#! /usr/bin/env perl
-# Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
+# Copyright 2015-2018 The OpenSSL Project Authors. All Rights Reserved.
#
-# Licensed under the OpenSSL license (the "License"). You may not use
+# Licensed under the Apache License 2.0 (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
setup($test_name);
plan skip_all => "TLSProxy isn't usable on $^O"
- if $^O =~ /^(VMS|MSWin32)$/;
+ if $^O =~ /^(VMS)$/;
plan skip_all => "$test_name needs the dynamic engine feature enabled"
if disabled("engine") || disabled("dynamic-engine");
if disabled("sock");
plan skip_all => "$test_name needs TLS enabled"
- if alldisabled(available_protocols("tls"));
+ if alldisabled(available_protocols("tls"))
+ || (!disabled("tls1_3") && disabled("tls1_2"));
$ENV{OPENSSL_ia32cap} = '~0x200000200000000';
$ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf");
[TLSProxy::Message::MT_CERTIFICATE,
checkhandshake::ALL_HANDSHAKES
& ~checkhandshake::RESUME_HANDSHAKE],
+ (disabled("ec") ? () :
+ [TLSProxy::Message::MT_SERVER_KEY_EXCHANGE,
+ checkhandshake::EC_HANDSHAKE]),
[TLSProxy::Message::MT_CERTIFICATE_STATUS,
checkhandshake::OCSP_HANDSHAKE],
#ServerKeyExchange handshakes not currently supported by TLSProxy
checkhandshake::SERVER_NAME_CLI_EXTENSION],
[TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_STATUS_REQUEST,
checkhandshake::STATUS_REQUEST_CLI_EXTENSION],
- [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_GROUPS,
- checkhandshake::DEFAULT_EXTENSIONS],
- [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_EC_POINT_FORMATS,
- checkhandshake::DEFAULT_EXTENSIONS],
- [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SIG_ALGS,
- checkhandshake::DEFAULT_EXTENSIONS],
+ (disabled("ec") ? () :
+ [TLSProxy::Message::MT_CLIENT_HELLO,
+ TLSProxy::Message::EXT_SUPPORTED_GROUPS,
+ checkhandshake::DEFAULT_EXTENSIONS]),
+ (disabled("ec") ? () :
+ [TLSProxy::Message::MT_CLIENT_HELLO,
+ TLSProxy::Message::EXT_EC_POINT_FORMATS,
+ checkhandshake::DEFAULT_EXTENSIONS]),
+ (disabled("tls1_2") ? () :
+ [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SIG_ALGS,
+ checkhandshake::DEFAULT_EXTENSIONS]),
[TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ALPN,
checkhandshake::ALPN_CLI_EXTENSION],
[TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SCT,
checkhandshake::SCT_SRV_EXTENSION],
[TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_NPN,
checkhandshake::NPN_SRV_EXTENSION],
+ [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_EC_POINT_FORMATS,
+ checkhandshake::EC_POINT_FORMAT_SRV_EXTENSION],
[0,0,0]
);
$proxy->serverconnects(2);
$proxy->clientflags("-no_tls1_3 -sess_out ".$session);
$proxy->start() or plan skip_all => "Unable to start up Proxy for tests";
-plan tests => 20;
+plan tests => 21;
checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
checkhandshake::DEFAULT_EXTENSIONS,
"Default handshake test");
"Resumption handshake test");
unlink $session;
-#Test 3: A status_request handshake (client request only)
-$proxy->clear();
-$proxy->clientflags("-no_tls1_3 -status");
-$proxy->start();
-checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
- checkhandshake::DEFAULT_EXTENSIONS
- | checkhandshake::STATUS_REQUEST_CLI_EXTENSION,
- "status_request handshake test (client)");
-
-#Test 4: A status_request handshake (server support only)
-$proxy->clear();
-$proxy->clientflags("-no_tls1_3");
-$proxy->serverflags("-status_file "
- .srctop_file("test", "recipes", "ocsp-response.der"));
-$proxy->start();
-checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
- checkhandshake::DEFAULT_EXTENSIONS,
