=head1 NAME
-pkcs7 - PKCS#7 utility
+verify - Utility to verify certificates.
=head1 SYNOPSIS
B<openssl> B<verify>
-[B<-CApath directory>]
[B<-CAfile file>]
+[B<-CApath directory>]
+[B<-attime timestamp>]
+[B<-check_ss_sig>]
+[B<-crl_check>]
+[B<-crl_check_all>]
+[B<-explicit_policy>]
+[B<-extended_crl>]
+[B<-help>]
+[B<-ignore_critical>]
+[B<-inhibit_any>]
+[B<-inhibit_map>]
+[B<-issuer_checks>]
+[B<-partial_chain>]
+[B<-policy arg>]
+[B<-policy_check>]
+[B<-policy_print>]
[B<-purpose purpose>]
+[B<-suiteB_128>]
+[B<-suiteB_128_only>]
+[B<-suiteB_192>]
+[B<-trusted_first>]
[B<-untrusted file>]
-[B<-help>]
+[B<-use_deltas>]
[B<-verbose>]
+[B<-verify_depth num>]
+[B<-verify_email email>]
+[B<-verify_hostname hostname>]
+[B<-verify_ip ip>]
+[B<-verify_name name>]
+[B<-x509_strict>]
[B<->]
[certificates]
=over 4
+=item B<-CAfile file>
+
+A file of trusted certificates. The file should contain multiple certificates
+in PEM format concatenated together.
+
=item B<-CApath directory>
A directory of trusted certificates. The certificates should have names
of the B<x509> utility). Under Unix the B<c_rehash> script will automatically
create symbolic links to a directory of certificates.
-=item B<-CAfile file>
+=item B<-attime timestamp>
-A file of trusted certificates. The file should contain multiple certificates
-in PEM format concatenated together.
+Perform validation checks using time specified by B<timestamp> and not
+current system time. B<timestamp> is the number of seconds since
+01.01.1970 (UNIX time).
-=item B<-untrusted file>
+=item B<-check_ss_sig>
-A file of untrusted certificates. The file should contain multiple certificates
+Verify the signature on the self-signed root CA. This is disabled by default
+because it doesn't add any security.
-=item B<-purpose purpose>
+=item B<-crl_check>
+
+Checks end entity certificate validity by attempting to look up a valid CRL.
+If a valid CRL cannot be found an error occurs.
+
+=item B<-crl_check_all>
+
+Checks the validity of B<all> certificates in the chain by attempting
+to look up valid CRLs.
+
+=item B<-explicit_policy>
+
+Set policy variable require-explicit-policy (see RFC5280).
-the intended use for the certificate. Without this option no chain verification
-will be done. Currently accepted uses are B<sslclient>, B<sslserver>,
-B<nssslserver>, B<smimesign>, B<smimeencrypt>. See the B<VERIFY OPERATION>
-section for more information.
+=item B<-extended_crl>
+
+Enable extended CRL features such as indirect CRLs and alternate CRL
+signing keys.
=item B<-help>
-prints out a usage message.
+Print out a usage message.
+
+=item B<-ignore_critical>
+
+Normally if an unhandled critical extension is present which is not
+supported by OpenSSL the certificate is rejected (as required by RFC5280).
+If this option is set critical extensions are ignored.
+
+=item B<-inhibit_any>
+
+Set policy variable inhibit-any-policy (see RFC5280).
+
+=item B<-inhibit_map>
+
+Set policy variable inhibit-policy-mapping (see RFC5280).
+
+=item B<-issuer_checks>
+
+Print out diagnostics relating to searches for the issuer certificate of the
+current certificate. This shows why each candidate issuer certificate was
+rejected. The presence of rejection messages does not itself imply that
+anything is wrong; during the normal verification process, several
+rejections may take place.
+
+=item B<-partial_chain>
+
+Allow partial certificate chain if at least one certificate is in trusted store.
+
+=item B<-policy arg>
+
+Enable policy processing and add B<arg> to the user-initial-policy-set (see
+RFC5280). The policy B<arg> can be an object name an OID in numeric form.
+This argument can appear more than once.
+
+=item B<-policy_check>
+
+Enables certificate policy processing.
+
+=item B<-policy_print>
+
+Print out diagnostics related to policy processing.
+
+=item B<-purpose purpose>
+
+The intended use for the certificate. If this option is not specified,
+B<verify> will not consider certificate purpose during chain verification.
