$! Changes by Richard Levitte <richard@levitte.org>
$!
$! This procedure creates the SSL libraries of "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB"
-$! "[.xxx.EXE.SSL]LIBSSL.OLB" and if specified "[.xxx.EXE.RSAREF]LIBRSAGLUE.OLB".
+$! "[.xxx.EXE.SSL]LIBSSL.OLB"
$! The "xxx" denotes the machine architecture of AXP or VAX.
$!
$! This procedures accepts two command line options listed below.
$! BUILDINF Just build the "[.CRYPTO]BUILDINF.H" file.
$! SOFTLINKS Just fix the Unix soft links.
$! BUILDALL Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done.
-$! RSAREF Just build the "[.xxx.EXE.RSAREF]LIBRSAGLUE.OLB" library.
$! CRYPTO Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
$! CRYPTO/x Just build the x part of the
$! "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
$! SSL_TASK Just build the "[.xxx.EXE.SSL]SSL_TASK.EXE" program.
$! TEST Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL.
$! APPS Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
+$! ENGINES Just build the "[.xxx.EXE.ENGINES]" application programs for OpenSSL.
$!
$!
-$! Specify RSAREF as P2 to compile using the RSAREF Library.
-$! If you specify NORSAREF, it will compile without using RSAREF.
-$! (If in the United States, You Must Compile Using RSAREF).
-$!
-$! Note: The RSAREF libraries are NOT INCLUDED and you have to
-$! download it from "ftp://ftp.rsa.com/rsaref". You have to
-$! get the ".tar-Z" file as the ".zip" file dosen't have the
-$! directory structure stored. You have to extract the file
-$! into the [.RSAREF] directory as that is where the scripts
-$! will look for the files.
+$! P2 is ignored (it was used to denote if RSAref should be used or not,
+$! and is simply kept so surrounding scripts don't get confused)
$!
$! Speficy DEBUG or NODEBUG as P3 to compile with or without debugging
$! information.
$! If you don't speficy a compiler, it will try to determine which
$! "C" compiler to use.
$!
-$! P5, if defined, sets a TCP/IP library to use, through one of the following
-$! keywords:
+$! P5, if defined, sets a TCP/IP library to use, through one of the following
+$! keywords:
$!
$! UCX for UCX or UCX emulation
+$! TCPIP for TCP/IP Services or TCP/IP Services emulation
+$! (this is prefered over UCX)
$! SOCKETSHR for SOCKETSHR+NETLIB
+$! NONE to avoid specifying which TCP/IP implementation to
+$! use at build time (this works with DEC C). This is
+$! the default.
$!
$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
$!
$ IF (BUILDCOMMAND.EQS."ALL".OR.BUILDCOMMAND.EQS."BUILDALL")
$ THEN
$!
-$! Check To See If We Are Going To Be Building The
-$! [.xxx.EXE.RSAREF]LIBRSAGLUE.OLB Library.
-$!
-$ IF (RSAREF.EQS."RSAREF")
-$ THEN
-$!
-$! Build The [.xxx.EXE.RSAREF]LIBRSAGLUE.OLB Library.
-$!
-$ GOSUB RSAREF
-$!
-$! End The RSAREF Check.
-$!
-$ ENDIF
-$!
$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
$!
$ GOSUB CRYPTO
$!
$ GOSUB APPS
$!
+$! Build The [.xxx.EXE.ENGINES] OpenSSL Shareable Engines.
+$!
+$ GOSUB ENGINES
+$!
$! Else...
$!
$ ELSE
$ ENDIF
$ GOTO CONFIG_LOG_LOOP
$ CONFIG_LOG_LOOP_END:
+$ WRITE H_FILE "#ifndef OPENSSL_NO_STATIC_ENGINE"
+$ WRITE H_FILE "# define OPENSSL_NO_STATIC_ENGINE"
+$ WRITE H_FILE "#endif"
$ WRITE H_FILE "#ifndef OPENSSL_THREADS"
$ WRITE H_FILE "# define OPENSSL_THREADS"
$ WRITE H_FILE "#endif"
$!
$ SOFTLINKS:
$!
-$! Tell The User We Are Partly Rebuilding The [.TEST] Directory.
+$! Tell The User We Are Partly Rebuilding The [.APPS] Directory.
$!
-$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD5.C' And '[.APPS]RMD160.C' Files."
+$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C', '[.APPS]MD5.C' And '[.APPS]RMD160.C' Files."
$!
$ DELETE SYS$DISK:[.APPS]MD4.C;*,MD5.C;*,RMD160.C;*
$!
$! Copy all the *TEST.C files from [.CRYPTO...] into [.TEST]
$!
