Fix test_sslextension if TLSv1.2 has been disabled
[openssl.git] / test / recipes / 70-test_sslextension.t
old mode 100755 (executable)
new mode 100644 (file)
index a39320b..f60e352
@@ -1,12 +1,14 @@
 #! /usr/bin/env perl
-# Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
+# Copyright 2015-2018 The OpenSSL Project Authors. All Rights Reserved.
 #
-# Licensed under the OpenSSL license (the "License").  You may not use
+# Licensed under the Apache License 2.0 (the "License").  You may not use
 # this file except in compliance with the License.  You can obtain a copy
 # in the file LICENSE in the source distribution or at
 # https://www.openssl.org/source/license.html
 
 use strict;
+use feature 'state';
+
 use OpenSSL::Test qw/:DEFAULT cmdstr srctop_file bldtop_dir/;
 use OpenSSL::Test::Utils;
 use TLSProxy::Proxy;
@@ -15,7 +17,7 @@ my $test_name = "test_sslextension";
 setup($test_name);
 
 plan skip_all => "TLSProxy isn't usable on $^O"
-    if $^O =~ /^(VMS|MSWin32)$/;
+    if $^O =~ /^(VMS)$/;
 
 plan skip_all => "$test_name needs the dynamic engine feature enabled"
     if disabled("engine") || disabled("dynamic-engine");
@@ -23,24 +25,44 @@ plan skip_all => "$test_name needs the dynamic engine feature enabled"
 plan skip_all => "$test_name needs the sock feature enabled"
     if disabled("sock");
 
+plan skip_all => "$test_name needs TLS enabled"
+    if alldisabled(available_protocols("tls"));
+
+my $no_below_tls13 = alldisabled(("tls1", "tls1_1", "tls1_2"))
+                     || (!disabled("tls1_3") && disabled("tls1_2"));
+
+use constant {
+    UNSOLICITED_SERVER_NAME => 0,
+    UNSOLICITED_SERVER_NAME_TLS13 => 1,
+    UNSOLICITED_SCT => 2,
+    NONCOMPLIANT_SUPPORTED_GROUPS => 3
+};
+
+my $testtype;
+my $fatal_alert = 0;    # set by filter on fatal alert
+
 $ENV{OPENSSL_ia32cap} = '~0x200000200000000';
 my $proxy = TLSProxy::Proxy->new(
-    \&extension_filter,
+    \&inject_duplicate_extension_clienthello,
     cmdstr(app(["openssl"]), display => 1),
     srctop_file("apps", "server.pem"),
     (!$ENV{HARNESS_ACTIVE} || $ENV{HARNESS_VERBOSE})
 );
 
-plan tests => 3;
-
-# Test 1: Sending a zero length extension block should pass
-$proxy->start();
-ok(TLSProxy::Message->success, "Zero extension length test");
 
 sub extension_filter
 {
     my $proxy = shift;
 
+    if ($proxy->flight == 1) {
+        # Change the ServerRandom so that the downgrade sentinel doesn't cause
+        # the connection to fail
+        my $message = ${$proxy->message_list}[1];
+        $message->random("\0"x32);
+        $message->repack();
+        return;
+    }
+
     # We're only interested in the initial ClientHello
     if ($proxy->flight != 0) {
         return;
@@ -59,7 +81,6 @@ sub extension_filter
     }
 }
 
-# Test 2-3: Sending a duplicate extension should fail.
 sub inject_duplicate_extension
 {
   my ($proxy, $message_type) = @_;
@@ -67,9 +88,11 @@ sub inject_duplicate_extension
     foreach my $message (@{$proxy->message_list}) {
         if ($message->mt == $message_type) {
           my %extensions = %{$message->extension_data};
-            # Add a duplicate (unknown) extension.
-            $message->set_extension(TLSProxy::Message::EXT_DUPLICATE_EXTENSION, "");
-            $message->set_extension(TLSProxy::Message::EXT_DUPLICATE_EXTENSION, "");
+            # Add a duplicate extension. We use cryptopro_bug since we never
+            # normally write that one, and it is allowed as unsolicited in the
+            # ServerHello
+            $message->set_extension(TLSProxy::Message::EXT_CRYPTOPRO_BUG_EXTENSION, "");
+            $message->dupext(TLSProxy::Message::EXT_CRYPTOPRO_BUG_EXTENSION);
             $message->repack();
         }
     }
@@ -80,11 +103,13 @@ sub inject_duplicate_extension_clienthello
     my $proxy = shift;
 
     # We're only interested in the initial ClientHello
-    if ($proxy->flight != 0) {
+    if ($proxy->flight == 0) {
+        inject_duplicate_extension($proxy, TLSProxy::Message::MT_CLIENT_HELLO);
         return;
     }
 
-    inject_duplicate_extension($proxy, TLSProxy::Message::MT_CLIENT_HELLO);
+    my $last_record = @{$proxy->{record_list}}[-1];
+    $fatal_alert = 1 if $last_record->is_fatal_alert(1);
 }
 
 sub inject_duplicate_extension_serverhello
@@ -92,20 +117,147 @@ sub inject_duplicate_extension_serverhello
     my $proxy = shift;
 
     # We're only interested in the initial ServerHello
+    if ($proxy->flight == 0) {
+        return;
+    } elsif ($proxy->flight == 1) {
+        inject_duplicate_extension($proxy, TLSProxy::Message::MT_SERVER_HELLO);
+        return;
+    }
+
+    my $last_record = @{$proxy->{record_list}}[-1];
+    $fatal_alert = 1 if $last_record->is_fatal_alert(0);
+}
+
+sub inject_unsolicited_extension
+{
+    my $proxy = shift;
+    my $message;
+    state $sent_unsolisited_extension;
+
+    if ($proxy->flight == 0) {
+        $sent_unsolisited_extension = 0;
+        return;
+    }
+
+    # We're only interested in the initial ServerHello/EncryptedExtensions
     if ($proxy->flight != 1) {
+        if ($sent_unsolisited_extension) {
+            my $last_record = @{$proxy->record_list}[-1];
+            $fatal_alert = 1 if $last_record->is_fatal_alert(0);
+        }
         return;
     }
 