+Currently accepted uses are B<sslclient>, B<sslserver>, B<nssslserver>,
+B<smimesign>, B<smimeencrypt>. See the B<VERIFY OPERATION> section for more
+information.
+
+=item B<-suiteB_128_only>, B<-suiteB_128>, B<-suiteB_192>
+
+enable the Suite B mode operation at 128 bit Level of Security, 128 bit or
+192 bit, or only 192 bit Level of Security respectively.
+See RFC6460 for details. In particular the supported signature algorithms are
+reduced to support only ECDSA and SHA256 or SHA384 and only the elliptic curves
+P-256 and P-384.
+
+=item B<-trusted_first>
+
+Use certificates in CA file or CA directory before certificates in untrusted
+file when building the trust chain to verify certificates.
+This is mainly useful in environments with Bridge CA or Cross-Certified CAs.
+
+=item B<-untrusted file>
+
+A file of untrusted certificates. The file should contain multiple certificates
+in PEM format concatenated together.
+
+=item B<-use_deltas>
+
+Enable support for delta CRLs.
=item B<-verbose>
-print extra information about the operations being performed.
+Print extra information about the operations being performed.
+
+=item B<-verify_depth num>
+
+Limit the maximum depth of the certificate chain to B<num> certificates.
+
+=item B<-verify_email email>
+
+Verify if the B<email> matches the email address in Subject Alternative Name or
+the email the subject Distinguished Name.
+
+=item B<-verify_hostname hostname>
+
+Verify if the B<hostname> matches DNS name in Subject Alternative Name or
+Common Name in the subject certificate.
+
+=item B<-verify_ip ip>
+
+Verify if the B<ip> matches the IP address in Subject Alternative Name of
+the subject certificate.
+
+=item B<-verify_name name>
+
+Use default verification options like trust model and required certificate
+policies identified by B<name>.
+Supported usages include: default, pkcs7, smime_sign, ssl_client, ssl_server.
+
+=item B<-x509_strict>
+
+For strict X.509 compliance, disable non-compliant workarounds for broken
+certificates.
=item B<->
-marks the last option. All arguments following this are assumed to be
+Indicates the last option. All arguments following this are assumed to be
certificate files. This is useful if the first certificate filename begins
with a B<->.
=item B<certificates>
-one or more certificates to verify. If no certificate filenames are included
-then an attempt is made to read a certificate from standard input. They should
-all be in PEM format.
-
+One or more certificates to verify. If no certificates are given, B<verify>
+will attempt to read a certificate from standard input. Certificates must be
+in PEM format.
=back
Firstly a certificate chain is built up starting from the supplied certificate
and ending in the root CA. It is an error if the whole chain cannot be built
-up. The chain is built up by looking up a certificate whose subject name
-matches the issuer name of the current certificate. If a certificate is found
-whose subject and issuer names are identical it is assumed to be the root CA.
+up. The chain is built up by looking up the issuers certificate of the current
+certificate. If a certificate is found which is its own issuer it is assumed
+to be the root CA.
+
+The process of 'looking up the issuers certificate' itself involves a number
+of steps. In versions of OpenSSL before 0.9.5a the first certificate whose
+subject name matched the issuer of the current certificate was assumed to be
+the issuers certificate. In OpenSSL 0.9.6 and later all certificates
+whose subject name matches the issuer name of the current certificate are
+subject to further tests. The relevant authority key identifier components
+of the current certificate (if present) must match the subject key identifier
+(if present) and issuer and serial number of the candidate issuer, in addition
+the keyUsage extension of the candidate issuer (if present) must permit
+certificate signing.
+
The lookup first looks in the list of untrusted certificates and if no match
is found the remaining lookups are from the trusted certificates. The root CA
is always looked up in the trusted certificate list: if the certificate to
=item B<2 X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT: unable to get issuer certificate>
-the issuer certificate could not be found: this occurs if the issuer certificate
-of an untrusted certificate cannot be found.
+the issuer certificate of a looked up certificate could not be found. This
+normally means the list of trusted certificates is not complete.
-=item B<3 X509_V_ERR_UNABLE_TO_GET_CRL unable to get certificate CRL>
+=item B<3 X509_V_ERR_UNABLE_TO_GET_CRL: unable to get certificate CRL>
-the CRL of a certificate could not be found. Unused.
+the CRL of a certificate could not be found.
=item B<4 X509_V_ERR_UNABLE_TO_DECRYPT_CERT_SIGNATURE: unable to decrypt certificate's signature>
=item B<8 X509_V_ERR_CRL_SIGNATURE_FAILURE: CRL signature failure>
-the signature of the certificate is invalid. Unused.
