use POSIX;
use File::Spec;
use File::Copy;
-use OpenSSL::Test qw/:DEFAULT with top_file/;
+use OpenSSL::Test qw/:DEFAULT with top_file cmdstr/;
+use OpenSSL::Test::Utils;
setup("test_ssl");
+my ($no_rsa, $no_dsa, $no_dh, $no_ec, $no_srp, $no_psk,
+ $no_ssl3, $no_tls1, $no_tls1_1, $no_tls1_2,
+ $no_dtls, $no_dtls1, $no_dtls1_2) =
+ anydisabled qw/rsa dsa dh ec srp psk
+ ssl3 tls1 tls1_1 tls1_2
+ dtls dtls1 dtls1_2/;
+my $no_anytls = alldisabled(available_protocols("tls"));
+my $no_anydtls = alldisabled(available_protocols("dtls"));
+
+plan skip_all => "No SSL/TLS/DTLS protocol is support by this OpenSSL build"
+ if $no_anytls && $no_anydtls;
+
my $digest = "-sha1";
my @reqcmd = ("openssl", "req");
my @x509cmd = ("openssl", "x509", $digest);
my $Ureq="reqU.ss";
my $Ucert="certU.ss";
+my $Dkey="keyD.ss";
+my $Dreq="reqD.ss";
+my $Dcert="certD.ss";
+
+my $Ekey="keyE.ss";
+my $Ereq="reqE.ss";
+my $Ecert="certE.ss";
+
my $P1conf=top_file("test","P1ss.cnf");
my $P1key="keyP1.ss";
my $P1req="reqP1.ss";
plan tests =>
1 # For testss
+ 1 # For ssltest -test_cipherlist
- + 8 # For the first testssl
- + 8 * 4 * 4 # For the first testsslproxy (16 times testssl)
- + 8 * 4 * 4 # For the second testsslproxy (16 times testssl)
+ + 10 # For the first testssl
+ + 16 # For the first testsslproxy
+ + 16 # For the second testsslproxy
;
subtest 'test_ss' => sub {
testssl("keyU.ss", $Ucert, $CAcert);
note('test_ssl -- key P1');
- testsslproxy("keyP1.ss", "certP1.ss", "intP1.ss");
+ testsslproxy("keyP1.ss", "certP1.ss", "intP1.ss", "AB");
note('test_ssl -- key P2');
- testsslproxy("keyP2.ss", "certP2.ss", "intP2.ss");
+ testsslproxy("keyP2.ss", "certP2.ss", "intP2.ss", "BC");
}
# -----------
print RND "string to make the random number generator think it has entropy";
close RND;
+ my @req_dsa = ("-newkey",
+ "dsa:".File::Spec->catfile("..", "apps", "dsa1024.pem"));;
my @req_new;
- if (run(app(["openssl", "no-rsa"], stdout => undef))) {
- @req_new = ("-newkey",
- "dsa:".File::Spec->catfile("..", "apps", "dsa512.pem"));
+ if ($no_rsa) {
+ @req_new = @req_dsa;
} else {
@req_new = ("-new");
}
- plan tests => 15;
+ plan tests => 17;
SKIP: {
- skip 'failure', 14 unless
+ skip 'failure', 16 unless
ok(run(app([@reqcmd, "-config", $CAconf,
"-out", $CAreq, "-keyout", $CAkey,
@req_new])),
'make cert request');
- skip 'failure', 13 unless
+ skip 'failure', 15 unless
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $CAreq, "-days", "30",
"-req", "-out", $CAcert, "-signkey", $CAkey,
"-extfile", $CAconf, "-extensions", "v3_ca"],
stdout => "err.ss")),
'convert request into self-signed cert');
- skip 'failure', 12 unless
+ skip 'failure', 14 unless
ok(run(app([@x509cmd, "-in", $CAcert,
"-x509toreq", "-signkey", $CAkey, "-out", $CAreq2],
stdout => "err.ss")),
'convert cert into a cert request');
- skip 'failure', 11 unless
+ skip 'failure', 13 unless
ok(run(app([@reqcmd, "-config", $dummycnf,
"-verify", "-in", $CAreq, "-noout"])),
'verify request 1');
- skip 'failure', 10 unless
+ skip 'failure', 12 unless
ok(run(app([@reqcmd, "-config", $dummycnf,
"-verify", "-in", $CAreq2, "-noout"])),
'verify request 2');
- skip 'failure', 9 unless
+ skip 'failure', 11 unless
ok(run(app([@verifycmd, "-CAfile", $CAcert, $CAcert])),
'verify signature');
- skip 'failure', 8 unless
+ skip 'failure', 10 unless
ok(run(app([@reqcmd, "-config", $Uconf,
"-out", $Ureq, "-keyout", $Ukey, @req_new],
stdout => "err.ss")),
'make a user cert request');
- skip 'failure', 7 unless
+ skip 'failure', 9 unless
ok(run(app([@x509cmd, "-CAcreateserial", "-in", $Ureq, "-days", "30",
