aesv8-armx.pl: inclrease interleave factor.
authorAndy Polyakov <appro@openssl.org>
Tue, 24 Jun 2014 06:08:58 +0000 (08:08 +0200)
committerAndy Polyakov <appro@openssl.org>
Tue, 24 Jun 2014 06:10:37 +0000 (08:10 +0200)
This is to compensate for higher aes* instruction latency on Cortex-A57.
(cherry picked from commit 015364baf3328b93dbed2613e59170715a2a11a6)

crypto/aes/asm/aesv8-armx.pl

index 415dc04a23d387348d165c1a9931ce0c481b238d..87fe446b30b16df8ed573d6bd842491510b1d5ee 100755 (executable)
 # module is endian-agnostic in sense that it supports both big- and
 # little-endian cases. As does it support both 32- and 64-bit modes
 # of operation. Latter is achieved by limiting amount of utilized
-# registers to 16, which implies additional instructions. This has
-# no effect on mighty Apple A7, as results are literally equal to
-# the theoretical estimates based on instruction latencies and issue
-# rate. It remains to be seen how does it affect other platforms...
+# registers to 16, which implies additional NEON load and integer
+# instructions. This has no effect on mighty Apple A7, where results
+# are literally equal to the theoretical estimates based on AES
+# instruction latencies and issue rates. On Cortex-A53, an in-order
+# execution core, this costs up to 10-15%, which is partially
+# compensated by implementing dedicated code path for 128-bit
+# CBC encrypt case. On Cortex-A57 parallelizable mode performance
+# seems to be limited by sheer amount of NEON instructions...
 #
 # Performance in cycles per byte processed with 128-bit key:
 #
 #              CBC enc         CBC dec         CTR
 # Apple A7     2.39            1.20            1.20
-# Cortex-A5x   n/a             n/a             n/a
+# Cortex-A53   2.45            1.87            1.94
+# Cortex-A57   3.64            1.34            1.32
 
 $flavour = shift;
 open STDOUT,">".shift;
@@ -435,189 +440,166 @@ $code.=<<___;
 
        vst1.8  {$ivec},[$out],#16
        b       .Lcbc_done
-
-.align 5
-.Lcbc_dec128:
-       vld1.32 {$tmp0-$tmp1},[$key_]
-       veor    $ivec,$ivec,$rndlast
-       veor    $in0,$dat0,$rndlast
-       mov     $step1,$step
-
-.Loop2x_cbc_dec128:
-       aesd    $dat0,q8
-       aesd    $dat1,q8
-       aesimc  $dat0,$dat0
-       aesimc  $dat1,$dat1
-        subs   $len,$len,#32
-       aesd    $dat0,q9
-       aesd    $dat1,q9
-       aesimc  $dat0,$dat0
-       aesimc  $dat1,$dat1
-        cclr   $step,lo
-       aesd    $dat0,$tmp0
-       aesd    $dat1,$tmp0
-       aesimc  $dat0,$dat0
-       aesimc  $dat1,$dat1
-        cclr   $step1,ls
-       aesd    $dat0,$tmp1
-       aesd    $dat1,$tmp1
-       aesimc  $dat0,$dat0
-       aesimc  $dat1,$dat1
-       aesd    $dat0,q10
-       aesd    $dat1,q10
-       aesimc  $dat0,$dat0
-       aesimc  $dat1,$dat1
-       aesd    $dat0,q11
-       aesd    $dat1,q11
-       aesimc  $dat0,$dat0
-       aesimc  $dat1,$dat1
-       aesd    $dat0,q12
-       aesd    $dat1,q12
-       aesimc  $dat0,$dat0
-       aesimc  $dat1,$dat1
-       aesd    $dat0,q13
-       aesd    $dat1,q13
-       aesimc  $dat0,$dat0
-       aesimc  $dat1,$dat1
-       aesd    $dat0,q14
-       aesd    $dat1,q14
-       aesimc  $dat0,$dat0
-       aesimc  $dat1,$dat1
-       aesd    $dat0,q15
-       aesd    $dat1,q15
-
-       veor    $ivec,$ivec,$dat0
-       vld1.8  {$dat0},[$inp],$step
-       veor    $in0,$in0,$dat1
-       vld1.8  {$dat1},[$inp],$step1
-       vst1.8  {$ivec},[$out],#16
-       veor    $ivec,$in1,$rndlast
-       vst1.8  {$in0},[$out],#16
-       veor    $in0,$dat0,$rndlast
-       vorr    $in1,$dat1,$dat1
-       b.hs    .Loop2x_cbc_dec128
-
-       adds    $len,$len,#32
-       veor    $ivec,$ivec,$rndlast
-       b.eq    .Lcbc_done
-       veor    $in0,$in0,$rndlast
-       b       .Lcbc_dec_tail
-
+___
+{
+my ($dat2,$in2,$tmp2)=map("q$_",(10,11,9));
+$code.=<<___;
 .align 5
 .Lcbc_dec:
-       subs    $len,$len,#16
-       vorr    $in0,$dat,$dat
+       vld1.8  {$dat2},[$inp],#16
+       subs    $len,$len,#32           // bias
+       add     $cnt,$rounds,#2
+       vorr    $in1,$dat,$dat
+       vorr    $dat1,$dat,$dat
+       vorr    $in2,$dat2,$dat2
        b.lo    .Lcbc_dec_tail
 
