$! byer@mail.all-net.net
$!
$! Changes by Richard Levitte <richard@levitte.org>
+$! Zoltan Arpadffy <zoli@polarhome.com>
$!
$! This procedure creates the SSL libraries of "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB"
$! "[.xxx.EXE.SSL]LIBSSL.OLB"
-$! The "xxx" denotes the machine architecture of AXP or VAX.
+$! The "xxx" denotes the machine architecture of ALPHA, IA64 or VAX.
$!
$! This procedures accepts two command line options listed below.
$!
-$! Specify one of the following build options for P1.
+$! P1 specifies one of the following build options:
$!
$! ALL Just build "everything".
-$! CONFIG Just build the "[.CRYPTO]OPENSSLCONF.H" file.
-$! BUILDINF Just build the "[.CRYPTO]BUILDINF.H" file.
+$! CONFIG Just build the "[.CRYPTO._xxx]OPENSSLCONF.H" file.
+$! BUILDINF Just build the "[.CRYPTO._xxx]BUILDINF.H" file.
$! SOFTLINKS Just fix the Unix soft links.
$! BUILDALL Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done.
$! CRYPTO Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
$! APPS Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
$! ENGINES Just build the "[.xxx.EXE.ENGINES]" application programs for OpenSSL.
$!
+$! P2, if defined, specifies the C pointer size. Ignored on VAX.
+$! ("64=ARGV" gives more efficient code with HP C V7.3 or newer.)
+$! Supported values are:
$!
-$! P2 is ignored (it was used to denote if RSAref should be used or not,
-$! and is simply kept so surrounding scripts don't get confused)
+$! "" Compile with default (/NOPOINTER_SIZE).
+$! 32 Compile with /POINTER_SIZE=32 (SHORT).
+$! 64 Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV]).
+$! (Automatically select ARGV if compiler supports it.)
+$! 64= Compile with /POINTER_SIZE=64 (LONG).
+$! 64=ARGV Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV).
$!
-$! Speficy DEBUG or NODEBUG as P3 to compile with or without debugging
-$! information.
+$! P3 specifies DEBUG or NODEBUG, to compile with or without debugging
+$! information.
$!
-$! Specify which compiler at P4 to try to compile under.
+$! P4 specifies which compiler to try to compile under.
$!
$! VAXC For VAX C.
$! DECC For DEC C.
$! LINK To only link the programs from existing object files.
$! (not yet implemented)
$!
-$! If you don't speficy a compiler, it will try to determine which
+$! If you don't specify a compiler, it will try to determine which
$! "C" compiler to use.
$!
$! P5, if defined, sets a TCP/IP library to use, through one of the following
$! use at build time (this works with DEC C). This is
$! the default.
$!
-$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
+$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up).
$!
+$! P7, if defined, specifies a directory where ZLIB files (zlib.h,
+$! libz.olb) may be found. Optionally, a non-default object library
+$! name may be included ("dev:[dir]libz_64.olb", for example).
+$!
+$!
+$! Announce/identify.
+$!
+$ proc = f$environment( "procedure")
+$ write sys$output "@@@ "+ -
+ f$parse( proc, , , "name")+ f$parse( proc, , , "type")
+$!
+$ DEF_ORIG = F$ENVIRONMENT( "DEFAULT")
+$ ON ERROR THEN GOTO TIDY
+$ ON CONTROL_C THEN GOTO TIDY
$!
$! Check if we're in a batch job, and make sure we get to
$! the directory this script is in
$ SET DEF 'COMPATH'
$ ENDIF
$!
-$! Check Which Architecture We Are Using.
+$! Check What Architecture We Are Using.
$!
-$ IF (F$GETSYI("CPU").GE.128)
+$ IF (F$GETSYI("CPU").LT.128)
$ THEN
$!
-$! The Architecture Is AXP.
+$! The Architecture Is VAX.
$!
-$ ARCH := AXP
+$ ARCH = "VAX"
$!
$! Else...
$!
$ ELSE
$!
-$! The Architecture Is VAX.
+$! The Architecture Is Alpha, IA64 or whatever comes in the future.
$!
-$ ARCH := VAX
+$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
+$ IF (ARCH .EQS. "") THEN ARCH = "UNK"
$!
$! End The Architecture Check.
$!
$ ENDIF
$!
+$ ARCHD = ARCH
+$ LIB32 = "32"
+$ POINTER_SIZE = ""
+$!
+$! Get VMS version.
+$!
+$ VMS_VERSION = f$edit( f$getsyi( "VERSION"), "TRIM")
+$!
$! Check To Make Sure We Have Valid Command Line Parameters.
$!
$ GOSUB CHECK_OPTIONS
$!
$! Time To EXIT.
$!
-$ EXIT
+$ GOTO TIDY
$!
-$! Rebuild The "[.CRYPTO]OPENSSLCONF.H" file.
+$! Rebuild The [.CRYPTO._xxx]OPENSSLCONF.H" file.
$!
$ CONFIG:
$!
-$! Tell The User We Are Creating The [.CRYPTO]OPENSSLCONF.H File.
+$! Tell The User We Are Creating The [.CRYPTO._xxx]OPENSSLCONF.H File.
+$!
+$ WRITE SYS$OUTPUT "Creating [.CRYPTO.''ARCHD']OPENSSLCONF.H Include File."
+$!
+$! First, make sure the directory exists.
$!
-$ WRITE SYS$OUTPUT "Creating [.CRYPTO]OPENSSLCONF.H Include File."
+$ IF F$PARSE("SYS$DISK:[.CRYPTO.''ARCHD']") .EQS. "" THEN -
+ CREATE/DIRECTORY SYS$DISK:[.CRYPTO.'ARCHD']
+$!
+$! Different tar/UnZip versions/option may have named the file differently
+$ IF F$SEARCH("[.crypto]opensslconf.h_in") .NES. ""
+$ THEN
+$ OPENSSLCONF_H_IN = "[.crypto]opensslconf.h_in"
+$ ELSE
+$ IF F$SEARCH( "[.crypto]opensslconf_h.in") .NES. ""
+$ THEN
+$ OPENSSLCONF_H_IN = "[.crypto]opensslconf_h.in"
+$ ELSE
+$ ! For ODS-5
+$ IF F$SEARCH( "[.crypto]opensslconf.h.in") .NES. ""
+$ THEN
+$ OPENSSLCONF_H_IN = "[.crypto]opensslconf.h.in"
+$ ELSE
+$ WRITE SYS$ERROR "Couldn't find a [.crypto]opensslconf.h.in. Exiting!"
