From 5be4a42e9903c453257beb98d5a33b904b9d6a37 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Ulf=20M=C3=B6ller?= Date: Fri, 21 Feb 2003 22:09:52 +0000 Subject: [PATCH] update mingw info --- INSTALL.W32 | 552 ++++++++++++++++++++++++++-------------------------- 1 file changed, 274 insertions(+), 278 deletions(-) diff --git a/INSTALL.W32 b/INSTALL.W32 index fd182595c5..de09fcba4a 100644 --- a/INSTALL.W32 +++ b/INSTALL.W32 @@ -1,278 +1,274 @@ - - INSTALLATION ON THE WIN32 PLATFORM - ---------------------------------- - - [Instructions for building for Windows CE can be found in INSTALL.WCE] - - Heres a few comments about building OpenSSL in Windows environments. Most - of this is tested on Win32 but it may also work in Win 3.1 with some - modification. - - You need Perl for Win32. Unless you will build on Cygwin, you will need - ActiveState Perl, available from http://www.activestate.com/ActivePerl. - For Cygwin users, there's more info in the Cygwin section. - - and one of the following C compilers: - - * Visual C++ - * Borland C - * GNU C (Mingw32 or Cygwin) - - If you want to compile in the assembly language routines with Visual C++ then - you will need an assembler. This is worth doing because it will result in - faster code: for example it will typically result in a 2 times speedup in the - RSA routines. Currently the following assemblers are supported: - - * Microsoft MASM (aka "ml") - * Free Netwide Assembler NASM. - - MASM is distributed with most versions of VC++. For the versions where it is - not included in VC++, it is also distributed with some Microsoft DDKs, for - example the Windows NT 4.0 DDK and the Windows 98 DDK. If you do not have - either of these DDKs then you can just download the binaries for the Windows - 98 DDK and extract and rename the two files XXXXXml.exe and XXXXXml.err, to - ml.exe and ml.err and install somewhere on your PATH. Both DDKs can be - downloaded from the Microsoft developers site www.msdn.com. - - NASM is freely available. Version 0.98 was used during testing: other versions - may also work. It is available from many places, see for example: - http://www.kernel.org/pub/software/devel/nasm/binaries/win32/ - The NASM binary nasmw.exe needs to be installed anywhere on your PATH. - - If you are compiling from a tarball or a CVS snapshot then the Win32 files - may well be not up to date. This may mean that some "tweaking" is required to - get it all to work. See the trouble shooting section later on for if (when?) - it goes wrong. - - Visual C++ - ---------- - - Firstly you should run Configure: - - > perl Configure VC-WIN32 - - Next you need to build the Makefiles and optionally the assembly language - files: - - - If you are using MASM then run: - - > ms\do_masm - - - If you are using NASM then run: - - > ms\do_nasm - - - If you don't want to use the assembly language files at all then run: - - > ms\do_ms - - If you get errors about things not having numbers assigned then check the - troubleshooting section: you probably won't be able to compile it as it - stands. - - Then from the VC++ environment at a prompt do: - - > nmake -f ms\ntdll.mak - - If all is well it should compile and you will have some DLLs and executables - in out32dll. If you want to try the tests then do: - - > cd out32dll - > ..\ms\test - - Tweaks: - - There are various changes you can make to the Win32 compile environment. By - default the library is not compiled with debugging symbols. If you add 'debug' - to the mk1mf.pl lines in the do_* batch file then debugging symbols will be - compiled in. Note that mk1mf.pl expects the platform to be the last argument - on the command line, so 'debug' must appear before that, as all other options. - - The default Win32 environment is to leave out any Windows NT specific - features. - - If you want to enable the NT specific features of OpenSSL (currently only the - logging BIO) follow the instructions above but call the batch file do_nt.bat - instead of do_ms.bat. - - You can also build a static version of the library using the Makefile - ms\nt.mak - - Borland C++ builder 5 - --------------------- - - * Configure for building with Borland Builder: - > perl Configure BC-32 - - * Create the appropriate makefile - > ms\do_nasm - - * Build - > make -f ms\bcb.mak - - Borland C++ builder 3 and 4 - --------------------------- - - * Setup PATH. First must be GNU make then bcb4/bin - - * Run ms\bcb4.bat - - * Run make: - > make -f bcb.mak - - GNU C (Mingw32) - --------------- - - To build OpenSSL, you need the Mingw32 package and GNU make. - - * Compiler installation: - - Mingw32 is available from . Extract it - to a directory such as C:\gcc-2.95.2 and add c:\gcc-2.95.2\bin to - the PATH environment variable in "System Properties"; or edit and - run C:\gcc-2.95.2\mingw32.bat to set the PATH. - - * Compile OpenSSL: - - > ms\mingw32 - - This will create the library and binaries in out. In case any problems - occur, try - > ms\mingw32 no-asm - instead. - - libcrypto.a and libssl.a are the static libraries. To use the DLLs, - link with libeay32.a and libssl32.a instead. - - See troubleshooting if you get error messages about functions not having - a number assigned. - - * You can now try the tests: - - > cd out - > ..