+++ /dev/null
-$!
-$! MAKEVMS.COM
-$! Original Author: UNKNOWN
-$! Rewritten By: Robert Byer
-$! Vice-President
-$! A-Com Computing, Inc.
-$! byer@mail.all-net.net
-$!
-$! Changes by Richard Levitte <richard@levitte.org>
-$! Zoltan Arpadffy <zoli@polarhome.com>
-$!
-$! This procedure creates the SSL libraries of "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB"
-$! "[.xxx.EXE.SSL]LIBSSL.OLB"
-$! The "xxx" denotes the machine architecture of ALPHA, IA64 or VAX.
-$!
-$! This procedures accepts two command line options listed below.
-$!
-$! P1 specifies one of the following build options:
-$!
-$! ALL Just build "everything".
-$! CONFIG Just build the "[.CRYPTO._xxx]OPENSSLCONF.H" file.
-$! BUILDINF Just build the "[.CRYPTO._xxx]BUILDINF.H" file.
-$! SOFTLINKS Just fix the Unix soft links.
-$! BUILDALL Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done.
-$! CRYPTO Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
-$! CRYPTO/x Just build the x part of the
-$! "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
-$! SSL Just build the "[.xxx.EXE.SSL]LIBSSL.OLB" library.
-$! TEST Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL.
-$! APPS Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
-$! ENGINES Just build the "[.xxx.EXE.ENGINES]" application programs for OpenSSL.
-$!
-$! P2, if defined, specifies the C pointer size. Ignored on VAX.
-$! ("64=ARGV" gives more efficient code with HP C V7.3 or newer.)
-$! Supported values are:
-$!
-$! "" Compile with default (/NOPOINTER_SIZE).
-$! 32 Compile with /POINTER_SIZE=32 (SHORT).
-$! 64 Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV]).
-$! (Automatically select ARGV if compiler supports it.)
-$! 64= Compile with /POINTER_SIZE=64 (LONG).
-$! 64=ARGV Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV).
-$!
-$! P3 specifies DEBUG or NODEBUG, to compile with or without debugging
-$! information.
-$!
-$! P4 specifies which compiler to try to compile under.
-$!
-$! VAXC For VAX C.
-$! DECC For DEC C.
-$! GNUC For GNU C.
-$! LINK To only link the programs from existing object files.
-$! (not yet implemented)
-$!
-$! If you don't specify a compiler, it will try to determine which
-$! "C" compiler to use.
-$!
-$! P5, if defined, sets a TCP/IP library to use, through one of the following
-$! keywords:
-$!
-$! UCX for UCX or UCX emulation
-$! TCPIP for TCP/IP Services or TCP/IP Services emulation
-$! (this is prefered over UCX)
-$! SOCKETSHR for SOCKETSHR+NETLIB
-$! NONE to avoid specifying which TCP/IP implementation to
-$! use at build time (this works with DEC C). This is
-$! the default.
-$!
-$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up).
-$!
-$! P7, if defined, specifies a directory where ZLIB files (zlib.h,
-$! libz.olb) may be found. Optionally, a non-default object library
-$! name may be included ("dev:[dir]libz_64.olb", for example).
-$!
-$!
-$! Announce/identify.
-$!
-$ proc = f$environment( "procedure")
-$ write sys$output "@@@ "+ -
- f$parse( proc, , , "name")+ f$parse( proc, , , "type")
-$!
-$ DEF_ORIG = F$ENVIRONMENT( "DEFAULT")
-$ ON ERROR THEN GOTO TIDY
-$ ON CONTROL_C THEN GOTO TIDY
-$!
-$! Check if we're in a batch job, and make sure we get to
-$! the directory this script is in
-$!
-$ IF F$MODE() .EQS. "BATCH"
-$ THEN
-$ COMNAME=F$ENVIRONMENT("PROCEDURE")
-$ COMPATH=F$PARSE("A.;",COMNAME) - "A.;"
-$ SET DEF 'COMPATH'
-$ ENDIF
-$!
-$! Check What Architecture We Are Using.
-$!
-$ IF (F$GETSYI("CPU").LT.128)
-$ THEN
-$!
-$! The Architecture Is VAX.
-$!
-$ ARCH = "VAX"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! The Architecture Is Alpha, IA64 or whatever comes in the future.
-$!
-$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$ IF (ARCH .EQS. "") THEN ARCH = "UNK"
-$!
-$! End The Architecture Check.
-$!
-$ ENDIF
-$!
-$ ARCHD = ARCH
-$ LIB32 = "32"
-$ POINTER_SIZE = ""
-$!
-$! Get VMS version.
-$!
-$ VMS_VERSION = f$edit( f$getsyi( "VERSION"), "TRIM")
-$!
-$! Check To Make Sure We Have Valid Command Line Parameters.
-$!
-$ GOSUB CHECK_OPTIONS
-$!
-$! Check To See What We Are To Do.
-$!
-$ IF (BUILDCOMMAND.EQS."ALL")
-$ THEN
-$!
-$! Start with building the OpenSSL configuration file.
-$!
-$ GOSUB CONFIG
-$!
-$! Create The "BUILDINF.H" Include File.
-$!
-$ GOSUB BUILDINF
-$!
-$! Fix The Unix Softlinks.
-$!
-$ GOSUB SOFTLINKS
-$!
-$ ENDIF
-$!
-$ IF (BUILDCOMMAND.EQS."ALL".OR.BUILDCOMMAND.EQS."BUILDALL")
-$ THEN
-$!
-$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
-$!
-$ GOSUB CRYPTO
-$!
-$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.
-$!
-$ GOSUB SSL
-$!
-$! Build The [.xxx.EXE.TEST] OpenSSL Test Utilities.
-$!
-$ GOSUB TEST
-$!
-$! Build The [.xxx.EXE.APPS] OpenSSL Application Utilities.
-$!
-$ GOSUB APPS
-$!
-$! Build The [.xxx.EXE.ENGINES] OpenSSL Shareable Engines.
-$!
-$ GOSUB ENGINES
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Build Just What The User Wants Us To Build.
-$!
-$ GOSUB 'BUILDCOMMAND'
-$!
-$ ENDIF
-$!
-$! Time To EXIT.
-$!
-$ GOTO TIDY
-$!
-$! Rebuild The [.CRYPTO._xxx]OPENSSLCONF.H" file.
-$!
-$ CONFIG:
-$!
-$! Tell The User We Are Creating The [.CRYPTO._xxx]OPENSSLCONF.H File.
-$!
