$! If you don't speficy a compiler, it will try to determine which
$! "C" compiler to use.
$!
-$! P5, if defined, sets a TCP/IP library to use, through one of the following
-$! keywords:
+$! P5, if defined, sets a TCP/IP library to use, through one of the following
+$! keywords:
$!
$! UCX for UCX or UCX emulation
+$! TCPIP for TCP/IP Services or TCP/IP Services emulation
+$! (this is prefered over UCX)
$! SOCKETSHR for SOCKETSHR+NETLIB
+$! NONE to avoid specifying which TCP/IP implementation to
+$! use at build time (this works with DEC C). This is
+$! the default.
$!
$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
$!
$ WRITE H_FILE "/* This file was automatically built using makevms.com */"
$ WRITE H_FILE "/* and [.CRYPTO]OPENSSLCONF.H_IN */"
$
+$!
+$! Write a few macros that indicate how this system was built.
+$!
+$ WRITE H_FILE ""
+$ WRITE H_FILE "#ifndef OPENSSL_SYS_VMS"
+$ WRITE H_FILE "# define OPENSSL_SYS_VMS"
+$ WRITE H_FILE "#endif"
+$ CONFIG_LOGICALS := NO_ASM,NO_RSA,NO_DSA,NO_DH,NO_MD2,NO_MD5,NO_RIPEMD,-
+ NO_SHA,NO_SHA0,NO_SHA1,NO_DES/NO_MDC2;NO_MDC2,NO_RC2,NO_RC4,NO_RC5,-
+ NO_IDEA,NO_BF,NO_CAST,NO_HMAC,NO_SSL2
+$ CONFIG_LOG_I = 0
+$ CONFIG_LOG_LOOP:
+$ CONFIG_LOG_E1 = F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS)
+$ CONFIG_LOG_I = CONFIG_LOG_I + 1
+$ IF CONFIG_LOG_E1 .EQS. "" THEN GOTO CONFIG_LOG_LOOP
+$ IF CONFIG_LOG_E1 .EQS. "," THEN GOTO CONFIG_LOG_LOOP_END
+$ CONFIG_LOG_E2 = F$EDIT(CONFIG_LOG_E1,"TRIM")
+$ CONFIG_LOG_E1 = F$ELEMENT(0,";",CONFIG_LOG_E2)
+$ CONFIG_LOG_E2 = F$ELEMENT(1,";",CONFIG_LOG_E2)
+$ CONFIG_LOG_E0 = F$ELEMENT(0,"/",CONFIG_LOG_E1)
+$ CONFIG_LOG_E1 = F$ELEMENT(1,"/",CONFIG_LOG_E1)
+$ IF F$TRNLNM("OPENSSL_"+CONFIG_LOG_E0)
+$ THEN
+$ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E0
+$ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E0
+$ WRITE H_FILE "#endif"
+$ IF CONFIG_LOG_E1 .NES. "/"
+$ THEN
+$ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E1
+$ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E1
+$ WRITE H_FILE "#endif"
+$ ENDIF
+$ ELSE
+$ IF CONFIG_LOG_E2 .NES. ";"
+$ THEN
+$ IF F$TRNLNM("OPENSSL_"+CONFIG_LOG_E2)
+$ THEN
+$ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E2
+$ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E2
+$ WRITE H_FILE "#endif"
+$ ENDIF
+$ ENDIF
+$ ENDIF
+$ GOTO CONFIG_LOG_LOOP
+$ CONFIG_LOG_LOOP_END:
+$ WRITE H_FILE "#ifndef OPENSSL_THREADS"
+$ WRITE H_FILE "# define OPENSSL_THREADS"
+$ WRITE H_FILE "#endif"
+$ WRITE H_FILE "#ifndef OPENSSL_NO_KRB5"
+$ WRITE H_FILE "# define OPENSSL_NO_KRB5"
+$ WRITE H_FILE "#endif"
+$ WRITE H_FILE ""
+$!
$! Different tar version may have named the file differently
$ IF F$SEARCH("[.CRYPTO]OPENSSLCONF.H_IN") .NES. ""
$ THEN
$ THEN
$ TYPE [.CRYPTO]OPENSSLCONF_H.IN /OUTPUT=H_FILE:
$ ELSE
-$ WRITE SYS$ERROR "Couldn't find a [.CRYPTO]OPENSSLCONF.H_IN. Exiting!"
-$ EXIT 0
+$ ! For ODS-5
+$ IF F$SEARCH("[.CRYPTO]OPENSSLCONF.H.IN") .NES. ""
+$ THEN
+$ TYPE [.CRYPTO]OPENSSLCONF.H.IN /OUTPUT=H_FILE:
+$ ELSE
+$ WRITE SYS$ERROR "Couldn't find a [.CRYPTO]OPENSSLCONF.H_IN. Exiting!"