-       cclr    $step,eq
-       cmp     $rounds,#2
-       vld1.8  {$dat1},[$inp],$step
+       vorr    $dat1,$dat2,$dat2
+       vld1.8  {$dat2},[$inp],#16
+       vorr    $in0,$dat,$dat
        vorr    $in1,$dat1,$dat1
-       b.eq    .Lcbc_dec128
+       vorr    $in2,$dat2,$dat2
 
-.Loop2x_cbc_dec:
+.Loop3x_cbc_dec:
        aesd    $dat0,q8
        aesd    $dat1,q8
+       aesd    $dat2,q8
        vld1.32 {q8},[$key_],#16
        aesimc  $dat0,$dat0
        aesimc  $dat1,$dat1
+       aesimc  $dat2,$dat2
        subs    $cnt,$cnt,#2
        aesd    $dat0,q9
        aesd    $dat1,q9
+       aesd    $dat2,q9
        vld1.32 {q9},[$key_],#16
        aesimc  $dat0,$dat0
        aesimc  $dat1,$dat1
-       b.gt    .Loop2x_cbc_dec
+       aesimc  $dat2,$dat2
+       b.gt    .Loop3x_cbc_dec
 
        aesd    $dat0,q8
        aesd    $dat1,q8
+       aesd    $dat2,q8
+        veor   $tmp0,$ivec,$rndlast
        aesimc  $dat0,$dat0
        aesimc  $dat1,$dat1
-        veor   $tmp0,$ivec,$rndlast
+       aesimc  $dat2,$dat2
         veor   $tmp1,$in0,$rndlast
        aesd    $dat0,q9
        aesd    $dat1,q9
+       aesd    $dat2,q9
+        veor   $tmp2,$in1,$rndlast
+        subs   $len,$len,#0x30
        aesimc  $dat0,$dat0
        aesimc  $dat1,$dat1
-        vorr   $ivec,$in1,$in1
-        subs   $len,$len,#32
-       aesd    $dat0,q10
-       aesd    $dat1,q10
-       aesimc  $dat0,$dat0
-        cclr   $step,lo
-       aesimc  $dat1,$dat1
-        mov    $key_,$key
-       aesd    $dat0,q11
-       aesd    $dat1,q11
-       aesimc  $dat0,$dat0
-        vld1.8 {$in0},[$inp],$step
-       aesimc  $dat1,$dat1
-        cclr   $step,ls
+       aesimc  $dat2,$dat2
+        vorr   $ivec,$in2,$in2
+        mov.lo x6,$len                 // x6, $cnt, is zero at this point
        aesd    $dat0,q12
        aesd    $dat1,q12
+       aesd    $dat2,q12
+        add    $inp,$inp,x6            // $inp is adjusted in such way that
+                                       // at exit from the loop $dat1-$dat2
+                                       // are loaded with last "words"
        aesimc  $dat0,$dat0
        aesimc  $dat1,$dat1
-        vld1.8 {$in1},[$inp],$step
+       aesimc  $dat2,$dat2
+        mov    $key_,$key
        aesd    $dat0,q13
        aesd    $dat1,q13
+       aesd    $dat2,q13
+        vld1.8 {$in0},[$inp],#16
        aesimc  $dat0,$dat0
        aesimc  $dat1,$dat1
-        vld1.32 {q8},[$key_],#16       // re-pre-load rndkey[0]
+       aesimc  $dat2,$dat2
+        vld1.8 {$in1},[$inp],#16
        aesd    $dat0,q14
        aesd    $dat1,q14
+       aesd    $dat2,q14
+        vld1.8 {$in2},[$inp],#16
        aesimc  $dat0,$dat0
        aesimc  $dat1,$dat1
-        vld1.32 {q9},[$key_],#16       // re-pre-load rndkey[1]
+       aesimc  $dat2,$dat2
+        vld1.32 {q8},[$key_],#16       // re-pre-load rndkey[0]
        aesd    $dat0,q15
        aesd    $dat1,q15
+       aesd    $dat2,q15
 
