#endif
static void get_current_time(struct timeval *t);
-static int dtls1_set_handshake_header(SSL *s, int type, unsigned long len);
static int dtls1_handshake_write(SSL *s);
static unsigned int dtls1_link_min_mtu(void);
SSL_ENC_FLAG_DTLS | SSL_ENC_FLAG_EXPLICIT_IV,
DTLS1_HM_HEADER_LENGTH,
dtls1_set_handshake_header,
+ dtls1_close_construct_packet,
dtls1_handshake_write
};
| SSL_ENC_FLAG_SHA256_PRF | SSL_ENC_FLAG_TLS1_2_CIPHERS,
DTLS1_HM_HEADER_LENGTH,
dtls1_set_handshake_header,
+ dtls1_close_construct_packet,
dtls1_handshake_write
};
}
static void dtls1_clear_queues(SSL *s)
+{
+ dtls1_clear_received_buffer(s);
+ dtls1_clear_sent_buffer(s);
+}
+
+void dtls1_clear_received_buffer(SSL *s)
{
pitem *item = NULL;
hm_fragment *frag = NULL;
dtls1_hm_fragment_free(frag);
pitem_free(item);
}
+}
+
+void dtls1_clear_sent_buffer(SSL *s)
+{
+ pitem *item = NULL;
+ hm_fragment *frag = NULL;
while ((item = pqueue_pop(s->d1->sent_messages)) != NULL) {
frag = (hm_fragment *)item->data;
}
}
+
void dtls1_free(SSL *s)
{
DTLS_RECORD_LAYER_free(&s->rlayer);
BIO_ctrl(SSL_get_rbio(s), BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT, 0,
&(s->d1->next_timeout));
/* Clear retransmission buffer */
- dtls1_clear_record_buffer(s);
+ dtls1_clear_sent_buffer(s);
}
int dtls1_check_timeout_num(SSL *s)
if (s->d1->timeout.num_alerts > 2
&& !(SSL_get_options(s) & SSL_OP_NO_QUERY_MTU)) {
mtu =
- BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_GET_FALLBACK_MTU, 0,
- NULL);
+ BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_GET_FALLBACK_MTU, 0, NULL);
if (mtu < s->d1->mtu)
s->d1->mtu = mtu;
}
GetSystemTime(&st);
SystemTimeToFileTime(&st, &now.ft);
+ /* re-bias to 1/1/1970 */
# ifdef __MINGW32__
now.ul -= 116444736000000000ULL;
# else
- now.ul -= 116444736000000000UI64; /* re-bias to 1/1/1970 */
+ /* *INDENT-OFF* */
+ now.ul -= 116444736000000000UI64;
+ /* *INDENT-ON* */
# endif
t->tv_sec = (long)(now.ul / 10000000);
t->tv_usec = ((int)(now.ul % 10000000)) / 10;
#endif
}
-
#define LISTEN_SUCCESS 2
#define LISTEN_SEND_VERIFY_REQUEST 1
unsigned char cookie[DTLS1_COOKIE_LENGTH];
unsigned char seq[SEQ_NUM_SIZE];
const unsigned char *data;
- unsigned char *p, *buf;
- unsigned long reclen, fragoff, fraglen, msglen;
+ unsigned char *buf;
+ unsigned long fragoff, fraglen, msglen;
unsigned int rectype, versmajor, msgseq, msgtype, clientvers, cookielen;
BIO *rbio, *wbio;
BUF_MEM *bufm;
goto end;
}
- if (rectype != SSL3_RT_HANDSHAKE) {
+ if (rectype != SSL3_RT_HANDSHAKE) {
SSLerr(SSL_F_DTLSV1_LISTEN, SSL_R_UNEXPECTED_MESSAGE);
goto end;
}
}
if (next == LISTEN_SEND_VERIFY_REQUEST) {
+ WPACKET wpkt;
+ unsigned int version;
+ size_t wreclen;
+
/*
* There was no cookie in the ClientHello so we need to send a
* HelloVerifyRequest. If this fails we do not worry about trying
return -1;
}
- p = &buf[DTLS1_RT_HEADER_LENGTH];
- msglen = dtls_raw_hello_verify_request(p + DTLS1_HM_HEADER_LENGTH,
- cookie, cookielen);
-
- *p++ = DTLS1_MT_HELLO_VERIFY_REQUEST;
-
- /* Message length */
- l2n3(msglen, p);
-
- /* Message sequence number is always 0 for a HelloVerifyRequest */
- s2n(0, p);
-
- /*
- * We never fragment a HelloVerifyRequest, so fragment offset is 0
- * and fragment length is message length
- */
- l2n3(0, p);
- l2n3(msglen, p);
-
- /* Set reclen equal to length of whole handshake message */
- reclen = msglen + DTLS1_HM_HEADER_LENGTH;
-
- /* Add the record header */
- p = buf;
-
- *(p++) = SSL3_RT_HANDSHAKE;
/*
* Special case: for hello verify request, client version 1.0 and we
* haven't decided which version to use yet send back using version
* 1.0 header: otherwise some clients will ignore it.
