5 Changes between 0.9.7c and 0.9.8 [xx XXX xxxx]
7 *) Add a local set of CRLs that can be used by X509_verify_cert() as well
8 as looking them up. This is useful when the verified structure may contain
9 CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
10 present unless the new PKCS7_NO_CRL flag is asserted.
13 *) Extend ASN1 oid configuration module. It now additionally accepts the
16 shortName = some long name, 1.2.3.4
19 *) Reimplemented the BN_CTX implementation. There is now no more static
20 limitation on the number of variables it can handle nor the depth of the
21 "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
22 information can now expand as required, and rather than having a single
23 static array of bignums, BN_CTX now uses a linked-list of such arrays
24 allowing it to expand on demand whilst maintaining the usefulness of
28 *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
29 to allow all RSA operations to function using a single BN_CTX.
32 *) Preliminary support for certificate policy evaluation and checking. This
33 is initially intended to pass the tests outlined in "Conformance Testing
34 of Relying Party Client Certificate Path Processing Logic" v1.07.
37 *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
38 remained unused and not that useful. A variety of other little bignum
39 tweaks and fixes have also been made continuing on from the audit (see
43 *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
44 associated ASN1, EVP and SSL functions and old ASN1 macros.
47 *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
48 and this should never fail. So the return value from the use of
49 BN_set_word() (which can fail due to needless expansion) is now deprecated;
50 if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
53 *) BN_CTX_get() should return zero-valued bignums, providing the same
54 initialised value as BN_new().
55 [Geoff Thorpe, suggested by Ulf Möller]
57 *) Support for inhibitAnyPolicy certificate extension.
60 *) An audit of the BIGNUM code is underway, for which debugging code is
61 enabled when BN_DEBUG is defined. This makes stricter enforcements on what
62 is considered valid when processing BIGNUMs, and causes execution to
63 assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
64 further steps are taken to deliberately pollute unused data in BIGNUM
65 structures to try and expose faulty code further on. For now, openssl will
66 (in its default mode of operation) continue to tolerate the inconsistent
67 forms that it has tolerated in the past, but authors and packagers should
68 consider trying openssl and their own applications when compiled with
69 these debugging symbols defined. It will help highlight potential bugs in
70 their own code, and will improve the test coverage for OpenSSL itself. At
71 some point, these tighter rules will become openssl's default to improve
72 maintainability, though the assert()s and other overheads will remain only
73 in debugging configurations. See bn.h for more details.
74 [Geoff Thorpe, Nils Larsch, Ulf Möller]
76 *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
77 that can only be obtained through BN_CTX_new() (which implicitly
78 initialises it). The presence of this function only made it possible
79 to overwrite an existing structure (and cause memory leaks).
82 *) Because of the callback-based approach for implementing LHASH as a
83 template type, lh_insert() adds opaque objects to hash-tables and
84 lh_doall() or lh_doall_arg() are typically used with a destructor callback
85 to clean up those corresponding objects before destroying the hash table
86 (and losing the object pointers). So some over-zealous constifications in
87 LHASH have been relaxed so that lh_insert() does not take (nor store) the
88 objects as "const" and the lh_doall[_arg] callback wrappers are not
89 prototyped to have "const" restrictions on the object pointers they are
90 given (and so aren't required to cast them away any more).
93 *) The tmdiff.h API was so ugly and minimal that our own timing utility
94 (speed) prefers to use its own implementation. The two implementations
95 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
96 its object type properly exposed (MS_TM) instead of casting to/from "char
97 *". This may still change yet if someone realises MS_TM and "ms_time_***"
98 aren't necessarily the greatest nomenclatures - but this is what was used
99 internally to the implementation so I've used that for now.
102 *) Ensure that deprecated functions do not get compiled when
103 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
104 the self-tests were still using deprecated key-generation functions so
105 these have been updated also.
108 *) Reorganise PKCS#7 code to separate the digest location functionality
109 into PKCS7_find_digest(), digest addtion into PKCS7_bio_add_digest().
110 New function PKCS7_set_digest() to set the digest type for PKCS#7
111 digestedData type. Add additional code to correctly generate the
112 digestedData type and add support for this type in PKCS7 initialization
116 *) New function PKCS7_set0_type_other() this initializes a PKCS7
117 structure of type "other".
120 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
121 sure the loop does correctly stop and breaking ("division by zero")
122 modulus operations are not performed. The (pre-generated) prime
123 table crypto/bn/bn_prime.h was already correct, but it could not be
124 re-generated on some platforms because of the "division by zero"
125 situation in the script.
126 [Ralf S. Engelschall]
128 *) Update support for ECC-based TLS ciphersuites according to
129 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
130 SHA-1 now is only used for "small" curves (where the
131 representation of a field element takes up to 24 bytes); for
132 larger curves, the field element resulting from ECDH is directly
133 used as premaster secret.
134 [Douglas Stebila (Sun Microsystems Laboratories)]
136 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
137 curve secp160r1 to the tests.
138 [Douglas Stebila (Sun Microsystems Laboratories)]
140 *) Add the possibility to load symbols globally with DSO.
141 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
143 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
144 control of the error stack.
147 *) Add support for STORE in ENGINE.
150 *) Add the STORE type. The intention is to provide a common interface
151 to certificate and key stores, be they simple file-based stores, or
152 HSM-type store, or LDAP stores, or...
153 NOTE: The code is currently UNTESTED and isn't really used anywhere.
156 *) Add a generic structure called OPENSSL_ITEM. This can be used to
157 pass a list of arguments to any function as well as provide a way
158 for a function to pass data back to the caller.
161 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
162 works like BUF_strdup() but can be used to duplicate a portion of
163 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
167 *) Add the function sk_find_ex() which works like sk_find(), but will
168 return an index to an element even if an exact match couldn't be
169 found. The index is guaranteed to point at the element where the
170 searched-for key would be inserted to preserve sorting order.
173 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
174 takes an extra flags argument for optional functionality. Currently,
175 the following flags are defined:
177 OBJ_BSEARCH_VALUE_ON_NOMATCH
178 This one gets OBJ_bsearch_ex() to return a pointer to the first
179 element where the comparing function returns a negative or zero
182 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
183 This one gets OBJ_bsearch_ex() to return a pointer to the first
184 element where the comparing function returns zero. This is useful
185 if there are more than one element where the comparing function
189 *) Make it possible to create self-signed certificates with 'openssl ca'
190 in such a way that the self-signed certificate becomes part of the
191 CA database and uses the same mechanisms for serial number generation
192 as all other certificate signing. The new flag '-selfsign' enables
193 this functionality. Adapt CA.sh and CA.pl.in.
196 *) Add functionality to check the public key of a certificate request
197 against a given private. This is useful to check that a certificate
198 request can be signed by that key (self-signing).
201 *) Make it possible to have multiple active certificates with the same
202 subject in the CA index file. This is done only if the keyword
203 'unique_subject' is set to 'no' in the main CA section (default
204 if 'CA_default') of the configuration file. The value is saved
205 with the database itself in a separate index attribute file,
206 named like the index file with '.attr' appended to the name.
209 *) Generate muti valued AVAs using '+' notation in config files for
213 *) Support for nameConstraints certificate extension.
216 *) Support for policyConstraints certificate extension.
219 *) Support for policyMappings certificate extension.
222 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
223 ENGINE as defaults for all supported algorithms irrespective of
224 the 'flags' parameter. 'flags' is now honoured, so applications
225 should make sure they are passing it correctly.
228 *) Make sure the default DSA_METHOD implementation only uses its
229 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
230 and change its own handlers to be NULL so as to remove unnecessary
231 indirection. This lets alternative implementations fallback to the
232 default implementation more easily.
235 *) Support for directoryName in GeneralName related extensions
239 *) Make it possible to link applications using Makefile.shared.
240 Make that possible even when linking against static libraries!
243 *) Support for single pass processing for S/MIME signing. This now
244 means that S/MIME signing can be done from a pipe, in addition
245 cleartext signing (multipart/signed type) is effectively streaming
246 and the signed data does not need to be all held in memory.
248 This is done with a new flag PKCS7_STREAM. When this flag is set
249 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
250 is done after the data is output (and digests calculated) in
254 *) Add full support for -rpath/-R, both in shared libraries and
255 applications, at least on the platforms where it's known how
259 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
260 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
261 will now compute a table of multiples of the generator that
262 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
263 faster (notably in the case of a single point multiplication,
265 [Nils Larsch, Bodo Moeller]
267 *) IPv6 support for certificate extensions. The various extensions
268 which use the IP:a.b.c.d can now take IPv6 addresses using the
269 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
273 *) Added an ENGINE that implements RSA by performing private key
274 exponentiations with the GMP library. The conversions to and from
275 GMP's mpz_t format aren't optimised nor are any montgomery forms
276 cached, and on x86 it appears OpenSSL's own performance has caught up.
277 However there are likely to be other architectures where GMP could
278 provide a boost. This ENGINE is not built in by default, but it can be
279 specified at Configure time and should be accompanied by the necessary
280 linker additions, eg;
281 ./config -DOPENSSL_USE_GMP -lgmp
284 *) "openssl engine" will not display ENGINE/DSO load failure errors when
285 testing availability of engines with "-t" - the old behaviour is
286 produced by increasing the feature's verbosity with "-tt".
289 *) ECDSA routines: under certain error conditions uninitialized BN objects
290 could be freed. Solution: make sure initialization is performed early
291 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
295 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
296 and DH_METHOD (eg. by ENGINE implementations) to override the normal
297 software implementations. For DSA and DH, parameter generation can
298 also be overriden by providing the appropriate method callbacks.
301 *) Change the "progress" mechanism used in key-generation and
302 primality testing to functions that take a new BN_GENCB pointer in
303 place of callback/argument pairs. The new API functions have "_ex"
304 postfixes and the older functions are reimplemented as wrappers for
305 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
306 declarations of the old functions to help (graceful) attempts to
307 migrate to the new functions. Also, the new key-generation API
308 functions operate on a caller-supplied key-structure and return
309 success/failure rather than returning a key or NULL - this is to
310 help make "keygen" another member function of RSA_METHOD etc.
312 Example for using the new callback interface:
314 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
318 BN_GENCB_set(&my_cb, my_callback, my_arg);
320 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
321 /* For the meaning of a, b in calls to my_callback(), see the
322 * documentation of the function that calls the callback.
323 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
324 * my_callback should return 1 if it wants BN_is_prime_ex()
325 * to continue, or 0 to stop.
330 *) Change the ZLIB compression method to be stateful, and make it
331 available to TLS with the number defined in
332 draft-ietf-tls-compression-04.txt.
335 *) Add the ASN.1 structures and functions for CertificatePair, which
336 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
338 CertificatePair ::= SEQUENCE {
339 forward [0] Certificate OPTIONAL,
340 reverse [1] Certificate OPTIONAL,
341 -- at least one of the pair shall be present -- }
343 Also implement the PEM functions to read and write certificate
344 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
346 This needed to be defined, mostly for the sake of the LDAP
347 attribute crossCertificatePair, but may prove useful elsewhere as
351 *) Make it possible to inhibit symlinking of shared libraries in
352 Makefile.shared, for Cygwin's sake.
355 *) Extend the BIGNUM API by creating new macros that behave like
358 void BN_set_sign(BIGNUM *a, int neg);
359 int BN_get_sign(const BIGNUM *a);
361 and avoid the need to access 'a->neg' directly in applications.
362 [Nils Larsch <nla@trustcenter.de>]
364 *) Implement fast modular reduction for pseudo-Mersenne primes
365 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
366 EC_GROUP_new_curve_GFp() will now automatically use this
368 [Nils Larsch <nla@trustcenter.de>]
370 *) Add new lock type (CRYPTO_LOCK_BN).
373 *) Change the ENGINE framework to automatically load engines
374 dynamically from specific directories unless they could be
375 found to already be built in or loaded. Move all the
376 current engines except for the cryptodev one to a new
378 The engines in engines/ are built as shared libraries if
379 the "shared" options was given to ./Configure or ./config.
380 Otherwise, they are inserted in libcrypto.a.
381 /usr/local/ssl/engines is the default directory for dynamic
382 engines, but that can be overriden at configure time through
383 the usual use of --prefix and/or --openssldir, and at run
384 time with the environment variable OPENSSL_ENGINES.
385 [Geoff Thorpe and Richard Levitte]
387 *) Add Makefile.shared, a helper makefile to build shared
388 libraries. Addapt Makefile.org.
391 *) Add version info to Win32 DLLs.
392 [Peter 'Luna' Runestig" <peter@runestig.com>]
394 *) Add new 'medium level' PKCS#12 API. Certificates and keys
395 can be added using this API to created arbitrary PKCS#12
396 files while avoiding the low level API.
398 New options to PKCS12_create(), key or cert can be NULL and
399 will then be omitted from the output file. The encryption
400 algorithm NIDs can be set to -1 for no encryption, the mac
401 iteration count can be set to 0 to omit the mac.
403 Enhance pkcs12 utility by making the -nokeys and -nocerts
404 options work when creating a PKCS#12 file. New option -nomac
405 to omit the mac, NONE can be set for an encryption algorithm.
406 New code is modified to use the enhanced PKCS12_create()
407 instead of the low level API.
410 *) Extend ASN1 encoder to support indefinite length constructed
411 encoding. This can output sequences tags and octet strings in
412 this form. Modify pk7_asn1.c to support indefinite length
413 encoding. This is experimental and needs additional code to
414 be useful, such as an ASN1 bio and some enhanced streaming
417 Extend template encode functionality so that tagging is passed
418 down to the template encoder.
421 *) Let 'openssl req' fail if an argument to '-newkey' is not
422 recognized instead of using RSA as a default.
425 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
426 As these are not official, they are not included in "ALL";
427 the "ECCdraft" ciphersuite group alias can be used to select them.
428 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
430 *) Add ECDH engine support.
431 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
433 *) Add ECDH in new directory crypto/ecdh/.
434 [Douglas Stebila (Sun Microsystems Laboratories)]
436 *) Let BN_rand_range() abort with an error after 100 iterations
437 without success (which indicates a broken PRNG).
440 *) Change BN_mod_sqrt() so that it verifies that the input value
441 is really the square of the return value. (Previously,
442 BN_mod_sqrt would show GIGO behaviour.)
445 *) Add named elliptic curves over binary fields from X9.62, SECG,
446 and WAP/WTLS; add OIDs that were still missing.
448 [Sheueling Chang Shantz and Douglas Stebila
449 (Sun Microsystems Laboratories)]
451 *) Extend the EC library for elliptic curves over binary fields
452 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
455 EC_GF2m_simple_method
459 EC_GROUP_new_curve_GF2m
460 EC_GROUP_set_curve_GF2m
461 EC_GROUP_get_curve_GF2m
462 EC_POINT_set_affine_coordinates_GF2m
463 EC_POINT_get_affine_coordinates_GF2m
464 EC_POINT_set_compressed_coordinates_GF2m
466 Point compression for binary fields is disabled by default for
467 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
470 As binary polynomials are represented as BIGNUMs, various members
471 of the EC_GROUP and EC_POINT data structures can be shared
472 between the implementations for prime fields and binary fields;
473 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
474 are essentially identical to their ..._GFp counterparts.
475 (For simplicity, the '..._GFp' prefix has been dropped from
476 various internal method names.)
478 An internal 'field_div' method (similar to 'field_mul' and
479 'field_sqr') has been added; this is used only for binary fields.
481 [Sheueling Chang Shantz and Douglas Stebila
482 (Sun Microsystems Laboratories)]
484 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
485 through methods ('mul', 'precompute_mult').
487 The generic implementations (now internally called 'ec_wNAF_mul'
488 and 'ec_wNAF_precomputed_mult') remain the default if these
489 methods are undefined.
491 [Sheueling Chang Shantz and Douglas Stebila
492 (Sun Microsystems Laboratories)]
494 *) New function EC_GROUP_get_degree, which is defined through
495 EC_METHOD. For curves over prime fields, this returns the bit
496 length of the modulus.
498 [Sheueling Chang Shantz and Douglas Stebila
499 (Sun Microsystems Laboratories)]
501 *) New functions EC_GROUP_dup, EC_POINT_dup.
502 (These simply call ..._new and ..._copy).
504 [Sheueling Chang Shantz and Douglas Stebila
505 (Sun Microsystems Laboratories)]
507 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
508 Polynomials are represented as BIGNUMs (where the sign bit is not
509 used) in the following functions [macros]:
512 BN_GF2m_sub [= BN_GF2m_add]
513 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
514 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
515 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
517 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
518 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
519 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
520 BN_GF2m_cmp [= BN_ucmp]
522 (Note that only the 'mod' functions are actually for fields GF(2^m).
523 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
525 For some functions, an the irreducible polynomial defining a
526 field can be given as an 'unsigned int[]' with strictly
527 decreasing elements giving the indices of those bits that are set;
528 i.e., p[] represents the polynomial
529 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
531 p[0] > p[1] > ... > p[k] = 0.
532 This applies to the following functions:
537 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
538 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
541 BN_GF2m_mod_solve_quad_arr
545 Conversion can be performed by the following functions:
550 bntest.c has additional tests for binary polynomial arithmetic.
552 Two implementations for BN_GF2m_mod_div() are available.
553 The default algorithm simply uses BN_GF2m_mod_inv() and
554 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
555 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
556 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
558 [Sheueling Chang Shantz and Douglas Stebila
559 (Sun Microsystems Laboratories)]
561 *) Add new error code 'ERR_R_DISABLED' that can be used when some
562 functionality is disabled at compile-time.
563 [Douglas Stebila <douglas.stebila@sun.com>]
565 *) Change default behaviour of 'openssl asn1parse' so that more
566 information is visible when viewing, e.g., a certificate:
568 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
569 mode the content of non-printable OCTET STRINGs is output in a
570 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
571 avoid the appearance of a printable string.
572 [Nils Larsch <nla@trustcenter.de>]
574 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
576 EC_GROUP_set_asn1_flag()
577 EC_GROUP_get_asn1_flag()
578 EC_GROUP_set_point_conversion_form()
579 EC_GROUP_get_point_conversion_form()
580 These control ASN1 encoding details:
581 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
582 has been set to OPENSSL_EC_NAMED_CURVE.
583 - Points are encoded in uncompressed form by default; options for
584 asn1_for are as for point2oct, namely
585 POINT_CONVERSION_COMPRESSED
586 POINT_CONVERSION_UNCOMPRESSED
587 POINT_CONVERSION_HYBRID
589 Also add 'seed' and 'seed_len' members to EC_GROUP with access
593 EC_GROUP_get_seed_len()
594 This is used only for ASN1 purposes (so far).
595 [Nils Larsch <nla@trustcenter.de>]
597 *) Add 'field_type' member to EC_METHOD, which holds the NID
598 of the appropriate field type OID. The new function
599 EC_METHOD_get_field_type() returns this value.
600 [Nils Larsch <nla@trustcenter.de>]
607 providing useful interfaces to EC_POINT_point2oct() and
608 EC_POINT_oct2point().
609 [Nils Larsch <nla@trustcenter.de>]
611 *) Change internals of the EC library so that the functions
612 EC_GROUP_set_generator()
613 EC_GROUP_get_generator()
615 EC_GROUP_get_cofactor()
616 are implemented directly in crypto/ec/ec_lib.c and not dispatched
617 to methods, which would lead to unnecessary code duplication when
618 adding different types of curves.
619 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
621 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
622 arithmetic, and such that modified wNAFs are generated
623 (which avoid length expansion in many cases).
626 *) Add a function EC_GROUP_check_discriminant() (defined via
627 EC_METHOD) that verifies that the curve discriminant is non-zero.
629 Add a function EC_GROUP_check() that makes some sanity tests
630 on a EC_GROUP, its generator and order. This includes
631 EC_GROUP_check_discriminant().
632 [Nils Larsch <nla@trustcenter.de>]
634 *) Add ECDSA in new directory crypto/ecdsa/.
636 Add applications 'openssl ecparam' and 'openssl ecdsa'
637 (these are based on 'openssl dsaparam' and 'openssl dsa').
639 ECDSA support is also included in various other files across the
640 library. Most notably,
641 - 'openssl req' now has a '-newkey ecdsa:file' option;
642 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
643 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
644 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
645 them suitable for ECDSA where domain parameters must be
646 extracted before the specific public key;
647 - ECDSA engine support has been added.
648 [Nils Larsch <nla@trustcenter.de>]
650 *) Include some named elliptic curves, and add OIDs from X9.62,
651 SECG, and WAP/WTLS. Each curve can be obtained from the new
653 EC_GROUP_new_by_nid(),
654 and the list of available named curves can be obtained with
655 EC_get_builtin_curves().
656 Also add a 'curve_name' member to EC_GROUP objects, which can be
660 [Nils Larsch <nla@trustcenter.de, Bodo Moeller]
662 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
663 was actually never needed) and in BN_mul(). The removal in BN_mul()
664 required a small change in bn_mul_part_recursive() and the addition
665 of the functions bn_cmp_part_words(), bn_sub_part_words() and
666 bn_add_part_words(), which do the same thing as bn_cmp_words(),
667 bn_sub_words() and bn_add_words() except they take arrays with
671 Changes between 0.9.7c and 0.9.7d [xx XXX XXXX]
673 *) X509 verify fixes. Disable broken certificate workarounds when
674 X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
675 keyUsage extension present. Don't accept CRLs with unhandled critical
676 extensions: since verify currently doesn't process CRL extensions this
677 rejects a CRL with *any* critical extensions. Add new verify error codes
681 *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
682 A clarification of RFC2560 will require the use of OCTET STRINGs and
683 some implementations cannot handle the current raw format. Since OpenSSL
684 copies and compares OCSP nonces as opaque blobs without any attempt at
685 parsing them this should not create any compatibility issues.
688 *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
689 calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
690 this HMAC (and other) operations are several times slower than OpenSSL
694 *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
695 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
697 *) Use the correct content when signing type "other".
700 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
702 *) Fix various bugs revealed by running the NISCC test suite:
704 Stop out of bounds reads in the ASN1 code when presented with
705 invalid tags (CAN-2003-0543 and CAN-2003-0544).
707 Free up ASN1_TYPE correctly if ANY type is invalid (CAN-2003-0545).
709 If verify callback ignores invalid public key errors don't try to check
710 certificate signature with the NULL public key.
714 *) New -ignore_err option in ocsp application to stop the server
715 exiting on the first error in a request.
718 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
719 if the server requested one: as stated in TLS 1.0 and SSL 3.0
723 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
724 extra data after the compression methods not only for TLS 1.0
725 but also for SSL 3.0 (as required by the specification).
726 [Bodo Moeller; problem pointed out by Matthias Loepfe]
728 *) Change X509_certificate_type() to mark the key as exported/exportable
729 when it's 512 *bits* long, not 512 bytes.
732 *) Change AES_cbc_encrypt() so it outputs exact multiple of
733 blocks during encryption.
736 *) Various fixes to base64 BIO and non blocking I/O. On write
737 flushes were not handled properly if the BIO retried. On read
738 data was not being buffered properly and had various logic bugs.
739 This also affects blocking I/O when the data being decoded is a
743 *) Various S/MIME bugfixes and compatibility changes:
744 output correct application/pkcs7 MIME type if
745 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
746 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
747 of files as .eml work). Correctly handle very long lines in MIME
751 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
753 *) Countermeasure against the Klima-Pokorny-Rosa extension of
754 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
755 a protocol version number mismatch like a decryption error
756 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
759 *) Turn on RSA blinding by default in the default implementation
760 to avoid a timing attack. Applications that don't want it can call
761 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
762 They would be ill-advised to do so in most cases.
763 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
765 *) Change RSA blinding code so that it works when the PRNG is not
766 seeded (in this case, the secret RSA exponent is abused as
767 an unpredictable seed -- if it is not unpredictable, there
768 is no point in blinding anyway). Make RSA blinding thread-safe
769 by remembering the creator's thread ID in rsa->blinding and
770 having all other threads use local one-time blinding factors
771 (this requires more computation than sharing rsa->blinding, but
772 avoids excessive locking; and if an RSA object is not shared
773 between threads, blinding will still be very fast).
776 yet to be integrated into this CVS branch:
777 - Geoff's ENGINE_set_default() fix
779 *) Target "mingw" now allows native Windows code to be generated in
780 the Cygwin environment as well as with the MinGW compiler.
783 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
785 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
786 via timing by performing a MAC computation even if incorrrect
787 block cipher padding has been found. This is a countermeasure
788 against active attacks where the attacker has to distinguish
789 between bad padding and a MAC verification error. (CAN-2003-0078)
791 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
792 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
793 Martin Vuagnoux (EPFL, Ilion)]
795 *) Make the no-err option work as intended. The intention with no-err
796 is not to have the whole error stack handling routines removed from
797 libcrypto, it's only intended to remove all the function name and
798 reason texts, thereby removing some of the footprint that may not
799 be interesting if those errors aren't displayed anyway.
801 NOTE: it's still possible for any application or module to have it's
802 own set of error texts inserted. The routines are there, just not
803 used by default when no-err is given.
806 *) Add support for FreeBSD on IA64.
807 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
809 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
810 Kerberos function mit_des_cbc_cksum(). Before this change,
811 the value returned by DES_cbc_cksum() was like the one from
812 mit_des_cbc_cksum(), except the bytes were swapped.
813 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
815 *) Allow an application to disable the automatic SSL chain building.
816 Before this a rather primitive chain build was always performed in
817 ssl3_output_cert_chain(): an application had no way to send the
818 correct chain if the automatic operation produced an incorrect result.
820 Now the chain builder is disabled if either:
822 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
824 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
826 The reasoning behind this is that an application would not want the
827 auto chain building to take place if extra chain certificates are
828 present and it might also want a means of sending no additional
829 certificates (for example the chain has two certificates and the
833 *) Add the possibility to build without the ENGINE framework.
834 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
836 *) Under Win32 gmtime() can return NULL: check return value in
837 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
840 *) DSA routines: under certain error conditions uninitialized BN objects
841 could be freed. Solution: make sure initialization is performed early
842 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
843 Nils Larsch <nla@trustcenter.de> via PR#459)
846 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
847 checked on reconnect on the client side, therefore session resumption
848 could still fail with a "ssl session id is different" error. This
849 behaviour is masked when SSL_OP_ALL is used due to
850 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
851 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
855 *) IA-32 assembler support enhancements: unified ELF targets, support
856 for SCO/Caldera platforms, fix for Cygwin shared build.
859 *) Add support for FreeBSD on sparc64. As a consequence, support for
860 FreeBSD on non-x86 processors is separate from x86 processors on
861 the config script, much like the NetBSD support.
862 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
864 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
866 [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
869 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
870 code (06) was taken as the first octet of the session ID and the last
871 octet was ignored consequently. As a result SSLv2 client side session
872 caching could not have worked due to the session ID mismatch between
874 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
878 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
879 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
883 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
884 seems that in spite of existing for more than a year, many application
885 author have done nothing to provide the necessary callbacks, which
886 means that this particular engine will not work properly anywhere.
