BUF_MEM *buf;
unsigned long alg_k,Time=(unsigned long)time(NULL);
void (*cb)(const SSL *ssl,int type,int val)=NULL;
- long num1;
int ret= -1;
int new_state,state,skip=0;
s->state=SSL3_ST_SR_CLNT_HELLO_A;
s->ctx->stats.sess_accept++;
}
+ else if (!s->s3->send_connection_binding &&
+ !(s->options & SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION))
+ {
+ /* Server attempting to renegotiate with
+ * client that doesn't support secure
+ * renegotiation.
+ */
+ SSLerr(SSL_F_SSL3_ACCEPT, SSL_R_UNSAFE_LEGACY_RENEGOTIATION_DISABLED);
+ ssl3_send_alert(s,SSL3_AL_FATAL,SSL_AD_HANDSHAKE_FAILURE);
+ ret = -1;
+ goto end;
+ }
else
{
/* s->state == SSL_ST_RENEGOTIATE,
case SSL3_ST_SW_SRVR_HELLO_B:
ret=ssl3_send_server_hello(s);
if (ret <= 0) goto end;
-
+#ifndef OPENSSL_NO_TLSEXT
if (s->hit)
- s->state=SSL3_ST_SW_CHANGE_A;
+ {
+ if (s->tlsext_ticket_expected)
+ s->state=SSL3_ST_SW_SESSION_TICKET_A;
+ else
+ s->state=SSL3_ST_SW_CHANGE_A;
+ }
+#else
+ if (s->hit)
+ s->state=SSL3_ST_SW_CHANGE_A;
+#endif
else
s->state=SSL3_ST_SW_CERT_A;
s->init_num=0;
break;
case SSL3_ST_SW_FLUSH:
- /* number of bytes to be flushed */
- num1=BIO_ctrl(s->wbio,BIO_CTRL_INFO,0,NULL);
- if (num1 > 0)
+
+ /* This code originally checked to see if
+ * any data was pending using BIO_CTRL_INFO
+ * and then flushed. This caused problems
+ * as documented in PR#1939. The proposed
+ * fix doesn't completely resolve this issue
+ * as buggy implementations of BIO_CTRL_PENDING
+ * still exist. So instead we just flush
+ * unconditionally.
+ */
+
+ s->rwstate=SSL_WRITING;
+ if (BIO_flush(s->wbio) <= 0)
{
- s->rwstate=SSL_WRITING;
- num1=BIO_flush(s->wbio);
- if (num1 <= 0) { ret= -1; goto end; }
- s->rwstate=SSL_NOTHING;
+ ret= -1;
+ goto end;
}
+ s->rwstate=SSL_NOTHING;
s->state=s->s3->tmp.next_state;
break;
* the client sends its ECDH pub key in
* a certificate, the CertificateVerify
* message is not sent.
+ * Also for GOST ciphersuites when
+ * the client uses its key from the certificate
+ * for key exchange.
*/
+#if defined(OPENSSL_NO_TLSEXT) || defined(OPENSSL_NO_NPN)
s->state=SSL3_ST_SR_FINISHED_A;
+#else
+ if (s->s3->next_proto_neg_seen)
+ s->state=SSL3_ST_SR_NEXT_PROTO_A;
+ else
+ s->state=SSL3_ST_SR_FINISHED_A;
+#endif
s->init_num = 0;
}
else
{
int offset=0;
int dgst_num;
+
s->state=SSL3_ST_SR_CERT_VRFY_A;
s->init_num=0;
* should be generalized. But it is next step
*/
if (s->s3->handshake_buffer)
- ssl3_digest_cached_records(s);
+ if (!ssl3_digest_cached_records(s))
+ return -1;
for (dgst_num=0; dgst_num<SSL_MAX_DIGEST;dgst_num++)
if (s->s3->handshake_dgst[dgst_num])
{
+ int dgst_size;
+
s->method->ssl3_enc->cert_verify_mac(s,EVP_MD_CTX_type(s->s3->handshake_dgst[dgst_num]),&(s->s3->tmp.cert_verify_md[offset]));