+$ $STATUS = %X00018294 ! "%RMS-F-FNF, file not found".
+$ GOTO TIDY
+$ ENDIF
+$ ENDIF
+$ ENDIF
$!
-$! Create The [.CRYPTO]OPENSSLCONF.H File.
+$! Create The [.CRYPTO._xxx]OPENSSLCONF.H File.
+$! Make sure it has the right format.
$!
-$ OPEN/WRITE H_FILE SYS$DISK:[.CRYPTO]OPENSSLCONF.H
+$ OSCH_NAME = "SYS$DISK:[.CRYPTO.''ARCHD']OPENSSLCONF.H"
+$ CREATE /FDL=SYS$INPUT: 'OSCH_NAME'
+RECORD
+ FORMAT stream_lf
+$ OPEN /APPEND H_FILE 'OSCH_NAME'
$!
-$! Write The [.CRYPTO]OPENSSLCONF.H File.
+$! Write The [.CRYPTO._xxx]OPENSSLCONF.H File.
$!
$ WRITE H_FILE "/* This file was automatically built using makevms.com */"
-$ WRITE H_FILE "/* and [.CRYPTO]OPENSSLCONF.H_IN */"
-$
+$ WRITE H_FILE "/* and ''OPENSSLCONF_H_IN' */"
$!
$! Write a few macros that indicate how this system was built.
$!
$ WRITE H_FILE "#ifndef OPENSSL_SYS_VMS"
$ WRITE H_FILE "# define OPENSSL_SYS_VMS"
$ WRITE H_FILE "#endif"
-$ CONFIG_LOGICALS := NO_ASM,NO_RSA,NO_DSA,NO_DH,NO_MD2,NO_MD5,NO_RIPEMD,WHRLPOOL,-
- NO_SHA,NO_SHA0,NO_SHA1,NO_DES/NO_MDC2;NO_MDC2,NO_RC2,NO_RC4,NO_RC5,-
- NO_IDEA,NO_BF,NO_CAST,NO_CAMELLIA,NO_HMAC,NO_SSL2
+$
+$! One of the best way to figure out what the list should be is to do
+$! the following on a Unix system:
+$! grep OPENSSL_NO_ crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq
+$! For that reason, the list will also always end up in alphabetical order
+$ CONFIG_LOGICALS := AES,-
+ ASM,INLINE_ASM,-
+ BF,-
+ BIO,-
+ BUFFER,-
+ BUF_FREELISTS,-
+ CAMELLIA,-
+ CAST,-
+ CMS,-
+ COMP,-
+ DEPRECATED,-
+ DES,-
+ DGRAM,-
+ DH,-
+ DSA,-
+ EC,-
+ EC2M,-
+ ECDH,-
+ ECDSA,-
+ EC_NISTP_64_GCC_128,-
+ ENGINE,-
+ ERR,-
+ EVP,-
+ FP_API,-
+ GMP,-
+ GOST,-
+ HASH_COMP,-
+ HMAC,-
+ IDEA,-
+ JPAKE,-
+ KRB5,-
+ LHASH,-
+ MD2,-
+ MD4,-
+ MD5,-
+ MDC2,-
+ NEXTPROTONEG,-
+ OCSP,-
+ PSK,-
+ RC2,-
+ RC4,-
+ RC5,-
+ RFC3779,-
+ RIPEMD,-
+ RSA,-
+ SEED,-
+ SHA,-
+ SHA0,-
+ SHA1,-
+ SHA256,-
+ SHA512,-
+ SOCK,-
+ SRP,-
+ SSL2,-
+ SSL_INTERN,-
+ STACK,-
+ STATIC_ENGINE,-
+ STDIO,-
+ STORE,-
+ TLSEXT,-
+ WHIRLPOOL,-
+ X509
+$! Add a few that we know about
+$ CONFIG_LOGICALS := 'CONFIG_LOGICALS',-
+ THREADS
+$! The following rules, which dictate how some algorithm choices affect
+$! others, are picked from Configure.
+$! Quick syntax:
+$! list = item[ ; list]
+$! item = algos / dependents
+$! algos = algo [, algos]
+$! dependents = dependent [, dependents]
+$! When a list of algos is specified in one item, it means that they must
+$! all be disabled for the rule to apply.
+$! When a list of dependents is specified in one item, it means that they
+$! will all be disabled if the rule applies.
+$! Rules are checked sequentially. If a rule disables an algorithm, it will
+$! affect all following rules that depend on that algorithm being disabled.
+$! To force something to be enabled or disabled, have no algorithms in the
+$! algos part.
