Shut find up about files not found

Some of the files in $(DEPS) might not exist.  We don't need to know.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Don't free up EVP_MD_CTX.

Don't free up passed EVP_MD_CTX in ASN1_item_sign_ctx(). This
simplifies handling and retains compatiblity with previous behaviour.

PR#4446

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

Use the dependencies received in generatesrc()

generatesrc() did already receive dependency information, but never
used it, and never really needed to...  until now.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Ignore the generated apps/progs.h

Reviewed-by: Rich Salz <rsalz@openssl.org>

Generate apps/progs.h on the fly

Reviewed-by: Rich Salz <rsalz@openssl.org>

Include progs.h directly in openssl.c instead of via apps.h

Reviewed-by: Rich Salz <rsalz@openssl.org>

Make apps/progs.pl more flexible

Make Configure write @disablables to configdata.pm and have
apps/progs.pl use that data.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Correct the export list when writing configdata.pm

Reviewed-by: Rich Salz <rsalz@openssl.org>

Correct the check of files to depend on against known generated ones

The check was erroneously inversed

Reviewed-by: Rich Salz <rsalz@openssl.org>

Don't perform tsa tests if configured "no-ts"

Reviewed-by: Rich Salz <rsalz@openssl.org>

Correct incorrect path

In crypto, buildinf.h depends on ../configdata.pm, not ./configdata.pm

Reviewed-by: Rich Salz <rsalz@openssl.org>

Better 'make depend' mechanism

Instead of relying on the '-nt' test operator, which doesn't exist
everywhere, use find's '-newer' to find out if any of the known .d
files is newer than Makefile.

Closes RT#4444

Reviewed-by: Andy Polyakov <appro@openssl.org>

make update

Reviewed-by: Rich Salz <rsalz@openssl.org>

Implement support for no-ts

Reviewed-by: Rich Salz <rsalz@openssl.org>

apps/progs.pl: more consistent output for digests

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix no-des

Numerous fixes for no-des.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix no-dgram

A few places in s_client needed some OPENSSL_NO_DTLS guards which fixes
no-dgram.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix no-deprecated

The no-deprecated build was failing because afalg was relying on a
transitive include that does not exist in a no-deprecated build.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix no-cmac

There were a couple of CMAC references without OPENSSL_NO_CMAC guards.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add a test to see that signals are caught as failures

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

Make OpenSSL::Test::run() sensitive to signals

$? in perl gets the status value from wait(2), which is a word with
the exit code in the upper half and the number of a raised signal in
the lower half.  OpenSSL::Test::run() ignored the signal half up until
now.

With this change, we recalculate an exit code the same way the Unix
shells do, using this formula:

    ($? & 0x7f) ? ($? & 0x7f)|0x80 : ($? >> 8);

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

Remove more unused things.

Moved doc/standards.txt to the web.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Resolved unresolved symbols with no-hw

Compiling on Windows with no-hw was resulting in unresolved symbols
in the padlock engine.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Ensure that no-comp functions are flagged as such

mkdef.pl was not detecting no-comp functions. This updates the header file
so that mkdef.pl detects that no-comp applies, and the functions are marked
accordingly.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix no-rc2 in the CMS test

The CMS test uses some RC2 keys which should be skipped if the RC2 is
disabled.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Mark OCB as an AEAD cipher

OCB is AEAD capable but was not marked as such with the
EVP_CIPH_FLAG_AEAD_CIPHER flag.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Ensure that memory allocated for the ticket is freed

If a call to EVP_DecryptUpdate fails then a memory leak could occur.
Ensure that the memory is freed appropriately.

Issue reported by Guido Vranken.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix a potential double free in EVP_DigestInit_ex

There is a potential double free in EVP_DigestInit_ex. This is believed
to be reached only as a result of programmer error - but we should fix it
anyway.

Issue reported by Guido Vranken.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix build; CPP syntax error.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Update EVP_CIPHER_CTX_set_padding documentation.