887 This is a very unfortunate situation which forces us, in the name
888 of usability, to give the hw_ncipher.c a static lock, which is part
890 NOTE: This is for the 0.9.7 series ONLY. This hack will never
891 appear in 0.9.8 or later. We EXPECT application authors to have
892 dealt properly with this when 0.9.8 is released (unless we actually
893 make such changes in the libcrypto locking code that changes will
894 have to be made anyway).
897 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
898 octets have been read, EOF or an error occurs. Without this change
899 some truncated ASN1 structures will not produce an error.
902 *) Disable Heimdal support, since it hasn't been fully implemented.
903 Still give the possibility to force the use of Heimdal, but with
904 warnings and a request that patches get sent to openssl-dev.
907 *) Add the VC-CE target, introduce the WINCE sysname, and add
908 INSTALL.WCE and appropriate conditionals to make it build.
909 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
911 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
912 cygssl-x.y.z.dll, where x, y and z are the major, minor and
913 edit numbers of the version.
914 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
916 *) Introduce safe string copy and catenation functions
917 (BUF_strlcpy() and BUF_strlcat()).
918 [Ben Laurie (CHATS) and Richard Levitte]
920 *) Avoid using fixed-size buffers for one-line DNs.
923 *) Add BUF_MEM_grow_clean() to avoid information leakage when
924 resizing buffers containing secrets, and use where appropriate.
927 *) Avoid using fixed size buffers for configuration file location.
930 *) Avoid filename truncation for various CA files.
933 *) Use sizeof in preference to magic numbers.
936 *) Avoid filename truncation in cert requests.
939 *) Add assertions to check for (supposedly impossible) buffer
943 *) Don't cache truncated DNS entries in the local cache (this could
944 potentially lead to a spoofing attack).
947 *) Fix various buffers to be large enough for hex/decimal
948 representations in a platform independent manner.
951 *) Add CRYPTO_realloc_clean() to avoid information leakage when
952 resizing buffers containing secrets, and use where appropriate.
955 *) Add BIO_indent() to avoid much slightly worrying code to do
959 *) Convert sprintf()/BIO_puts() to BIO_printf().
962 *) buffer_gets() could terminate with the buffer only half
966 *) Add assertions to prevent user-supplied crypto functions from
967 overflowing internal buffers by having large block sizes, etc.
970 *) New OPENSSL_assert() macro (similar to assert(), but enabled
974 *) Eliminate unused copy of key in RC4.
977 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
980 *) Fix off-by-one error in EGD path.
983 *) If RANDFILE path is too long, ignore instead of truncating.
986 *) Eliminate unused and incorrectly sized X.509 structure
990 *) Eliminate unused and dangerous function knumber().
993 *) Eliminate unused and dangerous structure, KSSL_ERR.
996 *) Protect against overlong session ID context length in an encoded
997 session object. Since these are local, this does not appear to be
1001 *) Change from security patch (see 0.9.6e below) that did not affect
1002 the 0.9.6 release series:
1004 Remote buffer overflow in SSL3 protocol - an attacker could
1005 supply an oversized master key in Kerberos-enabled versions.
1007 [Ben Laurie (CHATS)]
1009 *) Change the SSL kerb5 codes to match RFC 2712.
1012 *) Make -nameopt work fully for req and add -reqopt switch.
1013 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
1015 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
1016 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
1018 *) Make sure tests can be performed even if the corresponding algorithms
1019 have been removed entirely. This was also the last step to make
1020 OpenSSL compilable with DJGPP under all reasonable conditions.
1021 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
1023 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
1024 to allow version independent disabling of normally unselected ciphers,
1025 which may be activated as a side-effect of selecting a single cipher.
1027 (E.g., cipher list string "RSA" enables ciphersuites that are left
1028 out of "ALL" because they do not provide symmetric encryption.
1029 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
1030 [Lutz Jaenicke, Bodo Moeller]
1032 *) Add appropriate support for separate platform-dependent build
1033 directories. The recommended way to make a platform-dependent
1034 build directory is the following (tested on Linux), maybe with
1037 # Place yourself outside of the OpenSSL source tree. In
1038 # this example, the environment variable OPENSSL_SOURCE
1039 # is assumed to contain the absolute OpenSSL source directory.
1040 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
1041 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
1042 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
1043 mkdir -p `dirname $F`
1044 ln -s $OPENSSL_SOURCE/$F $F
1047 To be absolutely sure not to disturb the source tree, a "make clean"
1048 is a good thing. If it isn't successfull, don't worry about it,
1049 it probably means the source directory is very clean.
1052 *) Make sure any ENGINE control commands make local copies of string
1053 pointers passed to them whenever necessary. Otherwise it is possible
1054 the caller may have overwritten (or deallocated) the original string
1055 data when a later ENGINE operation tries to use the stored values.
1056 [Götz Babin-Ebell <babinebell@trustcenter.de>]
1058 *) Improve diagnostics in file reading and command-line digests.
1059 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
1061 *) Add AES modes CFB and OFB to the object database. Correct an
1062 error in AES-CFB decryption.
1065 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
1066 allows existing EVP_CIPHER_CTX structures to be reused after
1067 calling EVP_*Final(). This behaviour is used by encryption
1068 BIOs and some applications. This has the side effect that
1069 applications must explicitly clean up cipher contexts with
1070 EVP_CIPHER_CTX_cleanup() or they will leak memory.
1073 *) Check the values of dna and dnb in bn_mul_recursive before calling
1074 bn_mul_comba (a non zero value means the a or b arrays do not contain
1075 n2 elements) and fallback to bn_mul_normal if either is not zero.
1078 *) Fix escaping of non-ASCII characters when using the -subj option
1079 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
1082 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
1083 form for "surname", serialNumber has no short form.
1084 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
1085 therefore remove "mail" short name for "internet 7".
1086 The OID for unique identifiers in X509 certificates is
1087 x500UniqueIdentifier, not uniqueIdentifier.
1088 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
1091 *) Add an "init" command to the ENGINE config module and auto initialize
1092 ENGINEs. Without any "init" command the ENGINE will be initialized
1093 after all ctrl commands have been executed on it. If init=1 the
1094 ENGINE is initailized at that point (ctrls before that point are run
1095 on the uninitialized ENGINE and after on the initialized one). If
1096 init=0 then the ENGINE will not be iniatialized at all.
1099 *) Fix the 'app_verify_callback' interface so that the user-defined
1100 argument is actually passed to the callback: In the
1101 SSL_CTX_set_cert_verify_callback() prototype, the callback
1102 declaration has been changed from
1105 int (*cb)(X509_STORE_CTX *,void *);
1106 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
1107 i=s->ctx->app_verify_callback(&ctx)
1108 has been changed into
1109 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
1111 To update applications using SSL_CTX_set_cert_verify_callback(),
1112 a dummy argument can be added to their callback functions.
1113 [D. K. Smetters <smetters@parc.xerox.com>]
1115 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
1116 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
1118 *) Add and OPENSSL_LOAD_CONF define which will cause
1119 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
1120 This allows older applications to transparently support certain
1121 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
1122 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
1123 load the config file and OPENSSL_add_all_algorithms_conf() which will
1124 always load it have also been added.
1127 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
1128 Adjust NIDs and EVP layer.
1129 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
1131 *) Config modules support in openssl utility.
1133 Most commands now load modules from the config file,
1134 though in a few (such as version) this isn't done
1135 because it couldn't be used for anything.
1137 In the case of ca and req the config file used is
1138 the same as the utility itself: that is the -config
1139 command line option can be used to specify an
1143 *) Move default behaviour from OPENSSL_config(). If appname is NULL
1144 use "openssl_conf" if filename is NULL use default openssl config file.
1147 *) Add an argument to OPENSSL_config() to allow the use of an alternative
1148 config section name. Add a new flag to tolerate a missing config file
1149 and move code to CONF_modules_load_file().
1152 *) Support for crypto accelerator cards from Accelerated Encryption
1153 Processing, www.aep.ie. (Use engine 'aep')
1154 The support was copied from 0.9.6c [engine] and adapted/corrected
1155 to work with the new engine framework.
1156 [AEP Inc. and Richard Levitte]
1158 *) Support for SureWare crypto accelerator cards from Baltimore
1159 Technologies. (Use engine 'sureware')
1160 The support was copied from 0.9.6c [engine] and adapted
1161 to work with the new engine framework.
1164 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
1165 make the newer ENGINE framework commands for the CHIL engine work.
1166 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
1168 *) Make it possible to produce shared libraries on ReliantUNIX.
1169 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
1171 *) Add the configuration target debug-linux-ppro.
1172 Make 'openssl rsa' use the general key loading routines
1173 implemented in apps.c, and make those routines able to
1174 handle the key format FORMAT_NETSCAPE and the variant
1176 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
1178 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
1179 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
1181 *) Add -keyform to rsautl, and document -engine.
1182 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
1184 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
1185 BIO_R_NO_SUCH_FILE error code rather than the generic
1186 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
1189 *) Add new functions
1191 ERR_peek_last_error_line
1192 ERR_peek_last_error_line_data.
1193 These are similar to
1196 ERR_peek_error_line_data,
1197 but report on the latest error recorded rather than the first one
1198 still in the error queue.
1199 [Ben Laurie, Bodo Moeller]
1201 *) default_algorithms option in ENGINE config module. This allows things
1203 default_algorithms = ALL
1204 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
1207 *) Prelminary ENGINE config module.
1210 *) New experimental application configuration code.
1213 *) Change the AES code to follow the same name structure as all other
1214 symmetric ciphers, and behave the same way. Move everything to
1215 the directory crypto/aes, thereby obsoleting crypto/rijndael.
1216 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
1218 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
1219 [Ben Laurie and Theo de Raadt]
1221 *) Add option to output public keys in req command.
1222 [Massimiliano Pala madwolf@openca.org]
1224 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
1225 (up to about 10% better than before for P-192 and P-224).
1228 *) New functions/macros
1230 SSL_CTX_set_msg_callback(ctx, cb)
1231 SSL_CTX_set_msg_callback_arg(ctx, arg)
1232 SSL_set_msg_callback(ssl, cb)
1233 SSL_set_msg_callback_arg(ssl, arg)
1235 to request calling a callback function
1237 void cb(int write_p, int version, int content_type,
1238 const void *buf, size_t len, SSL *ssl, void *arg)
1240 whenever a protocol message has been completely received
1241 (write_p == 0) or sent (write_p == 1). Here 'version' is the
1242 protocol version according to which the SSL library interprets
1243 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
1244 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
1245 the content type as defined in the SSL 3.0/TLS 1.0 protocol
1246 specification (change_cipher_spec(20), alert(21), handshake(22)).
1247 'buf' and 'len' point to the actual message, 'ssl' to the
1248 SSL object, and 'arg' is the application-defined value set by
1249 SSL[_CTX]_set_msg_callback_arg().
1251 'openssl s_client' and 'openssl s_server' have new '-msg' options
1252 to enable a callback that displays all protocol messages.
1255 *) Change the shared library support so shared libraries are built as
1256 soon as the corresponding static library is finished, and thereby get
1257 openssl and the test programs linked against the shared library.
1258 This still only happens when the keyword "shard" has been given to
1259 the configuration scripts.
1261 NOTE: shared library support is still an experimental thing, and
1262 backward binary compatibility is still not guaranteed.
1263 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
1265 *) Add support for Subject Information Access extension.
1266 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
1268 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
1269 additional bytes when new memory had to be allocated, not just
1270 when reusing an existing buffer.
1273 *) New command line and configuration option 'utf8' for the req command.
1274 This allows field values to be specified as UTF8 strings.
1277 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
1278 runs for the former and machine-readable output for the latter.
1281 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
1282 of the e-mail address in the DN (i.e., it will go into a certificate
1283 extension only). The new configuration file option 'email_in_dn = no'
1284 has the same effect.
1285 [Massimiliano Pala madwolf@openca.org]
1287 *) Change all functions with names starting with des_ to be starting
1288 with DES_ instead. Add wrappers that are compatible with libdes,
1289 but are named _ossl_old_des_*. Finally, add macros that map the
1290 des_* symbols to the corresponding _ossl_old_des_* if libdes
1291 compatibility is desired. If OpenSSL 0.9.6c compatibility is
1292 desired, the des_* symbols will be mapped to DES_*, with one
1295 Since we provide two compatibility mappings, the user needs to
1296 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
1297 compatibility is desired. The default (i.e., when that macro
1298 isn't defined) is OpenSSL 0.9.6c compatibility.
1300 There are also macros that enable and disable the support of old
1301 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
1302 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
1303 are defined, the default will apply: to support the old des routines.
1305 In either case, one must include openssl/des.h to get the correct
1306 definitions. Do not try to just include openssl/des_old.h, that
1309 NOTE: This is a major break of an old API into a new one. Software
1310 authors are encouraged to switch to the DES_ style functions. Some
1311 time in the future, des_old.h and the libdes compatibility functions
1312 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
1313 default), and then completely removed.
1316 *) Test for certificates which contain unsupported critical extensions.
1317 If such a certificate is found during a verify operation it is
1318 rejected by default: this behaviour can be overridden by either
1319 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
1320 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
1321 X509_supported_extension() has also been added which returns 1 if a
1322 particular extension is supported.
1325 *) Modify the behaviour of EVP cipher functions in similar way to digests
1326 to retain compatibility with existing code.
1329 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
1330 compatibility with existing code. In particular the 'ctx' parameter does
1331 not have to be to be initialized before the call to EVP_DigestInit() and
1332 it is tidied up after a call to EVP_DigestFinal(). New function
1333 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
1334 EVP_MD_CTX_copy() changed to not require the destination to be
1335 initialized valid and new function EVP_MD_CTX_copy_ex() added which
1336 requires the destination to be valid.
1338 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
1339 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
1342 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
1343 so that complete 'Handshake' protocol structures are kept in memory
1344 instead of overwriting 'msg_type' and 'length' with 'body' data.
1347 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
1348 [Massimo Santin via Richard Levitte]
1350 *) Major restructuring to the underlying ENGINE code. This includes
1351 reduction of linker bloat, separation of pure "ENGINE" manipulation
1352 (initialisation, etc) from functionality dealing with implementations
1353 of specific crypto iterfaces. This change also introduces integrated
1354 support for symmetric ciphers and digest implementations - so ENGINEs
1355 can now accelerate these by providing EVP_CIPHER and EVP_MD
1356 implementations of their own. This is detailed in crypto/engine/README
1357 as it couldn't be adequately described here. However, there are a few
1358 API changes worth noting - some RSA, DSA, DH, and RAND functions that
1359 were changed in the original introduction of ENGINE code have now
1360 reverted back - the hooking from this code to ENGINE is now a good
1361 deal more passive and at run-time, operations deal directly with
1362 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
1363 dereferencing through an ENGINE pointer any more. Also, the ENGINE
1364 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
1365 they were not being used by the framework as there is no concept of a
1366 BIGNUM_METHOD and they could not be generalised to the new
1367 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
1368 ENGINE_cpy() has been removed as it cannot be consistently defined in
1372 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
1375 *) Change mkdef.pl to sort symbols that get the same entry number,
1376 and make sure the automatically generated functions ERR_load_*
1377 become part of libeay.num as well.
1380 *) New function SSL_renegotiate_pending(). This returns true once
1381 renegotiation has been requested (either SSL_renegotiate() call
1382 or HelloRequest/ClientHello receveived from the peer) and becomes
1383 false once a handshake has been completed.
1384 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
1385 sends a HelloRequest, but does not ensure that a handshake takes
1386 place. SSL_renegotiate_pending() is useful for checking if the
1387 client has followed the request.)
1390 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
1391 By default, clients may request session resumption even during
1392 renegotiation (if session ID contexts permit); with this option,
1393 session resumption is possible only in the first handshake.
1395 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
1396 more bits available for options that should not be part of
1397 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
1400 *) Add some demos for certificate and certificate request creation.
1403 *) Make maximum certificate chain size accepted from the peer application
1404 settable (SSL*_get/set_max_cert_list()), as proposed by
1405 "Douglas E. Engert" <deengert@anl.gov>.
1408 *) Add support for shared libraries for Unixware-7
1409 (Boyd Lynn Gerber <gerberb@zenez.com>).
1412 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
1413 be done prior to destruction. Use this to unload error strings from
1414 ENGINEs that load their own error strings. NB: This adds two new API
1415 functions to "get" and "set" this destroy handler in an ENGINE.
1418 *) Alter all existing ENGINE implementations (except "openssl" and
1419 "openbsd") to dynamically instantiate their own error strings. This
1420 makes them more flexible to be built both as statically-linked ENGINEs
1421 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
1422 Also, add stub code to each that makes building them as self-contained
1423 shared-libraries easier (see README.ENGINE).
1426 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
1427 implementations into applications that are completely implemented in
1428 self-contained shared-libraries. The "dynamic" ENGINE exposes control
1429 commands that can be used to configure what shared-library to load and
1430 to control aspects of the way it is handled. Also, made an update to
1431 the README.ENGINE file that brings its information up-to-date and
1432 provides some information and instructions on the "dynamic" ENGINE
1433 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
1436 *) Make it possible to unload ranges of ERR strings with a new
1437 "ERR_unload_strings" function.
1440 *) Add a copy() function to EVP_MD.
1443 *) Make EVP_MD routines take a context pointer instead of just the
1444 md_data void pointer.
1447 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
1448 that the digest can only process a single chunk of data
1449 (typically because it is provided by a piece of
1450 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
1451 is only going to provide a single chunk of data, and hence the
1452 framework needn't accumulate the data for oneshot drivers.
1455 *) As with "ERR", make it possible to replace the underlying "ex_data"
1456 functions. This change also alters the storage and management of global
1457 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
1458 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
1459 index counters. The API functions that use this state have been changed
1460 to take a "class_index" rather than pointers to the class's local STACK
1461 and counter, and there is now an API function to dynamically create new
1462 classes. This centralisation allows us to (a) plug a lot of the
1463 thread-safety problems that existed, and (b) makes it possible to clean
1464 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
1465 such data would previously have always leaked in application code and
1466 workarounds were in place to make the memory debugging turn a blind eye
1467 to it. Application code that doesn't use this new function will still
1468 leak as before, but their memory debugging output will announce it now
1469 rather than letting it slide.
1471 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
1472 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
1473 has a return value to indicate success or failure.
1476 *) Make it possible to replace the underlying "ERR" functions such that the
1477 global state (2 LHASH tables and 2 locks) is only used by the "default"
1478 implementation. This change also adds two functions to "get" and "set"
1479 the implementation prior to it being automatically set the first time
1480 any other ERR function takes place. Ie. an application can call "get",
1481 pass the return value to a module it has just loaded, and that module
1482 can call its own "set" function using that value. This means the
1483 module's "ERR" operations will use (and modify) the error state in the
1484 application and not in its own statically linked copy of OpenSSL code.
1487 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
1488 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
1489 the operation, and provides a more encapsulated way for external code
1490 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
1491 to use these functions rather than manually incrementing the counts.
1493 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
1496 *) Add EVP test program.
1499 *) Add symmetric cipher support to ENGINE. Expect the API to change!
1502 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
1503 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
1504 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
1505 These allow a CRL to be built without having to access X509_CRL fields
1506 directly. Modify 'ca' application to use new functions.
1509 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
1510 bug workarounds. Rollback attack detection is a security feature.
1511 The problem will only arise on OpenSSL servers when TLSv1 is not
1512 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
1513 Software authors not wanting to support TLSv1 will have special reasons
1514 for their choice and can explicitly enable this option.
1515 [Bodo Moeller, Lutz Jaenicke]
1517 *) Rationalise EVP so it can be extended: don't include a union of
1518 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
1519 (similar to those existing for EVP_CIPHER_CTX).
1524 EVP_MD_CTX_init(&md); /* new function call */
1525 EVP_DigestInit(&md, EVP_sha1());
1526 EVP_DigestUpdate(&md, in, len);
1527 EVP_DigestFinal(&md, out, NULL);
1528 EVP_MD_CTX_cleanup(&md); /* new function call */
1532 *) Make DES key schedule conform to the usual scheme, as well as
1533 correcting its structure. This means that calls to DES functions
1534 now have to pass a pointer to a des_key_schedule instead of a
1535 plain des_key_schedule (which was actually always a pointer
1538 des_key_schedule ks;
1540 des_set_key_checked(..., &ks);
1541 des_ncbc_encrypt(..., &ks, ...);
1543 (Note that a later change renames 'des_...' into 'DES_...'.)
1546 *) Initial reduction of linker bloat: the use of some functions, such as
1547 PEM causes large amounts of unused functions to be linked in due to
1548 poor organisation. For example pem_all.c contains every PEM function
1549 which has a knock on effect of linking in large amounts of (unused)
1550 ASN1 code. Grouping together similar functions and splitting unrelated
1551 functions prevents this.
1554 *) Cleanup of EVP macros.
1557 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
1558 correct _ecb suffix.
1561 *) Add initial OCSP responder support to ocsp application. The
1562 revocation information is handled using the text based index
1563 use by the ca application. The responder can either handle
1564 requests generated internally, supplied in files (for example
1565 via a CGI script) or using an internal minimal server.
1568 *) Add configuration choices to get zlib compression for TLS.
1571 *) Changes to Kerberos SSL for RFC 2712 compliance:
1572 1. Implemented real KerberosWrapper, instead of just using
1573 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
1574 2. Implemented optional authenticator field of KerberosWrapper.
1576 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
1577 and authenticator structs; see crypto/krb5/.
1579 Generalized Kerberos calls to support multiple Kerberos libraries.
1580 [Vern Staats <staatsvr@asc.hpc.mil>,
1581 Jeffrey Altman <jaltman@columbia.edu>
1582 via Richard Levitte]
1584 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
1585 already does with RSA. testdsa.h now has 'priv_key/pub_key'
1586 values for each of the key sizes rather than having just
1587 parameters (and 'speed' generating keys each time).
1590 *) Speed up EVP routines.
1593 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
1594 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
1595 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
1596 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
1598 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
1599 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
1600 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
1603 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
1605 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
1608 *) Added the OS2-EMX target.
1609 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
1611 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
1612 to support NCONF routines in extension code. New function CONF_set_nconf()
1613 to allow functions which take an NCONF to also handle the old LHASH
1614 structure: this means that the old CONF compatible routines can be
1615 retained (in particular wrt extensions) without having to duplicate the
1616 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
1619 *) Enhance the general user interface with mechanisms for inner control
1620 and with possibilities to have yes/no kind of prompts.
1623 *) Change all calls to low level digest routines in the library and
1624 applications to use EVP. Add missing calls to HMAC_cleanup() and
1625 don't assume HMAC_CTX can be copied using memcpy().
1626 [Verdon Walker <VWalker@novell.com>, Steve Henson]
1628 *) Add the possibility to control engines through control names but with
1629 arbitrary arguments instead of just a string.
1630 Change the key loaders to take a UI_METHOD instead of a callback
1631 function pointer. NOTE: this breaks binary compatibility with earlier
1632 versions of OpenSSL [engine].
1633 Adapt the nCipher code for these new conditions and add a card insertion
1637 *) Enhance the general user interface with mechanisms to better support
1638 dialog box interfaces, application-defined prompts, the possibility
1639 to use defaults (for example default passwords from somewhere else)
1640 and interrupts/cancellations.
1643 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
1644 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
1647 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
1648 tidy up some unnecessarily weird code in 'sk_new()').
1649 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
1651 *) Change the key loading routines for ENGINEs to use the same kind
1652 callback (pem_password_cb) as all other routines that need this
1656 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
1657 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
1658 than this minimum value is recommended.
1661 *) New random seeder for OpenVMS, using the system process statistics
1662 that are easily reachable.
1665 *) Windows apparently can't transparently handle global
1666 variables defined in DLLs. Initialisations such as:
1668 const ASN1_ITEM *it = &ASN1_INTEGER_it;
1670 wont compile. This is used by the any applications that need to
1671 declare their own ASN1 modules. This was fixed by adding the option
1672 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
1673 needed for static libraries under Win32.
1676 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
1677 setting of purpose and trust fields. New X509_STORE trust and
1678 purpose functions and tidy up setting in other SSL functions.
1681 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
1682 structure. These are inherited by X509_STORE_CTX when it is
1683 initialised. This allows various defaults to be set in the
1684 X509_STORE structure (such as flags for CRL checking and custom
1685 purpose or trust settings) for functions which only use X509_STORE_CTX
1686 internally such as S/MIME.
1688 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
1689 trust settings if they are not set in X509_STORE. This allows X509_STORE
1690 purposes and trust (in S/MIME for example) to override any set by default.
1692 Add command line options for CRL checking to smime, s_client and s_server
1696 *) Initial CRL based revocation checking. If the CRL checking flag(s)
1697 are set then the CRL is looked up in the X509_STORE structure and
1698 its validity and signature checked, then if the certificate is found
1699 in the CRL the verify fails with a revoked error.
1701 Various new CRL related callbacks added to X509_STORE_CTX structure.
1703 Command line options added to 'verify' application to support this.
1705 This needs some additional work, such as being able to handle multiple
1706 CRLs with different times, extension based lookup (rather than just
1707 by subject name) and ultimately more complete V2 CRL extension
1711 *) Add a general user interface API (crypto/ui/). This is designed
1712 to replace things like des_read_password and friends (backward
1713 compatibility functions using this new API are provided).
1714 The purpose is to remove prompting functions from the DES code
1715 section as well as provide for prompting through dialog boxes in
1716 a window system and the like.
1719 *) Add "ex_data" support to ENGINE so implementations can add state at a
1720 per-structure level rather than having to store it globally.
1723 *) Make it possible for ENGINE structures to be copied when retrieved by
1724 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
1725 This causes the "original" ENGINE structure to act like a template,
1726 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
1727 operational state can be localised to each ENGINE structure, despite the
1728 fact they all share the same "methods". New ENGINE structures returned in
1729 this case have no functional references and the return value is the single
1730 structural reference. This matches the single structural reference returned
1731 by ENGINE_by_id() normally, when it is incremented on the pre-existing
1735 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
1736 needs to match any other type at all we need to manually clear the
1740 *) Changes to the "openssl engine" utility to include;
1741 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
1742 about an ENGINE's available control commands.
1743 - executing control commands from command line arguments using the
1744 '-pre' and '-post' switches. '-post' is only used if '-t' is
1745 specified and the ENGINE is successfully initialised. The syntax for
1746 the individual commands are colon-separated, for example;
1747 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
1750 *) New dynamic control command support for ENGINEs. ENGINEs can now
1751 declare their own commands (numbers), names (strings), descriptions,
1752 and input types for run-time discovery by calling applications. A
1753 subset of these commands are implicitly classed as "executable"
1754 depending on their input type, and only these can be invoked through
1755 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
1756 can be based on user input, config files, etc). The distinction is
1757 that "executable" commands cannot return anything other than a boolean
1758 result and can only support numeric or string input, whereas some
1759 discoverable commands may only be for direct use through
1760 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
1761 pointers, or other custom uses. The "executable" commands are to
1762 support parameterisations of ENGINE behaviour that can be
1763 unambiguously defined by ENGINEs and used consistently across any
1764 OpenSSL-based application. Commands have been added to all the
1765 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
1766 control over shared-library paths without source code alterations.
