5 Changes between 0.9.3a and 0.9.4
7 *) Memory leak checking had some problems. The interface is as follows:
9 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
10 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
11 "off" is now the default.
12 The library internally uses
13 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
14 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
15 to disable memory-checking temporarily.
17 Some inconsistent states that previously were possible (and were
18 even the default) are now avoided.
21 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
22 which largely parallels "options", but is for changing API behaviour,
23 whereas "options" are about protocol behaviour.
24 Initial "mode" flags (still experimental) are:
26 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
27 a single record has been written.
28 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
29 retries use the same buffer location.
30 (But all of the contents must be
34 *) Bugfix: SSL_set_mode ignored its parameter, only SSL_CTX_set_mode
37 *) Fix problems with no-hmac etc.
38 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
40 *) New functions RSA_get_default_method(), RSA_set_method() and
41 RSA_get_method(). These allows replacement of RSA_METHODs without having
42 to mess around with the internals of an RSA structure.
45 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
46 Also really enable memory leak checks in openssl.c and in some
48 [Chad C. Mulligan, Bodo Moeller]
50 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
51 up the length of negative integers. This has now been simplified to just
52 store the length when it is first determined and use it later, rather
53 than trying to keep track of where data is copied and updating it to
55 [Steve Henson, reported by Brien Wheeler
56 <bwheeler@authentica-security.com>]
58 *) Add a new function PKCS7_signatureVerify. This allows the verification
59 of a PKCS#7 signature but with the signing certificate passed to the
60 function itself. This contrasts with PKCS7_dataVerify which assumes the
61 certificate is present in the PKCS#7 structure. This isn't always the
62 case: certificates can be omitted from a PKCS#7 structure and be
63 distributed by "out of band" means (such as a certificate database).
66 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
67 function prototypes in pem.h, also change util/mkdef.pl to add the
68 necessary function names.
71 *) mk1mf.pl (used by Windows builds) did not properly read the
72 options set by Configure in the top level Makefile, and Configure
73 was not even able to write more than one option correctly.
74 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
77 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
78 file to be loaded from a BIO or FILE pointer. The BIO version will
79 for example allow memory BIOs to contain config info.
82 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
83 Whoever hopes to achieve shared-library compatibility across versions
84 must use this, not the compile-time macro.
85 (Exercise 0.9.4: Which is the minimum library version required by
87 Note: All this applies only to multi-threaded programs, others don't
91 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
92 through a BIO pair triggered the default case, i.e.
93 SSLerr(...,SSL_R_UNKNOWN_STATE).
96 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
97 can use the SSL library even if none of the specific BIOs is
101 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
102 for the encoded length.
103 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
105 *) Add initial documentation of the X509V3 functions.
108 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
109 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
110 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
111 secure PKCS#8 private key format with a high iteration count.
114 *) Fix determination of Perl interpreter: A perl or perl5
115 _directory_ in $PATH was also accepted as the interpreter.
116 [Ralf S. Engelschall]
118 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
119 wrong with it but it was very old and did things like calling
120 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
124 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
125 to use the new extension code.
128 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
129 with macros. This should make it easier to change their form, add extra
130 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
134 *) Add to configuration table a new entry that can specify an alternative
135 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
136 according to Mark Crispin <MRC@Panda.COM>.
140 *) DES CBC did not update the IV. Weird.
143 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
144 Changing the behaviour of the former might break existing programs --
145 where IV updating is needed, des_ncbc_encrypt can be used.
148 *) When bntest is run from "make test" it drives bc to check its
149 calculations, as well as internally checking them. If an internal check
150 fails, it needs to cause bc to give a non-zero result or make test carries
151 on without noticing the failure. Fixed.
154 *) DES library cleanups.
157 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
158 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
159 ciphers. NOTE: although the key derivation function has been verified
160 against some published test vectors it has not been extensively tested
161 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
165 *) Instead of "mkdir -p", which is not fully portable, use new
166 Perl script "util/mkdir-p.pl".
169 *) Rewrite the way password based encryption (PBE) is handled. It used to
170 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
171 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
172 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
173 the 'parameter' field of the AlgorithmIdentifier is passed to the
174 underlying key generation function so it must do its own ASN1 parsing.
175 This has also changed the EVP_PBE_CipherInit() function which now has a
176 'parameter' argument instead of literal salt and iteration count values
177 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
180 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
181 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
182 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
183 KEY" because this clashed with PKCS#8 unencrypted string. Since this
184 value was just used as a "magic string" and not used directly its
185 value doesn't matter.
188 *) Introduce some semblance of const correctness to BN. Shame C doesn't
192 *) "linux-sparc64" configuration (ultrapenguin).
193 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
194 "linux-sparc" configuration.
195 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
197 *) config now generates no-xxx options for missing ciphers.
200 *) Support the EBCDIC character set (work in progress).
201 File ebcdic.c not yet included because it has a different license.
202 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
204 *) Support BS2000/OSD-POSIX.