"-req", "-out", $Ucert,
"-CA", $CAcert, "-CAkey", $CAkey, "-CAserial", $CAserial,
&& run(app([@verifycmd, "-CAfile", $CAcert, $Ucert])),
'sign user cert request');
- skip 'failure', 6 unless
+ skip 'failure', 8 unless
ok(run(app([@x509cmd,
"-subject", "-issuer", "-startdate", "-enddate",
"-noout", "-in", $Ucert])),
'Certificate details');
+ skip 'failure', 7 unless
+ subtest 'DSA certificate creation' => sub {
+ plan skip_all => "skipping DSA certificate creation"
+ if $no_dsa;
+
+ plan tests => 4;
+
+ SKIP: {
+ $ENV{CN2} = "DSA Certificate";
+ skip 'failure', 3 unless
+ ok(run(app([@reqcmd, "-config", $Uconf,
+ "-out", $Dreq, "-keyout", $Dkey,
+ @req_dsa],
+ stdout => "err.ss")),
+ "make a DSA user cert request");
+ skip 'failure', 2 unless
+ ok(run(app([@x509cmd, "-CAcreateserial",
+ "-in", $Dreq,
+ "-days", "30",
+ "-req",
+ "-out", $Dcert,
+ "-CA", $CAcert, "-CAkey", $CAkey,
+ "-CAserial", $CAserial,
+ "-extfile", $Uconf,
+ "-extensions", "v3_ee_dsa"],
+ stdout => "err.ss")),
+ "sign DSA user cert request");
+ skip 'failure', 1 unless
+ ok(run(app([@verifycmd, "-CAfile", $CAcert, $Dcert])),
+ "verify DSA user cert");
+ skip 'failure', 0 unless
+ ok(run(app([@x509cmd,
+ "-subject", "-issuer",
+ "-startdate", "-enddate", "-noout",
+ "-in", $Dcert])),
+ "DSA Certificate details");
+ }
+ };
+
+ skip 'failure', 6 unless
+ subtest 'ECDSA/ECDH certificate creation' => sub {
+ plan skip_all => "skipping ECDSA/ECDH certificate creation"
+ if $no_ec;
+
+ plan tests => 5;
+
+ SKIP: {
+ $ENV{CN2} = "ECDSA Certificate";
+ skip 'failure', 4 unless
+ ok(run(app(["openssl", "ecparam", "-name", "P-256",
+ "-out", "ecp.ss"])),
+ "make EC parameters");
+ skip 'failure', 3 unless
+ ok(run(app([@reqcmd, "-config", $Uconf,
+ "-out", $Ereq, "-keyout", $Ekey,
+ "-newkey", "ec:ecp.ss"],
+ stdout => "err.ss")),
+ "make a ECDSA/ECDH user cert request");
+ skip 'failure', 2 unless
+ ok(run(app([@x509cmd, "-CAcreateserial",
+ "-in", $Ereq,
+ "-days", "30",
+ "-req",
+ "-out", $Ecert,
+ "-CA", $CAcert, "-CAkey", $CAkey,
+ "-CAserial", $CAserial,
+ "-extfile", $Uconf,
+ "-extensions", "v3_ee_ec"],
+ stdout => "err.ss")),
+ "sign ECDSA/ECDH user cert request");
+ skip 'failure', 1 unless
+ ok(run(app([@verifycmd, "-CAfile", $CAcert, $Ecert])),
+ "verify ECDSA/ECDH user cert");
+ skip 'failure', 0 unless
+ ok(run(app([@x509cmd,
+ "-subject", "-issuer",
+ "-startdate", "-enddate", "-noout",
+ "-in", $Ecert])),
+ "ECDSA Certificate details");
+ }
+ };
skip 'failure', 5 unless
ok(run(app([@reqcmd, "-config", $P1conf,
my @extra = @_;
my @ssltest = ("ssltest",
- "-key", $key, "-cert", $cert,
+ "-s_key", $key, "-s_cert", $cert,
"-c_key", $key, "-c_cert", $cert);
my $serverinfo = top_file("test","serverinfo.pem");
}
- # plan tests => 7;
+ # plan tests => 10;
subtest 'standard SSL tests' => sub {
######################################################################
plan tests => 27;
- ok(run(test([@ssltest, "-ssl3", @extra])),
- 'test sslv3');
- ok(run(test([@ssltest, "-ssl3", "-server_auth", @CA, @extra])),
- 'test sslv3 with server authentication');
- ok(run(test([@ssltest, "-ssl3", "-client_auth", @CA, @extra])),
- 'test sslv3 with client authentication');
- ok(run(test([@ssltest, "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
- 'test sslv3 with both server and client authentication');
- ok(run(test([@ssltest, @extra])),
- 'test sslv2/sslv3');
- ok(run(test([@ssltest, "-server_auth", @CA, @extra])),
- 'test sslv2/sslv3 with server authentication');
- ok(run(test([@ssltest, "-client_auth", @CA, @extra])),