1769 *) Changed all ENGINE implementations to dynamically allocate their
1770 ENGINEs rather than declaring them statically. Apart from this being
1771 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
1772 this also allows the implementations to compile without using the
1773 internal engine_int.h header.
1776 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
1777 'const' value. Any code that should be able to modify a RAND_METHOD
1778 should already have non-const pointers to it (ie. they should only
1779 modify their own ones).
1782 *) Made a variety of little tweaks to the ENGINE code.
1783 - "atalla" and "ubsec" string definitions were moved from header files
1784 to C code. "nuron" string definitions were placed in variables
1785 rather than hard-coded - allowing parameterisation of these values
1786 later on via ctrl() commands.
1787 - Removed unused "#if 0"'d code.
1788 - Fixed engine list iteration code so it uses ENGINE_free() to release
1789 structural references.
1790 - Constified the RAND_METHOD element of ENGINE structures.
1791 - Constified various get/set functions as appropriate and added
1792 missing functions (including a catch-all ENGINE_cpy that duplicates
1793 all ENGINE values onto a new ENGINE except reference counts/state).
1794 - Removed NULL parameter checks in get/set functions. Setting a method
1795 or function to NULL is a way of cancelling out a previously set
1796 value. Passing a NULL ENGINE parameter is just plain stupid anyway
1797 and doesn't justify the extra error symbols and code.
1798 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
1799 flags from engine_int.h to engine.h.
1800 - Changed prototypes for ENGINE handler functions (init(), finish(),
1801 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
1804 *) Implement binary inversion algorithm for BN_mod_inverse in addition
1805 to the algorithm using long division. The binary algorithm can be
1806 used only if the modulus is odd. On 32-bit systems, it is faster
1807 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
1808 roughly 5-15% for 256-bit moduli), so we use it only for moduli
1809 up to 450 bits. In 64-bit environments, the binary algorithm
1810 appears to be advantageous for much longer moduli; here we use it
1811 for moduli up to 2048 bits.
1814 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
1815 could not support the combine flag in choice fields.
1818 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
1819 extensions from a certificate request to the certificate.
1822 *) Allow multiple 'certopt' and 'nameopt' options to be separated
1823 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
1824 file: this allows the display of the certificate about to be
1825 signed to be customised, to allow certain fields to be included
1826 or excluded and extension details. The old system didn't display
1827 multicharacter strings properly, omitted fields not in the policy
1828 and couldn't display additional details such as extensions.
1831 *) Function EC_POINTs_mul for multiple scalar multiplication
1832 of an arbitrary number of elliptic curve points
1833 \sum scalars[i]*points[i],
1834 optionally including the generator defined for the EC_GROUP:
1835 scalar*generator + \sum scalars[i]*points[i].
1837 EC_POINT_mul is a simple wrapper function for the typical case
1838 that the point list has just one item (besides the optional
1842 *) First EC_METHODs for curves over GF(p):
1844 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
1845 operations and provides various method functions that can also
1846 operate with faster implementations of modular arithmetic.
1848 EC_GFp_mont_method() reuses most functions that are part of
1849 EC_GFp_simple_method, but uses Montgomery arithmetic.
1851 [Bodo Moeller; point addition and point doubling
1852 implementation directly derived from source code provided by
1853 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
1855 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
1856 crypto/ec/ec_lib.c):
1858 Curves are EC_GROUP objects (with an optional group generator)
1859 based on EC_METHODs that are built into the library.
1861 Points are EC_POINT objects based on EC_GROUP objects.
1863 Most of the framework would be able to handle curves over arbitrary
1864 finite fields, but as there are no obvious types for fields other
1865 than GF(p), some functions are limited to that for now.
1868 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
1869 that the file contains a complete HTTP response.
1872 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
1873 change the def and num file printf format specifier from "%-40sXXX"
1874 to "%-39s XXX". The latter will always guarantee a space after the
1875 field while the former will cause them to run together if the field
1876 is 40 of more characters long.
1879 *) Constify the cipher and digest 'method' functions and structures
1880 and modify related functions to take constant EVP_MD and EVP_CIPHER
1884 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
1885 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
1888 *) Modify EVP_Digest*() routines so they now return values. Although the
1889 internal software routines can never fail additional hardware versions
1893 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
1895 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
1896 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
1899 ERR_R_NESTED_ASN1_ERROR
1901 ERR_R_MISSING_ASN1_EOS
1902 were 4 .. 9, conflicting with
1903 ERR_LIB_RSA (= ERR_R_RSA_LIB)
1905 ERR_LIB_PEM (= ERR_R_PEM_LIB).
1906 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
1908 Add new error code 'ERR_R_INTERNAL_ERROR'.
1911 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
1915 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
1916 sets the subject name for a new request or supersedes the
1917 subject name in a given request. Formats that can be parsed are
1918 'CN=Some Name, OU=myOU, C=IT'
1920 'CN=Some Name/OU=myOU/C=IT'.
1922 Add options '-batch' and '-verbose' to 'openssl req'.
1923 [Massimiliano Pala <madwolf@hackmasters.net>]
1925 *) Introduce the possibility to access global variables through
1926 functions on platform were that's the best way to handle exporting
1927 global variables in shared libraries. To enable this functionality,
1928 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
1929 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
1930 is normally done by Configure or something similar).
1932 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
1933 in the source file (foo.c) like this:
1935 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
1936 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
1938 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
1939 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
1941 OPENSSL_DECLARE_GLOBAL(int,foo);
1942 #define foo OPENSSL_GLOBAL_REF(foo)
1943 OPENSSL_DECLARE_GLOBAL(double,bar);
1944 #define bar OPENSSL_GLOBAL_REF(bar)
1946 The #defines are very important, and therefore so is including the
1947 header file everywhere where the defined globals are used.
1949 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
1950 of ASN.1 items, but that structure is a bit different.
1952 The largest change is in util/mkdef.pl which has been enhanced with
1953 better and easier to understand logic to choose which symbols should
1954 go into the Windows .def files as well as a number of fixes and code
1955 cleanup (among others, algorithm keywords are now sorted
1956 lexicographically to avoid constant rewrites).
1959 *) In BN_div() keep a copy of the sign of 'num' before writing the
1960 result to 'rm' because if rm==num the value will be overwritten
1961 and produce the wrong result if 'num' is negative: this caused
1962 problems with BN_mod() and BN_nnmod().
1965 *) Function OCSP_request_verify(). This checks the signature on an
1966 OCSP request and verifies the signer certificate. The signer
1967 certificate is just checked for a generic purpose and OCSP request
1971 *) Add OCSP_check_validity() function to check the validity of OCSP
1972 responses. OCSP responses are prepared in real time and may only
1973 be a few seconds old. Simply checking that the current time lies
1974 between thisUpdate and nextUpdate max reject otherwise valid responses
1975 caused by either OCSP responder or client clock inaccuracy. Instead
1976 we allow thisUpdate and nextUpdate to fall within a certain period of
1977 the current time. The age of the response can also optionally be
1978 checked. Two new options -validity_period and -status_age added to
1982 *) If signature or public key algorithm is unrecognized print out its
1983 OID rather that just UNKNOWN.
1986 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
1987 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
1988 ID to be generated from the issuer certificate alone which can then be
1989 passed to OCSP_id_issuer_cmp().
1992 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
1993 ASN1 modules to export functions returning ASN1_ITEM pointers
1994 instead of the ASN1_ITEM structures themselves. This adds several
1995 new macros which allow the underlying ASN1 function/structure to
1996 be accessed transparently. As a result code should not use ASN1_ITEM
1997 references directly (such as &X509_it) but instead use the relevant
1998 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
1999 use of the new ASN1 code on platforms where exporting structures
2000 is problematical (for example in shared libraries) but exporting
2001 functions returning pointers to structures is not.
2004 *) Add support for overriding the generation of SSL/TLS session IDs.
2005 These callbacks can be registered either in an SSL_CTX or per SSL.
2006 The purpose of this is to allow applications to control, if they wish,
2007 the arbitrary values chosen for use as session IDs, particularly as it
2008 can be useful for session caching in multiple-server environments. A
2009 command-line switch for testing this (and any client code that wishes
2010 to use such a feature) has been added to "s_server".
2011 [Geoff Thorpe, Lutz Jaenicke]
2013 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
2014 of the form '#if defined(...) || defined(...) || ...' and
2015 '#if !defined(...) && !defined(...) && ...'. This also avoids
2016 the growing number of special cases it was previously handling.
2019 *) Make all configuration macros available for application by making
2020 sure they are available in opensslconf.h, by giving them names starting
2021 with "OPENSSL_" to avoid conflicts with other packages and by making
2022 sure e_os2.h will cover all platform-specific cases together with
2024 Additionally, it is now possible to define configuration/platform-
2025 specific names (called "system identities"). In the C code, these
2026 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
2027 macro with the name beginning with "OPENSSL_SYS_", which is determined
2028 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
2032 *) New option -set_serial to 'req' and 'x509' this allows the serial
2033 number to use to be specified on the command line. Previously self
2034 signed certificates were hard coded with serial number 0 and the
2035 CA options of 'x509' had to use a serial number in a file which was
2039 *) New options to 'ca' utility to support V2 CRL entry extensions.
2040 Currently CRL reason, invalidity date and hold instruction are
2041 supported. Add new CRL extensions to V3 code and some new objects.
2044 *) New function EVP_CIPHER_CTX_set_padding() this is used to
2045 disable standard block padding (aka PKCS#5 padding) in the EVP
2046 API, which was previously mandatory. This means that the data is
2047 not padded in any way and so the total length much be a multiple
2048 of the block size, otherwise an error occurs.
2051 *) Initial (incomplete) OCSP SSL support.
2054 *) New function OCSP_parse_url(). This splits up a URL into its host,
2055 port and path components: primarily to parse OCSP URLs. New -url
2056 option to ocsp utility.
2059 *) New nonce behavior. The return value of OCSP_check_nonce() now
2060 reflects the various checks performed. Applications can decide
2061 whether to tolerate certain situations such as an absent nonce
2062 in a response when one was present in a request: the ocsp application
2063 just prints out a warning. New function OCSP_add1_basic_nonce()
2064 this is to allow responders to include a nonce in a response even if
2065 the request is nonce-less.
2068 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
2069 skipped when using openssl x509 multiple times on a single input file,
2070 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
2073 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
2074 set string type: to handle setting ASN1_TIME structures. Fix ca
2075 utility to correctly initialize revocation date of CRLs.
2078 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
2079 the clients preferred ciphersuites and rather use its own preferences.
2080 Should help to work around M$ SGC (Server Gated Cryptography) bug in
2081 Internet Explorer by ensuring unchanged hash method during stepup.
2082 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
2085 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
2086 to aes and add a new 'exist' option to print out symbols that don't
2090 *) Additional options to ocsp utility to allow flags to be set and
2091 additional certificates supplied.
2094 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
2095 OCSP client a number of certificate to only verify the response
2099 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
2100 handle the new API. Currently only ECB, CBC modes supported. Add new
2103 Add TLS AES ciphersuites as described in RFC3268, "Advanced
2104 Encryption Standard (AES) Ciphersuites for Transport Layer
2105 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
2106 not enabled by default and were not part of the "ALL" ciphersuite
2107 alias because they were not yet official; they could be
2108 explicitly requested by specifying the "AESdraft" ciphersuite
2109 group alias. In the final release of OpenSSL 0.9.7, the group
2110 alias is called "AES" and is part of "ALL".)
2111 [Ben Laurie, Steve Henson, Bodo Moeller]
2113 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
2114 request to response.
2117 *) Functions for OCSP responders. OCSP_request_onereq_count(),
2118 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
2119 extract information from a certificate request. OCSP_response_create()
2120 creates a response and optionally adds a basic response structure.
2121 OCSP_basic_add1_status() adds a complete single response to a basic
2122 response and returns the OCSP_SINGLERESP structure just added (to allow
2123 extensions to be included for example). OCSP_basic_add1_cert() adds a
2124 certificate to a basic response and OCSP_basic_sign() signs a basic
2125 response with various flags. New helper functions ASN1_TIME_check()
2126 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
2127 (converts ASN1_TIME to GeneralizedTime).
2130 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
2131 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
2132 structure from a certificate. X509_pubkey_digest() digests the public_key
2133 contents: this is used in various key identifiers.
2136 *) Make sk_sort() tolerate a NULL argument.
2137 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
2139 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
2140 passed by the function are trusted implicitly. If any of them signed the
2141 response then it is assumed to be valid and is not verified.
2144 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
2145 to data. This was previously part of the PKCS7 ASN1 code. This
2146 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
2147 [Steve Henson, reported by Kenneth R. Robinette
2148 <support@securenetterm.com>]
2150 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
2151 routines: without these tracing memory leaks is very painful.
2152 Fix leaks in PKCS12 and PKCS7 routines.
2155 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
2156 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
2157 effectively meant GeneralizedTime would never be used. Now it
2158 is initialised to -1 but X509_time_adj() now has to check the value
2159 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
2160 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
2161 [Steve Henson, reported by Kenneth R. Robinette
2162 <support@securenetterm.com>]
2164 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
2165 result in a zero length in the ASN1_INTEGER structure which was
2166 not consistent with the structure when d2i_ASN1_INTEGER() was used
2167 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
2168 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
2169 where it did not print out a minus for negative ASN1_INTEGER.
2172 *) Add summary printout to ocsp utility. The various functions which
2173 convert status values to strings have been renamed to:
2174 OCSP_response_status_str(), OCSP_cert_status_str() and
2175 OCSP_crl_reason_str() and are no longer static. New options
2176 to verify nonce values and to disable verification. OCSP response
2177 printout format cleaned up.
2180 *) Add additional OCSP certificate checks. These are those specified
2181 in RFC2560. This consists of two separate checks: the CA of the
2182 certificate being checked must either be the OCSP signer certificate
2183 or the issuer of the OCSP signer certificate. In the latter case the
2184 OCSP signer certificate must contain the OCSP signing extended key
2185 usage. This check is performed by attempting to match the OCSP
2186 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
2187 in the OCSP_CERTID structures of the response.
2190 *) Initial OCSP certificate verification added to OCSP_basic_verify()
2191 and related routines. This uses the standard OpenSSL certificate
2192 verify routines to perform initial checks (just CA validity) and
2193 to obtain the certificate chain. Then additional checks will be
2194 performed on the chain. Currently the root CA is checked to see
2195 if it is explicitly trusted for OCSP signing. This is used to set
2196 a root CA as a global signing root: that is any certificate that
2197 chains to that CA is an acceptable OCSP signing certificate.
2200 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
2201 extensions from a separate configuration file.
2202 As when reading extensions from the main configuration file,
2203 the '-extensions ...' option may be used for specifying the
2205 [Massimiliano Pala <madwolf@comune.modena.it>]
2207 *) New OCSP utility. Allows OCSP requests to be generated or
2208 read. The request can be sent to a responder and the output
2209 parsed, outputed or printed in text form. Not complete yet:
2210 still needs to check the OCSP response validity.
2213 *) New subcommands for 'openssl ca':
2214 'openssl ca -status <serial>' prints the status of the cert with
2215 the given serial number (according to the index file).
2216 'openssl ca -updatedb' updates the expiry status of certificates
2218 [Massimiliano Pala <madwolf@comune.modena.it>]
2220 *) New '-newreq-nodes' command option to CA.pl. This is like
2221 '-newreq', but calls 'openssl req' with the '-nodes' option
2222 so that the resulting key is not encrypted.
2223 [Damien Miller <djm@mindrot.org>]
2225 *) New configuration for the GNU Hurd.
2226 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
2228 *) Initial code to implement OCSP basic response verify. This
2229 is currently incomplete. Currently just finds the signer's
2230 certificate and verifies the signature on the response.
2233 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
2234 value of OPENSSLDIR. This is available via the new '-d' option
2235 to 'openssl version', and is also included in 'openssl version -a'.
2238 *) Allowing defining memory allocation callbacks that will be given
2239 file name and line number information in additional arguments
2240 (a const char* and an int). The basic functionality remains, as
2241 well as the original possibility to just replace malloc(),
2242 realloc() and free() by functions that do not know about these
2243 additional arguments. To register and find out the current
2244 settings for extended allocation functions, the following
2245 functions are provided:
2247 CRYPTO_set_mem_ex_functions
2248 CRYPTO_set_locked_mem_ex_functions
2249 CRYPTO_get_mem_ex_functions
2250 CRYPTO_get_locked_mem_ex_functions
2252 These work the same way as CRYPTO_set_mem_functions and friends.
2253 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
2254 extended allocation function is enabled.
2255 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
2256 a conventional allocation function is enabled.
2257 [Richard Levitte, Bodo Moeller]
2259 *) Finish off removing the remaining LHASH function pointer casts.
2260 There should no longer be any prototype-casting required when using
2261 the LHASH abstraction, and any casts that remain are "bugs". See
2262 the callback types and macros at the head of lhash.h for details
2263 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
2266 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
2267 If /dev/[u]random devices are not available or do not return enough
2268 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
2270 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
2271 /etc/entropy will be queried once each in this sequence, quering stops
2272 when enough entropy was collected without querying more sockets.
2275 *) Change the Unix RAND_poll() variant to be able to poll several
2276 random devices, as specified by DEVRANDOM, until a sufficient amount
2277 of data has been collected. We spend at most 10 ms on each file
2278 (select timeout) and read in non-blocking mode. DEVRANDOM now
2279 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
2280 (previously it was just the string "/dev/urandom"), so on typical
2281 platforms the 10 ms delay will never occur.
2282 Also separate out the Unix variant to its own file, rand_unix.c.
2283 For VMS, there's a currently-empty rand_vms.c.
2286 *) Move OCSP client related routines to ocsp_cl.c. These
2287 provide utility functions which an application needing
2288 to issue a request to an OCSP responder and analyse the
2289 response will typically need: as opposed to those which an
2290 OCSP responder itself would need which will be added later.
2292 OCSP_request_sign() signs an OCSP request with an API similar
2293 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
2294 response. OCSP_response_get1_basic() extracts basic response
2295 from response. OCSP_resp_find_status(): finds and extracts status
2296 information from an OCSP_CERTID structure (which will be created
2297 when the request structure is built). These are built from lower
2298 level functions which work on OCSP_SINGLERESP structures but
2299 wont normally be used unless the application wishes to examine
2300 extensions in the OCSP response for example.
2302 Replace nonce routines with a pair of functions.
2303 OCSP_request_add1_nonce() adds a nonce value and optionally
2304 generates a random value. OCSP_check_nonce() checks the
2305 validity of the nonce in an OCSP response.
2308 *) Change function OCSP_request_add() to OCSP_request_add0_id().
2309 This doesn't copy the supplied OCSP_CERTID and avoids the
2310 need to free up the newly created id. Change return type
2311 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
2312 This can then be used to add extensions to the request.
2313 Deleted OCSP_request_new(), since most of its functionality
2314 is now in OCSP_REQUEST_new() (and the case insensitive name
2315 clash) apart from the ability to set the request name which
2316 will be added elsewhere.
2319 *) Update OCSP API. Remove obsolete extensions argument from
2320 various functions. Extensions are now handled using the new
2321 OCSP extension code. New simple OCSP HTTP function which
2322 can be used to send requests and parse the response.
2325 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
2326 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
2327 uses the special reorder version of SET OF to sort the attributes
2328 and reorder them to match the encoded order. This resolves a long
2329 standing problem: a verify on a PKCS7 structure just after signing
2330 it used to fail because the attribute order did not match the
2331 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
2332 it uses the received order. This is necessary to tolerate some broken
2333 software that does not order SET OF. This is handled by encoding
2334 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
2335 to produce the required SET OF.
2338 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
2339 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
2340 files to get correct declarations of the ASN.1 item variables.
2343 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
2344 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
2345 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
2346 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
2347 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
2348 ASN1_ITEM and no wrapper functions.
2351 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
2352 replace the old function pointer based I/O routines. Change most of
2353 the *_d2i_bio() and *_d2i_fp() functions to use these.
2356 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
2357 lines, recognice more "algorithms" that can be deselected, and make
2358 it complain about algorithm deselection that isn't recognised.
2361 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
2362 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
2363 to use new functions. Add NO_ASN1_OLD which can be set to remove
2364 some old style ASN1 functions: this can be used to determine if old
2365 code will still work when these eventually go away.
2368 *) New extension functions for OCSP structures, these follow the
2369 same conventions as certificates and CRLs.
2372 *) New function X509V3_add1_i2d(). This automatically encodes and
2373 adds an extension. Its behaviour can be customised with various
2374 flags to append, replace or delete. Various wrappers added for
2375 certifcates and CRLs.
2378 *) Fix to avoid calling the underlying ASN1 print routine when
2379 an extension cannot be parsed. Correct a typo in the
2380 OCSP_SERVICELOC extension. Tidy up print OCSP format.
2383 *) Make mkdef.pl parse some of the ASN1 macros and add apropriate
2384 entries for variables.
2387 *) Add functionality to apps/openssl.c for detecting locking
2388 problems: As the program is single-threaded, all we have
2389 to do is register a locking callback using an array for
2390 storing which locks are currently held by the program.
2393 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
2394 SSL_get_ex_data_X509_STORE_idx(), which is used in
2395 ssl_verify_cert_chain() and thus can be called at any time
2396 during TLS/SSL handshakes so that thread-safety is essential.
2397 Unfortunately, the ex_data design is not at all suited
2398 for multi-threaded use, so it probably should be abolished.
2401 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
2402 [Broadcom, tweaked and integrated by Geoff Thorpe]
2404 *) Move common extension printing code to new function
2405 X509V3_print_extensions(). Reorganise OCSP print routines and
2406 implement some needed OCSP ASN1 functions. Add OCSP extensions.
2409 *) New function X509_signature_print() to remove duplication in some
2413 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
2414 set (this was treated exactly the same as SET OF previously). This
2415 is used to reorder the STACK representing the structure to match the
2416 encoding. This will be used to get round a problem where a PKCS7
2417 structure which was signed could not be verified because the STACK
2418 order did not reflect the encoded order.
2421 *) Reimplement the OCSP ASN1 module using the new code.
2424 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
2425 for its ASN1 operations. The old style function pointers still exist
2426 for now but they will eventually go away.
2429 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
2430 completely replaces the old ASN1 functionality with a table driven
2431 encoder and decoder which interprets an ASN1_ITEM structure describing
2432 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
2433 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
2434 has also been converted to the new form.
2437 *) Change BN_mod_exp_recp so that negative moduli are tolerated
2438 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
2439 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
2440 for negative moduli.
2443 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
2444 of not touching the result's sign bit.
2447 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
2451 *) Changed the LHASH code to use prototypes for callbacks, and created
2452 macros to declare and implement thin (optionally static) functions
2453 that provide type-safety and avoid function pointer casting for the
2454 type-specific callbacks.
2457 *) Added Kerberos Cipher Suites to be used with TLS, as written in
2459 [Veers Staats <staatsvr@asc.hpc.mil>,
2460 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
2462 *) Reformat the FAQ so the different questions and answers can be divided
2463 in sections depending on the subject.
2466 *) Have the zlib compression code load ZLIB.DLL dynamically under
2470 *) New function BN_mod_sqrt for computing square roots modulo a prime
2471 (using the probabilistic Tonelli-Shanks algorithm unless
2472 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
2473 be handled deterministically).
2474 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
2476 *) Make BN_mod_inverse faster by explicitly handling small quotients
2477 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
2478 512 bits], about 30% for larger ones [1024 or 2048 bits].)
2481 *) New function BN_kronecker.
2484 *) Fix BN_gcd so that it works on negative inputs; the result is
2485 positive unless both parameters are zero.
2486 Previously something reasonably close to an infinite loop was
2487 possible because numbers could be growing instead of shrinking
2488 in the implementation of Euclid's algorithm.
2491 *) Fix BN_is_word() and BN_is_one() macros to take into account the
2492 sign of the number in question.
2494 Fix BN_is_word(a,w) to work correctly for w == 0.
2496 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
2497 because its test if the absolute value of 'a' equals 'w'.
2498 Note that BN_abs_is_word does *not* handle w == 0 reliably;
2499 it exists mostly for use in the implementations of BN_is_zero(),
2500 BN_is_one(), and BN_is_word().
2503 *) New function BN_swap.
2506 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
2507 the exponentiation functions are more likely to produce reasonable
2508 results on negative inputs.
2511 *) Change BN_mod_mul so that the result is always non-negative.
2512 Previously, it could be negative if one of the factors was negative;
2513 I don't think anyone really wanted that behaviour.
2516 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
2517 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
2518 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
2519 and add new functions:
2528 BN_mod_lshift1_quick
2532 These functions always generate non-negative results.
2534 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
2535 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
2537 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
2538 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
2539 be reduced modulo m.
2540 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
2543 The following entry accidentily appeared in the CHANGES file
2544 distributed with OpenSSL 0.9.7. The modifications described in
2545 it do *not* apply to OpenSSL 0.9.7.
2547 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
2548 was actually never needed) and in BN_mul(). The removal in BN_mul()
2549 required a small change in bn_mul_part_recursive() and the addition
2550 of the functions bn_cmp_part_words(), bn_sub_part_words() and
2551 bn_add_part_words(), which do the same thing as bn_cmp_words(),
2552 bn_sub_words() and bn_add_words() except they take arrays with
2557 *) In 'openssl passwd', verify passwords read from the terminal
2558 unless the '-salt' option is used (which usually means that
2559 verification would just waste user's time since the resulting
2560 hash is going to be compared with some given password hash)
2561 or the new '-noverify' option is used.
2563 This is an incompatible change, but it does not affect
2564 non-interactive use of 'openssl passwd' (passwords on the command
2565 line, '-stdin' option, '-in ...' option) and thus should not
2569 *) Remove all references to RSAref, since there's no more need for it.
2572 *) Make DSO load along a path given through an environment variable
2573 (SHLIB_PATH) with shl_load().
2576 *) Constify the ENGINE code as a result of BIGNUM constification.
2577 Also constify the RSA code and most things related to it. In a
2578 few places, most notable in the depth of the ASN.1 code, ugly
2579 casts back to non-const were required (to be solved at a later
2583 *) Make it so the openssl application has all engines loaded by default.
2586 *) Constify the BIGNUM routines a little more.
2589 *) Add the following functions:
2591 ENGINE_load_cswift()
2593 ENGINE_load_atalla()
2595 ENGINE_load_builtin_engines()
2597 That way, an application can itself choose if external engines that
2598 are built-in in OpenSSL shall ever be used or not. The benefit is
2599 that applications won't have to be linked with libdl or other dso
2600 libraries unless it's really needed.
2602 Changed 'openssl engine' to load all engines on demand.
2603 Changed the engine header files to avoid the duplication of some
2604 declarations (they differed!).
2607 *) 'openssl engine' can now list capabilities.
2610 *) Better error reporting in 'openssl engine'.
2613 *) Never call load_dh_param(NULL) in s_server.
2616 *) Add engine application. It can currently list engines by name and
2617 identity, and test if they are actually available.
2620 *) Improve RPM specification file by forcing symbolic linking and making
2621 sure the installed documentation is also owned by root.root.
2622 [Damien Miller <djm@mindrot.org>]
2624 *) Give the OpenSSL applications more possibilities to make use of
2625 keys (public as well as private) handled by engines.