-        mov    $cnt,$rounds
+        add    $cnt,$rounds,#2
        veor    $tmp0,$tmp0,$dat0
        veor    $tmp1,$tmp1,$dat1
+       veor    $dat2,$dat2,$tmp2
+        vld1.32 {q9},[$key_],#16       // re-pre-load rndkey[1]
         vorr   $dat0,$in0,$in0
        vst1.8  {$tmp0},[$out],#16
         vorr   $dat1,$in1,$in1
        vst1.8  {$tmp1},[$out],#16
-       b.hs    .Loop2x_cbc_dec
+       vst1.8  {$dat2},[$out],#16
+        vorr   $dat2,$in2,$in2
+       b.hs    .Loop3x_cbc_dec
 
-       adds    $len,$len,#32
+       cmn     $len,#0x30
        b.eq    .Lcbc_done
+       nop
 
 .Lcbc_dec_tail:
-       aesd    $dat,q8
+       aesd    $dat1,q8
+       aesd    $dat2,q8
        vld1.32 {q8},[$key_],#16
-       aesimc  $dat,$dat
+       aesimc  $dat1,$dat1
+       aesimc  $dat2,$dat2
        subs    $cnt,$cnt,#2
-       aesd    $dat,q9
+       aesd    $dat1,q9
+       aesd    $dat2,q9
        vld1.32 {q9},[$key_],#16
-       aesimc  $dat,$dat
+       aesimc  $dat1,$dat1
+       aesimc  $dat2,$dat2
        b.gt    .Lcbc_dec_tail
 
-       aesd    $dat,q8
-       aesimc  $dat,$dat
-       aesd    $dat,q9
-       aesimc  $dat,$dat
-        veor   $tmp,$ivec,$rndlast
-       aesd    $dat,q10
-       aesimc  $dat,$dat
-        vorr   $ivec,$in0,$in0
-       aesd    $dat,q11
-       aesimc  $dat,$dat
-       aesd    $dat,q12
-       aesimc  $dat,$dat
-       aesd    $dat,q13
-       aesimc  $dat,$dat
-       aesd    $dat,q14
-       aesimc  $dat,$dat
-       aesd    $dat,q15
-
-       veor    $tmp,$tmp,$dat
-       vst1.8  {$tmp},[$out],#16
+       aesd    $dat1,q8
+       aesd    $dat2,q8
+       aesimc  $dat1,$dat1
+       aesimc  $dat2,$dat2
+       aesd    $dat1,q9
+       aesd    $dat2,q9
+       aesimc  $dat1,$dat1
+       aesimc  $dat2,$dat2
+       aesd    $dat1,q12
+       aesd    $dat2,q12
+       aesimc  $dat1,$dat1
+       aesimc  $dat2,$dat2
+        cmn    $len,#0x20
+       aesd    $dat1,q13
+       aesd    $dat2,q13
+       aesimc  $dat1,$dat1
+       aesimc  $dat2,$dat2
+        veor   $tmp1,$ivec,$rndlast
+       aesd    $dat1,q14
+       aesd    $dat2,q14
+       aesimc  $dat1,$dat1
+       aesimc  $dat2,$dat2
+        veor   $tmp2,$in1,$rndlast
+       aesd    $dat1,q15
+       aesd    $dat2,q15
+       b.eq    .Lcbc_dec_one
+       veor    $tmp1,$tmp1,$dat1
+       veor    $tmp2,$tmp2,$dat2
+        vorr   $ivec,$in2,$in2
+       vst1.8  {$tmp1},[$out],#16
+       vst1.8  {$tmp2},[$out],#16
+       b       .Lcbc_done
+
+.Lcbc_dec_one:
+       veor    $tmp1,$tmp1,$dat2
+        vorr   $ivec,$in2,$in2
+       vst1.8  {$tmp1},[$out],#16
 
