses: actions/checkout@v2
- name: config
- run: CC=clang ./config no-fips --strict-warnings -fsanitize=thread && perl configdata.pm --dump
+ run: CC=clang ./config --banner=Configured no-fips --strict-warnings -fsanitize=thread && perl configdata.pm --dump
- name: make
run: make -s -j4
- name: make test
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v2
+ - name: modprobe tls
+ run: sudo modprobe tls
- name: config
- run: ./config --strict-warnings no-ec enable-ssl-trace enable-zlib enable-zlib-dynamic enable-crypto-mdebug enable-crypto-mdebug-backtrace enable-egd enable-fips && perl configdata.pm --dump
+ run: ./config --banner=Configured --strict-warnings no-ec enable-ssl-trace enable-zlib enable-zlib-dynamic enable-crypto-mdebug enable-crypto-mdebug-backtrace enable-egd enable-ktls enable-fips && perl configdata.pm --dump
- name: make
run: make -s -j4
- name: make test
steps:
- uses: actions/checkout@v2
- name: config
- run: ./config --strict-warnings no-legacy enable-fips && perl configdata.pm --dump
+ run: ./config --banner=Configured --strict-warnings no-legacy enable-fips && perl configdata.pm --dump
- name: make
run: make -s -j4
- name: make test
steps:
- uses: actions/checkout@v2
- name: config
- run: ./config -Werror --debug no-afalgeng no-shared enable-crypto-mdebug enable-rc5 enable-md2 enable-ssl3 enable-ssl3-method enable-weak-ssl-ciphers enable-zlib enable-ec_nistp_64_gcc_128 no-fips && perl configdata.pm --dump
+ run: ./config --banner=Configured -Werror --debug no-afalgeng no-shared enable-crypto-mdebug enable-rc5 enable-md2 enable-ssl3 enable-ssl3-method enable-weak-ssl-ciphers enable-zlib enable-ec_nistp_64_gcc_128 no-fips && perl configdata.pm --dump
- name: make
run: make -s -j4
- name: make test
steps:
- uses: actions/checkout@v2
- name: config
- run: ./config no-asm no-makedepend enable-buildtest-c++ enable-fips --strict-warnings -D_DEFAULT_SOURCE && perl configdata.pm --dump
+ run: ./config --banner=Configured no-asm no-makedepend enable-buildtest-c++ enable-fips --strict-warnings -D_DEFAULT_SOURCE && perl configdata.pm --dump
- name: make
run: make -s -j4
- name: make test
mkdir ./build
mkdir ./install
- name: config
- run: ../config enable-fips --strict-warnings --prefix=$(cd ../install; pwd) && perl configdata.pm --dump
+ run: ../config --banner=Configured enable-fips enable-acvp-tests --strict-warnings --prefix=$(cd ../install; pwd) && perl configdata.pm --dump
working-directory: ./build
- name: make
run: make -s -j4
- name: package installs
run: |
sudo apt-get update
- sudo apt-get -yq install bison dejagnu gettext keyutils ldap-utils libldap2-dev libkeyutils-dev python3 python3-paste python3-pyrad slapd tcl-dev tcl-thread tcsh python3-virtualenv virtualenv
+ sudo apt-get -yq install bison gettext keyutils ldap-utils libldap2-dev libkeyutils-dev python3 python3-paste python3-pyrad slapd tcsh python3-virtualenv virtualenv python3-kdcproxy
- name: install cpanm and Test2::V0 for gost_engine testing
uses: perl-actions/install-with-cpanm@v1
with:
- name: setup hostname workaround
run: sudo hostname localhost
- name: config
- run: ./config --strict-warnings --debug no-afalgeng enable-rc5 enable-md2 enable-ssl3 enable-ssl3-method enable-weak-ssl-ciphers enable-zlib enable-ec_nistp_64_gcc_128 enable-external-tests no-fips && perl configdata.pm --dump
+ run: ./config --banner=Configured --strict-warnings --debug no-afalgeng enable-rc5 enable-md2 enable-ssl3 enable-ssl3-method enable-weak-ssl-ciphers enable-zlib enable-ec_nistp_64_gcc_128 enable-external-tests no-fips && perl configdata.pm --dump
- name: make
run: make -s -j4
- name: test external gost-engine
with:
submodules: recursive
- name: Configure OpenSSL
- run: ./config --strict-warnings --debug enable-external-tests && perl configdata.pm --dump
+ run: ./config --banner=Configured --strict-warnings --debug enable-external-tests && perl configdata.pm --dump
- name: make
run: make -s -j4
- name: Setup Python