[B<-out filename>]
[B<-serial>]
[B<-hash>]
+[B<-subject_hash>]
+[B<-issuer_hash>]
[B<-subject>]
[B<-issuer>]
[B<-nameopt option>]
[B<-email>]
+[B<-ocsp_uri>]
[B<-startdate>]
[B<-enddate>]
[B<-purpose>]
[B<-addreject arg>]
[B<-setalias arg>]
[B<-days arg>]
+[B<-set_serial n>]
[B<-signkey filename>]
[B<-x509toreq>]
[B<-req>]
[B<-clrext>]
[B<-extfile filename>]
[B<-extensions section>]
+[B<-engine id>]
=head1 DESCRIPTION
Since there are a large number of options they will split up into
various sections.
+=head1 OPTIONS
-=head1 INPUT, OUTPUT AND GENERAL PURPOSE OPTIONS
+=head2 INPUT, OUTPUT AND GENERAL PURPOSE OPTIONS
=over 4
the digest to use. This affects any signing or display option that uses a message
digest, such as the B<-fingerprint>, B<-signkey> and B<-CA> options. If not
-specified then MD5 is used. If the key being used to sign with is a DSA key then
-this option has no effect: SHA1 is always used with DSA keys.
+specified then SHA1 is used. If the key being used to sign with is a DSA key
+then this option has no effect: SHA1 is always used with DSA keys.
+=item B<-engine id>
+
+specifying an engine (by its unique B<id> string) will cause B<x509>
+to attempt to obtain a functional reference to the specified engine,
+thus initialising it if needed. The engine will then be set as the default
+for all available algorithms.
=back
-=head1 DISPLAY OPTIONS
+=head2 DISPLAY OPTIONS
Note: the B<-alias> and B<-purpose> options are also display options
-but are described in the B<TRUST OPTIONS> section.
+but are described in the B<TRUST SETTINGS> section.
=over 4
public key, signature algorithms, issuer and subject names, serial number
any extensions present and any trust settings.
+=item B<-certopt option>
+
+customise the output format used with B<-text>. The B<option> argument can be
+a single option or multiple options separated by commas. The B<-certopt> switch
+may be also be used more than once to set multiple options. See the B<TEXT OPTIONS>
+section for more information.
+
=item B<-noout>
this option prevents output of the encoded version of the request.
outputs the certificate serial number.
-=item B<-hash>
+=item B<-subject_hash>
outputs the "hash" of the certificate subject name. This is used in OpenSSL to
form an index to allow certificates in a directory to be looked up by subject
name.
+=item B<-issuer_hash>
+
+outputs the "hash" of the certificate issuer name.
+
+=item B<-hash>
+
+synonym for "-subject_hash" for backward compatibility reasons.
+
+=item B<-subject_hash_old>
+
+outputs the "hash" of the certificate subject name using the older algorithm
+as used by OpenSSL versions before 1.0.0.
+
+=item B<-issuer_hash_old>
+
+outputs the "hash" of the certificate issuer name using the older algorithm
+as used by OpenSSL versions before 1.0.0.
+
=item B<-subject>
outputs the subject name.
=item B<-nameopt option>
-option which determine how the subject or issuer names are displayed. This
-option may be used more than once to set multiple options. See the B<NAME
-OPTIONS> section for more information.
+option which determines how the subject or issuer names are displayed. The
+B<option> argument can be a single option or multiple options separated by
+commas. Alternatively the B<-nameopt> switch may be used more than once to
+set multiple options. See the B<NAME OPTIONS> section for more information.
=item B<-email>
outputs the email address(es) if any.
+=item B<-ocsp_uri>
+
+outputs the OCSP responder address(es) if any.
+
=item B<-startdate>
prints out the start date of the certificate, that is the notBefore date.
=item B<-fingerprint>
-prints out the digest of the DER encoded version of the whole certificate.
+prints out the digest of the DER encoded version of the whole certificate
+(see digest options).
=item B<-C>
=back
-=head1 TRUST SETTINGS
+=head2 TRUST SETTINGS
Please note these options are currently experimental and may well change.
=back
-=head1 SIGNING OPTIONS
+=head2 SIGNING OPTIONS
The B<x509> utility can be used to sign certificates and requests: it
can thus behave like a "mini CA".
by default a certificate is expected on input. With this option a
certificate request is expected instead.
+=item B<-set_serial n>
+
+specifies the serial number to use. This option can be used with either
+the B<-signkey> or B<-CA> options. If used in conjunction with the B<-CA>
+option the serial number file (as specified by the B<-CAserial> or
+B<-CAcreateserial> options) is not used.
+
+The serial number can be decimal or hex (if preceded by B<0x>). Negative
+serial numbers can also be specified but their use is not recommended.
+
=item B<-CA filename>
specifies the CA certificate to be used for signing. When this option is
".srl" appended. For example if the CA certificate file is called
"mycacert.pem" it expects to find a serial number file called "mycacert.srl".
-=item B<-CAcreateserial filename>
+=item B<-CAcreateserial>
with this option the CA serial number file is created if it does not exist:
it will contain the serial number "02" and the certificate being signed will
the section to add certificate extensions from. If this option is not
specified then the extensions should either be contained in the unnamed
(default) section or the default section should contain a variable called
-"extensions" which contains the section to use.
+"extensions" which contains the section to use. See the
+L<x509v3_config(5)|x509v3_config(5)> manual page for details of the
+extension section format.