205 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
207 *) Make callbacks for key generation use void * instead of char *.
210 *) Make S/MIME samples compile (not yet tested).
213 *) Additional typesafe stacks.
216 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
220 Changes between 0.9.3 and 0.9.3a [29 May 1999]
222 *) New configuration variant "sco5-gcc".
224 *) Updated some demos.
225 [Sean O Riordain, Wade Scholine]
227 *) Add missing BIO_free at exit of pkcs12 application.
230 *) Fix memory leak in conf.c.
233 *) Updates for Win32 to assembler version of MD5.
236 *) Set #! path to perl in apps/der_chop to where we found it
237 instead of using a fixed path.
240 *) SHA library changes for irix64-mips4-cc.
243 *) Improvements for VMS support.
247 Changes between 0.9.2b and 0.9.3 [24 May 1999]
249 *) Bignum library bug fix. IRIX 6 passes "make test" now!
250 This also avoids the problems with SC4.2 and unpatched SC5.
251 [Andy Polyakov <appro@fy.chalmers.se>]
253 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
254 These are required because of the typesafe stack would otherwise break
255 existing code. If old code used a structure member which used to be STACK
256 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
257 sk_num or sk_value it would produce an error because the num, data members
258 are not present in STACK_OF. Now it just produces a warning. sk_set
259 replaces the old method of assigning a value to sk_value
260 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
261 that does this will no longer work (and should use sk_set instead) but
262 this could be regarded as a "questionable" behaviour anyway.
265 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
266 correctly handle encrypted S/MIME data.
269 *) Change type of various DES function arguments from des_cblock
270 (which means, in function argument declarations, pointer to char)
271 to des_cblock * (meaning pointer to array with 8 char elements),
272 which allows the compiler to do more typechecking; it was like
273 that back in SSLeay, but with lots of ugly casts.
275 Introduce new type const_des_cblock.
278 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
279 problems: find RecipientInfo structure that matches recipient certificate
280 and initialise the ASN1 structures properly based on passed cipher.
283 *) Belatedly make the BN tests actually check the results.
286 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
287 to and from BNs: it was completely broken. New compilation option
288 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
289 key elements as negative integers.
292 *) Reorganize and speed up MD5.
293 [Andy Polyakov <appro@fy.chalmers.se>]
296 [Richard Levitte <richard@levitte.org>]
298 *) New option -out to asn1parse to allow the parsed structure to be
299 output to a file. This is most useful when combined with the -strparse
300 option to examine the output of things like OCTET STRINGS.
303 *) Make SSL library a little more fool-proof by not requiring any longer
304 that SSL_set_{accept,connect}_state be called before
305 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
306 in many applications because usually everything *appeared* to work as
307 intended anyway -- now it really works as intended).
310 *) Move openssl.cnf out of lib/.
313 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
314 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
315 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
316 [Ralf S. Engelschall]
318 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
319 handle PKCS#7 enveloped data properly.
320 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
322 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
323 copying pointers. The cert_st handling is changed by this in
324 various ways (and thus what used to be known as ctx->default_cert
325 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
326 any longer when s->cert does not give us what we need).
327 ssl_cert_instantiate becomes obsolete by this change.
328 As soon as we've got the new code right (possibly it already is?),
329 we have solved a couple of bugs of the earlier code where s->cert
330 was used as if it could not have been shared with other SSL structures.
332 Note that using the SSL API in certain dirty ways now will result
333 in different behaviour than observed with earlier library versions:
334 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
335 does not influence s as it used to.
337 In order to clean up things more thoroughly, inside SSL_SESSION
338 we don't use CERT any longer, but a new structure SESS_CERT
339 that holds per-session data (if available); currently, this is
340 the peer's certificate chain and, for clients, the server's certificate
341 and temporary key. CERT holds only those values that can have
342 meaningful defaults in an SSL_CTX.
345 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
346 from the internal representation. Various PKCS#7 fixes: remove some
347 evil casts and set the enc_dig_alg field properly based on the signing
351 *) Allow PKCS#12 password to be set from the command line or the
352 environment. Let 'ca' get its config file name from the environment
353 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
357 *) Allow certificate policies extension to use an IA5STRING for the
358 organization field. This is contrary to the PKIX definition but
359 VeriSign uses it and IE5 only recognises this form. Document 'x509'
363 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
364 without disallowing inline assembler and the like for non-pedantic builds.
367 *) Support Borland C++ builder.
368 [Janez Jere <jj@void.si>, modified by Ulf Möller]
373 *) SHA-1 cleanups and performance enhancements.
374 [Andy Polyakov <appro@fy.chalmers.se>]
376 *) Sparc v8plus assembler for the bignum library.
377 [Andy Polyakov <appro@fy.chalmers.se>]
379 *) Accept any -xxx and +xxx compiler options in Configure.
382 *) Update HPUX configuration.
