X-Git-Url: https://git.openssl.org/gitweb/?p=openssl.git;a=blobdiff_plain;f=ssl%2Fd1_pkt.c;h=10586fee5408ea12be8d6f7d697ed35d8d2653d6;hp=4523484011b6c5724348b95776363402ee3ab467;hb=e167fd05b8b781bf04fcd462c0d28fae386116fe;hpb=89c333e3e5af6eb0f1d8986710448ac85116235a diff --git a/ssl/d1_pkt.c b/ssl/d1_pkt.c index 4523484011..10586fee54 100644 --- a/ssl/d1_pkt.c +++ b/ssl/d1_pkt.c @@ -1,7 +1,7 @@ /* ssl/d1_pkt.c */ -/* +/* * DTLS implementation written by Nagendra Modadugu - * (nagendra@cs.stanford.edu) for the OpenSSL project 2005. + * (nagendra@cs.stanford.edu) for the OpenSSL project 2005. */ /* ==================================================================== * Copyright (c) 1998-2005 The OpenSSL Project. All rights reserved. @@ -11,7 +11,7 @@ * are met: * * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. + * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in @@ -62,21 +62,21 @@ * This package is an SSL implementation written * by Eric Young (eay@cryptsoft.com). * The implementation was written so as to conform with Netscapes SSL. - * + * * This library is free for commercial and non-commercial use as long as * the following conditions are aheared to. The following conditions * apply to all code found in this distribution, be it the RC4, RSA, * lhash, DES, etc., code; not just the SSL code. The SSL documentation * included with this distribution is covered by the same copyright terms * except that the holder is Tim Hudson (tjh@cryptsoft.com). - * + * * Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package. - * + * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: @@ -91,10 +91,10 @@ * Eric Young (eay@cryptsoft.com)" * The word 'cryptographic' can be left out if the rouines from the library * being used are not cryptographic related :-). - * 4. If you include any Windows specific code (or a derivative thereof) from + * 4. If you include any Windows specific code (or a derivative thereof) from * the apps directory (application code) you must include an acknowledgement: * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" - * + * * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE @@ -106,7 +106,7 @@ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. - * + * * The licence and distribution terms for any publically available version or * derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence @@ -120,553 +120,701 @@ #include #include #include +#include /* mod 128 saturating subtract of two 64-bit values in big-endian order */ -static int satsub64be(const unsigned char *v1,const unsigned char *v2) -{ int ret,sat,brw,i; - - if (sizeof(long) == 8) do - { const union { long one; char little; } is_endian = {1}; - long l; - - if (is_endian.little) break; - /* not reached on little-endians */ - /* following test is redundant, because input is - * always aligned, but I take no chances... */ - if (((size_t)v1|(size_t)v2)&0x7) break; - - l = *((long *)v1); - l -= *((long *)v2); - if (l>128) return 128; - else if (l<-128) return -128; - else return (int)l; - } while (0); - - ret = (int)v1[7]-(int)v2[7]; - sat = 0; - brw = ret>>8; /* brw is either 0 or -1 */ - if (ret & 0x80) - { for (i=6;i>=0;i--) - { brw += (int)v1[i]-(int)v2[i]; - sat |= ~brw; - brw >>= 8; - } - } - else - { for (i=6;i>=0;i--) - { brw += (int)v1[i]-(int)v2[i]; - sat |= brw; - brw >>= 8; - } - } - brw <<= 8; /* brw is either 0 or -256 */ - - if (sat&0xff) return brw | 0x80; - else return brw + (ret&0xFF); +static int satsub64be(const unsigned char *v1, const unsigned char *v2) +{ + int ret, i; + + if (sizeof(long) == 8) + do { + const union { + long one; + char little; + } is_endian = { + 1 + }; + long l; + + if (is_endian.little) + break; + /* not reached on little-endians */ + /* + * following test is redundant, because input is always aligned, + * but I take no chances... + */ + if (((size_t)v1 | (size_t)v2) & 0x7) + break; + + l = *((long *)v1); + l -= *((long *)v2); + if (l > 128) + return 128; + else if (l < -128) + return -128; + else + return (int)l; + } while (0); + + ret = 0; + for (i=0; i<7; i++) { + if (v1[i] > v2[i]) { + /* v1 is larger... but by how much? */ + if (v1[i] != v2[i] + 1) + return 128; + while (++i <= 6) { + if (v1[i] != 0x00 || v2[i] != 0xff) + return 128; /* too much */ + } + /* We checked all the way to the penultimate byte, + * so despite higher bytes changing we actually + * know that it only changed from (e.g.) + * ... (xx) ff ff ff ?? + * to ... (xx+1) 00 00 00 ?? + * so we add a 'bias' of 256 for the carry that + * happened, and will eventually return + * 256 + v1[7] - v2[7]. */ + ret = 256; + break; + } else if (v2[i] > v1[i]) { + /* v2 is larger... but by how much? */ + if (v2[i] != v1[i] + 1) + return -128; + while (++i <= 6) { + if (v2[i] != 0x00 || v1[i] != 0xff) + return -128; /* too much */ + } + /* Similar to the case above, we know it changed + * from ... (xx) 00 00 00 ?? + * to ... (xx-1) ff ff ff ?? + * so we add a 'bias' of -256 for the borrow, + * to return -256 + v1[7] - v2[7]. */ + ret = -256; + } + } + + ret += (int)v1[7] - (int)v2[7]; + + if (ret > 128) + return 128; + else if (ret < -128) + return -128; + else + return ret; } -static int have_handshake_fragment(SSL *s, int type, unsigned char *buf, - int len, int peek); +static int have_handshake_fragment(SSL *s, int type, unsigned char *buf, + int len, int peek); static int dtls1_record_replay_check(SSL *s, DTLS1_BITMAP *bitmap); static void dtls1_record_bitmap_update(SSL *s, DTLS1_BITMAP *bitmap); -static DTLS1_BITMAP *dtls1_get_bitmap(SSL *s, SSL3_RECORD *rr, - unsigned int *is_next_epoch); +static DTLS1_BITMAP *dtls1_get_bitmap(SSL *s, SSL3_RECORD *rr, + unsigned int *is_next_epoch); #if 0 static int dtls1_record_needs_buffering(SSL *s, SSL3_RECORD *rr, - unsigned short *priority, unsigned long *offset); + unsigned short *priority, + unsigned long *offset); #endif static int dtls1_buffer_record(SSL *s, record_pqueue *q, - unsigned char *priority); -static int dtls1_process_record(SSL *s); -static void dtls1_clear_timeouts(SSL *s); + unsigned char *priority); +static int dtls1_process_record(SSL *s, DTLS1_BITMAP *bitmap); /* copy buffered record into SSL structure */ -static int -dtls1_copy_record(SSL *s, pitem *item) - { +static int dtls1_copy_record(SSL *s, pitem *item) +{ DTLS1_RECORD_DATA *rdata; rdata = (DTLS1_RECORD_DATA *)item->data; - + if (s->s3->rbuf.buf != NULL) OPENSSL_free(s->s3->rbuf.buf); - + s->packet = rdata->packet; s->packet_length = rdata->packet_length; memcpy(&(s->s3->rbuf), &(rdata->rbuf), sizeof(SSL3_BUFFER)); memcpy(&(s->s3->rrec), &(rdata->rrec), sizeof(SSL3_RECORD)); - - return(1); - } + /* Set proper sequence number for mac calculation */ + memcpy(&(s->s3->read_sequence[2]), &(rdata->packet[5]), 6); + + return (1); +} static int dtls1_buffer_record(SSL *s, record_pqueue *queue, unsigned char *priority) - { - DTLS1_RECORD_DATA *rdata; - pitem *item; - - rdata = OPENSSL_malloc(sizeof(DTLS1_RECORD_DATA)); - item = pitem_new(priority, rdata); - if (rdata == NULL || item == NULL) - { - if (rdata != NULL) OPENSSL_free(rdata); - if (item != NULL) pitem_free(item); - - SSLerr(SSL_F_DTLS1_BUFFER_RECORD, ERR_R_INTERNAL_ERROR); - return(0); - } - - rdata->packet = s->packet; - rdata->packet_length = s->packet_length; - memcpy(&(rdata->rbuf), &(s->s3->rbuf), sizeof(SSL3_BUFFER)); - memcpy(&(rdata->rrec), &(s->s3->rrec), sizeof(SSL3_RECORD)); - - item->data = rdata; - - /* insert should not fail, since duplicates are dropped */ - if (pqueue_insert(queue->q, item) == NULL) - { - OPENSSL_free(rdata); - pitem_free(item); - return(0); - } - - s->packet = NULL; - s->packet_length = 0; - memset(&(s->s3->rbuf), 0, sizeof(SSL3_BUFFER)); - memset(&(s->s3->rrec), 0, sizeof(SSL3_RECORD)); - - if (!ssl3_setup_buffers(s)) - { - SSLerr(SSL_F_DTLS1_BUFFER_RECORD, ERR_R_INTERNAL_ERROR); - OPENSSL_free(rdata); - pitem_free(item); - return(0); - } - - return(1); - } +{ + DTLS1_RECORD_DATA *rdata; + pitem *item; + /* Limit the size of the queue to prevent DOS attacks */ + if (pqueue_size(queue->q) >= 100) + return 0; -static int -dtls1_retrieve_buffered_record(SSL *s, record_pqueue *queue) - { + rdata = OPENSSL_malloc(sizeof(DTLS1_RECORD_DATA)); + item = pitem_new(priority, rdata); + if (rdata == NULL || item == NULL) { + if (rdata != NULL) + OPENSSL_free(rdata); + if (item != NULL) + pitem_free(item); + + SSLerr(SSL_F_DTLS1_BUFFER_RECORD, ERR_R_INTERNAL_ERROR); + return -1; + } + + rdata->packet = s->packet; + rdata->packet_length = s->packet_length; + memcpy(&(rdata->rbuf), &(s->s3->rbuf), sizeof(SSL3_BUFFER)); + memcpy(&(rdata->rrec), &(s->s3->rrec), sizeof(SSL3_RECORD)); + + item->data = rdata; + +#ifndef OPENSSL_NO_SCTP + /* Store bio_dgram_sctp_rcvinfo struct */ + if (BIO_dgram_is_sctp(SSL_get_rbio(s)) && + (s->state == SSL3_ST_SR_FINISHED_A + || s->state == SSL3_ST_CR_FINISHED_A)) { + BIO_ctrl(SSL_get_rbio(s), BIO_CTRL_DGRAM_SCTP_GET_RCVINFO, + sizeof(rdata->recordinfo), &rdata->recordinfo); + } +#endif + + s->packet = NULL; + s->packet_length = 0; + memset(&(s->s3->rbuf), 0, sizeof(SSL3_BUFFER)); + memset(&(s->s3->rrec), 0, sizeof(SSL3_RECORD)); + + if (!ssl3_setup_buffers(s)) { + SSLerr(SSL_F_DTLS1_BUFFER_RECORD, ERR_R_INTERNAL_ERROR); + if (rdata->rbuf.buf != NULL) + OPENSSL_free(rdata->rbuf.buf); + OPENSSL_free(rdata); + pitem_free(item); + return (-1); + } + + /* insert should not fail, since duplicates are dropped */ + if (pqueue_insert(queue->q, item) == NULL) { + SSLerr(SSL_F_DTLS1_BUFFER_RECORD, ERR_R_INTERNAL_ERROR); + if (rdata->rbuf.buf != NULL) + OPENSSL_free(rdata->rbuf.buf); + OPENSSL_free(rdata); + pitem_free(item); + return (-1); + } + + return (1); +} + +static int dtls1_retrieve_buffered_record(SSL *s, record_pqueue *queue) +{ pitem *item; item = pqueue_pop(queue->q); - if (item) - { + if (item) { dtls1_copy_record(s, item); OPENSSL_free(item->data); - pitem_free(item); + pitem_free(item); - return(1); - } - - return(0); + return (1); } + return (0); +} -/* retrieve a buffered record that belongs to the new epoch, i.e., not processed - * yet */ +/* + * retrieve a buffered record that belongs to the new epoch, i.e., not + * processed yet + */ #define dtls1_get_unprocessed_record(s) \ dtls1_retrieve_buffered_record((s), \ &((s)->d1->unprocessed_rcds)) -/* retrieve a buffered record that belongs to the current epoch, ie, processed */ +/* + * retrieve a buffered record that belongs to the current epoch, ie, + * processed + */ #define dtls1_get_processed_record(s) \ dtls1_retrieve_buffered_record((s), \ &((s)->d1->processed_rcds)) -static int -dtls1_process_buffered_records(SSL *s) - { +static int dtls1_process_buffered_records(SSL *s) +{ pitem *item; - + SSL3_BUFFER *rb; + SSL3_RECORD *rr; + DTLS1_BITMAP *bitmap; + unsigned int is_next_epoch; + int replayok = 1; + item = pqueue_peek(s->d1->unprocessed_rcds.q); - if (item) - { - DTLS1_RECORD_DATA *rdata; - rdata = (DTLS1_RECORD_DATA *)item->data; - + if (item) { /* Check if epoch is current. */ if (s->d1->unprocessed_rcds.epoch != s->d1->r_epoch) - return(1); /* Nothing to do. */ - + return 1; /* Nothing to do. */ + + rr = &s->s3->rrec; + rb = &s->s3->rbuf; + + if (rb->left > 0) { + /* + * We've still got data from the current packet to read. There could + * be a record from the new epoch in it - so don't overwrite it + * with the unprocessed records yet (we'll do it when we've + * finished reading the current packet). + */ + return 1; + } + + /* Process all the records. */ - while (pqueue_peek(s->d1->unprocessed_rcds.q)) - { + while (pqueue_peek(s->d1->unprocessed_rcds.q)) { dtls1_get_unprocessed_record(s); - if ( ! dtls1_process_record(s)) - return(0); - dtls1_buffer_record(s, &(s->d1->processed_rcds), - s->s3->rrec.seq_num); + bitmap = dtls1_get_bitmap(s, rr, &is_next_epoch); + if (bitmap == NULL) { + /* + * Should not happen. This will only ever be NULL when the + * current record is from a different epoch. But that cannot + * be the case because we already checked the epoch above + */ + SSLerr(SSL_F_DTLS1_PROCESS_BUFFERED_RECORDS, + ERR_R_INTERNAL_ERROR); + return 0; + } +#ifndef OPENSSL_NO_SCTP + /* Only do replay check if no SCTP bio */ + if (!BIO_dgram_is_sctp(SSL_get_rbio(s))) +#endif + { + /* + * Check whether this is a repeat, or aged record. We did this + * check once already when we first received the record - but + * we might have updated the window since then due to + * records we subsequently processed. + */ + replayok = dtls1_record_replay_check(s, bitmap); + } + + if (!replayok || !dtls1_process_record(s, bitmap)) { + /* dump this record */ + rr->length = 0; + s->packet_length = 0; + continue; } + + if (dtls1_buffer_record(s, &(s->d1->processed_rcds), + s->s3->rrec.seq_num) < 0) + return 0; } + } - /* sync epoch numbers once all the unprocessed records - * have been processed */ + /* + * sync epoch numbers once all the unprocessed records have been + * processed + */ s->d1->processed_rcds.epoch = s->d1->r_epoch; s->d1->unprocessed_rcds.epoch = s->d1->r_epoch + 1; - return(1); - } - + return 1; +} #if 0 -static int -dtls1_get_buffered_record(SSL *s) - { - pitem *item; - PQ_64BIT priority = - (((PQ_64BIT)s->d1->handshake_read_seq) << 32) | - ((PQ_64BIT)s->d1->r_msg_hdr.frag_off); - - if ( ! SSL_in_init(s)) /* if we're not (re)negotiating, - nothing buffered */ - return 0; - - - item = pqueue_peek(s->d1->rcvd_records); - if (item && item->priority == priority) - { - /* Check if we've received the record of interest. It must be - * a handshake record, since data records as passed up without - * buffering */ - DTLS1_RECORD_DATA *rdata; - item = pqueue_pop(s->d1->rcvd_records); - rdata = (DTLS1_RECORD_DATA *)item->data; - - if (s->s3->rbuf.buf != NULL) - OPENSSL_free(s->s3->rbuf.buf); - - s->packet = rdata->packet; - s->packet_length = rdata->packet_length; - memcpy(&(s->s3->rbuf), &(rdata->rbuf), sizeof(SSL3_BUFFER)); - memcpy(&(s->s3->rrec), &(rdata->rrec), sizeof(SSL3_RECORD)); - - OPENSSL_free(item->data); - pitem_free(item); - - /* s->d1->next_expected_seq_num++; */ - return(1); - } - - return 0; - } +static int dtls1_get_buffered_record(SSL *s) +{ + pitem *item; + PQ_64BIT priority = + (((PQ_64BIT) s->d1->handshake_read_seq) << 32) | + ((PQ_64BIT) s->d1->r_msg_hdr.frag_off); + + /* if we're not (re)negotiating, nothing buffered */ + if (!SSL_in_init(s)) + return 0; + + item = pqueue_peek(s->d1->rcvd_records); + if (item && item->priority == priority) { + /* + * Check if we've received the record of interest. It must be a + * handshake record, since data records as passed up without + * buffering + */ + DTLS1_RECORD_DATA *rdata; + item = pqueue_pop(s->d1->rcvd_records); + rdata = (DTLS1_RECORD_DATA *)item->data; + + if (s->s3->rbuf.buf != NULL) + OPENSSL_free(s->s3->rbuf.buf); + + s->packet = rdata->packet; + s->packet_length = rdata->packet_length; + memcpy(&(s->s3->rbuf), &(rdata->rbuf), sizeof(SSL3_BUFFER)); + memcpy(&(s->s3->rrec), &(rdata->rrec), sizeof(SSL3_RECORD)); + + OPENSSL_free(item->data); + pitem_free(item); + + /* s->d1->next_expected_seq_num++; */ + return (1); + } + + return 0; +} #endif -static int -dtls1_process_record(SSL *s) +static int dtls1_process_record(SSL *s, DTLS1_BITMAP *bitmap) { - int i,al; - int clear=0; - int enc_err; - SSL_SESSION *sess; - SSL3_RECORD *rr; - unsigned int mac_size; - unsigned char md[EVP_MAX_MD_SIZE]; - - - rr= &(s->s3->rrec); - sess = s->session; - - /* At this point, s->packet_length == SSL3_RT_HEADER_LNGTH + rr->length, - * and we have that many bytes in s->packet - */ - rr->input= &(s->packet[DTLS1_RT_HEADER_LENGTH]); - - /* ok, we can now read from 's->packet' data into 'rr' - * rr->input points at rr->length bytes, which - * need to be copied into rr->data by either - * the decryption or by the decompression - * When the data is 'copied' into the rr->data buffer, - * rr->input will be pointed at the new buffer */ - - /* We now have - encrypted [ MAC [ compressed [ plain ] ] ] - * rr->length bytes of encrypted compressed stuff. */ - - /* check is not needed I believe */ - if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH) - { - al=SSL_AD_RECORD_OVERFLOW; - SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_ENCRYPTED_LENGTH_TOO_LONG); - goto f_err; - } - - /* decrypt in place in 'rr->input' */ - rr->data=rr->input; - - enc_err = s->method->ssl3_enc->enc(s,0); - if (enc_err <= 0) - { - if (enc_err == 0) - /* SSLerr() and ssl3_send_alert() have been called */ - goto err; - - /* otherwise enc_err == -1 */ - goto decryption_failed_or_bad_record_mac; - } + int i, al; + int enc_err; + SSL_SESSION *sess; + SSL3_RECORD *rr; + unsigned int mac_size, orig_len; + unsigned char md[EVP_MAX_MD_SIZE]; + + rr = &(s->s3->rrec); + sess = s->session; + + /* + * At this point, s->packet_length == SSL3_RT_HEADER_LNGTH + rr->length, + * and we have that many bytes in s->packet + */ + rr->input = &(s->packet[DTLS1_RT_HEADER_LENGTH]); + + /* + * ok, we can now read from 's->packet' data into 'rr' rr->input points + * at rr->length bytes, which need to be copied into rr->data by either + * the decryption or by the decompression When the data is 'copied' into + * the rr->data buffer, rr->input will be pointed at the new buffer + */ + + /* + * We now have - encrypted [ MAC [ compressed [ plain ] ] ] rr->length + * bytes of encrypted compressed stuff. + */ + + /* check is not needed I believe */ + if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH) { + al = SSL_AD_RECORD_OVERFLOW; + SSLerr(SSL_F_DTLS1_PROCESS_RECORD, SSL_R_ENCRYPTED_LENGTH_TOO_LONG); + goto f_err; + } + /* decrypt in place in 'rr->input' */ + rr->data = rr->input; + + enc_err = s->method->ssl3_enc->enc(s, 0); + /*- + * enc_err is: + * 0: (in non-constant time) if the record is publically invalid. + * 1: if the padding is valid + * -1: if the padding is invalid + */ + if (enc_err == 0) { + /* For DTLS we simply ignore bad packets. */ + rr->length = 0; + s->packet_length = 0; + goto err; + } #ifdef TLS_DEBUG -printf("dec %d\n",rr->length); -{ unsigned int z; for (z=0; zlength; z++) printf("%02X%c",rr->data[z],((z+1)%16)?' ':'\n'); } -printf("\n"); + printf("dec %d\n", rr->length); + { + unsigned int z; + for (z = 0; z < rr->length; z++) + printf("%02X%c", rr->data[z], ((z + 1) % 16) ? ' ' : '\n'); + } + printf("\n"); #endif - /* r->length is now the compressed data plus mac */ - if ( (sess == NULL) || - (s->enc_read_ctx == NULL) || - (s->read_hash == NULL)) - clear=1; - - if (!clear) - { - mac_size=EVP_MD_CTX_size(s->read_hash); - - if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH+mac_size) - { -#if 0 /* OK only for stream ciphers (then rr->length is visible from ciphertext anyway) */ - al=SSL_AD_RECORD_OVERFLOW; - SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_PRE_MAC_LENGTH_TOO_LONG); - goto f_err; -#else - goto decryption_failed_or_bad_record_mac; -#endif - } - /* check the MAC for rr->input (it's in mac_size bytes at the tail) */ - if (rr->length < mac_size) - { -#if 0 /* OK only for stream ciphers */ - al=SSL_AD_DECODE_ERROR; - SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_LENGTH_TOO_SHORT); - goto f_err; -#else - goto decryption_failed_or_bad_record_mac; -#endif - } - rr->length-=mac_size; - i=s->method->ssl3_enc->mac(s,md,0); - if (memcmp(md,&(rr->data[rr->length]),mac_size) != 0) - { - goto decryption_failed_or_bad_record_mac; - } - } - - /* r->length is now just compressed */ - if (s->expand != NULL) - { - if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH) - { - al=SSL_AD_RECORD_OVERFLOW; - SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_COMPRESSED_LENGTH_TOO_LONG); - goto f_err; - } - if (!ssl3_do_uncompress(s)) - { - al=SSL_AD_DECOMPRESSION_FAILURE; - SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_BAD_DECOMPRESSION); - goto f_err; - } - } - - if (rr->length > SSL3_RT_MAX_PLAIN_LENGTH) - { - al=SSL_AD_RECORD_OVERFLOW; - SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_DATA_LENGTH_TOO_LONG); - goto f_err; - } - - rr->off=0; - /* So at this point the following is true - * ssl->s3->rrec.type is the type of record - * ssl->s3->rrec.length == number of bytes in record - * ssl->s3->rrec.off == offset to first valid byte - * ssl->s3->rrec.data == where to take bytes from, increment - * after use :-). - */ - - /* we have pulled in a full packet so zero things */ - s->packet_length=0; - dtls1_record_bitmap_update(s, &(s->d1->bitmap));/* Mark receipt of record. */ - return(1); - -decryption_failed_or_bad_record_mac: - /* Separate 'decryption_failed' alert was introduced with TLS 1.0, - * SSL 3.0 only has 'bad_record_mac'. But unless a decryption - * failure is directly visible from the ciphertext anyway, - * we should not reveal which kind of error occured -- this - * might become visible to an attacker (e.g. via logfile) */ - al=SSL_AD_BAD_RECORD_MAC; - SSLerr(SSL_F_DTLS1_PROCESS_RECORD,SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC); -f_err: - ssl3_send_alert(s,SSL3_AL_FATAL,al); -err: - return(0); -} + /* r->length is now the compressed data plus mac */ + if ((sess != NULL) && + (s->enc_read_ctx != NULL) && (EVP_MD_CTX_md(s->read_hash) != NULL)) { + /* s->read_hash != NULL => mac_size != -1 */ + unsigned char *mac = NULL; + unsigned char mac_tmp[EVP_MAX_MD_SIZE]; + mac_size = EVP_MD_CTX_size(s->read_hash); + OPENSSL_assert(mac_size <= EVP_MAX_MD_SIZE); + + /* + * kludge: *_cbc_remove_padding passes padding length in rr->type + */ + orig_len = rr->length + ((unsigned int)rr->type >> 8); + + /* + * orig_len is the length of the record before any padding was + * removed. This is public information, as is the MAC in use, + * therefore we can safely process the record in a different amount + * of time if it's too short to possibly contain a MAC. + */ + if (orig_len < mac_size || + /* CBC records must have a padding length byte too. */ + (EVP_CIPHER_CTX_mode(s->enc_read_ctx) == EVP_CIPH_CBC_MODE && + orig_len < mac_size + 1)) { + al = SSL_AD_DECODE_ERROR; + SSLerr(SSL_F_DTLS1_PROCESS_RECORD, SSL_R_LENGTH_TOO_SHORT); + goto