- 'test sslv2/sslv3 with client authentication');
- ok(run(test([@ssltest, "-server_auth", "-client_auth", @CA, @extra])),
- 'test sslv2/sslv3 with both server and client authentication');
- ok(run(test([@ssltest, "-bio_pair", "-ssl3", @extra])),
- 'test sslv3 via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA, @extra])),
- 'test sslv3 with server authentication via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA, @extra])),
- 'test sslv3 with client authentication via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
- 'test sslv3 with both server and client authentication via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", @extra])),
- 'test sslv2/sslv3 via BIO pair');
- ok(run(test([@ssltest, "-dtls1", @extra])),
- 'test dtlsv1');
- ok(run(test([@ssltest, "-dtls1", "-server_auth", @CA, @extra])),
+ SKIP: {
+ skip "SSLv3 is not supported by this OpenSSL build", 4
+ if disabled("ssl3");
+
+ ok(run(test([@ssltest, "-ssl3", @extra])),
+ 'test sslv3');
+ ok(run(test([@ssltest, "-ssl3", "-server_auth", @CA, @extra])),
+ 'test sslv3 with server authentication');
+ ok(run(test([@ssltest, "-ssl3", "-client_auth", @CA, @extra])),
+ 'test sslv3 with client authentication');
+ ok(run(test([@ssltest, "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
+ 'test sslv3 with both server and client authentication');
+ }
+
+ SKIP: {
+ skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 4
+ if $no_anytls;
+
+ ok(run(test([@ssltest, @extra])),
+ 'test sslv2/sslv3');
+ ok(run(test([@ssltest, "-server_auth", @CA, @extra])),
+ 'test sslv2/sslv3 with server authentication');
+ ok(run(test([@ssltest, "-client_auth", @CA, @extra])),
+ 'test sslv2/sslv3 with client authentication');
+ ok(run(test([@ssltest, "-server_auth", "-client_auth", @CA, @extra])),
+ 'test sslv2/sslv3 with both server and client authentication');
+ }
+
+ SKIP: {
+ skip "SSLv3 is not supported by this OpenSSL build", 4
+ if disabled("ssl3");
+
+ ok(run(test([@ssltest, "-bio_pair", "-ssl3", @extra])),
+ 'test sslv3 via BIO pair');
+ ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", @CA, @extra])),
+ 'test sslv3 with server authentication via BIO pair');
+ ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-client_auth", @CA, @extra])),
+ 'test sslv3 with client authentication via BIO pair');
+ ok(run(test([@ssltest, "-bio_pair", "-ssl3", "-server_auth", "-client_auth", @CA, @extra])),
+ 'test sslv3 with both server and client authentication via BIO pair');
+ }
+
+ SKIP: {
+ skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 1
+ if $no_anytls;
+
+ ok(run(test([@ssltest, "-bio_pair", @extra])),
+ 'test sslv2/sslv3 via BIO pair');
+ }
+
+ SKIP: {
+ skip "DTLSv1 is not supported by this OpenSSL build", 4
+ if disabled("dtls1");
+
+ ok(run(test([@ssltest, "-dtls1", @extra])),
+ 'test dtlsv1');
+ ok(run(test([@ssltest, "-dtls1", "-server_auth", @CA, @extra])),
'test dtlsv1 with server authentication');
- ok(run(test([@ssltest, "-dtls1", "-client_auth", @CA, @extra])),
- 'test dtlsv1 with client authentication');
- ok(run(test([@ssltest, "-dtls1", "-server_auth", "-client_auth", @CA, @extra])),
- 'test dtlsv1 with both server and client authentication');
- ok(run(test([@ssltest, "-dtls12", @extra])),
- 'test dtlsv1.2');
- ok(run(test([@ssltest, "-dtls12", "-server_auth", @CA, @extra])),
- 'test dtlsv1.2 with server authentication');
- ok(run(test([@ssltest, "-dtls12", "-client_auth", @CA, @extra])),
- 'test dtlsv1.2 with client authentication');
- ok(run(test([@ssltest, "-dtls12", "-server_auth", "-client_auth", @CA, @extra])),