Add note about when EVP_CIPHER_CTX_set_padding should be called.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

README: small fixups

Don't refer to INSTALL files that don't exist any more.
Make it clear that the libssl and libcrypto libraries may be named
differently on different platforms.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Make picker, thread and combine standard config helper functions

Document them as well

Reviewed-by: Andy Polyakov <appro@openssl.org>

Remove Netware and OS/2

Reviewed-by: Richard Levitte <levitte@openssl.org>

Disallow --classic for Windows

With all the config changes, mk1mf is broken on Windows.

Reviewed-by: Rich Salz <rsalz@openssl.org>

windows-makefile.tmpl: Stop keeping temporary files

Reviewed-by: Andy Polyakov <appro@openssl.org>

Add install targets for Windows

On Windows, we set INSTALLTOP to default as follows:

  VC-WIN32:

    PREFIX:     %ProgramFiles(x86)%\OpenSSL
    OPENSSLDIR: %CommonProgramFiles(x86)%\SSL

  VC-WIN64*:

    PREFIX:     %ProgramW6432%\OpenSSL
    OPENSSLDIR: %CommonProgramW6432%\SSL

Should those environment variables be missing, the following is used
as fallback:

    PREFIX:     %ProgramFiles%\OpenSSL
    OPENSSLDIR: %CommonProgramFiles%\SSL

Reviewed-by: Andy Polyakov <appro@openssl.org>

Report TLS 1.0 as backwards-compatible TLSv1

The TLSv1.0 form is retained for reporting the first protocol version
that supports a given cupher.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove ultrix/mips support.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove support for Borland C++

Borland C++ 4.5 is very old and our "support" for it is already
non-existent, we might as well remove it.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Use correct C format for keysets.pl

Reviewed-by: Richard Levitte <levitte@openssl.org>

Start documenting Configure internals

This is a living document, everyone is encouraged to add to it.
Implementation details as well as broader implementation philosophy
has a place here.

I'm starting with documentation of the how conditions in build.info
files are treated.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Added build.info debugging capability to Configure

This is only enabled when the environment variable
CONFIGURE_DEBUG_BUILDINFO is defined.  This will cause every line in
every build.info file to be displayed, along with the content of the
skip stack before and after parsing.  This can be a very powerful tool
to see that all conditions are working as expected.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Simplify define as we don't support MS-DOS anymore.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Don't define OPENSSL_ENGINES in test recipes, do it in Makefiles instead

In most builds, we can assume that engines live in the build tree
subdirectory "engines".  This was hard coded into the tests that use
the engine ossltest.

However, that hard coding is tedious, it would need to be done in
every test recipe, and it's an incorrect assumption in some cases.

This change has us play it safe and let the build files tell the
testing framework where the engines are.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Have 'openssl version -a' output the default engines directory as well

Reviewed-by: Rich Salz <rsalz@openssl.org>

Bugfix: Encode the requested length in s_cb.c:hexencode()

Reviewed-by: Rich Salz <rsalz@openssl.org>

Sort cipher-list at runtime.

Reduces #ifdef complexity.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

unix-Makefile template: use $(PERL) everywhere

There was one spot that had hard-coded 'perl'

Reviewed-by: Rich Salz <rsalz@openssl.org>

Deal with DSA_SIG opaqueness.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Prepare for 1.1.0-pre5-dev

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Prepare for 1.1.0-pre4 release

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Some platforms provide getcontext() but it does not work

Some platforms claim to be POSIX but their getcontext() implementation
does not work. Therefore we update the ASYNC_is_capable() function to test
for this.

RT#4366

Reviewed-by: Richard Levitte <levitte@openssl.org>

When building DLLs, hack the library name in the .def file

util/mkdef.pl assumes it knows what the resulting library name will
be.  Really, it shouldn't, but changing it will break classic native
Windows builds, so we leave it for now and change the LIBRARY line
externally when needed instead.

