X-Git-Url: https://git.openssl.org/gitweb/?p=openssl.git;a=blobdiff_plain;f=Configure;h=c665526f945e71a4c6b2e4388918c20fc6660482;hp=c8749f79441050c58f907723a93cd0f045a25515;hb=1d7d74647ac9928e1097d27e3731d62c7fcc0c35;hpb=946cbf67afc5a76394008bcad9efa67deeefb172 diff --git a/Configure b/Configure index c8749f7944..c665526f94 100755 --- a/Configure +++ b/Configure @@ -51,6 +51,10 @@ my $usage="Usage: Configure [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [rsaref] [no # RC4_LONG use 'long' instead of 'int' for RC4_INT in crypto/rc4/rc4.h # RC4_INDEX define RC4_INDEX in crypto/rc4/rc4_locl.h. This turns on # array lookups instead of pointer use. +# RC4_CHUNK enables code that handles data aligned at long (natural CPU +# word) boundary. +# RC4_CHUNK_LL enables code that handles data aligned at long long boundary +# (intended for 64-bit CPUs running 32-bit OS). # BF_PTR use 'pointer arithmatic' for Blowfish (unsafe on Alpha). # BF_PTR2 intel specific version (generic version is more efficient). # MD5_ASM use some extra md5 assember, @@ -82,8 +86,8 @@ my $x86_bsdi_asm="asm/bn86bsdi.o asm/co86bsdi.o:asm/dx86bsdi.o asm/yx86bsdi.o:as # -DB_ENDIAN slows things down on a sparc for md5, but helps sha1. # So the md5_locl.h file has an undef B_ENDIAN if sun is defined -#config-string CC : CFLAGS : LDFLAGS : special header file mods:bn_asm \ -# des_asm:bf_asm +#config-string $cc : $cflags : $unistd : $thread_cflag : $lflags : $bn_ops : $bn_obj : $des_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj + my %table=( #"b", "$tcc:$tflags::$tlib:$bits1:$tbn_mul::", #"bl-4c-2c", "$tcc:$tflags::$tlib:${bits1}BN_LLONG RC4_CHAR MD2_CHAR:$tbn_mul::", @@ -97,47 +101,72 @@ my %table=( "debug-ben-debug", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown):::::", "debug-ben-strict", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe::(unknown):::::", "debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm", -"debug-bodo", "gcc:-DL_ENDIAN -g -m486 -Wall::-D_REENTRANT::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm", +"debug-bodo", "gcc:-DBIO_PAIR_DEBUG -DL_ENDIAN -DREF_CHECK -DCRYPTO_MDEBUG_ALL -g -m486 -pedantic -Wshadow -Wall::-D_REENTRANT::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm", +"debug-ulf", "gcc:-DL_ENDIAN -DREF_CHECK -DCRYPTO_MDEBUG_ALL -g -O2 -m486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT::$x86_gcc_des $x86_gcc_opts:$x86_elf_asm", +"debug-steve", "gcc:-DL_ENDIAN -DREF_CHECK -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -O2 -m486 -pedantic -Wall -Wshadow -pipe::-D_REENTRANT::$x86_gcc_des $x86_gcc_opts:$x86_elf_asm", "dist", "cc:-O::(unknown):::::", # Basic configs that should work on any box "gcc", "gcc:-O3::(unknown)::BN_LLONG:::", "cc", "cc:-O::(unknown):::::", -# Solaris setups +#### Solaris x86 setups "solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_sol_asm", -"solaris-sparc-gcc","gcc:-O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8.o::", -"solaris-usparc-gcc","gcc:-O3 -fomit-frame-pointer -mcpu=ultrasparc -Wall -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc.o:::asm/md5-sparcv8plus.o:", -"solaris-usparc-oldgcc","gcc:-O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc.o:::asm/md5-sparcv8plus.o:", -"debug-solaris-sparc-gcc","gcc:-O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::", -"debug-solaris-usparc-gcc","gcc:-O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc.o::", +#### SPARC Solaris with GNU C setups +"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::", +"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o::", +"solaris-sparcv9-gcc","gcc:-mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:", +# gcc pre-2.8 doesn't understand -mcpu=ultrasparc, so fall down to -mv8 +# but keep the assembler modules. +"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o:", +#### +"debug-solaris-sparcv8-gcc","gcc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o::", +"debug-solaris-sparcv9-gcc","gcc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o::", + +#### SPARC Solaris with Sun C setups # DO NOT use /xO[34] on sparc with SC3.0. It is broken, and will not pass the tests -"solaris-sparc-sc3","cc:-fast -O -Xa -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_UNROLL BF_PTR:::", -# SC4 is ok, better than gcc even on bn as long as you tell it -xarch=v8 -# -fast slows things like DES down quite a lot +"solaris-sparc-sc3","cc:-fast -O -Xa -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR:::", +# SC4.0 doesn't pass 'make test', upgrade to SC5.0 or SC4.2. +# SC4.2 is ok, better than gcc even on bn as long as you tell it -xarch=v8 # SC5.0 note: Compiler common patch 107357-01 or later is required! -"solaris-sparc-cc","cc:-xarch=v8 -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::", -"solaris-usparc-cc","cc:-xtarget=ultra -xarch=v8plus -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DULTRASPARC -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:", -"solaris64-usparc-cc","cc:-xtarget=ultra -xarch=v9 -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:SIXTY_FOUR_BIT_LONG RC4_CHAR DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:", +"solaris-sparcv7-cc","cc:-xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:::", +"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::", +"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:", +"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:", +#### +"debug-solaris-sparcv8-cc","cc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -xarch=v8 -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::", +"debug-solaris-sparcv9-cc","cc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -xtarget=ultra -xarch=v8plus -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:", + +#### SPARC Linux setups +"linux-sparcv7","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::", +# Ray Miller has patiently +# assisted with debugging of following two configs. +"linux-sparcv8","gcc:-mv8 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o::::", +# it's a real mess with -mcpu=ultrasparc option under Linux, but +# -Wa,-Av8plus should do the trick no matter what. +"linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DULTRASPARC -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:", +# !!!Folowing can't be even tested yet!!! +# We have to wait till 64-bit glibc for SPARC is operational!!! +#"linux64-sparcv9","sparc64-linux-gcc:-m64 -mcpu=v9 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DULTRASPARC -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:", # Sunos configs, assuming sparc for the gcc one. ##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::(unknown)::DES_UNROLL:::", -"sunos-gcc","gcc:-O3 -mv8::(unknown)::BN_LLONG RC4_CHAR DES_UNROLL DES_PTR DES_RISC1:::", - -# SGI configurations. If the box is rather old (r3000 cpu), you will -# probably have to remove the '-mips2' flag. I've only been using -# IRIX 5.[23]. -# I've recently done 32 and 64 bit mips assember, it make this RSA -# 3 times faster, use if at all possible. -#"irix-gcc","gcc:-O2 -mips2::SIXTY_FOUR_BIT BN_LLONG RC4_INDEX RC4_CHAR:::", -"irix-gcc","gcc:-O2 -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::", -"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG DES_PTR DES_RISC2 DES_UNROLL BF_PTR:::", -"irix-mips3-gcc","gcc:-mips3 -O2 -DTERMIOS -DB_ENDIAN::(unknown)::MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:::", -"irix-mips3-cc", "cc:-n32 -mips3 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::DES_PTR DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:::", -"debug-irix-cc", "cc:-w2 -g -DCRYPTO_MDEBUG -DTERMIOS -DB_ENDIAN::(unknown):::::", -# This is the n64 mode build. -"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:::", +"sunos-gcc","gcc:-O3 -mv8::(unknown)::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL DES_PTR DES_RISC1:::", + +#### IRIX 5.x configs +# -mips2 flag is added by ./config when appropriate. +"irix-gcc","gcc:-O3 -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::", +"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC2 DES_UNROLL BF_PTR:::", +#### IRIX 6.x configs +# Only N32 and N64 ABIs are supported. If you need O32 ABI build, invoke +# './Configure irix-[g]cc' manually. +# -mips4 flag is added by ./config when appropriate. +"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::(unknown)::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::", +"irix-mips3-cc", "cc:-n32 