Add new /dev/crypto engine

Based on cryptodev-linux

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3744)

Add the common error ERR_R_OPERATION_FAIL

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3744)

Use randomness not entropy

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3773)

Fix return-value checks in OCSP_resp_get1_id()

Commit db17e43d882ecde217e1dce4a2b8c76c3ed134bf added the function
but would improperly report success if the underlying dup operation
failed.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3775)

util/mkerr.pl: avoid getting an annoying warning about negative count

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3781)

util/mkerr.pl: allow module names prefixed with OSSL_ or OPENSSL_

To make sure that our symbols don't clash with other libraries, we
claim the namespaces OSSL and OPENSSL.  Because C doesn't provide
namespaces, the only solution is to have them as prefixes on symbols,
thus we allow OSSL_ and OPENSSL_ as prefixes.

These namespace prefixes are optional for the foreseeable future, and
will only be used for new modules as needed on a case by case basis,
until further notice.

For extra safety, there's an added requirement that module names -
apart from the namespace prefix - be at least 2 characters long.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3781)

Rename static global "lock" to "obj_lock"

Breaks djgpp, masks a common kernel function name.
Thanks to Gisle Vanem for pointing this out.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3776)

Change to check last return value of BN_CTX_get

To make it consistent in the code base

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3749)

Fix return value checking for BIO_sock_init

BIO_sock_init returns '-1' on error, not '0', so it's needed to check
explicitly istead of using '!'.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3766)

Fix inaccurate comments in bn_prime.c

As well as a coding style nit is fixed.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3763)

tsget.in: remove call of WWW::Curl::Easy::global_cleanup

This function is undocumented, but similarly named functions (such as
'curl_global_cleanup') are documented as internals that should not be
called by scripts.

Fixes #3765

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3768)

Fix no-dsa build again

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3762)

Add tests for deprecated sigalgs with TLS 1.3 ClientHellos

Test for each of DSA, SHA1, and SHA224.

Use the symbolic names for SignatureScheme comparisons just added.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3326)

Fix no-dsa build

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3326)

Add constants for TLS 1.3 SignatureScheme values

Put them into the TLSProxy::Message namespace along with the extension
type constants.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3326)

Disallow DSA/SHA1/etc. for pure TLS 1.3 ClientHellos

In draft-ietf-tls-tls13-20 Appendix B we find that:

   This section describes protocol types and constants.  Values listed
   as _RESERVED were used in previous versions of TLS and are listed
   here for completeness.  TLS 1.3 implementations MUST NOT send them
   but might receive them from older TLS implementations.

Similarly, in section 4.2.3 we see:

   Legacy algorithms  Indicates algorithms which are being deprecated
      because they use algorithms with known weaknesses, specifically
      SHA-1 which is used in this context with either with RSA using
      RSASSA-PKCS1-v1_5 or ECDSA.  These values refer solely to
      signatures which appear in certificates (see Section 4.4.2.2) and
      are not defined for use in signed TLS handshake messages.
      Endpoints SHOULD NOT negotiate these algorithms but are permitted
      to do so solely for backward compatibility.  Clients offering
      these values MUST list them as the lowest priority (listed after
      all other algorithms in SignatureSchemeList).  TLS 1.3 servers
      MUST NOT offer a SHA-1 signed certificate unless no valid
      certificate chain can be produced without it (see
      Section 4.4.2.2).

However, we are currently sending the SHA2-based DSA signature schemes
and many SHA1-based schemes, which is in contradiction with the specification.

Because TLS 1.3 support will appear in OpenSSL 1.1, we are bound by
stability requirements to continue to offer the DSA signature schemes
and the deprecated hash algorithms.  at least until OpenSSL 1.2.
However, for pure TLS 1.3 clients that do not offer lower TLS versions,
we can be compliant.  Do so, and leave a note to revisit the issue when
we are permitted to break with sacred historical tradition.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3326)

sha/asm/keccak1600-mmx.pl: optimize for Atom and add comparison data.

Curiously enough out-of-order Silvermont benefited most from
optimization, 33%. [Originally mentioned "anomaly" turned to be
misreported frequency scaling problem. Correct results were
collected under older kernel.]

