5 Changes between 0.9.6h and 0.9.7 [XX xxx 2002]
7 *) Introduce safe string copy and catenation functions
8 (BUF_strlcpy() and BUF_strlcat()).
9 [Ben Laurie (CHATS) and Richard Levitte]
11 *) Avoid using fixed-size buffers for one-line DNs.
14 *) Add BUF_MEM_grow_clean() to avoid information leakage when
15 resizing buffers containing secrets, and use where appropriate.
18 *) Avoid using fixed size buffers for configuration file location.
21 *) Avoid filename truncation for various CA files.
24 *) Use sizeof in preference to magic numbers.
27 *) Avoid filename truncation in cert requests.
30 *) Add assertions to check for (supposedly impossible) buffer
34 *) New OPENSSL_assert() macro (similar to assert(), but enabled
38 *) Don't cache truncated DNS entries in the local cache (this could
39 potentially lead to a spoofing attack).
42 *) Fix various buffers to be large enough for hex/decimal
43 representations in a platform independent manner.
46 *) Add CRYPTO_realloc_clean() to avoid information leakage when
47 resizing buffers containing secrets, and use where appropriate.
50 *) Add BIO_indent() to avoid much slightly worrying code to do
54 *) Convert sprintf()/BIO_puts() to BIO_printf().
57 *) buffer_gets() could terminate with the buffer only half
61 *) Add assertions to prevent crypto functions from overflowing
62 internal buffers by having large block sizes, etc.
65 *) Eliminate unused copy of key in RC4.
68 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
71 *) Fix off-by-one error in EGD path.
74 *) If RANDFILE path is too long, ignore instead of truncating.
77 *) Eliminate unused and incorrectly sized X.509 structure
81 *) Eliminate unused and dangerous function knumber().
84 *) Eliminate unused and dangerous structure, KSSL_ERR.
87 *) Protect against overlong session ID context length in an encoded
88 session object. Since these are local, this does not appear to be
92 *) Change from security patch (see 0.9.6e below) that did not affect
93 the 0.9.6 release series:
95 Remote buffer overflow in SSL3 protocol - an attacker could
96 supply an oversized master key in Kerberos-enabled versions.
100 *) Change the SSL kerb5 codes to match RFC 2712.
103 *) Make -nameopt work fully for req and add -reqopt switch.
104 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
106 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
107 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
109 *) Make sure tests can be performed even if the corresponding algorithms
110 have been removed entirely. This was also the last step to make
111 OpenSSL compilable with DJGPP under all reasonable conditions.
112 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
114 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
115 to allow version independent disabling of normally unselected ciphers,
116 which may be activated as a side-effect of selecting a single cipher.
118 (E.g., cipher list string "RSA" enables ciphersuites that are left
119 out of "ALL" because they do not provide symmetric encryption.
120 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
121 [Lutz Jaenicke, Bodo Moeller]
123 *) Add appropriate support for separate platform-dependent build
124 directories. The recommended way to make a platform-dependent
125 build directory is the following (tested on Linux), maybe with
128 # Place yourself outside of the OpenSSL source tree. In
129 # this example, the environment variable OPENSSL_SOURCE
130 # is assumed to contain the absolute OpenSSL source directory.
131 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
132 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
133 (cd $OPENSSL_SOURCE; find . -type f -o -type l) | while read F; do
134 mkdir -p `dirname $F`
135 ln -s $OPENSSL_SOURCE/$F $F
138 To be absolutely sure not to disturb the source tree, a "make clean"
139 is a good thing. If it isn't successfull, don't worry about it,
140 it probably means the source directory is very clean.
143 *) Make sure any ENGINE control commands make local copies of string
144 pointers passed to them whenever necessary. Otherwise it is possible
145 the caller may have overwritten (or deallocated) the original string
146 data when a later ENGINE operation tries to use the stored values.
147 [Götz Babin-Ebell <babinebell@trustcenter.de>]
149 *) Improve diagnostics in file reading and command-line digests.
150 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
152 *) Add AES modes CFB and OFB to the object database. Correct an
153 error in AES-CFB decryption.
156 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
157 allows existing EVP_CIPHER_CTX structures to be reused after
158 calling EVP_*Final(). This behaviour is used by encryption
159 BIOs and some applications. This has the side effect that
160 applications must explicitly clean up cipher contexts with
161 EVP_CIPHER_CTX_cleanup() or they will leak memory.
164 *) Check the values of dna and dnb in bn_mul_recursive before calling
165 bn_mul_comba (a non zero value means the a or b arrays do not contain
166 n2 elements) and fallback to bn_mul_normal if either is not zero.
169 *) Fix escaping of non-ASCII characters when using the -subj option
170 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
173 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
174 form for "surname", serialNumber has no short form.
175 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
176 therefore remove "mail" short name for "internet 7".
177 The OID for unique identifiers in X509 certificates is
178 x500UniqueIdentifier, not uniqueIdentifier.
179 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
182 *) Add an "init" command to the ENGINE config module and auto initialize
183 ENGINEs. Without any "init" command the ENGINE will be initialized
184 after all ctrl commands have been executed on it. If init=1 the
185 ENGINE is initailized at that point (ctrls before that point are run
186 on the uninitialized ENGINE and after on the initialized one). If
187 init=0 then the ENGINE will not be iniatialized at all.
190 *) Fix the 'app_verify_callback' interface so that the user-defined
191 argument is actually passed to the callback: In the
192 SSL_CTX_set_cert_verify_callback() prototype, the callback
193 declaration has been changed from
196 int (*cb)(X509_STORE_CTX *,void *);
197 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
198 i=s->ctx->app_verify_callback(&ctx)
199 has been changed into
200 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
202 To update applications using SSL_CTX_set_cert_verify_callback(),
203 a dummy argument can be added to their callback functions.
204 [D. K. Smetters <smetters@parc.xerox.com>]
206 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
207 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
209 *) Add and OPENSSL_LOAD_CONF define which will cause
210 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
211 This allows older applications to transparently support certain
212 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
213 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
214 load the config file and OPENSSL_add_all_algorithms_conf() which will
215 always load it have also been added.
218 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
219 Adjust NIDs and EVP layer.
220 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
222 *) Config modules support in openssl utility.
224 Most commands now load modules from the config file,
225 though in a few (such as version) this isn't done
226 because it couldn't be used for anything.
228 In the case of ca and req the config file used is
229 the same as the utility itself: that is the -config
230 command line option can be used to specify an
234 *) Move default behaviour from OPENSSL_config(). If appname is NULL
235 use "openssl_conf" if filename is NULL use default openssl config file.
238 *) Add an argument to OPENSSL_config() to allow the use of an alternative
239 config section name. Add a new flag to tolerate a missing config file
240 and move code to CONF_modules_load_file().
243 *) Support for crypto accelerator cards from Accelerated Encryption
244 Processing, www.aep.ie. (Use engine 'aep')
245 The support was copied from 0.9.6c [engine] and adapted/corrected
246 to work with the new engine framework.
247 [AEP Inc. and Richard Levitte]
249 *) Support for SureWare crypto accelerator cards from Baltimore
250 Technologies. (Use engine 'sureware')
251 The support was copied from 0.9.6c [engine] and adapted
252 to work with the new engine framework.
255 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
256 make the newer ENGINE framework commands for the CHIL engine work.
257 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
259 *) Make it possible to produce shared libraries on ReliantUNIX.
260 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
262 *) Add the configuration target debug-linux-ppro.
263 Make 'openssl rsa' use the general key loading routines
264 implemented in apps.c, and make those routines able to
265 handle the key format FORMAT_NETSCAPE and the variant
267 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
269 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
270 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
272 *) Add -keyform to rsautl, and document -engine.
273 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
275 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
276 BIO_R_NO_SUCH_FILE error code rather than the generic
277 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
282 ERR_peek_last_error_line
283 ERR_peek_last_error_line_data.
287 ERR_peek_error_line_data,
288 but report on the latest error recorded rather than the first one
289 still in the error queue.
290 [Ben Laurie, Bodo Moeller]
292 *) default_algorithms option in ENGINE config module. This allows things
294 default_algorithms = ALL
295 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
298 *) Prelminary ENGINE config module.
301 *) New experimental application configuration code.
304 *) Change the AES code to follow the same name structure as all other
305 symmetric ciphers, and behave the same way. Move everything to
306 the directory crypto/aes, thereby obsoleting crypto/rijndael.
307 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
309 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
310 [Ben Laurie and Theo de Raadt]
312 *) Add option to output public keys in req command.
313 [Massimiliano Pala madwolf@openca.org]
315 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
316 (up to about 10% better than before for P-192 and P-224).
319 *) New functions/macros
321 SSL_CTX_set_msg_callback(ctx, cb)
322 SSL_CTX_set_msg_callback_arg(ctx, arg)
323 SSL_set_msg_callback(ssl, cb)
324 SSL_set_msg_callback_arg(ssl, arg)
326 to request calling a callback function
328 void cb(int write_p, int version, int content_type,
329 const void *buf, size_t len, SSL *ssl, void *arg)
331 whenever a protocol message has been completely received
332 (write_p == 0) or sent (write_p == 1). Here 'version' is the
333 protocol version according to which the SSL library interprets
334 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
335 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
336 the content type as defined in the SSL 3.0/TLS 1.0 protocol
337 specification (change_cipher_spec(20), alert(21), handshake(22)).
338 'buf' and 'len' point to the actual message, 'ssl' to the
339 SSL object, and 'arg' is the application-defined value set by
340 SSL[_CTX]_set_msg_callback_arg().
342 'openssl s_client' and 'openssl s_server' have new '-msg' options
343 to enable a callback that displays all protocol messages.
346 *) Change the shared library support so shared libraries are built as
347 soon as the corresponding static library is finished, and thereby get
348 openssl and the test programs linked against the shared library.
349 This still only happens when the keyword "shard" has been given to
350 the configuration scripts.
352 NOTE: shared library support is still an experimental thing, and
353 backward binary compatibility is still not guaranteed.
354 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
356 *) Add support for Subject Information Access extension.
357 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
359 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
360 additional bytes when new memory had to be allocated, not just
361 when reusing an existing buffer.
364 *) New command line and configuration option 'utf8' for the req command.
365 This allows field values to be specified as UTF8 strings.
368 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
369 runs for the former and machine-readable output for the latter.
372 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
373 of the e-mail address in the DN (i.e., it will go into a certificate
374 extension only). The new configuration file option 'email_in_dn = no'
376 [Massimiliano Pala madwolf@openca.org]
378 *) Change all functions with names starting with des_ to be starting
379 with DES_ instead. Add wrappers that are compatible with libdes,
380 but are named _ossl_old_des_*. Finally, add macros that map the
381 des_* symbols to the corresponding _ossl_old_des_* if libdes
382 compatibility is desired. If OpenSSL 0.9.6c compatibility is
383 desired, the des_* symbols will be mapped to DES_*, with one
386 Since we provide two compatibility mappings, the user needs to
387 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
388 compatibility is desired. The default (i.e., when that macro
389 isn't defined) is OpenSSL 0.9.6c compatibility.
391 There are also macros that enable and disable the support of old
392 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
393 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
394 are defined, the default will apply: to support the old des routines.
396 In either case, one must include openssl/des.h to get the correct
397 definitions. Do not try to just include openssl/des_old.h, that
400 NOTE: This is a major break of an old API into a new one. Software
401 authors are encouraged to switch to the DES_ style functions. Some
402 time in the future, des_old.h and the libdes compatibility functions
403 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
404 default), and then completely removed.
407 *) Test for certificates which contain unsupported critical extensions.
408 If such a certificate is found during a verify operation it is
409 rejected by default: this behaviour can be overridden by either
410 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
411 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
412 X509_supported_extension() has also been added which returns 1 if a
413 particular extension is supported.
416 *) Modify the behaviour of EVP cipher functions in similar way to digests
417 to retain compatibility with existing code.
420 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
421 compatibility with existing code. In particular the 'ctx' parameter does
422 not have to be to be initialized before the call to EVP_DigestInit() and
423 it is tidied up after a call to EVP_DigestFinal(). New function
424 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
425 EVP_MD_CTX_copy() changed to not require the destination to be
426 initialized valid and new function EVP_MD_CTX_copy_ex() added which
427 requires the destination to be valid.
429 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
430 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
433 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
434 so that complete 'Handshake' protocol structures are kept in memory
435 instead of overwriting 'msg_type' and 'length' with 'body' data.
438 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
439 [Massimo Santin via Richard Levitte]
441 *) Major restructuring to the underlying ENGINE code. This includes
442 reduction of linker bloat, separation of pure "ENGINE" manipulation
443 (initialisation, etc) from functionality dealing with implementations
444 of specific crypto iterfaces. This change also introduces integrated
445 support for symmetric ciphers and digest implementations - so ENGINEs
446 can now accelerate these by providing EVP_CIPHER and EVP_MD
447 implementations of their own. This is detailed in crypto/engine/README
448 as it couldn't be adequately described here. However, there are a few
449 API changes worth noting - some RSA, DSA, DH, and RAND functions that
450 were changed in the original introduction of ENGINE code have now
451 reverted back - the hooking from this code to ENGINE is now a good
452 deal more passive and at run-time, operations deal directly with
453 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
454 dereferencing through an ENGINE pointer any more. Also, the ENGINE
455 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
456 they were not being used by the framework as there is no concept of a
457 BIGNUM_METHOD and they could not be generalised to the new
458 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
459 ENGINE_cpy() has been removed as it cannot be consistently defined in
463 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
466 *) Change mkdef.pl to sort symbols that get the same entry number,
467 and make sure the automatically generated functions ERR_load_*
468 become part of libeay.num as well.
471 *) New function SSL_renegotiate_pending(). This returns true once
472 renegotiation has been requested (either SSL_renegotiate() call
473 or HelloRequest/ClientHello receveived from the peer) and becomes
474 false once a handshake has been completed.
475 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
476 sends a HelloRequest, but does not ensure that a handshake takes
477 place. SSL_renegotiate_pending() is useful for checking if the
478 client has followed the request.)
481 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
482 By default, clients may request session resumption even during
483 renegotiation (if session ID contexts permit); with this option,
484 session resumption is possible only in the first handshake.
486 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
487 more bits available for options that should not be part of
488 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
491 *) Add some demos for certificate and certificate request creation.
494 *) Make maximum certificate chain size accepted from the peer application
495 settable (SSL*_get/set_max_cert_list()), as proposed by
496 "Douglas E. Engert" <deengert@anl.gov>.
499 *) Add support for shared libraries for Unixware-7
500 (Boyd Lynn Gerber <gerberb@zenez.com>).
503 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
504 be done prior to destruction. Use this to unload error strings from
505 ENGINEs that load their own error strings. NB: This adds two new API
506 functions to "get" and "set" this destroy handler in an ENGINE.
509 *) Alter all existing ENGINE implementations (except "openssl" and
510 "openbsd") to dynamically instantiate their own error strings. This
511 makes them more flexible to be built both as statically-linked ENGINEs
512 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
513 Also, add stub code to each that makes building them as self-contained
514 shared-libraries easier (see README.ENGINE).
517 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
518 implementations into applications that are completely implemented in
519 self-contained shared-libraries. The "dynamic" ENGINE exposes control
520 commands that can be used to configure what shared-library to load and
521 to control aspects of the way it is handled. Also, made an update to
522 the README.ENGINE file that brings its information up-to-date and
523 provides some information and instructions on the "dynamic" ENGINE
524 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
527 *) Make it possible to unload ranges of ERR strings with a new
528 "ERR_unload_strings" function.
531 *) Add a copy() function to EVP_MD.
534 *) Make EVP_MD routines take a context pointer instead of just the
535 md_data void pointer.
538 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
539 that the digest can only process a single chunk of data
540 (typically because it is provided by a piece of
541 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
542 is only going to provide a single chunk of data, and hence the
543 framework needn't accumulate the data for oneshot drivers.
546 *) As with "ERR", make it possible to replace the underlying "ex_data"
547 functions. This change also alters the storage and management of global
548 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
549 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
550 index counters. The API functions that use this state have been changed
551 to take a "class_index" rather than pointers to the class's local STACK
552 and counter, and there is now an API function to dynamically create new
553 classes. This centralisation allows us to (a) plug a lot of the
554 thread-safety problems that existed, and (b) makes it possible to clean
555 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
556 such data would previously have always leaked in application code and
557 workarounds were in place to make the memory debugging turn a blind eye
558 to it. Application code that doesn't use this new function will still
559 leak as before, but their memory debugging output will announce it now
560 rather than letting it slide.
562 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
563 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
564 has a return value to indicate success or failure.
567 *) Make it possible to replace the underlying "ERR" functions such that the
568 global state (2 LHASH tables and 2 locks) is only used by the "default"
569 implementation. This change also adds two functions to "get" and "set"
570 the implementation prior to it being automatically set the first time
571 any other ERR function takes place. Ie. an application can call "get",
572 pass the return value to a module it has just loaded, and that module
573 can call its own "set" function using that value. This means the
574 module's "ERR" operations will use (and modify) the error state in the
575 application and not in its own statically linked copy of OpenSSL code.
578 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
579 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
580 the operation, and provides a more encapsulated way for external code
581 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
582 to use these functions rather than manually incrementing the counts.
584 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
587 *) Add EVP test program.
590 *) Add symmetric cipher support to ENGINE. Expect the API to change!
593 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
594 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
595 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
596 These allow a CRL to be built without having to access X509_CRL fields
597 directly. Modify 'ca' application to use new functions.
600 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
601 bug workarounds. Rollback attack detection is a security feature.
602 The problem will only arise on OpenSSL servers when TLSv1 is not
603 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
604 Software authors not wanting to support TLSv1 will have special reasons
605 for their choice and can explicitly enable this option.
606 [Bodo Moeller, Lutz Jaenicke]
608 *) Rationalise EVP so it can be extended: don't include a union of
609 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
610 (similar to those existing for EVP_CIPHER_CTX).
615 EVP_MD_CTX_init(&md); /* new function call */
616 EVP_DigestInit(&md, EVP_sha1());
617 EVP_DigestUpdate(&md, in, len);
618 EVP_DigestFinal(&md, out, NULL);
619 EVP_MD_CTX_cleanup(&md); /* new function call */
623 *) Make DES key schedule conform to the usual scheme, as well as
624 correcting its structure. This means that calls to DES functions
625 now have to pass a pointer to a des_key_schedule instead of a
626 plain des_key_schedule (which was actually always a pointer
631 des_set_key_checked(..., &ks);
632 des_ncbc_encrypt(..., &ks, ...);
634 (Note that a later change renames 'des_...' into 'DES_...'.)
637 *) Initial reduction of linker bloat: the use of some functions, such as
638 PEM causes large amounts of unused functions to be linked in due to
639 poor organisation. For example pem_all.c contains every PEM function
640 which has a knock on effect of linking in large amounts of (unused)
641 ASN1 code. Grouping together similar functions and splitting unrelated
642 functions prevents this.
645 *) Cleanup of EVP macros.
648 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
652 *) Add initial OCSP responder support to ocsp application. The
653 revocation information is handled using the text based index
654 use by the ca application. The responder can either handle
655 requests generated internally, supplied in files (for example
656 via a CGI script) or using an internal minimal server.
659 *) Add configuration choices to get zlib compression for TLS.
662 *) Changes to Kerberos SSL for RFC 2712 compliance:
663 1. Implemented real KerberosWrapper, instead of just using
664 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
665 2. Implemented optional authenticator field of KerberosWrapper.
667 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
668 and authenticator structs; see crypto/krb5/.
670 Generalized Kerberos calls to support multiple Kerberos libraries.
671 [Vern Staats <staatsvr@asc.hpc.mil>,
672 Jeffrey Altman <jaltman@columbia.edu>
675 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
676 already does with RSA. testdsa.h now has 'priv_key/pub_key'
677 values for each of the key sizes rather than having just
678 parameters (and 'speed' generating keys each time).
681 *) Speed up EVP routines.
684 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
685 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
686 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
687 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
689 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
690 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
691 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
694 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
696 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
699 *) Added the OS2-EMX target.
700 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
702 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
703 to support NCONF routines in extension code. New function CONF_set_nconf()
704 to allow functions which take an NCONF to also handle the old LHASH
705 structure: this means that the old CONF compatible routines can be
706 retained (in particular wrt extensions) without having to duplicate the
707 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
710 *) Enhance the general user interface with mechanisms for inner control
711 and with possibilities to have yes/no kind of prompts.
714 *) Change all calls to low level digest routines in the library and
715 applications to use EVP. Add missing calls to HMAC_cleanup() and
716 don't assume HMAC_CTX can be copied using memcpy().
717 [Verdon Walker <VWalker@novell.com>, Steve Henson]
719 *) Add the possibility to control engines through control names but with
720 arbitrary arguments instead of just a string.
721 Change the key loaders to take a UI_METHOD instead of a callback
722 function pointer. NOTE: this breaks binary compatibility with earlier
723 versions of OpenSSL [engine].
724 Adapt the nCipher code for these new conditions and add a card insertion
728 *) Enhance the general user interface with mechanisms to better support
729 dialog box interfaces, application-defined prompts, the possibility
730 to use defaults (for example default passwords from somewhere else)
731 and interrupts/cancellations.
734 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
735 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
738 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
739 tidy up some unnecessarily weird code in 'sk_new()').
740 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
742 *) Change the key loading routines for ENGINEs to use the same kind
743 callback (pem_password_cb) as all other routines that need this
747 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
748 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
749 than this minimum value is recommended.
752 *) New random seeder for OpenVMS, using the system process statistics
753 that are easily reachable.
756 *) Windows apparently can't transparently handle global
757 variables defined in DLLs. Initialisations such as:
759 const ASN1_ITEM *it = &ASN1_INTEGER_it;
761 wont compile. This is used by the any applications that need to
762 declare their own ASN1 modules. This was fixed by adding the option
763 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
764 needed for static libraries under Win32.
767 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
768 setting of purpose and trust fields. New X509_STORE trust and
769 purpose functions and tidy up setting in other SSL functions.
772 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
773 structure. These are inherited by X509_STORE_CTX when it is
774 initialised. This allows various defaults to be set in the
775 X509_STORE structure (such as flags for CRL checking and custom
776 purpose or trust settings) for functions which only use X509_STORE_CTX
777 internally such as S/MIME.
779 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
780 trust settings if they are not set in X509_STORE. This allows X509_STORE
781 purposes and trust (in S/MIME for example) to override any set by default.
783 Add command line options for CRL checking to smime, s_client and s_server
787 *) Initial CRL based revocation checking. If the CRL checking flag(s)
788 are set then the CRL is looked up in the X509_STORE structure and
789 its validity and signature checked, then if the certificate is found
790 in the CRL the verify fails with a revoked error.
792 Various new CRL related callbacks added to X509_STORE_CTX structure.
794 Command line options added to 'verify' application to support this.
796 This needs some additional work, such as being able to handle multiple
797 CRLs with different times, extension based lookup (rather than just
798 by subject name) and ultimately more complete V2 CRL extension
802 *) Add a general user interface API (crypto/ui/). This is designed
803 to replace things like des_read_password and friends (backward
804 compatibility functions using this new API are provided).