f_err; + } + + if (EVP_CIPHER_CTX_mode(s->enc_read_ctx) == EVP_CIPH_CBC_MODE) { + /* + * We update the length so that the TLS header bytes can be + * constructed correctly but we need to extract the MAC in + * constant time from within the record, without leaking the + * contents of the padding bytes. + */ + mac = mac_tmp; + ssl3_cbc_copy_mac(mac_tmp, rr, mac_size, orig_len); + rr->length -= mac_size; + } else { + /* + * In this case there's no padding, so |orig_len| equals + * |rec->length| and we checked that there's enough bytes for + * |mac_size| above. + */ + rr->length -= mac_size; + mac = &rr->data[rr->length]; + } + + i = s->method->ssl3_enc->mac(s, md, 0 /* not send */ ); + if (i < 0 || mac == NULL + || CRYPTO_memcmp(md, mac, (size_t)mac_size) != 0) + enc_err = -1; + if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH + mac_size) + enc_err = -1; + } + + if (enc_err < 0) { + /* decryption failed, silently discard message */ + rr->length = 0; + s->packet_length = 0; + goto err; + } + + /* r->length is now just compressed */ + if (s->expand != NULL) { + if (rr->length > SSL3_RT_MAX_COMPRESSED_LENGTH) { + al = SSL_AD_RECORD_OVERFLOW; + SSLerr(SSL_F_DTLS1_PROCESS_RECORD, + SSL_R_COMPRESSED_LENGTH_TOO_LONG); + goto f_err; + } + if (!ssl3_do_uncompress(s)) { + al = SSL_AD_DECOMPRESSION_FAILURE; + SSLerr(SSL_F_DTLS1_PROCESS_RECORD, SSL_R_BAD_DECOMPRESSION); + goto f_err; + } + } + + if (rr->length > SSL3_RT_MAX_PLAIN_LENGTH) { + al = SSL_AD_RECORD_OVERFLOW; + SSLerr(SSL_F_DTLS1_PROCESS_RECORD, SSL_R_DATA_LENGTH_TOO_LONG); + goto f_err; + } + + rr->off = 0; + /*- + * So at this point the following is true + * ssl->s3->rrec.type is the type of record + * ssl->s3->rrec.length == number of bytes in record + * ssl->s3->rrec.off == offset to first valid byte + * ssl->s3->rrec.data == where to take bytes from, increment + * after use :-). + */ + + /* we have pulled in a full packet so zero things */ + s->packet_length = 0; + + /* Mark receipt of record. */ + dtls1_record_bitmap_update(s, bitmap); + return (1); -/* Call this to get a new input record. + f_err: + ssl3_send_alert(s, SSL3_AL_FATAL, al); + err: + return (0); +} + +/*- + * Call this to get a new input record. * It will return <= 0 if more data is needed, normally due to an error * or non-blocking IO. * When it finishes, one packet has been decoded and can be found in * ssl->s3->rrec.type - is the type of record - * ssl->s3->rrec.data, - data + * ssl->s3->rrec.data, - data * ssl->s3->rrec.length, - number of bytes */ /* used only by dtls1_read_bytes */ int dtls1_get_record(SSL *s) - { - int ssl_major,ssl_minor,al; - int i,n; - SSL3_RECORD *rr; - SSL_SESSION *sess; - unsigned char *p; - unsigned short version; - DTLS1_BITMAP *bitmap; - unsigned int is_next_epoch; - - rr= &(s->s3->rrec); - sess=s->session; - - /* The epoch may have changed. If so, process all the - * pending records. This is a non-blocking operation. */ - if ( ! dtls1_process_buffered_records(s)) - return 0; +{ + int ssl_major, ssl_minor; + int i, n; + SSL3_RECORD *rr; + unsigned char *p = NULL; + unsigned short version; + DTLS1_BITMAP *bitmap; + unsigned int is_next_epoch; + + rr = &(s->s3->rrec); + + again: + /* + * The epoch may have changed. If so, process all the pending records. + * This is a non-blocking operation. + */ + if (!dtls1_process_buffered_records(s)) + return -1; + + /* if we're renegotiating, then there may be buffered records */ + if (dtls1_get_processed_record(s)) + return 1; + + /* get something from the wire */ + /* check if we have the header */ + if ((s->rstate != SSL_ST_READ_BODY) || + (s->packet_length < DTLS1_RT_HEADER_LENGTH)) { + n = ssl3_read_n(s, DTLS1_RT_HEADER_LENGTH, s->s3->rbuf.len, 0); + /* read timeout is handled by dtls1_read_bytes */ + if (n <= 0) + return (n); /* error or non-blocking */ + + /* this packet contained a partial record, dump it */ + if (s->packet_length != DTLS1_RT_HEADER_LENGTH) { + s->packet_length = 0; + goto again; + } - /* if we're renegotiating, then there may be buffered records */ - if (dtls1_get_processed_record(s)) - return 1; - - /* get something from the wire */ -again: - /* check if we have the header */ - if ( (s->rstate != SSL_ST_READ_BODY) || - (s->packet_length < DTLS1_RT_HEADER_LENGTH)) - { - n=ssl3_read_n(s, DTLS1_RT_HEADER_LENGTH, s->s3->rbuf.len, 0); - /* read timeout is handled by dtls1_read_bytes */ - if (n <= 0) return(n); /* error or non-blocking */ - - OPENSSL_assert(s->packet_length == DTLS1_RT_HEADER_LENGTH); - - s->rstate=SSL_ST_READ_BODY; - - p=s->packet; - - /* Pull apart the header into the DTLS1_RECORD */ - rr->type= *(p++); - ssl_major= *(p++); - ssl_minor= *(p++); - version=(ssl_major<<8)|ssl_minor; - - /* sequence number is 64 bits, with top 2 bytes = epoch */ - n2s(p,rr->epoch); - - memcpy(&(s->s3->read_sequence[2]), p, 6); - p+=6; - - n2s(p,rr->length); - - /* Lets check version */ - if (!s->first_packet) - { - if (version != s->version) - { - SSLerr(SSL_F_DTLS1_GET_RECORD,SSL_R_WRONG_VERSION_NUMBER); - /* Send back error using their - * version number :-) */ - s->version=version; - al=SSL_AD_PROTOCOL_VERSION; - goto f_err; - } - } - - if ((version & 0xff00) != (DTLS1_VERSION & 0xff00)) - { - SSLerr(SSL_F_DTLS1_GET_RECORD,SSL_R_WRONG_VERSION_NUMBER); - goto err; - } - - if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH) - { - al=SSL_AD_RECORD_OVERFLOW; - SSLerr(SSL_F_DTLS1_GET_RECORD,SSL_R_PACKET_LENGTH_TOO_LONG); - goto f_err; - } - - /* now s->rstate == SSL_ST_READ_BODY */ - } - - /* s->rstate == SSL_ST_READ_BODY, get and decode the data */ - - if (rr->length > s->packet_length-DTLS1_RT_HEADER_LENGTH) - { - /* now s->packet_length == DTLS1_RT_HEADER_LENGTH */ - i=rr->length; - n=ssl3_read_n(s,i,i,1); - if (n <= 0) return(n); /* error or non-blocking io */ - - /* this packet contained a partial record, dump it */ - if ( n != i) - { - s->packet_length = 0; - goto again; - } - - /* now n == rr->length, - * and s->packet_length == DTLS1_RT_HEADER_LENGTH + rr->length */ - } - s->rstate=SSL_ST_READ_HEADER; /* set state for later operations */ - - /* match epochs. NULL means the packet is dropped on the floor */ - bitmap = dtls1_get_bitmap(s, rr, &is_next_epoch); - if ( bitmap == NULL) - { - s->packet_length = 0; /* dump this record */ - goto again; /* get another record */ - } - - /* check whether this is a repeat, or aged record */ - if ( ! dtls1_record_replay_check(s, bitmap)) - { - s->packet_length=0; /* dump this record */ - goto again; /* get another record */ - } - - /* just read a 0 length packet */ - if (rr->length == 0) goto again; - - /* If this record is from the next epoch (either HM or ALERT), - * buffer it since it cannot be processed at this time. Records - * from the next epoch are marked as received even though they - * are not processed, so as to prevent any potential resource - * DoS attack */ - if (is_next_epoch) - { - dtls1_record_bitmap_update(s, bitmap); - dtls1_buffer_record(s, &(s->d1->unprocessed_rcds), rr->seq_num); - s->packet_length = 0; - goto again; - } - - if ( ! dtls1_process_record(s)) - return(0); - - dtls1_clear_timeouts(s); /* done waiting */ - return(1); - -f_err: - ssl3_send_alert(s,SSL3_AL_FATAL,al); -err: - return(0); - } - -/* Return up to 'len' payload bytes received in 'type' records. + s->rstate = SSL_ST_READ_BODY; + + p = s->packet; + + if (s->msg_callback) + s->msg_callback(0, 0, SSL3_RT_HEADER, p, DTLS1_RT_HEADER_LENGTH, + s, s->msg_callback_arg); + + /* Pull apart the header into the DTLS1_RECORD */ + rr->type = *(p++); + ssl_major = *(p++); + ssl_minor = *(p++); + version = (ssl_major << 8) | ssl_minor; + + /* sequence number is 64 bits, with top 2 bytes = epoch */ + n2s(p, rr->epoch); + + memcpy(&(s->s3->read_sequence[2]), p, 6); + p += 6; + + n2s(p, rr->length); + + /* Lets check version */ + if (!s->first_packet) { + if (version != s->version) { + /* unexpected version, silently discard */ + rr->length = 0; + s->packet_length = 0; + goto again; + } + } + + if ((version & 0xff00) != (s->version & 0xff00)) { + /* wrong version, silently discard record */ + rr->length = 0; + s->packet_length = 0; + goto again; + } + + if (rr->length > SSL3_RT_MAX_ENCRYPTED_LENGTH) { + /* record too long, silently discard it */ + rr->length = 0; + s->packet_length = 0; + goto again; + } + + /* now s->rstate == SSL_ST_READ_BODY */ + } + + /* s->rstate == SSL_ST_READ_BODY, get and decode the data */ + + if (rr->length > s->packet_length - DTLS1_RT_HEADER_LENGTH) { + /* now s->packet_length == DTLS1_RT_HEADER_LENGTH */ + i = rr->length; + n = ssl3_read_n(s, i, i, 1); + /* this packet contained a partial record, dump it */ + if (n != i) { + rr->length = 0; + s->packet_length = 0; + goto again; + } + + /* + * now n == rr->length, and s->packet_length == + * DTLS1_RT_HEADER_LENGTH + rr->length + */ + } + s->rstate = SSL_ST_READ_HEADER; /* set state for later operations */ + + /* match epochs. NULL means the packet is dropped on the floor */ + bitmap = dtls1_get_bitmap(s, rr, &is_next_epoch); + if (bitmap == NULL) { + rr->length = 0; + s->packet_length = 0; /* dump this record */ + goto again; /* get another record */ + } +#ifndef OPENSSL_NO_SCTP + /* Only do replay check if no SCTP bio */ + if (!BIO_dgram_is_sctp(SSL_get_rbio(s))) { +#endif + /* + * Check whether this is a repeat, or aged record. Don't check if + * we're listening and this message is a ClientHello. They can look + * as if they're replayed, since they arrive from different + * connections and would be dropped unnecessarily. + */ + if (!