- 'test dtlsv1.2 with both server and client authentication');
- {
- SKIP: {
- skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;
-
- ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe", @extra])),
- 'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
- }
+ ok(run(test([@ssltest, "-dtls1", "-client_auth", @CA, @extra])),
+ 'test dtlsv1 with client authentication');
+ ok(run(test([@ssltest, "-dtls1", "-server_auth", "-client_auth", @CA, @extra])),
+ 'test dtlsv1 with both server and client authentication');
+ }
+
+ SKIP: {
+ skip "DTLSv1.2 is not supported by this OpenSSL build", 4
+ if disabled("dtls1_2");
+
+ ok(run(test([@ssltest, "-dtls12", @extra])),
+ 'test dtlsv1.2');
+ ok(run(test([@ssltest, "-dtls12", "-server_auth", @CA, @extra])),
+ 'test dtlsv1.2 with server authentication');
+ ok(run(test([@ssltest, "-dtls12", "-client_auth", @CA, @extra])),
+ 'test dtlsv1.2 with client authentication');
+ ok(run(test([@ssltest, "-dtls12", "-server_auth", "-client_auth", @CA, @extra])),
+ 'test dtlsv1.2 with both server and client authentication');
+ }
+
+ SKIP: {
+ skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 6
+ if $no_anytls;
+
+ SKIP: {
+ skip "skipping test of sslv2/sslv3 w/o (EC)DHE test", 1 if $dsa_cert;
+
+ ok(run(test([@ssltest, "-bio_pair", "-no_dhe", "-no_ecdhe", @extra])),
+ 'test sslv2/sslv3 w/o (EC)DHE via BIO pair');
+ }
+
+ ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v", @extra])),
+ 'test sslv2/sslv3 with 1024bit DHE via BIO pair');
+ ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA, @extra])),
+ 'test sslv2/sslv3 with server authentication');
+ ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA, @extra])),
+ 'test sslv2/sslv3 with client authentication via BIO pair');
+ ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA, @extra])),
+ 'test sslv2/sslv3 with both client and server authentication via BIO pair');
+ ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA, @extra])),
+ 'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
}
- ok(run(test([@ssltest, "-bio_pair", "-dhe1024dsa", "-v", @extra])),
- 'test sslv2/sslv3 with 1024bit DHE via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-server_auth", @CA, @extra])),
- 'test sslv2/sslv3 with server authentication');
- ok(run(test([@ssltest, "-bio_pair", "-client_auth", @CA, @extra])),
- 'test sslv2/sslv3 with client authentication via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", @CA, @extra])),
- 'test sslv2/sslv3 with both client and server authentication via BIO pair');
- ok(run(test([@ssltest, "-bio_pair", "-server_auth", "-client_auth", "-app_verify", @CA, @extra])),
- 'test sslv2/sslv3 with both client and server authentication via BIO pair and app verify');
};
subtest "Testing ciphersuites" => sub {
- my $no_dh = run(app(["openssl", "no-dhparam"], stdout => undef));
- my $no_ec = run(app(["openssl", "no-ec"], stdout => undef));
-
- my @protocols = ("TLSv1.2", "SSLv3");
+ my @exkeys = ();
+ my $ciphers = "-EXP:-PSK:-SRP:-kDH:-kECDHe";
+
+ if ($no_dh) {
+ note "skipping DHE tests\n";
+ $ciphers .= ":-kDHE";
+ }
+ if ($no_dsa) {
+ note "skipping DSA tests\n";
+ $ciphers .= ":-aDSA";
+ } else {
+ push @exkeys, "-s_cert", "certD.ss", "-s_key", "keyD.ss";
+ }
+
+ if ($no_ec) {
+ note "skipping EC tests\n";
+ $ciphers .= ":!aECDSA:!kECDH";
+ } else {
+ push @exkeys, "-s_cert", "certE.ss", "-s_key", "keyE.ss";
+ }
+
+ my @protocols = ();
+ # FIXME: I feel unsure about the following line, is that really just TLSv1.2, or is it all of the SSLv3/TLS protocols?