 .Lcbc_done:
        vst1.8  {$ivec},[$ivp]
 .Lcbc_abort:
 ___
+}
 $code.=<<___   if ($flavour !~ /64/);
        vldmia  sp!,{d8-d15}
        ldmia   sp!,{r4-r8,pc}
@@ -632,8 +614,12 @@ ___
 }}}
 {{{
 my ($inp,$out,$len,$key,$ivp)=map("x$_",(0..4));
-my ($rounds,$cnt,$key_,$ctr,$tctr,$tctr1)=("w5","w6","x7","w8","w9","w10");
+my ($rounds,$cnt,$key_)=("w5","w6","x7");
+my ($ctr,$tctr0,$tctr1,$tctr2)=map("w$_",(8..10,12));
+my $step="x12";                # aliases with $tctr2
+
 my ($dat0,$dat1,$in0,$in1,$tmp0,$tmp1,$ivec,$rndlast)=map("q$_",(0..7));
+my ($dat2,$in2,$tmp2)=map("q$_",(10,11,9));
 
 my ($dat,$tmp)=($dat0,$tmp0);
 
@@ -662,139 +648,149 @@ $code.=<<___;
        vld1.32         {$dat0},[$ivp]
 
        vld1.32         {q8-q9},[$key]          // load key schedule...
-       sub             $rounds,$rounds,#6
-       add             $key_,$key,x5,lsl#4     // pointer to last 7 round keys
+       sub             $rounds,$rounds,#4
+       mov             $step,#16
+       cmp             $len,#2
+       add             $key_,$key,x5,lsl#4     // pointer to last 5 round keys
        sub             $rounds,$rounds,#2
-       vld1.32         {q10-q11},[$key_],#32
        vld1.32         {q12-q13},[$key_],#32
        vld1.32         {q14-q15},[$key_],#32
        vld1.32         {$rndlast},[$key_]
-
        add             $key_,$key,#32
        mov             $cnt,$rounds
-
-       subs            $len,$len,#2
-       b.lo            .Lctr32_tail
-
+       cclr            $step,lo
 #ifndef __ARMEB__
        rev             $ctr, $ctr
 #endif
        vorr            $dat1,$dat0,$dat0
-       add             $ctr, $ctr, #1
+       add             $tctr1, $ctr, #1
+       vorr            $dat2,$dat0,$dat0
+       add             $ctr, $ctr, #2
        vorr            $ivec,$dat0,$dat0
-       rev             $tctr1, $ctr
-       cmp             $rounds,#2
+       rev             $tctr1, $tctr1
        vmov.32         ${dat1}[3],$tctr1
-       b.eq            .Lctr32_128
+       b.ls            .Lctr32_tail
+       rev             $tctr2, $ctr
+       sub             $len,$len,#3            // bias
+       vmov.32         ${dat2}[3],$tctr2
+       b               .Loop3x_ctr32
 