2628 *) Add OCSP code that comes from CertCo.
2631 *) Add VMS support for the Rijndael code.
2634 *) Added untested support for Nuron crypto accelerator.
2637 *) Add support for external cryptographic devices. This code was
2638 previously distributed separately as the "engine" branch.
2639 [Geoff Thorpe, Richard Levitte]
2641 *) Rework the filename-translation in the DSO code. It is now possible to
2642 have far greater control over how a "name" is turned into a filename
2643 depending on the operating environment and any oddities about the
2644 different shared library filenames on each system.
2647 *) Support threads on FreeBSD-elf in Configure.
2650 *) Fix for SHA1 assembly problem with MASM: it produces
2651 warnings about corrupt line number information when assembling
2652 with debugging information. This is caused by the overlapping
2654 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
2657 NCONF_get_number() has no error checking at all. As a replacement,
2658 NCONF_get_number_e() is defined (_e for "error checking") and is
2659 promoted strongly. The old NCONF_get_number is kept around for
2660 binary backward compatibility.
2661 Make it possible for methods to load from something other than a BIO,
2662 by providing a function pointer that is given a name instead of a BIO.
2663 For example, this could be used to load configuration data from an
2667 *) Fix for non blocking accept BIOs. Added new I/O special reason
2668 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
2669 with non blocking I/O was not possible because no retry code was
2670 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
2674 *) Added the beginnings of Rijndael support.
2677 *) Fix for bug in DirectoryString mask setting. Add support for
2678 X509_NAME_print_ex() in 'req' and X509_print_ex() function
2679 to allow certificate printing to more controllable, additional
2680 'certopt' option to 'x509' to allow new printing options to be
2684 *) Clean old EAY MD5 hack from e_os.h.
2687 Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
2689 *) Fix various bugs revealed by running the NISCC test suite:
2691 Stop out of bounds reads in the ASN1 code when presented with
2692 invalid tags (CAN-2003-0543 and CAN-2003-0544).
2694 If verify callback ignores invalid public key errors don't try to check
2695 certificate signature with the NULL public key.
2699 *) Fix various bugs revealed by running the NISCC test suite:
2701 Stop out of bounds reads in the ASN1 code when presented with
2702 invalid tags (CAN-2003-0543 and CAN-2003-0544).
2704 If verify callback ignores invalid public key errors don't try to check
2705 certificate signature with the NULL public key.
2709 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
2710 if the server requested one: as stated in TLS 1.0 and SSL 3.0
2714 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
2715 extra data after the compression methods not only for TLS 1.0
2716 but also for SSL 3.0 (as required by the specification).
2717 [Bodo Moeller; problem pointed out by Matthias Loepfe]
2719 *) Change X509_certificate_type() to mark the key as exported/exportable
2720 when it's 512 *bits* long, not 512 bytes.
2723 Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
2725 *) Countermeasure against the Klima-Pokorny-Rosa extension of
2726 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
2727 a protocol version number mismatch like a decryption error
2728 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
2731 *) Turn on RSA blinding by default in the default implementation
2732 to avoid a timing attack. Applications that don't want it can call
2733 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
2734 They would be ill-advised to do so in most cases.
2735 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
2737 *) Change RSA blinding code so that it works when the PRNG is not
2738 seeded (in this case, the secret RSA exponent is abused as
2739 an unpredictable seed -- if it is not unpredictable, there
2740 is no point in blinding anyway). Make RSA blinding thread-safe
2741 by remembering the creator's thread ID in rsa->blinding and
2742 having all other threads use local one-time blinding factors
2743 (this requires more computation than sharing rsa->blinding, but
2744 avoids excessive locking; and if an RSA object is not shared
2745 between threads, blinding will still be very fast).
2748 Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
2750 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
2751 via timing by performing a MAC computation even if incorrrect
2752 block cipher padding has been found. This is a countermeasure
2753 against active attacks where the attacker has to distinguish
2754 between bad padding and a MAC verification error. (CAN-2003-0078)
2756 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
2757 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
2758 Martin Vuagnoux (EPFL, Ilion)]
2760 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
2762 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
2763 memory from it's contents. This is done with a counter that will
2764 place alternating values in each byte. This can be used to solve
2765 two issues: 1) the removal of calls to memset() by highly optimizing
2766 compilers, and 2) cleansing with other values than 0, since those can
2767 be read through on certain media, for example a swap space on disk.
2770 *) Bugfix: client side session caching did not work with external caching,
2771 because the session->cipher setting was not restored when reloading
2772 from the external cache. This problem was masked, when
2773 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
2774 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
2777 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
2778 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
2779 [Zeev Lieber <zeev-l@yahoo.com>]
2781 *) Undo an undocumented change introduced in 0.9.6e which caused
2782 repeated calls to OpenSSL_add_all_ciphers() and
2783 OpenSSL_add_all_digests() to be ignored, even after calling
2787 *) Change the default configuration reader to deal with last line not
2788 being properly terminated.
2791 *) Change X509_NAME_cmp() so it applies the special rules on handling
2792 DN values that are of type PrintableString, as well as RDNs of type
2793 emailAddress where the value has the type ia5String.
2794 [stefank@valicert.com via Richard Levitte]
2796 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
2797 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
2798 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
2799 the bitwise-OR of the two for use by the majority of applications
2800 wanting this behaviour, and update the docs. The documented
2801 behaviour and actual behaviour were inconsistent and had been
2802 changing anyway, so this is more a bug-fix than a behavioural
2804 [Geoff Thorpe, diagnosed by Nadav Har'El]
2806 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
2807 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
2810 *) Fix initialization code race conditions in
2811 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
2812 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
2813 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
2814 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
2815 ssl2_get_cipher_by_char(),
2816 ssl3_get_cipher_by_char().
2817 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
2819 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
2820 the cached sessions are flushed, as the remove_cb() might use ex_data
2821 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
2822 (see [openssl.org #212]).
2823 [Geoff Thorpe, Lutz Jaenicke]
2825 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
2826 length, instead of the encoding length to d2i_ASN1_OBJECT.
2829 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
2831 *) [In 0.9.6g-engine release:]
2832 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
2833 [Lynn Gazis <lgazis@rainbow.com>]
2835 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
2837 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
2838 and get fix the header length calculation.
2839 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
2840 Alon Kantor <alonk@checkpoint.com> (and others),
2843 *) Use proper error handling instead of 'assertions' in buffer
2844 overflow checks added in 0.9.6e. This prevents DoS (the
2845 assertions could call abort()).
2846 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
2848 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
2850 *) Add various sanity checks to asn1_get_length() to reject
2851 the ASN1 length bytes if they exceed sizeof(long), will appear
2852 negative or the content length exceeds the length of the
2854 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
2856 *) Fix cipher selection routines: ciphers without encryption had no flags
2857 for the cipher strength set and where therefore not handled correctly
2858 by the selection routines (PR #130).
2861 *) Fix EVP_dsa_sha macro.
2865 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
2866 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
2867 that was added in OpenSSL 0.9.6d.
2869 As the countermeasure turned out to be incompatible with some
2870 broken SSL implementations, the new option is part of SSL_OP_ALL.
2871 SSL_OP_ALL is usually employed when compatibility with weird SSL
2872 implementations is desired (e.g. '-bugs' option to 's_client' and
2873 's_server'), so the new option is automatically set in many
2877 *) Changes in security patch:
2879 Changes marked "(CHATS)" were sponsored by the Defense Advanced
2880 Research Projects Agency (DARPA) and Air Force Research Laboratory,
2881 Air Force Materiel Command, USAF, under agreement number
2884 *) Add various sanity checks to asn1_get_length() to reject
2885 the ASN1 length bytes if they exceed sizeof(long), will appear
2886 negative or the content length exceeds the length of the
2887 supplied buffer. (CAN-2002-0659)
2888 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
2890 *) Assertions for various potential buffer overflows, not known to
2892 [Ben Laurie (CHATS)]
2894 *) Various temporary buffers to hold ASCII versions of integers were
2895 too small for 64 bit platforms. (CAN-2002-0655)
2896 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
2898 *) Remote buffer overflow in SSL3 protocol - an attacker could
2899 supply an oversized session ID to a client. (CAN-2002-0656)
2900 [Ben Laurie (CHATS)]
2902 *) Remote buffer overflow in SSL2 protocol - an attacker could
2903 supply an oversized client master key. (CAN-2002-0656)
2904 [Ben Laurie (CHATS)]
2906 Changes between 0.9.6c and 0.9.6d [9 May 2002]
2908 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
2909 encoded as NULL) with id-dsa-with-sha1.
2910 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
2912 *) Check various X509_...() return values in apps/req.c.
2913 [Nils Larsch <nla@trustcenter.de>]
2915 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
2916 an end-of-file condition would erronously be flagged, when the CRLF
2917 was just at the end of a processed block. The bug was discovered when
2918 processing data through a buffering memory BIO handing the data to a
2919 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
2920 <ptsekov@syntrex.com> and Nedelcho Stanev.
2923 *) Implement a countermeasure against a vulnerability recently found
2924 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
2925 before application data chunks to avoid the use of known IVs
2926 with data potentially chosen by the attacker.
2929 *) Fix length checks in ssl3_get_client_hello().
2932 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
2933 to prevent ssl3_read_internal() from incorrectly assuming that
2934 ssl3_read_bytes() found application data while handshake
2935 processing was enabled when in fact s->s3->in_read_app_data was
2936 merely automatically cleared during the initial handshake.
2937 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
2939 *) Fix object definitions for Private and Enterprise: they were not
2940 recognized in their shortname (=lowercase) representation. Extend
2941 obj_dat.pl to issue an error when using undefined keywords instead
2942 of silently ignoring the problem (Svenning Sorensen
2943 <sss@sss.dnsalias.net>).
2946 *) Fix DH_generate_parameters() so that it works for 'non-standard'
2947 generators, i.e. generators other than 2 and 5. (Previously, the
2948 code did not properly initialise the 'add' and 'rem' values to
2949 BN_generate_prime().)
2951 In the new general case, we do not insist that 'generator' is
2952 actually a primitive root: This requirement is rather pointless;
2953 a generator of the order-q subgroup is just as good, if not
2957 *) Map new X509 verification errors to alerts. Discovered and submitted by
2958 Tom Wu <tom@arcot.com>.
2961 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
2962 returning non-zero before the data has been completely received
2963 when using non-blocking I/O.
2964 [Bodo Moeller; problem pointed out by John Hughes]
2966 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
2967 [Ben Laurie, Lutz Jaenicke]
2969 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
2970 Yoram Zahavi <YoramZ@gilian.com>).
2973 *) Add information about CygWin 1.3 and on, and preserve proper
2974 configuration for the versions before that.
2975 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
2977 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
2978 check whether we deal with a copy of a session and do not delete from
2979 the cache in this case. Problem reported by "Izhar Shoshani Levi"
2980 <izhar@checkpoint.com>.
2983 *) Do not store session data into the internal session cache, if it
2984 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
2985 flag is set). Proposed by Aslam <aslam@funk.com>.
2988 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
2992 *) [In 0.9.6d-engine release:]
2993 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
2994 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
2996 *) Add the configuration target linux-s390x.
2997 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
2999 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
3000 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
3001 variable as an indication that a ClientHello message has been
3002 received. As the flag value will be lost between multiple
3003 invocations of ssl3_accept when using non-blocking I/O, the
3004 function may not be aware that a handshake has actually taken
3005 place, thus preventing a new session from being added to the
3008 To avoid this problem, we now set s->new_session to 2 instead of
3009 using a local variable.
3010 [Lutz Jaenicke, Bodo Moeller]
3012 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
3013 if the SSL_R_LENGTH_MISMATCH error is detected.
3014 [Geoff Thorpe, Bodo Moeller]
3016 *) New 'shared_ldflag' column in Configure platform table.
3019 *) Fix EVP_CIPHER_mode macro.
3020 ["Dan S. Camper" <dan@bti.net>]
3022 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
3023 type, we must throw them away by setting rr->length to 0.
3024 [D P Chang <dpc@qualys.com>]
3026 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
3028 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
3029 <Dominikus.Scherkl@biodata.com>. (The previous implementation
3030 worked incorrectly for those cases where range = 10..._2 and
3031 3*range is two bits longer than range.)
3034 *) Only add signing time to PKCS7 structures if it is not already
3038 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
3039 OBJ_ld_ce should be OBJ_id_ce.
3040 Also some ip-pda OIDs in crypto/objects/objects.txt were
3041 incorrect (cf. RFC 3039).
3042 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
3044 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
3045 returns early because it has nothing to do.
3046 [Andy Schneider <andy.schneider@bjss.co.uk>]
3048 *) [In 0.9.6c-engine release:]
3049 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
3050 [Andy Schneider <andy.schneider@bjss.co.uk>]
3052 *) [In 0.9.6c-engine release:]
3053 Add support for Cryptographic Appliance's keyserver technology.
3054 (Use engine 'keyclient')
3055 [Cryptographic Appliances and Geoff Thorpe]
3057 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
3058 is called via tools/c89.sh because arguments have to be
3059 rearranged (all '-L' options must appear before the first object
3061 [Richard Shapiro <rshapiro@abinitio.com>]
3063 *) [In 0.9.6c-engine release:]
3064 Add support for Broadcom crypto accelerator cards, backported
3066 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
3068 *) [In 0.9.6c-engine release:]
3069 Add support for SureWare crypto accelerator cards from
3070 Baltimore Technologies. (Use engine 'sureware')
3071 [Baltimore Technologies and Mark Cox]
3073 *) [In 0.9.6c-engine release:]
3074 Add support for crypto accelerator cards from Accelerated
3075 Encryption Processing, www.aep.ie. (Use engine 'aep')
3076 [AEP Inc. and Mark Cox]
3078 *) Add a configuration entry for gcc on UnixWare.
3079 [Gary Benson <gbenson@redhat.com>]
3081 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
3082 messages are stored in a single piece (fixed-length part and
3083 variable-length part combined) and fix various bugs found on the way.
3086 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
3087 instead. BIO_gethostbyname() does not know what timeouts are
3088 appropriate, so entries would stay in cache even when they have
3090 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
3092 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
3093 faced with a pathologically small ClientHello fragment that does
3094 not contain client_version: Instead of aborting with an error,
3095 simply choose the highest available protocol version (i.e.,
3096 TLS 1.0 unless it is disabled). In practice, ClientHello
3097 messages are never sent like this, but this change gives us
3098 strictly correct behaviour at least for TLS.
3101 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
3102 never resets s->method to s->ctx->method when called from within
3103 one of the SSL handshake functions.
3104 [Bodo Moeller; problem pointed out by Niko Baric]
3106 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
3107 (sent using the client's version number) if client_version is
3108 smaller than the protocol version in use. Also change
3109 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
3110 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
3111 the client will at least see that alert.
3114 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
3118 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
3119 client receives HelloRequest while in a handshake.
3120 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
3122 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
3123 should end in 'break', not 'goto end' which circuments various
3124 cleanups done in state SSL_ST_OK. But session related stuff
3125 must be disabled for SSL_ST_OK in the case that we just sent a
3128 Also avoid some overhead by not calling ssl_init_wbio_buffer()
3129 before just sending a HelloRequest.
3130 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
3132 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
3133 reveal whether illegal block cipher padding was found or a MAC
3134 verification error occured. (Neither SSLerr() codes nor alerts
3135 are directly visible to potential attackers, but the information
3136 may leak via logfiles.)
3138 Similar changes are not required for the SSL 2.0 implementation
3139 because the number of padding bytes is sent in clear for SSL 2.0,
3140 and the extra bytes are just ignored. However ssl/s2_pkt.c
3141 failed to verify that the purported number of padding bytes is in
3145 *) Add OpenUNIX-8 support including shared libraries
3146 (Boyd Lynn Gerber <gerberb@zenez.com>).
3149 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
3150 'wristwatch attack' using huge encoding parameters (cf.
3151 James H. Manger's CRYPTO 2001 paper). Note that the
3152 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
3153 encoding parameters and hence was not vulnerable.
3156 *) BN_sqr() bug fix.
3157 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
3159 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
3160 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
3161 followed by modular reduction.
3162 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
3164 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
3165 equivalent based on BN_pseudo_rand() instead of BN_rand().
3168 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
3169 This function was broken, as the check for a new client hello message
3170 to handle SGC did not allow these large messages.
3171 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
3174 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
3177 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
3178 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
3181 *) Rework the configuration and shared library support for Tru64 Unix.
3182 The configuration part makes use of modern compiler features and
3183 still retains old compiler behavior for those that run older versions
3184 of the OS. The shared library support part includes a variant that
3185 uses the RPATH feature, and is available through the special
3186 configuration target "alpha-cc-rpath", which will never be selected
3188 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
3190 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
3191 with the same message size as in ssl3_get_certificate_request().
3192 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
3193 messages might inadvertently be reject as too long.
3194 [Petr Lampa <lampa@fee.vutbr.cz>]
3196 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
3199 *) Modified SSL library such that the verify_callback that has been set
3200 specificly for an SSL object with SSL_set_verify() is actually being
3201 used. Before the change, a verify_callback set with this function was
3202 ignored and the verify_callback() set in the SSL_CTX at the time of
3203 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
3204 to allow the necessary settings.
3207 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
3208 explicitly to NULL, as at least on Solaris 8 this seems not always to be
3209 done automatically (in contradiction to the requirements of the C
3210 standard). This made problems when used from OpenSSH.
3213 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
3214 dh->length and always used
3216 BN_rand_range(priv_key, dh->p).
3218 BN_rand_range() is not necessary for Diffie-Hellman, and this
3219 specific range makes Diffie-Hellman unnecessarily inefficient if
3220 dh->length (recommended exponent length) is much smaller than the
3221 length of dh->p. We could use BN_rand_range() if the order of
3222 the subgroup was stored in the DH structure, but we only have
3227 BN_rand(priv_key, l, ...)
3229 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
3235 RSA_eay_public_encrypt
3236 RSA_eay_private_decrypt
3237 RSA_eay_private_encrypt (signing)
3238 RSA_eay_public_decrypt (signature verification)
3240 (default implementations for RSA_public_encrypt,
3241 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
3242 always reject numbers >= n.
3245 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
3246 to synchronize access to 'locking_thread'. This is necessary on
3247 systems where access to 'locking_thread' (an 'unsigned long'
3248 variable) is not atomic.
3251 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
3252 *before* setting the 'crypto_lock_rand' flag. The previous code had
3253 a race condition if 0 is a valid thread ID.
3254 [Travis Vitek <vitek@roguewave.com>]
3256 *) Add support for shared libraries under Irix.
3257 [Albert Chin-A-Young <china@thewrittenword.com>]
3259 *) Add configuration option to build on Linux on both big-endian and
3261 [Ralf Baechle <ralf@uni-koblenz.de>]
3263 *) Add the possibility to create shared libraries on HP-UX.
3266 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
3268 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
3269 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
3270 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
3271 PRNG state recovery was possible based on the output of
3272 one PRNG request appropriately sized to gain knowledge on
3273 'md' followed by enough consecutive 1-byte PRNG requests
3274 to traverse all of 'state'.
3276 1. When updating 'md_local' (the current thread's copy of 'md')
3277 during PRNG output generation, hash all of the previous
3278 'md_local' value, not just the half used for PRNG output.
3280 2. Make the number of bytes from 'state' included into the hash
3281 independent from the number of PRNG bytes requested.
3283 The first measure alone would be sufficient to avoid
3284 Markku-Juhani's attack. (Actually it had never occurred
3285 to me that the half of 'md_local' used for chaining was the
3286 half from which PRNG output bytes were taken -- I had always
3287 assumed that the secret half would be used.) The second
3288 measure makes sure that additional data from 'state' is never
3289 mixed into 'md_local' in small portions; this heuristically
3290 further strengthens the PRNG.
3293 *) Fix crypto/bn/asm/mips3.s.
3296 *) When only the key is given to "enc", the IV is undefined. Print out
3297 an error message in this case.
3300 *) Handle special case when X509_NAME is empty in X509 printing routines.
3303 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
3304 positive and less than q.
3307 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
3308 used: it isn't thread safe and the add_lock_callback should handle
3310 [Paul Rose <Paul.Rose@bridge.com>]
3312 *) Verify that incoming data obeys the block size in
3313 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
3317 [Ulf Möller, Bodo Möller]
3319 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
3320 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
3321 when fixing the server behaviour for backwards-compatible 'client
3322 hello' messages. (Note that the attack is impractical against
3323 SSL 3.0 and TLS 1.0 anyway because length and version checking
3324 means that the probability of guessing a valid ciphertext is
3325 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
3328 Before 0.9.5, the countermeasure (hide the error by generating a
3329 random 'decryption result') did not work properly because
3330 ERR_clear_error() was missing, meaning that SSL_get_error() would
3331 detect the supposedly ignored error.
3333 Both problems are now fixed.
3336 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
3337 (previously it was 1024).
3340 *) Fix for compatibility mode trust settings: ignore trust settings
3341 unless some valid trust or reject settings are present.
3344 *) Fix for blowfish EVP: its a variable length cipher.
3347 *) Fix various bugs related to DSA S/MIME verification. Handle missing
3348 parameters in DSA public key structures and return an error in the
3349 DSA routines if parameters are absent.
3352 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
3353 in the current directory if neither $RANDFILE nor $HOME was set.
3354 RAND_file_name() in 0.9.6a returned NULL in this case. This has
3355 caused some confusion to Windows users who haven't defined $HOME.
3356 Thus RAND_file_name() is changed again: e_os.h can define a
3357 DEFAULT_HOME, which will be used if $HOME is not set.
3358 For Windows, we use "C:"; on other platforms, we still require
3359 environment variables.
3361 *) Move 'if (!initialized) RAND_poll()' into regions protected by
3362 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
3363 having multiple threads call RAND_poll() concurrently.
3366 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
3367 combination of a flag and a thread ID variable.
3368 Otherwise while one thread is in ssleay_rand_bytes (which sets the
3369 flag), *other* threads can enter ssleay_add_bytes without obeying
3370 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
3371 that they do not hold after the first thread unsets add_do_not_lock).
3374 *) Change bctest again: '-x' expressions are not available in all
3378 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
3380 *) Fix a couple of memory leaks in PKCS7_dataDecode()
3381 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
3383 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
3384 the default extension for executables, if any. Also, make the perl
3385 scripts that use symlink() to test if it really exists and use "cp"
3386 if it doesn't. All this made OpenSSL compilable and installable in
3390 *) Fix for asn1_GetSequence() for indefinite length constructed data.
3391 If SEQUENCE is length is indefinite just set c->slen to the total
3392 amount of data available.
3393 [Steve Henson, reported by shige@FreeBSD.org]
3394 [This change does not apply to 0.9.7.]
3396 *) Change bctest to avoid here-documents inside command substitution
3397 (workaround for FreeBSD /bin/sh bug).
3398 For compatibility with Ultrix, avoid shell functions (introduced
3399 in the bctest version that searches along $PATH).
3402 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
3403 with des_encrypt() defined on some operating systems, like Solaris
3407 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
3408 On the Importance of Eliminating Errors in Cryptographic
3409 Computations, J. Cryptology 14 (2001) 2, 101-119,
3410 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
3413 *) MIPS assembler BIGNUM division bug fix.
3416 *) Disabled incorrect Alpha assembler code.
3419 *) Fix PKCS#7 decode routines so they correctly update the length
3420 after reading an EOC for the EXPLICIT tag.
3422 [This change does not apply to 0.9.7.]
3424 *) Fix bug in PKCS#12 key generation routines. This was triggered
3425 if a 3DES key was generated with a 0 initial byte. Include
3426 PKCS12_BROKEN_KEYGEN compilation option to retain the old
3427 (but broken) behaviour.
3430 *) Enhance bctest to search for a working bc along $PATH and print
3432 [Tim Rice <tim@multitalents.net> via Richard Levitte]
3434 *) Fix memory leaks in err.c: free err_data string if necessary;
3435 don't write to the wrong index in ERR_set_error_data.
3438 *) Implement ssl23_peek (analogous to ssl23_read), which previously
3442 *) Replace rdtsc with _emit statements for VC++ version 5.
3443 [Jeremy Cooper <jeremy@baymoo.org>]
3445 *) Make it possible to reuse SSLv2 sessions.
3448 *) In copy_email() check for >= 0 as a return value for
3449 X509_NAME_get_index_by_NID() since 0 is a valid index.
3450 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
3452 *) Avoid coredump with unsupported or invalid public keys by checking if
3453 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
3454 PKCS7_verify() fails with non detached data.
3457 *) Don't use getenv in library functions when run as setuid/setgid.
3458 New function OPENSSL_issetugid().
3461 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
3462 due to incorrect handling of multi-threading:
3464 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
3466 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
3468 3. Count how many times MemCheck_off() has been called so that
3469 nested use can be treated correctly. This also avoids
3470 inband-signalling in the previous code (which relied on the
3471 assumption that thread ID 0 is impossible).
3474 *) Add "-rand" option also to s_client and s_server.
3477 *) Fix CPU detection on Irix 6.x.
3478 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
3479 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
3481 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
3484 [This change does not apply to 0.9.7.]
3486 *) Use the cached encoding of an X509_NAME structure rather than
3487 copying it. This is apparently the reason for the libsafe "errors"
3488 but the code is actually correct.
3491 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
3492 Bleichenbacher's DSA attack.
3493 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
3494 to be set and top=0 forces the highest bit to be set; top=-1 is new
3495 and leaves the highest bit random.
3496 [Ulf Moeller, Bodo Moeller]
3498 *) In the NCONF_...-based implementations for CONF_... queries
3499 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
3500 a temporary CONF structure with the data component set to NULL
3501 (which gives segmentation faults in lh_retrieve).
3502 Instead, use NULL for the CONF pointer in CONF_get_string and
3503 CONF_get_number (which may use environment variables) and directly
3504 return NULL from CONF_get_section.
3507 *) Fix potential buffer overrun for EBCDIC.
3510 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
3511 keyUsage if basicConstraints absent for a CA.
3514 *) Make SMIME_write_PKCS7() write mail header values with a format that
3515 is more generally accepted (no spaces before the semicolon), since
3516 some programs can't parse those values properly otherwise. Also make
3517 sure BIO's that break lines after each write do not create invalid
3521 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
3522 macros previously used would not encode an empty SEQUENCE OF
3523 and break the signature.
3525 [This change does not apply to 0.9.7.]
3527 *) Zero the premaster secret after deriving the master secret in
3531 *) Add some EVP_add_digest_alias registrations (as found in
3532 OpenSSL_add_all_digests()) to SSL_library_init()
3533 aka OpenSSL_add_ssl_algorithms(). This provides improved
3534 compatibility with peers using X.509 certificates
3535 with unconventional AlgorithmIdentifier OIDs.
3538 *) Fix for Irix with NO_ASM.
3539 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
3541 *) ./config script fixes.
3542 [Ulf Moeller, Richard Levitte]
3544 *) Fix 'openssl passwd -1'.
3547 *) Change PKCS12_key_gen_asc() so it can cope with non null
3548 terminated strings whose length is passed in the passlen
3549 parameter, for example from PEM callbacks. This was done
3550 by adding an extra length parameter to asc2uni().
