genrsa: introduce -verbose option to enable output

Other commands like 'req' support -verbose, so why not genrsa?

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6897)

Structure alignment macro.

Introduce a macro that allows all structure alignment tricks to be rolled up
into a single place.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8845)

Replumbing: give the possibility for the provider to create a context

OSSL_provider_init() gets another output parameter, holding a pointer
to a provider side context.  It's entirely up to the provider to
define the context and what it's being used for.  This pointer is
passed back to other provider functions, typically the provider global
get_params and set_params functions, and also the diverse algorithm
context creators, and of course, the teardown function.

With this, a provider can be instantiated more than once, or be
re-loaded as the case may be, while maintaining instance state.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8848)

Replumbing: make the oneshot proider cipher function like the others

The OP_cipher_final function takes a return output size and an output
buffer size argument.  The oneshot OP_cipher_cipher function should do
the same.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8849)

FIPS: Fix compiler errors in rsa_chk.c when building with `-DFIPS_MODE`

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8843)

Configure: process shared-info.pl later

The reason is that the shared-info attributes may depend on %disabled,
so we need to process all enablings/disablings first.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8846)

Squashed commit of the following:

Digest stored entropy for CRNG test.

Via the FIPS lab, NIST confirmed:

    The CMVP had a chance to discuss this inquiry and we agree that
    hashing the NDRNG block does meet the spirit and letter of AS09.42.

    However, the CMVP did have a few questions: what hash algorithm would
    be used in this application? Is it approved? Is it CAVs tested?

SHA256 is being used here and it will be both approved and CAVs tested.

This means that no raw entropy needs to be kept between RNG seedings, preventing
a potential attack vector aganst the randomness source and the DRBG chains.

It also means the block of secure memory allocated for this purpose is no longer
required.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8790)

Collapse ssl3_state_st (s3) into ssl_st

With the removal of SSLv2, the s3 structure is always allocated, so
there is little point in having it be an allocated pointer. Collapse
the ssl3_state_st structure into ssl_st and fixup any references.

This should be faster than going through an indirection and due to
fewer allocations, but I'm not seeing any significant performance
improvement; it seems to be within the margin of error in timing.

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7888)

Copy RSA-PSS saltlen in EVP_PKEY_CTX_dup.

pkey_rsa_copy was missing a field. Test this by repeating the operation
through an EVP_PKEY_CTX_dup copy in evp_test.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8759)

s390x assembly pack: remove poly1305 dependency on non-base memnonics

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8181)

s390x assembly pack: remove chacha20 dependency on non-base memnonics

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8181)

s390x assembly pack: update perlasm module

Add non-base instructions which are used by the chacha20 and
poly1305 modules.

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8181)

s390x assembly pack: allow alignment hints for vector load/store

z14 introduced alignment hints to help vector load/store
performance. For its predecessors, alignment hint defaults
to 0 (no alignment indicated).

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8181)

Statistically test BN_rand_range().

Add a Chi^2 goodness of fit test to empirically provide a degree of confidence
in the uniformity of the output of the random range generation function.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8818)

Fix error in BIO_get_ktls_send() and BIO_get_ktls_recv()

If we were using a different type of BIO than a socket BIO then
BIO_get_ktls_send() and BIO_get_ktls_recv() could return the wrong
result.

The above occurred even if KTLS was disabled at compile time - so we should
additionally ensure that those macros do nothing if KTLS is disabled.

Finally we make the logic in ssl3_get_record() a little more robust when
KTLS has been disabled.

[extended tests]

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8793)

Fix KTLS compilation error

If the kernel headers are sufficiently recent to have KTLS transmit
support, but not recent enough to have KTLS receive support then a
compilation error would be the result.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8793)

Enforce a strict output length check in CRYPTO_ccm128_tag

Return error if the output tag buffer size doesn't match
the tag size exactly. This prevents the caller from
using that portion of the tag buffer that remains
uninitialized after an otherwise succesfull call to
CRYPTO_ccm128_tag.

Bug found by OSS-Fuzz.

Fix suggested by Kurt Roeckx.

Signed-off-by: Guido Vranken <guidovranken@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8810)

doc: Get rid of unrelated reference to DSA_new()

CLA: trivial

Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8786)

added openssl app 'kdf' and 'mac' to the NEWS and CHANGES docs

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8762)

Added app for EVP_KDF

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8762)

Recognise clang -fsanitize options and translate them

Because we depend on knowing if clang's address, memory or undefinedbehavior
sanitizers are enabled, we make an extra effort to detect them among the
C flags, and adjust the %disabled values accordingly.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/8778)

Add a way for the application to get OpenSSL configuration data

OpenSSL_version(OPENSSL_DIR) gives you a nicely formatted string for
display, but if all you really want is the directory itself, you were
forced to parsed the string.