- offset+=EVP_MD_CTX_size(s->s3->handshake_dgst[dgst_num]);
+ dgst_size=EVP_MD_CTX_size(s->s3->handshake_dgst[dgst_num]);
+ if (dgst_size < 0)
+ {
+ ret = -1;
+ goto end;
+ }
+ offset+=dgst_size;
}
}
break;
ret=ssl3_get_cert_verify(s);
if (ret <= 0) goto end;
+#if defined(OPENSSL_NO_TLSEXT) || defined(OPENSSL_NO_NPN)
s->state=SSL3_ST_SR_FINISHED_A;
+#else
+ if (s->s3->next_proto_neg_seen)
+ s->state=SSL3_ST_SR_NEXT_PROTO_A;
+ else
+ s->state=SSL3_ST_SR_FINISHED_A;
+#endif
s->init_num=0;
break;
+#if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NPN)
+ case SSL3_ST_SR_NEXT_PROTO_A:
+ case SSL3_ST_SR_NEXT_PROTO_B:
+ ret=ssl3_get_next_proto(s);
+ if (ret <= 0) goto end;
+ s->init_num = 0;
+ s->state=SSL3_ST_SR_FINISHED_A;
+ break;
+#endif
+
case SSL3_ST_SR_FINISHED_A:
case SSL3_ST_SR_FINISHED_B:
ret=ssl3_get_finished(s,SSL3_ST_SR_FINISHED_A,
SSL3_ST_SR_FINISHED_B);
if (ret <= 0) goto end;
- if (s->hit)
- s->state=SSL_ST_OK;
#ifndef OPENSSL_NO_TLSEXT
- else if (s->tlsext_ticket_expected)
+ if (s->tlsext_ticket_expected)
s->state=SSL3_ST_SW_SESSION_TICKET_A;
+ else if (s->hit)
+ s->state=SSL_ST_OK;
+#else
+ if (s->hit)
+ s->state=SSL_ST_OK;
#endif
else
s->state=SSL3_ST_SW_CHANGE_A;
if (ret <= 0) goto end;
s->state=SSL3_ST_SW_FLUSH;
if (s->hit)
+ {
+#if defined(OPENSSL_NO_TLSEXT) || defined(OPENSSL_NO_NPN)
s->s3->tmp.next_state=SSL3_ST_SR_FINISHED_A;
+#else
+ if (s->s3->next_proto_neg_seen)
+ s->s3->tmp.next_state=SSL3_ST_SR_NEXT_PROTO_A;
+ else
+ s->s3->tmp.next_state=SSL3_ST_SR_FINISHED_A;
+#endif
+ }
else
s->s3->tmp.next_state=SSL_ST_OK;
s->init_num=0;
goto f_err;
}
+ /* If we require cookies and this ClientHello doesn't
+ * contain one, just return since we do not want to
+ * allocate any memory yet. So check cookie length...
+ */
+ if (SSL_get_options(s) & SSL_OP_COOKIE_EXCHANGE)
+ {
+ unsigned int session_length, cookie_length;
+
+ session_length = *(p + SSL3_RANDOM_SIZE);
+ cookie_length = *(p + SSL3_RANDOM_SIZE + session_length + 1);
+
+ if (cookie_length == 0)
+ return 1;
+ }
+
/* load the client random */
memcpy(s->s3->client_random,p,SSL3_RANDOM_SIZE);
p+=SSL3_RANDOM_SIZE;
p+=j;
- if (s->version == DTLS1_VERSION)
+ if (s->version == DTLS1_VERSION || s->version == DTLS1_BAD_VER)
{
/* cookie stuff */
cookie_len = *(p++);
- if ( (SSL_get_options(s) & SSL_OP_COOKIE_EXCHANGE) &&
- s->d1->send_cookie == 0)
- {
- /* HelloVerifyMessage has already been sent */
- if ( cookie_len != s->d1->cookie_len)
- {
- al = SSL_AD_HANDSHAKE_FAILURE;
- SSLerr(SSL_F_SSL3_GET_CLIENT_HELLO, SSL_R_COOKIE_MISMATCH);
- goto f_err;
- }
- }
-
/*
* The ClientHello may contain a cookie even if the
* HelloVerify message has not been sent--make sure that it
}
/* verify the cookie if appropriate option is set. */
- if ( (SSL_get_options(s) & SSL_OP_COOKIE_EXCHANGE) &&
