* Hudson (tjh@cryptsoft.com).
*
*/
+/* ====================================================================
+ * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
+ * ECC cipher suite support in OpenSSL originally developed by
+ * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
+ */
#ifndef HEADER_SSL3_H
#define HEADER_SSL3_H
#define SSL3_CK_ADH_DES_64_CBC_SHA 0x0300001A
#define SSL3_CK_ADH_DES_192_CBC_SHA 0x0300001B
-#define SSL3_CK_FZA_DMS_NULL_SHA 0x0300001C
-#define SSL3_CK_FZA_DMS_FZA_SHA 0x0300001D
-#define SSL3_CK_FZA_DMS_RC4_SHA 0x0300001E
+#if 0
+ #define SSL3_CK_FZA_DMS_NULL_SHA 0x0300001C
+ #define SSL3_CK_FZA_DMS_FZA_SHA 0x0300001D
+ #if 0 /* Because it clashes with KRB5, is never used any more, and is safe
+ to remove according to David Hopwood <david.hopwood@zetnet.co.uk>
+ of the ietf-tls list */
+ #define SSL3_CK_FZA_DMS_RC4_SHA 0x0300001E
+ #endif
+#endif
/* VRS Additional Kerberos5 entries
*/
-#define SSL3_CK_KRB5_DES_40_CBC_SHA 0x03000021
-#define SSL3_CK_KRB5_DES_40_CBC_MD5 0x03000022
-#define SSL3_CK_KRB5_DES_64_CBC_SHA 0x03000023
-#define SSL3_CK_KRB5_DES_64_CBC_MD5 0x03000024
-#define SSL3_CK_KRB5_DES_192_CBC3_SHA 0x03000025
-#define SSL3_CK_KRB5_DES_192_CBC3_MD5 0x03000026
-
-#define SSL3_TXT_KRB5_DES_40_CBC_SHA "EXP-KRB5-DES-CBC-SHA"
-#define SSL3_TXT_KRB5_DES_40_CBC_MD5 "EXP-KRB5-DES-CBC-MD5"
-#define SSL3_TXT_KRB5_DES_64_CBC_SHA "KRB5-DES-CBC-SHA"
-#define SSL3_TXT_KRB5_DES_64_CBC_MD5 "KRB5-DES-CBC-MD5"
-#define SSL3_TXT_KRB5_DES_192_CBC3_SHA "KRB5-DES-CBC3-SHA"
-#define SSL3_TXT_KRB5_DES_192_CBC3_MD5 "KRB5-DES-CBC3-MD5"
+#define SSL3_CK_KRB5_DES_64_CBC_SHA 0x0300001E
+#define SSL3_CK_KRB5_DES_192_CBC3_SHA 0x0300001F
+#define SSL3_CK_KRB5_RC4_128_SHA 0x03000020
+#define SSL3_CK_KRB5_IDEA_128_CBC_SHA 0x03000021
+#define SSL3_CK_KRB5_DES_64_CBC_MD5 0x03000022
+#define SSL3_CK_KRB5_DES_192_CBC3_MD5 0x03000023
+#define SSL3_CK_KRB5_RC4_128_MD5 0x03000024
+#define SSL3_CK_KRB5_IDEA_128_CBC_MD5 0x03000025
+
+#define SSL3_CK_KRB5_DES_40_CBC_SHA 0x03000026
+#define SSL3_CK_KRB5_RC2_40_CBC_SHA 0x03000027
+#define SSL3_CK_KRB5_RC4_40_SHA 0x03000028
+#define SSL3_CK_KRB5_DES_40_CBC_MD5 0x03000029
+#define SSL3_CK_KRB5_RC2_40_CBC_MD5 0x0300002A
+#define SSL3_CK_KRB5_RC4_40_MD5 0x0300002B
#define SSL3_TXT_RSA_NULL_MD5 "NULL-MD5"
#define SSL3_TXT_RSA_NULL_SHA "NULL-SHA"
#define SSL3_TXT_ADH_DES_64_CBC_SHA "ADH-DES-CBC-SHA"
#define SSL3_TXT_ADH_DES_192_CBC_SHA "ADH-DES-CBC3-SHA"
-#define SSL3_TXT_FZA_DMS_NULL_SHA "FZA-NULL-SHA"
-#define SSL3_TXT_FZA_DMS_FZA_SHA "FZA-FZA-CBC-SHA"
-#define SSL3_TXT_FZA_DMS_RC4_SHA "FZA-RC4-SHA"
+#if 0
+ #define SSL3_TXT_FZA_DMS_NULL_SHA "FZA-NULL-SHA"
+ #define SSL3_TXT_FZA_DMS_FZA_SHA "FZA-FZA-CBC-SHA"
+ #define SSL3_TXT_FZA_DMS_RC4_SHA "FZA-RC4-SHA"
+#endif
+
+#define SSL3_TXT_KRB5_DES_64_CBC_SHA "KRB5-DES-CBC-SHA"
+#define SSL3_TXT_KRB5_DES_192_CBC3_SHA "KRB5-DES-CBC3-SHA"
