X-Git-Url: https://git.openssl.org/gitweb/?p=openssl.git;a=blobdiff_plain;f=INSTALL.VMS;h=0a25324033d0574c19ecb559d582e8ed21c6249c;hp=cf3c81a6efd79676580fa645a87482a137d97ab4;hb=02859fb74ac980303994dd46c28e0cd2211aba12;hpb=7d7d2cbcb02206f3393681f2bce198e11e2e185b

diff --git a/INSTALL.VMS b/INSTALL.VMS
index cf3c81a6ef..0a25324033 100644
--- a/INSTALL.VMS
+++ b/INSTALL.VMS
@@ -8,13 +8,44 @@ Intro:
 
 This file is divided in the following parts:
 
+  Checking the distribution	- Mandatory reading.
   Compilation			- Mandatory reading.
+  Logical names			- Mandatory reading.
   Test				- Mandatory reading.
   Installation			- Mandatory reading.
   Backward portability		- Read if it's an issue.
   Possible bugs or quirks	- A few warnings on things that
 				  may go wrong or may surprise you.
-  Report			- How to get in touch with me.
+  TODO				- Things that are to come.
+
+
+Checking the distribution:
+==========================
+
+There have been reports of places where the distribution didn't quite get
+through, for example if you've copied the tree from a NFS-mounted unix
+mount point.
+
+The easiest way to check if everything got through as it should is to check
+for oen of the following files:
+
+	[.CRYPTO]OPENSSLCONF.H_IN
+	[.CRYPTO]OPENSSLCONF_H.IN
+
+They should never exist both at once, but one of them should (preferably
+the first variant).  If you can't find any of those two, something went
+wrong.
+
+The best way to get a correct distribution is to download the gzipped tar
+file from ftp://ftp.openssl.org/source/, use GUNZIP to uncompress it and
+use VMSTAR to unpack the resulting tar file.
+
+GUNZIP is available in many places on the net.  One of the distribution
+points is the WKU software archive, ftp://ftp.wku.edu/vms/fileserv/ .
+
+VMSTAR is also available in many places on the net.  The recommended place
+to find information about it is http://www.free.lp.se/vmstar/ .
+
 
 Compilation:
 ============
@@ -35,26 +66,28 @@ directory.  The syntax is trhe following:
 <option> must be one of the following:
 
       ALL       Just build "everything".
-      DATE      Just build the "[.INCLUDE]DATE.H" file.
+      CONFIG    Just build the "[.CRYPTO]OPENSSLCONF.H" file.
+      BUILDINF  Just build the "[.INCLUDE]BUILDINF.H" file.
       SOFTLINKS Just copies some files, to simulate Unix soft links.
+      BUILDALL  Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done.
       RSAREF    Just build the "[.xxx.EXE.RSAREF]LIBRSAGLUE.OLB" library.
       CRYPTO    Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
       SSL       Just build the "[.xxx.EXE.SSL]LIBSSL.OLB" library.
       SSL_TASK  Just build the "[.xxx.EXE.SSL]SSL_TASK.EXE" program.
-      TEST      Just build the "test" programs for OpenSSL.
-      APPS      Just build the "application" programs for OpenSSL.
+      TEST      Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL.
+      APPS      Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
 
 <rsaref-p> must be one of the following:
 
       RSAREF    compile using the RSAREF Library
       NORSAREF  compile without using RSAREF
 
-Note: The RSAREF libraries are NOT INCLUDED and you have to
-      download it from "ftp://ftp.rsa.com/rsaref".  You have to
-      get the ".tar-Z" file as the ".zip" file dosen't have the
-      directory structure stored.  You have to extract the file
-      into the [.RSAREF] directory as that is where the scripts
-      will look for the files.
+Note 1: The RSAREF libraries are NOT INCLUDED and you have to
+        download it from "ftp://ftp.rsa.com/rsaref".  You have to
+        get the ".tar-Z" file as the ".zip" file doesn't have the
+        directory structure stored.  You have to extract the file
+        into the [.RSAREF] directory as that is where the scripts
+        will look for the files.
 
 Note 2: I have never done this, so I've no idea if it works or not.
 
@@ -65,7 +98,6 @@ Note 2: I have never done this, so I've no idea if it works or not.
 
 <compiler> must be one of the following:
 
-      VAXC      For VAX C.
       DECC      For DEC C.
       GNUC      For GNU C.
 
@@ -77,11 +109,33 @@ named LIBSSL.OLB, and you will find a bunch of useful programs in
 just to test them.  For production use, make sure you install first, see
 Installation below.
 
-Note: Some programs in this package require a TCP/IP library.
+Note 1: Some programs in this package require a TCP/IP library.
 
