-/* crypto/engine/hw_ibmca.c */\r
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL\r
- * project 2000.\r
- */\r
-/* ====================================================================\r
- * Copyright (c) 1999 The OpenSSL Project. All rights reserved.\r
- *\r
- * Redistribution and use in source and binary forms, with or without\r
- * modification, are permitted provided that the following conditions\r
- * are met:\r
- *\r
- * 1. Redistributions of source code must retain the above copyright\r
- * notice, this list of conditions and the following disclaimer.\r
- *\r
- * 2. Redistributions in binary form must reproduce the above copyright\r
- * notice, this list of conditions and the following disclaimer in\r
- * the documentation and/or other materials provided with the\r
- * distribution.\r
- *\r
- * 3. All advertising materials mentioning features or use of this\r
- * software must display the following acknowledgment:\r
- * "This product includes software developed by the OpenSSL Project\r
- * for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"\r
- *\r
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to\r
- * endorse or promote products derived from this software without\r
- * prior written permission. For written permission, please contact\r
- * licensing@OpenSSL.org.\r
- *\r
- * 5. Products derived from this software may not be called "OpenSSL"\r
- * nor may "OpenSSL" appear in their names without prior written\r
- * permission of the OpenSSL Project.\r
- *\r
- * 6. Redistributions of any form whatsoever must retain the following\r
- * acknowledgment:\r
- * "This product includes software developed by the OpenSSL Project\r
- * for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"\r
- *\r
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY\r
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE\r
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR\r
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR\r
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,\r
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT\r
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;\r
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)\r
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,\r
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)\r
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED\r
- * OF THE POSSIBILITY OF SUCH DAMAGE.\r
- * ====================================================================\r
- *\r
- * This product includes cryptographic software written by Eric Young\r
- * (eay@cryptsoft.com). This product includes software written by Tim\r
- * Hudson (tjh@cryptsoft.com).\r
- *\r
- */\r
-\r
-/* (C) COPYRIGHT International Business Machines Corp. 2001 */\r
-\r
-#include <stdio.h>\r
-#include <openssl/crypto.h>\r
-#include <openssl/dso.h>\r
-#include <openssl/engine.h>\r
-\r
-#ifndef OPENSSL_NO_HW\r
-#ifndef OPENSSL_NO_HW_IBMCA\r
-\r
-#ifdef FLAT_INC\r
-#include "ica_openssl_api.h"\r
-#else\r
-#include "vendor_defns/ica_openssl_api.h"\r
-#endif\r
-\r
-#define IBMCA_LIB_NAME "ibmca engine"\r
-#include "hw_ibmca_err.c"\r
-\r
-static int ibmca_destroy(ENGINE *e);\r
-static int ibmca_init(ENGINE *e);\r
-static int ibmca_finish(ENGINE *e);\r
-static int ibmca_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)());\r
-\r
-static const char *IBMCA_F1 = "icaOpenAdapter";\r
-static const char *IBMCA_F2 = "icaCloseAdapter";\r
-static const char *IBMCA_F3 = "icaRsaModExpo";\r
-static const char *IBMCA_F4 = "icaRandomNumberGenerate";\r
-static const char *IBMCA_F5 = "icaRsaCrt";\r
-\r
-ICA_ADAPTER_HANDLE handle=0;\r
-\r
-/* BIGNUM stuff */\r
-static int ibmca_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,\r
- const BIGNUM *m, BN_CTX *ctx);\r
-\r
-static int ibmca_mod_exp_crt(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,\r
- const BIGNUM *q, const BIGNUM *dmp1, const BIGNUM *dmq1,\r
- const BIGNUM *iqmp, BN_CTX *ctx);\r
-\r
-#ifndef OPENSSL_NO_RSA \r
-/* RSA stuff */\r
-static int ibmca_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa);\r
-#endif\r
-\r
-/* This function is aliased to mod_exp (with the mont stuff dropped). */\r
-static int ibmca_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,\r
- const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);\r
-\r
-#ifndef OPENSSL_NO_DSA \r
-/* DSA stuff */\r
-static int ibmca_dsa_mod_exp(DSA *dsa, BIGNUM *rr, BIGNUM *a1,\r
- BIGNUM *p1, BIGNUM *a2, BIGNUM *p2, BIGNUM *m,\r
- BN_CTX *ctx, BN_MONT_CTX *in_mont);\r
-static int ibmca_mod_exp_dsa(DSA *dsa, BIGNUM *r, BIGNUM *a,\r
- const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,\r
- BN_MONT_CTX *m_ctx);\r
-#endif\r
-\r
-#ifndef OPENSSL_NO_DH \r
-/* DH stuff */\r
-/* This function is alised to mod_exp (with the DH and mont dropped). */\r
-static int ibmca_mod_exp_dh(const DH *dh, BIGNUM *r, \r
- const BIGNUM *a, const BIGNUM *p,\r
- const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);\r
-#endif\r
-\r
-/* RAND stuff */\r
-static int ibmca_rand_bytes(unsigned char *buf, int num);\r
-static int ibmca_rand_status(void);\r
-\r
-\r
-/* WJH - check for more commands, like in nuron */\r
-\r
-/* The definitions for control commands specific to this engine */\r
-#define IBMCA_CMD_SO_PATH ENGINE_CMD_BASE\r
-static const ENGINE_CMD_DEFN ibmca_cmd_defns[] = {\r
- {IBMCA_CMD_SO_PATH,\r
- "SO_PATH",\r
- "Specifies the path to the 'atasi' shared library",\r
- ENGINE_CMD_FLAG_STRING},\r
- {0, NULL, NULL, 0}\r
- };\r
-\r
-#ifndef OPENSSL_NO_RSA \r
-/* Our internal RSA_METHOD that we provide pointers to */\r
-static RSA_METHOD ibmca_rsa =\r
- {\r
- "Ibmca RSA method",\r
- NULL,\r
- NULL,\r
- NULL,\r
- NULL,\r
- ibmca_rsa_mod_exp,\r
- ibmca_mod_exp_mont,\r
- NULL,\r
- NULL,\r
- 0,\r
- NULL,\r
- NULL,\r
- NULL\r
- };\r
-#endif\r
-\r
-#ifndef OPENSSL_NO_DSA\r
-/* Our internal DSA_METHOD that we provide pointers to */\r
-static DSA_METHOD ibmca_dsa =\r
- {\r
- "Ibmca DSA method",\r
- NULL, /* dsa_do_sign */\r
- NULL, /* dsa_sign_setup */\r
- NULL, /* dsa_do_verify */\r
- ibmca_dsa_mod_exp, /* dsa_mod_exp */\r
- ibmca_mod_exp_dsa, /* bn_mod_exp */\r
- NULL, /* init */\r
- NULL, /* finish */\r
- 0, /* flags */\r
- NULL /* app_data */\r
- };\r
-#endif\r
-\r
-#ifndef OPENSSL_NO_DH\r
-/* Our internal DH_METHOD that we provide pointers to */\r
-static DH_METHOD ibmca_dh =\r
- {\r
- "Ibmca DH method",\r
- NULL,\r
- NULL,\r
- ibmca_mod_exp_dh,\r
- NULL,\r
- NULL,\r
- 0,\r
- NULL\r
- };\r
-#endif\r
-\r
-static RAND_METHOD ibmca_rand =\r
- {\r
- /* "IBMCA RAND method", */\r
- NULL,\r
- ibmca_rand_bytes,\r
- NULL,\r
- NULL,\r
- ibmca_rand_bytes,\r
- ibmca_rand_status,\r
- };\r
-\r
-/* Constants used when creating the ENGINE */\r
-static const char *engine_ibmca_id = "ibmca";\r