805 The purpose is to remove prompting functions from the DES code
806 section as well as provide for prompting through dialog boxes in
807 a window system and the like.
810 *) Add "ex_data" support to ENGINE so implementations can add state at a
811 per-structure level rather than having to store it globally.
814 *) Make it possible for ENGINE structures to be copied when retrieved by
815 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
816 This causes the "original" ENGINE structure to act like a template,
817 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
818 operational state can be localised to each ENGINE structure, despite the
819 fact they all share the same "methods". New ENGINE structures returned in
820 this case have no functional references and the return value is the single
821 structural reference. This matches the single structural reference returned
822 by ENGINE_by_id() normally, when it is incremented on the pre-existing
826 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
827 needs to match any other type at all we need to manually clear the
831 *) Changes to the "openssl engine" utility to include;
832 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
833 about an ENGINE's available control commands.
834 - executing control commands from command line arguments using the
835 '-pre' and '-post' switches. '-post' is only used if '-t' is
836 specified and the ENGINE is successfully initialised. The syntax for
837 the individual commands are colon-separated, for example;
838 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
841 *) New dynamic control command support for ENGINEs. ENGINEs can now
842 declare their own commands (numbers), names (strings), descriptions,
843 and input types for run-time discovery by calling applications. A
844 subset of these commands are implicitly classed as "executable"
845 depending on their input type, and only these can be invoked through
846 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
847 can be based on user input, config files, etc). The distinction is
848 that "executable" commands cannot return anything other than a boolean
849 result and can only support numeric or string input, whereas some
850 discoverable commands may only be for direct use through
851 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
852 pointers, or other custom uses. The "executable" commands are to
853 support parameterisations of ENGINE behaviour that can be
854 unambiguously defined by ENGINEs and used consistently across any
855 OpenSSL-based application. Commands have been added to all the
856 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
857 control over shared-library paths without source code alterations.
860 *) Changed all ENGINE implementations to dynamically allocate their
861 ENGINEs rather than declaring them statically. Apart from this being
862 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
863 this also allows the implementations to compile without using the
864 internal engine_int.h header.
867 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
868 'const' value. Any code that should be able to modify a RAND_METHOD
869 should already have non-const pointers to it (ie. they should only
870 modify their own ones).
873 *) Made a variety of little tweaks to the ENGINE code.
874 - "atalla" and "ubsec" string definitions were moved from header files
875 to C code. "nuron" string definitions were placed in variables
876 rather than hard-coded - allowing parameterisation of these values
877 later on via ctrl() commands.
878 - Removed unused "#if 0"'d code.
879 - Fixed engine list iteration code so it uses ENGINE_free() to release
880 structural references.
881 - Constified the RAND_METHOD element of ENGINE structures.
882 - Constified various get/set functions as appropriate and added
883 missing functions (including a catch-all ENGINE_cpy that duplicates
884 all ENGINE values onto a new ENGINE except reference counts/state).
885 - Removed NULL parameter checks in get/set functions. Setting a method
886 or function to NULL is a way of cancelling out a previously set
887 value. Passing a NULL ENGINE parameter is just plain stupid anyway
888 and doesn't justify the extra error symbols and code.
889 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
890 flags from engine_int.h to engine.h.
891 - Changed prototypes for ENGINE handler functions (init(), finish(),
892 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
895 *) Implement binary inversion algorithm for BN_mod_inverse in addition
896 to the algorithm using long division. The binary algorithm can be
897 used only if the modulus is odd. On 32-bit systems, it is faster
898 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
899 roughly 5-15% for 256-bit moduli), so we use it only for moduli
900 up to 450 bits. In 64-bit environments, the binary algorithm
901 appears to be advantageous for much longer moduli; here we use it
902 for moduli up to 2048 bits.
905 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
906 could not support the combine flag in choice fields.
909 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
910 extensions from a certificate request to the certificate.
913 *) Allow multiple 'certopt' and 'nameopt' options to be separated
914 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
915 file: this allows the display of the certificate about to be
916 signed to be customised, to allow certain fields to be included
917 or excluded and extension details. The old system didn't display
918 multicharacter strings properly, omitted fields not in the policy
919 and couldn't display additional details such as extensions.
922 *) Function EC_POINTs_mul for multiple scalar multiplication
923 of an arbitrary number of elliptic curve points
924 \sum scalars[i]*points[i],
925 optionally including the generator defined for the EC_GROUP:
926 scalar*generator + \sum scalars[i]*points[i].
928 EC_POINT_mul is a simple wrapper function for the typical case
929 that the point list has just one item (besides the optional
933 *) First EC_METHODs for curves over GF(p):
935 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
936 operations and provides various method functions that can also
937 operate with faster implementations of modular arithmetic.
939 EC_GFp_mont_method() reuses most functions that are part of
940 EC_GFp_simple_method, but uses Montgomery arithmetic.
942 [Bodo Moeller; point addition and point doubling
943 implementation directly derived from source code provided by
944 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
946 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
949 Curves are EC_GROUP objects (with an optional group generator)
950 based on EC_METHODs that are built into the library.
952 Points are EC_POINT objects based on EC_GROUP objects.
954 Most of the framework would be able to handle curves over arbitrary
955 finite fields, but as there are no obvious types for fields other
956 than GF(p), some functions are limited to that for now.
959 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
960 that the file contains a complete HTTP response.
963 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
964 change the def and num file printf format specifier from "%-40sXXX"
965 to "%-39s XXX". The latter will always guarantee a space after the
966 field while the former will cause them to run together if the field
967 is 40 of more characters long.
970 *) Constify the cipher and digest 'method' functions and structures
971 and modify related functions to take constant EVP_MD and EVP_CIPHER
975 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
976 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
979 *) Modify EVP_Digest*() routines so they now return values. Although the
980 internal software routines can never fail additional hardware versions
984 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
986 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
987 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
990 ERR_R_NESTED_ASN1_ERROR
992 ERR_R_MISSING_ASN1_EOS
993 were 4 .. 9, conflicting with
994 ERR_LIB_RSA (= ERR_R_RSA_LIB)
996 ERR_LIB_PEM (= ERR_R_PEM_LIB).
997 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
999 Add new error code 'ERR_R_INTERNAL_ERROR'.
1002 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
1006 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
1007 sets the subject name for a new request or supersedes the
1008 subject name in a given request. Formats that can be parsed are
1009 'CN=Some Name, OU=myOU, C=IT'
1011 'CN=Some Name/OU=myOU/C=IT'.
1013 Add options '-batch' and '-verbose' to 'openssl req'.
1014 [Massimiliano Pala <madwolf@hackmasters.net>]
1016 *) Introduce the possibility to access global variables through
1017 functions on platform were that's the best way to handle exporting
1018 global variables in shared libraries. To enable this functionality,
1019 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
1020 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
1021 is normally done by Configure or something similar).
1023 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
1024 in the source file (foo.c) like this:
1026 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
1027 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
1029 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
1030 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
1032 OPENSSL_DECLARE_GLOBAL(int,foo);
1033 #define foo OPENSSL_GLOBAL_REF(foo)
1034 OPENSSL_DECLARE_GLOBAL(double,bar);
1035 #define bar OPENSSL_GLOBAL_REF(bar)
1037 The #defines are very important, and therefore so is including the
1038 header file everywhere where the defined globals are used.
1040 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
1041 of ASN.1 items, but that structure is a bit different.
1043 The largest change is in util/mkdef.pl which has been enhanced with
1044 better and easier to understand logic to choose which symbols should
1045 go into the Windows .def files as well as a number of fixes and code
1046 cleanup (among others, algorithm keywords are now sorted
1047 lexicographically to avoid constant rewrites).
1050 *) In BN_div() keep a copy of the sign of 'num' before writing the
1051 result to 'rm' because if rm==num the value will be overwritten
1052 and produce the wrong result if 'num' is negative: this caused
1053 problems with BN_mod() and BN_nnmod().
1056 *) Function OCSP_request_verify(). This checks the signature on an
1057 OCSP request and verifies the signer certificate. The signer
1058 certificate is just checked for a generic purpose and OCSP request
1062 *) Add OCSP_check_validity() function to check the validity of OCSP
1063 responses. OCSP responses are prepared in real time and may only
1064 be a few seconds old. Simply checking that the current time lies
1065 between thisUpdate and nextUpdate max reject otherwise valid responses
1066 caused by either OCSP responder or client clock inaccuracy. Instead
1067 we allow thisUpdate and nextUpdate to fall within a certain period of
1068 the current time. The age of the response can also optionally be
1069 checked. Two new options -validity_period and -status_age added to
1073 *) If signature or public key algorithm is unrecognized print out its
1074 OID rather that just UNKNOWN.
1077 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
1078 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
1079 ID to be generated from the issuer certificate alone which can then be
1080 passed to OCSP_id_issuer_cmp().
1083 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
1084 ASN1 modules to export functions returning ASN1_ITEM pointers
1085 instead of the ASN1_ITEM structures themselves. This adds several
1086 new macros which allow the underlying ASN1 function/structure to
1087 be accessed transparently. As a result code should not use ASN1_ITEM
1088 references directly (such as &X509_it) but instead use the relevant
1089 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
1090 use of the new ASN1 code on platforms where exporting structures
1091 is problematical (for example in shared libraries) but exporting
1092 functions returning pointers to structures is not.
1095 *) Add support for overriding the generation of SSL/TLS session IDs.
1096 These callbacks can be registered either in an SSL_CTX or per SSL.
1097 The purpose of this is to allow applications to control, if they wish,
1098 the arbitrary values chosen for use as session IDs, particularly as it
1099 can be useful for session caching in multiple-server environments. A
1100 command-line switch for testing this (and any client code that wishes
1101 to use such a feature) has been added to "s_server".
1102 [Geoff Thorpe, Lutz Jaenicke]
1104 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
1105 of the form '#if defined(...) || defined(...) || ...' and
1106 '#if !defined(...) && !defined(...) && ...'. This also avoids
1107 the growing number of special cases it was previously handling.
1110 *) Make all configuration macros available for application by making
1111 sure they are available in opensslconf.h, by giving them names starting
1112 with "OPENSSL_" to avoid conflicts with other packages and by making
1113 sure e_os2.h will cover all platform-specific cases together with
1115 Additionally, it is now possible to define configuration/platform-
1116 specific names (called "system identities"). In the C code, these
1117 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
1118 macro with the name beginning with "OPENSSL_SYS_", which is determined
1119 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
1123 *) New option -set_serial to 'req' and 'x509' this allows the serial
1124 number to use to be specified on the command line. Previously self
1125 signed certificates were hard coded with serial number 0 and the
1126 CA options of 'x509' had to use a serial number in a file which was
1130 *) New options to 'ca' utility to support V2 CRL entry extensions.
1131 Currently CRL reason, invalidity date and hold instruction are
1132 supported. Add new CRL extensions to V3 code and some new objects.
1135 *) New function EVP_CIPHER_CTX_set_padding() this is used to
1136 disable standard block padding (aka PKCS#5 padding) in the EVP
1137 API, which was previously mandatory. This means that the data is
1138 not padded in any way and so the total length much be a multiple
1139 of the block size, otherwise an error occurs.
1142 *) Initial (incomplete) OCSP SSL support.
1145 *) New function OCSP_parse_url(). This splits up a URL into its host,
1146 port and path components: primarily to parse OCSP URLs. New -url
1147 option to ocsp utility.
1150 *) New nonce behavior. The return value of OCSP_check_nonce() now
1151 reflects the various checks performed. Applications can decide
1152 whether to tolerate certain situations such as an absent nonce
1153 in a response when one was present in a request: the ocsp application
1154 just prints out a warning. New function OCSP_add1_basic_nonce()
1155 this is to allow responders to include a nonce in a response even if
1156 the request is nonce-less.
1159 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
1160 skipped when using openssl x509 multiple times on a single input file,
1161 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
1164 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
1165 set string type: to handle setting ASN1_TIME structures. Fix ca
1166 utility to correctly initialize revocation date of CRLs.
1169 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
1170 the clients preferred ciphersuites and rather use its own preferences.
1171 Should help to work around M$ SGC (Server Gated Cryptography) bug in
1172 Internet Explorer by ensuring unchanged hash method during stepup.
1173 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
1176 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
1177 to aes and add a new 'exist' option to print out symbols that don't
1181 *) Additional options to ocsp utility to allow flags to be set and
1182 additional certificates supplied.
1185 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
1186 OCSP client a number of certificate to only verify the response
1190 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
1191 handle the new API. Currently only ECB, CBC modes supported. Add new
1194 Add TLS AES ciphersuites as described in RFC3268, "Advanced
1195 Encryption Standard (AES) Ciphersuites for Transport Layer
1196 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
1197 not enabled by default and were not part of the "ALL" ciphersuite
1198 alias because they were not yet official; they could be
1199 explicitly requested by specifying the "AESdraft" ciphersuite
1200 group alias. In the final release of OpenSSL 0.9.7, the group
1201 alias is called "AES" and is part of "ALL".)
1202 [Ben Laurie, Steve Henson, Bodo Moeller]
1204 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
1205 request to response.
1208 *) Functions for OCSP responders. OCSP_request_onereq_count(),
1209 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
1210 extract information from a certificate request. OCSP_response_create()
1211 creates a response and optionally adds a basic response structure.
1212 OCSP_basic_add1_status() adds a complete single response to a basic
1213 response and returns the OCSP_SINGLERESP structure just added (to allow
1214 extensions to be included for example). OCSP_basic_add1_cert() adds a
1215 certificate to a basic response and OCSP_basic_sign() signs a basic
1216 response with various flags. New helper functions ASN1_TIME_check()
1217 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
1218 (converts ASN1_TIME to GeneralizedTime).
1221 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
1222 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
1223 structure from a certificate. X509_pubkey_digest() digests the public_key
1224 contents: this is used in various key identifiers.
1227 *) Make sk_sort() tolerate a NULL argument.
1228 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
1230 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
1231 passed by the function are trusted implicitly. If any of them signed the
1232 response then it is assumed to be valid and is not verified.
1235 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
1236 to data. This was previously part of the PKCS7 ASN1 code. This
1237 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
1238 [Steve Henson, reported by Kenneth R. Robinette
1239 <support@securenetterm.com>]
1241 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
1242 routines: without these tracing memory leaks is very painful.
1243 Fix leaks in PKCS12 and PKCS7 routines.
1246 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
1247 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
1248 effectively meant GeneralizedTime would never be used. Now it
1249 is initialised to -1 but X509_time_adj() now has to check the value
1250 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
1251 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
1252 [Steve Henson, reported by Kenneth R. Robinette
1253 <support@securenetterm.com>]
1255 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
1256 result in a zero length in the ASN1_INTEGER structure which was
1257 not consistent with the structure when d2i_ASN1_INTEGER() was used
1258 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
1259 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
1260 where it did not print out a minus for negative ASN1_INTEGER.
1263 *) Add summary printout to ocsp utility. The various functions which
1264 convert status values to strings have been renamed to:
1265 OCSP_response_status_str(), OCSP_cert_status_str() and
1266 OCSP_crl_reason_str() and are no longer static. New options
1267 to verify nonce values and to disable verification. OCSP response
1268 printout format cleaned up.
1271 *) Add additional OCSP certificate checks. These are those specified
1272 in RFC2560. This consists of two separate checks: the CA of the
1273 certificate being checked must either be the OCSP signer certificate
1274 or the issuer of the OCSP signer certificate. In the latter case the
1275 OCSP signer certificate must contain the OCSP signing extended key
1276 usage. This check is performed by attempting to match the OCSP
1277 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
1278 in the OCSP_CERTID structures of the response.
1281 *) Initial OCSP certificate verification added to OCSP_basic_verify()
1282 and related routines. This uses the standard OpenSSL certificate
1283 verify routines to perform initial checks (just CA validity) and
1284 to obtain the certificate chain. Then additional checks will be
1285 performed on the chain. Currently the root CA is checked to see
1286 if it is explicitly trusted for OCSP signing. This is used to set
1287 a root CA as a global signing root: that is any certificate that
1288 chains to that CA is an acceptable OCSP signing certificate.
1291 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
1292 extensions from a separate configuration file.
1293 As when reading extensions from the main configuration file,
1294 the '-extensions ...' option may be used for specifying the
1296 [Massimiliano Pala <madwolf@comune.modena.it>]
1298 *) New OCSP utility. Allows OCSP requests to be generated or
1299 read. The request can be sent to a responder and the output
1300 parsed, outputed or printed in text form. Not complete yet:
1301 still needs to check the OCSP response validity.
1304 *) New subcommands for 'openssl ca':
1305 'openssl ca -status <serial>' prints the status of the cert with
1306 the given serial number (according to the index file).
1307 'openssl ca -updatedb' updates the expiry status of certificates
1309 [Massimiliano Pala <madwolf@comune.modena.it>]
1311 *) New '-newreq-nodes' command option to CA.pl. This is like
1312 '-newreq', but calls 'openssl req' with the '-nodes' option
1313 so that the resulting key is not encrypted.
1314 [Damien Miller <djm@mindrot.org>]
1316 *) New configuration for the GNU Hurd.
1317 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
1319 *) Initial code to implement OCSP basic response verify. This
1320 is currently incomplete. Currently just finds the signer's
1321 certificate and verifies the signature on the response.
1324 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
1325 value of OPENSSLDIR. This is available via the new '-d' option
1326 to 'openssl version', and is also included in 'openssl version -a'.
1329 *) Allowing defining memory allocation callbacks that will be given
1330 file name and line number information in additional arguments
1331 (a const char* and an int). The basic functionality remains, as
1332 well as the original possibility to just replace malloc(),
1333 realloc() and free() by functions that do not know about these
1334 additional arguments. To register and find out the current
1335 settings for extended allocation functions, the following
1336 functions are provided:
1338 CRYPTO_set_mem_ex_functions
1339 CRYPTO_set_locked_mem_ex_functions
1340 CRYPTO_get_mem_ex_functions
1341 CRYPTO_get_locked_mem_ex_functions
1343 These work the same way as CRYPTO_set_mem_functions and friends.
1344 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
1345 extended allocation function is enabled.
1346 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
1347 a conventional allocation function is enabled.
1348 [Richard Levitte, Bodo Moeller]
1350 *) Finish off removing the remaining LHASH function pointer casts.
1351 There should no longer be any prototype-casting required when using
1352 the LHASH abstraction, and any casts that remain are "bugs". See
1353 the callback types and macros at the head of lhash.h for details
1354 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
1357 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
1358 If /dev/[u]random devices are not available or do not return enough
1359 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
1361 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
1362 /etc/entropy will be queried once each in this sequence, quering stops
1363 when enough entropy was collected without querying more sockets.
1366 *) Change the Unix RAND_poll() variant to be able to poll several
1367 random devices, as specified by DEVRANDOM, until a sufficient amount
1368 of data has been collected. We spend at most 10 ms on each file
1369 (select timeout) and read in non-blocking mode. DEVRANDOM now
1370 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
1371 (previously it was just the string "/dev/urandom"), so on typical
1372 platforms the 10 ms delay will never occur.
1373 Also separate out the Unix variant to its own file, rand_unix.c.
1374 For VMS, there's a currently-empty rand_vms.c.
1377 *) Move OCSP client related routines to ocsp_cl.c. These
1378 provide utility functions which an application needing
1379 to issue a request to an OCSP responder and analyse the
1380 response will typically need: as opposed to those which an
1381 OCSP responder itself would need which will be added later.
1383 OCSP_request_sign() signs an OCSP request with an API similar
1384 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
1385 response. OCSP_response_get1_basic() extracts basic response
1386 from response. OCSP_resp_find_status(): finds and extracts status
1387 information from an OCSP_CERTID structure (which will be created
1388 when the request structure is built). These are built from lower
1389 level functions which work on OCSP_SINGLERESP structures but
1390 wont normally be used unless the application wishes to examine
1391 extensions in the OCSP response for example.
1393 Replace nonce routines with a pair of functions.
1394 OCSP_request_add1_nonce() adds a nonce value and optionally
1395 generates a random value. OCSP_check_nonce() checks the
1396 validity of the nonce in an OCSP response.
1399 *) Change function OCSP_request_add() to OCSP_request_add0_id().
1400 This doesn't copy the supplied OCSP_CERTID and avoids the
1401 need to free up the newly created id. Change return type
1402 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
1403 This can then be used to add extensions to the request.
1404 Deleted OCSP_request_new(), since most of its functionality
1405 is now in OCSP_REQUEST_new() (and the case insensitive name
1406 clash) apart from the ability to set the request name which
1407 will be added elsewhere.
1410 *) Update OCSP API. Remove obsolete extensions argument from
1411 various functions. Extensions are now handled using the new
1412 OCSP extension code. New simple OCSP HTTP function which
1413 can be used to send requests and parse the response.
1416 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
1417 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
1418 uses the special reorder version of SET OF to sort the attributes
1419 and reorder them to match the encoded order. This resolves a long
1420 standing problem: a verify on a PKCS7 structure just after signing
1421 it used to fail because the attribute order did not match the
1422 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
1423 it uses the received order. This is necessary to tolerate some broken
1424 software that does not order SET OF. This is handled by encoding
1425 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
1426 to produce the required SET OF.
1429 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
1430 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
1431 files to get correct declarations of the ASN.1 item variables.
1434 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
1435 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
1436 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
1437 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
1438 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
1439 ASN1_ITEM and no wrapper functions.
1442 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
1443 replace the old function pointer based I/O routines. Change most of
1444 the *_d2i_bio() and *_d2i_fp() functions to use these.
1447 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
1448 lines, recognice more "algorithms" that can be deselected, and make
1449 it complain about algorithm deselection that isn't recognised.
1452 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
1453 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
1454 to use new functions. Add NO_ASN1_OLD which can be set to remove
1455 some old style ASN1 functions: this can be used to determine if old
1456 code will still work when these eventually go away.
1459 *) New extension functions for OCSP structures, these follow the
1460 same conventions as certificates and CRLs.
1463 *) New function X509V3_add1_i2d(). This automatically encodes and
1464 adds an extension. Its behaviour can be customised with various
1465 flags to append, replace or delete. Various wrappers added for
1466 certifcates and CRLs.
1469 *) Fix to avoid calling the underlying ASN1 print routine when
1470 an extension cannot be parsed. Correct a typo in the
1471 OCSP_SERVICELOC extension. Tidy up print OCSP format.
1474 *) Make mkdef.pl parse some of the ASN1 macros and add apropriate
1475 entries for variables.
1478 *) Add functionality to apps/openssl.c for detecting locking
1479 problems: As the program is single-threaded, all we have
1480 to do is register a locking callback using an array for
1481 storing which locks are currently held by the program.
1484 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
1485 SSL_get_ex_data_X509_STORE_idx(), which is used in
1486 ssl_verify_cert_chain() and thus can be called at any time
1487 during TLS/SSL handshakes so that thread-safety is essential.
1488 Unfortunately, the ex_data design is not at all suited
1489 for multi-threaded use, so it probably should be abolished.