-$ WRITE SYS$OUTPUT "Creating [.CRYPTO.''ARCHD']OPENSSLCONF.H Include File."
-$!
-$! First, make sure the directory exists.
-$!
-$ IF F$PARSE("SYS$DISK:[.CRYPTO.''ARCHD']") .EQS. "" THEN -
- CREATE/DIRECTORY SYS$DISK:[.CRYPTO.'ARCHD']
-$!
-$! Different tar/UnZip versions/option may have named the file differently
-$ IF F$SEARCH("[.crypto]opensslconf.h_in") .NES. ""
-$ THEN
-$ OPENSSLCONF_H_IN = "[.crypto]opensslconf.h_in"
-$ ELSE
-$ IF F$SEARCH( "[.crypto]opensslconf_h.in") .NES. ""
-$ THEN
-$ OPENSSLCONF_H_IN = "[.crypto]opensslconf_h.in"
-$ ELSE
-$ ! For ODS-5
-$ IF F$SEARCH( "[.crypto]opensslconf.h.in") .NES. ""
-$ THEN
-$ OPENSSLCONF_H_IN = "[.crypto]opensslconf.h.in"
-$ ELSE
-$ WRITE SYS$ERROR "Couldn't find a [.crypto]opensslconf.h.in. Exiting!"
-$ $STATUS = %X00018294 ! "%RMS-F-FNF, file not found".
-$ GOTO TIDY
-$ ENDIF
-$ ENDIF
-$ ENDIF
-$!
-$! Create The [.CRYPTO._xxx]OPENSSLCONF.H File.
-$! Make sure it has the right format.
-$!
-$ OSCH_NAME = "SYS$DISK:[.CRYPTO.''ARCHD']OPENSSLCONF.H"
-$ CREATE /FDL=SYS$INPUT: 'OSCH_NAME'
-RECORD
- FORMAT stream_lf
-$ OPEN /APPEND H_FILE 'OSCH_NAME'
-$!
-$! Write The [.CRYPTO._xxx]OPENSSLCONF.H File.
-$!
-$ WRITE H_FILE "/* This file was automatically built using makevms.com */"
-$ WRITE H_FILE "/* and ''OPENSSLCONF_H_IN' */"
-$!
-$! Write a few macros that indicate how this system was built.
-$!
-$ WRITE H_FILE ""
-$ WRITE H_FILE "#ifndef OPENSSL_SYS_VMS"
-$ WRITE H_FILE "# define OPENSSL_SYS_VMS"
-$ WRITE H_FILE "#endif"
-$
-$!
-$! Defined the full SDIRS here. It will be pruned depending on configuration.
-$! This is an exact copy of what's found in Makefile.in, with spaces replaced
-$! with commas.
-$!
-$ SDIRS := -
- objects,-
- md2,md4,md5,sha,mdc2,hmac,ripemd,whrlpool,-
- des,aes,rc2,rc4,rc5,idea,bf,cast,camellia,seed,modes,-
- bn,ec,rsa,dsa,ecdsa,dh,ecdh,dso,engine,-
- buffer,bio,stack,lhash,rand,err,-
- evp,asn1,pem,x509,x509v3,conf,txt_db,pkcs7,pkcs12,comp,ocsp,ui,-
- cms,pqueue,ts,jpake,srp,store,cmac
-$
-$! One of the best way to figure out what the list should be is to do
-$! the following on a Unix system:
-$! grep OPENSSL_NO_ crypto/include/internal/*.h crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq
-$! For that reason, the list will also always end up in alphabetical order
-$ CONFIG_LOGICALS := AES,-
- ASM,INLINE_ASM,-
- BF,-
- CAMELLIA,-
- CAST,-
- CMS,-
- COMP,-
- DEPRECATED,-
- DES,-
- DGRAM,-
- DH,-
- DSA,-
- EC,-
- EC2M,-
- ECDH,-
- ECDSA,-
- EC_NISTP_64_GCC_128,-
- ENGINE,-
- ERR,-
- GMP,-
- GOST,-
- HEARTBEATS,-
- HMAC,-
- IDEA,-
- JPAKE,-
- MD2,-
- MD4,-
- MD5,-
- MDC2,-
- NEXTPROTONEG,-
- OCB,-
- OCSP,-
- PSK,-
- RC2,-
- RC4,-
- RC5,-
- RFC3779,-
- RMD160,-
- RSA,-
- SCT,-
- SCRYPT,-
- SCTP,-
- SEED,-
- SOCK,-
- SRP,-
- SRTP,-
- SSL3_METHOD,-
- SSL_TRACE,-
- STATIC_ENGINE,-
- STDIO,-
- STORE,-
- UNIT_TEST,-
- WHIRLPOOL
-$ CONFIG_EXPERIMENTAL := JPAKE,-
- STORE
-$! The following rules, which dictate how some algorithm choices affect
-$! others, are picked from Configure.
-$! Quick syntax:
-$! list = item[ ; list]
-$! item = algos / dependents
-$! algos = algo [, algos]
-$! dependents = dependent [, dependents]
-$! When a list of algos is specified in one item, it means that they must
-$! all be disabled for the rule to apply.
-$! When a list of dependents is specified in one item, it means that they
-$! will all be disabled if the rule applies.
-$! Rules are checked sequentially. If a rule disables an algorithm, it will
-$! affect all following rules that depend on that algorithm being disabled.
-$! To force something to be enabled or disabled, have no algorithms in the
-$! algos part.