This introduces a new function to get diverse configuration data from
the library, OPENSSL_info().  This works the same way as
OpenSSL_version(), but has its own series of types, currently
including:

OPENSSL_INFO_CONFIG_DIR         returns OPENSSLDIR
OPENSSL_INFO_ENGINES_DIR        returns ENGINESDIR
OPENSSL_INFO_MODULES_DIR        returns MODULESDIR
OPENSSL_INFO_DSO_EXTENSION      returns DSO_EXTENSION

OPENSSL_INFO_DIR_FILENAME_SEPARATOR     returns directory/filename separator
OPENSSL_INFO_LIST_SEPARATOR             returns list separator

For scripting purposes, this also adds the command 'openssl info'.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8709)

Add the possibility to display and use MODULESDIR

This adds the flag OPENSSL_MODULES_DIR for OpenSSL_version(), and the
flag '-m' for 'openssl version'.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8709)

Configure: make disabling stuff easier and safer

Disabling one thing may mean having to disable other things as well.
We already have a process to auto-disable things through cascading,
but that was under-used.

Making the cascading mechanism available through a function to be
called to disable stuff makes it more automatic, and helps us when we
forget how different disabling options affect others.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8812)

Configure: recognise -static even if given through variables

Fixes #8787

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8812)

Configure: merge all of %user and %useradd into %config earlier

This came about with the realisation that upper case CFLAGS, LDFLAGS
and so on aren't treated much after that, and this makes figuring out
user added flags significantly easier, just look in %config.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8812)

If key or iv is NULL set the respective length to 0

[extended tests]

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/8794)

Fix EVP_CIPHER_CTX_rand_key()

Make sure we use the the correct key length in EVP_CIPHER_CTX_rand_key().
Now that ciphers may come from providers we need to make sure we ask the
provider for the value if appropriate.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/8794)

Fix no-ec2m

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/8792)

Fix bug in entropy gathering.

This only impacts FIPS mode or someone who has enabled the FIPS 140.2
4.9.2 Conditional Tests.  i.e. nobody currently.

Fix a significant issue in the entropy gathering for the continuous RNG
testing.  The impact is using an uninitialised buffer instead of the gathered
entropy.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/8789)

Check if num is 0 before trying to malloc memory. Otherwise for client hellos without extensions SSL_client_hello_get1_extensions_present will return MALLOC_FAILURE.

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8756)

Add some more test vectors for ChaCha20

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8780)

Clarify the documentation on the use of ChaCha20

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8780)

Create provider errors and use them

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Fix the S390X support for the basic AES ciphers

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Add forward declarations of the AES dispatch table functions

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Make implementation of blocksize, iv_length and key_length mandatory

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Add a maximum output length to update and final calls

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Add iv length and key length params to the cipher init calls

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Implement AES CTR ciphers in the default provider

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Implement AES CFB ciphers in the default provider

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Implement AES OFB ciphers in the default provider

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Implement AES CBC ciphers in the default provider

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Add support in the default provider for 192/128 bit AES ECB

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Add the provider_algs.h internal header file

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Implement support for AES-256-ECB in the default provider

We also lay the ground work for various of other the basic AES ciphers.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Make EVP_Encrypt*/EVP_Decrypt* and EVP_Cipher* provider aware

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

ossl_method_store_cache_get(): ensure non-NULL property query

The comparator further down the call stack doesn't tolerate NULL, so
if we got that as input, use the empty string.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8781)

OPENSSL_LH_flush(): assign NULL after freeing

OPENSSL_LH_flush() frees the linked lists for each slot, but didn't
set the list head to NULL after doing so, with the result that an
operation that affects these lists is likely to cause a crash.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8781)

Fix the generic EVP algorithm fetch to actually cache them

ossl_method_store_cache_get() and ossl_method_store_cache_set() were
called with a NULL argument for store, which means no caching is
done.  Give them a real store instead.

Also, increment the refcount when we do get a method out of the cache.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8781)

asn1parse: avoid double free

|str| was used for multiple conflicting purposes.  When using
'-strictpem', it's used to uniquely hold a reference to the loaded
payload.  However, when using '-strparse', |str| was re-used to hold
the position from where to start parsing.

So when '-strparse' and '-strictpem' are were together, |str| ended up
pointing into data pointed at by |at|, and was yet being freed, with
the result that the payload it held a reference to became a memory
leak, and there was a double free conflict when both |str| and |at|
were being freed.

The situation is resolved by always having |buf| hold the pointer to
the file data, and always and only use |str| to hold the position to
start parsing from.  Now, we only need to free |buf| properly and not
|str|.