=back
-=head1 NAME OPTIONS
+=head2 NAME OPTIONS
The B<nameopt> command line switch determines how the subject and issuer
names are displayed. If no B<nameopt> switch is present the default "oneline"
a oneline format which is more readable than RFC2253. It is equivalent to
specifying the B<esc_2253>, B<esc_ctrl>, B<esc_msb>, B<utf8>, B<dump_nostr>,
-B<dump_der>, B<use_quote>, B<sep_comma_plus_spc>, B<spc_eq> and B<sname>
+B<dump_der>, B<use_quote>, B<sep_comma_plus_space>, B<space_eq> and B<sname>
options.
=item B<multiline>
a multiline format. It is equivalent B<esc_ctrl>, B<esc_msb>, B<sep_multiline>,
-B<spc_eq> and B<lname>.
+B<space_eq>, B<lname> and B<align>.
=item B<esc_2253>
escape the "special" characters required by RFC2253 in a field That is
-B<,+"E<lt>E<gt>;>. Additionally B<#> is escaped at the beginnging of a string
+B<,+"E<lt>E<gt>;>. Additionally B<#> is escaped at the beginning of a string
and a space character at the beginning or end of a string.
=item B<esc_ctrl>
dump non character string types (for example OCTET STRING) if this
option is not set then non character string types will be displayed
-as though each content octet repesents a single character.
+as though each content octet represents a single character.
=item B<dump_all>
B<oid> represents the OID in numerical form and is useful for
diagnostic purpose.
-=item B<spc_eq>
+=item B<align>
+
+align field values for a more readable output. Only usable with
+B<sep_multiline>.
+
+=item B<space_eq>
places spaces round the B<=> character which follows the field
name.
=back
+=head2 TEXT OPTIONS
+
+As well as customising the name output format, it is also possible to
+customise the actual fields printed using the B<certopt> options when
+the B<text> option is present. The default behaviour is to print all fields.
+
+=over 4
+
+=item B<compatible>
+
+use the old format. This is equivalent to specifying no output options at all.
+
+=item B<no_header>
+
+don't print header information: that is the lines saying "Certificate" and "Data".
+
+=item B<no_version>
+
+don't print out the version number.
+
+=item B<no_serial>
+
+don't print out the serial number.
+
+=item B<no_signame>
+
+don't print out the signature algorithm used.
+
+=item B<no_validity>
+
+don't print the validity, that is the B<notBefore> and B<notAfter> fields.
+
+=item B<no_subject>
+
+don't print out the subject name.
+
+=item B<no_issuer>
+
+don't print out the issuer name.
+
+=item B<no_pubkey>
+
+don't print out the public key.
+
+=item B<no_sigdump>
+
+don't give a hexadecimal dump of the certificate signature.
+
+=item B<no_aux>
+
+don't print out certificate trust information.
+
+=item B<no_extensions>
+
+don't print out any X509V3 extensions.
+
+=item B<ext_default>
+
+retain default extension behaviour: attempt to print out unsupported certificate extensions.
+
+=item B<ext_error>
+
+print an error message for unsupported certificate extensions.
+
+=item B<ext_parse>
+
+ASN1 parse unsupported extensions.
+
+=item B<ext_dump>
+
+hex dump unsupported extensions.
+
+=item B<ca_default>
+
+the value used by the B<ca> utility, equivalent to B<no_issuer>, B<no_pubkey>, B<no_header>,
+B<no_version>, B<no_sigdump> and B<no_signame>.
+
+=back
+
=head1 EXAMPLES
Note: in these examples the '\' means the example should be all on one
Display the certificate subject name in oneline form on a terminal
supporting UTF8:
- openssl x509 -in cert.pem -noout -subject -nameopt oneline -nameopt -escmsb
+ openssl x509 -in cert.pem -noout -subject -nameopt oneline,-esc_msb
Display the certificate MD5 fingerprint:
Set a certificate to be trusted for SSL client use and change set its alias to
"Steve's Class 1 CA"
- openssl x509 -in cert.pem -addtrust sslclient \
- -alias "Steve's Class 1 CA" -out trust.pem
+ openssl x509 -in cert.pem -addtrust clientAuth \
+ -setalias "Steve's Class 1 CA" -out trust.pem
=head1 NOTES
The PEM format uses the header and footer lines:
- -----BEGIN CERTIFICATE----
- -----END CERTIFICATE----
+ -----BEGIN CERTIFICATE-----
+ -----END CERTIFICATE-----
it will also handle files containing:
- -----BEGIN X509 CERTIFICATE----
- -----END X509 CERTIFICATE----
+ -----BEGIN X509 CERTIFICATE-----
+ -----END X509 CERTIFICATE-----
Trusted certificates have the lines
- -----BEGIN TRUSTED CERTIFICATE----
- -----END TRUSTED CERTIFICATE----
+ -----BEGIN TRUSTED CERTIFICATE-----
+ -----END TRUSTED CERTIFICATE-----
The conversion to UTF8 format used with the name options assumes that
T61Strings use the ISO8859-1 character set. This is wrong but Netscape
=head1 SEE ALSO
L<req(1)|req(1)>, L<ca(1)|ca(1)>, L<genrsa(1)|genrsa(1)>,
-L<gendsa(1)|gendsa(1)>, L<verify(1)|verify(1)>
+L<gendsa(1)|gendsa(1)>, L<verify(1)|verify(1)>,
+L<x509v3_config(5)|x509v3_config(5)>
+
+=head1 HISTORY
+
+Before OpenSSL 0.9.8, the default digest for RSA keys was MD5.
+
+The hash algorithm used in the B<-subject_hash> and B<-issuer_hash> options
+before OpenSSL 1.0.0 was based on the deprecated MD5 algorithm and the encoding
+of the distinguished name. In OpenSSL 1.0.0 and later it is based on a
+canonical version of the DN using SHA1. This means that any directories using
+the old form must have their links rebuilt using B<c_rehash> or similar.
=cut
projects / openssl.git / blobdiff