1492 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
1493 [Broadcom, tweaked and integrated by Geoff Thorpe]
1495 *) Move common extension printing code to new function
1496 X509V3_print_extensions(). Reorganise OCSP print routines and
1497 implement some needed OCSP ASN1 functions. Add OCSP extensions.
1500 *) New function X509_signature_print() to remove duplication in some
1504 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
1505 set (this was treated exactly the same as SET OF previously). This
1506 is used to reorder the STACK representing the structure to match the
1507 encoding. This will be used to get round a problem where a PKCS7
1508 structure which was signed could not be verified because the STACK
1509 order did not reflect the encoded order.
1512 *) Reimplement the OCSP ASN1 module using the new code.
1515 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
1516 for its ASN1 operations. The old style function pointers still exist
1517 for now but they will eventually go away.
1520 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
1521 completely replaces the old ASN1 functionality with a table driven
1522 encoder and decoder which interprets an ASN1_ITEM structure describing
1523 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
1524 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
1525 has also been converted to the new form.
1528 *) Change BN_mod_exp_recp so that negative moduli are tolerated
1529 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
1530 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
1531 for negative moduli.
1534 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
1535 of not touching the result's sign bit.
1538 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
1542 *) Changed the LHASH code to use prototypes for callbacks, and created
1543 macros to declare and implement thin (optionally static) functions
1544 that provide type-safety and avoid function pointer casting for the
1545 type-specific callbacks.
1548 *) Added Kerberos Cipher Suites to be used with TLS, as written in
1550 [Veers Staats <staatsvr@asc.hpc.mil>,
1551 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
1553 *) Reformat the FAQ so the different questions and answers can be divided
1554 in sections depending on the subject.
1557 *) Have the zlib compression code load ZLIB.DLL dynamically under
1561 *) New function BN_mod_sqrt for computing square roots modulo a prime
1562 (using the probabilistic Tonelli-Shanks algorithm unless
1563 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
1564 be handled deterministically).
1565 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
1567 *) Make BN_mod_inverse faster by explicitly handling small quotients
1568 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
1569 512 bits], about 30% for larger ones [1024 or 2048 bits].)
1572 *) New function BN_kronecker.
1575 *) Fix BN_gcd so that it works on negative inputs; the result is
1576 positive unless both parameters are zero.
1577 Previously something reasonably close to an infinite loop was
1578 possible because numbers could be growing instead of shrinking
1579 in the implementation of Euclid's algorithm.
1582 *) Fix BN_is_word() and BN_is_one() macros to take into account the
1583 sign of the number in question.
1585 Fix BN_is_word(a,w) to work correctly for w == 0.
1587 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
1588 because its test if the absolute value of 'a' equals 'w'.
1589 Note that BN_abs_is_word does *not* handle w == 0 reliably;
1590 it exists mostly for use in the implementations of BN_is_zero(),
1591 BN_is_one(), and BN_is_word().
1594 *) New function BN_swap.
1597 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
1598 the exponentiation functions are more likely to produce reasonable
1599 results on negative inputs.
1602 *) Change BN_mod_mul so that the result is always non-negative.
1603 Previously, it could be negative if one of the factors was negative;
1604 I don't think anyone really wanted that behaviour.
1607 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
1608 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
1609 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
1610 and add new functions:
1619 BN_mod_lshift1_quick
1623 These functions always generate non-negative results.
1625 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
1626 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
1628 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
1629 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
1630 be reduced modulo m.
1631 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
1633 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
1634 was actually never needed) and in BN_mul(). The removal in BN_mul()
1635 required a small change in bn_mul_part_recursive() and the addition
1636 of the functions bn_cmp_part_words(), bn_sub_part_words() and
1637 bn_add_part_words(), which do the same thing as bn_cmp_words(),
1638 bn_sub_words() and bn_add_words() except they take arrays with
1642 *) In 'openssl passwd', verify passwords read from the terminal
1643 unless the '-salt' option is used (which usually means that
1644 verification would just waste user's time since the resulting
1645 hash is going to be compared with some given password hash)
1646 or the new '-noverify' option is used.
1648 This is an incompatible change, but it does not affect
1649 non-interactive use of 'openssl passwd' (passwords on the command
1650 line, '-stdin' option, '-in ...' option) and thus should not
1654 *) Remove all references to RSAref, since there's no more need for it.
1657 *) Make DSO load along a path given through an environment variable
1658 (SHLIB_PATH) with shl_load().
1661 *) Constify the ENGINE code as a result of BIGNUM constification.
1662 Also constify the RSA code and most things related to it. In a
1663 few places, most notable in the depth of the ASN.1 code, ugly
1664 casts back to non-const were required (to be solved at a later
1668 *) Make it so the openssl application has all engines loaded by default.
1671 *) Constify the BIGNUM routines a little more.
1674 *) Add the following functions:
1676 ENGINE_load_cswift()
1678 ENGINE_load_atalla()
1680 ENGINE_load_builtin_engines()
1682 That way, an application can itself choose if external engines that
1683 are built-in in OpenSSL shall ever be used or not. The benefit is
1684 that applications won't have to be linked with libdl or other dso
1685 libraries unless it's really needed.
1687 Changed 'openssl engine' to load all engines on demand.
1688 Changed the engine header files to avoid the duplication of some
1689 declarations (they differed!).
1692 *) 'openssl engine' can now list capabilities.
1695 *) Better error reporting in 'openssl engine'.
1698 *) Never call load_dh_param(NULL) in s_server.
1701 *) Add engine application. It can currently list engines by name and
1702 identity, and test if they are actually available.
1705 *) Improve RPM specification file by forcing symbolic linking and making
1706 sure the installed documentation is also owned by root.root.
1707 [Damien Miller <djm@mindrot.org>]
1709 *) Give the OpenSSL applications more possibilities to make use of
1710 keys (public as well as private) handled by engines.
1713 *) Add OCSP code that comes from CertCo.
1716 *) Add VMS support for the Rijndael code.
1719 *) Added untested support for Nuron crypto accelerator.
1722 *) Add support for external cryptographic devices. This code was
1723 previously distributed separately as the "engine" branch.
1724 [Geoff Thorpe, Richard Levitte]
1726 *) Rework the filename-translation in the DSO code. It is now possible to
1727 have far greater control over how a "name" is turned into a filename
1728 depending on the operating environment and any oddities about the
1729 different shared library filenames on each system.
1732 *) Support threads on FreeBSD-elf in Configure.
1735 *) Fix for SHA1 assembly problem with MASM: it produces
1736 warnings about corrupt line number information when assembling
1737 with debugging information. This is caused by the overlapping
1739 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
1742 NCONF_get_number() has no error checking at all. As a replacement,
1743 NCONF_get_number_e() is defined (_e for "error checking") and is
1744 promoted strongly. The old NCONF_get_number is kept around for
1745 binary backward compatibility.
1746 Make it possible for methods to load from something other than a BIO,
1747 by providing a function pointer that is given a name instead of a BIO.
1748 For example, this could be used to load configuration data from an
1752 *) Fix for non blocking accept BIOs. Added new I/O special reason
1753 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
1754 with non blocking I/O was not possible because no retry code was
1755 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
1759 *) Added the beginnings of Rijndael support.
1762 *) Fix for bug in DirectoryString mask setting. Add support for
1763 X509_NAME_print_ex() in 'req' and X509_print_ex() function
1764 to allow certificate printing to more controllable, additional
1765 'certopt' option to 'x509' to allow new printing options to be
1769 *) Clean old EAY MD5 hack from e_os.h.
1772 Changes between 0.9.6g and 0.9.6h [xx XXX xxxx]
1774 *) Change the default configuration reader to deal with last line not
1775 being properly terminated.
1778 *) Change X509_NAME_cmp() so it applies the special rules on handling
1779 DN values that are of type PrintableString, as well as RDNs of type
1780 emailAddress where the value has the type ia5String.
1781 [stefank@valicert.com via Richard Levitte]
1783 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
1784 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
1785 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
1786 the bitwise-OR of the two for use by the majority of applications
1787 wanting this behaviour, and update the docs. The documented
1788 behaviour and actual behaviour were inconsistent and had been
1789 changing anyway, so this is more a bug-fix than a behavioural
1791 [Geoff Thorpe, diagnosed by Nadav Har'El]
1793 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
1794 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
1797 *) Fix initialization code race conditions in
1798 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
1799 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
1800 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
1801 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
1802 ssl2_get_cipher_by_char(),
1803 ssl3_get_cipher_by_char().
1804 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
1806 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
1807 the cached sessions are flushed, as the remove_cb() might use ex_data
1808 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
1809 (see [openssl.org #212]).
1810 [Geoff Thorpe, Lutz Jaenicke]
1812 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
1813 length, instead of the encoding length to d2i_ASN1_OBJECT.
1816 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
1818 *) [In 0.9.6g-engine release:]
1819 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
1820 [Lynn Gazis <lgazis@rainbow.com>]
1822 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
1824 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
1825 and get fix the header length calculation.
1826 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
1827 Alon Kantor <alonk@checkpoint.com> (and others),
1830 *) Use proper error handling instead of 'assertions' in buffer
1831 overflow checks added in 0.9.6e. This prevents DoS (the
1832 assertions could call abort()).
1833 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
1835 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
1837 *) Add various sanity checks to asn1_get_length() to reject
1838 the ASN1 length bytes if they exceed sizeof(long), will appear
1839 negative or the content length exceeds the length of the
1841 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
1843 *) Fix cipher selection routines: ciphers without encryption had no flags
1844 for the cipher strength set and where therefore not handled correctly
1845 by the selection routines (PR #130).
1848 *) Fix EVP_dsa_sha macro.
1852 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
1853 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
1854 that was added in OpenSSL 0.9.6d.
1856 As the countermeasure turned out to be incompatible with some
1857 broken SSL implementations, the new option is part of SSL_OP_ALL.
1858 SSL_OP_ALL is usually employed when compatibility with weird SSL
1859 implementations is desired (e.g. '-bugs' option to 's_client' and
1860 's_server'), so the new option is automatically set in many
1864 *) Changes in security patch:
1866 Changes marked "(CHATS)" were sponsored by the Defense Advanced
1867 Research Projects Agency (DARPA) and Air Force Research Laboratory,
1868 Air Force Materiel Command, USAF, under agreement number
1871 *) Add various sanity checks to asn1_get_length() to reject
1872 the ASN1 length bytes if they exceed sizeof(long), will appear
1873 negative or the content length exceeds the length of the
1874 supplied buffer. (CAN-2002-0659)
1875 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
1877 *) Assertions for various potential buffer overflows, not known to
1879 [Ben Laurie (CHATS)]
1881 *) Various temporary buffers to hold ASCII versions of integers were
1882 too small for 64 bit platforms. (CAN-2002-0655)
1883 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
1885 *) Remote buffer overflow in SSL3 protocol - an attacker could
1886 supply an oversized session ID to a client. (CAN-2002-0656)
1887 [Ben Laurie (CHATS)]
1889 *) Remote buffer overflow in SSL2 protocol - an attacker could
1890 supply an oversized client master key. (CAN-2002-0656)
1891 [Ben Laurie (CHATS)]
1893 Changes between 0.9.6c and 0.9.6d [9 May 2002]
1895 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
1896 encoded as NULL) with id-dsa-with-sha1.
1897 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
1899 *) Check various X509_...() return values in apps/req.c.
1900 [Nils Larsch <nla@trustcenter.de>]
1902 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
1903 an end-of-file condition would erronously be flagged, when the CRLF
1904 was just at the end of a processed block. The bug was discovered when
1905 processing data through a buffering memory BIO handing the data to a
1906 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
1907 <ptsekov@syntrex.com> and Nedelcho Stanev.
1910 *) Implement a countermeasure against a vulnerability recently found
1911 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
1912 before application data chunks to avoid the use of known IVs
1913 with data potentially chosen by the attacker.
1916 *) Fix length checks in ssl3_get_client_hello().
1919 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
1920 to prevent ssl3_read_internal() from incorrectly assuming that
1921 ssl3_read_bytes() found application data while handshake
1922 processing was enabled when in fact s->s3->in_read_app_data was
1923 merely automatically cleared during the initial handshake.
1924 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
1926 *) Fix object definitions for Private and Enterprise: they were not
1927 recognized in their shortname (=lowercase) representation. Extend
1928 obj_dat.pl to issue an error when using undefined keywords instead
1929 of silently ignoring the problem (Svenning Sorensen
1930 <sss@sss.dnsalias.net>).
1933 *) Fix DH_generate_parameters() so that it works for 'non-standard'
1934 generators, i.e. generators other than 2 and 5. (Previously, the
1935 code did not properly initialise the 'add' and 'rem' values to
1936 BN_generate_prime().)
1938 In the new general case, we do not insist that 'generator' is
1939 actually a primitive root: This requirement is rather pointless;
1940 a generator of the order-q subgroup is just as good, if not
1944 *) Map new X509 verification errors to alerts. Discovered and submitted by
1945 Tom Wu <tom@arcot.com>.
1948 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
1949 returning non-zero before the data has been completely received
1950 when using non-blocking I/O.
1951 [Bodo Moeller; problem pointed out by John Hughes]
1953 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
1954 [Ben Laurie, Lutz Jaenicke]
1956 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
1957 Yoram Zahavi <YoramZ@gilian.com>).
1960 *) Add information about CygWin 1.3 and on, and preserve proper
1961 configuration for the versions before that.
1962 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
1964 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
1965 check whether we deal with a copy of a session and do not delete from
1966 the cache in this case. Problem reported by "Izhar Shoshani Levi"
1967 <izhar@checkpoint.com>.
1970 *) Do not store session data into the internal session cache, if it
1971 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
1972 flag is set). Proposed by Aslam <aslam@funk.com>.
1975 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
1979 *) [In 0.9.6d-engine release:]
1980 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
1981 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
1983 *) Add the configuration target linux-s390x.
1984 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
1986 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
1987 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
1988 variable as an indication that a ClientHello message has been
1989 received. As the flag value will be lost between multiple
1990 invocations of ssl3_accept when using non-blocking I/O, the
1991 function may not be aware that a handshake has actually taken
1992 place, thus preventing a new session from being added to the
1995 To avoid this problem, we now set s->new_session to 2 instead of
1996 using a local variable.
1997 [Lutz Jaenicke, Bodo Moeller]
1999 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
2000 if the SSL_R_LENGTH_MISMATCH error is detected.
2001 [Geoff Thorpe, Bodo Moeller]
2003 *) New 'shared_ldflag' column in Configure platform table.
2006 *) Fix EVP_CIPHER_mode macro.
2007 ["Dan S. Camper" <dan@bti.net>]
2009 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
2010 type, we must throw them away by setting rr->length to 0.
2011 [D P Chang <dpc@qualys.com>]
2013 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
2015 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
2016 <Dominikus.Scherkl@biodata.com>. (The previous implementation
2017 worked incorrectly for those cases where range = 10..._2 and
2018 3*range is two bits longer than range.)
2021 *) Only add signing time to PKCS7 structures if it is not already
2025 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
2026 OBJ_ld_ce should be OBJ_id_ce.
2027 Also some ip-pda OIDs in crypto/objects/objects.txt were
2028 incorrect (cf. RFC 3039).
2029 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
2031 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
2032 returns early because it has nothing to do.
2033 [Andy Schneider <andy.schneider@bjss.co.uk>]
2035 *) [In 0.9.6c-engine release:]
2036 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
2037 [Andy Schneider <andy.schneider@bjss.co.uk>]
2039 *) [In 0.9.6c-engine release:]
2040 Add support for Cryptographic Appliance's keyserver technology.
2041 (Use engine 'keyclient')
2042 [Cryptographic Appliances and Geoff Thorpe]
2044 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
2045 is called via tools/c89.sh because arguments have to be
2046 rearranged (all '-L' options must appear before the first object
2048 [Richard Shapiro <rshapiro@abinitio.com>]
2050 *) [In 0.9.6c-engine release:]
2051 Add support for Broadcom crypto accelerator cards, backported
2053 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
2055 *) [In 0.9.6c-engine release:]
2056 Add support for SureWare crypto accelerator cards from
2057 Baltimore Technologies. (Use engine 'sureware')
2058 [Baltimore Technologies and Mark Cox]
2060 *) [In 0.9.6c-engine release:]
2061 Add support for crypto accelerator cards from Accelerated
2062 Encryption Processing, www.aep.ie. (Use engine 'aep')
2063 [AEP Inc. and Mark Cox]
2065 *) Add a configuration entry for gcc on UnixWare.
2066 [Gary Benson <gbenson@redhat.com>]
2068 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
2069 messages are stored in a single piece (fixed-length part and
2070 variable-length part combined) and fix various bugs found on the way.
2073 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
2074 instead. BIO_gethostbyname() does not know what timeouts are
2075 appropriate, so entries would stay in cache even when they have
2077 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
2079 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
2080 faced with a pathologically small ClientHello fragment that does
2081 not contain client_version: Instead of aborting with an error,
2082 simply choose the highest available protocol version (i.e.,
2083 TLS 1.0 unless it is disabled). In practice, ClientHello
2084 messages are never sent like this, but this change gives us
2085 strictly correct behaviour at least for TLS.
2088 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
2089 never resets s->method to s->ctx->method when called from within
2090 one of the SSL handshake functions.
2091 [Bodo Moeller; problem pointed out by Niko Baric]
2093 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
2094 (sent using the client's version number) if client_version is
2095 smaller than the protocol version in use. Also change
2096 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
2097 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
2098 the client will at least see that alert.
2101 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
2105 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
2106 client receives HelloRequest while in a handshake.
2107 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
2109 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
2110 should end in 'break', not 'goto end' which circuments various
2111 cleanups done in state SSL_ST_OK. But session related stuff
2112 must be disabled for SSL_ST_OK in the case that we just sent a
2115 Also avoid some overhead by not calling ssl_init_wbio_buffer()
2116 before just sending a HelloRequest.
2117 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
2119 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
2120 reveal whether illegal block cipher padding was found or a MAC
2121 verification error occured. (Neither SSLerr() codes nor alerts
2122 are directly visible to potential attackers, but the information
2123 may leak via logfiles.)
2125 Similar changes are not required for the SSL 2.0 implementation
2126 because the number of padding bytes is sent in clear for SSL 2.0,
2127 and the extra bytes are just ignored. However ssl/s2_pkt.c
2128 failed to verify that the purported number of padding bytes is in
2132 *) Add OpenUNIX-8 support including shared libraries
2133 (Boyd Lynn Gerber <gerberb@zenez.com>).
2136 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
2137 'wristwatch attack' using huge encoding parameters (cf.
2138 James H. Manger's CRYPTO 2001 paper). Note that the
2139 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
2140 encoding parameters and hence was not vulnerable.
2143 *) BN_sqr() bug fix.
2144 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
2146 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
2147 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
2148 followed by modular reduction.
2149 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
2151 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
2152 equivalent based on BN_pseudo_rand() instead of BN_rand().
2155 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
2156 This function was broken, as the check for a new client hello message
2157 to handle SGC did not allow these large messages.
2158 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
2161 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
2164 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
2165 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
2168 *) Rework the configuration and shared library support for Tru64 Unix.
2169 The configuration part makes use of modern compiler features and
2170 still retains old compiler behavior for those that run older versions
2171 of the OS. The shared library support part includes a variant that
2172 uses the RPATH feature, and is available through the special
2173 configuration target "alpha-cc-rpath", which will never be selected
2175 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
2177 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
2178 with the same message size as in ssl3_get_certificate_request().
2179 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
2180 messages might inadvertently be reject as too long.
2181 [Petr Lampa <lampa@fee.vutbr.cz>]
2183 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
2186 *) Modified SSL library such that the verify_callback that has been set
2187 specificly for an SSL object with SSL_set_verify() is actually being
2188 used. Before the change, a verify_callback set with this function was
2189 ignored and the verify_callback() set in the SSL_CTX at the time of
2190 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
2191 to allow the necessary settings.
2194 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
2195 explicitly to NULL, as at least on Solaris 8 this seems not always to be
2196 done automatically (in contradiction to the requirements of the C
2197 standard). This made problems when used from OpenSSH.
2200 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
2201 dh->length and always used
2203 BN_rand_range(priv_key, dh->p).
2205 BN_rand_range() is not necessary for Diffie-Hellman, and this
2206 specific range makes Diffie-Hellman unnecessarily inefficient if
2207 dh->length (recommended exponent length) is much smaller than the
2208 length of dh->p. We could use BN_rand_range() if the order of
2209 the subgroup was stored in the DH structure, but we only have
2214 BN_rand(priv_key, l, ...)
2216 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
2222 RSA_eay_public_encrypt
2223 RSA_eay_private_decrypt
2224 RSA_eay_private_encrypt (signing)
2225 RSA_eay_public_decrypt (signature verification)
2227 (default implementations for RSA_public_encrypt,
2228 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
2229 always reject numbers >= n.
2232 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
2233 to synchronize access to 'locking_thread'. This is necessary on
2234 systems where access to 'locking_thread' (an 'unsigned long'
2235 variable) is not atomic.
2238 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
2239 *before* setting the 'crypto_lock_rand' flag. The previous code had
2240 a race condition if 0 is a valid thread ID.
2241 [Travis Vitek <vitek@roguewave.com>]
2243 *) Add support for shared libraries under Irix.
2244 [Albert Chin-A-Young <china@thewrittenword.com>]
2246 *) Add configuration option to build on Linux on both big-endian and
2248 [Ralf Baechle <ralf@uni-koblenz.de>]
2250 *) Add the possibility to create shared libraries on HP-UX.
2253 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
2255 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
2256 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
2257 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
2258 PRNG state recovery was possible based on the output of
2259 one PRNG request appropriately sized to gain knowledge on
2260 'md' followed by enough consecutive 1-byte PRNG requests
2261 to traverse all of 'state'.
2263 1. When updating 'md_local' (the current thread's copy of 'md')
2264 during PRNG output generation, hash all of the previous
2265 'md_local' value, not just the half used for PRNG output.
2267 2. Make the number of bytes from 'state' included into the hash
2268 independent from the number of PRNG bytes requested.
2270 The first measure alone would be sufficient to avoid
2271 Markku-Juhani's attack. (Actually it had never occurred
2272 to me that the half of 'md_local' used for chaining was the
2273 half from which PRNG output bytes were taken -- I had always
2274 assumed that the secret half would be used.) The second
2275 measure makes sure that additional data from 'state' is never
2276 mixed into 'md_local' in small portions; this heuristically
2277 further strengthens the PRNG.
2280 *) Fix crypto/bn/asm/mips3.s.
2283 *) When only the key is given to "enc", the IV is undefined. Print out
2284 an error message in this case.
2287 *) Handle special case when X509_NAME is empty in X509 printing routines.
2290 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
2291 positive and less than q.
2294 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
2295 used: it isn't thread safe and the add_lock_callback should handle
2297 [Paul Rose <Paul.Rose@bridge.com>]
2299 *) Verify that incoming data obeys the block size in
2300 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
2304 [Ulf Möller, Bodo Möller]
2306 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
2307 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
2308 when fixing the server behaviour for backwards-compatible 'client
2309 hello' messages. (Note that the attack is impractical against
2310 SSL 3.0 and TLS 1.0 anyway because length and version checking
2311 means that the probability of guessing a valid ciphertext is
2312 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
2315 Before 0.9.5, the countermeasure (hide the error by generating a
2316 random 'decryption result') did not work properly because
2317 ERR_clear_error() was missing, meaning that SSL_get_error() would
2318 detect the supposedly ignored error.