-$ CONFIG_DISABLE_RULES := RIJNDAEL/AES;-
- RMD160/RIPEMD;-
- DES/MDC2;-
- EC/ECDSA,ECDH;-
- MD5/SSL3,TLS1;-
- SHA/SSL3,TLS1;-
- RSA,DSA/SSL3,TLS1;-
- DH/SSL3,TLS1;-
- EC/GOST;-
- DSA/GOST;-
- DH/GOST;-
- /STATIC_ENGINE;-
- /DEPRECATED;-
- /EC_NISTP_64_GCC_128;-
- /GMP;-
- /MD2;-
- /RC5;-
- /RFC3779;-
- /SCTP;-
- /SSL_TRACE;-
- /UNIT_TEST
-$ CONFIG_ENABLE_RULES := ZLIB_DYNAMIC/ZLIB;-
- /THREADS
-$
-$! Architecture specific rule addtions
-$ IF ARCH .EQS. "VAX"
-$ THEN
-$ ! Disable algorithms that require 64-bit integers in C
-$ CONFIG_DISABLE_RULES = CONFIG_DISABLE_RULES + -
- ";/GOST" + -
- ";/WHIRLPOOL"
-$ ENDIF
-$
-$! Keep track of things to remove from SDIRS, have the items surrounded
-$! with commas
-$ SKIP_SDIRS = ","
-$
-$ CONFIG_LOG_I = 0
-$ CONFIG_LOG_LOOP11:
-$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")
-$ CONFIG_LOG_I = CONFIG_LOG_I + 1
-$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP11
-$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP11_END
-$ IF F$TRNLNM("OPENSSL_NO_"+CONFIG_LOG_E)
-$ THEN
-$ CONFIG_DISABLED_'CONFIG_LOG_E' := YES
-$ CONFIG_ENABLED_'CONFIG_LOG_E' := NO
-$ CONFIG_CHANGED_'CONFIG_LOG_E' := YES
-$ IF (SKIP_SDIRS - (","+CONFIG_LOG_E+",")) .EQS. SKIP_SDIRS THEN -
- SKIP_SDIRS = SKIP_SDIRS + CONFIG_LOG_E + ","
-$ ELSE
-$ CONFIG_DISABLED_'CONFIG_LOG_E' := NO
-$ CONFIG_ENABLED_'CONFIG_LOG_E' := YES
-$ ! Because all non-experimental algorithms are assumed
-$ ! enabled by default
-$ CONFIG_CHANGED_'CONFIG_LOG_E' := NO
-$ IF (SKIP_SDIRS - (","+CONFIG_LOG_E+",")) .NES. SKIP_SDIRS THEN -
- SKIP_SDIRS = SKIP_SDIRS - (CONFIG_LOG_E + ",")
-$ ENDIF
-$ GOTO CONFIG_LOG_LOOP11
-$ CONFIG_LOG_LOOP11_END:
-$
-$ CONFIG_LOG_I = 0
-$ CONFIG_LOG_LOOP12:
-$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_EXPERIMENTAL),"TRIM")
-$ CONFIG_LOG_I = CONFIG_LOG_I + 1
-$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP12
-$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP12_END
-$ IF F$TRNLNM("OPENSSL_EXPERIMENTAL_"+CONFIG_LOG_E)
-$ THEN
-$ CONFIG_DISABLED_'CONFIG_LOG_E' := NO
-$ CONFIG_ENABLED_'CONFIG_LOG_E' := YES
-$ CONFIG_CHANGED_'CONFIG_LOG_E' := YES
-$ IF (SKIP_SDIRS - (","+CONFIG_LOG_E+",")) .NES. SKIP_SDIRS THEN -
- SKIP_SDIRS = SKIP_SDIRS - (CONFIG_LOG_E + ",")
-$ ELSE
-$ CONFIG_DISABLED_'CONFIG_LOG_E' := YES
-$ CONFIG_ENABLED_'CONFIG_LOG_E' := NO
-$ ! Because all experimental algorithms are assumed
-$ ! disabled by default
-$ CONFIG_CHANGED_'CONFIG_LOG_E' := NO
-$ IF (SKIP_SDIRS - (","+CONFIG_LOG_E+",")) .EQS. SKIP_SDIRS THEN -
- SKIP_SDIRS = SKIP_SDIRS + CONFIG_LOG_E + ","
-$ ENDIF
-$ GOTO CONFIG_LOG_LOOP12
-$ CONFIG_LOG_LOOP12_END:
-$
-$! Apply cascading disable rules
-$ CONFIG_DISABLE_I = 0
-$ CONFIG_DISABLE_LOOP0:
-$ CONFIG_DISABLE_E = F$EDIT(F$ELEMENT(CONFIG_DISABLE_I,";", -
- CONFIG_DISABLE_RULES),"TRIM")
-$ CONFIG_DISABLE_I = CONFIG_DISABLE_I + 1
-$ IF CONFIG_DISABLE_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP0
-$ IF CONFIG_DISABLE_E .EQS. ";" THEN GOTO CONFIG_DISABLE_LOOP0_END
-$
-$ CONFIG_DISABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_DISABLE_E),"TRIM")
-$ CONFIG_DISABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_DISABLE_E),"TRIM")
-$ TO_DISABLE := YES
-$ CONFIG_ALGO_I = 0
-$ CONFIG_DISABLE_LOOP1:
-$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",", -
- CONFIG_DISABLE_ALGOS),"TRIM")
-$ CONFIG_ALGO_I = CONFIG_ALGO_I + 1
-$ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP1
-$ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP1_END
-$ IF F$TYPE(CONFIG_DISABLED_'CONFIG_ALGO_E') .EQS. ""
-$ THEN
-$ TO_DISABLE := NO
-$ ELSE
-$ IF .NOT. CONFIG_DISABLED_'CONFIG_ALGO_E' THEN TO_DISABLE := NO
-$ ENDIF
-$ GOTO CONFIG_DISABLE_LOOP1
-$ CONFIG_DISABLE_LOOP1_END:
-$
-$ IF TO_DISABLE
-$ THEN
-$ CONFIG_DEPENDENT_I = 0
-$ CONFIG_DISABLE_LOOP2:
-$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",", -
- CONFIG_DISABLE_DEPENDENTS),"TRIM")
-$ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1
-$ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP2
-$ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP2_END
-$ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := YES
-$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := NO
-$ ! Better not to assume defaults at this point...