3551 [Steve Henson, reported by <oddissey@samsung.co.kr>]
3553 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
3554 call failed, free the DSA structure.
3557 *) Fix to uni2asc() to cope with zero length Unicode strings.
3558 These are present in some PKCS#12 files.
3561 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
3562 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
3563 when writing a 32767 byte record.
3564 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
3566 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
3567 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
3569 (RSA objects have a reference count access to which is protected
3570 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
3571 so they are meant to be shared between threads.)
3572 [Bodo Moeller, Geoff Thorpe; original patch submitted by
3573 "Reddie, Steven" <Steven.Reddie@ca.com>]
3575 *) Fix a deadlock in CRYPTO_mem_leaks().
3578 *) Use better test patterns in bntest.
3581 *) rand_win.c fix for Borland C.
3584 *) BN_rshift bugfix for n == 0.
3587 *) Add a 'bctest' script that checks for some known 'bc' bugs
3588 so that 'make test' does not abort just because 'bc' is broken.
3591 *) Store verify_result within SSL_SESSION also for client side to
3592 avoid potential security hole. (Re-used sessions on the client side
3593 always resulted in verify_result==X509_V_OK, not using the original
3594 result of the server certificate verification.)
3597 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
3598 SSL3_RT_APPLICATION_DATA, return 0.
3599 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
3603 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
3604 releases, have been re-implemented by renaming the previous
3605 implementations of ssl2_read and ssl3_read to ssl2_read_internal
3606 and ssl3_read_internal, respectively, and adding 'peek' parameters
3607 to them. The new ssl[23]_{read,peek} functions are calls to
3608 ssl[23]_read_internal with the 'peek' flag set appropriately.
3609 A 'peek' parameter has also been added to ssl3_read_bytes, which
3610 does the actual work for ssl3_read_internal.
3613 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
3614 the method-specific "init()" handler. Also clean up ex_data after
3615 calling the method-specific "finish()" handler. Previously, this was
3616 happening the other way round.
3619 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
3620 The previous value, 12, was not always sufficient for BN_mod_exp().
3623 *) Make sure that shared libraries get the internal name engine with
3624 the full version number and not just 0. This should mark the
3625 shared libraries as not backward compatible. Of course, this should
3626 be changed again when we can guarantee backward binary compatibility.
3629 *) Fix typo in get_cert_by_subject() in by_dir.c
3630 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
3632 *) Rework the system to generate shared libraries:
3634 - Make note of the expected extension for the shared libraries and
3635 if there is a need for symbolic links from for example libcrypto.so.0
3636 to libcrypto.so.0.9.7. There is extended info in Configure for
3639 - Make as few rebuilds of the shared libraries as possible.
3641 - Still avoid linking the OpenSSL programs with the shared libraries.
3643 - When installing, install the shared libraries separately from the
3647 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
3649 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
3650 and not in SSL_clear because the latter is also used by the
3651 accept/connect functions; previously, the settings made by
3652 SSL_set_read_ahead would be lost during the handshake.
3653 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
3655 *) Correct util/mkdef.pl to be selective about disabled algorithms.
3656 Previously, it would create entries for disableed algorithms no
3660 *) Added several new manual pages for SSL_* function.
3663 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
3665 *) In ssl23_get_client_hello, generate an error message when faced
3666 with an initial SSL 3.0/TLS record that is too small to contain the
3667 first two bytes of the ClientHello message, i.e. client_version.
3668 (Note that this is a pathologic case that probably has never happened
3669 in real life.) The previous approach was to use the version number
3670 from the record header as a substitute; but our protocol choice
3671 should not depend on that one because it is not authenticated
3672 by the Finished messages.
3675 *) More robust randomness gathering functions for Windows.
3676 [Jeffrey Altman <jaltman@columbia.edu>]
3678 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
3679 not set then we don't setup the error code for issuer check errors
3680 to avoid possibly overwriting other errors which the callback does
3681 handle. If an application does set the flag then we assume it knows
3682 what it is doing and can handle the new informational codes
3686 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
3687 a general "ANY" type, as such it should be able to decode anything
3688 including tagged types. However it didn't check the class so it would
3689 wrongly interpret tagged types in the same way as their universal
3690 counterpart and unknown types were just rejected. Changed so that the
3691 tagged and unknown types are handled in the same way as a SEQUENCE:
3692 that is the encoding is stored intact. There is also a new type
3693 "V_ASN1_OTHER" which is used when the class is not universal, in this
3694 case we have no idea what the actual type is so we just lump them all
3698 *) On VMS, stdout may very well lead to a file that is written to
3699 in a record-oriented fashion. That means that every write() will
3700 write a separate record, which will be read separately by the
3701 programs trying to read from it. This can be very confusing.
3703 The solution is to put a BIO filter in the way that will buffer
3704 text until a linefeed is reached, and then write everything a
3705 line at a time, so every record written will be an actual line,
3706 not chunks of lines and not (usually doesn't happen, but I've
3707 seen it once) several lines in one record. BIO_f_linebuffer() is
3710 Currently, it's a VMS-only method, because that's where it has
3711 been tested well enough.
3714 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
3715 it can return incorrect results.
3716 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
3717 but it was in 0.9.6-beta[12].)
3720 *) Disable the check for content being present when verifying detached
3721 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
3722 include zero length content when signing messages.
3725 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
3726 BIO_ctrl (for BIO pairs).
3729 *) Add DSO method for VMS.
3732 *) Bug fix: Montgomery multiplication could produce results with the
3736 *) Add RPM specification openssl.spec and modify it to build three
3737 packages. The default package contains applications, application
3738 documentation and run-time libraries. The devel package contains
3739 include files, static libraries and function documentation. The
3740 doc package contains the contents of the doc directory. The original
3741 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
3744 *) Add a large number of documentation files for many SSL routines.
3745 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
3747 *) Add a configuration entry for Sony News 4.
3748 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
3750 *) Don't set the two most significant bits to one when generating a
3751 random number < q in the DSA library.
3754 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
3755 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
3756 the underlying transport is blocking) if a handshake took place.
3757 (The default behaviour is needed by applications such as s_client
3758 and s_server that use select() to determine when to use SSL_read;
3759 but for applications that know in advance when to expect data, it
3760 just makes things more complicated.)
3763 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
3767 *) Add a few more EBCDIC conditionals that make `req' and `x509'
3768 work better on such systems.
3769 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
3771 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
3772 Update PKCS12_parse() so it copies the friendlyName and the
3773 keyid to the certificates aux info.
3776 *) Fix bug in PKCS7_verify() which caused an infinite loop
3777 if there was more than one signature.
3778 [Sven Uszpelkat <su@celocom.de>]
3780 *) Major change in util/mkdef.pl to include extra information
3781 about each symbol, as well as presentig variables as well
3782 as functions. This change means that there's n more need
3783 to rebuild the .num files when some algorithms are excluded.
3786 *) Allow the verify time to be set by an application,
3787 rather than always using the current time.
3790 *) Phase 2 verify code reorganisation. The certificate
3791 verify code now looks up an issuer certificate by a
3792 number of criteria: subject name, authority key id
3793 and key usage. It also verifies self signed certificates
3794 by the same criteria. The main comparison function is
3795 X509_check_issued() which performs these checks.
3797 Lot of changes were necessary in order to support this
3798 without completely rewriting the lookup code.
3800 Authority and subject key identifier are now cached.
3802 The LHASH 'certs' is X509_STORE has now been replaced
3803 by a STACK_OF(X509_OBJECT). This is mainly because an
3804 LHASH can't store or retrieve multiple objects with
3805 the same hash value.
3807 As a result various functions (which were all internal
3808 use only) have changed to handle the new X509_STORE
3809 structure. This will break anything that messed round
3810 with X509_STORE internally.
3812 The functions X509_STORE_add_cert() now checks for an
3813 exact match, rather than just subject name.
3815 The X509_STORE API doesn't directly support the retrieval
3816 of multiple certificates matching a given criteria, however
3817 this can be worked round by performing a lookup first
3818 (which will fill the cache with candidate certificates)
3819 and then examining the cache for matches. This is probably
3820 the best we can do without throwing out X509_LOOKUP
3821 entirely (maybe later...).
3823 The X509_VERIFY_CTX structure has been enhanced considerably.
3825 All certificate lookup operations now go via a get_issuer()
3826 callback. Although this currently uses an X509_STORE it
3827 can be replaced by custom lookups. This is a simple way
3828 to bypass the X509_STORE hackery necessary to make this
3829 work and makes it possible to use more efficient techniques
3830 in future. A very simple version which uses a simple
3831 STACK for its trusted certificate store is also provided
3832 using X509_STORE_CTX_trusted_stack().
3834 The verify_cb() and verify() callbacks now have equivalents
3835 in the X509_STORE_CTX structure.
3837 X509_STORE_CTX also has a 'flags' field which can be used
3838 to customise the verify behaviour.
3841 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
3842 excludes S/MIME capabilities.
3845 *) When a certificate request is read in keep a copy of the
3846 original encoding of the signed data and use it when outputing
3847 again. Signatures then use the original encoding rather than
3848 a decoded, encoded version which may cause problems if the
3849 request is improperly encoded.
3852 *) For consistency with other BIO_puts implementations, call
3853 buffer_write(b, ...) directly in buffer_puts instead of calling
3856 In BIO_puts, increment b->num_write as in BIO_write.
3857 [Peter.Sylvester@EdelWeb.fr]
3859 *) Fix BN_mul_word for the case where the word is 0. (We have to use
3860 BN_zero, we may not return a BIGNUM with an array consisting of
3864 *) Avoid calling abort() from within the library when problems are
3865 detected, except if preprocessor symbols have been defined
3866 (such as REF_CHECK, BN_DEBUG etc.).
3869 *) New openssl application 'rsautl'. This utility can be
3870 used for low level RSA operations. DER public key
3871 BIO/fp routines also added.
3874 *) New Configure entry and patches for compiling on QNX 4.
3875 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
3877 *) A demo state-machine implementation was sponsored by
3878 Nuron (http://www.nuron.com/) and is now available in
3879 demos/state_machine.
3882 *) New options added to the 'dgst' utility for signature
3883 generation and verification.
3886 *) Unrecognized PKCS#7 content types are now handled via a
3887 catch all ASN1_TYPE structure. This allows unsupported
3888 types to be stored as a "blob" and an application can
3889 encode and decode it manually.
3892 *) Fix various signed/unsigned issues to make a_strex.c
3894 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
3896 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
3897 length if passed a buffer. ASN1_INTEGER_to_BN failed
3898 if passed a NULL BN and its argument was negative.
3899 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
3901 *) Modification to PKCS#7 encoding routines to output definite
3902 length encoding. Since currently the whole structures are in
3903 memory there's not real point in using indefinite length
3904 constructed encoding. However if OpenSSL is compiled with
3905 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
3908 *) Added BIO_vprintf() and BIO_vsnprintf().
3911 *) Added more prefixes to parse for in the the strings written
3912 through a logging bio, to cover all the levels that are available
3913 through syslog. The prefixes are now:
3915 PANIC, EMERG, EMR => LOG_EMERG
3916 ALERT, ALR => LOG_ALERT
3917 CRIT, CRI => LOG_CRIT
3918 ERROR, ERR => LOG_ERR
3919 WARNING, WARN, WAR => LOG_WARNING
3920 NOTICE, NOTE, NOT => LOG_NOTICE
3921 INFO, INF => LOG_INFO
3922 DEBUG, DBG => LOG_DEBUG
3924 and as before, if none of those prefixes are present at the
3925 beginning of the string, LOG_ERR is chosen.
3927 On Win32, the LOG_* levels are mapped according to this:
3929 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
3930 LOG_WARNING => EVENTLOG_WARNING_TYPE
3931 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
3935 *) Made it possible to reconfigure with just the configuration
3936 argument "reconf" or "reconfigure". The command line arguments
3937 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
3938 and are retrieved from there when reconfiguring.
3942 [Assar Westerlund <assar@sics.se>, Richard Levitte]
3944 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
3947 *) The obj_dat.pl script was messing up the sorting of object
3948 names. The reason was that it compared the quoted version
3949 of strings as a result "OCSP" > "OCSP Signing" because
3950 " > SPACE. Changed script to store unquoted versions of
3951 names and add quotes on output. It was also omitting some
3952 names from the lookup table if they were given a default
3953 value (that is if SN is missing it is given the same
3954 value as LN and vice versa), these are now added on the
3955 grounds that if an object has a name we should be able to
3956 look it up. Finally added warning output when duplicate
3957 short or long names are found.
3960 *) Changes needed for Tandem NSK.
3961 [Scott Uroff <scott@xypro.com>]
3963 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
3964 RSA_padding_check_SSLv23(), special padding was never detected
3965 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
3966 version rollback attacks was not effective.
3968 In s23_clnt.c, don't use special rollback-attack detection padding
3969 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
3970 client; similarly, in s23_srvr.c, don't do the rollback check if
3971 SSL 2.0 is the only protocol enabled in the server.
3974 *) Make it possible to get hexdumps of unprintable data with 'openssl
3975 asn1parse'. By implication, the functions ASN1_parse_dump() and
3976 BIO_dump_indent() are added.
3979 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
3980 these print out strings and name structures based on various
3981 flags including RFC2253 support and proper handling of
3982 multibyte characters. Added options to the 'x509' utility
3983 to allow the various flags to be set.
3986 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
3987 Also change the functions X509_cmp_current_time() and
3988 X509_gmtime_adj() work with an ASN1_TIME structure,
3989 this will enable certificates using GeneralizedTime in validity
3990 dates to be checked.
3993 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
3994 negative public key encodings) on by default,
3995 NO_NEG_PUBKEY_BUG can be set to disable it.
3998 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
3999 content octets. An i2c_ASN1_OBJECT is unnecessary because
4000 the encoding can be trivially obtained from the structure.
4003 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
4004 not read locks (CRYPTO_r_[un]lock).
4007 *) A first attempt at creating official support for shared
4008 libraries through configuration. I've kept it so the
4009 default is static libraries only, and the OpenSSL programs
4010 are always statically linked for now, but there are
4011 preparations for dynamic linking in place.
4012 This has been tested on Linux and Tru64.
4015 *) Randomness polling function for Win9x, as described in:
4016 Peter Gutmann, Software Generation of Practically Strong
4020 *) Fix so PRNG is seeded in req if using an already existing
4024 *) New options to smime application. -inform and -outform
4025 allow alternative formats for the S/MIME message including
4026 PEM and DER. The -content option allows the content to be
4027 specified separately. This should allow things like Netscape
4028 form signing output easier to verify.
4031 *) Fix the ASN1 encoding of tags using the 'long form'.
4034 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
4035 STRING types. These convert content octets to and from the
4036 underlying type. The actual tag and length octets are
4037 already assumed to have been read in and checked. These
4038 are needed because all other string types have virtually
4039 identical handling apart from the tag. By having versions
4040 of the ASN1 functions that just operate on content octets
4041 IMPLICIT tagging can be handled properly. It also allows
4042 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
4043 and ASN1_INTEGER are identical apart from the tag.
4046 *) Change the handling of OID objects as follows:
4048 - New object identifiers are inserted in objects.txt, following
4049 the syntax given in objects.README.
4050 - objects.pl is used to process obj_mac.num and create a new
4052 - obj_dat.pl is used to create a new obj_dat.h, using the data in
4055 This is currently kind of a hack, and the perl code in objects.pl
4056 isn't very elegant, but it works as I intended. The simplest way
4057 to check that it worked correctly is to look in obj_dat.h and
4058 check the array nid_objs and make sure the objects haven't moved
4059 around (this is important!). Additions are OK, as well as
4060 consistent name changes.
4063 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
4066 *) Addition of the command line parameter '-rand file' to 'openssl req'.
4067 The given file adds to whatever has already been seeded into the
4068 random pool through the RANDFILE configuration file option or
4069 environment variable, or the default random state file.
4072 *) mkstack.pl now sorts each macro group into lexical order.
4073 Previously the output order depended on the order the files
4074 appeared in the directory, resulting in needless rewriting
4078 *) Patches to make OpenSSL compile under Win32 again. Mostly
4079 work arounds for the VC++ problem that it treats func() as
4080 func(void). Also stripped out the parts of mkdef.pl that
4081 added extra typesafe functions: these no longer exist.
4084 *) Reorganisation of the stack code. The macros are now all
4085 collected in safestack.h . Each macro is defined in terms of
4086 a "stack macro" of the form SKM_<name>(type, a, b). The
4087 DEBUG_SAFESTACK is now handled in terms of function casts,
4088 this has the advantage of retaining type safety without the
4089 use of additional functions. If DEBUG_SAFESTACK is not defined
4090 then the non typesafe macros are used instead. Also modified the
4091 mkstack.pl script to handle the new form. Needs testing to see
4092 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
4093 the default if no major problems. Similar behaviour for ASN1_SET_OF
4094 and PKCS12_STACK_OF.
4097 *) When some versions of IIS use the 'NET' form of private key the
4098 key derivation algorithm is different. Normally MD5(password) is
4099 used as a 128 bit RC4 key. In the modified case
4100 MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
4101 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
4102 as the old Netscape_RSA functions except they have an additional
4103 'sgckey' parameter which uses the modified algorithm. Also added
4104 an -sgckey command line option to the rsa utility. Thanks to
4105 Adrian Peck <bertie@ncipher.com> for posting details of the modified
4106 algorithm to openssl-dev.
4109 *) The evp_local.h macros were using 'c.##kname' which resulted in
4110 invalid expansion on some systems (SCO 5.0.5 for example).
4111 Corrected to 'c.kname'.
4112 [Phillip Porch <root@theporch.com>]
4114 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
4115 a STACK of email addresses from a certificate or request, these look
4116 in the subject name and the subject alternative name extensions and
4117 omit any duplicate addresses.
4120 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
4121 This makes DSA verification about 2 % faster.
4124 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
4125 (meaning that now 2^5 values will be precomputed, which is only 4 KB
4126 plus overhead for 1024 bit moduli).
4127 This makes exponentiations about 0.5 % faster for 1024 bit
4128 exponents (as measured by "openssl speed rsa2048").
4131 *) Rename memory handling macros to avoid conflicts with other
4133 Malloc => OPENSSL_malloc
4134 Malloc_locked => OPENSSL_malloc_locked
4135 Realloc => OPENSSL_realloc
4136 Free => OPENSSL_free
4139 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
4140 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
4143 *) CygWin32 support.
4144 [John Jarvie <jjarvie@newsguy.com>]
4146 *) The type-safe stack code has been rejigged. It is now only compiled
4147 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
4148 by default all type-specific stack functions are "#define"d back to
4149 standard stack functions. This results in more streamlined output
4150 but retains the type-safety checking possibilities of the original
4154 *) The STACK code has been cleaned up, and certain type declarations
4155 that didn't make a lot of sense have been brought in line. This has
4156 also involved a cleanup of sorts in safestack.h to more correctly
4157 map type-safe stack functions onto their plain stack counterparts.
4158 This work has also resulted in a variety of "const"ifications of
4159 lots of the code, especially "_cmp" operations which should normally
4160 be prototyped with "const" parameters anyway.
4163 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
4164 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
4165 (The PRNG state consists of two parts, the large pool 'state' and 'md',
4166 where all of 'md' is used each time the PRNG is used, but 'state'
4167 is used only indexed by a cyclic counter. As entropy may not be
4168 well distributed from the beginning, 'md' is important as a
4169 chaining variable. However, the output function chains only half
4170 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
4171 all of 'md', and seeding with STATE_SIZE dummy bytes will result
4172 in all of 'state' being rewritten, with the new values depending
4173 on virtually all of 'md'. This overcomes the 80 bit limitation.)
4176 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
4177 the handshake is continued after ssl_verify_cert_chain();
4178 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
4179 can lead to 'unexplainable' connection aborts later.
4180 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
4182 *) Major EVP API cipher revision.
4183 Add hooks for extra EVP features. This allows various cipher
4184 parameters to be set in the EVP interface. Support added for variable
4185 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
4186 setting of RC2 and RC5 parameters.
4188 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
4191 Remove lots of duplicated code from the EVP library. For example *every*
4192 cipher init() function handles the 'iv' in the same way according to the
4193 cipher mode. They also all do nothing if the 'key' parameter is NULL and
4194 for CFB and OFB modes they zero ctx->num.
4196 New functionality allows removal of S/MIME code RC2 hack.
4198 Most of the routines have the same form and so can be declared in terms
4201 By shifting this to the top level EVP_CipherInit() it can be removed from
4202 all individual ciphers. If the cipher wants to handle IVs or keys
4203 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
4206 Change lots of functions like EVP_EncryptUpdate() to now return a
4207 value: although software versions of the algorithms cannot fail
4208 any installed hardware versions can.
4211 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
4212 this option is set, tolerate broken clients that send the negotiated
4213 protocol version number instead of the requested protocol version
4217 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
4218 i.e. non-zero for export ciphersuites, zero otherwise.
4219 Previous versions had this flag inverted, inconsistent with
4220 rsa_tmp_cb (..._TMP_RSA_CB).
4221 [Bodo Moeller; problem reported by Amit Chopra]
4223 *) Add missing DSA library text string. Work around for some IIS
4224 key files with invalid SEQUENCE encoding.
4227 *) Add a document (doc/standards.txt) that list all kinds of standards
4228 and so on that are implemented in OpenSSL.
4231 *) Enhance c_rehash script. Old version would mishandle certificates
4232 with the same subject name hash and wouldn't handle CRLs at all.
4233 Added -fingerprint option to crl utility, to support new c_rehash
4237 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
4240 *) Fix for SSL server purpose checking. Server checking was
4241 rejecting certificates which had extended key usage present
4242 but no ssl client purpose.
4243 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
4245 *) Make PKCS#12 code work with no password. The PKCS#12 spec
4246 is a little unclear about how a blank password is handled.
4247 Since the password in encoded as a BMPString with terminating
4248 double NULL a zero length password would end up as just the
4249 double NULL. However no password at all is different and is
4250 handled differently in the PKCS#12 key generation code. NS
4251 treats a blank password as zero length. MSIE treats it as no
4252 password on export: but it will try both on import. We now do
4253 the same: PKCS12_parse() tries zero length and no password if
4254 the password is set to "" or NULL (NULL is now a valid password:
4255 it wasn't before) as does the pkcs12 application.
4258 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
4259 perror when PEM_read_bio_X509_REQ fails, the error message must
4260 be obtained from the error queue.
4263 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
4264 it in ERR_remove_state if appropriate, and change ERR_get_state
4265 accordingly to avoid race conditions (this is necessary because
4266 thread_hash is no longer constant once set).
4269 *) Bugfix for linux-elf makefile.one.
4272 *) RSA_get_default_method() will now cause a default
4273 RSA_METHOD to be chosen if one doesn't exist already.
4274 Previously this was only set during a call to RSA_new()
4275 or RSA_new_method(NULL) meaning it was possible for
4276 RSA_get_default_method() to return NULL.
4279 *) Added native name translation to the existing DSO code
4280 that will convert (if the flag to do so is set) filenames
4281 that are sufficiently small and have no path information
4282 into a canonical native form. Eg. "blah" converted to
4283 "libblah.so" or "blah.dll" etc.
4286 *) New function ERR_error_string_n(e, buf, len) which is like
4287 ERR_error_string(e, buf), but writes at most 'len' bytes
4288 including the 0 terminator. For ERR_error_string_n, 'buf'
4290 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
4292 *) CONF library reworked to become more general. A new CONF
4293 configuration file reader "class" is implemented as well as a
4294 new functions (NCONF_*, for "New CONF") to handle it. The now
4295 old CONF_* functions are still there, but are reimplemented to
4296 work in terms of the new functions. Also, a set of functions
4297 to handle the internal storage of the configuration data is
4298 provided to make it easier to write new configuration file
4299 reader "classes" (I can definitely see something reading a
4300 configuration file in XML format, for example), called _CONF_*,
4301 or "the configuration storage API"...
4303 The new configuration file reading functions are:
4305 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
4306 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
4308 NCONF_default, NCONF_WIN32
4310 NCONF_dump_fp, NCONF_dump_bio
4312 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
4313 NCONF_new creates a new CONF object. This works in the same way
4314 as other interfaces in OpenSSL, like the BIO interface.
4315 NCONF_dump_* dump the internal storage of the configuration file,
4316 which is useful for debugging. All other functions take the same
4317 arguments as the old CONF_* functions wth the exception of the
4318 first that must be a `CONF *' instead of a `LHASH *'.
4320 To make it easer to use the new classes with the old CONF_* functions,
4321 the function CONF_set_default_method is provided.
4324 *) Add '-tls1' option to 'openssl ciphers', which was already
4325 mentioned in the documentation but had not been implemented.
4326 (This option is not yet really useful because even the additional
4327 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
4330 *) Initial DSO code added into libcrypto for letting OpenSSL (and
4331 OpenSSL-based applications) load shared libraries and bind to
4332 them in a portable way.
4333 [Geoff Thorpe, with contributions from Richard Levitte]
4335 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
4337 *) Make sure _lrotl and _lrotr are only used with MSVC.
4339 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
4340 (the default implementation of RAND_status).
4342 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
4343 to '-clrext' (= clear extensions), as intended and documented.
4344 [Bodo Moeller; inconsistency pointed out by Michael Attili
4347 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
4348 was larger than the MD block size.
4349 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
4351 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
4352 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
4353 using the passed key: if the passed key was a private key the result
4354 of X509_print(), for example, would be to print out all the private key
4358 *) des_quad_cksum() byte order bug fix.
4359 [Ulf Möller, using the problem description in krb4-0.9.7, where
4360 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
4362 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
4364 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
4366 *) For easily testing in shell scripts whether some command
4367 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
4368 returns with exit code 0 iff no command of the given name is available.
4369 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
4370 the output goes to stdout and nothing is printed to stderr.
4371 Additional arguments are always ignored.
4373 Since for each cipher there is a command of the same name,
4374 the 'no-cipher' compilation switches can be tested this way.
4376 ('openssl no-XXX' is not able to detect pseudo-commands such
4377 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
4380 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
4383 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
4384 is set; it will be thrown away anyway because each handshake creates
4386 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
4387 to parameters -- in previous versions (since OpenSSL 0.9.3) the
4388 'default key' from SSL_CTX_set_tmp_dh would always be lost, meanining
4389 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
4392 *) New s_client option -ign_eof: EOF at stdin is ignored, and
4393 'Q' and 'R' lose their special meanings (quit/renegotiate).
4394 This is part of what -quiet does; unlike -quiet, -ign_eof
4395 does not suppress any output.
4398 *) Add compatibility options to the purpose and trust code. The
4399 purpose X509_PURPOSE_ANY is "any purpose" which automatically
4400 accepts a certificate or CA, this was the previous behaviour,
4401 with all the associated security issues.
4403 X509_TRUST_COMPAT is the old trust behaviour: only and
4404 automatically trust self signed roots in certificate store. A
4405 new trust setting X509_TRUST_DEFAULT is used to specify that
4406 a purpose has no associated trust setting and it should instead
4407 use the value in the default purpose.
4410 *) Fix the PKCS#8 DSA private key code so it decodes keys again
4411 and fix a memory leak.