+$ CONFIG_DISABLE_RULES := RIJNDAEL/AES;-
+ DES/MDC2;-
+ EC/ECDSA,ECDH;-
+ MD5/SSL2,SSL3,TLS1;-
+ SHA/SSL3,TLS1;-
+ RSA/SSL2;-
+ RSA,DSA/SSL2;-
+ DH/SSL3,TLS1;-
+ TLS1/TLSEXT;-
+ EC/GOST;-
+ DSA/GOST;-
+ DH/GOST;-
+ /STATIC_ENGINE;-
+ /KRB5;-
+ /EC_NISTP_64_GCC_128
+$ CONFIG_ENABLE_RULES := ZLIB_DYNAMIC/ZLIB;-
+ /THREADS
+$
+$! Architecture specific rule addtions
+$ IF ARCH .EQS. "VAX"
+$ THEN
+$ ! Disable algorithms that require 64-bit integers in C
+$ CONFIG_DISABLE_RULES = CONFIG_DISABLE_RULES + -
+ ";/GOST" + -
+ ";/WHIRLPOOL"
+$ ENDIF
+$
$ CONFIG_LOG_I = 0
-$ CONFIG_LOG_LOOP:
-$ CONFIG_LOG_E1 = F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS)
+$ CONFIG_LOG_LOOP1:
+$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")
$ CONFIG_LOG_I = CONFIG_LOG_I + 1
-$ IF CONFIG_LOG_E1 .EQS. "" THEN GOTO CONFIG_LOG_LOOP
-$ IF CONFIG_LOG_E1 .EQS. "," THEN GOTO CONFIG_LOG_LOOP_END
-$ CONFIG_LOG_E2 = F$EDIT(CONFIG_LOG_E1,"TRIM")
-$ CONFIG_LOG_E1 = F$ELEMENT(0,";",CONFIG_LOG_E2)
-$ CONFIG_LOG_E2 = F$ELEMENT(1,";",CONFIG_LOG_E2)
-$ CONFIG_LOG_E0 = F$ELEMENT(0,"/",CONFIG_LOG_E1)
-$ CONFIG_LOG_E1 = F$ELEMENT(1,"/",CONFIG_LOG_E1)
-$ IF F$TRNLNM("OPENSSL_"+CONFIG_LOG_E0)
+$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP1
+$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP1_END
+$ IF F$TRNLNM("OPENSSL_NO_"+CONFIG_LOG_E)
$ THEN
-$ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E0
-$ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E0
-$ WRITE H_FILE "#endif"
-$ IF CONFIG_LOG_E1 .NES. "/"
+$ CONFIG_DISABLED_'CONFIG_LOG_E' := YES
+$ CONFIG_ENABLED_'CONFIG_LOG_E' := NO
+$ CONFIG_CHANGED_'CONFIG_LOG_E' := YES
+$ ELSE
+$ CONFIG_DISABLED_'CONFIG_LOG_E' := NO
+$ CONFIG_ENABLED_'CONFIG_LOG_E' := YES
+$ ! Because all algorithms are assumed enabled by default
+$ CONFIG_CHANGED_'CONFIG_LOG_E' := NO
+$ ENDIF
+$ GOTO CONFIG_LOG_LOOP1
+$ CONFIG_LOG_LOOP1_END:
+$
+$! Apply cascading disable rules
+$ CONFIG_DISABLE_I = 0
+$ CONFIG_DISABLE_LOOP0:
+$ CONFIG_DISABLE_E = F$EDIT(F$ELEMENT(CONFIG_DISABLE_I,";", -
+ CONFIG_DISABLE_RULES),"TRIM")
+$ CONFIG_DISABLE_I = CONFIG_DISABLE_I + 1
+$ IF CONFIG_DISABLE_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP0
+$ IF CONFIG_DISABLE_E .EQS. ";" THEN GOTO CONFIG_DISABLE_LOOP0_END
+$
+$ CONFIG_DISABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_DISABLE_E),"TRIM")
+$ CONFIG_DISABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_DISABLE_E),"TRIM")
+$ TO_DISABLE := YES
+$ CONFIG_ALGO_I = 0
+$ CONFIG_DISABLE_LOOP1:
+$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",", -
+ CONFIG_DISABLE_ALGOS),"TRIM")
+$ CONFIG_ALGO_I = CONFIG_ALGO_I + 1
+$ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP1
+$ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP1_END
+$ IF F$TYPE(CONFIG_DISABLED_'CONFIG_ALGO_E') .EQS. ""
$ THEN
-$ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E1
-$ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E1
-$ WRITE H_FILE "#endif"
+$ TO_DISABLE := NO
+$ ELSE
+$ IF .NOT. CONFIG_DISABLED_'CONFIG_ALGO_E' THEN TO_DISABLE := NO
$ ENDIF
-$ ELSE
-$ IF CONFIG_LOG_E2 .NES. ";"
+$ GOTO CONFIG_DISABLE_LOOP1
+$ CONFIG_DISABLE_LOOP1_END:
+$
+$ IF TO_DISABLE
+$ THEN
+$ CONFIG_DEPENDENT_I = 0
+$ CONFIG_DISABLE_LOOP2:
+$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",", -
+ CONFIG_DISABLE_DEPENDENTS),"TRIM")
+$ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1
+$ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP2
+$ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP2_END
+$ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := YES
+$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := NO
+$ ! Better not to assume defaults at this point...
+$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
+$ WRITE SYS$ERROR -
+ "''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'"
+$ GOTO CONFIG_DISABLE_LOOP2
+$ CONFIG_DISABLE_LOOP2_END:
+$ ENDIF
+$ GOTO CONFIG_DISABLE_LOOP0
+$ CONFIG_DISABLE_LOOP0_END:
+$
+$! Apply cascading enable rules
+$ CONFIG_ENABLE_I = 0
+$ CONFIG_ENABLE_LOOP0:
+$ CONFIG_ENABLE_E = F$EDIT(F$ELEMENT(CONFIG_ENABLE_I,";", -
+ CONFIG_ENABLE_RULES),"TRIM")
+$ CONFIG_ENABLE_I = CONFIG_ENABLE_I + 1
+$ IF CONFIG_ENABLE_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP0
+$ IF CONFIG_ENABLE_E .EQS. ";" THEN GOTO CONFIG_ENABLE_LOOP0_END
+$
+$ CONFIG_ENABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_ENABLE_E),"TRIM")
+$ CONFIG_ENABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_ENABLE_E),"TRIM")
+$ TO_ENABLE := YES
+$ CONFIG_ALGO_I = 0
+$ CONFIG_ENABLE_LOOP1:
+$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",", -
+ CONFIG_ENABLE_ALGOS),"TRIM")
+$ CONFIG_ALGO_I = CONFIG_ALGO_I + 1
+$ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP1
+$ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP1_END
+$ IF F$TYPE(CONFIG_ENABLED_'CONFIG_ALGO_E') .EQS. ""
$ THEN
-$ IF F$TRNLNM("OPENSSL_"+CONFIG_LOG_E2)
-$ THEN
-$ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E2
-$ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E2
-$ WRITE H_FILE "#endif"
-$ ENDIF
+$ TO_ENABLE := NO
+$ ELSE
+$ IF .NOT. CONFIG_ENABLED_'CONFIG_ALGO_E' THEN TO_ENABLE := NO
$ ENDIF
+$ GOTO CONFIG_ENABLE_LOOP1
+$ CONFIG_ENABLE_LOOP1_END:
+$
+$ IF TO_ENABLE
+$ THEN
+$ CONFIG_DEPENDENT_I = 0
+$ CONFIG_ENABLE_LOOP2:
+$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",", -
+ CONFIG_ENABLE_DEPENDENTS),"TRIM")
+$ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1
+$ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP2
+$ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP2_END
+$ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := NO
+$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := YES
+$ ! Better not to assume defaults at this point...