385 *) Add missing sk_<type>_unshift() function to safestack.h
386 [Ralf S. Engelschall]
388 *) New function SSL_CTX_use_certificate_chain_file that sets the
389 "extra_cert"s in addition to the certificate. (This makes sense
390 only for "PEM" format files, as chains as a whole are not
394 *) Support verify_depth from the SSL API.
395 x509_vfy.c had what can be considered an off-by-one-error:
396 Its depth (which was not part of the external interface)
397 was actually counting the number of certificates in a chain;
398 now it really counts the depth.
401 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
402 instead of X509err, which often resulted in confusing error
403 messages since the error codes are not globally unique
404 (e.g. an alleged error in ssl3_accept when a certificate
405 didn't match the private key).
407 *) New function SSL_CTX_set_session_id_context that allows to set a default
408 value (so that you don't need SSL_set_session_id_context for each
409 connection using the SSL_CTX).
412 *) OAEP decoding bug fix.
415 *) Support INSTALL_PREFIX for package builders, as proposed by
419 *) New Configure options "threads" and "no-threads". For systems
420 where the proper compiler options are known (currently Solaris
421 and Linux), "threads" is the default.
424 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
427 *) Install various scripts to $(OPENSSLDIR)/misc, not to
428 $(INSTALLTOP)/bin -- they shouldn't clutter directories
429 such as /usr/local/bin.
432 *) "make linux-shared" to build shared libraries.
433 [Niels Poppe <niels@netbox.org>]
435 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
438 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
439 extension adding in x509 utility.
442 *) Remove NOPROTO sections and error code comments.
445 *) Partial rewrite of the DEF file generator to now parse the ANSI
449 *) New Configure options --prefix=DIR and --openssldir=DIR.
452 *) Complete rewrite of the error code script(s). It is all now handled
453 by one script at the top level which handles error code gathering,
454 header rewriting and C source file generation. It should be much better
455 than the old method: it now uses a modified version of Ulf's parser to
456 read the ANSI prototypes in all header files (thus the old K&R definitions
457 aren't needed for error creation any more) and do a better job of
458 translating function codes into names. The old 'ASN1 error code imbedded
459 in a comment' is no longer necessary and it doesn't use .err files which
460 have now been deleted. Also the error code call doesn't have to appear all
461 on one line (which resulted in some large lines...).
464 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
467 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
468 0 (which usually indicates a closed connection), but continue reading.
471 *) Fix some race conditions.
474 *) Add support for CRL distribution points extension. Add Certificate
475 Policies and CRL distribution points documentation.
478 *) Move the autogenerated header file parts to crypto/opensslconf.h.
481 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
482 8 of keying material. Merlin has also confirmed interop with this fix
483 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
484 [Merlin Hughes <merlin@baltimore.ie>]
486 *) Fix lots of warnings.
487 [Richard Levitte <levitte@stacken.kth.se>]
489 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
490 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
491 [Richard Levitte <levitte@stacken.kth.se>]
493 *) Fix problems with sizeof(long) == 8.
494 [Andy Polyakov <appro@fy.chalmers.se>]
496 *) Change functions to ANSI C.
499 *) Fix typos in error codes.
500 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
502 *) Remove defunct assembler files from Configure.
505 *) SPARC v8 assembler BIGNUM implementation.
506 [Andy Polyakov <appro@fy.chalmers.se>]
508 *) Support for Certificate Policies extension: both print and set.
509 Various additions to support the r2i method this uses.
512 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
513 return a const string when you are expecting an allocated buffer.
516 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
517 types DirectoryString and DisplayText.
520 *) Add code to allow r2i extensions to access the configuration database,
521 add an LHASH database driver and add several ctx helper functions.
524 *) Fix an evil bug in bn_expand2() which caused various BN functions to
525 fail when they extended the size of a BIGNUM.
528 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
529 support typesafe stack.
532 *) Fix typo in SSL_[gs]et_options().
533 [Nils Frostberg <nils@medcom.se>]
535 *) Delete various functions and files that belonged to the (now obsolete)
536 old X509V3 handling code.
539 *) New Configure option "rsaref".
542 *) Don't auto-generate pem.h.
545 *) Introduce type-safe ASN.1 SETs.
548 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
549 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
551 *) Introduce type-safe STACKs. This will almost certainly break lots of code
552 that links with OpenSSL (well at least cause lots of warnings), but fear
553 not: the conversion is trivial, and it eliminates loads of evil casts. A
554 few STACKed things have been converted already. Feel free to convert more.
555 In the fullness of time, I'll do away with the STACK type altogether.
558 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
559 specified in <certfile> by updating the entry in the index.txt file.
560 This way one no longer has to edit the index.txt file manually for
561 revoking a certificate. The -revoke option does the gory details now.
562 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
564 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
565 `-text' option at all and this way the `-noout -text' combination was
566 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
567 [Ralf S. Engelschall]
569 *) Make sure a corresponding plain text error message exists for the
570 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
571 verify callback function determined that a certificate was revoked.
572 [Ralf S. Engelschall]
574 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
575 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
576 all available cipers including rc5, which was forgotten until now.