\ms\test - - GNU C (Cygwin) - -------------- - - Cygwin provides a bash shell and GNU tools environment running - on NT 4.0, Windows 9x, Windows ME, Windows 2000, and Windows XP. - Consequently, a make of OpenSSL with Cygwin is closer to a GNU - bash environment such as Linux than to other W32 makes which are - based on a single makefile approach. Cygwin implements Posix/Unix - calls through cygwin1.dll, and is contrasted to Mingw32 which links - dynamically to msvcrt.dll or crtdll.dll. - - To build OpenSSL using Cygwin: - - * Install Cygwin (see http://cygwin.com/) - - * Install Perl and ensure it is in the path (recent Cygwin perl - (version 5.6.1-2 of the latter has been reported to work) or - ActivePerl) - - * Run the Cygwin bash shell - - * $ tar zxvf openssl-x.x.x.tar.gz - $ cd openssl-x.x.x - $ ./config - [...] - $ make - [...] - $ make test - $ make install - - This will create a default install in /usr/local/ssl. - - Cygwin Notes: - - "make test" and normal file operations may fail in directories - mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin - stripping of carriage returns. To avoid this ensure that a binary - mount is used, e.g. mount -b c:\somewhere /home. - - "bc" is not provided in older Cygwin distribution. This causes a - non-fatal error in "make test" but is otherwise harmless. If - desired and needed, GNU bc can be built with Cygwin without change. - - - Installation - ------------ - - If you used the Cygwin procedure above, you have already installed and - can skip this section. For all other procedures, there's currently no real - installation procedure for Win32. There are, however, some suggestions: - - - do nothing. The include files are found in the inc32/ subdirectory, - all binaries are found in out32dll/ or out32/ depending if you built - dynamic or static libraries. - - - do as is written in INSTALL.Win32 that comes with modssl: - - $ md c:\openssl - $ md c:\openssl\bin - $ md c:\openssl\lib - $ md c:\openssl\include - $ md c:\openssl\include\openssl - $ copy /b inc32\* c:\openssl\include\openssl - $ copy /b out32dll\ssleay32.lib c:\openssl\lib - $ copy /b out32dll\libeay32.lib c:\openssl\lib - $ copy /b out32dll\ssleay32.dll c:\openssl\bin - $ copy /b out32dll\libeay32.dll c:\openssl\bin - $ copy /b out32dll\openssl.exe c:\openssl\bin - - Of course, you can choose another device than c:. C: is used here - because that's usually the first (and often only) harddisk device. - Note: in the modssl INSTALL.Win32, p: is used rather than c:. - - - Troubleshooting - --------------- - - Since the Win32 build is only occasionally tested it may not always compile - cleanly. If you get an error about functions not having numbers assigned - when you run ms\do_ms then this means the Win32 ordinal files are not up to - date. You can do: - - > perl util\mkdef.pl crypto ssl update - - then ms\do_XXX should not give a warning any more. However the numbers that - get assigned by this technique may not match those that eventually get - assigned in the CVS tree: so anything linked against this version of the - library may need to be recompiled. - - If you get errors about unresolved symbols there are several possible - causes. - - If this happens when the DLL is being linked and you have disabled some - ciphers then it is possible the DEF file generator hasn't removed all - the disabled symbols: the easiest solution is to edit the DEF files manually - to delete them. The DEF files are ms\libeay32.def ms\ssleay32.def. - - Another cause is if you missed or ignored the errors about missing numbers - mentioned above. - - If you get warnings in the code then the compilation will halt. - - The default Makefile for Win32 halts whenever any warnings occur. Since VC++ - has its own ideas about warnings which don't always match up to other - environments this can happen. The best fix is to edit the file with the - warning in and fix it. Alternatively you can turn off the halt on warnings by - editing the CFLAG line in the Makefile and deleting the /WX option. - - You might get compilation errors. Again you will have to fix these or report - them. - - One final comment about compiling applications linked to the OpenSSL library. - If you don't use the multithreaded DLL runtime library (/MD option) your - program will almost certainly crash because malloc gets confused -- the - OpenSSL DLLs are statically linked to one version, the application must - not use a different one. You might be able to work around such problems - by adding CRYPTO_malloc_init() to your program before any calls to the - OpenSSL libraries: This tells the OpenSSL libraries to use the same - malloc(), free() and realloc() as the