(s->d1->listen && rr->type == SSL3_RT_HANDSHAKE && + s->packet_length > DTLS1_RT_HEADER_LENGTH && + s->packet[DTLS1_RT_HEADER_LENGTH] == SSL3_MT_CLIENT_HELLO) && + !dtls1_record_replay_check(s, bitmap)) { + rr->length = 0; + s->packet_length = 0; /* dump this record */ + goto again; /* get another record */ + } +#ifndef OPENSSL_NO_SCTP + } +#endif + + /* just read a 0 length packet */ + if (rr->length == 0) + goto again; + + /* + * If this record is from the next epoch (either HM or ALERT), and a + * handshake is currently in progress, buffer it since it cannot be + * processed at this time. However, do not buffer anything while + * listening. + */ + if (is_next_epoch) { + if ((SSL_in_init(s) || s->in_handshake) && !s->d1->listen) { + if (dtls1_buffer_record + (s, &(s->d1->unprocessed_rcds), rr->seq_num) < 0) + return -1; + } + rr->length = 0; + s->packet_length = 0; + goto again; + } + + if (!dtls1_process_record(s, bitmap)) { + rr->length = 0; + s->packet_length = 0; /* dump this record */ + goto again; /* get another record */ + } + + return (1); + +} + +/*- + * Return up to 'len' payload bytes received in 'type' records. * 'type' is one of the following: * * - SSL3_RT_HANDSHAKE (when ssl3_get_message calls us) @@ -694,1027 +842,1179 @@ err: * none of our business */ int dtls1_read_bytes(SSL *s, int type, unsigned char *buf, int len, int peek) - { - int al,i,j,ret; - unsigned int n; - SSL3_RECORD *rr; - void (*cb)(const SSL *ssl,int type2,int val)=NULL; +{ + int al, i, j, ret; + unsigned int n; + SSL3_RECORD *rr; + void (*cb) (const SSL *ssl, int type2, int val) = NULL; - if (s->s3->rbuf.buf == NULL) /* Not initialized yet */ - if (!ssl3_setup_buffers(s)) - return(-1); + if (s->s3->rbuf.buf == NULL) /* Not initialized yet */ + if (!ssl3_setup_buffers(s)) + return (-1); /* XXX: check what the second '&& type' is about */ - if ((type && (type != SSL3_RT_APPLICATION_DATA) && - (type != SSL3_RT_HANDSHAKE) && type) || - (peek && (type != SSL3_RT_APPLICATION_DATA))) - { - SSLerr(SSL_F_DTLS1_READ_BYTES, ERR_R_INTERNAL_ERROR); - return -1; - } - - /* check whether there's a handshake message (client hello?) waiting */ - if ( (ret = have_handshake_fragment(s, type, buf, len, peek))) - return ret; - - /* Now s->d1->handshake_fragment_len == 0 if type == SSL3_RT_HANDSHAKE. */ - - if (!s->in_handshake && SSL_in_init(s)) - { - /* type == SSL3_RT_APPLICATION_DATA */ - i=s->handshake_func(s); - if (i < 0) return(i); - if (i == 0) - { - SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE); - return(-1); - } - } - -start: - s->rwstate=SSL_NOTHING; - - /* s->s3->rrec.type - is the type of record - * s->s3->rrec.data, - data - * s->s3->rrec.off, - offset into 'data' for next read - * s->s3->rrec.length, - number of bytes. */ - rr = &(s->s3->rrec); - - /* get new packet if necessary */ - if ((rr->length == 0) || (s->rstate == SSL_ST_READ_BODY)) - { - ret=dtls1_get_record(s); - if (ret <= 0) - { - ret = dtls1_read_failed(s, ret); - /* anything other than a timeout is an error */ - if (ret <= 0) - return(ret); - else - goto start; - } - } - - /* we now have a packet which can be read and processed */ - - if (s->s3->change_cipher_spec /* set when we receive ChangeCipherSpec, - * reset by ssl3_get_finished */ - && (rr->type != SSL3_RT_HANDSHAKE)) - { - al=SSL_AD_UNEXPECTED_MESSAGE; - SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_DATA_BETWEEN_CCS_AND_FINISHED); - goto err; - } - - /* If the other end has shut down, throw anything we read away - * (even in 'peek' mode) */ - if (s->shutdown & SSL_RECEIVED_SHUTDOWN) - { - rr->length=0; - s->rwstate=SSL_NOTHING; - return(0); - } - - - if (type == rr->type) /* SSL3_RT_APPLICATION_DATA or SSL3_RT_HANDSHAKE */ - { - /* make sure that we are not getting application data when we - * are doing a handshake for the first time */ - if (SSL_in_init(s) && (type == SSL3_RT_APPLICATION_DATA) && - (s->enc_read_ctx == NULL)) - { - al=SSL_AD_UNEXPECTED_MESSAGE; - SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_APP_DATA_IN_HANDSHAKE); - goto f_err; - } - - if (len <= 0) return(len); - - if ((unsigned int)len > rr->length) - n = rr->length; - else - n = (unsigned int)len; - - memcpy(buf,&(rr->data[rr->off]),n); - if (!peek) - { - rr->length-=n; - rr->off+=n; - if (rr->length == 0) - { - s->rstate=SSL_ST_READ_HEADER; - rr->off=0; - } - } - return(n); - } - - - /* If we get here, then type != rr->type; if we have a handshake - * message, then it was unexpected (Hello Request or Client Hello). */ - - /* In case of record types for which we have 'fragment' storage, - * fill that so that we can process the data at a fixed place. - */ - { - unsigned int k, dest_maxlen = 0; - unsigned char *dest = NULL; - unsigned int *dest_len = NULL; - - if (rr->type == SSL3_RT_HANDSHAKE) - { - dest_maxlen = sizeof s->d1->handshake_fragment; - dest = s->d1->handshake_fragment; - dest_len = &s->d1->handshake_fragment_len; - } - else if (rr->type == SSL3_RT_ALERT) - { - dest_maxlen = sizeof(s->d1->alert_fragment); - dest = s->d1->alert_fragment; - dest_len = &s->d1->alert_fragment_len; - } - /* else it's a CCS message, or it's wrong */ - else if (rr->type != SSL3_RT_CHANGE_CIPHER_SPEC) - { - /* Not certain if this is the right error handling */ - al=SSL_AD_UNEXPECTED_MESSAGE; - SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_UNEXPECTED_RECORD); - goto f_err; - } - - - if (dest_maxlen > 0) - { - /* XDTLS: In a pathalogical case, the Client Hello - * may be fragmented--don't always expect dest_maxlen bytes */ - if ( rr->length < dest_maxlen) - { - s->rstate=SSL_ST_READ_HEADER; - rr->length = 0; - goto start; - } - - /* now move 'n' bytes: */ - for ( k = 0; k < dest_maxlen; k++) - { - dest[k] = rr->data[rr->off++]; - rr->length--; - } - *dest_len = dest_maxlen; - } - } - - /* s->d1->handshake_fragment_len == 12 iff rr->type == SSL3_RT_HANDSHAKE; - * s->d1->alert_fragment_len == 7 iff rr->type == SSL3_RT_ALERT. - * (Possibly rr is 'empty' now, i.e. rr->length may be 0.) */ - - /* If we are a client, check for an incoming 'Hello Request': */ - if ((!s->server) && - (s->d1->handshake_fragment_len >= DTLS1_HM_HEADER_LENGTH) && - (s->d1->handshake_fragment[0] == SSL3_MT_HELLO_REQUEST) && - (s->session != NULL) && (s->session->cipher != NULL)) - { - s->d1->handshake_fragment_len = 0; - - if ((s->d1->handshake_fragment[1] != 0) || - (s->d1->handshake_fragment[2] != 0) || - (s->d1->handshake_fragment[3] != 0)) - { - al=SSL_AD_DECODE_ERROR; - SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_BAD_HELLO_REQUEST); - goto err; - } - - /* no need to check sequence number on HELLO REQUEST messages */ - - if (s->msg_callback) - s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE, - s->d1->handshake_fragment, 4, s, s->msg_callback_arg); - - if (SSL_is_init_finished(s) && - !(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS) && - !s->s3->renegotiate) - { - ssl3_renegotiate(s); - if (ssl3_renegotiate_check(s)) - { - i=s->handshake_func(s); - if (i < 0) return(i); - if (i == 0) - { - SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE); - return(-1); - } - - if (!(s->mode & SSL_MODE_AUTO_RETRY)) - { - if (s->s3->rbuf.left == 0) /* no read-ahead left? */ - { - BIO *bio; - /* In the case where we try to read application data, - * but we trigger an SSL handshake, we return -1 with - * the retry option set. Otherwise renegotiation may - * cause nasty problems in the blocking world */ - s->rwstate=SSL_READING; - bio=SSL_get_rbio(s); - BIO_clear_retry_flags(bio); - BIO_set_retry_read(bio); - return(-1); - } - } - } - } - /* we either finished a handshake or ignored the request, - * now try again to obtain the (application) data we were asked for */ - goto start; - } - - if (s->d1->alert_fragment_len >= DTLS1_AL_HEADER_LENGTH) - { - int alert_level = s->d1->alert_fragment[0]; - int alert_descr = s->d1->alert_fragment[1]; - - s->d1->alert_fragment_len = 0; - - if (s->msg_callback) - s->msg_callback(0, s->version, SSL3_RT_ALERT, - s->d1->alert_fragment, 2, s, s->msg_callback_arg); - - if (s->info_callback != NULL) - cb=s->info_callback; - else if (s->ctx->info_callback != NULL) - cb=s->ctx->info_callback; - - if (cb != NULL) - { - j = (alert_level << 8) | alert_descr; - cb(s, SSL_CB_READ_ALERT, j); - } - - if (alert_level == 1) /* warning */ - { - s->s3->warn_alert = alert_descr; - if (alert_descr == SSL_AD_CLOSE_NOTIFY) - { - s->shutdown |= SSL_RECEIVED_SHUTDOWN; - return(0); - } + if ((type && (type != SSL3_RT_APPLICATION_DATA) && + (type != SSL3_RT_HANDSHAKE) && type) || + (peek && (type != SSL3_RT_APPLICATION_DATA))) { + SSLerr(SSL_F_DTLS1_READ_BYTES, ERR_R_INTERNAL_ERROR); + return -1; + } + + /* + * check whether there's a handshake message (client hello?) waiting + */ + if ((ret = have_handshake_fragment(s, type, buf, len, peek))) + return ret; + + /* + * Now s->d1->handshake_fragment_len == 0 if type == SSL3_RT_HANDSHAKE. + */ + +#ifndef OPENSSL_NO_SCTP + /* + * Continue handshake if it had to be interrupted to read app data with + * SCTP. + */ + if ((!s->in_handshake && SSL_in_init(s)) || + (BIO_dgram_is_sctp(SSL_get_rbio(s)) && + (s->state == DTLS1_SCTP_ST_SR_READ_SOCK + || s->state == DTLS1_SCTP_ST_CR_READ_SOCK) + && s->s3->in_read_app_data != 2)) +#else + if (!s->in_handshake && SSL_in_init(s)) +#endif + { + /* type == SSL3_RT_APPLICATION_DATA */ + i = s->handshake_func(s); + if (i < 0) + return (i); + if (i == 0) { + SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_SSL_HANDSHAKE_FAILURE); + return (-1); + } + } + + start: + s->rwstate = SSL_NOTHING; + + /*- + * s->s3->rrec.type - is the type of record + * s->s3->rrec.data, - data + * s->s3->rrec.off, - offset into 'data' for next read + * s->s3->rrec.length, - number of bytes. + */ + rr = &(s->s3->rrec); + + /* + * We are not handshaking and have no data yet, so process data buffered + * during the last handshake in advance, if any. + */ + if (s->state == SSL_ST_OK && rr->length == 0) { + pitem *item; + item = pqueue_pop(s->d1->buffered_app_data.q); + if (item) { +#ifndef OPENSSL_NO_SCTP + /* Restore bio_dgram_sctp_rcvinfo struct */ + if (BIO_dgram_is_sctp(SSL_get_rbio(s))) { + DTLS1_RECORD_DATA *rdata = (DTLS1_RECORD_DATA *)item->data; + BIO_ctrl(SSL_get_rbio(s), BIO_CTRL_DGRAM_SCTP_SET_RCVINFO, + sizeof(rdata->recordinfo), &rdata->recordinfo); + } +#endif + + dtls1_copy_record(s, item); + + OPENSSL_free(item->data); + pitem_free(item); + } + } + + /* Check for timeout */ + if (dtls1_handle_timeout(s) > 0) + goto start; + + /* get new packet if necessary */ + if ((rr->length == 0) || (s->rstate == SSL_ST_READ_BODY)) { + ret = dtls1_get_record(s); + if (ret <= 0) { + ret = dtls1_read_failed(s, ret); + /* anything other than a timeout is an error */ + if (ret <= 0) + return (ret); + else + goto start; + } + } + + if (s->d1->listen && rr->type != SSL3_RT_HANDSHAKE) { + rr->length = 0; + goto start; + } + + /* + * Reset the count of consecutive warning alerts if we've got a non-empty + * record that isn't an alert. + */ + if (rr->type != SSL3_RT_ALERT && rr->length != 0) + s->cert->alert_count = 0; + + /* we now have a packet which can be read and processed */ + + if (s->s3->change_cipher_spec /* set when we receive ChangeCipherSpec, + * reset by ssl3_get_finished */ + && (rr->type != SSL3_RT_HANDSHAKE)) { + /* + * We now have application data between CCS and Finished. Most likely + * the packets were reordered on their way, so buffer the application + * data for later processing rather than dropping the connection. + */ + if (dtls1_buffer_record(s, &(s->d1->buffered_app_data), rr->seq_num) < + 0) { + SSLerr(SSL_F_DTLS1_READ_BYTES, ERR_R_INTERNAL_ERROR); + return -1; + } + rr->length = 0; + goto start; + } + + /* + * If the other end has shut down, throw anything we read away (even in + * 'peek' mode) + */ + if (s->shutdown & SSL_RECEIVED_SHUTDOWN) { + rr->length = 0; + s->rwstate = SSL_NOTHING; + return (0); + } + + if (type == rr->type) { /* SSL3_RT_APPLICATION_DATA or + * SSL3_RT_HANDSHAKE */ + /* + * make sure that we are not getting application data when we are + * doing a handshake for the first time + */ + if (SSL_in_init(s) && (type == SSL3_RT_APPLICATION_DATA) && + (s->enc_read_ctx == NULL)) { + al = SSL_AD_UNEXPECTED_MESSAGE; + SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_APP_DATA_IN_HANDSHAKE); + goto f_err; + } + + if (len <= 0) + return (len); + + if ((unsigned int)len > rr->length) + n = rr->length; + else + n = (unsigned int)len; + + memcpy(buf, &(rr->data[rr->off]), n); + if (!peek) { + rr->length -= n; + rr->off += n; + if (rr->length == 0) { + s->rstate = SSL_ST_READ_HEADER; + rr->off = 0; + } + } +#ifndef OPENSSL_NO_SCTP + /* + * We were about to renegotiate but had to read belated application + * data first, so retry. + */ + if (BIO_dgram_is_sctp(SSL_get_rbio(s)) && + rr->type == SSL3_RT_APPLICATION_DATA && + (s->state == DTLS1_SCTP_ST_SR_READ_SOCK + || s->state == DTLS1_SCTP_ST_CR_READ_SOCK)) { + s->rwstate = SSL_READING; + BIO_clear_retry_flags(SSL_get_rbio(s)); + BIO_set_retry_read(SSL_get_rbio(s)); + } + + /* + * We might had to delay a close_notify alert because of reordered + * app data. If there was an alert and there is no message to read + * anymore, finally set shutdown. + */ + if (BIO_dgram_is_sctp(SSL_get_rbio(s)) && + s->d1->shutdown_received + && !BIO_dgram_sctp_msg_waiting(SSL_get_rbio(s))) { + s->shutdown |= SSL_RECEIVED_SHUTDOWN; + return (0); + } +#endif + return (n); + } + + /* + * If we get here, then type != rr->type; if we have a handshake message, + * then it was unexpected (Hello Request or Client Hello). + */ + + /* + * In case of record types for which we have 'fragment' storage, fill + * that so that we can process the data at a fixed place. + */ + { + unsigned int k, dest_maxlen = 0; + unsigned char *dest = NULL; + unsigned int *dest_len = NULL; + + if (rr->type == SSL3_RT_HANDSHAKE) { + dest_maxlen = sizeof s->d1->handshake_fragment; + dest = s->d1->handshake_fragment; + dest_len = &s->d1->handshake_fragment_len; + } else if (rr->type == SSL3_RT_ALERT) { + dest_maxlen = sizeof(s->d1->alert_fragment); + dest = s->d1->alert_fragment; + dest_len = &s->d1->alert_fragment_len; + } +#ifndef OPENSSL_NO_HEARTBEATS + else if (rr->type == TLS1_RT_HEARTBEAT) { + dtls1_process_heartbeat(s); + + /* Exit and notify application to read again */ + rr->length = 0; + s->rwstate = SSL_READING; + BIO_clear_retry_flags(SSL_get_rbio(s)); + BIO_set_retry_read(SSL_get_rbio(s)); + return (-1); + } +#endif + /* else it's a CCS message, or application data or wrong */ + else if (rr->type != SSL3_RT_CHANGE_CIPHER_SPEC) { + /* + * Application data while renegotiating is allowed. Try again + * reading. + */ + if (rr->type == SSL3_RT_APPLICATION_DATA) { + BIO *bio; + s->s3->in_read_app_data = 2; + bio = SSL_get_rbio(s); + s->rwstate = SSL_READING; + BIO_clear_retry_flags(bio); + BIO_set_retry_read(bio); + return (-1); + } + + /* Not certain if this is the right error handling */ + al = SSL_AD_UNEXPECTED_MESSAGE; + SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_UNEXPECTED_RECORD); + goto f_err; + } + + if (dest_maxlen > 0) { + /* + * XDTLS: In a pathalogical case, the Client Hello may be + * fragmented--don't always expect dest_maxlen bytes + */ + if (rr->length < dest_maxlen) { +#ifdef DTLS1_AD_MISSING_HANDSHAKE_MESSAGE + /* + * for normal alerts rr->length is 2, while + * dest_maxlen is 7 if we were to handle this + * non-existing alert... + */ + FIX ME +#endif + s->rstate = SSL_ST_READ_HEADER; + rr->length = 0; + goto start; + } + + /* now move 'n' bytes: */ + for (k = 0; k < dest_maxlen; k++) { + dest[k] = rr->data[rr->off++]; + rr->length--; + } + *dest_len = dest_maxlen; + } + } + + /*- + * s->d1->handshake_fragment_len == 12 iff rr->type == SSL3_RT_HANDSHAKE; + * s->d1->alert_fragment_len == 7 iff rr->type == SSL3_RT_ALERT. + * (Possibly rr is 'empty' now, i.e. rr->length may be 0.) + */ + + /* If we are a client, check for an incoming 'Hello Request': */ + if ((!s->server) && + (s->d1->handshake_fragment_len >= DTLS1_HM_HEADER_LENGTH) && + (s->d1->handshake_fragment[0] == SSL3_MT_HELLO_REQUEST) && + (s->session != NULL) && (s->session->cipher != NULL)) { + s->d1->handshake_fragment_len = 0; + + if ((s->d1->handshake_fragment[1] != 0) || + (s->d1->handshake_fragment[2] != 0) || + (s->d1->handshake_fragment[3] != 0)) { + al = SSL_AD_DECODE_ERROR; + SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_BAD_HELLO_REQUEST); + goto f_err; + } + + /* + * no need to check sequence number on HELLO REQUEST messages + */ + + if (s->msg_callback) + s->msg_callback(0, s->version, SSL3_RT_HANDSHAKE, + s->d1->handshake_fragment, 4, s, + s->msg_callback_arg); + + if (SSL_is_init_finished(s) && + !(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS) && + !s->s3->renegotiate) { + s->d1->handshake_read_seq++; + s->new_session = 1; + ssl3_renegotiate(s); + if (ssl3_renegotiate_check(s)) { + i = s->handshake_func(s); + if (i < 0) + return (i); + if (i == 0) { + SSLerr(SSL_F_DTLS1_READ_BYTES, + SSL_R_SSL_HANDSHAKE_FAILURE); + return (-1); + } + + if (!(s->mode & SSL_MODE_AUTO_RETRY)) { + if (s->s3->rbuf.left == 0) { /* no read-ahead left? */ + BIO *bio; + /* + * In the case where we try to read application data, + * but we trigger an SSL handshake, we return -1 with + * the retry option set. Otherwise renegotiation may + * cause nasty problems in the blocking world + */ + s->rwstate = SSL_READING; + bio = SSL_get_rbio(s); + BIO_clear_retry_flags(bio); + BIO_set_retry_read(bio); + return (-1); + } + } + } + } + /* + * we either finished a handshake or ignored the request, now try + * again to obtain the (application) data we were asked for + */ + goto start; + } + + if (s->d1->alert_fragment_len >= DTLS1_AL_HEADER_LENGTH) { + int alert_level = s->d1->alert_fragment[0]; + int alert_descr = s->d1->alert_fragment[1]; + + s->d1->alert_fragment_len = 0; + + if (s->msg_callback) + s->msg_callback(0, s->version, SSL3_RT_ALERT, + s->d1->alert_fragment, 2, s, s->msg_callback_arg); + + if (s->info_callback != NULL) + cb = s->info_callback; + else if (s->ctx->info_callback != NULL) + cb = s->ctx->info_callback; + + if (cb != NULL) { + j = (alert_level << 8) | alert_descr; + cb(s, SSL_CB_READ_ALERT, j); + } + + if (alert_level == SSL3_AL_WARNING) { + s->s3->warn_alert = alert_descr; + + s->cert->alert_count++; + if (s->cert->alert_count == MAX_WARN_ALERT_COUNT) { + al = SSL_AD_UNEXPECTED_MESSAGE; + SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_TOO_MANY_WARN_ALERTS); + goto f_err; + } + + if (alert_descr == SSL_AD_CLOSE_NOTIFY) { +#ifndef OPENSSL_NO_SCTP + /* + * With SCTP and streams the socket may deliver app data + * after a close_notify alert. We have to check this first so + * that nothing gets discarded. + */ + if (BIO_dgram_is_sctp(SSL_get_rbio(s)) && + BIO_dgram_sctp_msg_waiting(SSL_get_rbio(s))) { + s->d1->shutdown_received = 1; + s->rwstate = SSL_READING; + BIO_clear_retry_flags(SSL_get_rbio(s)); + BIO_set_retry_read(SSL_get_rbio(s)); + return -1; + } +#endif + s->shutdown |= SSL_RECEIVED_SHUTDOWN; + return (0); + } #if 0 /* XXX: this is a possible improvement in the future */ - /* now check if it's a missing record */ - if (alert_descr == DTLS1_AD_MISSING_HANDSHAKE_MESSAGE) - { - unsigned short seq; - unsigned int frag_off; - unsigned char *p = &(s->d1->alert_fragment[2]); - - n2s(p, seq); - n2l3(p, frag_off); - - dtls1_retransmit_message(s, seq, frag_off, &found); - if ( ! found && SSL_in_init(s)) - { - /* fprintf( stderr,"in init = %d\n", SSL_in_init(s)); */ - /* requested a message not yet sent, - send an alert ourselves */ - ssl3_send_alert(s,SSL3_AL_WARNING, - DTLS1_AD_MISSING_HANDSHAKE_MESSAGE); - } - } + /* now check if it's a missing record */ + if (alert_descr == DTLS1_AD_MISSING_HANDSHAKE_MESSAGE) { + unsigned short seq; + unsigned int frag_off; + unsigned char *p = &(s->d1->alert_fragment[2]); + + n2s(p, seq); + n2l3(p, frag_off); + + dtls1_retransmit_message(s, + dtls1_get_queue_priority + (frag->msg_header.seq, 0), frag_off, + &found); + if (!found && SSL_in_init(s)) { + /* + * fprintf( stderr,"in init = %d\n", SSL_in_init(s)); + */ + /* + * requested a message not yet sent, send an alert + * ourselves + */ + ssl3_send_alert(s, SSL3_AL_WARNING, + DTLS1_AD_MISSING_HANDSHAKE_MESSAGE); + } + } #endif - } - else if (alert_level == 2) /* fatal */ - { - char tmp[16]; - - s->rwstate=SSL_NOTHING; - s->s3->fatal_alert = alert_descr; - SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_AD_REASON_OFFSET + alert_descr); - BIO_snprintf(tmp,sizeof tmp,"%d",alert_descr); - ERR_add_error_data(2,"SSL alert number ",tmp); - s->shutdown|=SSL_RECEIVED_SHUTDOWN; - SSL_CTX_remove_session(s->ctx,s->session); - return(0); - } - else - { - al=SSL_AD_ILLEGAL_PARAMETER; - SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_UNKNOWN_ALERT_TYPE); - goto f_err; - } - - goto start; - } - - if (s->shutdown & SSL_SENT_SHUTDOWN) /* but we have not received a shutdown */ - { - s->rwstate=SSL_NOTHING; - rr->length=0; - return(0); - } - - if (rr->type == SSL3_RT_CHANGE_CIPHER_SPEC) - { - struct ccs_header_st ccs_hdr; - - dtls1_get_ccs_header(rr->data, &ccs_hdr); - - /* 'Change Cipher Spec' is just a single byte, so we know - * exactly what the record payload has to look like */ - /* XDTLS: check that epoch is consistent */ - if ( (rr->length != DTLS1_CCS_HEADER_LENGTH) || - (rr->off != 0) || (rr->data[0] != SSL3_MT_CCS)) - { - i=SSL_AD_ILLEGAL_PARAMETER; - SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_BAD_CHANGE_CIPHER_SPEC); - goto err; - } - - rr->length=0; - - if (s->msg_callback) - s->msg_callback(0, s->version, SSL3_RT_CHANGE_CIPHER_SPEC, - rr->data, 1, s, s->msg_callback_arg); - - s->s3->change_cipher_spec=1; - if (!ssl3_do_change_cipher_spec(s)) - goto err; - - /* do this whenever CCS is processed */ - dtls1_reset_seq_numbers(s, SSL3_CC_READ); - - /* handshake read seq is reset upon handshake completion */ - s->d1->handshake_read_seq++; - - goto start; - } - - /* Unexpected handshake message (Client Hello, or protocol violation) */ - if ((s->d1->handshake_fragment_len >= DTLS1_HM_HEADER_LENGTH) && - !s->in_handshake) - { - struct hm_header_st msg_hdr; - - /* this may just be a stale retransmit */ - dtls1_get_message_header(rr->data, &msg_hdr); - if( rr->epoch != s->d1->r_epoch) - { - rr->length = 0; - goto start; - } - - if (((s->state&SSL_ST_MASK) == SSL_ST_OK) && - !