-$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
-$ IF (SKIP_SDIRS - (","+CONFIG_DEPENDENT_E+",")) .EQS. SKIP_SDIRS THEN -
- SKIP_SDIRS = SKIP_SDIRS + CONFIG_DEPENDENT_E + ","
-$ WRITE SYS$ERROR -
- "''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'"
-$ GOTO CONFIG_DISABLE_LOOP2
-$ CONFIG_DISABLE_LOOP2_END:
-$ ENDIF
-$ GOTO CONFIG_DISABLE_LOOP0
-$ CONFIG_DISABLE_LOOP0_END:
-$
-$! Apply cascading enable rules
-$ CONFIG_ENABLE_I = 0
-$ CONFIG_ENABLE_LOOP0:
-$ CONFIG_ENABLE_E = F$EDIT(F$ELEMENT(CONFIG_ENABLE_I,";", -
- CONFIG_ENABLE_RULES),"TRIM")
-$ CONFIG_ENABLE_I = CONFIG_ENABLE_I + 1
-$ IF CONFIG_ENABLE_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP0
-$ IF CONFIG_ENABLE_E .EQS. ";" THEN GOTO CONFIG_ENABLE_LOOP0_END
-$
-$ CONFIG_ENABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_ENABLE_E),"TRIM")
-$ CONFIG_ENABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_ENABLE_E),"TRIM")
-$ TO_ENABLE := YES
-$ CONFIG_ALGO_I = 0
-$ CONFIG_ENABLE_LOOP1:
-$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",", -
- CONFIG_ENABLE_ALGOS),"TRIM")
-$ CONFIG_ALGO_I = CONFIG_ALGO_I + 1
-$ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP1
-$ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP1_END
-$ IF F$TYPE(CONFIG_ENABLED_'CONFIG_ALGO_E') .EQS. ""
-$ THEN
-$ TO_ENABLE := NO
-$ ELSE
-$ IF .NOT. CONFIG_ENABLED_'CONFIG_ALGO_E' THEN TO_ENABLE := NO
-$ ENDIF
-$ GOTO CONFIG_ENABLE_LOOP1
-$ CONFIG_ENABLE_LOOP1_END:
-$
-$ IF TO_ENABLE
-$ THEN
-$ CONFIG_DEPENDENT_I = 0
-$ CONFIG_ENABLE_LOOP2:
-$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",", -
- CONFIG_ENABLE_DEPENDENTS),"TRIM")
-$ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1
-$ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP2
-$ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP2_END
-$ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := NO
-$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := YES
-$ ! Better not to assume defaults at this point...
-$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
-$ IF (SKIP_SDIRS - (","+CONFIG_DEPENDENT_E+",")) .NES. SKIP_SDIRS THEN -
- SKIP_SDIRS = SKIP_SDIRS - (CONFIG_DEPENDENT_E + ",")
-$ WRITE SYS$ERROR -
- "''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'"
-$ GOTO CONFIG_ENABLE_LOOP2
-$ CONFIG_ENABLE_LOOP2_END:
-$ ENDIF
-$ GOTO CONFIG_ENABLE_LOOP0
-$ CONFIG_ENABLE_LOOP0_END:
-$
-$! Fix SDIRS
-$ SDIRS = ","+F$EDIT(SDIRS,"COLLAPSE")+","
-$ CONFIG_SKIP_I = 0
-$ CONFIG_SDIRS_LOOP1:
-$ CONFIG_SKIP_E = F$EDIT(F$ELEMENT(CONFIG_SKIP_I,",",SKIP_SDIRS),"TRIM")
-$ CONFIG_SKIP_I = CONFIG_SKIP_I + 1
-$ IF CONFIG_SKIP_E .EQS. "" THEN GOTO CONFIG_SDIRS_LOOP1
-$ IF CONFIG_SKIP_E .EQS. "," THEN GOTO CONFIG_SDIRS_LOOP1_END
-$ IF (SDIRS - (","+CONFIG_SKIP_E+",")) .NES. SDIRS THEN -
- SDIRS = SDIRS - (CONFIG_SKIP_E+",")
-$ GOTO CONFIG_SDIRS_LOOP1
-$ CONFIG_SDIRS_LOOP1_END:
-$
-$! Write to the configuration
-$ CONFIG_LOG_I = 0
-$ CONFIG_LOG_LOOP2:
-$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")
-$ CONFIG_LOG_I = CONFIG_LOG_I + 1
-$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP2
-$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP2_END
-$ IF CONFIG_DISABLED_'CONFIG_LOG_E'
-$ THEN
-$ WRITE H_FILE "#ifndef OPENSSL_NO_",CONFIG_LOG_E
-$ WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E
-$ WRITE H_FILE "#endif"
-$ ELSE
-$ IF CONFIG_CHANGED_'CONFIG_LOG_E'
-$ THEN
-$ WRITE H_FILE "#ifndef OPENSSL_EXPERIMENTAL_",CONFIG_LOG_E
-$ WRITE H_FILE "# ifndef OPENSSL_NO_",CONFIG_LOG_E
-$ WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E
-$ WRITE H_FILE "# endif"
-$ WRITE H_FILE "#endif"
-$
-$ IF F$TYPE(USER_CCDEFS) .NES. ""
-$ THEN
-$ USER_CCDEFS = USER_CCDEFS + ",OPENSSL_EXPERIMENTAL_" + CONFIG_LOG_E
-$ ELSE
-$ USER_CCDEFS = "OPENSSL_EXPERIMENTAL_" + CONFIG_LOG_E
-$ ENDIF
-$ ENDIF
-$ ENDIF
-$ GOTO CONFIG_LOG_LOOP2
-$ CONFIG_LOG_LOOP2_END:
-$
-$ WRITE/SYMBOL SYS$ERROR "SDIRS = """,SDIRS,""""
-$!
-$ WRITE H_FILE ""
-$ WRITE H_FILE "/* STCP support comes with TCPIP 5.7 ECO 2 "
-$ WRITE H_FILE " * enable on newer systems / 2012-02-24 arpadffy */"
-$ WRITE H_FILE "#define OPENSSL_NO_SCTP"
-$ WRITE H_FILE ""
-$!
-$! Add in the common "crypto/opensslconf.h.in".
-$!
-$ TYPE 'OPENSSLCONF_H_IN' /OUTPUT=H_FILE:
-$!
-$ IF ARCH .NES. "VAX"
-$ THEN
-$!
-$! Write the non-VAX specific data
-$!
-$ WRITE H_FILE "#if defined(HEADER_RC4_H)"
-$ WRITE H_FILE "#undef RC4_INT"
-$ WRITE H_FILE "#define RC4_INT unsigned int"
-$ WRITE H_FILE "#endif"
-$!
-$ WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)"
-$ WRITE H_FILE "typedef unsigned int OSSL_DES_LONG;"
-$ WRITE H_FILE "#endif"
-$!
-$ WRITE H_FILE "#if defined(HEADER_BN_H)"
-$ WRITE H_FILE "#undef BN_LLONG" ! Never define with SIXTY_FOUR_BIT
-$ WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG"
-$ WRITE H_FILE "#undef SIXTY_FOUR_BIT"
-$ WRITE H_FILE "#define SIXTY_FOUR_BIT"
-$ WRITE H_FILE "#undef THIRTY_TWO_BIT"
-$ WRITE H_FILE "#endif"
-$
-$ WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Write the VAX specific data
-$!
-$ WRITE H_FILE "#if defined(HEADER_RC4_H)"
-$ WRITE H_FILE "#undef RC4_INT"
-$ WRITE H_FILE "#define RC4_INT unsigned char"
-$ WRITE H_FILE "#endif"
-$!
-$ WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)"
-$ WRITE H_FILE "typedef unsigned int OSSL_DES_LONG;"
-$ WRITE H_FILE "#endif"
-$!