+ push(@protocols, "TLSv1.2") unless $no_tls1_2;
+ push(@protocols, "SSLv3") unless $no_ssl3;
my $protocolciphersuitcount = 0;
my %ciphersuites =
map { my @c =
map { split(/:/, $_) }
- map { run(app(["openssl",
- "ciphers", "$_"]),
- capture => 1);
- }
- ( "RSA+$_",
- $no_dh ? () : "EDH+aRSA+$_:-EXP",
- $no_ec ? () : "EECDH+aRSA+$_:-EXP" );
- chomp @c;
+ run(app(["openssl", "ciphers", "${_}:$ciphers"]),
+ capture => 1);
+ map { s/\R//; } @c; # chomp @c;
$protocolciphersuitcount += scalar @c;
$_ => [ @c ] } @protocols;
- plan tests => $protocolciphersuitcount + ($no_dh ? 0 : 2);
+ # The count of protocols is because in addition to the ciphersuits
+ # we got above, we're running a weak DH test for each protocol
+ plan tests => $protocolciphersuitcount + scalar(@protocols);
foreach my $protocol (@protocols) {
note "Testing ciphersuites for $protocol";
foreach my $cipher (@{$ciphersuites{$protocol}}) {
- ok(run(test([@ssltest, "-cipher", $cipher,
+ ok(run(test([@ssltest, @exkeys, "-cipher", $cipher,
$protocol eq "SSLv3" ? ("-ssl3") : ()])),
"Testing $cipher");
}
- if (!$no_dh) {
- is(run(test([@ssltest,
- "-s_cipher", "EDH",
- "-c_cipher", 'EDH:@SECLEVEL=1',
- "-dhe512",
- $protocol eq "SSLv3" ? ("-ssl3") : ()])), 0,
- "testing connection with weak DH, expecting failure");
- }
+ is(run(test([@ssltest,
+ "-s_cipher", "EDH",
+ "-c_cipher", 'EDH:@SECLEVEL=1',
+ "-dhe512",
+ $protocol eq "SSLv3" ? ("-ssl3") : ()])), 0,
+ "testing connection with weak DH, expecting failure");
}
};
plan tests => 5;
- {
- SKIP: {
- skip "skipping anonymous DH tests", 1
- if (run(app(["openssl", "no-dhparam"], stdout => undef)));
+ SKIP: {
+ skip "TLSv1.0 is not supported by this OpenSSL build", 5
+ if $no_tls1;
- ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
- 'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
- }
- }
+ SKIP: {
+ skip "skipping anonymous DH tests", 1
+ if ($no_dh);
- {
- SKIP: {
- skip "skipping RSA tests", 2
- if (run(app(["openssl", "no-rsa"], stdout => undef)));
+ ok(run(test([@ssltest, "-v", "-bio_pair", "-tls1", "-cipher", "ADH", "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
+ 'test tlsv1 with 1024bit anonymous DH, multiple handshakes');
+ }
- ok(run(test(["ssltest", "-v", "-bio_pair", "-tls1", "-cert", top_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time", @extra])),
- 'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
+ SKIP: {
+ skip "skipping RSA tests", 2
+ if $no_rsa;
- skip "skipping RSA+DHE tests", 1
- if (run(app(["openssl", "no-dhparam"], stdout => undef)));
+ ok(run(test(["ssltest", "-v", "-bio_pair", "-tls1", "-s_cert", top_file("apps","server2.pem"), "-no_dhe", "-no_ecdhe", "-num", "10", "-f", "-time", @extra])),
+ 'test tlsv1 with 1024bit RSA, no (EC)DHE, multiple handshakes');
- ok(run(test(["ssltest", "-v", "-bio_pair", "-tls1", "-cert", top_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
- 'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
- }
+ skip "skipping RSA+DHE tests", 1
+ if $no_dh;
+
+ ok(run(test(["ssltest", "-v", "-bio_pair", "-tls1", "-s_cert", top_file("apps","server2.pem"), "-dhe1024dsa", "-num", "10", "-f", "-time", @extra])),
+ 'test tlsv1 with 1024bit RSA, 1024bit DHE, multiple handshakes');
+ }
+
+ SKIP: {
+ skip "skipping PSK tests", 2
+ if ($no_psk);
+
+ ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
+ 'test tls1 with PSK');
+
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
+ 'test tls1 with PSK via BIO pair');
+ }
}
- ok(run(test([@ssltest, "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
- 'test tls1 with PSK');
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "PSK", "-psk", "abc123", @extra])),
- 'test tls1 with PSK via BIO pair');
};
subtest 'Next Protocol Negotiation Tests' => sub {
plan tests => 7;
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server_reject"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server_reject"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2", "-reuse"])));