*/
- if (s->method->version == DTLS_ANY_VERSION) {
- *(p++) = DTLS1_VERSION >> 8;
- *(p++) = DTLS1_VERSION & 0xff;
- } else {
- *(p++) = s->version >> 8;
- *(p++) = s->version & 0xff;
+ version = (s->method->version == DTLS_ANY_VERSION) ? DTLS1_VERSION
+ : s->version;
+
+ /* Construct the record and message headers */
+ if (!WPACKET_init(&wpkt, s->init_buf)
+ || !WPACKET_put_bytes_u8(&wpkt, SSL3_RT_HANDSHAKE)
+ || !WPACKET_put_bytes_u16(&wpkt, version)
+ /*
+ * Record sequence number is always the same as in the
+ * received ClientHello
+ */
+ || !WPACKET_memcpy(&wpkt, seq, SEQ_NUM_SIZE)
+ /* End of record, start sub packet for message */
+ || !WPACKET_start_sub_packet_u16(&wpkt)
+ /* Message type */
+ || !WPACKET_put_bytes_u8(&wpkt,
+ DTLS1_MT_HELLO_VERIFY_REQUEST)
+ /*
+ * Message length - doesn't follow normal TLS convention:
+ * the length isn't the last thing in the message header.
+ * We'll need to fill this in later when we know the
+ * length. Set it to zero for now
+ */
+ || !WPACKET_put_bytes_u24(&wpkt, 0)
+ /*
+ * Message sequence number is always 0 for a
+ * HelloVerifyRequest
+ */
+ || !WPACKET_put_bytes_u16(&wpkt, 0)
+ /*
+ * We never fragment a HelloVerifyRequest, so fragment
+ * offset is 0
+ */
+ || !WPACKET_put_bytes_u24(&wpkt, 0)
+ /*
+ * Fragment length is the same as message length, but
+ * this *is* the last thing in the message header so we
+ * can just start a sub-packet. No need to come back
+ * later for this one.
+ */
+ || !WPACKET_start_sub_packet_u24(&wpkt)
+ /* Create the actual HelloVerifyRequest body */
+ || !dtls_raw_hello_verify_request(&wpkt, cookie, cookielen)
+ /* Close message body */
+ || !WPACKET_close(&wpkt)
+ /* Close record body */
+ || !WPACKET_close(&wpkt)
+ || !WPACKET_get_total_written(&wpkt, &wreclen)
+ || !WPACKET_finish(&wpkt)) {
+ SSLerr(SSL_F_DTLSV1_LISTEN, ERR_R_INTERNAL_ERROR);
+ WPACKET_cleanup(&wpkt);
+ /* This is fatal */
+ return -1;
}
/*
- * Record sequence number is always the same as in the received
- * ClientHello
+ * Fix up the message len in the message header. Its the same as the
+ * fragment len which has been filled in by WPACKET, so just copy
+ * that. Destination for the message len is after the record header
+ * plus one byte for the message content type. The source is the
+ * last 3 bytes of the message header
*/
- memcpy(p, seq, SEQ_NUM_SIZE);
- p += SEQ_NUM_SIZE;
-
- /* Length */
- s2n(reclen, p);
-
- /*
- * Set reclen equal to length of whole record including record
- * header
- */
- reclen += DTLS1_RT_HEADER_LENGTH;
+ memcpy(&buf[DTLS1_RT_HEADER_LENGTH + 1],
+ &buf[DTLS1_RT_HEADER_LENGTH + DTLS1_HM_HEADER_LENGTH - 3],
+ 3);
if (s->msg_callback)
s->msg_callback(1, 0, SSL3_RT_HEADER, buf,
DTLS1_RT_HEADER_LENGTH, s, s->msg_callback_arg);
-
if ((tmpclient = BIO_ADDR_new()) == NULL) {
SSLerr(SSL_F_DTLSV1_LISTEN, ERR_R_MALLOC_FAILURE);
goto end;
BIO_ADDR_free(tmpclient);
tmpclient = NULL;
- if (BIO_write(wbio, buf, reclen) < (int)reclen) {
+ if (BIO_write(wbio, buf, wreclen) < (int)wreclen) {
if (BIO_should_retry(wbio)) {
/*
* Non-blocking IO...but we're stateless, so we're just
*/
ossl_statem_set_hello_verify_done(s);
- /* Some BIOs may not support this. If we fail we clear the client address */
+ /*
+ * Some BIOs may not support this. If we fail we clear the client address
+ */
if (BIO_dgram_get_peer(rbio, client) <= 0)
BIO_ADDR_clear(client);
ret = 1;
clearpkt = 0;
-end:
+ end:
BIO_ADDR_free(tmpclient);
BIO_ctrl(SSL_get_rbio(s), BIO_CTRL_DGRAM_SET_PEEK_MODE, 0, NULL);
if (clearpkt) {
}
#endif
-static int dtls1_set_handshake_header(SSL *s, int htype, unsigned long len)
-{
- dtls1_set_message_header(s, htype, len, 0, len);
- s->init_num = (int)len + DTLS1_HM_HEADER_LENGTH;
- s->init_off = 0;
- /* Buffer the message to handle re-xmits */
-
- if (!dtls1_buffer_message(s, 0))
- return 0;
-
- return 1;
-}
-
static int dtls1_handshake_write(SSL *s)
{
return dtls1_do_write(s, SSL3_RT_HANDSHAKE);
#ifndef OPENSSL_NO_HEARTBEATS
-#define HEARTBEAT_SIZE(payload, padding) ( \
+# define HEARTBEAT_SIZE(payload, padding) ( \
1 /* heartbeat type */ + \
2 /* heartbeat length */ + \
(payload) + (padding))
-#define HEARTBEAT_SIZE_STD(payload) HEARTBEAT_SIZE(payload, 16)
+# define HEARTBEAT_SIZE_STD(payload) HEARTBEAT_SIZE(payload, 16)
int dtls1_process_heartbeat(SSL *s, unsigned char *p, unsigned int length)
{
if (ret >= 0) {
if (s->msg_callback)
s->msg_callback(1, s->version, DTLS1_RT_HEARTBEAT,
- buf, size,
- s, s->msg_callback_arg);
+ buf, size, s, s->msg_callback_arg);
dtls1_start_timer(s);
s->tlsext_hb_pending = 1;