577 In order to let the testing shell script know which algorithms
578 are available, a new (up to now undocumented) command
579 "openssl list-cipher-commands" is used.
582 *) Bugfix: s_client occasionally would sleep in select() when
583 it should have checked SSL_pending() first.
586 *) New functions DSA_do_sign and DSA_do_verify to provide access to
587 the raw DSA values prior to ASN.1 encoding.
590 *) Tweaks to Configure
591 [Niels Poppe <niels@netbox.org>]
593 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
597 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
600 *) New config option to avoid instructions that are illegal on the 80386.
601 The default code is faster, but requires at least a 486.
604 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
605 SSL2_SERVER_VERSION (not used at all) macros, which are now the
606 same as SSL2_VERSION anyway.
609 *) New "-showcerts" option for s_client.
612 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
613 application. Various cleanups and fixes.
616 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
617 modify error routines to work internally. Add error codes and PBE init
618 to library startup routines.
621 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
622 packing functions to asn1 and evp. Changed function names and error
626 *) PKCS12 integration: and so it begins... First of several patches to
627 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
631 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
632 and display support for Thawte strong extranet extension.
635 *) Add LinuxPPC support.
636 [Jeff Dubrule <igor@pobox.org>]
638 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
639 bn_div_words in alpha.s.
640 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
642 *) Make sure the RSA OAEP test is skipped under -DRSAref because
643 OAEP isn't supported when OpenSSL is built with RSAref.
644 [Ulf Moeller <ulf@fitug.de>]
646 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
647 so they no longer are missing under -DNOPROTO.
648 [Soren S. Jorvang <soren@t.dk>]
651 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
653 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
654 doesn't work when the session is reused. Coming soon!
657 *) Fix a security hole, that allows sessions to be reused in the wrong
658 context thus bypassing client cert protection! All software that uses
659 client certs and session caches in multiple contexts NEEDS PATCHING to
660 allow session reuse! A fuller solution is in the works.
661 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
663 *) Some more source tree cleanups (removed obsolete files
664 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
665 permission on "config" script to be executable) and a fix for the INSTALL
667 [Ulf Moeller <ulf@fitug.de>]
669 *) Remove some legacy and erroneous uses of malloc, free instead of
671 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
673 *) Make rsa_oaep_test return non-zero on error.
674 [Ulf Moeller <ulf@fitug.de>]
676 *) Add support for native Solaris shared libraries. Configure
677 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
678 if someone would make that last step automatic.
679 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
681 *) ctx_size was not built with the right compiler during "make links". Fixed.
684 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
685 except NULL ciphers". This means the default cipher list will no longer
686 enable NULL ciphers. They need to be specifically enabled e.g. with
687 the string "DEFAULT:eNULL".
690 *) Fix to RSA private encryption routines: if p < q then it would
691 occasionally produce an invalid result. This will only happen with
692 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
695 *) Be less restrictive and allow also `perl util/perlpath.pl
696 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
697 because this way one can also use an interpreter named `perl5' (which is
698 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
699 installed as `perl').
700 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
702 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
703 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
705 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
706 advapi32.lib to Win32 build and change the pem test comparision
707 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
708 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
709 and crypto/des/ede_cbcm_enc.c.
712 *) DES quad checksum was broken on big-endian architectures. Fixed.
715 *) Comment out two functions in bio.h that aren't implemented. Fix up the
716 Win32 test batch file so it (might) work again. The Win32 test batch file
717 is horrible: I feel ill....
720 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
721 in e_os.h. Audit of header files to check ANSI and non ANSI
722 sections: 10 functions were absent from non ANSI section and not exported
723 from Windows DLLs. Fixed up libeay.num for new functions.
726 *) Make `openssl version' output lines consistent.
727 [Ralf S. Engelschall]
729 *) Fix Win32 symbol export lists for BIO functions: Added
730 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
731 to ms/libeay{16,32}.def.
732 [Ralf S. Engelschall]
734 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
735 fine under Unix and passes some trivial tests I've now added. But the
736 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
737 added to make sure no one expects that this stuff really works in the
738 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
739 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
741 [Ralf S. Engelschall]
743 *) Fix the generation of two part addresses in perl.
744 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
746 *) Add config entry for Linux on MIPS.
747 [John Tobey <jtobey@channel1.com>]
749 *) Make links whenever Configure is run, unless we are on Windoze.
752 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
753 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
757 *) Add a useful kludge to allow package maintainers to specify compiler and
758 other platforms details on the command line without having to patch the
759 Configure script everytime: One now can use ``perl Configure
760 <id>:<details>'', i.e. platform ids are allowed to have details appended
761 to them (seperated by colons). This is treated as there would be a static
762 pre-configured entry in Configure's %table under key <id> with value
763 <details> and ``perl Configure <id>'' is called. So, when you want to
764 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
765 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
766 now, which overrides the FreeBSD-elf entry on-the-fly.