2320 Both problems are now fixed.
2323 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
2324 (previously it was 1024).
2327 *) Fix for compatibility mode trust settings: ignore trust settings
2328 unless some valid trust or reject settings are present.
2331 *) Fix for blowfish EVP: its a variable length cipher.
2334 *) Fix various bugs related to DSA S/MIME verification. Handle missing
2335 parameters in DSA public key structures and return an error in the
2336 DSA routines if parameters are absent.
2339 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
2340 in the current directory if neither $RANDFILE nor $HOME was set.
2341 RAND_file_name() in 0.9.6a returned NULL in this case. This has
2342 caused some confusion to Windows users who haven't defined $HOME.
2343 Thus RAND_file_name() is changed again: e_os.h can define a
2344 DEFAULT_HOME, which will be used if $HOME is not set.
2345 For Windows, we use "C:"; on other platforms, we still require
2346 environment variables.
2348 *) Move 'if (!initialized) RAND_poll()' into regions protected by
2349 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
2350 having multiple threads call RAND_poll() concurrently.
2353 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
2354 combination of a flag and a thread ID variable.
2355 Otherwise while one thread is in ssleay_rand_bytes (which sets the
2356 flag), *other* threads can enter ssleay_add_bytes without obeying
2357 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
2358 that they do not hold after the first thread unsets add_do_not_lock).
2361 *) Change bctest again: '-x' expressions are not available in all
2365 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
2367 *) Fix a couple of memory leaks in PKCS7_dataDecode()
2368 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
2370 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
2371 the default extension for executables, if any. Also, make the perl
2372 scripts that use symlink() to test if it really exists and use "cp"
2373 if it doesn't. All this made OpenSSL compilable and installable in
2377 *) Fix for asn1_GetSequence() for indefinite length constructed data.
2378 If SEQUENCE is length is indefinite just set c->slen to the total
2379 amount of data available.
2380 [Steve Henson, reported by shige@FreeBSD.org]
2381 [This change does not apply to 0.9.7.]
2383 *) Change bctest to avoid here-documents inside command substitution
2384 (workaround for FreeBSD /bin/sh bug).
2385 For compatibility with Ultrix, avoid shell functions (introduced
2386 in the bctest version that searches along $PATH).
2389 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
2390 with des_encrypt() defined on some operating systems, like Solaris
2394 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
2395 On the Importance of Eliminating Errors in Cryptographic
2396 Computations, J. Cryptology 14 (2001) 2, 101-119,
2397 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
2400 *) MIPS assembler BIGNUM division bug fix.
2403 *) Disabled incorrect Alpha assembler code.
2406 *) Fix PKCS#7 decode routines so they correctly update the length
2407 after reading an EOC for the EXPLICIT tag.
2409 [This change does not apply to 0.9.7.]
2411 *) Fix bug in PKCS#12 key generation routines. This was triggered
2412 if a 3DES key was generated with a 0 initial byte. Include
2413 PKCS12_BROKEN_KEYGEN compilation option to retain the old
2414 (but broken) behaviour.
2417 *) Enhance bctest to search for a working bc along $PATH and print
2419 [Tim Rice <tim@multitalents.net> via Richard Levitte]
2421 *) Fix memory leaks in err.c: free err_data string if necessary;
2422 don't write to the wrong index in ERR_set_error_data.
2425 *) Implement ssl23_peek (analogous to ssl23_read), which previously
2429 *) Replace rdtsc with _emit statements for VC++ version 5.
2430 [Jeremy Cooper <jeremy@baymoo.org>]
2432 *) Make it possible to reuse SSLv2 sessions.
2435 *) In copy_email() check for >= 0 as a return value for
2436 X509_NAME_get_index_by_NID() since 0 is a valid index.
2437 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
2439 *) Avoid coredump with unsupported or invalid public keys by checking if
2440 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
2441 PKCS7_verify() fails with non detached data.
2444 *) Don't use getenv in library functions when run as setuid/setgid.
2445 New function OPENSSL_issetugid().
2448 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
2449 due to incorrect handling of multi-threading:
2451 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
2453 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
2455 3. Count how many times MemCheck_off() has been called so that
2456 nested use can be treated correctly. This also avoids
2457 inband-signalling in the previous code (which relied on the
2458 assumption that thread ID 0 is impossible).
2461 *) Add "-rand" option also to s_client and s_server.
2464 *) Fix CPU detection on Irix 6.x.
2465 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
2466 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
2468 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
2471 [This change does not apply to 0.9.7.]
2473 *) Use the cached encoding of an X509_NAME structure rather than
2474 copying it. This is apparently the reason for the libsafe "errors"
2475 but the code is actually correct.
2478 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
2479 Bleichenbacher's DSA attack.
2480 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
2481 to be set and top=0 forces the highest bit to be set; top=-1 is new
2482 and leaves the highest bit random.
2483 [Ulf Moeller, Bodo Moeller]
2485 *) In the NCONF_...-based implementations for CONF_... queries
2486 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
2487 a temporary CONF structure with the data component set to NULL
2488 (which gives segmentation faults in lh_retrieve).
2489 Instead, use NULL for the CONF pointer in CONF_get_string and
2490 CONF_get_number (which may use environment variables) and directly
2491 return NULL from CONF_get_section.
2494 *) Fix potential buffer overrun for EBCDIC.
2497 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
2498 keyUsage if basicConstraints absent for a CA.
2501 *) Make SMIME_write_PKCS7() write mail header values with a format that
2502 is more generally accepted (no spaces before the semicolon), since
2503 some programs can't parse those values properly otherwise. Also make
2504 sure BIO's that break lines after each write do not create invalid
2508 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
2509 macros previously used would not encode an empty SEQUENCE OF
2510 and break the signature.
2512 [This change does not apply to 0.9.7.]
2514 *) Zero the premaster secret after deriving the master secret in
2518 *) Add some EVP_add_digest_alias registrations (as found in
2519 OpenSSL_add_all_digests()) to SSL_library_init()
2520 aka OpenSSL_add_ssl_algorithms(). This provides improved
2521 compatibility with peers using X.509 certificates
2522 with unconventional AlgorithmIdentifier OIDs.
2525 *) Fix for Irix with NO_ASM.
2526 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
2528 *) ./config script fixes.
2529 [Ulf Moeller, Richard Levitte]
2531 *) Fix 'openssl passwd -1'.
2534 *) Change PKCS12_key_gen_asc() so it can cope with non null
2535 terminated strings whose length is passed in the passlen
2536 parameter, for example from PEM callbacks. This was done
2537 by adding an extra length parameter to asc2uni().
2538 [Steve Henson, reported by <oddissey@samsung.co.kr>]
2540 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
2541 call failed, free the DSA structure.
2544 *) Fix to uni2asc() to cope with zero length Unicode strings.
2545 These are present in some PKCS#12 files.
2548 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
2549 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
2550 when writing a 32767 byte record.
2551 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
2553 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
2554 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
2556 (RSA objects have a reference count access to which is protected
2557 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
2558 so they are meant to be shared between threads.)
2559 [Bodo Moeller, Geoff Thorpe; original patch submitted by
2560 "Reddie, Steven" <Steven.Reddie@ca.com>]
2562 *) Fix a deadlock in CRYPTO_mem_leaks().
2565 *) Use better test patterns in bntest.
2568 *) rand_win.c fix for Borland C.
2571 *) BN_rshift bugfix for n == 0.
2574 *) Add a 'bctest' script that checks for some known 'bc' bugs
2575 so that 'make test' does not abort just because 'bc' is broken.
2578 *) Store verify_result within SSL_SESSION also for client side to
2579 avoid potential security hole. (Re-used sessions on the client side
2580 always resulted in verify_result==X509_V_OK, not using the original
2581 result of the server certificate verification.)
2584 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
2585 SSL3_RT_APPLICATION_DATA, return 0.
2586 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
2590 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
2591 releases, have been re-implemented by renaming the previous
2592 implementations of ssl2_read and ssl3_read to ssl2_read_internal
2593 and ssl3_read_internal, respectively, and adding 'peek' parameters
2594 to them. The new ssl[23]_{read,peek} functions are calls to
2595 ssl[23]_read_internal with the 'peek' flag set appropriately.
2596 A 'peek' parameter has also been added to ssl3_read_bytes, which
2597 does the actual work for ssl3_read_internal.
2600 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
2601 the method-specific "init()" handler. Also clean up ex_data after
2602 calling the method-specific "finish()" handler. Previously, this was
2603 happening the other way round.
2606 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
2607 The previous value, 12, was not always sufficient for BN_mod_exp().
2610 *) Make sure that shared libraries get the internal name engine with
2611 the full version number and not just 0. This should mark the
2612 shared libraries as not backward compatible. Of course, this should
2613 be changed again when we can guarantee backward binary compatibility.
2616 *) Fix typo in get_cert_by_subject() in by_dir.c
2617 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
2619 *) Rework the system to generate shared libraries:
2621 - Make note of the expected extension for the shared libraries and
2622 if there is a need for symbolic links from for example libcrypto.so.0
2623 to libcrypto.so.0.9.7. There is extended info in Configure for
2626 - Make as few rebuilds of the shared libraries as possible.
2628 - Still avoid linking the OpenSSL programs with the shared libraries.
2630 - When installing, install the shared libraries separately from the
2634 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
2636 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
2637 and not in SSL_clear because the latter is also used by the
2638 accept/connect functions; previously, the settings made by
2639 SSL_set_read_ahead would be lost during the handshake.
2640 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
2642 *) Correct util/mkdef.pl to be selective about disabled algorithms.
2643 Previously, it would create entries for disableed algorithms no
2647 *) Added several new manual pages for SSL_* function.
2650 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
2652 *) In ssl23_get_client_hello, generate an error message when faced
2653 with an initial SSL 3.0/TLS record that is too small to contain the
2654 first two bytes of the ClientHello message, i.e. client_version.
2655 (Note that this is a pathologic case that probably has never happened
2656 in real life.) The previous approach was to use the version number
2657 from the record header as a substitute; but our protocol choice
2658 should not depend on that one because it is not authenticated
2659 by the Finished messages.
2662 *) More robust randomness gathering functions for Windows.
2663 [Jeffrey Altman <jaltman@columbia.edu>]
2665 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
2666 not set then we don't setup the error code for issuer check errors
2667 to avoid possibly overwriting other errors which the callback does
2668 handle. If an application does set the flag then we assume it knows
2669 what it is doing and can handle the new informational codes
2673 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
2674 a general "ANY" type, as such it should be able to decode anything
2675 including tagged types. However it didn't check the class so it would
2676 wrongly interpret tagged types in the same way as their universal
2677 counterpart and unknown types were just rejected. Changed so that the
2678 tagged and unknown types are handled in the same way as a SEQUENCE:
2679 that is the encoding is stored intact. There is also a new type
2680 "V_ASN1_OTHER" which is used when the class is not universal, in this
2681 case we have no idea what the actual type is so we just lump them all
2685 *) On VMS, stdout may very well lead to a file that is written to
2686 in a record-oriented fashion. That means that every write() will
2687 write a separate record, which will be read separately by the
2688 programs trying to read from it. This can be very confusing.
2690 The solution is to put a BIO filter in the way that will buffer
2691 text until a linefeed is reached, and then write everything a
2692 line at a time, so every record written will be an actual line,
2693 not chunks of lines and not (usually doesn't happen, but I've
2694 seen it once) several lines in one record. BIO_f_linebuffer() is
2697 Currently, it's a VMS-only method, because that's where it has
2698 been tested well enough.
2701 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
2702 it can return incorrect results.
2703 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
2704 but it was in 0.9.6-beta[12].)
2707 *) Disable the check for content being present when verifying detached
2708 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
2709 include zero length content when signing messages.
2712 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
2713 BIO_ctrl (for BIO pairs).
2716 *) Add DSO method for VMS.
2719 *) Bug fix: Montgomery multiplication could produce results with the
2723 *) Add RPM specification openssl.spec and modify it to build three
2724 packages. The default package contains applications, application
2725 documentation and run-time libraries. The devel package contains
2726 include files, static libraries and function documentation. The
2727 doc package contains the contents of the doc directory. The original
2728 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
2731 *) Add a large number of documentation files for many SSL routines.
2732 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
2734 *) Add a configuration entry for Sony News 4.
2735 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
2737 *) Don't set the two most significant bits to one when generating a
2738 random number < q in the DSA library.
2741 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
2742 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
2743 the underlying transport is blocking) if a handshake took place.
2744 (The default behaviour is needed by applications such as s_client
2745 and s_server that use select() to determine when to use SSL_read;
2746 but for applications that know in advance when to expect data, it
2747 just makes things more complicated.)
2750 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
2754 *) Add a few more EBCDIC conditionals that make `req' and `x509'
2755 work better on such systems.
2756 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
2758 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
2759 Update PKCS12_parse() so it copies the friendlyName and the
2760 keyid to the certificates aux info.
2763 *) Fix bug in PKCS7_verify() which caused an infinite loop
2764 if there was more than one signature.
2765 [Sven Uszpelkat <su@celocom.de>]
2767 *) Major change in util/mkdef.pl to include extra information
2768 about each symbol, as well as presentig variables as well
2769 as functions. This change means that there's n more need
2770 to rebuild the .num files when some algorithms are excluded.
2773 *) Allow the verify time to be set by an application,
2774 rather than always using the current time.
2777 *) Phase 2 verify code reorganisation. The certificate
2778 verify code now looks up an issuer certificate by a
2779 number of criteria: subject name, authority key id
2780 and key usage. It also verifies self signed certificates
2781 by the same criteria. The main comparison function is
2782 X509_check_issued() which performs these checks.
2784 Lot of changes were necessary in order to support this
2785 without completely rewriting the lookup code.
2787 Authority and subject key identifier are now cached.
2789 The LHASH 'certs' is X509_STORE has now been replaced
2790 by a STACK_OF(X509_OBJECT). This is mainly because an
2791 LHASH can't store or retrieve multiple objects with
2792 the same hash value.
2794 As a result various functions (which were all internal
2795 use only) have changed to handle the new X509_STORE
2796 structure. This will break anything that messed round
2797 with X509_STORE internally.
2799 The functions X509_STORE_add_cert() now checks for an
2800 exact match, rather than just subject name.
2802 The X509_STORE API doesn't directly support the retrieval
2803 of multiple certificates matching a given criteria, however
2804 this can be worked round by performing a lookup first
2805 (which will fill the cache with candidate certificates)
2806 and then examining the cache for matches. This is probably
2807 the best we can do without throwing out X509_LOOKUP
2808 entirely (maybe later...).
2810 The X509_VERIFY_CTX structure has been enhanced considerably.
2812 All certificate lookup operations now go via a get_issuer()
2813 callback. Although this currently uses an X509_STORE it
2814 can be replaced by custom lookups. This is a simple way
2815 to bypass the X509_STORE hackery necessary to make this
2816 work and makes it possible to use more efficient techniques
2817 in future. A very simple version which uses a simple
2818 STACK for its trusted certificate store is also provided
2819 using X509_STORE_CTX_trusted_stack().
2821 The verify_cb() and verify() callbacks now have equivalents
2822 in the X509_STORE_CTX structure.
2824 X509_STORE_CTX also has a 'flags' field which can be used
2825 to customise the verify behaviour.
2828 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
2829 excludes S/MIME capabilities.
2832 *) When a certificate request is read in keep a copy of the
2833 original encoding of the signed data and use it when outputing
2834 again. Signatures then use the original encoding rather than
2835 a decoded, encoded version which may cause problems if the
2836 request is improperly encoded.
2839 *) For consistency with other BIO_puts implementations, call
2840 buffer_write(b, ...) directly in buffer_puts instead of calling
2843 In BIO_puts, increment b->num_write as in BIO_write.
2844 [Peter.Sylvester@EdelWeb.fr]
2846 *) Fix BN_mul_word for the case where the word is 0. (We have to use
2847 BN_zero, we may not return a BIGNUM with an array consisting of
2851 *) Avoid calling abort() from within the library when problems are
2852 detected, except if preprocessor symbols have been defined
2853 (such as REF_CHECK, BN_DEBUG etc.).
2856 *) New openssl application 'rsautl'. This utility can be
2857 used for low level RSA operations. DER public key
2858 BIO/fp routines also added.
2861 *) New Configure entry and patches for compiling on QNX 4.
2862 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
2864 *) A demo state-machine implementation was sponsored by
2865 Nuron (http://www.nuron.com/) and is now available in
2866 demos/state_machine.
2869 *) New options added to the 'dgst' utility for signature
2870 generation and verification.
2873 *) Unrecognized PKCS#7 content types are now handled via a
2874 catch all ASN1_TYPE structure. This allows unsupported
2875 types to be stored as a "blob" and an application can
2876 encode and decode it manually.
2879 *) Fix various signed/unsigned issues to make a_strex.c
2881 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
2883 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
2884 length if passed a buffer. ASN1_INTEGER_to_BN failed
2885 if passed a NULL BN and its argument was negative.
2886 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
2888 *) Modification to PKCS#7 encoding routines to output definite
2889 length encoding. Since currently the whole structures are in
2890 memory there's not real point in using indefinite length
2891 constructed encoding. However if OpenSSL is compiled with
2892 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
2895 *) Added BIO_vprintf() and BIO_vsnprintf().
2898 *) Added more prefixes to parse for in the the strings written
2899 through a logging bio, to cover all the levels that are available
2900 through syslog. The prefixes are now:
2902 PANIC, EMERG, EMR => LOG_EMERG
2903 ALERT, ALR => LOG_ALERT
2904 CRIT, CRI => LOG_CRIT
2905 ERROR, ERR => LOG_ERR
2906 WARNING, WARN, WAR => LOG_WARNING
2907 NOTICE, NOTE, NOT => LOG_NOTICE
2908 INFO, INF => LOG_INFO
2909 DEBUG, DBG => LOG_DEBUG
2911 and as before, if none of those prefixes are present at the
2912 beginning of the string, LOG_ERR is chosen.
2914 On Win32, the LOG_* levels are mapped according to this:
2916 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
2917 LOG_WARNING => EVENTLOG_WARNING_TYPE
2918 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
2922 *) Made it possible to reconfigure with just the configuration
2923 argument "reconf" or "reconfigure". The command line arguments
2924 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
2925 and are retrieved from there when reconfiguring.
2929 [Assar Westerlund <assar@sics.se>, Richard Levitte]
2931 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
2934 *) The obj_dat.pl script was messing up the sorting of object
2935 names. The reason was that it compared the quoted version
2936 of strings as a result "OCSP" > "OCSP Signing" because
2937 " > SPACE. Changed script to store unquoted versions of
2938 names and add quotes on output. It was also omitting some
2939 names from the lookup table if they were given a default
2940 value (that is if SN is missing it is given the same
2941 value as LN and vice versa), these are now added on the
2942 grounds that if an object has a name we should be able to
2943 look it up. Finally added warning output when duplicate
2944 short or long names are found.
2947 *) Changes needed for Tandem NSK.
2948 [Scott Uroff <scott@xypro.com>]
2950 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
2951 RSA_padding_check_SSLv23(), special padding was never detected
2952 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
2953 version rollback attacks was not effective.
2955 In s23_clnt.c, don't use special rollback-attack detection padding
2956 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
2957 client; similarly, in s23_srvr.c, don't do the rollback check if
2958 SSL 2.0 is the only protocol enabled in the server.
2961 *) Make it possible to get hexdumps of unprintable data with 'openssl
2962 asn1parse'. By implication, the functions ASN1_parse_dump() and
2963 BIO_dump_indent() are added.
2966 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
2967 these print out strings and name structures based on various
2968 flags including RFC2253 support and proper handling of
2969 multibyte characters. Added options to the 'x509' utility
2970 to allow the various flags to be set.
2973 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
2974 Also change the functions X509_cmp_current_time() and
2975 X509_gmtime_adj() work with an ASN1_TIME structure,
2976 this will enable certificates using GeneralizedTime in validity
2977 dates to be checked.
2980 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
2981 negative public key encodings) on by default,
2982 NO_NEG_PUBKEY_BUG can be set to disable it.
2985 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
2986 content octets. An i2c_ASN1_OBJECT is unnecessary because
2987 the encoding can be trivially obtained from the structure.
2990 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
2991 not read locks (CRYPTO_r_[un]lock).
2994 *) A first attempt at creating official support for shared
2995 libraries through configuration. I've kept it so the
2996 default is static libraries only, and the OpenSSL programs
2997 are always statically linked for now, but there are
2998 preparations for dynamic linking in place.
2999 This has been tested on Linux and Tru64.
3002 *) Randomness polling function for Win9x, as described in:
3003 Peter Gutmann, Software Generation of Practically Strong
3007 *) Fix so PRNG is seeded in req if using an already existing
3011 *) New options to smime application. -inform and -outform
3012 allow alternative formats for the S/MIME message including
3013 PEM and DER. The -content option allows the content to be
3014 specified separately. This should allow things like Netscape
3015 form signing output easier to verify.
3018 *) Fix the ASN1 encoding of tags using the 'long form'.
3021 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
3022 STRING types. These convert content octets to and from the
3023 underlying type. The actual tag and length octets are
3024 already assumed to have been read in and checked. These
3025 are needed because all other string types have virtually
3026 identical handling apart from the tag. By having versions
3027 of the ASN1 functions that just operate on content octets
3028 IMPLICIT tagging can be handled properly. It also allows
3029 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
3030 and ASN1_INTEGER are identical apart from the tag.
3033 *) Change the handling of OID objects as follows:
3035 - New object identifiers are inserted in objects.txt, following
3036 the syntax given in objects.README.
3037 - objects.pl is used to process obj_mac.num and create a new
3039 - obj_dat.pl is used to create a new obj_dat.h, using the data in
3042 This is currently kind of a hack, and the perl code in objects.pl
3043 isn't very elegant, but it works as I intended. The simplest way
3044 to check that it worked correctly is to look in obj_dat.h and
3045 check the array nid_objs and make sure the objects haven't moved
3046 around (this is important!). Additions are OK, as well as
3047 consistent name changes.
3050 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
3053 *) Addition of the command line parameter '-rand file' to 'openssl req'.
3054 The given file adds to whatever has already been seeded into the
3055 random pool through the RANDFILE configuration file option or
3056 environment variable, or the default random state file.
3059 *) mkstack.pl now sorts each macro group into lexical order.
3060 Previously the output order depended on the order the files
3061 appeared in the directory, resulting in needless rewriting
3065 *) Patches to make OpenSSL compile under Win32 again. Mostly
3066 work arounds for the VC++ problem that it treats func() as
3067 func(void). Also stripped out the parts of mkdef.pl that
3068 added extra typesafe functions: these no longer exist.