-static const char *engine_ibmca_name = "Ibmca hardware engine support";\r
-\r
-/* This internal function is used by ENGINE_ibmca() and possibly by the\r
- * "dynamic" ENGINE support too */\r
-static int bind_helper(ENGINE *e)\r
- {\r
-#ifndef OPENSSL_NO_RSA\r
- const RSA_METHOD *meth1;\r
-#endif\r
-#ifndef OPENSSL_NO_DSA\r
- const DSA_METHOD *meth2;\r
-#endif\r
-#ifndef OPENSSL_NO_DH\r
- const DH_METHOD *meth3;\r
-#endif\r
- if(!ENGINE_set_id(e, engine_ibmca_id) ||\r
- !ENGINE_set_name(e, engine_ibmca_name) ||\r
-#ifndef OPENSSL_NO_RSA\r
- !ENGINE_set_RSA(e, &ibmca_rsa) ||\r
-#endif\r
-#ifndef OPENSSL_NO_DSA\r
- !ENGINE_set_DSA(e, &ibmca_dsa) ||\r
-#endif\r
-#ifndef OPENSSL_NO_DH\r
- !ENGINE_set_DH(e, &ibmca_dh) ||\r
-#endif\r
- !ENGINE_set_RAND(e, &ibmca_rand) ||\r
- !ENGINE_set_destroy_function(e, ibmca_destroy) ||\r
- !ENGINE_set_init_function(e, ibmca_init) ||\r
- !ENGINE_set_finish_function(e, ibmca_finish) ||\r
- !ENGINE_set_ctrl_function(e, ibmca_ctrl) ||\r
- !ENGINE_set_cmd_defns(e, ibmca_cmd_defns))\r
- return 0;\r
-\r
-#ifndef OPENSSL_NO_RSA\r
- /* We know that the "PKCS1_SSLeay()" functions hook properly\r
- * to the ibmca-specific mod_exp and mod_exp_crt so we use\r
- * those functions. NB: We don't use ENGINE_openssl() or\r
- * anything "more generic" because something like the RSAref\r
- * code may not hook properly, and if you own one of these\r
- * cards then you have the right to do RSA operations on it\r
- * anyway! */ \r
- meth1 = RSA_PKCS1_SSLeay();\r
- ibmca_rsa.rsa_pub_enc = meth1->rsa_pub_enc;\r
- ibmca_rsa.rsa_pub_dec = meth1->rsa_pub_dec;\r
- ibmca_rsa.rsa_priv_enc = meth1->rsa_priv_enc;\r
- ibmca_rsa.rsa_priv_dec = meth1->rsa_priv_dec;\r
-#endif\r
-\r
-#ifndef OPENSSL_NO_DSA\r
- /* Use the DSA_OpenSSL() method and just hook the mod_exp-ish\r
- * bits. */\r
- meth2 = DSA_OpenSSL();\r
- ibmca_dsa.dsa_do_sign = meth2->dsa_do_sign;\r
- ibmca_dsa.dsa_sign_setup = meth2->dsa_sign_setup;\r
- ibmca_dsa.dsa_do_verify = meth2->dsa_do_verify;\r
-#endif\r
-\r
-#ifndef OPENSSL_NO_DH\r
- /* Much the same for Diffie-Hellman */\r
- meth3 = DH_OpenSSL();\r
- ibmca_dh.generate_key = meth3->generate_key;\r
- ibmca_dh.compute_key = meth3->compute_key;\r
-#endif\r
-\r
- /* Ensure the ibmca error handling is set up */\r
- ERR_load_IBMCA_strings(); \r
- return 1;\r
- }\r
-\r
-static ENGINE *engine_ibmca(void)\r
- {\r
- ENGINE *ret = ENGINE_new();\r
- if(!ret)\r
- return NULL;\r
- if(!bind_helper(ret))\r
- {\r
- ENGINE_free(ret);\r
- return NULL;\r
- }\r
- return ret;\r
- }\r
-\r
-void ENGINE_load_ibmca(void)\r
- {\r
- /* Copied from eng_[openssl|dyn].c */\r
- ENGINE *toadd = engine_ibmca();\r
- if(!toadd) return;\r
- ENGINE_add(toadd);\r
- ENGINE_free(toadd);\r
- ERR_clear_error();\r
- }\r
-\r
-/* Destructor (complements the "ENGINE_ibmca()" constructor) */\r
-static int ibmca_destroy(ENGINE *e)\r
- {\r
- /* Unload the ibmca error strings so any error state including our\r
- * functs or reasons won't lead to a segfault (they simply get displayed\r
- * without corresponding string data because none will be found). */\r
- ERR_unload_IBMCA_strings(); \r
- return 1;\r
- }\r
-\r
-\r
-/* This is a process-global DSO handle used for loading and unloading\r
- * the Ibmca library. NB: This is only set (or unset) during an\r
- * init() or finish() call (reference counts permitting) and they're\r
- * operating with global locks, so this should be thread-safe\r
- * implicitly. */\r
-\r
-static DSO *ibmca_dso = NULL;\r
-\r
-/* These are the function pointers that are (un)set when the library has\r
- * successfully (un)loaded. */\r
-\r
-static unsigned int (ICA_CALL *p_icaOpenAdapter)();\r
-static unsigned int (ICA_CALL *p_icaCloseAdapter)();\r
-static unsigned int (ICA_CALL *p_icaRsaModExpo)();\r
-static unsigned int (ICA_CALL *p_icaRandomNumberGenerate)();\r
-static unsigned int (ICA_CALL *p_icaRsaCrt)();\r
-\r
-/* utility function to obtain a context */\r
-static int get_context(ICA_ADAPTER_HANDLE *p_handle)\r
- {\r
- unsigned int status=0;\r
-\r
- status = p_icaOpenAdapter(0, p_handle);\r
- if(status != 0)\r
- return 0;\r
- return 1;\r
- }\r
-\r
-/* similarly to release one. */\r
-static void release_context(ICA_ADAPTER_HANDLE handle)\r
- {\r
- p_icaCloseAdapter(handle);\r
- }\r
-\r
-/* (de)initialisation functions. */\r
-static int ibmca_init(ENGINE *e)\r
- {\r
-\r
- void (*p1)();\r
- void (*p2)();\r
- void (*p3)();\r
- void (*p4)();\r
- void (*p5)();\r
-\r
- if(ibmca_dso != NULL)\r
- {\r
- IBMCAerr(IBMCA_F_IBMCA_INIT,IBMCA_R_ALREADY_LOADED);\r
- goto err;\r
- }\r
- /* Attempt to load libatasi.so/atasi.dll/whatever. Needs to be\r
- * changed unfortunately because the Ibmca drivers don't have\r
- * standard library names that can be platform-translated well. */\r
- /* TODO: Work out how to actually map to the names the Ibmca\r
- * drivers really use - for now a symbollic link needs to be\r
- * created on the host system from libatasi.so to atasi.so on\r
- * unix variants. */\r
-\r
- /* WJH XXX check name translation */\r
-\r
- ibmca_dso = DSO_load(NULL, IBMCA_LIBNAME, NULL,\r
- /* DSO_FLAG_NAME_TRANSLATION */ 0);\r
- if(ibmca_dso == NULL)\r
- {\r
- IBMCAerr(IBMCA_F_IBMCA_INIT,IBMCA_R_DSO_FAILURE);\r
- goto err;\r
- }\r
-\r
- if(!(p1 = DSO_bind_func(\r
- ibmca_dso, IBMCA_F1)) ||\r
- !(p2 = DSO_bind_func(\r
- ibmca_dso, IBMCA_F2)) ||\r
- !(p3 = DSO_bind_func(\r
- ibmca_dso, IBMCA_F3)) ||\r
- !(p4 = DSO_bind_func(\r
- ibmca_dso, IBMCA_F4)) ||\r
- !(p5 = DSO_bind_func(\r
- ibmca_dso, IBMCA_F5)))\r
- {\r
- IBMCAerr(IBMCA_F_IBMCA_INIT,IBMCA_R_DSO_FAILURE);\r
- goto err;\r
- }\r
-\r
- /* Copy the pointers */\r
-\r
- p_icaOpenAdapter = (unsigned int (ICA_CALL *)())p1;\r
- p_icaCloseAdapter = (unsigned int (ICA_CALL *)())p2;\r
- p_icaRsaModExpo = (unsigned int (ICA_CALL *)())p3;\r
- p_icaRandomNumberGenerate = (unsigned int (ICA_CALL *)())p4;\r
- p_icaRsaCrt = (unsigned int (ICA_CALL *)())p5;\r
-\r
- if(!get_context(&handle))\r
- {\r
- IBMCAerr(IBMCA_F_IBMCA_INIT,IBMCA_R_UNIT_FAILURE);\r
- goto err;\r
- }\r
-\r
- return 1;\r
- err:\r
- if(ibmca_dso)\r
- DSO_free(ibmca_dso);\r
-\r
- p_icaOpenAdapter = NULL;\r
- p_icaCloseAdapter = NULL;\r
- p_icaRsaModExpo = NULL;\r
- p_icaRandomNumberGenerate = NULL;\r
-\r
- return 0;\r
- }\r
-\r
-static int ibmca_finish(ENGINE *e)\r
- {\r
- if(ibmca_dso == NULL)\r
- {\r
- IBMCAerr(IBMCA_F_IBMCA_FINISH,IBMCA_R_NOT_LOADED);\r
- return 0;\r
- }\r
- release_context(handle);\r
- if(!DSO_free(ibmca_dso))\r
- {\r
- IBMCAerr(IBMCA_F_IBMCA_FINISH,IBMCA_R_DSO_FAILURE);\r
- return 0;\r
- }\r
- ibmca_dso = NULL;\r
-\r
- return 1;\r
- }\r
-\r
-static int ibmca_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)())\r
- {\r
- int initialised = ((ibmca_dso == NULL) ? 0 : 1);\r
- switch(cmd)\r
- {\r
- case IBMCA_CMD_SO_PATH:\r
- if(p == NULL)\r
- {\r