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3739)

Add sha/asm/keccak1600-mmx.pl, x86 MMX module.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3739)

Fix a memory leak in the new TAP filter BIO

[extended tests]

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3760)

Fix travis clang-3.9 builds

Something environmental changed in travis so that it started preferring
the ubuntu clang-3.9 version instead of the llvm.org one. This breaks the
sanitiser based builds. This change forces travis to de-prioritise the
ubuntu clang packages.

[extended tests]

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3759)

Fix another EVP_DigestVerify() instance

Following on from the previous commit this fixes another instance where
we need to treat a -ve return from EVP_DigestVerify() as a bad signature.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3756)

Treat all failures from EVP_DigestVerify() as a bad signature

Prior to 72ceb6a we treated all failures from the call to
EVP_DigestVerifyFinal() as if it were a bad signature, and failures in
EVP_DigestUpdate() as an internal error. After that commit we replaced
this with the one-shot function EVP_DigestVerify() and treated a 0 return
as a bad signature and a negative return as an internal error. However,
some signature errors can be negative (e.g. according to the docs if the
form of the signature is wrong). Therefore we should treat all <=0
returns as a bad signature.

This fixes a boringssl test failure.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3756)

Fix the constant time 64 test

We were adding more tests than we had data for due to use of
sizeof instead of OSSL_NELEM. I also changed the 8 bit tests
for consistency, although they were already working.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3755)

Remove uses of the TEST_check macro.

This macro aborts the test which prevents later tests from executing.  It also
bypasses the test framework output functionality.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3750)

Fix OBJ_create() to tolerate a NULL sn and ln

In 1.0.2 and before OBJ_create() allowed the sn or ln parameter to be NULL.
Commit 52832e47 changed that so that it crashed if they were NULL.

This was causing problems with the built-in config oid module. If a long
name was provided OBJ_create() is initially called with a NULL ln and
therefore causes a crash.

Fixes #3733

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3753)

Fix tls1_generate_master_secret

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3751)

Fix the names of ChaCha20-Poly1305 cipher suites in t1_trce.c.

Per RFC 7905, the cipher suite names end in "_SHA256". The original
implementation targeted the -03 draft, but there was a -04 draft right
before the RFC was published to make the names consistent.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3748)

TAP line filter BIO.

This is an implementation of a BIO filter that produce TAP compatible output
for the test framework.  The current test indentation level is honoured.

The test output functions have been modified to not attempt to indent
their output and to not include the leading '#' character.

The filter is applied to bio_err only.  bio_out is left unchanged, although
tests using bio_out have been modified to use bio_err instead.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3732)

Configure: give config targets the possibility to enable or disable features

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3745)

Remove duplicate see also reference to BIO_s_mem.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3731)

Add OCSP_resp_get1_id() accessor

Adding a get1 style accessor as brought up in mailing list post
https://mta.openssl.org/pipermail/openssl-users/2016-November/004796.html

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1876)

Avoid compiler complaining

initialize some local variables

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3741)

Add documentation for the SSL_export_keying_material() function

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3735)

sha/asm/sha512p8-ppc.pl: add POWER8 performance data.

[skip ci]

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3705)

Add Keccak-1600 modules for PPC64 and POWER8.

[skip ci]

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3705)

Fix DTLS failure when used in a build which has SCTP enabled

The value of BIO_CTRL_DGRAM_SET_PEEK_MODE was clashing with the value for
BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE. In an SCTP enabled build
BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE was used unconditionally with
the reasoning that it would be ignored if SCTP wasn't in use. Unfortunately
due to this clash, this wasn't the case. The BIO ended up going into peek
mode and was continually reading the same data over and over - throwing it
away as a replay.