$ COPY SYS$DISK:[.CRYPTO.*]%*TEST.C SYS$DISK:[.TEST]
+$ COPY SYS$DISK:[.CRYPTO.SHA]SHA%%%T.C SYS$DISK:[.TEST]
$ COPY SYS$DISK:[.CRYPTO.EVP]EVPTESTS.TXT SYS$DISK:[.TEST]
$!
$! Copy all the *TEST.C files from [.SSL...] into [.TEST]
$!
$! Copy All The ".H" Files From The [.CRYPTO] Directory Tree.
$!
-$ SDIRS := ,MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,-
+$ SDIRS := ,-
+ OBJECTS,-
+ MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,-
DES,RC2,RC4,RC5,IDEA,BF,CAST,-
- BN,EC,RSA,DSA,DH,DSO,ENGINE,AES,-
- BUFFER,BIO,STACK,LHASH,RAND,ERR,OBJECTS,-
- EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5
+ BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,AES,-
+ BUFFER,BIO,STACK,LHASH,RAND,ERR,-
+ EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,-
+ STORE
$ EXHEADER_ := crypto.h,tmdiff.h,opensslv.h,opensslconf.h,ebcdic.h,symhacks.h,-
ossl_typ.h
+$ EXHEADER_OBJECTS := objects.h,obj_mac.h
$ EXHEADER_MD2 := md2.h
$ EXHEADER_MD4 := md4.h
$ EXHEADER_MD5 := md5.h
$ EXHEADER_EC := ec.h
$ EXHEADER_RSA := rsa.h
$ EXHEADER_DSA := dsa.h
+$ EXHEADER_ECDSA := ecdsa.h
$ EXHEADER_DH := dh.h
+$ EXHEADER_ECDH := ecdh.h
$ EXHEADER_DSO := dso.h
$ EXHEADER_ENGINE := engine.h
$ EXHEADER_AES := aes.h
$ EXHEADER_LHASH := lhash.h
$ EXHEADER_RAND := rand.h
$ EXHEADER_ERR := err.h
-$ EXHEADER_OBJECTS := objects.h,obj_mac.h
$ EXHEADER_EVP := evp.h
$ EXHEADER_ASN1 := asn1.h,asn1_mac.h,asn1t.h
$ EXHEADER_PEM := pem.h,pem2.h
$ EXHEADER_OCSP := ocsp.h
$ EXHEADER_UI := ui.h,ui_compat.h
$ EXHEADER_KRB5 := krb5_asn.h
+$!EXHEADER_STORE := store.h,str_compat.h
+$ EXHEADER_STORE := store.h
$
$ I = 0
$ LOOP_SDIRS:
$ GOTO LOOP_SDIRS
$ LOOP_SDIRS_END:
$!
-$! Copy All The ".H" Files From The [.RSAREF] Directory.
-$!
-$! EXHEADER := rsaref.h
-$! COPY SYS$DISK:[.RSAREF]'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
-$!
$! Copy All The ".H" Files From The [.SSL] Directory.
$!
$ EXHEADER := ssl.h,ssl2.h,ssl3.h,ssl23.h,tls1.h,kssl.h
$!
$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
$!
-$ @CRYPTO-LIB LIBRARY 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'"
+$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'"
$!
$! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications.
$!
-$ @CRYPTO-LIB APPS 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN' "''BUILDPART'"
$!
$! Go Back To The Main Directory.
$!
$!
$ RETURN
$!
-$! Build The [.xxx.EXE.RSAREF]LIBRSAGLUE Library.
-$!
-$ RSAREF:
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "RSAref glue library not built, since it's no longer needed"
-$ RETURN
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.RSAREF]LIBRSAGLUE.OLB Library."
-$!
-$! Go To The [.RSAREF] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.RSAREF]
-$!
-$! Build The [.xxx.EXE.RSAREF]LIBRSAGLUE.OLB Library.
-$!
-$ @RSAREF-LIB LIBRARY 'DEBUGGER' "''COMPILER'" 'ISSEVEN'
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! Time To Return.
-$!
-$ RETURN
-$!
$! Build The "[.xxx.EXE.SSL]LIBSSL.OLB" Library.
$!
$ SSL:
$!
$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.
$!
-$ @SSL-LIB LIBRARY 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
$!
$! Go Back To The Main Directory.
$!
$!
$! Build The [.xxx.EXE.SSL]SSL_TASK.EXE
$!
-$ @SSL-LIB SSL_TASK 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
$!
$! Go Back To The Main Directory.
$!
$!
$! Build The Test Programs.
$!
-$ @MAKETESTS 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
$!