767 [Ralf S. Engelschall]
769 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
772 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
773 on the `perl Configure ...' command line. This way one can compile
774 OpenSSL libraries with Position Independent Code (PIC) which is needed
775 for linking it into DSOs.
776 [Ralf S. Engelschall]
778 *) Remarkably, export ciphers were totally broken and no-one had noticed!
782 *) Cleaned up the LICENSE document: The official contact for any license
783 questions now is the OpenSSL core team under openssl-core@openssl.org.
784 And add a paragraph about the dual-license situation to make sure people
785 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
786 to the OpenSSL toolkit.
787 [Ralf S. Engelschall]
789 *) General source tree makefile cleanups: Made `making xxx in yyy...'
790 display consistent in the source tree and replaced `/bin/rm' by `rm'.
791 Additonally cleaned up the `make links' target: Remove unnecessary
792 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
793 to speed processing and no longer clutter the display with confusing
794 stuff. Instead only the actually done links are displayed.
795 [Ralf S. Engelschall]
797 *) Permit null encryption ciphersuites, used for authentication only. It used
798 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
799 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
803 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
804 signed attributes when verifying signatures (this would break them),
805 the detached data encoding was wrong and public keys obtained using
806 X509_get_pubkey() weren't freed.
809 *) Add text documentation for the BUFFER functions. Also added a work around
810 to a Win95 console bug. This was triggered by the password read stuff: the
811 last character typed gets carried over to the next fread(). If you were
812 generating a new cert request using 'req' for example then the last
813 character of the passphrase would be CR which would then enter the first
817 *) Added the new `Includes OpenSSL Cryptography Software' button as
818 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
819 button and can be used by applications based on OpenSSL to show the
820 relationship to the OpenSSL project.
821 [Ralf S. Engelschall]
823 *) Remove confusing variables in function signatures in files
824 ssl/ssl_lib.c and ssl/ssl.h.
825 [Lennart Bong <lob@kulthea.stacken.kth.se>]
827 *) Don't install bss_file.c under PREFIX/include/
828 [Lennart Bong <lob@kulthea.stacken.kth.se>]
830 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
831 functions that return function pointers and has support for NT specific
832 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
833 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
834 unsigned to signed types: this was killing the Win32 compile.
837 *) Add new certificate file to stack functions,
838 SSL_add_dir_cert_subjects_to_stack() and
839 SSL_add_file_cert_subjects_to_stack(). These largely supplant
840 SSL_load_client_CA_file(), and can be used to add multiple certs easily
841 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
842 This means that Apache-SSL and similar packages don't have to mess around
843 to add as many CAs as they want to the preferred list.
846 *) Experiment with doxygen documentation. Currently only partially applied to
848 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
849 openssl.doxy as the configuration file.
852 *) Get rid of remaining C++-style comments which strict C compilers hate.
853 [Ralf S. Engelschall, pointed out by Carlos Amengual]
855 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
856 compiled in by default: it has problems with large keys.
859 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
860 DH private keys and/or callback functions which directly correspond to
861 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
862 is needed for applications which have to configure certificates on a
863 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
865 For the RSA certificate situation is makes no difference, but
866 for the DSA certificate situation this fixes the "no shared cipher"
867 problem where the OpenSSL cipher selection procedure failed because the
868 temporary keys were not overtaken from the context and the API provided
869 no way to reconfigure them.
870 The new functions now let applications reconfigure the stuff and they
871 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
872 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
873 non-public-API function ssl_cert_instantiate() is used as a helper
874 function and also to reduce code redundancy inside ssl_rsa.c.
875 [Ralf S. Engelschall]
877 *) Move s_server -dcert and -dkey options out of the undocumented feature
878 area because they are useful for the DSA situation and should be
879 recognized by the users.
880 [Ralf S. Engelschall]
882 *) Fix the cipher decision scheme for export ciphers: the export bits are
883 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
884 SSL_EXP_MASK. So, the original variable has to be used instead of the
885 already masked variable.
886 [Richard Levitte <levitte@stacken.kth.se>]
888 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
889 [Richard Levitte <levitte@stacken.kth.se>]
891 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
892 from `int' to `unsigned int' because it's a length and initialized by
893 EVP_DigestFinal() which expects an `unsigned int *'.
894 [Richard Levitte <levitte@stacken.kth.se>]
896 *) Don't hard-code path to Perl interpreter on shebang line of Configure
897 script. Instead use the usual Shell->Perl transition trick.
898 [Ralf S. Engelschall]
900 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
901 (in addition to RSA certificates) to match the behaviour of `openssl dsa
902 -noout -modulus' as it's already the case for `openssl rsa -noout
903 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
904 currently the public key is printed (a decision which was already done by
905 `openssl dsa -modulus' in the past) which serves a similar purpose.
906 Additionally the NO_RSA no longer completely removes the whole -modulus
907 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
909 [Ralf S. Engelschall]
911 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
912 BIO. See the source (crypto/evp/bio_ok.c) for more info.
913 [Arne Ansper <arne@ats.cyber.ee>]
915 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
916 to be added. Now both 'req' and 'ca' can use new objects defined in the
920 *) Add cool BIO that does syslog (or event log on NT).