+$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
+$ WRITE SYS$ERROR -
+ "''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'"
+$ GOTO CONFIG_ENABLE_LOOP2
+$ CONFIG_ENABLE_LOOP2_END:
$ ENDIF
-$ GOTO CONFIG_LOG_LOOP
-$ CONFIG_LOG_LOOP_END:
-$ WRITE H_FILE "#ifndef OPENSSL_NO_STATIC_ENGINE"
-$ WRITE H_FILE "# define OPENSSL_NO_STATIC_ENGINE"
-$ WRITE H_FILE "#endif"
-$ WRITE H_FILE "#ifndef OPENSSL_THREADS"
-$ WRITE H_FILE "# define OPENSSL_THREADS"
-$ WRITE H_FILE "#endif"
-$ WRITE H_FILE "#ifndef OPENSSL_NO_KRB5"
-$ WRITE H_FILE "# define OPENSSL_NO_KRB5"
-$ WRITE H_FILE "#endif"
-$ WRITE H_FILE ""
-$!
-$! Different tar version may have named the file differently
-$ IF F$SEARCH("[.CRYPTO]OPENSSLCONF.H_IN") .NES. ""
-$ THEN
-$ TYPE [.CRYPTO]OPENSSLCONF.H_IN /OUTPUT=H_FILE:
-$ ELSE
-$ IF F$SEARCH("[.CRYPTO]OPENSSLCONF_H.IN") .NES. ""
+$ GOTO CONFIG_ENABLE_LOOP0
+$ CONFIG_ENABLE_LOOP0_END:
+$
+$! Write to the configuration
+$ CONFIG_LOG_I = 0
+$ CONFIG_LOG_LOOP2:
+$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")
+$ CONFIG_LOG_I = CONFIG_LOG_I + 1
+$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP2
+$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP2_END
+$ IF CONFIG_CHANGED_'CONFIG_LOG_E'
$ THEN
-$ TYPE [.CRYPTO]OPENSSLCONF_H.IN /OUTPUT=H_FILE:
-$ ELSE
-$ ! For ODS-5
-$ IF F$SEARCH("[.CRYPTO]OPENSSLCONF.H.IN") .NES. ""
+$ IF CONFIG_DISABLED_'CONFIG_LOG_E'
$ THEN
-$ TYPE [.CRYPTO]OPENSSLCONF.H.IN /OUTPUT=H_FILE:
+$ WRITE H_FILE "#ifndef OPENSSL_NO_",CONFIG_LOG_E
+$ WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E
+$ WRITE H_FILE "#endif"
$ ELSE
-$ WRITE SYS$ERROR "Couldn't find a [.CRYPTO]OPENSSLCONF.H_IN. Exiting!"
-$ EXIT 0
+$ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E
+$ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E
+$ WRITE H_FILE "#endif"
$ ENDIF
$ ENDIF
-$ ENDIF
-$ IF ARCH .EQS. "AXP"
+$ GOTO CONFIG_LOG_LOOP2
+$ CONFIG_LOG_LOOP2_END:
+$!
+$ WRITE H_FILE ""
+$ WRITE H_FILE "/* 2011-02-23 SMS."
+$ WRITE H_FILE " * On VMS (V8.3), setvbuf() doesn't support a 64-bit"
+$ WRITE H_FILE " * ""in"" pointer, and the help says:"
+$ WRITE H_FILE " * Please note that the previously documented"
+$ WRITE H_FILE " * value _IONBF is not supported."
+$ WRITE H_FILE " * So, skip it on VMS."
+$ WRITE H_FILE " */"
+$ WRITE H_FILE "#define OPENSSL_NO_SETVBUF_IONBF"
+$ WRITE H_FILE "/* STCP support comes with TCPIP 5.7 ECO 2 "
+$ WRITE H_FILE " * enable on newer systems / 2012-02-24 arpadffy */"
+$ WRITE H_FILE "#define OPENSSL_NO_SCTP"
+$ WRITE H_FILE ""
+$!
+$! Add in the common "crypto/opensslconf.h.in".
+$!
+$ TYPE 'OPENSSLCONF_H_IN' /OUTPUT=H_FILE:
+$!
+$ IF ARCH .NES. "VAX"
$ THEN
$!
-$! Write the Alpha specific data
+$! Write the non-VAX specific data
$!
$ WRITE H_FILE "#if defined(HEADER_RC4_H)"
$ WRITE H_FILE "#undef RC4_INT"
$ WRITE H_FILE "#undef SIXTEEN_BIT"
$ WRITE H_FILE "#undef EIGHT_BIT"
$ WRITE H_FILE "#endif"
-$
+$!
+$! Oddly enough, the following symbol is tested in crypto/sha/sha512.c
+$! before sha.h gets included (and HEADER_SHA_H defined), so we will not
+$! protect this one...
+$ WRITE H_FILE "#undef OPENSSL_NO_SHA512"
+$ WRITE H_FILE "#define OPENSSL_NO_SHA512"
+$!
$ WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"
$ WRITE H_FILE "#define OPENSSL_EXPORT_VAR_AS_FUNCTION"
$!
$!
$ ENDIF
$!
-$! Close the [.CRYPTO]OPENSSLCONF.H file
+$! Close the [.CRYPTO._xxx]OPENSSLCONF.H file
$!
$ CLOSE H_FILE
$!
+$! Purge The [.CRYPTO._xxx]OPENSSLCONF.H file
+$!
+$ PURGE SYS$DISK:[.CRYPTO.'ARCHD']OPENSSLCONF.H
+$!
$! That's All, Time To RETURN.
$!
$ RETURN
$!
-$! Rebuild The "[.CRYPTO]BUILDINF.H" file.
+$! Rebuild The "[.CRYPTO._xxx]BUILDINF.H" file.
$!
$ BUILDINF:
$!
-$! Tell The User We Are Creating The [.CRYPTO]BUILDINF.H File.
+$! Tell The User We Are Creating The [.CRYPTO._xxx]BUILDINF.H File.
$!
-$ WRITE SYS$OUTPUT "Creating [.CRYPTO]BUILDINF.H Include File."
+$ WRITE SYS$OUTPUT "Creating [.CRYPTO.''ARCHD']BUILDINF.H Include File."
$!
-$! Create The [.CRYPTO]BUILDINF.H File.
+$! Create The [.CRYPTO._xxx]BUILDINF.H File.
$!
-$ OPEN/WRITE H_FILE SYS$DISK:[.CRYPTO]BUILDINF.H
+$ BIH_NAME = "SYS$DISK:[.CRYPTO.''ARCHD']BUILDINF.H"
+$ CREATE /FDL=SYS$INPUT: 'BIH_NAME'
+RECORD
+ FORMAT stream_lf
+$!