- IBMCAerr(IBMCA_F_IBMCA_CTRL,ERR_R_PASSED_NULL_PARAMETER);\r
- return 0;\r
- }\r
- if(initialised)\r
- {\r
- IBMCAerr(IBMCA_F_IBMCA_CTRL,IBMCA_R_ALREADY_LOADED);\r
- return 0;\r
- }\r
- IBMCA_LIBNAME = (const char *)p;\r
- return 1;\r
- default:\r
- break;\r
- }\r
- IBMCAerr(IBMCA_F_IBMCA_CTRL,IBMCA_R_CTRL_COMMAND_NOT_IMPLEMENTED);\r
- return 0;\r
- }\r
-\r
-\r
-static int ibmca_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,\r
- const BIGNUM *m, BN_CTX *ctx)\r
- {\r
- /* I need somewhere to store temporary serialised values for\r
- * use with the Ibmca API calls. A neat cheat - I'll use\r
- * BIGNUMs from the BN_CTX but access their arrays directly as\r
- * byte arrays <grin>. This way I don't have to clean anything\r
- * up. */\r
-\r
- BIGNUM *argument=NULL;\r
- BIGNUM *result=NULL;\r
- BIGNUM *key=NULL;\r
- int to_return;\r
- int inLen, outLen, tmpLen;\r
-\r
-\r
- ICA_KEY_RSA_MODEXPO *publKey=NULL;\r
- unsigned int rc;\r
-\r
- to_return = 0; /* expect failure */\r
-\r
- if(!ibmca_dso)\r
- {\r
- IBMCAerr(IBMCA_F_IBMCA_MOD_EXP,IBMCA_R_NOT_LOADED);\r
- goto err;\r
- }\r
- /* Prepare the params */\r
- BN_CTX_start(ctx);\r
- argument = BN_CTX_get(ctx);\r
- result = BN_CTX_get(ctx);\r
- key = BN_CTX_get(ctx);\r
-\r
- if( !argument || !result || !key)\r
- {\r
- IBMCAerr(IBMCA_F_IBMCA_MOD_EXP,IBMCA_R_BN_CTX_FULL);\r
- goto err;\r
- }\r
-\r
-\r
- if(!bn_wexpand(argument, m->top) || !bn_wexpand(result, m->top) ||\r
- !bn_wexpand(key, sizeof(*publKey)/BN_BYTES))\r
-\r
- {\r
- IBMCAerr(IBMCA_F_IBMCA_MOD_EXP,IBMCA_R_BN_EXPAND_FAIL);\r
- goto err;\r
- }\r
-\r
- publKey = (ICA_KEY_RSA_MODEXPO *)key->d;\r
-\r
- if (publKey == NULL)\r
- {\r
- goto err;\r
- }\r
- memset(publKey, 0, sizeof(ICA_KEY_RSA_MODEXPO));\r
-\r
- publKey->keyType = CORRECT_ENDIANNESS(ME_KEY_TYPE);\r
- publKey->keyLength = CORRECT_ENDIANNESS(sizeof(ICA_KEY_RSA_MODEXPO));\r
- publKey->expOffset = (char *) publKey->keyRecord - (char *) publKey;\r
-\r
- /* A quirk of the card: the exponent length has to be the same\r
- as the modulus (key) length */\r
-\r
- outLen = BN_num_bytes(m);\r
-\r
-/* check for modulus length SAB*/\r
- if (outLen > 256 ) {\r
- IBMCAerr(IBMCA_F_IBMCA_MOD_EXP,IBMCA_R_MEXP_LENGTH_TO_LARGE);\r
- goto err;\r
- }\r
-/* check for modulus length SAB*/\r
-\r
-\r
- publKey->expLength = publKey->nLength = outLen;\r
-/* SAB Check for underflow condition\r
- the size of the exponent is less than the size of the parameter\r
- then we have a big problem and will underflow the keyRecord\r
- buffer. Bad stuff could happen then\r
-*/\r
-if (outLen < BN_num_bytes(p)){\r
- IBMCAerr(IBMCA_F_IBMCA_MOD_EXP,IBMCA_R_UNDERFLOW_KEYRECORD);\r
- goto err;\r
-}\r
-/* SAB End check for underflow */\r
-\r
-\r
- BN_bn2bin(p, &publKey->keyRecord[publKey->expLength -\r
- BN_num_bytes(p)]);\r
- BN_bn2bin(m, &publKey->keyRecord[publKey->expLength]);\r
-\r
-\r
-\r
- publKey->modulusBitLength = CORRECT_ENDIANNESS(publKey->nLength * 8);\r
- publKey->nOffset = CORRECT_ENDIANNESS(publKey->expOffset + \r
- publKey->expLength);\r
-\r
- publKey->expOffset = CORRECT_ENDIANNESS((char *) publKey->keyRecord - \r
- (char *) publKey);\r
-\r
- tmpLen = outLen;\r
- publKey->expLength = publKey->nLength = CORRECT_ENDIANNESS(tmpLen);\r
-\r
- /* Prepare the argument */\r
-\r
- memset(argument->d, 0, outLen);\r
- BN_bn2bin(a, (unsigned char *)argument->d + outLen -\r
- BN_num_bytes(a));\r
-\r
- inLen = outLen;\r
-\r
- /* Perform the operation */\r
-\r
- if( (rc = p_icaRsaModExpo(handle, inLen,(unsigned char *)argument->d,\r
- publKey, &outLen, (unsigned char *)result->d))\r
- !=0 )\r
-\r
- {\r
- printf("rc = %d\n", rc);\r
- IBMCAerr(IBMCA_F_IBMCA_MOD_EXP,IBMCA_R_REQUEST_FAILED);\r
- goto err;\r
- }\r
-\r
-\r
- /* Convert the response */\r
- BN_bin2bn((unsigned char *)result->d, outLen, r);\r
- to_return = 1;\r
- err:\r
- BN_CTX_end(ctx);\r
- return to_return;\r
- }\r
-\r
-#ifndef OPENSSL_NO_RSA \r
-static int ibmca_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa)\r
- {\r
- BN_CTX *ctx;\r
- int to_return = 0;\r
-\r
- if((ctx = BN_CTX_new()) == NULL)\r
- goto err;\r
- if(!rsa->p || !rsa->q || !rsa->dmp1 || !rsa->dmq1 || !rsa->iqmp)\r
- {\r
- if(!rsa->d || !rsa->n)\r
- {\r
- IBMCAerr(IBMCA_F_IBMCA_RSA_MOD_EXP,\r
- IBMCA_R_MISSING_KEY_COMPONENTS);\r
- goto err;\r
- }\r
- to_return = ibmca_mod_exp(r0, I, rsa->d, rsa->n, ctx);\r
- }\r
- else\r
- {\r
- to_return = ibmca_mod_exp_crt(r0, I, rsa->p, rsa->q, rsa->dmp1,\r
- rsa->dmq1, rsa->iqmp, ctx);\r
- }\r
- err:\r
- if(ctx)\r
- BN_CTX_free(ctx);\r
- return to_return;\r
- }\r
-#endif\r
-\r
-/* Ein kleines chinesisches "Restessen" */\r
-static int ibmca_mod_exp_crt(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,\r
- const BIGNUM *q, const BIGNUM *dmp1,\r
- const BIGNUM *dmq1, const BIGNUM *iqmp, BN_CTX *ctx)\r
- {\r
-\r
- BIGNUM *argument = NULL;\r
- BIGNUM *result = NULL;\r
- BIGNUM *key = NULL;\r
-\r
- int to_return = 0; /* expect failure */\r
-\r
- char *pkey=NULL;\r
- ICA_KEY_RSA_CRT *privKey=NULL;\r
- int inLen, outLen;\r
-\r
- int rc;\r
- unsigned int offset, pSize, qSize;\r
-/* SAB New variables */\r
- unsigned int keyRecordSize;\r
- unsigned int pbytes = BN_num_bytes(p);\r
- unsigned int qbytes = BN_num_bytes(q);\r
- unsigned int dmp1bytes = BN_num_bytes(dmp1);\r
- unsigned int dmq1bytes = BN_num_bytes(dmq1);\r
- unsigned int iqmpbytes = BN_num_bytes(iqmp);\r
-\r
- /* Prepare the params */\r
-\r
- BN_CTX_start(ctx);\r
- argument = BN_CTX_get(ctx);\r
- result = BN_CTX_get(ctx);\r
- key = BN_CTX_get(ctx);\r
-\r
- if(!argument || !result || !key)\r
- {\r
- IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT,IBMCA_R_BN_CTX_FULL);\r
- goto err;\r
- }\r
-\r
- if(!bn_wexpand(argument, p->top + q->top) ||\r
- !bn_wexpand(result, p->top + q->top) ||\r
- !bn_wexpand(key, sizeof(*privKey)/BN_BYTES ))\r
- {\r
- IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT,IBMCA_R_BN_EXPAND_FAIL);\r
- goto err;\r
- }\r
-\r
-\r
- privKey = (ICA_KEY_RSA_CRT *)key->d;\r
-/* SAB Add check for total size in bytes of the parms does not exceed\r
- the buffer space we have\r
- do this first\r
-*/\r
- keyRecordSize = pbytes+qbytes+dmp1bytes+dmq1bytes+iqmpbytes;\r
- if ( keyRecordSize > sizeof(privKey->keyRecord )) {\r
- IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT,IBMCA_R_OPERANDS_TO_LARGE);\r
- goto err;\r
- }\r
-\r
- if ( (qbytes + dmq1bytes) > 256 ){\r
- IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT,IBMCA_R_OPERANDS_TO_LARGE);\r
- goto err;\r
- }\r
-\r
- if ( pbytes + dmp1bytes > 256 ) {\r
- IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT,IBMCA_R_OPERANDS_TO_LARGE);\r
- goto err;\r
- }\r
-\r
-/* end SAB additions */\r
- \r
- memset(privKey, 0, sizeof(ICA_KEY_RSA_CRT));\r
- privKey->keyType = CORRECT_ENDIANNESS(CRT_KEY_TYPE);\r
- privKey->keyLength = CORRECT_ENDIANNESS(sizeof(ICA_KEY_RSA_CRT));\r