921 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
923 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
924 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
925 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
926 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
929 *) Add preliminary config info for new extension code.
932 *) Make RSA_NO_PADDING really use no padding.
933 [Ulf Moeller <ulf@fitug.de>]
935 *) Generate errors when private/public key check is done.
938 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
939 for some CRL extensions and new objects added.
942 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
943 key usage extension and fuller support for authority key id.
946 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
947 padding method for RSA, which is recommended for new applications in PKCS
948 #1 v2.0 (RFC 2437, October 1998).
949 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
950 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
951 against Bleichbacher's attack on RSA.
952 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
955 *) Updates to the new SSL compression code
956 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
958 *) Fix so that the version number in the master secret, when passed
959 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
960 (because the server will not accept higher), that the version number
961 is 0x03,0x01, not 0x03,0x00
962 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
964 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
965 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
966 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
969 *) Support for RAW extensions where an arbitrary extension can be
970 created by including its DER encoding. See apps/openssl.cnf for
974 *) Make sure latest Perl versions don't interpret some generated C array
975 code as Perl array code in the crypto/err/err_genc.pl script.
976 [Lars Weber <3weber@informatik.uni-hamburg.de>]
978 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
979 not many people have the assembler. Various Win32 compilation fixes and
980 update to the INSTALL.W32 file with (hopefully) more accurate Win32
984 *) Modify configure script 'Configure' to automatically create crypto/date.h
985 file under Win32 and also build pem.h from pem.org. New script
986 util/mkfiles.pl to create the MINFO file on environments that can't do a
987 'make files': perl util/mkfiles.pl >MINFO should work.
990 *) Major rework of DES function declarations, in the pursuit of correctness
991 and purity. As a result, many evil casts evaporated, and some weirdness,
992 too. You may find this causes warnings in your code. Zapping your evil
993 casts will probably fix them. Mostly.
996 *) Fix for a typo in asn1.h. Bug fix to object creation script
997 obj_dat.pl. It considered a zero in an object definition to mean
998 "end of object": none of the objects in objects.h have any zeros
999 so it wasn't spotted.
1000 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
1002 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
1003 Masking (CBCM). In the absence of test vectors, the best I have been able
1004 to do is check that the decrypt undoes the encrypt, so far. Send me test
1005 vectors if you have them.
1008 *) Correct calculation of key length for export ciphers (too much space was
1009 allocated for null ciphers). This has not been tested!
1012 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
1013 message is now correct (it understands "crypto" and "ssl" on its
1014 command line). There is also now an "update" option. This will update
1015 the util/ssleay.num and util/libeay.num files with any new functions.
1017 perl util/mkdef.pl crypto ssl update
1018 it will update them.
1021 *) Overhauled the Perl interface (perl/*):
1022 - ported BN stuff to OpenSSL's different BN library
1023 - made the perl/ source tree CVS-aware
1024 - renamed the package from SSLeay to OpenSSL (the files still contain
1025 their history because I've copied them in the repository)
1026 - removed obsolete files (the test scripts will be replaced
1027 by better Test::Harness variants in the future)
1028 [Ralf S. Engelschall]
1030 *) First cut for a very conservative source tree cleanup:
1031 1. merge various obsolete readme texts into doc/ssleay.txt
1032 where we collect the old documents and readme texts.
1033 2. remove the first part of files where I'm already sure that we no
1034 longer need them because of three reasons: either they are just temporary
1035 files which were left by Eric or they are preserved original files where
1036 I've verified that the diff is also available in the CVS via "cvs diff
1037 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
1038 the crypto/md/ stuff).
1039 [Ralf S. Engelschall]
1041 *) More extension code. Incomplete support for subject and issuer alt
1042 name, issuer and authority key id. Change the i2v function parameters
1043 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
1044 what that's for :-) Fix to ASN1 macro which messed up
1045 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
1048 *) Preliminary support for ENUMERATED type. This is largely copied from the
1052 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
1053 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
1055 *) Make sure `make rehash' target really finds the `openssl' program.
1056 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
1058 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
1059 like to hear about it if this slows down other processors.
1062 *) Add CygWin32 platform information to Configure script.
1063 [Alan Batie <batie@aahz.jf.intel.com>]
1065 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
1066 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
1068 *) New program nseq to manipulate netscape certificate sequences
1071 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
1075 *) Fixes to BN code. Previously the default was to define BN_RECURSION
1076 but the BN code had some problems that would cause failures when
1077 doing certificate verification and some other functions.
1078 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
1080 *) Add ASN1 and PEM code to support netscape certificate sequences.
1083 *) Add ASN1 and PEM code to support netscape certificate sequences.
1086 *) Add several PKIX and private extended key usage OIDs.
1089 *) Modify the 'ca' program to handle the new extension code. Modify
1090 openssl.cnf for new extension format, add comments.