- "status_request handshake test (server)");
-
-#Test 5: A status_request handshake (client and server)
-$proxy->clear();
-$proxy->clientflags("-no_tls1_3 -status");
-$proxy->serverflags("-status_file "
- .srctop_file("test", "recipes", "ocsp-response.der"));
-$proxy->start();
-checkhandshake($proxy, checkhandshake::OCSP_HANDSHAKE,
- checkhandshake::DEFAULT_EXTENSIONS
- | checkhandshake::STATUS_REQUEST_CLI_EXTENSION
- | checkhandshake::STATUS_REQUEST_SRV_EXTENSION,
- "status_request handshake test");
+SKIP: {
+ skip "No OCSP support in this OpenSSL build", 3
+ if disabled("ocsp");
+
+ #Test 3: A status_request handshake (client request only)
+ $proxy->clear();
+ $proxy->clientflags("-no_tls1_3 -status");
+ $proxy->start();
+ checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
+ checkhandshake::DEFAULT_EXTENSIONS
+ | checkhandshake::STATUS_REQUEST_CLI_EXTENSION,
+ "status_request handshake test (client)");
+
+ #Test 4: A status_request handshake (server support only)
+ $proxy->clear();
+ $proxy->clientflags("-no_tls1_3");
+ $proxy->serverflags("-status_file "
+ .srctop_file("test", "recipes", "ocsp-response.der"));
+ $proxy->start();
+ checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
+ checkhandshake::DEFAULT_EXTENSIONS,
+ "status_request handshake test (server)");
+
+ #Test 5: A status_request handshake (client and server)
+ $proxy->clear();
+ $proxy->clientflags("-no_tls1_3 -status");
+ $proxy->serverflags("-status_file "
+ .srctop_file("test", "recipes", "ocsp-response.der"));
+ $proxy->start();
+ checkhandshake($proxy, checkhandshake::OCSP_HANDSHAKE,
+ checkhandshake::DEFAULT_EXTENSIONS
+ | checkhandshake::STATUS_REQUEST_CLI_EXTENSION
+ | checkhandshake::STATUS_REQUEST_SRV_EXTENSION,
+ "status_request handshake test");
+}
#Test 6: A client auth handshake
$proxy->clear();
$proxy->start();
checkhandshake($proxy, checkhandshake::RENEG_HANDSHAKE,
checkhandshake::DEFAULT_EXTENSIONS,
- "Rengotiation handshake test");
+ "Renegotiation handshake test");
-#Test 8: Server name handshake (client request only)
+#Test 8: Server name handshake (no client request)
$proxy->clear();
-$proxy->clientflags("-no_tls1_3 -servername testhost");
+$proxy->clientflags("-no_tls1_3 -noservername");
$proxy->start();
checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
checkhandshake::DEFAULT_EXTENSIONS
- | checkhandshake::SERVER_NAME_CLI_EXTENSION,
- "Server name handshake test (client)");
+ & ~checkhandshake::SERVER_NAME_CLI_EXTENSION,
+ "Server name handshake test (client)");
#Test 9: Server name handshake (server support only)
$proxy->clear();
-$proxy->clientflags("-no_tls1_3");
+$proxy->clientflags("-no_tls1_3 -noservername");
$proxy->serverflags("-servername testhost");
$proxy->start();
checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
- checkhandshake::DEFAULT_EXTENSIONS,
- "Server name handshake test (server)");
+ checkhandshake::DEFAULT_EXTENSIONS
+ & ~checkhandshake::SERVER_NAME_CLI_EXTENSION,
+ "Server name handshake test (server)");
#Test 10: Server name handshake (client and server)
$proxy->clear();
$proxy->serverflags("-servername testhost");
$proxy->start();
checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
- checkhandshake::DEFAULT_EXTENSIONS
- | checkhandshake::SERVER_NAME_CLI_EXTENSION
- | checkhandshake::SERVER_NAME_SRV_EXTENSION,
- "Server name handshake test");
+ checkhandshake::DEFAULT_EXTENSIONS
+ | checkhandshake::SERVER_NAME_SRV_EXTENSION,
+ "Server name handshake test");
#Test 11: ALPN handshake (client request only)
$proxy->clear();
checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
checkhandshake::DEFAULT_EXTENSIONS