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::(unknown)::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::", +# N64 ABI builds. +"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::(unknown)::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::", +"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::(unknown)::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::", # HPUX 9.X config. # Don't use the bundled cc. It is broken. Use HP ANSI C if possible, or @@ -145,9 +174,9 @@ my %table=( "hpux-cc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z::(unknown)::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::", # If hpux-cc fails (e.g. during "make test"), try the next one; otherwise, -# please report your OS and compiler version to the bugs@openssl.org +# please report your OS and compiler version to the openssl-bugs@openssl.org # mailing list. -"hpux-brokencc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z::(unknown)::DES_PTR DES_UNROLL DES_RISC1:::", +"hpux-brokencc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::(unknown)::DES_PTR DES_UNROLL DES_RISC1:::", "hpux-gcc", "gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown)::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::", # If hpux-gcc fails, try this one: @@ -155,8 +184,8 @@ my %table=( # HPUX 10.X config. Supports threads. "hpux10-cc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z::-D_REENTRANT::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::", -# If hpux10-cc fails, try this one: -"hpux10-brokencc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z::-D_REENTRANT::DES_PTR DES_UNROLL DES_RISC1:::", +# If hpux10-cc fails, try this one (if still fails, try deleting BN_LLONG): +"hpux10-brokencc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::-D_REENTRANT::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::", "hpux10-gcc", "gcc:-DB_ENDIAN -DBN_DIV2W -O3::-D_REENTRANT::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::", # If hpux10-gcc fails, try this one: @@ -170,15 +199,18 @@ my %table=( # Dec Alpha, OSF/1 - the alpha164-cc is the flags for a 21164A with # the new compiler # For gcc, the following gave a %50 speedup on a 164 over the 'DES_INT' version -"alpha-gcc","gcc:-O3::(unknown)::SIXTY_FOUR_BIT_LONG DES_UNROLL DES_RISC1:::", -"alpha-cc", "cc:-std1 -tune host -O4 -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG:::", -"alpha164-cc", "cc:-std1 -tune host -fast -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG:::", -"FreeBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:::", +"alpha-gcc","gcc:-O3::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_RISC1:asm/alpha.o::", +"alpha-cc", "cc:-std1 -tune host -O4 -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:asm/alpha.o::", +"alpha164-cc", "cc:-std1 -tune host -fast -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:asm/alpha.o::", +"FreeBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC2:::", + +#### Alpha Linux with GNU C and Compaq C setups +"linux-alpha-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_UNROLL:asm/alpha.o::", +"linux-alpha+bwx-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL:asm/alpha.o::", +"linux-alpha-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:asm/alpha.o::", +"linux-alpha+bwx-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:asm/alpha.o::", # assembler versions -- currently defunct: -##"alpha-gcc","gcc:-O3::(unknown)::SIXTY_FOUR_BIT_LONG DES_UNROLL DES_RISC1:asm/alpha.o::", -##"alpha-cc", "cc:-tune host -O4 -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG:asm/alpha.o::", -##"alpha164-cc", "cc:-tune host -fast -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG:asm/alpha.o::", ##"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:asm/alpha.o::", # The intel boxes :-), It would be worth seeing if bsdi-gcc can use the @@ -188,14 +220,11 @@ my %table=( "linux-aout", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm", "linux-mips", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown)::BN_LLONG:::", "linux-ppc", "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown)::::", -"linux-sparc","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG RC4_CHAR DES_UNROLL BF_PTR::", -"linux-sparc64","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -mv8 -Wall::-D_REENTRANT:::::", "NetBSD-sparc", "gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::", "NetBSD-m68", "gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::", "NetBSD-x86", "gcc:-DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:", -#"FreeBSD", "gcc:-DTERMIOS -DL_ENDIAN -D_ANSI_SOURCE -fomit-frame-pointer -O3 -m486 -Wall:(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm", -"FreeBSD", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm", "FreeBSD-elf", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm", +"FreeBSD", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm", "bsdi-gcc", "gcc:-O3 -ffast-math -DL_ENDIAN -DPERL5 -m486::(unknown)::RSA_LLONG $x86_gcc_des $x86_gcc_opts:$x86_bsdi_asm", "bsdi-elf-gcc", "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm", "nextstep", "cc:-O -Wall::(unknown)::BN_LLONG $x86_gcc_des ${x86_gcc_opts}:::", @@ -232,7 +261,7 @@ my %table=( # for some st_addr stuff, and then sizeof and address-of fails # I could not use the ams/alpha.o option because the Cray assembler, 'cam' # did not like it. -"cray-t3e", "cc: -DBIT_FIELD_LIMITS -DTERMIOS::(unknown)::SIXTY_FOUR_BIT_LONG DES_INT:::", +"cray-t3e", "cc: -DBIT_FIELD_LIMITS -DTERMIOS::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT:::", # DGUX, 88100. "dgux-R3-gcc", "gcc:-O3 -fomit-frame-pointer::(unknown)::RC4_INDEX DES_UNROLL:::", @@ -255,20 +284,22 @@ my %table=( # Windows NT, Microsoft Visual C++ 4.0 -"VC-NT","cl:::(unknown)::BN_LLONG RC4_INDEX ${x86_gcc_opts}:::", -"VC-WIN32","cl:::(unknown)::BN_LLONG RC4_INDEX ${x86_gcc_opts}:::", +"VC-NT","cl:::::BN_LLONG RC4_INDEX ${x86_gcc_opts}:::", +"VC-WIN32","cl:::::BN_LLONG RC4_INDEX ${x86_gcc_opts}:::", "VC-WIN16","cl:::(unknown)::MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX THIRTY_TWO_BIT:::", "VC-W31-16","cl:::(unknown)::BN_LLONG MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX SIXTEEN_BIT:::", -"VC-W31-32","cl:::(unknown)::BN_LLONG MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX THIRTY_TWO_BIT:::", +"VC-W31-32","cl:::::BN_LLONG MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX THIRTY_TWO_BIT:::", "VC-MSDOS","cl:::(unknown)::BN_LLONG MD2_CHAR DES_UNROLL DES_PTR RC4_INDEX SIXTEEN_BIT:::", # Borland C++ 4.5 -"BC-32","bcc32:::(unknown)::BN_LLONG DES_PTR RC4_INDEX:::", +"BC-32","bcc32:::::BN_LLONG DES_PTR RC4_INDEX:::", "BC-16","bcc:::(unknown)::BN_LLONG DES_PTR RC4_INDEX SIXTEEN_BIT:::", # CygWin32 -"CygWin32", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:", -"Mingw32", "gcc:-DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown):BN_LLONG $x86_gcc_des $x86_gcc_opts:", +# (Note: the real CFLAGS for Windows builds are defined by util/mk1mf.pl +# and its library files in util/pl/*) +"CygWin32", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::::BN_LLONG $x86_gcc_des $x86_gcc_opts:", +"Mingw32", "gcc:-DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::::BN_LLONG $x86_gcc_des $x86_gcc_opts:", # Ultrix from Bernhard Simon "ultrix-cc","cc:-std1 -O -Olimit 1000 -DL_ENDIAN::(unknown)::::::", @@ -318,7 +349,8 @@ my $ranlib; my $perl; $ranlib=&which("ranlib") or $ranlib="true"; -$perl=&which("perl5") or $perl=&which("perl") or $perl="perl"; +$perl=$ENV{'PERL'} or $perl=&which("perl5") or $perl=&which("perl") + or $perl="perl"; &usage if ($#ARGV < 0); @@ -345,6 +377,13 @@ foreach (@ARGV) $algo =~ tr/[a-z]/[A-Z]/; $flags .= "-DNO_$algo "; $depflags .= "-DNO_$algo "; + if ($algo eq "DES") + { + push @skip, "mdc2"; + $options .= " no-mdc2"; + $flags .= "-DNO_MDC2 "; + $depflags .= "-DNO_MDC2 "; + } } elsif (/^386$/) { $processor=386; } @@ -391,7 +430,13 @@ foreach (@ARGV) die "target already defined - $target\n" if ($target ne ""); $target=$_; } - $options .= $_ unless $_ eq $target; + unless ($_ eq $target) { + if ($options eq "") { + $options = $_; + } else { + $options .= " ".$_; + } + } } if ($target eq "TABLE") { @@ -499,18 +544,19 @@ if ($version =~ /(^[0-9]*)\.([0-9\.]*)/) open(IN,'$Makefile") || die "unable to create $Makefile:$!