 Note 2: if you want to compile the crypto library only, please make sure
-        you have at least done a @MAKEVMS DATE and a @MAKEVMS SOFTLINKS.
-        A lot of things will break if you don't.
+        you have at least done a @MAKEVMS CONFIG, a @MAKEVMS BUILDINF and
+        a @MAKEVMS SOFTLINKS.  A lot of things will break if you don't.
+
+
+Logical names:
+==============
+
+There are a few things that can't currently be given through the command
+line.  Instead, logical names are used.
+
+Currently, the logical names supported are:
+
+      OPENSSL_NO_ASM    with value YES, the assembler parts of OpenSSL will
+                        not be used.  Instead, plain C implementations are
+                        used.  This is good to try if something doesn't work.
+      OPENSSL_NO_'alg'  with value YES, the corresponding crypto algorithm
+                        will not be implemented.  Supported algorithms to
+                        do this with are: RSA, DSA, DH, MD2, MD5, RIPEMD,
+                        SHA, DES, MDC2, CR2, RC4, RC5, IDEA, BF, CAST, HMAC,
+                        SSL2.  So, for example, having the logical name
+                        OPENSSL_NO_RSA with the value YES means that the
+                        LIBCRYPTO.OLB library will not contain an RSA
+                        implementation.
+
 
 Test:
 =====
@@ -95,6 +149,7 @@ it's an ugly hack!) and rebuild. Please send a bug report to
 <openssl-bugs@openssl.org>, including the output of "openssl version -a"
 and of the failed test.
 
+
 Installation:
 =============
 
@@ -106,6 +161,9 @@ Installation is easy, just do the following:
 subdirectories, libraries, header files, programs and startup command
 procedures.
 
+N.B.: INSTALL.COM builds a new directory structure, different from
+the directory tree where you have now build OpenSSL.
+
 In the [.VMS] subdirectory of the installation, you will find the
 following command procedures:
 
@@ -127,14 +185,29 @@ The logical names that are set up are the following:
 
   SSLROOT       a dotted concealed logical name pointing at the
                 root directory.
-  SSLLIB        points at the directory where CRYPTORTL.OLB and
-		SSLRTL.OLB are installed.
-  SSLINCLUDE    points at the directory where the header files are
-                installed.
-  SSLEXE        points at the directory where the applications are
-                installed.
-  SSLCERTS      the place where the certificates are stored.
-  SSLPRIVATE    I'm actually not sure what this is used for.
+
+  SSLCERTS      Initially an empty directory, this is the default
+		location for certificate files.
+  SSLMISC	Various scripts.
+  SSLPRIVATE	Initially an empty directory, this is the default
+		location for private key files.
+
+  SSLEXE        Contains the openssl binary and a few other utility
+		programs.
+  SSLINCLUDE    Contains the header files needed if you want to
+		compile programs with libcrypto or libssl.
+  SSLLIB        Contains the OpenSSL library files (LIBCRYPTO.OLB
+		and LIBSSL.OLB) themselves.
+
+  OPENSSL	Same as SSLINCLUDE.  This is because the standard
+		way to include OpenSSL header files from version
+		0.9.3 and on is:
+
+			#include <openssl/header.h>
+
+		For more info on this issue, see the INSTALL. file
+		(the NOTE in section 4 of "Installation in Detail").
+		You don't need to "deleting old header files"!!!
 
 
 Backward portability:
@@ -154,7 +227,7 @@ dependent on the OpenVMS version or the C library version, *and* you
 can use those macros to simulate older OpenVMS or C library versions,
 by defining the macros _VMS_V6_SOURCE, __VMS_VER and __CTRL_VER with
 correct values.  In the compilation scripts, I've provided the possibility
-for the user to influense the creation of such macros, through a bunch of
+for the user to influence the creation of such macros, through a bunch of
 symbols, all having names starting with USER_.  Here's the list of them:
 
   USER_CCFLAGS		 - Used to give additional qualifiers to the
@@ -191,14 +264,21 @@ directory by default, it may very well be that you have to give them
 extra arguments.  Please experiment.
 
 
-Report:
-=======
+TODO:
+=====
+
+There are a few things that need to be worked out in the VMS version of
+OpenSSL, still:
 
-I maintain a few mailinglists for bug reports and such on software that
-I develop/port/enhance/destroy.  Please look at http://www.free.lp.se/
-for further info.
+- Description files. ("Makefile's" :-))
+- Script code to link an already compiled build tree.
+- A VMSINSTALlable version (way in the future, unless someone else hacks).
+- shareable images (DLL for you Windows folks).
 
+There may be other things that I have missed and that may be desirable.
+Please send mail to <openssl-users@openssl.org> or to me directly if you
+have any ideas.
 
--- 
+--
 Richard Levitte <richard@levitte.org>
-1999-03-09
+2000-02-27