+ SKIP: {
+ skip "TLSv1.0 is not supported by this OpenSSL build", 7
+ if $no_tls1;
+
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_server_reject"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server_reject"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-npn_client", "-npn_server", "-num", "2", "-reuse"])));
+ }
};
subtest 'Custom Extension tests' => sub {
plan tests => 1;
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
- 'test tls1 with custom extensions');
+ SKIP: {
+ skip "TLSv1.0 is not supported by this OpenSSL build", 7
+ if $no_tls1;
+
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext"])),
+ 'test tls1 with custom extensions');
+ }
};
subtest 'Serverinfo tests' => sub {
plan tests => 5;
- note('echo test tls1 with serverinfo');
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
+ SKIP: {
+ skip "TLSv1.0 is not supported by this OpenSSL build", 5
+ if $no_tls1;
+
+ note('echo test tls1 with serverinfo');
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_tack"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-custom_ext", "-serverinfo_file", $serverinfo, "-serverinfo_sct", "-serverinfo_tack"])));
+ }
};
subtest 'ALPN tests' => sub {
plan tests => 12;
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "bar"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "foo", "-alpn_expected", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo,bar", "-alpn_expected", "foo"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "baz", "-alpn_server", "bar,foo"])));
+ SKIP: {
+ skip "TLSv1.0 is not supported by this OpenSSL build", 12
+ if $no_tls1;
+
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "bar"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "foo", "-alpn_expected", "foo"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo", "-alpn_expected", "foo"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "foo,bar", "-alpn_expected", "foo"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "bar,foo", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "foo,bar", "-alpn_server", "bar,foo", "-alpn_expected", "bar"])));
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-alpn_client", "baz", "-alpn_server", "bar,foo"])));
- {
- SKIP: {
- skip "skipping SRP tests", 4
- if run(app(["openssl", "no-srp"], stdout => undef));
+ SKIP: {
+ skip "skipping SRP tests", 4
+ if $no_srp;
- ok(run(test([@ssltest, "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
- 'test tls1 with SRP');
+ ok(run(test([@ssltest, "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
+ 'test tls1 with SRP');
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
- 'test tls1 with SRP via BIO pair');
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "SRP", "-srpuser", "test", "-srppass", "abc123"])),
+ 'test tls1 with SRP via BIO pair');
- ok(run(test([@ssltest, "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
+ ok(run(test([@ssltest, "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
'test tls1 with SRP auth');
- ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
- 'test tls1 with SRP auth via BIO pair');
- }
+ ok(run(test([@ssltest, "-bio_pair", "-tls1", "-cipher", "aSRP", "-srpuser", "test", "-srppass", "abc123"])),
+ 'test tls1 with SRP auth via BIO pair');
+ }
}
};
plan tests => 2;
- {
- SKIP: {
- skip "skipping multi-buffer tests", 2
- if @extra || (POSIX::uname())[4] ne "x86_64";
- ok(run(test([@ssltest, "-cipher", "AES128-SHA", "-bytes", "8m"])));
- ok(run(test([@ssltest, "-cipher", "AES128-SHA256", "-bytes", "8m"])));
- }
+ SKIP: {
+ skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", 2
+ if $no_anytls;
+
+ skip "skipping multi-buffer tests", 2
+ if @extra || (POSIX::uname())[4] ne "x86_64";
+
+ ok(run(test([@ssltest, "-cipher", "AES128-SHA", "-bytes", "8m"])));
+
+ # We happen to know that AES128-SHA256 is TLSv1.2 only... for now.