3071 *) Reorganisation of the stack code. The macros are now all
3072 collected in safestack.h . Each macro is defined in terms of
3073 a "stack macro" of the form SKM_<name>(type, a, b). The
3074 DEBUG_SAFESTACK is now handled in terms of function casts,
3075 this has the advantage of retaining type safety without the
3076 use of additional functions. If DEBUG_SAFESTACK is not defined
3077 then the non typesafe macros are used instead. Also modified the
3078 mkstack.pl script to handle the new form. Needs testing to see
3079 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
3080 the default if no major problems. Similar behaviour for ASN1_SET_OF
3081 and PKCS12_STACK_OF.
3084 *) When some versions of IIS use the 'NET' form of private key the
3085 key derivation algorithm is different. Normally MD5(password) is
3086 used as a 128 bit RC4 key. In the modified case
3087 MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
3088 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
3089 as the old Netscape_RSA functions except they have an additional
3090 'sgckey' parameter which uses the modified algorithm. Also added
3091 an -sgckey command line option to the rsa utility. Thanks to
3092 Adrian Peck <bertie@ncipher.com> for posting details of the modified
3093 algorithm to openssl-dev.
3096 *) The evp_local.h macros were using 'c.##kname' which resulted in
3097 invalid expansion on some systems (SCO 5.0.5 for example).
3098 Corrected to 'c.kname'.
3099 [Phillip Porch <root@theporch.com>]
3101 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
3102 a STACK of email addresses from a certificate or request, these look
3103 in the subject name and the subject alternative name extensions and
3104 omit any duplicate addresses.
3107 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
3108 This makes DSA verification about 2 % faster.
3111 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
3112 (meaning that now 2^5 values will be precomputed, which is only 4 KB
3113 plus overhead for 1024 bit moduli).
3114 This makes exponentiations about 0.5 % faster for 1024 bit
3115 exponents (as measured by "openssl speed rsa2048").
3118 *) Rename memory handling macros to avoid conflicts with other
3120 Malloc => OPENSSL_malloc
3121 Malloc_locked => OPENSSL_malloc_locked
3122 Realloc => OPENSSL_realloc
3123 Free => OPENSSL_free
3126 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
3127 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
3130 *) CygWin32 support.
3131 [John Jarvie <jjarvie@newsguy.com>]
3133 *) The type-safe stack code has been rejigged. It is now only compiled
3134 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
3135 by default all type-specific stack functions are "#define"d back to
3136 standard stack functions. This results in more streamlined output
3137 but retains the type-safety checking possibilities of the original
3141 *) The STACK code has been cleaned up, and certain type declarations
3142 that didn't make a lot of sense have been brought in line. This has
3143 also involved a cleanup of sorts in safestack.h to more correctly
3144 map type-safe stack functions onto their plain stack counterparts.
3145 This work has also resulted in a variety of "const"ifications of
3146 lots of the code, especially "_cmp" operations which should normally
3147 be prototyped with "const" parameters anyway.
3150 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
3151 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
3152 (The PRNG state consists of two parts, the large pool 'state' and 'md',
3153 where all of 'md' is used each time the PRNG is used, but 'state'
3154 is used only indexed by a cyclic counter. As entropy may not be
3155 well distributed from the beginning, 'md' is important as a
3156 chaining variable. However, the output function chains only half
3157 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
3158 all of 'md', and seeding with STATE_SIZE dummy bytes will result
3159 in all of 'state' being rewritten, with the new values depending
3160 on virtually all of 'md'. This overcomes the 80 bit limitation.)
3163 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
3164 the handshake is continued after ssl_verify_cert_chain();
3165 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
3166 can lead to 'unexplainable' connection aborts later.
3167 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
3169 *) Major EVP API cipher revision.
3170 Add hooks for extra EVP features. This allows various cipher
3171 parameters to be set in the EVP interface. Support added for variable
3172 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
3173 setting of RC2 and RC5 parameters.
3175 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
3178 Remove lots of duplicated code from the EVP library. For example *every*
3179 cipher init() function handles the 'iv' in the same way according to the
3180 cipher mode. They also all do nothing if the 'key' parameter is NULL and
3181 for CFB and OFB modes they zero ctx->num.
3183 New functionality allows removal of S/MIME code RC2 hack.
3185 Most of the routines have the same form and so can be declared in terms
3188 By shifting this to the top level EVP_CipherInit() it can be removed from
3189 all individual ciphers. If the cipher wants to handle IVs or keys
3190 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
3193 Change lots of functions like EVP_EncryptUpdate() to now return a
3194 value: although software versions of the algorithms cannot fail
3195 any installed hardware versions can.
3198 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
3199 this option is set, tolerate broken clients that send the negotiated
3200 protocol version number instead of the requested protocol version
3204 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
3205 i.e. non-zero for export ciphersuites, zero otherwise.
3206 Previous versions had this flag inverted, inconsistent with
3207 rsa_tmp_cb (..._TMP_RSA_CB).
3208 [Bodo Moeller; problem reported by Amit Chopra]
3210 *) Add missing DSA library text string. Work around for some IIS
3211 key files with invalid SEQUENCE encoding.
3214 *) Add a document (doc/standards.txt) that list all kinds of standards
3215 and so on that are implemented in OpenSSL.
3218 *) Enhance c_rehash script. Old version would mishandle certificates
3219 with the same subject name hash and wouldn't handle CRLs at all.
3220 Added -fingerprint option to crl utility, to support new c_rehash
3224 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
3227 *) Fix for SSL server purpose checking. Server checking was
3228 rejecting certificates which had extended key usage present
3229 but no ssl client purpose.
3230 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
3232 *) Make PKCS#12 code work with no password. The PKCS#12 spec
3233 is a little unclear about how a blank password is handled.
3234 Since the password in encoded as a BMPString with terminating
3235 double NULL a zero length password would end up as just the
3236 double NULL. However no password at all is different and is
3237 handled differently in the PKCS#12 key generation code. NS
3238 treats a blank password as zero length. MSIE treats it as no
3239 password on export: but it will try both on import. We now do
3240 the same: PKCS12_parse() tries zero length and no password if
3241 the password is set to "" or NULL (NULL is now a valid password:
3242 it wasn't before) as does the pkcs12 application.
3245 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
3246 perror when PEM_read_bio_X509_REQ fails, the error message must
3247 be obtained from the error queue.
3250 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
3251 it in ERR_remove_state if appropriate, and change ERR_get_state
3252 accordingly to avoid race conditions (this is necessary because
3253 thread_hash is no longer constant once set).
3256 *) Bugfix for linux-elf makefile.one.
3259 *) RSA_get_default_method() will now cause a default
3260 RSA_METHOD to be chosen if one doesn't exist already.
3261 Previously this was only set during a call to RSA_new()
3262 or RSA_new_method(NULL) meaning it was possible for
3263 RSA_get_default_method() to return NULL.
3266 *) Added native name translation to the existing DSO code
3267 that will convert (if the flag to do so is set) filenames
3268 that are sufficiently small and have no path information
3269 into a canonical native form. Eg. "blah" converted to
3270 "libblah.so" or "blah.dll" etc.
3273 *) New function ERR_error_string_n(e, buf, len) which is like
3274 ERR_error_string(e, buf), but writes at most 'len' bytes
3275 including the 0 terminator. For ERR_error_string_n, 'buf'
3277 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
3279 *) CONF library reworked to become more general. A new CONF
3280 configuration file reader "class" is implemented as well as a
3281 new functions (NCONF_*, for "New CONF") to handle it. The now
3282 old CONF_* functions are still there, but are reimplemented to
3283 work in terms of the new functions. Also, a set of functions
3284 to handle the internal storage of the configuration data is
3285 provided to make it easier to write new configuration file
3286 reader "classes" (I can definitely see something reading a
3287 configuration file in XML format, for example), called _CONF_*,
3288 or "the configuration storage API"...
3290 The new configuration file reading functions are:
3292 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
3293 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
3295 NCONF_default, NCONF_WIN32
3297 NCONF_dump_fp, NCONF_dump_bio
3299 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
3300 NCONF_new creates a new CONF object. This works in the same way
3301 as other interfaces in OpenSSL, like the BIO interface.
3302 NCONF_dump_* dump the internal storage of the configuration file,
3303 which is useful for debugging. All other functions take the same
3304 arguments as the old CONF_* functions wth the exception of the
3305 first that must be a `CONF *' instead of a `LHASH *'.
3307 To make it easer to use the new classes with the old CONF_* functions,
3308 the function CONF_set_default_method is provided.
3311 *) Add '-tls1' option to 'openssl ciphers', which was already
3312 mentioned in the documentation but had not been implemented.
3313 (This option is not yet really useful because even the additional
3314 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
3317 *) Initial DSO code added into libcrypto for letting OpenSSL (and
3318 OpenSSL-based applications) load shared libraries and bind to
3319 them in a portable way.
3320 [Geoff Thorpe, with contributions from Richard Levitte]
3322 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
3324 *) Make sure _lrotl and _lrotr are only used with MSVC.
3326 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
3327 (the default implementation of RAND_status).
3329 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
3330 to '-clrext' (= clear extensions), as intended and documented.
3331 [Bodo Moeller; inconsistency pointed out by Michael Attili
3334 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
3335 was larger than the MD block size.
3336 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
3338 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
3339 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
3340 using the passed key: if the passed key was a private key the result
3341 of X509_print(), for example, would be to print out all the private key
3345 *) des_quad_cksum() byte order bug fix.
3346 [Ulf Möller, using the problem description in krb4-0.9.7, where
3347 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
3349 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
3351 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
3353 *) For easily testing in shell scripts whether some command
3354 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
3355 returns with exit code 0 iff no command of the given name is available.
3356 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
3357 the output goes to stdout and nothing is printed to stderr.
3358 Additional arguments are always ignored.
3360 Since for each cipher there is a command of the same name,
3361 the 'no-cipher' compilation switches can be tested this way.
3363 ('openssl no-XXX' is not able to detect pseudo-commands such
3364 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
3367 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
3370 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
3371 is set; it will be thrown away anyway because each handshake creates
3373 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
3374 to parameters -- in previous versions (since OpenSSL 0.9.3) the
3375 'default key' from SSL_CTX_set_tmp_dh would always be lost, meanining
3376 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
3379 *) New s_client option -ign_eof: EOF at stdin is ignored, and
3380 'Q' and 'R' lose their special meanings (quit/renegotiate).
3381 This is part of what -quiet does; unlike -quiet, -ign_eof
3382 does not suppress any output.
3385 *) Add compatibility options to the purpose and trust code. The
3386 purpose X509_PURPOSE_ANY is "any purpose" which automatically
3387 accepts a certificate or CA, this was the previous behaviour,
3388 with all the associated security issues.
3390 X509_TRUST_COMPAT is the old trust behaviour: only and
3391 automatically trust self signed roots in certificate store. A
3392 new trust setting X509_TRUST_DEFAULT is used to specify that
3393 a purpose has no associated trust setting and it should instead
3394 use the value in the default purpose.
3397 *) Fix the PKCS#8 DSA private key code so it decodes keys again
3398 and fix a memory leak.
3401 *) In util/mkerr.pl (which implements 'make errors'), preserve
3402 reason strings from the previous version of the .c file, as
3403 the default to have only downcase letters (and digits) in
3404 automatically generated reasons codes is not always appropriate.
3407 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
3408 using strerror. Previously, ERR_reason_error_string() returned
3409 library names as reason strings for SYSerr; but SYSerr is a special
3410 case where small numbers are errno values, not library numbers.
3413 *) Add '-dsaparam' option to 'openssl dhparam' application. This
3414 converts DSA parameters into DH parameters. (When creating parameters,
3415 DSA_generate_parameters is used.)
3418 *) Include 'length' (recommended exponent length) in C code generated
3419 by 'openssl dhparam -C'.
3422 *) The second argument to set_label in perlasm was already being used
3423 so couldn't be used as a "file scope" flag. Moved to third argument
3427 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
3428 instead of RAND_bytes for encryption IVs and salts.
3431 *) Include RAND_status() into RAND_METHOD instead of implementing
3432 it only for md_rand.c Otherwise replacing the PRNG by calling
3433 RAND_set_rand_method would be impossible.
3436 *) Don't let DSA_generate_key() enter an infinite loop if the random
3437 number generation fails.
3440 *) New 'rand' application for creating pseudo-random output.
3443 *) Added configuration support for Linux/IA64
3444 [Rolf Haberrecker <rolf@suse.de>]
3446 *) Assembler module support for Mingw32.
3449 *) Shared library support for HPUX (in shlib/).
3450 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
3452 *) Shared library support for Solaris gcc.
3453 [Lutz Behnke <behnke@trustcenter.de>]
3455 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
3457 *) PKCS7_encrypt() was adding text MIME headers twice because they
3458 were added manually and by SMIME_crlf_copy().
3461 *) In bntest.c don't call BN_rand with zero bits argument.
3462 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
3464 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
3465 case was implemented. This caused BN_div_recp() to fail occasionally.
3468 *) Add an optional second argument to the set_label() in the perl
3469 assembly language builder. If this argument exists and is set
3470 to 1 it signals that the assembler should use a symbol whose
3471 scope is the entire file, not just the current function. This
3472 is needed with MASM which uses the format label:: for this scope.
3473 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
3475 *) Change the ASN1 types so they are typedefs by default. Before
3476 almost all types were #define'd to ASN1_STRING which was causing
3477 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
3481 *) Change names of new functions to the new get1/get0 naming
3482 convention: After 'get1', the caller owns a reference count
3483 and has to call ..._free; 'get0' returns a pointer to some
3484 data structure without incrementing reference counters.
3485 (Some of the existing 'get' functions increment a reference
3486 counter, some don't.)
3487 Similarly, 'set1' and 'add1' functions increase reference
3488 counters or duplicate objects.
3491 *) Allow for the possibility of temp RSA key generation failure:
3492 the code used to assume it always worked and crashed on failure.
3495 *) Fix potential buffer overrun problem in BIO_printf().
3496 [Ulf Möller, using public domain code by Patrick Powell; problem
3497 pointed out by David Sacerdote <das33@cornell.edu>]
3499 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
3500 RAND_egd() and RAND_status(). In the command line application,
3501 the EGD socket can be specified like a seed file using RANDFILE
3505 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
3506 Some CAs (e.g. Verisign) distribute certificates in this form.
3509 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
3510 list to exclude them. This means that no special compilation option
3511 is needed to use anonymous DH: it just needs to be included in the
3515 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
3516 EVP_MD_type. The old functionality is available in a new macro called
3517 EVP_MD_md(). Change code that uses it and update docs.
3520 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
3521 where the 'void *' argument is replaced by a function pointer argument.
3522 Previously 'void *' was abused to point to functions, which works on
3523 many platforms, but is not correct. As these functions are usually
3524 called by macros defined in OpenSSL header files, most source code
3525 should work without changes.
3528 *) <openssl/opensslconf.h> (which is created by Configure) now contains
3529 sections with information on -D... compiler switches used for
3530 compiling the library so that applications can see them. To enable
3531 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
3532 must be defined. E.g.,
3533 #define OPENSSL_ALGORITHM_DEFINES
3534 #include <openssl/opensslconf.h>
3535 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
3536 [Richard Levitte, Ulf and Bodo Möller]
3538 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
3542 *) Change the 'other' type in certificate aux info to a STACK_OF
3543 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
3544 the required ASN1 format: arbitrary types determined by an OID.
3547 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
3548 argument to 'req'. This is not because the function is newer or
3549 better than others it just uses the work 'NEW' in the certificate
3550 request header lines. Some software needs this.
3553 *) Reorganise password command line arguments: now passwords can be
3554 obtained from various sources. Delete the PEM_cb function and make
3555 it the default behaviour: i.e. if the callback is NULL and the
3556 usrdata argument is not NULL interpret it as a null terminated pass
3557 phrase. If usrdata and the callback are NULL then the pass phrase
3558 is prompted for as usual.
3561 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
3562 the support is automatically enabled. The resulting binaries will
3563 autodetect the card and use it if present.
3564 [Ben Laurie and Compaq Inc.]
3566 *) Work around for Netscape hang bug. This sends certificate request
3567 and server done in one record. Since this is perfectly legal in the
3568 SSL/TLS protocol it isn't a "bug" option and is on by default. See
3569 the bugs/SSLv3 entry for more info.
3572 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
3575 *) Add -rand argument to smime and pkcs12 applications and read/write
3579 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
3582 *) Add command line password options to the remaining applications.
3585 *) Bug fix for BN_div_recp() for numerators with an even number of
3589 *) More tests in bntest.c, and changed test_bn output.
3592 *) ./config recognizes MacOS X now.
3595 *) Bug fix for BN_div() when the first words of num and divsor are
3596 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
3599 *) Add support for various broken PKCS#8 formats, and command line
3600 options to produce them.
3603 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
3604 get temporary BIGNUMs from a BN_CTX.
3607 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
3611 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
3612 include a #define from the old name to the new. The original intent
3613 was that statically linked binaries could for example just call
3614 SSLeay_add_all_ciphers() to just add ciphers to the table and not
3615 link with digests. This never worked becayse SSLeay_add_all_digests()
3616 and SSLeay_add_all_ciphers() were in the same source file so calling
3617 one would link with the other. They are now in separate source files.
3620 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
3623 *) Use a less unusual form of the Miller-Rabin primality test (it used
3624 a binary algorithm for exponentiation integrated into the Miller-Rabin
3625 loop, our standard modexp algorithms are faster).
3628 *) Support for the EBCDIC character set completed.
3629 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
3631 *) Source code cleanups: use const where appropriate, eliminate casts,
3632 use void * instead of char * in lhash.
3635 *) Bugfix: ssl3_send_server_key_exchange was not restartable
3636 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
3637 this the server could overwrite ephemeral keys that the client
3641 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
3642 using 50 iterations of the Rabin-Miller test.
3644 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
3645 iterations of the Rabin-Miller test as required by the appendix
3646 to FIPS PUB 186[-1]) instead of DSA_is_prime.
3647 As BN_is_prime_fasttest includes trial division, DSA parameter
3648 generation becomes much faster.
3650 This implies a change for the callback functions in DSA_is_prime
3651 and DSA_generate_parameters: The callback function is called once
3652 for each positive witness in the Rabin-Miller test, not just
3653 occasionally in the inner loop; and the parameters to the
3654 callback function now provide an iteration count for the outer
3655 loop rather than for the current invocation of the inner loop.
3656 DSA_generate_parameters additionally can call the callback
3657 function with an 'iteration count' of -1, meaning that a
3658 candidate has passed the trial division test (when q is generated
3659 from an application-provided seed, trial division is skipped).
3662 *) New function BN_is_prime_fasttest that optionally does trial
3663 division before starting the Rabin-Miller test and has
3664 an additional BN_CTX * argument (whereas BN_is_prime always
3665 has to allocate at least one BN_CTX).
3666 'callback(1, -1, cb_arg)' is called when a number has passed the
3667 trial division stage.
3670 *) Fix for bug in CRL encoding. The validity dates weren't being handled
3674 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
3677 *) New function BN_pseudo_rand().
3680 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
3681 bignum version of BN_from_montgomery() with the working code from
3682 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
3686 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
3687 made it impossible to use the same SSL_SESSION data structure in
3688 SSL2 clients in multiple threads.
3691 *) The return value of RAND_load_file() no longer counts bytes obtained
3692 by stat(). RAND_load_file(..., -1) is new and uses the complete file
3693 to seed the PRNG (previously an explicit byte count was required).
3694 [Ulf Möller, Bodo Möller]
3696 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
3697 used (char *) instead of (void *) and had casts all over the place.
3700 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
3703 *) Retain source code compatibility for BN_prime_checks macro:
3704 BN_is_prime(..., BN_prime_checks, ...) now uses
3705 BN_prime_checks_for_size to determine the appropriate number of
3706 Rabin-Miller iterations.
3709 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
3710 DH_CHECK_P_NOT_SAFE_PRIME.
3711 (Check if this is true? OpenPGP calls them "strong".)
3714 *) Merge the functionality of "dh" and "gendh" programs into a new program
3715 "dhparam". The old programs are retained for now but will handle DH keys
3716 (instead of parameters) in future.
3719 *) Make the ciphers, s_server and s_client programs check the return values
3720 when a new cipher list is set.
3723 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
3724 ciphers. Before when the 56bit ciphers were enabled the sorting was
3727 The syntax for the cipher sorting has been extended to support sorting by
3728 cipher-strength (using the strength_bits hard coded in the tables).
3729 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
3731 Fix a bug in the cipher-command parser: when supplying a cipher command
3732 string with an "undefined" symbol (neither command nor alphanumeric
3733 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
3734 an error is flagged.
3736 Due to the strength-sorting extension, the code of the
3737 ssl_create_cipher_list() function was completely rearranged. I hope that
3738 the readability was also increased :-)
3739 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
3741 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
3742 for the first serial number and places 2 in the serial number file. This
3743 avoids problems when the root CA is created with serial number zero and
3744 the first user certificate has the same issuer name and serial number
3748 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
3749 the new code. Add documentation for this stuff.
3752 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
3753 X509_*() to X509at_*() on the grounds that they don't handle X509
3754 structures and behave in an analagous way to the X509v3 functions:
3755 they shouldn't be called directly but wrapper functions should be used
3758 So we also now have some wrapper functions that call the X509at functions
3759 when passed certificate requests. (TO DO: similar things can be done with
3760 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
3761 things. Some of these need some d2i or i2d and print functionality
3762 because they handle more complex structures.)
3765 *) Add missing #ifndefs that caused missing symbols when building libssl
3766 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
3767 NO_RSA in ssl/s2*.c.
3768 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
3770 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
3771 has a return value which indicates the quality of the random data
3772 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
3773 error queue. New function RAND_pseudo_bytes() generates output that is
3774 guaranteed to be unique but not unpredictable. RAND_add is like
3775 RAND_seed, but takes an extra argument for an entropy estimate
3776 (RAND_seed always assumes full entropy).
3779 *) Do more iterations of Rabin-Miller probable prime test (specifically,
3780 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
3781 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
3782 in crypto/bn/bn_prime.c for the complete table). This guarantees a
3783 false-positive rate of at most 2^-80 for random input.
3786 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
3789 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
3790 in the 0.9.5 release), this returns the chain
3791 from an X509_CTX structure with a dup of the stack and all
3792 the X509 reference counts upped: so the stack will exist
3793 after X509_CTX_cleanup() has been called. Modify pkcs12.c
3796 Also make SSL_SESSION_print() print out the verify return
3800 *) Add manpage for the pkcs12 command. Also change the default
3801 behaviour so MAC iteration counts are used unless the new
3802 -nomaciter option is used. This improves file security and
3803 only older versions of MSIE (4.0 for example) need it.
3806 *) Honor the no-xxx Configure options when creating .DEF files.
3809 *) Add PKCS#10 attributes to field table: challengePassword,
3810 unstructuredName and unstructuredAddress. These are taken from
3811 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
3812 international characters are used.