+$ EXIT 0
+$ ENDIF
$ ENDIF
$ ENDIF
-$!
$ IF ARCH .EQS. "AXP"
$ THEN
$!
$ WRITE H_FILE "#undef SIXTEEN_BIT"
$ WRITE H_FILE "#undef EIGHT_BIT"
$ WRITE H_FILE "#endif"
+$
+$ WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"
$!
$! Else...
$!
$ WRITE H_FILE "#undef SIXTEEN_BIT"
$ WRITE H_FILE "#undef EIGHT_BIT"
$ WRITE H_FILE "#endif"
+$
+$ WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"
+$ WRITE H_FILE "#define OPENSSL_EXPORT_VAR_AS_FUNCTION"
$!
$! End
$!
$!
$! Tell The User We Are Partly Rebuilding The [.TEST] Directory.
$!
-$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD5.C' And '[.APPS]RMD160.C' Files."
+$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C', '[.APPS]MD5.C' And '[.APPS]RMD160.C' Files."
$!
$ DELETE SYS$DISK:[.APPS]MD4.C;*,MD5.C;*,RMD160.C;*
$!
$! All The "C" Files That Are Currently There Now.
$!
$ DELETE SYS$DISK:[.TEST]*.C;*
+$ DELETE SYS$DISK:[.TEST]EVPTESTS.TXT;*
$!
$! Copy all the *TEST.C files from [.CRYPTO...] into [.TEST]
$!
$ COPY SYS$DISK:[.CRYPTO.*]%*TEST.C SYS$DISK:[.TEST]
+$ COPY SYS$DISK:[.CRYPTO.EVP]EVPTESTS.TXT SYS$DISK:[.TEST]
$!
$! Copy all the *TEST.C files from [.SSL...] into [.TEST]
$!
$!
$! Copy All The ".H" Files From The Main Directory.
$!
-$ EXHEADER := e_os.h,e_os2.h
+$ EXHEADER := e_os2.h
$ COPY 'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
$!
$! Copy All The ".H" Files From The [.CRYPTO] Directory Tree.
$!
$ SDIRS := ,MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,-
DES,RC2,RC4,RC5,IDEA,BF,CAST,-
- BN,RSA,DSA,DH,DSO,-
+ BN,EC,RSA,DSA,ECDSA,DH,DSO,ENGINE,AES,-
BUFFER,BIO,STACK,LHASH,RAND,ERR,OBJECTS,-
- EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP
-$ EXHEADER_ := crypto.h,tmdiff.h,opensslv.h,opensslconf.h,ebcdic.h,symhacks.h
+ EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5
+$ EXHEADER_ := crypto.h,tmdiff.h,opensslv.h,opensslconf.h,ebcdic.h,symhacks.h,-
+ ossl_typ.h
$ EXHEADER_MD2 := md2.h
$ EXHEADER_MD4 := md4.h
$ EXHEADER_MD5 := md5.h
$ EXHEADER_MDC2 := mdc2.h
$ EXHEADER_HMAC := hmac.h
$ EXHEADER_RIPEMD := ripemd.h
-$ EXHEADER_DES := des.h
+$ EXHEADER_DES := des.h,des_old.h
$ EXHEADER_RC2 := rc2.h
$ EXHEADER_RC4 := rc4.h
$ EXHEADER_RC5 := rc5.h
$ EXHEADER_BF := blowfish.h
$ EXHEADER_CAST := cast.h
$ EXHEADER_BN := bn.h
+$ EXHEADER_EC := ec.h
$ EXHEADER_RSA := rsa.h
$ EXHEADER_DSA := dsa.h
+$ EXHEADER_ECDSA := ecdsa.h
$ EXHEADER_DH := dh.h
$ EXHEADER_DSO := dso.h
+$ EXHEADER_ENGINE := engine.h
+$ EXHEADER_AES := aes.h
$ EXHEADER_BUFFER := buffer.h
$ EXHEADER_BIO := bio.h
$ EXHEADER_STACK := stack.h,safestack.h
$ EXHEADER_ERR := err.h
$ EXHEADER_OBJECTS := objects.h,obj_mac.h
$ EXHEADER_EVP := evp.h
-$ EXHEADER_ASN1 := asn1.h,asn1_mac.h
+$ EXHEADER_ASN1 := asn1.h,asn1_mac.h,asn1t.h
$ EXHEADER_PEM := pem.h,pem2.h
$ EXHEADER_X509 := x509.h,x509_vfy.h
$ EXHEADER_X509V3 := x509v3.h
$ EXHEADER_PKCS7 := pkcs7.h
$ EXHEADER_PKCS12 := pkcs12.h
$ EXHEADER_COMP := comp.h
+$ EXHEADER_OCSP := ocsp.h
+$ EXHEADER_UI := ui.h,ui_compat.h
+$ EXHEADER_KRB5 := krb5_asn.h
$
$ I = 0
$ LOOP_SDIRS:
$!