+$ OPEN /APPEND H_FILE 'bih_name'
$!
$! Get The Current Date & Time.
$!
$ TIME = F$TIME()
$!
-$! Write The [.CRYPTO]BUILDINF.H File.
-$!
-$ WRITE H_FILE "#define CFLAGS """" /* Not filled in for now */"
-$ WRITE H_FILE "#define PLATFORM ""VMS"""
+$! Write The [.CRYPTO._xxx]BUILDINF.H File.
+$!
+$ CFLAGS = ""
+$ if (POINTER_SIZE .nes. "")
+$ then
+$ CFLAGS = CFLAGS+ "/POINTER_SIZE=''POINTER_SIZE'"
+$ endif
+$ if (ZLIB .nes. "")
+$ then
+$ if (CFLAGS .nes. "") then CFLAGS = CFLAGS+ " "
+$ CFLAGS = CFLAGS+ "/DEFINE=ZLIB"
+$ endif
+$!
+$ WRITE H_FILE "#define CFLAGS ""''CFLAGS'"""
+$ WRITE H_FILE "#define PLATFORM ""VMS ''ARCHD' ''VMS_VERSION'"""
$ WRITE H_FILE "#define DATE ""''TIME'"" "
$!
-$! Close The [.CRYPTO]BUILDINF.H File.
+$! Close The [.CRYPTO._xxx]BUILDINF.H File.
$!
$ CLOSE H_FILE
$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Copy a lot of files around.
-$!
-$ SOFTLINKS:
-$!
-$! Tell The User We Are Partly Rebuilding The [.APPS] Directory.
-$!
-$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C', '[.APPS]MD5.C' And '[.APPS]RMD160.C' Files."
-$!
-$ DELETE SYS$DISK:[.APPS]MD4.C;*,MD5.C;*,RMD160.C;*
-$!
-$! Copy MD4.C from [.CRYPTO.MD4] into [.APPS]
-$!
-$ COPY SYS$DISK:[.CRYPTO.MD4]MD4.C SYS$DISK:[.APPS]
-$!
-$! Copy MD5.C from [.CRYPTO.MD5] into [.APPS]
+$! Purge The [.CRYPTO._xxx]BUILDINF.H File.
$!
-$ COPY SYS$DISK:[.CRYPTO.MD5]MD5.C SYS$DISK:[.APPS]
+$ PURGE SYS$DISK:[.CRYPTO.'ARCHD']BUILDINF.H
$!
-$! Copy RMD160.C from [.CRYPTO.RIPEMD] into [.APPS]
+$! Delete [.CRYPTO]BUILDINF.H File, as there might be some residue from Unix.
$!
-$ COPY SYS$DISK:[.CRYPTO.RIPEMD]RMD160.C SYS$DISK:[.APPS]
+$ IF F$SEARCH("[.CRYPTO]BUILDINF.H") .NES. "" THEN -
+ DELETE SYS$DISK:[.CRYPTO]BUILDINF.H;*
$!
-$! Tell The User We Are Partly Rebuilding The [.TEST] Directory.
-$!
-$ WRITE SYS$OUTPUT "Rebuilding The '[.TEST]*.C' Files."
-$!
-$! First, We Have To "Rebuild" The "[.TEST]" Directory, So Delete
-$! All The "C" Files That Are Currently There Now.
-$!
-$ DELETE SYS$DISK:[.TEST]*.C;*
-$ DELETE SYS$DISK:[.TEST]EVPTESTS.TXT;*
-$!
-$! Copy all the *TEST.C files from [.CRYPTO...] into [.TEST]
-$!
-$ COPY SYS$DISK:[.CRYPTO.*]%*TEST.C SYS$DISK:[.TEST]
-$ COPY SYS$DISK:[.CRYPTO.SHA]SHA%%%T.C SYS$DISK:[.TEST]
-$ COPY SYS$DISK:[.CRYPTO.EVP]EVPTESTS.TXT SYS$DISK:[.TEST]
-$!
-$! Copy all the *TEST.C files from [.SSL...] into [.TEST]
-$!
-$ COPY SYS$DISK:[.SSL]%*TEST.C SYS$DISK:[.TEST]
+$! That's All, Time To RETURN.
$!
-$! Tell The User We Are Rebuilding The [.INCLUDE.OPENSSL] Directory.
+$ RETURN
$!
-$ WRITE SYS$OUTPUT "Rebuilding The '[.INCLUDE.OPENSSL]' Directory."
+$! Copy a lot of files around.
$!
-$! First, make sure the directory exists
+$ SOFTLINKS:
$!
-$ IF F$PARSE("SYS$DISK:[.INCLUDE.OPENSSL]") .EQS. "" THEN -
- CREATE/DIRECTORY SYS$DISK:[.INCLUDE.OPENSSL]
+$!!!! Tell The User We Are Partly Rebuilding The [.APPS] Directory.
+$!!!!
+$!!! WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C', '[.APPS]MD5.C' And '[.APPS]RD160.C' Files."
+$!!!!
+$!!! DELETE SYS$DISK:[.APPS]MD4.C;*,MD5.C;*,RMD160.C;*
+$!!!!
+$!!!! Copy MD4.C from [.CRYPTO.MD4] into [.APPS]
+$!!!!
+$!!! COPY SYS$DISK:[.CRYPTO.MD4]MD4.C SYS$DISK:[.APPS]
+$!!!!
+$!!!! Copy MD5.C from [.CRYPTO.MD5] into [.APPS]
+$!!!! Tell The User We Are Rebuilding The [.include.openssl] Directory.
+$!!!!
+$!!!! Copy RMD160.C from [.CRYPTO.RIPEMD] into [.APPS]
+$!!!!
+$!!! COPY SYS$DISK:[.CRYPTO.RIPEMD]RMD160.C SYS$DISK:[.APPS]
+$!
+$! Ensure that the [.include.openssl] directory contains a full set of
+$! real header files. The distribution kit may have left real or fake
+$! symlinks there. Rather than think about what's there, simply delete
+$! the destination files (fake or real symlinks) before copying the real
+$! header files in. (Copying a real header file onto a real symlink
+$! merely duplicates the real header file at its source.)
+$!
+$! Tell The User We Are Rebuilding The [.include.openssl] Directory.
+$!
+$ WRITE SYS$OUTPUT "Rebuilding The '[.include.openssl]' Directory."
+$!