(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS)) - { -#if 0 /* worked only because C operator preferences are not as expected (and - * because this is not really needed for clients except for detecting - * protocol violations): */ - s->state=SSL_ST_BEFORE|(s->server) - ?SSL_ST_ACCEPT - :SSL_ST_CONNECT; + } else if (alert_level == SSL3_AL_FATAL) { + char tmp[16]; + + s->rwstate = SSL_NOTHING; + s->s3->fatal_alert = alert_descr; + SSLerr(SSL_F_DTLS1_READ_BYTES, + SSL_AD_REASON_OFFSET + alert_descr); + BIO_snprintf(tmp, sizeof tmp, "%d", alert_descr); + ERR_add_error_data(2, "SSL alert number ", tmp); + s->shutdown |= SSL_RECEIVED_SHUTDOWN; + SSL_CTX_remove_session(s->session_ctx, s->session); + return (0); + } else { + al = SSL_AD_ILLEGAL_PARAMETER; + SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_UNKNOWN_ALERT_TYPE); + goto f_err; + } + + goto start; + } + + if (s->shutdown & SSL_SENT_SHUTDOWN) { /* but we have not received a + * shutdown */ + s->rwstate = SSL_NOTHING; + rr->length = 0; + return (0); + } + + if (rr->type == SSL3_RT_CHANGE_CIPHER_SPEC) { + struct ccs_header_st ccs_hdr; + unsigned int ccs_hdr_len = DTLS1_CCS_HEADER_LENGTH; + + dtls1_get_ccs_header(rr->data, &ccs_hdr); + + if (s->version == DTLS1_BAD_VER) + ccs_hdr_len = 3; + + /* + * 'Change Cipher Spec' is just a single byte, so we know exactly + * what the record payload has to look like + */ + /* XDTLS: check that epoch is consistent */ + if ((rr->length != ccs_hdr_len) || + (rr->off != 0) || (rr->data[0] != SSL3_MT_CCS)) { + al = SSL_AD_ILLEGAL_PARAMETER; + SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_BAD_CHANGE_CIPHER_SPEC); + goto f_err; + } + + rr->length = 0; + + if (s->msg_callback) + s->msg_callback(0, s->version, SSL3_RT_CHANGE_CIPHER_SPEC, + rr->data, 1, s, s->msg_callback_arg); + + /* + * We can't process a CCS now, because previous handshake messages + * are still missing, so just drop it. + */ + if (!s->d1->change_cipher_spec_ok) { + goto start; + } + + s->d1->change_cipher_spec_ok = 0; + + s->s3->change_cipher_spec = 1; + if (!ssl3_do_change_cipher_spec(s)) + goto err; + + /* do this whenever CCS is processed */ + dtls1_reset_seq_numbers(s, SSL3_CC_READ); + + if (s->version == DTLS1_BAD_VER) + s->d1->handshake_read_seq++; + +#ifndef OPENSSL_NO_SCTP + /* + * Remember that a CCS has been received, so that an old key of + * SCTP-Auth can be deleted when a CCS is sent. Will be ignored if no + * SCTP is used + */ + BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SCTP_AUTH_CCS_RCVD, 1, NULL); +#endif + + goto start; + } + + /* + * Unexpected handshake message (Client Hello, or protocol violation) + */ + if ((s->d1->handshake_fragment_len >= DTLS1_HM_HEADER_LENGTH) && + !s->in_handshake) { + struct hm_header_st msg_hdr; + + /* this may just be a stale retransmit */ + dtls1_get_message_header(rr->data, &msg_hdr); + if (rr->epoch != s->d1->r_epoch) { + rr->length = 0; + goto start; + } + + /* + * If we are server, we may have a repeated FINISHED of the client + * here, then retransmit our CCS and FINISHED. + */ + if (msg_hdr.type == SSL3_MT_FINISHED) { + if (dtls1_check_timeout_num(s) < 0) + return -1; + + dtls1_retransmit_buffered_messages(s); + rr->length = 0; + goto start; + } + + if (((s->state & SSL_ST_MASK) == SSL_ST_OK) && + !(s->s3->flags & SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS)) { +#if 0 /* worked only because C operator preferences + * are not as expected (and because this is + * not really needed for clients except for + * detecting protocol violations): */ + s->state = SSL_ST_BEFORE | (s->server) + ? SSL_ST_ACCEPT : SSL_ST_CONNECT; #else - s->state = s->server ? SSL_ST_ACCEPT : SSL_ST_CONNECT; + s->state = s->server ? SSL_ST_ACCEPT : SSL_ST_CONNECT; #endif - s->new_session=1; - } - i=s->handshake_func(s); - if (i < 0) return(i); - if (i == 0) - { - SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE); - return(-1); - } - - if (!(s->mode & SSL_MODE_AUTO_RETRY)) - { - if (s->s3->rbuf.left == 0) /* no read-ahead left? */ - { - BIO *bio; - /* In the case where we try to read application data, - * but we trigger an SSL handshake, we return -1 with - * the retry option set. Otherwise renegotiation may - * cause nasty problems in the blocking world */ - s->rwstate=SSL_READING; - bio=SSL_get_rbio(s); - BIO_clear_retry_flags(bio); - BIO_set_retry_read(bio); - return(-1); - } - } - goto start; - } - - switch (rr->type) - { - default: + s->renegotiate = 1; + s->new_session = 1; + } + i = s->handshake_func(s); + if (i < 0) + return (i); + if (i == 0) { + SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_SSL_HANDSHAKE_FAILURE); + return (-1); + } + + if (!(s->mode & SSL_MODE_AUTO_RETRY)) { + if (s->s3->rbuf.left == 0) { /* no read-ahead left? */ + BIO *bio; + /* + * In the case where we try to read application data, but we + * trigger an SSL handshake, we return -1 with the retry + * option set. Otherwise renegotiation may cause nasty + * problems in the blocking world + */ + s->rwstate = SSL_READING; + bio = SSL_get_rbio(s); + BIO_clear_retry_flags(bio); + BIO_set_retry_read(bio); + return (-1); + } + } + goto start; + } + + switch (rr->type) { + default: #ifndef OPENSSL_NO_TLS - /* TLS just ignores unknown message types */ - if (s->version == TLS1_VERSION) - { - rr->length = 0; - goto start; - } + /* TLS just ignores unknown message types */ + if (s->version == TLS1_VERSION) { + rr->length = 0; + goto start; + } #endif - al=SSL_AD_UNEXPECTED_MESSAGE; - SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_UNEXPECTED_RECORD); - goto f_err; - case SSL3_RT_CHANGE_CIPHER_SPEC: - case SSL3_RT_ALERT: - case SSL3_RT_HANDSHAKE: - /* we already handled all of these, with the possible exception - * of SSL3_RT_HANDSHAKE when s->in_handshake is set, but that - * should not happen when type != rr->type */ - al=SSL_AD_UNEXPECTED_MESSAGE; - SSLerr(SSL_F_DTLS1_READ_BYTES,ERR_R_INTERNAL_ERROR); - goto f_err; - case SSL3_RT_APPLICATION_DATA: - /* At this point, we were expecting handshake data, - * but have application data. If the library was - * running inside ssl3_read() (i.e. in_read_app_data - * is set) and it makes sense to read application data - * at this point (session renegotiation not yet started), - * we will indulge it. - */ - if (s->s3->in_read_app_data && - (s->s3->total_renegotiations != 0) && - (( - (s->state & SSL_ST_CONNECT) && - (s->state >= SSL3_ST_CW_CLNT_HELLO_A) && - (s->state <= SSL3_ST_CR_SRVR_HELLO_A) - ) || ( - (s->state & SSL_ST_ACCEPT) && - (s->state <= SSL3_ST_SW_HELLO_REQ_A) && - (s->state >= SSL3_ST_SR_CLNT_HELLO_A) - ) - )) - { - s->s3->in_read_app_data=2; - return(-1); - } - else - { - al=SSL_AD_UNEXPECTED_MESSAGE; - SSLerr(SSL_F_DTLS1_READ_BYTES,SSL_R_UNEXPECTED_RECORD); - goto f_err; - } - } - /* not reached */ - -f_err: - ssl3_send_alert(s,SSL3_AL_FATAL,al); -err: - return(-1); - } - -int -dtls1_write_app_data_bytes(SSL *s, int type, const void *buf_, int len) - { - unsigned int n,tot; - int i; - - if (SSL_in_init(s) && !s->in_handshake) - { - i=s->handshake_func(s); - if (i < 0) return(i); - if (i == 0) - { - SSLerr(SSL_F_DTLS1_WRITE_APP_DATA_BYTES,SSL_R_SSL_HANDSHAKE_FAILURE); - return -1; - } - } - - tot = s->s3->wnum; - n = len - tot; - - while( n) - { - /* dtls1_write_bytes sends one record at a time, sized according to - * the currently known MTU */ - i = dtls1_write_bytes(s, type, buf_, len); - if (i <= 0) return i; - - if ((i == (int)n) || - (type == SSL3_RT_APPLICATION_DATA && - (s->mode & SSL_MODE_ENABLE_PARTIAL_WRITE))) - { - /* next chunk of data should get another prepended empty fragment - * in ciphersuites with known-IV weakness: */ - s->s3->empty_fragment_done = 0; - return tot+i; - } - - tot += i; - n-=i; - } - - return tot; - } - - - /* this only happens when a client hello is received and a handshake - * is started. */ + al = SSL_AD_UNEXPECTED_MESSAGE; + SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_UNEXPECTED_RECORD); + goto f_err; + case SSL3_RT_CHANGE_CIPHER_SPEC: + case SSL3_RT_ALERT: + case SSL3_RT_HANDSHAKE: + /* + * we already handled all of these, with the possible exception of + * SSL3_RT_HANDSHAKE when s->in_handshake is set, but that should not + * happen when type != rr->type + */ + al = SSL_AD_UNEXPECTED_MESSAGE; + SSLerr(SSL_F_DTLS1_READ_BYTES, ERR_R_INTERNAL_ERROR); + goto f_err; + case SSL3_RT_APPLICATION_DATA: + /* + * At this point, we were expecting handshake data, but have + * application data. If the library was running inside ssl3_read() + * (i.e. in_read_app_data is set) and it makes sense to read + * application data at this point (session renegotiation not yet + * started), we will indulge it. + */ + if (s->s3->in_read_app_data && + (s->s3->total_renegotiations != 0) && + (((s->state & SSL_ST_CONNECT) && + (s->state >= SSL3_ST_CW_CLNT_HELLO_A) && + (s->state <= SSL3_ST_CR_SRVR_HELLO_A) + ) || ((s->state & SSL_ST_ACCEPT) && + (s->state <= SSL3_ST_SW_HELLO_REQ_A) && + (s->state >= SSL3_ST_SR_CLNT_HELLO_A) + ) + )) { + s->s3->in_read_app_data = 2; + return (-1); + } else { + al = SSL_AD_UNEXPECTED_MESSAGE; + SSLerr(SSL_F_DTLS1_READ_BYTES, SSL_R_UNEXPECTED_RECORD); + goto f_err; + } + } + /* not reached */ + + f_err: + ssl3_send_alert(s, SSL3_AL_FATAL, al); + err: + return (-1); +} + +int dtls1_write_app_data_bytes(SSL *s, int type, const void *buf_, int len) +{ + int i; + +#ifndef OPENSSL_NO_SCTP + /* + * Check if we have to continue an interrupted handshake for reading + * belated app data with SCTP. + */ + if ((SSL_in_init(s) && !s->in_handshake) || + (BIO_dgram_is_sctp(SSL_get_wbio(s)) && + (s->state == DTLS1_SCTP_ST_SR_READ_SOCK + || s->state == DTLS1_SCTP_ST_CR_READ_SOCK))) +#else + if (SSL_in_init(s) && !s->in_handshake) +#endif + { + i = s->handshake_func(s); + if (i < 0) + return (i); + if (i == 0) { + SSLerr(SSL_F_DTLS1_WRITE_APP_DATA_BYTES, + SSL_R_SSL_HANDSHAKE_FAILURE); + return -1; + } + } + + if (len > SSL3_RT_MAX_PLAIN_LENGTH) { + SSLerr(SSL_F_DTLS1_WRITE_APP_DATA_BYTES, SSL_R_DTLS_MESSAGE_TOO_BIG); + return -1; + } + + i = dtls1_write_bytes(s, type, buf_, len); + return i; +} + + /* + * this only happens when a client hello is received and a handshake + * is started. + */ static int -have_handshake_fragment(SSL *s, int type, unsigned char *buf, - int len, int peek) - { - - if ((type == SSL3_RT_HANDSHAKE) && (s->d1->handshake_fragment_len > 0)) - /* (partially) satisfy request from storage */ - { - unsigned char *src = s->d1->handshake_fragment; - unsigned char *dst = buf; - unsigned int k,n; - - /* peek == 0 */ - n = 0; - while ((len > 0) && (s->d1->handshake_fragment_len > 0)) - { - *dst++ = *src++; - len--; s->d1->handshake_fragment_len--; - n++; - } - /* move any remaining fragment bytes: */ - for (k = 0; k < s->d1->handshake_fragment_len; k++) - s->d1->handshake_fragment[k] = *src++; - return n; - } - - return 0; - } - - - - -/* Call this to write data in records of type 'type' - * It will return <= 0 if not all data has been sent or non-blocking IO. +have_handshake_fragment(SSL *s, int type, unsigned char *buf, + int len, int peek) +{ + + if ((type == SSL3_RT_HANDSHAKE) && (s->d1->handshake_fragment_len > 0)) + /* (partially) satisfy request from storage */ + { + unsigned char *src = s->d1->handshake_fragment; + unsigned char *dst = buf; + unsigned int k, n; + + /* peek == 0 */ + n = 0; + while ((len > 0) && (s->d1->handshake_fragment_len > 0)) { + *dst++ = *src++; + len--; + s->d1->handshake_fragment_len--; + n++; + } + /* move any remaining fragment bytes: */ + for (k = 0; k < s->d1->handshake_fragment_len; k++) + s->d1->handshake_fragment[k] = *src++; + return n; + } + + return 0; +} + +/* + * Call this to write data in records of type 'type' It will return <= 0 if + * not all data has been sent or non-blocking IO. */ -int dtls1_write_bytes(SSL *s, int type, const void *buf_, int len) - { - const unsigned char *buf=buf_; - unsigned int tot,n,nw; - int i; - unsigned int mtu; +int dtls1_write_bytes(SSL *s, int type, const void *buf, int