+#define SSL3_TXT_KRB5_RC4_128_SHA "KRB5-RC4-SHA"
+#define SSL3_TXT_KRB5_IDEA_128_CBC_SHA "KRB5-IDEA-CBC-SHA"
+#define SSL3_TXT_KRB5_DES_64_CBC_MD5 "KRB5-DES-CBC-MD5"
+#define SSL3_TXT_KRB5_DES_192_CBC3_MD5 "KRB5-DES-CBC3-MD5"
+#define SSL3_TXT_KRB5_RC4_128_MD5 "KRB5-RC4-MD5"
+#define SSL3_TXT_KRB5_IDEA_128_CBC_MD5 "KRB5-IDEA-CBC-MD5"
+
+#define SSL3_TXT_KRB5_DES_40_CBC_SHA "EXP-KRB5-DES-CBC-SHA"
+#define SSL3_TXT_KRB5_RC2_40_CBC_SHA "EXP-KRB5-RC2-CBC-SHA"
+#define SSL3_TXT_KRB5_RC4_40_SHA "EXP-KRB5-RC4-SHA"
+#define SSL3_TXT_KRB5_DES_40_CBC_MD5 "EXP-KRB5-DES-CBC-MD5"
+#define SSL3_TXT_KRB5_RC2_40_CBC_MD5 "EXP-KRB5-RC2-CBC-MD5"
+#define SSL3_TXT_KRB5_RC4_40_MD5 "EXP-KRB5-RC4-MD5"
#define SSL3_SSL_SESSION_ID_LENGTH 32
#define SSL3_MAX_SSL_SESSION_ID_LENGTH 32
#define SSL3_SESSION_ID_SIZE 32
#define SSL3_RT_HEADER_LENGTH 5
-/* Due to MS stuffing up, this can change.... */
-#if defined(OPENSSL_SYS_WIN16) || \
- (defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_WIN32))
-#define SSL3_RT_MAX_EXTRA (14000)
+#ifndef SSL3_ALIGN_PAYLOAD
+ /* Some will argue that this increases memory footprint, but it's
+ * not actually true. Point is that malloc has to return at least
+ * 64-bit aligned pointers, meaning that allocating 5 bytes wastes
+ * 3 bytes in either case. Suggested pre-gaping simply moves these
+ * wasted bytes from the end of allocated region to its front,
+ * but makes data payload aligned, which improves performance:-) */
+# define SSL3_ALIGN_PAYLOAD 8
#else
-#define SSL3_RT_MAX_EXTRA (16384)
+# if (SSL3_ALIGN_PAYLOAD&(SSL3_ALIGN_PAYLOAD-1))!=0
+# error "insane SSL3_ALIGN_PAYLOAD"
+# undef SSL3_ALIGN_PAYLOAD
+# endif
#endif
+/* This is the maximum MAC (digest) size used by the SSL library.
+ * Currently maximum of 20 is used by SHA1, but we reserve for
+ * future extension for 512-bit hashes.
+ */
+
+#define SSL3_RT_MAX_MD_SIZE 64
+
+/* Maximum block size used in all ciphersuites. Currently 16 for AES.
+ */
+
+#define SSL_RT_MAX_CIPHER_BLOCK_SIZE 16
+
+#define SSL3_RT_MAX_EXTRA (16384)
+
+/* Maximum plaintext length: defined by SSL/TLS standards */
#define SSL3_RT_MAX_PLAIN_LENGTH 16384
-#define SSL3_RT_MAX_COMPRESSED_LENGTH (1024+SSL3_RT_MAX_PLAIN_LENGTH)
-#define SSL3_RT_MAX_ENCRYPTED_LENGTH (1024+SSL3_RT_MAX_COMPRESSED_LENGTH)
-#define SSL3_RT_MAX_PACKET_SIZE (SSL3_RT_MAX_ENCRYPTED_LENGTH+SSL3_RT_HEADER_LENGTH)
-#define SSL3_RT_MAX_DATA_SIZE (1024*1024)
+/* Maximum compression overhead: defined by SSL/TLS standards */
+#define SSL3_RT_MAX_COMPRESSED_OVERHEAD 1024
+
+/* The standards give a maximum encryption overhead of 1024 bytes.
+ * In practice the value is lower than this. The overhead is the maximum
+ * number of padding bytes (256) plus the mac size.
+ */
+#define SSL3_RT_MAX_ENCRYPTED_OVERHEAD (256 + SSL3_RT_MAX_MD_SIZE)
+
+/* OpenSSL currently only uses a padding length of at most one block so
+ * the send overhead is smaller.