- privKey->modulusBitLength = \r
- CORRECT_ENDIANNESS(BN_num_bytes(q) * 2 * 8);\r
-\r
- /*\r
- * p,dp & qInv are 1 QWORD Larger\r
- */\r
- privKey->pLength = CORRECT_ENDIANNESS(BN_num_bytes(p)+8);\r
- privKey->qLength = CORRECT_ENDIANNESS(BN_num_bytes(q));\r
- privKey->dpLength = CORRECT_ENDIANNESS(BN_num_bytes(dmp1)+8);\r
- privKey->dqLength = CORRECT_ENDIANNESS(BN_num_bytes(dmq1));\r
- privKey->qInvLength = CORRECT_ENDIANNESS(BN_num_bytes(iqmp)+8);\r
-\r
- offset = (char *) privKey->keyRecord\r
- - (char *) privKey;\r
-\r
- qSize = BN_num_bytes(q);\r
- pSize = qSize + 8; /* 1 QWORD larger */\r
-\r
-\r
-/* SAB probably aittle redundant, but we'll verify that each of the\r
- components which make up a key record sent ot the card does not exceed\r
- the space that is allocated for it. this handles the case where even if\r
- the total length does not exceed keyrecord zied, if the operands are funny sized\r
-they could cause potential side affects on either the card or the result */\r
-\r
- if ( (pbytes > pSize) || (dmp1bytes > pSize) ||\r
- (iqmpbytes > pSize) || ( qbytes >qSize) ||\r
- (dmq1bytes > qSize) ) {\r
- IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT, IBMCA_R_OPERANDS_TO_LARGE);\r
- goto err;\r
-\r
- }\r
- \r
-\r
- privKey->dpOffset = CORRECT_ENDIANNESS(offset);\r
-\r
- offset += pSize;\r
- privKey->dqOffset = CORRECT_ENDIANNESS(offset);\r
-\r
- offset += qSize;\r
- privKey->pOffset = CORRECT_ENDIANNESS(offset);\r
-\r
- offset += pSize;\r
- privKey->qOffset = CORRECT_ENDIANNESS(offset);\r
-\r
- offset += qSize;\r
- privKey->qInvOffset = CORRECT_ENDIANNESS(offset);\r
-\r
- pkey = (char *) privKey->keyRecord;\r
-\r
-\r
-/* SAB first check that we don;t under flow the buffer */\r
- if ( pSize < pbytes ) {\r
- IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT, IBMCA_R_UNDERFLOW_CONDITION);\r
- goto err;\r
- }\r
-\r
- /* pkey += pSize - BN_num_bytes(p); WROING this should be dmp1) */\r
- pkey += pSize - BN_num_bytes(dmp1);\r
- BN_bn2bin(dmp1, pkey); \r
- pkey += BN_num_bytes(dmp1); /* move the pointer */\r
-\r
- BN_bn2bin(dmq1, pkey); /* Copy over dmq1 */\r
-\r
- pkey += qSize; /* move pointer */\r
- pkey += pSize - BN_num_bytes(p); /* set up for zero padding of next field */\r
-\r
- BN_bn2bin(p, pkey);\r
- pkey += BN_num_bytes(p); /* increment pointer by number of bytes moved */\r
-\r
- BN_bn2bin(q, pkey);\r
- pkey += qSize ; /* move the pointer */\r
- pkey += pSize - BN_num_bytes(iqmp); /* Adjust for padding */\r
- BN_bn2bin(iqmp, pkey);\r
-\r
- /* Prepare the argument and response */\r
-\r
- outLen = CORRECT_ENDIANNESS(privKey->qLength) * 2; /* Correct endianess is used \r
- because the fields were converted above */\r
-\r
- if (outLen > 256) {\r
- IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT,IBMCA_R_OUTLEN_TO_LARGE);\r
- goto err;\r
- }\r
-\r
- /* SAB check for underflow here on the argeument */\r
- if ( outLen < BN_num_bytes(a)) {\r
- IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT,IBMCA_R_UNDERFLOW_CONDITION);\r
- goto err;\r
- }\r
-\r
- BN_bn2bin(a, (unsigned char *)argument->d + outLen -\r
- BN_num_bytes(a));\r
- inLen = outLen;\r
-\r
- memset(result->d, 0, outLen);\r
-\r
- /* Perform the operation */\r
-\r
- if ( (rc = p_icaRsaCrt(handle, inLen, (unsigned char *)argument->d,\r
- privKey, &outLen, (unsigned char *)result->d)) != 0)\r
- {\r
- printf("rc = %d\n", rc);\r
- IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT,IBMCA_R_REQUEST_FAILED);\r
- goto err;\r
- }\r
-\r
- /* Convert the response */\r
-\r
- BN_bin2bn((unsigned char *)result->d, outLen, r);\r
- to_return = 1;\r
-\r
- err:\r
- BN_CTX_end(ctx);\r
- return to_return;\r
-\r
- }\r
-\r
-#ifndef OPENSSL_NO_DSA\r
-/* This code was liberated and adapted from the commented-out code in\r
- * dsa_ossl.c. Because of the unoptimised form of the Ibmca acceleration\r
- * (it doesn't have a CRT form for RSA), this function means that an\r
- * Ibmca system running with a DSA server certificate can handshake\r
- * around 5 or 6 times faster/more than an equivalent system running with\r
- * RSA. Just check out the "signs" statistics from the RSA and DSA parts\r
- * of "openssl speed -engine ibmca dsa1024 rsa1024". */\r
-static int ibmca_dsa_mod_exp(DSA *dsa, BIGNUM *rr, BIGNUM *a1,\r
- BIGNUM *p1, BIGNUM *a2, BIGNUM *p2, BIGNUM *m,\r
- BN_CTX *ctx, BN_MONT_CTX *in_mont)\r
- {\r
- BIGNUM t;\r
- int to_return = 0;\r
-\r
- BN_init(&t);\r
- /* let rr = a1 ^ p1 mod m */\r
- if (!ibmca_mod_exp(rr,a1,p1,m,ctx)) goto end;\r
- /* let t = a2 ^ p2 mod m */\r
- if (!ibmca_mod_exp(&t,a2,p2,m,ctx)) goto end;\r
- /* let rr = rr * t mod m */\r
- if (!BN_mod_mul(rr,rr,&t,m,ctx)) goto end;\r
- to_return = 1;\r
- end:\r
- BN_free(&t);\r
- return to_return;\r
- }\r
-\r
-\r
-static int ibmca_mod_exp_dsa(DSA *dsa, BIGNUM *r, BIGNUM *a,\r
- const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,\r
- BN_MONT_CTX *m_ctx)\r
- {\r
- return ibmca_mod_exp(r, a, p, m, ctx);\r
- }\r
-#endif\r
-\r
-/* This function is aliased to mod_exp (with the mont stuff dropped). */\r
-static int ibmca_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,\r
- const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)\r
- {\r
- return ibmca_mod_exp(r, a, p, m, ctx);\r
- }\r
-\r
-#ifndef OPENSSL_NO_DH \r
-/* This function is aliased to mod_exp (with the dh and mont dropped). */\r
-static int ibmca_mod_exp_dh(DH const *dh, BIGNUM *r, \r
- const BIGNUM *a, const BIGNUM *p, \r
- const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)\r
- {\r
- return ibmca_mod_exp(r, a, p, m, ctx);\r
- }\r
-#endif\r
-\r
-/* Random bytes are good */\r
-static int ibmca_rand_bytes(unsigned char *buf, int num)\r
- {\r
- int to_return = 0; /* assume failure */\r
- unsigned int ret;\r
-\r
-\r
- if(handle == 0)\r
- {\r
- IBMCAerr(IBMCA_F_IBMCA_RAND_BYTES,IBMCA_R_NOT_INITIALISED);\r
- goto err;\r
- }\r
-\r
- ret = p_icaRandomNumberGenerate(handle, num, buf);\r
- if (ret < 0)\r
- {\r
- IBMCAerr(IBMCA_F_IBMCA_RAND_BYTES,IBMCA_R_REQUEST_FAILED);\r
- goto err;\r
- }\r
- to_return = 1;\r
- err:\r
- return to_return;\r
- }\r
-\r
-static int ibmca_rand_status(void)\r
- {\r
- return 1;\r
- }\r
-\r
-/* This stuff is needed if this ENGINE is being compiled into a self-contained\r
- * shared-library. */\r
-#ifdef ENGINE_DYNAMIC_SUPPORT\r
-static int bind_fn(ENGINE *e, const char *id)\r
- {\r
- if(id && (strcmp(id, engine_ibmca_id) != 0)) /* WJH XXX */\r
- return 0;\r
- if(!bind_helper(e))\r
- return 0;\r
- return 1;\r
- }\r
-IMPLEMENT_DYNAMIC_CHECK_FN()\r
-IMPLEMENT_DYNAMIC_BIND_FN(bind_fn)\r
-#endif /* ENGINE_DYNAMIC_SUPPORT */\r
-\r
-\r
-#endif /* !OPENSSL_NO_HW_IBMCA */\r
-#endif /* !OPENSSL_NO_HW */\r
+/* crypto/engine/hw_ibmca.c */
+/*
+ * Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL project
+ * 2000.