4414 *) In util/mkerr.pl (which implements 'make errors'), preserve
4415 reason strings from the previous version of the .c file, as
4416 the default to have only downcase letters (and digits) in
4417 automatically generated reasons codes is not always appropriate.
4420 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
4421 using strerror. Previously, ERR_reason_error_string() returned
4422 library names as reason strings for SYSerr; but SYSerr is a special
4423 case where small numbers are errno values, not library numbers.
4426 *) Add '-dsaparam' option to 'openssl dhparam' application. This
4427 converts DSA parameters into DH parameters. (When creating parameters,
4428 DSA_generate_parameters is used.)
4431 *) Include 'length' (recommended exponent length) in C code generated
4432 by 'openssl dhparam -C'.
4435 *) The second argument to set_label in perlasm was already being used
4436 so couldn't be used as a "file scope" flag. Moved to third argument
4440 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
4441 instead of RAND_bytes for encryption IVs and salts.
4444 *) Include RAND_status() into RAND_METHOD instead of implementing
4445 it only for md_rand.c Otherwise replacing the PRNG by calling
4446 RAND_set_rand_method would be impossible.
4449 *) Don't let DSA_generate_key() enter an infinite loop if the random
4450 number generation fails.
4453 *) New 'rand' application for creating pseudo-random output.
4456 *) Added configuration support for Linux/IA64
4457 [Rolf Haberrecker <rolf@suse.de>]
4459 *) Assembler module support for Mingw32.
4462 *) Shared library support for HPUX (in shlib/).
4463 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
4465 *) Shared library support for Solaris gcc.
4466 [Lutz Behnke <behnke@trustcenter.de>]
4468 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
4470 *) PKCS7_encrypt() was adding text MIME headers twice because they
4471 were added manually and by SMIME_crlf_copy().
4474 *) In bntest.c don't call BN_rand with zero bits argument.
4475 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
4477 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
4478 case was implemented. This caused BN_div_recp() to fail occasionally.
4481 *) Add an optional second argument to the set_label() in the perl
4482 assembly language builder. If this argument exists and is set
4483 to 1 it signals that the assembler should use a symbol whose
4484 scope is the entire file, not just the current function. This
4485 is needed with MASM which uses the format label:: for this scope.
4486 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
4488 *) Change the ASN1 types so they are typedefs by default. Before
4489 almost all types were #define'd to ASN1_STRING which was causing
4490 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
4494 *) Change names of new functions to the new get1/get0 naming
4495 convention: After 'get1', the caller owns a reference count
4496 and has to call ..._free; 'get0' returns a pointer to some
4497 data structure without incrementing reference counters.
4498 (Some of the existing 'get' functions increment a reference
4499 counter, some don't.)
4500 Similarly, 'set1' and 'add1' functions increase reference
4501 counters or duplicate objects.
4504 *) Allow for the possibility of temp RSA key generation failure:
4505 the code used to assume it always worked and crashed on failure.
4508 *) Fix potential buffer overrun problem in BIO_printf().
4509 [Ulf Möller, using public domain code by Patrick Powell; problem
4510 pointed out by David Sacerdote <das33@cornell.edu>]
4512 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
4513 RAND_egd() and RAND_status(). In the command line application,
4514 the EGD socket can be specified like a seed file using RANDFILE
4518 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
4519 Some CAs (e.g. Verisign) distribute certificates in this form.
4522 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
4523 list to exclude them. This means that no special compilation option
4524 is needed to use anonymous DH: it just needs to be included in the
4528 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
4529 EVP_MD_type. The old functionality is available in a new macro called
4530 EVP_MD_md(). Change code that uses it and update docs.
4533 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
4534 where the 'void *' argument is replaced by a function pointer argument.
4535 Previously 'void *' was abused to point to functions, which works on
4536 many platforms, but is not correct. As these functions are usually
4537 called by macros defined in OpenSSL header files, most source code
4538 should work without changes.
4541 *) <openssl/opensslconf.h> (which is created by Configure) now contains
4542 sections with information on -D... compiler switches used for
4543 compiling the library so that applications can see them. To enable
4544 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
4545 must be defined. E.g.,
4546 #define OPENSSL_ALGORITHM_DEFINES
4547 #include <openssl/opensslconf.h>
4548 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
4549 [Richard Levitte, Ulf and Bodo Möller]
4551 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
4555 *) Change the 'other' type in certificate aux info to a STACK_OF
4556 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
4557 the required ASN1 format: arbitrary types determined by an OID.
4560 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
4561 argument to 'req'. This is not because the function is newer or
4562 better than others it just uses the work 'NEW' in the certificate
4563 request header lines. Some software needs this.
4566 *) Reorganise password command line arguments: now passwords can be
4567 obtained from various sources. Delete the PEM_cb function and make
4568 it the default behaviour: i.e. if the callback is NULL and the
4569 usrdata argument is not NULL interpret it as a null terminated pass
4570 phrase. If usrdata and the callback are NULL then the pass phrase
4571 is prompted for as usual.
4574 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
4575 the support is automatically enabled. The resulting binaries will
4576 autodetect the card and use it if present.
4577 [Ben Laurie and Compaq Inc.]
4579 *) Work around for Netscape hang bug. This sends certificate request
4580 and server done in one record. Since this is perfectly legal in the
4581 SSL/TLS protocol it isn't a "bug" option and is on by default. See
4582 the bugs/SSLv3 entry for more info.
4585 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
4588 *) Add -rand argument to smime and pkcs12 applications and read/write
4592 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
4595 *) Add command line password options to the remaining applications.
4598 *) Bug fix for BN_div_recp() for numerators with an even number of
4602 *) More tests in bntest.c, and changed test_bn output.
4605 *) ./config recognizes MacOS X now.
4608 *) Bug fix for BN_div() when the first words of num and divsor are
4609 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
4612 *) Add support for various broken PKCS#8 formats, and command line
4613 options to produce them.
4616 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
4617 get temporary BIGNUMs from a BN_CTX.
4620 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
4624 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
4625 include a #define from the old name to the new. The original intent
4626 was that statically linked binaries could for example just call
4627 SSLeay_add_all_ciphers() to just add ciphers to the table and not
4628 link with digests. This never worked becayse SSLeay_add_all_digests()
4629 and SSLeay_add_all_ciphers() were in the same source file so calling
4630 one would link with the other. They are now in separate source files.
4633 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
4636 *) Use a less unusual form of the Miller-Rabin primality test (it used
4637 a binary algorithm for exponentiation integrated into the Miller-Rabin
4638 loop, our standard modexp algorithms are faster).
4641 *) Support for the EBCDIC character set completed.
4642 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
4644 *) Source code cleanups: use const where appropriate, eliminate casts,
4645 use void * instead of char * in lhash.
4648 *) Bugfix: ssl3_send_server_key_exchange was not restartable
4649 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
4650 this the server could overwrite ephemeral keys that the client
4654 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
4655 using 50 iterations of the Rabin-Miller test.
4657 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
4658 iterations of the Rabin-Miller test as required by the appendix
4659 to FIPS PUB 186[-1]) instead of DSA_is_prime.
4660 As BN_is_prime_fasttest includes trial division, DSA parameter
4661 generation becomes much faster.
4663 This implies a change for the callback functions in DSA_is_prime
4664 and DSA_generate_parameters: The callback function is called once
4665 for each positive witness in the Rabin-Miller test, not just
4666 occasionally in the inner loop; and the parameters to the
4667 callback function now provide an iteration count for the outer
4668 loop rather than for the current invocation of the inner loop.
4669 DSA_generate_parameters additionally can call the callback
4670 function with an 'iteration count' of -1, meaning that a
4671 candidate has passed the trial division test (when q is generated
4672 from an application-provided seed, trial division is skipped).
4675 *) New function BN_is_prime_fasttest that optionally does trial
4676 division before starting the Rabin-Miller test and has
4677 an additional BN_CTX * argument (whereas BN_is_prime always
4678 has to allocate at least one BN_CTX).
4679 'callback(1, -1, cb_arg)' is called when a number has passed the
4680 trial division stage.
4683 *) Fix for bug in CRL encoding. The validity dates weren't being handled
4687 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
4690 *) New function BN_pseudo_rand().
4693 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
4694 bignum version of BN_from_montgomery() with the working code from
4695 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
4699 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
4700 made it impossible to use the same SSL_SESSION data structure in
4701 SSL2 clients in multiple threads.
4704 *) The return value of RAND_load_file() no longer counts bytes obtained
4705 by stat(). RAND_load_file(..., -1) is new and uses the complete file
4706 to seed the PRNG (previously an explicit byte count was required).
4707 [Ulf Möller, Bodo Möller]
4709 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
4710 used (char *) instead of (void *) and had casts all over the place.
4713 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
4716 *) Retain source code compatibility for BN_prime_checks macro:
4717 BN_is_prime(..., BN_prime_checks, ...) now uses
4718 BN_prime_checks_for_size to determine the appropriate number of
4719 Rabin-Miller iterations.
4722 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
4723 DH_CHECK_P_NOT_SAFE_PRIME.
4724 (Check if this is true? OpenPGP calls them "strong".)
4727 *) Merge the functionality of "dh" and "gendh" programs into a new program
4728 "dhparam". The old programs are retained for now but will handle DH keys
4729 (instead of parameters) in future.
4732 *) Make the ciphers, s_server and s_client programs check the return values
4733 when a new cipher list is set.
4736 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
4737 ciphers. Before when the 56bit ciphers were enabled the sorting was
4740 The syntax for the cipher sorting has been extended to support sorting by
4741 cipher-strength (using the strength_bits hard coded in the tables).
4742 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
4744 Fix a bug in the cipher-command parser: when supplying a cipher command
4745 string with an "undefined" symbol (neither command nor alphanumeric
4746 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
4747 an error is flagged.
4749 Due to the strength-sorting extension, the code of the
4750 ssl_create_cipher_list() function was completely rearranged. I hope that
4751 the readability was also increased :-)
4752 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
4754 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
4755 for the first serial number and places 2 in the serial number file. This
4756 avoids problems when the root CA is created with serial number zero and
4757 the first user certificate has the same issuer name and serial number
4761 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
4762 the new code. Add documentation for this stuff.
4765 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
4766 X509_*() to X509at_*() on the grounds that they don't handle X509
4767 structures and behave in an analagous way to the X509v3 functions:
4768 they shouldn't be called directly but wrapper functions should be used
4771 So we also now have some wrapper functions that call the X509at functions
4772 when passed certificate requests. (TO DO: similar things can be done with
4773 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
4774 things. Some of these need some d2i or i2d and print functionality
4775 because they handle more complex structures.)
4778 *) Add missing #ifndefs that caused missing symbols when building libssl
4779 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
4780 NO_RSA in ssl/s2*.c.
4781 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
4783 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
4784 has a return value which indicates the quality of the random data
4785 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
4786 error queue. New function RAND_pseudo_bytes() generates output that is
4787 guaranteed to be unique but not unpredictable. RAND_add is like
4788 RAND_seed, but takes an extra argument for an entropy estimate
4789 (RAND_seed always assumes full entropy).
4792 *) Do more iterations of Rabin-Miller probable prime test (specifically,
4793 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
4794 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
4795 in crypto/bn/bn_prime.c for the complete table). This guarantees a
4796 false-positive rate of at most 2^-80 for random input.
4799 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
4802 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
4803 in the 0.9.5 release), this returns the chain
4804 from an X509_CTX structure with a dup of the stack and all
4805 the X509 reference counts upped: so the stack will exist
4806 after X509_CTX_cleanup() has been called. Modify pkcs12.c
4809 Also make SSL_SESSION_print() print out the verify return
4813 *) Add manpage for the pkcs12 command. Also change the default
4814 behaviour so MAC iteration counts are used unless the new
4815 -nomaciter option is used. This improves file security and
4816 only older versions of MSIE (4.0 for example) need it.
4819 *) Honor the no-xxx Configure options when creating .DEF files.
4822 *) Add PKCS#10 attributes to field table: challengePassword,
4823 unstructuredName and unstructuredAddress. These are taken from
4824 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
4825 international characters are used.
4827 More changes to X509_ATTRIBUTE code: allow the setting of types
4828 based on strings. Remove the 'loc' parameter when adding
4829 attributes because these will be a SET OF encoding which is sorted
4833 *) Initial changes to the 'req' utility to allow request generation
4834 automation. This will allow an application to just generate a template
4835 file containing all the field values and have req construct the
4838 Initial support for X509_ATTRIBUTE handling. Stacks of these are
4839 used all over the place including certificate requests and PKCS#7
4840 structures. They are currently handled manually where necessary with
4841 some primitive wrappers for PKCS#7. The new functions behave in a
4842 manner analogous to the X509 extension functions: they allow
4843 attributes to be looked up by NID and added.
4845 Later something similar to the X509V3 code would be desirable to
4846 automatically handle the encoding, decoding and printing of the
4847 more complex types. The string types like challengePassword can
4848 be handled by the string table functions.
4850 Also modified the multi byte string table handling. Now there is
4851 a 'global mask' which masks out certain types. The table itself
4852 can use the flag STABLE_NO_MASK to ignore the mask setting: this
4853 is useful when for example there is only one permissible type
4854 (as in countryName) and using the mask might result in no valid
4858 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
4859 SSL_get_peer_finished to allow applications to obtain the latest
4860 Finished messages sent to the peer or expected from the peer,
4861 respectively. (SSL_get_peer_finished is usually the Finished message
4862 actually received from the peer, otherwise the protocol will be aborted.)
4864 As the Finished message are message digests of the complete handshake
4865 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
4866 be used for external authentication procedures when the authentication
4867 provided by SSL/TLS is not desired or is not enough.
4870 *) Enhanced support for Alpha Linux is added. Now ./config checks if
4871 the host supports BWX extension and if Compaq C is present on the
4872 $PATH. Just exploiting of the BWX extension results in 20-30%
4873 performance kick for some algorithms, e.g. DES and RC4 to mention
4874 a couple. Compaq C in turn generates ~20% faster code for MD5 and
4878 *) Add support for MS "fast SGC". This is arguably a violation of the
4879 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
4880 weak crypto and after checking the certificate is SGC a second one
4881 with strong crypto. MS SGC stops the first handshake after receiving
4882 the server certificate message and sends a second client hello. Since
4883 a server will typically do all the time consuming operations before
4884 expecting any further messages from the client (server key exchange
4885 is the most expensive) there is little difference between the two.
4887 To get OpenSSL to support MS SGC we have to permit a second client
4888 hello message after we have sent server done. In addition we have to
4889 reset the MAC if we do get this second client hello.
4892 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
4893 if a DER encoded private key is RSA or DSA traditional format. Changed
4894 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
4895 format DER encoded private key. Newer code should use PKCS#8 format which
4896 has the key type encoded in the ASN1 structure. Added DER private key
4897 support to pkcs8 application.
4900 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
4901 ciphersuites has been selected (as required by the SSL 3/TLS 1
4902 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
4903 is set, we interpret this as a request to violate the specification
4904 (the worst that can happen is a handshake failure, and 'correct'
4905 behaviour would result in a handshake failure anyway).
4908 *) In SSL_CTX_add_session, take into account that there might be multiple
4909 SSL_SESSION structures with the same session ID (e.g. when two threads
4910 concurrently obtain them from an external cache).
4911 The internal cache can handle only one SSL_SESSION with a given ID,
4912 so if there's a conflict, we now throw out the old one to achieve
4916 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
4917 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
4918 some routines that use cipher OIDs: some ciphers do not have OIDs
4919 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
4923 *) Simplify the trust setting structure and code. Now we just have
4924 two sequences of OIDs for trusted and rejected settings. These will
4925 typically have values the same as the extended key usage extension
4926 and any application specific purposes.
4928 The trust checking code now has a default behaviour: it will just
4929 check for an object with the same NID as the passed id. Functions can
4930 be provided to override either the default behaviour or the behaviour
4931 for a given id. SSL client, server and email already have functions
4932 in place for compatibility: they check the NID and also return "trusted"
4933 if the certificate is self signed.
4936 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
4937 traditional format into an EVP_PKEY structure.
4940 *) Add a password callback function PEM_cb() which either prompts for
4941 a password if usr_data is NULL or otherwise assumes it is a null
4942 terminated password. Allow passwords to be passed on command line
4943 environment or config files in a few more utilities.
4946 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
4947 keys. Add some short names for PKCS#8 PBE algorithms and allow them
4948 to be specified on the command line for the pkcs8 and pkcs12 utilities.
4949 Update documentation.
4952 *) Support for ASN1 "NULL" type. This could be handled before by using
4953 ASN1_TYPE but there wasn't any function that would try to read a NULL
4954 and produce an error if it couldn't. For compatibility we also have
4955 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
4956 don't allocate anything because they don't need to.
4959 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
4961 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
4963 *) Rebuild of the memory allocation routines used by OpenSSL code and
4964 possibly others as well. The purpose is to make an interface that
4965 provide hooks so anyone can build a separate set of allocation and
4966 deallocation routines to be used by OpenSSL, for example memory
4967 pool implementations, or something else, which was previously hard
4968 since Malloc(), Realloc() and Free() were defined as macros having
4969 the values malloc, realloc and free, respectively (except for Win32
4970 compilations). The same is provided for memory debugging code.
4971 OpenSSL already comes with functionality to find memory leaks, but
4972 this gives people a chance to debug other memory problems.
4974 With these changes, a new set of functions and macros have appeared:
4976 CRYPTO_set_mem_debug_functions() [F]
4977 CRYPTO_get_mem_debug_functions() [F]
4978 CRYPTO_dbg_set_options() [F]
4979 CRYPTO_dbg_get_options() [F]
4980 CRYPTO_malloc_debug_init() [M]
4982 The memory debug functions are NULL by default, unless the library
4983 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
4984 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
4985 gives the standard debugging functions that come with OpenSSL) or
4986 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
4987 provided by the library user) must be used. When the standard
4988 debugging functions are used, CRYPTO_dbg_set_options can be used to
4989 request additional information:
4990 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
4991 the CRYPTO_MDEBUG_xxx macro when compiling the library.
4993 Also, things like CRYPTO_set_mem_functions will always give the
4994 expected result (the new set of functions is used for allocation
4995 and deallocation) at all times, regardless of platform and compiler
4998 To finish it up, some functions that were never use in any other
4999 way than through macros have a new API and new semantic:
5002 CRYPTO_dbg_realloc()
5005 All macros of value have retained their old syntax.
5006 [Richard Levitte and Bodo Moeller]
5008 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
5009 ordering of SMIMECapabilities wasn't in "strength order" and there
5010 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
5014 *) Some ASN1 types with illegal zero length encoding (INTEGER,
5015 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
5016 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
5018 *) Merge in my S/MIME library for OpenSSL. This provides a simple
5019 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
5020 functionality to handle multipart/signed properly) and a utility
5021 called 'smime' to call all this stuff. This is based on code I
5022 originally wrote for Celo who have kindly allowed it to be
5023 included in OpenSSL.
5026 *) Add variants des_set_key_checked and des_set_key_unchecked of
5027 des_set_key (aka des_key_sched). Global variable des_check_key
5028 decides which of these is called by des_set_key; this way
5029 des_check_key behaves as it always did, but applications and
5030 the library itself, which was buggy for des_check_key == 1,
5031 have a cleaner way to pick the version they need.
5034 *) New function PKCS12_newpass() which changes the password of a
5038 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
5039 dynamic mix. In both cases the ids can be used as an index into the
5040 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
5041 functions so they accept a list of the field values and the
5042 application doesn't need to directly manipulate the X509_TRUST
5046 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
5050 *) Modify the way the V3 extension code looks up extensions. This now
5051 works in a similar way to the object code: we have some "standard"
5052 extensions in a static table which is searched with OBJ_bsearch()
5053 and the application can add dynamic ones if needed. The file
5054 crypto/x509v3/ext_dat.h now has the info: this file needs to be
5055 updated whenever a new extension is added to the core code and kept
5056 in ext_nid order. There is a simple program 'tabtest.c' which checks
5057 this. New extensions are not added too often so this file can readily
5058 be maintained manually.
5060 There are two big advantages in doing things this way. The extensions
5061 can be looked up immediately and no longer need to be "added" using
5062 X509V3_add_standard_extensions(): this function now does nothing.
5063 [Side note: I get *lots* of email saying the extension code doesn't
5064 work because people forget to call this function]
5065 Also no dynamic allocation is done unless new extensions are added:
5066 so if we don't add custom extensions there is no need to call
5067 X509V3_EXT_cleanup().
5070 *) Modify enc utility's salting as follows: make salting the default. Add a
5071 magic header, so unsalted files fail gracefully instead of just decrypting
5072 to garbage. This is because not salting is a big security hole, so people
5073 should be discouraged from doing it.
5076 *) Fixes and enhancements to the 'x509' utility. It allowed a message
5077 digest to be passed on the command line but it only used this
5078 parameter when signing a certificate. Modified so all relevant
5079 operations are affected by the digest parameter including the
5080 -fingerprint and -x509toreq options. Also -x509toreq choked if a
5081 DSA key was used because it didn't fix the digest.
5084 *) Initial certificate chain verify code. Currently tests the untrusted
5085 certificates for consistency with the verify purpose (which is set
5086 when the X509_STORE_CTX structure is set up) and checks the pathlength.
5088 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
5089 this is because it will reject chains with invalid extensions whereas
5090 every previous version of OpenSSL and SSLeay made no checks at all.
5092 Trust code: checks the root CA for the relevant trust settings. Trust
5093 settings have an initial value consistent with the verify purpose: e.g.
5094 if the verify purpose is for SSL client use it expects the CA to be
5095 trusted for SSL client use. However the default value can be changed to
5096 permit custom trust settings: one example of this would be to only trust
5097 certificates from a specific "secure" set of CAs.
5099 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
5100 which should be used for version portability: especially since the
5101 verify structure is likely to change more often now.
5103 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
5104 to set them. If not set then assume SSL clients will verify SSL servers
5107 Two new options to the verify program: -untrusted allows a set of
5108 untrusted certificates to be passed in and -purpose which sets the
5109 intended purpose of the certificate. If a purpose is set then the
5110 new chain verify code is used to check extension consistency.
5113 *) Support for the authority information access extension.
5116 *) Modify RSA and DSA PEM read routines to transparently handle
5117 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
5118 public keys in a format compatible with certificate
5119 SubjectPublicKeyInfo structures. Unfortunately there were already
5120 functions called *_PublicKey_* which used various odd formats so
5121 these are retained for compatibility: however the DSA variants were
5122 never in a public release so they have been deleted. Changed dsa/rsa
5123 utilities to handle the new format: note no releases ever handled public
5124 keys so we should be OK.
5126 The primary motivation for this change is to avoid the same fiasco
5127 that dogs private keys: there are several incompatible private key
5128 formats some of which are standard and some OpenSSL specific and
5129 require various evil hacks to allow partial transparent handling and
5130 even then it doesn't work with DER formats. Given the option anything
5131 other than PKCS#8 should be dumped: but the other formats have to
5132 stay in the name of compatibility.
5134 With public keys and the benefit of hindsight one standard format
5135 is used which works with EVP_PKEY, RSA or DSA structures: though
5136 it clearly returns an error if you try to read the wrong kind of key.
5138 Added a -pubkey option to the 'x509' utility to output the public key.
5139 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
5140 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
5141 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
5142 that do the same as the EVP_PKEY_assign_*() except they up the
5143 reference count of the added key (they don't "swallow" the
5147 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
5148 CRLs would fail if the file contained no certificates or no CRLs:
5149 added a new function to read in both types and return the number
5150 read: this means that if none are read it will be an error. The
5151 DER versions of the certificate and CRL reader would always fail
5152 because it isn't possible to mix certificates and CRLs in DER format
5153 without choking one or the other routine. Changed this to just read
5154 a certificate: this is the best we can do. Also modified the code
5155 in apps/verify.c to take notice of return codes: it was previously
5156 attempting to read in certificates from NULL pointers and ignoring
5157 any errors: this is one reason why the cert and CRL reader seemed
5158 to work. It doesn't check return codes from the default certificate
5159 routines: these may well fail if the certificates aren't installed.
5162 *) Code to support otherName option in GeneralName.
5165 *) First update to verify code. Change the verify utility
5166 so it warns if it is passed a self signed certificate:
5167 for consistency with the normal behaviour. X509_verify
5168 has been modified to it will now verify a self signed
5169 certificate if *exactly* the same certificate appears
5170 in the store: it was previously impossible to trust a
5171 single self signed certificate. This means that:
5172 openssl verify ss.pem
5173 now gives a warning about a self signed certificate but
5174 openssl verify -CAfile ss.pem ss.pem
5178 *) For servers, store verify_result in SSL_SESSION data structure
5179 (and add it to external session representation).
5180 This is needed when client certificate verifications fails,
5181 but an application-provided verification callback (set by
5182 SSL_CTX_set_cert_verify_callback) allows accepting the session
5183 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
5184 but returns 1): When the session is reused, we have to set
5185 ssl->verify_result to the appropriate error code to avoid
5187 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
5189 *) Fix a bug in the new PKCS#7 code: it didn't consider the
5190 case in PKCS7_dataInit() where the signed PKCS7 structure
5191 didn't contain any existing data because it was being created.
5192 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
5194 *) Add a salt to the key derivation routines in enc.c. This
5195 forms the first 8 bytes of the encrypted file. Also add a
5196 -S option to allow a salt to be input on the command line.
5199 *) New function X509_cmp(). Oddly enough there wasn't a function
5200 to compare two certificates. We do this by working out the SHA1
5201 hash and comparing that. X509_cmp() will be needed by the trust
5205 *) SSL_get1_session() is like SSL_get_session(), but increments
5206 the reference count in the SSL_SESSION returned.
5207 [Geoff Thorpe <geoff@eu.c2.net>]
5209 *) Fix for 'req': it was adding a null to request attributes.
5210 Also change the X509_LOOKUP and X509_INFO code to handle
5211 certificate auxiliary information.
5214 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
5218 *) Add the possibility to add extra information to the memory leak
5219 detecting output, to form tracebacks, showing from where each
5220 allocation was originated: CRYPTO_push_info("constant string") adds
5221 the string plus current file name and line number to a per-thread
5222 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
5223 is like calling CYRPTO_pop_info() until the stack is empty.
5224 Also updated memory leak detection code to be multi-thread-safe.
5227 *) Add options -text and -noout to pkcs7 utility and delete the
5228 encryption options which never did anything. Update docs.
5231 *) Add options to some of the utilities to allow the pass phrase
5232 to be included on either the command line (not recommended on
5233 OSes like Unix) or read from the environment. Update the
5234 manpages and fix a few bugs.
5237 *) Add a few manpages for some of the openssl commands.
5240 *) Fix the -revoke option in ca. It was freeing up memory twice,
5241 leaking and not finding already revoked certificates.
5244 *) Extensive changes to support certificate auxiliary information.
5245 This involves the use of X509_CERT_AUX structure and X509_AUX
5246 functions. An X509_AUX function such as PEM_read_X509_AUX()
5247 can still read in a certificate file in the usual way but it
5248 will also read in any additional "auxiliary information". By
5249 doing things this way a fair degree of compatibility can be
5250 retained: existing certificates can have this information added
5251 using the new 'x509' options.
