#include <openssl/rand.h>
#include <openssl/objects.h>
#include <openssl/evp.h>
+#ifdef OPENSSL_FIPS
+#include <openssl/fips.h>
+#endif
static const SSL_METHOD *ssl23_get_server_method(int ver);
int ssl23_get_client_hello(SSL *s);
if (ver == SSL2_VERSION)
return(SSLv2_server_method());
#endif
+#ifndef OPENSSL_NO_SSL3
if (ver == SSL3_VERSION)
return(SSLv3_server_method());
- else if (ver == TLS1_VERSION)
+#endif
+ if (ver == TLS1_VERSION)
return(TLSv1_server_method());
else if (ver == TLS1_1_VERSION)
return(TLSv1_1_server_method());
+ else if (ver == TLS1_2_VERSION)
+ return(TLSv1_2_server_method());
else
return(NULL);
}
/* SSLv3/TLSv1 */
if (p[4] >= TLS1_VERSION_MINOR)
{
- if (p[4] >= TLS1_1_VERSION_MINOR &&
+ if (p[4] >= TLS1_2_VERSION_MINOR &&
+ !(s->options & SSL_OP_NO_TLSv1_2))
+ {
+ s->version=TLS1_2_VERSION;
+ s->state=SSL23_ST_SR_CLNT_HELLO_B;
+ }
+ else if (p[4] >= TLS1_1_VERSION_MINOR &&
!(s->options & SSL_OP_NO_TLSv1_1))
{
s->version=TLS1_1_VERSION;
+ /* type=2; */ /* done later to survive restarts */
s->state=SSL23_ST_SR_CLNT_HELLO_B;
}
else if (!(s->options & SSL_OP_NO_TLSv1))
(p[1] == SSL3_VERSION_MAJOR) &&
(p[5] == SSL3_MT_CLIENT_HELLO) &&
((p[3] == 0 && p[4] < 5 /* silly record length? */)
- || (p[9] == p[1])))
+ || (p[9] >= p[1])))
{
/*
* SSLv3 or tls1 header
* Client Hello message, this would be difficult, and we'd have
* to read more records to find out.
* No known SSL 3.0 client fragments ClientHello like this,
- * so we simply assume TLS 1.0 to avoid protocol version downgrade
- * attacks. */
+ * so we simply reject such connections to avoid
+ * protocol version downgrade attacks. */
if (p[3] == 0 && p[4] < 6)
{
-#if 0
SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_RECORD_TOO_SMALL);
goto err;
-#else
- v[1] = TLS1_VERSION_MINOR;
-#endif
}
+ /* if major version number > 3 set minor to a value
+ * which will use the highest version 3 we support.
+ * If TLS 2.0 ever appears we will need to revise
+ * this....
+ */
+ if (p[9] > SSL3_VERSION_MAJOR)
+ v[1]=0xff;
else
v[1]=p[10]; /* minor version according to client_version */
if (v[1] >= TLS1_VERSION_MINOR)
{
- if (v[1] >= TLS1_1_VERSION_MINOR &&
+ if (v[1] >= TLS1_2_VERSION_MINOR &&
+ !(s->options & SSL_OP_NO_TLSv1_2))
+ {
+ s->version=TLS1_2_VERSION;
+ type=3;
+ }
+ else if (v[1] >= TLS1_1_VERSION_MINOR &&
!(s->options & SSL_OP_NO_TLSv1_1))
{
s->version=TLS1_1_VERSION;
}
}
+ /* ensure that TLS_MAX_VERSION is up-to-date */
+ OPENSSL_assert(s->version <= TLS_MAX_VERSION);
+
+ if (s->version < TLS1_2_VERSION && tls1_suiteb(s))
+ {
+ SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,
+ SSL_R_ONLY_TLS_1_2_ALLOWED_IN_SUITEB_MODE);
+ goto err;
+ }
+
+#ifdef OPENSSL_FIPS
+ if (FIPS_mode() && (s->version < TLS1_VERSION))
+ {
+ SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,
+ SSL_R_ONLY_TLS_ALLOWED_IN_FIPS_MODE);
+ goto err;
+ }
+#endif
+
+ if (!ssl_security(s, SSL_SECOP_VERSION, 0, s->version, NULL))
+ {
+ SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_VERSION_TOO_LOW);
+ goto err;
+ }
+
if (s->state == SSL23_ST_SR_CLNT_HELLO_B)
{
/* we have SSLv3/TLSv1 in an SSLv2 header
v[0] = p[3]; /* == SSL3_VERSION_MAJOR */
v[1] = p[4];
+ /* An SSLv3/TLSv1 backwards-compatible CLIENT-HELLO in an SSLv2
+ * header is sent directly on the wire, not wrapped as a TLS
+ * record. It's format is:
+ * Byte Content
+ * 0-1 msg_length
+ * 2 msg_type
+ * 3-4 version
+ * 5-6 cipher_spec_length
+ * 7-8 session_id_length
+ * 9-10 challenge_length
+ * ... ...
+ */
n=((p[0]&0x7f)<<8)|p[1];
if (n > (1024*4))
{
SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_RECORD_TOO_LARGE);
goto err;
}
+ if (n < 9)
+ {
+ SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_RECORD_LENGTH_MISMATCH);
+ goto err;
+ }
j=ssl23_read_bytes(s,n+2);
+ /* We previously read 11 bytes, so if j > 0, we must have
+ * j == n+2 == s->packet_length. We have at least 11 valid
+ * packet bytes. */
if (j <= 0) return(j);
ssl3_finish_mac(s, s->packet+2, s->packet_length-2);
SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_UNSUPPORTED_PROTOCOL);
goto err;
#else
- if (!(s->ctx->options & SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION))
- {
- SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_UNSAFE_LEGACY_RENEGOTIATION_DISABLED);
- goto err;
- }
/* we are talking sslv2 */
/* we need to clean up the SSLv3/TLSv1 setup and put in the
* sslv2 stuff. */
if ((type == 2) || (type == 3))
{
/* we have SSLv3/TLSv1 (type 2: SSL2 style, type 3: SSL3/TLS style) */
+ const SSL_METHOD *new_method;
+ new_method = ssl23_get_server_method(s->version);
+ if (new_method == NULL)
+ {
+ SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_UNSUPPORTED_PROTOCOL);
+ goto err;
+ }
+ s->method = new_method;
if (!ssl_init_wbio_buffer(s,1)) goto err;
s->s3->rbuf.left=0;
s->s3->rbuf.offset=0;
}
-
- if (s->version == TLS1_1_VERSION)
- s->method = TLSv1_1_server_method();
- else if (s->version == TLS1_VERSION)
- s->method = TLSv1_server_method();
- else
- s->method = SSLv3_server_method();
#if 0 /* ssl3_get_client_hello does this */
s->client_version=(v[0]<<8)|v[1];
#endif
projects / openssl.git / blobdiff