3814 More changes to X509_ATTRIBUTE code: allow the setting of types
3815 based on strings. Remove the 'loc' parameter when adding
3816 attributes because these will be a SET OF encoding which is sorted
3820 *) Initial changes to the 'req' utility to allow request generation
3821 automation. This will allow an application to just generate a template
3822 file containing all the field values and have req construct the
3825 Initial support for X509_ATTRIBUTE handling. Stacks of these are
3826 used all over the place including certificate requests and PKCS#7
3827 structures. They are currently handled manually where necessary with
3828 some primitive wrappers for PKCS#7. The new functions behave in a
3829 manner analogous to the X509 extension functions: they allow
3830 attributes to be looked up by NID and added.
3832 Later something similar to the X509V3 code would be desirable to
3833 automatically handle the encoding, decoding and printing of the
3834 more complex types. The string types like challengePassword can
3835 be handled by the string table functions.
3837 Also modified the multi byte string table handling. Now there is
3838 a 'global mask' which masks out certain types. The table itself
3839 can use the flag STABLE_NO_MASK to ignore the mask setting: this
3840 is useful when for example there is only one permissible type
3841 (as in countryName) and using the mask might result in no valid
3845 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
3846 SSL_get_peer_finished to allow applications to obtain the latest
3847 Finished messages sent to the peer or expected from the peer,
3848 respectively. (SSL_get_peer_finished is usually the Finished message
3849 actually received from the peer, otherwise the protocol will be aborted.)
3851 As the Finished message are message digests of the complete handshake
3852 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
3853 be used for external authentication procedures when the authentication
3854 provided by SSL/TLS is not desired or is not enough.
3857 *) Enhanced support for Alpha Linux is added. Now ./config checks if
3858 the host supports BWX extension and if Compaq C is present on the
3859 $PATH. Just exploiting of the BWX extension results in 20-30%
3860 performance kick for some algorithms, e.g. DES and RC4 to mention
3861 a couple. Compaq C in turn generates ~20% faster code for MD5 and
3865 *) Add support for MS "fast SGC". This is arguably a violation of the
3866 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
3867 weak crypto and after checking the certificate is SGC a second one
3868 with strong crypto. MS SGC stops the first handshake after receiving
3869 the server certificate message and sends a second client hello. Since
3870 a server will typically do all the time consuming operations before
3871 expecting any further messages from the client (server key exchange
3872 is the most expensive) there is little difference between the two.
3874 To get OpenSSL to support MS SGC we have to permit a second client
3875 hello message after we have sent server done. In addition we have to
3876 reset the MAC if we do get this second client hello.
3879 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
3880 if a DER encoded private key is RSA or DSA traditional format. Changed
3881 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
3882 format DER encoded private key. Newer code should use PKCS#8 format which
3883 has the key type encoded in the ASN1 structure. Added DER private key
3884 support to pkcs8 application.
3887 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
3888 ciphersuites has been selected (as required by the SSL 3/TLS 1
3889 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
3890 is set, we interpret this as a request to violate the specification
3891 (the worst that can happen is a handshake failure, and 'correct'
3892 behaviour would result in a handshake failure anyway).
3895 *) In SSL_CTX_add_session, take into account that there might be multiple
3896 SSL_SESSION structures with the same session ID (e.g. when two threads
3897 concurrently obtain them from an external cache).
3898 The internal cache can handle only one SSL_SESSION with a given ID,
3899 so if there's a conflict, we now throw out the old one to achieve
3903 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
3904 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
3905 some routines that use cipher OIDs: some ciphers do not have OIDs
3906 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
3910 *) Simplify the trust setting structure and code. Now we just have
3911 two sequences of OIDs for trusted and rejected settings. These will
3912 typically have values the same as the extended key usage extension
3913 and any application specific purposes.
3915 The trust checking code now has a default behaviour: it will just
3916 check for an object with the same NID as the passed id. Functions can
3917 be provided to override either the default behaviour or the behaviour
3918 for a given id. SSL client, server and email already have functions
3919 in place for compatibility: they check the NID and also return "trusted"
3920 if the certificate is self signed.
3923 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
3924 traditional format into an EVP_PKEY structure.
3927 *) Add a password callback function PEM_cb() which either prompts for
3928 a password if usr_data is NULL or otherwise assumes it is a null
3929 terminated password. Allow passwords to be passed on command line
3930 environment or config files in a few more utilities.
3933 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
3934 keys. Add some short names for PKCS#8 PBE algorithms and allow them
3935 to be specified on the command line for the pkcs8 and pkcs12 utilities.
3936 Update documentation.
3939 *) Support for ASN1 "NULL" type. This could be handled before by using
3940 ASN1_TYPE but there wasn't any function that would try to read a NULL
3941 and produce an error if it couldn't. For compatibility we also have
3942 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
3943 don't allocate anything because they don't need to.
3946 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
3948 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
3950 *) Rebuild of the memory allocation routines used by OpenSSL code and
3951 possibly others as well. The purpose is to make an interface that
3952 provide hooks so anyone can build a separate set of allocation and
3953 deallocation routines to be used by OpenSSL, for example memory
3954 pool implementations, or something else, which was previously hard
3955 since Malloc(), Realloc() and Free() were defined as macros having
3956 the values malloc, realloc and free, respectively (except for Win32
3957 compilations). The same is provided for memory debugging code.
3958 OpenSSL already comes with functionality to find memory leaks, but
3959 this gives people a chance to debug other memory problems.
3961 With these changes, a new set of functions and macros have appeared:
3963 CRYPTO_set_mem_debug_functions() [F]
3964 CRYPTO_get_mem_debug_functions() [F]
3965 CRYPTO_dbg_set_options() [F]
3966 CRYPTO_dbg_get_options() [F]
3967 CRYPTO_malloc_debug_init() [M]
3969 The memory debug functions are NULL by default, unless the library
3970 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
3971 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
3972 gives the standard debugging functions that come with OpenSSL) or
3973 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
3974 provided by the library user) must be used. When the standard
3975 debugging functions are used, CRYPTO_dbg_set_options can be used to
3976 request additional information:
3977 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
3978 the CRYPTO_MDEBUG_xxx macro when compiling the library.
3980 Also, things like CRYPTO_set_mem_functions will always give the
3981 expected result (the new set of functions is used for allocation
3982 and deallocation) at all times, regardless of platform and compiler
3985 To finish it up, some functions that were never use in any other
3986 way than through macros have a new API and new semantic:
3989 CRYPTO_dbg_realloc()
3992 All macros of value have retained their old syntax.
3993 [Richard Levitte and Bodo Moeller]
3995 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
3996 ordering of SMIMECapabilities wasn't in "strength order" and there
3997 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
4001 *) Some ASN1 types with illegal zero length encoding (INTEGER,
4002 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
4003 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
4005 *) Merge in my S/MIME library for OpenSSL. This provides a simple
4006 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
4007 functionality to handle multipart/signed properly) and a utility
4008 called 'smime' to call all this stuff. This is based on code I
4009 originally wrote for Celo who have kindly allowed it to be
4010 included in OpenSSL.
4013 *) Add variants des_set_key_checked and des_set_key_unchecked of
4014 des_set_key (aka des_key_sched). Global variable des_check_key
4015 decides which of these is called by des_set_key; this way
4016 des_check_key behaves as it always did, but applications and
4017 the library itself, which was buggy for des_check_key == 1,
4018 have a cleaner way to pick the version they need.
4021 *) New function PKCS12_newpass() which changes the password of a
4025 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
4026 dynamic mix. In both cases the ids can be used as an index into the
4027 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
4028 functions so they accept a list of the field values and the
4029 application doesn't need to directly manipulate the X509_TRUST
4033 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
4037 *) Modify the way the V3 extension code looks up extensions. This now
4038 works in a similar way to the object code: we have some "standard"
4039 extensions in a static table which is searched with OBJ_bsearch()
4040 and the application can add dynamic ones if needed. The file
4041 crypto/x509v3/ext_dat.h now has the info: this file needs to be
4042 updated whenever a new extension is added to the core code and kept
4043 in ext_nid order. There is a simple program 'tabtest.c' which checks
4044 this. New extensions are not added too often so this file can readily
4045 be maintained manually.
4047 There are two big advantages in doing things this way. The extensions
4048 can be looked up immediately and no longer need to be "added" using
4049 X509V3_add_standard_extensions(): this function now does nothing.
4050 [Side note: I get *lots* of email saying the extension code doesn't
4051 work because people forget to call this function]
4052 Also no dynamic allocation is done unless new extensions are added:
4053 so if we don't add custom extensions there is no need to call
4054 X509V3_EXT_cleanup().
4057 *) Modify enc utility's salting as follows: make salting the default. Add a
4058 magic header, so unsalted files fail gracefully instead of just decrypting
4059 to garbage. This is because not salting is a big security hole, so people
4060 should be discouraged from doing it.
4063 *) Fixes and enhancements to the 'x509' utility. It allowed a message
4064 digest to be passed on the command line but it only used this
4065 parameter when signing a certificate. Modified so all relevant
4066 operations are affected by the digest parameter including the
4067 -fingerprint and -x509toreq options. Also -x509toreq choked if a
4068 DSA key was used because it didn't fix the digest.
4071 *) Initial certificate chain verify code. Currently tests the untrusted
4072 certificates for consistency with the verify purpose (which is set
4073 when the X509_STORE_CTX structure is set up) and checks the pathlength.
4075 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
4076 this is because it will reject chains with invalid extensions whereas
4077 every previous version of OpenSSL and SSLeay made no checks at all.
4079 Trust code: checks the root CA for the relevant trust settings. Trust
4080 settings have an initial value consistent with the verify purpose: e.g.
4081 if the verify purpose is for SSL client use it expects the CA to be
4082 trusted for SSL client use. However the default value can be changed to
4083 permit custom trust settings: one example of this would be to only trust
4084 certificates from a specific "secure" set of CAs.
4086 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
4087 which should be used for version portability: especially since the
4088 verify structure is likely to change more often now.
4090 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
4091 to set them. If not set then assume SSL clients will verify SSL servers
4094 Two new options to the verify program: -untrusted allows a set of
4095 untrusted certificates to be passed in and -purpose which sets the
4096 intended purpose of the certificate. If a purpose is set then the
4097 new chain verify code is used to check extension consistency.
4100 *) Support for the authority information access extension.
4103 *) Modify RSA and DSA PEM read routines to transparently handle
4104 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
4105 public keys in a format compatible with certificate
4106 SubjectPublicKeyInfo structures. Unfortunately there were already
4107 functions called *_PublicKey_* which used various odd formats so
4108 these are retained for compatibility: however the DSA variants were
4109 never in a public release so they have been deleted. Changed dsa/rsa
4110 utilities to handle the new format: note no releases ever handled public
4111 keys so we should be OK.
4113 The primary motivation for this change is to avoid the same fiasco
4114 that dogs private keys: there are several incompatible private key
4115 formats some of which are standard and some OpenSSL specific and
4116 require various evil hacks to allow partial transparent handling and
4117 even then it doesn't work with DER formats. Given the option anything
4118 other than PKCS#8 should be dumped: but the other formats have to
4119 stay in the name of compatibility.
4121 With public keys and the benefit of hindsight one standard format
4122 is used which works with EVP_PKEY, RSA or DSA structures: though
4123 it clearly returns an error if you try to read the wrong kind of key.
4125 Added a -pubkey option to the 'x509' utility to output the public key.
4126 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
4127 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
4128 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
4129 that do the same as the EVP_PKEY_assign_*() except they up the
4130 reference count of the added key (they don't "swallow" the
4134 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
4135 CRLs would fail if the file contained no certificates or no CRLs:
4136 added a new function to read in both types and return the number
4137 read: this means that if none are read it will be an error. The
4138 DER versions of the certificate and CRL reader would always fail
4139 because it isn't possible to mix certificates and CRLs in DER format
4140 without choking one or the other routine. Changed this to just read
4141 a certificate: this is the best we can do. Also modified the code
4142 in apps/verify.c to take notice of return codes: it was previously
4143 attempting to read in certificates from NULL pointers and ignoring
4144 any errors: this is one reason why the cert and CRL reader seemed
4145 to work. It doesn't check return codes from the default certificate
4146 routines: these may well fail if the certificates aren't installed.
4149 *) Code to support otherName option in GeneralName.
4152 *) First update to verify code. Change the verify utility
4153 so it warns if it is passed a self signed certificate:
4154 for consistency with the normal behaviour. X509_verify
4155 has been modified to it will now verify a self signed
4156 certificate if *exactly* the same certificate appears
4157 in the store: it was previously impossible to trust a
4158 single self signed certificate. This means that:
4159 openssl verify ss.pem
4160 now gives a warning about a self signed certificate but
4161 openssl verify -CAfile ss.pem ss.pem
4165 *) For servers, store verify_result in SSL_SESSION data structure
4166 (and add it to external session representation).
4167 This is needed when client certificate verifications fails,
4168 but an application-provided verification callback (set by
4169 SSL_CTX_set_cert_verify_callback) allows accepting the session
4170 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
4171 but returns 1): When the session is reused, we have to set
4172 ssl->verify_result to the appropriate error code to avoid
4174 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
4176 *) Fix a bug in the new PKCS#7 code: it didn't consider the
4177 case in PKCS7_dataInit() where the signed PKCS7 structure
4178 didn't contain any existing data because it was being created.
4179 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
4181 *) Add a salt to the key derivation routines in enc.c. This
4182 forms the first 8 bytes of the encrypted file. Also add a
4183 -S option to allow a salt to be input on the command line.
4186 *) New function X509_cmp(). Oddly enough there wasn't a function
4187 to compare two certificates. We do this by working out the SHA1
4188 hash and comparing that. X509_cmp() will be needed by the trust
4192 *) SSL_get1_session() is like SSL_get_session(), but increments
4193 the reference count in the SSL_SESSION returned.
4194 [Geoff Thorpe <geoff@eu.c2.net>]
4196 *) Fix for 'req': it was adding a null to request attributes.
4197 Also change the X509_LOOKUP and X509_INFO code to handle
4198 certificate auxiliary information.
4201 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
4205 *) Add the possibility to add extra information to the memory leak
4206 detecting output, to form tracebacks, showing from where each
4207 allocation was originated: CRYPTO_push_info("constant string") adds
4208 the string plus current file name and line number to a per-thread
4209 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
4210 is like calling CYRPTO_pop_info() until the stack is empty.
4211 Also updated memory leak detection code to be multi-thread-safe.
4214 *) Add options -text and -noout to pkcs7 utility and delete the
4215 encryption options which never did anything. Update docs.
4218 *) Add options to some of the utilities to allow the pass phrase
4219 to be included on either the command line (not recommended on
4220 OSes like Unix) or read from the environment. Update the
4221 manpages and fix a few bugs.
4224 *) Add a few manpages for some of the openssl commands.
4227 *) Fix the -revoke option in ca. It was freeing up memory twice,
4228 leaking and not finding already revoked certificates.
4231 *) Extensive changes to support certificate auxiliary information.
4232 This involves the use of X509_CERT_AUX structure and X509_AUX
4233 functions. An X509_AUX function such as PEM_read_X509_AUX()
4234 can still read in a certificate file in the usual way but it
4235 will also read in any additional "auxiliary information". By
4236 doing things this way a fair degree of compatibility can be
4237 retained: existing certificates can have this information added
4238 using the new 'x509' options.
4240 Current auxiliary information includes an "alias" and some trust
4241 settings. The trust settings will ultimately be used in enhanced
4242 certificate chain verification routines: currently a certificate
4243 can only be trusted if it is self signed and then it is trusted
4247 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
4248 The problem was that one of the replacement routines had not been working
4249 since SSLeay releases. For now the offending routine has been replaced
4250 with non-optimised assembler. Even so, this now gives around 95%
4251 performance improvement for 1024 bit RSA signs.
4254 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
4255 handling. Most clients have the effective key size in bits equal to
4256 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
4257 A few however don't do this and instead use the size of the decrypted key
4258 to determine the RC2 key length and the AlgorithmIdentifier to determine
4259 the effective key length. In this case the effective key length can still
4260 be 40 bits but the key length can be 168 bits for example. This is fixed
4261 by manually forcing an RC2 key into the EVP_PKEY structure because the
4262 EVP code can't currently handle unusual RC2 key sizes: it always assumes
4263 the key length and effective key length are equal.
4266 *) Add a bunch of functions that should simplify the creation of
4267 X509_NAME structures. Now you should be able to do:
4268 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
4269 and have it automatically work out the correct field type and fill in
4270 the structures. The more adventurous can try:
4271 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
4272 and it will (hopefully) work out the correct multibyte encoding.
4275 *) Change the 'req' utility to use the new field handling and multibyte
4276 copy routines. Before the DN field creation was handled in an ad hoc
4277 way in req, ca, and x509 which was rather broken and didn't support
4278 BMPStrings or UTF8Strings. Since some software doesn't implement
4279 BMPStrings or UTF8Strings yet, they can be enabled using the config file
4280 using the dirstring_type option. See the new comment in the default
4281 openssl.cnf for more info.
4284 *) Make crypto/rand/md_rand.c more robust:
4285 - Assure unique random numbers after fork().
4286 - Make sure that concurrent threads access the global counter and
4287 md serializably so that we never lose entropy in them
4288 or use exactly the same state in multiple threads.
4289 Access to the large state is not always serializable because
4290 the additional locking could be a performance killer, and
4291 md should be large enough anyway.
4294 *) New file apps/app_rand.c with commonly needed functionality
4295 for handling the random seed file.
4297 Use the random seed file in some applications that previously did not:
4299 dsaparam -genkey (which also ignored its '-rand' option),
4302 x509 (when signing).
4303 Except on systems with /dev/urandom, it is crucial to have a random
4304 seed file at least for key creation, DSA signing, and for DH exchanges;
4305 for RSA signatures we could do without one.
4307 gendh and gendsa (unlike genrsa) used to read only the first byte
4308 of each file listed in the '-rand' option. The function as previously
4309 found in genrsa is now in app_rand.c and is used by all programs
4310 that support '-rand'.
4313 *) In RAND_write_file, use mode 0600 for creating files;
4314 don't just chmod when it may be too late.
4317 *) Report an error from X509_STORE_load_locations
4318 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
4321 *) New function ASN1_mbstring_copy() this copies a string in either
4322 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
4323 into an ASN1_STRING type. A mask of permissible types is passed
4324 and it chooses the "minimal" type to use or an error if not type
4328 *) Add function equivalents to the various macros in asn1.h. The old
4329 macros are retained with an M_ prefix. Code inside the library can
4330 use the M_ macros. External code (including the openssl utility)
4331 should *NOT* in order to be "shared library friendly".
4334 *) Add various functions that can check a certificate's extensions
4335 to see if it usable for various purposes such as SSL client,
4336 server or S/MIME and CAs of these types. This is currently
4337 VERY EXPERIMENTAL but will ultimately be used for certificate chain
4338 verification. Also added a -purpose flag to x509 utility to
4339 print out all the purposes.
4342 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
4346 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
4347 for, obtain and decode and extension and obtain its critical flag.
4348 This allows all the necessary extension code to be handled in a
4349 single function call.
4352 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
4353 platforms. See crypto/rc4/rc4_enc.c for further details.
4356 *) New -noout option to asn1parse. This causes no output to be produced
4357 its main use is when combined with -strparse and -out to extract data
4358 from a file (which may not be in ASN.1 format).
4361 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
4362 when producing the local key id.
4363 [Richard Levitte <levitte@stacken.kth.se>]
4365 *) New option -dhparam in s_server. This allows a DH parameter file to be
4366 stated explicitly. If it is not stated then it tries the first server
4367 certificate file. The previous behaviour hard coded the filename
4371 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
4372 a public key to be input or output. For example:
4373 openssl rsa -in key.pem -pubout -out pubkey.pem
4374 Also added necessary DSA public key functions to handle this.
4377 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
4378 in the message. This was handled by allowing
4379 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
4380 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
4382 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
4383 to the end of the strings whereas this didn't. This would cause problems
4384 if strings read with d2i_ASN1_bytes() were later modified.
4385 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
4387 *) Fix for base64 decode bug. When a base64 bio reads only one line of
4388 data and it contains EOF it will end up returning an error. This is
4389 caused by input 46 bytes long. The cause is due to the way base64
4390 BIOs find the start of base64 encoded data. They do this by trying a
4391 trial decode on each line until they find one that works. When they
4392 do a flag is set and it starts again knowing it can pass all the
4393 data directly through the decoder. Unfortunately it doesn't reset
4394 the context it uses. This means that if EOF is reached an attempt
4395 is made to pass two EOFs through the context and this causes the
4396 resulting error. This can also cause other problems as well. As is
4397 usual with these problems it takes *ages* to find and the fix is
4398 trivial: move one line.
4399 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
4401 *) Ugly workaround to get s_client and s_server working under Windows. The
4402 old code wouldn't work because it needed to select() on sockets and the
4403 tty (for keypresses and to see if data could be written). Win32 only
4404 supports select() on sockets so we select() with a 1s timeout on the
4405 sockets and then see if any characters are waiting to be read, if none
4406 are present then we retry, we also assume we can always write data to
4407 the tty. This isn't nice because the code then blocks until we've
4408 received a complete line of data and it is effectively polling the
4409 keyboard at 1s intervals: however it's quite a bit better than not
4410 working at all :-) A dedicated Windows application might handle this
4411 with an event loop for example.
4414 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
4415 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
4416 will be called when RSA_sign() and RSA_verify() are used. This is useful
4417 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
4418 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
4419 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
4420 This necessitated the support of an extra signature type NID_md5_sha1
4421 for SSL signatures and modifications to the SSL library to use it instead
4422 of calling RSA_public_decrypt() and RSA_private_encrypt().
4425 *) Add new -verify -CAfile and -CApath options to the crl program, these
4426 will lookup a CRL issuers certificate and verify the signature in a
4427 similar way to the verify program. Tidy up the crl program so it
4428 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
4429 less strict. It will now permit CRL extensions even if it is not
4430 a V2 CRL: this will allow it to tolerate some broken CRLs.
4433 *) Initialize all non-automatic variables each time one of the openssl
4434 sub-programs is started (this is necessary as they may be started
4435 multiple times from the "OpenSSL>" prompt).
4436 [Lennart Bang, Bodo Moeller]
4438 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
4439 removing all other RSA functionality (this is what NO_RSA does). This
4440 is so (for example) those in the US can disable those operations covered
4441 by the RSA patent while allowing storage and parsing of RSA keys and RSA
4445 *) Non-copying interface to BIO pairs.
4446 (still largely untested)
4449 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
4450 ASCII string. This was handled independently in various places before.
4453 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
4454 UTF8 strings a character at a time.
4457 *) Use client_version from client hello to select the protocol
4458 (s23_srvr.c) and for RSA client key exchange verification
4459 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
4462 *) Add various utility functions to handle SPKACs, these were previously
4463 handled by poking round in the structure internals. Added new function
4464 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
4465 print, verify and generate SPKACs. Based on an original idea from
4466 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
4469 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
4472 *) Allow the config file extension section to be overwritten on the
4473 command line. Based on an original idea from Massimiliano Pala
4474 <madwolf@comune.modena.it>. The new option is called -extensions
4475 and can be applied to ca, req and x509. Also -reqexts to override
4476 the request extensions in req and -crlexts to override the crl extensions
4480 *) Add new feature to the SPKAC handling in ca. Now you can include
4481 the same field multiple times by preceding it by "XXXX." for example:
4484 this is the same syntax as used in the req config file.