+ skip "TLSv1.2 is not supported by this OpenSSL configuration", 1
+ if $no_tls1_2;
+
+ ok(run(test([@ssltest, "-cipher", "AES128-SHA256", "-bytes", "8m"])));
}
};
+
+ subtest 'TLS Version min/max tests' => sub {
+ my @protos;
+ push(@protos, "ssl3") unless $no_ssl3;
+ push(@protos, "tls1") unless $no_tls1;
+ push(@protos, "tls1.1") unless $no_tls1_1;
+ push(@protos, "tls1.2") unless $no_tls1_2;
+ my @minprotos = (undef, @protos);
+ my @maxprotos = (@protos, undef);
+ my @shdprotos = (@protos, $protos[$#protos]);
+ my $n = ((@protos+2) * (@protos+3))/2 - 2;
+ my $ntests = $n * $n;
+ plan tests => $ntests;
+ SKIP: {
+ skip "TLS disabled", 1 if $ntests == 1;
+
+ my $should;
+ for (my $smin = 0; $smin < @minprotos; ++$smin) {
+ for (my $smax = $smin ? $smin - 1 : 0; $smax < @maxprotos; ++$smax) {
+ for (my $cmin = 0; $cmin < @minprotos; ++$cmin) {
+ for (my $cmax = $cmin ? $cmin - 1 : 0; $cmax < @maxprotos; ++$cmax) {
+ if ($cmax < $smin-1) {
+ $should = "fail-server";
+ } elsif ($smax < $cmin-1) {
+ $should = "fail-client";
+ } elsif ($cmax > $smax) {
+ $should = $shdprotos[$smax];
+ } else {
+ $should = $shdprotos[$cmax];
+ }
+
+ my @args = @ssltest;
+ push(@args, "-should_negotiate", $should);
+ push(@args, "-server_min_proto", $minprotos[$smin])
+ if (defined($minprotos[$smin]));
+ push(@args, "-server_max_proto", $maxprotos[$smax])
+ if (defined($maxprotos[$smax]));
+ push(@args, "-client_min_proto", $minprotos[$cmin])
+ if (defined($minprotos[$cmin]));
+ push(@args, "-client_max_proto", $maxprotos[$cmax])
+ if (defined($maxprotos[$cmax]));
+ my $ok = run(test[@args]);
+ if (! $ok) {
+ print STDERR "\nsmin=$smin, smax=$smax, cmin=$cmin, cmax=$cmax\n";
+ print STDERR "\nFailed: @args\n";
+ }
+ ok($ok);
+ }}}}}
+ };
+
+ subtest 'DTLS Version min/max tests' => sub {
+ my @protos;
+ push(@protos, "dtls1") unless ($no_dtls1 || $no_dtls);
+ push(@protos, "dtls1.2") unless ($no_dtls1_2 || $no_dtls);
+ my @minprotos = (undef, @protos);
+ my @maxprotos = (@protos, undef);
+ my @shdprotos = (@protos, $protos[$#protos]);
+ my $n = ((@protos+2) * (@protos+3))/2 - 2;
+ my $ntests = $n * $n;
+ plan tests => $ntests;
+ SKIP: {
+ skip "DTLS disabled", 1 if $ntests == 1;
+
+ my $should;
+ for (my $smin = 0; $smin < @minprotos; ++$smin) {
+ for (my $smax = $smin ? $smin - 1 : 0; $smax < @maxprotos; ++$smax) {
+ for (my $cmin = 0; $cmin < @minprotos; ++$cmin) {
+ for (my $cmax = $cmin ? $cmin - 1 : 0; $cmax < @maxprotos; ++$cmax) {
+ if ($cmax < $smin-1) {
+ $should = "fail-server";
+ } elsif ($smax < $cmin-1) {
+ $should = "fail-client";
+ } elsif ($cmax > $smax) {
+ $should = $shdprotos[$smax];
+ } else {
+ $should = $shdprotos[$cmax];
+ }
+
+ my @args = (@ssltest, "-dtls");
+ push(@args, "-should_negotiate", $should);
+ push(@args, "-server_min_proto", $minprotos[$smin])
+ if (defined($minprotos[$smin]));
+ push(@args, "-server_max_proto", $maxprotos[$smax])
+ if (defined($maxprotos[$smax]));