1093 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
1094 and add a sample to openssl.cnf so req -x509 now adds appropriate
1098 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
1099 error code, add initial support to X509_print() and x509 application.
1102 *) Takes a deep breath and start addding X509 V3 extension support code. Add
1103 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
1104 stuff is currently isolated and isn't even compiled yet.
1107 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
1108 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
1109 Removed the versions check from X509 routines when loading extensions:
1110 this allows certain broken certificates that don't set the version
1111 properly to be processed.
1114 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
1115 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
1116 can still be regenerated with "make depend".
1119 *) Spelling mistake in C version of CAST-128.
1120 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
1122 *) Changes to the error generation code. The perl script err-code.pl
1123 now reads in the old error codes and retains the old numbers, only
1124 adding new ones if necessary. It also only changes the .err files if new
1125 codes are added. The makefiles have been modified to only insert errors
1126 when needed (to avoid needlessly modifying header files). This is done
1127 by only inserting errors if the .err file is newer than the auto generated
1128 C file. To rebuild all the error codes from scratch (the old behaviour)
1129 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
1130 or delete all the .err files.
1133 *) CAST-128 was incorrectly implemented for short keys. The C version has
1134 been fixed, but is untested. The assembler versions are also fixed, but
1135 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
1136 to regenerate it if needed.
1137 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
1138 Hagino <itojun@kame.net>]
1140 *) File was opened incorrectly in randfile.c.
1141 [Ulf Möller <ulf@fitug.de>]
1143 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
1144 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
1145 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
1146 al: it's just almost always a UTCTime. Note this patch adds new error
1147 codes so do a "make errors" if there are problems.
1150 *) Correct Linux 1 recognition in config.
1151 [Ulf Möller <ulf@fitug.de>]
1153 *) Remove pointless MD5 hash when using DSA keys in ca.
1154 [Anonymous <nobody@replay.com>]
1156 *) Generate an error if given an empty string as a cert directory. Also
1157 generate an error if handed NULL (previously returned 0 to indicate an
1158 error, but didn't set one).
1159 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
1161 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
1164 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
1165 parameters. This was causing a warning which killed off the Win32 compile.
1168 *) Remove C++ style comments from crypto/bn/bn_local.h.
1169 [Neil Costigan <neil.costigan@celocom.com>]
1171 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
1172 based on a text string, looking up short and long names and finally
1173 "dot" format. The "dot" format stuff didn't work. Added new function
1174 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
1175 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
1176 OID is not part of the table.
1179 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
1180 X509_LOOKUP_by_alias().
1183 *) Sort openssl functions by name.
1186 *) Get the gendsa program working (hopefully) and add it to app list. Remove
1187 encryption from sample DSA keys (in case anyone is interested the password
1191 *) Make _all_ *_free functions accept a NULL pointer.
1192 [Frans Heymans <fheymans@isaserver.be>]
1194 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
1196 [Anonymous <nobody@replay.com>]
1198 *) s_server should send the CAfile as acceptable CAs, not its own cert.
1199 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
1201 *) Don't blow it for numeric -newkey arguments to apps/req.
1202 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
1204 *) Temp key "for export" tests were wrong in s3_srvr.c.
1205 [Anonymous <nobody@replay.com>]
1207 *) Add prototype for temp key callback functions
1208 SSL_CTX_set_tmp_{rsa,dh}_callback().
1211 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
1212 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
1215 *) X509_name_add_entry() freed the wrong thing after an error.
1216 [Arne Ansper <arne@ats.cyber.ee>]
1218 *) rsa_eay.c would attempt to free a NULL context.
1219 [Arne Ansper <arne@ats.cyber.ee>]
1221 *) BIO_s_socket() had a broken should_retry() on Windoze.
1222 [Arne Ansper <arne@ats.cyber.ee>]
1224 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
1225 [Arne Ansper <arne@ats.cyber.ee>]
1227 *) Make sure the already existing X509_STORE->depth variable is initialized
1228 in X509_STORE_new(), but document the fact that this variable is still
1229 unused in the certificate verification process.
1230 [Ralf S. Engelschall]
1232 *) Fix the various library and apps files to free up pkeys obtained from
1233 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
1236 *) Fix reference counting in X509_PUBKEY_get(). This makes
1237 demos/maurice/example2.c work, amongst others, probably.
1238 [Steve Henson and Ben Laurie]
1240 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
1241 `openssl' and second, the shortcut symlinks for the `openssl <command>'
1242 are no longer created. This way we have a single and consistent command
1243 line interface `openssl <command>', similar to `cvs <command>'.
1244 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
1246 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
1247 BIT STRING wrapper always have zero unused bits.
1250 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
1253 *) Make the top-level INSTALL documentation easier to understand.
1256 *) Makefiles updated to exit if an error occurs in a sub-directory
1257 make (including if user presses ^C) [Paul Sutton]
1259 *) Make Montgomery context stuff explicit in RSA data structure.
1262 *) Fix build order of pem and err to allow for generated pem.h.