-$ WRITE H_FILE "#if defined(HEADER_BN_H)"
-$ WRITE H_FILE "#undef BN_LLONG" ! VAX C/DEC C doesn't have long long
-$ WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG"
-$ WRITE H_FILE "#undef SIXTY_FOUR_BIT"
-$ WRITE H_FILE "#undef THIRTY_TWO_BIT"
-$ WRITE H_FILE "#define THIRTY_TWO_BIT"
-$ WRITE H_FILE "#endif"
-$!
-$ WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"
-$ WRITE H_FILE "#define OPENSSL_EXPORT_VAR_AS_FUNCTION"
-$!
-$! End
-$!
-$ ENDIF
-$!
-$! Close the [.CRYPTO._xxx]OPENSSLCONF.H file
-$!
-$ CLOSE H_FILE
-$!
-$! Purge The [.CRYPTO._xxx]OPENSSLCONF.H file
-$!
-$ PURGE SYS$DISK:[.CRYPTO.'ARCHD']OPENSSLCONF.H
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Rebuild The "[.CRYPTO._xxx]BUILDINF.H" file.
-$!
-$ BUILDINF:
-$!
-$! Tell The User We Are Creating The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ WRITE SYS$OUTPUT "Creating [.CRYPTO.''ARCHD']BUILDINF.H Include File."
-$!
-$! Create The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ BIH_NAME = "SYS$DISK:[.CRYPTO.''ARCHD']BUILDINF.H"
-$ CREATE /FDL=SYS$INPUT: 'BIH_NAME'
-RECORD
- FORMAT stream_lf
-$!
-$ OPEN /APPEND H_FILE 'bih_name'
-$!
-$! Get The Current Date & Time.
-$!
-$ TIME = F$TIME()
-$!
-$! Write The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ CFLAGS = ""
-$ if (POINTER_SIZE .nes. "")
-$ then
-$ CFLAGS = CFLAGS+ "/POINTER_SIZE=''POINTER_SIZE'"
-$ endif
-$ if (ZLIB .nes. "")
-$ then
-$ if (CFLAGS .nes. "") then CFLAGS = CFLAGS+ " "
-$ CFLAGS = CFLAGS+ "/DEFINE=ZLIB"
-$ endif
-$!
-$ WRITE H_FILE "#define CFLAGS ""''CFLAGS'"""
-$ WRITE H_FILE "#define PLATFORM ""VMS ''ARCHD' ''VMS_VERSION'"""
-$ WRITE H_FILE "#define DATE ""''TIME'"" "
-$!
-$! Close The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ CLOSE H_FILE
-$!
-$! Purge The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ PURGE SYS$DISK:[.CRYPTO.'ARCHD']BUILDINF.H
-$!
-$! Delete [.CRYPTO]BUILDINF.H File, as there might be some residue from Unix.
-$!
-$ IF F$SEARCH("[.CRYPTO]BUILDINF.H") .NES. "" THEN -
- DELETE SYS$DISK:[.CRYPTO]BUILDINF.H;*
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Copy a lot of files around.
-$!
-$ SOFTLINKS:
-$!
-$!!!! Tell The User We Are Partly Rebuilding The [.APPS] Directory.
-$!!!!
-$!!! WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C', '[.APPS]MD5.C' And '[.APPS]RD160.C' Files."
-$!!!!
-$!!! DELETE SYS$DISK:[.APPS]MD4.C;*,MD5.C;*,RMD160.C;*
-$!!!!
-$!!!! Copy MD4.C from [.CRYPTO.MD4] into [.APPS]
-$!!!!
-$!!! COPY SYS$DISK:[.CRYPTO.MD4]MD4.C SYS$DISK:[.APPS]
-$!!!!
-$!!!! Copy MD5.C from [.CRYPTO.MD5] into [.APPS]
-$!!!! Tell The User We Are Rebuilding The [.include.openssl] Directory.
-$!!!!
-$!!!! Copy RMD160.C from [.CRYPTO.RIPEMD] into [.APPS]
-$!!!!
-$!!! COPY SYS$DISK:[.CRYPTO.RIPEMD]RMD160.C SYS$DISK:[.APPS]
-$!
-$! Ensure that the [.include.openssl] directory contains a full set of
-$! real header files. The distribution kit may have left real or fake
-$! symlinks there. Rather than think about what's there, simply delete
-$! the destination files (fake or real symlinks) before copying the real
-$! header files in. (Copying a real header file onto a real symlink
-$! merely duplicates the real header file at its source.)
-$!
-$! Tell The User We Are Rebuilding The [.include.openssl] Directory.
-$!
-$ WRITE SYS$OUTPUT "Rebuilding The '[.include.openssl]' Directory."
-$!
-$! First, make sure the directory exists. If it did exist, delete all
-$! the existing header files (or fake or real symlinks).
-$!
-$ if f$parse( "sys$disk:[.include.openssl]") .eqs. ""
-$ then
-$ create /directory sys$disk:[.include.openssl]
-$ else
-$ delete sys$disk:[.include.openssl]*.h;*
-$ endif
-$!
-$! Copy All The ".H" Files From The Main Directory.
-$!
-$ EXHEADER := e_os2.h
-$ copy 'exheader' sys$disk:[.include.openssl]
-$!
-$! Copy All The ".H" Files From The [.CRYPTO] Directory Tree.
-$!
-$ HEADER_SDIRS := , -
- 'ARCHD', -
- OBJECTS, -
- MD2, MD4, MD5, SHA, MDC2, HMAC, RIPEMD, WHRLPOOL, -
- DES, AES, RC2, RC4, RC5, IDEA, BF, CAST, CAMELLIA, SEED, MODES, -
- BN, EC, RSA, DSA, ECDSA, DH, ECDH, DSO, ENGINE, -
- BUFFER, BIO, STACK, LHASH, RAND, ERR, -
- EVP, ASN1, PEM, X509, X509V3, CONF, TXT_DB, PKCS7, PKCS12, -
- COMP, OCSP, UI, -
- CMS, PQUEUE, TS, JPAKE, SRP, STORE, CMAC
-$!