$! Copy All The ".H" Files From The [.RSAREF] Directory.
$!
-$ EXHEADER := rsaref.h
-$ COPY SYS$DISK:[.RSAREF]'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
+$! EXHEADER := rsaref.h
+$! COPY SYS$DISK:[.RSAREF]'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
$!
$! Copy All The ".H" Files From The [.SSL] Directory.
$!
-$ EXHEADER := ssl.h,ssl2.h,ssl3.h,ssl23.h,tls1.h
+$ EXHEADER := ssl.h,ssl2.h,ssl3.h,ssl23.h,tls1.h,kssl.h
$ COPY SYS$DISK:[.SSL]'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
$!
$! Purge all doubles
$! Build The [.xxx.EXE.RSAREF]LIBRSAGLUE Library.
$!
$ RSAREF:
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "RSAref glue library not built, since it's no longer needed"
+$ RETURN
$!
$! Tell The User What We Are Doing.
$!
$ WRITE SYS$OUTPUT " BUILDINF : Just build the [.CRYPTO]BUILDINF.H file."
$ WRITE SYS$OUTPUT " SOFTLINKS: Just Fix The Unix soft links."
$ WRITE SYS$OUTPUT " BUILDALL : Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done."
-$ WRITE SYS$OUTPUT " RSAREF : To Build Just The [.xxx.EXE.RSAREF]LIBRSAGLUE.OLB Library."
$ WRITE SYS$OUTPUT " CRYPTO : To Build Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
$ WRITE SYS$OUTPUT " CRYPTO/x : To Build Just The x Part Of The"
$ WRITE SYS$OUTPUT " [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
$!
$! Check To See If P2 Is Blank.
$!
+$ P2 = "NORSAREF"
$ IF (P2.EQS."NORSAREF")
$ THEN
$!
$!
$! Time to check the contents of P5, and to make sure we get the correct library.
$!
-$ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX"
+$ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX" -
+ .OR. P5.EQS."TCPIP" .OR. P5.EQS."NONE"
$ THEN
$!
$! Check to see if SOCKETSHR was chosen
$!
$! Set the library to use SOCKETSHR
$!
-$ TCPIP_LIB = "[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
$!
$! Tell the user
$!
$!
$! Set the library to use UCX.
$!
-$ TCPIP_LIB = "[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
$!
$! Tell the user
$!
$!
$ ENDIF
$!
+$! Check to see if TCPIP was chosen
+$!
+$ IF P5.EQS."TCPIP"
+$ THEN
+$!
+$! Set the library to use TCPIP (post UCX).
+$!
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
+$!
+$! Tell the user
+$!
+$ WRITE SYS$OUTPUT "Using TCPIP (post UCX) for TCP/IP"
+$!
+$! Done with TCPIP
+$!
+$ ENDIF
+$!
+$! Check to see if NONE was chosen
+$!
+$ IF P5.EQS."NONE"
+$ THEN
+$!
+$! Do not use a TCPIP library.
+$!
+$ TCPIP_LIB = ""
+$!
+$! Tell the user
+$!
+$ WRITE SYS$OUTPUT "A specific TCPIP library will not be used."
+$!
+$! Done with NONE.
+$!
+$ ENDIF
+$!
$! Set the TCPIP_TYPE symbol
$!
$ TCPIP_TYPE = P5
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library."
$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library."
+$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP TCP/IP (post UCX) library."
+$ WRITE SYS$OUTPUT " NONE : To not link with a specific TCP/IP library."
$ WRITE SYS$OUTPUT ""
$!
$! Time To EXIT.
$ EXIT
$ ELSE
$!
+$! If TCPIP is not defined, then hardcode it to make
+$! it clear that no TCPIP is desired.
+$!
+$ IF P5 .EQS. ""
+$ THEN
+$ TCPIP_LIB = ""
+$ TCPIP_TYPE = "NONE"
+$ ELSE
+$!
$! Set the TCPIP_TYPE symbol
$!
-$ TCPIP_TYPE = P5
+$ TCPIP_TYPE = P5
+$ ENDIF
$ ENDIF
$!
$! Done with TCP/IP libraries
projects / openssl.git / blobdiff