+ */
+
+#define SSL3_RT_SEND_MAX_ENCRYPTED_OVERHEAD \
+ (SSL_RT_MAX_CIPHER_BLOCK_SIZE + SSL3_RT_MAX_MD_SIZE)
+
+/* If compression isn't used don't include the compression overhead */
+
+#ifdef OPENSSL_NO_COMP
+#define SSL3_RT_MAX_COMPRESSED_LENGTH SSL3_RT_MAX_PLAIN_LENGTH
+#else
+#define SSL3_RT_MAX_COMPRESSED_LENGTH \
+ (SSL3_RT_MAX_PLAIN_LENGTH+SSL3_RT_MAX_COMPRESSED_OVERHEAD)
+#endif
+#define SSL3_RT_MAX_ENCRYPTED_LENGTH \
+ (SSL3_RT_MAX_ENCRYPTED_OVERHEAD+SSL3_RT_MAX_COMPRESSED_LENGTH)
+#define SSL3_RT_MAX_PACKET_SIZE \
+ (SSL3_RT_MAX_ENCRYPTED_LENGTH+SSL3_RT_HEADER_LENGTH)
#define SSL3_MD_CLIENT_FINISHED_CONST "\x43\x4C\x4E\x54"
#define SSL3_MD_SERVER_FINISHED_CONST "\x53\x52\x56\x52"
/*rw*/ unsigned char *data; /* pointer to the record data */
/*rw*/ unsigned char *input; /* where the decode bytes are */
/*r */ unsigned char *comp; /* only used with decompression - malloc()ed */
+/*r */ unsigned long epoch; /* epoch number, needed by DTLS1 */
+/*r */ unsigned char seq_num[8]; /* sequence number, needed by DTLS1 */
} SSL3_RECORD;
typedef struct ssl3_buffer_st
#define SSL3_CT_RSA_EPHEMERAL_DH 5
#define SSL3_CT_DSS_EPHEMERAL_DH 6
#define SSL3_CT_FORTEZZA_DMS 20
-#define SSL3_CT_NUMBER 7
+/* SSL3_CT_NUMBER is used to size arrays and it must be large
+ * enough to contain all of the cert types defined either for
+ * SSLv3 and TLSv1.
+ */
+#define SSL3_CT_NUMBER 7
+
#define SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS 0x0001
#define SSL3_FLAGS_DELAY_CLIENT_FINISHED 0x0002
int need_empty_fragments;
int empty_fragment_done;
+ /* The value of 'extra' when the buffers were initialized */
+ int init_extra;
+
SSL3_BUFFER rbuf; /* read IO goes into here */
SSL3_BUFFER wbuf; /* write IO goes into here */
#ifndef OPENSSL_NO_DH
DH *dh;
#endif
+
+#ifndef OPENSSL_NO_ECDH
+ EC_KEY *ecdh; /* holds short lived ECDH key */
+#endif
+
/* used when SSL_ST_FLUSH_DATA is entered */
int next_state;
} SSL3_STATE;
+
/* SSLv3 */
/*client */
/* extra state */
/* read from server */
#define SSL3_ST_CR_SRVR_HELLO_A (0x120|SSL_ST_CONNECT)
#define SSL3_ST_CR_SRVR_HELLO_B (0x121|SSL_ST_CONNECT)
+#define DTLS1_ST_CR_HELLO_VERIFY_REQUEST_A (0x126|SSL_ST_CONNECT)
+#define DTLS1_ST_CR_HELLO_VERIFY_REQUEST_B (0x127|SSL_ST_CONNECT)
#define SSL3_ST_CR_CERT_A (0x130|SSL_ST_CONNECT)
#define SSL3_ST_CR_CERT_B (0x131|SSL_ST_CONNECT)
#define SSL3_ST_CR_KEY_EXCH_A (0x140|SSL_ST_CONNECT)
#define SSL3_ST_SR_CLNT_HELLO_B (0x111|SSL_ST_ACCEPT)
#define SSL3_ST_SR_CLNT_HELLO_C (0x112|SSL_ST_ACCEPT)
/* write to client */
+#define DTLS1_ST_SW_HELLO_VERIFY_REQUEST_A (0x113|SSL_ST_ACCEPT)
+#define DTLS1_ST_SW_HELLO_VERIFY_REQUEST_B (0x114|SSL_ST_ACCEPT)
#define SSL3_ST_SW_HELLO_REQ_A (0x120|SSL_ST_ACCEPT)
#define SSL3_ST_SW_HELLO_REQ_B (0x121|SSL_ST_ACCEPT)
#define SSL3_ST_SW_HELLO_REQ_C (0x122|SSL_ST_ACCEPT)
#define SSL3_MT_CERTIFICATE_VERIFY 15
#define SSL3_MT_CLIENT_KEY_EXCHANGE 16
#define SSL3_MT_FINISHED 20
+#define DTLS1_MT_HELLO_VERIFY_REQUEST 3
+
#define SSL3_MT_CCS 1
projects / openssl.git / blobdiff