-.Loop2x_ctr32:
+.align 4
+.Loop3x_ctr32:
        aese            $dat0,q8
        aese            $dat1,q8
+       aese            $dat2,q8
        vld1.32         {q8},[$key_],#16
        aesmc           $dat0,$dat0
        aesmc           $dat1,$dat1
+       aesmc           $dat2,$dat2
        subs            $cnt,$cnt,#2
        aese            $dat0,q9
        aese            $dat1,q9
+       aese            $dat2,q9
        vld1.32         {q9},[$key_],#16
        aesmc           $dat0,$dat0
        aesmc           $dat1,$dat1
-       b.gt            .Loop2x_ctr32
+       aesmc           $dat2,$dat2
+       b.gt            .Loop3x_ctr32
 
        aese            $dat0,q8
        aese            $dat1,q8
+       aese            $dat2,q8
+        mov            $key_,$key
        aesmc           $tmp0,$dat0
-        vorr           $dat0,$ivec,$ivec
+        vld1.8         {$in0},[$inp],#16
        aesmc           $tmp1,$dat1
-        vorr           $dat1,$ivec,$ivec
+       aesmc           $dat2,$dat2
+        vorr           $dat0,$ivec,$ivec
        aese            $tmp0,q9
-       aese            $tmp1,q9
-        vld1.8         {$in0},[$inp],#16
-       aesmc           $tmp0,$tmp0
         vld1.8         {$in1},[$inp],#16
-       aesmc           $tmp1,$tmp1
-        add            $ctr,$ctr,#1
-       aese            $tmp0,q10
-       aese            $tmp1,q10
-        rev            $tctr,$ctr
-       aesmc           $tmp0,$tmp0
-       aesmc           $tmp1,$tmp1
-        add            $ctr,$ctr,#1
-       aese            $tmp0,q11
-       aese            $tmp1,q11
-        veor           $in0,$in0,$rndlast
-        rev            $tctr1,$ctr
+       aese            $tmp1,q9
+       aese            $dat2,q9
+        vorr           $dat1,$ivec,$ivec
        aesmc           $tmp0,$tmp0
+        vld1.8         {$in2},[$inp],#16
        aesmc           $tmp1,$tmp1
-        veor           $in1,$in1,$rndlast
-        mov            $key_,$key
+       aesmc           $tmp2,$dat2
+        vorr           $dat2,$ivec,$ivec
+        add            $tctr0,$ctr,#1
        aese            $tmp0,q12
        aese            $tmp1,q12
-        subs           $len,$len,#2
+       aese            $tmp2,q12
+        veor           $in0,$in0,$rndlast
+        add            $tctr1,$ctr,#2
        aesmc           $tmp0,$tmp0
        aesmc           $tmp1,$tmp1
-        vld1.32         {q8-q9},[$key_],#32    // re-pre-load rndkey[0-1]
+       aesmc           $tmp2,$tmp2
+        veor           $in1,$in1,$rndlast
+        add            $ctr,$ctr,#3
        aese            $tmp0,q13
        aese            $tmp1,q13
+       aese            $tmp2,q13
+        veor           $in2,$in2,$rndlast
+        rev            $tctr0,$tctr0
        aesmc           $tmp0,$tmp0
+        vld1.32         {q8},[$key_],#16       // re-pre-load rndkey[0]
        aesmc           $tmp1,$tmp1
+       aesmc           $tmp2,$tmp2
+        vmov.32        ${dat0}[3], $tctr0
+        rev            $tctr1,$tctr1
        aese            $tmp0,q14
        aese            $tmp1,q14
-        vmov.32        ${dat0}[3], $tctr
-       aesmc           $tmp0,$tmp0
+       aese            $tmp2,q14
         vmov.32        ${dat1}[3], $tctr1
+        rev            $tctr2,$ctr
+       aesmc           $tmp0,$tmp0
        aesmc           $tmp1,$tmp1
+       aesmc           $tmp2,$tmp2
+        vmov.32        ${dat2}[3], $tctr2
+        subs           $len,$len,#3
        aese            $tmp0,q15
        aese            $tmp1,q15
+       aese            $tmp2,q15
 
         mov            $cnt,$rounds
        veor            $in0,$in0,$tmp0
        veor            $in1,$in1,$tmp1
+       veor            $in2,$in2,$tmp2
+        vld1.32         {q9},[$key_],#16       // re-pre-load rndkey[1]
        vst1.8          {$in0},[$out],#16
        vst1.8          {$in1},[$out],#16
-       b.hs            .Loop2x_ctr32
+       vst1.8          {$in2},[$out],#16
+       b.hs            .Loop3x_ctr32
 