4487 *) Allow certificate extensions to be added to certificate requests. These
4488 are specified in a 'req_extensions' option of the req section of the
4489 config file. They can be printed out with the -text option to req but
4490 are otherwise ignored at present.
4493 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
4494 data read consists of only the final block it would not decrypted because
4495 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
4496 A misplaced 'break' also meant the decrypted final block might not be
4497 copied until the next read.
4500 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
4501 a few extra parameters to the DH structure: these will be useful if
4502 for example we want the value of 'q' or implement X9.42 DH.
4505 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
4506 provides hooks that allow the default DSA functions or functions on a
4507 "per key" basis to be replaced. This allows hardware acceleration and
4508 hardware key storage to be handled without major modification to the
4509 library. Also added low level modexp hooks and CRYPTO_EX structure and
4510 associated functions.
4513 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
4514 as "read only": it can't be written to and the buffer it points to will
4515 not be freed. Reading from a read only BIO is much more efficient than
4516 a normal memory BIO. This was added because there are several times when
4517 an area of memory needs to be read from a BIO. The previous method was
4518 to create a memory BIO and write the data to it, this results in two
4519 copies of the data and an O(n^2) reading algorithm. There is a new
4520 function BIO_new_mem_buf() which creates a read only memory BIO from
4521 an area of memory. Also modified the PKCS#7 routines to use read only
4525 *) Bugfix: ssl23_get_client_hello did not work properly when called in
4526 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
4527 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
4528 but a retry condition occured while trying to read the rest.
4531 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
4532 NID_pkcs7_encrypted by default: this was wrong since this should almost
4533 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
4534 the encrypted data type: this is a more sensible place to put it and it
4535 allows the PKCS#12 code to be tidied up that duplicated this
4539 *) Changed obj_dat.pl script so it takes its input and output files on
4540 the command line. This should avoid shell escape redirection problems
4544 *) Initial support for certificate extension requests, these are included
4545 in things like Xenroll certificate requests. Included functions to allow
4546 extensions to be obtained and added.
4549 *) -crlf option to s_client and s_server for sending newlines as
4550 CRLF (as required by many protocols).
4553 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
4555 *) Install libRSAglue.a when OpenSSL is built with RSAref.
4556 [Ralf S. Engelschall]
4558 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
4559 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
4561 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
4565 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
4566 DH parameters/keys (q is lost during that conversion, but the resulting
4567 DH parameters contain its length).
4569 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
4570 much faster than DH_generate_parameters (which creates parameters
4571 where p = 2*q + 1), and also the smaller q makes DH computations
4572 much more efficient (160-bit exponentiation instead of 1024-bit
4573 exponentiation); so this provides a convenient way to support DHE
4574 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
4575 utter importance to use
4576 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
4578 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
4579 when such DH parameters are used, because otherwise small subgroup
4580 attacks may become possible!
4583 *) Avoid memory leak in i2d_DHparams.
4586 *) Allow the -k option to be used more than once in the enc program:
4587 this allows the same encrypted message to be read by multiple recipients.
4590 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
4591 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
4592 it will always use the numerical form of the OID, even if it has a short
4596 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
4597 method only got called if p,q,dmp1,dmq1,iqmp components were present,
4598 otherwise bn_mod_exp was called. In the case of hardware keys for example
4599 no private key components need be present and it might store extra data
4600 in the RSA structure, which cannot be accessed from bn_mod_exp.
4601 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
4602 private key operations.
4605 *) Added support for SPARC Linux.
4608 *) pem_password_cb function type incompatibly changed from
4609 typedef int pem_password_cb(char *buf, int size, int rwflag);
4611 ....(char *buf, int size, int rwflag, void *userdata);
4612 so that applications can pass data to their callbacks:
4613 The PEM[_ASN1]_{read,write}... functions and macros now take an
4614 additional void * argument, which is just handed through whenever
4615 the password callback is called.
4616 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
4618 New function SSL_CTX_set_default_passwd_cb_userdata.
4620 Compatibility note: As many C implementations push function arguments
4621 onto the stack in reverse order, the new library version is likely to
4622 interoperate with programs that have been compiled with the old
4623 pem_password_cb definition (PEM_whatever takes some data that
4624 happens to be on the stack as its last argument, and the callback
4625 just ignores this garbage); but there is no guarantee whatsoever that
4628 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
4629 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
4630 problems not only on Windows, but also on some Unix platforms.
4631 To avoid problematic command lines, these definitions are now in an
4632 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
4633 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
4636 *) MIPS III/IV assembler module is reimplemented.
4639 *) More DES library cleanups: remove references to srand/rand and
4640 delete an unused file.
4643 *) Add support for the the free Netwide assembler (NASM) under Win32,
4644 since not many people have MASM (ml) and it can be hard to obtain.
4645 This is currently experimental but it seems to work OK and pass all
4646 the tests. Check out INSTALL.W32 for info.
4649 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
4650 without temporary keys kept an extra copy of the server key,
4651 and connections with temporary keys did not free everything in case
4655 *) New function RSA_check_key and new openssl rsa option -check
4656 for verifying the consistency of RSA keys.
4657 [Ulf Moeller, Bodo Moeller]
4659 *) Various changes to make Win32 compile work:
4660 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
4661 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
4662 comparison" warnings.
4663 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
4666 *) Add a debugging option to PKCS#5 v2 key generation function: when
4667 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
4668 derived keys are printed to stderr.
4671 *) Copy the flags in ASN1_STRING_dup().
4672 [Roman E. Pavlov <pre@mo.msk.ru>]
4674 *) The x509 application mishandled signing requests containing DSA
4675 keys when the signing key was also DSA and the parameters didn't match.
4677 It was supposed to omit the parameters when they matched the signing key:
4678 the verifying software was then supposed to automatically use the CA's
4679 parameters if they were absent from the end user certificate.
4681 Omitting parameters is no longer recommended. The test was also
4682 the wrong way round! This was probably due to unusual behaviour in
4683 EVP_cmp_parameters() which returns 1 if the parameters match.
4684 This meant that parameters were omitted when they *didn't* match and
4685 the certificate was useless. Certificates signed with 'ca' didn't have
4687 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
4689 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
4690 The interface is as follows:
4691 Applications can use
4692 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
4693 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
4694 "off" is now the default.
4695 The library internally uses
4696 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
4697 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
4698 to disable memory-checking temporarily.
4700 Some inconsistent states that previously were possible (and were
4701 even the default) are now avoided.
4703 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
4704 with each memory chunk allocated; this is occasionally more helpful
4705 than just having a counter.
4707 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
4709 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
4713 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
4714 which largely parallels "options", but is for changing API behaviour,
4715 whereas "options" are about protocol behaviour.
4716 Initial "mode" flags are:
4718 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
4719 a single record has been written.
4720 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
4721 retries use the same buffer location.
4722 (But all of the contents must be
4726 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
4729 *) Fix problems with no-hmac etc.
4730 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
4732 *) New functions RSA_get_default_method(), RSA_set_method() and
4733 RSA_get_method(). These allows replacement of RSA_METHODs without having
4734 to mess around with the internals of an RSA structure.
4737 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
4738 Also really enable memory leak checks in openssl.c and in some
4740 [Chad C. Mulligan, Bodo Moeller]
4742 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
4743 up the length of negative integers. This has now been simplified to just
4744 store the length when it is first determined and use it later, rather
4745 than trying to keep track of where data is copied and updating it to
4747 [Steve Henson, reported by Brien Wheeler
4748 <bwheeler@authentica-security.com>]
4750 *) Add a new function PKCS7_signatureVerify. This allows the verification
4751 of a PKCS#7 signature but with the signing certificate passed to the
4752 function itself. This contrasts with PKCS7_dataVerify which assumes the
4753 certificate is present in the PKCS#7 structure. This isn't always the
4754 case: certificates can be omitted from a PKCS#7 structure and be
4755 distributed by "out of band" means (such as a certificate database).
4758 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
4759 function prototypes in pem.h, also change util/mkdef.pl to add the
4760 necessary function names.
4763 *) mk1mf.pl (used by Windows builds) did not properly read the
4764 options set by Configure in the top level Makefile, and Configure
4765 was not even able to write more than one option correctly.
4766 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
4769 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
4770 file to be loaded from a BIO or FILE pointer. The BIO version will
4771 for example allow memory BIOs to contain config info.
4774 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
4775 Whoever hopes to achieve shared-library compatibility across versions
4776 must use this, not the compile-time macro.
4777 (Exercise 0.9.4: Which is the minimum library version required by
4779 Note: All this applies only to multi-threaded programs, others don't
4783 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
4784 through a BIO pair triggered the default case, i.e.
4785 SSLerr(...,SSL_R_UNKNOWN_STATE).
4788 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
4789 can use the SSL library even if none of the specific BIOs is
4793 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
4794 for the encoded length.
4795 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
4797 *) Add initial documentation of the X509V3 functions.
4800 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
4801 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
4802 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
4803 secure PKCS#8 private key format with a high iteration count.
4806 *) Fix determination of Perl interpreter: A perl or perl5
4807 _directory_ in $PATH was also accepted as the interpreter.
4808 [Ralf S. Engelschall]
4810 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
4811 wrong with it but it was very old and did things like calling
4812 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
4816 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
4817 to use the new extension code.
4820 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
4821 with macros. This should make it easier to change their form, add extra
4822 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
4826 *) Add to configuration table a new entry that can specify an alternative
4827 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
4828 according to Mark Crispin <MRC@Panda.COM>.
4832 *) DES CBC did not update the IV. Weird.
4835 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
4836 Changing the behaviour of the former might break existing programs --
4837 where IV updating is needed, des_ncbc_encrypt can be used.
4840 *) When bntest is run from "make test" it drives bc to check its
4841 calculations, as well as internally checking them. If an internal check
4842 fails, it needs to cause bc to give a non-zero result or make test carries
4843 on without noticing the failure. Fixed.
4846 *) DES library cleanups.
4849 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
4850 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
4851 ciphers. NOTE: although the key derivation function has been verified
4852 against some published test vectors it has not been extensively tested
4853 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
4857 *) Instead of "mkdir -p", which is not fully portable, use new
4858 Perl script "util/mkdir-p.pl".
4861 *) Rewrite the way password based encryption (PBE) is handled. It used to
4862 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
4863 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
4864 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
4865 the 'parameter' field of the AlgorithmIdentifier is passed to the
4866 underlying key generation function so it must do its own ASN1 parsing.
4867 This has also changed the EVP_PBE_CipherInit() function which now has a
4868 'parameter' argument instead of literal salt and iteration count values
4869 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
4872 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
4873 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
4874 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
4875 KEY" because this clashed with PKCS#8 unencrypted string. Since this
4876 value was just used as a "magic string" and not used directly its
4877 value doesn't matter.
4880 *) Introduce some semblance of const correctness to BN. Shame C doesn't
4884 *) "linux-sparc64" configuration (ultrapenguin).
4885 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
4886 "linux-sparc" configuration.
4887 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
4889 *) config now generates no-xxx options for missing ciphers.
4892 *) Support the EBCDIC character set (work in progress).
4893 File ebcdic.c not yet included because it has a different license.
4894 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
4896 *) Support BS2000/OSD-POSIX.
4897 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
4899 *) Make callbacks for key generation use void * instead of char *.
4902 *) Make S/MIME samples compile (not yet tested).
4905 *) Additional typesafe stacks.
4908 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
4912 Changes between 0.9.3 and 0.9.3a [29 May 1999]
4914 *) New configuration variant "sco5-gcc".
4916 *) Updated some demos.
4917 [Sean O Riordain, Wade Scholine]
4919 *) Add missing BIO_free at exit of pkcs12 application.
4922 *) Fix memory leak in conf.c.
4925 *) Updates for Win32 to assembler version of MD5.
4928 *) Set #! path to perl in apps/der_chop to where we found it
4929 instead of using a fixed path.
4932 *) SHA library changes for irix64-mips4-cc.
4935 *) Improvements for VMS support.
4939 Changes between 0.9.2b and 0.9.3 [24 May 1999]
4941 *) Bignum library bug fix. IRIX 6 passes "make test" now!
4942 This also avoids the problems with SC4.2 and unpatched SC5.
4943 [Andy Polyakov <appro@fy.chalmers.se>]
4945 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
4946 These are required because of the typesafe stack would otherwise break
4947 existing code. If old code used a structure member which used to be STACK
4948 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
4949 sk_num or sk_value it would produce an error because the num, data members
4950 are not present in STACK_OF. Now it just produces a warning. sk_set
4951 replaces the old method of assigning a value to sk_value
4952 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
4953 that does this will no longer work (and should use sk_set instead) but
4954 this could be regarded as a "questionable" behaviour anyway.
4957 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
4958 correctly handle encrypted S/MIME data.
4961 *) Change type of various DES function arguments from des_cblock
4962 (which means, in function argument declarations, pointer to char)
4963 to des_cblock * (meaning pointer to array with 8 char elements),
4964 which allows the compiler to do more typechecking; it was like
4965 that back in SSLeay, but with lots of ugly casts.
4967 Introduce new type const_des_cblock.
4970 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
4971 problems: find RecipientInfo structure that matches recipient certificate
4972 and initialise the ASN1 structures properly based on passed cipher.
4975 *) Belatedly make the BN tests actually check the results.
4978 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
4979 to and from BNs: it was completely broken. New compilation option
4980 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
4981 key elements as negative integers.
4984 *) Reorganize and speed up MD5.
4985 [Andy Polyakov <appro@fy.chalmers.se>]
4988 [Richard Levitte <richard@levitte.org>]
4990 *) New option -out to asn1parse to allow the parsed structure to be
4991 output to a file. This is most useful when combined with the -strparse
4992 option to examine the output of things like OCTET STRINGS.
4995 *) Make SSL library a little more fool-proof by not requiring any longer
4996 that SSL_set_{accept,connect}_state be called before
4997 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
4998 in many applications because usually everything *appeared* to work as
4999 intended anyway -- now it really works as intended).
5002 *) Move openssl.cnf out of lib/.
5005 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
5006 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
5007 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
5008 [Ralf S. Engelschall]
5010 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
5011 handle PKCS#7 enveloped data properly.
5012 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
5014 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
5015 copying pointers. The cert_st handling is changed by this in
5016 various ways (and thus what used to be known as ctx->default_cert
5017 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
5018 any longer when s->cert does not give us what we need).
5019 ssl_cert_instantiate becomes obsolete by this change.
5020 As soon as we've got the new code right (possibly it already is?),
5021 we have solved a couple of bugs of the earlier code where s->cert
5022 was used as if it could not have been shared with other SSL structures.
5024 Note that using the SSL API in certain dirty ways now will result
5025 in different behaviour than observed with earlier library versions:
5026 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
5027 does not influence s as it used to.
5029 In order to clean up things more thoroughly, inside SSL_SESSION
5030 we don't use CERT any longer, but a new structure SESS_CERT
5031 that holds per-session data (if available); currently, this is
5032 the peer's certificate chain and, for clients, the server's certificate
5033 and temporary key. CERT holds only those values that can have
5034 meaningful defaults in an SSL_CTX.
5037 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
5038 from the internal representation. Various PKCS#7 fixes: remove some
5039 evil casts and set the enc_dig_alg field properly based on the signing
5043 *) Allow PKCS#12 password to be set from the command line or the
5044 environment. Let 'ca' get its config file name from the environment
5045 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
5049 *) Allow certificate policies extension to use an IA5STRING for the
5050 organization field. This is contrary to the PKIX definition but
5051 VeriSign uses it and IE5 only recognises this form. Document 'x509'
5055 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
5056 without disallowing inline assembler and the like for non-pedantic builds.
5059 *) Support Borland C++ builder.
5060 [Janez Jere <jj@void.si>, modified by Ulf Möller]
5065 *) SHA-1 cleanups and performance enhancements.
5066 [Andy Polyakov <appro@fy.chalmers.se>]
5068 *) Sparc v8plus assembler for the bignum library.
5069 [Andy Polyakov <appro@fy.chalmers.se>]
5071 *) Accept any -xxx and +xxx compiler options in Configure.
5074 *) Update HPUX configuration.
5077 *) Add missing sk_<type>_unshift() function to safestack.h
5078 [Ralf S. Engelschall]
5080 *) New function SSL_CTX_use_certificate_chain_file that sets the
5081 "extra_cert"s in addition to the certificate. (This makes sense
5082 only for "PEM" format files, as chains as a whole are not
5086 *) Support verify_depth from the SSL API.
5087 x509_vfy.c had what can be considered an off-by-one-error:
5088 Its depth (which was not part of the external interface)
5089 was actually counting the number of certificates in a chain;
5090 now it really counts the depth.
5093 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
5094 instead of X509err, which often resulted in confusing error
5095 messages since the error codes are not globally unique
5096 (e.g. an alleged error in ssl3_accept when a certificate
5097 didn't match the private key).
5099 *) New function SSL_CTX_set_session_id_context that allows to set a default
5100 value (so that you don't need SSL_set_session_id_context for each
5101 connection using the SSL_CTX).
5104 *) OAEP decoding bug fix.
5107 *) Support INSTALL_PREFIX for package builders, as proposed by
5111 *) New Configure options "threads" and "no-threads". For systems
5112 where the proper compiler options are known (currently Solaris
5113 and Linux), "threads" is the default.
5116 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
5119 *) Install various scripts to $(OPENSSLDIR)/misc, not to
5120 $(INSTALLTOP)/bin -- they shouldn't clutter directories
5121 such as /usr/local/bin.
5124 *) "make linux-shared" to build shared libraries.
5125 [Niels Poppe <niels@netbox.org>]
5127 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
5130 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
5131 extension adding in x509 utility.
5134 *) Remove NOPROTO sections and error code comments.
5137 *) Partial rewrite of the DEF file generator to now parse the ANSI
5141 *) New Configure options --prefix=DIR and --openssldir=DIR.
5144 *) Complete rewrite of the error code script(s). It is all now handled
5145 by one script at the top level which handles error code gathering,
5146 header rewriting and C source file generation. It should be much better
5147 than the old method: it now uses a modified version of Ulf's parser to
5148 read the ANSI prototypes in all header files (thus the old K&R definitions
5149 aren't needed for error creation any more) and do a better job of
5150 translating function codes into names. The old 'ASN1 error code imbedded
5151 in a comment' is no longer necessary and it doesn't use .err files which
5152 have now been deleted. Also the error code call doesn't have to appear all
5153 on one line (which resulted in some large lines...).
5156 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
5159 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
5160 0 (which usually indicates a closed connection), but continue reading.
5163 *) Fix some race conditions.
5166 *) Add support for CRL distribution points extension. Add Certificate
5167 Policies and CRL distribution points documentation.
5170 *) Move the autogenerated header file parts to crypto/opensslconf.h.
5173 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
5174 8 of keying material. Merlin has also confirmed interop with this fix
5175 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
5176 [Merlin Hughes <merlin@baltimore.ie>]
5178 *) Fix lots of warnings.
5179 [Richard Levitte <levitte@stacken.kth.se>]
5181 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
5182 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
5183 [Richard Levitte <levitte@stacken.kth.se>]
5185 *) Fix problems with sizeof(long) == 8.
5186 [Andy Polyakov <appro@fy.chalmers.se>]
5188 *) Change functions to ANSI C.
5191 *) Fix typos in error codes.
5192 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
5194 *) Remove defunct assembler files from Configure.
5197 *) SPARC v8 assembler BIGNUM implementation.
5198 [Andy Polyakov <appro@fy.chalmers.se>]
5200 *) Support for Certificate Policies extension: both print and set.
5201 Various additions to support the r2i method this uses.
5204 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
5205 return a const string when you are expecting an allocated buffer.
5208 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
5209 types DirectoryString and DisplayText.
5212 *) Add code to allow r2i extensions to access the configuration database,
5213 add an LHASH database driver and add several ctx helper functions.
5216 *) Fix an evil bug in bn_expand2() which caused various BN functions to
5217 fail when they extended the size of a BIGNUM.
5220 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
5221 support typesafe stack.
5224 *) Fix typo in SSL_[gs]et_options().
5225 [Nils Frostberg <nils@medcom.se>]
5227 *) Delete various functions and files that belonged to the (now obsolete)
5228 old X509V3 handling code.
5231 *) New Configure option "rsaref".
5234 *) Don't auto-generate pem.h.
5237 *) Introduce type-safe ASN.1 SETs.
5240 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
5241 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
5243 *) Introduce type-safe STACKs. This will almost certainly break lots of code
5244 that links with OpenSSL (well at least cause lots of warnings), but fear
5245 not: the conversion is trivial, and it eliminates loads of evil casts. A
5246 few STACKed things have been converted already. Feel free to convert more.
5247 In the fullness of time, I'll do away with the STACK type altogether.
5250 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
5251 specified in <certfile> by updating the entry in the index.txt file.
5252 This way one no longer has to edit the index.txt file manually for
5253 revoking a certificate. The -revoke option does the gory details now.
5254 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
5256 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
5257 `-text' option at all and this way the `-noout -text' combination was
5258 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
5259 [Ralf S. Engelschall]
5261 *) Make sure a corresponding plain text error message exists for the
5262 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
5263 verify callback function determined that a certificate was revoked.
5264 [Ralf S. Engelschall]
5266 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
5267 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
5268 all available cipers including rc5, which was forgotten until now.
5269 In order to let the testing shell script know which algorithms
5270 are available, a new (up to now undocumented) command
5271 "openssl list-cipher-commands" is used.
5274 *) Bugfix: s_client occasionally would sleep in select() when
5275 it should have checked SSL_pending() first.
5278 *) New functions DSA_do_sign and DSA_do_verify to provide access to
5279 the raw DSA values prior to ASN.1 encoding.
5282 *) Tweaks to Configure
5283 [Niels Poppe <niels@netbox.org>]
5285 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
5289 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
5292 *) New config option to avoid instructions that are illegal on the 80386.
5293 The default code is faster, but requires at least a 486.
5296 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
5297 SSL2_SERVER_VERSION (not used at all) macros, which are now the
5298 same as SSL2_VERSION anyway.
5301 *) New "-showcerts" option for s_client.
5304 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
5305 application. Various cleanups and fixes.
5308 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
5309 modify error routines to work internally. Add error codes and PBE init
5310 to library startup routines.
5313 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
5314 packing functions to asn1 and evp. Changed function names and error
5315 codes along the way.
5318 *) PKCS12 integration: and so it begins... First of several patches to
5319 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
5320 objects to objects.h
5323 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
5324 and display support for Thawte strong extranet extension.
5327 *) Add LinuxPPC support.
5328 [Jeff Dubrule <igor@pobox.org>]
5330 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
5331 bn_div_words in alpha.s.
5332 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
5334 *) Make sure the RSA OAEP test is skipped under -DRSAref because
5335 OAEP isn't supported when OpenSSL is built with RSAref.
5336 [Ulf Moeller <ulf@fitug.de>]
5338 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
5339 so they no longer are missing under -DNOPROTO.
5340 [Soren S. Jorvang <soren@t.dk>]
5343 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
5345 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
5346 doesn't work when the session is reused. Coming soon!