+ if ((SSL_get_options(s) & SSL_OP_COOKIE_EXCHANGE) &&
cookie_len > 0)
{
memcpy(s->d1->rcvd_cookie, p, cookie_len);
SSL_R_COOKIE_MISMATCH);
goto f_err;
}
+
+ ret = 2;
}
p += cookie_len;
break;
}
}
- if (j == 0)
+ if (j == 0 && (s->options & SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG) && (sk_SSL_CIPHER_num(ciphers) == 1))
{
- if ((s->options & SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG) && (sk_SSL_CIPHER_num(ciphers) == 1))
- {
- /* Very bad for multi-threading.... */
- s->session->cipher=sk_SSL_CIPHER_value(ciphers, 0);
- }
- else
+ /* Special case as client bug workaround: the previously used cipher may
+ * not be in the current list, the client instead might be trying to
+ * continue using a cipher that before wasn't chosen due to server
+ * preferences. We'll have to reject the connection if the cipher is not
+ * enabled, though. */
+ c = sk_SSL_CIPHER_value(ciphers, 0);
+ if (sk_SSL_CIPHER_find(SSL_get_ciphers(s), c) >= 0)
{
- /* we need to have the cipher in the cipher
- * list if we are asked to reuse it */
- al=SSL_AD_ILLEGAL_PARAMETER;
- SSLerr(SSL_F_SSL3_GET_CLIENT_HELLO,SSL_R_REQUIRED_CIPHER_MISSING);
- goto f_err;
+ s->session->cipher = c;
+ j = 1;
}
}
+ if (j == 0)
+ {
+ /* we need to have the cipher in the cipher
+ * list if we are asked to reuse it */
+ al=SSL_AD_ILLEGAL_PARAMETER;
+ SSLerr(SSL_F_SSL3_GET_CLIENT_HELLO,SSL_R_REQUIRED_CIPHER_MISSING);
+ goto f_err;
+ }
}
/* compression */
#ifndef OPENSSL_NO_TLSEXT
/* TLS extensions*/
- if (s->version > SSL3_VERSION)
+ if (s->version >= SSL3_VERSION)
{
if (!ssl_parse_clienthello_tlsext(s,&p,d,n, &al))
{
SSLerr(SSL_F_SSL3_GET_CLIENT_HELLO,SSL_R_CLIENTHELLO_TLSEXT);
goto err;
}
+
+ /* Check if we want to use external pre-shared secret for this
+ * handshake for not reused session only. We need to generate
+ * server_random before calling tls_session_secret_cb in order to allow
+ * SessionTicket processing to use it in key derivation. */
+ {
+ unsigned long Time;
+ unsigned char *pos;
+ Time=(unsigned long)time(NULL); /* Time */
+ pos=s->s3->server_random;
+ l2n(Time,pos);
+ if (RAND_pseudo_bytes(pos,SSL3_RANDOM_SIZE-4) <= 0)
+ {
+ al=SSL_AD_INTERNAL_ERROR;
+ goto f_err;
+ }
+ }
+
+ if (!s->hit && s->version >= TLS1_VERSION && s->tls_session_secret_cb)
+ {
+ SSL_CIPHER *pref_cipher=NULL;
+
+ s->session->master_key_length=sizeof(s->session->master_key);
+ if(s->tls_session_secret_cb(s, s->session->master_key, &s->session->master_key_length,
+ ciphers, &pref_cipher, s->tls_session_secret_cb_arg))
+ {
+ s->hit=1;
+ s->session->ciphers=ciphers;
+ s->session->verify_result=X509_V_OK;
+
+ ciphers=NULL;
+
+ /* check if some cipher was preferred by call back */