+$! First, make sure the directory exists. If it did exist, delete all
+$! the existing header files (or fake or real symlinks).
+$!
+$ if f$parse( "sys$disk:[.include.openssl]") .eqs. ""
+$ then
+$ create /directory sys$disk:[.include.openssl]
+$ else
+$ delete sys$disk:[.include.openssl]*.h;*
+$ endif
$!
$! Copy All The ".H" Files From The Main Directory.
$!
$ EXHEADER := e_os2.h
-$ COPY 'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
+$ copy 'exheader' sys$disk:[.include.openssl]
$!
$! Copy All The ".H" Files From The [.CRYPTO] Directory Tree.
$!
-$ SDIRS := ,-
- OBJECTS,-
- MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,WHRLPOOL,-
- DES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,-
- BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,AES,-
- BUFFER,BIO,STACK,LHASH,RAND,ERR,-
- EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,-
- STORE,PQUEUE,TS
-$ EXHEADER_ := crypto.h,opensslv.h,opensslconf.h,ebcdic.h,symhacks.h,ossl_typ.h
-$ EXHEADER_OBJECTS := objects.h,obj_mac.h
+$ SDIRS := , -
+ 'ARCHD', -
+ OBJECTS, -
+ MD2, MD4, MD5, SHA, MDC2, HMAC, RIPEMD, WHRLPOOL, -
+ DES, AES, RC2, RC4, RC5, IDEA, BF, CAST, CAMELLIA, SEED, MODES, -
+ BN, EC, RSA, DSA, ECDSA, DH, ECDH, DSO, ENGINE, -
+ BUFFER, BIO, STACK, LHASH, RAND, ERR, -
+ EVP, ASN1, PEM, X509, X509V3, CONF, TXT_DB, PKCS7, PKCS12, -
+ COMP, OCSP, UI, KRB5, -
+ CMS, PQUEUE, TS, JPAKE, SRP, STORE, CMAC
+$!
+$ EXHEADER_ := crypto.h, opensslv.h, ebcdic.h, symhacks.h, ossl_typ.h
+$ EXHEADER_'ARCHD' := opensslconf.h
+$ EXHEADER_OBJECTS := objects.h, obj_mac.h
$ EXHEADER_MD2 := md2.h
$ EXHEADER_MD4 := md4.h
$ EXHEADER_MD5 := md5.h
$ EXHEADER_HMAC := hmac.h
$ EXHEADER_RIPEMD := ripemd.h
$ EXHEADER_WHRLPOOL := whrlpool.h
-$ EXHEADER_DES := des.h,des_old.h
+$ EXHEADER_DES := des.h, des_old.h
+$ EXHEADER_AES := aes.h
$ EXHEADER_RC2 := rc2.h
$ EXHEADER_RC4 := rc4.h
$ EXHEADER_RC5 := rc5.h
$ EXHEADER_BF := blowfish.h
$ EXHEADER_CAST := cast.h
$ EXHEADER_CAMELLIA := camellia.h
+$ EXHEADER_SEED := seed.h
+$ EXHEADER_MODES := modes.h
$ EXHEADER_BN := bn.h
$ EXHEADER_EC := ec.h
$ EXHEADER_RSA := rsa.h
$ EXHEADER_ECDH := ecdh.h
$ EXHEADER_DSO := dso.h
$ EXHEADER_ENGINE := engine.h
-$ EXHEADER_AES := aes.h
$ EXHEADER_BUFFER := buffer.h
$ EXHEADER_BIO := bio.h
-$ EXHEADER_STACK := stack.h,safestack.h
+$ EXHEADER_STACK := stack.h, safestack.h
$ EXHEADER_LHASH := lhash.h
$ EXHEADER_RAND := rand.h
$ EXHEADER_ERR := err.h
$ EXHEADER_EVP := evp.h
-$ EXHEADER_ASN1 := asn1.h,asn1_mac.h,asn1t.h
-$ EXHEADER_PEM := pem.h,pem2.h
-$ EXHEADER_X509 := x509.h,x509_vfy.h
+$ EXHEADER_ASN1 := asn1.h, asn1_mac.h, asn1t.h
+$ EXHEADER_PEM := pem.h, pem2.h
+$ EXHEADER_X509 := x509.h, x509_vfy.h
$ EXHEADER_X509V3 := x509v3.h
-$ EXHEADER_CONF := conf.h,conf_api.h
+$ EXHEADER_CONF := conf.h, conf_api.h
$ EXHEADER_TXT_DB := txt_db.h
$ EXHEADER_PKCS7 := pkcs7.h
$ EXHEADER_PKCS12 := pkcs12.h
$ EXHEADER_COMP := comp.h
$ EXHEADER_OCSP := ocsp.h
-$ EXHEADER_UI := ui.h,ui_compat.h
+$ EXHEADER_UI := ui.h, ui_compat.h
$ EXHEADER_KRB5 := krb5_asn.h
-$!EXHEADER_STORE := store.h,str_compat.h
-$ EXHEADER_STORE := store.h
-$ EXHEADER_PQUEUE := pqueue.h,pq_compat.h
+$ EXHEADER_CMS := cms.h
+$ EXHEADER_PQUEUE := pqueue.h
$ EXHEADER_TS := ts.h
-$
-$ I = 0
-$ LOOP_SDIRS:
-$ D = F$EDIT(F$ELEMENT(I, ",", SDIRS),"TRIM")
-$ I = I + 1
-$ IF D .EQS. "," THEN GOTO LOOP_SDIRS_END
-$ tmp = EXHEADER_'D'
-$ IF D .EQS. ""
-$ THEN
-$ COPY [.CRYPTO]'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG
-$ ELSE
-$ COPY [.CRYPTO.'D']'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG
-$ ENDIF
-$ GOTO LOOP_SDIRS
-$ LOOP_SDIRS_END:
+$ EXHEADER_JPAKE := jpake.h
+$ EXHEADER_SRP := srp.h
+$!!! EXHEADER_STORE := store.h, str_compat.h
+$ EXHEADER_STORE := store.h
+$ EXHEADER_CMAC := cmac.h
+$!
+$ i = 0
+$ loop_sdirs:
+$ sdir = f$edit( f$element( i, ",", sdirs), "trim")
+$ i = i + 1
+$ if (sdir .eqs. ",") then goto loop_sdirs_end
+$ hdr_list = exheader_'sdir'
+$ if (sdir .nes. "") then sdir = "."+ sdir
+$ copy [.crypto'sdir']'hdr_list' sys$disk:[.include.openssl]
+$ goto loop_sdirs
+$ loop_sdirs_end:
$!