| checkhandshake::ALPN_CLI_EXTENSION,
- "ALPN handshake test (client)");
+ "ALPN handshake test (client)");
#Test 12: ALPN handshake (server support only)
$proxy->clear();
$proxy->start();
checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
checkhandshake::DEFAULT_EXTENSIONS,
- "ALPN handshake test (server)");
+ "ALPN handshake test (server)");
#Test 13: ALPN handshake (client and server)
$proxy->clear();
$proxy->clientflags("-no_tls1_3 -alpn test");
$proxy->serverflags("-alpn test");
$proxy->start();
-checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
- checkhandshake::DEFAULT_EXTENSIONS
- | checkhandshake::ALPN_CLI_EXTENSION
- | checkhandshake::ALPN_SRV_EXTENSION,
- "ALPN handshake test");
-
-#Test 14: SCT handshake (client request only)
-$proxy->clear();
-#Note: -ct also sends status_request
-$proxy->clientflags("-no_tls1_3 -ct");
-$proxy->serverflags("-status_file "
- .srctop_file("test", "recipes", "ocsp-response.der"));
-$proxy->start();
-checkhandshake($proxy, checkhandshake::OCSP_HANDSHAKE,
- checkhandshake::DEFAULT_EXTENSIONS
- | checkhandshake::SCT_CLI_EXTENSION
- | checkhandshake::STATUS_REQUEST_CLI_EXTENSION
- | checkhandshake::STATUS_REQUEST_SRV_EXTENSION,
- "SCT handshake test (client)");
-
-#Test 15: SCT handshake (server support only)
-$proxy->clear();
-#Note: -ct also sends status_request
-$proxy->clientflags("-no_tls1_3");
-$proxy->serverflags("-status_file "
- .srctop_file("test", "recipes", "ocsp-response.der"));
-$proxy->start();
-checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
- checkhandshake::DEFAULT_EXTENSIONS,
- "SCT handshake test (server)");
-
-#Test 16: SCT handshake (client and server)
-#There is no built-in server side support for this so we are actually also
-#testing custom extensions here
-$proxy->clear();
-#Note: -ct also sends status_request
-$proxy->clientflags("-no_tls1_3 -ct");
-$proxy->serverflags("-status_file "
- .srctop_file("test", "recipes", "ocsp-response.der")
- ." -serverinfo ".srctop_file("test", "serverinfo.pem"));
-$proxy->start();
-checkhandshake($proxy, checkhandshake::OCSP_HANDSHAKE,
- checkhandshake::DEFAULT_EXTENSIONS
- | checkhandshake::SCT_CLI_EXTENSION
- | checkhandshake::SCT_SRV_EXTENSION
- | checkhandshake::STATUS_REQUEST_CLI_EXTENSION
- | checkhandshake::STATUS_REQUEST_SRV_EXTENSION,
- "SCT handshake test");
-
-
-#Test 17: NPN handshake (client request only)
-$proxy->clear();
-$proxy->clientflags("-no_tls1_3 -nextprotoneg test");
-$proxy->start();
checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
checkhandshake::DEFAULT_EXTENSIONS
- | checkhandshake::NPN_CLI_EXTENSION,
- "NPN handshake test (client)");
-
-#Test 18: NPN handshake (server support only)
-$proxy->clear();
-$proxy->clientflags("-no_tls1_3");
-$proxy->serverflags("-nextprotoneg test");
-$proxy->start();
-checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
- checkhandshake::DEFAULT_EXTENSIONS,
- "NPN handshake test (server)");
-
-#Test 19: NPN handshake (client and server)
-$proxy->clear();
-$proxy->clientflags("-no_tls1_3 -nextprotoneg test");
-$proxy->serverflags("-nextprotoneg test");
-$proxy->start();
-checkhandshake($proxy, checkhandshake::NPN_HANDSHAKE,
- checkhandshake::DEFAULT_EXTENSIONS
- | checkhandshake::NPN_CLI_EXTENSION
- | checkhandshake::NPN_SRV_EXTENSION,
- "NPN handshake test");
-
-#Test 20: SRP extension
-#Note: We are not actually going to perform an SRP handshake (TLSProxy does not
-#support it). However it is sufficient for us to check that the SRP extension
-#gets added on the client side. There is no SRP extension generated on the
-#server side anyway.