5349 *) Fix a security hole, that allows sessions to be reused in the wrong
5350 context thus bypassing client cert protection! All software that uses
5351 client certs and session caches in multiple contexts NEEDS PATCHING to
5352 allow session reuse! A fuller solution is in the works.
5353 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
5355 *) Some more source tree cleanups (removed obsolete files
5356 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
5357 permission on "config" script to be executable) and a fix for the INSTALL
5359 [Ulf Moeller <ulf@fitug.de>]
5361 *) Remove some legacy and erroneous uses of malloc, free instead of
5363 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
5365 *) Make rsa_oaep_test return non-zero on error.
5366 [Ulf Moeller <ulf@fitug.de>]
5368 *) Add support for native Solaris shared libraries. Configure
5369 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
5370 if someone would make that last step automatic.
5371 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
5373 *) ctx_size was not built with the right compiler during "make links". Fixed.
5376 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
5377 except NULL ciphers". This means the default cipher list will no longer
5378 enable NULL ciphers. They need to be specifically enabled e.g. with
5379 the string "DEFAULT:eNULL".
5382 *) Fix to RSA private encryption routines: if p < q then it would
5383 occasionally produce an invalid result. This will only happen with
5384 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
5387 *) Be less restrictive and allow also `perl util/perlpath.pl
5388 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
5389 because this way one can also use an interpreter named `perl5' (which is
5390 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
5391 installed as `perl').
5392 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
5394 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
5395 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
5397 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
5398 advapi32.lib to Win32 build and change the pem test comparision
5399 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
5400 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
5401 and crypto/des/ede_cbcm_enc.c.
5404 *) DES quad checksum was broken on big-endian architectures. Fixed.
5407 *) Comment out two functions in bio.h that aren't implemented. Fix up the
5408 Win32 test batch file so it (might) work again. The Win32 test batch file
5409 is horrible: I feel ill....
5412 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
5413 in e_os.h. Audit of header files to check ANSI and non ANSI
5414 sections: 10 functions were absent from non ANSI section and not exported
5415 from Windows DLLs. Fixed up libeay.num for new functions.
5418 *) Make `openssl version' output lines consistent.
5419 [Ralf S. Engelschall]
5421 *) Fix Win32 symbol export lists for BIO functions: Added
5422 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
5423 to ms/libeay{16,32}.def.
5424 [Ralf S. Engelschall]
5426 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
5427 fine under Unix and passes some trivial tests I've now added. But the
5428 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
5429 added to make sure no one expects that this stuff really works in the
5430 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
5431 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
5433 [Ralf S. Engelschall]
5435 *) Fix the generation of two part addresses in perl.
5436 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
5438 *) Add config entry for Linux on MIPS.
5439 [John Tobey <jtobey@channel1.com>]
5441 *) Make links whenever Configure is run, unless we are on Windoze.
5444 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
5445 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
5449 *) Add a useful kludge to allow package maintainers to specify compiler and
5450 other platforms details on the command line without having to patch the
5451 Configure script everytime: One now can use ``perl Configure
5452 <id>:<details>'', i.e. platform ids are allowed to have details appended
5453 to them (seperated by colons). This is treated as there would be a static
5454 pre-configured entry in Configure's %table under key <id> with value
5455 <details> and ``perl Configure <id>'' is called. So, when you want to
5456 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
5457 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
5458 now, which overrides the FreeBSD-elf entry on-the-fly.
5459 [Ralf S. Engelschall]
5461 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
5464 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
5465 on the `perl Configure ...' command line. This way one can compile
5466 OpenSSL libraries with Position Independent Code (PIC) which is needed
5467 for linking it into DSOs.
5468 [Ralf S. Engelschall]
5470 *) Remarkably, export ciphers were totally broken and no-one had noticed!
5474 *) Cleaned up the LICENSE document: The official contact for any license
5475 questions now is the OpenSSL core team under openssl-core@openssl.org.
5476 And add a paragraph about the dual-license situation to make sure people
5477 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
5478 to the OpenSSL toolkit.
5479 [Ralf S. Engelschall]
5481 *) General source tree makefile cleanups: Made `making xxx in yyy...'
5482 display consistent in the source tree and replaced `/bin/rm' by `rm'.
5483 Additonally cleaned up the `make links' target: Remove unnecessary
5484 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
5485 to speed processing and no longer clutter the display with confusing
5486 stuff. Instead only the actually done links are displayed.
5487 [Ralf S. Engelschall]
5489 *) Permit null encryption ciphersuites, used for authentication only. It used
5490 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
5491 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
5495 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
5496 signed attributes when verifying signatures (this would break them),
5497 the detached data encoding was wrong and public keys obtained using
5498 X509_get_pubkey() weren't freed.
5501 *) Add text documentation for the BUFFER functions. Also added a work around
5502 to a Win95 console bug. This was triggered by the password read stuff: the
5503 last character typed gets carried over to the next fread(). If you were
5504 generating a new cert request using 'req' for example then the last
5505 character of the passphrase would be CR which would then enter the first
5509 *) Added the new `Includes OpenSSL Cryptography Software' button as
5510 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
5511 button and can be used by applications based on OpenSSL to show the
5512 relationship to the OpenSSL project.
5513 [Ralf S. Engelschall]
5515 *) Remove confusing variables in function signatures in files
5516 ssl/ssl_lib.c and ssl/ssl.h.
5517 [Lennart Bong <lob@kulthea.stacken.kth.se>]
5519 *) Don't install bss_file.c under PREFIX/include/
5520 [Lennart Bong <lob@kulthea.stacken.kth.se>]
5522 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
5523 functions that return function pointers and has support for NT specific
5524 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
5525 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
5526 unsigned to signed types: this was killing the Win32 compile.
5529 *) Add new certificate file to stack functions,
5530 SSL_add_dir_cert_subjects_to_stack() and
5531 SSL_add_file_cert_subjects_to_stack(). These largely supplant
5532 SSL_load_client_CA_file(), and can be used to add multiple certs easily
5533 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
5534 This means that Apache-SSL and similar packages don't have to mess around
5535 to add as many CAs as they want to the preferred list.
5538 *) Experiment with doxygen documentation. Currently only partially applied to
5540 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
5541 openssl.doxy as the configuration file.
5544 *) Get rid of remaining C++-style comments which strict C compilers hate.
5545 [Ralf S. Engelschall, pointed out by Carlos Amengual]
5547 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
5548 compiled in by default: it has problems with large keys.
5551 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
5552 DH private keys and/or callback functions which directly correspond to
5553 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
5554 is needed for applications which have to configure certificates on a
5555 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
5557 For the RSA certificate situation is makes no difference, but
5558 for the DSA certificate situation this fixes the "no shared cipher"
5559 problem where the OpenSSL cipher selection procedure failed because the
5560 temporary keys were not overtaken from the context and the API provided
5561 no way to reconfigure them.
5562 The new functions now let applications reconfigure the stuff and they
5563 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
5564 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
5565 non-public-API function ssl_cert_instantiate() is used as a helper
5566 function and also to reduce code redundancy inside ssl_rsa.c.
5567 [Ralf S. Engelschall]
5569 *) Move s_server -dcert and -dkey options out of the undocumented feature
5570 area because they are useful for the DSA situation and should be
5571 recognized by the users.
5572 [Ralf S. Engelschall]
5574 *) Fix the cipher decision scheme for export ciphers: the export bits are
5575 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
5576 SSL_EXP_MASK. So, the original variable has to be used instead of the
5577 already masked variable.
5578 [Richard Levitte <levitte@stacken.kth.se>]
5580 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
5581 [Richard Levitte <levitte@stacken.kth.se>]
5583 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
5584 from `int' to `unsigned int' because it's a length and initialized by
5585 EVP_DigestFinal() which expects an `unsigned int *'.
5586 [Richard Levitte <levitte@stacken.kth.se>]
5588 *) Don't hard-code path to Perl interpreter on shebang line of Configure
5589 script. Instead use the usual Shell->Perl transition trick.
5590 [Ralf S. Engelschall]
5592 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
5593 (in addition to RSA certificates) to match the behaviour of `openssl dsa
5594 -noout -modulus' as it's already the case for `openssl rsa -noout
5595 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
5596 currently the public key is printed (a decision which was already done by
5597 `openssl dsa -modulus' in the past) which serves a similar purpose.
5598 Additionally the NO_RSA no longer completely removes the whole -modulus
5599 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
5601 [Ralf S. Engelschall]
5603 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
5604 BIO. See the source (crypto/evp/bio_ok.c) for more info.
5605 [Arne Ansper <arne@ats.cyber.ee>]
5607 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
5608 to be added. Now both 'req' and 'ca' can use new objects defined in the
5612 *) Add cool BIO that does syslog (or event log on NT).
5613 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
5615 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
5616 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
5617 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
5618 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
5621 *) Add preliminary config info for new extension code.
5624 *) Make RSA_NO_PADDING really use no padding.
5625 [Ulf Moeller <ulf@fitug.de>]
5627 *) Generate errors when private/public key check is done.
5630 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
5631 for some CRL extensions and new objects added.
5634 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
5635 key usage extension and fuller support for authority key id.
5638 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
5639 padding method for RSA, which is recommended for new applications in PKCS
5640 #1 v2.0 (RFC 2437, October 1998).
5641 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
5642 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
5643 against Bleichbacher's attack on RSA.
5644 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
5647 *) Updates to the new SSL compression code
5648 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
5650 *) Fix so that the version number in the master secret, when passed
5651 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
5652 (because the server will not accept higher), that the version number
5653 is 0x03,0x01, not 0x03,0x00
5654 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
5656 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
5657 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
5658 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
5661 *) Support for RAW extensions where an arbitrary extension can be
5662 created by including its DER encoding. See apps/openssl.cnf for
5666 *) Make sure latest Perl versions don't interpret some generated C array
5667 code as Perl array code in the crypto/err/err_genc.pl script.
5668 [Lars Weber <3weber@informatik.uni-hamburg.de>]
5670 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
5671 not many people have the assembler. Various Win32 compilation fixes and
5672 update to the INSTALL.W32 file with (hopefully) more accurate Win32
5676 *) Modify configure script 'Configure' to automatically create crypto/date.h
5677 file under Win32 and also build pem.h from pem.org. New script
5678 util/mkfiles.pl to create the MINFO file on environments that can't do a
5679 'make files': perl util/mkfiles.pl >MINFO should work.
5682 *) Major rework of DES function declarations, in the pursuit of correctness
5683 and purity. As a result, many evil casts evaporated, and some weirdness,
5684 too. You may find this causes warnings in your code. Zapping your evil
5685 casts will probably fix them. Mostly.
5688 *) Fix for a typo in asn1.h. Bug fix to object creation script
5689 obj_dat.pl. It considered a zero in an object definition to mean
5690 "end of object": none of the objects in objects.h have any zeros
5691 so it wasn't spotted.
5692 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
5694 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
5695 Masking (CBCM). In the absence of test vectors, the best I have been able
5696 to do is check that the decrypt undoes the encrypt, so far. Send me test
5697 vectors if you have them.
5700 *) Correct calculation of key length for export ciphers (too much space was
5701 allocated for null ciphers). This has not been tested!
5704 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
5705 message is now correct (it understands "crypto" and "ssl" on its
5706 command line). There is also now an "update" option. This will update
5707 the util/ssleay.num and util/libeay.num files with any new functions.
5709 perl util/mkdef.pl crypto ssl update
5710 it will update them.
5713 *) Overhauled the Perl interface (perl/*):
5714 - ported BN stuff to OpenSSL's different BN library
5715 - made the perl/ source tree CVS-aware
5716 - renamed the package from SSLeay to OpenSSL (the files still contain
5717 their history because I've copied them in the repository)
5718 - removed obsolete files (the test scripts will be replaced
5719 by better Test::Harness variants in the future)
5720 [Ralf S. Engelschall]
5722 *) First cut for a very conservative source tree cleanup:
5723 1. merge various obsolete readme texts into doc/ssleay.txt
5724 where we collect the old documents and readme texts.
5725 2. remove the first part of files where I'm already sure that we no
5726 longer need them because of three reasons: either they are just temporary
5727 files which were left by Eric or they are preserved original files where
5728 I've verified that the diff is also available in the CVS via "cvs diff
5729 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
5730 the crypto/md/ stuff).
5731 [Ralf S. Engelschall]
5733 *) More extension code. Incomplete support for subject and issuer alt
5734 name, issuer and authority key id. Change the i2v function parameters
5735 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
5736 what that's for :-) Fix to ASN1 macro which messed up
5737 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
5740 *) Preliminary support for ENUMERATED type. This is largely copied from the
5744 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
5745 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
5747 *) Make sure `make rehash' target really finds the `openssl' program.
5748 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
5750 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
5751 like to hear about it if this slows down other processors.
5754 *) Add CygWin32 platform information to Configure script.
5755 [Alan Batie <batie@aahz.jf.intel.com>]
5757 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
5758 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
5760 *) New program nseq to manipulate netscape certificate sequences
5763 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
5767 *) Fixes to BN code. Previously the default was to define BN_RECURSION
5768 but the BN code had some problems that would cause failures when
5769 doing certificate verification and some other functions.
5770 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
5772 *) Add ASN1 and PEM code to support netscape certificate sequences.
5775 *) Add ASN1 and PEM code to support netscape certificate sequences.
5778 *) Add several PKIX and private extended key usage OIDs.
5781 *) Modify the 'ca' program to handle the new extension code. Modify
5782 openssl.cnf for new extension format, add comments.
5785 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
5786 and add a sample to openssl.cnf so req -x509 now adds appropriate
5790 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
5791 error code, add initial support to X509_print() and x509 application.
5794 *) Takes a deep breath and start addding X509 V3 extension support code. Add
5795 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
5796 stuff is currently isolated and isn't even compiled yet.
5799 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
5800 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
5801 Removed the versions check from X509 routines when loading extensions:
5802 this allows certain broken certificates that don't set the version
5803 properly to be processed.
5806 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
5807 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
5808 can still be regenerated with "make depend".
5811 *) Spelling mistake in C version of CAST-128.
5812 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
5814 *) Changes to the error generation code. The perl script err-code.pl
5815 now reads in the old error codes and retains the old numbers, only
5816 adding new ones if necessary. It also only changes the .err files if new
5817 codes are added. The makefiles have been modified to only insert errors
5818 when needed (to avoid needlessly modifying header files). This is done
5819 by only inserting errors if the .err file is newer than the auto generated
5820 C file. To rebuild all the error codes from scratch (the old behaviour)
5821 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
5822 or delete all the .err files.
5825 *) CAST-128 was incorrectly implemented for short keys. The C version has
5826 been fixed, but is untested. The assembler versions are also fixed, but
5827 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
5828 to regenerate it if needed.
5829 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
5830 Hagino <itojun@kame.net>]
5832 *) File was opened incorrectly in randfile.c.
5833 [Ulf Möller <ulf@fitug.de>]
5835 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
5836 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
5837 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
5838 al: it's just almost always a UTCTime. Note this patch adds new error
5839 codes so do a "make errors" if there are problems.
5842 *) Correct Linux 1 recognition in config.
5843 [Ulf Möller <ulf@fitug.de>]
5845 *) Remove pointless MD5 hash when using DSA keys in ca.
5846 [Anonymous <nobody@replay.com>]
5848 *) Generate an error if given an empty string as a cert directory. Also
5849 generate an error if handed NULL (previously returned 0 to indicate an
5850 error, but didn't set one).
5851 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
5853 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
5856 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
5857 parameters. This was causing a warning which killed off the Win32 compile.
5860 *) Remove C++ style comments from crypto/bn/bn_local.h.
5861 [Neil Costigan <neil.costigan@celocom.com>]
5863 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
5864 based on a text string, looking up short and long names and finally
5865 "dot" format. The "dot" format stuff didn't work. Added new function
5866 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
5867 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
5868 OID is not part of the table.
5871 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
5872 X509_LOOKUP_by_alias().
5875 *) Sort openssl functions by name.
5878 *) Get the gendsa program working (hopefully) and add it to app list. Remove
5879 encryption from sample DSA keys (in case anyone is interested the password
5883 *) Make _all_ *_free functions accept a NULL pointer.
5884 [Frans Heymans <fheymans@isaserver.be>]
5886 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
5888 [Anonymous <nobody@replay.com>]
5890 *) s_server should send the CAfile as acceptable CAs, not its own cert.
5891 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
5893 *) Don't blow it for numeric -newkey arguments to apps/req.
5894 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
5896 *) Temp key "for export" tests were wrong in s3_srvr.c.
5897 [Anonymous <nobody@replay.com>]
5899 *) Add prototype for temp key callback functions
5900 SSL_CTX_set_tmp_{rsa,dh}_callback().
5903 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
5904 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
5907 *) X509_name_add_entry() freed the wrong thing after an error.
5908 [Arne Ansper <arne@ats.cyber.ee>]
5910 *) rsa_eay.c would attempt to free a NULL context.
5911 [Arne Ansper <arne@ats.cyber.ee>]
5913 *) BIO_s_socket() had a broken should_retry() on Windoze.
5914 [Arne Ansper <arne@ats.cyber.ee>]
5916 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
5917 [Arne Ansper <arne@ats.cyber.ee>]
5919 *) Make sure the already existing X509_STORE->depth variable is initialized
5920 in X509_STORE_new(), but document the fact that this variable is still
5921 unused in the certificate verification process.
5922 [Ralf S. Engelschall]
5924 *) Fix the various library and apps files to free up pkeys obtained from
5925 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
5928 *) Fix reference counting in X509_PUBKEY_get(). This makes
5929 demos/maurice/example2.c work, amongst others, probably.
5930 [Steve Henson and Ben Laurie]
5932 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
5933 `openssl' and second, the shortcut symlinks for the `openssl <command>'
5934 are no longer created. This way we have a single and consistent command
5935 line interface `openssl <command>', similar to `cvs <command>'.
5936 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
5938 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
5939 BIT STRING wrapper always have zero unused bits.
5942 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
5945 *) Make the top-level INSTALL documentation easier to understand.
5948 *) Makefiles updated to exit if an error occurs in a sub-directory
5949 make (including if user presses ^C) [Paul Sutton]
5951 *) Make Montgomery context stuff explicit in RSA data structure.
5954 *) Fix build order of pem and err to allow for generated pem.h.
5957 *) Fix renumbering bug in X509_NAME_delete_entry().
5960 *) Enhanced the err-ins.pl script so it makes the error library number
5961 global and can add a library name. This is needed for external ASN1 and
5962 other error libraries.
5965 *) Fixed sk_insert which never worked properly.
5968 *) Fix ASN1 macros so they can handle indefinite length construted
5969 EXPLICIT tags. Some non standard certificates use these: they can now
5973 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
5974 into a single doc/ssleay.txt bundle. This way the information is still
5975 preserved but no longer messes up this directory. Now it's new room for
5976 the new set of documenation files.
5977 [Ralf S. Engelschall]
5979 *) SETs were incorrectly DER encoded. This was a major pain, because they
5980 shared code with SEQUENCEs, which aren't coded the same. This means that
5981 almost everything to do with SETs or SEQUENCEs has either changed name or
5982 number of arguments.
5983 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
5985 *) Fix test data to work with the above.
5988 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
5989 was already fixed by Eric for 0.9.1 it seems.
5990 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
5992 *) Autodetect FreeBSD3.
5995 *) Fix various bugs in Configure. This affects the following platforms:
5999 unixware-2.0-pentium
6003 *) Eliminate generated files from CVS. Reorder tests to regenerate files
6004 before they are needed.
6007 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
6011 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
6013 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
6014 changed SSLeay to OpenSSL in version strings.
6015 [Ralf S. Engelschall]
6017 *) Some fixups to the top-level documents.
6020 *) Fixed the nasty bug where rsaref.h was not found under compile-time
6021 because the symlink to include/ was missing.
6022 [Ralf S. Engelschall]
6024 *) Incorporated the popular no-RSA/DSA-only patches
6025 which allow to compile a RSA-free SSLeay.
6026 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
6028 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
6029 when "ssleay" is still not found.
6030 [Ralf S. Engelschall]
6032 *) Added more platforms to Configure: Cray T3E, HPUX 11,
6033 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
6035 *) Updated the README file.
6036 [Ralf S. Engelschall]
6038 *) Added various .cvsignore files in the CVS repository subdirs
6039 to make a "cvs update" really silent.
6040 [Ralf S. Engelschall]
6042 *) Recompiled the error-definition header files and added
6043 missing symbols to the Win32 linker tables.
6044 [Ralf S. Engelschall]
6046 *) Cleaned up the top-level documents;
6047 o new files: CHANGES and LICENSE
6048 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
6049 o merged COPYRIGHT into LICENSE
6050 o removed obsolete TODO file
6051 o renamed MICROSOFT to INSTALL.W32
6052 [Ralf S. Engelschall]
6054 *) Removed dummy files from the 0.9.1b source tree:
6055 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
6056 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
6057 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
6058 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
6059 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
6060 [Ralf S. Engelschall]
6062 *) Added various platform portability fixes.
6065 *) The Genesis of the OpenSSL rpject:
6066 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
6067 Young and Tim J. Hudson created while they were working for C2Net until
6069 [The OpenSSL Project]
6072 Changes between 0.9.0b and 0.9.1b [not released]
6074 *) Updated a few CA certificates under certs/
6077 *) Changed some BIGNUM api stuff.
6080 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
6081 DGUX x86, Linux Alpha, etc.
6084 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
6085 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
6089 *) Add -strparse option to asn1pars program which parses nested
6091 [Dr Stephen Henson <shenson@bigfoot.com>]
6093 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
6096 *) DSA fix for "ca" program.
6099 *) Added "-genkey" option to "dsaparam" program.
6102 *) Added RIPE MD160 (rmd160) message digest.
6105 *) Added -a (all) option to "ssleay version" command.
6108 *) Added PLATFORM define which is the id given to Configure.
6111 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
6114 *) Extended the ASN.1 parser routines.
6117 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
6120 *) Added a BN_CTX to the BN library.
6123 *) Fixed the weak key values in DES library
6126 *) Changed API in EVP library for cipher aliases.
6129 *) Added support for RC2/64bit cipher.
6132 *) Converted the lhash library to the crypto/mem.c functions.
6135 *) Added more recognized ASN.1 object ids.
6138 *) Added more RSA padding checks for SSL/TLS.
6141 *) Added BIO proxy/filter functionality.
6144 *) Added extra_certs to SSL_CTX which can be used
6145 send extra CA certificates to the client in the CA cert chain sending
6146 process. It can be configured with SSL_CTX_add_extra_chain_cert().
6149 *) Now Fortezza is denied in the authentication phase because
6150 this is key exchange mechanism is not supported by SSLeay at all.
6153 *) Additional PKCS1 checks.
6156 *) Support the string "TLSv1" for all TLS v1 ciphers.
6159 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
6160 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
6163 *) Fixed a few memory leaks.
6166 *) Fixed various code and comment typos.
6169 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
6170 bytes sent in the client random.
6171 [Edward Bishop <ebishop@spyglass.com>]
projects / openssl.git / blob