-       adds            $len,$len,#2
+       adds            $len,$len,#3
        b.eq            .Lctr32_done
-       b               .Lctr32_tail
-
-.Lctr32_128:
-       vld1.32         {$tmp0-$tmp1},[$key_]
+       cmp             $len,#1
+       mov             $step,#16
+       cclr            $step,eq
 
-.Loop2x_ctr32_128:
+.Lctr32_tail:
        aese            $dat0,q8
        aese            $dat1,q8
+       vld1.32         {q8},[$key_],#16
        aesmc           $dat0,$dat0
-        vld1.8         {$in0},[$inp],#16
        aesmc           $dat1,$dat1
-        vld1.8         {$in1},[$inp],#16
+       subs            $cnt,$cnt,#2
        aese            $dat0,q9
        aese            $dat1,q9
-        add            $ctr,$ctr,#1
-       aesmc           $dat0,$dat0
-       aesmc           $dat1,$dat1
-        rev            $tctr,$ctr
-       aese            $dat0,$tmp0
-       aese            $dat1,$tmp0
-        add            $ctr,$ctr,#1
-       aesmc           $dat0,$dat0
-       aesmc           $dat1,$dat1
-        rev            $tctr1,$ctr
-       aese            $dat0,$tmp1
-       aese            $dat1,$tmp1
-        subs           $len,$len,#2
+       vld1.32         {q9},[$key_],#16
        aesmc           $dat0,$dat0
        aesmc           $dat1,$dat1
-       aese            $dat0,q10
-       aese            $dat1,q10
+       b.gt            .Lctr32_tail
+
+       aese            $dat0,q8
+       aese            $dat1,q8
        aesmc           $dat0,$dat0
        aesmc           $dat1,$dat1
-       aese            $dat0,q11
-       aese            $dat1,q11
+       aese            $dat0,q9
+       aese            $dat1,q9
        aesmc           $dat0,$dat0
        aesmc           $dat1,$dat1
+        vld1.8         {$in0},[$inp],$step
        aese            $dat0,q12
        aese            $dat1,q12
+        vld1.8         {$in1},[$inp]
        aesmc           $dat0,$dat0
        aesmc           $dat1,$dat1
        aese            $dat0,q13
@@ -803,56 +799,19 @@ $code.=<<___;
        aesmc           $dat1,$dat1
        aese            $dat0,q14
        aese            $dat1,q14
+        veor           $in0,$in0,$rndlast
        aesmc           $dat0,$dat0
        aesmc           $dat1,$dat1
-        veor           $in0,$in0,$rndlast
-       aese            $dat0,q15
         veor           $in1,$in1,$rndlast
+       aese            $dat0,q15
        aese            $dat1,q15
 
+       cmp             $len,#1
        veor            $in0,$in0,$dat0
-       vorr            $dat0,$ivec,$ivec
        veor            $in1,$in1,$dat1
-       vorr            $dat1,$ivec,$ivec
        vst1.8          {$in0},[$out],#16
-       vmov.32         ${dat0}[3], $tctr
-       vst1.8          {$in1},[$out],#16
-       vmov.32         ${dat1}[3], $tctr1
-       b.hs            .Loop2x_ctr32_128
-
-       adds            $len,$len,#2
        b.eq            .Lctr32_done
-
-.Lctr32_tail:
-       aese            $dat,q8
-       vld1.32         {q8},[$key_],#16
-       aesmc           $dat,$dat
-       subs            $cnt,$cnt,#2
-       aese            $dat,q9
-       vld1.32         {q9},[$key_],#16
-       aesmc           $dat,$dat
-       b.gt            .Lctr32_tail
-
-       aese            $dat,q8
-       aesmc           $dat,$dat
-       aese            $dat,q9
-       aesmc           $dat,$dat
-        vld1.8         {$in0},[$inp]
-       aese            $dat,q10
-       aesmc           $dat,$dat
-       aese            $dat,q11
-       aesmc           $dat,$dat
-       aese            $dat,q12
-       aesmc           $dat,$dat
-       aese            $dat,q13
-       aesmc           $dat,$dat
-       aese            $dat,q14
-       aesmc           $dat,$dat
-        veor           $in0,$in0,$rndlast
-       aese            $dat,q15
-
-       veor            $in0,$in0,$dat
-       vst1.8          {$in0},[$out]
+       vst1.8          {$in1},[$out]
 