$! Copy All The ".H" Files From The [.SSL] Directory.
$!
-$ EXHEADER := ssl.h,ssl2.h,ssl3.h,ssl23.h,tls1.h,dtls1.h,kssl.h
-$ COPY SYS$DISK:[.SSL]'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
+$! (keep these in the same order as ssl/Makefile)
+$ EXHEADER := ssl.h, ssl2.h, ssl3.h, ssl23.h, tls1.h, dtls1.h, kssl.h
+$ copy sys$disk:[.ssl]'exheader' sys$disk:[.include.openssl]
$!
-$! Purge all doubles
+$! Purge the [.include.openssl] header files.
$!
-$ PURGE SYS$DISK:[.INCLUDE.OPENSSL]*.H
+$ purge sys$disk:[.include.openssl]*.h
$!
$! That's All, Time To RETURN.
$!
$ RETURN
$!
-$! Build The "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" Library.
+$! Build The "[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO''LIB32'.OLB" Library.
$!
$ CRYPTO:
$!
$! Tell The User What We Are Doing.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.CRYPTO]LIBCRYPTO.OLB Library."
+$ WRITE SYS$OUTPUT -
+ "Building The [.",ARCHD,".EXE.CRYPTO]SSL_LIBCRYPTO''LIB32'.OLB Library."
$!
$! Go To The [.CRYPTO] Directory.
$!
$!
$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
$!
-$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'"
+$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
+ "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
$!
$! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications.
$!
-$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN' "''BUILDPART'"
+$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
+ "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
$!
$! Go Back To The Main Directory.
$!
$!
$ RETURN
$!
-$! Build The "[.xxx.EXE.SSL]LIBSSL.OLB" Library.
+$! Build The "[.xxx.EXE.SSL]SSL_LIBSSL''LIB32'.OLB" Library.
$!
$ SSL:
$!
$! Tell The User What We Are Doing.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.SSL]LIBSSL.OLB Library."
+$ WRITE SYS$OUTPUT -
+ "Building The [.",ARCHD,".EXE.SSL]SSL_LIBSSL''LIB32'.OLB Library."
$!
$! Go To The [.SSL] Directory.
$!
$!
$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.
$!
-$ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
+ "''ISSEVEN'" "''POINTER_SIZE'" "''ZLIB'"
$!
$! Go Back To The Main Directory.
$!
$! Tell The User What We Are Doing.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building DECNet Based SSL Engine, [.",ARCH,".EXE.SSL]SSL_TASK.EXE"
+$ WRITE SYS$OUTPUT -
+ "Building DECNet Based SSL Engine, [.",ARCHD,".EXE.SSL]SSL_TASK.EXE"
$!
$! Go To The [.SSL] Directory.
$!
$!
$! Build The [.xxx.EXE.SSL]SSL_TASK.EXE
$!
-$ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
+ "''ISSEVEN'" "''POINTER_SIZE'" "''ZLIB'"
$!
$! Go Back To The Main Directory.
$!
$! Tell The User What We Are Doing.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building The OpenSSL [.",ARCH,".EXE.TEST] Test Utilities."
+$ WRITE SYS$OUTPUT "Building The OpenSSL [.",ARCHD,".EXE.TEST] Test Utilities."
$!
$! Go To The [.TEST] Directory.
$!
$!
$! Build The Test Programs.
$!
-$ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" -
+ "''POINTER_SIZE'" "''ZLIB'"
$!
$! Go Back To The Main Directory.
$!
$! Tell The User What We Are Doing.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.APPS] Applications."
+$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCHD,".EXE.APPS] Applications."
$!
$! Go To The [.APPS] Directory.
$!
$!
$! Build The Application Programs.
$!
-$ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" -
+ "" "''POINTER_SIZE'" "''ZLIB'"
$!
$! Go Back To The Main Directory.
$!
$! Tell The User What We Are Doing.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.ENGINES] Engines."
+$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCHD,".EXE.ENGINES] Engines."
$!
$! Go To The [.ENGINES] Directory.
$!
$!
$! Build The Application Programs.
$!
-$ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN' "''BUILDPART'"
+$ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
+ "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
$!
$! Go Back To The Main Directory.
$!
$!
$ ELSE
$!
-$! Else, Check To See If P1 Has A Valid Arguement.
+$! Else, Check To See If P1 Has A Valid Argument.
$!
$ IF (P1.EQS."CONFIG").OR.(P1.EQS."BUILDINF").OR.(P1.EQS."SOFTLINKS") -
.OR.(P1.EQS."BUILDALL") -
.OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL") -
- .OR.(P1.EQS."SSL_TASK").OR.(P1.EQS."TEST").OR.(P1.EQS."APPS")
+ .OR.(P1.EQS."SSL_TASK").OR.(P1.EQS."TEST").OR.(P1.EQS."APPS") -
+ .OR.(P1.EQS."ENGINES")
$ THEN
$!
-$! A Valid Arguement.
+$! A Valid Argument.
$!
$ BUILDCOMMAND = P1
$!
$! Tell The User We Don't Know What They Want.
$!
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P1," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT "USAGE: @MAKEVMS.COM [Target] [Pointer size] [Debug option] <Compiler>"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "Example: @MAKEVMS.COM ALL """" NODEBUG "
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Target ",P1," Is Invalid. The Valid Target Options Are:"
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " ALL : Just Build Everything."
-$ WRITE SYS$OUTPUT " CONFIG : Just build the [.CRYPTO]OPENSSLCONF.H file."
-$ WRITE SYS$OUTPUT " BUILDINF : Just build the [.CRYPTO]BUILDINF.H file."
+$ WRITE SYS$OUTPUT " CONFIG : Just build the [.CRYPTO._xxx]OPENSSLCONF.H file."
+$ WRITE SYS$OUTPUT " BUILDINF : Just build the [.CRYPTO._xxx]BUILDINF.H file."
$ WRITE SYS$OUTPUT " SOFTLINKS: Just Fix The Unix soft links."
$ WRITE SYS$OUTPUT " BUILDALL : Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done."
$ WRITE SYS$OUTPUT " CRYPTO : To Build Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
$ WRITE SYS$OUTPUT " SSL_TASK : To Build Just The [.xxx.EXE.SSL]SSL_TASK.EXE Program."