\n"; +print OUT "### Generated automatically from Makefile.org by Configure.\n\n"; my $sdirs=0; while () { chop; $sdirs = 1 if /^SDIRS=/; - $sdirs = 0 unless /\\$/; if ($sdirs) { my $dir; foreach $dir (@skip) { s/$dir//; } } + $sdirs = 0 unless /\\$/; s/^VERSION=.*/VERSION=$version/; s/^MAJOR=.*/MAJOR=$major/; s/^MINOR=.*/MINOR=$minor/; @@ -567,6 +613,7 @@ my $md2_int=$def_int; my $idea_int=$def_int; my $rc2_int=$def_int; my $rc4_idx=0; +my $rc4_chunk=0; my $bf_ptr=0; my @type=("char","short","int","long"); my ($b64l,$b64,$b32,$b16,$b8)=(0,0,1,0,0); @@ -584,6 +631,8 @@ foreach (sort split(/\s+/,$bn_ops)) $rc4_int=0 if /RC4_CHAR/; $rc4_int=3 if /RC4_LONG/; $rc4_idx=1 if /RC4_INDEX/; + $rc4_chunk=1 if /RC4_CHUNK/; + $rc4_chunk=2 if /RC4_CHUNK_LL/; $md2_int=0 if /MD2_CHAR/; $md2_int=3 if /MD2_LONG/; $idea_int=1 if /IDEA_SHORT/; @@ -601,6 +650,7 @@ foreach (sort split(/\s+/,$bn_ops)) open(IN,'crypto/opensslconf.h') || die "unable to create crypto/opensslconf.h:$!\n"; +print OUT "/* Generated automatically from opensslconf.h.in by Configure. */\n\n"; while () { if (/^#define\s+OPENSSLDIR/) @@ -635,6 +685,12 @@ while () { printf OUT "#%s DES_UNROLL\n",($des_unroll)?'define':'undef'; } elsif (/^#define\s+RC4_INT\s/) { printf OUT "#define RC4_INT unsigned %s\n",$type[$rc4_int]; } + elsif (/^#undef\s+RC4_CHUNK/) + { + printf OUT "#undef RC4_CHUNK\n" if $rc4_chunk==0; + printf OUT "#define RC4_CHUNK unsigned long\n" if $rc4_chunk==1; + printf OUT "#define RC4_CHUNK unsigned long long\n" if $rc4_chunk==2; + } elsif (/^#((define)|(undef))\s+RC4_INDEX/) { printf OUT "#%s RC4_INDEX\n",($rc4_idx)?"define":"undef"; } elsif (/^#(define|undef)\s+I386_ONLY/) @@ -674,6 +730,9 @@ print "DES_INT used\n" if $des_int; print "BN_LLONG mode\n" if $bn_ll; print "RC4 uses u$type[$rc4_int]\n" if $rc4_int != $def_int; print "RC4_INDEX mode\n" if $rc4_idx; +print "RC4_CHUNK is undefined\n" if $rc4_chunk==0; +print "RC4_CHUNK is unsigned long\n" if $rc4_chunk==1; +print "RC4_CHUNK is unsigned long long\n" if $rc4_chunk==2; print "MD2 uses u$type[$md2_int]\n" if $md2_int != $def_int; print "IDEA uses u$type[$idea_int]\n" if $idea_int != $def_int; print "RC2 uses u$type[$rc2_int]\n" if $rc2_int != $def_int; @@ -681,10 +740,17 @@ print "BF_PTR used\n" if $bf_ptr == 1; print "BF_PTR2 used\n" if $bf_ptr == 2; if($IsWindows) { - open (OUT,">crypto/date.h") || die "Can't open date.h"; - printf OUT "#define DATE \"%s\"\n", scalar gmtime(); + open (OUT,">crypto/buildinf.h") || die "Can't open buildinf.h"; + printf OUT <crypto/objects/obj_dat.h"; } else { (system "make -f Makefile.ssl PERL=\'$perl\' links") == 0 or exit $?; ### (system 'make depend') == 0 or exit $? if $depflags ne ""; @@ -693,51 +759,25 @@ if($IsWindows) { &dofile("tools/c_rehash",$openssldir,'^DIR=', 'DIR=%s',); if ( $perl =~ m@^/@) { &dofile("apps/der_chop",$perl,'^#!/', '#!%s'); + &dofile("apps/CA.pl",$perl,'^#!/', '#!%s'); } else { # No path for Perl known ... &dofile("apps/der_chop",'/usr/local/bin/perl','^#!/', '#!%s'); + &dofile("apps/CA.pl",'/usr/local/bin/perl','^#!/', '#!%s'); } } -my $pwd; - -if($IsWindows) { - $pwd="(current directory)"; -} else { - $pwd =`pwd`; - chop($pwd); -} print < -should be used instead of #include . -These new file locations allow installing the OpenSSL header -files in /usr/local/include/openssl/ and should help avoid -conflicts with other libraries. - -To compile programs that use the old form , -usually an additional compiler option will suffice: E.g., add - -I$prefix/include/openssl -or - -I$pwd/include/openssl -to the CFLAGS in the Makefile of the program that you want to compile -(and leave all the original -I...'s in place!). - -Please make sure that no old OpenSSL header files are around: -The include directory should now be empty except for the openssl -subdirectory. - +NOTE: OpenSSL header files were moved from <*.h> to ; +see file INSTALL for hints on coping with compatibility problems. EOF print <<\EOF if (!$no_threads && !$threads); The library could not be configured for supporting multi-threaded applications as the compiler options required on this system are not known. -See file INSTALL for details. - +See file INSTALL for details if you need multi-threading. EOF exit(0);