-    inject_duplicate_extension($proxy, TLSProxy::Message::MT_SERVER_HELLO);
+    if ($testtype == UNSOLICITED_SERVER_NAME_TLS13) {
+        return if (!defined($message = ${$proxy->message_list}[2]));
+        die "Expecting EE message ".($message->mt).","
+                                   .${$proxy->message_list}[1]->mt.", "
+                                   .${$proxy->message_list}[3]->mt
+            if $message->mt != TLSProxy::Message::MT_ENCRYPTED_EXTENSIONS;
+    } else {
+        $message = ${$proxy->message_list}[1];
+    }
+
+    my $ext = pack "C2",
+        0x00, 0x00; #Extension length
+
+    my $type;
+    if ($testtype == UNSOLICITED_SERVER_NAME
+            || $testtype == UNSOLICITED_SERVER_NAME_TLS13) {
+        $type = TLSProxy::Message::EXT_SERVER_NAME;
+    } elsif ($testtype == UNSOLICITED_SCT) {
+        $type = TLSProxy::Message::EXT_SCT;
+    } elsif ($testtype == NONCOMPLIANT_SUPPORTED_GROUPS) {
+        $type = TLSProxy::Message::EXT_SUPPORTED_GROUPS;
+    }
+    $message->set_extension($type, $ext);
+    $message->repack();
+    $sent_unsolisited_extension = 1;
 }
 
-$proxy->clear();
-$proxy->filter(\&inject_duplicate_extension_clienthello);
-$proxy->start();
-ok(TLSProxy::Message->fail(), "Duplicate ClientHello extension");
+sub inject_cryptopro_extension
+{
+    my $proxy = shift;
+
+    # We're only interested in the initial ClientHello
+    if ($proxy->flight != 0) {
+        return;
+    }
+
+    my $message = ${$proxy->message_list}[0];
+    $message->set_extension(TLSProxy::Message::EXT_CRYPTOPRO_BUG_EXTENSION, "");
+    $message->repack();
+}
 
+# Test 1-2: Sending a duplicate extension should fail.
+$proxy->start() or plan skip_all => "Unable to start up Proxy for tests";
+plan tests => 8;
+ok($fatal_alert, "Duplicate ClientHello extension");
+
+$fatal_alert = 0;
 $proxy->clear();
 $proxy->filter(\&inject_duplicate_extension_serverhello);
 $proxy->start();
-ok(TLSProxy::Message->fail(), "Duplicate ServerHello extension");
+ok($fatal_alert, "Duplicate ServerHello extension");
+
+SKIP: {
+    skip "TLS <= 1.2 disabled", 2 if $no_below_tls13;
+
+    #Test 3: Sending a zero length extension block should pass
+    $proxy->clear();
+    $proxy->filter(\&extension_filter);
+    $proxy->start();
+    ok(TLSProxy::Message->success, "Zero extension length test");
+
+    #Test 4: Inject an unsolicited extension (<= TLSv1.2)
+    $fatal_alert = 0;
+    $proxy->clear();
+    $proxy->filter(\&inject_unsolicited_extension);
+    $testtype = UNSOLICITED_SERVER_NAME;
+    $proxy->clientflags("-no_tls1_3 -noservername");
+    $proxy->start();
+    ok($fatal_alert, "Unsolicited server name extension");
+}
+SKIP: {
+    skip "TLS <= 1.2 disabled or EC disabled", 1
+        if $no_below_tls13 || disabled("ec");
+    #Test 5: Inject a noncompliant supported_groups extension (<= TLSv1.2)
+    $proxy->clear();
+    $proxy->filter(\&inject_unsolicited_extension);
+    $testtype = NONCOMPLIANT_SUPPORTED_GROUPS;
+    $proxy->clientflags("-no_tls1_3");
+    $proxy->start();
+    ok(TLSProxy::Message->success(), "Noncompliant supported_groups extension");
+}
 
+SKIP: {
+    skip "TLS <= 1.2 or CT disabled", 1
+        if $no_below_tls13 || disabled("ct");
+    #Test 6: Same as above for the SCT extension which has special handling
+    $fatal_alert = 0;
+    $proxy->clear();
+    $testtype = UNSOLICITED_SCT;
+    $proxy->clientflags("-no_tls1_3");
+    $proxy->start();
+    ok($fatal_alert, "Unsolicited sct extension");
+}
+
+SKIP: {
+    skip "TLS 1.3 disabled", 1 if disabled("tls1_3");
+    #Test 7: Inject an unsolicited extension (TLSv1.3)
+    $fatal_alert = 0;
+    $proxy->clear();
+    $proxy->filter(\&inject_unsolicited_extension);
+    $testtype = UNSOLICITED_SERVER_NAME_TLS13;
+    $proxy->clientflags("-noservername");
+    $proxy->start();
+    ok($fatal_alert, "Unsolicited server name extension (TLSv1.3)");
+}
+
+#Test 8: Send the cryptopro extension in a ClientHello. Normally this is an
+#        unsolicited extension only ever seen in the ServerHello. We should
+#        ignore it in a ClientHello
+$proxy->clear();
+$proxy->filter(\&inject_cryptopro_extension);
+$proxy->start();
+ok(TLSProxy::Message->success(), "Cryptopro extension in ClientHello");