$ WRITE SYS$OUTPUT " TEST : To Build Just The OpenSSL Test Programs."
$ WRITE SYS$OUTPUT " APPS : To Build Just The OpenSSL Application Programs."
+$ WRITE SYS$OUTPUT " ENGINES : To Build Just The ENGINES"
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " Where 'xxx' Stands For:"
$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " AXP : Alpha Architecture."
-$ WRITE SYS$OUTPUT " VAX : VAX Architecture."
+$ WRITE SYS$OUTPUT " ALPHA[64]: Alpha Architecture."
+$ WRITE SYS$OUTPUT " IA64[64] : IA64 Architecture."
+$ WRITE SYS$OUTPUT " VAX : VAX Architecture."
$ WRITE SYS$OUTPUT ""
$!
$! Time To EXIT.
$!
-$ EXIT
+$ GOTO TIDY
$!
$! End The Valid Argument Check.
$!
$!
$ ENDIF
$!
+$! Check P2 (POINTER_SIZE).
+$!
+$ IF (P2 .NES. "") .AND. (ARCH .NES. "VAX")
+$ THEN
+$!
+$ IF (P2 .EQS. "32")
+$ THEN
+$ POINTER_SIZE = "32"
+$ ELSE
+$ POINTER_SIZE = F$EDIT( P2, "COLLAPSE, UPCASE")
+$ IF ((POINTER_SIZE .EQS. "64") .OR. -
+ (POINTER_SIZE .EQS. "64=") .OR. -
+ (POINTER_SIZE .EQS. "64=ARGV"))
+$ THEN
+$ ARCHD = ARCH+ "_64"
+$ LIB32 = ""
+$ ELSE
+$!
+$! Tell The User Entered An Invalid Option.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ", P2, -
+ " Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT -
+ " """" : Compile with default (short) pointers."
+$ WRITE SYS$OUTPUT -
+ " 32 : Compile with 32-bit (short) pointers."
+$ WRITE SYS$OUTPUT -
+ " 64 : Compile with 64-bit (long) pointers (auto ARGV)."
+$ WRITE SYS$OUTPUT -
+ " 64= : Compile with 64-bit (long) pointers (no ARGV)."
+$ WRITE SYS$OUTPUT -
+ " 64=ARGV : Compile with 64-bit (long) pointers (ARGV)."
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ GOTO TIDY
+$!
+$ ENDIF
+$!
+$ ENDIF
+$!
+$! End The P2 (POINTER_SIZE) Check.
+$!
+$ ENDIF
+$!
$! Check To See If P3 Is Blank.
$!
$ IF (P3.EQS."NODEBUG")
$!
$ ELSE
$!
-$! Tell The User Entered An Invalid Option..
+$! Tell The User Entered An Invalid Option.
$!
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:"
$!
$! Time To EXIT.
$!
-$ EXIT
+$ GOTO TIDY
$!
-$! End The Valid Arguement Check.
+$! End The Valid Argument Check.
$!
$ ENDIF
$!
$!
$ ELSE
$!
-$! Check To See If The User Entered A Valid Paramter.
+$! Check To See If The User Entered A Valid Parameter.
$!
$ IF (P4.EQS."VAXC").OR.(P4.EQS."DECC").OR.(P4.EQS."GNUC")!.OR.(P4.EQS."LINK")
$ THEN
$!
$ ENDIF
$!
-$! Else The User Entered An Invalid Arguement.
+$! Else The User Entered An Invalid Argument.
$!
$ ELSE
$!
$!
$! Time To EXIT.
$!
-$ EXIT
+$ GOTO TIDY
$!
-$! End The Valid Arguement Check.
+$! End The Valid Argument Check.
$!
$ ENDIF
$!
$!
$ ENDIF
$!
-$! Time to check the contents of P5, and to make sure we get the correct library.
+$! Time to check the contents of P5, and to make sure we get the correct
+$! library.
$!
$ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX" -
.OR. P5.EQS."TCPIP" .OR. P5.EQS."NONE"
$!
$! Set the library to use SOCKETSHR
$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS"
$!
$! Tell the user
$!
$!
$! Set the library to use UCX.
$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS"
$!
$! Tell the user
$!
$!
$! Set the library to use TCPIP (post UCX).
$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS"
$!
$! Tell the user
$!
$!
$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
$!
-$! Else The User Entered An Invalid Arguement.
+$! Else The User Entered An Invalid Argument.
$!
$ ELSE
$ IF P5 .NES. ""
$!
$! Time To EXIT.
$!
-$ EXIT
+$ GOTO TIDY
$ ELSE
$!
$! If TCPIP is not defined, then hardcode it to make
$! Get The Version Of VMS We Are Using.
$!
$ ISSEVEN :=
-$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION")))
+$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,VMS_VERSION))
$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))
$!
$! Check To See If The VMS Version Is v7.1 Or Later.
$!
$ ENDIF
$!
+$!
+$! Check To See If We Have A ZLIB Option.
+$!
+$ ZLIB = P7
+$ IF (ZLIB .NES. "")
+$ THEN
+$!
+$! Check for expected ZLIB files.
+$!
+$ err = 0
+$ file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY")
+$ if (f$search( file1) .eqs. "")
+$ then
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
+$ WRITE SYS$OUTPUT " Can't find header: ''file1'"
+$ err = 1
+$ endif
+$!
+$ file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY")
+$ if (f$search( file2) .eqs. "")
+$ then
+$ if (err .eq. 0)
+$ then
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
+$ endif
+$ WRITE SYS$OUTPUT " Can't find library: ''file2'"
+$ WRITE SYS$OUTPUT ""
+$ err = err+ 2
+$ endif
+$ if (err .eq. 1)
+$ then
+$ WRITE SYS$OUTPUT ""
+$ endif
+$!
+$ if (err .ne. 0)
+$ then
+$ GOTO TIDY
+$ endif
+$!
+$! Print info
+$!
+$ WRITE SYS$OUTPUT "ZLIB library spec: ", file2
+$!
+$! End The ZLIB Check.
+$!
+$ ENDIF
+$!
$! Time To RETURN...
$!
$ RETURN
+$!
+$ TIDY:
+$!
+$! Close any open files.
+$!
+$ if (f$trnlnm( "h_file", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
+ close h_file
+$!
+$! Restore the original default device:[directory].
+$!
+$ SET DEFAULT 'DEF_ORIG'
+$!
+$ EXIT
+$!
projects / openssl.git / blobdiff