Update Configure to know about tls1_3

[openssl.git] / test / recipes / 80-test_ssl_new.t

diff --git a/test/recipes/80-test_ssl_new.t b/test/recipes/80-test_ssl_new.t
index da98f18fb6c9d44b3a183acb271ee8e12c7d3f93..1e92907d56061f6b445bb9a7063473222a803217 100644 (file)
--- a/test/recipes/80-test_ssl_new.t
+++ b/test/recipes/80-test_ssl_new.t
@@ -1,10 +1,18 @@
-#! /usr/bin/perl
+#! /usr/bin/env perl
+# Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
 
 use strict;
 use warnings;
 
 use File::Basename;
 use File::Compare qw/compare_text/;
+use if $^O ne "VMS", 'File::Glob' => qw/glob/;
 
 use OpenSSL::Test qw/:DEFAULT srctop_dir srctop_file/;
 use OpenSSL::Test::Utils qw/disabled alldisabled available_protocols/;
@@ -12,31 +20,75 @@ use OpenSSL::Test::Utils qw/disabled alldisabled available_protocols/;
 setup("test_ssl_new");
 
 $ENV{TEST_CERTS_DIR} = srctop_dir("test", "certs");
+$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
 
-my @conf_srcs =  glob(srctop_file("test", "ssl-tests", "*.conf"));
-my @conf_files = map {basename($_)} @conf_srcs;
-
-# 02-protocol-version.conf test results depend on the configuration of enabled
-# protocols. We only verify generated sources in the default configuration.
-my $is_default = (disabled("ssl3") && !disabled("tls1") &&
-                  !disabled("tls1_1") && !disabled("tls1_2"));
+my @conf_srcs =  glob(srctop_file("test", "ssl-tests", "*.conf.in"));
+map { s/;.*// } @conf_srcs if $^O eq "VMS";
+my @conf_files = map { basename($_) } @conf_srcs;
+map { s/\.in// } @conf_files;
 
-my %conf_dependent_tests = ("02-protocol-version.conf" => 1);
+# We hard-code the number of tests to double-check that the globbing above
+# finds all files as expected.
+plan tests => 18;  # = scalar @conf_srcs
+
+# Some test results depend on the configuration of enabled protocols. We only
+# verify generated sources in the default configuration.
+my $is_default_tls = (disabled("ssl3") && !disabled("tls1") &&
+                      !disabled("tls1_1") && !disabled("tls1_2") &&
+                      disabled("tls1_3"));
+
+my $is_default_dtls = (!disabled("dtls1") && !disabled("dtls1_2"));
+
+my $no_tls = alldisabled(available_protocols("tls"));
+my $no_dtls = alldisabled(available_protocols("dtls"));
+my $no_npn = disabled("nextprotoneg");
+my $no_ct = disabled("ct");
+my $no_ec = disabled("ec");
+my $no_ec2m = disabled("ec2m");
+my $no_ocsp = disabled("ocsp");
+
+# Add your test here if the test conf.in generates test cases and/or
+# expectations dynamically based on the OpenSSL compile-time config.
+my %conf_dependent_tests = (
+  "02-protocol-version.conf" => !$is_default_tls,
+  "04-client_auth.conf" => !$is_default_tls,
+  "07-dtls-protocol-version.conf" => !$is_default_dtls,
+  "10-resumption.conf" => !$is_default_tls,
+  "11-dtls_resumption.conf" => !$is_default_dtls,
+);
+
+# Add your test here if it should be skipped for some compile-time
+# configurations. Default is $no_tls but some tests have different skip
+# conditions.
+my %skip = (
+  "07-dtls-protocol-version.conf" => $no_dtls,
+  "08-npn.conf" => $no_tls || $no_npn,
+  "10-resumption.conf" => disabled("tls1_1") || disabled("tls1_2"),
+  "11-dtls_resumption.conf" => disabled("dtls1") || disabled("dtls1_2"),
+  "12-ct.conf" => $no_tls || $no_ct || $no_ec,
+  # We could run some of these tests without TLS 1.2 if we had a per-test
+  # disable instruction but that's a bizarre configuration not worth
+  # special-casing for.
+  # We should review this once we have TLS 1.3.
+  "13-fragmentation.conf" => disabled("tls1_2"),
+  "14-curves.conf" => disabled("tls1_2") || $no_ec || $no_ec2m,
+  "15-certstatus.conf" => $no_ocsp,
+  "16-dtls-certstatus.conf" => $no_dtls || $no_ocsp,
+  "18-dtls-renegotiate.conf" => $no_dtls,
+);
 
 foreach my $conf (@conf_files) {
     subtest "Test configuration $conf" => sub {
-        test_conf($conf, $conf_dependent_tests{$conf} ?  0 : 1);
+        test_conf($conf,
+                  $conf_dependent_tests{$conf} || $^O eq "VMS" ?  0 : 1,
+                  defined($skip{$conf}) ? $skip{$conf} : $no_tls);
     }
 }
 
-# We hard-code the number of tests to double-check that the globbing above
-# finds all files as expected.
-plan tests => 2;  # = scalar @conf_files
-
 sub test_conf {
     plan tests => 3;
 
-    my ($conf, $check_source) = @_;
+    my ($conf, $check_source, $skip) = @_;
 
     my $conf_file = srctop_file("test", "ssl-tests", $conf);
     my $tmp_file = "${conf}.$$.tmp";
@@ -48,6 +100,7 @@ sub test_conf {
 
       skip 'failure', 2 unless
         ok(run(perltest(["generate_ssl_tests.pl", $input_file],
+                        interpreter_args => [ "-I", srctop_dir("test", "testlib")],
                         stdout => $tmp_file)),
            "Getting output from generate_ssl_tests.pl.");
 
@@ -61,8 +114,7 @@ sub test_conf {
       }
 
       # Test 3. Run the test.
-      my $no_tls = alldisabled(available_protocols("tls"));
-      skip "No TLS tests available; skipping tests", 1 if $no_tls;
+      skip "No tests available; skipping tests", 1 if $skip;
       skip "Stale sources; skipping tests", 1 if !$run_test;
 
       ok(run(test(["ssl_test", $tmp_file])), "running ssl_test $conf");