+ push(@args, "-client_min_proto", $minprotos[$cmin])
+ if (defined($minprotos[$cmin]));
+ push(@args, "-client_max_proto", $maxprotos[$cmax])
+ if (defined($maxprotos[$cmax]));
+ my $ok = run(test[@args]);
+ if (! $ok) {
+ print STDERR "\nsmin=$smin, smax=$smax, cmin=$cmin, cmax=$cmax\n";
+ print STDERR "\nFailed: @args\n";
+ }
+ ok($ok);
+ }}}}}
+ };
}
sub testsslproxy {
- my ($a1, $a2, $a3, @rest) = @_;
+ my $key = shift || top_file("apps","server.pem");
+ my $cert = shift || top_file("apps","server.pem");
+ my $CAtmp = shift;
+ my @CA = $CAtmp ? ("-CAfile", $CAtmp) : ("-CApath", top_dir("certs"));
+ my @extra = @_;
+
+ my @ssltest = ("ssltest",
+ "-s_key", $key, "-s_cert", $cert,
+ "-c_key", $key, "-c_cert", $cert);
# plan tests => 16;
note('Testing a lot of proxy conditions.');
- note('Some of them may turn out being invalid, which is fine.');
- foreach my $auth (('A', 'B', 'C', 'BC')) {
- foreach my $cond (('A', 'B', 'C', 'A|B&!C')) {
- # Exit code 3 is when ssltest couldn't parse the condition
- with({ exit_checker => sub { return shift == 3 ? 0 : 1; } },
- sub {
- testssl($a1, $a2, $a3,
- "-proxy", "-proxy_auth", $auth,
- "-proxy_cond", $cond);
- });
- }
+
+ # We happen to know that certP1.ss has policy letters "AB" and
+ # certP2.ss has policy letters "BC". However, because certP2.ss
+ # has certP1.ss as issuer, when it's used, both their policy
+ # letters get combined into just "B".
+ # The policy letter(s) then get filtered with the given auth letter
+ # in the table below, and the result gets tested with the given
+ # condition. For details, read ssltest.c
+ #
+ # certfilename => [ [ auth, cond, expected result ] ... ]
+ my %expected = ( "certP1.ss" => [ [ [ 'A', 'A' ], 1 ],
+ [ [ 'A', 'B' ], 0 ],
+ [ [ 'A', 'C' ], 0 ],
+ [ [ 'A', 'A|B&!C' ], 1 ],
+ [ [ 'B', 'A' ], 0 ],
+ [ [ 'B', 'B' ], 1 ],
+ [ [ 'B', 'C' ], 0 ],
+ [ [ 'B', 'A|B&!C' ], 1 ],
+ [ [ 'C', 'A' ], 0 ],
+ [ [ 'C', 'B' ], 0 ],
+ [ [ 'C', 'C' ], 0 ],
+ [ [ 'C', 'A|B&!C' ], 0 ],
+ [ [ 'BC', 'A' ], 0 ],
+ [ [ 'BC', 'B' ], 1 ],
+ [ [ 'BC', 'C' ], 0 ],
+ [ [ 'BC', 'A|B&!C' ], 1 ] ],
+ "certP2.ss" => [ [ [ 'A', 'A' ], 0 ],
+ [ [ 'A', 'B' ], 0 ],
+ [ [ 'A', 'C' ], 0 ],
+ [ [ 'A', 'A|B&!C' ], 0 ],
+ [ [ 'B', 'A' ], 0 ],
+ [ [ 'B', 'B' ], 1 ],
+ [ [ 'B', 'C' ], 0 ],
+ [ [ 'B', 'A|B&!C' ], 1 ],
+ [ [ 'C', 'A' ], 0 ],
+ [ [ 'C', 'B' ], 0 ],
+ [ [ 'C', 'C' ], 0 ],
+ [ [ 'C', 'A|B&!C' ], 0 ],
+ [ [ 'BC', 'A' ], 0 ],
+ [ [ 'BC', 'B' ], 1 ],
+ [ [ 'BC', 'C' ], 0 ],
+ [ [ 'BC', 'A|B&!C' ], 1 ] ] );
+
+ SKIP: {
+ skip "Neither SSLv3 nor any TLS version are supported by this OpenSSL build", scalar(@{$expected{$cert}})
+ if $no_anytls;
+
+ foreach (@{$expected{$cert}}) {
+ my $auth = $_->[0]->[0];
+ my $cond = $_->[0]->[1];
+ my $res = $_->[1];
+ is(run(test([@ssltest, "-server_auth", @CA,
+ "-proxy", "-proxy_auth", $auth,
+ "-proxy_cond", $cond])), $res,
+ "test tlsv1, server auth, proxy auth $auth and cond $cond (expect "
+ .($res ? "success" : "failure").")");
+ }
}
}