+ pref_cipher=pref_cipher ? pref_cipher : ssl3_choose_cipher(s, s->session->ciphers, SSL_get_ciphers(s));
+ if (pref_cipher == NULL)
+ {
+ al=SSL_AD_HANDSHAKE_FAILURE;
+ SSLerr(SSL_F_SSL3_GET_CLIENT_HELLO,SSL_R_NO_SHARED_CIPHER);
+ goto f_err;
+ }
+
+ s->session->cipher=pref_cipher;
+
+ if (s->cipher_list)
+ sk_SSL_CIPHER_free(s->cipher_list);
+
+ if (s->cipher_list_by_id)
+ sk_SSL_CIPHER_free(s->cipher_list_by_id);
+
+ s->cipher_list = sk_SSL_CIPHER_dup(s->session->ciphers);
+ s->cipher_list_by_id = sk_SSL_CIPHER_dup(s->session->ciphers);
+ }
+ }
#endif
/* Worst case, we will use the NULL compression, but if we have other
* algorithms from the client, starting at q. */
s->s3->tmp.new_compression=NULL;
#ifndef OPENSSL_NO_COMP
- if (!(s->options & SSL_OP_NO_COMPRESSION) && s->ctx->comp_methods)
+ /* This only happens if we have a cache hit */
+ if (s->session->compress_meth != 0)
+ {
+ int m, comp_id = s->session->compress_meth;
+ /* Perform sanity checks on resumed compression algorithm */
+ /* Can't disable compression */
+ if (s->options & SSL_OP_NO_COMPRESSION)
+ {
+ al=SSL_AD_INTERNAL_ERROR;
+ SSLerr(SSL_F_SSL3_GET_CLIENT_HELLO,SSL_R_INCONSISTENT_COMPRESSION);
+ goto f_err;
+ }
+ /* Look for resumed compression method */
+ for (m = 0; m < sk_SSL_COMP_num(s->ctx->comp_methods); m++)
+ {
+ comp=sk_SSL_COMP_value(s->ctx->comp_methods,m);
+ if (comp_id == comp->id)
+ {
+ s->s3->tmp.new_compression=comp;
+ break;
+ }
+ }
+ if (s->s3->tmp.new_compression == NULL)
+ {
+ al=SSL_AD_INTERNAL_ERROR;
+ SSLerr(SSL_F_SSL3_GET_CLIENT_HELLO,SSL_R_INVALID_COMPRESSION_ALGORITHM);
+ goto f_err;
+ }
+ /* Look for resumed method in compression list */
+ for (m = 0; m < i; m++)
+ {
+ if (q[m] == comp_id)
+ break;
+ }
+ if (m >= i)
+ {
+ al=SSL_AD_ILLEGAL_PARAMETER;
+ SSLerr(SSL_F_SSL3_GET_CLIENT_HELLO,SSL_R_REQUIRED_COMPRESSSION_ALGORITHM_MISSING);
+ goto f_err;
+ }
+ }
+ else if (s->hit)
+ comp = NULL;
+ else if (!(s->options & SSL_OP_NO_COMPRESSION) && s->ctx->comp_methods)
{ /* See if we have a match */
int m,nn,o,v,done=0;
else
comp=NULL;
}
+#else
+ /* If compression is disabled we'd better not try to resume a session
+ * using compression.
+ */
+ if (s->session->compress_meth != 0)
+ {
+ al=SSL_AD_INTERNAL_ERROR;
+ SSLerr(SSL_F_SSL3_GET_CLIENT_HELLO,SSL_R_INCONSISTENT_COMPRESSION);
+ goto f_err;
+ }
#endif
/* Given s->session->ciphers and SSL_get_ciphers, we must
goto f_err;
}
s->s3->tmp.new_cipher=c;
- ssl3_digest_cached_records(s);
}
else
{
else
#endif
s->s3->tmp.new_cipher=s->session->cipher;
- /* Clear cached handshake records */
- BIO_free(s->s3->handshake_buffer);
- s->s3->handshake_buffer = NULL;
}
+
+ if (!ssl3_digest_cached_records(s))
+ goto f_err;
/* we now have the following setup.
* client_random
* s->tmp.new_cipher - the new cipher to use.