+ */
+/* ====================================================================
+ * Copyright (c) 1999 The OpenSSL Project. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ * software must display the following acknowledgment:
+ * "This product includes software developed by the OpenSSL Project
+ * for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ * endorse or promote products derived from this software without
+ * prior written permission. For written permission, please contact
+ * licensing@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ * nor may "OpenSSL" appear in their names without prior written
+ * permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ * acknowledgment:
+ * "This product includes software developed by the OpenSSL Project
+ * for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com). This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+/* (C) COPYRIGHT International Business Machines Corp. 2001 */
+
+#include <stdio.h>
+#include <openssl/crypto.h>
+#include <openssl/dso.h>
+#include <openssl/engine.h>
+
+#ifndef OPENSSL_NO_HW
+# ifndef OPENSSL_NO_HW_IBMCA
+
+# ifdef FLAT_INC
+# include "ica_openssl_api.h"
+# else
+# include "vendor_defns/ica_openssl_api.h"
+# endif
+
+# define IBMCA_LIB_NAME "ibmca engine"
+# include "hw_ibmca_err.c"
+
+static int ibmca_destroy(ENGINE *e);
+static int ibmca_init(ENGINE *e);
+static int ibmca_finish(ENGINE *e);
+static int ibmca_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f) ());
+
+static const char *IBMCA_F1 = "icaOpenAdapter";
+static const char *IBMCA_F2 = "icaCloseAdapter";
+static const char *IBMCA_F3 = "icaRsaModExpo";
+static const char *IBMCA_F4 = "icaRandomNumberGenerate";
+static const char *IBMCA_F5 = "icaRsaCrt";
+
+ICA_ADAPTER_HANDLE handle = 0;
+
+/* BIGNUM stuff */
+static int ibmca_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+ const BIGNUM *m, BN_CTX *ctx);
+
+static int ibmca_mod_exp_crt(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+ const BIGNUM *q, const BIGNUM *dmp1,
+ const BIGNUM *dmq1, const BIGNUM *iqmp,
+ BN_CTX *ctx);
+
+# ifndef OPENSSL_NO_RSA
+/* RSA stuff */
+static int ibmca_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa);
+# endif
+
+/* This function is aliased to mod_exp (with the mont stuff dropped). */
+static int ibmca_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+ const BIGNUM *m, BN_CTX *ctx,
+ BN_MONT_CTX *m_ctx);
+
+# ifndef OPENSSL_NO_DSA
+/* DSA stuff */
+static int ibmca_dsa_mod_exp(DSA *dsa, BIGNUM *rr, BIGNUM *a1,
+ BIGNUM *p1, BIGNUM *a2, BIGNUM *p2, BIGNUM *m,
+ BN_CTX *ctx, BN_MONT_CTX *in_mont);
+static int ibmca_mod_exp_dsa(DSA *dsa, BIGNUM *r, BIGNUM *a,
+ const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
+ BN_MONT_CTX *m_ctx);
+# endif
+
+# ifndef OPENSSL_NO_DH
+/* DH stuff */
+/* This function is alised to mod_exp (with the DH and mont dropped). */
+static int ibmca_mod_exp_dh(const DH *dh, BIGNUM *r,
+ const BIGNUM *a, const BIGNUM *p,
+ const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
+# endif
+
+/* RAND stuff */
+static int ibmca_rand_bytes(unsigned char *buf, int num);
+static int ibmca_rand_status(void);
+
+/* WJH - check for more commands, like in nuron */
+
+/* The definitions for control commands specific to this engine */
+# define IBMCA_CMD_SO_PATH ENGINE_CMD_BASE
+static const ENGINE_CMD_DEFN ibmca_cmd_defns[] = {
+ {IBMCA_CMD_SO_PATH,
+ "SO_PATH",
+ "Specifies the path to the 'atasi' shared library",
+ ENGINE_CMD_FLAG_STRING},
+ {0, NULL, NULL, 0}
+};
+
+# ifndef OPENSSL_NO_RSA
+/* Our internal RSA_METHOD that we provide pointers to */
+static RSA_METHOD ibmca_rsa = {
+ "Ibmca RSA method",
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ ibmca_rsa_mod_exp,
+ ibmca_mod_exp_mont,
+ NULL,
+ NULL,
+ 0,
+ NULL,
+ NULL,
+ NULL
+};
+# endif
+
+# ifndef OPENSSL_NO_DSA
+/* Our internal DSA_METHOD that we provide pointers to */
+static DSA_METHOD ibmca_dsa = {
+ "Ibmca DSA method",
+ NULL, /* dsa_do_sign */
+ NULL, /* dsa_sign_setup */
+ NULL, /* dsa_do_verify */
+ ibmca_dsa_mod_exp, /* dsa_mod_exp */
+ ibmca_mod_exp_dsa, /* bn_mod_exp */
+ NULL, /* init */
+ NULL, /* finish */
+ 0, /* flags */
+ NULL /* app_data */
+};
+# endif
+
+# ifndef OPENSSL_NO_DH
+/* Our internal DH_METHOD that we provide pointers to */
+static DH_METHOD ibmca_dh = {
+ "Ibmca DH method",
+ NULL,
+ NULL,
+ ibmca_mod_exp_dh,
+ NULL,
+ NULL,
+ 0,
+ NULL
+};
+# endif
+
+static RAND_METHOD ibmca_rand = {
+ /* "IBMCA RAND method", */
+ NULL,
+ ibmca_rand_bytes,
+ NULL,
+ NULL,
+ ibmca_rand_bytes,
+ ibmca_rand_status,
+};
+
+/* Constants used when creating the ENGINE */
+static const char *engine_ibmca_id = "ibmca";
+static const char *engine_ibmca_name = "Ibmca hardware engine support";
+
+/*
+ * This internal function is used by ENGINE_ibmca() and possibly by the
+ * "dynamic" ENGINE support too
+ */
+static int bind_helper(ENGINE *e)
+{
+# ifndef OPENSSL_NO_RSA
+ const RSA_METHOD *meth1;
+# endif
+# ifndef OPENSSL_NO_DSA
+ const DSA_METHOD *meth2;
+# endif
+# ifndef OPENSSL_NO_DH
+ const DH_METHOD *meth3;
+# endif
+ if (!ENGINE_set_id(e, engine_ibmca_id) ||
+ !ENGINE_set_name(e, engine_ibmca_name) ||
+# ifndef OPENSSL_NO_RSA
+ !ENGINE_set_RSA(e, &ibmca_rsa) ||
+# endif
+# ifndef OPENSSL_NO_DSA
+ !ENGINE_set_DSA(e, &ibmca_dsa) ||
+# endif
+# ifndef OPENSSL_NO_DH
+ !ENGINE_set_DH(e, &ibmca_dh) ||
+# endif
+ !ENGINE_set_RAND(e, &ibmca_rand) ||
+ !ENGINE_set_destroy_function(e, ibmca_destroy) ||
+ !ENGINE_set_init_function(e, ibmca_init) ||
+ !ENGINE_set_finish_function(e, ibmca_finish) ||
+ !ENGINE_set_ctrl_function(e, ibmca_ctrl) ||
+ !ENGINE_set_cmd_defns(e, ibmca_cmd_defns))
+ return 0;
+
+# ifndef OPENSSL_NO_RSA
+ /*
+ * We know that the "PKCS1_SSLeay()" functions hook properly to the
+ * ibmca-specific mod_exp and mod_exp_crt so we use those functions. NB:
+ * We don't use ENGINE_openssl() or anything "more generic" because
+ * something like the RSAref code may not hook properly, and if you own
+ * one of these cards then you have the right to do RSA operations on it
+ * anyway!