len) +{ + int i; + + OPENSSL_assert(len <= SSL3_RT_MAX_PLAIN_LENGTH); + s->rwstate = SSL_NOTHING; + i = do_dtls1_write(s, type, buf, len, 0); + return i; +} - s->rwstate=SSL_NOTHING; - tot=s->s3->wnum; +int do_dtls1_write(SSL *s, int type, const unsigned char *buf, + unsigned int len, int create_empty_fragment) +{ + unsigned char *p, *pseq; + int i, mac_size, clear = 0; + int prefix_len = 0; + int eivlen; + SSL3_RECORD *wr; + SSL3_BUFFER *wb; + SSL_SESSION *sess; + + /* + * first check if there is a SSL3_BUFFER still being written out. This + * will happen with non blocking IO + */ + if (s->s3->wbuf.left != 0) { + OPENSSL_assert(0); /* XDTLS: want to see if we ever get here */ + return (ssl3_write_pending(s, type, buf, len)); + } + + /* If we have an alert to send, lets send it */ + if (s->s3->alert_dispatch) { + i = s->method->ssl_dispatch_alert(s); + if (i <= 0) + return (i); + /* if it went, fall through and send more stuff */ + } - n=(len-tot); + if (len == 0 && !create_empty_fragment) + return 0; - /* handshake layer figures out MTU for itself, but data records - * are also sent through this interface, so need to figure out MTU */ -#if 0 - mtu = BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_GET_MTU, 0, NULL); - mtu += DTLS1_HM_HEADER_LENGTH; /* HM already inserted */ -#endif - mtu = s->d1->mtu; - - if (mtu > SSL3_RT_MAX_PLAIN_LENGTH) - mtu = SSL3_RT_MAX_PLAIN_LENGTH; - - if (n > mtu) - nw=mtu; - else - nw=n; - - i=do_dtls1_write(s, type, &(buf[tot]), nw, 0); - if (i <= 0) - { - s->s3->wnum=tot; - return i; - } - - if ( (int)s->s3->wnum + i == len) - s->s3->wnum = 0; - else - s->s3->wnum += i; - - return tot + i; - } - -int do_dtls1_write(SSL *s, int type, const unsigned char *buf, unsigned int len, int create_empty_fragment) - { - unsigned char *p,*pseq; - int i,mac_size,clear=0; - int prefix_len = 0; - SSL3_RECORD *wr; - SSL3_BUFFER *wb; - SSL_SESSION *sess; - int bs; - - /* first check if there is a SSL3_BUFFER still being written - * out. This will happen with non blocking IO */ - if (s->s3->wbuf.left != 0) - { - OPENSSL_assert(0); /* XDTLS: want to see if we ever get here */ - return(ssl3_write_pending(s,type,buf,len)); - } - - /* If we have an alert to send, lets send it */ - if (s->s3->alert_dispatch) - { - i=s->method->ssl_dispatch_alert(s); - if (i <= 0) - return(i); - /* if it went, fall through and send more stuff */ - } - - if (len == 0 && !create_empty_fragment) - return 0; - - wr= &(s->s3->wrec); - wb= &(s->s3->wbuf); - sess=s->session; - - if ( (sess == NULL) || - (s->enc_write_ctx == NULL) || - (EVP_MD_CTX_md(s->write_hash) == NULL)) - clear=1; - - if (clear) - mac_size=0; - else - mac_size=EVP_MD_CTX_size(s->write_hash); - - /* DTLS implements explicit IV, so no need for empty fragments */ + wr = &(s->s3->wrec); + wb = &(s->s3->wbuf); + sess = s->session; + + if ((sess == NULL) || + (s->enc_write_ctx == NULL) || (EVP_MD_CTX_md(s->write_hash) == NULL)) + clear = 1; + + if (clear) + mac_size = 0; + else { + mac_size = EVP_MD_CTX_size(s->write_hash); + if (mac_size < 0) + goto err; + } + + /* DTLS implements explicit IV, so no need for empty fragments */ #if 0 - /* 'create_empty_fragment' is true only when this function calls itself */ - if (!clear && !create_empty_fragment && !s->s3->empty_fragment_done - && SSL_version(s) != DTLS1_VERSION) - { - /* countermeasure against known-IV weakness in CBC ciphersuites - * (see http://www.openssl.org/~bodo/tls-cbc.txt) - */ - - if (s->s3->need_empty_fragments && type == SSL3_RT_APPLICATION_DATA) - { - /* recursive function call with 'create_empty_fragment' set; - * this prepares and buffers the data for an empty fragment - * (these 'prefix_len' bytes are sent out later - * together with the actual payload) */ - prefix_len = s->method->do_ssl_write(s, type, buf, 0, 1); - if (prefix_len <= 0) - goto err; - - if (s->s3->wbuf.len < (size_t)prefix_len + SSL3_RT_MAX_PACKET_SIZE) - { - /* insufficient space */ - SSLerr(SSL_F_DO_DTLS1_WRITE, ERR_R_INTERNAL_ERROR); - goto err; - } - } - - s->s3->empty_fragment_done = 1; - } -#endif + /* + * 'create_empty_fragment' is true only when this function calls itself + */ + if (!clear && !create_empty_fragment && !s->s3->empty_fragment_done + && SSL_version(s) != DTLS1_VERSION && SSL_version(s) != DTLS1_BAD_VER) + { + /* + * countermeasure against known-IV weakness in CBC ciphersuites (see + * http://www.openssl.org/~bodo/tls-cbc.txt) + */ + + if (s->s3->need_empty_fragments && type == SSL3_RT_APPLICATION_DATA) { + /* + * recursive function call with 'create_empty_fragment' set; this + * prepares and buffers the data for an empty fragment (these + * 'prefix_len' bytes are sent out later together with the actual + * payload) + */ + prefix_len = s->method->do_ssl_write(s, type, buf, 0, 1); + if (prefix_len <= 0) + goto err; + + if (s->s3->wbuf.len < + (size_t)prefix_len + SSL3_RT_MAX_PACKET_SIZE) { + /* insufficient space */ + SSLerr(SSL_F_DO_DTLS1_WRITE, ERR_R_INTERNAL_ERROR); + goto err; + } + } - p = wb->buf + prefix_len; - - /* write the header */ - - *(p++)=type&0xff; - wr->type=type; - - *(p++)=(s->version>>8); - *(p++)=s->version&0xff; - - /* field where we are to write out packet epoch, seq num and len */ - pseq=p; - p+=10; - - /* lets setup the record stuff. */ - - /* Make space for the explicit IV in case of CBC. - * (this is a bit of a boundary violation, but what the heck). - */ - if ( s->enc_write_ctx && - (EVP_CIPHER_mode( s->enc_write_ctx->cipher ) & EVP_CIPH_CBC_MODE)) - bs = EVP_CIPHER_block_size(s->enc_write_ctx->cipher); - else - bs = 0; - - wr->data=p + bs; /* make room for IV in case of CBC */ - wr->length=(int)len; - wr->input=(unsigned char *)buf; - - /* we now 'read' from wr->input, wr->length bytes into - * wr->data */ - - /* first we compress */ - if (s->compress != NULL) - { - if (!ssl3_do_compress(s)) - { - SSLerr(SSL_F_DO_DTLS1_WRITE,SSL_R_COMPRESSION_FAILURE); - goto err; - } - } - else - { - memcpy(wr->data,wr->input,wr->length); - wr->input=wr->data; - } - - /* we should still have the output to wr->data and the input - * from wr->input. Length should be wr->length. - * wr->data still points in the wb->buf */ - - if (mac_size != 0) - { - s->method->ssl3_enc->mac(s,&(p[wr->length + bs]),1); - wr->length+=mac_size; - } - - /* this is true regardless of mac size */ - wr->input=p; - wr->data=p; - - - /* ssl3_enc can only have an error on read */ - wr->length += bs; /* bs != 0 in case of CBC. The enc fn provides - * the randomness */ - s->method->ssl3_enc->enc(s,1); - - /* record length after mac and block padding */ -/* if (type == SSL3_RT_APPLICATION_DATA || - (type == SSL3_RT_ALERT && ! SSL_in_init(s))) */ - - /* there's only one epoch between handshake and app data */ - - s2n(s->d1->w_epoch, pseq); - - /* XDTLS: ?? */ -/* else - s2n(s->d1->handshake_epoch, pseq); */ - - memcpy(pseq, &(s->s3->write_sequence[2]), 6); - pseq+=6; - s2n(wr->length,pseq); - - /* we should now have - * wr->data pointing to the encrypted data, which is - * wr->length long */ - wr->type=type; /* not needed but helps for debugging */ - wr->length+=DTLS1_RT_HEADER_LENGTH; - -#if 0 /* this is now done at the message layer */ - /* buffer the record, making it easy to handle retransmits */ - if ( type == SSL3_RT_HANDSHAKE || type == SSL3_RT_CHANGE_CIPHER_SPEC) - dtls1_buffer_record(s, wr->data, wr->length, - *((PQ_64BIT *)&(s->s3->write_sequence[0]))); + s->s3->empty_fragment_done = 1; + } #endif + p = wb->buf + prefix_len; + + /* write the header */ + + *(p++) = type & 0xff; + wr->type = type; + /* + * Special case: for hello verify request, client version 1.0 and we + * haven't decided which version to use yet send back using version 1.0 + * header: otherwise some clients will ignore it. + */ + if (s->method->version == DTLS_ANY_VERSION) { + *(p++) = DTLS1_VERSION >> 8; + *(p++) = DTLS1_VERSION & 0xff; + } else { + *(p++) = s->version >> 8; + *(p++) = s->version & 0xff; + } - ssl3_record_sequence_update(&(s->s3->write_sequence[0])); + /* field where we are to write out packet epoch, seq num and len */ + pseq = p; + p += 10; + + /* Explicit IV length, block ciphers appropriate version flag */ + if (s->enc_write_ctx) { + int mode = EVP_CIPHER_CTX_mode(s->enc_write_ctx); + if (mode == EVP_CIPH_CBC_MODE) { + eivlen = EVP_CIPHER_CTX_iv_length(s->enc_write_ctx); + if (eivlen <= 1) + eivlen = 0; + } + /* Need explicit part of IV for GCM mode */ + else if (mode == EVP_CIPH_GCM_MODE) + eivlen = EVP_GCM_TLS_EXPLICIT_IV_LEN; + else + eivlen = 0; + } else + eivlen = 0; + + /* lets setup the record stuff. */ + wr->data = p + eivlen; /* make room for IV in case of CBC */ + wr->length = (int)len; + wr->input = (unsigned char *)buf; + + /* + * we now 'read' from wr->input, wr->length bytes into wr->data + */ + + /* first we compress */ + if (s->compress != NULL) { + if (!ssl3_do_compress(s)) { + SSLerr(SSL_F_DO_DTLS1_WRITE, SSL_R_COMPRESSION_FAILURE); + goto err; + } + } else { + memcpy(wr->data, wr->input, wr->length); + wr->input = wr->data; + } - if (create_empty_fragment) - { - /* we are in a recursive call; - * just return the length, don't write out anything here - */ - return wr->length; - } + /* + * we should still have the output to wr->data and the input from + * wr->input. Length should be wr->length. wr->data still points in the + * wb->buf + */ - /* now let's set up wb */ - wb->left = prefix_len + wr->length; - wb->offset = 0; + if (mac_size != 0) { + if (s->method->ssl3_enc->mac(s, &(p[wr->length + eivlen]), 1) < 0) + goto err; + wr->length += mac_size; + } - /* memorize arguments so that ssl3_write_pending can detect bad write retries later */ - s->s3->wpend_tot=len; - s->s3->wpend_buf=buf; - s->s3->wpend_type=type; - s->s3->wpend_ret=len; + /* this is true regardless of mac size */ + wr->input = p; + wr->data = p; - /* we now just need to write the buffer */ - return ssl3_write_pending(s,type,buf,len); -err: - return -1; - } + if (eivlen) + wr->length += eivlen; + if (s->method->ssl3_enc->enc(s, 1) < 1) + goto err; + /* record length after mac and block padding */ + /* + * if (type == SSL3_RT_APPLICATION_DATA || (type == SSL3_RT_ALERT && ! + * SSL_in_init(s))) + */ -static int dtls1_record_replay_check(SSL *s, DTLS1_BITMAP *bitmap) - { - int cmp; - unsigned int shift; - const unsigned char *seq = s->s3->read_sequence; - - cmp = satsub64be(seq,bitmap->max_seq_num); - if (cmp > 0) - { - memcpy (s->s3->rrec.seq_num,seq,8); - return 1; /* this record in new */ - } - shift = -cmp; - if (shift >= sizeof(bitmap->map)*8) - return 0; /* stale, outside the window */ - else if (bitmap->map & (1UL<s3->rrec.seq_num,seq,8); - return 1; - } + /* there's only one epoch between handshake and app data */ + s2n(s->d1->w_epoch, pseq); -static void dtls1_record_bitmap_update(SSL *s, DTLS1_BITMAP *bitmap) - { - int cmp; - unsigned int shift; - const unsigned char *seq = s->s3->read_sequence; - - cmp = satsub64be(seq,bitmap->max_seq_num); - if (cmp > 0) - { - shift = cmp; - if (shift < sizeof(bitmap->map)*8) - bitmap->map <<= shift, bitmap->map |= 1UL; - else - bitmap->map = 1UL; - memcpy(bitmap->max_seq_num,seq,8); - } - else { - shift = -cmp; - if (shift < sizeof(bitmap->map)*8) - bitmap->map |= 1UL<d1->handshake_epoch, pseq); + */ + memcpy(pseq, &(s->s3->write_sequence[2]), 6); + pseq += 6; + s2n(wr->length, pseq); -int dtls1_dispatch_alert(SSL *s) - { - int i,j; - void (*cb)(const SSL *ssl,int type,int val)=NULL; - unsigned char buf[2 + 2 + 3]; /* alert level + alert desc + message seq +frag_off */ - unsigned char *ptr = &buf[0]; + if (s->msg_callback) + s->msg_callback(1, 0, SSL3_RT_HEADER, pseq - DTLS1_RT_HEADER_LENGTH, + DTLS1_RT_HEADER_LENGTH, s, s->msg_callback_arg); - s->s3->alert_dispatch=0; + /* + * we should now have wr->data pointing to the encrypted data, which is + * wr->length long + */ + wr->type = type; /* not needed but helps for debugging */ + wr->length += DTLS1_RT_HEADER_LENGTH; - memset(buf, 0x00, sizeof(buf)); - *ptr++ = s->s3->send_alert[0]; - *ptr++ = s->s3->send_alert[1]; +#if 0 /* this is now done at the message layer */ + /* buffer the record, making it easy to handle retransmits */ + if (type == SSL3_RT_HANDSHAKE || type == SSL3_RT_CHANGE_CIPHER_SPEC) + dtls1_buffer_record(s, wr->data, wr->length, + *((PQ_64BIT *) & (s->s3->write_sequence[0]))); +#endif -#ifdef DTLS1_AD_MISSING_HANDSHAKE_MESSAGE - if (s->s3->send_alert[1] == DTLS1_AD_MISSING_HANDSHAKE_MESSAGE) - { - s2n(s->d1->handshake_read_seq, ptr); -#if 0 - if ( s->d1->r_msg_hdr.frag_off == 0) /* waiting for a new msg */ + ssl3_record_sequence_update(&(s->s3->write_sequence[0])); - else - s2n(s->d1->r_msg_hdr.seq, ptr); /* partial msg read */ -#endif + if (create_empty_fragment) { + /* + * we are in a recursive call; just return the length, don't write + * out anything here + */ + return wr->length; + } -#if 0 - fprintf(stderr, "s->d1->handshake_read_seq = %d, s->d1->r_msg_hdr.seq = %d\n",s->d1->handshake_read_seq,s->d1->r_msg_hdr.seq); -#endif - l2n3(s->d1->r_msg_hdr.frag_off, ptr); - } + /* now let's set up wb */ + wb->left = prefix_len + wr->length; + wb->offset = 0; + + /* + * memorize arguments so that ssl3_write_pending can detect bad write + * retries later + */ + s->s3->wpend_tot = len; + s->s3->wpend_buf = buf; + s->s3->wpend_type = type; + s->s3->wpend_ret = len; + + /* we now just need to write the buffer */ + return ssl3_write_pending(s, type, buf, len); + err: + return -1; +} + +static int dtls1_record_replay_check(SSL *s, DTLS1_BITMAP *bitmap) +{ + int cmp; + unsigned int shift; + const unsigned char *seq = s->s3->read_sequence; + + cmp = satsub64be(seq, bitmap->max_seq_num); + if (cmp > 0) { + memcpy(s->s3->rrec.seq_num, seq, 8); + return 1; /* this record in new */ + } + shift = -cmp; + if (shift >= sizeof(bitmap->map) * 8) + return 0; /* stale, outside the window */ + else if (bitmap->map & (1UL << shift)) + return 0; /* record previously received */ + + memcpy(s->s3->rrec.seq_num, seq, 8); + return 1; +} + +static void dtls1_record_bitmap_update(SSL *s, DTLS1_BITMAP *bitmap) +{ + int cmp; + unsigned int shift; + const unsigned char *seq = s->s3->read_sequence; + + cmp = satsub64be(seq, bitmap->max_seq_num); + if (cmp > 0) { + shift = cmp; + if (shift < sizeof(bitmap->map) * 8) + bitmap->map <<= shift, bitmap->map |= 1UL; + else + bitmap->map = 1UL; + memcpy(bitmap->max_seq_num, seq, 8); + } else { + shift = -cmp; + if (shift < sizeof(bitmap->map) * 8) + bitmap->map |= 1UL << shift; + } +} + +int dtls1_dispatch_alert(SSL *s) +{ + int i, j; + void (*cb) (const SSL *ssl, int type, int val) = NULL; + unsigned char buf[DTLS1_AL_HEADER_LENGTH]; + unsigned char *ptr = &buf[0]; + + s->s3->alert_dispatch = 0; + + memset(buf, 0x00, sizeof(buf)); + *ptr++ = s->s3->send_alert[0]; + *ptr++ = s->s3->send_alert[1]; + +#ifdef DTLS1_AD_MISSING_HANDSHAKE_MESSAGE + if (s->s3->send_alert[1] == DTLS1_AD_MISSING_HANDSHAKE_MESSAGE) { + s2n(s->d1->handshake_read_seq, ptr); +# if 0 + if (s->d1->r_msg_hdr.frag_off == 0) + /* + * waiting for a new msg + */ + else + s2n(s->d1->r_msg_hdr.seq, ptr); /* partial msg read */ +# endif + +# if 0 + fprintf(stderr, + "s->d1->handshake_read_seq = %d, s->d1->r_msg_hdr.seq = %d\n", + s->d1->handshake_read_seq, s->d1->r_msg_hdr.seq); +# endif + l2n3(s->d1->r_msg_hdr.frag_off, ptr); + } #endif - i = do_dtls1_write(s, SSL3_RT_ALERT, &buf[0], sizeof(buf), 0); - if (i <= 0) - { - s->s3->alert_dispatch=1; - /* fprintf( stderr, "not done with alert\n" ); */ - } - else - { - if (s->s3->send_alert[0] == SSL3_AL_FATAL + i = do_dtls1_write(s, SSL3_RT_ALERT, &buf[0], sizeof(buf), 0); + if (i <= 0) { + s->s3->alert_dispatch = 1; + /* fprintf( stderr, "not done with alert\n" ); */ + } else { + if (s->s3->send_alert[0] == SSL3_AL_FATAL #ifdef DTLS1_AD_MISSING_HANDSHAKE_MESSAGE - || s->s3->send_alert[1] == DTLS1_AD_MISSING_HANDSHAKE_MESSAGE + || s->s3->send_alert[1] == DTLS1_AD_MISSING_HANDSHAKE_MESSAGE #endif - ) - (void)BIO_flush(s->wbio); - - if (s->msg_callback) - s->msg_callback(1, s->version, SSL3_RT_ALERT, s->s3->send_alert, - 2, s, s->msg_callback_arg); - - if (s->info_callback != NULL) - cb=s->info_callback; - else if (s->ctx->info_callback != NULL) - cb=s->ctx->info_callback; - - if (cb != NULL) - { - j=(s->s3->send_alert[0]<<8)|s->s3->send_alert[1]; - cb(s,SSL_CB_WRITE_ALERT,j); - } - } - return(i); - } - - -static DTLS1_BITMAP * -dtls1_get_bitmap(SSL *s, SSL3_RECORD *rr, unsigned int *is_next_epoch) - { - + ) + (void)BIO_flush(s->wbio); + + if (s->msg_callback) + s->msg_callback(1, s->version, SSL3_RT_ALERT, s->s3->send_alert, + 2, s, s->msg_callback_arg); + + if (s->info_callback != NULL) + cb = s->info_callback; + else if (s->ctx->info_callback != NULL) + cb = s->ctx->info_callback; + + if (cb != NULL) { + j = (s->s3->send_alert[0] << 8) | s->s3->send_alert[1]; + cb(s, SSL_CB_WRITE_ALERT, j); + } + } + return (i); +} + +static DTLS1_BITMAP *dtls1_get_bitmap(SSL *s, SSL3_RECORD *rr, + unsigned int *is_next_epoch) +{ + *is_next_epoch = 0; /* In current epoch, accept HM, CCS, DATA, & ALERT */ if (rr->epoch == s->d1->r_epoch) return &s->d1->bitmap; - /* Only HM and ALERT messages can be from the next epoch */ + /* + * Only HM and ALERT messages can be from the next epoch and only if we + * have already processed all of the unprocessed records from the last + * epoch + */ else if (rr->epoch == (unsigned long)(s->d1->r_epoch + 1) && - (rr->type == SSL3_RT_HANDSHAKE || - rr->type == SSL3_RT_ALERT)) - { + s->d1->unprocessed_rcds.epoch != s->d1->r_epoch && + (rr->type == SSL3_RT_HANDSHAKE || rr->type == SSL3_RT_ALERT)) { *is_next_epoch = 1; return &s->d1->next_bitmap; - } + } return NULL; - } +} #if 0 static int -dtls1_record_needs_buffering(SSL *s, SSL3_RECORD *rr, unsigned short *priority, - unsigned long *offset) - { - - /* alerts are passed up immediately */ - if ( rr->type == SSL3_RT_APPLICATION_DATA || - rr->type == SSL3_RT_ALERT) - return 0; - - /* Only need to buffer if a handshake is underway. - * (this implies that Hello Request and Client Hello are passed up - * immediately) */ - if ( SSL_in_init(s)) - { - unsigned char *data = rr->data; - /* need to extract the HM/CCS sequence number here */ - if ( rr->type == SSL3_RT_HANDSHAKE || - rr->type == SSL3_RT_CHANGE_CIPHER_SPEC) - { - unsigned short seq_num; - struct hm_header_st msg_hdr; - struct ccs_header_st ccs_hdr; - - if ( rr->type == SSL3_RT_HANDSHAKE) - { - dtls1_get_message_header(data, &msg_hdr); - seq_num = msg_hdr.seq; - *offset = msg_hdr.frag_off; - } - else - { - dtls1_get_ccs_header(data, &ccs_hdr); - seq_num = ccs_hdr.seq; - *offset = 0; - } - - /* this is either a record we're waiting for, or a - * retransmit of something we happened to previously - * receive (higher layers will drop the repeat silently */ - if ( seq_num < s->d1->handshake_read_seq) - return 0; - if (rr->type == SSL3_RT_HANDSHAKE && - seq_num == s->d1->handshake_read_seq && - msg_hdr.frag_off < s->d1->r_msg_hdr.frag_off) - return 0; - else if ( seq_num == s->d1->handshake_read_seq && - (rr->type == SSL3_RT_CHANGE_CIPHER_SPEC || - msg_hdr.frag_off == s->d1->r_msg_hdr.frag_off)) - return 0; - else - { - *priority = seq_num; - return 1; - } - } - else /* unknown record type */ - return 0; - } - - return 0; - } +dtls1_record_needs_buffering(SSL *s, SSL3_RECORD *rr, + unsigned short *priority, unsigned long *offset) +{ + + /* alerts are passed up immediately */ + if (rr->type == SSL3_RT_APPLICATION_DATA || rr->type == SSL3_RT_ALERT) + return 0; + + /* + * Only need to buffer if a handshake is underway. (this implies that + * Hello Request and Client Hello are passed up immediately) + */ + if (SSL_in_init(s)) { + unsigned char *data = rr->data; + /* need to extract the HM/CCS sequence number here */ + if (rr->type == SSL3_RT_HANDSHAKE || + rr->type == SSL3_RT_CHANGE_CIPHER_SPEC) { + unsigned short seq_num; + struct hm_header_st msg_hdr; + struct ccs_header_st ccs_hdr; + + if (rr->type == SSL3_RT_HANDSHAKE) { + dtls1_get_message_header(data, &msg_hdr); + seq_num = msg_hdr.seq; + *offset = msg_hdr.frag_off; + } else { + dtls1_get_ccs_header(data, &ccs_hdr); + seq_num = ccs_hdr.seq; + *offset = 0; + } + + /* + * this is either a record we're waiting for, or a retransmit of + * something we happened to previously receive (higher layers + * will drop the repeat silently + */ + if (seq_num < s->d1->handshake_read_seq) + return 0; + if (rr->type == SSL3_RT_HANDSHAKE && + seq_num == s->d1->handshake_read_seq && + msg_hdr.frag_off < s->d1->r_msg_hdr.frag_off) + return 0; + else if (seq_num == s->d1->handshake_read_seq && + (rr->type == SSL3_RT_CHANGE_CIPHER_SPEC || + msg_hdr.frag_off == s->d1->r_msg_hdr.frag_off)) + return 0; + else { + *priority = seq_num; + return 1; + } + } else /* unknown record type */ + return 0; + } + + return 0; +} #endif -void -dtls1_reset_seq_numbers(SSL *s, int rw) - { - unsigned char *seq; - unsigned int seq_bytes = sizeof(s->s3->read_sequence); - - if ( rw & SSL3_CC_READ) - { - seq = s->s3->read_sequence; - s->d1->r_epoch++; - memcpy(&(s->d1->bitmap), &(s->d1->next_bitmap), sizeof(DTLS1_BITMAP)); - memset(&(s->d1->next_bitmap), 0x00, sizeof(DTLS1_BITMAP)); - } - else - { - seq = s->s3->write_sequence; - s->d1->w_epoch++; - } - - memset(seq, 0x00, seq_bytes); - } - - -static void -dtls1_clear_timeouts(SSL *s) - { - memset(&(s->d1->timeout), 0x00, sizeof(struct dtls1_timeout_st)); - } +void dtls1_reset_seq_numbers(SSL *s, int rw) +{ + unsigned char *seq; + unsigned int seq_bytes = sizeof(s->s3->read_sequence); + + if (rw & SSL3_CC_READ) { + seq = s->s3->read_sequence; + s->d1->r_epoch++; + memcpy(&(s->d1->bitmap), &(s->d1->next_bitmap), sizeof(DTLS1_BITMAP)); + memset(&(s->d1->next_bitmap), 0x00, sizeof(DTLS1_BITMAP)); + + /* + * We must not use any buffered messages received from the previous + * epoch + */ + dtls1_clear_received_buffer(s); + } else { + seq = s->s3->write_sequence; + memcpy(s->d1->last_write_sequence, seq, + sizeof(s->s3->write_sequence)); + s->d1->w_epoch++; + } + + memset(seq, 0x00, seq_bytes); +}