*/
- ret=1;
+ if (ret < 0) ret=1;
if (0)
{
f_err:
unsigned char *buf;
unsigned char *p,*d;
int i,sl;
- unsigned long l,Time;
+ unsigned long l;
+#ifdef OPENSSL_NO_TLSEXT
+ unsigned long Time;
+#endif
if (s->state == SSL3_ST_SW_SRVR_HELLO_A)
{
buf=(unsigned char *)s->init_buf->data;
+#ifdef OPENSSL_NO_TLSEXT
p=s->s3->server_random;
+ /* Generate server_random if it was not needed previously */
Time=(unsigned long)time(NULL); /* Time */
l2n(Time,p);
if (RAND_pseudo_bytes(p,SSL3_RANDOM_SIZE-4) <= 0)
return -1;
+#endif
/* Do the message type and length last */
d=p= &(buf[4]);
*(d++)=SSL3_MT_SERVER_HELLO;
l2n3(l,d);
- s->state=SSL3_ST_CW_CLNT_HELLO_B;
+ s->state=SSL3_ST_SW_SRVR_HELLO_B;
/* number of bytes to write */
s->init_num=p-buf;
s->init_off=0;
}
- /* SSL3_ST_CW_CLNT_HELLO_B */
+ /* SSL3_ST_SW_SRVR_HELLO_B */
return(ssl3_do_write(s,SSL3_RT_HANDSHAKE));
}
s->init_off=0;
}
- /* SSL3_ST_CW_CLNT_HELLO_B */
+ /* SSL3_ST_SW_SRVR_DONE_B */
return(ssl3_do_write(s,SSL3_RT_HANDSHAKE));
}
}
/* TLS and [incidentally] DTLS{0xFEFF} */
- if (s->version > SSL3_VERSION)
+ if (s->version > SSL3_VERSION && s->version != DTLS1_BAD_VER)
{
n2s(p,i);
if (n != i+2)
krb5_data enc_pms;
KSSL_CTX *kssl_ctx = s->kssl_ctx;
EVP_CIPHER_CTX ciph_ctx;
- EVP_CIPHER *enc = NULL;
+ const EVP_CIPHER *enc = NULL;
unsigned char iv[EVP_MAX_IV_LENGTH];
unsigned char pms[SSL_MAX_MASTER_KEY_LENGTH
+ EVP_MAX_BLOCK_LENGTH];
n2s(p,i);
enc_ticket.length = i;
- if (n < enc_ticket.length + 6)
+ if (n < (long)(enc_ticket.length + 6))
{
SSLerr(SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE,
SSL_R_DATA_LENGTH_TOO_LONG);
n2s(p,i);
authenticator.length = i;
- if (n < enc_ticket.length + authenticator.length + 6)
+ if (n < (long)(enc_ticket.length + authenticator.length + 6))
{
SSLerr(SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE,
SSL_R_DATA_LENGTH_TOO_LONG);
SSL_R_DATA_LENGTH_TOO_LONG);
goto err;
}
- if (!((p[0] == (s->client_version>>8)) && (p[1] == (s->client_version & 0xff))))
+ if (!((pms[0] == (s->client_version>>8)) && (pms[1] == (s->client_version & 0xff))))
{
/* The premaster secret must contain the same version number as the
* ClientHello to detect version rollback attacks (strangely, the
* If SSL_OP_TLS_ROLLBACK_BUG is set, tolerate such clients.
* (Perhaps we should have a separate BUG value for the Kerberos cipher)
*/
- if (!((s->options & SSL_OP_TLS_ROLLBACK_BUG) &&
- (p[0] == (s->version>>8)) && (p[1] == (s->version & 0xff))))
+ if (!(s->options & SSL_OP_TLS_ROLLBACK_BUG))
{
SSLerr(SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE,
SSL_AD_DECODE_ERROR);
EVP_PKEY_free(clnt_pub_pkey);
EC_POINT_free(clnt_ecpoint);
- if (srvr_ecdh != NULL)
- EC_KEY_free(srvr_ecdh);
+ EC_KEY_free(srvr_ecdh);
BN_CTX_free(bn_ctx);
+ EC_KEY_free(s->s3->tmp.ecdh);
+ s->s3->tmp.ecdh = NULL;
/* Compute the master secret */