5253 Current auxiliary information includes an "alias" and some trust
5254 settings. The trust settings will ultimately be used in enhanced
5255 certificate chain verification routines: currently a certificate
5256 can only be trusted if it is self signed and then it is trusted
5260 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
5261 The problem was that one of the replacement routines had not been working
5262 since SSLeay releases. For now the offending routine has been replaced
5263 with non-optimised assembler. Even so, this now gives around 95%
5264 performance improvement for 1024 bit RSA signs.
5267 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
5268 handling. Most clients have the effective key size in bits equal to
5269 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
5270 A few however don't do this and instead use the size of the decrypted key
5271 to determine the RC2 key length and the AlgorithmIdentifier to determine
5272 the effective key length. In this case the effective key length can still
5273 be 40 bits but the key length can be 168 bits for example. This is fixed
5274 by manually forcing an RC2 key into the EVP_PKEY structure because the
5275 EVP code can't currently handle unusual RC2 key sizes: it always assumes
5276 the key length and effective key length are equal.
5279 *) Add a bunch of functions that should simplify the creation of
5280 X509_NAME structures. Now you should be able to do:
5281 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
5282 and have it automatically work out the correct field type and fill in
5283 the structures. The more adventurous can try:
5284 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
5285 and it will (hopefully) work out the correct multibyte encoding.
5288 *) Change the 'req' utility to use the new field handling and multibyte
5289 copy routines. Before the DN field creation was handled in an ad hoc
5290 way in req, ca, and x509 which was rather broken and didn't support
5291 BMPStrings or UTF8Strings. Since some software doesn't implement
5292 BMPStrings or UTF8Strings yet, they can be enabled using the config file
5293 using the dirstring_type option. See the new comment in the default
5294 openssl.cnf for more info.
5297 *) Make crypto/rand/md_rand.c more robust:
5298 - Assure unique random numbers after fork().
5299 - Make sure that concurrent threads access the global counter and
5300 md serializably so that we never lose entropy in them
5301 or use exactly the same state in multiple threads.
5302 Access to the large state is not always serializable because
5303 the additional locking could be a performance killer, and
5304 md should be large enough anyway.
5307 *) New file apps/app_rand.c with commonly needed functionality
5308 for handling the random seed file.
5310 Use the random seed file in some applications that previously did not:
5312 dsaparam -genkey (which also ignored its '-rand' option),
5315 x509 (when signing).
5316 Except on systems with /dev/urandom, it is crucial to have a random
5317 seed file at least for key creation, DSA signing, and for DH exchanges;
5318 for RSA signatures we could do without one.
5320 gendh and gendsa (unlike genrsa) used to read only the first byte
5321 of each file listed in the '-rand' option. The function as previously
5322 found in genrsa is now in app_rand.c and is used by all programs
5323 that support '-rand'.
5326 *) In RAND_write_file, use mode 0600 for creating files;
5327 don't just chmod when it may be too late.
5330 *) Report an error from X509_STORE_load_locations
5331 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
5334 *) New function ASN1_mbstring_copy() this copies a string in either
5335 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
5336 into an ASN1_STRING type. A mask of permissible types is passed
5337 and it chooses the "minimal" type to use or an error if not type
5341 *) Add function equivalents to the various macros in asn1.h. The old
5342 macros are retained with an M_ prefix. Code inside the library can
5343 use the M_ macros. External code (including the openssl utility)
5344 should *NOT* in order to be "shared library friendly".
5347 *) Add various functions that can check a certificate's extensions
5348 to see if it usable for various purposes such as SSL client,
5349 server or S/MIME and CAs of these types. This is currently
5350 VERY EXPERIMENTAL but will ultimately be used for certificate chain
5351 verification. Also added a -purpose flag to x509 utility to
5352 print out all the purposes.
5355 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
5359 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
5360 for, obtain and decode and extension and obtain its critical flag.
5361 This allows all the necessary extension code to be handled in a
5362 single function call.
5365 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
5366 platforms. See crypto/rc4/rc4_enc.c for further details.
5369 *) New -noout option to asn1parse. This causes no output to be produced
5370 its main use is when combined with -strparse and -out to extract data
5371 from a file (which may not be in ASN.1 format).
5374 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
5375 when producing the local key id.
5376 [Richard Levitte <levitte@stacken.kth.se>]
5378 *) New option -dhparam in s_server. This allows a DH parameter file to be
5379 stated explicitly. If it is not stated then it tries the first server
5380 certificate file. The previous behaviour hard coded the filename
5384 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
5385 a public key to be input or output. For example:
5386 openssl rsa -in key.pem -pubout -out pubkey.pem
5387 Also added necessary DSA public key functions to handle this.
5390 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
5391 in the message. This was handled by allowing
5392 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
5393 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
5395 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
5396 to the end of the strings whereas this didn't. This would cause problems
5397 if strings read with d2i_ASN1_bytes() were later modified.
5398 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
5400 *) Fix for base64 decode bug. When a base64 bio reads only one line of
5401 data and it contains EOF it will end up returning an error. This is
5402 caused by input 46 bytes long. The cause is due to the way base64
5403 BIOs find the start of base64 encoded data. They do this by trying a
5404 trial decode on each line until they find one that works. When they
5405 do a flag is set and it starts again knowing it can pass all the
5406 data directly through the decoder. Unfortunately it doesn't reset
5407 the context it uses. This means that if EOF is reached an attempt
5408 is made to pass two EOFs through the context and this causes the
5409 resulting error. This can also cause other problems as well. As is
5410 usual with these problems it takes *ages* to find and the fix is
5411 trivial: move one line.
5412 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
5414 *) Ugly workaround to get s_client and s_server working under Windows. The
5415 old code wouldn't work because it needed to select() on sockets and the
5416 tty (for keypresses and to see if data could be written). Win32 only
5417 supports select() on sockets so we select() with a 1s timeout on the
5418 sockets and then see if any characters are waiting to be read, if none
5419 are present then we retry, we also assume we can always write data to
5420 the tty. This isn't nice because the code then blocks until we've
5421 received a complete line of data and it is effectively polling the
5422 keyboard at 1s intervals: however it's quite a bit better than not
5423 working at all :-) A dedicated Windows application might handle this
5424 with an event loop for example.
5427 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
5428 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
5429 will be called when RSA_sign() and RSA_verify() are used. This is useful
5430 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
5431 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
5432 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
5433 This necessitated the support of an extra signature type NID_md5_sha1
5434 for SSL signatures and modifications to the SSL library to use it instead
5435 of calling RSA_public_decrypt() and RSA_private_encrypt().
5438 *) Add new -verify -CAfile and -CApath options to the crl program, these
5439 will lookup a CRL issuers certificate and verify the signature in a
5440 similar way to the verify program. Tidy up the crl program so it
5441 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
5442 less strict. It will now permit CRL extensions even if it is not
5443 a V2 CRL: this will allow it to tolerate some broken CRLs.
5446 *) Initialize all non-automatic variables each time one of the openssl
5447 sub-programs is started (this is necessary as they may be started
5448 multiple times from the "OpenSSL>" prompt).
5449 [Lennart Bang, Bodo Moeller]
5451 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
5452 removing all other RSA functionality (this is what NO_RSA does). This
5453 is so (for example) those in the US can disable those operations covered
5454 by the RSA patent while allowing storage and parsing of RSA keys and RSA
5458 *) Non-copying interface to BIO pairs.
5459 (still largely untested)
5462 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
5463 ASCII string. This was handled independently in various places before.
5466 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
5467 UTF8 strings a character at a time.
5470 *) Use client_version from client hello to select the protocol
5471 (s23_srvr.c) and for RSA client key exchange verification
5472 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
5475 *) Add various utility functions to handle SPKACs, these were previously
5476 handled by poking round in the structure internals. Added new function
5477 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
5478 print, verify and generate SPKACs. Based on an original idea from
5479 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
5482 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
5485 *) Allow the config file extension section to be overwritten on the
5486 command line. Based on an original idea from Massimiliano Pala
5487 <madwolf@comune.modena.it>. The new option is called -extensions
5488 and can be applied to ca, req and x509. Also -reqexts to override
5489 the request extensions in req and -crlexts to override the crl extensions
5493 *) Add new feature to the SPKAC handling in ca. Now you can include
5494 the same field multiple times by preceding it by "XXXX." for example:
5497 this is the same syntax as used in the req config file.
5500 *) Allow certificate extensions to be added to certificate requests. These
5501 are specified in a 'req_extensions' option of the req section of the
5502 config file. They can be printed out with the -text option to req but
5503 are otherwise ignored at present.
5506 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
5507 data read consists of only the final block it would not decrypted because
5508 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
5509 A misplaced 'break' also meant the decrypted final block might not be
5510 copied until the next read.
5513 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
5514 a few extra parameters to the DH structure: these will be useful if
5515 for example we want the value of 'q' or implement X9.42 DH.
5518 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
5519 provides hooks that allow the default DSA functions or functions on a
5520 "per key" basis to be replaced. This allows hardware acceleration and
5521 hardware key storage to be handled without major modification to the
5522 library. Also added low level modexp hooks and CRYPTO_EX structure and
5523 associated functions.
5526 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
5527 as "read only": it can't be written to and the buffer it points to will
5528 not be freed. Reading from a read only BIO is much more efficient than
5529 a normal memory BIO. This was added because there are several times when
5530 an area of memory needs to be read from a BIO. The previous method was
5531 to create a memory BIO and write the data to it, this results in two
5532 copies of the data and an O(n^2) reading algorithm. There is a new
5533 function BIO_new_mem_buf() which creates a read only memory BIO from
5534 an area of memory. Also modified the PKCS#7 routines to use read only
5538 *) Bugfix: ssl23_get_client_hello did not work properly when called in
5539 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
5540 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
5541 but a retry condition occured while trying to read the rest.
5544 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
5545 NID_pkcs7_encrypted by default: this was wrong since this should almost
5546 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
5547 the encrypted data type: this is a more sensible place to put it and it
5548 allows the PKCS#12 code to be tidied up that duplicated this
5552 *) Changed obj_dat.pl script so it takes its input and output files on
5553 the command line. This should avoid shell escape redirection problems
5557 *) Initial support for certificate extension requests, these are included
5558 in things like Xenroll certificate requests. Included functions to allow
5559 extensions to be obtained and added.
5562 *) -crlf option to s_client and s_server for sending newlines as
5563 CRLF (as required by many protocols).
5566 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
5568 *) Install libRSAglue.a when OpenSSL is built with RSAref.
5569 [Ralf S. Engelschall]
5571 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
5572 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
5574 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
5578 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
5579 DH parameters/keys (q is lost during that conversion, but the resulting
5580 DH parameters contain its length).
5582 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
5583 much faster than DH_generate_parameters (which creates parameters
5584 where p = 2*q + 1), and also the smaller q makes DH computations
5585 much more efficient (160-bit exponentiation instead of 1024-bit
5586 exponentiation); so this provides a convenient way to support DHE
5587 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
5588 utter importance to use
5589 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
5591 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
5592 when such DH parameters are used, because otherwise small subgroup
5593 attacks may become possible!
5596 *) Avoid memory leak in i2d_DHparams.
5599 *) Allow the -k option to be used more than once in the enc program:
5600 this allows the same encrypted message to be read by multiple recipients.
5603 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
5604 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
5605 it will always use the numerical form of the OID, even if it has a short
5609 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
5610 method only got called if p,q,dmp1,dmq1,iqmp components were present,
5611 otherwise bn_mod_exp was called. In the case of hardware keys for example
5612 no private key components need be present and it might store extra data
5613 in the RSA structure, which cannot be accessed from bn_mod_exp.
5614 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
5615 private key operations.
5618 *) Added support for SPARC Linux.
5621 *) pem_password_cb function type incompatibly changed from
5622 typedef int pem_password_cb(char *buf, int size, int rwflag);
5624 ....(char *buf, int size, int rwflag, void *userdata);
5625 so that applications can pass data to their callbacks:
5626 The PEM[_ASN1]_{read,write}... functions and macros now take an
5627 additional void * argument, which is just handed through whenever
5628 the password callback is called.
5629 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
5631 New function SSL_CTX_set_default_passwd_cb_userdata.
5633 Compatibility note: As many C implementations push function arguments
5634 onto the stack in reverse order, the new library version is likely to
5635 interoperate with programs that have been compiled with the old
5636 pem_password_cb definition (PEM_whatever takes some data that
5637 happens to be on the stack as its last argument, and the callback
5638 just ignores this garbage); but there is no guarantee whatsoever that
5641 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
5642 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
5643 problems not only on Windows, but also on some Unix platforms.
5644 To avoid problematic command lines, these definitions are now in an
5645 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
5646 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
5649 *) MIPS III/IV assembler module is reimplemented.
5652 *) More DES library cleanups: remove references to srand/rand and
5653 delete an unused file.
5656 *) Add support for the the free Netwide assembler (NASM) under Win32,
5657 since not many people have MASM (ml) and it can be hard to obtain.
5658 This is currently experimental but it seems to work OK and pass all
5659 the tests. Check out INSTALL.W32 for info.
5662 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
5663 without temporary keys kept an extra copy of the server key,
5664 and connections with temporary keys did not free everything in case
5668 *) New function RSA_check_key and new openssl rsa option -check
5669 for verifying the consistency of RSA keys.
5670 [Ulf Moeller, Bodo Moeller]
5672 *) Various changes to make Win32 compile work:
5673 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
5674 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
5675 comparison" warnings.
5676 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
5679 *) Add a debugging option to PKCS#5 v2 key generation function: when
5680 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
5681 derived keys are printed to stderr.
5684 *) Copy the flags in ASN1_STRING_dup().
5685 [Roman E. Pavlov <pre@mo.msk.ru>]
5687 *) The x509 application mishandled signing requests containing DSA
5688 keys when the signing key was also DSA and the parameters didn't match.
5690 It was supposed to omit the parameters when they matched the signing key:
5691 the verifying software was then supposed to automatically use the CA's
5692 parameters if they were absent from the end user certificate.
5694 Omitting parameters is no longer recommended. The test was also
5695 the wrong way round! This was probably due to unusual behaviour in
5696 EVP_cmp_parameters() which returns 1 if the parameters match.
5697 This meant that parameters were omitted when they *didn't* match and
5698 the certificate was useless. Certificates signed with 'ca' didn't have
5700 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
5702 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
5703 The interface is as follows:
5704 Applications can use
5705 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
5706 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
5707 "off" is now the default.
5708 The library internally uses
5709 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
5710 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
5711 to disable memory-checking temporarily.
5713 Some inconsistent states that previously were possible (and were
5714 even the default) are now avoided.
5716 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
5717 with each memory chunk allocated; this is occasionally more helpful
5718 than just having a counter.
5720 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
5722 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
5726 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
5727 which largely parallels "options", but is for changing API behaviour,
5728 whereas "options" are about protocol behaviour.
5729 Initial "mode" flags are:
5731 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
5732 a single record has been written.
5733 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
5734 retries use the same buffer location.
5735 (But all of the contents must be
5739 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
5742 *) Fix problems with no-hmac etc.
5743 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
5745 *) New functions RSA_get_default_method(), RSA_set_method() and
5746 RSA_get_method(). These allows replacement of RSA_METHODs without having
5747 to mess around with the internals of an RSA structure.
5750 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
5751 Also really enable memory leak checks in openssl.c and in some
5753 [Chad C. Mulligan, Bodo Moeller]
5755 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
5756 up the length of negative integers. This has now been simplified to just
5757 store the length when it is first determined and use it later, rather
5758 than trying to keep track of where data is copied and updating it to
5760 [Steve Henson, reported by Brien Wheeler
5761 <bwheeler@authentica-security.com>]
5763 *) Add a new function PKCS7_signatureVerify. This allows the verification
5764 of a PKCS#7 signature but with the signing certificate passed to the
5765 function itself. This contrasts with PKCS7_dataVerify which assumes the
5766 certificate is present in the PKCS#7 structure. This isn't always the
5767 case: certificates can be omitted from a PKCS#7 structure and be
5768 distributed by "out of band" means (such as a certificate database).
5771 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
5772 function prototypes in pem.h, also change util/mkdef.pl to add the
5773 necessary function names.
5776 *) mk1mf.pl (used by Windows builds) did not properly read the
5777 options set by Configure in the top level Makefile, and Configure
5778 was not even able to write more than one option correctly.
5779 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
5782 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
5783 file to be loaded from a BIO or FILE pointer. The BIO version will
5784 for example allow memory BIOs to contain config info.
5787 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
5788 Whoever hopes to achieve shared-library compatibility across versions
5789 must use this, not the compile-time macro.
5790 (Exercise 0.9.4: Which is the minimum library version required by
5792 Note: All this applies only to multi-threaded programs, others don't
5796 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
5797 through a BIO pair triggered the default case, i.e.
5798 SSLerr(...,SSL_R_UNKNOWN_STATE).
5801 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
5802 can use the SSL library even if none of the specific BIOs is
5806 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
5807 for the encoded length.
5808 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
5810 *) Add initial documentation of the X509V3 functions.
5813 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
5814 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
5815 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
5816 secure PKCS#8 private key format with a high iteration count.
5819 *) Fix determination of Perl interpreter: A perl or perl5
5820 _directory_ in $PATH was also accepted as the interpreter.
5821 [Ralf S. Engelschall]
5823 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
5824 wrong with it but it was very old and did things like calling
5825 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
5829 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
5830 to use the new extension code.
5833 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
5834 with macros. This should make it easier to change their form, add extra
5835 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
5839 *) Add to configuration table a new entry that can specify an alternative
5840 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
5841 according to Mark Crispin <MRC@Panda.COM>.
5845 *) DES CBC did not update the IV. Weird.
5848 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
5849 Changing the behaviour of the former might break existing programs --
5850 where IV updating is needed, des_ncbc_encrypt can be used.
5853 *) When bntest is run from "make test" it drives bc to check its
5854 calculations, as well as internally checking them. If an internal check
5855 fails, it needs to cause bc to give a non-zero result or make test carries
5856 on without noticing the failure. Fixed.
5859 *) DES library cleanups.
5862 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
5863 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
5864 ciphers. NOTE: although the key derivation function has been verified
5865 against some published test vectors it has not been extensively tested
5866 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
5870 *) Instead of "mkdir -p", which is not fully portable, use new
5871 Perl script "util/mkdir-p.pl".
5874 *) Rewrite the way password based encryption (PBE) is handled. It used to
5875 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
5876 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
5877 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
5878 the 'parameter' field of the AlgorithmIdentifier is passed to the
5879 underlying key generation function so it must do its own ASN1 parsing.
5880 This has also changed the EVP_PBE_CipherInit() function which now has a
5881 'parameter' argument instead of literal salt and iteration count values
5882 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
5885 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
5886 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
5887 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
5888 KEY" because this clashed with PKCS#8 unencrypted string. Since this
5889 value was just used as a "magic string" and not used directly its
5890 value doesn't matter.
5893 *) Introduce some semblance of const correctness to BN. Shame C doesn't
5897 *) "linux-sparc64" configuration (ultrapenguin).
5898 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
5899 "linux-sparc" configuration.
5900 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
5902 *) config now generates no-xxx options for missing ciphers.
5905 *) Support the EBCDIC character set (work in progress).
5906 File ebcdic.c not yet included because it has a different license.
5907 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
5909 *) Support BS2000/OSD-POSIX.
5910 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
5912 *) Make callbacks for key generation use void * instead of char *.
5915 *) Make S/MIME samples compile (not yet tested).
5918 *) Additional typesafe stacks.
5921 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
5925 Changes between 0.9.3 and 0.9.3a [29 May 1999]
5927 *) New configuration variant "sco5-gcc".
5929 *) Updated some demos.
5930 [Sean O Riordain, Wade Scholine]
5932 *) Add missing BIO_free at exit of pkcs12 application.
5935 *) Fix memory leak in conf.c.
5938 *) Updates for Win32 to assembler version of MD5.
5941 *) Set #! path to perl in apps/der_chop to where we found it
5942 instead of using a fixed path.
5945 *) SHA library changes for irix64-mips4-cc.
5948 *) Improvements for VMS support.
5952 Changes between 0.9.2b and 0.9.3 [24 May 1999]
5954 *) Bignum library bug fix. IRIX 6 passes "make test" now!
5955 This also avoids the problems with SC4.2 and unpatched SC5.
5956 [Andy Polyakov <appro@fy.chalmers.se>]
5958 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
5959 These are required because of the typesafe stack would otherwise break
5960 existing code. If old code used a structure member which used to be STACK
5961 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
5962 sk_num or sk_value it would produce an error because the num, data members
5963 are not present in STACK_OF. Now it just produces a warning. sk_set
5964 replaces the old method of assigning a value to sk_value
5965 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
5966 that does this will no longer work (and should use sk_set instead) but
5967 this could be regarded as a "questionable" behaviour anyway.
5970 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
5971 correctly handle encrypted S/MIME data.
5974 *) Change type of various DES function arguments from des_cblock
5975 (which means, in function argument declarations, pointer to char)
5976 to des_cblock * (meaning pointer to array with 8 char elements),
5977 which allows the compiler to do more typechecking; it was like
5978 that back in SSLeay, but with lots of ugly casts.
5980 Introduce new type const_des_cblock.
5983 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
5984 problems: find RecipientInfo structure that matches recipient certificate
5985 and initialise the ASN1 structures properly based on passed cipher.
5988 *) Belatedly make the BN tests actually check the results.
5991 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
5992 to and from BNs: it was completely broken. New compilation option
5993 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
5994 key elements as negative integers.
5997 *) Reorganize and speed up MD5.
5998 [Andy Polyakov <appro@fy.chalmers.se>]
6001 [Richard Levitte <richard@levitte.org>]
6003 *) New option -out to asn1parse to allow the parsed structure to be
6004 output to a file. This is most useful when combined with the -strparse
6005 option to examine the output of things like OCTET STRINGS.
6008 *) Make SSL library a little more fool-proof by not requiring any longer
6009 that SSL_set_{accept,connect}_state be called before
6010 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
6011 in many applications because usually everything *appeared* to work as
6012 intended anyway -- now it really works as intended).
6015 *) Move openssl.cnf out of lib/.
6018 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
6019 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
6020 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
6021 [Ralf S. Engelschall]
6023 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
6024 handle PKCS#7 enveloped data properly.
6025 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
6027 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
6028 copying pointers. The cert_st handling is changed by this in
6029 various ways (and thus what used to be known as ctx->default_cert
6030 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
6031 any longer when s->cert does not give us what we need).
6032 ssl_cert_instantiate becomes obsolete by this change.
6033 As soon as we've got the new code right (possibly it already is?),
6034 we have solved a couple of bugs of the earlier code where s->cert
6035 was used as if it could not have been shared with other SSL structures.
6037 Note that using the SSL API in certain dirty ways now will result
6038 in different behaviour than observed with earlier library versions:
6039 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
6040 does not influence s as it used to.
6042 In order to clean up things more thoroughly, inside SSL_SESSION
6043 we don't use CERT any longer, but a new structure SESS_CERT
6044 that holds per-session data (if available); currently, this is
6045 the peer's certificate chain and, for clients, the server's certificate
6046 and temporary key. CERT holds only those values that can have
6047 meaningful defaults in an SSL_CTX.
6050 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
6051 from the internal representation. Various PKCS#7 fixes: remove some
6052 evil casts and set the enc_dig_alg field properly based on the signing
6056 *) Allow PKCS#12 password to be set from the command line or the
6057 environment. Let 'ca' get its config file name from the environment
6058 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
6062 *) Allow certificate policies extension to use an IA5STRING for the
6063 organization field. This is contrary to the PKIX definition but
6064 VeriSign uses it and IE5 only recognises this form. Document 'x509'
6068 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
6069 without disallowing inline assembler and the like for non-pedantic builds.
6072 *) Support Borland C++ builder.
6073 [Janez Jere <jj@void.si>, modified by Ulf Möller]
6078 *) SHA-1 cleanups and performance enhancements.
6079 [Andy Polyakov <appro@fy.chalmers.se>]
6081 *) Sparc v8plus assembler for the bignum library.
6082 [Andy Polyakov <appro@fy.chalmers.se>]
6084 *) Accept any -xxx and +xxx compiler options in Configure.
6087 *) Update HPUX configuration.
6090 *) Add missing sk_<type>_unshift() function to safestack.h
6091 [Ralf S. Engelschall]
6093 *) New function SSL_CTX_use_certificate_chain_file that sets the
6094 "extra_cert"s in addition to the certificate. (This makes sense
6095 only for "PEM" format files, as chains as a whole are not
6099 *) Support verify_depth from the SSL API.
6100 x509_vfy.c had what can be considered an off-by-one-error:
6101 Its depth (which was not part of the external interface)
6102 was actually counting the number of certificates in a chain;
6103 now it really counts the depth.
6106 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
6107 instead of X509err, which often resulted in confusing error
6108 messages since the error codes are not globally unique
6109 (e.g. an alleged error in ssl3_accept when a certificate
6110 didn't match the private key).
6112 *) New function SSL_CTX_set_session_id_context that allows to set a default
6113 value (so that you don't need SSL_set_session_id_context for each
6114 connection using the SSL_CTX).
6117 *) OAEP decoding bug fix.
6120 *) Support INSTALL_PREFIX for package builders, as proposed by
6124 *) New Configure options "threads" and "no-threads". For systems
6125 where the proper compiler options are known (currently Solaris
6126 and Linux), "threads" is the default.
6129 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
6132 *) Install various scripts to $(OPENSSLDIR)/misc, not to
6133 $(INSTALLTOP)/bin -- they shouldn't clutter directories
6134 such as /usr/local/bin.
6137 *) "make linux-shared" to build shared libraries.
6138 [Niels Poppe <niels@netbox.org>]
6140 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
6143 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
6144 extension adding in x509 utility.
6147 *) Remove NOPROTO sections and error code comments.
6150 *) Partial rewrite of the DEF file generator to now parse the ANSI
6154 *) New Configure options --prefix=DIR and --openssldir=DIR.
6157 *) Complete rewrite of the error code script(s). It is all now handled
6158 by one script at the top level which handles error code gathering,
6159 header rewriting and C source file generation. It should be much better
6160 than the old method: it now uses a modified version of Ulf's parser to
6161 read the ANSI prototypes in all header files (thus the old K&R definitions
6162 aren't needed for error creation any more) and do a better job of
6163 translating function codes into names. The old 'ASN1 error code imbedded
6164 in a comment' is no longer necessary and it doesn't use .err files which
6165 have now been deleted. Also the error code call doesn't have to appear all
6166 on one line (which resulted in some large lines...).
6169 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
6172 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
6173 0 (which usually indicates a closed connection), but continue reading.
6176 *) Fix some race conditions.
6179 *) Add support for CRL distribution points extension. Add Certificate
6180 Policies and CRL distribution points documentation.
6183 *) Move the autogenerated header file parts to crypto/opensslconf.h.
6186 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
6187 8 of keying material. Merlin has also confirmed interop with this fix
6188 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
6189 [Merlin Hughes <merlin@baltimore.ie>]
6191 *) Fix lots of warnings.