-$ EXHEADER_ := crypto.h, opensslv.h, ebcdic.h, symhacks.h, ossl_typ.h
-$ EXHEADER_'ARCHD' := opensslconf.h
-$ EXHEADER_OBJECTS := objects.h, obj_mac.h
-$ EXHEADER_MD2 := md2.h
-$ EXHEADER_MD4 := md4.h
-$ EXHEADER_MD5 := md5.h
-$ EXHEADER_SHA := sha.h
-$ EXHEADER_MDC2 := mdc2.h
-$ EXHEADER_HMAC := hmac.h
-$ EXHEADER_RIPEMD := ripemd.h
-$ EXHEADER_WHRLPOOL := whrlpool.h
-$ EXHEADER_DES := des.h
-$ EXHEADER_AES := aes.h
-$ EXHEADER_RC2 := rc2.h
-$ EXHEADER_RC4 := rc4.h
-$ EXHEADER_RC5 := rc5.h
-$ EXHEADER_IDEA := idea.h
-$ EXHEADER_BF := blowfish.h
-$ EXHEADER_CAST := cast.h
-$ EXHEADER_CAMELLIA := camellia.h
-$ EXHEADER_SEED := seed.h
-$ EXHEADER_MODES := modes.h
-$ EXHEADER_BN := bn.h
-$ EXHEADER_EC := ec.h
-$ EXHEADER_RSA := rsa.h
-$ EXHEADER_DSA := dsa.h
-$ EXHEADER_ECDSA := ecdsa.h
-$ EXHEADER_DH := dh.h
-$ EXHEADER_ECDH := ecdh.h
-$ EXHEADER_DSO := dso.h
-$ EXHEADER_ENGINE := engine.h
-$ EXHEADER_BUFFER := buffer.h
-$ EXHEADER_BIO := bio.h
-$ EXHEADER_STACK := stack.h, safestack.h
-$ EXHEADER_LHASH := lhash.h
-$ EXHEADER_RAND := rand.h
-$ EXHEADER_ERR := err.h
-$ EXHEADER_EVP := evp.h
-$ EXHEADER_ASN1 := asn1.h, asn1_mac.h, asn1t.h
-$ EXHEADER_PEM := pem.h, pem2.h
-$ EXHEADER_X509 := x509.h, x509_vfy.h
-$ EXHEADER_X509V3 := x509v3.h
-$ EXHEADER_CONF := conf.h, conf_api.h
-$ EXHEADER_TXT_DB := txt_db.h
-$ EXHEADER_PKCS7 := pkcs7.h
-$ EXHEADER_PKCS12 := pkcs12.h
-$ EXHEADER_COMP := comp.h
-$ EXHEADER_OCSP := ocsp.h
-$ EXHEADER_UI := ui.h
-$ EXHEADER_CMS := cms.h
-$ EXHEADER_PQUEUE := pqueue.h
-$ EXHEADER_TS := ts.h
-$ EXHEADER_JPAKE := jpake.h
-$ EXHEADER_SRP := srp.h
-$!!! EXHEADER_STORE := store.h, str_compat.h
-$ EXHEADER_STORE := store.h
-$ EXHEADER_CMAC := cmac.h
-$!
-$ i = 0
-$ loop_header_sdirs:
-$ sdir = f$edit( f$element( i, ",", header_sdirs), "trim")
-$ i = i + 1
-$ if (sdir .eqs. ",") then goto loop_header_sdirs_end
-$ hdr_list = exheader_'sdir'
-$ if (sdir .nes. "") then sdir = "."+ sdir
-$ copy [.crypto'sdir']'hdr_list' sys$disk:[.include.openssl]
-$ goto loop_header_sdirs
-$ loop_header_sdirs_end:
-$!
-$! Copy All The ".H" Files From The [.SSL] Directory.
-$!
-$! (keep these in the same order as ssl/Makefile)
-$ EXHEADER := ssl.h, ssl2.h, ssl3.h, ssl23.h, tls1.h, dtls1.h, srtp.h
-$ copy sys$disk:[.ssl]'exheader' sys$disk:[.include.openssl]
-$!
-$! Purge the [.include.openssl] header files.
-$!
-$ purge sys$disk:[.include.openssl]*.h
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The "[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO''LIB32'.OLB" Library.
-$!
-$ CRYPTO:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT -
- "Building The [.",ARCHD,".EXE.CRYPTO]SSL_LIBCRYPTO''LIB32'.OLB Library."
-$!
-$! Go To The [.CRYPTO] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.CRYPTO]
-$!
-$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
-$!
-$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
- "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The "[.xxx.EXE.SSL]SSL_LIBSSL''LIB32'.OLB" Library.
-$!
-$ SSL:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT -
- "Building The [.",ARCHD,".EXE.SSL]SSL_LIBSSL''LIB32'.OLB Library."
-$!
-$! Go To The [.SSL] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.SSL]
-$!
-$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.
-$!
-$ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
- "''ISSEVEN'" "''POINTER_SIZE'" "''ZLIB'"
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! Time To Return.
-$!
-$ RETURN
-$!
-$! Build The OpenSSL Test Programs.
-$!
-$ TEST:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building The OpenSSL [.",ARCHD,".EXE.TEST] Test Utilities."
-$!
-$! Go To The [.TEST] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.TEST]
-$!
-$! Build The Test Programs.
-$!
-$ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" -
- "''POINTER_SIZE'" "''ZLIB'"
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The OpenSSL Application Programs.
-$!
-$ APPS:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCHD,".EXE.APPS] Applications."
-$!
-$! Go To The [.APPS] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.APPS]
-$!
-$! Build The Application Programs.
-$!
-$ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" -
- "" "''POINTER_SIZE'" "''ZLIB'"
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The OpenSSL Application Programs.
-$!
-$ ENGINES:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCHD,".EXE.ENGINES] Engines."
-$!
-$! Go To The [.ENGINES] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.ENGINES]
-$!
-$! Build The Application Programs.
-$!
-$ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
- "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Check The User's Options.
-$!
-$ CHECK_OPTIONS:
-$!
-$! Check if there's a "part", and separate it out
-$!
-$ BUILDPART = F$ELEMENT(1,"/",P1)
-$ IF BUILDPART .EQS. "/"
-$ THEN
-$ BUILDPART = ""
-$ ELSE
-$ P1 = F$EXTRACT(0,F$LENGTH(P1) - F$LENGTH(BUILDPART) - 1, P1)
-$ ENDIF
-$!
-$! Check To See If P1 Is Blank.
-$!
-$ IF (P1.EQS."ALL")
-$ THEN
-$!
-$! P1 Is ALL, So Build Everything.
-$!
-$ BUILDCOMMAND = "ALL"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Else, Check To See If P1 Has A Valid Argument.
-$!