 .Lctr32_done:
 ___
@@ -887,29 +846,30 @@ if ($flavour =~ /64/) {                   ######## 64-bit code
     };
 
     foreach(split("\n",$code)) {
-        s/\`([^\`]*)\`/eval($1)/geo;
+       s/\`([^\`]*)\`/eval($1)/geo;
 
        s/\bq([0-9]+)\b/"v".($1<8?$1:$1+8).".16b"/geo;  # old->new registers
-        s/@\s/\/\//o;                  # old->new style commentary
+       s/@\s/\/\//o;                   # old->new style commentary
 
        #s/[v]?(aes\w+)\s+([qv].*)/unaes($1,$2)/geo     or
        s/cclr\s+([wx])([^,]+),\s*([a-z]+)/csel $1$2,$1zr,$1$2,$3/o     or
-        s/vmov\.i8/movi/o      or      # fix up legacy mnemonics
-        s/vext\.8/ext/o                or
-        s/vrev32\.8/rev32/o    or
-        s/vtst\.8/cmtst/o      or
-        s/vshr/ushr/o          or
-        s/^(\s+)v/$1/o         or      # strip off v prefix
+       s/mov\.([a-z]+)\s+([wx][0-9]+),\s*([wx][0-9]+)/csel     $2,$3,$2,$1/o   or
+       s/vmov\.i8/movi/o       or      # fix up legacy mnemonics
+       s/vext\.8/ext/o         or
+       s/vrev32\.8/rev32/o     or
+       s/vtst\.8/cmtst/o       or
+       s/vshr/ushr/o           or
+       s/^(\s+)v/$1/o          or      # strip off v prefix
        s/\bbx\s+lr\b/ret/o;
 
        # fix up remainig legacy suffixes
        s/\.[ui]?8//o;
        m/\],#8/o and s/\.16b/\.8b/go;
-        s/\.[ui]?32//o and s/\.16b/\.4s/go;
-        s/\.[ui]?64//o and s/\.16b/\.2d/go;
+       s/\.[ui]?32//o and s/\.16b/\.4s/go;
+       s/\.[ui]?64//o and s/\.16b/\.2d/go;
        s/\.[42]([sd])\[([0-3])\]/\.$1\[$2\]/o;
 
-        print $_,"\n";
+       print $_,"\n";
     }
 } else {                               ######## 32-bit code
     my %opcode = (
@@ -955,11 +915,11 @@ if ($flavour =~ /64/) {                   ######## 64-bit code
     }
 
     foreach(split("\n",$code)) {
-        s/\`([^\`]*)\`/eval($1)/geo;
+       s/\`([^\`]*)\`/eval($1)/geo;
 
        s/\b[wx]([0-9]+)\b/r$1/go;              # new->old registers
        s/\bv([0-9])\.[12468]+[bsd]\b/q$1/go;   # new->old registers
-        s/\/\/\s?/@ /o;                                # new->old style commentary
+       s/\/\/\s?/@ /o;                         # new->old style commentary
 
        # fix up remainig new-style suffixes
        s/\{q([0-9]+)\},\s*\[(.+)\],#8/sprintf "{d%d},[$2]!",2*$1/eo    or
@@ -971,9 +931,10 @@ if ($flavour =~ /64/) {                    ######## 64-bit code
        s/vdup\.32\s+(.*)/unvdup32($1)/geo              or
        s/vmov\.32\s+(.*)/unvmov32($1)/geo              or
        s/^(\s+)b\./$1b/o                               or
+       s/^(\s+)mov\./$1mov/o                           or
        s/^(\s+)ret/$1bx\tlr/o;
 
-        print $_,"\n";
+       print $_,"\n";
     }
 }