+ */
+ meth1 = RSA_PKCS1_SSLeay();
+ ibmca_rsa.rsa_pub_enc = meth1->rsa_pub_enc;
+ ibmca_rsa.rsa_pub_dec = meth1->rsa_pub_dec;
+ ibmca_rsa.rsa_priv_enc = meth1->rsa_priv_enc;
+ ibmca_rsa.rsa_priv_dec = meth1->rsa_priv_dec;
+# endif
+
+# ifndef OPENSSL_NO_DSA
+ /*
+ * Use the DSA_OpenSSL() method and just hook the mod_exp-ish bits.
+ */
+ meth2 = DSA_OpenSSL();
+ ibmca_dsa.dsa_do_sign = meth2->dsa_do_sign;
+ ibmca_dsa.dsa_sign_setup = meth2->dsa_sign_setup;
+ ibmca_dsa.dsa_do_verify = meth2->dsa_do_verify;
+# endif
+
+# ifndef OPENSSL_NO_DH
+ /* Much the same for Diffie-Hellman */
+ meth3 = DH_OpenSSL();
+ ibmca_dh.generate_key = meth3->generate_key;
+ ibmca_dh.compute_key = meth3->compute_key;
+# endif
+
+ /* Ensure the ibmca error handling is set up */
+ ERR_load_IBMCA_strings();
+ return 1;
+}
+
+static ENGINE *engine_ibmca(void)
+{
+ ENGINE *ret = ENGINE_new();
+ if (!ret)
+ return NULL;
+ if (!bind_helper(ret)) {
+ ENGINE_free(ret);
+ return NULL;
+ }
+ return ret;
+}
+
+# ifdef ENGINE_DYNAMIC_SUPPORT
+static
+# endif
+void ENGINE_load_ibmca(void)
+{
+ /* Copied from eng_[openssl|dyn].c */
+ ENGINE *toadd = engine_ibmca();
+ if (!toadd)
+ return;
+ ENGINE_add(toadd);
+ ENGINE_free(toadd);
+ ERR_clear_error();
+}
+
+/* Destructor (complements the "ENGINE_ibmca()" constructor) */
+static int ibmca_destroy(ENGINE *e)
+{
+ /*
+ * Unload the ibmca error strings so any error state including our functs
+ * or reasons won't lead to a segfault (they simply get displayed without
+ * corresponding string data because none will be found).
+ */
+ ERR_unload_IBMCA_strings();
+ return 1;
+}
+
+/*
+ * This is a process-global DSO handle used for loading and unloading the
+ * Ibmca library. NB: This is only set (or unset) during an init() or
+ * finish() call (reference counts permitting) and they're operating with
+ * global locks, so this should be thread-safe implicitly.
+ */
+
+static DSO *ibmca_dso = NULL;
+
+/*
+ * These are the function pointers that are (un)set when the library has
+ * successfully (un)loaded.
+ */
+
+static unsigned int (ICA_CALL * p_icaOpenAdapter) ();
+static unsigned int (ICA_CALL * p_icaCloseAdapter) ();
+static unsigned int (ICA_CALL * p_icaRsaModExpo) ();
+static unsigned int (ICA_CALL * p_icaRandomNumberGenerate) ();
+static unsigned int (ICA_CALL * p_icaRsaCrt) ();
+
+/* utility function to obtain a context */
+static int get_context(ICA_ADAPTER_HANDLE * p_handle)
+{
+ unsigned int status = 0;
+
+ status = p_icaOpenAdapter(0, p_handle);
+ if (status != 0)
+ return 0;
+ return 1;
+}
+
+/* similarly to release one. */
+static void release_context(ICA_ADAPTER_HANDLE handle)
+{
+ p_icaCloseAdapter(handle);
+}
+
+/* (de)initialisation functions. */
+static int ibmca_init(ENGINE *e)
+{
+
+ void (*p1) ();
+ void (*p2) ();
+ void (*p3) ();
+ void (*p4) ();
+ void (*p5) ();
+
+ if (ibmca_dso != NULL) {
+ IBMCAerr(IBMCA_F_IBMCA_INIT, IBMCA_R_ALREADY_LOADED);
+ goto err;
+ }
+ /*
+ * Attempt to load libatasi.so/atasi.dll/whatever. Needs to be changed
+ * unfortunately because the Ibmca drivers don't have standard library
+ * names that can be platform-translated well.
+ */
+ /*
+ * TODO: Work out how to actually map to the names the Ibmca drivers
+ * really use - for now a symbollic link needs to be created on the host
+ * system from libatasi.so to atasi.so on unix variants.
+ */
+
+ /* WJH XXX check name translation */
+
+ ibmca_dso = DSO_load(NULL, IBMCA_LIBNAME, NULL,
+ /*
+ * DSO_FLAG_NAME_TRANSLATION
+ */ 0);
+ if (ibmca_dso == NULL) {
+ IBMCAerr(IBMCA_F_IBMCA_INIT, IBMCA_R_DSO_FAILURE);
+ goto err;
+ }
+
+ if (!(p1 = DSO_bind_func(ibmca_dso, IBMCA_F1)) ||
+ !(p2 = DSO_bind_func(ibmca_dso, IBMCA_F2)) ||
+ !(p3 = DSO_bind_func(ibmca_dso, IBMCA_F3)) ||
+ !(p4 = DSO_bind_func(ibmca_dso, IBMCA_F4)) ||
+ !(p5 = DSO_bind_func(ibmca_dso, IBMCA_F5))) {
+ IBMCAerr(IBMCA_F_IBMCA_INIT, IBMCA_R_DSO_FAILURE);
+ goto err;
+ }
+
+ /* Copy the pointers */
+
+ p_icaOpenAdapter = (unsigned int (ICA_CALL *) ())p1;
+ p_icaCloseAdapter = (unsigned int (ICA_CALL *) ())p2;
+ p_icaRsaModExpo = (unsigned int (ICA_CALL *) ())p3;
+ p_icaRandomNumberGenerate = (unsigned int (ICA_CALL *) ())p4;
+ p_icaRsaCrt = (unsigned int (ICA_CALL *) ())p5;
+
+ if (!get_context(&handle)) {
+ IBMCAerr(IBMCA_F_IBMCA_INIT, IBMCA_R_UNIT_FAILURE);
+ goto err;
+ }
+
+ return 1;
+ err:
+ DSO_free(ibmca_dso);
+ p_icaOpenAdapter = NULL;
+ p_icaCloseAdapter = NULL;
+ p_icaRsaModExpo = NULL;
+ p_icaRandomNumberGenerate = NULL;
+
+ return 0;
+}
+
+static int ibmca_finish(ENGINE *e)
+{
+ if (ibmca_dso == NULL) {
+ IBMCAerr(IBMCA_F_IBMCA_FINISH, IBMCA_R_NOT_LOADED);
+ return 0;
+ }
+ release_context(handle);
+ if (!DSO_free(ibmca_dso)) {
+ IBMCAerr(IBMCA_F_IBMCA_FINISH, IBMCA_R_DSO_FAILURE);
+ return 0;
+ }
+ ibmca_dso = NULL;
+
+ return 1;
+}
+
+static int ibmca_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f) ())
+{
+ int initialised = ((ibmca_dso == NULL) ? 0 : 1);
+ switch (cmd) {
+ case IBMCA_CMD_SO_PATH:
+ if (p == NULL) {
+ IBMCAerr(IBMCA_F_IBMCA_CTRL, ERR_R_PASSED_NULL_PARAMETER);
+ return 0;
+ }
+ if (initialised) {
+ IBMCAerr(IBMCA_F_IBMCA_CTRL, IBMCA_R_ALREADY_LOADED);
+ return 0;
+ }
+ IBMCA_LIBNAME = (const char *)p;
+ return 1;
+ default:
+ break;
+ }
+ IBMCAerr(IBMCA_F_IBMCA_CTRL, IBMCA_R_CTRL_COMMAND_NOT_IMPLEMENTED);
+ return 0;
+}
+
+static int ibmca_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+ const BIGNUM *m, BN_CTX *ctx)
+{
+ /*
+ * I need somewhere to store temporary serialised values for use with the
+ * Ibmca API calls. A neat cheat - I'll use BIGNUMs from the BN_CTX but
+ * access their arrays directly as byte arrays <grin>. This way I don't
+ * have to clean anything up.