6192 [Richard Levitte <levitte@stacken.kth.se>]
6194 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
6195 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
6196 [Richard Levitte <levitte@stacken.kth.se>]
6198 *) Fix problems with sizeof(long) == 8.
6199 [Andy Polyakov <appro@fy.chalmers.se>]
6201 *) Change functions to ANSI C.
6204 *) Fix typos in error codes.
6205 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
6207 *) Remove defunct assembler files from Configure.
6210 *) SPARC v8 assembler BIGNUM implementation.
6211 [Andy Polyakov <appro@fy.chalmers.se>]
6213 *) Support for Certificate Policies extension: both print and set.
6214 Various additions to support the r2i method this uses.
6217 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
6218 return a const string when you are expecting an allocated buffer.
6221 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
6222 types DirectoryString and DisplayText.
6225 *) Add code to allow r2i extensions to access the configuration database,
6226 add an LHASH database driver and add several ctx helper functions.
6229 *) Fix an evil bug in bn_expand2() which caused various BN functions to
6230 fail when they extended the size of a BIGNUM.
6233 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
6234 support typesafe stack.
6237 *) Fix typo in SSL_[gs]et_options().
6238 [Nils Frostberg <nils@medcom.se>]
6240 *) Delete various functions and files that belonged to the (now obsolete)
6241 old X509V3 handling code.
6244 *) New Configure option "rsaref".
6247 *) Don't auto-generate pem.h.
6250 *) Introduce type-safe ASN.1 SETs.
6253 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
6254 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
6256 *) Introduce type-safe STACKs. This will almost certainly break lots of code
6257 that links with OpenSSL (well at least cause lots of warnings), but fear
6258 not: the conversion is trivial, and it eliminates loads of evil casts. A
6259 few STACKed things have been converted already. Feel free to convert more.
6260 In the fullness of time, I'll do away with the STACK type altogether.
6263 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
6264 specified in <certfile> by updating the entry in the index.txt file.
6265 This way one no longer has to edit the index.txt file manually for
6266 revoking a certificate. The -revoke option does the gory details now.
6267 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
6269 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
6270 `-text' option at all and this way the `-noout -text' combination was
6271 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
6272 [Ralf S. Engelschall]
6274 *) Make sure a corresponding plain text error message exists for the
6275 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
6276 verify callback function determined that a certificate was revoked.
6277 [Ralf S. Engelschall]
6279 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
6280 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
6281 all available cipers including rc5, which was forgotten until now.
6282 In order to let the testing shell script know which algorithms
6283 are available, a new (up to now undocumented) command
6284 "openssl list-cipher-commands" is used.
6287 *) Bugfix: s_client occasionally would sleep in select() when
6288 it should have checked SSL_pending() first.
6291 *) New functions DSA_do_sign and DSA_do_verify to provide access to
6292 the raw DSA values prior to ASN.1 encoding.
6295 *) Tweaks to Configure
6296 [Niels Poppe <niels@netbox.org>]
6298 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
6302 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
6305 *) New config option to avoid instructions that are illegal on the 80386.
6306 The default code is faster, but requires at least a 486.
6309 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
6310 SSL2_SERVER_VERSION (not used at all) macros, which are now the
6311 same as SSL2_VERSION anyway.
6314 *) New "-showcerts" option for s_client.
6317 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
6318 application. Various cleanups and fixes.
6321 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
6322 modify error routines to work internally. Add error codes and PBE init
6323 to library startup routines.
6326 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
6327 packing functions to asn1 and evp. Changed function names and error
6328 codes along the way.
6331 *) PKCS12 integration: and so it begins... First of several patches to
6332 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
6333 objects to objects.h
6336 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
6337 and display support for Thawte strong extranet extension.
6340 *) Add LinuxPPC support.
6341 [Jeff Dubrule <igor@pobox.org>]
6343 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
6344 bn_div_words in alpha.s.
6345 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
6347 *) Make sure the RSA OAEP test is skipped under -DRSAref because
6348 OAEP isn't supported when OpenSSL is built with RSAref.
6349 [Ulf Moeller <ulf@fitug.de>]
6351 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
6352 so they no longer are missing under -DNOPROTO.
6353 [Soren S. Jorvang <soren@t.dk>]
6356 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
6358 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
6359 doesn't work when the session is reused. Coming soon!
6362 *) Fix a security hole, that allows sessions to be reused in the wrong
6363 context thus bypassing client cert protection! All software that uses
6364 client certs and session caches in multiple contexts NEEDS PATCHING to
6365 allow session reuse! A fuller solution is in the works.
6366 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
6368 *) Some more source tree cleanups (removed obsolete files
6369 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
6370 permission on "config" script to be executable) and a fix for the INSTALL
6372 [Ulf Moeller <ulf@fitug.de>]
6374 *) Remove some legacy and erroneous uses of malloc, free instead of
6376 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
6378 *) Make rsa_oaep_test return non-zero on error.
6379 [Ulf Moeller <ulf@fitug.de>]
6381 *) Add support for native Solaris shared libraries. Configure
6382 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
6383 if someone would make that last step automatic.
6384 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
6386 *) ctx_size was not built with the right compiler during "make links". Fixed.
6389 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
6390 except NULL ciphers". This means the default cipher list will no longer
6391 enable NULL ciphers. They need to be specifically enabled e.g. with
6392 the string "DEFAULT:eNULL".
6395 *) Fix to RSA private encryption routines: if p < q then it would
6396 occasionally produce an invalid result. This will only happen with
6397 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
6400 *) Be less restrictive and allow also `perl util/perlpath.pl
6401 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
6402 because this way one can also use an interpreter named `perl5' (which is
6403 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
6404 installed as `perl').
6405 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
6407 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
6408 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
6410 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
6411 advapi32.lib to Win32 build and change the pem test comparision
6412 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
6413 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
6414 and crypto/des/ede_cbcm_enc.c.
6417 *) DES quad checksum was broken on big-endian architectures. Fixed.
6420 *) Comment out two functions in bio.h that aren't implemented. Fix up the
6421 Win32 test batch file so it (might) work again. The Win32 test batch file
6422 is horrible: I feel ill....
6425 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
6426 in e_os.h. Audit of header files to check ANSI and non ANSI
6427 sections: 10 functions were absent from non ANSI section and not exported
6428 from Windows DLLs. Fixed up libeay.num for new functions.
6431 *) Make `openssl version' output lines consistent.
6432 [Ralf S. Engelschall]
6434 *) Fix Win32 symbol export lists for BIO functions: Added
6435 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
6436 to ms/libeay{16,32}.def.
6437 [Ralf S. Engelschall]
6439 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
6440 fine under Unix and passes some trivial tests I've now added. But the
6441 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
6442 added to make sure no one expects that this stuff really works in the
6443 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
6444 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
6446 [Ralf S. Engelschall]
6448 *) Fix the generation of two part addresses in perl.
6449 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
6451 *) Add config entry for Linux on MIPS.
6452 [John Tobey <jtobey@channel1.com>]
6454 *) Make links whenever Configure is run, unless we are on Windoze.
6457 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
6458 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
6462 *) Add a useful kludge to allow package maintainers to specify compiler and
6463 other platforms details on the command line without having to patch the
6464 Configure script everytime: One now can use ``perl Configure
6465 <id>:<details>'', i.e. platform ids are allowed to have details appended
6466 to them (seperated by colons). This is treated as there would be a static
6467 pre-configured entry in Configure's %table under key <id> with value
6468 <details> and ``perl Configure <id>'' is called. So, when you want to
6469 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
6470 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
6471 now, which overrides the FreeBSD-elf entry on-the-fly.
6472 [Ralf S. Engelschall]
6474 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
6477 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
6478 on the `perl Configure ...' command line. This way one can compile
6479 OpenSSL libraries with Position Independent Code (PIC) which is needed
6480 for linking it into DSOs.
6481 [Ralf S. Engelschall]
6483 *) Remarkably, export ciphers were totally broken and no-one had noticed!
6487 *) Cleaned up the LICENSE document: The official contact for any license
6488 questions now is the OpenSSL core team under openssl-core@openssl.org.
6489 And add a paragraph about the dual-license situation to make sure people
6490 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
6491 to the OpenSSL toolkit.
6492 [Ralf S. Engelschall]
6494 *) General source tree makefile cleanups: Made `making xxx in yyy...'
6495 display consistent in the source tree and replaced `/bin/rm' by `rm'.
6496 Additonally cleaned up the `make links' target: Remove unnecessary
6497 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
6498 to speed processing and no longer clutter the display with confusing
6499 stuff. Instead only the actually done links are displayed.
6500 [Ralf S. Engelschall]
6502 *) Permit null encryption ciphersuites, used for authentication only. It used
6503 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
6504 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
6508 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
6509 signed attributes when verifying signatures (this would break them),
6510 the detached data encoding was wrong and public keys obtained using
6511 X509_get_pubkey() weren't freed.
6514 *) Add text documentation for the BUFFER functions. Also added a work around
6515 to a Win95 console bug. This was triggered by the password read stuff: the
6516 last character typed gets carried over to the next fread(). If you were
6517 generating a new cert request using 'req' for example then the last
6518 character of the passphrase would be CR which would then enter the first
6522 *) Added the new `Includes OpenSSL Cryptography Software' button as
6523 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
6524 button and can be used by applications based on OpenSSL to show the
6525 relationship to the OpenSSL project.
6526 [Ralf S. Engelschall]
6528 *) Remove confusing variables in function signatures in files
6529 ssl/ssl_lib.c and ssl/ssl.h.
6530 [Lennart Bong <lob@kulthea.stacken.kth.se>]
6532 *) Don't install bss_file.c under PREFIX/include/
6533 [Lennart Bong <lob@kulthea.stacken.kth.se>]
6535 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
6536 functions that return function pointers and has support for NT specific
6537 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
6538 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
6539 unsigned to signed types: this was killing the Win32 compile.
6542 *) Add new certificate file to stack functions,
6543 SSL_add_dir_cert_subjects_to_stack() and
6544 SSL_add_file_cert_subjects_to_stack(). These largely supplant
6545 SSL_load_client_CA_file(), and can be used to add multiple certs easily
6546 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
6547 This means that Apache-SSL and similar packages don't have to mess around
6548 to add as many CAs as they want to the preferred list.
6551 *) Experiment with doxygen documentation. Currently only partially applied to
6553 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
6554 openssl.doxy as the configuration file.
6557 *) Get rid of remaining C++-style comments which strict C compilers hate.
6558 [Ralf S. Engelschall, pointed out by Carlos Amengual]
6560 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
6561 compiled in by default: it has problems with large keys.
6564 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
6565 DH private keys and/or callback functions which directly correspond to
6566 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
6567 is needed for applications which have to configure certificates on a
6568 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
6570 For the RSA certificate situation is makes no difference, but
6571 for the DSA certificate situation this fixes the "no shared cipher"
6572 problem where the OpenSSL cipher selection procedure failed because the
6573 temporary keys were not overtaken from the context and the API provided
6574 no way to reconfigure them.
6575 The new functions now let applications reconfigure the stuff and they
6576 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
6577 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
6578 non-public-API function ssl_cert_instantiate() is used as a helper
6579 function and also to reduce code redundancy inside ssl_rsa.c.
6580 [Ralf S. Engelschall]
6582 *) Move s_server -dcert and -dkey options out of the undocumented feature
6583 area because they are useful for the DSA situation and should be
6584 recognized by the users.
6585 [Ralf S. Engelschall]
6587 *) Fix the cipher decision scheme for export ciphers: the export bits are
6588 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
6589 SSL_EXP_MASK. So, the original variable has to be used instead of the
6590 already masked variable.
6591 [Richard Levitte <levitte@stacken.kth.se>]
6593 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
6594 [Richard Levitte <levitte@stacken.kth.se>]
6596 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
6597 from `int' to `unsigned int' because it's a length and initialized by
6598 EVP_DigestFinal() which expects an `unsigned int *'.
6599 [Richard Levitte <levitte@stacken.kth.se>]
6601 *) Don't hard-code path to Perl interpreter on shebang line of Configure
6602 script. Instead use the usual Shell->Perl transition trick.
6603 [Ralf S. Engelschall]
6605 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
6606 (in addition to RSA certificates) to match the behaviour of `openssl dsa
6607 -noout -modulus' as it's already the case for `openssl rsa -noout
6608 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
6609 currently the public key is printed (a decision which was already done by
6610 `openssl dsa -modulus' in the past) which serves a similar purpose.
6611 Additionally the NO_RSA no longer completely removes the whole -modulus
6612 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
6614 [Ralf S. Engelschall]
6616 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
6617 BIO. See the source (crypto/evp/bio_ok.c) for more info.
6618 [Arne Ansper <arne@ats.cyber.ee>]
6620 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
6621 to be added. Now both 'req' and 'ca' can use new objects defined in the
6625 *) Add cool BIO that does syslog (or event log on NT).
6626 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
6628 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
6629 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
6630 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
6631 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
6634 *) Add preliminary config info for new extension code.
6637 *) Make RSA_NO_PADDING really use no padding.
6638 [Ulf Moeller <ulf@fitug.de>]
6640 *) Generate errors when private/public key check is done.
6643 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
6644 for some CRL extensions and new objects added.
6647 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
6648 key usage extension and fuller support for authority key id.
6651 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
6652 padding method for RSA, which is recommended for new applications in PKCS
6653 #1 v2.0 (RFC 2437, October 1998).
6654 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
6655 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
6656 against Bleichbacher's attack on RSA.
6657 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
6660 *) Updates to the new SSL compression code
6661 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
6663 *) Fix so that the version number in the master secret, when passed
6664 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
6665 (because the server will not accept higher), that the version number
6666 is 0x03,0x01, not 0x03,0x00
6667 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
6669 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
6670 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
6671 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
6674 *) Support for RAW extensions where an arbitrary extension can be
6675 created by including its DER encoding. See apps/openssl.cnf for
6679 *) Make sure latest Perl versions don't interpret some generated C array
6680 code as Perl array code in the crypto/err/err_genc.pl script.
6681 [Lars Weber <3weber@informatik.uni-hamburg.de>]
6683 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
6684 not many people have the assembler. Various Win32 compilation fixes and
6685 update to the INSTALL.W32 file with (hopefully) more accurate Win32
6689 *) Modify configure script 'Configure' to automatically create crypto/date.h
6690 file under Win32 and also build pem.h from pem.org. New script
6691 util/mkfiles.pl to create the MINFO file on environments that can't do a
6692 'make files': perl util/mkfiles.pl >MINFO should work.
6695 *) Major rework of DES function declarations, in the pursuit of correctness
6696 and purity. As a result, many evil casts evaporated, and some weirdness,
6697 too. You may find this causes warnings in your code. Zapping your evil
6698 casts will probably fix them. Mostly.
6701 *) Fix for a typo in asn1.h. Bug fix to object creation script
6702 obj_dat.pl. It considered a zero in an object definition to mean
6703 "end of object": none of the objects in objects.h have any zeros
6704 so it wasn't spotted.
6705 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
6707 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
6708 Masking (CBCM). In the absence of test vectors, the best I have been able
6709 to do is check that the decrypt undoes the encrypt, so far. Send me test
6710 vectors if you have them.
6713 *) Correct calculation of key length for export ciphers (too much space was
6714 allocated for null ciphers). This has not been tested!
6717 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
6718 message is now correct (it understands "crypto" and "ssl" on its
6719 command line). There is also now an "update" option. This will update
6720 the util/ssleay.num and util/libeay.num files with any new functions.
6722 perl util/mkdef.pl crypto ssl update
6723 it will update them.
6726 *) Overhauled the Perl interface (perl/*):
6727 - ported BN stuff to OpenSSL's different BN library
6728 - made the perl/ source tree CVS-aware
6729 - renamed the package from SSLeay to OpenSSL (the files still contain
6730 their history because I've copied them in the repository)
6731 - removed obsolete files (the test scripts will be replaced
6732 by better Test::Harness variants in the future)
6733 [Ralf S. Engelschall]
6735 *) First cut for a very conservative source tree cleanup:
6736 1. merge various obsolete readme texts into doc/ssleay.txt
6737 where we collect the old documents and readme texts.
6738 2. remove the first part of files where I'm already sure that we no
6739 longer need them because of three reasons: either they are just temporary
6740 files which were left by Eric or they are preserved original files where
6741 I've verified that the diff is also available in the CVS via "cvs diff
6742 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
6743 the crypto/md/ stuff).
6744 [Ralf S. Engelschall]
6746 *) More extension code. Incomplete support for subject and issuer alt
6747 name, issuer and authority key id. Change the i2v function parameters
6748 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
6749 what that's for :-) Fix to ASN1 macro which messed up
6750 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
6753 *) Preliminary support for ENUMERATED type. This is largely copied from the
6757 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
6758 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
6760 *) Make sure `make rehash' target really finds the `openssl' program.
6761 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
6763 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
6764 like to hear about it if this slows down other processors.
6767 *) Add CygWin32 platform information to Configure script.
6768 [Alan Batie <batie@aahz.jf.intel.com>]
6770 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
6771 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
6773 *) New program nseq to manipulate netscape certificate sequences
6776 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
6780 *) Fixes to BN code. Previously the default was to define BN_RECURSION
6781 but the BN code had some problems that would cause failures when
6782 doing certificate verification and some other functions.
6783 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
6785 *) Add ASN1 and PEM code to support netscape certificate sequences.
6788 *) Add ASN1 and PEM code to support netscape certificate sequences.
6791 *) Add several PKIX and private extended key usage OIDs.
6794 *) Modify the 'ca' program to handle the new extension code. Modify
6795 openssl.cnf for new extension format, add comments.
6798 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
6799 and add a sample to openssl.cnf so req -x509 now adds appropriate
6803 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
6804 error code, add initial support to X509_print() and x509 application.
6807 *) Takes a deep breath and start addding X509 V3 extension support code. Add
6808 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
6809 stuff is currently isolated and isn't even compiled yet.
6812 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
6813 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
6814 Removed the versions check from X509 routines when loading extensions:
6815 this allows certain broken certificates that don't set the version
6816 properly to be processed.
6819 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
6820 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
6821 can still be regenerated with "make depend".
6824 *) Spelling mistake in C version of CAST-128.
6825 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
6827 *) Changes to the error generation code. The perl script err-code.pl
6828 now reads in the old error codes and retains the old numbers, only
6829 adding new ones if necessary. It also only changes the .err files if new
6830 codes are added. The makefiles have been modified to only insert errors
6831 when needed (to avoid needlessly modifying header files). This is done
6832 by only inserting errors if the .err file is newer than the auto generated
6833 C file. To rebuild all the error codes from scratch (the old behaviour)
6834 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
6835 or delete all the .err files.
6838 *) CAST-128 was incorrectly implemented for short keys. The C version has
6839 been fixed, but is untested. The assembler versions are also fixed, but
6840 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
6841 to regenerate it if needed.
6842 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
6843 Hagino <itojun@kame.net>]
6845 *) File was opened incorrectly in randfile.c.
6846 [Ulf Möller <ulf@fitug.de>]
6848 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
6849 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
6850 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
6851 al: it's just almost always a UTCTime. Note this patch adds new error
6852 codes so do a "make errors" if there are problems.
6855 *) Correct Linux 1 recognition in config.
6856 [Ulf Möller <ulf@fitug.de>]
6858 *) Remove pointless MD5 hash when using DSA keys in ca.
6859 [Anonymous <nobody@replay.com>]
6861 *) Generate an error if given an empty string as a cert directory. Also
6862 generate an error if handed NULL (previously returned 0 to indicate an
6863 error, but didn't set one).
6864 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
6866 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
6869 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
6870 parameters. This was causing a warning which killed off the Win32 compile.
6873 *) Remove C++ style comments from crypto/bn/bn_local.h.
6874 [Neil Costigan <neil.costigan@celocom.com>]
6876 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
6877 based on a text string, looking up short and long names and finally
6878 "dot" format. The "dot" format stuff didn't work. Added new function
6879 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
6880 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
6881 OID is not part of the table.
6884 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
6885 X509_LOOKUP_by_alias().
6888 *) Sort openssl functions by name.
6891 *) Get the gendsa program working (hopefully) and add it to app list. Remove
6892 encryption from sample DSA keys (in case anyone is interested the password
6896 *) Make _all_ *_free functions accept a NULL pointer.
6897 [Frans Heymans <fheymans@isaserver.be>]
6899 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
6901 [Anonymous <nobody@replay.com>]
6903 *) s_server should send the CAfile as acceptable CAs, not its own cert.
6904 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
6906 *) Don't blow it for numeric -newkey arguments to apps/req.
6907 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
6909 *) Temp key "for export" tests were wrong in s3_srvr.c.
6910 [Anonymous <nobody@replay.com>]
6912 *) Add prototype for temp key callback functions
6913 SSL_CTX_set_tmp_{rsa,dh}_callback().
6916 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
6917 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
6920 *) X509_name_add_entry() freed the wrong thing after an error.
6921 [Arne Ansper <arne@ats.cyber.ee>]
6923 *) rsa_eay.c would attempt to free a NULL context.
6924 [Arne Ansper <arne@ats.cyber.ee>]
6926 *) BIO_s_socket() had a broken should_retry() on Windoze.
6927 [Arne Ansper <arne@ats.cyber.ee>]
6929 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
6930 [Arne Ansper <arne@ats.cyber.ee>]
6932 *) Make sure the already existing X509_STORE->depth variable is initialized
6933 in X509_STORE_new(), but document the fact that this variable is still
6934 unused in the certificate verification process.
6935 [Ralf S. Engelschall]
6937 *) Fix the various library and apps files to free up pkeys obtained from
6938 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
6941 *) Fix reference counting in X509_PUBKEY_get(). This makes
6942 demos/maurice/example2.c work, amongst others, probably.
6943 [Steve Henson and Ben Laurie]
6945 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
6946 `openssl' and second, the shortcut symlinks for the `openssl <command>'
6947 are no longer created. This way we have a single and consistent command
6948 line interface `openssl <command>', similar to `cvs <command>'.
6949 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
6951 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
6952 BIT STRING wrapper always have zero unused bits.
6955 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
6958 *) Make the top-level INSTALL documentation easier to understand.
6961 *) Makefiles updated to exit if an error occurs in a sub-directory
6962 make (including if user presses ^C) [Paul Sutton]
6964 *) Make Montgomery context stuff explicit in RSA data structure.
6967 *) Fix build order of pem and err to allow for generated pem.h.
6970 *) Fix renumbering bug in X509_NAME_delete_entry().
6973 *) Enhanced the err-ins.pl script so it makes the error library number
6974 global and can add a library name. This is needed for external ASN1 and
6975 other error libraries.
6978 *) Fixed sk_insert which never worked properly.
6981 *) Fix ASN1 macros so they can handle indefinite length construted
6982 EXPLICIT tags. Some non standard certificates use these: they can now
6986 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
6987 into a single doc/ssleay.txt bundle. This way the information is still
6988 preserved but no longer messes up this directory. Now it's new room for
6989 the new set of documenation files.
6990 [Ralf S. Engelschall]
6992 *) SETs were incorrectly DER encoded. This was a major pain, because they
6993 shared code with SEQUENCEs, which aren't coded the same. This means that
6994 almost everything to do with SETs or SEQUENCEs has either changed name or
6995 number of arguments.
6996 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
6998 *) Fix test data to work with the above.
7001 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
7002 was already fixed by Eric for 0.9.1 it seems.
7003 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
7005 *) Autodetect FreeBSD3.
7008 *) Fix various bugs in Configure. This affects the following platforms:
7012 unixware-2.0-pentium
7016 *) Eliminate generated files from CVS. Reorder tests to regenerate files
7017 before they are needed.
7020 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
7024 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
7026 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
7027 changed SSLeay to OpenSSL in version strings.
7028 [Ralf S. Engelschall]
7030 *) Some fixups to the top-level documents.
7033 *) Fixed the nasty bug where rsaref.h was not found under compile-time
7034 because the symlink to include/ was missing.
7035 [Ralf S. Engelschall]
7037 *) Incorporated the popular no-RSA/DSA-only patches
7038 which allow to compile a RSA-free SSLeay.
7039 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
7041 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
7042 when "ssleay" is still not found.
7043 [Ralf S. Engelschall]
7045 *) Added more platforms to Configure: Cray T3E, HPUX 11,
7046 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
7048 *) Updated the README file.
7049 [Ralf S. Engelschall]
7051 *) Added various .cvsignore files in the CVS repository subdirs
7052 to make a "cvs update" really silent.
7053 [Ralf S. Engelschall]
7055 *) Recompiled the error-definition header files and added
7056 missing symbols to the Win32 linker tables.
7057 [Ralf S. Engelschall]
7059 *) Cleaned up the top-level documents;
7060 o new files: CHANGES and LICENSE
7061 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
7062 o merged COPYRIGHT into LICENSE
7063 o removed obsolete TODO file
7064 o renamed MICROSOFT to INSTALL.W32
7065 [Ralf S. Engelschall]
7067 *) Removed dummy files from the 0.9.1b source tree:
7068 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
7069 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
7070 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
7071 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
7072 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
7073 [Ralf S. Engelschall]
7075 *) Added various platform portability fixes.
7078 *) The Genesis of the OpenSSL rpject:
7079 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
7080 Young and Tim J. Hudson created while they were working for C2Net until
7082 [The OpenSSL Project]
7085 Changes between 0.9.0b and 0.9.1b [not released]
7087 *) Updated a few CA certificates under certs/
7090 *) Changed some BIGNUM api stuff.
7093 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
7094 DGUX x86, Linux Alpha, etc.
7097 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
7098 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
7102 *) Add -strparse option to asn1pars program which parses nested
7104 [Dr Stephen Henson <shenson@bigfoot.com>]
7106 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
7109 *) DSA fix for "ca" program.
7112 *) Added "-genkey" option to "dsaparam" program.
7115 *) Added RIPE MD160 (rmd160) message digest.
7118 *) Added -a (all) option to "ssleay version" command.
7121 *) Added PLATFORM define which is the id given to Configure.
7124 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
7127 *) Extended the ASN.1 parser routines.
7130 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
7133 *) Added a BN_CTX to the BN library.
7136 *) Fixed the weak key values in DES library
7139 *) Changed API in EVP library for cipher aliases.
7142 *) Added support for RC2/64bit cipher.
7145 *) Converted the lhash library to the crypto/mem.c functions.
7148 *) Added more recognized ASN.1 object ids.
7151 *) Added more RSA padding checks for SSL/TLS.
7154 *) Added BIO proxy/filter functionality.
7157 *) Added extra_certs to SSL_CTX which can be used
7158 send extra CA certificates to the client in the CA cert chain sending
7159 process. It can be configured with SSL_CTX_add_extra_chain_cert().
7162 *) Now Fortezza is denied in the authentication phase because
7163 this is key exchange mechanism is not supported by SSLeay at all.
7166 *) Additional PKCS1 checks.
7169 *) Support the string "TLSv1" for all TLS v1 ciphers.
7172 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
7173 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
7176 *) Fixed a few memory leaks.
7179 *) Fixed various code and comment typos.
7182 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
7183 bytes sent in the client random.
7184 [Edward Bishop <ebishop@spyglass.com>]
projects / openssl.git / blob