-$ IF (P1.EQS."CONFIG").OR.(P1.EQS."BUILDINF").OR.(P1.EQS."SOFTLINKS") -
- .OR.(P1.EQS."BUILDALL") -
- .OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL") -
- .OR.(P1.EQS."TEST").OR.(P1.EQS."APPS") -
- .OR.(P1.EQS."ENGINES")
-$ THEN
-$!
-$! A Valid Argument.
-$!
-$ BUILDCOMMAND = P1
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "USAGE: @MAKEVMS.COM [Target] [Pointer size] [Debug option] <Compiler>"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Example: @MAKEVMS.COM ALL """" NODEBUG "
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Target ",P1," Is Invalid. The Valid Target Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " ALL : Just Build Everything."
-$ WRITE SYS$OUTPUT " CONFIG : Just build the [.CRYPTO._xxx]OPENSSLCONF.H file."
-$ WRITE SYS$OUTPUT " BUILDINF : Just build the [.CRYPTO._xxx]BUILDINF.H file."
-$ WRITE SYS$OUTPUT " SOFTLINKS: Just Fix The Unix soft links."
-$ WRITE SYS$OUTPUT " BUILDALL : Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done."
-$ WRITE SYS$OUTPUT " CRYPTO : To Build Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
-$ WRITE SYS$OUTPUT " CRYPTO/x : To Build Just The x Part Of The"
-$ WRITE SYS$OUTPUT " [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
-$ WRITE SYS$OUTPUT " SSL : To Build Just The [.xxx.EXE.SSL]LIBSSL.OLB Library."
-$ WRITE SYS$OUTPUT " TEST : To Build Just The OpenSSL Test Programs."
-$ WRITE SYS$OUTPUT " APPS : To Build Just The OpenSSL Application Programs."
-$ WRITE SYS$OUTPUT " ENGINES : To Build Just The ENGINES"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " Where 'xxx' Stands For:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " ALPHA[64]: Alpha Architecture."
-$ WRITE SYS$OUTPUT " IA64[64] : IA64 Architecture."
-$ WRITE SYS$OUTPUT " VAX : VAX Architecture."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ GOTO TIDY
-$!
-$! End The Valid Argument Check.
-$!
-$ ENDIF
-$!
-$! End The P1 Check.
-$!
-$ ENDIF
-$!
-$! Check P2 (POINTER_SIZE).
-$!
-$ IF (P2 .NES. "") .AND. (ARCH .NES. "VAX")
-$ THEN
-$!
-$ IF (P2 .EQS. "32")
-$ THEN
-$ POINTER_SIZE = "32"
-$ ELSE
-$ POINTER_SIZE = F$EDIT( P2, "COLLAPSE, UPCASE")
-$ IF ((POINTER_SIZE .EQS. "64") .OR. -
- (POINTER_SIZE .EQS. "64=") .OR. -
- (POINTER_SIZE .EQS. "64=ARGV"))
-$ THEN
-$ ARCHD = ARCH+ "_64"
-$ LIB32 = ""
-$ ELSE
-$!
-$! Tell The User Entered An Invalid Option.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ", P2, -
- " Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT -
- " """" : Compile with default (short) pointers."
-$ WRITE SYS$OUTPUT -
- " 32 : Compile with 32-bit (short) pointers."
-$ WRITE SYS$OUTPUT -
- " 64 : Compile with 64-bit (long) pointers (auto ARGV)."
-$ WRITE SYS$OUTPUT -
- " 64= : Compile with 64-bit (long) pointers (no ARGV)."
-$ WRITE SYS$OUTPUT -
- " 64=ARGV : Compile with 64-bit (long) pointers (ARGV)."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ GOTO TIDY
-$!
-$ ENDIF
-$!
-$ ENDIF
-$!
-$! End The P2 (POINTER_SIZE) Check.
-$!
-$ ENDIF
-$!
-$! Check To See If P3 Is Blank.
-$!
-$ IF (P3.EQS."NODEBUG")
-$ THEN
-$!
-$! P3 Is NODEBUG, So Compile Without Debugger Information.
-$!
-$ DEBUGGER = "NODEBUG"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Check To See If We Are To Compile With Debugger Information.
-$!
-$ IF (P3.EQS."DEBUG")
-$ THEN
-$!
-$! Compile With Debugger Information.
-$!
-$ DEBUGGER = "DEBUG"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Tell The User Entered An Invalid Option.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information."
-$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ GOTO TIDY
-$!
-$! End The Valid Argument Check.
-$!
-$ ENDIF
-$!
-$! End The P3 Check.
-$!
-$ ENDIF
-$!
-$! Check To See If P4 Is Blank.
-$!
-$ IF (P4.EQS."")
-$ THEN
-$!
-$! O.K., The User Didn't Specify A Compiler, Let's Try To
-$! Find Out Which One To Use.
-$!
-$! Check To See If We Have GNU C.
-$!
-$ IF (F$TRNLNM("GNU_CC").NES."")
-$ THEN
-$!
-$! Looks Like GNUC, Set To Use GNUC.
-$!
-$ COMPILER = "GNUC"
-$!
-$! Tell The User We Are Using GNUC.
-$!
-$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
-$!
-$! End The GNU C Compiler Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Have VAXC Or DECC.
-$!
-$ IF (F$GETSYI("CPU").GE.128).OR.(F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC")
-$ THEN
-$!
-$! Looks Like DECC, Set To Use DECC.
-$!
-$ COMPILER = "DECC"
-$!
-$! Tell The User We Are Using DECC.
-$!
-$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Looks Like VAXC, Set To Use VAXC.
-$!
-$ COMPILER = "VAXC"
-$!
-$! Tell The User We Are Using VAX C.
-$!
-$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
-$!
-$! End The DECC & VAXC Compiler Check.
-$!
-$ ENDIF
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Check To See If The User Entered A Valid Parameter.
-$!
-$ IF (P4.EQS."VAXC").OR.(P4.EQS."DECC").OR.(P4.EQS."GNUC")!.OR.(P4.EQS."LINK")
-$ THEN
-$!
-$! Check To See If The User Wanted To Just LINK.
-$!
-$ IF (P4.EQS."LINK")
-$ THEN
-$!
-$! Looks Like LINK-only
-$!
-$ COMPILER = "LINK"
-$!
-$! Tell The User We Are Only Linking.
-$!
-$ WRITE SYS$OUTPUT "LINK Only. This actually NOT YET SUPPORTED!"
-$!
-$! End LINK Check.
-$!
-$ ENDIF
-$!
-$! Check To See If The User Wanted DECC.
-$!
-$ IF (P4.EQS."DECC")
-$ THEN
-$!
-$! Looks Like DECC, Set To Use DECC.