s->session->master_key_length = s->method->ssl3_enc-> \
else
#endif
if (alg_k & SSL_kGOST)
- {
+ {
+ int ret = 0;
EVP_PKEY_CTX *pkey_ctx;
- unsigned char premaster_secret[32];
- size_t outlen;
+ EVP_PKEY *client_pub_pkey = NULL;
+ unsigned char premaster_secret[32], *start;
+ size_t outlen=32, inlen;
- /* Get our certificate privatec key*/
+ /* Get our certificate private key*/
pkey_ctx = EVP_PKEY_CTX_new(s->cert->key->privatekey,NULL);
EVP_PKEY_decrypt_init(pkey_ctx);
+ /* If client certificate is present and is of the same type, maybe
+ * use it for key exchange. Don't mind errors from
+ * EVP_PKEY_derive_set_peer, because it is completely valid to use
+ * a client certificate for authorization only. */
+ client_pub_pkey = X509_get_pubkey(s->session->peer);
+ if (client_pub_pkey)
+ {
+ if (EVP_PKEY_derive_set_peer(pkey_ctx, client_pub_pkey) <= 0)
+ ERR_clear_error();
+ }
/* Decrypt session key */
- if ((*p!=( V_ASN1_SEQUENCE| V_ASN1_CONSTRUCTED)) || p[1]!=0x81 )
+ if ((*p!=( V_ASN1_SEQUENCE| V_ASN1_CONSTRUCTED)))
{
SSLerr(SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE,SSL_R_DECRYPTION_FAILED);
- goto err;
- }
- if (EVP_PKEY_decrypt(pkey_ctx,premaster_secret,&outlen,p+3,p[2]) <0)
+ goto gerr;
+ }
+ if (p[1] == 0x81)
+ {
+ start = p+3;
+ inlen = p[2];
+ }
+ else if (p[1] < 0x80)
+ {
+ start = p+2;
+ inlen = p[1];
+ }
+ else
+ {
+ SSLerr(SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE,SSL_R_DECRYPTION_FAILED);
+ goto gerr;
+ }
+ if (EVP_PKEY_decrypt(pkey_ctx,premaster_secret,&outlen,start,inlen) <=0)
{
SSLerr(SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE,SSL_R_DECRYPTION_FAILED);
- goto err;
+ goto gerr;
}
/* Generate master secret */
- EVP_PKEY_CTX_free(pkey_ctx);
s->session->master_key_length=
s->method->ssl3_enc->generate_master_secret(s,
s->session->master_key,premaster_secret,32);
-
- }
+ /* Check if pubkey from client certificate was used */
+ if (EVP_PKEY_CTX_ctrl(pkey_ctx, -1, -1, EVP_PKEY_CTRL_PEER_KEY, 2, NULL) > 0)
+ ret = 2;
+ else
+ ret = 1;
+ gerr:
+ EVP_PKEY_free(client_pub_pkey);
+ EVP_PKEY_CTX_free(pkey_ctx);
+ if (ret)
+ return ret;
+ else
+ goto err;
+ }
else
{
al=SSL_AD_HANDSHAKE_FAILURE;
else
{
i=ssl_verify_cert_chain(s,sk);
- if (!i)
+ if (i <= 0)
{
al=ssl_verify_alarm_type(s->verify_result);
SSLerr(SSL_F_SSL3_GET_CLIENT_CERTIFICATE,SSL_R_NO_CERTIFICATE_RETURNED);
unsigned int hlen;
EVP_CIPHER_CTX ctx;
HMAC_CTX hctx;
+ SSL_CTX *tctx = s->initial_ctx;
+ unsigned char iv[EVP_MAX_IV_LENGTH];
+ unsigned char key_name[16];
/* get session encoding length */
slen = i2d_SSL_SESSION(s->session, NULL);
*(p++)=SSL3_MT_NEWSESSION_TICKET;
/* Skip message length for now */
p += 3;
+ EVP_CIPHER_CTX_init(&ctx);
+ HMAC_CTX_init(&hctx);
+ /* Initialize HMAC and cipher contexts. If callback present
+ * it does all the work otherwise use generated values
+ * from parent ctx.