-$proxy->clear();
-$proxy->clientflags("-no_tls1_3 -srpuser user -srppass pass:pass");
-$proxy->start();
-checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
- checkhandshake::DEFAULT_EXTENSIONS
- | checkhandshake::SRP_CLI_EXTENSION,
- "SRP extension test");
+ | checkhandshake::ALPN_CLI_EXTENSION
+ | checkhandshake::ALPN_SRV_EXTENSION,
+ "ALPN handshake test");
+
+SKIP: {
+ skip "No CT, EC or OCSP support in this OpenSSL build", 1
+ if disabled("ct") || disabled("ec") || disabled("ocsp");
+
+ #Test 14: SCT handshake (client request only)
+ $proxy->clear();
+ #Note: -ct also sends status_request
+ $proxy->clientflags("-no_tls1_3 -ct");
+ $proxy->serverflags("-status_file "
+ .srctop_file("test", "recipes", "ocsp-response.der"));
+ $proxy->start();
+ checkhandshake($proxy, checkhandshake::OCSP_HANDSHAKE,
+ checkhandshake::DEFAULT_EXTENSIONS
+ | checkhandshake::SCT_CLI_EXTENSION
+ | checkhandshake::STATUS_REQUEST_CLI_EXTENSION
+ | checkhandshake::STATUS_REQUEST_SRV_EXTENSION,
+ "SCT handshake test (client)");
+}
+
+SKIP: {
+ skip "No OCSP support in this OpenSSL build", 1
+ if disabled("ocsp");
+
+ #Test 15: SCT handshake (server support only)
+ $proxy->clear();
+ #Note: -ct also sends status_request
+ $proxy->clientflags("-no_tls1_3");
+ $proxy->serverflags("-status_file "
+ .srctop_file("test", "recipes", "ocsp-response.der"));
+ $proxy->start();
+ checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
+ checkhandshake::DEFAULT_EXTENSIONS,
+ "SCT handshake test (server)");
+}
+
+SKIP: {
+ skip "No CT, EC or OCSP support in this OpenSSL build", 1
+ if disabled("ct") || disabled("ec") || disabled("ocsp");
+
+ #Test 16: SCT handshake (client and server)
+ #There is no built-in server side support for this so we are actually also
+ #testing custom extensions here
+ $proxy->clear();
+ #Note: -ct also sends status_request
+ $proxy->clientflags("-no_tls1_3 -ct");
+ $proxy->serverflags("-status_file "
+ .srctop_file("test", "recipes", "ocsp-response.der")
+ ." -serverinfo ".srctop_file("test", "serverinfo.pem"));
+ $proxy->start();
+ checkhandshake($proxy, checkhandshake::OCSP_HANDSHAKE,
+ checkhandshake::DEFAULT_EXTENSIONS
+ | checkhandshake::SCT_CLI_EXTENSION
+ | checkhandshake::SCT_SRV_EXTENSION
+ | checkhandshake::STATUS_REQUEST_CLI_EXTENSION
+ | checkhandshake::STATUS_REQUEST_SRV_EXTENSION,
+ "SCT handshake test");
+}
+
+
+SKIP: {
+ skip "No NPN support in this OpenSSL build", 3
+ if disabled("nextprotoneg");
+
+ #Test 17: NPN handshake (client request only)
+ $proxy->clear();
+ $proxy->clientflags("-no_tls1_3 -nextprotoneg test");
+ $proxy->start();
+ checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
+ checkhandshake::DEFAULT_EXTENSIONS
+ | checkhandshake::NPN_CLI_EXTENSION,
+ "NPN handshake test (client)");
+
+ #Test 18: NPN handshake (server support only)
+ $proxy->clear();
+ $proxy->clientflags("-no_tls1_3");
+ $proxy->serverflags("-nextprotoneg test");
+ $proxy->start();
+ checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
+ checkhandshake::DEFAULT_EXTENSIONS,
+ "NPN handshake test (server)");
+
+ #Test 19: NPN handshake (client and server)
+ $proxy->clear();
+ $proxy->clientflags("-no_tls1_3 -nextprotoneg test");
+ $proxy->serverflags("-nextprotoneg test");
+ $proxy->start();
+ checkhandshake($proxy, checkhandshake::NPN_HANDSHAKE,
+ checkhandshake::DEFAULT_EXTENSIONS
+ | checkhandshake::NPN_CLI_EXTENSION
+ | checkhandshake::NPN_SRV_EXTENSION,
+ "NPN handshake test");
+}
+
+SKIP: {
+ skip "No SRP support in this OpenSSL build", 1
+ if disabled("srp");
+
+ #Test 20: SRP extension
+ #Note: We are not actually going to perform an SRP handshake (TLSProxy
+ #does not support it). However it is sufficient for us to check that the
+ #SRP extension gets added on the client side. There is no SRP extension
+ #generated on the server side anyway.
+ $proxy->clear();
+ $proxy->clientflags("-no_tls1_3 -srpuser user -srppass pass:pass");
+ $proxy->start();
+ checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE,
+ checkhandshake::DEFAULT_EXTENSIONS
+ | checkhandshake::SRP_CLI_EXTENSION,
+ "SRP extension test");
+}
+
+#Test 21: EC handshake
+SKIP: {
+ skip "No EC support in this OpenSSL build", 1 if disabled("ec");
+ $proxy->clear();
+ $proxy->clientflags("-no_tls1_3");
+ $proxy->serverflags("-no_tls1_3");
+ $proxy->ciphers("ECDHE-RSA-AES128-SHA");
+ $proxy->start();
+ checkhandshake($proxy, checkhandshake::EC_HANDSHAKE,
+ checkhandshake::DEFAULT_EXTENSIONS
+ | checkhandshake::EC_POINT_FORMAT_SRV_EXTENSION,
+ "EC handshake test");
+}