Fixes #8752

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8753)

Add SSHKDF in evp_kdf_test

Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8774)

chacha/asm/chacha-armv8.pl: replace 3+1 code paths with 4+1.

The change is triggered by ThunderX2 where 3+1 was slower than scalar
code path, but it helps all processors [to handle <512 inputs].

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8776)

aes/asm/aesv8-armx.pl: ~20% improvement on ThunderX2.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8776)

ARM64 assembly pack: add ThunderX2 results.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8776)

SP 800-56B steps enumerated.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8770)

Add test for the BIO_s_mem rdwr->rdonly->rdwr use-case

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8649)

Add documentation for the BIO_s_mem pecularities

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8649)

Add testing of RDONLY memory BIOs

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8649)

Add test for the BIO_get_mem_ptr() regression

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8649)

Fix for BIO_get_mem_ptr and related regressions

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8649)

Call RSA generation callback at the correct time.

The callback should be called with 1 when a Miller-Rabin round marked
the candidate as probably prime.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
GH: #8742

Don't use '-z defs' with Clang's sanitizers

The clang documentation in all sanitizers we currently use says this:

    When linking shared libraries, the {flavor}Sanitizer run-time is
    not linked, so -Wl,-z,defs may cause link errors (don’t use it
    with {flavor}Sanitizer)

(in our case, {flavor} is one of Address, Memory, or UndefinedBehavior)

Therefore, we turn off that particular flag specifically when using
the sanitizers.

Fixes #8735

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8749)

providers/common/digests/sha2.c: forward declare all dispatched functions

Forward declare the dispatched functions using typedefs from
core_numbers.h.  This will ensure that they have correct signatures.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8747)

Providers: for the digest_final operation, pass a output buffer size

This allows the provider digest_final operation to check that it
doesn't over-run the output buffer.

The EVP_DigestFinal_ex function doesn't take that same parameter, so
it will have to assume that the user provided a properly sized buffer,
but this leaves better room for future enhancements of the public API.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8747)

Fix calling convention bug in ecp_nistz256_ord_sqr_mont

The rep parameter takes an int in C, but the assembly implementation
looks at the upper bits. While it's unlikely to happen here, where all
calls pass a constant, in other scenarios x86_64 compilers will leave
arbitrary values in the upper half.

Fix this by making the C prototype match the assembly. (This aspect of
the calling convention implies smaller-than-word arguments in assembly
functions should be avoided. There are far fewer things to test if
everything consistently takes word-sized arguments.)

This was found as part of ABI testing work in BoringSSL.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/8108)

Don't use coordinate blinding when scalar is group order

This happens in ec_key_simple_check_key and EC_GROUP_check.
Since the the group order is not a secret scalar, it is
unnecessary to use coordinate blinding.

Fixes: #8731
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8734)

Further harmonisation of manual page HISTORY sections

A couple of minor tweaks to match the style introduced in #7854:
- BIO_connect: remove line break to make more grep friendly
- SSL_CTX_new: harmoise the format of the HISTORY section

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8729)

Update various man pages to place HISTORY section after SEE ALSO

SEE ALSO before HISTORY is the more common pattern in OpenSSL manual
pages and seems to be the prevalent order based on sampling my system
manual pages.

Fixes #8631

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8729)

Add a check for history section location to find-doc-nits

Check that the HISTORY section is located after the SEE ALSO section,
this is a much more frequent order in OpenSSL manual pages (and UNIX
manual pages in general).

Also check that SEE ALSO comes after EXAMPLES, so that the tool can
ensure the correct manual section sequence.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8729)

Make check_example_location() in find-doc-nits generic

Change to check_section_location(), a generic function to ensure that
section SECTION appears before section BEFORE in the man pages.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8729)

Deprecate AES_ige_encrypt() and AES_bi_ige_encrypt()

These undocumented functions were never integrated into the EVP layer
and implement the AES Infinite Garble Extension (IGE) mode and AES
Bi-directional IGE mode. These modes were never formally standardised
and usage of these functions is believed to be very small. In particular
AES_bi_ige_encrypt() has a known bug. It accepts 2 AES keys, but only
one is ever used. The security implications are believed to be minimal,
but this issue was never fixed for backwards compatibility reasons.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8710)

Add CMAC speed measurements

usage: openssl speed -cmac aes128

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8721)

Add prediction resistance capability to the DRBG reseeding process.

Refer to NIST SP 800-90C section 5.4 "Prediction Resistance.l"

This requires the seed sources to be approved as entropy sources, after
which they should be considered live sources as per section 5.3.2 "Live
Entropy Source Availability."