Reviewed-by: Matt Caswell <matt@openssl.org>

DLL object files should not be built with /Zl"

When building the DLLs, we depend on the correct default C RTL info.

Reviewed-by: Matt Caswell <matt@openssl.org>

Appveyor - make sure to actually build "shared" in the shared configuration

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix up CHANGES

- Remove duplicate entry
- Add author for SSL_CIPHER query functions
- Note HKDF support in CHANGES and NEWS

[ci skip]

Reviewed-by: Richard Levitte <levitte@openssl.org>

We should use $SRCDIR in Makefiles

Normally we always refer to source files relative to $SRCDIR in Makefiles.
However the reference to unix-Makefile.tmpl was using a fully expanded
absolute path. This can cause problems for Mingw.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Disable AFALG when cross-compiling

We don't currently support cross-compiling of the afalg engine. However
we were failing to explicitly mark it as disabled during Configure leading
to a failed build.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix a TLSProxy race condition

TLSProxy starts s_server and specifies the number of client connects
it should expect. After that s_server is supposed to close down
automatically. However, if another test is then run then TLSProxy
will start a new instance of s_server. If the previous instance
hasn't closed down yet then the new instance can fail to bind to
the socket.

Reviewed-by: Richard Levitte <levitte@openssl.org>

poly1305/asm/poly1305-x86_64.pl: make it work with linux-x32.

Reviewed-by: Richard Levitte <levitte@openssl.org>

On Windows, page walking is known as __chkstk.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Explain *cough*-dows

Reviewed-by: Andy Polyakov <appro@openssl.org>

Make the perl dependency post-processor into just one line

Make doesn't always treat multiline quoted strings as nicely as one
would wish.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Not all shells understand !

In unix-Makefile.tmpl, this construction has been used a few times

if ! something; then ...

It seems, though, that some shells do not understand !, so these need
to be changed.

Reviewed-by: Rich Salz <rsalz@openssl.org>

General verify options to openssl ts

This commit adds the general verify options of ocsp, verify,
cms, etc. to the openssl timestamping app as suggested by
Stephen N. Henson in [openssl.org #4287]. The conflicting
"-policy" option of "openssl ts" has been renamed to
"-tspolicy". Documentation and tests have been updated.

CAVE: This will break code, which currently uses the "-policy"
option.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix CRYPTO_THREAD_run_once return value checks

Reviewed-by: Richard Levitte <levitte@openssl.org>

Cygwin configs were missing thread_scheme settings, add them

Reviewed-by: Matt Caswell <matt@openssl.org>

Small typo

OPENSSL_INIT_ONCE and OPENSSL_INIT_ONCE_STATIC_INIT are really
CRYPTO_ONCE and CRYPTO_ONCE_STATIC_INIT.

Reviewed-by: Rich Salz <rsalz@openssl.org>

static-engine is no longer an internal keyword, remove it from %disabled

Reviewed-by: Rich Salz <rsalz@openssl.org>

Clarify NOTES.WIN.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Update and clarify ECDSA documentation.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Disable afalg when engine is disabled.

Also make it possible to disable afalg separately.

we still need to update config again

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix typo in manual, missing ending '>'

Reviewed-by: Stephen Henson <steve@openssl.org>

Travis: build tests in BUILDONLY mode

Reviewed-by: Richard Levitte <levitte@openssl.org>

config: fix HP-UX PA-RISC detection.

Reviewed-by: Richard Levitte <levitte@openssl.org>

s390x assembly pack: 32-bit fixups.

Reviewed-by: Richard Levitte <levitte@openssl.org>

build.info/Makefile.in: Itanium fixups.