+ */
+
+ BIGNUM *argument = NULL;
+ BIGNUM *result = NULL;
+ BIGNUM *key = NULL;
+ int to_return;
+ int inLen, outLen, tmpLen;
+
+ ICA_KEY_RSA_MODEXPO *publKey = NULL;
+ unsigned int rc;
+
+ to_return = 0; /* expect failure */
+
+ if (!ibmca_dso) {
+ IBMCAerr(IBMCA_F_IBMCA_MOD_EXP, IBMCA_R_NOT_LOADED);
+ goto err;
+ }
+ /* Prepare the params */
+ BN_CTX_start(ctx);
+ argument = BN_CTX_get(ctx);
+ result = BN_CTX_get(ctx);
+ key = BN_CTX_get(ctx);
+
+ if (!argument || !result || !key) {
+ IBMCAerr(IBMCA_F_IBMCA_MOD_EXP, IBMCA_R_BN_CTX_FULL);
+ goto err;
+ }
+
+ if (!bn_wexpand(argument, m->top) || !bn_wexpand(result, m->top) ||
+ !bn_wexpand(key, sizeof(*publKey) / BN_BYTES)) {
+ IBMCAerr(IBMCA_F_IBMCA_MOD_EXP, IBMCA_R_BN_EXPAND_FAIL);
+ goto err;
+ }
+
+ publKey = (ICA_KEY_RSA_MODEXPO *)key->d;
+
+ if (publKey == NULL) {
+ goto err;
+ }
+ memset(publKey, 0, sizeof(*publKey));
+
+ publKey->keyType = CORRECT_ENDIANNESS(ME_KEY_TYPE);
+ publKey->keyLength = CORRECT_ENDIANNESS(sizeof(ICA_KEY_RSA_MODEXPO));
+ publKey->expOffset = (char *)publKey->keyRecord - (char *)publKey;
+
+ /*
+ * A quirk of the card: the exponent length has to be the same as the
+ * modulus (key) length
+ */
+
+ outLen = BN_num_bytes(m);
+
+/* check for modulus length SAB*/
+ if (outLen > 256) {
+ IBMCAerr(IBMCA_F_IBMCA_MOD_EXP, IBMCA_R_MEXP_LENGTH_TO_LARGE);
+ goto err;
+ }
+/* check for modulus length SAB*/
+
+ publKey->expLength = publKey->nLength = outLen;
+ /*
+ * SAB Check for underflow condition the size of the exponent is less
+ * than the size of the parameter then we have a big problem and will
+ * underflow the keyRecord buffer. Bad stuff could happen then
+ */
+ if (outLen < BN_num_bytes(p)) {
+ IBMCAerr(IBMCA_F_IBMCA_MOD_EXP, IBMCA_R_UNDERFLOW_KEYRECORD);
+ goto err;
+ }
+/* SAB End check for underflow */
+
+ BN_bn2bin(p, &publKey->keyRecord[publKey->expLength - BN_num_bytes(p)]);
+ BN_bn2bin(m, &publKey->keyRecord[publKey->expLength]);
+
+ publKey->modulusBitLength = CORRECT_ENDIANNESS(publKey->nLength * 8);
+ publKey->nOffset = CORRECT_ENDIANNESS(publKey->expOffset +
+ publKey->expLength);
+
+ publKey->expOffset = CORRECT_ENDIANNESS((char *)publKey->keyRecord -
+ (char *)publKey);
+
+ tmpLen = outLen;
+ publKey->expLength = publKey->nLength = CORRECT_ENDIANNESS(tmpLen);
+
+ /* Prepare the argument */
+
+ memset(argument->d, 0, outLen);
+ BN_bn2bin(a, (unsigned char *)argument->d + outLen - BN_num_bytes(a));
+
+ inLen = outLen;
+
+ /* Perform the operation */
+
+ if ((rc = p_icaRsaModExpo(handle, inLen, (unsigned char *)argument->d,
+ publKey, &outLen, (unsigned char *)result->d))
+ != 0) {
+ printf("rc = %d\n", rc);
+ IBMCAerr(IBMCA_F_IBMCA_MOD_EXP, IBMCA_R_REQUEST_FAILED);
+ goto err;
+ }
+
+ /* Convert the response */
+ BN_bin2bn((unsigned char *)result->d, outLen, r);
+ to_return = 1;
+ err:
+ BN_CTX_end(ctx);
+ return to_return;
+}
+
+# ifndef OPENSSL_NO_RSA
+static int ibmca_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa)
+{
+ BN_CTX *ctx;
+ int to_return = 0;
+
+ if ((ctx = BN_CTX_new()) == NULL)
+ goto err;
+ if (!rsa->p || !rsa->q || !rsa->dmp1 || !rsa->dmq1 || !rsa->iqmp) {
+ if (!rsa->d || !rsa->n) {
+ IBMCAerr(IBMCA_F_IBMCA_RSA_MOD_EXP,
+ IBMCA_R_MISSING_KEY_COMPONENTS);
+ goto err;
+ }
+ to_return = ibmca_mod_exp(r0, I, rsa->d, rsa->n, ctx);
+ } else {
+ to_return = ibmca_mod_exp_crt(r0, I, rsa->p, rsa->q, rsa->dmp1,
+ rsa->dmq1, rsa->iqmp, ctx);
+ }
+ err:
+ BN_CTX_free(ctx);
+ return to_return;
+}
+# endif
+
+/* Ein kleines chinesisches "Restessen" */
+static int ibmca_mod_exp_crt(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+ const BIGNUM *q, const BIGNUM *dmp1,
+ const BIGNUM *dmq1, const BIGNUM *iqmp,
+ BN_CTX *ctx)
+{
+
+ BIGNUM *argument = NULL;
+ BIGNUM *result = NULL;
+ BIGNUM *key = NULL;
+
+ int to_return = 0; /* expect failure */
+
+ char *pkey = NULL;
+ ICA_KEY_RSA_CRT *privKey = NULL;
+ int inLen, outLen;
+
+ int rc;
+ unsigned int offset, pSize, qSize;
+/* SAB New variables */
+ unsigned int keyRecordSize;
+ unsigned int pbytes = BN_num_bytes(p);
+ unsigned int qbytes = BN_num_bytes(q);
+ unsigned int dmp1bytes = BN_num_bytes(dmp1);
+ unsigned int dmq1bytes = BN_num_bytes(dmq1);
+ unsigned int iqmpbytes = BN_num_bytes(iqmp);
+
+ /* Prepare the params */
+
+ BN_CTX_start(ctx);
+ argument = BN_CTX_get(ctx);
+ result = BN_CTX_get(ctx);
+ key = BN_CTX_get(ctx);
+
+ if (!argument || !result || !key) {
+ IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT, IBMCA_R_BN_CTX_FULL);
+ goto err;
+ }
+
+ if (!bn_wexpand(argument, p->top + q->top) ||
+ !bn_wexpand(result, p->top + q->top) ||
+ !bn_wexpand(key, sizeof(*privKey) / BN_BYTES)) {
+ IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT, IBMCA_R_BN_EXPAND_FAIL);
+ goto err;
+ }
+
+ privKey = (ICA_KEY_RSA_CRT *)key->d;
+ /*
+ * SAB Add check for total size in bytes of the parms does not exceed the
+ * buffer space we have do this first
+ */
+ keyRecordSize = pbytes + qbytes + dmp1bytes + dmq1bytes + iqmpbytes;
+ if (keyRecordSize > sizeof(privKey->keyRecord)) {
+ IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT, IBMCA_R_OPERANDS_TO_LARGE);
+ goto err;
+ }
+
+ if ((qbytes + dmq1bytes) > 256) {
+ IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT, IBMCA_R_OPERANDS_TO_LARGE);
+ goto err;
+ }
+
+ if (pbytes + dmp1bytes > 256) {
+ IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT, IBMCA_R_OPERANDS_TO_LARGE);
+ goto err;
+ }
+
+/* end SAB additions */
+
+ memset(privKey, 0, sizeof(*privKey));
+ privKey->keyType = CORRECT_ENDIANNESS(CRT_KEY_TYPE);
+ privKey->keyLength = CORRECT_ENDIANNESS(sizeof(ICA_KEY_RSA_CRT));
+ privKey->modulusBitLength = CORRECT_ENDIANNESS(BN_num_bytes(q) * 2 * 8);
+
+ /*
+ * p,dp & qInv are 1 QWORD Larger
+ */
+ privKey->pLength = CORRECT_ENDIANNESS(BN_num_bytes(p) + 8);
+ privKey->qLength = CORRECT_ENDIANNESS(BN_num_bytes(q));
+ privKey->dpLength = CORRECT_ENDIANNESS(BN_num_bytes(dmp1) + 8);