-$!
-$ COMPILER = "DECC"
-$!
-$! Tell The User We Are Using DECC.
-$!
-$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
-$!
-$! End DECC Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Are To Use VAXC.
-$!
-$ IF (P4.EQS."VAXC")
-$ THEN
-$!
-$! Looks Like VAXC, Set To Use VAXC.
-$!
-$ COMPILER = "VAXC"
-$!
-$! Tell The User We Are Using VAX C.
-$!
-$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
-$!
-$! End VAXC Check
-$!
-$ ENDIF
-$!
-$! Check To See If We Are To Use GNU C.
-$!
-$ IF (P4.EQS."GNUC")
-$ THEN
-$!
-$! Looks Like GNUC, Set To Use GNUC.
-$!
-$ COMPILER = "GNUC"
-$!
-$! Tell The User We Are Using GNUC.
-$!
-$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
-$!
-$! End The GNU C Check.
-$!
-$ ENDIF
-$!
-$! Else The User Entered An Invalid Argument.
-$!
-$ ELSE
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P4," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C."
-$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C."
-$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ GOTO TIDY
-$!
-$! End The Valid Argument Check.
-$!
-$ ENDIF
-$!
-$! End The P4 Check.
-$!
-$ ENDIF
-$!
-$! Time to check the contents of P5, and to make sure we get the correct
-$! library.
-$!
-$ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX" -
- .OR. P5.EQS."TCPIP" .OR. P5.EQS."NONE"
-$ THEN
-$!
-$! Check to see if SOCKETSHR was chosen
-$!
-$ IF P5.EQS."SOCKETSHR"
-$ THEN
-$!
-$! Set the library to use SOCKETSHR
-$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP"
-$!
-$! Done with SOCKETSHR
-$!
-$ ENDIF
-$!
-$! Check to see if MULTINET was chosen
-$!
-$ IF P5.EQS."MULTINET"
-$ THEN
-$!
-$! Set the library to use UCX emulation.
-$!
-$ P5 = "UCX"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using MultiNet via UCX emulation for TCP/IP"
-$!
-$! Done with MULTINET
-$!
-$ ENDIF
-$!
-$! Check to see if UCX was chosen
-$!
-$ IF P5.EQS."UCX"
-$ THEN
-$!
-$! Set the library to use UCX.
-$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP"
-$!
-$! Done with UCX
-$!
-$ ENDIF
-$!
-$! Check to see if TCPIP was chosen
-$!
-$ IF P5.EQS."TCPIP"
-$ THEN
-$!
-$! Set the library to use TCPIP (post UCX).
-$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using TCPIP (post UCX) for TCP/IP"
-$!
-$! Done with TCPIP
-$!
-$ ENDIF
-$!
-$! Check to see if NONE was chosen
-$!
-$ IF P5.EQS."NONE"
-$ THEN
-$!
-$! Do not use a TCPIP library.
-$!
-$ TCPIP_LIB = ""
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "A specific TCPIP library will not be used."
-$!
-$! Done with NONE.
-$!
-$ ENDIF
-$!
-$! Set the TCPIP_TYPE symbol
-$!
-$ TCPIP_TYPE = P5
-$!
-$! Print info
-$!
-$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
-$!
-$! Else The User Entered An Invalid Argument.
-$!
-$ ELSE
-$ IF P5 .NES. ""
-$ THEN
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P5," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library."
-$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library."
-$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP TCP/IP (post UCX) library."
-$ WRITE SYS$OUTPUT " NONE : To not link with a specific TCP/IP library."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ GOTO TIDY
-$ ELSE
-$!
-$! If TCPIP is not defined, then hardcode it to make
-$! it clear that no TCPIP is desired.
-$!
-$ IF P5 .EQS. ""
-$ THEN
-$ TCPIP_LIB = ""
-$ TCPIP_TYPE = "NONE"
-$ ELSE
-$!
-$! Set the TCPIP_TYPE symbol
-$!
-$ TCPIP_TYPE = P5
-$ ENDIF
-$ ENDIF
-$!
-$! Done with TCP/IP libraries
-$!
-$ ENDIF
-$!
-$! Special Threads For OpenVMS v7.1 Or Later
-$!
-$! Written By: Richard Levitte
-$! richard@levitte.org
-$!
-$!
-$! Check To See If We Have A Option For P6.
-$!
-$ IF (P6.EQS."")
-$ THEN
-$!
-$! Get The Version Of VMS We Are Using.
-$!
-$ ISSEVEN :=
-$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,VMS_VERSION))
-$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))
-$!
-$! Check To See If The VMS Version Is v7.1 Or Later.
-$!
-$ IF (TMP.GE.71)
-$ THEN
-$!
-$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads.
-$!
-$ ISSEVEN := ,PTHREAD_USE_D4
-$!
-$! End The VMS Version Check.
-$!
-$ ENDIF
-$!
-$! End The P6 Check.
-$!
-$ ENDIF
-$!
-$!
-$! Check To See If We Have A ZLIB Option.
-$!
-$ ZLIB = P7
-$ IF (ZLIB .NES. "")
-$ THEN
-$!
-$! Check for expected ZLIB files.
-$!
-$ err = 0
-$ file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY")
-$ if (f$search( file1) .eqs. "")
-$ then
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
-$ WRITE SYS$OUTPUT " Can't find header: ''file1'"
-$ err = 1
-$ endif
-$!
-$ file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY")
-$ if (f$search( file2) .eqs. "")
-$ then
-$ if (err .eq. 0)
-$ then
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid."
-$ endif
-$ WRITE SYS$OUTPUT " Can't find library: ''file2'"
-$ WRITE SYS$OUTPUT ""
-$ err = err+ 2
-$ endif
-$ if (err .eq. 1)
-$ then
-$ WRITE SYS$OUTPUT ""
-$ endif
-$!
-$ if (err .ne. 0)
-$ then
-$ GOTO TIDY
-$ endif
-$!
-$! Print info
-$!
-$ WRITE SYS$OUTPUT "ZLIB library spec: ", file2
-$!
-$! End The ZLIB Check.
-$!
-$ ENDIF
-$!
-$! Time To RETURN...
-$!
-$ RETURN
-$!
-$ TIDY:
-$!
-$! Close any open files.
-$!
-$ if (f$trnlnm( "h_file", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then -
- close h_file
-$!
-$! Restore the original default device:[directory].
-$!
-$ SET DEFAULT 'DEF_ORIG'
-$!
-$ EXIT
-$!
projects / openssl.git / blobdiff