Reviewed-by: Richard Levitte <levitte@openssl.org>

engines/Makefile.in: some [older] shell complain about 'for i ;',
but not if there is reference to empty variable.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix the init cleanup order

There are internal dependencies between the various cleanup functions.
This re-orders things to try and get that right.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Add some missing cleanup calls to de-init

OBJ_cleanup() doesn't always get called from EVP_cleanup() so needs to be
explicitly called in de-init. Also BIO_sock_cleanup() also needs to be
called.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix freeze in config's interrupt trap with some shells

With bash and zsh, the trap on the 5 second read does respond, but
doesn't break out of the read.  What's worse is that it takes away the
5 second timer, and therefore has the read hang indefinitely and
(almost) unbreakable.

Having the trap do 'exit 0' after reseting the tty params has it break
out of read and continue with the configuration.

Other shells do not appear to have the issue described here, but
neither does the extra 'exit 0' appear to harm them.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Enforce the demand for Perl 5.10.0 as a minimum.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Fix a few Configure errors

Reviewed-by: Andy Polyakov <appro@openssl.org>

Document X509_get_serialNumber and X509_set_serialNumber.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Add EVP_PKEY documentation.

Document EVP_PKEY_id() and EVP_PKEY_base_id().

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Change an function macro for ERR match the function it's used in.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Complete incomplete makefile variable referenses

A couple of '$(PERLASM_SCHEM' had sneaked in.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Collect the names of generated files and clean them away at target clean:

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add $(LIB_CFLAGS) for any build.info generator that uses $(CFLAGS)

The reason to do so is that some of the generators detect PIC flags
like -fPIC and -KPIC, and those are normally delivered in LD_CFLAGS.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Use single quotes rather than double quotes when needed

When passing down values to Makefile.shared, do so with single quotes
as much as possible to avoid having the shell create a mess of quotes.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Harmonize Unix Makefile template with Windows dito

The variable SHARED_CFLAGS and SHARD_LDFLAGS were used in the Unix
template because they normally contain options used when building
"shared".  The Windows template, on the other hand, uses LIB_CFLAGS,
to express the intended use of those flags rather than their content.
The Windows template still used SHARED_LDFLAGS, which seems
inconsistent.

To harmonize the two, any SHARED_CFLAGS gets renamed to LIB_CFLAGS and
SHARED_LDFLAGS to LIB_LDFLAGS.  That makes the intent consistent along
with BIN_{C,LD}FLAGS and DSO_{C,LD}FLAGS.

Finally, make sure to pass down $(LIB_CFLAGS) or $(DSO_CFLAGS) along
with $(CFLAGS) when using Makefile.shared.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix memory leak in library deinit

ENGINE_cleanup calls CRYPTO_free_ex_data and therefore,
CRYPTO_cleanup_all_ex_data - which cleans up the method pointers - must
run after ENGINE_cleanup.

Additionally, don't needlessly initialize the EX_CALLBACKS stack during
e.g. CRYPTO_free_ex_data. The only time this is actually needed is when
reserving the first ex data index. Specifically, since sk_num returns -1
on NULL input, the rest of the code already handles a NULL method stack
correctly.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add doc on when to use SCT callback.

With help from Viktor.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Workaround for false -Warray-bounds in Travis

ccache + clang produces a false strcmp warning, see
https://llvm.org/bugs/show_bug.cgi?id=20144

Since this only happens with ccache and --strict-warnings, and
only with certain versions of glibc / clang, disabling
ccache is a reasonable short-term workaround.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix no-comp build

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix build break; add function declaration

Reviewed-by: Richard Levitte <levitte@openssl.org>

When creating directory specs, use srctop_dir rather than srctop_file.

While insignificant on Unix like systems, this is significant on
systems like VMS.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>

Avoid sed for dependency post-processing

It turns out that different sed implementations treat -i differently
to cause issues.  make it simpler by avoiding it entirely and give
perl the trust to be consistent enough.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Because bn_expand2 is declared non-static, it must not be static

That doesn't change even to make a dummy to hide its unavailability.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove some dead code from 1999

Reviewed-by: Richard Levitte <levitte@openssl.org>