+the signature of the certificate is invalid.
=item B<9 X509_V_ERR_CERT_NOT_YET_VALID: certificate is not yet valid>
the certificate is not yet valid: the notBefore date is after the current time.
-=item B<10 X509_V_ERR_CRL_NOT_YET_VALID: CRL is not yet valid>
+=item B<10 X509_V_ERR_CERT_HAS_EXPIRED: certificate has expired>
-the CRL is not yet valid. Unused.
+the certificate has expired: that is the notAfter date is before the current time.
-=item B<11 X509_V_ERR_CERT_HAS_EXPIRED: Certificate has expired>
+=item B<11 X509_V_ERR_CRL_NOT_YET_VALID: CRL is not yet valid>
-the certificate has expired: that is the notAfter date is before the current time.
+the CRL is not yet valid.
=item B<12 X509_V_ERR_CRL_HAS_EXPIRED: CRL has expired>
-the CRL has expired. Unused.
+the CRL has expired.
=item B<13 X509_V_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD: format error in certificate's notBefore field>
=item B<15 X509_V_ERR_ERROR_IN_CRL_LAST_UPDATE_FIELD: format error in CRL's lastUpdate field>
-the CRL lastUpdate field contains an invalid time. Unused.
+the CRL lastUpdate field contains an invalid time.
=item B<16 X509_V_ERR_ERROR_IN_CRL_NEXT_UPDATE_FIELD: format error in CRL's nextUpdate field>
-the CRL nextUpdate field contains an invalid time. Unused.
+the CRL nextUpdate field contains an invalid time.
=item B<17 X509_V_ERR_OUT_OF_MEM: out of memory>
=item B<20 X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY: unable to get local issuer certificate>
-the issuer certificate of a locally looked up certificate could not be found. This normally means
-the list of trusted certificates is not complete.
+the issuer certificate could not be found: this occurs if the issuer
+certificate of an untrusted certificate cannot be found.
=item B<21 X509_V_ERR_UNABLE_TO_VERIFY_LEAF_SIGNATURE: unable to verify the first certificate>
=item B<23 X509_V_ERR_CERT_REVOKED: certificate revoked>
-the certificate has been revoked. Unused.
+the certificate has been revoked.
=item B<24 X509_V_ERR_INVALID_CA: invalid CA certificate>
the root CA is marked to reject the specified purpose.
+=item B<29 X509_V_ERR_SUBJECT_ISSUER_MISMATCH: subject issuer mismatch>
+
+the current candidate issuer certificate was rejected because its subject name
+did not match the issuer name of the current certificate. Only displayed when
+the B<-issuer_checks> option is set.
+
+=item B<30 X509_V_ERR_AKID_SKID_MISMATCH: authority and subject key identifier mismatch>
+
+the current candidate issuer certificate was rejected because its subject key
+identifier was present and did not match the authority key identifier current
+certificate. Only displayed when the B<-issuer_checks> option is set.
+
+=item B<31 X509_V_ERR_AKID_ISSUER_SERIAL_MISMATCH: authority and issuer serial number mismatch>
+
+the current candidate issuer certificate was rejected because its issuer name
+and serial number was present and did not match the authority key identifier
+of the current certificate. Only displayed when the B<-issuer_checks> option is set.
+
+=item B<32 X509_V_ERR_KEYUSAGE_NO_CERTSIGN:key usage does not include certificate signing>
+
+the current candidate issuer certificate was rejected because its keyUsage extension
+does not permit certificate signing.
+
=item B<50 X509_V_ERR_APPLICATION_VERIFICATION: application verification failure>
an application specific error. Unused.
=back
+=head1 BUGS
+
+Although the issuer checks are a considerable improvement over the old technique they still
+suffer from limitations in the underlying X509_LOOKUP API. One consequence of this is that
+trusted certificates with matching subject name must either appear in a file (as specified by the
+B<-CAfile> option) or a directory (as specified by B<-CApath>. If they occur in both then only
+the certificates in the file will be recognised.
+
+Previous versions of OpenSSL assume certificates with matching subject name are identical and
+mishandled them.
+
+Previous versions of this documentation swapped the meaning of the
+B<X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT> and
+B<20 X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY> error codes.
+
=head1 SEE ALSO
-x509(1)
+L<x509(1)|x509(1)>
=cut
projects / openssl.git / blobdiff