application. However there are many - standard library functions used by OpenSSL that call malloc() internally - (e.g. fopen()), and OpenSSL cannot change these; so in general you cannot - rely on CRYPTO_malloc_init() solving your problem, and you should - consistently use the multithreaded library. + + INSTALLATION ON THE WIN32 PLATFORM + ---------------------------------- + + [Instructions for building for Windows CE can be found in INSTALL.WCE] + + Heres a few comments about building OpenSSL in Windows environments. Most + of this is tested on Win32 but it may also work in Win 3.1 with some + modification. + + You need Perl for Win32. Unless you will build on Cygwin, you will need + ActiveState Perl, available from http://www.activestate.com/ActivePerl. + For Cygwin users, there's more info in the Cygwin section. + + and one of the following C compilers: + + * Visual C++ + * Borland C + * GNU C (MinGW or Cygwin) + + If you want to compile in the assembly language routines with Visual C++ then + you will need an assembler. This is worth doing because it will result in + faster code: for example it will typically result in a 2 times speedup in the + RSA routines. Currently the following assemblers are supported: + + * Microsoft MASM (aka "ml") + * Free Netwide Assembler NASM. + + MASM is distributed with most versions of VC++. For the versions where it is + not included in VC++, it is also distributed with some Microsoft DDKs, for + example the Windows NT 4.0 DDK and the Windows 98 DDK. If you do not have + either of these DDKs then you can just download the binaries for the Windows + 98 DDK and extract and rename the two files XXXXXml.exe and XXXXXml.err, to + ml.exe and ml.err and install somewhere on your PATH. Both DDKs can be + downloaded from the Microsoft developers site www.msdn.com. + + NASM is freely available. Version 0.98 was used during testing: other versions + may also work. It is available from many places, see for example: + http://www.kernel.org/pub/software/devel/nasm/binaries/win32/ + The NASM binary nasmw.exe needs to be installed anywhere on your PATH. + + If you are compiling from a tarball or a CVS snapshot then the Win32 files + may well be not up to date. This may mean that some "tweaking" is required to + get it all to work. See the trouble shooting section later on for if (when?) + it goes wrong. + + Visual C++ + ---------- + + Firstly you should run Configure: + + > perl Configure VC-WIN32 + + Next you need to build the Makefiles and optionally the assembly language + files: + + - If you are using MASM then run: + + > ms\do_masm + + - If you are using NASM then run: + + > ms\do_nasm + + - If you don't want to use the assembly language files at all then run: + + > ms\do_ms + + If you get errors about things not having numbers assigned then check the + troubleshooting section: you probably won't be able to compile it as it + stands. + + Then from the VC++ environment at a prompt do: + + > nmake -f ms\ntdll.mak + + If all is well it should compile and you will have some DLLs and executables + in out32dll. If you want to try the tests then do: + + > cd out32dll + > ..\ms\test + + Tweaks: + + There are various changes you can make to the Win32 compile environment. By + default the library is not compiled with debugging symbols. If you add 'debug' + to the mk1mf.pl lines in the do_* batch file then debugging symbols will be + compiled in. Note that mk1mf.pl expects the platform to be the last argument + on the command line, so 'debug' must appear before that, as all other options. + + The default Win32 environment is to leave out any Windows NT specific + features. + + If you want to enable the NT specific features of OpenSSL (currently only the + logging BIO) follow the instructions above but call the batch file do_nt.bat + instead of do_ms.bat. + + You can also build a static version of the library using the Makefile + ms\nt.mak + + Borland C++ builder 5 + --------------------- + + * Configure for building with Borland Builder: + > perl Configure BC-32 + + * Create the appropriate makefile + > ms\do_nasm + + * Build + > make -f ms\bcb.mak + + Borland C++ builder 3 and 4 + --------------------------- + + * Setup PATH. First must be GNU make then bcb4/bin + + * Run ms\bcb4.bat + + * Run make: + > make -f bcb.mak + + GNU C (MinGW) + ------------- + + * Compiler installation: + + MinGW is available from http://www.mingw.org. Run the installer and + set the MinGW \bin directory to the PATH in "System Properties" or + autoexec.bat. + + * Compile OpenSSL: + + > ms\mingw32 + + This will create the library and binaries in out. In case any problems + occur, try + > ms\mingw32 no-asm + instead. + + libcrypto.a and libssl.a are the static libraries. To use the DLLs, + link with libeay32.a and libssl32.a instead. + + See troubleshooting if you get error messages about functions not having + a number assigned. + + * You can now try the tests: + + > cd out + > ..