$! Go Back To The Main Directory.
$!
$!
$! Build The Application Programs.
$!
-$ @MAKEAPPS 'RSAREF' 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
+$!
+$! Go Back To The Main Directory.
+$!
+$ SET DEFAULT [-]
+$!
+$! That's All, Time To RETURN.
+$!
+$ RETURN
+$!
+$! Build The OpenSSL Application Programs.
+$!
+$ ENGINES:
+$!
+$! Tell The User What We Are Doing.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.ENGINES] Engines."
+$!
+$! Go To The [.ENGINES] Directory.
+$!
+$ SET DEFAULT SYS$DISK:[.ENGINES]
+$!
+$! Build The Application Programs.
+$!
+$ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN' "''BUILDPART'"
$!
$! Go Back To The Main Directory.
$!
$!
$ IF (P1.EQS."CONFIG").OR.(P1.EQS."BUILDINF").OR.(P1.EQS."SOFTLINKS") -
.OR.(P1.EQS."BUILDALL") -
- .OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL").OR.(P1.EQS."RSAREF") -
+ .OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL") -
.OR.(P1.EQS."SSL_TASK").OR.(P1.EQS."TEST").OR.(P1.EQS."APPS")
$ THEN
$!
$!
$ ENDIF
$!
-$! Check To See If P2 Is Blank.
-$!
-$ P2 = "NORSAREF"
-$ IF (P2.EQS."NORSAREF")
-$ THEN
-$!
-$! P2 Is NORSAREF, So Compile Without RSAREF.
-$!
-$ RSAREF = "NORSAREF"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Check To See If We Are To Compile Using The RSAREF Library.
-$!
-$ IF (P2.EQS."RSAREF")
-$ THEN
-$!
-$! Compile With RSAREF Library.
-$!
-$ RSAREF = "RSAREF"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Tell The User Entered An Invalid Option..
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " RSAREF : To Compile With The RSAREF Library."
-$ WRITE SYS$OUTPUT " NORSAREF : To Compile With The Regular RSA Library."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! End The Valid Arguemnt Check.
-$!
-$ ENDIF
-$!
-$! End The P2 Check.
-$!
-$ ENDIF
-$!
$! Check To See If P3 Is Blank.
$!
$ IF (P3.EQS."NODEBUG")
$!
$! Time to check the contents of P5, and to make sure we get the correct library.
$!
-$ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX"
+$ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX" -
+ .OR. P5.EQS."TCPIP" .OR. P5.EQS."NONE"
$ THEN
$!
$! Check to see if SOCKETSHR was chosen
$!
$! Set the library to use SOCKETSHR
$!
-$ TCPIP_LIB = "[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
$!
$! Tell the user
$!
$!
$! Set the library to use UCX.
$!
-$ TCPIP_LIB = "[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
$!
$! Tell the user
$!
$!
$ ENDIF
$!
+$! Check to see if TCPIP was chosen
+$!
+$ IF P5.EQS."TCPIP"
+$ THEN
+$!
+$! Set the library to use TCPIP (post UCX).
+$!
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
+$!
+$! Tell the user
+$!
+$ WRITE SYS$OUTPUT "Using TCPIP (post UCX) for TCP/IP"
+$!
+$! Done with TCPIP
+$!
+$ ENDIF
+$!
+$! Check to see if NONE was chosen
+$!
+$ IF P5.EQS."NONE"
+$ THEN
+$!
+$! Do not use a TCPIP library.
+$!
+$ TCPIP_LIB = ""
+$!
+$! Tell the user
+$!
+$ WRITE SYS$OUTPUT "A specific TCPIP library will not be used."
+$!
+$! Done with NONE.
+$!
+$ ENDIF
+$!
$! Set the TCPIP_TYPE symbol
$!
$ TCPIP_TYPE = P5
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library."
$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library."
+$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP TCP/IP (post UCX) library."
+$ WRITE SYS$OUTPUT " NONE : To not link with a specific TCP/IP library."
$ WRITE SYS$OUTPUT ""
$!
$! Time To EXIT.
$ EXIT
$ ELSE
$!
+$! If TCPIP is not defined, then hardcode it to make
+$! it clear that no TCPIP is desired.
+$!
+$ IF P5 .EQS. ""
+$ THEN
+$ TCPIP_LIB = ""
+$ TCPIP_TYPE = "NONE"
+$ ELSE
+$!
$! Set the TCPIP_TYPE symbol
$!
-$ TCPIP_TYPE = P5
+$ TCPIP_TYPE = P5
+$ ENDIF
$ ENDIF
$!
$! Done with TCP/IP libraries
projects / openssl.git / blobdiff