Fixes #3723

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3724)

PSK related tweaks based on review feedback

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Use constants rather than macros for the cipher bytes in the apps

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add some tests for the new TLSv1.3 PSK code

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Fix some bugs in the TLSv1.3 PSK code

Found while developing the PSK tests

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Make the input parameters for SSL_SESSION_set1_master_key const

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Document SSL_set_psk_find_session_callback() and SSL_CTX equivalent

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Document SSL_set_psk_use_session_callback() and SSL_CTX equivalent

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Tweak the client side PSK callback

Ensure that we properly distinguish between successful return (PSK
provided), successful return (no PSK provided) and failure.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add documentation for SSL_CTX_set_psk_use_session_callback()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Document SSL_CIPHER_get_handshake_digest()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Document SSL_SESSION_set_protocol_version()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Document SSL_SESSION_set1_master_key()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add documentation for SSL_SESSION_set_cipher()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Fix no-psk

Broken through previous PSK related commits

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add the ability to set a TLSv1.3 PSK via just the key bytes

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add SSL_SESSION_set_protocol_version()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add SSL_SESSION_set_cipher()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add SSL_SESSION_set1_master_key()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add the ability to use a server side TLSv1.3 external PSK in s_server

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add the ability to use a client side TLSv1.3 external PSK in s_client

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add a function to get the handshake digest for an SSL_CIPHER

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add public API functions for setting TLSv1.3 PSK callbacks

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add TLSv1.3 client side external PSK support

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add TLSv1.3 server side external PSK support

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add ecstress test

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3720)

Add sha/asm/keccak1600-c64x.pl

[skip ci]

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3708)

Add constant-time 64

Standardize comments.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3727)

Use EVP_PKEY_X25519, EVP_PKEY_ED25519 instead of NIDs where appropriate.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Update test config file

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Add Ed25519 TLS 1.3 and 1.2 tests

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Add Ed25519 EE certificates

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Ed25519 support for mkcert.sh

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Allow Ed25519 in TLS 1.2

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Convert key exchange to one shot call

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Print Ed25519 in s_client/s_server

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Add Ed25519 to trace output

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Handle signature algorithms with no associated digest

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Add Ed25519 signature algorithm

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Add Ed25519 to signature algorithm table

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Add index for ED25519

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Use X509_get_signature_info to get signature strength.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Recognise Ed25519 in X509_certificate_type

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Merge Nokia copyright notice into standard

This is done with the kind permission of Nokia.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3722)

Reformat progs.pl; add ARIA support

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3726)

Remove OSSLzu macros and use %zu in the test framework (via BIO_printf).

Convert the debug prints in dtls_mtu_test.c to use the framework.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3730)

Ensure a space after colon in enc -v

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3725)

Add parentheses around macro argument of OSSL_NELEM.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3039)

Modify Sun copyright to follow OpenSSL style

Approved by Oracle.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3585)

Declare a new x509v3 extension: x509ExtAdmission

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2759)

Fix typo (note by oneton@users.github)

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3716)

Add RAND_UNIMPLEMENTED error code

See old GitHub PR 38.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3714)

Make clear error message if opt_<number> fails

for opt_long(opt_int)/opt_ulong/opt_imax/opt_umax

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3653)

Address style issues.
Refactor count -> c which makes the for loop more readable.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3710)

Address double error and OSSLzu comments.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3710)

Put error output back.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3710)

Update tests to avoid printf to stdout/stderr when running as test cases.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3710)

Remove bsd_cryptodev engine

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3699)

Fix the fall-out in 04-test_bioprint.t

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3712)

Fix the error handling in ERR_get_state:
- Ignoring the return code of ossl_init_thread_start created a memory leak.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3712)

Fix preprocessor indentation.
Rework main() to be in the style of the other conditional tests.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3711)

s_client accepts host/port as positional argument.

This allows the user to provide the target host and optional port to
openssl s_client as an optional positional argument, rather than as the
argument to the -connect flag. This rationalises the user experience of
s_client: given that the only logical purpose of s_client is to connect
to a host, it is difficult to understand why there is an (effectively
mandatory) command option to pass to make that happen.

This patch forbids providing *both* -connect and the positional
argument, because it would likely be too difficult to reconcile.
Otherwise, using the positional argument behaves exactly the same as
using -connect does.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1171)

Remove non-accurate description in Configure script

For DES and 3DES based ciphers are also enabled by this option.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3707)

Fix va_list processing in test_note()

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3704)

Remove a pointless "#if 0" block from BN_mul.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3683)