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8647)

ec key validation checks updated

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8564)

doc fixups

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8555)

Separate the lookup test

This fixes the "verifying the alias" case.
Actually, while working on it, I realized that conceptually we were
testing the 2 different behaviours of `EC_GROUP_check_named_curve()` at
the same time, and actually not in the proper way.

I think it's fair to assume that overwriting the curve name for an
existing group with `NID_undef` could lead to the unexpected behaviour
we were observing and working around.
Thus I decided to separate the lookup test in a dedicated simpler test
that does what the documentation of `EC_GROUP_check_named_curve()`
suggests: the lookup functionality is meant to find a name for a group
generated with explicit parameters.

In case an alternative alias is returned by the lookup instead of the
expected nid, to avoid doing comparisons between `EC_GROUP`s with
different `EC_METHOD`s, the workaround is to retrieve the `ECPARAMETERS`
of the "alias group" and create a new explicit parameters group to use
in `EC_GROUP_cmp()`.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8555)

EC_GROUP_set_curve() might fail for arbitrary params

Setting arbitrary `p`, `a` or `b` with `EC_GROUP_set_curve()` might fail
for some `EC_GROUP`s, depending on the internal `EC_METHOD`
implementation, hence the block of tests verifying that
`EC_GROUP_check_named_curve()` fails when any of the curve parameters is
changed is modified to run only if the previous `EC_GROUP_set_curve()`
call succeeds.

`ERR_set_mark()` and `ERR_pop_to_mark()` are used to avoid littering the
thread error stack with unrelated errors happened during
`EC_GROUP_set_curve()`.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8555)

added code to validate EC named curve parameters

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8555)

Added Test::ok_nofips, Test::is_nofips & Test::isnt_nofips methods.
Used to check that a test fails in fips mode i.e. ok_nofips(run(...))

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8661)

Reseeding without derivation function is not supported in FIPS mode.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8648)

Fixed linux_x86_icc compiler errors in EC code related to __uint128_t/__int128_t

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8697)

Avoid creating invalid rsa pss params

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8621)

Fix typos

CLA: trivial

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8714)

EVP_*Update: ensure that input NULL with length 0 isn't passed

Even with custome ciphers, the combination in == NULL && inl == 0
should not be passed down to the backend cipher function.  The reason
is that these are the values passed by EVP_*Final, and some of the
backend cipher functions do check for these to see if a "final" call
is made.

Fixes #8675

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8676)

Make X509_set_sm2_id consistent with other setters

This commit makes the X509_set_sm2_id to 'set0' behaviour, which means
the memory management is passed to X509 and user doesn't need to free
the sm2_id parameter later. API name also changes to X509_set0_sm2_id.

Document and test case are also updated.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8626)

test/params_test.c : Adjust tests to check utf8_ptr sizes

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8703)

Params API: {utf8,octet}_ptr need to know the data size

When the purpose is to pass parameters to a setter function, that
setter function needs to know the size of the data passed.  This
remains true for the pointer data types as well.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8703)

Fix crash in X509_STORE_CTX_get_by_subject

If using a custom X509_LOOKUP_METHOD then calls to
X509_STORE_CTX_get_by_subject may crash due to an incorrectly initialised
X509_OBJECT being passed to the callback get_by_subject function.

Fixes #8673

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8698)

Add a legacy provider and put MD2 in it

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8541)

Use the right NID when putting a method in the store

When we attempt to fetch a method with a given NID we will ask the
providers for it if we don't already know about it. During that process
we may be told about other methods with a different NID. We need to
make sure we don't confuse the two.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8541)

Configurations/10-main.conf: Don't inherit assembler in Cygwin-common

The targets Cygwin-x86 and Cygwin-x86_64 are the ones that should do
this.

Fixes #8684

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8685)

Params: add OSSL_PARAM_construct_end()

OSSL_PARAM_END is a macro that can only be used to initialize an
OSSL_PARAM array, not to assign an array element later on.  For
completion, we add an end constructor to facilitate that kind of
assignment.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8704)

EC keygen updates + changed ecdsa_sign to use BN_secure_new

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8557)

Coverity: hkdf ENV_MD_size() is an int that can be negative

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8692)

Avoid alignment problems in params API.

Using a byte buffer causes problems for device that don't handle unaligned
reads.  Instead use the properly aligned variable that was already pointed at.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8696)

s_client starttls: fix handling of multiline reply

Fixes #8645

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8654)

coverity resource leak fixes in apps/pkeyutl

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8691)

fix --strict-warnings build

ISO C90 forbids specifying subobject to initialize

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8693)

fix --strict-warnings build

C++ style comments are not allowed in ISO C90

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8693)