+ */
+ if (tctx->tlsext_ticket_key_cb)
+ {
+ if (tctx->tlsext_ticket_key_cb(s, key_name, iv, &ctx,
+ &hctx, 1) < 0)
+ {
+ OPENSSL_free(senc);
+ return -1;
+ }
+ }
+ else
+ {
+ RAND_pseudo_bytes(iv, 16);
+ EVP_EncryptInit_ex(&ctx, EVP_aes_128_cbc(), NULL,
+ tctx->tlsext_tick_aes_key, iv);
+ HMAC_Init_ex(&hctx, tctx->tlsext_tick_hmac_key, 16,
+ tlsext_tick_md(), NULL);
+ memcpy(key_name, tctx->tlsext_tick_key_name, 16);
+ }
l2n(s->session->tlsext_tick_lifetime_hint, p);
/* Skip ticket length for now */
p += 2;
/* Output key name */
macstart = p;
- memcpy(p, s->ctx->tlsext_tick_key_name, 16);
+ memcpy(p, key_name, 16);
p += 16;
- /* Generate and output IV */
- RAND_pseudo_bytes(p, 16);
- EVP_CIPHER_CTX_init(&ctx);
+ /* output IV */
+ memcpy(p, iv, EVP_CIPHER_CTX_iv_length(&ctx));
+ p += EVP_CIPHER_CTX_iv_length(&ctx);
/* Encrypt session data */
- EVP_EncryptInit_ex(&ctx, EVP_aes_128_cbc(), NULL,
- s->ctx->tlsext_tick_aes_key, p);
- p += 16;
EVP_EncryptUpdate(&ctx, p, &len, senc, slen);
p += len;
EVP_EncryptFinal(&ctx, p, &len);
p += len;
EVP_CIPHER_CTX_cleanup(&ctx);
- HMAC_CTX_init(&hctx);
- HMAC_Init_ex(&hctx, s->ctx->tlsext_tick_hmac_key, 16,
- tlsext_tick_md(), NULL);
HMAC_Update(&hctx, macstart, p - macstart);
HMAC_Final(&hctx, p, &hlen);
HMAC_CTX_cleanup(&hctx);
/* SSL3_ST_SW_CERT_STATUS_B */
return(ssl3_do_write(s,SSL3_RT_HANDSHAKE));
}
+
+# ifndef OPENSSL_NO_NPN
+/* ssl3_get_next_proto reads a Next Protocol Negotiation handshake message. It
+ * sets the next_proto member in s if found */
+int ssl3_get_next_proto(SSL *s)
+ {
+ int ok;
+ unsigned proto_len, padding_len;
+ long n;
+ const unsigned char *p;
+
+ /* Clients cannot send a NextProtocol message if we didn't see the
+ * extension in their ClientHello */
+ if (!s->s3->next_proto_neg_seen)
+ {
+ SSLerr(SSL_F_SSL3_GET_NEXT_PROTO,SSL_R_GOT_NEXT_PROTO_WITHOUT_EXTENSION);
+ return -1;
+ }
+
+ n=s->method->ssl_get_message(s,
+ SSL3_ST_SR_NEXT_PROTO_A,
+ SSL3_ST_SR_NEXT_PROTO_B,
+ SSL3_MT_NEXT_PROTO,
+ 129,
+ &ok);
+
+ if (!ok)
+ return((int)n);
+
+ /* s->state doesn't reflect whether ChangeCipherSpec has been received
+ * in this handshake, but s->s3->change_cipher_spec does (will be reset
+ * by ssl3_get_finished). */
+ if (!s->s3->change_cipher_spec)
+ {
+ SSLerr(SSL_F_SSL3_GET_NEXT_PROTO,SSL_R_GOT_NEXT_PROTO_BEFORE_A_CCS);
+ return -1;
+ }
+
+ if (n < 2)
+ return 0; /* The body must be > 1 bytes long */
+
+ p=(unsigned char *)s->init_msg;
+
+ /* The payload looks like:
+ * uint8 proto_len;
+ * uint8 proto[proto_len];
+ * uint8 padding_len;
+ * uint8 padding[padding_len];
+ */
+ proto_len = p[0];
+ if (proto_len + 2 > s->init_num)
+ return 0;
+ padding_len = p[proto_len + 1];
+ if (proto_len + padding_len + 2 != s->init_num)
+ return 0;
+
+ s->next_proto_negotiated = OPENSSL_malloc(proto_len);
+ if (!s->next_proto_negotiated)
+ {
+ SSLerr(SSL_F_SSL3_GET_NEXT_PROTO,ERR_R_MALLOC_FAILURE);
+ return 0;
+ }
+ memcpy(s->next_proto_negotiated, p + 1, proto_len);
+ s->next_proto_negotiated_len = proto_len;
+
+ return 1;
+ }
+# endif
#endif
projects / openssl.git / blobdiff