\ms\test + + GNU C (Cygwin) + -------------- + + Cygwin provides a bash shell and GNU tools environment running + on NT 4.0, Windows 9x, Windows ME, Windows 2000, and Windows XP. + Consequently, a make of OpenSSL with Cygwin is closer to a GNU + bash environment such as Linux than to other W32 makes which are + based on a single makefile approach. Cygwin implements Posix/Unix + calls through cygwin1.dll, and is contrasted to MingW which links + dynamically to msvcrt.dll or crtdll.dll. + + To build OpenSSL using Cygwin: + + * Install Cygwin (see http://cygwin.com/) + + * Install Perl and ensure it is in the path (recent Cygwin perl + (version 5.6.1-2 of the latter has been reported to work) or + ActivePerl) + + * Run the Cygwin bash shell + + * $ tar zxvf openssl-x.x.x.tar.gz + $ cd openssl-x.x.x + $ ./config + [...] + $ make + [...] + $ make test + $ make install + + This will create a default install in /usr/local/ssl. + + Cygwin Notes: + + "make test" and normal file operations may fail in directories + mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin + stripping of carriage returns. To avoid this ensure that a binary + mount is used, e.g. mount -b c:\somewhere /home. + + "bc" is not provided in older Cygwin distribution. This causes a + non-fatal error in "make test" but is otherwise harmless. If + desired and needed, GNU bc can be built with Cygwin without change. + + + Installation + ------------ + + If you used the Cygwin procedure above, you have already installed and + can skip this section. For all other procedures, there's currently no real + installation procedure for Win32. There are, however, some suggestions: + + - do nothing. The include files are found in the inc32/ subdirectory, + all binaries are found in out32dll/ or out32/ depending if you built + dynamic or static libraries. + + - do as is written in INSTALL.Win32 that comes with modssl: + + $ md c:\openssl + $ md c:\openssl\bin + $ md c:\openssl\lib + $ md c:\openssl\include + $ md c:\openssl\include\openssl + $ copy /b inc32\* c:\openssl\include\openssl + $ copy /b out32dll\ssleay32.lib c:\openssl\lib + $ copy /b out32dll\libeay32.lib c:\openssl\lib + $ copy /b out32dll\ssleay32.dll c:\openssl\bin + $ copy /b out32dll\libeay32.dll c:\openssl\bin + $ copy /b out32dll\openssl.exe c:\openssl\bin + + Of course, you can choose another device than c:. C: is used here + because that's usually the first (and often only) harddisk device. + Note: in the modssl INSTALL.Win32, p: is used rather than c:. + + + Troubleshooting + --------------- + + Since the Win32 build is only occasionally tested it may not always compile + cleanly. If you get an error about functions not having numbers assigned + when you run ms\do_ms then this means the Win32 ordinal files are not up to + date. You can do: + + > perl util\mkdef.pl crypto ssl update + + then ms\do_XXX should not give a warning any more. However the numbers that + get assigned by this technique may not match those that eventually get + assigned in the CVS tree: so anything linked against this version of the + library may need to be recompiled. + + If you get errors about unresolved symbols there are several possible + causes. + + If this happens when the DLL is being linked and you have disabled some + ciphers then it is possible the DEF file generator hasn't removed all + the disabled symbols: the easiest solution is to edit the DEF files manually + to delete them. The DEF files are ms\libeay32.def ms\ssleay32.def. + + Another cause is if you missed or ignored the errors about missing numbers + mentioned above. + + If you get warnings in the code then the compilation will halt. + + The default Makefile for Win32 halts whenever any warnings occur. Since VC++ + has its own ideas about warnings which don't always match up to other + environments this can happen. The best fix is to edit the file with the + warning in and fix it. Alternatively you can turn off the halt on warnings by + editing the CFLAG line in the Makefile and deleting the /WX option. + + You might get compilation errors. Again you will have to fix these or report + them. + + One final comment about compiling applications linked to the OpenSSL library. + If you don't use the multithreaded DLL runtime library (/MD option) your + program will almost certainly crash because malloc gets confused -- the + OpenSSL DLLs are statically linked to one version, the application must + not use a different one. You might be able to work around such problems + by adding CRYPTO_malloc_init() to your program before any calls to the + OpenSSL libraries: This tells the OpenSSL libraries to use the same + malloc(), free() and realloc() as the application. However there are many + standard library functions used by OpenSSL that call malloc() internally + (e.g. fopen()), and OpenSSL cannot change these; so in general you cannot + rely on CRYPTO_malloc_init() solving your problem, and you should + consistently use the multithreaded library. -- 2.34.1