1265 *) Fix renumbering bug in X509_NAME_delete_entry().
1268 *) Enhanced the err-ins.pl script so it makes the error library number
1269 global and can add a library name. This is needed for external ASN1 and
1270 other error libraries.
1273 *) Fixed sk_insert which never worked properly.
1276 *) Fix ASN1 macros so they can handle indefinite length construted
1277 EXPLICIT tags. Some non standard certificates use these: they can now
1281 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
1282 into a single doc/ssleay.txt bundle. This way the information is still
1283 preserved but no longer messes up this directory. Now it's new room for
1284 the new set of documenation files.
1285 [Ralf S. Engelschall]
1287 *) SETs were incorrectly DER encoded. This was a major pain, because they
1288 shared code with SEQUENCEs, which aren't coded the same. This means that
1289 almost everything to do with SETs or SEQUENCEs has either changed name or
1290 number of arguments.
1291 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
1293 *) Fix test data to work with the above.
1296 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
1297 was already fixed by Eric for 0.9.1 it seems.
1298 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
1300 *) Autodetect FreeBSD3.
1303 *) Fix various bugs in Configure. This affects the following platforms:
1307 unixware-2.0-pentium
1311 *) Eliminate generated files from CVS. Reorder tests to regenerate files
1312 before they are needed.
1315 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
1319 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
1321 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
1322 changed SSLeay to OpenSSL in version strings.
1323 [Ralf S. Engelschall]
1325 *) Some fixups to the top-level documents.
1328 *) Fixed the nasty bug where rsaref.h was not found under compile-time
1329 because the symlink to include/ was missing.
1330 [Ralf S. Engelschall]
1332 *) Incorporated the popular no-RSA/DSA-only patches
1333 which allow to compile a RSA-free SSLeay.
1334 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
1336 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
1337 when "ssleay" is still not found.
1338 [Ralf S. Engelschall]
1340 *) Added more platforms to Configure: Cray T3E, HPUX 11,
1341 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
1343 *) Updated the README file.
1344 [Ralf S. Engelschall]
1346 *) Added various .cvsignore files in the CVS repository subdirs
1347 to make a "cvs update" really silent.
1348 [Ralf S. Engelschall]
1350 *) Recompiled the error-definition header files and added
1351 missing symbols to the Win32 linker tables.
1352 [Ralf S. Engelschall]
1354 *) Cleaned up the top-level documents;
1355 o new files: CHANGES and LICENSE
1356 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
1357 o merged COPYRIGHT into LICENSE
1358 o removed obsolete TODO file
1359 o renamed MICROSOFT to INSTALL.W32
1360 [Ralf S. Engelschall]
1362 *) Removed dummy files from the 0.9.1b source tree:
1363 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
1364 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
1365 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
1366 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
1367 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
1368 [Ralf S. Engelschall]
1370 *) Added various platform portability fixes.
1373 *) The Genesis of the OpenSSL rpject:
1374 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
1375 Young and Tim J. Hudson created while they were working for C2Net until
1377 [The OpenSSL Project]
1380 Changes between 0.9.0b and 0.9.1b [not released]
1382 *) Updated a few CA certificates under certs/
1385 *) Changed some BIGNUM api stuff.
1388 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
1389 DGUX x86, Linux Alpha, etc.
1392 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
1393 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
1397 *) Add -strparse option to asn1pars program which parses nested
1399 [Dr Stephen Henson <shenson@bigfoot.com>]
1401 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
1404 *) DSA fix for "ca" program.
1407 *) Added "-genkey" option to "dsaparam" program.
1410 *) Added RIPE MD160 (rmd160) message digest.
1413 *) Added -a (all) option to "ssleay version" command.
1416 *) Added PLATFORM define which is the id given to Configure.
1419 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
1422 *) Extended the ASN.1 parser routines.
1425 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
1428 *) Added a BN_CTX to the BN library.
1431 *) Fixed the weak key values in DES library
1434 *) Changed API in EVP library for cipher aliases.
1437 *) Added support for RC2/64bit cipher.
1440 *) Converted the lhash library to the crypto/mem.c functions.
1443 *) Added more recognized ASN.1 object ids.
1446 *) Added more RSA padding checks for SSL/TLS.
1449 *) Added BIO proxy/filter functionality.
1452 *) Added extra_certs to SSL_CTX which can be used
1453 send extra CA certificates to the client in the CA cert chain sending
1454 process. It can be configured with SSL_CTX_add_extra_chain_cert().
1457 *) Now Fortezza is denied in the authentication phase because
1458 this is key exchange mechanism is not supported by SSLeay at all.
1461 *) Additional PKCS1 checks.
1464 *) Support the string "TLSv1" for all TLS v1 ciphers.
1467 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
1468 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
1471 *) Fixed a few memory leaks.
1474 *) Fixed various code and comment typos.
1477 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
1478 bytes sent in the client random.
1479 [Edward Bishop <ebishop@spyglass.com>]
projects / openssl.git / blob