+ privKey->dqLength = CORRECT_ENDIANNESS(BN_num_bytes(dmq1));
+ privKey->qInvLength = CORRECT_ENDIANNESS(BN_num_bytes(iqmp) + 8);
+
+ offset = (char *)privKey->keyRecord - (char *)privKey;
+
+ qSize = BN_num_bytes(q);
+ pSize = qSize + 8; /* 1 QWORD larger */
+
+ /*
+ * SAB probably aittle redundant, but we'll verify that each of the
+ * components which make up a key record sent ot the card does not exceed
+ * the space that is allocated for it. this handles the case where even
+ * if the total length does not exceed keyrecord zied, if the operands are
+ * funny sized they could cause potential side affects on either the card
+ * or the result
+ */
+
+ if ((pbytes > pSize) || (dmp1bytes > pSize) ||
+ (iqmpbytes > pSize) || (qbytes > qSize) || (dmq1bytes > qSize)) {
+ IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT, IBMCA_R_OPERANDS_TO_LARGE);
+ goto err;
+
+ }
+
+ privKey->dpOffset = CORRECT_ENDIANNESS(offset);
+
+ offset += pSize;
+ privKey->dqOffset = CORRECT_ENDIANNESS(offset);
+
+ offset += qSize;
+ privKey->pOffset = CORRECT_ENDIANNESS(offset);
+
+ offset += pSize;
+ privKey->qOffset = CORRECT_ENDIANNESS(offset);
+
+ offset += qSize;
+ privKey->qInvOffset = CORRECT_ENDIANNESS(offset);
+
+ pkey = (char *)privKey->keyRecord;
+
+/* SAB first check that we don;t under flow the buffer */
+ if (pSize < pbytes) {
+ IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT, IBMCA_R_UNDERFLOW_CONDITION);
+ goto err;
+ }
+
+ /* pkey += pSize - BN_num_bytes(p); WROING this should be dmp1) */
+ pkey += pSize - BN_num_bytes(dmp1);
+ BN_bn2bin(dmp1, pkey);
+ pkey += BN_num_bytes(dmp1); /* move the pointer */
+
+ BN_bn2bin(dmq1, pkey); /* Copy over dmq1 */
+
+ pkey += qSize; /* move pointer */
+ /* set up for zero padding of next field */
+ pkey += pSize - BN_num_bytes(p);
+
+ BN_bn2bin(p, pkey);
+ /* increment pointer by number of bytes moved */
+ pkey += BN_num_bytes(p);
+
+ BN_bn2bin(q, pkey);
+ pkey += qSize; /* move the pointer */
+ pkey += pSize - BN_num_bytes(iqmp); /* Adjust for padding */
+ BN_bn2bin(iqmp, pkey);
+
+ /* Prepare the argument and response */
+
+ /*
+ * Correct endianess is used because the fields were converted above
+ */
+ outLen = CORRECT_ENDIANNESS(privKey->qLength) * 2;
+
+ if (outLen > 256) {
+ IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT, IBMCA_R_OUTLEN_TO_LARGE);
+ goto err;
+ }
+
+ /* SAB check for underflow here on the argeument */
+ if (outLen < BN_num_bytes(a)) {
+ IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT, IBMCA_R_UNDERFLOW_CONDITION);
+ goto err;
+ }
+
+ BN_bn2bin(a, (unsigned char *)argument->d + outLen - BN_num_bytes(a));
+ inLen = outLen;
+
+ memset(result->d, 0, outLen);
+
+ /* Perform the operation */
+
+ if ((rc = p_icaRsaCrt(handle, inLen, (unsigned char *)argument->d,
+ privKey, &outLen, (unsigned char *)result->d)) != 0)
+ {
+ printf("rc = %d\n", rc);
+ IBMCAerr(IBMCA_F_IBMCA_MOD_EXP_CRT, IBMCA_R_REQUEST_FAILED);
+ goto err;
+ }
+
+ /* Convert the response */
+
+ BN_bin2bn((unsigned char *)result->d, outLen, r);
+ to_return = 1;
+
+ err:
+ BN_CTX_end(ctx);
+ return to_return;
+
+}
+
+# ifndef OPENSSL_NO_DSA
+/*
+ * This code was liberated and adapted from the commented-out code in
+ * dsa_ossl.c. Because of the unoptimised form of the Ibmca acceleration (it
+ * doesn't have a CRT form for RSA), this function means that an Ibmca system
+ * running with a DSA server certificate can handshake around 5 or 6 times
+ * faster/more than an equivalent system running with RSA. Just check out the
+ * "signs" statistics from the RSA and DSA parts of "openssl speed -engine
+ * ibmca dsa1024 rsa1024".
+ */
+static int ibmca_dsa_mod_exp(DSA *dsa, BIGNUM *rr, BIGNUM *a1,
+ BIGNUM *p1, BIGNUM *a2, BIGNUM *p2, BIGNUM *m,
+ BN_CTX *ctx, BN_MONT_CTX *in_mont)
+{
+ BIGNUM t;
+ int to_return = 0;
+
+ BN_init(&t);
+ /* let rr = a1 ^ p1 mod m */
+ if (!ibmca_mod_exp(rr, a1, p1, m, ctx))
+ goto end;
+ /* let t = a2 ^ p2 mod m */
+ if (!ibmca_mod_exp(&t, a2, p2, m, ctx))
+ goto end;
+ /* let rr = rr * t mod m */
+ if (!BN_mod_mul(rr, rr, &t, m, ctx))
+ goto end;
+ to_return = 1;
+ end:
+ BN_free(&t);
+ return to_return;
+}
+
+static int ibmca_mod_exp_dsa(DSA *dsa, BIGNUM *r, BIGNUM *a,
+ const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
+ BN_MONT_CTX *m_ctx)
+{
+ return ibmca_mod_exp(r, a, p, m, ctx);
+}
+# endif
+
+/* This function is aliased to mod_exp (with the mont stuff dropped). */
+static int ibmca_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
+ const BIGNUM *m, BN_CTX *ctx,
+ BN_MONT_CTX *m_ctx)
+{
+ return ibmca_mod_exp(r, a, p, m, ctx);
+}
+
+# ifndef OPENSSL_NO_DH
+/* This function is aliased to mod_exp (with the dh and mont dropped). */
+static int ibmca_mod_exp_dh(DH const *dh, BIGNUM *r,
+ const BIGNUM *a, const BIGNUM *p,
+ const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
+{
+ return ibmca_mod_exp(r, a, p, m, ctx);
+}
+# endif
+
+/* Random bytes are good */
+static int ibmca_rand_bytes(unsigned char *buf, int num)
+{
+ int to_return = 0; /* assume failure */
+ unsigned int ret;
+
+ if (handle == 0) {
+ IBMCAerr(IBMCA_F_IBMCA_RAND_BYTES, IBMCA_R_NOT_INITIALISED);
+ goto err;
+ }
+
+ ret = p_icaRandomNumberGenerate(handle, num, buf);
+ if (ret < 0) {
+ IBMCAerr(IBMCA_F_IBMCA_RAND_BYTES, IBMCA_R_REQUEST_FAILED);
+ goto err;
+ }
+ to_return = 1;
+ err:
+ return to_return;
+}
+
+static int ibmca_rand_status(void)
+{
+ return 1;
+}
+
+/*
+ * This stuff is needed if this ENGINE is being compiled into a
+ * self-contained shared-library.
+ */
+# ifdef ENGINE_DYNAMIC_SUPPORT
+static int bind_fn(ENGINE *e, const char *id)
+{
+ if (id && (strcmp(id, engine_ibmca_id) != 0)) /* WJH XXX */
+ return 0;
+ if (!bind_helper(e))
+ return 0;
+ return 1;
+}
+
+IMPLEMENT_DYNAMIC_CHECK_FN()
+ IMPLEMENT_DYNAMIC_BIND_FN(bind_fn)
+# endif /* ENGINE_DYNAMIC_SUPPORT */
+# endif /* !OPENSSL_NO_HW_IBMCA */
+#endif /* !OPENSSL_NO_HW */
projects / openssl.git / blobdiff