X-Git-Url: https://git.openssl.org/gitweb/?p=openssl.git;a=blobdiff_plain;f=config;h=00e4c76919712849aa3679152c48eb070bed1a5d;hp=21202f3824085599b58d7f9dd75710a860d41b9f;hb=04cc76660a46575c568125c997d0f3c73d4ec711;hpb=bb4f7a8d527c41238d5120c211b2ac38ecb90609

diff --git a/config b/config
index 21202f3824..00e4c76919 100755
--- a/config
+++ b/config
@@ -246,10 +246,13 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	;;
 
     QNX:*)
-	case "$VERSION" in
+	case "$RELEASE" in
 	    4*)
 		echo "${MACHINE}-whatever-qnx4"
 		;;
+	    6*)
+		echo "${MACHINE}-whatever-qnx6"
+		;;
 	    *)
 		echo "${MACHINE}-whatever-qnx"
 		;;
@@ -329,6 +332,25 @@ case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
 	echo "mips-sony-newsos4"; exit 0;
 	;;
 
+    CYGWIN*)
+	case "$RELEASE" in
+	    [bB]*|1.0|1.[12].*)
+		echo "${MACHINE}-whatever-cygwin_pre1.3"
+		;;
+	    *)
+		echo "${MACHINE}-whatever-cygwin"
+		;;
+	esac
+	exit 0
+	;;
+
+    *"CRAY T3E")
+       echo "t3e-cray-unicosmk"; exit 0;
+       ;;
+
+    *CRAY*)
+       echo "j90-cray-unicos"; exit 0;
+       ;;
 esac
 
 #
@@ -368,11 +390,13 @@ exit 0
 
 # figure out if gcc is available and if so we use it otherwise
 # we fallback to whatever cc does on the system
-GCCVER=`(gcc --version) 2>/dev/null`
+GCCVER=`(gcc --version) 2>/dev/null | head -1`
 if [ "$GCCVER" != "" ]; then
   CC=gcc
-  # then strip off whatever prefix Cygnus prepends the number with...
-  GCCVER=`echo $GCCVER | sed 's/^[a-z]*\-//'`
+  # then strip off whatever prefix Cygnus as well as GCC 3.1 prepends
+  # the number with...  Hopefully, this will work for any future prefixes
+  # as well.
+  GCCVER=`echo $GCCVER | sed 's/^[a-zA-Z ()]*\-//'`
   # peak single digit before and after first dot, e.g. 2.95.1 gives 29
   GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
 else
@@ -495,6 +519,10 @@ EOF
 	${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}`
 	rm dummy dummy.c
 	;;
+  ppc64-*-linux2)
+	#Use the standard target for PPC architecture until we create a
+	#special one for the 64bit architecture.
+	OUT="linux-ppc" ;;
   ppc-*-linux2) OUT="linux-ppc" ;;
   m68k-*-linux*) OUT="linux-m68k" ;;
   ia64-*-linux?) OUT="linux-ia64" ;;
@@ -517,8 +545,29 @@ EOF
 	sun4d)	OUT="linux-sparcv8" ;;
 	*)	OUT="linux-sparcv7" ;;
 	esac ;;
+  parisc-*-linux2)
+        CPUARCH=`awk '/cpu family/{print substr($5,1,3)}' /proc/cpuinfo`
+	CPUSCHEDULE=`awk '/^cpu.[ 	]: PA/{print substr($3,3)}' /proc/cpuinfo`
+
+	# ??TODO ??  Model transformations
+	# 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
+	#    assuming no further arch. identification will ever be used by GCC.
+	# 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
+	# 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
+	#    for these chips in the future.
+	#         PA7300LC -> 7100LC (1.1)
+	#         PA8200   -> 8000   (2.0)
+	#         PA8500   -> 8000   (2.0)
+	#         PA8600   -> 8000   (2.0)
+
+	CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8?00/8000/'`
+	# Finish Model transformations
+
+	options="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH"
+	OUT="linux-parisc" ;;
   arm*-*-linux2) OUT="linux-elf-arm" ;;
   s390-*-linux2) OUT="linux-s390" ;;
+  s390x-*-linux?) OUT="linux-s390x" ;;
   *-*-linux2) OUT="linux-elf"
 	if [ "$GCCVER" -gt 28 ]; then
           if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
@@ -577,14 +626,28 @@ EOF
   *86*-*-netbsd) OUT="NetBSD-x86" ;;
   sun3*-*-netbsd) OUT="NetBSD-m68" ;;
   *-*-netbsd) OUT="NetBSD-sparc" ;;
-  *86*-*-openbsd) OUT="OpenBSD-x86" ;;
   alpha*-*-openbsd) OUT="OpenBSD-alpha" ;;
+  *86*-*-openbsd) OUT="OpenBSD-i386" ;;
+  m68k*-*-openbsd) OUT="OpenBSD-m68k" ;;
+  m88k*-*-openbsd) OUT="OpenBSD-m88k" ;;
+  mips*-*-openbsd) OUT="OpenBSD-mips" ;;
   pmax*-*-openbsd) OUT="OpenBSD-mips" ;;
+  powerpc*-*-openbsd) OUT="OpenBSD-powerpc" ;;
+  sparc64*-*-openbsd) OUT="OpenBSD-sparc64" ;;
+  sparc*-*-openbsd) OUT="OpenBSD-sparc" ;;
+  vax*-*-openbsd) OUT="OpenBSD-vax" ;;
+  hppa*-*-openbsd) OUT="OpenBSD-hppa" ;;
   *-*-openbsd) OUT="OpenBSD" ;;
   *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;;
   *-*-osf) OUT="alphaold-cc" ;;
   *-*-tru64) OUT="alpha-cc" ;;
-  *-*-OpenUNIX8*) OUT="OpenUNIX-8" ;;
+  *-*-OpenUNIX*)
+	if [ "$CC" = "gcc" ]; then
+	  OUT="OpenUNIX-8-gcc" 
+	else    
+	  OUT="OpenUNIX-8" 
+	fi
+	;;
   *-*-unixware7) OUT="unixware-7" ;;
   *-*-UnixWare7) OUT="unixware-7" ;;
   *-*-Unixware7) OUT="unixware-7" ;;
@@ -636,6 +699,10 @@ EOF
   # *-aix) OUT="aix-$CC" ;;
   # *-dgux) OUT="dgux" ;;
   mips-sony-newsos4) OUT="newsos4-gcc" ;;
+  *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
+  *-*-cygwin) OUT="Cygwin" ;;
+  t3e-cray-unicosmk) OUT="cray-t3e" ;;
+  j90-cray-unicos) OUT="cray-j90" ;;
   *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
 esac
 
@@ -670,7 +737,7 @@ case "$GUESSOS" in
   i386-*) options="$options 386" ;;
 esac
 
-for i in bf cast des dh dsa ec hmac md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa sha
+for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 rijndael ripemd rsa sha
 do
   if [ ! -d crypto/$i ]
   then